VTY shell ********* *vtysh* provides a combined frontend to all FRR daemons in a single combined session. It is enabled by default at build time, but can be disabled through the "--disable-vtysh" option to the configure script. *vtysh* has a configuration file, "vtysh.conf". The location of that file cannot be changed from /etc/frr since it contains options controlling authentication behavior. This file will also not be written by configuration-save commands, it is intended to be updated manually by an administrator with an external editor. Warning: This also means the "hostname" and "banner motd" commands (which both do have effect for vtysh) need to be manually updated in "vtysh.conf". Pager usage =========== *vtysh* can call an external paging program (e.g. *more* or *less*) to paginate long output from commands. This feature used to be enabled by default but is now controlled by the "VTYSH_PAGER" environment variable and the "terminal paginate" command: VTYSH_PAGER If set, the "VTYSH_PAGER" environment variable causes *vtysh* to pipe output from commands through the given command. Note that this happens regardless of the length of the output. As such, standard pager behavior (particularly waiting at the end of output) tends to be annoying to the user. Using "less -EFX" is recommended for a better user experience. If this environment variable is unset, *vtysh* defaults to not using any pager. This variable should be set by the user according to their preferences, in their "~/.profile" file. [no] terminal paginate Enables/disables vtysh output pagination. This command is intended to be placed in "vtysh.conf" to set a system-wide default. If this is enabled but "VTYSH_PAGER" is not set, the system default pager (likely "more" or "/usr/bin/pager") will be used. Permissions and setup requirements ================================== *vtysh* connects to running daemons through Unix sockets located in /var/run/frr. Running vtysh thus requires access to that directory, plus membership in the frrvty group (which is the group that the daemons will change ownership of their sockets to). To restrict access to FRR configuration, make sure no unauthorized users are members of the frrvty group. Warning: VTYSH implements a CLI option "-u, --user" that disallows entering the characters "en" on the command line, which ideally restricts access to configuration commands. However, VTYSH was never designed to be a privilege broker and is not built using secure coding practices. No guarantees of security are provided for this option and under no circumstances should this option be used to provide any semblance of security or read-only access to FRR. PAM support (experimental) -------------------------- vtysh has working (but rather useless) PAM support. It will perform an "authenticate" PAM call using frr as service name. No other (accounting, session, password change) calls will be performed by vtysh. Users using vtysh still need to have appropriate access to the daemons' VTY sockets, usually by being member of the frrvty group. If they have this membership, PAM support is useless since they can connect to daemons and issue commands using some other tool. Alternatively, the *vtysh* binary could be made SGID (set group ID) to the frrvty group. Warning: No security guarantees are made for this configuration. username USERNAME nopassword If PAM support is enabled at build-time, this command allows disabling the use of PAM on a per-user basis. If vtysh finds that an user is trying to use vtysh and a "nopassword" entry is found, no calls to PAM will be made at all. Integrated configuration mode ============================= Integrated configuration mode uses a single configuration file, "frr.conf", for all daemons. This replaces the individual files like "zebra.conf" or "bgpd.conf". "frr.conf" is located in /etc/frr. All daemons check for the existence of this file at startup, and if it exists will not load their individual configuration files. Instead, "vtysh -b" must be invoked to process "frr.conf" and apply its settings to the individual daemons. Warning: *vtysh -b* must also be executed after restarting any daemon. Configuration saving, file ownership and permissions ---------------------------------------------------- The "frr.conf" file is not written by any of the daemons; instead *vtysh* contains the necessary logic to collect configuration from all of the daemons, combine it and write it out. Warning: Daemons must be running for *vtysh* to be able to collect their configuration. Any configuration from non-running daemons is permanently lost after doing a configuration save. Since the *vtysh* command may be running as ordinary user on the system, configuration writes will be tried through *watchfrr*, using the "write integrated" command internally. Since *watchfrr* is running as superuser, *vtysh* is able to ensure correct ownership and permissions on "frr.conf". If *watchfrr* is not running or the configuration write fails, *vtysh* will attempt to directly write to the file. This is likely to fail if running as unprivileged user; alternatively it may leave the file with incorrect owner or permissions. Writing the configuration can be triggered directly by invoking *vtysh -w*. This may be useful for scripting. Note this command should be run as either the superuser or the FRR user. We recommend you do not mix the use of the two types of files. Further, it is better not to use the integrated "frr.conf" file, as any syntax error in it can lead to /all/ of your daemons being unable to start up. Per daemon files are more robust as impact of errors in configuration are limited to the daemon in whose file the error is made. service integrated-vtysh-config no service integrated-vtysh-config Control whether integrated "frr.conf" file is written when 'write file' is issued. These commands need to be placed in "vtysh.conf" to have any effect. Note that since "vtysh.conf" is not written by FRR itself, they therefore need to be manually placed in that file. This command has 3 states: service integrated-vtysh-config *vtysh* will always write "frr.conf". no service integrated-vtysh-config *vtysh* will never write "frr.conf"; instead it will ask daemons to write their individual configuration files. Neither option present (default) *vtysh* will check whether "frr.conf" exists. If it does, configuration writes will update that file. Otherwise, writes are performed through the individual daemons. This command is primarily intended for packaging/distribution purposes, to preset one of the two operating modes and ensure consistent operation across installations. write integrated Unconditionally (regardless of "service integrated-vtysh-config" setting) write out integrated "frr.conf" file through *watchfrr*. If *watchfrr* is not running, this command is unavailable. Warning: Configuration changes made while some daemon is not running will be invisible to that daemon. The daemon will start up with its saved configuration (either in its individual configuration file, or in "frr.conf"). This is particularly troublesome for route-maps and prefix lists, which would otherwise be synchronized between daemons.