===========================================================
.___ __ __
_________________ __ __ __| _/|__|/ |_
/ ___\_` __ \__ \ | | \/ __ | | \\_ __\
/ /_/ > | \// __ \| | / /_/ | | || |
\___ /|__| (____ /____/\____ | |__||__|
/_____/ \/ \/
grep rough audit - static analysis tool
v2.8 written by @Wireghoul
=================================[justanotherhacker.com]===
freecad-0.18.4+dfsg2/cMake/FindKDL.cmake-6-
freecad-0.18.4+dfsg2/cMake/FindKDL.cmake:7:#INCLUDE (${PROJECT_SOURCE_DIR}/config/FindPkgConfig.cmake)
freecad-0.18.4+dfsg2/cMake/FindKDL.cmake-8-
##############################################
freecad-0.18.4+dfsg2/src/Main/MainGui.cpp-367- // change the stack only if the selectors are the same (this is the case for Win32)
freecad-0.18.4+dfsg2/src/Main/MainGui.cpp:368: //__asm push offset MyStack[1024*128];
freecad-0.18.4+dfsg2/src/Main/MainGui.cpp:369: //__asm pop esp;
freecad-0.18.4+dfsg2/src/Main/MainGui.cpp:370: __asm mov eax,offset MyStack[1024*128];
freecad-0.18.4+dfsg2/src/Main/MainGui.cpp:371: __asm mov esp,eax;
freecad-0.18.4+dfsg2/src/Main/MainGui.cpp-372- }
##############################################
freecad-0.18.4+dfsg2/src/Main/MainPy.cpp-110-#if PY_MAJOR_VERSION >= 3
freecad-0.18.4+dfsg2/src/Main/MainPy.cpp:111: int ret = dladdr((void*)PyInit_FreeCAD, &info);
freecad-0.18.4+dfsg2/src/Main/MainPy.cpp-112-#else
freecad-0.18.4+dfsg2/src/Main/MainPy.cpp:113: int ret = dladdr((void*)initFreeCAD, &info);
freecad-0.18.4+dfsg2/src/Main/MainPy.cpp-114-#endif
##############################################
freecad-0.18.4+dfsg2/src/App/Application.cpp-1186- Dl_info info;
freecad-0.18.4+dfsg2/src/App/Application.cpp:1187: if (dladdr(callstack[i], &info) && info.dli_sname && info.dli_fname) {
freecad-0.18.4+dfsg2/src/App/Application.cpp-1188- if (info.dli_sname[0] == '_') {
##############################################
freecad-0.18.4+dfsg2/src/Mod/Assembly/Gui/CommandConstraints.cpp-74-
freecad-0.18.4+dfsg2/src/Mod/Assembly/Gui/CommandConstraints.cpp:75: *Asm = static_cast<Assembly::Product*>(ActiveAsmObject);
freecad-0.18.4+dfsg2/src/Mod/Assembly/Gui/CommandConstraints.cpp-76-
##############################################
freecad-0.18.4+dfsg2/src/Mod/Assembly/Gui/CommandConstraints.cpp-128-{
freecad-0.18.4+dfsg2/src/Mod/Assembly/Gui/CommandConstraints.cpp:129: //Assembly::ProductRef* Asm = 0;
freecad-0.18.4+dfsg2/src/Mod/Assembly/Gui/CommandConstraints.cpp-130- //Assembly::ConstraintGroup* ConstGrp = 0;
##############################################
freecad-0.18.4+dfsg2/src/Mod/Assembly/Gui/CommandConstraints.cpp-212-{
freecad-0.18.4+dfsg2/src/Mod/Assembly/Gui/CommandConstraints.cpp:213: //Assembly::ProductRef* Asm = 0;
freecad-0.18.4+dfsg2/src/Mod/Assembly/Gui/CommandConstraints.cpp-214- //Assembly::ConstraintGroup* ConstGrp = 0;
##############################################
freecad-0.18.4+dfsg2/src/Mod/Assembly/Gui/CommandConstraints.cpp-279-{
freecad-0.18.4+dfsg2/src/Mod/Assembly/Gui/CommandConstraints.cpp:280: //Assembly::ProductRef* Asm = 0;
freecad-0.18.4+dfsg2/src/Mod/Assembly/Gui/CommandConstraints.cpp-281- //Assembly::ConstraintGroup* ConstGrp = 0;
##############################################
freecad-0.18.4+dfsg2/src/Mod/Assembly/Gui/CommandConstraints.cpp-344-{
freecad-0.18.4+dfsg2/src/Mod/Assembly/Gui/CommandConstraints.cpp:345: //Assembly::ProductRef* Asm = 0;
freecad-0.18.4+dfsg2/src/Mod/Assembly/Gui/CommandConstraints.cpp-346- //Assembly::ConstraintGroup* ConstGrp = 0;
##############################################
freecad-0.18.4+dfsg2/src/Mod/Assembly/Gui/CommandConstraints.cpp-413-{
freecad-0.18.4+dfsg2/src/Mod/Assembly/Gui/CommandConstraints.cpp:414: //Assembly::ProductRef* Asm = 0;
freecad-0.18.4+dfsg2/src/Mod/Assembly/Gui/CommandConstraints.cpp-415- //Assembly::ConstraintGroup* ConstGrp = 0;
##############################################
freecad-0.18.4+dfsg2/src/Mod/Assembly/Gui/CommandConstraints.cpp-481-{
freecad-0.18.4+dfsg2/src/Mod/Assembly/Gui/CommandConstraints.cpp:482: //Assembly::ProductRef* Asm = 0;
freecad-0.18.4+dfsg2/src/Mod/Assembly/Gui/CommandConstraints.cpp-483- //Assembly::ConstraintGroup* ConstGrp = 0;
##############################################
freecad-0.18.4+dfsg2/src/Mod/Assembly/Gui/CommandConstraints.cpp-549-{
freecad-0.18.4+dfsg2/src/Mod/Assembly/Gui/CommandConstraints.cpp:550: //Assembly::ProductRef* Asm = 0;
freecad-0.18.4+dfsg2/src/Mod/Assembly/Gui/CommandConstraints.cpp-551- //Assembly::ConstraintGroup* ConstGrp = 0;
##############################################
freecad-0.18.4+dfsg2/src/Base/StackWalker.h-196- c.ContextFlags = contextFlags; \
freecad-0.18.4+dfsg2/src/Base/StackWalker.h:197: __asm call x \
freecad-0.18.4+dfsg2/src/Base/StackWalker.h:198: __asm x: pop eax \
freecad-0.18.4+dfsg2/src/Base/StackWalker.h:199: __asm mov c.Eip, eax \
freecad-0.18.4+dfsg2/src/Base/StackWalker.h:200: __asm mov c.Ebp, ebp \
freecad-0.18.4+dfsg2/src/Base/StackWalker.h:201: __asm mov c.Esp, esp \
freecad-0.18.4+dfsg2/src/Base/StackWalker.h-202- } while(0);
##############################################
freecad-0.18.4+dfsg2/src/3rdParty/salomesmesh/src/SMESH/SMESH_MeshEditor.cpp-9822- {
freecad-0.18.4+dfsg2/src/3rdParty/salomesmesh/src/SMESH/SMESH_MeshEditor.cpp:9823: SMESHDS_SubMesh *aSM = 0;
freecad-0.18.4+dfsg2/src/3rdParty/salomesmesh/src/SMESH/SMESH_MeshEditor.cpp-9824- removeQuadElem( aSM, GetMeshDS()->elementsIterator(), 0 );
##############################################
freecad-0.18.4+dfsg2/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_Penta_3D.cpp-170- ASSERT(aSubMesh);
freecad-0.18.4+dfsg2/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_Penta_3D.cpp:171: SMESHDS_SubMesh *aSM = aSubMesh->GetSubMeshDS();
freecad-0.18.4+dfsg2/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_Penta_3D.cpp-172- if(!myCreateQuadratic) {
##############################################
freecad-0.18.4+dfsg2/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_Penta_3D.cpp-194- ASSERT(aSubMesh);
freecad-0.18.4+dfsg2/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_Penta_3D.cpp:195: SMESHDS_SubMesh *aSM = aSubMesh->GetSubMeshDS();
freecad-0.18.4+dfsg2/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_Penta_3D.cpp-196- if(!myCreateQuadratic) {
##############################################
freecad-0.18.4+dfsg2/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_Penta_3D.cpp-1035- ASSERT(aSubMesh);
freecad-0.18.4+dfsg2/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_Penta_3D.cpp:1036: SMESHDS_SubMesh *aSM = aSubMesh->GetSubMeshDS();
freecad-0.18.4+dfsg2/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_Penta_3D.cpp-1037- SMDS_ElemIteratorPtr itf = aSM->GetElements();
##############################################
freecad-0.18.4+dfsg2/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_Penta_3D.cpp-1131- SMESH_subMesh *aSubMesh = pMesh->GetSubMeshContaining(aF);
freecad-0.18.4+dfsg2/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_Penta_3D.cpp:1132: SMESHDS_SubMesh *aSM = aSubMesh->GetSubMeshDS();
freecad-0.18.4+dfsg2/src/3rdParty/salomesmesh/src/StdMeshers/StdMeshers_Penta_3D.cpp-1133- SMDS_ElemIteratorPtr itf = aSM->GetElements();
##############################################
freecad-0.18.4+dfsg2/src/3rdParty/salomesmesh/inc/SMESH_MeshVSLink.hxx-94- Standard_EXPORT Standard_Boolean GetGroup(const Standard_Integer Id,MeshVS_EntityType& Type,TColStd_PackedMapOfInteger& Ids) const;
freecad-0.18.4+dfsg2/src/3rdParty/salomesmesh/inc/SMESH_MeshVSLink.hxx:95: Standard_EXPORT Standard_Address GetGroupAddr(const Standard_Integer ID) const;
freecad-0.18.4+dfsg2/src/3rdParty/salomesmesh/inc/SMESH_MeshVSLink.hxx-96- Standard_EXPORT Standard_Boolean IsAdvancedSelectionEnabled() const;
##############################################
freecad-0.18.4+dfsg2/src/3rdParty/salomesmesh/inc/SMESH_MeshVSLink.hxx-116- //! This method returns by number an address of any entity which represents element or node data structure. <br>
freecad-0.18.4+dfsg2/src/3rdParty/salomesmesh/inc/SMESH_MeshVSLink.hxx:117: Standard_EXPORT Standard_Address GetAddr(const Standard_Integer ID,const Standard_Boolean IsElement) const override;
freecad-0.18.4+dfsg2/src/3rdParty/salomesmesh/inc/SMESH_MeshVSLink.hxx-118-
##############################################
freecad-0.18.4+dfsg2/vagrant/Xenial/generate_yaml.sh-8-lib_list=`ls /opt/local/FreeCAD-0.17/lib/*.so`
freecad-0.18.4+dfsg2/vagrant/Xenial/generate_yaml.sh:9:mod_list=`ls -ltd $(find /opt/local/FreeCAD-0.17/Mod) | awk '{ print $9}'`
freecad-0.18.4+dfsg2/vagrant/Xenial/generate_yaml.sh:10:bin_list=`ls -ltd $(find /opt/local/FreeCAD-0.17/bin) | awk '{ print $9}'`
freecad-0.18.4+dfsg2/vagrant/Xenial/generate_yaml.sh:11:data_list=`ls -ltd $(find /opt/local/FreeCAD-0.17/data) | awk '{ print $9}'`
freecad-0.18.4+dfsg2/vagrant/Xenial/generate_yaml.sh:12:python_list=`ls -ltd $(find /usr/lib/python2.7) | awk '{ print $9}'`
freecad-0.18.4+dfsg2/vagrant/Xenial/generate_yaml.sh:13:pyside_list=`ls -ltd $(find /usr/share/PySide/typesystems) | awk '{ print $9}'`
freecad-0.18.4+dfsg2/vagrant/Xenial/generate_yaml.sh-14-python_binary=`ls /usr/bin/python /usr/bin/py*2.7`
freecad-0.18.4+dfsg2/vagrant/Xenial/generate_yaml.sh:15:syslib=`ls -ltd $(find /usr/lib/x86_64-linux-gnu/dri) | awk '{ print $9}'`
freecad-0.18.4+dfsg2/vagrant/Xenial/generate_yaml.sh:16:syslib2=`ls -ltd $(find /usr/lib/x86_64-linux-gnu/gtk-2.0) | awk '{ print $9}'`
freecad-0.18.4+dfsg2/vagrant/Xenial/generate_yaml.sh:17:syslib3=`ls -ltd $(find /usr/lib/x86_64-linux-gnu/gdk-pixbuf-2.0) | awk '{ print $9}'`
freecad-0.18.4+dfsg2/vagrant/Xenial/generate_yaml.sh:18:syslib4=`ls -ltd $(find /usr/lib/locale) | awk '{ print $9}'`
freecad-0.18.4+dfsg2/vagrant/Xenial/generate_yaml.sh:19:syslib5=`ls -ltd $(find /usr/share/X11/locale) | awk '{ print $9}'`
freecad-0.18.4+dfsg2/vagrant/Xenial/generate_yaml.sh:20:syslib6=`ls -ltd $(find /usr/lib/x86_64-linux-gnu/*gtk*) | awk '{ print $9}'`
freecad-0.18.4+dfsg2/vagrant/Xenial/generate_yaml.sh:21:syslib7=`ls -ltd $(find /usr/share/glib-2.0) | awk '{ print $9}'`
freecad-0.18.4+dfsg2/vagrant/Xenial/generate_yaml.sh:22:syslib8=`ls -ltd $(find /usr/share/i18n/locales) | awk '{ print $9}'`
freecad-0.18.4+dfsg2/vagrant/Xenial/generate_yaml.sh-23-echo "
##############################################
freecad-0.18.4+dfsg2/vagrant/Xenial/generate_yaml.sh-37- then
freecad-0.18.4+dfsg2/vagrant/Xenial/generate_yaml.sh:38: second_name=`echo $i | sed 's/\///'`
freecad-0.18.4+dfsg2/vagrant/Xenial/generate_yaml.sh-39- echo " $i : $second_name" >> snapcraft.yaml
##############################################
freecad-0.18.4+dfsg2/vagrant/Xenial/generate_yaml.sh-43-do
freecad-0.18.4+dfsg2/vagrant/Xenial/generate_yaml.sh:44: second_name=`echo $i | sed 's/\///'`
freecad-0.18.4+dfsg2/vagrant/Xenial/generate_yaml.sh-45- echo " $i : $second_name" >> snapcraft.yaml
##############################################
freecad-0.18.4+dfsg2/vagrant/Xenial/generate_yaml.sh-50- then
freecad-0.18.4+dfsg2/vagrant/Xenial/generate_yaml.sh:51: second_name=`echo $i | sed 's/\///'`
freecad-0.18.4+dfsg2/vagrant/Xenial/generate_yaml.sh-52- echo " $i : $second_name" >> snapcraft.yaml
##############################################
freecad-0.18.4+dfsg2/vagrant/Xenial/generate_yaml.sh-58- then
freecad-0.18.4+dfsg2/vagrant/Xenial/generate_yaml.sh:59: second_name=`echo $i | sed 's/\///'`
freecad-0.18.4+dfsg2/vagrant/Xenial/generate_yaml.sh-60- echo " $i : $second_name" >> snapcraft.yaml
##############################################
freecad-0.18.4+dfsg2/vagrant/Xenial/generate_yaml.sh-66- then
freecad-0.18.4+dfsg2/vagrant/Xenial/generate_yaml.sh:67: second_name=`echo $i | sed 's/\///'`
freecad-0.18.4+dfsg2/vagrant/Xenial/generate_yaml.sh-68- echo " $i : $second_name" >> snapcraft.yaml
##############################################
freecad-0.18.4+dfsg2/vagrant/Xenial/generate_yaml.sh-74- then
freecad-0.18.4+dfsg2/vagrant/Xenial/generate_yaml.sh:75: second_name=`echo $i | sed 's/\///'`
freecad-0.18.4+dfsg2/vagrant/Xenial/generate_yaml.sh-76- echo " $i : $second_name" >> snapcraft.yaml
##############################################
freecad-0.18.4+dfsg2/vagrant/Xenial/generate_yaml.sh-82- then
freecad-0.18.4+dfsg2/vagrant/Xenial/generate_yaml.sh:83: second_name=`echo $i | sed 's/\///'`
freecad-0.18.4+dfsg2/vagrant/Xenial/generate_yaml.sh-84- echo " $i : $second_name" >> snapcraft.yaml
##############################################
freecad-0.18.4+dfsg2/vagrant/Xenial/generate_yaml.sh-96-do
freecad-0.18.4+dfsg2/vagrant/Xenial/generate_yaml.sh:97: second_name=`echo $i | sed 's/\///'`
freecad-0.18.4+dfsg2/vagrant/Xenial/generate_yaml.sh-98- echo " - $second_name" >> snapcraft.yaml
##############################################
freecad-0.18.4+dfsg2/vagrant/FreeCAD.sh-26-echo "Description:TEST PACKAGE" >> /tmp/$1-$2/DEBIAN/control
freecad-0.18.4+dfsg2/vagrant/FreeCAD.sh:27:file_list=`ls -ltd $(find /opt/local/FreeCAD-0.17) | awk '{ print $9}'`
freecad-0.18.4+dfsg2/vagrant/FreeCAD.sh-28-for file in $file_list
freecad-0.18.4+dfsg2/vagrant/FreeCAD.sh-29-do
freecad-0.18.4+dfsg2/vagrant/FreeCAD.sh:30: is_done=`cat /tmp/stage | grep $file`
freecad-0.18.4+dfsg2/vagrant/FreeCAD.sh-31-if [ "$is_done" == "" ]
##############################################
freecad-0.18.4+dfsg2/vagrant/FreeCAD.sh-47-
freecad-0.18.4+dfsg2/vagrant/FreeCAD.sh:48:is_ubuntu=`lsb_release -a | grep -i Distributor | awk '{ print $3}'`
freecad-0.18.4+dfsg2/vagrant/FreeCAD.sh-49-if [ "$is_ubuntu" == "Ubuntu" ]
freecad-0.18.4+dfsg2/vagrant/FreeCAD.sh-50-then
freecad-0.18.4+dfsg2/vagrant/FreeCAD.sh:51: ubuntu_version=`lsb_release -a | grep -i codename | awk '{ print $2 }'`
freecad-0.18.4+dfsg2/vagrant/FreeCAD.sh-52- if [ "$ubuntu_version" == "xenial" ]
##############################################
freecad-0.18.4+dfsg2/vagrant/FreeCAD.sh-134-sudo apt-get install -y libcanberra-gtk3-module overlay-scrollbar-gtk2 unity-gtk-module-common libatk-bridge2.0-0 unity-gtk2-module libatk-adaptor
freecad-0.18.4+dfsg2/vagrant/FreeCAD.sh:135:myversion=`lsb_release -a | grep -i Distributor | awk '{ print $3}'`
freecad-0.18.4+dfsg2/vagrant/FreeCAD.sh-136-if [ "$myversion" != "Ubuntu" ]
##############################################
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh-8-lib_list=`ls /opt/local/FreeCAD-0.17/lib/*.so`
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh:9:mod_list=`ls -ltd $(find /opt/local/FreeCAD-0.17/Mod) | awk '{ print $9}'`
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh:10:bin_list=`ls -ltd $(find /opt/local/FreeCAD-0.17/bin) | awk '{ print $9}'`
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh:11:data_list=`ls -ltd $(find /opt/local/FreeCAD-0.17/data) | awk '{ print $9}'`
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh:12:python_list=`ls -ltd $(find /usr/lib/python2.7) | awk '{ print $9}'`
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh:13:pyside_list=`ls -ltd $(find /usr/share/PySide/typesystems) | awk '{ print $9}'`
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh-14-python_binary=`ls /usr/bin/python /usr/bin/py*2.7`
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh:15:syslib=`ls -ltd $(find /usr/lib/x86_64-linux-gnu/dri) | awk '{ print $9}'`
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh:16:syslib2=`ls -ltd $(find /usr/lib/x86_64-linux-gnu/gtk-2.0) | awk '{ print $9}'`
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh:17:syslib3=`ls -ltd $(find /usr/lib/x86_64-linux-gnu/gdk-pixbuf-2.0) | awk '{ print $9}'`
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh:18:syslib4=`ls -ltd $(find /usr/lib/locale) | awk '{ print $9}'`
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh:19:syslib5=`ls -ltd $(find /usr/share/X11/locale) | awk '{ print $9}'`
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh:20:syslib6=`ls -ltd $(find /usr/lib/x86_64-linux-gnu/*gtk*) | awk '{ print $9}'`
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh:21:syslib7=`ls -ltd $(find /usr/share/glib-2.0) | awk '{ print $9}'`
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh:22:syslib8=`ls -ltd $(find /usr/share/i18n/) | awk '{ print $9}'`
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh-23-syslib9=`ls /usr/bin/locale*`
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh:24:syslib10=`ls -ltd $(find /usr/share/matplotlib/mpl-data/) | awk '{ print $9}'`
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh:25:syslib11=`ls -ltd $(find /usr/lib/x86_64-linux-gnu/gio) | awk '{ print $9}'`
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh-26-bin_list2=`ls /usr/bin/dconf`
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh:27:dconf_list=`ls -ltd $(find /usr/lib/dconf) | awk '{ print $9}'`
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh:28:fonts_list=`ls -ltd $(find /usr/share/fonts/truetype/dejavu) | awk '{ print $9}'`
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh-29-calculix_list=`ls /usr/bin/ccx /usr/lib/x86_64-linux-gnu/libspool* /usr/lib/libmp* /usr/lib/libarpack* /usr/lib/liblapack* /usr/lib/x86_64-linux-gnu/libgfort* /usr/lib/x86_64-linux-gnu/libgom* /usr/lib/libblas.so* /usr/lib/x86_64-linux-gnu/libquadm* /usr/lib/libopen-* /usr/lib/x86_64-linux-gnu/libhw* /usr/lib/x86_64-linux-gnu/libnuma* /usr/lib/x86_64-linux-gnu/libltdl*`
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh:30:mpi_list=`ls -ltd $(find /usr/lib/openmpi*) | awk '{ print $9}'`
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh:31:# icon_list=`ls -ltd $(find /usr/share/icons/[a-j]*) | awk '{ print $9}'`
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh:32:# icon_list2=`ls -ltd $(find /usr/share/icons/[k-z]*) | awk '{ print $9}'`
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh:33:# mime_list=`ls -ltd $(find /usr/share/mime) | awk '{ print $9}'`
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh:34:# theme_list=`ls -ltd $(find /usr/share/themes) | awk '{ print $9}'`
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh-35-echo "
##############################################
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh-51- then
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh:52: second_name=`echo $i | sed 's/\///'`
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh-53- echo " $i : $second_name" >> snapcraft.yaml
##############################################
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh-57-do
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh:58: second_name=`echo $i | sed 's/\///'`
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh-59- echo " $i : $second_name" >> snapcraft.yaml
##############################################
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh-64- then
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh:65: second_name=`echo $i | sed 's/\///'`
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh-66- echo " $i : $second_name" >> snapcraft.yaml
##############################################
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh-72- then
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh:73: second_name=`echo $i | sed 's/\///'`
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh-74- echo " $i : $second_name" >> snapcraft.yaml
##############################################
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh-80- then
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh:81: second_name=`echo $i | sed 's/\///'`
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh-82- echo " $i : $second_name" >> snapcraft.yaml
##############################################
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh-88- then
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh:89: second_name=`echo $i | sed 's/\///'`
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh-90- echo " $i : $second_name" >> snapcraft.yaml
##############################################
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh-96- then
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh:97: second_name=`echo $i | sed 's/\///'`
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh-98- echo " $i : $second_name" >> snapcraft.yaml
##############################################
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh-112-do
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh:113: second_name=`echo $i | sed 's/\///'`
freecad-0.18.4+dfsg2/vagrant/generate_yaml.sh-114- echo " - $second_name" >> snapcraft.yaml
##############################################
freecad-0.18.4+dfsg2/.pc/set_about_freecad.patch/CMakeLists.txt-823-
freecad-0.18.4+dfsg2/.pc/set_about_freecad.patch/CMakeLists.txt:824: include(${QT_USE_FILE})
freecad-0.18.4+dfsg2/.pc/set_about_freecad.patch/CMakeLists.txt-825-
##############################################
freecad-0.18.4+dfsg2/.pc/do_not_install_binary_examples.patch/CMakeLists.txt-823-
freecad-0.18.4+dfsg2/.pc/do_not_install_binary_examples.patch/CMakeLists.txt:824: include(${QT_USE_FILE})
freecad-0.18.4+dfsg2/.pc/do_not_install_binary_examples.patch/CMakeLists.txt-825-
##############################################
freecad-0.18.4+dfsg2/CMakeLists.txt-823-
freecad-0.18.4+dfsg2/CMakeLists.txt:824: include(${QT_USE_FILE})
freecad-0.18.4+dfsg2/CMakeLists.txt-825-