=========================================================== .___ __ __ _________________ __ __ __| _/|__|/ |_ / ___\_` __ \__ \ | | \/ __ | | \\_ __\ / /_/ > | \// __ \| | / /_/ | | || | \___ /|__| (____ /____/\____ | |__||__| /_____/ \/ \/ grep rough audit - static analysis tool v2.8 written by @Wireghoul =================================[justanotherhacker.com]=== hexcurse-1.58/INSTALL-173-directory configuration variables that were expressed in terms of hexcurse-1.58/INSTALL:174:`${prefix}'. Any directories that were specified during `configure', hexcurse-1.58/INSTALL-175-but not in terms of `${prefix}', must each be overridden at install ############################################## hexcurse-1.58/Makefile.in-84- while test -n "$$dir1"; do \ hexcurse-1.58/Makefile.in:85: first=`echo "$$dir1" | sed -e "$$sed_first"`; \ hexcurse-1.58/Makefile.in-86- if test "$$first" != "."; then \ hexcurse-1.58/Makefile.in-87- if test "$$first" = ".."; then \ hexcurse-1.58/Makefile.in:88: dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ hexcurse-1.58/Makefile.in:89: dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ hexcurse-1.58/Makefile.in-90- else \ hexcurse-1.58/Makefile.in:91: first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ hexcurse-1.58/Makefile.in-92- if test "$$first2" = "$$first"; then \ hexcurse-1.58/Makefile.in:93: dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ hexcurse-1.58/Makefile.in-94- else \ ############################################## hexcurse-1.58/Makefile.in-99- fi; \ hexcurse-1.58/Makefile.in:100: dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ hexcurse-1.58/Makefile.in-101- done; \ ############################################## hexcurse-1.58/Makefile.in-273- dot_seen=no; \ hexcurse-1.58/Makefile.in:274: target=`echo $@ | sed s/-recursive//`; \ hexcurse-1.58/Makefile.in-275- list='$(SUBDIRS)'; for subdir in $$list; do \ ############################################## hexcurse-1.58/Makefile.in-308- rev="$$rev ."; \ hexcurse-1.58/Makefile.in:309: target=`echo $@ | sed s/-recursive//`; \ hexcurse-1.58/Makefile.in-310- for subdir in $$rev; do \ ############################################## hexcurse-1.58/Makefile.in-386-GTAGS: hexcurse-1.58/Makefile.in:387: here=`$(am__cd) $(top_builddir) && pwd` \ hexcurse-1.58/Makefile.in-388- && $(am__cd) $(top_srcdir) \ ############################################## hexcurse-1.58/Makefile.in-396- test -d "$(distdir)" || mkdir "$(distdir)" hexcurse-1.58/Makefile.in:397: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ hexcurse-1.58/Makefile.in:398: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ hexcurse-1.58/Makefile.in-399- list='$(DISTFILES)'; \ ############################################## hexcurse-1.58/Makefile.in-410- if test -d $$d/$$file; then \ hexcurse-1.58/Makefile.in:411: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ hexcurse-1.58/Makefile.in-412- if test -d "$(distdir)/$$file"; then \ ############################################## hexcurse-1.58/Makefile.in-524- test -d $(distdir)/_build || exit 0; \ hexcurse-1.58/Makefile.in:525: dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ hexcurse-1.58/Makefile.in-526- && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ ############################################## hexcurse-1.58/Makefile.in-567- }; \ hexcurse-1.58/Makefile.in:568: test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ hexcurse-1.58/Makefile.in-569- || { echo "ERROR: files left after uninstall:" ; \ ############################################## hexcurse-1.58/Makefile.in-579- fi hexcurse-1.58/Makefile.in:580: @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ hexcurse-1.58/Makefile.in-581- || { echo "ERROR: files left in build directory after distclean:" ; \ ############################################## hexcurse-1.58/aclocal.m4-73-# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to hexcurse-1.58/aclocal.m4:74:# `$srcdir', `$srcdir/..', or `$srcdir/../..'. hexcurse-1.58/aclocal.m4-75-# ############################################## hexcurse-1.58/aclocal.m4-97-# iff we strip the leading $srcdir from $ac_aux_dir. That would be: hexcurse-1.58/aclocal.m4:98:# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` hexcurse-1.58/aclocal.m4-99-# and then we would define $MISSING as ############################################## hexcurse-1.58/aclocal.m4-113-# expand $ac_aux_dir to an absolute path hexcurse-1.58/aclocal.m4:114:am_aux_dir=`cd $ac_aux_dir && pwd` hexcurse-1.58/aclocal.m4-115-]) ############################################## hexcurse-1.58/aclocal.m4-215- if test "$am_compiler_list" = ""; then hexcurse-1.58/aclocal.m4:216: am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` hexcurse-1.58/aclocal.m4-217- fi ############################################## hexcurse-1.58/aclocal.m4-364- # Strip MF so we end up with the name of the file. hexcurse-1.58/aclocal.m4:365: mf=`echo "$mf" | sed -e 's/:.*$//'` hexcurse-1.58/aclocal.m4-366- # Check whether this is an Automake generated Makefile or not. ############################################## hexcurse-1.58/aclocal.m4-373- if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then hexcurse-1.58/aclocal.m4:374: dirpart=`AS_DIRNAME("$mf")` hexcurse-1.58/aclocal.m4-375- else ############################################## hexcurse-1.58/aclocal.m4-379- # from the Makefile without running `make'. hexcurse-1.58/aclocal.m4:380: DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` hexcurse-1.58/aclocal.m4-381- test -z "$DEPDIR" && continue hexcurse-1.58/aclocal.m4:382: am__include=`sed -n 's/^am__include = //p' < "$mf"` hexcurse-1.58/aclocal.m4-383- test -z "am__include" && continue hexcurse-1.58/aclocal.m4:384: am__quote=`sed -n 's/^am__quote = //p' < "$mf"` hexcurse-1.58/aclocal.m4-385- # When using ansi2knr, U may be empty or an underscore; expand it hexcurse-1.58/aclocal.m4:386: U=`sed -n 's/^U = //p' < "$mf"` hexcurse-1.58/aclocal.m4-387- # Find all dependency output files, they are included files with ############################################## hexcurse-1.58/aclocal.m4-395- test -f "$dirpart/$file" && continue hexcurse-1.58/aclocal.m4:396: fdir=`AS_DIRNAME(["$file"])` hexcurse-1.58/aclocal.m4-397- AS_MKDIR_P([$dirpart/$fdir]) ############################################## hexcurse-1.58/aclocal.m4-450-AC_REQUIRE([AC_PROG_INSTALL])dnl hexcurse-1.58/aclocal.m4:451:if test "`cd $srcdir && pwd`" != "`pwd`"; then hexcurse-1.58/aclocal.m4-452- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output ############################################## hexcurse-1.58/aclocal.m4-552- * ) hexcurse-1.58/aclocal.m4:553: _am_stamp_count=`expr $_am_stamp_count + 1` ;; hexcurse-1.58/aclocal.m4-554- esac hexcurse-1.58/aclocal.m4-555-done hexcurse-1.58/aclocal.m4:556:echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) hexcurse-1.58/aclocal.m4-557- ############################################## hexcurse-1.58/aclocal.m4-630-# Ignore all kinds of additional output from `make'. hexcurse-1.58/aclocal.m4:631:case `$am_make -s -f confmf 2> /dev/null` in #( hexcurse-1.58/aclocal.m4-632-*the\ am__doit\ target*) ############################################## hexcurse-1.58/aclocal.m4-640- echo '.include "confinc"' > confmf hexcurse-1.58/aclocal.m4:641: case `$am_make -s -f confmf 2> /dev/null` in #( hexcurse-1.58/aclocal.m4-642- *the\ am__doit\ target*) ############################################## hexcurse-1.58/aclocal.m4-797-if ( hexcurse-1.58/aclocal.m4:798: set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` hexcurse-1.58/aclocal.m4-799- if test "$[*]" = "X"; then hexcurse-1.58/aclocal.m4-800- # -L didn't work. hexcurse-1.58/aclocal.m4:801: set X `ls -t "$srcdir/configure" conftest.file` hexcurse-1.58/aclocal.m4-802- fi ############################################## hexcurse-1.58/config.guess-38- hexcurse-1.58/config.guess:39:me=`echo "$0" | sed -e 's,.*/,,'` hexcurse-1.58/config.guess-40- ############################################## hexcurse-1.58/config.guess-108-: ${TMPDIR=/tmp} ; hexcurse-1.58/config.guess:109: { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || hexcurse-1.58/config.guess-110- { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || ############################################## hexcurse-1.58/config.guess-194- *) hexcurse-1.58/config.guess:195: release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` hexcurse-1.58/config.guess-196- ;; ############################################## hexcurse-1.58/config.guess-221- *4.0) hexcurse-1.58/config.guess:222: UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` hexcurse-1.58/config.guess-223- ;; hexcurse-1.58/config.guess-224- *5.*) hexcurse-1.58/config.guess:225: UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` hexcurse-1.58/config.guess-226- ;; ############################################## hexcurse-1.58/config.guess-231- # types through head -n 1, so we only detect the type of CPU 0. hexcurse-1.58/config.guess:232: ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` hexcurse-1.58/config.guess-233- case "$ALPHA_CPU_TYPE" in ############################################## hexcurse-1.58/config.guess-269- # 1.2 uses "1.2" for uname -r. hexcurse-1.58/config.guess:270: echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` hexcurse-1.58/config.guess-271- # Reset EXIT trap before exiting to avoid spurious non-zero exit code. ############################################## hexcurse-1.58/config.guess-329- s390x:SunOS:*:*) hexcurse-1.58/config.guess:330: echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` hexcurse-1.58/config.guess-331- exit ;; hexcurse-1.58/config.guess-332- sun4H:SunOS:5.*:*) hexcurse-1.58/config.guess:333: echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` hexcurse-1.58/config.guess-334- exit ;; hexcurse-1.58/config.guess-335- sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) hexcurse-1.58/config.guess:336: echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` hexcurse-1.58/config.guess-337- exit ;; ############################################## hexcurse-1.58/config.guess-354- fi hexcurse-1.58/config.guess:355: echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` hexcurse-1.58/config.guess-356- exit ;; ############################################## hexcurse-1.58/config.guess-360- # it's likely to be more like Solaris than SunOS4. hexcurse-1.58/config.guess:361: echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` hexcurse-1.58/config.guess-362- exit ;; ############################################## hexcurse-1.58/config.guess-369- # Japanese Language versions have a version number like `4.1.3-JL'. hexcurse-1.58/config.guess:370: echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` hexcurse-1.58/config.guess-371- exit ;; ############################################## hexcurse-1.58/config.guess-375- sun*:*:4.2BSD:*) hexcurse-1.58/config.guess:376: UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` hexcurse-1.58/config.guess-377- test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 ############################################## hexcurse-1.58/config.guess-457- $CC_FOR_BUILD -o $dummy $dummy.c && hexcurse-1.58/config.guess:458: dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && hexcurse-1.58/config.guess:459: SYSTEM_NAME=`$dummy $dummyarg` && hexcurse-1.58/config.guess-460- { echo "$SYSTEM_NAME"; exit; } ############################################## hexcurse-1.58/config.guess-513- *:IRIX*:*:*) hexcurse-1.58/config.guess:514: echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` hexcurse-1.58/config.guess-515- exit ;; ############################################## hexcurse-1.58/config.guess-543-EOF hexcurse-1.58/config.guess:544: if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` hexcurse-1.58/config.guess-545- then ############################################## hexcurse-1.58/config.guess-556- *:AIX:*:[4567]) hexcurse-1.58/config.guess:557: IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` hexcurse-1.58/config.guess-558- if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then ############################################## hexcurse-1.58/config.guess-591- 9000/[34678]??:HP-UX:*:*) hexcurse-1.58/config.guess:592: HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` hexcurse-1.58/config.guess-593- case "${UNAME_MACHINE}" in ############################################## hexcurse-1.58/config.guess-645-EOF hexcurse-1.58/config.guess:646: (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` hexcurse-1.58/config.guess-647- test -z "$HP_ARCH" && HP_ARCH=hppa ############################################## hexcurse-1.58/config.guess-673- ia64:HP-UX:*:*) hexcurse-1.58/config.guess:674: HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` hexcurse-1.58/config.guess-675- echo ia64-hp-hpux${HPUX_REV} ############################################## hexcurse-1.58/config.guess-703-EOF hexcurse-1.58/config.guess:704: $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && hexcurse-1.58/config.guess-705- { echo "$SYSTEM_NAME"; exit; } ############################################## hexcurse-1.58/config.guess-774- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` hexcurse-1.58/config.guess:775: FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` hexcurse-1.58/config.guess-776- echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" ############################################## hexcurse-1.58/config.guess-779- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` hexcurse-1.58/config.guess:780: FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` hexcurse-1.58/config.guess-781- echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" ############################################## hexcurse-1.58/config.guess-795- amd64) hexcurse-1.58/config.guess:796: echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; hexcurse-1.58/config.guess-797- *) hexcurse-1.58/config.guess:798: echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; hexcurse-1.58/config.guess-799- esac ############################################## hexcurse-1.58/config.guess-850- prep*:SunOS:5.*:*) hexcurse-1.58/config.guess:851: echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` hexcurse-1.58/config.guess-852- exit ;; ############################################## hexcurse-1.58/config.guess-854- # the GNU system hexcurse-1.58/config.guess:855: echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` hexcurse-1.58/config.guess-856- exit ;; ############################################## hexcurse-1.58/config.guess-858- # other systems with GNU libc and userland hexcurse-1.58/config.guess:859: echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu hexcurse-1.58/config.guess-860- exit ;; ############################################## hexcurse-1.58/config.guess-923-EOF hexcurse-1.58/config.guess:924: eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'` hexcurse-1.58/config.guess-925- echo "${UNAME_MACHINE}-pc-linux-${LIBC}" ############################################## hexcurse-1.58/config.guess-951-EOF hexcurse-1.58/config.guess:952: eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'` hexcurse-1.58/config.guess-953- test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } ############################################## hexcurse-1.58/config.guess-1036- i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) hexcurse-1.58/config.guess:1037: UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` hexcurse-1.58/config.guess-1038- if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then ############################################## hexcurse-1.58/config.guess-1306- *:DragonFly:*:*) hexcurse-1.58/config.guess:1307: echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` hexcurse-1.58/config.guess-1308- exit ;; ############################################## hexcurse-1.58/config.guess-1319- i*86:skyos:*:*) hexcurse-1.58/config.guess:1320: echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' hexcurse-1.58/config.guess-1321- exit ;; ############################################## hexcurse-1.58/config.guess-1450- hexcurse-1.58/config.guess:1451:$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && hexcurse-1.58/config.guess-1452- { echo "$SYSTEM_NAME"; exit; } ############################################## hexcurse-1.58/config.sub-57- hexcurse-1.58/config.sub:58:me=`echo "$0" | sed -e 's,.*/,,'` hexcurse-1.58/config.sub-59- ############################################## hexcurse-1.58/config.sub-122-# Here we must recognize all the valid KERNEL-OS combinations. hexcurse-1.58/config.sub:123:maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` hexcurse-1.58/config.sub-124-case $maybe_os in ############################################## hexcurse-1.58/config.sub-130- os=-$maybe_os hexcurse-1.58/config.sub:131: basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` hexcurse-1.58/config.sub-132- ;; ############################################## hexcurse-1.58/config.sub-134- os=-linux-android hexcurse-1.58/config.sub:135: basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown hexcurse-1.58/config.sub-136- ;; hexcurse-1.58/config.sub-137- *) hexcurse-1.58/config.sub:138: basic_machine=`echo $1 | sed 's/-[^-]*$//'` hexcurse-1.58/config.sub-139- if [ $basic_machine != $1 ] hexcurse-1.58/config.sub:140: then os=`echo $1 | sed 's/.*-/-/'` hexcurse-1.58/config.sub-141- else os=; fi ############################################## hexcurse-1.58/config.sub-188- os=-sco5v6 hexcurse-1.58/config.sub:189: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` hexcurse-1.58/config.sub-190- ;; ############################################## hexcurse-1.58/config.sub-192- os=-sco3.2v5 hexcurse-1.58/config.sub:193: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` hexcurse-1.58/config.sub-194- ;; ############################################## hexcurse-1.58/config.sub-196- os=-sco3.2v4 hexcurse-1.58/config.sub:197: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` hexcurse-1.58/config.sub-198- ;; hexcurse-1.58/config.sub-199- -sco3.2.[4-9]*) hexcurse-1.58/config.sub:200: os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` hexcurse-1.58/config.sub:201: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` hexcurse-1.58/config.sub-202- ;; ############################################## hexcurse-1.58/config.sub-204- # Don't forget version if it is 3.2v4 or newer. hexcurse-1.58/config.sub:205: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` hexcurse-1.58/config.sub-206- ;; ############################################## hexcurse-1.58/config.sub-208- # Don't forget version if it is 3.2v4 or newer. hexcurse-1.58/config.sub:209: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` hexcurse-1.58/config.sub-210- ;; ############################################## hexcurse-1.58/config.sub-212- os=-sco3.2v2 hexcurse-1.58/config.sub:213: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` hexcurse-1.58/config.sub-214- ;; hexcurse-1.58/config.sub-215- -udk*) hexcurse-1.58/config.sub:216: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` hexcurse-1.58/config.sub-217- ;; ############################################## hexcurse-1.58/config.sub-219- os=-isc2.2 hexcurse-1.58/config.sub:220: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` hexcurse-1.58/config.sub-221- ;; ############################################## hexcurse-1.58/config.sub-225- -isc*) hexcurse-1.58/config.sub:226: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` hexcurse-1.58/config.sub-227- ;; ############################################## hexcurse-1.58/config.sub-231- -ptx*) hexcurse-1.58/config.sub:232: basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` hexcurse-1.58/config.sub-233- ;; hexcurse-1.58/config.sub-234- -windowsnt*) hexcurse-1.58/config.sub:235: os=`echo $os | sed -e 's/windowsnt/winnt/'` hexcurse-1.58/config.sub-236- ;; ############################################## hexcurse-1.58/config.sub-357- *-*-*) hexcurse-1.58/config.sub:358: echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 hexcurse-1.58/config.sub-359- exit 1 ############################################## hexcurse-1.58/config.sub-475- amd64-*) hexcurse-1.58/config.sub:476: basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` hexcurse-1.58/config.sub-477- ;; ############################################## hexcurse-1.58/config.sub-517- blackfin-*) hexcurse-1.58/config.sub:518: basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'` hexcurse-1.58/config.sub-519- os=-linux ############################################## hexcurse-1.58/config.sub-525- c54x-*) hexcurse-1.58/config.sub:526: basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'` hexcurse-1.58/config.sub-527- ;; hexcurse-1.58/config.sub-528- c55x-*) hexcurse-1.58/config.sub:529: basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'` hexcurse-1.58/config.sub-530- ;; hexcurse-1.58/config.sub-531- c6x-*) hexcurse-1.58/config.sub:532: basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'` hexcurse-1.58/config.sub-533- ;; ############################################## hexcurse-1.58/config.sub-728- i*86v32) hexcurse-1.58/config.sub:729: basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` hexcurse-1.58/config.sub-730- os=-sysv32 ############################################## hexcurse-1.58/config.sub-732- i*86v4*) hexcurse-1.58/config.sub:733: basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` hexcurse-1.58/config.sub-734- os=-sysv4 ############################################## hexcurse-1.58/config.sub-736- i*86v) hexcurse-1.58/config.sub:737: basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` hexcurse-1.58/config.sub-738- os=-sysv ############################################## hexcurse-1.58/config.sub-740- i*86sol2) hexcurse-1.58/config.sub:741: basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` hexcurse-1.58/config.sub-742- os=-solaris2 ############################################## hexcurse-1.58/config.sub-770- m68knommu-*) hexcurse-1.58/config.sub:771: basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'` hexcurse-1.58/config.sub-772- os=-linux ############################################## hexcurse-1.58/config.sub-803- mips3*-*) hexcurse-1.58/config.sub:804: basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` hexcurse-1.58/config.sub-805- ;; hexcurse-1.58/config.sub-806- mips3*) hexcurse-1.58/config.sub:807: basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown hexcurse-1.58/config.sub-808- ;; ############################################## hexcurse-1.58/config.sub-821- ms1-*) hexcurse-1.58/config.sub:822: basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` hexcurse-1.58/config.sub-823- ;; ############################################## hexcurse-1.58/config.sub-940- parisc-*) hexcurse-1.58/config.sub:941: basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'` hexcurse-1.58/config.sub-942- os=-linux ############################################## hexcurse-1.58/config.sub-956- pc98-*) hexcurse-1.58/config.sub:957: basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` hexcurse-1.58/config.sub-958- ;; ############################################## hexcurse-1.58/config.sub-971- pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) hexcurse-1.58/config.sub:972: basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` hexcurse-1.58/config.sub-973- ;; hexcurse-1.58/config.sub-974- pentiumpro-* | p6-* | 6x86-* | athlon-*) hexcurse-1.58/config.sub:975: basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` hexcurse-1.58/config.sub-976- ;; hexcurse-1.58/config.sub-977- pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) hexcurse-1.58/config.sub:978: basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` hexcurse-1.58/config.sub-979- ;; hexcurse-1.58/config.sub-980- pentium4-*) hexcurse-1.58/config.sub:981: basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` hexcurse-1.58/config.sub-982- ;; ############################################## hexcurse-1.58/config.sub-990- ppc-* | ppcbe-*) hexcurse-1.58/config.sub:991: basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` hexcurse-1.58/config.sub-992- ;; ############################################## hexcurse-1.58/config.sub-996- ppcle-* | powerpclittle-*) hexcurse-1.58/config.sub:997: basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` hexcurse-1.58/config.sub-998- ;; ############################################## hexcurse-1.58/config.sub-1000- ;; hexcurse-1.58/config.sub:1001: ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` hexcurse-1.58/config.sub-1002- ;; ############################################## hexcurse-1.58/config.sub-1006- ppc64le-* | powerpc64little-*) hexcurse-1.58/config.sub:1007: basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` hexcurse-1.58/config.sub-1008- ;; ############################################## hexcurse-1.58/config.sub-1085- strongarm-* | thumb-*) hexcurse-1.58/config.sub:1086: basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'` hexcurse-1.58/config.sub-1087- ;; ############################################## hexcurse-1.58/config.sub-1215- xscale-* | xscalee[bl]-*) hexcurse-1.58/config.sub:1216: basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'` hexcurse-1.58/config.sub-1217- ;; ############################################## hexcurse-1.58/config.sub-1292- *) hexcurse-1.58/config.sub:1293: echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 hexcurse-1.58/config.sub-1294- exit 1 ############################################## hexcurse-1.58/config.sub-1300- *-digital*) hexcurse-1.58/config.sub:1301: basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` hexcurse-1.58/config.sub-1302- ;; hexcurse-1.58/config.sub-1303- *-commodore*) hexcurse-1.58/config.sub:1304: basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` hexcurse-1.58/config.sub-1305- ;; ############################################## hexcurse-1.58/config.sub-1321- -solaris1 | -solaris1.*) hexcurse-1.58/config.sub:1322: os=`echo $os | sed -e 's|solaris1|sunos4|'` hexcurse-1.58/config.sub-1323- ;; ############################################## hexcurse-1.58/config.sub-1333- -gnu/linux*) hexcurse-1.58/config.sub:1334: os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` hexcurse-1.58/config.sub-1335- ;; ############################################## hexcurse-1.58/config.sub-1379- -nto*) hexcurse-1.58/config.sub:1380: os=`echo $os | sed -e 's|nto|nto-qnx|'` hexcurse-1.58/config.sub-1381- ;; ############################################## hexcurse-1.58/config.sub-1386- -mac*) hexcurse-1.58/config.sub:1387: os=`echo $os | sed -e 's|mac|macos|'` hexcurse-1.58/config.sub-1388- ;; ############################################## hexcurse-1.58/config.sub-1392- -linux*) hexcurse-1.58/config.sub:1393: os=`echo $os | sed -e 's|linux|linux-gnu|'` hexcurse-1.58/config.sub-1394- ;; hexcurse-1.58/config.sub-1395- -sunos5*) hexcurse-1.58/config.sub:1396: os=`echo $os | sed -e 's|sunos5|solaris2|'` hexcurse-1.58/config.sub-1397- ;; hexcurse-1.58/config.sub-1398- -sunos6*) hexcurse-1.58/config.sub:1399: os=`echo $os | sed -e 's|sunos6|solaris3|'` hexcurse-1.58/config.sub-1400- ;; ############################################## hexcurse-1.58/config.sub-1447- -sinix5.*) hexcurse-1.58/config.sub:1448: os=`echo $os | sed -e 's|sinix|sysv|'` hexcurse-1.58/config.sub-1449- ;; ############################################## hexcurse-1.58/config.sub-1503- # Get rid of the `-' at the beginning of $os. hexcurse-1.58/config.sub:1504: os=`echo $os | sed 's/[^-]*-//'` hexcurse-1.58/config.sub:1505: echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 hexcurse-1.58/config.sub-1506- exit 1 ############################################## hexcurse-1.58/config.sub-1760- esac hexcurse-1.58/config.sub:1761: basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` hexcurse-1.58/config.sub-1762- ;; ############################################## hexcurse-1.58/configure-43-if test -z "$BASH_VERSION$ZSH_VERSION" \ hexcurse-1.58/configure:44: && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then hexcurse-1.58/configure-45- as_echo='print -r --' hexcurse-1.58/configure-46- as_echo_n='print -rn --' hexcurse-1.58/configure:47:elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then hexcurse-1.58/configure-48- as_echo='printf %s\n' ############################################## hexcurse-1.58/configure-50-else hexcurse-1.58/configure:51: if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then hexcurse-1.58/configure-52- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' ############################################## hexcurse-1.58/configure-60- expr "X$arg" : "X\\(.*\\)$as_nl"; hexcurse-1.58/configure:61: arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; hexcurse-1.58/configure-62- esac; ############################################## hexcurse-1.58/configure-197- eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && hexcurse-1.58/configure:198: test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 hexcurse-1.58/configure-199-test \$(( 1 + 1 )) = 2 || exit 1" ############################################## hexcurse-1.58/configure-324- case $as_dir in #( hexcurse-1.58/configure:325: *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( hexcurse-1.58/configure-326- *) as_qdir=$as_dir;; ############################################## hexcurse-1.58/configure-397- { hexcurse-1.58/configure:398: as_val=`expr "$@" || test $? -eq 1` hexcurse-1.58/configure-399- } ############################################## hexcurse-1.58/configure-404-# ---------------------------------------- hexcurse-1.58/configure:405:# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are hexcurse-1.58/configure-406-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the ############################################## hexcurse-1.58/configure-467- eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && hexcurse-1.58/configure:468: test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { hexcurse-1.58/configure-469- # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) ############################################## hexcurse-1.58/configure-791- case $ac_option in hexcurse-1.58/configure:792: *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; hexcurse-1.58/configure-793- *=) ac_optarg= ;; ############################################## hexcurse-1.58/configure-835- -disable-* | --disable-*) hexcurse-1.58/configure:836: ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` hexcurse-1.58/configure-837- # Reject names that are not valid shell variable names. ############################################## hexcurse-1.58/configure-840- ac_useropt_orig=$ac_useropt hexcurse-1.58/configure:841: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` hexcurse-1.58/configure-842- case $ac_user_opts in ############################################## hexcurse-1.58/configure-861- -enable-* | --enable-*) hexcurse-1.58/configure:862: ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` hexcurse-1.58/configure-863- # Reject names that are not valid shell variable names. ############################################## hexcurse-1.58/configure-866- ac_useropt_orig=$ac_useropt hexcurse-1.58/configure:867: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` hexcurse-1.58/configure-868- case $ac_user_opts in ############################################## hexcurse-1.58/configure-1065- -with-* | --with-*) hexcurse-1.58/configure:1066: ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` hexcurse-1.58/configure-1067- # Reject names that are not valid shell variable names. ############################################## hexcurse-1.58/configure-1070- ac_useropt_orig=$ac_useropt hexcurse-1.58/configure:1071: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` hexcurse-1.58/configure-1072- case $ac_user_opts in ############################################## hexcurse-1.58/configure-1081- -without-* | --without-*) hexcurse-1.58/configure:1082: ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` hexcurse-1.58/configure-1083- # Reject names that are not valid shell variable names. ############################################## hexcurse-1.58/configure-1086- ac_useropt_orig=$ac_useropt hexcurse-1.58/configure:1087: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` hexcurse-1.58/configure-1088- case $ac_user_opts in ############################################## hexcurse-1.58/configure-1119- *=*) hexcurse-1.58/configure:1120: ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` hexcurse-1.58/configure-1121- # Reject names that are not valid shell variable names. ############################################## hexcurse-1.58/configure-1140-if test -n "$ac_prev"; then hexcurse-1.58/configure:1141: ac_option=--`echo $ac_prev | sed 's/_/-/g'` hexcurse-1.58/configure-1142- as_fn_error $? "missing argument to $ac_option" ############################################## hexcurse-1.58/configure-1162- */ ) hexcurse-1.58/configure:1163: ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` hexcurse-1.58/configure-1164- eval $ac_var=\$ac_val;; ############################################## hexcurse-1.58/configure-1197-ac_ls_di=`ls -di .` && hexcurse-1.58/configure:1198:ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || hexcurse-1.58/configure-1199- as_fn_error $? "working directory cannot be determined" ############################################## hexcurse-1.58/configure-1253-case $srcdir in hexcurse-1.58/configure:1254:*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; hexcurse-1.58/configure-1255-esac ############################################## hexcurse-1.58/configure-1296-By default, \`make install' will install all the files in hexcurse-1.58/configure:1297:\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify hexcurse-1.58/configure:1298:an installation prefix other than \`$ac_default_prefix' using \`--prefix', hexcurse-1.58/configure-1299-for instance \`--prefix=\$HOME'. ############################################## hexcurse-1.58/configure-1380-*) hexcurse-1.58/configure:1381: ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` hexcurse-1.58/configure-1382- # A ".." for each directory in $ac_dir_suffix. hexcurse-1.58/configure:1383: ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` hexcurse-1.58/configure-1384- case $ac_top_builddir_sub in ############################################## hexcurse-1.58/configure-1851- *\'*) hexcurse-1.58/configure:1852: ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; hexcurse-1.58/configure-1853- esac ############################################## hexcurse-1.58/configure-1934- case $ac_val in hexcurse-1.58/configure:1935: *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; hexcurse-1.58/configure-1936- esac ############################################## hexcurse-1.58/configure-1949- case $ac_val in hexcurse-1.58/configure:1950: *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; hexcurse-1.58/configure-1951- esac ############################################## hexcurse-1.58/configure-2069- set,) hexcurse-1.58/configure:2070: { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 hexcurse-1.58/configure:2071:$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} hexcurse-1.58/configure-2072- ac_cache_corrupted=: ;; ############################################## hexcurse-1.58/configure-2080- # differences in whitespace do not lead to failure. hexcurse-1.58/configure:2081: ac_old_val_w=`echo x $ac_old_val` hexcurse-1.58/configure:2082: ac_new_val_w=`echo x $ac_new_val` hexcurse-1.58/configure-2083- if test "$ac_old_val_w" != "$ac_new_val_w"; then ############################################## hexcurse-1.58/configure-2100- case $ac_new_val in hexcurse-1.58/configure:2101: *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; hexcurse-1.58/configure-2102- *) ac_arg=$ac_var=$ac_new_val ;; ############################################## hexcurse-1.58/configure-2276-if ( hexcurse-1.58/configure:2277: set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` hexcurse-1.58/configure-2278- if test "$*" = "X"; then hexcurse-1.58/configure-2279- # -L didn't work. hexcurse-1.58/configure:2280: set X `ls -t "$srcdir/configure" conftest.file` hexcurse-1.58/configure-2281- fi ############################################## hexcurse-1.58/configure-2312-ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' hexcurse-1.58/configure:2313:program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` hexcurse-1.58/configure-2314- hexcurse-1.58/configure-2315-# expand $ac_aux_dir to an absolute path hexcurse-1.58/configure:2316:am_aux_dir=`cd $ac_aux_dir && pwd` hexcurse-1.58/configure-2317- ############################################## hexcurse-1.58/configure-2457- as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue hexcurse-1.58/configure:2458: case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( hexcurse-1.58/configure-2459- 'mkdir (GNU coreutils) '* | \ ############################################## hexcurse-1.58/configure-2536-set x ${MAKE-make} hexcurse-1.58/configure:2537:ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` hexcurse-1.58/configure-2538-if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : ############################################## hexcurse-1.58/configure-2546-# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. hexcurse-1.58/configure:2547:case `${MAKE-make} -f conftest.make 2>/dev/null` in hexcurse-1.58/configure-2548- *@@@%%%=?*=@@@%%%*) ############################################## hexcurse-1.58/configure-2573- hexcurse-1.58/configure:2574:if test "`cd $srcdir && pwd`" != "`pwd`"; then hexcurse-1.58/configure-2575- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output ############################################## hexcurse-1.58/configure-2650-test "x$ac_build_alias" = x && hexcurse-1.58/configure:2651: ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` hexcurse-1.58/configure-2652-test "x$ac_build_alias" = x && hexcurse-1.58/configure-2653- as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 hexcurse-1.58/configure:2654:ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || hexcurse-1.58/configure-2655- as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 ############################################## hexcurse-1.58/configure-2674-IFS=$ac_save_IFS hexcurse-1.58/configure:2675:case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac hexcurse-1.58/configure-2676- ############################################## hexcurse-1.58/configure-2685-else hexcurse-1.58/configure:2686: ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || hexcurse-1.58/configure-2687- as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 ############################################## hexcurse-1.58/configure-2707-IFS=$ac_save_IFS hexcurse-1.58/configure:2708:case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac hexcurse-1.58/configure-2709- ############################################## hexcurse-1.58/configure-3057-$as_echo_n "checking whether the C compiler works... " >&6; } hexcurse-1.58/configure:3058:ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` hexcurse-1.58/configure-3059- ############################################## hexcurse-1.58/configure-3101- then :; else hexcurse-1.58/configure:3102: ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` hexcurse-1.58/configure-3103- fi ############################################## hexcurse-1.58/configure-3161- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; hexcurse-1.58/configure:3162: *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` hexcurse-1.58/configure-3163- break;; ############################################## hexcurse-1.58/configure-3270- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; hexcurse-1.58/configure:3271: *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` hexcurse-1.58/configure-3272- break;; ############################################## hexcurse-1.58/configure-3519-# Ignore all kinds of additional output from `make'. hexcurse-1.58/configure:3520:case `$am_make -s -f confmf 2> /dev/null` in #( hexcurse-1.58/configure-3521-*the\ am__doit\ target*) ############################################## hexcurse-1.58/configure-3529- echo '.include "confinc"' > confmf hexcurse-1.58/configure:3530: case `$am_make -s -f confmf 2> /dev/null` in #( hexcurse-1.58/configure-3531- *the\ am__doit\ target*) ############################################## hexcurse-1.58/configure-3592- if test "$am_compiler_list" = ""; then hexcurse-1.58/configure:3593: am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` hexcurse-1.58/configure-3594- fi ############################################## hexcurse-1.58/configure-4122- # Check for GNU $ac_path_GREP hexcurse-1.58/configure:4123:case `"$ac_path_GREP" --version 2>&1` in hexcurse-1.58/configure-4124-*GNU*) ############################################## hexcurse-1.58/configure-4188- # Check for GNU $ac_path_EGREP hexcurse-1.58/configure:4189:case `"$ac_path_EGREP" --version 2>&1` in hexcurse-1.58/configure-4190-*GNU*) ############################################## hexcurse-1.58/configure-4349-do : hexcurse-1.58/configure:4350: as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` hexcurse-1.58/configure-4351-ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default ############################################## hexcurse-1.58/configure-4354- cat >>confdefs.h <<_ACEOF hexcurse-1.58/configure:4355:#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 hexcurse-1.58/configure-4356-_ACEOF ############################################## hexcurse-1.58/configure-4951- ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' hexcurse-1.58/configure:4952: ac_i=`$as_echo "$ac_i" | sed "$ac_script"` hexcurse-1.58/configure-4953- # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR ############################################## hexcurse-1.58/configure-5034-if test -z "$BASH_VERSION$ZSH_VERSION" \ hexcurse-1.58/configure:5035: && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then hexcurse-1.58/configure-5036- as_echo='print -r --' hexcurse-1.58/configure-5037- as_echo_n='print -rn --' hexcurse-1.58/configure:5038:elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then hexcurse-1.58/configure-5039- as_echo='printf %s\n' ############################################## hexcurse-1.58/configure-5041-else hexcurse-1.58/configure:5042: if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then hexcurse-1.58/configure-5043- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' ############################################## hexcurse-1.58/configure-5051- expr "X$arg" : "X\\(.*\\)$as_nl"; hexcurse-1.58/configure:5052: arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; hexcurse-1.58/configure-5053- esac; ############################################## hexcurse-1.58/configure-5128-# ---------------------------------------- hexcurse-1.58/configure:5129:# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are hexcurse-1.58/configure-5130-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the ############################################## hexcurse-1.58/configure-5200- { hexcurse-1.58/configure:5201: as_val=`expr "$@" || test $? -eq 1` hexcurse-1.58/configure-5202- } ############################################## hexcurse-1.58/configure-5304- case $as_dir in #( hexcurse-1.58/configure:5305: *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( hexcurse-1.58/configure-5306- *) as_qdir=$as_dir;; ############################################## hexcurse-1.58/configure-5439-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 hexcurse-1.58/configure:5440:ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" hexcurse-1.58/configure-5441-ac_cs_version="\\ ############################################## hexcurse-1.58/configure-5464- --*=?*) hexcurse-1.58/configure:5465: ac_option=`expr "X$1" : 'X\([^=]*\)='` hexcurse-1.58/configure:5466: ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` hexcurse-1.58/configure-5467- ac_shift=: ############################################## hexcurse-1.58/configure-5469- --*=) hexcurse-1.58/configure:5470: ac_option=`expr "X$1" : 'X\([^=]*\)='` hexcurse-1.58/configure-5471- ac_optarg= ############################################## hexcurse-1.58/configure-5493- case $ac_optarg in hexcurse-1.58/configure:5494: *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; hexcurse-1.58/configure-5495- '') as_fn_error $? "missing file argument" ;; ############################################## hexcurse-1.58/configure-5501- case $ac_optarg in hexcurse-1.58/configure:5502: *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; hexcurse-1.58/configure-5503- esac ############################################## hexcurse-1.58/configure-5631-fi hexcurse-1.58/configure:5632:ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null` hexcurse-1.58/configure-5633-if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then ############################################## hexcurse-1.58/configure-5648- as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 hexcurse-1.58/configure:5649:ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` hexcurse-1.58/configure-5650-ac_delim='%!_!# ' ############################################## hexcurse-1.58/configure-5654- hexcurse-1.58/configure:5655: ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` hexcurse-1.58/configure-5656- if test $ac_delim_n = $ac_delim_num; then ############################################## hexcurse-1.58/configure-5792-for ac_last_try in false false :; do hexcurse-1.58/configure:5793: ac_tt=`sed -n "/$ac_delim/p" confdefs.h` hexcurse-1.58/configure-5794- if test -z "$ac_tt"; then ############################################## hexcurse-1.58/configure-5924- esac hexcurse-1.58/configure:5925: case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac hexcurse-1.58/configure-5926- as_fn_append ac_file_inputs " '$ac_f'" ############################################## hexcurse-1.58/configure-5983-*) hexcurse-1.58/configure:5984: ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` hexcurse-1.58/configure-5985- # A ".." for each directory in $ac_dir_suffix. hexcurse-1.58/configure:5986: ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` hexcurse-1.58/configure-5987- case $ac_top_builddir_sub in ############################################## hexcurse-1.58/configure-6044-/@mandir@/p' hexcurse-1.58/configure:6045:case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in hexcurse-1.58/configure-6046-*datarootdir*) ac_datarootdir_seen=yes;; ############################################## hexcurse-1.58/configure-6061- hexcurse-1.58/configure:6062:# Neutralize VPATH when `$srcdir' = `.'. hexcurse-1.58/configure-6063-# Shell code in configure.ac might set extrasub. ############################################## hexcurse-1.58/configure-6089-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && hexcurse-1.58/configure:6090: { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && hexcurse-1.58/configure-6091- { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ ############################################## hexcurse-1.58/configure-6135- * ) hexcurse-1.58/configure:6136: _am_stamp_count=`expr $_am_stamp_count + 1` ;; hexcurse-1.58/configure-6137- esac ############################################## hexcurse-1.58/configure-6182- # Strip MF so we end up with the name of the file. hexcurse-1.58/configure:6183: mf=`echo "$mf" | sed -e 's/:.*$//'` hexcurse-1.58/configure-6184- # Check whether this is an Automake generated Makefile or not. ############################################## hexcurse-1.58/configure-6219- # from the Makefile without running `make'. hexcurse-1.58/configure:6220: DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` hexcurse-1.58/configure-6221- test -z "$DEPDIR" && continue hexcurse-1.58/configure:6222: am__include=`sed -n 's/^am__include = //p' < "$mf"` hexcurse-1.58/configure-6223- test -z "am__include" && continue hexcurse-1.58/configure:6224: am__quote=`sed -n 's/^am__quote = //p' < "$mf"` hexcurse-1.58/configure-6225- # When using ansi2knr, U may be empty or an underscore; expand it hexcurse-1.58/configure:6226: U=`sed -n 's/^U = //p' < "$mf"` hexcurse-1.58/configure-6227- # Find all dependency output files, they are included files with ############################################## hexcurse-1.58/depcomp-67- sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} hexcurse-1.58/depcomp:68:tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} hexcurse-1.58/depcomp-69- ############################################## hexcurse-1.58/depcomp-234- # Version 6 uses the directory in both cases. hexcurse-1.58/depcomp:235: dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` hexcurse-1.58/depcomp-236- test "x$dir" = "x$object" && dir= hexcurse-1.58/depcomp:237: base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` hexcurse-1.58/depcomp-238- if test "$libtool" = yes; then ############################################## hexcurse-1.58/depcomp-263- # Do two passes, one to just change these to hexcurse-1.58/depcomp:264: # `$object: dependent.h' and one to simply `dependent.h:'. hexcurse-1.58/depcomp-265- sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" ############################################## hexcurse-1.58/depcomp-305- # Do two passes, one to just change these to hexcurse-1.58/depcomp:306: # `$object: dependent.h' and one to simply `dependent.h:'. hexcurse-1.58/depcomp-307- sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" ############################################## hexcurse-1.58/depcomp-321- # Much of this is similar to the tru64 case; see comments there. hexcurse-1.58/depcomp:322: dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` hexcurse-1.58/depcomp-323- test "x$dir" = "x$object" && dir= hexcurse-1.58/depcomp:324: base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` hexcurse-1.58/depcomp-325- if test "$libtool" = yes; then ############################################## hexcurse-1.58/depcomp-365- # Subdirectories are respected. hexcurse-1.58/depcomp:366: dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` hexcurse-1.58/depcomp-367- test "x$dir" = "x$object" && dir= hexcurse-1.58/depcomp:368: base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` hexcurse-1.58/depcomp-369- ############################################## hexcurse-1.58/depcomp-557- done hexcurse-1.58/depcomp:558: obj_suffix=`echo "$object" | sed 's/^.*\././'` hexcurse-1.58/depcomp-559- touch "$tmpdepfile" ############################################## hexcurse-1.58/install-sh-229- fi hexcurse-1.58/install-sh:230: cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; hexcurse-1.58/install-sh-231- *) ############################################## hexcurse-1.58/install-sh-276- dstdir=$dst hexcurse-1.58/install-sh:277: dst=$dstdir/`basename "$src"` hexcurse-1.58/install-sh-278- dstdir_status=0 ############################################## hexcurse-1.58/install-sh-358- # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. hexcurse-1.58/install-sh:359: ls_ld_tmpdir=`ls -ld "$tmpdir"` hexcurse-1.58/install-sh-360- case $ls_ld_tmpdir in ############################################## hexcurse-1.58/install-sh-365- $mkdirprog -m$different_mode -p -- "$tmpdir" && { hexcurse-1.58/install-sh:366: ls_ld_tmpdir_1=`ls -ld "$tmpdir"` hexcurse-1.58/install-sh-367- test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" ############################################## hexcurse-1.58/install-sh-425- case $prefix in hexcurse-1.58/install-sh:426: *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; hexcurse-1.58/install-sh-427- *) qprefix=$prefix;; ############################################## hexcurse-1.58/install-sh-474- if $copy_on_change && hexcurse-1.58/install-sh:475: old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && hexcurse-1.58/install-sh:476: new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && hexcurse-1.58/install-sh-477- ############################################## hexcurse-1.58/man/Makefile.in-47-DIST_SOURCES = hexcurse-1.58/man/Makefile.in:48:am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; hexcurse-1.58/man/Makefile.in-49-am__vpath_adj = case $$p in \ hexcurse-1.58/man/Makefile.in:50: $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ hexcurse-1.58/man/Makefile.in-51- *) f=$$p;; \ hexcurse-1.58/man/Makefile.in-52- esac; hexcurse-1.58/man/Makefile.in:53:am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; hexcurse-1.58/man/Makefile.in-54-am__install_max = 40 hexcurse-1.58/man/Makefile.in-55-am__nobase_strip_setup = \ hexcurse-1.58/man/Makefile.in:56: srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` hexcurse-1.58/man/Makefile.in-57-am__nobase_strip = \ ############################################## hexcurse-1.58/man/Makefile.in-265- else :; fi hexcurse-1.58/man/Makefile.in:266: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ hexcurse-1.58/man/Makefile.in:267: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ hexcurse-1.58/man/Makefile.in-268- list='$(DISTFILES)'; \ ############################################## hexcurse-1.58/man/Makefile.in-279- if test -d $$d/$$file; then \ hexcurse-1.58/man/Makefile.in:280: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ hexcurse-1.58/man/Makefile.in-281- if test -d "$(distdir)/$$file"; then \ ############################################## hexcurse-1.58/missing-129- # Could not run --version or --help. This is probably someone hexcurse-1.58/missing:130: # running `$TOOL --version' or `$TOOL --help' to check whether hexcurse-1.58/missing-131- # $TOOL exists and not knowing $TOOL uses missing. ############################################## hexcurse-1.58/missing-163- from any GNU archive site." hexcurse-1.58/missing:164: files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` hexcurse-1.58/missing-165- test -z "$files" && files="config.h" ############################################## hexcurse-1.58/missing-192- proper tools for further handling them. hexcurse-1.58/missing:193: You can get \`$1' as part of \`Autoconf' from any GNU hexcurse-1.58/missing-194- archive site." hexcurse-1.58/missing-195- hexcurse-1.58/missing:196: file=`echo "$*" | sed -n "$sed_output"` hexcurse-1.58/missing:197: test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` hexcurse-1.58/missing-198- if test -f "$file"; then ############################################## hexcurse-1.58/missing-221- *.y) hexcurse-1.58/missing:222: SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` hexcurse-1.58/missing-223- if test -f "$SRCFILE"; then ############################################## hexcurse-1.58/missing-225- fi hexcurse-1.58/missing:226: SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` hexcurse-1.58/missing-227- if test -f "$SRCFILE"; then ############################################## hexcurse-1.58/missing-251- *.l) hexcurse-1.58/missing:252: SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` hexcurse-1.58/missing-253- if test -f "$SRCFILE"; then ############################################## hexcurse-1.58/missing-270- hexcurse-1.58/missing:271: file=`echo "$*" | sed -n "$sed_output"` hexcurse-1.58/missing:272: test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` hexcurse-1.58/missing-273- if test -f "$file"; then ############################################## hexcurse-1.58/missing-290- # The file to touch is that specified with -o ... hexcurse-1.58/missing:291: file=`echo "$*" | sed -n "$sed_output"` hexcurse-1.58/missing:292: test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` hexcurse-1.58/missing-293- if test -z "$file"; then hexcurse-1.58/missing-294- # ... or it is the one specified with @setfilename ... hexcurse-1.58/missing:295: infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` hexcurse-1.58/missing-296- file=`sed -n ' ############################################## hexcurse-1.58/missing-302- # ... or it is derived from the source name (dir/f.texi becomes f.info) hexcurse-1.58/missing:303: test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info hexcurse-1.58/missing-304- fi ############################################## hexcurse-1.58/src/Makefile.in-260-.c.obj: hexcurse-1.58/src/Makefile.in:261:@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` hexcurse-1.58/src/Makefile.in-262-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ############################################## hexcurse-1.58/src/Makefile.in-264-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ hexcurse-1.58/src/Makefile.in:265:@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` hexcurse-1.58/src/Makefile.in-266- ############################################## hexcurse-1.58/src/Makefile.in-311-GTAGS: hexcurse-1.58/src/Makefile.in:312: here=`$(am__cd) $(top_builddir) && pwd` \ hexcurse-1.58/src/Makefile.in-313- && $(am__cd) $(top_srcdir) \ ############################################## hexcurse-1.58/src/Makefile.in-319-distdir: $(DISTFILES) hexcurse-1.58/src/Makefile.in:320: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ hexcurse-1.58/src/Makefile.in:321: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ hexcurse-1.58/src/Makefile.in-322- list='$(DISTFILES)'; \ ############################################## hexcurse-1.58/src/Makefile.in-333- if test -d $$d/$$file; then \ hexcurse-1.58/src/Makefile.in:334: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ hexcurse-1.58/src/Makefile.in-335- if test -d "$(distdir)/$$file"; then \