=========================================================== .___ __ __ _________________ __ __ __| _/|__|/ |_ / ___\_` __ \__ \ | | \/ __ | | \\_ __\ / /_/ > | \// __ \| | / /_/ | | || | \___ /|__| (____ /____/\____ | |__||__| /_____/ \/ \/ grep rough audit - static analysis tool v2.8 written by @Wireghoul =================================[justanotherhacker.com]=== lsscsi-0.31/config.sub-52- lsscsi-0.31/config.sub:53:me=`echo "$0" | sed -e 's,.*/,,'` lsscsi-0.31/config.sub-54- ############################################## lsscsi-0.31/config.sub-114-# Here we must recognize all the valid KERNEL-OS combinations. lsscsi-0.31/config.sub:115:maybe_os=`echo "$1" | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` lsscsi-0.31/config.sub-116-case $maybe_os in ############################################## lsscsi-0.31/config.sub-122- os=-$maybe_os lsscsi-0.31/config.sub:123: basic_machine=`echo "$1" | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` lsscsi-0.31/config.sub-124- ;; ############################################## lsscsi-0.31/config.sub-126- os=-linux-android lsscsi-0.31/config.sub:127: basic_machine=`echo "$1" | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown lsscsi-0.31/config.sub-128- ;; lsscsi-0.31/config.sub-129- *) lsscsi-0.31/config.sub:130: basic_machine=`echo "$1" | sed 's/-[^-]*$//'` lsscsi-0.31/config.sub-131- if [ "$basic_machine" != "$1" ] lsscsi-0.31/config.sub:132: then os=`echo "$1" | sed 's/.*-/-/'` lsscsi-0.31/config.sub-133- else os=; fi ############################################## lsscsi-0.31/config.sub-180- os=-sco5v6 lsscsi-0.31/config.sub:181: basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` lsscsi-0.31/config.sub-182- ;; ############################################## lsscsi-0.31/config.sub-184- os=-sco3.2v5 lsscsi-0.31/config.sub:185: basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` lsscsi-0.31/config.sub-186- ;; ############################################## lsscsi-0.31/config.sub-188- os=-sco3.2v4 lsscsi-0.31/config.sub:189: basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` lsscsi-0.31/config.sub-190- ;; lsscsi-0.31/config.sub-191- -sco3.2.[4-9]*) lsscsi-0.31/config.sub:192: os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` lsscsi-0.31/config.sub:193: basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` lsscsi-0.31/config.sub-194- ;; ############################################## lsscsi-0.31/config.sub-196- # Don't forget version if it is 3.2v4 or newer. lsscsi-0.31/config.sub:197: basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` lsscsi-0.31/config.sub-198- ;; ############################################## lsscsi-0.31/config.sub-200- # Don't forget version if it is 3.2v4 or newer. lsscsi-0.31/config.sub:201: basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` lsscsi-0.31/config.sub-202- ;; ############################################## lsscsi-0.31/config.sub-204- os=-sco3.2v2 lsscsi-0.31/config.sub:205: basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` lsscsi-0.31/config.sub-206- ;; lsscsi-0.31/config.sub-207- -udk*) lsscsi-0.31/config.sub:208: basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` lsscsi-0.31/config.sub-209- ;; ############################################## lsscsi-0.31/config.sub-211- os=-isc2.2 lsscsi-0.31/config.sub:212: basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` lsscsi-0.31/config.sub-213- ;; ############################################## lsscsi-0.31/config.sub-217- -isc*) lsscsi-0.31/config.sub:218: basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` lsscsi-0.31/config.sub-219- ;; ############################################## lsscsi-0.31/config.sub-229- -ptx*) lsscsi-0.31/config.sub:230: basic_machine=`echo "$1" | sed -e 's/86-.*/86-sequent/'` lsscsi-0.31/config.sub-231- ;; ############################################## lsscsi-0.31/config.sub-364- *-*-*) lsscsi-0.31/config.sub:365: echo Invalid configuration \`"$1"\': machine \`"$basic_machine"\' not recognized 1>&2 lsscsi-0.31/config.sub-366- exit 1 ############################################## lsscsi-0.31/config.sub-493- amd64-*) lsscsi-0.31/config.sub:494: basic_machine=x86_64-`echo "$basic_machine" | sed 's/^[^-]*-//'` lsscsi-0.31/config.sub-495- ;; ############################################## lsscsi-0.31/config.sub-538- blackfin-*) lsscsi-0.31/config.sub:539: basic_machine=bfin-`echo "$basic_machine" | sed 's/^[^-]*-//'` lsscsi-0.31/config.sub-540- os=-linux ############################################## lsscsi-0.31/config.sub-546- c54x-*) lsscsi-0.31/config.sub:547: basic_machine=tic54x-`echo "$basic_machine" | sed 's/^[^-]*-//'` lsscsi-0.31/config.sub-548- ;; lsscsi-0.31/config.sub-549- c55x-*) lsscsi-0.31/config.sub:550: basic_machine=tic55x-`echo "$basic_machine" | sed 's/^[^-]*-//'` lsscsi-0.31/config.sub-551- ;; lsscsi-0.31/config.sub-552- c6x-*) lsscsi-0.31/config.sub:553: basic_machine=tic6x-`echo "$basic_machine" | sed 's/^[^-]*-//'` lsscsi-0.31/config.sub-554- ;; ############################################## lsscsi-0.31/config.sub-650- e500v[12]-*) lsscsi-0.31/config.sub:651: basic_machine=powerpc-`echo "$basic_machine" | sed 's/^[^-]*-//'` lsscsi-0.31/config.sub-652- os=$os"spe" ############################################## lsscsi-0.31/config.sub-754- i*86v32) lsscsi-0.31/config.sub:755: basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'` lsscsi-0.31/config.sub-756- os=-sysv32 ############################################## lsscsi-0.31/config.sub-758- i*86v4*) lsscsi-0.31/config.sub:759: basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'` lsscsi-0.31/config.sub-760- os=-sysv4 ############################################## lsscsi-0.31/config.sub-762- i*86v) lsscsi-0.31/config.sub:763: basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'` lsscsi-0.31/config.sub-764- os=-sysv ############################################## lsscsi-0.31/config.sub-766- i*86sol2) lsscsi-0.31/config.sub:767: basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'` lsscsi-0.31/config.sub-768- os=-solaris2 ############################################## lsscsi-0.31/config.sub-792- leon-*|leon[3-9]-*) lsscsi-0.31/config.sub:793: basic_machine=sparc-`echo "$basic_machine" | sed 's/-.*//'` lsscsi-0.31/config.sub-794- ;; ############################################## lsscsi-0.31/config.sub-799- m68knommu-*) lsscsi-0.31/config.sub:800: basic_machine=m68k-`echo "$basic_machine" | sed 's/^[^-]*-//'` lsscsi-0.31/config.sub-801- os=-linux ############################################## lsscsi-0.31/config.sub-833- mips3*-*) lsscsi-0.31/config.sub:834: basic_machine=`echo "$basic_machine" | sed -e 's/mips3/mips64/'` lsscsi-0.31/config.sub-835- ;; lsscsi-0.31/config.sub-836- mips3*) lsscsi-0.31/config.sub:837: basic_machine=`echo "$basic_machine" | sed -e 's/mips3/mips64/'`-unknown lsscsi-0.31/config.sub-838- ;; ############################################## lsscsi-0.31/config.sub-855- ms1-*) lsscsi-0.31/config.sub:856: basic_machine=`echo "$basic_machine" | sed -e 's/ms1-/mt-/'` lsscsi-0.31/config.sub-857- ;; ############################################## lsscsi-0.31/config.sub-980- parisc-*) lsscsi-0.31/config.sub:981: basic_machine=hppa-`echo "$basic_machine" | sed 's/^[^-]*-//'` lsscsi-0.31/config.sub-982- os=-linux ############################################## lsscsi-0.31/config.sub-996- pc98-*) lsscsi-0.31/config.sub:997: basic_machine=i386-`echo "$basic_machine" | sed 's/^[^-]*-//'` lsscsi-0.31/config.sub-998- ;; ############################################## lsscsi-0.31/config.sub-1011- pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) lsscsi-0.31/config.sub:1012: basic_machine=i586-`echo "$basic_machine" | sed 's/^[^-]*-//'` lsscsi-0.31/config.sub-1013- ;; lsscsi-0.31/config.sub-1014- pentiumpro-* | p6-* | 6x86-* | athlon-*) lsscsi-0.31/config.sub:1015: basic_machine=i686-`echo "$basic_machine" | sed 's/^[^-]*-//'` lsscsi-0.31/config.sub-1016- ;; lsscsi-0.31/config.sub-1017- pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) lsscsi-0.31/config.sub:1018: basic_machine=i686-`echo "$basic_machine" | sed 's/^[^-]*-//'` lsscsi-0.31/config.sub-1019- ;; lsscsi-0.31/config.sub-1020- pentium4-*) lsscsi-0.31/config.sub:1021: basic_machine=i786-`echo "$basic_machine" | sed 's/^[^-]*-//'` lsscsi-0.31/config.sub-1022- ;; ############################################## lsscsi-0.31/config.sub-1030- ppc-* | ppcbe-*) lsscsi-0.31/config.sub:1031: basic_machine=powerpc-`echo "$basic_machine" | sed 's/^[^-]*-//'` lsscsi-0.31/config.sub-1032- ;; ############################################## lsscsi-0.31/config.sub-1036- ppcle-* | powerpclittle-*) lsscsi-0.31/config.sub:1037: basic_machine=powerpcle-`echo "$basic_machine" | sed 's/^[^-]*-//'` lsscsi-0.31/config.sub-1038- ;; ############################################## lsscsi-0.31/config.sub-1040- ;; lsscsi-0.31/config.sub:1041: ppc64-*) basic_machine=powerpc64-`echo "$basic_machine" | sed 's/^[^-]*-//'` lsscsi-0.31/config.sub-1042- ;; ############################################## lsscsi-0.31/config.sub-1046- ppc64le-* | powerpc64little-*) lsscsi-0.31/config.sub:1047: basic_machine=powerpc64le-`echo "$basic_machine" | sed 's/^[^-]*-//'` lsscsi-0.31/config.sub-1048- ;; ############################################## lsscsi-0.31/config.sub-1122- strongarm-* | thumb-*) lsscsi-0.31/config.sub:1123: basic_machine=arm-`echo "$basic_machine" | sed 's/^[^-]*-//'` lsscsi-0.31/config.sub-1124- ;; ############################################## lsscsi-0.31/config.sub-1255- xscale-* | xscalee[bl]-*) lsscsi-0.31/config.sub:1256: basic_machine=`echo "$basic_machine" | sed 's/^xscale/arm/'` lsscsi-0.31/config.sub-1257- ;; ############################################## lsscsi-0.31/config.sub-1317- *) lsscsi-0.31/config.sub:1318: echo Invalid configuration \`"$1"\': machine \`"$basic_machine"\' not recognized 1>&2 lsscsi-0.31/config.sub-1319- exit 1 ############################################## lsscsi-0.31/config.sub-1325- *-digital*) lsscsi-0.31/config.sub:1326: basic_machine=`echo "$basic_machine" | sed 's/digital.*/dec/'` lsscsi-0.31/config.sub-1327- ;; lsscsi-0.31/config.sub-1328- *-commodore*) lsscsi-0.31/config.sub:1329: basic_machine=`echo "$basic_machine" | sed 's/commodore.*/cbm/'` lsscsi-0.31/config.sub-1330- ;; ############################################## lsscsi-0.31/config.sub-1346- -solaris1 | -solaris1.*) lsscsi-0.31/config.sub:1347: os=`echo $os | sed -e 's|solaris1|sunos4|'` lsscsi-0.31/config.sub-1348- ;; ############################################## lsscsi-0.31/config.sub-1355- -gnu/linux*) lsscsi-0.31/config.sub:1356: os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` lsscsi-0.31/config.sub-1357- ;; ############################################## lsscsi-0.31/config.sub-1407- -nto*) lsscsi-0.31/config.sub:1408: os=`echo $os | sed -e 's|nto|nto-qnx|'` lsscsi-0.31/config.sub-1409- ;; ############################################## lsscsi-0.31/config.sub-1414- -mac*) lsscsi-0.31/config.sub:1415: os=`echo "$os" | sed -e 's|mac|macos|'` lsscsi-0.31/config.sub-1416- ;; ############################################## lsscsi-0.31/config.sub-1420- -linux*) lsscsi-0.31/config.sub:1421: os=`echo $os | sed -e 's|linux|linux-gnu|'` lsscsi-0.31/config.sub-1422- ;; lsscsi-0.31/config.sub-1423- -sunos5*) lsscsi-0.31/config.sub:1424: os=`echo "$os" | sed -e 's|sunos5|solaris2|'` lsscsi-0.31/config.sub-1425- ;; lsscsi-0.31/config.sub-1426- -sunos6*) lsscsi-0.31/config.sub:1427: os=`echo "$os" | sed -e 's|sunos6|solaris3|'` lsscsi-0.31/config.sub-1428- ;; ############################################## lsscsi-0.31/config.sub-1469- -sinix5.*) lsscsi-0.31/config.sub:1470: os=`echo $os | sed -e 's|sinix|sysv|'` lsscsi-0.31/config.sub-1471- ;; ############################################## lsscsi-0.31/config.sub-1528- # Get rid of the `-' at the beginning of $os. lsscsi-0.31/config.sub:1529: os=`echo $os | sed 's/[^-]*-//'` lsscsi-0.31/config.sub:1530: echo Invalid configuration \`"$1"\': system \`"$os"\' not recognized 1>&2 lsscsi-0.31/config.sub-1531- exit 1 ############################################## lsscsi-0.31/config.sub-1788- esac lsscsi-0.31/config.sub:1789: basic_machine=`echo "$basic_machine" | sed "s/unknown/$vendor/"` lsscsi-0.31/config.sub-1790- ;; ############################################## lsscsi-0.31/install-sh-234- fi lsscsi-0.31/install-sh:235: cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; lsscsi-0.31/install-sh-236- *) ############################################## lsscsi-0.31/install-sh-281- dstdir=$dst lsscsi-0.31/install-sh:282: dst=$dstdir/`basename "$src"` lsscsi-0.31/install-sh-283- dstdir_status=0 lsscsi-0.31/install-sh-284- else lsscsi-0.31/install-sh:285: dstdir=`dirname "$dst"` lsscsi-0.31/install-sh-286- test -d "$dstdir" ############################################## lsscsi-0.31/install-sh-344- test_tmpdir="$tmpdir/a" lsscsi-0.31/install-sh:345: ls_ld_tmpdir=`ls -ld "$test_tmpdir"` lsscsi-0.31/install-sh-346- case $ls_ld_tmpdir in ############################################## lsscsi-0.31/install-sh-351- $mkdirprog -m$different_mode -p -- "$test_tmpdir" && { lsscsi-0.31/install-sh:352: ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"` lsscsi-0.31/install-sh-353- test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" ############################################## lsscsi-0.31/install-sh-409- case $prefix in lsscsi-0.31/install-sh:410: *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; lsscsi-0.31/install-sh-411- *) qprefix=$prefix;; ############################################## lsscsi-0.31/install-sh-458- if $copy_on_change && lsscsi-0.31/install-sh:459: old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && lsscsi-0.31/install-sh:460: new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && lsscsi-0.31/install-sh-461- set -f && ############################################## lsscsi-0.31/configure-45-if test -z "$BASH_VERSION$ZSH_VERSION" \ lsscsi-0.31/configure:46: && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then lsscsi-0.31/configure-47- as_echo='print -r --' lsscsi-0.31/configure-48- as_echo_n='print -rn --' lsscsi-0.31/configure:49:elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then lsscsi-0.31/configure-50- as_echo='printf %s\n' ############################################## lsscsi-0.31/configure-52-else lsscsi-0.31/configure:53: if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then lsscsi-0.31/configure-54- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' ############################################## lsscsi-0.31/configure-62- expr "X$arg" : "X\\(.*\\)$as_nl"; lsscsi-0.31/configure:63: arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; lsscsi-0.31/configure-64- esac; ############################################## lsscsi-0.31/configure-199- eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && lsscsi-0.31/configure:200: test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 lsscsi-0.31/configure-201-test \$(( 1 + 1 )) = 2 || exit 1" ############################################## lsscsi-0.31/configure-327- case $as_dir in #( lsscsi-0.31/configure:328: *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( lsscsi-0.31/configure-329- *) as_qdir=$as_dir;; ############################################## lsscsi-0.31/configure-400- { lsscsi-0.31/configure:401: as_val=`expr "$@" || test $? -eq 1` lsscsi-0.31/configure-402- } ############################################## lsscsi-0.31/configure-407-# ---------------------------------------- lsscsi-0.31/configure:408:# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are lsscsi-0.31/configure-409-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the ############################################## lsscsi-0.31/configure-470- eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && lsscsi-0.31/configure:471: test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { lsscsi-0.31/configure-472- # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) ############################################## lsscsi-0.31/configure-807- case $ac_option in lsscsi-0.31/configure:808: *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; lsscsi-0.31/configure-809- *=) ac_optarg= ;; ############################################## lsscsi-0.31/configure-851- -disable-* | --disable-*) lsscsi-0.31/configure:852: ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` lsscsi-0.31/configure-853- # Reject names that are not valid shell variable names. ############################################## lsscsi-0.31/configure-856- ac_useropt_orig=$ac_useropt lsscsi-0.31/configure:857: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` lsscsi-0.31/configure-858- case $ac_user_opts in ############################################## lsscsi-0.31/configure-877- -enable-* | --enable-*) lsscsi-0.31/configure:878: ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` lsscsi-0.31/configure-879- # Reject names that are not valid shell variable names. ############################################## lsscsi-0.31/configure-882- ac_useropt_orig=$ac_useropt lsscsi-0.31/configure:883: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` lsscsi-0.31/configure-884- case $ac_user_opts in ############################################## lsscsi-0.31/configure-1090- -with-* | --with-*) lsscsi-0.31/configure:1091: ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` lsscsi-0.31/configure-1092- # Reject names that are not valid shell variable names. ############################################## lsscsi-0.31/configure-1095- ac_useropt_orig=$ac_useropt lsscsi-0.31/configure:1096: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` lsscsi-0.31/configure-1097- case $ac_user_opts in ############################################## lsscsi-0.31/configure-1106- -without-* | --without-*) lsscsi-0.31/configure:1107: ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` lsscsi-0.31/configure-1108- # Reject names that are not valid shell variable names. ############################################## lsscsi-0.31/configure-1111- ac_useropt_orig=$ac_useropt lsscsi-0.31/configure:1112: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` lsscsi-0.31/configure-1113- case $ac_user_opts in ############################################## lsscsi-0.31/configure-1144- *=*) lsscsi-0.31/configure:1145: ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` lsscsi-0.31/configure-1146- # Reject names that are not valid shell variable names. ############################################## lsscsi-0.31/configure-1165-if test -n "$ac_prev"; then lsscsi-0.31/configure:1166: ac_option=--`echo $ac_prev | sed 's/_/-/g'` lsscsi-0.31/configure-1167- as_fn_error $? "missing argument to $ac_option" ############################################## lsscsi-0.31/configure-1187- */ ) lsscsi-0.31/configure:1188: ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` lsscsi-0.31/configure-1189- eval $ac_var=\$ac_val;; ############################################## lsscsi-0.31/configure-1222-ac_ls_di=`ls -di .` && lsscsi-0.31/configure:1223:ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || lsscsi-0.31/configure-1224- as_fn_error $? "working directory cannot be determined" ############################################## lsscsi-0.31/configure-1278-case $srcdir in lsscsi-0.31/configure:1279:*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; lsscsi-0.31/configure-1280-esac ############################################## lsscsi-0.31/configure-1321-By default, \`make install' will install all the files in lsscsi-0.31/configure:1322:\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify lsscsi-0.31/configure:1323:an installation prefix other than \`$ac_default_prefix' using \`--prefix', lsscsi-0.31/configure-1324-for instance \`--prefix=\$HOME'. ############################################## lsscsi-0.31/configure-1414-*) lsscsi-0.31/configure:1415: ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` lsscsi-0.31/configure-1416- # A ".." for each directory in $ac_dir_suffix. lsscsi-0.31/configure:1417: ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` lsscsi-0.31/configure-1418- case $ac_top_builddir_sub in ############################################## lsscsi-0.31/configure-1789- *\'*) lsscsi-0.31/configure:1790: ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; lsscsi-0.31/configure-1791- esac ############################################## lsscsi-0.31/configure-1872- case $ac_val in lsscsi-0.31/configure:1873: *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; lsscsi-0.31/configure-1874- esac ############################################## lsscsi-0.31/configure-1887- case $ac_val in lsscsi-0.31/configure:1888: *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; lsscsi-0.31/configure-1889- esac ############################################## lsscsi-0.31/configure-2007- set,) lsscsi-0.31/configure:2008: { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 lsscsi-0.31/configure:2009:$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} lsscsi-0.31/configure-2010- ac_cache_corrupted=: ;; ############################################## lsscsi-0.31/configure-2018- # differences in whitespace do not lead to failure. lsscsi-0.31/configure:2019: ac_old_val_w=`echo x $ac_old_val` lsscsi-0.31/configure:2020: ac_new_val_w=`echo x $ac_new_val` lsscsi-0.31/configure-2021- if test "$ac_old_val_w" != "$ac_new_val_w"; then ############################################## lsscsi-0.31/configure-2038- case $ac_new_val in lsscsi-0.31/configure:2039: *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; lsscsi-0.31/configure-2040- *) ac_arg=$ac_var=$ac_new_val ;; ############################################## lsscsi-0.31/configure-2214- echo "timestamp, slept: $am_has_slept" > conftest.file lsscsi-0.31/configure:2215: set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` lsscsi-0.31/configure-2216- if test "$*" = "X"; then lsscsi-0.31/configure-2217- # -L didn't work. lsscsi-0.31/configure:2218: set X `ls -t "$srcdir/configure" conftest.file` lsscsi-0.31/configure-2219- fi ############################################## lsscsi-0.31/configure-2265-ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' lsscsi-0.31/configure:2266:program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` lsscsi-0.31/configure-2267- lsscsi-0.31/configure-2268-# Expand $ac_aux_dir to an absolute path. lsscsi-0.31/configure:2269:am_aux_dir=`cd "$ac_aux_dir" && pwd` lsscsi-0.31/configure-2270- ############################################## lsscsi-0.31/configure-2410- as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue lsscsi-0.31/configure:2411: case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( lsscsi-0.31/configure-2412- 'mkdir (GNU coreutils) '* | \ ############################################## lsscsi-0.31/configure-2483-set x ${MAKE-make} lsscsi-0.31/configure:2484:ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` lsscsi-0.31/configure-2485-if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : ############################################## lsscsi-0.31/configure-2493-# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. lsscsi-0.31/configure:2494:case `${MAKE-make} -f conftest.make 2>/dev/null` in lsscsi-0.31/configure-2495- *@@@%%%=?*=@@@%%%*) ############################################## lsscsi-0.31/configure-2559- lsscsi-0.31/configure:2560:if test "`cd $srcdir && pwd`" != "`pwd`"; then lsscsi-0.31/configure-2561- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output ############################################## lsscsi-0.31/configure-3046-$as_echo_n "checking whether the C compiler works... " >&6; } lsscsi-0.31/configure:3047:ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` lsscsi-0.31/configure-3048- ############################################## lsscsi-0.31/configure-3090- then :; else lsscsi-0.31/configure:3091: ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` lsscsi-0.31/configure-3092- fi ############################################## lsscsi-0.31/configure-3150- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; lsscsi-0.31/configure:3151: *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` lsscsi-0.31/configure-3152- break;; ############################################## lsscsi-0.31/configure-3259- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; lsscsi-0.31/configure:3260: *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` lsscsi-0.31/configure-3261- break;; ############################################## lsscsi-0.31/configure-3567-# Ignore all kinds of additional output from 'make'. lsscsi-0.31/configure:3568:case `$am_make -s -f confmf 2> /dev/null` in #( lsscsi-0.31/configure-3569-*the\ am__doit\ target*) ############################################## lsscsi-0.31/configure-3577- echo '.include "confinc"' > confmf lsscsi-0.31/configure:3578: case `$am_make -s -f confmf 2> /dev/null` in #( lsscsi-0.31/configure-3579- *the\ am__doit\ target*) ############################################## lsscsi-0.31/configure-3640- if test "$am_compiler_list" = ""; then lsscsi-0.31/configure:3641: am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` lsscsi-0.31/configure-3642- fi ############################################## lsscsi-0.31/configure-3752-test "x$ac_build_alias" = x && lsscsi-0.31/configure:3753: ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` lsscsi-0.31/configure-3754-test "x$ac_build_alias" = x && lsscsi-0.31/configure-3755- as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 lsscsi-0.31/configure:3756:ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || lsscsi-0.31/configure-3757- as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 ############################################## lsscsi-0.31/configure-3776-IFS=$ac_save_IFS lsscsi-0.31/configure:3777:case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac lsscsi-0.31/configure-3778- ############################################## lsscsi-0.31/configure-3787-else lsscsi-0.31/configure:3788: ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || lsscsi-0.31/configure-3789- as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 ############################################## lsscsi-0.31/configure-3809-IFS=$ac_save_IFS lsscsi-0.31/configure:3810:case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac lsscsi-0.31/configure-3811- ############################################## lsscsi-0.31/configure-4144- # Check for GNU $ac_path_GREP lsscsi-0.31/configure:4145:case `"$ac_path_GREP" --version 2>&1` in lsscsi-0.31/configure-4146-*GNU*) ############################################## lsscsi-0.31/configure-4210- # Check for GNU $ac_path_EGREP lsscsi-0.31/configure:4211:case `"$ac_path_EGREP" --version 2>&1` in lsscsi-0.31/configure-4212-*GNU*) ############################################## lsscsi-0.31/configure-4371-do : lsscsi-0.31/configure:4372: as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` lsscsi-0.31/configure-4373-ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default ############################################## lsscsi-0.31/configure-4376- cat >>confdefs.h <<_ACEOF lsscsi-0.31/configure:4377:#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 lsscsi-0.31/configure-4378-_ACEOF ############################################## lsscsi-0.31/configure-4534- ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' lsscsi-0.31/configure:4535: ac_i=`$as_echo "$ac_i" | sed "$ac_script"` lsscsi-0.31/configure-4536- # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR ############################################## lsscsi-0.31/configure-4629-if test -z "$BASH_VERSION$ZSH_VERSION" \ lsscsi-0.31/configure:4630: && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then lsscsi-0.31/configure-4631- as_echo='print -r --' lsscsi-0.31/configure-4632- as_echo_n='print -rn --' lsscsi-0.31/configure:4633:elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then lsscsi-0.31/configure-4634- as_echo='printf %s\n' ############################################## lsscsi-0.31/configure-4636-else lsscsi-0.31/configure:4637: if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then lsscsi-0.31/configure-4638- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' ############################################## lsscsi-0.31/configure-4646- expr "X$arg" : "X\\(.*\\)$as_nl"; lsscsi-0.31/configure:4647: arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; lsscsi-0.31/configure-4648- esac; ############################################## lsscsi-0.31/configure-4723-# ---------------------------------------- lsscsi-0.31/configure:4724:# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are lsscsi-0.31/configure-4725-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the ############################################## lsscsi-0.31/configure-4795- { lsscsi-0.31/configure:4796: as_val=`expr "$@" || test $? -eq 1` lsscsi-0.31/configure-4797- } ############################################## lsscsi-0.31/configure-4899- case $as_dir in #( lsscsi-0.31/configure:4900: *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( lsscsi-0.31/configure-4901- *) as_qdir=$as_dir;; ############################################## lsscsi-0.31/configure-5034-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 lsscsi-0.31/configure:5035:ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" lsscsi-0.31/configure-5036-ac_cs_version="\\ ############################################## lsscsi-0.31/configure-5059- --*=?*) lsscsi-0.31/configure:5060: ac_option=`expr "X$1" : 'X\([^=]*\)='` lsscsi-0.31/configure:5061: ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` lsscsi-0.31/configure-5062- ac_shift=: ############################################## lsscsi-0.31/configure-5064- --*=) lsscsi-0.31/configure:5065: ac_option=`expr "X$1" : 'X\([^=]*\)='` lsscsi-0.31/configure-5066- ac_optarg= ############################################## lsscsi-0.31/configure-5088- case $ac_optarg in lsscsi-0.31/configure:5089: *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; lsscsi-0.31/configure-5090- '') as_fn_error $? "missing file argument" ;; ############################################## lsscsi-0.31/configure-5096- case $ac_optarg in lsscsi-0.31/configure:5097: *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; lsscsi-0.31/configure-5098- esac ############################################## lsscsi-0.31/configure-5226-fi lsscsi-0.31/configure:5227:ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null` lsscsi-0.31/configure-5228-if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then ############################################## lsscsi-0.31/configure-5243- as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 lsscsi-0.31/configure:5244:ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` lsscsi-0.31/configure-5245-ac_delim='%!_!# ' ############################################## lsscsi-0.31/configure-5249- lsscsi-0.31/configure:5250: ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` lsscsi-0.31/configure-5251- if test $ac_delim_n = $ac_delim_num; then ############################################## lsscsi-0.31/configure-5387-for ac_last_try in false false :; do lsscsi-0.31/configure:5388: ac_tt=`sed -n "/$ac_delim/p" confdefs.h` lsscsi-0.31/configure-5389- if test -z "$ac_tt"; then ############################################## lsscsi-0.31/configure-5519- esac lsscsi-0.31/configure:5520: case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac lsscsi-0.31/configure-5521- as_fn_append ac_file_inputs " '$ac_f'" ############################################## lsscsi-0.31/configure-5578-*) lsscsi-0.31/configure:5579: ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` lsscsi-0.31/configure-5580- # A ".." for each directory in $ac_dir_suffix. lsscsi-0.31/configure:5581: ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` lsscsi-0.31/configure-5582- case $ac_top_builddir_sub in ############################################## lsscsi-0.31/configure-5639-/@mandir@/p' lsscsi-0.31/configure:5640:case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in lsscsi-0.31/configure-5641-*datarootdir*) ac_datarootdir_seen=yes;; ############################################## lsscsi-0.31/configure-5656- lsscsi-0.31/configure:5657:# Neutralize VPATH when `$srcdir' = `.'. lsscsi-0.31/configure-5658-# Shell code in configure.ac might set extrasub. ############################################## lsscsi-0.31/configure-5684-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && lsscsi-0.31/configure:5685: { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && lsscsi-0.31/configure-5686- { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ ############################################## lsscsi-0.31/configure-5730- * ) lsscsi-0.31/configure:5731: _am_stamp_count=`expr $_am_stamp_count + 1` ;; lsscsi-0.31/configure-5732- esac ############################################## lsscsi-0.31/configure-5777- # Strip MF so we end up with the name of the file. lsscsi-0.31/configure:5778: mf=`echo "$mf" | sed -e 's/:.*$//'` lsscsi-0.31/configure-5779- # Check whether this is an Automake generated Makefile or not. ############################################## lsscsi-0.31/configure-5814- # from the Makefile without running 'make'. lsscsi-0.31/configure:5815: DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` lsscsi-0.31/configure-5816- test -z "$DEPDIR" && continue lsscsi-0.31/configure:5817: am__include=`sed -n 's/^am__include = //p' < "$mf"` lsscsi-0.31/configure-5818- test -z "$am__include" && continue lsscsi-0.31/configure:5819: am__quote=`sed -n 's/^am__quote = //p' < "$mf"` lsscsi-0.31/configure-5820- # Find all dependency output files, they are included files with ############################################## lsscsi-0.31/Makefile.in-49- { \ lsscsi-0.31/Makefile.in:50: flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ lsscsi-0.31/Makefile.in-51- }; \ ############################################## lsscsi-0.31/Makefile.in-179- while test -n "$$dir1"; do \ lsscsi-0.31/Makefile.in:180: first=`echo "$$dir1" | sed -e "$$sed_first"`; \ lsscsi-0.31/Makefile.in-181- if test "$$first" != "."; then \ lsscsi-0.31/Makefile.in-182- if test "$$first" = ".."; then \ lsscsi-0.31/Makefile.in:183: dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ lsscsi-0.31/Makefile.in:184: dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ lsscsi-0.31/Makefile.in-185- else \ lsscsi-0.31/Makefile.in:186: first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ lsscsi-0.31/Makefile.in-187- if test "$$first2" = "$$first"; then \ lsscsi-0.31/Makefile.in:188: dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ lsscsi-0.31/Makefile.in-189- else \ ############################################## lsscsi-0.31/Makefile.in-194- fi; \ lsscsi-0.31/Makefile.in:195: dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ lsscsi-0.31/Makefile.in-196- done; \ ############################################## lsscsi-0.31/Makefile.in-372- dot_seen=no; \ lsscsi-0.31/Makefile.in:373: target=`echo $@ | sed s/-recursive//`; \ lsscsi-0.31/Makefile.in-374- case "$@" in \ ############################################## lsscsi-0.31/Makefile.in-435-GTAGS: lsscsi-0.31/Makefile.in:436: here=`$(am__cd) $(top_builddir) && pwd` \ lsscsi-0.31/Makefile.in-437- && $(am__cd) $(top_srcdir) \ ############################################## lsscsi-0.31/Makefile.in-467- test -d "$(distdir)" || mkdir "$(distdir)" lsscsi-0.31/Makefile.in:468: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ lsscsi-0.31/Makefile.in:469: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ lsscsi-0.31/Makefile.in-470- list='$(DISTFILES)'; \ ############################################## lsscsi-0.31/Makefile.in-481- if test -d $$d/$$file; then \ lsscsi-0.31/Makefile.in:482: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ lsscsi-0.31/Makefile.in-483- if test -d "$(distdir)/$$file"; then \ ############################################## lsscsi-0.31/Makefile.in-592- test -d $(distdir)/_build || exit 0; \ lsscsi-0.31/Makefile.in:593: dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ lsscsi-0.31/Makefile.in-594- && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ ############################################## lsscsi-0.31/Makefile.in-636- }; \ lsscsi-0.31/Makefile.in:637: test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ lsscsi-0.31/Makefile.in-638- || { echo "ERROR: files left after uninstall:" ; \ ############################################## lsscsi-0.31/Makefile.in-648- fi lsscsi-0.31/Makefile.in:649: @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ lsscsi-0.31/Makefile.in-650- || { echo "ERROR: files left in build directory after distclean:" ; \ ############################################## lsscsi-0.31/aclocal.m4-152-# iff we strip the leading $srcdir from $ac_aux_dir. That would be: lsscsi-0.31/aclocal.m4:153:# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` lsscsi-0.31/aclocal.m4-154-# and then we would define $MISSING as ############################################## lsscsi-0.31/aclocal.m4-167-# Expand $ac_aux_dir to an absolute path. lsscsi-0.31/aclocal.m4:168:am_aux_dir=`cd "$ac_aux_dir" && pwd` lsscsi-0.31/aclocal.m4-169-]) ############################################## lsscsi-0.31/aclocal.m4-265- if test "$am_compiler_list" = ""; then lsscsi-0.31/aclocal.m4:266: am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` lsscsi-0.31/aclocal.m4-267- fi ############################################## lsscsi-0.31/aclocal.m4-416- # Strip MF so we end up with the name of the file. lsscsi-0.31/aclocal.m4:417: mf=`echo "$mf" | sed -e 's/:.*$//'` lsscsi-0.31/aclocal.m4-418- # Check whether this is an Automake generated Makefile or not. ############################################## lsscsi-0.31/aclocal.m4-425- if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then lsscsi-0.31/aclocal.m4:426: dirpart=`AS_DIRNAME("$mf")` lsscsi-0.31/aclocal.m4-427- else ############################################## lsscsi-0.31/aclocal.m4-431- # from the Makefile without running 'make'. lsscsi-0.31/aclocal.m4:432: DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` lsscsi-0.31/aclocal.m4-433- test -z "$DEPDIR" && continue lsscsi-0.31/aclocal.m4:434: am__include=`sed -n 's/^am__include = //p' < "$mf"` lsscsi-0.31/aclocal.m4-435- test -z "$am__include" && continue lsscsi-0.31/aclocal.m4:436: am__quote=`sed -n 's/^am__quote = //p' < "$mf"` lsscsi-0.31/aclocal.m4-437- # Find all dependency output files, they are included files with ############################################## lsscsi-0.31/aclocal.m4-445- test -f "$dirpart/$file" && continue lsscsi-0.31/aclocal.m4:446: fdir=`AS_DIRNAME(["$file"])` lsscsi-0.31/aclocal.m4-447- AS_MKDIR_P([$dirpart/$fdir]) ############################################## lsscsi-0.31/aclocal.m4-503-AC_REQUIRE([AC_PROG_INSTALL])dnl lsscsi-0.31/aclocal.m4:504:if test "`cd $srcdir && pwd`" != "`pwd`"; then lsscsi-0.31/aclocal.m4-505- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output ############################################## lsscsi-0.31/aclocal.m4-662- * ) lsscsi-0.31/aclocal.m4:663: _am_stamp_count=`expr $_am_stamp_count + 1` ;; lsscsi-0.31/aclocal.m4-664- esac lsscsi-0.31/aclocal.m4-665-done lsscsi-0.31/aclocal.m4:666:echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) lsscsi-0.31/aclocal.m4-667- ############################################## lsscsi-0.31/aclocal.m4-769-# Ignore all kinds of additional output from 'make'. lsscsi-0.31/aclocal.m4:770:case `$am_make -s -f confmf 2> /dev/null` in #( lsscsi-0.31/aclocal.m4-771-*the\ am__doit\ target*) ############################################## lsscsi-0.31/aclocal.m4-779- echo '.include "confinc"' > confmf lsscsi-0.31/aclocal.m4:780: case `$am_make -s -f confmf 2> /dev/null` in #( lsscsi-0.31/aclocal.m4-781- *the\ am__doit\ target*) ############################################## lsscsi-0.31/aclocal.m4-990- echo "timestamp, slept: $am_has_slept" > conftest.file lsscsi-0.31/aclocal.m4:991: set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` lsscsi-0.31/aclocal.m4-992- if test "$[*]" = "X"; then lsscsi-0.31/aclocal.m4-993- # -L didn't work. lsscsi-0.31/aclocal.m4:994: set X `ls -t "$srcdir/configure" conftest.file` lsscsi-0.31/aclocal.m4-995- fi ############################################## lsscsi-0.31/src/Makefile.in-50- { \ lsscsi-0.31/src/Makefile.in:51: flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ lsscsi-0.31/src/Makefile.in-52- }; \ ############################################## lsscsi-0.31/src/Makefile.in-370-.c.obj: lsscsi-0.31/src/Makefile.in:371:@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` lsscsi-0.31/src/Makefile.in-372-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ############################################## lsscsi-0.31/src/Makefile.in-374-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ lsscsi-0.31/src/Makefile.in:375:@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` lsscsi-0.31/src/Makefile.in-376- ############################################## lsscsi-0.31/src/Makefile.in-406-GTAGS: lsscsi-0.31/src/Makefile.in:407: here=`$(am__cd) $(top_builddir) && pwd` \ lsscsi-0.31/src/Makefile.in-408- && $(am__cd) $(top_srcdir) \ ############################################## lsscsi-0.31/src/Makefile.in-429-distdir: $(DISTFILES) lsscsi-0.31/src/Makefile.in:430: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ lsscsi-0.31/src/Makefile.in:431: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ lsscsi-0.31/src/Makefile.in-432- list='$(DISTFILES)'; \ ############################################## lsscsi-0.31/src/Makefile.in-443- if test -d $$d/$$file; then \ lsscsi-0.31/src/Makefile.in:444: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ lsscsi-0.31/src/Makefile.in-445- if test -d "$(distdir)/$$file"; then \ ############################################## lsscsi-0.31/compile-67- mingw/*) lsscsi-0.31/compile:68: file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'` lsscsi-0.31/compile-69- ;; lsscsi-0.31/compile-70- cygwin/*) lsscsi-0.31/compile:71: file=`cygpath -m "$file" || echo "$file"` lsscsi-0.31/compile-72- ;; lsscsi-0.31/compile-73- wine/*) lsscsi-0.31/compile:74: file=`winepath -w "$file" || echo "$file"` lsscsi-0.31/compile-75- ;; ############################################## lsscsi-0.31/compile-309-# Name of file we expect compiler to create. lsscsi-0.31/compile:310:cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'` lsscsi-0.31/compile-311- ############################################## lsscsi-0.31/compile-315-# object file name, since that is what matters with a parallel build. lsscsi-0.31/compile:316:lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d lsscsi-0.31/compile-317-while true; do ############################################## lsscsi-0.31/config.guess-34- lsscsi-0.31/config.guess:35:me=`echo "$0" | sed -e 's,.*/,,'` lsscsi-0.31/config.guess-36- ############################################## lsscsi-0.31/config.guess-102-: ${TMPDIR=/tmp} ; lsscsi-0.31/config.guess:103: { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || lsscsi-0.31/config.guess-104- { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || ############################################## lsscsi-0.31/config.guess-151- EOF lsscsi-0.31/config.guess:152: eval "`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^LIBC' | sed 's, ,,g'`" lsscsi-0.31/config.guess-153- ############################################## lsscsi-0.31/config.guess-188- earmv*) lsscsi-0.31/config.guess:189: arch=`echo "$UNAME_MACHINE_ARCH" | sed -e 's,^e\(armv[0-9]\).*$,\1,'` lsscsi-0.31/config.guess:190: endian=`echo "$UNAME_MACHINE_ARCH" | sed -ne 's,^.*\(eb\)$,\1,p'` lsscsi-0.31/config.guess-191- machine="${arch}${endian}"-unknown ############################################## lsscsi-0.31/config.guess-220- expr='s/^earmv[0-9]/-eabi/;s/eb$//' lsscsi-0.31/config.guess:221: abi=`echo "$UNAME_MACHINE_ARCH" | sed -e "$expr"` lsscsi-0.31/config.guess-222- ;; ############################################## lsscsi-0.31/config.guess-233- *) lsscsi-0.31/config.guess:234: release=`echo "$UNAME_RELEASE" | sed -e 's/[-_].*//' | cut -d. -f1,2` lsscsi-0.31/config.guess-235- ;; ############################################## lsscsi-0.31/config.guess-280- *4.0) lsscsi-0.31/config.guess:281: UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` lsscsi-0.31/config.guess-282- ;; lsscsi-0.31/config.guess-283- *5.*) lsscsi-0.31/config.guess:284: UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` lsscsi-0.31/config.guess-285- ;; ############################################## lsscsi-0.31/config.guess-290- # types through head -n 1, so we only detect the type of CPU 0. lsscsi-0.31/config.guess:291: ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` lsscsi-0.31/config.guess-292- case "$ALPHA_CPU_TYPE" in ############################################## lsscsi-0.31/config.guess-328- # 1.2 uses "1.2" for uname -r. lsscsi-0.31/config.guess:329: echo "$UNAME_MACHINE"-dec-osf"`echo "$UNAME_RELEASE" | sed -e 's/^[PVTX]//' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`" lsscsi-0.31/config.guess-330- # Reset EXIT trap before exiting to avoid spurious non-zero exit code. ############################################## lsscsi-0.31/config.guess-379- s390x:SunOS:*:*) lsscsi-0.31/config.guess:380: echo "$UNAME_MACHINE"-ibm-solaris2"`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`" lsscsi-0.31/config.guess-381- exit ;; lsscsi-0.31/config.guess-382- sun4H:SunOS:5.*:*) lsscsi-0.31/config.guess:383: echo sparc-hal-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`" lsscsi-0.31/config.guess-384- exit ;; lsscsi-0.31/config.guess-385- sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) lsscsi-0.31/config.guess:386: echo sparc-sun-solaris2"`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`" lsscsi-0.31/config.guess-387- exit ;; ############################################## lsscsi-0.31/config.guess-404- fi lsscsi-0.31/config.guess:405: echo "$SUN_ARCH"-pc-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`" lsscsi-0.31/config.guess-406- exit ;; ############################################## lsscsi-0.31/config.guess-410- # it's likely to be more like Solaris than SunOS4. lsscsi-0.31/config.guess:411: echo sparc-sun-solaris3"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`" lsscsi-0.31/config.guess-412- exit ;; ############################################## lsscsi-0.31/config.guess-419- # Japanese Language versions have a version number like `4.1.3-JL'. lsscsi-0.31/config.guess:420: echo sparc-sun-sunos"`echo "$UNAME_RELEASE"|sed -e 's/-/_/'`" lsscsi-0.31/config.guess-421- exit ;; ############################################## lsscsi-0.31/config.guess-425- sun*:*:4.2BSD:*) lsscsi-0.31/config.guess:426: UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` lsscsi-0.31/config.guess-427- test "x$UNAME_RELEASE" = x && UNAME_RELEASE=3 ############################################## lsscsi-0.31/config.guess-507- $CC_FOR_BUILD -o "$dummy" "$dummy.c" && lsscsi-0.31/config.guess:508: dummyarg=`echo "$UNAME_RELEASE" | sed -n 's/\([0-9]*\).*/\1/p'` && lsscsi-0.31/config.guess:509: SYSTEM_NAME=`"$dummy" "$dummyarg"` && lsscsi-0.31/config.guess-510- { echo "$SYSTEM_NAME"; exit; } ############################################## lsscsi-0.31/config.guess-563- *:IRIX*:*:*) lsscsi-0.31/config.guess:564: echo mips-sgi-irix"`echo "$UNAME_RELEASE"|sed -e 's/-/_/g'`" lsscsi-0.31/config.guess-565- exit ;; ############################################## lsscsi-0.31/config.guess-593-EOF lsscsi-0.31/config.guess:594: if $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"` lsscsi-0.31/config.guess-595- then ############################################## lsscsi-0.31/config.guess-606- *:AIX:*:[4567]) lsscsi-0.31/config.guess:607: IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` lsscsi-0.31/config.guess-608- if /usr/sbin/lsattr -El "$IBM_CPU_ID" | grep ' POWER' >/dev/null 2>&1; then ############################################## lsscsi-0.31/config.guess-642- 9000/[34678]??:HP-UX:*:*) lsscsi-0.31/config.guess:643: HPUX_REV=`echo "$UNAME_RELEASE"|sed -e 's/[^.]*.[0B]*//'` lsscsi-0.31/config.guess-644- case "$UNAME_MACHINE" in ############################################## lsscsi-0.31/config.guess-696-EOF lsscsi-0.31/config.guess:697: (CCOPTS="" $CC_FOR_BUILD -o "$dummy" "$dummy.c" 2>/dev/null) && HP_ARCH=`"$dummy"` lsscsi-0.31/config.guess-698- test -z "$HP_ARCH" && HP_ARCH=hppa ############################################## lsscsi-0.31/config.guess-724- ia64:HP-UX:*:*) lsscsi-0.31/config.guess:725: HPUX_REV=`echo "$UNAME_RELEASE"|sed -e 's/[^.]*.[0B]*//'` lsscsi-0.31/config.guess-726- echo ia64-hp-hpux"$HPUX_REV" ############################################## lsscsi-0.31/config.guess-754-EOF lsscsi-0.31/config.guess:755: $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"` && lsscsi-0.31/config.guess-756- { echo "$SYSTEM_NAME"; exit; } ############################################## lsscsi-0.31/config.guess-825- FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'` lsscsi-0.31/config.guess:826: FUJITSU_REL=`echo "$UNAME_RELEASE" | sed -e 's/ /_/'` lsscsi-0.31/config.guess-827- echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" ############################################## lsscsi-0.31/config.guess-830- FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'` lsscsi-0.31/config.guess:831: FUJITSU_REL=`echo "$UNAME_RELEASE" | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/ /_/'` lsscsi-0.31/config.guess-832- echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" ############################################## lsscsi-0.31/config.guess-850- esac lsscsi-0.31/config.guess:851: echo "$UNAME_PROCESSOR"-unknown-freebsd"`echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`" lsscsi-0.31/config.guess-852- exit ;; ############################################## lsscsi-0.31/config.guess-886- prep*:SunOS:5.*:*) lsscsi-0.31/config.guess:887: echo powerpcle-unknown-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`" lsscsi-0.31/config.guess-888- exit ;; ############################################## lsscsi-0.31/config.guess-890- # the GNU system lsscsi-0.31/config.guess:891: echo "`echo "$UNAME_MACHINE"|sed -e 's,[-/].*$,,'`-unknown-$LIBC`echo "$UNAME_RELEASE"|sed -e 's,/.*$,,'`" lsscsi-0.31/config.guess-892- exit ;; ############################################## lsscsi-0.31/config.guess-894- # other systems with GNU libc and userland lsscsi-0.31/config.guess:895: echo "$UNAME_MACHINE-unknown-`echo "$UNAME_SYSTEM" | sed 's,^[^/]*/,,' | tr "[:upper:]" "[:lower:]"``echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`-$LIBC" lsscsi-0.31/config.guess-896- exit ;; ############################################## lsscsi-0.31/config.guess-988-EOF lsscsi-0.31/config.guess:989: eval "`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^CPU'`" lsscsi-0.31/config.guess-990- test "x$CPU" != x && { echo "$CPU-unknown-linux-$LIBC"; exit; } ############################################## lsscsi-0.31/config.guess-1092- i*86:*:4.*:*) lsscsi-0.31/config.guess:1093: UNAME_REL=`echo "$UNAME_RELEASE" | sed 's/\/MP$//'` lsscsi-0.31/config.guess-1094- if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then ############################################## lsscsi-0.31/config.guess-1295- fi lsscsi-0.31/config.guess:1296: if test "`echo "$UNAME_RELEASE" | sed -e 's/\..*//'`" -le 10 ; then lsscsi-0.31/config.guess-1297- if [ "$CC_FOR_BUILD" != no_compiler_found ]; then ############################################## lsscsi-0.31/config.guess-1393- *:DragonFly:*:*) lsscsi-0.31/config.guess:1394: echo "$UNAME_MACHINE"-unknown-dragonfly"`echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`" lsscsi-0.31/config.guess-1395- exit ;; ############################################## lsscsi-0.31/config.guess-1406- i*86:skyos:*:*) lsscsi-0.31/config.guess:1407: echo "$UNAME_MACHINE"-pc-skyos"`echo "$UNAME_RELEASE" | sed -e 's/ .*$//'`" lsscsi-0.31/config.guess-1408- exit ;; ############################################## lsscsi-0.31/depcomp-64- case $1 in lsscsi-0.31/depcomp:65: */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;; lsscsi-0.31/depcomp-66- *) dir=;; ############################################## lsscsi-0.31/depcomp-73-{ lsscsi-0.31/depcomp:74: base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'` lsscsi-0.31/depcomp-75-} ############################################## lsscsi-0.31/depcomp-126- sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} lsscsi-0.31/depcomp:127:tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} lsscsi-0.31/depcomp-128- ############################################## lsscsi-0.31/depcomp-405- sleep 1 lsscsi-0.31/depcomp:406: i=`expr $i - 1` lsscsi-0.31/depcomp-407- done lsscsi-0.31/depcomp-408- fi lsscsi-0.31/depcomp:409: i=`expr $i - 1` lsscsi-0.31/depcomp-410- done ############################################## lsscsi-0.31/depcomp-425- # Do two passes, one to just change these to lsscsi-0.31/depcomp:426: # `$object: dependent.h' and one to simply `dependent.h:'. lsscsi-0.31/depcomp-427- sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" ############################################## lsscsi-0.31/depcomp-659- done lsscsi-0.31/depcomp:660: obj_suffix=`echo "$object" | sed 's/^.*\././'` lsscsi-0.31/depcomp-661- touch "$tmpdepfile" ############################################## lsscsi-0.31/ar-lib-65- mingw) lsscsi-0.31/ar-lib:66: file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'` lsscsi-0.31/ar-lib-67- ;; lsscsi-0.31/ar-lib-68- cygwin) lsscsi-0.31/ar-lib:69: file=`cygpath -m "$file" || echo "$file"` lsscsi-0.31/ar-lib-70- ;; lsscsi-0.31/ar-lib-71- wine) lsscsi-0.31/ar-lib:72: file=`winepath -w "$file" || echo "$file"` lsscsi-0.31/ar-lib-73- ;; ############################################## lsscsi-0.31/ar-lib-88- archive=$3 lsscsi-0.31/ar-lib:89: at_file_contents=`cat "$1"` lsscsi-0.31/ar-lib-90- eval set x "$at_file_contents" ############################################## lsscsi-0.31/doc/Makefile.in-49- { \ lsscsi-0.31/doc/Makefile.in:50: flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ lsscsi-0.31/doc/Makefile.in-51- }; \ ############################################## lsscsi-0.31/doc/Makefile.in-118- esac lsscsi-0.31/doc/Makefile.in:119:am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; lsscsi-0.31/doc/Makefile.in-120-am__vpath_adj = case $$p in \ lsscsi-0.31/doc/Makefile.in:121: $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ lsscsi-0.31/doc/Makefile.in-122- *) f=$$p;; \ lsscsi-0.31/doc/Makefile.in-123- esac; lsscsi-0.31/doc/Makefile.in:124:am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; lsscsi-0.31/doc/Makefile.in-125-am__install_max = 40 lsscsi-0.31/doc/Makefile.in-126-am__nobase_strip_setup = \ lsscsi-0.31/doc/Makefile.in:127: srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` lsscsi-0.31/doc/Makefile.in-128-am__nobase_strip = \ ############################################## lsscsi-0.31/doc/Makefile.in-289- test -n "$(man8dir)" \ lsscsi-0.31/doc/Makefile.in:290: && test -n "`echo $$list1$$list2`" \ lsscsi-0.31/doc/Makefile.in-291- || exit 0; \ ############################################## lsscsi-0.31/doc/Makefile.in-335-distdir: $(DISTFILES) lsscsi-0.31/doc/Makefile.in:336: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ lsscsi-0.31/doc/Makefile.in:337: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ lsscsi-0.31/doc/Makefile.in-338- list='$(DISTFILES)'; \ ############################################## lsscsi-0.31/doc/Makefile.in-349- if test -d $$d/$$file; then \ lsscsi-0.31/doc/Makefile.in:350: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ lsscsi-0.31/doc/Makefile.in-351- if test -d "$(distdir)/$$file"; then \ ############################################## lsscsi-0.31/autogen.sh-98- # extract copyright from header lsscsi-0.31/autogen.sh:99: __copyright="`grep Copyright $AUTOGEN_SH | head -${HEAD_N}1 | awk '{print $4}'`" lsscsi-0.31/autogen.sh-100- if [ "x$__copyright" = "x" ] ; then ############################################## lsscsi-0.31/autogen.sh-105- __id="$Id: autogen.sh 33925 2009-03-01 23:27:06Z brlcad $" lsscsi-0.31/autogen.sh:106: __version="`echo $__id | sed 's/.*\([0-9][0-9][0-9][0-9]\)[-\/]\([0-9][0-9]\)[-\/]\([0-9][0-9]\).*/\1\2\3/'`" lsscsi-0.31/autogen.sh-107- if [ "x$__version" = "x" ] ; then ############################################## lsscsi-0.31/autogen.sh-184- # needed to handle versions like 1.10 and 1.4-p6 lsscsi-0.31/autogen.sh:185: _min="`echo ${_min}. | sed 's/[^0-9]/./g' | sed 's/\.\././g'`" lsscsi-0.31/autogen.sh:186: _cur="`echo ${_cur}. | sed 's/[^0-9]/./g' | sed 's/\.\././g'`" lsscsi-0.31/autogen.sh-187- lsscsi-0.31/autogen.sh:188: _min_major="`echo $_min | cut -d. -f1`" lsscsi-0.31/autogen.sh:189: _min_minor="`echo $_min | cut -d. -f2`" lsscsi-0.31/autogen.sh:190: _min_patch="`echo $_min | cut -d. -f3`" lsscsi-0.31/autogen.sh-191- lsscsi-0.31/autogen.sh:192: _cur_major="`echo $_cur | cut -d. -f1`" lsscsi-0.31/autogen.sh:193: _cur_minor="`echo $_cur | cut -d. -f2`" lsscsi-0.31/autogen.sh:194: _cur_patch="`echo $_cur | cut -d. -f3`" lsscsi-0.31/autogen.sh-195- ############################################## lsscsi-0.31/autogen.sh-258-ARGS="$*" lsscsi-0.31/autogen.sh:259:PATH_TO_AUTOGEN="`dirname $0`" lsscsi-0.31/autogen.sh:260:NAME_OF_AUTOGEN="`basename $0`" lsscsi-0.31/autogen.sh-261-AUTOGEN_SH="$PATH_TO_AUTOGEN/$NAME_OF_AUTOGEN" ############################################## lsscsi-0.31/autogen.sh-403-################################################ lsscsi-0.31/autogen.sh:404:if [ "x`echo $ARGS | sed 's/.*[hH][eE][lL][pP].*/help/'`" = "xhelp" ] ; then lsscsi-0.31/autogen.sh-405- HELP=yes ############################################## lsscsi-0.31/autogen.sh-494-if [ "x$PROJECT" = "x" ] ; then lsscsi-0.31/autogen.sh:495: PROJECT="`grep AC_INIT $CONFIGURE | grep -v '.*#.*AC_INIT' | tail -${TAIL_N}1 | sed 's/^[ ]*AC_INIT(\([^,)]*\).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`" lsscsi-0.31/autogen.sh-496- if [ "x$PROJECT" = "xAC_INIT" ] ; then lsscsi-0.31/autogen.sh-497- # projects might be using the older/deprecated arg-less AC_INIT .. look for AM_INIT_AUTOMAKE instead lsscsi-0.31/autogen.sh:498: PROJECT="`grep AM_INIT_AUTOMAKE $CONFIGURE | grep -v '.*#.*AM_INIT_AUTOMAKE' | tail -${TAIL_N}1 | sed 's/^[ ]*AM_INIT_AUTOMAKE(\([^,)]*\).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`" lsscsi-0.31/autogen.sh-499- fi ############################################## lsscsi-0.31/autogen.sh-554-else lsscsi-0.31/autogen.sh:555: _version="`$AUTOCONF --version | head -${HEAD_N}1 | sed 's/[^0-9]*\([0-9\.][0-9\.]*\)/\1/'`" lsscsi-0.31/autogen.sh-556- if [ "x$_version" = "x" ] ; then ############################################## lsscsi-0.31/autogen.sh-595-else lsscsi-0.31/autogen.sh:596: _version="`$AUTOMAKE --version | head -${HEAD_N}1 | sed 's/[^0-9]*\([0-9\.][0-9\.]*\)/\1/'`" lsscsi-0.31/autogen.sh-597- if [ "x$_version" = "x" ] ; then ############################################## lsscsi-0.31/autogen.sh-636- $VERBOSE_ECHO "Checking libtoolize alternate: $tool --version" lsscsi-0.31/autogen.sh:637: _glibtoolize="`$tool --version > /dev/null 2>&1`" lsscsi-0.31/autogen.sh-638- if [ $? = 0 ] ; then lsscsi-0.31/autogen.sh-639- $VERBOSE_ECHO "Found $tool --version" lsscsi-0.31/autogen.sh:640: _glti="`which $tool`" lsscsi-0.31/autogen.sh-641- if [ "x$_glti" = "x" ] ; then ############################################## lsscsi-0.31/autogen.sh-648- fi lsscsi-0.31/autogen.sh:649: _gltidir="`dirname $_glti`" lsscsi-0.31/autogen.sh-650- if [ "x$_gltidir" = "x" ] ; then ############################################## lsscsi-0.31/autogen.sh-697-else lsscsi-0.31/autogen.sh:698: _version="`$LIBTOOLIZE --version | head -${HEAD_N}1 | sed 's/[^0-9]*\([0-9\.][0-9\.]*\)/\1/'`" lsscsi-0.31/autogen.sh-699- if [ "x$_version" = "x" ] ; then ############################################## lsscsi-0.31/autogen.sh-814- # $VERBOSE_ECHO "Looking for subdirs in `pwd`" lsscsi-0.31/autogen.sh:815: _det_config_subdirs="`grep AC_CONFIG_SUBDIRS $_configure | grep -v '.*#.*AC_CONFIG_SUBDIRS' | sed 's/^[ ]*AC_CONFIG_SUBDIRS(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`" lsscsi-0.31/autogen.sh-816- CHECK_DIRS="" ############################################## lsscsi-0.31/autogen.sh-853- # compare entire content, restore if needed lsscsi-0.31/autogen.sh:854: if test "x`cat ${file}`" != "x`cat ${file}.$$.protect_from_automake.backup`" ; then lsscsi-0.31/autogen.sh-855- if test "x$spacer" = "xno" ; then ############################################## lsscsi-0.31/autogen.sh-881- lsscsi-0.31/autogen.sh:882: _aux_dir="`grep AC_CONFIG_AUX_DIR $CONFIGURE | grep -v '.*#.*AC_CONFIG_AUX_DIR' | tail -${TAIL_N}1 | sed 's/^[ ]*AC_CONFIG_AUX_DIR(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`" lsscsi-0.31/autogen.sh-883- if test ! -d "$_aux_dir" ; then ############################################## lsscsi-0.31/autogen.sh-913- # look for subdirs lsscsi-0.31/autogen.sh:914: _det_config_subdirs="`grep AC_CONFIG_SUBDIRS $_configure | grep -v '.*#.*AC_CONFIG_SUBDIRS' | sed 's/^[ ]*AC_CONFIG_SUBDIRS(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`" lsscsi-0.31/autogen.sh-915- CHECK_DIRS="" ############################################## lsscsi-0.31/autogen.sh-968- ##################### lsscsi-0.31/autogen.sh:969: _aux_dir="`grep AC_CONFIG_AUX_DIR $CONFIGURE | grep -v '.*#.*AC_CONFIG_AUX_DIR' | tail -${TAIL_N}1 | sed 's/^[ ]*AC_CONFIG_AUX_DIR(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`" lsscsi-0.31/autogen.sh-970- if test ! -d "$_aux_dir" ; then ############################################## lsscsi-0.31/autogen.sh-979- CONFIG_SUBDIRS="" lsscsi-0.31/autogen.sh:980: _det_config_subdirs="`grep AC_CONFIG_SUBDIRS $CONFIGURE | grep -v '.*#.*AC_CONFIG_SUBDIRS' | sed 's/^[ ]*AC_CONFIG_SUBDIRS(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`" lsscsi-0.31/autogen.sh-981- for dir in $_det_config_subdirs ; do ############################################## lsscsi-0.31/autogen.sh-995- _marker_found_message=${_marker_found_message_intro}${marker}${_marker_found_message_mid} lsscsi-0.31/autogen.sh:996: _marker_found="`grep 'AM_INIT_AUTOMAKE.*'${marker} $CONFIGURE`" lsscsi-0.31/autogen.sh-997- if [ ! "x$_marker_found" = "x" ] ; then lsscsi-0.31/autogen.sh:998: $VERBOSE_ECHO "${_marker_found_message}`basename \"$CONFIGURE\"`" lsscsi-0.31/autogen.sh-999- break lsscsi-0.31/autogen.sh-1000- fi lsscsi-0.31/autogen.sh:1001: if test -f "`dirname \"$CONFIGURE\"/Makefile.am`" ; then lsscsi-0.31/autogen.sh:1002: _marker_found="`grep 'AUTOMAKE_OPTIONS.*'${marker} Makefile.am`" lsscsi-0.31/autogen.sh-1003- if [ ! "x$_marker_found" = "x" ] ; then ############################################## lsscsi-0.31/autogen.sh-1024- $ECHO lsscsi-0.31/autogen.sh:1025: $ECHO "Considered adding 'foreign' to AM_INIT_AUTOMAKE in `basename \"$CONFIGURE\"`" lsscsi-0.31/autogen.sh:1026: if test -f "`dirname \"$CONFIGURE\"/Makefile.am`" ; then lsscsi-0.31/autogen.sh-1027- $ECHO "or to AUTOMAKE_OPTIONS in your top-level Makefile.am file." ############################################## lsscsi-0.31/autogen.sh-1110- lsscsi-0.31/autogen.sh:1111: __cmd_version=`${__cmd} --version | head -n 1 | sed -e 's/^[^0-9]\+//' -e 's/ .*//'` lsscsi-0.31/autogen.sh-1112- $VERBOSE_ECHO "Found ${__cmd} ${__cmd_version}" ############################################## lsscsi-0.31/autogen.sh-1149- $VERBOSE_ECHO "Searching for $feature in $CONFIGURE" lsscsi-0.31/autogen.sh:1150: found="`grep \"^$feature.*\" $CONFIGURE`" lsscsi-0.31/autogen.sh-1151- if [ ! "x$found" = "x" ] ; then ############################################## lsscsi-0.31/autogen.sh-1169- $VERBOSE_ECHO "$AUTORECONF $SEARCH_DIRS $AUTORECONF_OPTIONS" lsscsi-0.31/autogen.sh:1170: autoreconf_output="`$AUTORECONF $SEARCH_DIRS $AUTORECONF_OPTIONS 2>&1`" lsscsi-0.31/autogen.sh-1171- ret=$? ############################################## lsscsi-0.31/autogen.sh-1175- if [ "x$HAVE_ALT_LIBTOOLIZE" = "xyes" ] ; then lsscsi-0.31/autogen.sh:1176: if [ ! "x`echo \"$autoreconf_output\" | grep libtoolize | grep \"No such file or directory\"`" = "x" ] ; then lsscsi-0.31/autogen.sh-1177- $ECHO ############################################## lsscsi-0.31/autogen.sh-1234- if test -f "$LIBTOOL_M4" ; then lsscsi-0.31/autogen.sh:1235: found_libtool="`$ECHO $_autoconf_output | grep AC_PROG_LIBTOOL`" lsscsi-0.31/autogen.sh-1236- if test ! "x$found_libtool" = "x" ; then ############################################## lsscsi-0.31/autogen.sh-1279- $VERBOSE_ECHO "$ACLOCAL $SEARCH_DIRS $ACLOCAL_OPTIONS" lsscsi-0.31/autogen.sh:1280: aclocal_output="`$ACLOCAL $SEARCH_DIRS $ACLOCAL_OPTIONS 2>&1`" lsscsi-0.31/autogen.sh-1281- ret=$? ############################################## lsscsi-0.31/autogen.sh-1290- $VERBOSE_ECHO "$LIBTOOLIZE $LIBTOOLIZE_OPTIONS" lsscsi-0.31/autogen.sh:1291: libtoolize_output="`$LIBTOOLIZE $LIBTOOLIZE_OPTIONS 2>&1`" lsscsi-0.31/autogen.sh-1292- ret=$? ############################################## lsscsi-0.31/autogen.sh-1298- $VERBOSE_ECHO "$LIBTOOLIZE $ALT_LIBTOOLIZE_OPTIONS" lsscsi-0.31/autogen.sh:1299: libtoolize_output="`$LIBTOOLIZE $ALT_LIBTOOLIZE_OPTIONS 2>&1`" lsscsi-0.31/autogen.sh-1300- ret=$? ############################################## lsscsi-0.31/autogen.sh-1311- $VERBOSE_ECHO "$ACLOCAL $SEARCH_DIRS $ACLOCAL_OPTIONS" lsscsi-0.31/autogen.sh:1312: aclocal_output="`$ACLOCAL $SEARCH_DIRS $ACLOCAL_OPTIONS 2>&1`" lsscsi-0.31/autogen.sh-1313- ret=$? ############################################## lsscsi-0.31/autogen.sh-1340- $VERBOSE_ECHO "$AUTOCONF $AUTOCONF_OPTIONS" lsscsi-0.31/autogen.sh:1341: autoconf_output="`$AUTOCONF $AUTOCONF_OPTIONS 2>&1`" lsscsi-0.31/autogen.sh-1342- ret=$? ############################################## lsscsi-0.31/autogen.sh-1351- macros_to_search="" lsscsi-0.31/autogen.sh:1352: ac_major="`echo ${AUTOCONF_VERSION}. | cut -d. -f1 | sed 's/[^0-9]//g'`" lsscsi-0.31/autogen.sh:1353: ac_minor="`echo ${AUTOCONF_VERSION}. | cut -d. -f2 | sed 's/[^0-9]//g'`" lsscsi-0.31/autogen.sh-1354- ############################################## lsscsi-0.31/autogen.sh-1369- $VERBOSE_ECHO "Searching for $feature in $CONFIGURE" lsscsi-0.31/autogen.sh:1370: found="`grep \"^$feature.*\" $CONFIGURE`" lsscsi-0.31/autogen.sh-1371- if [ ! "x$found" = "x" ] ; then ############################################## lsscsi-0.31/autogen.sh-1382- $ECHO lsscsi-0.31/autogen.sh:1383: $ECHO "The `basename \"$CONFIGURE\"` file was scanned in order to determine if any" lsscsi-0.31/autogen.sh-1384- $ECHO "unsupported macros are used that exceed the minimum version" ############################################## lsscsi-0.31/autogen.sh-1398- $VERBOSE_ECHO "$AUTOCONF" lsscsi-0.31/autogen.sh:1399: autoconf_output="`$AUTOCONF 2>&1`" lsscsi-0.31/autogen.sh-1400- ret=$? ############################################## lsscsi-0.31/autogen.sh-1426- $ECHO "reviewing the minimum GNU Autotools version settings contained in" lsscsi-0.31/autogen.sh:1427: $ECHO "this script along with the macros being used in your `basename \"$CONFIGURE\"` file." lsscsi-0.31/autogen.sh-1428- fi ############################################## lsscsi-0.31/autogen.sh-1439- $VERBOSE_ECHO "Searching for $feature in $CONFIGURE" lsscsi-0.31/autogen.sh:1440: found="`grep \"^$feature.*\" $CONFIGURE`" lsscsi-0.31/autogen.sh-1441- if [ ! "x$found" = "x" ] ; then ############################################## lsscsi-0.31/autogen.sh-1447- $VERBOSE_ECHO "$AUTOHEADER $AUTOHEADER_OPTIONS" lsscsi-0.31/autogen.sh:1448: autoheader_output="`$AUTOHEADER $AUTOHEADER_OPTIONS 2>&1`" lsscsi-0.31/autogen.sh-1449- ret=$? ############################################## lsscsi-0.31/autogen.sh-1459- $VERBOSE_ECHO "Searching for $feature in $CONFIGURE" lsscsi-0.31/autogen.sh:1460: found="`grep \"^$feature.*\" $CONFIGURE`" lsscsi-0.31/autogen.sh-1461- if [ ! "x$found" = "x" ] ; then ############################################## lsscsi-0.31/autogen.sh-1468- $VERBOSE_ECHO "$AUTOMAKE $AUTOMAKE_OPTIONS" lsscsi-0.31/autogen.sh:1469: automake_output="`$AUTOMAKE $AUTOMAKE_OPTIONS 2>&1`" lsscsi-0.31/autogen.sh-1470- ret=$? ############################################## lsscsi-0.31/autogen.sh-1480- # retry without the -f lsscsi-0.31/autogen.sh:1481: automake_output="`$AUTOMAKE $ALT_AUTOMAKE_OPTIONS 2>&1`" lsscsi-0.31/autogen.sh-1482- ret=$? ############################################## lsscsi-0.31/autogen.sh-1549-config_ac="`locate_configure_template`" lsscsi-0.31/autogen.sh:1550:config="`echo $config_ac | sed 's/\.ac$//' | sed 's/\.in$//'`" lsscsi-0.31/autogen.sh-1551-if [ "x$config" = "x" ] ; then