===========================================================
.___ __ __
_________________ __ __ __| _/|__|/ |_
/ ___\_` __ \__ \ | | \/ __ | | \\_ __\
/ /_/ > | \// __ \| | / /_/ | | || |
\___ /|__| (____ /____/\____ | |__||__|
/_____/ \/ \/
grep rough audit - static analysis tool
v2.8 written by @Wireghoul
=================================[justanotherhacker.com]===
pidgin-extprefs-0.7/src/Makefile.in-43-CONFIG_CLEAN_FILES =
pidgin-extprefs-0.7/src/Makefile.in:44:am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
pidgin-extprefs-0.7/src/Makefile.in-45-am__vpath_adj = case $$p in \
pidgin-extprefs-0.7/src/Makefile.in:46: $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
pidgin-extprefs-0.7/src/Makefile.in-47- *) f=$$p;; \
pidgin-extprefs-0.7/src/Makefile.in-48- esac;
pidgin-extprefs-0.7/src/Makefile.in:49:am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
pidgin-extprefs-0.7/src/Makefile.in-50-am__installdirs = "$(DESTDIR)$(plugindir)"
##############################################
pidgin-extprefs-0.7/src/Makefile.in-264- @list='$(plugin_LTLIBRARIES)'; for p in $$list; do \
pidgin-extprefs-0.7/src/Makefile.in:265: dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
pidgin-extprefs-0.7/src/Makefile.in-266- test "$$dir" != "$$p" || dir=.; \
##############################################
pidgin-extprefs-0.7/src/Makefile.in-288-.c.obj:
pidgin-extprefs-0.7/src/Makefile.in:289:@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
pidgin-extprefs-0.7/src/Makefile.in-290-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
##############################################
pidgin-extprefs-0.7/src/Makefile.in-292-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
pidgin-extprefs-0.7/src/Makefile.in:293:@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
pidgin-extprefs-0.7/src/Makefile.in-294-
##############################################
pidgin-extprefs-0.7/src/Makefile.in-348-GTAGS:
pidgin-extprefs-0.7/src/Makefile.in:349: here=`$(am__cd) $(top_builddir) && pwd` \
pidgin-extprefs-0.7/src/Makefile.in-350- && cd $(top_srcdir) \
##############################################
pidgin-extprefs-0.7/src/Makefile.in-356-distdir: $(DISTFILES)
pidgin-extprefs-0.7/src/Makefile.in:357: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
pidgin-extprefs-0.7/src/Makefile.in:358: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
pidgin-extprefs-0.7/src/Makefile.in-359- list='$(DISTFILES)'; \
##############################################
pidgin-extprefs-0.7/src/Makefile.in-370- if test -d $$d/$$file; then \
pidgin-extprefs-0.7/src/Makefile.in:371: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
pidgin-extprefs-0.7/src/Makefile.in-372- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
##############################################
pidgin-extprefs-0.7/depcomp-69- sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
pidgin-extprefs-0.7/depcomp:70:tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
pidgin-extprefs-0.7/depcomp-71-
##############################################
pidgin-extprefs-0.7/depcomp-217- # Version 6 uses the directory in both cases.
pidgin-extprefs-0.7/depcomp:218: stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
pidgin-extprefs-0.7/depcomp-219- tmpdepfile="$stripped.u"
##############################################
pidgin-extprefs-0.7/depcomp-228- else
pidgin-extprefs-0.7/depcomp:229: stripped=`echo "$stripped" | sed 's,^.*/,,'`
pidgin-extprefs-0.7/depcomp-230- tmpdepfile="$stripped.u"
##############################################
pidgin-extprefs-0.7/depcomp-242- # Do two passes, one to just change these to
pidgin-extprefs-0.7/depcomp:243: # `$object: dependent.h' and one to simply `dependent.h:'.
pidgin-extprefs-0.7/depcomp-244- sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
##############################################
pidgin-extprefs-0.7/depcomp-283- # Do two passes, one to just change these to
pidgin-extprefs-0.7/depcomp:284: # `$object: dependent.h' and one to simply `dependent.h:'.
pidgin-extprefs-0.7/depcomp-285- sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
##############################################
pidgin-extprefs-0.7/depcomp-299- # Much of this is similar to the tru64 case; see comments there.
pidgin-extprefs-0.7/depcomp:300: dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
pidgin-extprefs-0.7/depcomp-301- test "x$dir" = "x$object" && dir=
pidgin-extprefs-0.7/depcomp:302: base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
pidgin-extprefs-0.7/depcomp-303- if test "$libtool" = yes; then
##############################################
pidgin-extprefs-0.7/depcomp-338- # Subdirectories are respected.
pidgin-extprefs-0.7/depcomp:339: dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
pidgin-extprefs-0.7/depcomp-340- test "x$dir" = "x$object" && dir=
pidgin-extprefs-0.7/depcomp:341: base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
pidgin-extprefs-0.7/depcomp-342-
##############################################
pidgin-extprefs-0.7/depcomp-477- done
pidgin-extprefs-0.7/depcomp:478: obj_suffix="`echo $object | sed 's/^.*\././'`"
pidgin-extprefs-0.7/depcomp-479- touch "$tmpdepfile"
##############################################
pidgin-extprefs-0.7/aclocal.m4-78- if test x"$no_glib" = x ; then
pidgin-extprefs-0.7/aclocal.m4:79: GLIB_GENMARSHAL=`$PKG_CONFIG --variable=glib_genmarshal glib-2.0`
pidgin-extprefs-0.7/aclocal.m4:80: GOBJECT_QUERY=`$PKG_CONFIG --variable=gobject_query glib-2.0`
pidgin-extprefs-0.7/aclocal.m4:81: GLIB_MKENUMS=`$PKG_CONFIG --variable=glib_mkenums glib-2.0`
pidgin-extprefs-0.7/aclocal.m4-82-
pidgin-extprefs-0.7/aclocal.m4:83: GLIB_CFLAGS=`$PKG_CONFIG --cflags $pkg_config_args`
pidgin-extprefs-0.7/aclocal.m4:84: GLIB_LIBS=`$PKG_CONFIG --libs $pkg_config_args`
pidgin-extprefs-0.7/aclocal.m4-85- glib_config_major_version=`$PKG_CONFIG --modversion glib-2.0 | \
##############################################
pidgin-extprefs-0.7/aclocal.m4-285- if test x"$no_gtk" = x ; then
pidgin-extprefs-0.7/aclocal.m4:286: GTK_CFLAGS=`$PKG_CONFIG $pkg_config_args --cflags`
pidgin-extprefs-0.7/aclocal.m4:287: GTK_LIBS=`$PKG_CONFIG $pkg_config_args --libs`
pidgin-extprefs-0.7/aclocal.m4-288- gtk_config_major_version=`$PKG_CONFIG --modversion gtk+-2.0 | \
##############################################
pidgin-extprefs-0.7/aclocal.m4-660-gentoo_lt_version="1.5.22"
pidgin-extprefs-0.7/aclocal.m4:661:gentoo_ltmain_version=`sed -n '/^[[ ]]*VERSION=/{s/^[[ ]]*VERSION=//;p;q;}' "$ltmain"`
pidgin-extprefs-0.7/aclocal.m4-662-if test "x$gentoo_lt_version" != "x$gentoo_ltmain_version" ; then
##############################################
pidgin-extprefs-0.7/aclocal.m4-710-done
pidgin-extprefs-0.7/aclocal.m4:711:cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
pidgin-extprefs-0.7/aclocal.m4-712-])
##############################################
pidgin-extprefs-0.7/aclocal.m4-782- # Remove one level of quotation (which was required for Make).
pidgin-extprefs-0.7/aclocal.m4:783: ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
pidgin-extprefs-0.7/aclocal.m4-784- ;;
##############################################
pidgin-extprefs-0.7/aclocal.m4-793- :
pidgin-extprefs-0.7/aclocal.m4:794:elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
pidgin-extprefs-0.7/aclocal.m4-795- # Yippee, $echo works!
##############################################
pidgin-extprefs-0.7/aclocal.m4-819- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
pidgin-extprefs-0.7/aclocal.m4:820: if (echo_test_string=`eval $cmd`) 2>/dev/null &&
pidgin-extprefs-0.7/aclocal.m4:821: echo_test_string=`eval $cmd` &&
pidgin-extprefs-0.7/aclocal.m4-822- (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
##############################################
pidgin-extprefs-0.7/aclocal.m4-828-
pidgin-extprefs-0.7/aclocal.m4:829:if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
pidgin-extprefs-0.7/aclocal.m4:830: echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
pidgin-extprefs-0.7/aclocal.m4-831- test "X$echo_testing_string" = "X$echo_test_string"; then
##############################################
pidgin-extprefs-0.7/aclocal.m4-843- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
pidgin-extprefs-0.7/aclocal.m4:844: test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
pidgin-extprefs-0.7/aclocal.m4:845: echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
pidgin-extprefs-0.7/aclocal.m4-846- test "X$echo_testing_string" = "X$echo_test_string"; then
##############################################
pidgin-extprefs-0.7/aclocal.m4-855- if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
pidgin-extprefs-0.7/aclocal.m4:856: echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
pidgin-extprefs-0.7/aclocal.m4-857- test "X$echo_testing_string" = "X$echo_test_string"; then
##############################################
pidgin-extprefs-0.7/aclocal.m4-870- echo='printf %s\n'
pidgin-extprefs-0.7/aclocal.m4:871: if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
pidgin-extprefs-0.7/aclocal.m4:872: echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
pidgin-extprefs-0.7/aclocal.m4-873- test "X$echo_testing_string" = "X$echo_test_string"; then
##############################################
pidgin-extprefs-0.7/aclocal.m4-875- :
pidgin-extprefs-0.7/aclocal.m4:876: elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
pidgin-extprefs-0.7/aclocal.m4-877- test "X$echo_testing_string" = 'X\t' &&
pidgin-extprefs-0.7/aclocal.m4:878: echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
pidgin-extprefs-0.7/aclocal.m4-879- test "X$echo_testing_string" = "X$echo_test_string"; then
##############################################
pidgin-extprefs-0.7/aclocal.m4-884- echo="$CONFIG_SHELL [$]0 --fallback-echo"
pidgin-extprefs-0.7/aclocal.m4:885: elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
pidgin-extprefs-0.7/aclocal.m4-886- test "X$echo_testing_string" = 'X\t' &&
pidgin-extprefs-0.7/aclocal.m4:887: echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
pidgin-extprefs-0.7/aclocal.m4-888- test "X$echo_testing_string" = "X$echo_test_string"; then
##############################################
pidgin-extprefs-0.7/aclocal.m4-894- for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
pidgin-extprefs-0.7/aclocal.m4:895: if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
pidgin-extprefs-0.7/aclocal.m4-896- then
##############################################
pidgin-extprefs-0.7/aclocal.m4-902- if test "$prev" != 'sed 50q "[$]0"'; then
pidgin-extprefs-0.7/aclocal.m4:903: echo_test_string=`eval $prev`
pidgin-extprefs-0.7/aclocal.m4-904- export echo_test_string
##############################################
pidgin-extprefs-0.7/aclocal.m4-941- if AC_TRY_EVAL(ac_compile); then
pidgin-extprefs-0.7/aclocal.m4:942: case `/usr/bin/file conftest.$ac_objext` in
pidgin-extprefs-0.7/aclocal.m4-943- *ELF-32*)
##############################################
pidgin-extprefs-0.7/aclocal.m4-957- if test "$lt_cv_prog_gnu_ld" = yes; then
pidgin-extprefs-0.7/aclocal.m4:958: case `/usr/bin/file conftest.$ac_objext` in
pidgin-extprefs-0.7/aclocal.m4-959- *32-bit*)
##############################################
pidgin-extprefs-0.7/aclocal.m4-969- else
pidgin-extprefs-0.7/aclocal.m4:970: case `/usr/bin/file conftest.$ac_objext` in
pidgin-extprefs-0.7/aclocal.m4-971- *32-bit*)
##############################################
pidgin-extprefs-0.7/aclocal.m4-1204- # And add a safety zone
pidgin-extprefs-0.7/aclocal.m4:1205: lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
pidgin-extprefs-0.7/aclocal.m4:1206: lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
pidgin-extprefs-0.7/aclocal.m4-1207- ;;
##############################################
pidgin-extprefs-0.7/aclocal.m4-1232- if test -n "$kargmax"; then
pidgin-extprefs-0.7/aclocal.m4:1233: lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'`
pidgin-extprefs-0.7/aclocal.m4-1234- else
##############################################
pidgin-extprefs-0.7/aclocal.m4-1242- SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
pidgin-extprefs-0.7/aclocal.m4:1243: while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
pidgin-extprefs-0.7/aclocal.m4-1244- = "XX$teststring") >/dev/null 2>&1 &&
pidgin-extprefs-0.7/aclocal.m4:1245: new_result=`expr "X$teststring" : ".*" 2>&1` &&
pidgin-extprefs-0.7/aclocal.m4-1246- lt_cv_sys_max_cmd_len=$new_result &&
##############################################
pidgin-extprefs-0.7/aclocal.m4-1248- do
pidgin-extprefs-0.7/aclocal.m4:1249: i=`expr $i + 1`
pidgin-extprefs-0.7/aclocal.m4-1250- teststring=$teststring$teststring
##############################################
pidgin-extprefs-0.7/aclocal.m4-1255- # It appears as though 1/2 is a usable value.
pidgin-extprefs-0.7/aclocal.m4:1256: lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
pidgin-extprefs-0.7/aclocal.m4-1257- ;;
##############################################
pidgin-extprefs-0.7/aclocal.m4-1547- if test "$hard_links" = no; then
pidgin-extprefs-0.7/aclocal.m4:1548: AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
pidgin-extprefs-0.7/aclocal.m4-1549- need_locks=warn
##############################################
pidgin-extprefs-0.7/aclocal.m4-1662-if test "$GCC" = yes; then
pidgin-extprefs-0.7/aclocal.m4:1663: sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
pidgin-extprefs-0.7/aclocal.m4-1664- if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
##############################################
pidgin-extprefs-0.7/aclocal.m4-1668- # okay in the real world where ";" in dirpaths is itself problematic.
pidgin-extprefs-0.7/aclocal.m4:1669: sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
pidgin-extprefs-0.7/aclocal.m4-1670- else
pidgin-extprefs-0.7/aclocal.m4:1671: sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
pidgin-extprefs-0.7/aclocal.m4-1672- fi
##############################################
pidgin-extprefs-0.7/aclocal.m4-1739- # Create ${libname}_ixlibrary.a entries in /sys/libs.
pidgin-extprefs-0.7/aclocal.m4:1740: finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
pidgin-extprefs-0.7/aclocal.m4-1741- ;;
##############################################
pidgin-extprefs-0.7/aclocal.m4-1772- # DLL is installed to $(libdir)/../bin by postinstall_cmds
pidgin-extprefs-0.7/aclocal.m4:1773: postinstall_cmds='base_file=`basename \${file}`~
pidgin-extprefs-0.7/aclocal.m4:1774: dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
pidgin-extprefs-0.7/aclocal.m4:1775: dldir=$destdir/`dirname \$dlpath`~
pidgin-extprefs-0.7/aclocal.m4-1776- test -d \$dldir || mkdir -p \$dldir~
##############################################
pidgin-extprefs-0.7/aclocal.m4-1778- chmod a+x \$dldir/$dlname'
pidgin-extprefs-0.7/aclocal.m4:1779: postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
pidgin-extprefs-0.7/aclocal.m4-1780- dlpath=$dir/\$dldll~
##############################################
pidgin-extprefs-0.7/aclocal.m4-1786- # Cygwin DLLs use 'cyg' prefix rather than 'lib'
pidgin-extprefs-0.7/aclocal.m4:1787: soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
pidgin-extprefs-0.7/aclocal.m4-1788- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
##############################################
pidgin-extprefs-0.7/aclocal.m4-1791- # MinGW DLLs use traditional 'lib' prefix
pidgin-extprefs-0.7/aclocal.m4:1792: soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
pidgin-extprefs-0.7/aclocal.m4:1793: sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
pidgin-extprefs-0.7/aclocal.m4-1794- if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then
##############################################
pidgin-extprefs-0.7/aclocal.m4-1800- # which wouldn't understand a cygwinified path. Ahh.
pidgin-extprefs-0.7/aclocal.m4:1801: sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
pidgin-extprefs-0.7/aclocal.m4-1802- else
pidgin-extprefs-0.7/aclocal.m4:1803: sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
pidgin-extprefs-0.7/aclocal.m4-1804- fi
##############################################
pidgin-extprefs-0.7/aclocal.m4-1807- # pw32 DLLs use 'pw' prefix rather than 'lib'
pidgin-extprefs-0.7/aclocal.m4:1808: library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
pidgin-extprefs-0.7/aclocal.m4-1809- ;;
##############################################
pidgin-extprefs-0.7/aclocal.m4-1816- supports_anon_versioning=no
pidgin-extprefs-0.7/aclocal.m4:1817: case `$LD -v 2>/dev/null` in
pidgin-extprefs-0.7/aclocal.m4-1818- *\ [01].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
##############################################
pidgin-extprefs-0.7/aclocal.m4-1837- *)
pidgin-extprefs-0.7/aclocal.m4:1838: library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
pidgin-extprefs-0.7/aclocal.m4-1839- ;;
##############################################
pidgin-extprefs-0.7/aclocal.m4-1854- shlibpath_var=DYLD_LIBRARY_PATH
pidgin-extprefs-0.7/aclocal.m4:1855: shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
pidgin-extprefs-0.7/aclocal.m4-1856- # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
pidgin-extprefs-0.7/aclocal.m4-1857- if test "$GCC" = yes; then
pidgin-extprefs-0.7/aclocal.m4:1858: sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
pidgin-extprefs-0.7/aclocal.m4-1859- else
##############################################
pidgin-extprefs-0.7/aclocal.m4-2073- if test -f /etc/ld.so.conf; then
pidgin-extprefs-0.7/aclocal.m4:2074: lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
pidgin-extprefs-0.7/aclocal.m4-2075- sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
##############################################
pidgin-extprefs-0.7/aclocal.m4-2145- shlibpath_var=LD_LIBRARY_PATH
pidgin-extprefs-0.7/aclocal.m4:2146: if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
pidgin-extprefs-0.7/aclocal.m4-2147- case $host_os in
##############################################
pidgin-extprefs-0.7/aclocal.m4-2295- if test -z "$LTCC"; then
pidgin-extprefs-0.7/aclocal.m4:2296: eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
pidgin-extprefs-0.7/aclocal.m4-2297- if test -z "$LTCC"; then
##############################################
pidgin-extprefs-0.7/aclocal.m4-2299- else
pidgin-extprefs-0.7/aclocal.m4:2300: AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
pidgin-extprefs-0.7/aclocal.m4-2301- fi
##############################################
pidgin-extprefs-0.7/aclocal.m4-2303- if test -z "$LTCFLAGS"; then
pidgin-extprefs-0.7/aclocal.m4:2304: eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
pidgin-extprefs-0.7/aclocal.m4-2305- fi
##############################################
pidgin-extprefs-0.7/aclocal.m4-2308- # Note that this assumes the entire list is on one line.
pidgin-extprefs-0.7/aclocal.m4:2309: available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
pidgin-extprefs-0.7/aclocal.m4-2310-
##############################################
pidgin-extprefs-0.7/aclocal.m4-2314- # Check whether tagname contains only valid characters
pidgin-extprefs-0.7/aclocal.m4:2315: case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in
pidgin-extprefs-0.7/aclocal.m4-2316- "") ;;
##############################################
pidgin-extprefs-0.7/aclocal.m4-2569- "file_magic "*)
pidgin-extprefs-0.7/aclocal.m4:2570: file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
pidgin-extprefs-0.7/aclocal.m4-2571- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
##############################################
pidgin-extprefs-0.7/aclocal.m4-2641- # gcc leaves a trailing carriage return which upsets mingw
pidgin-extprefs-0.7/aclocal.m4:2642: ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
pidgin-extprefs-0.7/aclocal.m4-2643- *)
pidgin-extprefs-0.7/aclocal.m4:2644: ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
pidgin-extprefs-0.7/aclocal.m4-2645- esac
##############################################
pidgin-extprefs-0.7/aclocal.m4-2650- # Canonicalize the pathname of ld
pidgin-extprefs-0.7/aclocal.m4:2651: ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
pidgin-extprefs-0.7/aclocal.m4-2652- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
pidgin-extprefs-0.7/aclocal.m4:2653: ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
pidgin-extprefs-0.7/aclocal.m4-2654- done
##############################################
pidgin-extprefs-0.7/aclocal.m4-2681- # Break only if it was the GNU/non-GNU ld that we prefer.
pidgin-extprefs-0.7/aclocal.m4:2682: case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
pidgin-extprefs-0.7/aclocal.m4-2683- *GNU* | *'with BFD'*)
##############################################
pidgin-extprefs-0.7/aclocal.m4-2712-[# I'd rather use --version here, but apparently some GNU lds only accept -v.
pidgin-extprefs-0.7/aclocal.m4:2713:case `$LD -v 2>&1 </dev/null` in
pidgin-extprefs-0.7/aclocal.m4-2714-*GNU* | *'with BFD'*)
##############################################
pidgin-extprefs-0.7/aclocal.m4-2880-openbsd*)
pidgin-extprefs-0.7/aclocal.m4:2881: if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
pidgin-extprefs-0.7/aclocal.m4-2882- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
##############################################
pidgin-extprefs-0.7/aclocal.m4-2957- # Tru64's nm complains that /dev/null is an invalid object file
pidgin-extprefs-0.7/aclocal.m4:2958: case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
pidgin-extprefs-0.7/aclocal.m4-2959- */dev/null* | *'Invalid file or object type'*)
##############################################
pidgin-extprefs-0.7/aclocal.m4-2963- *)
pidgin-extprefs-0.7/aclocal.m4:2964: case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
pidgin-extprefs-0.7/aclocal.m4-2965- */dev/null*)
##############################################
pidgin-extprefs-0.7/aclocal.m4-3327- # ancient GNU ld didn't support --whole-archive et. al.
pidgin-extprefs-0.7/aclocal.m4:3328: if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
pidgin-extprefs-0.7/aclocal.m4-3329- grep 'no-whole-archive' > /dev/null; then
##############################################
pidgin-extprefs-0.7/aclocal.m4-3408- # below for broken collect2 doesn't work under 4.3+
pidgin-extprefs-0.7/aclocal.m4:3409: collect2name=`${CC} -print-prog-name=collect2`
pidgin-extprefs-0.7/aclocal.m4-3410- if test -f "$collect2name" && \
##############################################
pidgin-extprefs-0.7/aclocal.m4-3456-
pidgin-extprefs-0.7/aclocal.m4:3457: _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
pidgin-extprefs-0.7/aclocal.m4-3458- else
##############################################
pidgin-extprefs-0.7/aclocal.m4-3511- # is EXPORTS), use it as is; otherwise, prepend...
pidgin-extprefs-0.7/aclocal.m4:3512: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
pidgin-extprefs-0.7/aclocal.m4-3513- cp $export_symbols $output_objdir/$soname.def;
##############################################
pidgin-extprefs-0.7/aclocal.m4-3572- output_verbose_link_cmd='echo'
pidgin-extprefs-0.7/aclocal.m4:3573: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
pidgin-extprefs-0.7/aclocal.m4-3574- _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
##############################################
pidgin-extprefs-0.7/aclocal.m4-3640- # dependencies.
pidgin-extprefs-0.7/aclocal.m4:3641: output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[[-]]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
pidgin-extprefs-0.7/aclocal.m4-3642- ;;
##############################################
pidgin-extprefs-0.7/aclocal.m4-3704- # dependencies.
pidgin-extprefs-0.7/aclocal.m4:3705: output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
pidgin-extprefs-0.7/aclocal.m4-3706- ;;
##############################################
pidgin-extprefs-0.7/aclocal.m4-3739- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
pidgin-extprefs-0.7/aclocal.m4:3740: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
pidgin-extprefs-0.7/aclocal.m4:3741: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
pidgin-extprefs-0.7/aclocal.m4-3742- ;;
##############################################
pidgin-extprefs-0.7/aclocal.m4-3746- # SGI C++
pidgin-extprefs-0.7/aclocal.m4:3747: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
pidgin-extprefs-0.7/aclocal.m4-3748-
##############################################
pidgin-extprefs-0.7/aclocal.m4-3757- if test "$with_gnu_ld" = no; then
pidgin-extprefs-0.7/aclocal.m4:3758: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
pidgin-extprefs-0.7/aclocal.m4-3759- else
pidgin-extprefs-0.7/aclocal.m4:3760: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
pidgin-extprefs-0.7/aclocal.m4-3761- fi
##############################################
pidgin-extprefs-0.7/aclocal.m4-3776- # to its proper name (with version) after linking.
pidgin-extprefs-0.7/aclocal.m4:3777: _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
pidgin-extprefs-0.7/aclocal.m4:3778: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
pidgin-extprefs-0.7/aclocal.m4-3779- # Commands to make compiler produce verbose output that lists
##############################################
pidgin-extprefs-0.7/aclocal.m4-3786- # dependencies.
pidgin-extprefs-0.7/aclocal.m4:3787: output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
pidgin-extprefs-0.7/aclocal.m4-3788-
##############################################
pidgin-extprefs-0.7/aclocal.m4-3801- # earlier do not add the objects themselves.
pidgin-extprefs-0.7/aclocal.m4:3802: case `$CC -V 2>&1` in
pidgin-extprefs-0.7/aclocal.m4-3803- *"Version 7."*)
##############################################
pidgin-extprefs-0.7/aclocal.m4-3827- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
pidgin-extprefs-0.7/aclocal.m4:3828: _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
pidgin-extprefs-0.7/aclocal.m4-3829- ;;
##############################################
pidgin-extprefs-0.7/aclocal.m4-3846- # dependencies.
pidgin-extprefs-0.7/aclocal.m4:3847: output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
pidgin-extprefs-0.7/aclocal.m4-3848- ;;
##############################################
pidgin-extprefs-0.7/aclocal.m4-3890- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
pidgin-extprefs-0.7/aclocal.m4:3891: if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
pidgin-extprefs-0.7/aclocal.m4-3892- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
##############################################
pidgin-extprefs-0.7/aclocal.m4-3905- # to its proper name (with version) after linking.
pidgin-extprefs-0.7/aclocal.m4:3906: _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
pidgin-extprefs-0.7/aclocal.m4-3907-
##############################################
pidgin-extprefs-0.7/aclocal.m4-3922- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
pidgin-extprefs-0.7/aclocal.m4:3923: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
pidgin-extprefs-0.7/aclocal.m4-3924-
##############################################
pidgin-extprefs-0.7/aclocal.m4-3935- # dependencies.
pidgin-extprefs-0.7/aclocal.m4:3936: output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
pidgin-extprefs-0.7/aclocal.m4-3937- ;;
##############################################
pidgin-extprefs-0.7/aclocal.m4-3940- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
pidgin-extprefs-0.7/aclocal.m4:3941: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
pidgin-extprefs-0.7/aclocal.m4-3942-
##############################################
pidgin-extprefs-0.7/aclocal.m4-3965- # to its proper name (with version) after linking.
pidgin-extprefs-0.7/aclocal.m4:3966: _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
pidgin-extprefs-0.7/aclocal.m4-3967-
##############################################
pidgin-extprefs-0.7/aclocal.m4-3981- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
pidgin-extprefs-0.7/aclocal.m4:3982: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
pidgin-extprefs-0.7/aclocal.m4:3983: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
pidgin-extprefs-0.7/aclocal.m4-3984- echo "-hidden">> $lib.exp~
pidgin-extprefs-0.7/aclocal.m4:3985: $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~
pidgin-extprefs-0.7/aclocal.m4-3986- $rm $lib.exp'
##############################################
pidgin-extprefs-0.7/aclocal.m4-3998- # dependencies.
pidgin-extprefs-0.7/aclocal.m4:3999: output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
pidgin-extprefs-0.7/aclocal.m4-4000- ;;
##############################################
pidgin-extprefs-0.7/aclocal.m4-4003- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
pidgin-extprefs-0.7/aclocal.m4:4004: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
pidgin-extprefs-0.7/aclocal.m4-4005-
##############################################
pidgin-extprefs-0.7/aclocal.m4-4065- # Supported since Solaris 2.6 (maybe 2.5.1?)
pidgin-extprefs-0.7/aclocal.m4:4066: _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract'
pidgin-extprefs-0.7/aclocal.m4-4067- ;;
##############################################
pidgin-extprefs-0.7/aclocal.m4-4153- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
pidgin-extprefs-0.7/aclocal.m4:4154: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
pidgin-extprefs-0.7/aclocal.m4-4155- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
##############################################
pidgin-extprefs-0.7/aclocal.m4-4276- # eval without this substitution.
pidgin-extprefs-0.7/aclocal.m4:4277: output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
pidgin-extprefs-0.7/aclocal.m4-4278-
pidgin-extprefs-0.7/aclocal.m4:4279: for p in `eval $output_verbose_link_cmd`; do
pidgin-extprefs-0.7/aclocal.m4-4280- case $p in
##############################################
pidgin-extprefs-0.7/aclocal.m4-4662- # Double-quote double-evaled strings.
pidgin-extprefs-0.7/aclocal.m4:4663: eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
pidgin-extprefs-0.7/aclocal.m4-4664- ;;
pidgin-extprefs-0.7/aclocal.m4-4665- *)
pidgin-extprefs-0.7/aclocal.m4:4666: eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
pidgin-extprefs-0.7/aclocal.m4-4667- ;;
##############################################
pidgin-extprefs-0.7/aclocal.m4-4672- *'\[$]0 --fallback-echo"')
pidgin-extprefs-0.7/aclocal.m4:4673: lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'`
pidgin-extprefs-0.7/aclocal.m4-4674- ;;
##############################################
pidgin-extprefs-0.7/aclocal.m4-4687-
pidgin-extprefs-0.7/aclocal.m4:4688:# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
pidgin-extprefs-0.7/aclocal.m4-4689-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
##############################################
pidgin-extprefs-0.7/aclocal.m4-5069- # libtool script then.
pidgin-extprefs-0.7/aclocal.m4:5070: ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
pidgin-extprefs-0.7/aclocal.m4-5071- if test -f "$ltmain_in"; then
##############################################
pidgin-extprefs-0.7/aclocal.m4-5174-# If we're using GNU nm, then use its standard symbol codes.
pidgin-extprefs-0.7/aclocal.m4:5175:case `$NM -V 2>&1` in
pidgin-extprefs-0.7/aclocal.m4-5176-*GNU* | *'with BFD'*)
##############################################
pidgin-extprefs-0.7/aclocal.m4-5207- nlist=conftest.nm
pidgin-extprefs-0.7/aclocal.m4:5208: if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
pidgin-extprefs-0.7/aclocal.m4-5209- # Try sorting and uniquifying the output.
##############################################
pidgin-extprefs-0.7/aclocal.m4-5925- supports_anon_versioning=no
pidgin-extprefs-0.7/aclocal.m4:5926: case `$LD -v 2>/dev/null` in
pidgin-extprefs-0.7/aclocal.m4-5927- *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
##############################################
pidgin-extprefs-0.7/aclocal.m4-5989- # is EXPORTS), use it as is; otherwise, prepend...
pidgin-extprefs-0.7/aclocal.m4:5990: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
pidgin-extprefs-0.7/aclocal.m4-5991- cp $export_symbols $output_objdir/$soname.def;
##############################################
pidgin-extprefs-0.7/aclocal.m4-6012- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
pidgin-extprefs-0.7/aclocal.m4:6013: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
pidgin-extprefs-0.7/aclocal.m4:6014: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
pidgin-extprefs-0.7/aclocal.m4-6015- ;;
##############################################
pidgin-extprefs-0.7/aclocal.m4-6021- pgcc*) # Portland Group C compiler
pidgin-extprefs-0.7/aclocal.m4:6022: _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
pidgin-extprefs-0.7/aclocal.m4-6023- tmp_addflag=' $pic_flag'
##############################################
pidgin-extprefs-0.7/aclocal.m4-6025- pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
pidgin-extprefs-0.7/aclocal.m4:6026: _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
pidgin-extprefs-0.7/aclocal.m4-6027- tmp_addflag=' $pic_flag -Mnomain' ;;
##############################################
pidgin-extprefs-0.7/aclocal.m4-6079- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
pidgin-extprefs-0.7/aclocal.m4:6080: case `$LD -v 2>&1` in
pidgin-extprefs-0.7/aclocal.m4-6081- *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
##############################################
pidgin-extprefs-0.7/aclocal.m4-6095- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
pidgin-extprefs-0.7/aclocal.m4:6096: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
pidgin-extprefs-0.7/aclocal.m4-6097- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
##############################################
pidgin-extprefs-0.7/aclocal.m4-6194- # below for broken collect2 doesn't work under 4.3+
pidgin-extprefs-0.7/aclocal.m4:6195: collect2name=`${CC} -print-prog-name=collect2`
pidgin-extprefs-0.7/aclocal.m4-6196- if test -f "$collect2name" && \
##############################################
pidgin-extprefs-0.7/aclocal.m4-6241- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
pidgin-extprefs-0.7/aclocal.m4:6242: _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
pidgin-extprefs-0.7/aclocal.m4-6243- else
##############################################
pidgin-extprefs-0.7/aclocal.m4-6288- # FIXME: Setting linknames here is a bad hack.
pidgin-extprefs-0.7/aclocal.m4:6289: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
pidgin-extprefs-0.7/aclocal.m4-6290- # The linker will automatically build a .lib file if we build a DLL.
##############################################
pidgin-extprefs-0.7/aclocal.m4-6293- _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs'
pidgin-extprefs-0.7/aclocal.m4:6294: _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
pidgin-extprefs-0.7/aclocal.m4-6295- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
##############################################
pidgin-extprefs-0.7/aclocal.m4-6334- output_verbose_link_cmd='echo'
pidgin-extprefs-0.7/aclocal.m4:6335: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
pidgin-extprefs-0.7/aclocal.m4-6336- _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
##############################################
pidgin-extprefs-0.7/aclocal.m4-6469- if test "$GCC" = yes; then
pidgin-extprefs-0.7/aclocal.m4:6470: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
pidgin-extprefs-0.7/aclocal.m4-6471- else
pidgin-extprefs-0.7/aclocal.m4:6472: _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
pidgin-extprefs-0.7/aclocal.m4-6473- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
##############################################
pidgin-extprefs-0.7/aclocal.m4-6501- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
pidgin-extprefs-0.7/aclocal.m4:6502: if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
pidgin-extprefs-0.7/aclocal.m4-6503- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
##############################################
pidgin-extprefs-0.7/aclocal.m4-6531- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
pidgin-extprefs-0.7/aclocal.m4:6532: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
pidgin-extprefs-0.7/aclocal.m4-6533- else
pidgin-extprefs-0.7/aclocal.m4-6534- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
pidgin-extprefs-0.7/aclocal.m4:6535: _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
pidgin-extprefs-0.7/aclocal.m4-6536- fi
##############################################
pidgin-extprefs-0.7/aclocal.m4-6543- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
pidgin-extprefs-0.7/aclocal.m4:6544: _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
pidgin-extprefs-0.7/aclocal.m4-6545- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
##############################################
pidgin-extprefs-0.7/aclocal.m4-6547- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
pidgin-extprefs-0.7/aclocal.m4:6548: _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
pidgin-extprefs-0.7/aclocal.m4:6549: _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
pidgin-extprefs-0.7/aclocal.m4:6550: $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
pidgin-extprefs-0.7/aclocal.m4-6551-
##############################################
pidgin-extprefs-0.7/aclocal.m4-6584- *)
pidgin-extprefs-0.7/aclocal.m4:6585: _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
pidgin-extprefs-0.7/aclocal.m4-6586- esac ;;
##############################################
pidgin-extprefs-0.7/aclocal.m4-6668- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
pidgin-extprefs-0.7/aclocal.m4:6669: _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
pidgin-extprefs-0.7/aclocal.m4-6670- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
##############################################
pidgin-extprefs-0.7/aclocal.m4-6733- _LT_AC_TAGVAR(allow_undefined_flag, $1)=
pidgin-extprefs-0.7/aclocal.m4:6734: if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
pidgin-extprefs-0.7/aclocal.m4-6735- then
##############################################
pidgin-extprefs-0.7/aclocal.m4-6869- test $lt_ac_count -gt 10 && break
pidgin-extprefs-0.7/aclocal.m4:6870: lt_ac_count=`expr $lt_ac_count + 1`
pidgin-extprefs-0.7/aclocal.m4-6871- if test $lt_ac_count -gt $lt_ac_max; then
##############################################
pidgin-extprefs-0.7/aclocal.m4-6954- PKG_CHECK_EXISTS([$3],
pidgin-extprefs-0.7/aclocal.m4:6955: [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`],
pidgin-extprefs-0.7/aclocal.m4-6956- [pkg_failed=yes])
##############################################
pidgin-extprefs-0.7/aclocal.m4-7002- if test $_pkg_short_errors_supported = yes; then
pidgin-extprefs-0.7/aclocal.m4:7003: $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "$2"`
pidgin-extprefs-0.7/aclocal.m4-7004- else
pidgin-extprefs-0.7/aclocal.m4:7005: $1[]_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"`
pidgin-extprefs-0.7/aclocal.m4-7006- fi
##############################################
pidgin-extprefs-0.7/aclocal.m4-7083-# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
pidgin-extprefs-0.7/aclocal.m4:7084:# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
pidgin-extprefs-0.7/aclocal.m4-7085-#
##############################################
pidgin-extprefs-0.7/aclocal.m4-7107-# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
pidgin-extprefs-0.7/aclocal.m4:7108:# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
pidgin-extprefs-0.7/aclocal.m4-7109-# and then we would define $MISSING as
##############################################
pidgin-extprefs-0.7/aclocal.m4-7123-# expand $ac_aux_dir to an absolute path
pidgin-extprefs-0.7/aclocal.m4:7124:am_aux_dir=`cd $ac_aux_dir && pwd`
pidgin-extprefs-0.7/aclocal.m4-7125-])
##############################################
pidgin-extprefs-0.7/aclocal.m4-7223- if test "$am_compiler_list" = ""; then
pidgin-extprefs-0.7/aclocal.m4:7224: am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
pidgin-extprefs-0.7/aclocal.m4-7225- fi
##############################################
pidgin-extprefs-0.7/aclocal.m4-7335- # Strip MF so we end up with the name of the file.
pidgin-extprefs-0.7/aclocal.m4:7336: mf=`echo "$mf" | sed -e 's/:.*$//'`
pidgin-extprefs-0.7/aclocal.m4-7337- # Check whether this is an Automake generated Makefile or not.
##############################################
pidgin-extprefs-0.7/aclocal.m4-7344- if sed 10q "$mf" | grep '^#.*generated by automake' > /dev/null 2>&1; then
pidgin-extprefs-0.7/aclocal.m4:7345: dirpart=`AS_DIRNAME("$mf")`
pidgin-extprefs-0.7/aclocal.m4-7346- else
##############################################
pidgin-extprefs-0.7/aclocal.m4-7350- # from the Makefile without running `make'.
pidgin-extprefs-0.7/aclocal.m4:7351: DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
pidgin-extprefs-0.7/aclocal.m4-7352- test -z "$DEPDIR" && continue
pidgin-extprefs-0.7/aclocal.m4:7353: am__include=`sed -n 's/^am__include = //p' < "$mf"`
pidgin-extprefs-0.7/aclocal.m4-7354- test -z "am__include" && continue
pidgin-extprefs-0.7/aclocal.m4:7355: am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
pidgin-extprefs-0.7/aclocal.m4-7356- # When using ansi2knr, U may be empty or an underscore; expand it
pidgin-extprefs-0.7/aclocal.m4:7357: U=`sed -n 's/^U = //p' < "$mf"`
pidgin-extprefs-0.7/aclocal.m4-7358- # Find all dependency output files, they are included files with
##############################################
pidgin-extprefs-0.7/aclocal.m4-7366- test -f "$dirpart/$file" && continue
pidgin-extprefs-0.7/aclocal.m4:7367: fdir=`AS_DIRNAME(["$file"])`
pidgin-extprefs-0.7/aclocal.m4-7368- AS_MKDIR_P([$dirpart/$fdir])
##############################################
pidgin-extprefs-0.7/aclocal.m4-7432-AC_REQUIRE([AC_PROG_INSTALL])dnl
pidgin-extprefs-0.7/aclocal.m4:7433:if test "`cd $srcdir && pwd`" != "`pwd`"; then
pidgin-extprefs-0.7/aclocal.m4-7434- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
##############################################
pidgin-extprefs-0.7/aclocal.m4-7520- * )
pidgin-extprefs-0.7/aclocal.m4:7521: _am_stamp_count=`expr $_am_stamp_count + 1` ;;
pidgin-extprefs-0.7/aclocal.m4-7522- esac
pidgin-extprefs-0.7/aclocal.m4-7523-done
pidgin-extprefs-0.7/aclocal.m4:7524:echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
pidgin-extprefs-0.7/aclocal.m4-7525-
##############################################
pidgin-extprefs-0.7/aclocal.m4-7592-# case it prints its new name instead of `make'.
pidgin-extprefs-0.7/aclocal.m4:7593:if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
pidgin-extprefs-0.7/aclocal.m4-7594- am__include=include
##############################################
pidgin-extprefs-0.7/aclocal.m4-7600- echo '.include "confinc"' > confmf
pidgin-extprefs-0.7/aclocal.m4:7601: if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
pidgin-extprefs-0.7/aclocal.m4-7602- am__include=.include
##############################################
pidgin-extprefs-0.7/aclocal.m4-7731-if (
pidgin-extprefs-0.7/aclocal.m4:7732: set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
pidgin-extprefs-0.7/aclocal.m4-7733- if test "$[*]" = "X"; then
pidgin-extprefs-0.7/aclocal.m4-7734- # -L didn't work.
pidgin-extprefs-0.7/aclocal.m4:7735: set X `ls -t $srcdir/configure conftest.file`
pidgin-extprefs-0.7/aclocal.m4-7736- fi
##############################################
pidgin-extprefs-0.7/ltmain.sh-39-# The name of this program:
pidgin-extprefs-0.7/ltmain.sh:40:progname=`echo "$progpath" | $SED $basename`
pidgin-extprefs-0.7/ltmain.sh-41-modename="$progname"
##############################################
pidgin-extprefs-0.7/ltmain.sh-71- :
pidgin-extprefs-0.7/ltmain.sh:72:elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
pidgin-extprefs-0.7/ltmain.sh-73- # Yippee, $echo works!
##############################################
pidgin-extprefs-0.7/ltmain.sh-157- # we can't tell.
pidgin-extprefs-0.7/ltmain.sh:158: while (test "X"`$SHELL $0 --fallback-echo "X$testring" 2>/dev/null` \
pidgin-extprefs-0.7/ltmain.sh-159- = "XX$testring") >/dev/null 2>&1 &&
pidgin-extprefs-0.7/ltmain.sh:160: new_result=`expr "X$testring" : ".*" 2>&1` &&
pidgin-extprefs-0.7/ltmain.sh-161- max_cmd_len="$new_result" &&
##############################################
pidgin-extprefs-0.7/ltmain.sh-163- do
pidgin-extprefs-0.7/ltmain.sh:164: i=`expr $i + 1`
pidgin-extprefs-0.7/ltmain.sh-165- testring="$testring$testring"
##############################################
pidgin-extprefs-0.7/ltmain.sh-170- # It appears as though 1/2 is a usable value.
pidgin-extprefs-0.7/ltmain.sh:171: max_cmd_len=`expr $max_cmd_len \/ 2`
pidgin-extprefs-0.7/ltmain.sh-172-fi
##############################################
pidgin-extprefs-0.7/ltmain.sh-191- # If mktemp works, use that first and foremost
pidgin-extprefs-0.7/ltmain.sh:192: my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
pidgin-extprefs-0.7/ltmain.sh-193-
##############################################
pidgin-extprefs-0.7/ltmain.sh-223- win32_libid_type="unknown"
pidgin-extprefs-0.7/ltmain.sh:224: win32_fileres=`file -L $1 2>/dev/null`
pidgin-extprefs-0.7/ltmain.sh-225- case $win32_fileres in
##############################################
pidgin-extprefs-0.7/ltmain.sh-275- # but not from the CC environment variable when configure was run.
pidgin-extprefs-0.7/ltmain.sh:276: " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;;
pidgin-extprefs-0.7/ltmain.sh-277- # Blanks at the start of $base_compile will cause this to fail
##############################################
pidgin-extprefs-0.7/ltmain.sh-282- # Evaluate the configuration.
pidgin-extprefs-0.7/ltmain.sh:283: eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
pidgin-extprefs-0.7/ltmain.sh-284- CC_quoted=
##############################################
pidgin-extprefs-0.7/ltmain.sh-294- # user sometimes does CC=<HOST>-gcc so we need to match that to 'gcc'
pidgin-extprefs-0.7/ltmain.sh:295: trimedcc=`echo ${CC} | $SED -e "s/${host}-//g"`
pidgin-extprefs-0.7/ltmain.sh-296- # and sometimes libtool has CC=<HOST>-gcc but user does CC=gcc
##############################################
pidgin-extprefs-0.7/ltmain.sh-305- break ;;
pidgin-extprefs-0.7/ltmain.sh:306: "$trimedcc "* | " $trimedcc "* | "`$echo $trimedcc` "* | " `$echo $trimedcc` "*|\
pidgin-extprefs-0.7/ltmain.sh:307: "$extendcc "* | " $extendcc "* | "`$echo $extendcc` "* | " `$echo $extendcc` "*|\
pidgin-extprefs-0.7/ltmain.sh:308: "$mungedcc "* | " $mungedcc "* | "`$echo $mungedcc` "* | " `$echo $mungedcc` "*|\
pidgin-extprefs-0.7/ltmain.sh:309: " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*)
pidgin-extprefs-0.7/ltmain.sh-310- # The compiler in the base compile command matches
##############################################
pidgin-extprefs-0.7/ltmain.sh-376- esac
pidgin-extprefs-0.7/ltmain.sh:377: my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
pidgin-extprefs-0.7/ltmain.sh-378- my_xdir="$my_gentop/$my_xlib"
##############################################
pidgin-extprefs-0.7/ltmain.sh-396- darwin_curdir=`pwd`
pidgin-extprefs-0.7/ltmain.sh:397: darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'`
pidgin-extprefs-0.7/ltmain.sh:398: darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null`
pidgin-extprefs-0.7/ltmain.sh-399- if test -n "$darwin_arches"; then
pidgin-extprefs-0.7/ltmain.sh:400: darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'`
pidgin-extprefs-0.7/ltmain.sh-401- darwin_arch=
##############################################
pidgin-extprefs-0.7/ltmain.sh-411- ## Okay now we have a bunch of thin objects, gotta fatten them up :)
pidgin-extprefs-0.7/ltmain.sh:412: darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP`
pidgin-extprefs-0.7/ltmain.sh-413- darwin_file=
##############################################
pidgin-extprefs-0.7/ltmain.sh-415- for darwin_file in $darwin_filelist; do
pidgin-extprefs-0.7/ltmain.sh:416: darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
pidgin-extprefs-0.7/ltmain.sh-417- lipo -create -output "$darwin_file" $darwin_files
##############################################
pidgin-extprefs-0.7/ltmain.sh-430- esac
pidgin-extprefs-0.7/ltmain.sh:431: my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
pidgin-extprefs-0.7/ltmain.sh-432- done
##############################################
pidgin-extprefs-0.7/ltmain.sh-449- case $arg in
pidgin-extprefs-0.7/ltmain.sh:450: -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
pidgin-extprefs-0.7/ltmain.sh-451- *) optarg= ;;
##############################################
pidgin-extprefs-0.7/ltmain.sh-480- # Evaluate the configuration.
pidgin-extprefs-0.7/ltmain.sh:481: eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`"
pidgin-extprefs-0.7/ltmain.sh-482- else
##############################################
pidgin-extprefs-0.7/ltmain.sh-602-static)
pidgin-extprefs-0.7/ltmain.sh:603: build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
pidgin-extprefs-0.7/ltmain.sh-604- ;;
##############################################
pidgin-extprefs-0.7/ltmain.sh-723- -Wc,*)
pidgin-extprefs-0.7/ltmain.sh:724: args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
pidgin-extprefs-0.7/ltmain.sh-725- lastarg=
##############################################
pidgin-extprefs-0.7/ltmain.sh-740- IFS="$save_ifs"
pidgin-extprefs-0.7/ltmain.sh:741: lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
pidgin-extprefs-0.7/ltmain.sh-742-
##############################################
pidgin-extprefs-0.7/ltmain.sh-759- # Aesthetically quote the previous argument.
pidgin-extprefs-0.7/ltmain.sh:760: lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
pidgin-extprefs-0.7/ltmain.sh-761-
##############################################
pidgin-extprefs-0.7/ltmain.sh-787- # Get the name of the library object.
pidgin-extprefs-0.7/ltmain.sh:788: [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
pidgin-extprefs-0.7/ltmain.sh-789- ;;
##############################################
pidgin-extprefs-0.7/ltmain.sh-798- *.ads) xform=ads ;;
pidgin-extprefs-0.7/ltmain.sh:799: *.asm) xform=asm ;;
pidgin-extprefs-0.7/ltmain.sh-800- *.c++) xform=c++ ;;
##############################################
pidgin-extprefs-0.7/ltmain.sh-810-
pidgin-extprefs-0.7/ltmain.sh:811: libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
pidgin-extprefs-0.7/ltmain.sh-812-
pidgin-extprefs-0.7/ltmain.sh-813- case $libobj in
pidgin-extprefs-0.7/ltmain.sh:814: *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
pidgin-extprefs-0.7/ltmain.sh-815- *)
##############################################
pidgin-extprefs-0.7/ltmain.sh-841-
pidgin-extprefs-0.7/ltmain.sh:842: qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"`
pidgin-extprefs-0.7/ltmain.sh-843- case $qlibobj in
##############################################
pidgin-extprefs-0.7/ltmain.sh-849- && $echo "$modename: libobj name \`$libobj' may not contain shell special characters."
pidgin-extprefs-0.7/ltmain.sh:850: objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
pidgin-extprefs-0.7/ltmain.sh:851: xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
pidgin-extprefs-0.7/ltmain.sh-852- if test "X$xdir" = "X$obj"; then
##############################################
pidgin-extprefs-0.7/ltmain.sh-888- if test "$compiler_c_o" = no; then
pidgin-extprefs-0.7/ltmain.sh:889: output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
pidgin-extprefs-0.7/ltmain.sh-890- lockfile="$output_obj.lock"
##############################################
pidgin-extprefs-0.7/ltmain.sh-909-*** ERROR, $lockfile exists and contains:
pidgin-extprefs-0.7/ltmain.sh:910:`cat $lockfile 2>/dev/null`
pidgin-extprefs-0.7/ltmain.sh-911-
##############################################
pidgin-extprefs-0.7/ltmain.sh-927- fi
pidgin-extprefs-0.7/ltmain.sh:928: qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"`
pidgin-extprefs-0.7/ltmain.sh-929- case $qsrcfile in
##############################################
pidgin-extprefs-0.7/ltmain.sh-983- if test "$need_locks" = warn &&
pidgin-extprefs-0.7/ltmain.sh:984: test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
pidgin-extprefs-0.7/ltmain.sh-985- $echo "\
pidgin-extprefs-0.7/ltmain.sh-986-*** ERROR, $lockfile contains:
pidgin-extprefs-0.7/ltmain.sh:987:`cat $lockfile 2>/dev/null`
pidgin-extprefs-0.7/ltmain.sh-988-
##############################################
pidgin-extprefs-0.7/ltmain.sh-1055- if test "$need_locks" = warn &&
pidgin-extprefs-0.7/ltmain.sh:1056: test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
pidgin-extprefs-0.7/ltmain.sh-1057- $echo "\
pidgin-extprefs-0.7/ltmain.sh-1058-*** ERROR, $lockfile contains:
pidgin-extprefs-0.7/ltmain.sh:1059:`cat $lockfile 2>/dev/null`
pidgin-extprefs-0.7/ltmain.sh-1060-
##############################################
pidgin-extprefs-0.7/ltmain.sh-1219- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
pidgin-extprefs-0.7/ltmain.sh:1220: qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
pidgin-extprefs-0.7/ltmain.sh-1221- ;;
##############################################
pidgin-extprefs-0.7/ltmain.sh-1308- moreargs=
pidgin-extprefs-0.7/ltmain.sh:1309: for fil in `cat $save_arg`
pidgin-extprefs-0.7/ltmain.sh-1310- do
##############################################
pidgin-extprefs-0.7/ltmain.sh-1335- # Extract subdirectory from the argument.
pidgin-extprefs-0.7/ltmain.sh:1336: xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
pidgin-extprefs-0.7/ltmain.sh-1337- if test "X$xdir" = "X$arg"; then
##############################################
pidgin-extprefs-0.7/ltmain.sh-1394- # Extract subdirectory from the argument.
pidgin-extprefs-0.7/ltmain.sh:1395: xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
pidgin-extprefs-0.7/ltmain.sh-1396- if test "X$xdir" = "X$arg"; then
##############################################
pidgin-extprefs-0.7/ltmain.sh-1401-
pidgin-extprefs-0.7/ltmain.sh:1402: pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
pidgin-extprefs-0.7/ltmain.sh:1403: non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
pidgin-extprefs-0.7/ltmain.sh-1404- libobjs="$libobjs $pic_object"
##############################################
pidgin-extprefs-0.7/ltmain.sh-1562- -L*)
pidgin-extprefs-0.7/ltmain.sh:1563: dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
pidgin-extprefs-0.7/ltmain.sh-1564- # We need an absolute path.
##############################################
pidgin-extprefs-0.7/ltmain.sh-1567- *)
pidgin-extprefs-0.7/ltmain.sh:1568: absdir=`cd "$dir" && pwd`
pidgin-extprefs-0.7/ltmain.sh-1569- if test -z "$absdir"; then
##############################################
pidgin-extprefs-0.7/ltmain.sh-1585- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
pidgin-extprefs-0.7/ltmain.sh:1586: testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'`
pidgin-extprefs-0.7/ltmain.sh-1587- case :$dllsearchpath: in
##############################################
pidgin-extprefs-0.7/ltmain.sh-1677- # to be aesthetically quoted because they are evaled later.
pidgin-extprefs-0.7/ltmain.sh:1678: arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
pidgin-extprefs-0.7/ltmain.sh-1679- case $arg in
##############################################
pidgin-extprefs-0.7/ltmain.sh-1746- -R*)
pidgin-extprefs-0.7/ltmain.sh:1747: dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
pidgin-extprefs-0.7/ltmain.sh-1748- # We need an absolute path.
##############################################
pidgin-extprefs-0.7/ltmain.sh-1787- -Wc,*)
pidgin-extprefs-0.7/ltmain.sh:1788: args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
pidgin-extprefs-0.7/ltmain.sh-1789- arg=
##############################################
pidgin-extprefs-0.7/ltmain.sh-1801- IFS="$save_ifs"
pidgin-extprefs-0.7/ltmain.sh:1802: arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
pidgin-extprefs-0.7/ltmain.sh-1803- ;;
##############################################
pidgin-extprefs-0.7/ltmain.sh-1805- -Wl,*)
pidgin-extprefs-0.7/ltmain.sh:1806: args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
pidgin-extprefs-0.7/ltmain.sh-1807- arg=
##############################################
pidgin-extprefs-0.7/ltmain.sh-1820- IFS="$save_ifs"
pidgin-extprefs-0.7/ltmain.sh:1821: arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
pidgin-extprefs-0.7/ltmain.sh-1822- ;;
##############################################
pidgin-extprefs-0.7/ltmain.sh-1842- # to be aesthetically quoted because they are evaled later.
pidgin-extprefs-0.7/ltmain.sh:1843: arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
pidgin-extprefs-0.7/ltmain.sh-1844- case $arg in
##############################################
pidgin-extprefs-0.7/ltmain.sh-1879- # Extract subdirectory from the argument.
pidgin-extprefs-0.7/ltmain.sh:1880: xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
pidgin-extprefs-0.7/ltmain.sh-1881- if test "X$xdir" = "X$arg"; then
##############################################
pidgin-extprefs-0.7/ltmain.sh-1938- # Extract subdirectory from the argument.
pidgin-extprefs-0.7/ltmain.sh:1939: xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
pidgin-extprefs-0.7/ltmain.sh-1940- if test "X$xdir" = "X$arg"; then
##############################################
pidgin-extprefs-0.7/ltmain.sh-1945-
pidgin-extprefs-0.7/ltmain.sh:1946: pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
pidgin-extprefs-0.7/ltmain.sh:1947: non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
pidgin-extprefs-0.7/ltmain.sh-1948- libobjs="$libobjs $pic_object"
##############################################
pidgin-extprefs-0.7/ltmain.sh-1981- # to be aesthetically quoted because they are evaled later.
pidgin-extprefs-0.7/ltmain.sh:1982: arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
pidgin-extprefs-0.7/ltmain.sh-1983- case $arg in
##############################################
pidgin-extprefs-0.7/ltmain.sh-2011- # calculate the name of the file, without its directory
pidgin-extprefs-0.7/ltmain.sh:2012: outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
pidgin-extprefs-0.7/ltmain.sh-2013- libobjs_save="$libobjs"
##############################################
pidgin-extprefs-0.7/ltmain.sh-2016- # get the directories listed in $shlibpath_var
pidgin-extprefs-0.7/ltmain.sh:2017: eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
pidgin-extprefs-0.7/ltmain.sh-2018- else
##############################################
pidgin-extprefs-0.7/ltmain.sh-2023-
pidgin-extprefs-0.7/ltmain.sh:2024: output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
pidgin-extprefs-0.7/ltmain.sh-2025- if test "X$output_objdir" = "X$output"; then
##############################################
pidgin-extprefs-0.7/ltmain.sh-2158- fi
pidgin-extprefs-0.7/ltmain.sh:2159: name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
pidgin-extprefs-0.7/ltmain.sh-2160- for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
##############################################
pidgin-extprefs-0.7/ltmain.sh-2202- found=no
pidgin-extprefs-0.7/ltmain.sh:2203: ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
pidgin-extprefs-0.7/ltmain.sh-2204- test "X$ladir" = "X$lib" && ladir="."
##############################################
pidgin-extprefs-0.7/ltmain.sh-2227- newdependency_libs="$deplib $newdependency_libs"
pidgin-extprefs-0.7/ltmain.sh:2228: newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
pidgin-extprefs-0.7/ltmain.sh-2229- ;;
##############################################
pidgin-extprefs-0.7/ltmain.sh-2240- fi
pidgin-extprefs-0.7/ltmain.sh:2241: newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
pidgin-extprefs-0.7/ltmain.sh-2242- ;;
##############################################
pidgin-extprefs-0.7/ltmain.sh-2250- if test "$pass" = link; then
pidgin-extprefs-0.7/ltmain.sh:2251: dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
pidgin-extprefs-0.7/ltmain.sh-2252- # Make sure the xrpath contains only unique directories.
##############################################
pidgin-extprefs-0.7/ltmain.sh-2272- set dummy $deplibs_check_method
pidgin-extprefs-0.7/ltmain.sh:2273: match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
pidgin-extprefs-0.7/ltmain.sh-2274- if eval $echo \"$deplib\" 2>/dev/null \
##############################################
pidgin-extprefs-0.7/ltmain.sh-2333- else
pidgin-extprefs-0.7/ltmain.sh:2334: $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2
pidgin-extprefs-0.7/ltmain.sh-2335- exit $EXIT_FAILURE
##############################################
pidgin-extprefs-0.7/ltmain.sh-2344-
pidgin-extprefs-0.7/ltmain.sh:2345: ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
pidgin-extprefs-0.7/ltmain.sh-2346- test "X$ladir" = "X$lib" && ladir="."
##############################################
pidgin-extprefs-0.7/ltmain.sh-2436- *)
pidgin-extprefs-0.7/ltmain.sh:2437: abs_ladir=`cd "$ladir" && pwd`
pidgin-extprefs-0.7/ltmain.sh-2438- if test -z "$abs_ladir"; then
##############################################
pidgin-extprefs-0.7/ltmain.sh-2444- esac
pidgin-extprefs-0.7/ltmain.sh:2445: laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
pidgin-extprefs-0.7/ltmain.sh-2446-
##############################################
pidgin-extprefs-0.7/ltmain.sh-2471- fi # $installed = yes
pidgin-extprefs-0.7/ltmain.sh:2472: name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
pidgin-extprefs-0.7/ltmain.sh-2473-
##############################################
pidgin-extprefs-0.7/ltmain.sh-2518- case $deplib in
pidgin-extprefs-0.7/ltmain.sh:2519: -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
pidgin-extprefs-0.7/ltmain.sh-2520- esac
##############################################
pidgin-extprefs-0.7/ltmain.sh-2637- shift; shift
pidgin-extprefs-0.7/ltmain.sh:2638: libname=`eval \\$echo \"$libname_spec\"`
pidgin-extprefs-0.7/ltmain.sh-2639- # use dlname if we got it. it's perfectly good, no?
##############################################
pidgin-extprefs-0.7/ltmain.sh-2645- *cygwin* | mingw*)
pidgin-extprefs-0.7/ltmain.sh:2646: major=`expr $current - $age`
pidgin-extprefs-0.7/ltmain.sh-2647- versuffix="-$major"
##############################################
pidgin-extprefs-0.7/ltmain.sh-2656- soroot="$soname"
pidgin-extprefs-0.7/ltmain.sh:2657: soname=`$echo $soroot | ${SED} -e 's/^.*\///'`
pidgin-extprefs-0.7/ltmain.sh:2658: newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a"
pidgin-extprefs-0.7/ltmain.sh-2659-
##############################################
pidgin-extprefs-0.7/ltmain.sh-2889- case $libdir in
pidgin-extprefs-0.7/ltmain.sh:2890: -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`
pidgin-extprefs-0.7/ltmain.sh-2891- case " $xrpath " in
##############################################
pidgin-extprefs-0.7/ltmain.sh-2921- *.la)
pidgin-extprefs-0.7/ltmain.sh:2922: dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'`
pidgin-extprefs-0.7/ltmain.sh-2923- test "X$dir" = "X$deplib" && dir="."
##############################################
pidgin-extprefs-0.7/ltmain.sh-2927- *)
pidgin-extprefs-0.7/ltmain.sh:2928: absdir=`cd "$dir" && pwd`
pidgin-extprefs-0.7/ltmain.sh-2929- if test -z "$absdir"; then
##############################################
pidgin-extprefs-0.7/ltmain.sh-2937- else
pidgin-extprefs-0.7/ltmain.sh:2938: eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
pidgin-extprefs-0.7/ltmain.sh-2939- if test -z "$libdir"; then
##############################################
pidgin-extprefs-0.7/ltmain.sh-2952- # but need to link against shared
pidgin-extprefs-0.7/ltmain.sh:2953: eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
pidgin-extprefs-0.7/ltmain.sh-2954- if test -n "$deplibrary_names" ; then
##############################################
pidgin-extprefs-0.7/ltmain.sh-2977- # Again, we only want to link against shared libraries
pidgin-extprefs-0.7/ltmain.sh:2978: eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"`
pidgin-extprefs-0.7/ltmain.sh-2979- for tmp in $newlib_search_path ; do
##############################################
pidgin-extprefs-0.7/ltmain.sh-3144- lib*)
pidgin-extprefs-0.7/ltmain.sh:3145: name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
pidgin-extprefs-0.7/ltmain.sh-3146- eval shared_ext=\"$shrext_cmds\"
##############################################
pidgin-extprefs-0.7/ltmain.sh-3150- if test "$module" = no; then
pidgin-extprefs-0.7/ltmain.sh:3151: $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
pidgin-extprefs-0.7/ltmain.sh-3152- $echo "$help" 1>&2
##############################################
pidgin-extprefs-0.7/ltmain.sh-3156- # Add the "lib" prefix for modules if required
pidgin-extprefs-0.7/ltmain.sh:3157: name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
pidgin-extprefs-0.7/ltmain.sh-3158- eval shared_ext=\"$shrext_cmds\"
##############################################
pidgin-extprefs-0.7/ltmain.sh-3160- else
pidgin-extprefs-0.7/ltmain.sh:3161: libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
pidgin-extprefs-0.7/ltmain.sh-3162- fi
##############################################
pidgin-extprefs-0.7/ltmain.sh-3237- darwin|linux|osf|windows)
pidgin-extprefs-0.7/ltmain.sh:3238: current=`expr $number_major + $number_minor`
pidgin-extprefs-0.7/ltmain.sh-3239- age="$number_minor"
##############################################
pidgin-extprefs-0.7/ltmain.sh-3247- irix|nonstopux)
pidgin-extprefs-0.7/ltmain.sh:3248: current=`expr $number_major + $number_minor - 1`
pidgin-extprefs-0.7/ltmain.sh-3249- age="$number_minor"
##############################################
pidgin-extprefs-0.7/ltmain.sh-3289- if test "$age" -gt "$current"; then
pidgin-extprefs-0.7/ltmain.sh:3290: $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
pidgin-extprefs-0.7/ltmain.sh-3291- $echo "$modename: \`$vinfo' is not valid version information" 1>&2
##############################################
pidgin-extprefs-0.7/ltmain.sh-3304- # verstring for coding it into the library header
pidgin-extprefs-0.7/ltmain.sh:3305: major=.`expr $current - $age`
pidgin-extprefs-0.7/ltmain.sh-3306- versuffix="$major.$age.$revision"
pidgin-extprefs-0.7/ltmain.sh-3307- # Darwin ld doesn't like 0 for these options...
pidgin-extprefs-0.7/ltmain.sh:3308: minor_current=`expr $current + 1`
pidgin-extprefs-0.7/ltmain.sh-3309- verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
##############################################
pidgin-extprefs-0.7/ltmain.sh-3322- irix | nonstopux)
pidgin-extprefs-0.7/ltmain.sh:3323: major=`expr $current - $age + 1`
pidgin-extprefs-0.7/ltmain.sh-3324-
##############################################
pidgin-extprefs-0.7/ltmain.sh-3333- while test "$loop" -ne 0; do
pidgin-extprefs-0.7/ltmain.sh:3334: iface=`expr $revision - $loop`
pidgin-extprefs-0.7/ltmain.sh:3335: loop=`expr $loop - 1`
pidgin-extprefs-0.7/ltmain.sh-3336- verstring="$verstring_prefix$major.$iface:$verstring"
##############################################
pidgin-extprefs-0.7/ltmain.sh-3344- linux)
pidgin-extprefs-0.7/ltmain.sh:3345: major=.`expr $current - $age`
pidgin-extprefs-0.7/ltmain.sh-3346- versuffix="$major.$age.$revision"
##############################################
pidgin-extprefs-0.7/ltmain.sh-3349- osf)
pidgin-extprefs-0.7/ltmain.sh:3350: major=.`expr $current - $age`
pidgin-extprefs-0.7/ltmain.sh-3351- versuffix=".$current.$age.$revision"
##############################################
pidgin-extprefs-0.7/ltmain.sh-3356- while test "$loop" -ne 0; do
pidgin-extprefs-0.7/ltmain.sh:3357: iface=`expr $current - $loop`
pidgin-extprefs-0.7/ltmain.sh:3358: loop=`expr $loop - 1`
pidgin-extprefs-0.7/ltmain.sh-3359- verstring="$verstring:${iface}.0"
##############################################
pidgin-extprefs-0.7/ltmain.sh-3373- # extension on DOS 8.3 filesystems.
pidgin-extprefs-0.7/ltmain.sh:3374: major=`expr $current - $age`
pidgin-extprefs-0.7/ltmain.sh-3375- versuffix="-$major"
##############################################
pidgin-extprefs-0.7/ltmain.sh-3428- removelist=
pidgin-extprefs-0.7/ltmain.sh:3429: tempremovelist=`$echo "$output_objdir/*"`
pidgin-extprefs-0.7/ltmain.sh-3430- for p in $tempremovelist; do
##############################################
pidgin-extprefs-0.7/ltmain.sh-3456- # Transform .lo files to .o files.
pidgin-extprefs-0.7/ltmain.sh:3457: oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
pidgin-extprefs-0.7/ltmain.sh-3458- fi
##############################################
pidgin-extprefs-0.7/ltmain.sh-3461- for path in $notinst_path; do
pidgin-extprefs-0.7/ltmain.sh:3462: lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`
pidgin-extprefs-0.7/ltmain.sh:3463: deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
pidgin-extprefs-0.7/ltmain.sh:3464: dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"`
pidgin-extprefs-0.7/ltmain.sh-3465- done
##############################################
pidgin-extprefs-0.7/ltmain.sh-3569- for i in $deplibs; do
pidgin-extprefs-0.7/ltmain.sh:3570: name=`expr $i : '-l\(.*\)'`
pidgin-extprefs-0.7/ltmain.sh-3571- # If $name is empty we are operating on a -L argument.
##############################################
pidgin-extprefs-0.7/ltmain.sh-3581- if test -n "$i" ; then
pidgin-extprefs-0.7/ltmain.sh:3582: libname=`eval \\$echo \"$libname_spec\"`
pidgin-extprefs-0.7/ltmain.sh:3583: deplib_matches=`eval \\$echo \"$library_names_spec\"`
pidgin-extprefs-0.7/ltmain.sh-3584- set dummy $deplib_matches
pidgin-extprefs-0.7/ltmain.sh-3585- deplib_match=$2
pidgin-extprefs-0.7/ltmain.sh:3586: if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
pidgin-extprefs-0.7/ltmain.sh-3587- newdeplibs="$newdeplibs $i"
##############################################
pidgin-extprefs-0.7/ltmain.sh-3606- for i in $deplibs; do
pidgin-extprefs-0.7/ltmain.sh:3607: name=`expr $i : '-l\(.*\)'`
pidgin-extprefs-0.7/ltmain.sh-3608- # If $name is empty we are operating on a -L argument.
##############################################
pidgin-extprefs-0.7/ltmain.sh-3623- if test -n "$i" ; then
pidgin-extprefs-0.7/ltmain.sh:3624: libname=`eval \\$echo \"$libname_spec\"`
pidgin-extprefs-0.7/ltmain.sh:3625: deplib_matches=`eval \\$echo \"$library_names_spec\"`
pidgin-extprefs-0.7/ltmain.sh-3626- set dummy $deplib_matches
pidgin-extprefs-0.7/ltmain.sh-3627- deplib_match=$2
pidgin-extprefs-0.7/ltmain.sh:3628: if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
pidgin-extprefs-0.7/ltmain.sh-3629- newdeplibs="$newdeplibs $i"
##############################################
pidgin-extprefs-0.7/ltmain.sh-3656- set dummy $deplibs_check_method
pidgin-extprefs-0.7/ltmain.sh:3657: file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
pidgin-extprefs-0.7/ltmain.sh-3658- for a_deplib in $deplibs; do
pidgin-extprefs-0.7/ltmain.sh:3659: name=`expr $a_deplib : '-l\(.*\)'`
pidgin-extprefs-0.7/ltmain.sh-3660- # If $name is empty we are operating on a -L argument.
##############################################
pidgin-extprefs-0.7/ltmain.sh-3670- if test -n "$a_deplib" ; then
pidgin-extprefs-0.7/ltmain.sh:3671: libname=`eval \\$echo \"$libname_spec\"`
pidgin-extprefs-0.7/ltmain.sh-3672- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
pidgin-extprefs-0.7/ltmain.sh:3673: potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
pidgin-extprefs-0.7/ltmain.sh-3674- for potent_lib in $potential_libs; do
##############################################
pidgin-extprefs-0.7/ltmain.sh-3686- while test -h "$potlib" 2>/dev/null; do
pidgin-extprefs-0.7/ltmain.sh:3687: potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
pidgin-extprefs-0.7/ltmain.sh-3688- case $potliblink in
pidgin-extprefs-0.7/ltmain.sh-3689- [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
pidgin-extprefs-0.7/ltmain.sh:3690: *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
pidgin-extprefs-0.7/ltmain.sh-3691- esac
##############################################
pidgin-extprefs-0.7/ltmain.sh-3732- set dummy $deplibs_check_method
pidgin-extprefs-0.7/ltmain.sh:3733: match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
pidgin-extprefs-0.7/ltmain.sh-3734- for a_deplib in $deplibs; do
pidgin-extprefs-0.7/ltmain.sh:3735: name=`expr $a_deplib : '-l\(.*\)'`
pidgin-extprefs-0.7/ltmain.sh-3736- # If $name is empty we are operating on a -L argument.
##############################################
pidgin-extprefs-0.7/ltmain.sh-3746- if test -n "$a_deplib" ; then
pidgin-extprefs-0.7/ltmain.sh:3747: libname=`eval \\$echo \"$libname_spec\"`
pidgin-extprefs-0.7/ltmain.sh-3748- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
pidgin-extprefs-0.7/ltmain.sh:3749: potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
pidgin-extprefs-0.7/ltmain.sh-3750- for potent_lib in $potential_libs; do
##############################################
pidgin-extprefs-0.7/ltmain.sh-3789- # can't use Xsed below, because $i might contain '/'
pidgin-extprefs-0.7/ltmain.sh:3790: tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"`
pidgin-extprefs-0.7/ltmain.sh-3791- done
##############################################
pidgin-extprefs-0.7/ltmain.sh-3814- # On Rhapsody replace the C library is the System framework
pidgin-extprefs-0.7/ltmain.sh:3815: newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'`
pidgin-extprefs-0.7/ltmain.sh-3816- ;;
##############################################
pidgin-extprefs-0.7/ltmain.sh-3983- # Use standard objects if they are pic
pidgin-extprefs-0.7/ltmain.sh:3984: test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
pidgin-extprefs-0.7/ltmain.sh-3985-
##############################################
pidgin-extprefs-0.7/ltmain.sh-3996- eval cmd=\"$cmd\"
pidgin-extprefs-0.7/ltmain.sh:3997: if len=`expr "X$cmd" : ".*"` &&
pidgin-extprefs-0.7/ltmain.sh-3998- test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
##############################################
pidgin-extprefs-0.7/ltmain.sh-4078- if test "X$skipped_export" != "X:" &&
pidgin-extprefs-0.7/ltmain.sh:4079: len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
pidgin-extprefs-0.7/ltmain.sh-4080- test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
##############################################
pidgin-extprefs-0.7/ltmain.sh-4097- save_output=$output
pidgin-extprefs-0.7/ltmain.sh:4098: output_la=`$echo "X$output" | $Xsed -e "$basename"`
pidgin-extprefs-0.7/ltmain.sh-4099-
##############################################
pidgin-extprefs-0.7/ltmain.sh-4113- if test "X$objlist" = X ||
pidgin-extprefs-0.7/ltmain.sh:4114: { len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
pidgin-extprefs-0.7/ltmain.sh-4115- test "$len" -le "$max_cmd_len"; }; then
##############################################
pidgin-extprefs-0.7/ltmain.sh-4128- last_robj=$output_objdir/$output_la-${k}.$objext
pidgin-extprefs-0.7/ltmain.sh:4129: k=`expr $k + 1`
pidgin-extprefs-0.7/ltmain.sh-4130- output=$output_objdir/$output_la-${k}.$objext
##############################################
pidgin-extprefs-0.7/ltmain.sh-4154- do
pidgin-extprefs-0.7/ltmain.sh:4155: i=`expr $i + 1`
pidgin-extprefs-0.7/ltmain.sh-4156- delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"
##############################################
pidgin-extprefs-0.7/ltmain.sh-4278- libobj="$output"
pidgin-extprefs-0.7/ltmain.sh:4279: obj=`$echo "X$output" | $Xsed -e "$lo2o"`
pidgin-extprefs-0.7/ltmain.sh-4280- ;;
##############################################
pidgin-extprefs-0.7/ltmain.sh-4312- # Create the old-style object.
pidgin-extprefs-0.7/ltmain.sh:4313: reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
pidgin-extprefs-0.7/ltmain.sh-4314-
##############################################
pidgin-extprefs-0.7/ltmain.sh-4373- case $host in
pidgin-extprefs-0.7/ltmain.sh:4374: *cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;;
pidgin-extprefs-0.7/ltmain.sh-4375- esac
##############################################
pidgin-extprefs-0.7/ltmain.sh-4393- # On Rhapsody replace the C library is the System framework
pidgin-extprefs-0.7/ltmain.sh:4394: compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
pidgin-extprefs-0.7/ltmain.sh:4395: finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
pidgin-extprefs-0.7/ltmain.sh-4396- ;;
##############################################
pidgin-extprefs-0.7/ltmain.sh-4481- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
pidgin-extprefs-0.7/ltmain.sh:4482: testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'`
pidgin-extprefs-0.7/ltmain.sh-4483- case :$dllsearchpath: in
##############################################
pidgin-extprefs-0.7/ltmain.sh-4539- # Transform all the library objects into standard objects.
pidgin-extprefs-0.7/ltmain.sh:4540: compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
pidgin-extprefs-0.7/ltmain.sh:4541: finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
pidgin-extprefs-0.7/ltmain.sh-4542- fi
##############################################
pidgin-extprefs-0.7/ltmain.sh-4585- # Add our own program objects to the symbol list.
pidgin-extprefs-0.7/ltmain.sh:4586: progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
pidgin-extprefs-0.7/ltmain.sh-4587- for arg in $progfiles; do
##############################################
pidgin-extprefs-0.7/ltmain.sh-4627- $show "extracting global C symbols from \`$arg'"
pidgin-extprefs-0.7/ltmain.sh:4628: name=`$echo "$arg" | ${SED} -e 's%^.*/%%'`
pidgin-extprefs-0.7/ltmain.sh-4629- $run eval '$echo ": $name " >> "$nlist"'
##############################################
pidgin-extprefs-0.7/ltmain.sh-4749- if test -f "$output_objdir/${outputname}.def" ; then
pidgin-extprefs-0.7/ltmain.sh:4750: compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
pidgin-extprefs-0.7/ltmain.sh:4751: finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
pidgin-extprefs-0.7/ltmain.sh-4752- else
pidgin-extprefs-0.7/ltmain.sh:4753: compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
pidgin-extprefs-0.7/ltmain.sh:4754: finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
pidgin-extprefs-0.7/ltmain.sh-4755- fi
##############################################
pidgin-extprefs-0.7/ltmain.sh-4757- * )
pidgin-extprefs-0.7/ltmain.sh:4758: compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
pidgin-extprefs-0.7/ltmain.sh:4759: finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
pidgin-extprefs-0.7/ltmain.sh-4760- ;;
##############################################
pidgin-extprefs-0.7/ltmain.sh-4773- # Nullify the symbol file.
pidgin-extprefs-0.7/ltmain.sh:4774: compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
pidgin-extprefs-0.7/ltmain.sh:4775: finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
pidgin-extprefs-0.7/ltmain.sh-4776- fi
##############################################
pidgin-extprefs-0.7/ltmain.sh-4779- # Replace the output file specification.
pidgin-extprefs-0.7/ltmain.sh:4780: compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
pidgin-extprefs-0.7/ltmain.sh-4781- link_command="$compile_command$compile_rpath"
##############################################
pidgin-extprefs-0.7/ltmain.sh-4846- # Replace the output file specification.
pidgin-extprefs-0.7/ltmain.sh:4847: link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
pidgin-extprefs-0.7/ltmain.sh-4848- # Delete the old output file.
##############################################
pidgin-extprefs-0.7/ltmain.sh-4866- if test "$fast_install" = yes; then
pidgin-extprefs-0.7/ltmain.sh:4867: relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
pidgin-extprefs-0.7/ltmain.sh-4868- else
##############################################
pidgin-extprefs-0.7/ltmain.sh-4878- # Replace the output file specification.
pidgin-extprefs-0.7/ltmain.sh:4879: link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
pidgin-extprefs-0.7/ltmain.sh-4880-
##############################################
pidgin-extprefs-0.7/ltmain.sh-4898- else
pidgin-extprefs-0.7/ltmain.sh:4899: var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
pidgin-extprefs-0.7/ltmain.sh-4900- relink_command="$var=\"$var_value\"; export $var; $relink_command"
##############################################
pidgin-extprefs-0.7/ltmain.sh-4903- relink_command="(cd `pwd`; $relink_command)"
pidgin-extprefs-0.7/ltmain.sh:4904: relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
pidgin-extprefs-0.7/ltmain.sh-4905- fi
##############################################
pidgin-extprefs-0.7/ltmain.sh-4912- esac
pidgin-extprefs-0.7/ltmain.sh:4913: qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
pidgin-extprefs-0.7/ltmain.sh-4914- else
pidgin-extprefs-0.7/ltmain.sh:4915: qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
pidgin-extprefs-0.7/ltmain.sh-4916- fi
##############################################
pidgin-extprefs-0.7/ltmain.sh-4922- case $output in
pidgin-extprefs-0.7/ltmain.sh:4923: *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;;
pidgin-extprefs-0.7/ltmain.sh-4924- esac
##############################################
pidgin-extprefs-0.7/ltmain.sh-4928- exeext=.exe
pidgin-extprefs-0.7/ltmain.sh:4929: outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;;
pidgin-extprefs-0.7/ltmain.sh-4930- *) exeext= ;;
##############################################
pidgin-extprefs-0.7/ltmain.sh-4933- *cygwin* | *mingw* )
pidgin-extprefs-0.7/ltmain.sh:4934: output_name=`basename $output`
pidgin-extprefs-0.7/ltmain.sh:4935: output_path=`dirname $output`
pidgin-extprefs-0.7/ltmain.sh-4936- cwrappersource="$output_path/$objdir/lt-$output_name.c"
##############################################
pidgin-extprefs-0.7/ltmain.sh-5329- shift
pidgin-extprefs-0.7/ltmain.sh:5330: elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
pidgin-extprefs-0.7/ltmain.sh-5331- # Yippee, \$echo works!
##############################################
pidgin-extprefs-0.7/ltmain.sh-5341- # Find the directory that this script lives in.
pidgin-extprefs-0.7/ltmain.sh:5342: thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
pidgin-extprefs-0.7/ltmain.sh-5343- test \"x\$thisdir\" = \"x\$file\" && thisdir=.
##############################################
pidgin-extprefs-0.7/ltmain.sh-5345- # Follow symbolic links until we get to the real thisdir.
pidgin-extprefs-0.7/ltmain.sh:5346: file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
pidgin-extprefs-0.7/ltmain.sh-5347- while test -n \"\$file\"; do
pidgin-extprefs-0.7/ltmain.sh:5348: destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
pidgin-extprefs-0.7/ltmain.sh-5349-
##############################################
pidgin-extprefs-0.7/ltmain.sh-5357-
pidgin-extprefs-0.7/ltmain.sh:5358: file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
pidgin-extprefs-0.7/ltmain.sh:5359: file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
pidgin-extprefs-0.7/ltmain.sh-5360- done
##############################################
pidgin-extprefs-0.7/ltmain.sh-5362- # Try to get the absolute directory name.
pidgin-extprefs-0.7/ltmain.sh:5363: absdir=\`cd \"\$thisdir\" && pwd\`
pidgin-extprefs-0.7/ltmain.sh-5364- test -n \"\$absdir\" && thisdir=\"\$absdir\"
##############################################
pidgin-extprefs-0.7/ltmain.sh-5372- if test ! -f \"\$progdir/\$program\" || \\
pidgin-extprefs-0.7/ltmain.sh:5373: { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
pidgin-extprefs-0.7/ltmain.sh-5374- test \"X\$file\" != \"X\$progdir/\$program\"; }; then
##############################################
pidgin-extprefs-0.7/ltmain.sh-5387- if test -n \"\$relink_command\"; then
pidgin-extprefs-0.7/ltmain.sh:5388: if relink_command_output=\`eval \$relink_command 2>&1\`; then :
pidgin-extprefs-0.7/ltmain.sh-5389- else
##############################################
pidgin-extprefs-0.7/ltmain.sh-5419- # The second colon is a workaround for a bug in BeOS R4 sed
pidgin-extprefs-0.7/ltmain.sh:5420: $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
pidgin-extprefs-0.7/ltmain.sh-5421-
##############################################
pidgin-extprefs-0.7/ltmain.sh-5537- do
pidgin-extprefs-0.7/ltmain.sh:5538: objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
pidgin-extprefs-0.7/ltmain.sh-5539- case " $oldobjs " in
##############################################
pidgin-extprefs-0.7/ltmain.sh-5545- newobj=lt$counter-$objbase
pidgin-extprefs-0.7/ltmain.sh:5546: counter=`expr $counter + 1`
pidgin-extprefs-0.7/ltmain.sh-5547- case " $oldobjs " in
##############################################
pidgin-extprefs-0.7/ltmain.sh-5563-
pidgin-extprefs-0.7/ltmain.sh:5564: if len=`expr "X$cmds" : ".*"` &&
pidgin-extprefs-0.7/ltmain.sh-5565- test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
##############################################
pidgin-extprefs-0.7/ltmain.sh-5585- eval test_cmds=\"$old_archive_cmds\"
pidgin-extprefs-0.7/ltmain.sh:5586: if len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
pidgin-extprefs-0.7/ltmain.sh-5587- test "$len" -le "$max_cmd_len"; then
##############################################
pidgin-extprefs-0.7/ltmain.sh-5637- else
pidgin-extprefs-0.7/ltmain.sh:5638: var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
pidgin-extprefs-0.7/ltmain.sh-5639- relink_command="$var=\"$var_value\"; export $var; $relink_command"
##############################################
pidgin-extprefs-0.7/ltmain.sh-5643- relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
pidgin-extprefs-0.7/ltmain.sh:5644: relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
pidgin-extprefs-0.7/ltmain.sh-5645- if test "$hardcode_automatic" = yes ; then
##############################################
pidgin-extprefs-0.7/ltmain.sh-5662- *.la)
pidgin-extprefs-0.7/ltmain.sh:5663: name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
pidgin-extprefs-0.7/ltmain.sh:5664: eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
pidgin-extprefs-0.7/ltmain.sh-5665- if test -z "$libdir"; then
##############################################
pidgin-extprefs-0.7/ltmain.sh-5674- if test "$installed" = yes && test "$D"; then
pidgin-extprefs-0.7/ltmain.sh:5675: eval mynewdependency_lib=`echo "$libdir/$name" |sed -e "s:$D:/:g" -e 's:/\+:/:g'`
pidgin-extprefs-0.7/ltmain.sh-5676- else
##############################################
pidgin-extprefs-0.7/ltmain.sh-5680- if test "$mynewdependency_lib"; then
pidgin-extprefs-0.7/ltmain.sh:5681: my_little_ninja_foo_1=`echo $newdependency_libs |$EGREP -e "$mynewdependency_lib"`
pidgin-extprefs-0.7/ltmain.sh-5682- if test -z "$my_little_ninja_foo_1"; then
##############################################
pidgin-extprefs-0.7/ltmain.sh-5694- # We do not want portage's build root ($S) present.
pidgin-extprefs-0.7/ltmain.sh:5695: my_little_ninja_foo_2=`echo $deplib |$EGREP -e "$S"`
pidgin-extprefs-0.7/ltmain.sh-5696- # We do not want portage's install root ($D) present.
pidgin-extprefs-0.7/ltmain.sh:5697: my_little_ninja_foo_3=`echo $deplib |$EGREP -e "$D"`
pidgin-extprefs-0.7/ltmain.sh-5698- if test -n "$my_little_ninja_foo_2" && test "$S"; then
##############################################
pidgin-extprefs-0.7/ltmain.sh-5700- elif test -n "$my_little_ninja_foo_3" && test "$D"; then
pidgin-extprefs-0.7/ltmain.sh:5701: eval mynewdependency_lib=`echo "$deplib" |sed -e "s:$D:/:g" -e 's:/\+:/:g'`
pidgin-extprefs-0.7/ltmain.sh-5702- else
##############################################
pidgin-extprefs-0.7/ltmain.sh-5709- if test "$mynewdependency_lib"; then
pidgin-extprefs-0.7/ltmain.sh:5710: my_little_ninja_foo_4=`echo $newdependency_libs |$EGREP -e "$mynewdependency_lib"`
pidgin-extprefs-0.7/ltmain.sh-5711- if test -z "$my_little_ninja_foo_4"; then
##############################################
pidgin-extprefs-0.7/ltmain.sh-5720- for lib in $dlfiles; do
pidgin-extprefs-0.7/ltmain.sh:5721: name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
pidgin-extprefs-0.7/ltmain.sh:5722: eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
pidgin-extprefs-0.7/ltmain.sh-5723- if test -z "$libdir"; then
##############################################
pidgin-extprefs-0.7/ltmain.sh-5731- for lib in $dlprefiles; do
pidgin-extprefs-0.7/ltmain.sh:5732: name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
pidgin-extprefs-0.7/ltmain.sh:5733: eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
pidgin-extprefs-0.7/ltmain.sh-5734- if test -z "$libdir"; then
##############################################
pidgin-extprefs-0.7/ltmain.sh-5768- if test "$installed" = yes && test "$D"; then
pidgin-extprefs-0.7/ltmain.sh:5769: install_libdir=`echo "$install_libdir" |sed -e "s:$D:/:g" -e 's:/\+:/:g'`
pidgin-extprefs-0.7/ltmain.sh-5770- fi
##############################################
pidgin-extprefs-0.7/ltmain.sh-5832- # Aesthetically quote it.
pidgin-extprefs-0.7/ltmain.sh:5833: arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
pidgin-extprefs-0.7/ltmain.sh-5834- case $arg in
##############################################
pidgin-extprefs-0.7/ltmain.sh-5848- # Aesthetically quote it.
pidgin-extprefs-0.7/ltmain.sh:5849: arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
pidgin-extprefs-0.7/ltmain.sh-5850- case $arg in
##############################################
pidgin-extprefs-0.7/ltmain.sh-5899- # Aesthetically quote the argument.
pidgin-extprefs-0.7/ltmain.sh:5900: arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
pidgin-extprefs-0.7/ltmain.sh-5901- case $arg in
##############################################
pidgin-extprefs-0.7/ltmain.sh-5931- # Strip any trailing slash from the destination.
pidgin-extprefs-0.7/ltmain.sh:5932: dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
pidgin-extprefs-0.7/ltmain.sh-5933-
##############################################
pidgin-extprefs-0.7/ltmain.sh-5939- else
pidgin-extprefs-0.7/ltmain.sh:5940: destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
pidgin-extprefs-0.7/ltmain.sh-5941- test "X$destdir" = "X$dest" && destdir=.
pidgin-extprefs-0.7/ltmain.sh:5942: destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
pidgin-extprefs-0.7/ltmain.sh-5943-
##############################################
pidgin-extprefs-0.7/ltmain.sh-6015-
pidgin-extprefs-0.7/ltmain.sh:6016: dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/
pidgin-extprefs-0.7/ltmain.sh-6017- test "X$dir" = "X$file/" && dir=
##############################################
pidgin-extprefs-0.7/ltmain.sh-6021- # Determine the prefix the user has applied to our future dir.
pidgin-extprefs-0.7/ltmain.sh:6022: inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"`
pidgin-extprefs-0.7/ltmain.sh-6023-
##############################################
pidgin-extprefs-0.7/ltmain.sh-6036- # Stick the inst_prefix_dir data into the link command.
pidgin-extprefs-0.7/ltmain.sh:6037: relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
pidgin-extprefs-0.7/ltmain.sh-6038- else
pidgin-extprefs-0.7/ltmain.sh:6039: relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
pidgin-extprefs-0.7/ltmain.sh-6040- fi
##############################################
pidgin-extprefs-0.7/ltmain.sh-6105- # Install the pseudo-library for information purposes.
pidgin-extprefs-0.7/ltmain.sh:6106: name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
pidgin-extprefs-0.7/ltmain.sh-6107- instname="$dir/$name"i
##############################################
pidgin-extprefs-0.7/ltmain.sh-6121- else
pidgin-extprefs-0.7/ltmain.sh:6122: destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
pidgin-extprefs-0.7/ltmain.sh-6123- destfile="$destdir/$destfile"
##############################################
pidgin-extprefs-0.7/ltmain.sh-6128- *.lo)
pidgin-extprefs-0.7/ltmain.sh:6129: staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
pidgin-extprefs-0.7/ltmain.sh-6130- ;;
##############################################
pidgin-extprefs-0.7/ltmain.sh-6150- # Deduce the name of the old-style object file.
pidgin-extprefs-0.7/ltmain.sh:6151: staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
pidgin-extprefs-0.7/ltmain.sh-6152-
##############################################
pidgin-extprefs-0.7/ltmain.sh-6163- else
pidgin-extprefs-0.7/ltmain.sh:6164: destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
pidgin-extprefs-0.7/ltmain.sh-6165- destfile="$destdir/$destfile"
##############################################
pidgin-extprefs-0.7/ltmain.sh-6174- if test ! -f "$file"; then
pidgin-extprefs-0.7/ltmain.sh:6175: file=`$echo $file|${SED} 's,.exe$,,'`
pidgin-extprefs-0.7/ltmain.sh-6176- stripped_ext=".exe"
##############################################
pidgin-extprefs-0.7/ltmain.sh-6183- *cygwin*|*mingw*)
pidgin-extprefs-0.7/ltmain.sh:6184: wrapper=`$echo $file | ${SED} -e 's,.exe$,,'`
pidgin-extprefs-0.7/ltmain.sh-6185- ;;
##############################################
pidgin-extprefs-0.7/ltmain.sh-6221- fi
pidgin-extprefs-0.7/ltmain.sh:6222: libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
pidgin-extprefs-0.7/ltmain.sh-6223- if test -n "$libdir" && test ! -f "$libfile"; then
pidgin-extprefs-0.7/ltmain.sh:6224: $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
pidgin-extprefs-0.7/ltmain.sh-6225- finalize=no
##############################################
pidgin-extprefs-0.7/ltmain.sh-6244- tmpdir=`func_mktempdir`
pidgin-extprefs-0.7/ltmain.sh:6245: file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
pidgin-extprefs-0.7/ltmain.sh-6246- outputname="$tmpdir/$file"
pidgin-extprefs-0.7/ltmain.sh-6247- # Replace the output file specification.
pidgin-extprefs-0.7/ltmain.sh:6248: relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
pidgin-extprefs-0.7/ltmain.sh-6249-
##############################################
pidgin-extprefs-0.7/ltmain.sh-6262- # Install the binary that we compiled earlier.
pidgin-extprefs-0.7/ltmain.sh:6263: file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
pidgin-extprefs-0.7/ltmain.sh-6264- fi
##############################################
pidgin-extprefs-0.7/ltmain.sh-6278- *:*.exe)
pidgin-extprefs-0.7/ltmain.sh:6279: destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'`
pidgin-extprefs-0.7/ltmain.sh-6280- ;;
##############################################
pidgin-extprefs-0.7/ltmain.sh-6291- for file in $staticlibs; do
pidgin-extprefs-0.7/ltmain.sh:6292: name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
pidgin-extprefs-0.7/ltmain.sh-6293-
##############################################
pidgin-extprefs-0.7/ltmain.sh-6448- # Warn if it was a shared library.
pidgin-extprefs-0.7/ltmain.sh:6449: test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
pidgin-extprefs-0.7/ltmain.sh-6450- continue
##############################################
pidgin-extprefs-0.7/ltmain.sh-6452-
pidgin-extprefs-0.7/ltmain.sh:6453: dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
pidgin-extprefs-0.7/ltmain.sh-6454- test "X$dir" = "X$file" && dir=.
##############################################
pidgin-extprefs-0.7/ltmain.sh-6458- else
pidgin-extprefs-0.7/ltmain.sh:6459: $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
pidgin-extprefs-0.7/ltmain.sh-6460- exit $EXIT_FAILURE
##############################################
pidgin-extprefs-0.7/ltmain.sh-6465- # Just add the directory containing the .lo file.
pidgin-extprefs-0.7/ltmain.sh:6466: dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
pidgin-extprefs-0.7/ltmain.sh-6467- test "X$dir" = "X$file" && dir=.
##############################################
pidgin-extprefs-0.7/ltmain.sh-6476- # Get the absolute pathname.
pidgin-extprefs-0.7/ltmain.sh:6477: absdir=`cd "$dir" && pwd`
pidgin-extprefs-0.7/ltmain.sh-6478- test -n "$absdir" && dir="$absdir"
##############################################
pidgin-extprefs-0.7/ltmain.sh-6512- # Quote arguments (to preserve shell metacharacters).
pidgin-extprefs-0.7/ltmain.sh:6513: file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
pidgin-extprefs-0.7/ltmain.sh-6514- args="$args \"$file\""
##############################################
pidgin-extprefs-0.7/ltmain.sh-6574- for file in $files; do
pidgin-extprefs-0.7/ltmain.sh:6575: dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
pidgin-extprefs-0.7/ltmain.sh-6576- if test "X$dir" = "X$file"; then
##############################################
pidgin-extprefs-0.7/ltmain.sh-6581- fi
pidgin-extprefs-0.7/ltmain.sh:6582: name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
pidgin-extprefs-0.7/ltmain.sh-6583- test "$mode" = uninstall && objdir="$dir"
##############################################
pidgin-extprefs-0.7/ltmain.sh-6691- *.exe)
pidgin-extprefs-0.7/ltmain.sh:6692: file=`$echo $file|${SED} 's,.exe$,,'`
pidgin-extprefs-0.7/ltmain.sh:6693: noexename=`$echo $name|${SED} 's,.exe$,,'`
pidgin-extprefs-0.7/ltmain.sh-6694- # $file with .exe has already been added to rmfiles,
##############################################
pidgin-extprefs-0.7/configure-107-do
pidgin-extprefs-0.7/configure:108: if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
pidgin-extprefs-0.7/configure-109- eval $as_var=C; export $as_var
##############################################
pidgin-extprefs-0.7/configure-215- test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
pidgin-extprefs-0.7/configure:216: test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
pidgin-extprefs-0.7/configure-217-") 2> /dev/null; then
##############################################
pidgin-extprefs-0.7/configure-330- test "x$as_lineno_1" != "x$as_lineno_2" &&
pidgin-extprefs-0.7/configure:331: test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
pidgin-extprefs-0.7/configure-332-
##############################################
pidgin-extprefs-0.7/configure-425- test "x$as_lineno_1" != "x$as_lineno_2" &&
pidgin-extprefs-0.7/configure:426: test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
pidgin-extprefs-0.7/configure-427-
##############################################
pidgin-extprefs-0.7/configure-536- esac;
pidgin-extprefs-0.7/configure:537: case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
pidgin-extprefs-0.7/configure-538- ???[sx]*):;;*)false;;esac;fi
##############################################
pidgin-extprefs-0.7/configure-558- # Remove one level of quotation (which was required for Make).
pidgin-extprefs-0.7/configure:559: ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','`
pidgin-extprefs-0.7/configure-560- ;;
##############################################
pidgin-extprefs-0.7/configure-569- :
pidgin-extprefs-0.7/configure:570:elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
pidgin-extprefs-0.7/configure-571- # Yippee, $echo works!
##############################################
pidgin-extprefs-0.7/configure-595- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
pidgin-extprefs-0.7/configure:596: if (echo_test_string=`eval $cmd`) 2>/dev/null &&
pidgin-extprefs-0.7/configure:597: echo_test_string=`eval $cmd` &&
pidgin-extprefs-0.7/configure-598- (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
##############################################
pidgin-extprefs-0.7/configure-604-
pidgin-extprefs-0.7/configure:605:if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
pidgin-extprefs-0.7/configure:606: echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
pidgin-extprefs-0.7/configure-607- test "X$echo_testing_string" = "X$echo_test_string"; then
##############################################
pidgin-extprefs-0.7/configure-619- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
pidgin-extprefs-0.7/configure:620: test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
pidgin-extprefs-0.7/configure:621: echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
pidgin-extprefs-0.7/configure-622- test "X$echo_testing_string" = "X$echo_test_string"; then
##############################################
pidgin-extprefs-0.7/configure-631- if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
pidgin-extprefs-0.7/configure:632: echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
pidgin-extprefs-0.7/configure-633- test "X$echo_testing_string" = "X$echo_test_string"; then
##############################################
pidgin-extprefs-0.7/configure-646- echo='printf %s\n'
pidgin-extprefs-0.7/configure:647: if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
pidgin-extprefs-0.7/configure:648: echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
pidgin-extprefs-0.7/configure-649- test "X$echo_testing_string" = "X$echo_test_string"; then
##############################################
pidgin-extprefs-0.7/configure-651- :
pidgin-extprefs-0.7/configure:652: elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
pidgin-extprefs-0.7/configure-653- test "X$echo_testing_string" = 'X\t' &&
pidgin-extprefs-0.7/configure:654: echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
pidgin-extprefs-0.7/configure-655- test "X$echo_testing_string" = "X$echo_test_string"; then
##############################################
pidgin-extprefs-0.7/configure-660- echo="$CONFIG_SHELL $0 --fallback-echo"
pidgin-extprefs-0.7/configure:661: elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
pidgin-extprefs-0.7/configure-662- test "X$echo_testing_string" = 'X\t' &&
pidgin-extprefs-0.7/configure:663: echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
pidgin-extprefs-0.7/configure-664- test "X$echo_testing_string" = "X$echo_test_string"; then
##############################################
pidgin-extprefs-0.7/configure-670- for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
pidgin-extprefs-0.7/configure:671: if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
pidgin-extprefs-0.7/configure-672- then
##############################################
pidgin-extprefs-0.7/configure-678- if test "$prev" != 'sed 50q "$0"'; then
pidgin-extprefs-0.7/configure:679: echo_test_string=`eval $prev`
pidgin-extprefs-0.7/configure-680- export echo_test_string
##############################################
pidgin-extprefs-0.7/configure-969- case $ac_option in
pidgin-extprefs-0.7/configure:970: *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
pidgin-extprefs-0.7/configure-971- *) ac_optarg=yes ;;
##############################################
pidgin-extprefs-0.7/configure-1012- -disable-* | --disable-*)
pidgin-extprefs-0.7/configure:1013: ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
pidgin-extprefs-0.7/configure-1014- # Reject names that are not valid shell variable names.
##############################################
pidgin-extprefs-0.7/configure-1017- { (exit 1); exit 1; }; }
pidgin-extprefs-0.7/configure:1018: ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
pidgin-extprefs-0.7/configure-1019- eval enable_$ac_feature=no ;;
##############################################
pidgin-extprefs-0.7/configure-1031- -enable-* | --enable-*)
pidgin-extprefs-0.7/configure:1032: ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
pidgin-extprefs-0.7/configure-1033- # Reject names that are not valid shell variable names.
##############################################
pidgin-extprefs-0.7/configure-1036- { (exit 1); exit 1; }; }
pidgin-extprefs-0.7/configure:1037: ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
pidgin-extprefs-0.7/configure-1038- eval enable_$ac_feature=\$ac_optarg ;;
##############################################
pidgin-extprefs-0.7/configure-1228- -with-* | --with-*)
pidgin-extprefs-0.7/configure:1229: ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
pidgin-extprefs-0.7/configure-1230- # Reject names that are not valid shell variable names.
##############################################
pidgin-extprefs-0.7/configure-1233- { (exit 1); exit 1; }; }
pidgin-extprefs-0.7/configure:1234: ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
pidgin-extprefs-0.7/configure-1235- eval with_$ac_package=\$ac_optarg ;;
##############################################
pidgin-extprefs-0.7/configure-1237- -without-* | --without-*)
pidgin-extprefs-0.7/configure:1238: ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
pidgin-extprefs-0.7/configure-1239- # Reject names that are not valid shell variable names.
##############################################
pidgin-extprefs-0.7/configure-1242- { (exit 1); exit 1; }; }
pidgin-extprefs-0.7/configure:1243: ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
pidgin-extprefs-0.7/configure-1244- eval with_$ac_package=no ;;
##############################################
pidgin-extprefs-0.7/configure-1269- *=*)
pidgin-extprefs-0.7/configure:1270: ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
pidgin-extprefs-0.7/configure-1271- # Reject names that are not valid shell variable names.
##############################################
pidgin-extprefs-0.7/configure-1289-if test -n "$ac_prev"; then
pidgin-extprefs-0.7/configure:1290: ac_option=--`echo $ac_prev | sed 's/_/-/g'`
pidgin-extprefs-0.7/configure-1291- { echo "$as_me: error: missing argument to $ac_option" >&2
##############################################
pidgin-extprefs-0.7/configure-1335-ac_ls_di=`ls -di .` &&
pidgin-extprefs-0.7/configure:1336:ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
pidgin-extprefs-0.7/configure-1337- { echo "$as_me: error: Working directory cannot be determined" >&2
##############################################
pidgin-extprefs-0.7/configure-1395-case $srcdir in
pidgin-extprefs-0.7/configure:1396:*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
pidgin-extprefs-0.7/configure-1397-esac
##############################################
pidgin-extprefs-0.7/configure-1438-By default, \`make install' will install all the files in
pidgin-extprefs-0.7/configure:1439:\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
pidgin-extprefs-0.7/configure:1440:an installation prefix other than \`$ac_default_prefix' using \`--prefix',
pidgin-extprefs-0.7/configure-1441-for instance \`--prefix=\$HOME'.
##############################################
pidgin-extprefs-0.7/configure-1543-*)
pidgin-extprefs-0.7/configure:1544: ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
pidgin-extprefs-0.7/configure-1545- # A ".." for each directory in $ac_dir_suffix.
pidgin-extprefs-0.7/configure:1546: ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
pidgin-extprefs-0.7/configure-1547- case $ac_top_builddir_sub in
##############################################
pidgin-extprefs-0.7/configure-1676- *\'*)
pidgin-extprefs-0.7/configure:1677: ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
pidgin-extprefs-0.7/configure-1678- esac
##############################################
pidgin-extprefs-0.7/configure-1762- case $ac_val in
pidgin-extprefs-0.7/configure:1763: *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
pidgin-extprefs-0.7/configure-1764- esac
##############################################
pidgin-extprefs-0.7/configure-1779- case $ac_val in
pidgin-extprefs-0.7/configure:1780: *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
pidgin-extprefs-0.7/configure-1781- esac
##############################################
pidgin-extprefs-0.7/configure-1887- set,)
pidgin-extprefs-0.7/configure:1888: { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
pidgin-extprefs-0.7/configure:1889:echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
pidgin-extprefs-0.7/configure-1890- ac_cache_corrupted=: ;;
##############################################
pidgin-extprefs-0.7/configure-1909- case $ac_new_val in
pidgin-extprefs-0.7/configure:1910: *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
pidgin-extprefs-0.7/configure-1911- *) ac_arg=$ac_var=$ac_new_val ;;
##############################################
pidgin-extprefs-0.7/configure-2076-if (
pidgin-extprefs-0.7/configure:2077: set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
pidgin-extprefs-0.7/configure-2078- if test "$*" = "X"; then
pidgin-extprefs-0.7/configure-2079- # -L didn't work.
pidgin-extprefs-0.7/configure:2080: set X `ls -t $srcdir/configure conftest.file`
pidgin-extprefs-0.7/configure-2081- fi
##############################################
pidgin-extprefs-0.7/configure-2120-_ACEOF
pidgin-extprefs-0.7/configure:2121:program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
pidgin-extprefs-0.7/configure-2122-rm -f conftest.sed
##############################################
pidgin-extprefs-0.7/configure-2124-# expand $ac_aux_dir to an absolute path
pidgin-extprefs-0.7/configure:2125:am_aux_dir=`cd $ac_aux_dir && pwd`
pidgin-extprefs-0.7/configure-2126-
##############################################
pidgin-extprefs-0.7/configure-2150- { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
pidgin-extprefs-0.7/configure:2151: case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
pidgin-extprefs-0.7/configure-2152- 'mkdir (GNU coreutils) '* | \
##############################################
pidgin-extprefs-0.7/configure-2228-echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; }
pidgin-extprefs-0.7/configure:2229:set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
pidgin-extprefs-0.7/configure-2230-if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
##############################################
pidgin-extprefs-0.7/configure-2238-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
pidgin-extprefs-0.7/configure:2239:case `${MAKE-make} -f conftest.make 2>/dev/null` in
pidgin-extprefs-0.7/configure-2240- *@@@%%%=?*=@@@%%%*)
##############################################
pidgin-extprefs-0.7/configure-2265-
pidgin-extprefs-0.7/configure:2266:if test "`cd $srcdir && pwd`" != "`pwd`"; then
pidgin-extprefs-0.7/configure-2267- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
##############################################
pidgin-extprefs-0.7/configure-2799-echo "$as_me:$LINENO: checking for C compiler version" >&5
pidgin-extprefs-0.7/configure:2800:ac_compiler=`set X $ac_compile; echo $2`
pidgin-extprefs-0.7/configure-2801-{ (ac_try="$ac_compiler --version >&5"
##############################################
pidgin-extprefs-0.7/configure-2853-echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; }
pidgin-extprefs-0.7/configure:2854:ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
pidgin-extprefs-0.7/configure-2855-#
##############################################
pidgin-extprefs-0.7/configure-2901- then :; else
pidgin-extprefs-0.7/configure:2902: ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
pidgin-extprefs-0.7/configure-2903- fi
##############################################
pidgin-extprefs-0.7/configure-2998- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
pidgin-extprefs-0.7/configure:2999: *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
pidgin-extprefs-0.7/configure-3000- break;;
##############################################
pidgin-extprefs-0.7/configure-3053- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;;
pidgin-extprefs-0.7/configure:3054: *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
pidgin-extprefs-0.7/configure-3055- break;;
##############################################
pidgin-extprefs-0.7/configure-3128-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; }
pidgin-extprefs-0.7/configure:3129:GCC=`test $ac_compiler_gnu = yes && echo yes`
pidgin-extprefs-0.7/configure-3130-ac_test_CFLAGS=${CFLAGS+set}
##############################################
pidgin-extprefs-0.7/configure-3427-# case it prints its new name instead of `make'.
pidgin-extprefs-0.7/configure:3428:if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
pidgin-extprefs-0.7/configure-3429- am__include=include
##############################################
pidgin-extprefs-0.7/configure-3435- echo '.include "confinc"' > confmf
pidgin-extprefs-0.7/configure:3436: if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
pidgin-extprefs-0.7/configure-3437- am__include=.include
##############################################
pidgin-extprefs-0.7/configure-3494- if test "$am_compiler_list" = ""; then
pidgin-extprefs-0.7/configure:3495: am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
pidgin-extprefs-0.7/configure-3496- fi
##############################################
pidgin-extprefs-0.7/configure-3739- (exit $ac_status); }; then
pidgin-extprefs-0.7/configure:3740: pkg_cv_PURPLE_CFLAGS=`$PKG_CONFIG --cflags "purple >= 2.0.0" 2>/dev/null`
pidgin-extprefs-0.7/configure-3741-else
##############################################
pidgin-extprefs-0.7/configure-3757- (exit $ac_status); }; then
pidgin-extprefs-0.7/configure:3758: pkg_cv_PURPLE_LIBS=`$PKG_CONFIG --libs "purple >= 2.0.0" 2>/dev/null`
pidgin-extprefs-0.7/configure-3759-else
##############################################
pidgin-extprefs-0.7/configure-3776- if test $_pkg_short_errors_supported = yes; then
pidgin-extprefs-0.7/configure:3777: PURPLE_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "purple >= 2.0.0"`
pidgin-extprefs-0.7/configure-3778- else
pidgin-extprefs-0.7/configure:3779: PURPLE_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "purple >= 2.0.0"`
pidgin-extprefs-0.7/configure-3780- fi
##############################################
pidgin-extprefs-0.7/configure-3856- (exit $ac_status); }; then
pidgin-extprefs-0.7/configure:3857: pkg_cv_PIDGIN_CFLAGS=`$PKG_CONFIG --cflags "pidgin >= 2.0.0" 2>/dev/null`
pidgin-extprefs-0.7/configure-3858-else
##############################################
pidgin-extprefs-0.7/configure-3874- (exit $ac_status); }; then
pidgin-extprefs-0.7/configure:3875: pkg_cv_PIDGIN_LIBS=`$PKG_CONFIG --libs "pidgin >= 2.0.0" 2>/dev/null`
pidgin-extprefs-0.7/configure-3876-else
##############################################
pidgin-extprefs-0.7/configure-3893- if test $_pkg_short_errors_supported = yes; then
pidgin-extprefs-0.7/configure:3894: PIDGIN_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "pidgin >= 2.0.0"`
pidgin-extprefs-0.7/configure-3895- else
pidgin-extprefs-0.7/configure:3896: PIDGIN_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "pidgin >= 2.0.0"`
pidgin-extprefs-0.7/configure-3897- fi
##############################################
pidgin-extprefs-0.7/configure-4141- if test x"$no_glib" = x ; then
pidgin-extprefs-0.7/configure:4142: GLIB_GENMARSHAL=`$PKG_CONFIG --variable=glib_genmarshal glib-2.0`
pidgin-extprefs-0.7/configure:4143: GOBJECT_QUERY=`$PKG_CONFIG --variable=gobject_query glib-2.0`
pidgin-extprefs-0.7/configure:4144: GLIB_MKENUMS=`$PKG_CONFIG --variable=glib_mkenums glib-2.0`
pidgin-extprefs-0.7/configure-4145-
pidgin-extprefs-0.7/configure:4146: GLIB_CFLAGS=`$PKG_CONFIG --cflags $pkg_config_args`
pidgin-extprefs-0.7/configure:4147: GLIB_LIBS=`$PKG_CONFIG --libs $pkg_config_args`
pidgin-extprefs-0.7/configure-4148- glib_config_major_version=`$PKG_CONFIG --modversion glib-2.0 | \
##############################################
pidgin-extprefs-0.7/configure-4473- if test x"$no_gtk" = x ; then
pidgin-extprefs-0.7/configure:4474: GTK_CFLAGS=`$PKG_CONFIG $pkg_config_args --cflags`
pidgin-extprefs-0.7/configure:4475: GTK_LIBS=`$PKG_CONFIG $pkg_config_args --libs`
pidgin-extprefs-0.7/configure-4476- gtk_config_major_version=`$PKG_CONFIG --modversion gtk+-2.0 | \
##############################################
pidgin-extprefs-0.7/configure-4803-test "x$ac_build_alias" = x &&
pidgin-extprefs-0.7/configure:4804: ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
pidgin-extprefs-0.7/configure-4805-test "x$ac_build_alias" = x &&
##############################################
pidgin-extprefs-0.7/configure-4808- { (exit 1); exit 1; }; }
pidgin-extprefs-0.7/configure:4809:ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
pidgin-extprefs-0.7/configure-4810- { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5
##############################################
pidgin-extprefs-0.7/configure-4833-IFS=$ac_save_IFS
pidgin-extprefs-0.7/configure:4834:case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
pidgin-extprefs-0.7/configure-4835-
##############################################
pidgin-extprefs-0.7/configure-4844-else
pidgin-extprefs-0.7/configure:4845: ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
pidgin-extprefs-0.7/configure-4846- { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5
##############################################
pidgin-extprefs-0.7/configure-4870-IFS=$ac_save_IFS
pidgin-extprefs-0.7/configure:4871:case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
pidgin-extprefs-0.7/configure-4872-
##############################################
pidgin-extprefs-0.7/configure-4916- test $lt_ac_count -gt 10 && break
pidgin-extprefs-0.7/configure:4917: lt_ac_count=`expr $lt_ac_count + 1`
pidgin-extprefs-0.7/configure-4918- if test $lt_ac_count -gt $lt_ac_max; then
##############################################
pidgin-extprefs-0.7/configure-4954- # Check for GNU $ac_path_GREP
pidgin-extprefs-0.7/configure:4955:case `"$ac_path_GREP" --version 2>&1` in
pidgin-extprefs-0.7/configure-4956-*GNU*)
##############################################
pidgin-extprefs-0.7/configure-4968- diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
pidgin-extprefs-0.7/configure:4969: ac_count=`expr $ac_count + 1`
pidgin-extprefs-0.7/configure-4970- if test $ac_count -gt ${ac_path_GREP_max-0}; then
##############################################
pidgin-extprefs-0.7/configure-5036- # Check for GNU $ac_path_EGREP
pidgin-extprefs-0.7/configure:5037:case `"$ac_path_EGREP" --version 2>&1` in
pidgin-extprefs-0.7/configure-5038-*GNU*)
##############################################
pidgin-extprefs-0.7/configure-5050- diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
pidgin-extprefs-0.7/configure:5051: ac_count=`expr $ac_count + 1`
pidgin-extprefs-0.7/configure-5052- if test $ac_count -gt ${ac_path_EGREP_max-0}; then
##############################################
pidgin-extprefs-0.7/configure-5108- # gcc leaves a trailing carriage return which upsets mingw
pidgin-extprefs-0.7/configure:5109: ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
pidgin-extprefs-0.7/configure-5110- *)
pidgin-extprefs-0.7/configure:5111: ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
pidgin-extprefs-0.7/configure-5112- esac
##############################################
pidgin-extprefs-0.7/configure-5117- # Canonicalize the pathname of ld
pidgin-extprefs-0.7/configure:5118: ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
pidgin-extprefs-0.7/configure-5119- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
pidgin-extprefs-0.7/configure:5120: ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
pidgin-extprefs-0.7/configure-5121- done
##############################################
pidgin-extprefs-0.7/configure-5152- # Break only if it was the GNU/non-GNU ld that we prefer.
pidgin-extprefs-0.7/configure:5153: case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
pidgin-extprefs-0.7/configure-5154- *GNU* | *'with BFD'*)
##############################################
pidgin-extprefs-0.7/configure-5185- # I'd rather use --version here, but apparently some GNU lds only accept -v.
pidgin-extprefs-0.7/configure:5186:case `$LD -v 2>&1 </dev/null` in
pidgin-extprefs-0.7/configure-5187-*GNU* | *'with BFD'*)
##############################################
pidgin-extprefs-0.7/configure-5248- # Tru64's nm complains that /dev/null is an invalid object file
pidgin-extprefs-0.7/configure:5249: case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
pidgin-extprefs-0.7/configure-5250- */dev/null* | *'Invalid file or object type'*)
##############################################
pidgin-extprefs-0.7/configure-5254- *)
pidgin-extprefs-0.7/configure:5255: case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
pidgin-extprefs-0.7/configure-5256- */dev/null*)
##############################################
pidgin-extprefs-0.7/configure-5416-openbsd*)
pidgin-extprefs-0.7/configure:5417: if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
pidgin-extprefs-0.7/configure-5418- lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
##############################################
pidgin-extprefs-0.7/configure-5500- (exit $ac_status); }; then
pidgin-extprefs-0.7/configure:5501: case `/usr/bin/file conftest.$ac_objext` in
pidgin-extprefs-0.7/configure-5502- *ELF-32*)
##############################################
pidgin-extprefs-0.7/configure-5520- if test "$lt_cv_prog_gnu_ld" = yes; then
pidgin-extprefs-0.7/configure:5521: case `/usr/bin/file conftest.$ac_objext` in
pidgin-extprefs-0.7/configure-5522- *32-bit*)
##############################################
pidgin-extprefs-0.7/configure-5532- else
pidgin-extprefs-0.7/configure:5533: case `/usr/bin/file conftest.$ac_objext` in
pidgin-extprefs-0.7/configure-5534- *32-bit*)
##############################################
pidgin-extprefs-0.7/configure-6110-do
pidgin-extprefs-0.7/configure:6111:as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
pidgin-extprefs-0.7/configure-6112-{ echo "$as_me:$LINENO: checking for $ac_header" >&5
##############################################
pidgin-extprefs-0.7/configure-6153-fi
pidgin-extprefs-0.7/configure:6154:ac_res=`eval echo '${'$as_ac_Header'}'`
pidgin-extprefs-0.7/configure-6155- { echo "$as_me:$LINENO: result: $ac_res" >&5
pidgin-extprefs-0.7/configure-6156-echo "${ECHO_T}$ac_res" >&6; }
pidgin-extprefs-0.7/configure:6157:if test `eval echo '${'$as_ac_Header'}'` = yes; then
pidgin-extprefs-0.7/configure-6158- cat >>confdefs.h <<_ACEOF
pidgin-extprefs-0.7/configure:6159:#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
pidgin-extprefs-0.7/configure-6160-_ACEOF
##############################################
pidgin-extprefs-0.7/configure-6169-do
pidgin-extprefs-0.7/configure:6170:as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
pidgin-extprefs-0.7/configure-6171-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
##############################################
pidgin-extprefs-0.7/configure-6176-fi
pidgin-extprefs-0.7/configure:6177:ac_res=`eval echo '${'$as_ac_Header'}'`
pidgin-extprefs-0.7/configure-6178- { echo "$as_me:$LINENO: result: $ac_res" >&5
##############################################
pidgin-extprefs-0.7/configure-6292-fi
pidgin-extprefs-0.7/configure:6293:ac_res=`eval echo '${'$as_ac_Header'}'`
pidgin-extprefs-0.7/configure-6294- { echo "$as_me:$LINENO: result: $ac_res" >&5
##############################################
pidgin-extprefs-0.7/configure-6297-fi
pidgin-extprefs-0.7/configure:6298:if test `eval echo '${'$as_ac_Header'}'` = yes; then
pidgin-extprefs-0.7/configure-6299- cat >>confdefs.h <<_ACEOF
pidgin-extprefs-0.7/configure:6300:#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
pidgin-extprefs-0.7/configure-6301-_ACEOF
##############################################
pidgin-extprefs-0.7/configure-6423-echo "$as_me:$LINENO: checking for C++ compiler version" >&5
pidgin-extprefs-0.7/configure:6424:ac_compiler=`set X $ac_compile; echo $2`
pidgin-extprefs-0.7/configure-6425-{ (ac_try="$ac_compiler --version >&5"
##############################################
pidgin-extprefs-0.7/configure-6509-echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6; }
pidgin-extprefs-0.7/configure:6510:GXX=`test $ac_compiler_gnu = yes && echo yes`
pidgin-extprefs-0.7/configure-6511-ac_test_CXXFLAGS=${CXXFLAGS+set}
##############################################
pidgin-extprefs-0.7/configure-6698- if test "$am_compiler_list" = ""; then
pidgin-extprefs-0.7/configure:6699: am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
pidgin-extprefs-0.7/configure-6700- fi
##############################################
pidgin-extprefs-0.7/configure-7123-echo "$as_me:$LINENO: checking for Fortran 77 compiler version" >&5
pidgin-extprefs-0.7/configure:7124:ac_compiler=`set X $ac_compile; echo $2`
pidgin-extprefs-0.7/configure-7125-{ (ac_try="$ac_compiler --version >&5"
##############################################
pidgin-extprefs-0.7/configure-7265-
pidgin-extprefs-0.7/configure:7266:G77=`test $ac_compiler_gnu = yes && echo yes`
pidgin-extprefs-0.7/configure-7267-ac_ext=c
##############################################
pidgin-extprefs-0.7/configure-7328- # And add a safety zone
pidgin-extprefs-0.7/configure:7329: lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
pidgin-extprefs-0.7/configure:7330: lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
pidgin-extprefs-0.7/configure-7331- ;;
##############################################
pidgin-extprefs-0.7/configure-7356- if test -n "$kargmax"; then
pidgin-extprefs-0.7/configure:7357: lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'`
pidgin-extprefs-0.7/configure-7358- else
##############################################
pidgin-extprefs-0.7/configure-7366- SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
pidgin-extprefs-0.7/configure:7367: while (test "X"`$SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \
pidgin-extprefs-0.7/configure-7368- = "XX$teststring") >/dev/null 2>&1 &&
pidgin-extprefs-0.7/configure:7369: new_result=`expr "X$teststring" : ".*" 2>&1` &&
pidgin-extprefs-0.7/configure-7370- lt_cv_sys_max_cmd_len=$new_result &&
##############################################
pidgin-extprefs-0.7/configure-7372- do
pidgin-extprefs-0.7/configure:7373: i=`expr $i + 1`
pidgin-extprefs-0.7/configure-7374- teststring=$teststring$teststring
##############################################
pidgin-extprefs-0.7/configure-7379- # It appears as though 1/2 is a usable value.
pidgin-extprefs-0.7/configure:7380: lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
pidgin-extprefs-0.7/configure-7381- ;;
##############################################
pidgin-extprefs-0.7/configure-7472-# If we're using GNU nm, then use its standard symbol codes.
pidgin-extprefs-0.7/configure:7473:case `$NM -V 2>&1` in
pidgin-extprefs-0.7/configure-7474-*GNU* | *'with BFD'*)
##############################################
pidgin-extprefs-0.7/configure-8008-done
pidgin-extprefs-0.7/configure:8009:cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
pidgin-extprefs-0.7/configure-8010-
##############################################
pidgin-extprefs-0.7/configure-8036- "file_magic "*)
pidgin-extprefs-0.7/configure:8037: file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
pidgin-extprefs-0.7/configure-8038- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
##############################################
pidgin-extprefs-0.7/configure-8098- "file_magic "*)
pidgin-extprefs-0.7/configure:8099: file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
pidgin-extprefs-0.7/configure-8100- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
##############################################
pidgin-extprefs-0.7/configure-8190-gentoo_lt_version="1.5.22"
pidgin-extprefs-0.7/configure:8191:gentoo_ltmain_version=`sed -n '/^[ ]*VERSION=/{s/^[ ]*VERSION=//;p;q;}' "$ltmain"`
pidgin-extprefs-0.7/configure-8192-if test "x$gentoo_lt_version" != "x$gentoo_ltmain_version" ; then
##############################################
pidgin-extprefs-0.7/configure-8716- if test "$hard_links" = no; then
pidgin-extprefs-0.7/configure:8717: { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
pidgin-extprefs-0.7/configure:8718:echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
pidgin-extprefs-0.7/configure-8719- need_locks=warn
##############################################
pidgin-extprefs-0.7/configure-8772-done
pidgin-extprefs-0.7/configure:8773:cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
pidgin-extprefs-0.7/configure-8774-
##############################################
pidgin-extprefs-0.7/configure-8810- supports_anon_versioning=no
pidgin-extprefs-0.7/configure:8811: case `$LD -v 2>/dev/null` in
pidgin-extprefs-0.7/configure-8812- *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
##############################################
pidgin-extprefs-0.7/configure-8874- # is EXPORTS), use it as is; otherwise, prepend...
pidgin-extprefs-0.7/configure:8875: archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
pidgin-extprefs-0.7/configure-8876- cp $export_symbols $output_objdir/$soname.def;
##############################################
pidgin-extprefs-0.7/configure-8897- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
pidgin-extprefs-0.7/configure:8898: archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
pidgin-extprefs-0.7/configure:8899: archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
pidgin-extprefs-0.7/configure-8900- ;;
##############################################
pidgin-extprefs-0.7/configure-8906- pgcc*) # Portland Group C compiler
pidgin-extprefs-0.7/configure:8907: whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
pidgin-extprefs-0.7/configure-8908- tmp_addflag=' $pic_flag'
##############################################
pidgin-extprefs-0.7/configure-8910- pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
pidgin-extprefs-0.7/configure:8911: whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
pidgin-extprefs-0.7/configure-8912- tmp_addflag=' $pic_flag -Mnomain' ;;
##############################################
pidgin-extprefs-0.7/configure-8964- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
pidgin-extprefs-0.7/configure:8965: case `$LD -v 2>&1` in
pidgin-extprefs-0.7/configure-8966- *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
##############################################
pidgin-extprefs-0.7/configure-8980- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
pidgin-extprefs-0.7/configure:8981: hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
pidgin-extprefs-0.7/configure-8982- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
##############################################
pidgin-extprefs-0.7/configure-9079- # below for broken collect2 doesn't work under 4.3+
pidgin-extprefs-0.7/configure:9080: collect2name=`${CC} -print-prog-name=collect2`
pidgin-extprefs-0.7/configure-9081- if test -f "$collect2name" && \
##############################################
pidgin-extprefs-0.7/configure-9175- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
pidgin-extprefs-0.7/configure:9176: archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
pidgin-extprefs-0.7/configure-9177- else
##############################################
pidgin-extprefs-0.7/configure-9271- # FIXME: Setting linknames here is a bad hack.
pidgin-extprefs-0.7/configure:9272: archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
pidgin-extprefs-0.7/configure-9273- # The linker will automatically build a .lib file if we build a DLL.
##############################################
pidgin-extprefs-0.7/configure-9276- old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs'
pidgin-extprefs-0.7/configure:9277: fix_srcfile_path='`cygpath -w "$srcfile"`'
pidgin-extprefs-0.7/configure-9278- enable_shared_with_static_runtimes=yes
##############################################
pidgin-extprefs-0.7/configure-9317- output_verbose_link_cmd='echo'
pidgin-extprefs-0.7/configure:9318: archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
pidgin-extprefs-0.7/configure-9319- module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
##############################################
pidgin-extprefs-0.7/configure-9452- if test "$GCC" = yes; then
pidgin-extprefs-0.7/configure:9453: archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
pidgin-extprefs-0.7/configure-9454- else
pidgin-extprefs-0.7/configure:9455: archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
pidgin-extprefs-0.7/configure-9456- hardcode_libdir_flag_spec_ld='-rpath $libdir'
##############################################
pidgin-extprefs-0.7/configure-9484- hardcode_shlibpath_var=no
pidgin-extprefs-0.7/configure:9485: if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
pidgin-extprefs-0.7/configure-9486- archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
##############################################
pidgin-extprefs-0.7/configure-9514- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
pidgin-extprefs-0.7/configure:9515: archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
pidgin-extprefs-0.7/configure-9516- else
pidgin-extprefs-0.7/configure-9517- allow_undefined_flag=' -expect_unresolved \*'
pidgin-extprefs-0.7/configure:9518: archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
pidgin-extprefs-0.7/configure-9519- fi
##############################################
pidgin-extprefs-0.7/configure-9526- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
pidgin-extprefs-0.7/configure:9527: archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
pidgin-extprefs-0.7/configure-9528- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
##############################################
pidgin-extprefs-0.7/configure-9530- allow_undefined_flag=' -expect_unresolved \*'
pidgin-extprefs-0.7/configure:9531: archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
pidgin-extprefs-0.7/configure:9532: archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
pidgin-extprefs-0.7/configure:9533: $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
pidgin-extprefs-0.7/configure-9534-
##############################################
pidgin-extprefs-0.7/configure-9567- *)
pidgin-extprefs-0.7/configure:9568: whole_archive_flag_spec='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
pidgin-extprefs-0.7/configure-9569- esac ;;
##############################################
pidgin-extprefs-0.7/configure-9651- hardcode_shlibpath_var=no
pidgin-extprefs-0.7/configure:9652: hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
pidgin-extprefs-0.7/configure-9653- hardcode_libdir_separator=':'
##############################################
pidgin-extprefs-0.7/configure-9761-if test "$GCC" = yes; then
pidgin-extprefs-0.7/configure:9762: sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
pidgin-extprefs-0.7/configure-9763- if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
##############################################
pidgin-extprefs-0.7/configure-9767- # okay in the real world where ";" in dirpaths is itself problematic.
pidgin-extprefs-0.7/configure:9768: sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
pidgin-extprefs-0.7/configure-9769- else
pidgin-extprefs-0.7/configure:9770: sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
pidgin-extprefs-0.7/configure-9771- fi
##############################################
pidgin-extprefs-0.7/configure-9838- # Create ${libname}_ixlibrary.a entries in /sys/libs.
pidgin-extprefs-0.7/configure:9839: finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
pidgin-extprefs-0.7/configure-9840- ;;
##############################################
pidgin-extprefs-0.7/configure-9871- # DLL is installed to $(libdir)/../bin by postinstall_cmds
pidgin-extprefs-0.7/configure:9872: postinstall_cmds='base_file=`basename \${file}`~
pidgin-extprefs-0.7/configure:9873: dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
pidgin-extprefs-0.7/configure:9874: dldir=$destdir/`dirname \$dlpath`~
pidgin-extprefs-0.7/configure-9875- test -d \$dldir || mkdir -p \$dldir~
##############################################
pidgin-extprefs-0.7/configure-9877- chmod a+x \$dldir/$dlname'
pidgin-extprefs-0.7/configure:9878: postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
pidgin-extprefs-0.7/configure-9879- dlpath=$dir/\$dldll~
##############################################
pidgin-extprefs-0.7/configure-9885- # Cygwin DLLs use 'cyg' prefix rather than 'lib'
pidgin-extprefs-0.7/configure:9886: soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
pidgin-extprefs-0.7/configure-9887- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
##############################################
pidgin-extprefs-0.7/configure-9890- # MinGW DLLs use traditional 'lib' prefix
pidgin-extprefs-0.7/configure:9891: soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
pidgin-extprefs-0.7/configure:9892: sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
pidgin-extprefs-0.7/configure-9893- if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
##############################################
pidgin-extprefs-0.7/configure-9899- # which wouldn't understand a cygwinified path. Ahh.
pidgin-extprefs-0.7/configure:9900: sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
pidgin-extprefs-0.7/configure-9901- else
pidgin-extprefs-0.7/configure:9902: sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
pidgin-extprefs-0.7/configure-9903- fi
##############################################
pidgin-extprefs-0.7/configure-9906- # pw32 DLLs use 'pw' prefix rather than 'lib'
pidgin-extprefs-0.7/configure:9907: library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
pidgin-extprefs-0.7/configure-9908- ;;
##############################################
pidgin-extprefs-0.7/configure-9915- supports_anon_versioning=no
pidgin-extprefs-0.7/configure:9916: case `$LD -v 2>/dev/null` in
pidgin-extprefs-0.7/configure-9917- *\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
##############################################
pidgin-extprefs-0.7/configure-9936- *)
pidgin-extprefs-0.7/configure:9937: library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
pidgin-extprefs-0.7/configure-9938- ;;
##############################################
pidgin-extprefs-0.7/configure-9953- shlibpath_var=DYLD_LIBRARY_PATH
pidgin-extprefs-0.7/configure:9954: shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
pidgin-extprefs-0.7/configure-9955- # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
pidgin-extprefs-0.7/configure-9956- if test "$GCC" = yes; then
pidgin-extprefs-0.7/configure:9957: sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
pidgin-extprefs-0.7/configure-9958- else
##############################################
pidgin-extprefs-0.7/configure-10172- if test -f /etc/ld.so.conf; then
pidgin-extprefs-0.7/configure:10173: lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
pidgin-extprefs-0.7/configure-10174- sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
##############################################
pidgin-extprefs-0.7/configure-10244- shlibpath_var=LD_LIBRARY_PATH
pidgin-extprefs-0.7/configure:10245: if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
pidgin-extprefs-0.7/configure-10246- case $host_os in
##############################################
pidgin-extprefs-0.7/configure-11332- # Double-quote double-evaled strings.
pidgin-extprefs-0.7/configure:11333: eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
pidgin-extprefs-0.7/configure-11334- ;;
pidgin-extprefs-0.7/configure-11335- *)
pidgin-extprefs-0.7/configure:11336: eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
pidgin-extprefs-0.7/configure-11337- ;;
##############################################
pidgin-extprefs-0.7/configure-11342- *'\$0 --fallback-echo"')
pidgin-extprefs-0.7/configure:11343: lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
pidgin-extprefs-0.7/configure-11344- ;;
##############################################
pidgin-extprefs-0.7/configure-11355-
pidgin-extprefs-0.7/configure:11356:# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
pidgin-extprefs-0.7/configure-11357-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
##############################################
pidgin-extprefs-0.7/configure-11734- # libtool script then.
pidgin-extprefs-0.7/configure:11735: ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
pidgin-extprefs-0.7/configure-11736- if test -f "$ltmain_in"; then
##############################################
pidgin-extprefs-0.7/configure-11763- if test -z "$LTCC"; then
pidgin-extprefs-0.7/configure:11764: eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
pidgin-extprefs-0.7/configure-11765- if test -z "$LTCC"; then
##############################################
pidgin-extprefs-0.7/configure-11768- else
pidgin-extprefs-0.7/configure:11769: { echo "$as_me:$LINENO: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&5
pidgin-extprefs-0.7/configure:11770:echo "$as_me: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&2;}
pidgin-extprefs-0.7/configure-11771- fi
##############################################
pidgin-extprefs-0.7/configure-11773- if test -z "$LTCFLAGS"; then
pidgin-extprefs-0.7/configure:11774: eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
pidgin-extprefs-0.7/configure-11775- fi
##############################################
pidgin-extprefs-0.7/configure-11778- # Note that this assumes the entire list is on one line.
pidgin-extprefs-0.7/configure:11779: available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
pidgin-extprefs-0.7/configure-11780-
##############################################
pidgin-extprefs-0.7/configure-11784- # Check whether tagname contains only valid characters
pidgin-extprefs-0.7/configure:11785: case `$echo "X$tagname" | $Xsed -e 's:[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]::g'` in
pidgin-extprefs-0.7/configure-11786- "") ;;
##############################################
pidgin-extprefs-0.7/configure-11912-done
pidgin-extprefs-0.7/configure:11913:cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
pidgin-extprefs-0.7/configure-11914-
##############################################
pidgin-extprefs-0.7/configure-11942- # gcc leaves a trailing carriage return which upsets mingw
pidgin-extprefs-0.7/configure:11943: ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
pidgin-extprefs-0.7/configure-11944- *)
pidgin-extprefs-0.7/configure:11945: ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
pidgin-extprefs-0.7/configure-11946- esac
##############################################
pidgin-extprefs-0.7/configure-11951- # Canonicalize the pathname of ld
pidgin-extprefs-0.7/configure:11952: ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
pidgin-extprefs-0.7/configure-11953- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
pidgin-extprefs-0.7/configure:11954: ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
pidgin-extprefs-0.7/configure-11955- done
##############################################
pidgin-extprefs-0.7/configure-11986- # Break only if it was the GNU/non-GNU ld that we prefer.
pidgin-extprefs-0.7/configure:11987: case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
pidgin-extprefs-0.7/configure-11988- *GNU* | *'with BFD'*)
##############################################
pidgin-extprefs-0.7/configure-12019- # I'd rather use --version here, but apparently some GNU lds only accept -v.
pidgin-extprefs-0.7/configure:12020:case `$LD -v 2>&1 </dev/null` in
pidgin-extprefs-0.7/configure-12021-*GNU* | *'with BFD'*)
##############################################
pidgin-extprefs-0.7/configure-12049- # ancient GNU ld didn't support --whole-archive et. al.
pidgin-extprefs-0.7/configure:12050: if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
pidgin-extprefs-0.7/configure-12051- grep 'no-whole-archive' > /dev/null; then
##############################################
pidgin-extprefs-0.7/configure-12131- # below for broken collect2 doesn't work under 4.3+
pidgin-extprefs-0.7/configure:12132: collect2name=`${CC} -print-prog-name=collect2`
pidgin-extprefs-0.7/configure-12133- if test -f "$collect2name" && \
##############################################
pidgin-extprefs-0.7/configure-12228-
pidgin-extprefs-0.7/configure:12229: archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
pidgin-extprefs-0.7/configure-12230- else
##############################################
pidgin-extprefs-0.7/configure-12332- # is EXPORTS), use it as is; otherwise, prepend...
pidgin-extprefs-0.7/configure:12333: archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
pidgin-extprefs-0.7/configure-12334- cp $export_symbols $output_objdir/$soname.def;
##############################################
pidgin-extprefs-0.7/configure-12393- output_verbose_link_cmd='echo'
pidgin-extprefs-0.7/configure:12394: archive_cmds_CXX='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
pidgin-extprefs-0.7/configure-12395- module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
##############################################
pidgin-extprefs-0.7/configure-12461- # dependencies.
pidgin-extprefs-0.7/configure:12462: output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
pidgin-extprefs-0.7/configure-12463- ;;
##############################################
pidgin-extprefs-0.7/configure-12525- # dependencies.
pidgin-extprefs-0.7/configure:12526: output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
pidgin-extprefs-0.7/configure-12527- ;;
##############################################
pidgin-extprefs-0.7/configure-12560- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
pidgin-extprefs-0.7/configure:12561: archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
pidgin-extprefs-0.7/configure:12562: archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
pidgin-extprefs-0.7/configure-12563- ;;
##############################################
pidgin-extprefs-0.7/configure-12567- # SGI C++
pidgin-extprefs-0.7/configure:12568: archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
pidgin-extprefs-0.7/configure-12569-
##############################################
pidgin-extprefs-0.7/configure-12578- if test "$with_gnu_ld" = no; then
pidgin-extprefs-0.7/configure:12579: archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
pidgin-extprefs-0.7/configure-12580- else
pidgin-extprefs-0.7/configure:12581: archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
pidgin-extprefs-0.7/configure-12582- fi
##############################################
pidgin-extprefs-0.7/configure-12597- # to its proper name (with version) after linking.
pidgin-extprefs-0.7/configure:12598: archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
pidgin-extprefs-0.7/configure:12599: archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
pidgin-extprefs-0.7/configure-12600- # Commands to make compiler produce verbose output that lists
##############################################
pidgin-extprefs-0.7/configure-12607- # dependencies.
pidgin-extprefs-0.7/configure:12608: output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
pidgin-extprefs-0.7/configure-12609-
##############################################
pidgin-extprefs-0.7/configure-12622- # earlier do not add the objects themselves.
pidgin-extprefs-0.7/configure:12623: case `$CC -V 2>&1` in
pidgin-extprefs-0.7/configure-12624- *"Version 7."*)
##############################################
pidgin-extprefs-0.7/configure-12648- export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
pidgin-extprefs-0.7/configure:12649: whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
pidgin-extprefs-0.7/configure-12650- ;;
##############################################
pidgin-extprefs-0.7/configure-12667- # dependencies.
pidgin-extprefs-0.7/configure:12668: output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
pidgin-extprefs-0.7/configure-12669- ;;
##############################################
pidgin-extprefs-0.7/configure-12711- hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
pidgin-extprefs-0.7/configure:12712: if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
pidgin-extprefs-0.7/configure-12713- archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
##############################################
pidgin-extprefs-0.7/configure-12726- # to its proper name (with version) after linking.
pidgin-extprefs-0.7/configure:12727: archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
pidgin-extprefs-0.7/configure-12728-
##############################################
pidgin-extprefs-0.7/configure-12743- allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
pidgin-extprefs-0.7/configure:12744: archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
pidgin-extprefs-0.7/configure-12745-
##############################################
pidgin-extprefs-0.7/configure-12756- # dependencies.
pidgin-extprefs-0.7/configure:12757: output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
pidgin-extprefs-0.7/configure-12758- ;;
##############################################
pidgin-extprefs-0.7/configure-12761- allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
pidgin-extprefs-0.7/configure:12762: archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
pidgin-extprefs-0.7/configure-12763-
##############################################
pidgin-extprefs-0.7/configure-12786- # to its proper name (with version) after linking.
pidgin-extprefs-0.7/configure:12787: archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
pidgin-extprefs-0.7/configure-12788-
##############################################
pidgin-extprefs-0.7/configure-12802- allow_undefined_flag_CXX=' -expect_unresolved \*'
pidgin-extprefs-0.7/configure:12803: archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
pidgin-extprefs-0.7/configure:12804: archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
pidgin-extprefs-0.7/configure-12805- echo "-hidden">> $lib.exp~
pidgin-extprefs-0.7/configure:12806: $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~
pidgin-extprefs-0.7/configure-12807- $rm $lib.exp'
##############################################
pidgin-extprefs-0.7/configure-12819- # dependencies.
pidgin-extprefs-0.7/configure:12820: output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
pidgin-extprefs-0.7/configure-12821- ;;
##############################################
pidgin-extprefs-0.7/configure-12824- allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
pidgin-extprefs-0.7/configure:12825: archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
pidgin-extprefs-0.7/configure-12826-
##############################################
pidgin-extprefs-0.7/configure-12886- # Supported since Solaris 2.6 (maybe 2.5.1?)
pidgin-extprefs-0.7/configure:12887: whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract'
pidgin-extprefs-0.7/configure-12888- ;;
##############################################
pidgin-extprefs-0.7/configure-12974- hardcode_shlibpath_var_CXX=no
pidgin-extprefs-0.7/configure:12975: hardcode_libdir_flag_spec_CXX='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
pidgin-extprefs-0.7/configure-12976- hardcode_libdir_separator_CXX=':'
##############################################
pidgin-extprefs-0.7/configure-13046- # eval without this substitution.
pidgin-extprefs-0.7/configure:13047: output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
pidgin-extprefs-0.7/configure-13048-
pidgin-extprefs-0.7/configure:13049: for p in `eval $output_verbose_link_cmd`; do
pidgin-extprefs-0.7/configure-13050- case $p in
##############################################
pidgin-extprefs-0.7/configure-13601- if test "$hard_links" = no; then
pidgin-extprefs-0.7/configure:13602: { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
pidgin-extprefs-0.7/configure:13603:echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
pidgin-extprefs-0.7/configure-13604- need_locks=warn
##############################################
pidgin-extprefs-0.7/configure-13717-if test "$GCC" = yes; then
pidgin-extprefs-0.7/configure:13718: sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
pidgin-extprefs-0.7/configure-13719- if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
##############################################
pidgin-extprefs-0.7/configure-13723- # okay in the real world where ";" in dirpaths is itself problematic.
pidgin-extprefs-0.7/configure:13724: sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
pidgin-extprefs-0.7/configure-13725- else
pidgin-extprefs-0.7/configure:13726: sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
pidgin-extprefs-0.7/configure-13727- fi
##############################################
pidgin-extprefs-0.7/configure-13794- # Create ${libname}_ixlibrary.a entries in /sys/libs.
pidgin-extprefs-0.7/configure:13795: finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
pidgin-extprefs-0.7/configure-13796- ;;
##############################################
pidgin-extprefs-0.7/configure-13827- # DLL is installed to $(libdir)/../bin by postinstall_cmds
pidgin-extprefs-0.7/configure:13828: postinstall_cmds='base_file=`basename \${file}`~
pidgin-extprefs-0.7/configure:13829: dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
pidgin-extprefs-0.7/configure:13830: dldir=$destdir/`dirname \$dlpath`~
pidgin-extprefs-0.7/configure-13831- test -d \$dldir || mkdir -p \$dldir~
##############################################
pidgin-extprefs-0.7/configure-13833- chmod a+x \$dldir/$dlname'
pidgin-extprefs-0.7/configure:13834: postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
pidgin-extprefs-0.7/configure-13835- dlpath=$dir/\$dldll~
##############################################
pidgin-extprefs-0.7/configure-13841- # Cygwin DLLs use 'cyg' prefix rather than 'lib'
pidgin-extprefs-0.7/configure:13842: soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
pidgin-extprefs-0.7/configure-13843- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
##############################################
pidgin-extprefs-0.7/configure-13846- # MinGW DLLs use traditional 'lib' prefix
pidgin-extprefs-0.7/configure:13847: soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
pidgin-extprefs-0.7/configure:13848: sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
pidgin-extprefs-0.7/configure-13849- if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
##############################################
pidgin-extprefs-0.7/configure-13855- # which wouldn't understand a cygwinified path. Ahh.
pidgin-extprefs-0.7/configure:13856: sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
pidgin-extprefs-0.7/configure-13857- else
pidgin-extprefs-0.7/configure:13858: sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
pidgin-extprefs-0.7/configure-13859- fi
##############################################
pidgin-extprefs-0.7/configure-13862- # pw32 DLLs use 'pw' prefix rather than 'lib'
pidgin-extprefs-0.7/configure:13863: library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
pidgin-extprefs-0.7/configure-13864- ;;
##############################################
pidgin-extprefs-0.7/configure-13871- supports_anon_versioning=no
pidgin-extprefs-0.7/configure:13872: case `$LD -v 2>/dev/null` in
pidgin-extprefs-0.7/configure-13873- *\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
##############################################
pidgin-extprefs-0.7/configure-13892- *)
pidgin-extprefs-0.7/configure:13893: library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
pidgin-extprefs-0.7/configure-13894- ;;
##############################################
pidgin-extprefs-0.7/configure-13909- shlibpath_var=DYLD_LIBRARY_PATH
pidgin-extprefs-0.7/configure:13910: shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
pidgin-extprefs-0.7/configure-13911- # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
pidgin-extprefs-0.7/configure-13912- if test "$GCC" = yes; then
pidgin-extprefs-0.7/configure:13913: sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
pidgin-extprefs-0.7/configure-13914- else
##############################################
pidgin-extprefs-0.7/configure-14128- if test -f /etc/ld.so.conf; then
pidgin-extprefs-0.7/configure:14129: lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
pidgin-extprefs-0.7/configure-14130- sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
##############################################
pidgin-extprefs-0.7/configure-14200- shlibpath_var=LD_LIBRARY_PATH
pidgin-extprefs-0.7/configure:14201: if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
pidgin-extprefs-0.7/configure-14202- case $host_os in
##############################################
pidgin-extprefs-0.7/configure-14445- # Double-quote double-evaled strings.
pidgin-extprefs-0.7/configure:14446: eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
pidgin-extprefs-0.7/configure-14447- ;;
pidgin-extprefs-0.7/configure-14448- *)
pidgin-extprefs-0.7/configure:14449: eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
pidgin-extprefs-0.7/configure-14450- ;;
##############################################
pidgin-extprefs-0.7/configure-14455- *'\$0 --fallback-echo"')
pidgin-extprefs-0.7/configure:14456: lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
pidgin-extprefs-0.7/configure-14457- ;;
##############################################
pidgin-extprefs-0.7/configure-14774- # libtool script then.
pidgin-extprefs-0.7/configure:14775: ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
pidgin-extprefs-0.7/configure-14776- if test -f "$ltmain_in"; then
##############################################
pidgin-extprefs-0.7/configure-14883-done
pidgin-extprefs-0.7/configure:14884:cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
pidgin-extprefs-0.7/configure-14885-
##############################################
pidgin-extprefs-0.7/configure-15312- if test "$hard_links" = no; then
pidgin-extprefs-0.7/configure:15313: { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
pidgin-extprefs-0.7/configure:15314:echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
pidgin-extprefs-0.7/configure-15315- need_locks=warn
##############################################
pidgin-extprefs-0.7/configure-15368-done
pidgin-extprefs-0.7/configure:15369:cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
pidgin-extprefs-0.7/configure-15370-
##############################################
pidgin-extprefs-0.7/configure-15406- supports_anon_versioning=no
pidgin-extprefs-0.7/configure:15407: case `$LD -v 2>/dev/null` in
pidgin-extprefs-0.7/configure-15408- *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
##############################################
pidgin-extprefs-0.7/configure-15470- # is EXPORTS), use it as is; otherwise, prepend...
pidgin-extprefs-0.7/configure:15471: archive_expsym_cmds_F77='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
pidgin-extprefs-0.7/configure-15472- cp $export_symbols $output_objdir/$soname.def;
##############################################
pidgin-extprefs-0.7/configure-15493- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
pidgin-extprefs-0.7/configure:15494: archive_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
pidgin-extprefs-0.7/configure:15495: archive_expsym_cmds_F77='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
pidgin-extprefs-0.7/configure-15496- ;;
##############################################
pidgin-extprefs-0.7/configure-15502- pgcc*) # Portland Group C compiler
pidgin-extprefs-0.7/configure:15503: whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
pidgin-extprefs-0.7/configure-15504- tmp_addflag=' $pic_flag'
##############################################
pidgin-extprefs-0.7/configure-15506- pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
pidgin-extprefs-0.7/configure:15507: whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
pidgin-extprefs-0.7/configure-15508- tmp_addflag=' $pic_flag -Mnomain' ;;
##############################################
pidgin-extprefs-0.7/configure-15560- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
pidgin-extprefs-0.7/configure:15561: case `$LD -v 2>&1` in
pidgin-extprefs-0.7/configure-15562- *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
##############################################
pidgin-extprefs-0.7/configure-15576- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
pidgin-extprefs-0.7/configure:15577: hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
pidgin-extprefs-0.7/configure-15578- archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
##############################################
pidgin-extprefs-0.7/configure-15675- # below for broken collect2 doesn't work under 4.3+
pidgin-extprefs-0.7/configure:15676: collect2name=`${CC} -print-prog-name=collect2`
pidgin-extprefs-0.7/configure-15677- if test -f "$collect2name" && \
##############################################
pidgin-extprefs-0.7/configure-15761- hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath"
pidgin-extprefs-0.7/configure:15762: archive_expsym_cmds_F77="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
pidgin-extprefs-0.7/configure-15763- else
##############################################
pidgin-extprefs-0.7/configure-15847- # FIXME: Setting linknames here is a bad hack.
pidgin-extprefs-0.7/configure:15848: archive_cmds_F77='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
pidgin-extprefs-0.7/configure-15849- # The linker will automatically build a .lib file if we build a DLL.
##############################################
pidgin-extprefs-0.7/configure-15852- old_archive_cmds_F77='lib /OUT:$oldlib$oldobjs$old_deplibs'
pidgin-extprefs-0.7/configure:15853: fix_srcfile_path_F77='`cygpath -w "$srcfile"`'
pidgin-extprefs-0.7/configure-15854- enable_shared_with_static_runtimes_F77=yes
##############################################
pidgin-extprefs-0.7/configure-15893- output_verbose_link_cmd='echo'
pidgin-extprefs-0.7/configure:15894: archive_cmds_F77='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
pidgin-extprefs-0.7/configure-15895- module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
##############################################
pidgin-extprefs-0.7/configure-16028- if test "$GCC" = yes; then
pidgin-extprefs-0.7/configure:16029: archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
pidgin-extprefs-0.7/configure-16030- else
pidgin-extprefs-0.7/configure:16031: archive_cmds_F77='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
pidgin-extprefs-0.7/configure-16032- hardcode_libdir_flag_spec_ld_F77='-rpath $libdir'
##############################################
pidgin-extprefs-0.7/configure-16060- hardcode_shlibpath_var_F77=no
pidgin-extprefs-0.7/configure:16061: if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
pidgin-extprefs-0.7/configure-16062- archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
##############################################
pidgin-extprefs-0.7/configure-16090- allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*'
pidgin-extprefs-0.7/configure:16091: archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
pidgin-extprefs-0.7/configure-16092- else
pidgin-extprefs-0.7/configure-16093- allow_undefined_flag_F77=' -expect_unresolved \*'
pidgin-extprefs-0.7/configure:16094: archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
pidgin-extprefs-0.7/configure-16095- fi
##############################################
pidgin-extprefs-0.7/configure-16102- allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*'
pidgin-extprefs-0.7/configure:16103: archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
pidgin-extprefs-0.7/configure-16104- hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
##############################################
pidgin-extprefs-0.7/configure-16106- allow_undefined_flag_F77=' -expect_unresolved \*'
pidgin-extprefs-0.7/configure:16107: archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
pidgin-extprefs-0.7/configure:16108: archive_expsym_cmds_F77='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
pidgin-extprefs-0.7/configure:16109: $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
pidgin-extprefs-0.7/configure-16110-
##############################################
pidgin-extprefs-0.7/configure-16143- *)
pidgin-extprefs-0.7/configure:16144: whole_archive_flag_spec_F77='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
pidgin-extprefs-0.7/configure-16145- esac ;;
##############################################
pidgin-extprefs-0.7/configure-16227- hardcode_shlibpath_var_F77=no
pidgin-extprefs-0.7/configure:16228: hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
pidgin-extprefs-0.7/configure-16229- hardcode_libdir_separator_F77=':'
##############################################
pidgin-extprefs-0.7/configure-16337-if test "$GCC" = yes; then
pidgin-extprefs-0.7/configure:16338: sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
pidgin-extprefs-0.7/configure-16339- if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
##############################################
pidgin-extprefs-0.7/configure-16343- # okay in the real world where ";" in dirpaths is itself problematic.
pidgin-extprefs-0.7/configure:16344: sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
pidgin-extprefs-0.7/configure-16345- else
pidgin-extprefs-0.7/configure:16346: sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
pidgin-extprefs-0.7/configure-16347- fi
##############################################
pidgin-extprefs-0.7/configure-16414- # Create ${libname}_ixlibrary.a entries in /sys/libs.
pidgin-extprefs-0.7/configure:16415: finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
pidgin-extprefs-0.7/configure-16416- ;;
##############################################
pidgin-extprefs-0.7/configure-16447- # DLL is installed to $(libdir)/../bin by postinstall_cmds
pidgin-extprefs-0.7/configure:16448: postinstall_cmds='base_file=`basename \${file}`~
pidgin-extprefs-0.7/configure:16449: dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
pidgin-extprefs-0.7/configure:16450: dldir=$destdir/`dirname \$dlpath`~
pidgin-extprefs-0.7/configure-16451- test -d \$dldir || mkdir -p \$dldir~
##############################################
pidgin-extprefs-0.7/configure-16453- chmod a+x \$dldir/$dlname'
pidgin-extprefs-0.7/configure:16454: postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
pidgin-extprefs-0.7/configure-16455- dlpath=$dir/\$dldll~
##############################################
pidgin-extprefs-0.7/configure-16461- # Cygwin DLLs use 'cyg' prefix rather than 'lib'
pidgin-extprefs-0.7/configure:16462: soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
pidgin-extprefs-0.7/configure-16463- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
##############################################
pidgin-extprefs-0.7/configure-16466- # MinGW DLLs use traditional 'lib' prefix
pidgin-extprefs-0.7/configure:16467: soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
pidgin-extprefs-0.7/configure:16468: sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
pidgin-extprefs-0.7/configure-16469- if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
##############################################
pidgin-extprefs-0.7/configure-16475- # which wouldn't understand a cygwinified path. Ahh.
pidgin-extprefs-0.7/configure:16476: sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
pidgin-extprefs-0.7/configure-16477- else
pidgin-extprefs-0.7/configure:16478: sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
pidgin-extprefs-0.7/configure-16479- fi
##############################################
pidgin-extprefs-0.7/configure-16482- # pw32 DLLs use 'pw' prefix rather than 'lib'
pidgin-extprefs-0.7/configure:16483: library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
pidgin-extprefs-0.7/configure-16484- ;;
##############################################
pidgin-extprefs-0.7/configure-16491- supports_anon_versioning=no
pidgin-extprefs-0.7/configure:16492: case `$LD -v 2>/dev/null` in
pidgin-extprefs-0.7/configure-16493- *\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
##############################################
pidgin-extprefs-0.7/configure-16512- *)
pidgin-extprefs-0.7/configure:16513: library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
pidgin-extprefs-0.7/configure-16514- ;;
##############################################
pidgin-extprefs-0.7/configure-16529- shlibpath_var=DYLD_LIBRARY_PATH
pidgin-extprefs-0.7/configure:16530: shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
pidgin-extprefs-0.7/configure-16531- # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
pidgin-extprefs-0.7/configure-16532- if test "$GCC" = yes; then
pidgin-extprefs-0.7/configure:16533: sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
pidgin-extprefs-0.7/configure-16534- else
##############################################
pidgin-extprefs-0.7/configure-16748- if test -f /etc/ld.so.conf; then
pidgin-extprefs-0.7/configure:16749: lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
pidgin-extprefs-0.7/configure-16750- sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
##############################################
pidgin-extprefs-0.7/configure-16820- shlibpath_var=LD_LIBRARY_PATH
pidgin-extprefs-0.7/configure:16821: if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
pidgin-extprefs-0.7/configure-16822- case $host_os in
##############################################
pidgin-extprefs-0.7/configure-17065- # Double-quote double-evaled strings.
pidgin-extprefs-0.7/configure:17066: eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
pidgin-extprefs-0.7/configure-17067- ;;
pidgin-extprefs-0.7/configure-17068- *)
pidgin-extprefs-0.7/configure:17069: eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
pidgin-extprefs-0.7/configure-17070- ;;
##############################################
pidgin-extprefs-0.7/configure-17075- *'\$0 --fallback-echo"')
pidgin-extprefs-0.7/configure:17076: lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
pidgin-extprefs-0.7/configure-17077- ;;
##############################################
pidgin-extprefs-0.7/configure-17394- # libtool script then.
pidgin-extprefs-0.7/configure:17395: ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
pidgin-extprefs-0.7/configure-17396- if test -f "$ltmain_in"; then
##############################################
pidgin-extprefs-0.7/configure-17470-done
pidgin-extprefs-0.7/configure:17471:cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
pidgin-extprefs-0.7/configure-17472-
##############################################
pidgin-extprefs-0.7/configure-17919- if test "$hard_links" = no; then
pidgin-extprefs-0.7/configure:17920: { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
pidgin-extprefs-0.7/configure:17921:echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
pidgin-extprefs-0.7/configure-17922- need_locks=warn
##############################################
pidgin-extprefs-0.7/configure-17975-done
pidgin-extprefs-0.7/configure:17976:cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
pidgin-extprefs-0.7/configure-17977-
##############################################
pidgin-extprefs-0.7/configure-18013- supports_anon_versioning=no
pidgin-extprefs-0.7/configure:18014: case `$LD -v 2>/dev/null` in
pidgin-extprefs-0.7/configure-18015- *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
##############################################
pidgin-extprefs-0.7/configure-18077- # is EXPORTS), use it as is; otherwise, prepend...
pidgin-extprefs-0.7/configure:18078: archive_expsym_cmds_GCJ='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
pidgin-extprefs-0.7/configure-18079- cp $export_symbols $output_objdir/$soname.def;
##############################################
pidgin-extprefs-0.7/configure-18100- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
pidgin-extprefs-0.7/configure:18101: archive_cmds_GCJ='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
pidgin-extprefs-0.7/configure:18102: archive_expsym_cmds_GCJ='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
pidgin-extprefs-0.7/configure-18103- ;;
##############################################
pidgin-extprefs-0.7/configure-18109- pgcc*) # Portland Group C compiler
pidgin-extprefs-0.7/configure:18110: whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
pidgin-extprefs-0.7/configure-18111- tmp_addflag=' $pic_flag'
##############################################
pidgin-extprefs-0.7/configure-18113- pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
pidgin-extprefs-0.7/configure:18114: whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
pidgin-extprefs-0.7/configure-18115- tmp_addflag=' $pic_flag -Mnomain' ;;
##############################################
pidgin-extprefs-0.7/configure-18167- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
pidgin-extprefs-0.7/configure:18168: case `$LD -v 2>&1` in
pidgin-extprefs-0.7/configure-18169- *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
##############################################
pidgin-extprefs-0.7/configure-18183- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
pidgin-extprefs-0.7/configure:18184: hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
pidgin-extprefs-0.7/configure-18185- archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
##############################################
pidgin-extprefs-0.7/configure-18282- # below for broken collect2 doesn't work under 4.3+
pidgin-extprefs-0.7/configure:18283: collect2name=`${CC} -print-prog-name=collect2`
pidgin-extprefs-0.7/configure-18284- if test -f "$collect2name" && \
##############################################
pidgin-extprefs-0.7/configure-18378- hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath"
pidgin-extprefs-0.7/configure:18379: archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
pidgin-extprefs-0.7/configure-18380- else
##############################################
pidgin-extprefs-0.7/configure-18474- # FIXME: Setting linknames here is a bad hack.
pidgin-extprefs-0.7/configure:18475: archive_cmds_GCJ='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
pidgin-extprefs-0.7/configure-18476- # The linker will automatically build a .lib file if we build a DLL.
##############################################
pidgin-extprefs-0.7/configure-18479- old_archive_cmds_GCJ='lib /OUT:$oldlib$oldobjs$old_deplibs'
pidgin-extprefs-0.7/configure:18480: fix_srcfile_path_GCJ='`cygpath -w "$srcfile"`'
pidgin-extprefs-0.7/configure-18481- enable_shared_with_static_runtimes_GCJ=yes
##############################################
pidgin-extprefs-0.7/configure-18520- output_verbose_link_cmd='echo'
pidgin-extprefs-0.7/configure:18521: archive_cmds_GCJ='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
pidgin-extprefs-0.7/configure-18522- module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
##############################################
pidgin-extprefs-0.7/configure-18655- if test "$GCC" = yes; then
pidgin-extprefs-0.7/configure:18656: archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
pidgin-extprefs-0.7/configure-18657- else
pidgin-extprefs-0.7/configure:18658: archive_cmds_GCJ='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
pidgin-extprefs-0.7/configure-18659- hardcode_libdir_flag_spec_ld_GCJ='-rpath $libdir'
##############################################
pidgin-extprefs-0.7/configure-18687- hardcode_shlibpath_var_GCJ=no
pidgin-extprefs-0.7/configure:18688: if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
pidgin-extprefs-0.7/configure-18689- archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
##############################################
pidgin-extprefs-0.7/configure-18717- allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*'
pidgin-extprefs-0.7/configure:18718: archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
pidgin-extprefs-0.7/configure-18719- else
pidgin-extprefs-0.7/configure-18720- allow_undefined_flag_GCJ=' -expect_unresolved \*'
pidgin-extprefs-0.7/configure:18721: archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
pidgin-extprefs-0.7/configure-18722- fi
##############################################
pidgin-extprefs-0.7/configure-18729- allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*'
pidgin-extprefs-0.7/configure:18730: archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
pidgin-extprefs-0.7/configure-18731- hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
##############################################
pidgin-extprefs-0.7/configure-18733- allow_undefined_flag_GCJ=' -expect_unresolved \*'
pidgin-extprefs-0.7/configure:18734: archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
pidgin-extprefs-0.7/configure:18735: archive_expsym_cmds_GCJ='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
pidgin-extprefs-0.7/configure:18736: $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
pidgin-extprefs-0.7/configure-18737-
##############################################
pidgin-extprefs-0.7/configure-18770- *)
pidgin-extprefs-0.7/configure:18771: whole_archive_flag_spec_GCJ='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
pidgin-extprefs-0.7/configure-18772- esac ;;
##############################################
pidgin-extprefs-0.7/configure-18854- hardcode_shlibpath_var_GCJ=no
pidgin-extprefs-0.7/configure:18855: hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
pidgin-extprefs-0.7/configure-18856- hardcode_libdir_separator_GCJ=':'
##############################################
pidgin-extprefs-0.7/configure-18964-if test "$GCC" = yes; then
pidgin-extprefs-0.7/configure:18965: sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
pidgin-extprefs-0.7/configure-18966- if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
##############################################
pidgin-extprefs-0.7/configure-18970- # okay in the real world where ";" in dirpaths is itself problematic.
pidgin-extprefs-0.7/configure:18971: sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
pidgin-extprefs-0.7/configure-18972- else
pidgin-extprefs-0.7/configure:18973: sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
pidgin-extprefs-0.7/configure-18974- fi
##############################################
pidgin-extprefs-0.7/configure-19041- # Create ${libname}_ixlibrary.a entries in /sys/libs.
pidgin-extprefs-0.7/configure:19042: finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
pidgin-extprefs-0.7/configure-19043- ;;
##############################################
pidgin-extprefs-0.7/configure-19074- # DLL is installed to $(libdir)/../bin by postinstall_cmds
pidgin-extprefs-0.7/configure:19075: postinstall_cmds='base_file=`basename \${file}`~
pidgin-extprefs-0.7/configure:19076: dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
pidgin-extprefs-0.7/configure:19077: dldir=$destdir/`dirname \$dlpath`~
pidgin-extprefs-0.7/configure-19078- test -d \$dldir || mkdir -p \$dldir~
##############################################
pidgin-extprefs-0.7/configure-19080- chmod a+x \$dldir/$dlname'
pidgin-extprefs-0.7/configure:19081: postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
pidgin-extprefs-0.7/configure-19082- dlpath=$dir/\$dldll~
##############################################
pidgin-extprefs-0.7/configure-19088- # Cygwin DLLs use 'cyg' prefix rather than 'lib'
pidgin-extprefs-0.7/configure:19089: soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
pidgin-extprefs-0.7/configure-19090- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
##############################################
pidgin-extprefs-0.7/configure-19093- # MinGW DLLs use traditional 'lib' prefix
pidgin-extprefs-0.7/configure:19094: soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
pidgin-extprefs-0.7/configure:19095: sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
pidgin-extprefs-0.7/configure-19096- if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
##############################################
pidgin-extprefs-0.7/configure-19102- # which wouldn't understand a cygwinified path. Ahh.
pidgin-extprefs-0.7/configure:19103: sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
pidgin-extprefs-0.7/configure-19104- else
pidgin-extprefs-0.7/configure:19105: sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
pidgin-extprefs-0.7/configure-19106- fi
##############################################
pidgin-extprefs-0.7/configure-19109- # pw32 DLLs use 'pw' prefix rather than 'lib'
pidgin-extprefs-0.7/configure:19110: library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
pidgin-extprefs-0.7/configure-19111- ;;
##############################################
pidgin-extprefs-0.7/configure-19118- supports_anon_versioning=no
pidgin-extprefs-0.7/configure:19119: case `$LD -v 2>/dev/null` in
pidgin-extprefs-0.7/configure-19120- *\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
##############################################
pidgin-extprefs-0.7/configure-19139- *)
pidgin-extprefs-0.7/configure:19140: library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
pidgin-extprefs-0.7/configure-19141- ;;
##############################################
pidgin-extprefs-0.7/configure-19156- shlibpath_var=DYLD_LIBRARY_PATH
pidgin-extprefs-0.7/configure:19157: shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
pidgin-extprefs-0.7/configure-19158- # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
pidgin-extprefs-0.7/configure-19159- if test "$GCC" = yes; then
pidgin-extprefs-0.7/configure:19160: sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
pidgin-extprefs-0.7/configure-19161- else
##############################################
pidgin-extprefs-0.7/configure-19375- if test -f /etc/ld.so.conf; then
pidgin-extprefs-0.7/configure:19376: lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
pidgin-extprefs-0.7/configure-19377- sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
##############################################
pidgin-extprefs-0.7/configure-19447- shlibpath_var=LD_LIBRARY_PATH
pidgin-extprefs-0.7/configure:19448: if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
pidgin-extprefs-0.7/configure-19449- case $host_os in
##############################################
pidgin-extprefs-0.7/configure-19692- # Double-quote double-evaled strings.
pidgin-extprefs-0.7/configure:19693: eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
pidgin-extprefs-0.7/configure-19694- ;;
pidgin-extprefs-0.7/configure-19695- *)
pidgin-extprefs-0.7/configure:19696: eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
pidgin-extprefs-0.7/configure-19697- ;;
##############################################
pidgin-extprefs-0.7/configure-19702- *'\$0 --fallback-echo"')
pidgin-extprefs-0.7/configure:19703: lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
pidgin-extprefs-0.7/configure-19704- ;;
##############################################
pidgin-extprefs-0.7/configure-20021- # libtool script then.
pidgin-extprefs-0.7/configure:20022: ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
pidgin-extprefs-0.7/configure-20023- if test -f "$ltmain_in"; then
##############################################
pidgin-extprefs-0.7/configure-20096-done
pidgin-extprefs-0.7/configure:20097:cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
pidgin-extprefs-0.7/configure-20098-
##############################################
pidgin-extprefs-0.7/configure-20172- # Double-quote double-evaled strings.
pidgin-extprefs-0.7/configure:20173: eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
pidgin-extprefs-0.7/configure-20174- ;;
pidgin-extprefs-0.7/configure-20175- *)
pidgin-extprefs-0.7/configure:20176: eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
pidgin-extprefs-0.7/configure-20177- ;;
##############################################
pidgin-extprefs-0.7/configure-20182- *'\$0 --fallback-echo"')
pidgin-extprefs-0.7/configure:20183: lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
pidgin-extprefs-0.7/configure-20184- ;;
##############################################
pidgin-extprefs-0.7/configure-20501- # libtool script then.
pidgin-extprefs-0.7/configure:20502: ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
pidgin-extprefs-0.7/configure-20503- if test -f "$ltmain_in"; then
##############################################
pidgin-extprefs-0.7/configure-20668- ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
pidgin-extprefs-0.7/configure:20669: ac_i=`echo "$ac_i" | sed "$ac_script"`
pidgin-extprefs-0.7/configure-20670- # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
##############################################
pidgin-extprefs-0.7/configure-20826-do
pidgin-extprefs-0.7/configure:20827: if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
pidgin-extprefs-0.7/configure-20828- eval $as_var=C; export $as_var
##############################################
pidgin-extprefs-0.7/configure-20876- test "x$as_lineno_1" != "x$as_lineno_2" &&
pidgin-extprefs-0.7/configure:20877: test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
pidgin-extprefs-0.7/configure-20878-
##############################################
pidgin-extprefs-0.7/configure-20987- esac;
pidgin-extprefs-0.7/configure:20988: case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
pidgin-extprefs-0.7/configure-20989- ???[sx]*):;;*)false;;esac;fi
##############################################
pidgin-extprefs-0.7/configure-21062-configured by $0, generated by GNU Autoconf 2.61,
pidgin-extprefs-0.7/configure:21063: with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
pidgin-extprefs-0.7/configure-21064-
##############################################
pidgin-extprefs-0.7/configure-21082- --*=*)
pidgin-extprefs-0.7/configure:21083: ac_option=`expr "X$1" : 'X\([^=]*\)='`
pidgin-extprefs-0.7/configure:21084: ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
pidgin-extprefs-0.7/configure-21085- ac_shift=:
##############################################
pidgin-extprefs-0.7/configure-21339-
pidgin-extprefs-0.7/configure:21340: if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then
pidgin-extprefs-0.7/configure-21341- break
##############################################
pidgin-extprefs-0.7/configure-21350-
pidgin-extprefs-0.7/configure:21351:ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
pidgin-extprefs-0.7/configure-21352-if test -n "$ac_eof"; then
pidgin-extprefs-0.7/configure:21353: ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
pidgin-extprefs-0.7/configure:21354: ac_eof=`expr $ac_eof + 1`
pidgin-extprefs-0.7/configure-21355-fi
##############################################
pidgin-extprefs-0.7/configure-21402-
pidgin-extprefs-0.7/configure:21403: if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 22; then
pidgin-extprefs-0.7/configure-21404- break
##############################################
pidgin-extprefs-0.7/configure-21413-
pidgin-extprefs-0.7/configure:21414:ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
pidgin-extprefs-0.7/configure-21415-if test -n "$ac_eof"; then
pidgin-extprefs-0.7/configure:21416: ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
pidgin-extprefs-0.7/configure:21417: ac_eof=`expr $ac_eof + 1`
pidgin-extprefs-0.7/configure-21418-fi
##############################################
pidgin-extprefs-0.7/configure-21551- case $as_dir in #(
pidgin-extprefs-0.7/configure:21552: *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
pidgin-extprefs-0.7/configure-21553- *) as_qdir=$as_dir;;
##############################################
pidgin-extprefs-0.7/configure-21589-*)
pidgin-extprefs-0.7/configure:21590: ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
pidgin-extprefs-0.7/configure-21591- # A ".." for each directory in $ac_dir_suffix.
pidgin-extprefs-0.7/configure:21592: ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
pidgin-extprefs-0.7/configure-21593- case $ac_top_builddir_sub in
##############################################
pidgin-extprefs-0.7/configure-21667-
pidgin-extprefs-0.7/configure:21668:# Neutralize VPATH when `$srcdir' = `.'.
pidgin-extprefs-0.7/configure-21669-# Shell code in configure.ac might set extrasub.
##############################################
pidgin-extprefs-0.7/configure-21692-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
pidgin-extprefs-0.7/configure:21693: { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
pidgin-extprefs-0.7/configure:21694: { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
pidgin-extprefs-0.7/configure-21695- { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
##############################################
pidgin-extprefs-0.7/configure-21809- * )
pidgin-extprefs-0.7/configure:21810: _am_stamp_count=`expr $_am_stamp_count + 1` ;;
pidgin-extprefs-0.7/configure-21811- esac
##############################################
pidgin-extprefs-0.7/configure-21846- # Strip MF so we end up with the name of the file.
pidgin-extprefs-0.7/configure:21847: mf=`echo "$mf" | sed -e 's/:.*$//'`
pidgin-extprefs-0.7/configure-21848- # Check whether this is an Automake generated Makefile or not.
##############################################
pidgin-extprefs-0.7/configure-21883- # from the Makefile without running `make'.
pidgin-extprefs-0.7/configure:21884: DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
pidgin-extprefs-0.7/configure-21885- test -z "$DEPDIR" && continue
pidgin-extprefs-0.7/configure:21886: am__include=`sed -n 's/^am__include = //p' < "$mf"`
pidgin-extprefs-0.7/configure-21887- test -z "am__include" && continue
pidgin-extprefs-0.7/configure:21888: am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
pidgin-extprefs-0.7/configure-21889- # When using ansi2knr, U may be empty or an underscore; expand it
pidgin-extprefs-0.7/configure:21890: U=`sed -n 's/^U = //p' < "$mf"`
pidgin-extprefs-0.7/configure-21891- # Find all dependency output files, they are included files with
##############################################
pidgin-extprefs-0.7/configure-21930- case $as_dir in #(
pidgin-extprefs-0.7/configure:21931: *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
pidgin-extprefs-0.7/configure-21932- *) as_qdir=$as_dir;;
##############################################
pidgin-extprefs-0.7/config.guess-40-
pidgin-extprefs-0.7/config.guess:41:me=`echo "$0" | sed -e 's,.*/,,'`
pidgin-extprefs-0.7/config.guess-42-
##############################################
pidgin-extprefs-0.7/config.guess-109-: ${TMPDIR=/tmp} ;
pidgin-extprefs-0.7/config.guess:110: { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
pidgin-extprefs-0.7/config.guess-111- { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
##############################################
pidgin-extprefs-0.7/config.guess-155-EOF
pidgin-extprefs-0.7/config.guess:156: eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep LIBC= | sed -e 's: ::g'`
pidgin-extprefs-0.7/config.guess-157-fi
##############################################
pidgin-extprefs-0.7/config.guess-211- *)
pidgin-extprefs-0.7/config.guess:212: release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
pidgin-extprefs-0.7/config.guess-213- ;;
##############################################
pidgin-extprefs-0.7/config.guess-238- *4.0)
pidgin-extprefs-0.7/config.guess:239: UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
pidgin-extprefs-0.7/config.guess-240- ;;
pidgin-extprefs-0.7/config.guess-241- *5.*)
pidgin-extprefs-0.7/config.guess:242: UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
pidgin-extprefs-0.7/config.guess-243- ;;
##############################################
pidgin-extprefs-0.7/config.guess-248- # types through head -n 1, so we only detect the type of CPU 0.
pidgin-extprefs-0.7/config.guess:249: ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
pidgin-extprefs-0.7/config.guess-250- case "$ALPHA_CPU_TYPE" in
##############################################
pidgin-extprefs-0.7/config.guess-286- # 1.2 uses "1.2" for uname -r.
pidgin-extprefs-0.7/config.guess:287: echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
pidgin-extprefs-0.7/config.guess-288- exit ;;
##############################################
pidgin-extprefs-0.7/config.guess-343- sun4H:SunOS:5.*:*)
pidgin-extprefs-0.7/config.guess:344: echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
pidgin-extprefs-0.7/config.guess-345- exit ;;
pidgin-extprefs-0.7/config.guess-346- sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
pidgin-extprefs-0.7/config.guess:347: echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
pidgin-extprefs-0.7/config.guess-348- exit ;;
pidgin-extprefs-0.7/config.guess-349- i86pc:SunOS:5.*:*)
pidgin-extprefs-0.7/config.guess:350: echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
pidgin-extprefs-0.7/config.guess-351- exit ;;
##############################################
pidgin-extprefs-0.7/config.guess-355- # it's likely to be more like Solaris than SunOS4.
pidgin-extprefs-0.7/config.guess:356: echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
pidgin-extprefs-0.7/config.guess-357- exit ;;
##############################################
pidgin-extprefs-0.7/config.guess-364- # Japanese Language versions have a version number like `4.1.3-JL'.
pidgin-extprefs-0.7/config.guess:365: echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
pidgin-extprefs-0.7/config.guess-366- exit ;;
##############################################
pidgin-extprefs-0.7/config.guess-370- sun*:*:4.2BSD:*)
pidgin-extprefs-0.7/config.guess:371: UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
pidgin-extprefs-0.7/config.guess-372- test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
##############################################
pidgin-extprefs-0.7/config.guess-452- $CC_FOR_BUILD -o $dummy $dummy.c &&
pidgin-extprefs-0.7/config.guess:453: dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
pidgin-extprefs-0.7/config.guess:454: SYSTEM_NAME=`$dummy $dummyarg` &&
pidgin-extprefs-0.7/config.guess-455- { echo "$SYSTEM_NAME"; exit; }
##############################################
pidgin-extprefs-0.7/config.guess-508- *:IRIX*:*:*)
pidgin-extprefs-0.7/config.guess:509: echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
pidgin-extprefs-0.7/config.guess-510- exit ;;
##############################################
pidgin-extprefs-0.7/config.guess-538-EOF
pidgin-extprefs-0.7/config.guess:539: if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
pidgin-extprefs-0.7/config.guess-540- then
##############################################
pidgin-extprefs-0.7/config.guess-551- *:AIX:*:[45])
pidgin-extprefs-0.7/config.guess:552: IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
pidgin-extprefs-0.7/config.guess-553- if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
##############################################
pidgin-extprefs-0.7/config.guess-586- 9000/[34678]??:HP-UX:*:*)
pidgin-extprefs-0.7/config.guess:587: HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
pidgin-extprefs-0.7/config.guess-588- case "${UNAME_MACHINE}" in
##############################################
pidgin-extprefs-0.7/config.guess-640-EOF
pidgin-extprefs-0.7/config.guess:641: (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
pidgin-extprefs-0.7/config.guess-642- test -z "$HP_ARCH" && HP_ARCH=hppa
##############################################
pidgin-extprefs-0.7/config.guess-668- ia64:HP-UX:*:*)
pidgin-extprefs-0.7/config.guess:669: HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
pidgin-extprefs-0.7/config.guess-670- echo ia64-hp-hpux${HPUX_REV}
##############################################
pidgin-extprefs-0.7/config.guess-698-EOF
pidgin-extprefs-0.7/config.guess:699: $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
pidgin-extprefs-0.7/config.guess-700- { echo "$SYSTEM_NAME"; exit; }
##############################################
pidgin-extprefs-0.7/config.guess-769- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
pidgin-extprefs-0.7/config.guess:770: FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
pidgin-extprefs-0.7/config.guess-771- echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
##############################################
pidgin-extprefs-0.7/config.guess-774- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
pidgin-extprefs-0.7/config.guess:775: FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
pidgin-extprefs-0.7/config.guess-776- echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
##############################################
pidgin-extprefs-0.7/config.guess-789- pc98)
pidgin-extprefs-0.7/config.guess:790: echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
pidgin-extprefs-0.7/config.guess-791- amd64)
pidgin-extprefs-0.7/config.guess:792: echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
pidgin-extprefs-0.7/config.guess-793- *)
pidgin-extprefs-0.7/config.guess:794: echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
pidgin-extprefs-0.7/config.guess-795- esac
##############################################
pidgin-extprefs-0.7/config.guess-834- prep*:SunOS:5.*:*)
pidgin-extprefs-0.7/config.guess:835: echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
pidgin-extprefs-0.7/config.guess-836- exit ;;
##############################################
pidgin-extprefs-0.7/config.guess-838- # the GNU system
pidgin-extprefs-0.7/config.guess:839: echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
pidgin-extprefs-0.7/config.guess-840- exit ;;
##############################################
pidgin-extprefs-0.7/config.guess-842- # other systems with GNU libc and userland
pidgin-extprefs-0.7/config.guess:843: echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
pidgin-extprefs-0.7/config.guess-844- exit ;;
##############################################
pidgin-extprefs-0.7/config.guess-1069- i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
pidgin-extprefs-0.7/config.guess:1070: UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
pidgin-extprefs-0.7/config.guess-1071- if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
##############################################
pidgin-extprefs-0.7/config.guess-1301- *:DragonFly:*:*)
pidgin-extprefs-0.7/config.guess:1302: echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
pidgin-extprefs-0.7/config.guess-1303- exit ;;
##############################################
pidgin-extprefs-0.7/config.guess-1314- i*86:skyos:*:*)
pidgin-extprefs-0.7/config.guess:1315: echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
pidgin-extprefs-0.7/config.guess-1316- exit ;;
##############################################
pidgin-extprefs-0.7/config.guess-1439-
pidgin-extprefs-0.7/config.guess:1440:$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
pidgin-extprefs-0.7/config.guess-1441- { echo "$SYSTEM_NAME"; exit; }
##############################################
pidgin-extprefs-0.7/install-sh-211- fi
pidgin-extprefs-0.7/install-sh:212: cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
pidgin-extprefs-0.7/install-sh-213- *)
##############################################
pidgin-extprefs-0.7/install-sh-263- dstdir=$dst
pidgin-extprefs-0.7/install-sh:264: dst=$dstdir/`basename "$src"`
pidgin-extprefs-0.7/install-sh-265- dstdir_status=0
##############################################
pidgin-extprefs-0.7/install-sh-345- # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
pidgin-extprefs-0.7/install-sh:346: ls_ld_tmpdir=`ls -ld "$tmpdir"`
pidgin-extprefs-0.7/install-sh-347- case $ls_ld_tmpdir in
##############################################
pidgin-extprefs-0.7/install-sh-352- $mkdirprog -m$different_mode -p -- "$tmpdir" && {
pidgin-extprefs-0.7/install-sh:353: ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
pidgin-extprefs-0.7/install-sh-354- test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
##############################################
pidgin-extprefs-0.7/install-sh-419- case $prefix in
pidgin-extprefs-0.7/install-sh:420: *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
pidgin-extprefs-0.7/install-sh-421- *) qprefix=$prefix;;
##############################################
pidgin-extprefs-0.7/config.sub-56-
pidgin-extprefs-0.7/config.sub:57:me=`echo "$0" | sed -e 's,.*/,,'`
pidgin-extprefs-0.7/config.sub-58-
##############################################
pidgin-extprefs-0.7/config.sub-120-# Here we must recognize all the valid KERNEL-OS combinations.
pidgin-extprefs-0.7/config.sub:121:maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
pidgin-extprefs-0.7/config.sub-122-case $maybe_os in
##############################################
pidgin-extprefs-0.7/config.sub-126- os=-$maybe_os
pidgin-extprefs-0.7/config.sub:127: basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
pidgin-extprefs-0.7/config.sub-128- ;;
pidgin-extprefs-0.7/config.sub-129- *)
pidgin-extprefs-0.7/config.sub:130: basic_machine=`echo $1 | sed 's/-[^-]*$//'`
pidgin-extprefs-0.7/config.sub-131- if [ $basic_machine != $1 ]
pidgin-extprefs-0.7/config.sub:132: then os=`echo $1 | sed 's/.*-/-/'`
pidgin-extprefs-0.7/config.sub-133- else os=; fi
##############################################
pidgin-extprefs-0.7/config.sub-177- os=-sco5v6
pidgin-extprefs-0.7/config.sub:178: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
pidgin-extprefs-0.7/config.sub-179- ;;
##############################################
pidgin-extprefs-0.7/config.sub-181- os=-sco3.2v5
pidgin-extprefs-0.7/config.sub:182: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
pidgin-extprefs-0.7/config.sub-183- ;;
##############################################
pidgin-extprefs-0.7/config.sub-185- os=-sco3.2v4
pidgin-extprefs-0.7/config.sub:186: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
pidgin-extprefs-0.7/config.sub-187- ;;
pidgin-extprefs-0.7/config.sub-188- -sco3.2.[4-9]*)
pidgin-extprefs-0.7/config.sub:189: os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
pidgin-extprefs-0.7/config.sub:190: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
pidgin-extprefs-0.7/config.sub-191- ;;
##############################################
pidgin-extprefs-0.7/config.sub-193- # Don't forget version if it is 3.2v4 or newer.
pidgin-extprefs-0.7/config.sub:194: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
pidgin-extprefs-0.7/config.sub-195- ;;
##############################################
pidgin-extprefs-0.7/config.sub-197- # Don't forget version if it is 3.2v4 or newer.
pidgin-extprefs-0.7/config.sub:198: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
pidgin-extprefs-0.7/config.sub-199- ;;
##############################################
pidgin-extprefs-0.7/config.sub-201- os=-sco3.2v2
pidgin-extprefs-0.7/config.sub:202: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
pidgin-extprefs-0.7/config.sub-203- ;;
pidgin-extprefs-0.7/config.sub-204- -udk*)
pidgin-extprefs-0.7/config.sub:205: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
pidgin-extprefs-0.7/config.sub-206- ;;
##############################################
pidgin-extprefs-0.7/config.sub-208- os=-isc2.2
pidgin-extprefs-0.7/config.sub:209: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
pidgin-extprefs-0.7/config.sub-210- ;;
##############################################
pidgin-extprefs-0.7/config.sub-214- -isc*)
pidgin-extprefs-0.7/config.sub:215: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
pidgin-extprefs-0.7/config.sub-216- ;;
##############################################
pidgin-extprefs-0.7/config.sub-220- -ptx*)
pidgin-extprefs-0.7/config.sub:221: basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
pidgin-extprefs-0.7/config.sub-222- ;;
pidgin-extprefs-0.7/config.sub-223- -windowsnt*)
pidgin-extprefs-0.7/config.sub:224: os=`echo $os | sed -e 's/windowsnt/winnt/'`
pidgin-extprefs-0.7/config.sub-225- ;;
##############################################
pidgin-extprefs-0.7/config.sub-309- *-*-*)
pidgin-extprefs-0.7/config.sub:310: echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
pidgin-extprefs-0.7/config.sub-311- exit 1
##############################################
pidgin-extprefs-0.7/config.sub-411- amd64-*)
pidgin-extprefs-0.7/config.sub:412: basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
pidgin-extprefs-0.7/config.sub-413- ;;
##############################################
pidgin-extprefs-0.7/config.sub-632- i*86v32)
pidgin-extprefs-0.7/config.sub:633: basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
pidgin-extprefs-0.7/config.sub-634- os=-sysv32
##############################################
pidgin-extprefs-0.7/config.sub-636- i*86v4*)
pidgin-extprefs-0.7/config.sub:637: basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
pidgin-extprefs-0.7/config.sub-638- os=-sysv4
##############################################
pidgin-extprefs-0.7/config.sub-640- i*86v)
pidgin-extprefs-0.7/config.sub:641: basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
pidgin-extprefs-0.7/config.sub-642- os=-sysv
##############################################
pidgin-extprefs-0.7/config.sub-644- i*86sol2)
pidgin-extprefs-0.7/config.sub:645: basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
pidgin-extprefs-0.7/config.sub-646- os=-solaris2
##############################################
pidgin-extprefs-0.7/config.sub-710- mips3*-*)
pidgin-extprefs-0.7/config.sub:711: basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
pidgin-extprefs-0.7/config.sub-712- ;;
pidgin-extprefs-0.7/config.sub-713- mips3*)
pidgin-extprefs-0.7/config.sub:714: basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
pidgin-extprefs-0.7/config.sub-715- ;;
##############################################
pidgin-extprefs-0.7/config.sub-728- ms1-*)
pidgin-extprefs-0.7/config.sub:729: basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
pidgin-extprefs-0.7/config.sub-730- ;;
##############################################
pidgin-extprefs-0.7/config.sub-841- pc98-*)
pidgin-extprefs-0.7/config.sub:842: basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
pidgin-extprefs-0.7/config.sub-843- ;;
##############################################
pidgin-extprefs-0.7/config.sub-856- pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
pidgin-extprefs-0.7/config.sub:857: basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
pidgin-extprefs-0.7/config.sub-858- ;;
pidgin-extprefs-0.7/config.sub-859- pentiumpro-* | p6-* | 6x86-* | athlon-*)
pidgin-extprefs-0.7/config.sub:860: basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
pidgin-extprefs-0.7/config.sub-861- ;;
pidgin-extprefs-0.7/config.sub-862- pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
pidgin-extprefs-0.7/config.sub:863: basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
pidgin-extprefs-0.7/config.sub-864- ;;
pidgin-extprefs-0.7/config.sub-865- pentium4-*)
pidgin-extprefs-0.7/config.sub:866: basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
pidgin-extprefs-0.7/config.sub-867- ;;
##############################################
pidgin-extprefs-0.7/config.sub-874- ;;
pidgin-extprefs-0.7/config.sub:875: ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
pidgin-extprefs-0.7/config.sub-876- ;;
##############################################
pidgin-extprefs-0.7/config.sub-880- ppcle-* | powerpclittle-*)
pidgin-extprefs-0.7/config.sub:881: basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
pidgin-extprefs-0.7/config.sub-882- ;;
##############################################
pidgin-extprefs-0.7/config.sub-884- ;;
pidgin-extprefs-0.7/config.sub:885: ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
pidgin-extprefs-0.7/config.sub-886- ;;
##############################################
pidgin-extprefs-0.7/config.sub-890- ppc64le-* | powerpc64little-*)
pidgin-extprefs-0.7/config.sub:891: basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
pidgin-extprefs-0.7/config.sub-892- ;;
##############################################
pidgin-extprefs-0.7/config.sub-1167- *)
pidgin-extprefs-0.7/config.sub:1168: echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
pidgin-extprefs-0.7/config.sub-1169- exit 1
##############################################
pidgin-extprefs-0.7/config.sub-1175- *-digital*)
pidgin-extprefs-0.7/config.sub:1176: basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
pidgin-extprefs-0.7/config.sub-1177- ;;
pidgin-extprefs-0.7/config.sub-1178- *-commodore*)
pidgin-extprefs-0.7/config.sub:1179: basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
pidgin-extprefs-0.7/config.sub-1180- ;;
##############################################
pidgin-extprefs-0.7/config.sub-1193- -solaris1 | -solaris1.*)
pidgin-extprefs-0.7/config.sub:1194: os=`echo $os | sed -e 's|solaris1|sunos4|'`
pidgin-extprefs-0.7/config.sub-1195- ;;
##############################################
pidgin-extprefs-0.7/config.sub-1205- -gnu/linux*)
pidgin-extprefs-0.7/config.sub:1206: os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
pidgin-extprefs-0.7/config.sub-1207- ;;
##############################################
pidgin-extprefs-0.7/config.sub-1249- -nto*)
pidgin-extprefs-0.7/config.sub:1250: os=`echo $os | sed -e 's|nto|nto-qnx|'`
pidgin-extprefs-0.7/config.sub-1251- ;;
##############################################
pidgin-extprefs-0.7/config.sub-1256- -mac*)
pidgin-extprefs-0.7/config.sub:1257: os=`echo $os | sed -e 's|mac|macos|'`
pidgin-extprefs-0.7/config.sub-1258- ;;
##############################################
pidgin-extprefs-0.7/config.sub-1262- -linux*)
pidgin-extprefs-0.7/config.sub:1263: os=`echo $os | sed -e 's|linux|linux-gnu|'`
pidgin-extprefs-0.7/config.sub-1264- ;;
pidgin-extprefs-0.7/config.sub-1265- -sunos5*)
pidgin-extprefs-0.7/config.sub:1266: os=`echo $os | sed -e 's|sunos5|solaris2|'`
pidgin-extprefs-0.7/config.sub-1267- ;;
pidgin-extprefs-0.7/config.sub-1268- -sunos6*)
pidgin-extprefs-0.7/config.sub:1269: os=`echo $os | sed -e 's|sunos6|solaris3|'`
pidgin-extprefs-0.7/config.sub-1270- ;;
##############################################
pidgin-extprefs-0.7/config.sub-1317- -sinix5.*)
pidgin-extprefs-0.7/config.sub:1318: os=`echo $os | sed -e 's|sinix|sysv|'`
pidgin-extprefs-0.7/config.sub-1319- ;;
##############################################
pidgin-extprefs-0.7/config.sub-1368- # Get rid of the `-' at the beginning of $os.
pidgin-extprefs-0.7/config.sub:1369: os=`echo $os | sed 's/[^-]*-//'`
pidgin-extprefs-0.7/config.sub:1370: echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
pidgin-extprefs-0.7/config.sub-1371- exit 1
##############################################
pidgin-extprefs-0.7/config.sub-1613- esac
pidgin-extprefs-0.7/config.sub:1614: basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
pidgin-extprefs-0.7/config.sub-1615- ;;
##############################################
pidgin-extprefs-0.7/missing-131- # Could not run --version or --help. This is probably someone
pidgin-extprefs-0.7/missing:132: # running `$TOOL --version' or `$TOOL --help' to check whether
pidgin-extprefs-0.7/missing-133- # $TOOL exists and not knowing $TOOL uses missing.
##############################################
pidgin-extprefs-0.7/missing-165- from any GNU archive site."
pidgin-extprefs-0.7/missing:166: files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
pidgin-extprefs-0.7/missing-167- test -z "$files" && files="config.h"
##############################################
pidgin-extprefs-0.7/missing-194- proper tools for further handling them.
pidgin-extprefs-0.7/missing:195: You can get \`$1' as part of \`Autoconf' from any GNU
pidgin-extprefs-0.7/missing-196- archive site."
pidgin-extprefs-0.7/missing-197-
pidgin-extprefs-0.7/missing:198: file=`echo "$*" | sed -n "$sed_output"`
pidgin-extprefs-0.7/missing:199: test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
pidgin-extprefs-0.7/missing-200- if test -f "$file"; then
##############################################
pidgin-extprefs-0.7/missing-223- *.y)
pidgin-extprefs-0.7/missing:224: SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
pidgin-extprefs-0.7/missing-225- if test -f "$SRCFILE"; then
##############################################
pidgin-extprefs-0.7/missing-227- fi
pidgin-extprefs-0.7/missing:228: SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
pidgin-extprefs-0.7/missing-229- if test -f "$SRCFILE"; then
##############################################
pidgin-extprefs-0.7/missing-253- *.l)
pidgin-extprefs-0.7/missing:254: SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
pidgin-extprefs-0.7/missing-255- if test -f "$SRCFILE"; then
##############################################
pidgin-extprefs-0.7/missing-272-
pidgin-extprefs-0.7/missing:273: file=`echo "$*" | sed -n "$sed_output"`
pidgin-extprefs-0.7/missing:274: test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
pidgin-extprefs-0.7/missing-275- if test -f "$file"; then
##############################################
pidgin-extprefs-0.7/missing-292- # The file to touch is that specified with -o ...
pidgin-extprefs-0.7/missing:293: file=`echo "$*" | sed -n "$sed_output"`
pidgin-extprefs-0.7/missing:294: test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
pidgin-extprefs-0.7/missing-295- if test -z "$file"; then
pidgin-extprefs-0.7/missing-296- # ... or it is the one specified with @setfilename ...
pidgin-extprefs-0.7/missing:297: infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
pidgin-extprefs-0.7/missing-298- file=`sed -n '
##############################################
pidgin-extprefs-0.7/missing-304- # ... or it is derived from the source name (dir/f.texi becomes f.info)
pidgin-extprefs-0.7/missing:305: test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
pidgin-extprefs-0.7/missing-306- fi
##############################################
pidgin-extprefs-0.7/missing-328- *o*)
pidgin-extprefs-0.7/missing:329: firstarg=`echo "$firstarg" | sed s/o//`
pidgin-extprefs-0.7/missing-330- tar "$firstarg" "$@" && exit 0
##############################################
pidgin-extprefs-0.7/missing-334- *h*)
pidgin-extprefs-0.7/missing:335: firstarg=`echo "$firstarg" | sed s/h//`
pidgin-extprefs-0.7/missing-336- tar "$firstarg" "$@" && exit 0
##############################################
pidgin-extprefs-0.7/Makefile.in-283- dot_seen=no; \
pidgin-extprefs-0.7/Makefile.in:284: target=`echo $@ | sed s/-recursive//`; \
pidgin-extprefs-0.7/Makefile.in-285- list='$(SUBDIRS)'; for subdir in $$list; do \
##############################################
pidgin-extprefs-0.7/Makefile.in-318- rev="$$rev ."; \
pidgin-extprefs-0.7/Makefile.in:319: target=`echo $@ | sed s/-recursive//`; \
pidgin-extprefs-0.7/Makefile.in-320- for subdir in $$rev; do \
##############################################
pidgin-extprefs-0.7/Makefile.in-392-GTAGS:
pidgin-extprefs-0.7/Makefile.in:393: here=`$(am__cd) $(top_builddir) && pwd` \
pidgin-extprefs-0.7/Makefile.in-394- && cd $(top_srcdir) \
##############################################
pidgin-extprefs-0.7/Makefile.in-402- test -d $(distdir) || mkdir $(distdir)
pidgin-extprefs-0.7/Makefile.in:403: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
pidgin-extprefs-0.7/Makefile.in:404: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
pidgin-extprefs-0.7/Makefile.in-405- list='$(DISTFILES)'; \
##############################################
pidgin-extprefs-0.7/Makefile.in-416- if test -d $$d/$$file; then \
pidgin-extprefs-0.7/Makefile.in:417: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
pidgin-extprefs-0.7/Makefile.in-418- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
##############################################
pidgin-extprefs-0.7/Makefile.in-432- || exit 1; \
pidgin-extprefs-0.7/Makefile.in:433: distdir=`$(am__cd) $(distdir) && pwd`; \
pidgin-extprefs-0.7/Makefile.in:434: top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
pidgin-extprefs-0.7/Makefile.in-435- (cd $$subdir && \
##############################################
pidgin-extprefs-0.7/Makefile.in-494- chmod a-w $(distdir)
pidgin-extprefs-0.7/Makefile.in:495: dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
pidgin-extprefs-0.7/Makefile.in-496- && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
##############################################
pidgin-extprefs-0.7/Makefile.in-525- @cd $(distuninstallcheck_dir) \
pidgin-extprefs-0.7/Makefile.in:526: && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
pidgin-extprefs-0.7/Makefile.in-527- || { echo "ERROR: files left after uninstall:" ; \
##############################################
pidgin-extprefs-0.7/Makefile.in-537- fi
pidgin-extprefs-0.7/Makefile.in:538: @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
pidgin-extprefs-0.7/Makefile.in-539- || { echo "ERROR: files left in build directory after distclean:" ; \