Flawfinder version 2.0.10, (C) 2001-2019 David A. Wheeler.
Number of rules (primarily dangerous function names) in C/C++ ruleset: 223
Examining data/digitools-1.03/it8705.c
Examining data/digitools-1.03/i2c-dev.h
Examining data/digitools-1.03/sndctrl.h
Examining data/digitools-1.03/digifan.h
Examining data/digitools-1.03/digiwake.c
Examining data/digitools-1.03/digitools.h
Examining data/digitools-1.03/digipanel.c
Examining data/digitools-1.03/digiwake.h
Examining data/digitools-1.03/oz263.h
Examining data/digitools-1.03/sndctrl.c
Examining data/digitools-1.03/digipanel.h
Examining data/digitools-1.03/oz263.c
Examining data/digitools-1.03/it8705.h
Examining data/digitools-1.03/digitools.c
Examining data/digitools-1.03/ozedit.h
Examining data/digitools-1.03/ozedit.c
Examining data/digitools-1.03/digifan.c
FINAL RESULTS:
data/digitools-1.03/digipanel.c:323:9: [4] (buffer) sprintf:
Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or
vsnprintf.
sprintf(digits, "%s%s", current_temp, ascii_time);
data/digitools-1.03/digitools.c:56:10: [4] (buffer) strcat:
Does not check for buffer overflows when concatenating to destination
[MS-banned] (CWE-120). Consider using strcat_s, strncat, strlcat, or
snprintf (warning: strncat is easily misused).
strcat(strcat(pid_file_name,prog_name),".pid");
data/digitools-1.03/digitools.c:100:10: [4] (buffer) strcat:
Does not check for buffer overflows when concatenating to destination
[MS-banned] (CWE-120). Consider using strcat_s, strncat, strlcat, or
snprintf (warning: strncat is easily misused).
strcat(strcat(pid_file_name,prog_name),".pid");
data/digitools-1.03/digitools.c:111:12: [4] (buffer) strcat:
Does not check for buffer overflows when concatenating to destination
[MS-banned] (CWE-120). Consider using strcat_s, strncat, strlcat, or
snprintf (warning: strncat is easily misused).
strcat(strcat(procfile_name,pid_read),"/stat");
data/digitools-1.03/oz263.c:382:5: [4] (buffer) sprintf:
Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or
vsnprintf.
sprintf(n, "%s/%s/name", sysfs, de->d_name);
data/digitools-1.03/oz263.c:395:5: [4] (buffer) sprintf:
Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or
vsnprintf.
sprintf(n, "%s/%s/device/name", sysfs, de->d_name);
data/digitools-1.03/oz263.c:410:5: [4] (buffer) sprintf:
Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or
vsnprintf.
sprintf(n, "%s/%s/device", sysfs, de->d_name);
data/digitools-1.03/oz263.c:421:9: [4] (buffer) sprintf:
Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or
vsnprintf.
sprintf(n, "%s/%s/device/%s/name",
data/digitools-1.03/digifan.c:199:15: [3] (buffer) getopt_long:
Some older implementations do not protect against internal buffer overflows
(CWE-120, CWE-20). Check implementation on installation, or limit the size
of all string inputs.
if ((ch = getopt_long(argc, argv, "m:g:o:ais:rkvh",
data/digitools-1.03/digipanel.c:155:15: [3] (buffer) getopt_long:
Some older implementations do not protect against internal buffer overflows
(CWE-120, CWE-20). Check implementation on installation, or limit the size
of all string inputs.
if ((ch = getopt_long(argc, argv, "d:D:tlskvh",
data/digitools-1.03/digipanel.c:398:15: [3] (buffer) getopt_long:
Some older implementations do not protect against internal buffer overflows
(CWE-120, CWE-20). Check implementation on installation, or limit the size
of all string inputs.
if ((ch = getopt_long(argc, argv, "r:c:vh",
data/digitools-1.03/digiwake.c:95:17: [3] (buffer) getopt_long:
Some older implementations do not protect against internal buffer overflows
(CWE-120, CWE-20). Check implementation on installation, or limit the size
of all string inputs.
if ((ch = getopt_long(argc, argv, "rwvh",
data/digitools-1.03/ozedit.c:127:15: [3] (buffer) getopt_long:
Some older implementations do not protect against internal buffer overflows
(CWE-120, CWE-20). Check implementation on installation, or limit the size
of all string inputs.
if ((ch = getopt_long(argc, argv, "mrvh",
data/digitools-1.03/digifan.c:285:13: [2] (integer) atoi:
Unless checked, the resulting number can exceed the expected range
(CWE-190). If source untrusted, check both minimum and maximum, even if the
input had no minus sign (large numbers can roll over into negative number;
consider saving to an unsigned value if that is intended).
if (atoi(optarg) < OFF)
data/digitools-1.03/digifan.c:289:50: [2] (integer) atoi:
Unless checked, the resulting number can exceed the expected range
(CWE-190). If source untrusted, check both minimum and maximum, even if the
input had no minus sign (large numbers can roll over into negative number;
consider saving to an unsigned value if that is intended).
"Minimum fan speed: %d%%\n", atoi(optarg),OFF);
data/digitools-1.03/digifan.c:293:18: [2] (integer) atoi:
Unless checked, the resulting number can exceed the expected range
(CWE-190). If source untrusted, check both minimum and maximum, even if the
input had no minus sign (large numbers can roll over into negative number;
consider saving to an unsigned value if that is intended).
else if (atoi(optarg)>100)
data/digitools-1.03/digifan.c:297:51: [2] (integer) atoi:
Unless checked, the resulting number can exceed the expected range
(CWE-190). If source untrusted, check both minimum and maximum, even if the
input had no minus sign (large numbers can roll over into negative number;
consider saving to an unsigned value if that is intended).
"Maximum fan speed: 100%%\n", atoi(optarg));
data/digitools-1.03/digifan.c:303:26: [2] (integer) atoi:
Unless checked, the resulting number can exceed the expected range
(CWE-190). If source untrusted, check both minimum and maximum, even if the
input had no minus sign (large numbers can roll over into negative number;
consider saving to an unsigned value if that is intended).
next_state = ( atoi(optarg) * 0x7f) / 100;
data/digitools-1.03/digipanel.c:111:10: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
extern char digits[7];
data/digitools-1.03/digipanel.c:126:3: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char ascii_time[5] = {0x0f, 0x0f, 0x0f, 0x0f,'\0'};
data/digitools-1.03/digipanel.c:127:3: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char current_temp[3] = {0x0f, 0x0f,'\0'};
data/digitools-1.03/digipanel.c:307:9: [2] (buffer) sprintf:
Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or
vsnprintf. Risk is low because the source has a constant maximum length.
sprintf(current_temp, "%02X", it87_get_temp());
data/digitools-1.03/digipanel.c:357:11: [2] (buffer) sprintf:
Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or
vsnprintf. Risk is low because the source has a constant maximum length.
sprintf(digits, "%02ld ",
data/digitools-1.03/digitools.c:39:1: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char digits[7];
data/digitools-1.03/digitools.c:49:3: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char prog_full_name[20];
data/digitools-1.03/digitools.c:55:3: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char pid_file_name[20]="/tmp/";
data/digitools-1.03/digitools.c:56:3: [2] (buffer) strcat:
Does not check for buffer overflows when concatenating to destination
[MS-banned] (CWE-120). Consider using strcat_s, strncat, strlcat, or
snprintf (warning: strncat is easily misused). Risk is low because the
source is a constant string.
strcat(strcat(pid_file_name,prog_name),".pid");
data/digitools-1.03/digitools.c:70:10: [2] (misc) fopen:
Check when opening files - can an attacker redirect it (via symlinks),
force the opening of special file type (e.g., device files), move things
around to create a race condition, control its ancestors, or change its
contents? (CWE-362).
fpid=fopen(pid_file_name,"w");
data/digitools-1.03/digitools.c:90:3: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char procfile_name[20]="/proc/";
data/digitools-1.03/digitools.c:91:3: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char proc_contents[20];
data/digitools-1.03/digitools.c:93:3: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char prog_full_name[20];
data/digitools-1.03/digitools.c:99:3: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char pid_file_name[20]="/tmp/";
data/digitools-1.03/digitools.c:100:3: [2] (buffer) strcat:
Does not check for buffer overflows when concatenating to destination
[MS-banned] (CWE-120). Consider using strcat_s, strncat, strlcat, or
snprintf (warning: strncat is easily misused). Risk is low because the
source is a constant string.
strcat(strcat(pid_file_name,prog_name),".pid");
data/digitools-1.03/digitools.c:103:3: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char pid_read[20];
data/digitools-1.03/digitools.c:105:8: [2] (misc) fopen:
Check when opening files - can an attacker redirect it (via symlinks),
force the opening of special file type (e.g., device files), move things
around to create a race condition, control its ancestors, or change its
contents? (CWE-362).
fpid=fopen(pid_file_name,"r");
data/digitools-1.03/digitools.c:111:5: [2] (buffer) strcat:
Does not check for buffer overflows when concatenating to destination
[MS-banned] (CWE-120). Consider using strcat_s, strncat, strlcat, or
snprintf (warning: strncat is easily misused). Risk is low because the
source is a constant string.
strcat(strcat(procfile_name,pid_read),"/stat");
data/digitools-1.03/digitools.c:112:11: [2] (misc) fopen:
Check when opening files - can an attacker redirect it (via symlinks),
force the opening of special file type (e.g., device files), move things
around to create a race condition, control its ancestors, or change its
contents? (CWE-362).
fproc=fopen(procfile_name,"r");
data/digitools-1.03/digitools.c:119:17: [2] (integer) atoi:
Unless checked, the resulting number can exceed the expected range
(CWE-190). If source untrusted, check both minimum and maximum, even if the
input had no minus sign (large numbers can roll over into negative number;
consider saving to an unsigned value if that is intended).
if(kill(atoi(pid_read),SIGTERM) == -1)
data/digitools-1.03/digitools.c:120:16: [2] (integer) atoi:
Unless checked, the resulting number can exceed the expected range
(CWE-190). If source untrusted, check both minimum and maximum, even if the
input had no minus sign (large numbers can roll over into negative number;
consider saving to an unsigned value if that is intended).
kill(atoi(pid_read),SIGKILL);
data/digitools-1.03/oz263.c:54:8: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
extern char digits[7];
data/digitools-1.03/oz263.c:146:30: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
void oz263_display(int file, char digits[6], LED led, PP pp,
data/digitools-1.03/oz263.c:221:3: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char filename1[20];
data/digitools-1.03/oz263.c:222:3: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char filename2[20];
data/digitools-1.03/oz263.c:223:3: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char filename3[20];
data/digitools-1.03/oz263.c:243:3: [2] (buffer) sprintf:
Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or
vsnprintf. Risk is low because the source has a constant maximum length.
sprintf(filename1,"/dev/i2c-%d",i2cbus);
data/digitools-1.03/oz263.c:244:3: [2] (buffer) sprintf:
Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or
vsnprintf. Risk is low because the source has a constant maximum length.
sprintf(filename2,"/dev/i2c%d",i2cbus);
data/digitools-1.03/oz263.c:245:3: [2] (buffer) sprintf:
Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or
vsnprintf. Risk is low because the source has a constant maximum length.
sprintf(filename3,"/dev/i2c/%d",i2cbus);
data/digitools-1.03/oz263.c:246:22: [2] (misc) open:
Check when opening files - can an attacker redirect it (via symlinks),
force the opening of special file type (e.g., device files), move things
around to create a race condition, control its ancestors, or change its
contents? (CWE-362).
if ((file_i2cbus = open(filename1,O_RDWR)) < 0)
data/digitools-1.03/oz263.c:247:24: [2] (misc) open:
Check when opening files - can an attacker redirect it (via symlinks),
force the opening of special file type (e.g., device files), move things
around to create a race condition, control its ancestors, or change its
contents? (CWE-362).
if ((file_i2cbus = open(filename2,O_RDWR)) < 0)
data/digitools-1.03/oz263.c:248:26: [2] (misc) open:
Check when opening files - can an attacker redirect it (via symlinks),
force the opening of special file type (e.g., device files), move things
around to create a race condition, control its ancestors, or change its
contents? (CWE-362).
if ((file_i2cbus = open(filename3,O_RDWR)) < 0)
data/digitools-1.03/oz263.c:303:3: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char s[100];
data/digitools-1.03/oz263.c:306:3: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char dev[NAME_MAX], fstype[NAME_MAX], sysfs[NAME_MAX], n[NAME_MAX];
data/digitools-1.03/oz263.c:315:14: [2] (misc) fopen:
Check when opening files - can an attacker redirect it (via symlinks),
force the opening of special file type (e.g., device files), move things
around to create a race condition, control its ancestors, or change its
contents? (CWE-362).
if((fptr = fopen("/proc/bus/i2c", "r")))
data/digitools-1.03/oz263.c:330:16: [2] (integer) atoi:
Unless checked, the resulting number can exceed the expected range
(CWE-190). If source untrusted, check both minimum and maximum, even if the
input had no minus sign (large numbers can roll over into negative number;
consider saving to an unsigned value if that is intended).
return atoi((i2cdev+4));
data/digitools-1.03/oz263.c:337:15: [2] (misc) fopen:
Check when opening files - can an attacker redirect it (via symlinks),
force the opening of special file type (e.g., device files), move things
around to create a race condition, control its ancestors, or change its
contents? (CWE-362).
if ((fptr = fopen("/proc/mounts", "r")) == NULL)
data/digitools-1.03/oz263.c:365:3: [2] (buffer) strcat:
Does not check for buffer overflows when concatenating to destination
[MS-banned] (CWE-120). Consider using strcat_s, strncat, strlcat, or
snprintf (warning: strncat is easily misused). Risk is low because the
source is a constant string.
strcat(sysfs, "/class/i2c-dev");
data/digitools-1.03/oz263.c:383:16: [2] (misc) fopen:
Check when opening files - can an attacker redirect it (via symlinks),
force the opening of special file type (e.g., device files), move things
around to create a race condition, control its ancestors, or change its
contents? (CWE-362).
if((fptr = fopen(n, "r")) != NULL)
data/digitools-1.03/oz263.c:391:16: [2] (integer) atoi:
Unless checked, the resulting number can exceed the expected range
(CWE-190). If source untrusted, check both minimum and maximum, even if the
input had no minus sign (large numbers can roll over into negative number;
consider saving to an unsigned value if that is intended).
return atoi((de->d_name+4));
data/digitools-1.03/oz263.c:396:16: [2] (misc) fopen:
Check when opening files - can an attacker redirect it (via symlinks),
force the opening of special file type (e.g., device files), move things
around to create a race condition, control its ancestors, or change its
contents? (CWE-362).
if((fptr = fopen(n, "r")) != NULL)
data/digitools-1.03/oz263.c:404:16: [2] (integer) atoi:
Unless checked, the resulting number can exceed the expected range
(CWE-190). If source untrusted, check both minimum and maximum, even if the
input had no minus sign (large numbers can roll over into negative number;
consider saving to an unsigned value if that is intended).
return atoi((de->d_name+4));
data/digitools-1.03/oz263.c:423:20: [2] (misc) fopen:
Check when opening files - can an attacker redirect it (via symlinks),
force the opening of special file type (e.g., device files), move things
around to create a race condition, control its ancestors, or change its
contents? (CWE-362).
if((fptr = fopen(n, "r")) != NULL)
data/digitools-1.03/oz263.c:431:20: [2] (integer) atoi:
Unless checked, the resulting number can exceed the expected range
(CWE-190). If source untrusted, check both minimum and maximum, even if the
input had no minus sign (large numbers can roll over into negative number;
consider saving to an unsigned value if that is intended).
return atoi((dde->d_name+4));
data/digitools-1.03/oz263.c:457:3: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char x[120];
data/digitools-1.03/oz263.h:111:30: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
void oz263_display(int file, char digits[6], LED led, PP pp,
data/digitools-1.03/ozedit.c:105:3: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char buffer[20], *ptr;
data/digitools-1.03/digipanel.c:167:9: [1] (buffer) strncpy:
Easily used incorrectly; doesn't always \0-terminate or check for invalid
pointers [MS-banned] (CWE-120).
strncpy(digits, optarg, 6);
data/digitools-1.03/digipanel.c:361:11: [1] (obsolete) usleep:
This C routine is considered obsolete (as opposed to the shell command by
the same name). The interaction of this function with SIGALRM and other
timer functions such as sleep(), alarm(), setitimer(), and nanosleep() is
unspecified (CWE-676). Use nanosleep(2) or setitimer(2) instead.
usleep(VOL_UPDATE_INTERVAL_MS * 1000); /* Delay of 500ms*/
data/digitools-1.03/digipanel.c:368:5: [1] (obsolete) usleep:
This C routine is considered obsolete (as opposed to the shell command by
the same name). The interaction of this function with SIGALRM and other
timer functions such as sleep(), alarm(), setitimer(), and nanosleep() is
unspecified (CWE-676). Use nanosleep(2) or setitimer(2) instead.
usleep(VOL_UPDATE_INTERVAL_MS * 1000); /* Delay of 500ms*/
data/digitools-1.03/digitools.c:51:3: [1] (buffer) strncpy:
Easily used incorrectly; doesn't always \0-terminate or check for invalid
pointers [MS-banned] (CWE-120).
strncpy(prog_full_name,prog,sizeof(prog_full_name));
data/digitools-1.03/digitools.c:95:3: [1] (buffer) strncpy:
Easily used incorrectly; doesn't always \0-terminate or check for invalid
pointers [MS-banned] (CWE-120).
strncpy(prog_full_name,prog,sizeof(prog_full_name));
data/digitools-1.03/oz263.c:62:3: [1] (obsolete) usleep:
This C routine is considered obsolete (as opposed to the shell command by
the same name). The interaction of this function with SIGALRM and other
timer functions such as sleep(), alarm(), setitimer(), and nanosleep() is
unspecified (CWE-676). Use nanosleep(2) or setitimer(2) instead.
usleep(I2C_TRANSACTION_DELAY_MS);
data/digitools-1.03/oz263.c:71:3: [1] (obsolete) usleep:
This C routine is considered obsolete (as opposed to the shell command by
the same name). The interaction of this function with SIGALRM and other
timer functions such as sleep(), alarm(), setitimer(), and nanosleep() is
unspecified (CWE-676). Use nanosleep(2) or setitimer(2) instead.
usleep(I2C_TRANSACTION_DELAY_MS);
data/digitools-1.03/oz263.c:80:3: [1] (obsolete) usleep:
This C routine is considered obsolete (as opposed to the shell command by
the same name). The interaction of this function with SIGALRM and other
timer functions such as sleep(), alarm(), setitimer(), and nanosleep() is
unspecified (CWE-676). Use nanosleep(2) or setitimer(2) instead.
usleep(I2C_TRANSACTION_DELAY_MS);
ANALYSIS SUMMARY:
Hits = 73
Lines analyzed = 3040 in approximately 0.12 seconds (25061 lines/second)
Physical Source Lines of Code (SLOC) = 2147
Hits@level = [0] 114 [1] 8 [2] 52 [3] 5 [4] 8 [5] 0
Hits@level+ = [0+] 187 [1+] 73 [2+] 65 [3+] 13 [4+] 8 [5+] 0
Hits/KSLOC@level+ = [0+] 87.0983 [1+] 34.0009 [2+] 30.2748 [3+] 6.05496 [4+] 3.72613 [5+] 0
Dot directories skipped = 1 (--followdotdir overrides)
Minimum risk level = 1
Not every hit is necessarily a security vulnerability.
There may be other security vulnerabilities; review your code!
See 'Secure Programming HOWTO'
(https://dwheeler.com/secure-programs) for more information.