Flawfinder version 2.0.10, (C) 2001-2019 David A. Wheeler. Number of rules (primarily dangerous function names) in C/C++ ruleset: 223 Examining data/leptonlib-1.79.0/prog/livre_orient.c Examining data/leptonlib-1.79.0/prog/arabic_lines.c Examining data/leptonlib-1.79.0/prog/colorseg_reg.c Examining data/leptonlib-1.79.0/prog/settest.c Examining data/leptonlib-1.79.0/prog/bytea_reg.c Examining data/leptonlib-1.79.0/prog/recog_bootnum2.c Examining data/leptonlib-1.79.0/prog/concatpdf.c Examining data/leptonlib-1.79.0/prog/psio_reg.c Examining data/leptonlib-1.79.0/prog/pixcomp_reg.c Examining data/leptonlib-1.79.0/prog/speckle_reg.c Examining data/leptonlib-1.79.0/prog/rotate2_reg.c Examining data/leptonlib-1.79.0/prog/colorsegtest.c Examining data/leptonlib-1.79.0/prog/dewarptest4.c Examining data/leptonlib-1.79.0/prog/rotateorthtest1.c Examining data/leptonlib-1.79.0/prog/blend4_reg.c Examining data/leptonlib-1.79.0/prog/rotate_it.c Examining data/leptonlib-1.79.0/prog/comparepixa.c Examining data/leptonlib-1.79.0/prog/hashtest.c Examining data/leptonlib-1.79.0/prog/overlap_reg.c Examining data/leptonlib-1.79.0/prog/rectangle_reg.c Examining data/leptonlib-1.79.0/prog/pdfio1_reg.c Examining data/leptonlib-1.79.0/prog/rotate1_reg.c Examining data/leptonlib-1.79.0/prog/recogtest1.c Examining data/leptonlib-1.79.0/prog/boxa4_reg.c Examining data/leptonlib-1.79.0/prog/pageseg_reg.c Examining data/leptonlib-1.79.0/prog/boxa1_reg.c Examining data/leptonlib-1.79.0/prog/cctest1.c Examining data/leptonlib-1.79.0/prog/subpixel_reg.c Examining data/leptonlib-1.79.0/prog/livre_pageseg.c Examining data/leptonlib-1.79.0/prog/jbrankhaus.c Examining data/leptonlib-1.79.0/prog/binarize_reg.c Examining data/leptonlib-1.79.0/prog/italic_reg.c Examining data/leptonlib-1.79.0/prog/autogentest1.c Examining data/leptonlib-1.79.0/prog/dwamorph1_reg.c Examining data/leptonlib-1.79.0/prog/writemtiff.c Examining data/leptonlib-1.79.0/prog/recog_bootnum3.c Examining data/leptonlib-1.79.0/prog/dewarptest1.c Examining data/leptonlib-1.79.0/prog/printtiff.c Examining data/leptonlib-1.79.0/prog/colorize_reg.c Examining data/leptonlib-1.79.0/prog/misctest1.c Examining data/leptonlib-1.79.0/prog/printimage.c Examining data/leptonlib-1.79.0/prog/colormorph_reg.c Examining data/leptonlib-1.79.0/prog/binarize_set.c Examining data/leptonlib-1.79.0/prog/binmorph1_reg.c Examining data/leptonlib-1.79.0/prog/scale_it.c Examining data/leptonlib-1.79.0/prog/numaranktest.c Examining data/leptonlib-1.79.0/prog/textorient.c Examining data/leptonlib-1.79.0/prog/threshnorm_reg.c Examining data/leptonlib-1.79.0/prog/croptest.c Examining data/leptonlib-1.79.0/prog/converttopdf.c Examining data/leptonlib-1.79.0/prog/flipselgen.c Examining data/leptonlib-1.79.0/prog/colorquant_reg.c Examining data/leptonlib-1.79.0/prog/bilinear_reg.c Examining data/leptonlib-1.79.0/prog/sudokutest.c Examining data/leptonlib-1.79.0/prog/dwamorph2_reg.c Examining data/leptonlib-1.79.0/prog/watershed_reg.c Examining data/leptonlib-1.79.0/prog/binmorph4_reg.c Examining data/leptonlib-1.79.0/prog/nearline_reg.c Examining data/leptonlib-1.79.0/prog/rbtreetest.c Examining data/leptonlib-1.79.0/prog/autogentest2.c Examining data/leptonlib-1.79.0/prog/rasteropip_reg.c Examining data/leptonlib-1.79.0/prog/ptra2_reg.c Examining data/leptonlib-1.79.0/prog/otsutest2.c Examining data/leptonlib-1.79.0/prog/morphseq_reg.c Examining data/leptonlib-1.79.0/prog/pixserial_reg.c Examining data/leptonlib-1.79.0/prog/digitprep1.c Examining data/leptonlib-1.79.0/prog/dwalinear.3.c Examining data/leptonlib-1.79.0/prog/fhmtauto_reg.c Examining data/leptonlib-1.79.0/prog/convertfilestopdf.c Examining data/leptonlib-1.79.0/prog/rankbin_reg.c Examining data/leptonlib-1.79.0/prog/grayquant_reg.c Examining data/leptonlib-1.79.0/prog/jbclass_reg.c Examining data/leptonlib-1.79.0/prog/edge_reg.c Examining data/leptonlib-1.79.0/prog/autogen.137.c Examining data/leptonlib-1.79.0/prog/numa1_reg.c Examining data/leptonlib-1.79.0/prog/recogtest5.c Examining data/leptonlib-1.79.0/prog/dwalinearlow.3.c Examining data/leptonlib-1.79.0/prog/bincompare.c Examining data/leptonlib-1.79.0/prog/graymorphtest.c Examining data/leptonlib-1.79.0/prog/find_colorregions.c Examining data/leptonlib-1.79.0/prog/pta_reg.c Examining data/leptonlib-1.79.0/prog/rotatetest1.c Examining data/leptonlib-1.79.0/prog/projection_reg.c Examining data/leptonlib-1.79.0/prog/reducetest.c Examining data/leptonlib-1.79.0/prog/yuvtest.c Examining data/leptonlib-1.79.0/prog/convertformat.c Examining data/leptonlib-1.79.0/prog/jpegio_reg.c Examining data/leptonlib-1.79.0/prog/imagetops.c Examining data/leptonlib-1.79.0/prog/partitiontest.c Examining data/leptonlib-1.79.0/prog/croptext.c Examining data/leptonlib-1.79.0/prog/printsplitimage.c Examining data/leptonlib-1.79.0/prog/runlengthtest.c Examining data/leptonlib-1.79.0/prog/pngio_reg.c Examining data/leptonlib-1.79.0/prog/string_reg.c Examining data/leptonlib-1.79.0/prog/alltests_reg.c Examining data/leptonlib-1.79.0/prog/pixa2_reg.c Examining data/leptonlib-1.79.0/prog/coloring_reg.c Examining data/leptonlib-1.79.0/prog/webpio_reg.c Examining data/leptonlib-1.79.0/prog/fpixcontours.c Examining data/leptonlib-1.79.0/prog/bilateral2_reg.c Examining data/leptonlib-1.79.0/prog/livre_tophat.c Examining data/leptonlib-1.79.0/prog/hardlight_reg.c Examining data/leptonlib-1.79.0/prog/xformbox_reg.c Examining data/leptonlib-1.79.0/prog/convertfilestops.c Examining data/leptonlib-1.79.0/prog/livre_seedgen.c Examining data/leptonlib-1.79.0/prog/displayboxes_on_pixa.c Examining data/leptonlib-1.79.0/prog/pagesegtest2.c Examining data/leptonlib-1.79.0/prog/alphaops_reg.c Examining data/leptonlib-1.79.0/prog/modifyhuesat.c Examining data/leptonlib-1.79.0/prog/recogtest3.c Examining data/leptonlib-1.79.0/prog/dna_reg.c Examining data/leptonlib-1.79.0/prog/boxa3_reg.c Examining data/leptonlib-1.79.0/prog/pixa1_reg.c Examining data/leptonlib-1.79.0/prog/quadtree_reg.c Examining data/leptonlib-1.79.0/prog/removecmap.c Examining data/leptonlib-1.79.0/prog/skewtest.c Examining data/leptonlib-1.79.0/prog/fpix1_reg.c Examining data/leptonlib-1.79.0/prog/recogtest4.c Examining data/leptonlib-1.79.0/prog/showedges.c Examining data/leptonlib-1.79.0/prog/lowaccess_reg.c Examining data/leptonlib-1.79.0/prog/otsutest1.c Examining data/leptonlib-1.79.0/prog/trctest.c Examining data/leptonlib-1.79.0/prog/pixaatest.c Examining data/leptonlib-1.79.0/prog/ccbordtest.c Examining data/leptonlib-1.79.0/prog/conversion_reg.c Examining data/leptonlib-1.79.0/prog/mtiff_reg.c Examining data/leptonlib-1.79.0/prog/graphicstest.c Examining data/leptonlib-1.79.0/prog/rotateorth_reg.c Examining data/leptonlib-1.79.0/prog/buffertest.c Examining data/leptonlib-1.79.0/prog/comparepages.c Examining data/leptonlib-1.79.0/prog/blend2_reg.c Examining data/leptonlib-1.79.0/prog/jp2kio_reg.c Examining data/leptonlib-1.79.0/prog/paint_reg.c Examining data/leptonlib-1.79.0/prog/adaptmap_reg.c Examining data/leptonlib-1.79.0/prog/pixalloc_reg.c Examining data/leptonlib-1.79.0/prog/pixtile_reg.c Examining data/leptonlib-1.79.0/prog/distance_reg.c Examining data/leptonlib-1.79.0/prog/locminmax_reg.c Examining data/leptonlib-1.79.0/prog/recogsort.c Examining data/leptonlib-1.79.0/prog/blackwhite_reg.c Examining data/leptonlib-1.79.0/prog/expand_reg.c Examining data/leptonlib-1.79.0/prog/falsecolor_reg.c Examining data/leptonlib-1.79.0/prog/displaypix.c Examining data/leptonlib-1.79.0/prog/lowsat_reg.c Examining data/leptonlib-1.79.0/prog/affine_reg.c Examining data/leptonlib-1.79.0/prog/shear1_reg.c Examining data/leptonlib-1.79.0/prog/percolatetest.c Examining data/leptonlib-1.79.0/prog/shear2_reg.c Examining data/leptonlib-1.79.0/prog/translate_reg.c Examining data/leptonlib-1.79.0/prog/listtest.c Examining data/leptonlib-1.79.0/prog/fcombautogen.c Examining data/leptonlib-1.79.0/prog/colorcontent_reg.c Examining data/leptonlib-1.79.0/prog/newspaper_reg.c Examining data/leptonlib-1.79.0/prog/alphaxform_reg.c Examining data/leptonlib-1.79.0/prog/barcodetest.c Examining data/leptonlib-1.79.0/prog/cmapquant_reg.c Examining data/leptonlib-1.79.0/prog/findpattern2.c Examining data/leptonlib-1.79.0/prog/webpanimio_reg.c Examining data/leptonlib-1.79.0/prog/binmorph5_reg.c Examining data/leptonlib-1.79.0/prog/autogen.137.h Examining data/leptonlib-1.79.0/prog/corrupttest.c Examining data/leptonlib-1.79.0/prog/blend1_reg.c Examining data/leptonlib-1.79.0/prog/wordsinorder.c Examining data/leptonlib-1.79.0/prog/binarizefiles.c Examining data/leptonlib-1.79.0/prog/livre_hmt.c Examining data/leptonlib-1.79.0/prog/pixafileinfo.c Examining data/leptonlib-1.79.0/prog/blend5_reg.c Examining data/leptonlib-1.79.0/prog/binmorph3_reg.c Examining data/leptonlib-1.79.0/prog/checkerboard_reg.c Examining data/leptonlib-1.79.0/prog/recogtest6.c Examining data/leptonlib-1.79.0/prog/histoduptest.c Examining data/leptonlib-1.79.0/prog/sharptest.c Examining data/leptonlib-1.79.0/prog/binmorph2_reg.c Examining data/leptonlib-1.79.0/prog/blendcmaptest.c Examining data/leptonlib-1.79.0/prog/replacebytes.c Examining data/leptonlib-1.79.0/prog/pixmem_reg.c Examining data/leptonlib-1.79.0/prog/convertsegfilestops.c Examining data/leptonlib-1.79.0/prog/plottest.c Examining data/leptonlib-1.79.0/prog/renderfonts.c Examining data/leptonlib-1.79.0/prog/grayfill_reg.c Examining data/leptonlib-1.79.0/prog/projective_reg.c Examining data/leptonlib-1.79.0/prog/adaptmap_dark.c Examining data/leptonlib-1.79.0/prog/extrema_reg.c Examining data/leptonlib-1.79.0/prog/insert_reg.c Examining data/leptonlib-1.79.0/prog/cleanpdf.c Examining data/leptonlib-1.79.0/prog/lightcolortest.c Examining data/leptonlib-1.79.0/prog/smallpix_reg.c Examining data/leptonlib-1.79.0/prog/splitimage2pdf.c Examining data/leptonlib-1.79.0/prog/lineremoval_reg.c Examining data/leptonlib-1.79.0/prog/dither_reg.c Examining data/leptonlib-1.79.0/prog/enhance_reg.c Examining data/leptonlib-1.79.0/prog/baseline_reg.c Examining data/leptonlib-1.79.0/prog/boxa2_reg.c Examining data/leptonlib-1.79.0/prog/kernel_reg.c Examining data/leptonlib-1.79.0/prog/fileinfo.c Examining data/leptonlib-1.79.0/prog/adaptnorm_reg.c Examining data/leptonlib-1.79.0/prog/dewarprules.c Examining data/leptonlib-1.79.0/prog/pdfseg_reg.c Examining data/leptonlib-1.79.0/prog/morphtest1.c Examining data/leptonlib-1.79.0/prog/ptra1_reg.c Examining data/leptonlib-1.79.0/prog/scaletest2.c Examining data/leptonlib-1.79.0/prog/genfonts_reg.c Examining data/leptonlib-1.79.0/prog/fmorphautogen.c Examining data/leptonlib-1.79.0/prog/warpertest.c Examining data/leptonlib-1.79.0/prog/label_reg.c Examining data/leptonlib-1.79.0/prog/rankhisto_reg.c Examining data/leptonlib-1.79.0/prog/displayboxa.c Examining data/leptonlib-1.79.0/prog/histotest.c Examining data/leptonlib-1.79.0/prog/seedspread_reg.c Examining data/leptonlib-1.79.0/prog/findpattern_reg.c Examining data/leptonlib-1.79.0/prog/maze_reg.c Examining data/leptonlib-1.79.0/prog/convolve_reg.c Examining data/leptonlib-1.79.0/prog/conncomp_reg.c Examining data/leptonlib-1.79.0/prog/graymorph1_reg.c Examining data/leptonlib-1.79.0/prog/dewarptest2.c Examining data/leptonlib-1.79.0/prog/numa2_reg.c Examining data/leptonlib-1.79.0/prog/htmlviewer.c Examining data/leptonlib-1.79.0/prog/findpattern1.c Examining data/leptonlib-1.79.0/prog/findpattern3.c Examining data/leptonlib-1.79.0/prog/rank_reg.c Examining data/leptonlib-1.79.0/prog/iomisc_reg.c Examining data/leptonlib-1.79.0/prog/livre_makefigs.c Examining data/leptonlib-1.79.0/prog/texturefill_reg.c Examining data/leptonlib-1.79.0/prog/gifio_reg.c Examining data/leptonlib-1.79.0/prog/heap_reg.c Examining data/leptonlib-1.79.0/prog/dewarptest3.c Examining data/leptonlib-1.79.0/prog/pixadisp_reg.c Examining data/leptonlib-1.79.0/prog/gammatest.c Examining data/leptonlib-1.79.0/prog/fpix2_reg.c Examining data/leptonlib-1.79.0/prog/dwalineargen.c Examining data/leptonlib-1.79.0/prog/pnmio_reg.c Examining data/leptonlib-1.79.0/prog/ccthin1_reg.c Examining data/leptonlib-1.79.0/prog/rotatefastalt.c Examining data/leptonlib-1.79.0/prog/multitype_reg.c Examining data/leptonlib-1.79.0/prog/logicops_reg.c Examining data/leptonlib-1.79.0/prog/writetext_reg.c Examining data/leptonlib-1.79.0/prog/selio_reg.c Examining data/leptonlib-1.79.0/prog/jbcorrelation.c Examining data/leptonlib-1.79.0/prog/livre_adapt.c Examining data/leptonlib-1.79.0/prog/contrasttest.c Examining data/leptonlib-1.79.0/prog/fhmtautogen.c Examining data/leptonlib-1.79.0/prog/convertsegfilestopdf.c Examining data/leptonlib-1.79.0/prog/scaletest1.c Examining data/leptonlib-1.79.0/prog/rasterop_reg.c Examining data/leptonlib-1.79.0/prog/skew_reg.c Examining data/leptonlib-1.79.0/prog/cornertest.c Examining data/leptonlib-1.79.0/prog/arithtest.c Examining data/leptonlib-1.79.0/prog/converttops.c Examining data/leptonlib-1.79.0/prog/blend3_reg.c Examining data/leptonlib-1.79.0/prog/maketile.c Examining data/leptonlib-1.79.0/prog/xtractprotos.c Examining data/leptonlib-1.79.0/prog/jbwords.c Examining data/leptonlib-1.79.0/prog/ioformats_reg.c Examining data/leptonlib-1.79.0/prog/messagetest.c Examining data/leptonlib-1.79.0/prog/dewarp_reg.c Examining data/leptonlib-1.79.0/prog/dewarptest5.c Examining data/leptonlib-1.79.0/prog/smoothedge_reg.c Examining data/leptonlib-1.79.0/prog/maptest.c Examining data/leptonlib-1.79.0/prog/deskew_it.c Examining data/leptonlib-1.79.0/prog/splitcomp_reg.c Examining data/leptonlib-1.79.0/prog/comparetest.c Examining data/leptonlib-1.79.0/prog/partifytest.c Examining data/leptonlib-1.79.0/prog/displaypixa.c Examining data/leptonlib-1.79.0/prog/underlinetest.c Examining data/leptonlib-1.79.0/prog/pagesegtest1.c Examining data/leptonlib-1.79.0/prog/warper_reg.c Examining data/leptonlib-1.79.0/prog/scaleandtile.c Examining data/leptonlib-1.79.0/prog/psioseg_reg.c Examining data/leptonlib-1.79.0/prog/fmorphauto_reg.c Examining data/leptonlib-1.79.0/prog/findcorners_reg.c Examining data/leptonlib-1.79.0/prog/recogtest7.c Examining data/leptonlib-1.79.0/prog/paintmask_reg.c Examining data/leptonlib-1.79.0/prog/flipdetect_reg.c Examining data/leptonlib-1.79.0/prog/bilateral1_reg.c Examining data/leptonlib-1.79.0/prog/compfilter_reg.c Examining data/leptonlib-1.79.0/prog/scale_reg.c Examining data/leptonlib-1.79.0/prog/ccthin2_reg.c Examining data/leptonlib-1.79.0/prog/sorttest.c Examining data/leptonlib-1.79.0/prog/colorspace_reg.c Examining data/leptonlib-1.79.0/prog/converttogray.c Examining data/leptonlib-1.79.0/prog/pdfio2_reg.c Examining data/leptonlib-1.79.0/prog/findbinding.c Examining data/leptonlib-1.79.0/prog/wordboxes_reg.c Examining data/leptonlib-1.79.0/prog/files_reg.c Examining data/leptonlib-1.79.0/prog/recog_bootnum1.c Examining data/leptonlib-1.79.0/prog/recogtest2.c Examining data/leptonlib-1.79.0/prog/seedfilltest.c Examining data/leptonlib-1.79.0/prog/compare_reg.c Examining data/leptonlib-1.79.0/prog/sheartest.c Examining data/leptonlib-1.79.0/prog/graymorph2_reg.c Examining data/leptonlib-1.79.0/prog/colormask_reg.c Examining data/leptonlib-1.79.0/prog/equal_reg.c Examining data/leptonlib-1.79.0/src/pnmio.c Examining data/leptonlib-1.79.0/src/dewarp.h Examining data/leptonlib-1.79.0/src/baseline.c Examining data/leptonlib-1.79.0/src/bbuffer.c Examining data/leptonlib-1.79.0/src/warper.c Examining data/leptonlib-1.79.0/src/jp2kheaderstub.c Examining data/leptonlib-1.79.0/src/pdfio2.c Examining data/leptonlib-1.79.0/src/morphseq.c Examining data/leptonlib-1.79.0/src/rotateshear.c Examining data/leptonlib-1.79.0/src/bilinear.c Examining data/leptonlib-1.79.0/src/dewarp2.c Examining data/leptonlib-1.79.0/src/environ.h Examining data/leptonlib-1.79.0/src/numafunc1.c Examining data/leptonlib-1.79.0/src/pixacc.c Examining data/leptonlib-1.79.0/src/gifiostub.c Examining data/leptonlib-1.79.0/src/graymorph.c Examining data/leptonlib-1.79.0/src/stack.c Examining data/leptonlib-1.79.0/src/partition.c Examining data/leptonlib-1.79.0/src/bbuffer.h Examining data/leptonlib-1.79.0/src/sudoku.c Examining data/leptonlib-1.79.0/src/pdfio2stub.c Examining data/leptonlib-1.79.0/src/psio1stub.c Examining data/leptonlib-1.79.0/src/queue.h Examining data/leptonlib-1.79.0/src/ccbord.h Examining data/leptonlib-1.79.0/src/fpix2.c Examining data/leptonlib-1.79.0/src/ccthin.c Examining data/leptonlib-1.79.0/src/flipdetect.c Examining data/leptonlib-1.79.0/src/zlibmemstub.c Examining data/leptonlib-1.79.0/src/maze.c Examining data/leptonlib-1.79.0/src/sarray2.c Examining data/leptonlib-1.79.0/src/readbarcode.c Examining data/leptonlib-1.79.0/src/encoding.c Examining data/leptonlib-1.79.0/src/recogident.c Examining data/leptonlib-1.79.0/src/binreduce.c Examining data/leptonlib-1.79.0/src/colorcontent.c Examining data/leptonlib-1.79.0/src/skew.c Examining data/leptonlib-1.79.0/src/pixabasic.c Examining data/leptonlib-1.79.0/src/allheaders.h Examining data/leptonlib-1.79.0/src/pixtiling.c Examining data/leptonlib-1.79.0/src/pix5.c Examining data/leptonlib-1.79.0/src/dwacomb.2.c Examining data/leptonlib-1.79.0/src/boxfunc2.c Examining data/leptonlib-1.79.0/src/ptafunc1.c Examining data/leptonlib-1.79.0/src/rbtree.c Examining data/leptonlib-1.79.0/src/psio1.c Examining data/leptonlib-1.79.0/src/webpanimiostub.c Examining data/leptonlib-1.79.0/src/correlscore.c Examining data/leptonlib-1.79.0/src/pix.h Examining data/leptonlib-1.79.0/src/leptwin.h Examining data/leptonlib-1.79.0/src/bootnumgen4.c Examining data/leptonlib-1.79.0/src/jbclass.c Examining data/leptonlib-1.79.0/src/webpio.c Examining data/leptonlib-1.79.0/src/bmpiostub.c Examining data/leptonlib-1.79.0/src/bardecode.c Examining data/leptonlib-1.79.0/src/binarize.c Examining data/leptonlib-1.79.0/src/bilateral.c Examining data/leptonlib-1.79.0/src/bootnumgen1.c Examining data/leptonlib-1.79.0/src/stack.h Examining data/leptonlib-1.79.0/src/pixlabel.c Examining data/leptonlib-1.79.0/src/grayquant.c Examining data/leptonlib-1.79.0/src/spixio.c Examining data/leptonlib-1.79.0/src/enhance.c Examining data/leptonlib-1.79.0/src/classapp.c Examining data/leptonlib-1.79.0/src/gplot.c Examining data/leptonlib-1.79.0/src/gifio.c Examining data/leptonlib-1.79.0/src/rotateam.c Examining data/leptonlib-1.79.0/src/ccbord.c Examining data/leptonlib-1.79.0/src/scale2.c Examining data/leptonlib-1.79.0/src/utils2.c Examining data/leptonlib-1.79.0/src/imageio.h Examining data/leptonlib-1.79.0/src/bootnumgen2.c Examining data/leptonlib-1.79.0/src/colormap.c Examining data/leptonlib-1.79.0/src/edge.c Examining data/leptonlib-1.79.0/src/dewarp4.c Examining data/leptonlib-1.79.0/src/arrayaccess.h Examining data/leptonlib-1.79.0/src/fmorphgenlow.1.c Examining data/leptonlib-1.79.0/src/fmorphauto.c Examining data/leptonlib-1.79.0/src/ptabasic.c Examining data/leptonlib-1.79.0/src/selgen.c Examining data/leptonlib-1.79.0/src/stringcode.h Examining data/leptonlib-1.79.0/src/sarray1.c Examining data/leptonlib-1.79.0/src/watershed.c Examining data/leptonlib-1.79.0/src/ptra.c Examining data/leptonlib-1.79.0/src/map.c Examining data/leptonlib-1.79.0/src/bmpio.c Examining data/leptonlib-1.79.0/src/pixconv.c Examining data/leptonlib-1.79.0/src/strokes.c Examining data/leptonlib-1.79.0/src/coloring.c Examining data/leptonlib-1.79.0/src/dewarp3.c Examining data/leptonlib-1.79.0/src/tiffio.c Examining data/leptonlib-1.79.0/src/pix2.c Examining data/leptonlib-1.79.0/src/regutils.h Examining data/leptonlib-1.79.0/src/compare.c Examining data/leptonlib-1.79.0/src/readfile.c Examining data/leptonlib-1.79.0/src/pix1.c Examining data/leptonlib-1.79.0/src/bootnumgen3.c Examining data/leptonlib-1.79.0/src/fpix1.c Examining data/leptonlib-1.79.0/src/ptra.h Examining data/leptonlib-1.79.0/src/pixafunc2.c Examining data/leptonlib-1.79.0/src/conncomp.c Examining data/leptonlib-1.79.0/src/rotateorth.c Examining data/leptonlib-1.79.0/src/bmf.c Examining data/leptonlib-1.79.0/src/runlength.c Examining data/leptonlib-1.79.0/src/boxfunc1.c Examining data/leptonlib-1.79.0/src/affine.c Examining data/leptonlib-1.79.0/src/jpegiostub.c Examining data/leptonlib-1.79.0/src/convolve.c Examining data/leptonlib-1.79.0/src/scale1.c Examining data/leptonlib-1.79.0/src/numafunc2.c Examining data/leptonlib-1.79.0/src/boxfunc3.c Examining data/leptonlib-1.79.0/src/colorquant1.c Examining data/leptonlib-1.79.0/src/pixalloc.c Examining data/leptonlib-1.79.0/src/jbclass.h Examining data/leptonlib-1.79.0/src/bmp.h Examining data/leptonlib-1.79.0/src/parseprotos.c Examining data/leptonlib-1.79.0/src/recogdid.c Examining data/leptonlib-1.79.0/src/array.h Examining data/leptonlib-1.79.0/src/affinecompose.c Examining data/leptonlib-1.79.0/src/fmorphgen.1.c Examining data/leptonlib-1.79.0/src/stringcode.c Examining data/leptonlib-1.79.0/src/pixafunc1.c Examining data/leptonlib-1.79.0/src/watershed.h Examining data/leptonlib-1.79.0/src/roplow.c Examining data/leptonlib-1.79.0/src/pdfio1.c Examining data/leptonlib-1.79.0/src/psio2.c Examining data/leptonlib-1.79.0/src/bmf.h Examining data/leptonlib-1.79.0/src/pix3.c Examining data/leptonlib-1.79.0/src/jp2kheader.c Examining data/leptonlib-1.79.0/src/readbarcode.h Examining data/leptonlib-1.79.0/src/kernel.c Examining data/leptonlib-1.79.0/src/bmfdata.h Examining data/leptonlib-1.79.0/src/ptafunc2.c Examining data/leptonlib-1.79.0/src/pixcomp.c Examining data/leptonlib-1.79.0/src/webpanimio.c Examining data/leptonlib-1.79.0/src/dewarp1.c Examining data/leptonlib-1.79.0/src/webpiostub.c Examining data/leptonlib-1.79.0/src/rbtree.h Examining data/leptonlib-1.79.0/src/heap.c Examining data/leptonlib-1.79.0/src/quadtree.c Examining data/leptonlib-1.79.0/src/bytearray.c Examining data/leptonlib-1.79.0/src/finditalic.c Examining data/leptonlib-1.79.0/src/fhmtgen.1.c Examining data/leptonlib-1.79.0/src/pix4.c Examining data/leptonlib-1.79.0/src/recogtrain.c Examining data/leptonlib-1.79.0/src/dnabasic.c Examining data/leptonlib-1.79.0/src/psio2stub.c Examining data/leptonlib-1.79.0/src/jp2kiostub.c Examining data/leptonlib-1.79.0/src/colorseg.c Examining data/leptonlib-1.79.0/src/dwacomblow.2.c Examining data/leptonlib-1.79.0/src/shear.c Examining data/leptonlib-1.79.0/src/alltypes.h Examining data/leptonlib-1.79.0/src/writefile.c Examining data/leptonlib-1.79.0/src/utils1.c Examining data/leptonlib-1.79.0/src/recogbasic.c Examining data/leptonlib-1.79.0/src/pngiostub.c Examining data/leptonlib-1.79.0/src/sel1.c Examining data/leptonlib-1.79.0/src/queue.c Examining data/leptonlib-1.79.0/src/rank.c Examining data/leptonlib-1.79.0/src/zlibmem.c Examining data/leptonlib-1.79.0/src/numabasic.c Examining data/leptonlib-1.79.0/src/graphics.c Examining data/leptonlib-1.79.0/src/pixarith.c Examining data/leptonlib-1.79.0/src/adaptmap.c Examining data/leptonlib-1.79.0/src/pnmiostub.c Examining data/leptonlib-1.79.0/src/morph.c Examining data/leptonlib-1.79.0/src/rop.c Examining data/leptonlib-1.79.0/src/textops.c Examining data/leptonlib-1.79.0/src/seedfill.c Examining data/leptonlib-1.79.0/src/list.c Examining data/leptonlib-1.79.0/src/recog.h Examining data/leptonlib-1.79.0/src/binexpand.c Examining data/leptonlib-1.79.0/src/jpegio.c Examining data/leptonlib-1.79.0/src/colorquant2.c Examining data/leptonlib-1.79.0/src/checkerboard.c Examining data/leptonlib-1.79.0/src/jp2kio.c Examining data/leptonlib-1.79.0/src/gplot.h Examining data/leptonlib-1.79.0/src/list.h Examining data/leptonlib-1.79.0/src/heap.h Examining data/leptonlib-1.79.0/src/leptwin.c Examining data/leptonlib-1.79.0/src/tiffiostub.c Examining data/leptonlib-1.79.0/src/morphdwa.c Examining data/leptonlib-1.79.0/src/fliphmtgen.c Examining data/leptonlib-1.79.0/src/libversions.c Examining data/leptonlib-1.79.0/src/rotate.c Examining data/leptonlib-1.79.0/src/boxbasic.c Examining data/leptonlib-1.79.0/src/bilateral.h Examining data/leptonlib-1.79.0/src/dnafunc1.c Examining data/leptonlib-1.79.0/src/dnahash.c Examining data/leptonlib-1.79.0/src/colormorph.c Examining data/leptonlib-1.79.0/src/partify.c Examining data/leptonlib-1.79.0/src/fhmtgenlow.1.c Examining data/leptonlib-1.79.0/src/regutils.c Examining data/leptonlib-1.79.0/src/pageseg.c Examining data/leptonlib-1.79.0/src/convertfiles.c Examining data/leptonlib-1.79.0/src/sudoku.h Examining data/leptonlib-1.79.0/src/boxfunc5.c Examining data/leptonlib-1.79.0/src/colorspace.c Examining data/leptonlib-1.79.0/src/pdfio1stub.c Examining data/leptonlib-1.79.0/src/pngio.c Examining data/leptonlib-1.79.0/src/projective.c Examining data/leptonlib-1.79.0/src/blend.c Examining data/leptonlib-1.79.0/src/morphapp.c Examining data/leptonlib-1.79.0/src/fhmtauto.c Examining data/leptonlib-1.79.0/src/sel2.c Examining data/leptonlib-1.79.0/src/morph.h Examining data/leptonlib-1.79.0/src/paintcmap.c Examining data/leptonlib-1.79.0/src/boxfunc4.c Examining data/leptonlib-1.79.0/src/arrayaccess.c Examining data/leptonlib-1.79.0/sw.cpp FINAL RESULTS: data/leptonlib-1.79.0/prog/alltests_reg.c:246:15: [4] (shell) system: This causes a new program to execute and is difficult to use safely (CWE-78). try using a library call that implements the same functionality if available. ret = system(command); data/leptonlib-1.79.0/prog/alltests_reg.c:266:15: [4] (shell) system: This causes a new program to execute and is difficult to use safely (CWE-78). try using a library call that implements the same functionality if available. ret = system(command); data/leptonlib-1.79.0/prog/binmorph2_reg.c:199:5: [4] (format) fprintf: If format strings can be influenced by an attacker, they can be exploited (CWE-134). Use a constant for the format specification. fprintf(stderr, str); data/leptonlib-1.79.0/prog/binmorph2_reg.c:207:5: [4] (format) fprintf: If format strings can be influenced by an attacker, they can be exploited (CWE-134). Use a constant for the format specification. fprintf(stderr, str); data/leptonlib-1.79.0/prog/binmorph2_reg.c:213:5: [4] (format) fprintf: If format strings can be influenced by an attacker, they can be exploited (CWE-134). Use a constant for the format specification. fprintf(stderr, str); data/leptonlib-1.79.0/prog/binmorph2_reg.c:219:5: [4] (format) fprintf: If format strings can be influenced by an attacker, they can be exploited (CWE-134). Use a constant for the format specification. fprintf(stderr, str); data/leptonlib-1.79.0/prog/cleanpdf.c:136:15: [4] (shell) system: This causes a new program to execute and is difficult to use safely (CWE-78). try using a library call that implements the same functionality if available. ret = system(buf); /* pdfimages -j */ data/leptonlib-1.79.0/prog/concatpdf.c:105:15: [4] (shell) system: This causes a new program to execute and is difficult to use safely (CWE-78). try using a library call that implements the same functionality if available. ret = system(buf); /* acroread -toPostScript -annotsOff */ data/leptonlib-1.79.0/prog/concatpdf.c:126:15: [4] (shell) system: This causes a new program to execute and is difficult to use safely (CWE-78). try using a library call that implements the same functionality if available. ret = system(buf); /* ps2png-gray */ data/leptonlib-1.79.0/prog/htmlviewer.c:165:11: [4] (shell) system: This causes a new program to execute and is difficult to use safely (CWE-78). try using a library call that implements the same functionality if available. ret = system(buf); data/leptonlib-1.79.0/prog/livre_makefigs.c:61:14: [4] (shell) system: This causes a new program to execute and is difficult to use safely (CWE-78). try using a library call that implements the same functionality if available. ignore = system("livre_seedgen"); data/leptonlib-1.79.0/prog/livre_makefigs.c:64:14: [4] (shell) system: This causes a new program to execute and is difficult to use safely (CWE-78). try using a library call that implements the same functionality if available. ignore = system(buf); data/leptonlib-1.79.0/prog/livre_makefigs.c:68:14: [4] (shell) system: This causes a new program to execute and is difficult to use safely (CWE-78). try using a library call that implements the same functionality if available. ignore = system(buf); data/leptonlib-1.79.0/prog/livre_makefigs.c:71:14: [4] (shell) system: This causes a new program to execute and is difficult to use safely (CWE-78). try using a library call that implements the same functionality if available. ignore = system(buf); data/leptonlib-1.79.0/prog/livre_makefigs.c:74:14: [4] (shell) system: This causes a new program to execute and is difficult to use safely (CWE-78). try using a library call that implements the same functionality if available. ignore = system(buf); data/leptonlib-1.79.0/prog/livre_makefigs.c:77:14: [4] (shell) system: This causes a new program to execute and is difficult to use safely (CWE-78). try using a library call that implements the same functionality if available. ignore = system(buf); data/leptonlib-1.79.0/prog/livre_makefigs.c:80:14: [4] (shell) system: This causes a new program to execute and is difficult to use safely (CWE-78). try using a library call that implements the same functionality if available. ignore = system(buf); data/leptonlib-1.79.0/prog/livre_makefigs.c:88:14: [4] (shell) system: This causes a new program to execute and is difficult to use safely (CWE-78). try using a library call that implements the same functionality if available. ignore = system("livre_orient"); data/leptonlib-1.79.0/prog/livre_makefigs.c:91:14: [4] (shell) system: This causes a new program to execute and is difficult to use safely (CWE-78). try using a library call that implements the same functionality if available. ignore = system(buf); data/leptonlib-1.79.0/prog/livre_makefigs.c:99:14: [4] (shell) system: This causes a new program to execute and is difficult to use safely (CWE-78). try using a library call that implements the same functionality if available. ignore = system("livre_hmt 1 8"); data/leptonlib-1.79.0/prog/livre_makefigs.c:102:14: [4] (shell) system: This causes a new program to execute and is difficult to use safely (CWE-78). try using a library call that implements the same functionality if available. ignore = system(buf); data/leptonlib-1.79.0/prog/livre_makefigs.c:110:14: [4] (shell) system: This causes a new program to execute and is difficult to use safely (CWE-78). try using a library call that implements the same functionality if available. ignore = system("livre_hmt 2 4"); data/leptonlib-1.79.0/prog/livre_makefigs.c:113:14: [4] (shell) system: This causes a new program to execute and is difficult to use safely (CWE-78). try using a library call that implements the same functionality if available. ignore = system(buf); data/leptonlib-1.79.0/prog/livre_makefigs.c:116:14: [4] (shell) system: This causes a new program to execute and is difficult to use safely (CWE-78). try using a library call that implements the same functionality if available. ignore = system("livre_tophat"); data/leptonlib-1.79.0/prog/livre_makefigs.c:119:14: [4] (shell) system: This causes a new program to execute and is difficult to use safely (CWE-78). try using a library call that implements the same functionality if available. ignore = system(buf); data/leptonlib-1.79.0/prog/livre_makefigs.c:122:14: [4] (shell) system: This causes a new program to execute and is difficult to use safely (CWE-78). try using a library call that implements the same functionality if available. ignore = system("livre_adapt"); data/leptonlib-1.79.0/prog/pdfio2_reg.c:297:11: [4] (shell) system: This causes a new program to execute and is difficult to use safely (CWE-78). try using a library call that implements the same functionality if available. ret = system(buffer); /* pdftk */ data/leptonlib-1.79.0/prog/printimage.c:145:19: [4] (shell) system: This causes a new program to execute and is difficult to use safely (CWE-78). try using a library call that implements the same functionality if available. ret = system(buffer); data/leptonlib-1.79.0/prog/printimage.c:149:19: [4] (shell) system: This causes a new program to execute and is difficult to use safely (CWE-78). try using a library call that implements the same functionality if available. ret = system(buffer); data/leptonlib-1.79.0/prog/printsplitimage.c:141:22: [4] (shell) system: This causes a new program to execute and is difficult to use safely (CWE-78). try using a library call that implements the same functionality if available. ignore = system(buf); data/leptonlib-1.79.0/prog/printtiff.c:92:15: [4] (shell) system: This causes a new program to execute and is difficult to use safely (CWE-78). try using a library call that implements the same functionality if available. ret = system(buf); data/leptonlib-1.79.0/prog/psioseg_reg.c:152:11: [4] (shell) system: This causes a new program to execute and is difficult to use safely (CWE-78). try using a library call that implements the same functionality if available. ret = system(buf); /* ps2pdf */ data/leptonlib-1.79.0/prog/xtractprotos.c:199:15: [4] (shell) system: This causes a new program to execute and is difficult to use safely (CWE-78). try using a library call that implements the same functionality if available. ret = system(buf); /* cpp */ data/leptonlib-1.79.0/src/environ.h:556:9: [4] (format) snprintf: If format strings can be influenced by an attacker, they can be exploited, and note that sprintf variations do not always \0-terminate (CWE-134). Use a constant for the format specification. #define snprintf(buf, size, ...) _snprintf_s(buf, size, _TRUNCATE, __VA_ARGS__) data/leptonlib-1.79.0/src/fhmtauto.c:353:9: [4] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. sprintf(bigbuf, " \"%s\",", data/leptonlib-1.79.0/src/fhmtauto.c:357:5: [4] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. sprintf(bigbuf, " \"%s\"};", data/leptonlib-1.79.0/src/fhmtauto.c:403:9: [4] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. sprintf(bigbuf, "%s.%d.c", OUTROOT, fileindex); data/leptonlib-1.79.0/src/fhmtauto.c:482:9: [4] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. sprintf(bigbuf, "static void %s%s", fname, PROTOARGS); data/leptonlib-1.79.0/src/fhmtauto.c:540:9: [4] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. sprintf(bigbuf, " %s(datad, w, h, wpld, datas, wpls);", data/leptonlib-1.79.0/src/fhmtauto.c:564:9: [4] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. sprintf(bigbuf, "%s(l_uint32 *datad,", fname); data/leptonlib-1.79.0/src/fhmtauto.c:622:9: [4] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. sprintf(bigbuf, "%slow.%d.c", OUTROOT, fileindex); data/leptonlib-1.79.0/src/fhmtauto.c:731:21: [4] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. sprintf(bigbuf, " *dptr = %s;", string); data/leptonlib-1.79.0/src/fhmtauto.c:733:21: [4] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. sprintf(bigbuf, " *dptr = %s %s", string, land); data/leptonlib-1.79.0/src/fhmtauto.c:735:21: [4] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. sprintf(bigbuf, " %s %s", string, land); data/leptonlib-1.79.0/src/fhmtauto.c:737:21: [4] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. sprintf(bigbuf, " %s;", string); data/leptonlib-1.79.0/src/fhmtauto.c:772:13: [4] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. sprintf(bigbuf, "(*(sptr %s))", wplstrm[absy - 1]); data/leptonlib-1.79.0/src/fhmtauto.c:774:13: [4] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. sprintf(bigbuf, "(*(sptr %s))", wplstrp[absy - 1]); data/leptonlib-1.79.0/src/fhmtauto.c:782:13: [4] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. sprintf(bigbuf, "((*(sptr %s) >> %d) | (*(sptr %s - 1) << %d))", data/leptonlib-1.79.0/src/fhmtauto.c:785:13: [4] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. sprintf(bigbuf, "((*(sptr %s) << %d) | (*(sptr %s + 1) >> %d))", data/leptonlib-1.79.0/src/fhmtauto.c:788:13: [4] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. sprintf(bigbuf, "((*(sptr %s) >> %d) | (*(sptr %s - 1) << %d))", data/leptonlib-1.79.0/src/fhmtauto.c:791:13: [4] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. sprintf(bigbuf, "((*(sptr %s) << %d) | (*(sptr %s + 1) >> %d))", data/leptonlib-1.79.0/src/fhmtauto.c:797:13: [4] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. sprintf(bigbuf, "(~*(sptr %s))", wplstrm[absy - 1]); data/leptonlib-1.79.0/src/fhmtauto.c:799:13: [4] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. sprintf(bigbuf, "(~*(sptr %s))", wplstrp[absy - 1]); data/leptonlib-1.79.0/src/fhmtauto.c:807:13: [4] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. sprintf(bigbuf, "((~*(sptr %s) >> %d) | (~*(sptr %s - 1) << %d))", data/leptonlib-1.79.0/src/fhmtauto.c:810:13: [4] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. sprintf(bigbuf, "((~*(sptr %s) << %d) | (~*(sptr %s + 1) >> %d))", data/leptonlib-1.79.0/src/fhmtauto.c:813:13: [4] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. sprintf(bigbuf, "((~*(sptr %s) >> %d) | (~*(sptr %s - 1) << %d))", data/leptonlib-1.79.0/src/fhmtauto.c:816:13: [4] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. sprintf(bigbuf, "((~*(sptr %s) << %d) | (~*(sptr %s + 1) >> %d))", data/leptonlib-1.79.0/src/fmorphauto.c:401:9: [4] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. sprintf(bigbuf, " \"%s\",", data/leptonlib-1.79.0/src/fmorphauto.c:405:5: [4] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. sprintf(bigbuf, " \"%s\"};", data/leptonlib-1.79.0/src/fmorphauto.c:464:9: [4] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. sprintf(bigbuf, "%s.%d.c", OUTROOT, fileindex); data/leptonlib-1.79.0/src/fmorphauto.c:542:9: [4] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. sprintf(bigbuf, "static void %s%s", fname, PROTOARGS); data/leptonlib-1.79.0/src/fmorphauto.c:603:9: [4] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. sprintf(bigbuf, " %s(datad, w, h, wpld, datas, wpls);", data/leptonlib-1.79.0/src/fmorphauto.c:627:9: [4] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. sprintf(bigbuf, "%s(l_uint32 *datad,", fname); data/leptonlib-1.79.0/src/fmorphauto.c:661:9: [4] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. sprintf(bigbuf, "%slow.%d.c", OUTROOT, fileindex); data/leptonlib-1.79.0/src/fmorphauto.c:815:21: [4] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. sprintf(bigbuf, " *dptr = %s;", string); data/leptonlib-1.79.0/src/fmorphauto.c:817:21: [4] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. sprintf(bigbuf, " *dptr = %s %s", string, tstr); data/leptonlib-1.79.0/src/fmorphauto.c:819:21: [4] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. sprintf(bigbuf, " %s %s", string, tstr); data/leptonlib-1.79.0/src/fmorphauto.c:821:21: [4] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. sprintf(bigbuf, " %s;", string); data/leptonlib-1.79.0/src/fmorphauto.c:854:9: [4] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. sprintf(bigbuf, "(*(sptr %s))", wplstrm[absy - 1]); data/leptonlib-1.79.0/src/fmorphauto.c:856:9: [4] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. sprintf(bigbuf, "(*(sptr %s))", wplstrp[absy - 1]); data/leptonlib-1.79.0/src/fmorphauto.c:864:9: [4] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. sprintf(bigbuf, "((*(sptr %s) >> %d) | (*(sptr %s - 1) << %d))", data/leptonlib-1.79.0/src/fmorphauto.c:867:9: [4] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. sprintf(bigbuf, "((*(sptr %s) << %d) | (*(sptr %s + 1) >> %d))", data/leptonlib-1.79.0/src/fmorphauto.c:870:9: [4] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. sprintf(bigbuf, "((*(sptr %s) >> %d) | (*(sptr %s - 1) << %d))", data/leptonlib-1.79.0/src/fmorphauto.c:873:9: [4] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. sprintf(bigbuf, "((*(sptr %s) << %d) | (*(sptr %s + 1) >> %d))", data/leptonlib-1.79.0/src/numabasic.c:1067:13: [4] (format) snprintf: If format strings can be influenced by an attacker, they can be exploited, and note that sprintf variations do not always \0-terminate (CWE-134). Use a constant for the format specification. snprintf(strbuf, sizeof(strbuf), fmt, ival); data/leptonlib-1.79.0/src/numabasic.c:1070:13: [4] (format) snprintf: If format strings can be influenced by an attacker, they can be exploited, and note that sprintf variations do not always \0-terminate (CWE-134). Use a constant for the format specification. snprintf(strbuf, sizeof(strbuf), fmt, fval); data/leptonlib-1.79.0/src/utils1.c:312:9: [4] (format) vsnprintf: If format strings can be influenced by an attacker, they can be exploited, and note that sprintf variations do not always \0-terminate (CWE-134). Use a constant for the format specification. n = vsnprintf(msg, sizeof(msg), fmt, args); data/leptonlib-1.79.0/src/utils2.c:967:5: [4] (buffer) strcpy: Does not check for buffer overflows when copying to destination [MS-banned] (CWE-120). Consider using snprintf, strcpy_s, or strlcpy (warning: strncpy easily misused). strcpy(dest + npre, sub2); data/leptonlib-1.79.0/src/utils2.c:968:5: [4] (buffer) strcpy: Does not check for buffer overflows when copying to destination [MS-banned] (CWE-120). Consider using snprintf, strcpy_s, or strlcpy (warning: strncpy easily misused). strcpy(dest + npre + nsub2, ptr + nsub1); data/leptonlib-1.79.0/src/utils2.c:2659:11: [4] (shell) system: This causes a new program to execute and is difficult to use safely (CWE-78). try using a library call that implements the same functionality if available. ret = system(cmd); data/leptonlib-1.79.0/src/utils2.c:2666:10: [4] (shell) system: This causes a new program to execute and is difficult to use safely (CWE-78). try using a library call that implements the same functionality if available. ret = system(cmd); data/leptonlib-1.79.0/prog/files_reg.c:123:9: [3] (buffer) getenv: Environment variables are untrustable input if they can be set by an attacker. They can have any content and length, and the same variable can be set more than once (CWE-807, CWE-20). Check environment variables carefully before using them. if (getenv("TMPDIR") == NULL) { data/leptonlib-1.79.0/prog/overlap_reg.c:71:9: [3] (random) srand: This function is not sufficiently random for security-related functions such as key and nonce creation (CWE-327). Use a more secure technique for acquiring random values. srand(45617); data/leptonlib-1.79.0/prog/percolatetest.c:65:5: [3] (random) srand: This function is not sufficiently random for security-related functions such as key and nonce creation (CWE-327). Use a more secure technique for acquiring random values. srand(26); data/leptonlib-1.79.0/prog/percolatetest.c:90:5: [3] (random) srand: This function is not sufficiently random for security-related functions such as key and nonce creation (CWE-327). Use a more secure technique for acquiring random values. srand(26); data/leptonlib-1.79.0/prog/percolatetest.c:116:5: [3] (random) srand: This function is not sufficiently random for security-related functions such as key and nonce creation (CWE-327). Use a more secure technique for acquiring random values. srand(26); data/leptonlib-1.79.0/prog/percolatetest.c:150:5: [3] (random) srand: This function is not sufficiently random for security-related functions such as key and nonce creation (CWE-327). Use a more secure technique for acquiring random values. srand(26); data/leptonlib-1.79.0/prog/percolatetest.c:184:5: [3] (random) srand: This function is not sufficiently random for security-related functions such as key and nonce creation (CWE-327). Use a more secure technique for acquiring random values. srand(26); data/leptonlib-1.79.0/prog/percolatetest.c:215:5: [3] (random) srand: This function is not sufficiently random for security-related functions such as key and nonce creation (CWE-327). Use a more secure technique for acquiring random values. srand(26); data/leptonlib-1.79.0/prog/percolatetest.c:247:5: [3] (random) srand: This function is not sufficiently random for security-related functions such as key and nonce creation (CWE-327). Use a more secure technique for acquiring random values. srand(26); data/leptonlib-1.79.0/src/dewarp2.c:437:9: [3] (random) srand: This function is not sufficiently random for security-related functions such as key and nonce creation (CWE-327). Use a more secure technique for acquiring random values. srand(3); data/leptonlib-1.79.0/src/dewarp2.c:439:9: [3] (random) srand: This function is not sufficiently random for security-related functions such as key and nonce creation (CWE-327). Use a more secure technique for acquiring random values. srand(3); /* use the same colors for text and reference lines */ data/leptonlib-1.79.0/src/maze.c:165:5: [3] (random) srand: This function is not sufficiently random for security-related functions such as key and nonce creation (CWE-327). Use a more secure technique for acquiring random values. srand(28*333); data/leptonlib-1.79.0/src/numafunc1.c:3004:5: [3] (random) srand: This function is not sufficiently random for security-related functions such as key and nonce creation (CWE-327). Use a more secure technique for acquiring random values. srand(seed); data/leptonlib-1.79.0/src/sarray1.c:1887:14: [3] (buffer) realpath: This function does not protect against buffer overflows, and some implementations can overflow internally (CWE-120/CWE-785!). Ensure that the destination buffer is at least of size MAXPATHLEN, andto protect against implementation problems, the input argument should also be checked to ensure it is no larger than MAXPATHLEN. ignore = realpath(dirname, dir); /* see note above */ data/leptonlib-1.79.0/src/sudoku.c:756:5: [3] (random) srand: This function is not sufficiently random for security-related functions such as key and nonce creation (CWE-327). Use a more secure technique for acquiring random values. srand(seed); data/leptonlib-1.79.0/src/utils1.c:149:18: [3] (buffer) getenv: Environment variables are untrustable input if they can be set by an attacker. They can have any content and length, and the same variable can be set more than once (CWE-807, CWE-20). Check environment variables carefully before using them. envsev = getenv("LEPT_MSG_SEVERITY"); data/leptonlib-1.79.0/src/utils1.c:675:19: [3] (random) srand: This function is not sufficiently random for security-related functions such as key and nonce creation (CWE-327). Use a more secure technique for acquiring random values. if (seed > 0) srand(seed); data/leptonlib-1.79.0/src/utils2.c:2497:16: [3] (buffer) realpath: This function does not protect against buffer overflows, and some implementations can overflow internally (CWE-120/CWE-785!). Ensure that the destination buffer is at least of size MAXPATHLEN, andto protect against implementation problems, the input argument should also be checked to ensure it is no larger than MAXPATHLEN. remove(realpath); data/leptonlib-1.79.0/src/utils2.c:2498:19: [3] (buffer) realpath: This function does not protect against buffer overflows, and some implementations can overflow internally (CWE-120/CWE-785!). Ensure that the destination buffer is at least of size MAXPATHLEN, andto protect against implementation problems, the input argument should also be checked to ensure it is no larger than MAXPATHLEN. LEPT_FREE(realpath); data/leptonlib-1.79.0/src/utils2.c:3306:9: [3] (tmpfile) GetTempFileName: Temporary file race condition in certain cases (e.g., if run as SYSTEM in many versions of Windows) (CWE-377). if (GetTempFileName(dirname, "lp.", 0, fname) == 0) data/leptonlib-1.79.0/src/warper.c:214:5: [3] (random) srand: This function is not sufficiently random for security-related functions such as key and nonce creation (CWE-327). Use a more secure technique for acquiring random values. srand(seed); data/leptonlib-1.79.0/src/warper.c:363:5: [3] (random) srand: This function is not sufficiently random for security-related functions such as key and nonce creation (CWE-327). Use a more secure technique for acquiring random values. srand(seed); data/leptonlib-1.79.0/prog/adaptmap_dark.c:157:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[256]; data/leptonlib-1.79.0/prog/alltests_reg.c:209:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char command[256], buf[256]; data/leptonlib-1.79.0/prog/autogentest1.c:54:14: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. static const char *files[2] = { "fonts/chars-6.pa", "fonts/chars-10.pa" }; data/leptonlib-1.79.0/prog/autogentest2.c:45:14: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. static const char *files[2] = { "fonts/chars-6.pa", "fonts/chars-10.pa" }; data/leptonlib-1.79.0/prog/binarizefiles.c:47:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[256], dirname[256]; data/leptonlib-1.79.0/prog/binarizefiles.c:68:14: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). thresh = atoi(argv[3]); data/leptonlib-1.79.0/prog/binmorph1_reg.c:98:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char sequence[512]; data/leptonlib-1.79.0/prog/binmorph2_reg.c:50:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buffer1[256]; data/leptonlib-1.79.0/prog/binmorph2_reg.c:51:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buffer2[256]; data/leptonlib-1.79.0/prog/blackwhite_reg.c:39:7: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. const char *fnames[11] = {"test1.png", "speckle2.png", "weasel2.4g.png", data/leptonlib-1.79.0/prog/blend2_reg.c:41:14: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. static const char fname_png[64] = "/tmp/lept/regout/blend2.14.png"; data/leptonlib-1.79.0/prog/blend2_reg.c:42:14: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. static const char fname_bmp[64] = "/tmp/lept/regout/blend2.14.bmp"; data/leptonlib-1.79.0/prog/boxa3_reg.c:42:14: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. static const char *boxafiles[3] = {"boxap1.ba", "boxap2.ba", "boxap3.ba"}; data/leptonlib-1.79.0/prog/cleanpdf.c:87:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[256]; data/leptonlib-1.79.0/prog/cleanpdf.c:99:14: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). thresh = atoi(argv[2]); data/leptonlib-1.79.0/prog/cleanpdf.c:100:11: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). res = atoi(argv[3]); data/leptonlib-1.79.0/prog/cleanpdf.c:102:20: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). rotation = atoi(argv[4]); data/leptonlib-1.79.0/prog/coloring_reg.c:49:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[512]; data/leptonlib-1.79.0/prog/colorize_reg.c:273:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char text[64]; data/leptonlib-1.79.0/prog/colormorph_reg.c:44:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[256]; data/leptonlib-1.79.0/prog/colorquant_reg.c:41:14: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. static const char *image[4] = {"marge.jpg", data/leptonlib-1.79.0/prog/colorquant_reg.c:73:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[256]; data/leptonlib-1.79.0/prog/colorsegtest.c:89:20: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). max_dist = atoi(argv[3]); data/leptonlib-1.79.0/prog/colorsegtest.c:90:22: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). max_colors = atoi(argv[4]); data/leptonlib-1.79.0/prog/colorsegtest.c:91:20: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). sel_size = atoi(argv[5]); data/leptonlib-1.79.0/prog/colorsegtest.c:92:24: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). final_colors = atoi(argv[6]); data/leptonlib-1.79.0/prog/colorspace_reg.c:44:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char label[512]; data/leptonlib-1.79.0/prog/comparepixa.c:87:10: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). nx = atoi(argv[3]); data/leptonlib-1.79.0/prog/comparepixa.c:88:10: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). ny = atoi(argv[4]); data/leptonlib-1.79.0/prog/comparepixa.c:89:10: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). tw = atoi(argv[5]); data/leptonlib-1.79.0/prog/comparepixa.c:90:15: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). spacing = atoi(argv[6]); data/leptonlib-1.79.0/prog/comparepixa.c:91:14: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). border = atoi(argv[7]); data/leptonlib-1.79.0/prog/comparepixa.c:92:16: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). fontsize = atoi(argv[8]); data/leptonlib-1.79.0/prog/comparetest.c:77:12: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). type = atoi(argv[3]); data/leptonlib-1.79.0/prog/concatpdf.c:74:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[256], rootname[256]; data/leptonlib-1.79.0/prog/contrasttest.c:45:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[512]; data/leptonlib-1.79.0/prog/convertfilestopdf.c:90:11: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). res = atoi(argv[3]); data/leptonlib-1.79.0/prog/convertfilestopdf.c:92:12: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). type = atoi(argv[5]); data/leptonlib-1.79.0/prog/convertfilestopdf.c:93:15: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). quality = atoi(argv[6]); data/leptonlib-1.79.0/prog/convertfilestops.c:75:11: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). res = atoi(argv[3]); data/leptonlib-1.79.0/prog/convertsegfilestopdf.c:122:11: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). res = atoi(argv[5]); data/leptonlib-1.79.0/prog/convertsegfilestopdf.c:123:12: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). type = atoi(argv[6]); data/leptonlib-1.79.0/prog/convertsegfilestopdf.c:124:14: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). thresh = atoi(argv[7]); data/leptonlib-1.79.0/prog/convertsegfilestops.c:115:19: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). page_numpre = atoi(argv[3]); data/leptonlib-1.79.0/prog/convertsegfilestops.c:118:19: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). mask_numpre = atoi(argv[6]); data/leptonlib-1.79.0/prog/convertsegfilestops.c:119:15: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). numpost = atoi(argv[7]); data/leptonlib-1.79.0/prog/convertsegfilestops.c:120:14: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). maxnum = atoi(argv[8]); data/leptonlib-1.79.0/prog/convertsegfilestops.c:123:17: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). threshold = atoi(argv[11]); data/leptonlib-1.79.0/prog/converttops.c:58:17: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). level = atoi(argv[3]); data/leptonlib-1.79.0/prog/corrupttest.c:83:16: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). deletion = atoi(argv[2]); data/leptonlib-1.79.0/prog/croptext.c:61:14: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). border = atoi(argv[2]); data/leptonlib-1.79.0/prog/deskew_it.c:77:17: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). threshold = atoi(argv[2]); data/leptonlib-1.79.0/prog/deskew_it.c:79:15: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). tryboth = atoi(argv[4]); data/leptonlib-1.79.0/prog/dewarprules.c:69:14: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). select = atoi(argv[1]); data/leptonlib-1.79.0/prog/dewarprules.c:70:12: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). ndew = atoi(argv[2]); data/leptonlib-1.79.0/prog/dewarptest2.c:68:18: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). pageno = atoi(argv[3]); data/leptonlib-1.79.0/prog/dewarptest2.c:72:14: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). method = atoi(argv[1]); data/leptonlib-1.79.0/prog/dewarptest5.c:47:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[64]; data/leptonlib-1.79.0/prog/digitprep1.c:45:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[16]; data/leptonlib-1.79.0/prog/displayboxa.c:66:13: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). first = atoi(argv[2]); data/leptonlib-1.79.0/prog/displayboxa.c:67:12: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). last = atoi(argv[3]); data/leptonlib-1.79.0/prog/displayboxa.c:68:13: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). width = atoi(argv[4]); data/leptonlib-1.79.0/prog/displayboxes_on_pixa.c:79:12: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). type = atoi(argv[3]); data/leptonlib-1.79.0/prog/displayboxes_on_pixa.c:80:13: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). width = atoi(argv[4]); data/leptonlib-1.79.0/prog/displayboxes_on_pixa.c:82:15: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). display = atoi(argv[6]); data/leptonlib-1.79.0/prog/displaypixa.c:54:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[32]; data/leptonlib-1.79.0/prog/displaypixa.c:78:20: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). showtext = atoi(argv[3]); data/leptonlib-1.79.0/prog/displaypixa.c:133:14: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). border = atoi(argv[3]); data/leptonlib-1.79.0/prog/displaypixa.c:134:16: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). lossless = atoi(argv[4]); data/leptonlib-1.79.0/prog/displaypixa.c:135:15: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). display = atoi(argv[5]); data/leptonlib-1.79.0/prog/displaypixa.c:137:16: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). showtext = atoi(argv[7]); data/leptonlib-1.79.0/prog/enhance_reg.c:49:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char textstr[256]; data/leptonlib-1.79.0/prog/fcombautogen.c:66:13: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). index = atoi(argv[1]); data/leptonlib-1.79.0/prog/fhmtautogen.c:62:13: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). index = atoi(argv[1]); data/leptonlib-1.79.0/prog/files_reg.c:177:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char realnewdir[256], newnewdir[256]; data/leptonlib-1.79.0/prog/files_reg.c:262:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char expect[256], localdir[256]; data/leptonlib-1.79.0/prog/findpattern_reg.c:58:14: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. static const char *patname[2] = { data/leptonlib-1.79.0/prog/fmorphautogen.c:61:13: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). index = atoi(argv[1]); data/leptonlib-1.79.0/prog/fpixcontours.c:62:21: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). ncontours = atoi(argv[2]); data/leptonlib-1.79.0/prog/gammatest.c:45:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[512]; data/leptonlib-1.79.0/prog/genfonts_reg.c:62:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[512]; data/leptonlib-1.79.0/prog/gifio_reg.c:83:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[64]; data/leptonlib-1.79.0/prog/gifio_reg.c:173:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[256]; data/leptonlib-1.79.0/prog/graymorph1_reg.c:63:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char seq[512]; data/leptonlib-1.79.0/prog/graymorphtest.c:51:13: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). wsize = atoi(argv[2]); data/leptonlib-1.79.0/prog/graymorphtest.c:52:13: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). hsize = atoi(argv[3]); data/leptonlib-1.79.0/prog/hashtest.c:283:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[64]; data/leptonlib-1.79.0/prog/histotest.c:60:15: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). sigbits = atoi(argv[2]); data/leptonlib-1.79.0/prog/htmlviewer.c:85:18: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). thumbwidth = atoi(argv[4]); data/leptonlib-1.79.0/prog/htmlviewer.c:86:17: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). viewwidth = atoi(argv[5]); data/leptonlib-1.79.0/prog/htmlviewer.c:132:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[512]; data/leptonlib-1.79.0/prog/imagetops.c:70:13: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). level = atoi(argv[2]); data/leptonlib-1.79.0/prog/ioformats_reg.c:98:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char psname[256]; data/leptonlib-1.79.0/prog/italic_reg.c:44:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char opstring[32]; data/leptonlib-1.79.0/prog/jbcorrelation.c:69:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char filename[BUF_SIZE]; data/leptonlib-1.79.0/prog/jbcorrelation.c:93:21: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). firstpage = atoi(argv[4]); data/leptonlib-1.79.0/prog/jbcorrelation.c:94:18: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). npages = atoi(argv[5]); data/leptonlib-1.79.0/prog/jbrankhaus.c:72:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char filename[BUF_SIZE]; data/leptonlib-1.79.0/prog/jbrankhaus.c:88:12: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). size = atoi(argv[2]); data/leptonlib-1.79.0/prog/jbrankhaus.c:95:21: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). firstpage = atoi(argv[4]); data/leptonlib-1.79.0/prog/jbrankhaus.c:96:18: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). npages = atoi(argv[5]); data/leptonlib-1.79.0/prog/jbwords.c:64:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char filename[BUF_SIZE]; data/leptonlib-1.79.0/prog/jbwords.c:79:17: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). reduction = atoi(argv[2]); data/leptonlib-1.79.0/prog/jbwords.c:87:21: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). firstpage = atoi(argv[6]); data/leptonlib-1.79.0/prog/jbwords.c:88:18: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). npages = atoi(argv[7]); data/leptonlib-1.79.0/prog/jp2kio_reg.c:94:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[64]; data/leptonlib-1.79.0/prog/jp2kio_reg.c:137:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[256]; data/leptonlib-1.79.0/prog/jpegio_reg.c:104:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[256]; data/leptonlib-1.79.0/prog/jpegio_reg.c:150:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[256]; data/leptonlib-1.79.0/prog/jpegio_reg.c:233:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[256]; data/leptonlib-1.79.0/prog/jpegio_reg.c:234:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char comment1[256]; data/leptonlib-1.79.0/prog/livre_hmt.c:54:14: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. static const char *patname[3] = { data/leptonlib-1.79.0/prog/livre_hmt.c:72:13: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). patno = atoi(argv[1]); data/leptonlib-1.79.0/prog/livre_hmt.c:73:17: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). reduction = atoi(argv[2]); data/leptonlib-1.79.0/prog/livre_makefigs.c:50:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[256]; data/leptonlib-1.79.0/prog/livre_pageseg.c:84:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[256]; data/leptonlib-1.79.0/prog/maketile.c:69:13: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). depth = atoi(argv[2]); data/leptonlib-1.79.0/prog/maketile.c:71:13: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). width = atoi(argv[4]); data/leptonlib-1.79.0/prog/maketile.c:72:18: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). background = atoi(argv[5]); data/leptonlib-1.79.0/prog/maptest.c:205:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[128]; data/leptonlib-1.79.0/prog/maptest.c:234:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[128]; data/leptonlib-1.79.0/prog/modifyhuesat.c:61:12: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). nhue = atoi(argv[2]); data/leptonlib-1.79.0/prog/modifyhuesat.c:63:12: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). nsat = atoi(argv[4]); data/leptonlib-1.79.0/prog/mtiff_reg.c:53:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[512]; data/leptonlib-1.79.0/prog/multitype_reg.c:39:14: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. static const char *fnames[10] = {"feyn-fract.tif", "speckle2.png", data/leptonlib-1.79.0/prog/numa1_reg.c:49:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf1[64], buf2[64]; data/leptonlib-1.79.0/prog/numaranktest.c:55:16: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). sampling = atoi(argv[2]); data/leptonlib-1.79.0/prog/otsutest1.c:44:8: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. static char buf[256]; data/leptonlib-1.79.0/prog/otsutest1.c:86:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char title[256]; data/leptonlib-1.79.0/prog/otsutest2.c:57:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char textstr[256]; data/leptonlib-1.79.0/prog/pagesegtest2.c:79:14: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). thresh = atoi(argv[2]); data/leptonlib-1.79.0/prog/partitiontest.c:74:12: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). type = atoi(argv[2]); data/leptonlib-1.79.0/prog/partitiontest.c:99:20: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). maxboxes = atoi(argv[3]); data/leptonlib-1.79.0/prog/pdfio2_reg.c:288:5: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buffer[512]; data/leptonlib-1.79.0/prog/pixafileinfo.c:43:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[64]; data/leptonlib-1.79.0/prog/pixserial_reg.c:58:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[256]; data/leptonlib-1.79.0/prog/printimage.c:86:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buffer[512]; data/leptonlib-1.79.0/prog/printsplitimage.c:75:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[512]; data/leptonlib-1.79.0/prog/printsplitimage.c:88:10: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). nx = atoi(argv[2]); data/leptonlib-1.79.0/prog/printsplitimage.c:89:10: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). ny = atoi(argv[3]); data/leptonlib-1.79.0/prog/printtiff.c:69:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[512]; data/leptonlib-1.79.0/prog/psioseg_reg.c:56:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[512]; data/leptonlib-1.79.0/prog/ptra2_reg.c:87:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[256]; data/leptonlib-1.79.0/prog/ptra2_reg.c:204:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[256]; data/leptonlib-1.79.0/prog/recog_bootnum2.c:60:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char rootname[8] = "digit5"; data/leptonlib-1.79.0/prog/recog_bootnum2.c:61:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[64]; data/leptonlib-1.79.0/prog/recog_bootnum2.c:160:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[64]; data/leptonlib-1.79.0/prog/recog_bootnum3.c:53:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[64]; data/leptonlib-1.79.0/prog/recogtest4.c:55:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[256]; data/leptonlib-1.79.0/prog/rectangle_reg.c:49:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[64]; data/leptonlib-1.79.0/prog/reducetest.c:54:14: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). level1 = atoi(argv[3]); data/leptonlib-1.79.0/prog/reducetest.c:55:14: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). level2 = atoi(argv[4]); data/leptonlib-1.79.0/prog/reducetest.c:56:14: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). level3 = atoi(argv[5]); data/leptonlib-1.79.0/prog/reducetest.c:57:14: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). level4 = atoi(argv[6]); data/leptonlib-1.79.0/prog/removecmap.c:59:12: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). type = atoi(argv[2]); data/leptonlib-1.79.0/prog/rotateorthtest1.c:60:15: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). dir = atoi(argv[3]); data/leptonlib-1.79.0/prog/scale_it.c:97:16: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). lossless = atoi(argv[5]); data/leptonlib-1.79.0/prog/scale_it.c:100:19: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). sharpen = atoi(argv[6]); data/leptonlib-1.79.0/prog/scale_it.c:101:21: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). antialias = atoi(argv[7]); data/leptonlib-1.79.0/prog/scale_it.c:102:18: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). togray = atoi(argv[8]); data/leptonlib-1.79.0/prog/scale_reg.c:40:14: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. static const char *image[10] = {"feyn-fract.tif", /* 1 bpp */ data/leptonlib-1.79.0/prog/scaleandtile.c:74:13: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). depth = atoi(argv[3]); data/leptonlib-1.79.0/prog/scaleandtile.c:75:13: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). width = atoi(argv[4]); data/leptonlib-1.79.0/prog/scaleandtile.c:76:13: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). ncols = atoi(argv[5]); data/leptonlib-1.79.0/prog/sharptest.c:56:14: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). smooth = atoi(argv[2]); data/leptonlib-1.79.0/prog/splitimage2pdf.c:58:10: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). nx = atoi(argv[2]); data/leptonlib-1.79.0/prog/splitimage2pdf.c:59:10: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). ny = atoi(argv[3]); data/leptonlib-1.79.0/prog/string_reg.c:43:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char strs[32] = "This is a gooood test!"; data/leptonlib-1.79.0/prog/string_reg.c:44:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char substr1[2] = "o"; data/leptonlib-1.79.0/prog/string_reg.c:45:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char substr2[4] = "00"; data/leptonlib-1.79.0/prog/textorient.c:66:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[BUF_SIZE]; data/leptonlib-1.79.0/prog/trctest.c:53:14: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). minval = atoi(argv[3]); data/leptonlib-1.79.0/prog/trctest.c:54:14: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). maxval = atoi(argv[4]); data/leptonlib-1.79.0/prog/warpertest.c:42:14: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. static const char *opstr[3] = {"", "interpolated", "sampled"}; data/leptonlib-1.79.0/prog/warpertest.c:43:14: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. static const char *dirstr[3] = {"", "to left", "to right"}; data/leptonlib-1.79.0/prog/warpertest.c:55:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[256]; data/leptonlib-1.79.0/prog/webpio_reg.c:98:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[256]; data/leptonlib-1.79.0/prog/webpio_reg.c:128:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[256]; data/leptonlib-1.79.0/prog/wordsinorder.c:58:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char filename[BUF_SIZE]; data/leptonlib-1.79.0/prog/wordsinorder.c:83:21: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). firstpage = atoi(argv[3]); data/leptonlib-1.79.0/prog/wordsinorder.c:84:18: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). npages = atoi(argv[4]); data/leptonlib-1.79.0/prog/writetext_reg.c:69:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[512]; data/leptonlib-1.79.0/prog/xtractprotos.c:102:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[L_BUFSIZE]; data/leptonlib-1.79.0/prog/yuvtest.c:155:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char textbuf[256]; data/leptonlib-1.79.0/prog/yuvtest.c:192:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char textbuf[256]; data/leptonlib-1.79.0/src/bardecode.c:369:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char code[10]; data/leptonlib-1.79.0/src/bardecode.c:449:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char code1[6], code2[6]; data/leptonlib-1.79.0/src/bardecode.c:547:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char code[7]; data/leptonlib-1.79.0/src/bardecode.c:663:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char code[10]; data/leptonlib-1.79.0/src/bardecode.c:746:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char code[8]; data/leptonlib-1.79.0/src/bardecode.c:834:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char code[5]; data/leptonlib-1.79.0/src/bardecode.c:952:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char code[5]; data/leptonlib-1.79.0/src/bbuffer.c:149:9: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(bb->array, indata, nalloc); data/leptonlib-1.79.0/src/bbuffer.c:237:5: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(array, bb->array + bb->nwritten, nbytes); data/leptonlib-1.79.0/src/bbuffer.c:297:5: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(bb->array + bb->n, src, nbytes); data/leptonlib-1.79.0/src/bbuffer.c:424:5: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(dest, bb->array + bb->nwritten, nout); data/leptonlib-1.79.0/src/binexpand.c:117:13: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(lined + k * wpld, lined, 4 * wpld); data/leptonlib-1.79.0/src/binexpand.c:176:13: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(lined + wpld, lined, 4 * wpld); data/leptonlib-1.79.0/src/binexpand.c:190:17: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(lined + k * wpld, lined, 4 * wpld); data/leptonlib-1.79.0/src/binexpand.c:206:17: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(lined + k * wpld, lined, 4 * wpld); data/leptonlib-1.79.0/src/binexpand.c:219:17: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(lined + k * wpld, lined, 4 * wpld); data/leptonlib-1.79.0/src/bmpio.c:265:9: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(cmapBuf, cdata + BMP_FHBYTES + ihbytes, data/leptonlib-1.79.0/src/bmpio.c:299:13: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(data, fdata, fdatabpl); data/leptonlib-1.79.0/src/bmpio.c:345:17: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(&pel, fdata, 3); data/leptonlib-1.79.0/src/bmpio.c:356:21: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(&pel, fdata, 1); data/leptonlib-1.79.0/src/bmpio.c:582:9: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(fdata + BMP_FHBYTES + BMP_IHBYTES, cta, cmaplen); data/leptonlib-1.79.0/src/bmpio.c:600:13: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(fmdata, data, fBpl); data/leptonlib-1.79.0/src/bmpio.c:621:17: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(fmdata, &pel, 3); data/leptonlib-1.79.0/src/bmpio.c:626:21: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(fmdata, &pel, 1); data/leptonlib-1.79.0/src/boxbasic.c:2062:15: [2] (tmpfile) tmpfile: Function tmpfile() has a security flaw on some systems (e.g., older System V systems) (CWE-377). if ((fp = tmpfile()) == NULL) data/leptonlib-1.79.0/src/boxbasic.c:2345:15: [2] (tmpfile) tmpfile: Function tmpfile() has a security flaw on some systems (e.g., older System V systems) (CWE-377). if ((fp = tmpfile()) == NULL) data/leptonlib-1.79.0/src/boxfunc4.c:1348:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[32]; data/leptonlib-1.79.0/src/boxfunc5.c:1235:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[128]; data/leptonlib-1.79.0/src/boxfunc5.c:1684:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[128], titlebuf[128]; data/leptonlib-1.79.0/src/boxfunc5.c:1815:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[128], titlebuf[128]; data/leptonlib-1.79.0/src/bytearray.c:141:5: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(ba->data, data, size); data/leptonlib-1.79.0/src/bytearray.c:198:5: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(ba->data, data, nbytes); data/leptonlib-1.79.0/src/bytearray.c:387:5: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(ba->data + size, newdata, newbytes); data/leptonlib-1.79.0/src/bytearray.c:420:5: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(ba->data + size, str, len); data/leptonlib-1.79.0/src/ccbord.c:2264:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char strbuf[256]; data/leptonlib-1.79.0/src/ccbord.c:2410:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char strbuf[256]; data/leptonlib-1.79.0/src/ccbord.c:2441:5: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(strbuf, dataout, offset); data/leptonlib-1.79.0/src/ccbord.c:2454:5: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(&width, dataout + offset, 4); data/leptonlib-1.79.0/src/ccbord.c:2456:5: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(&height, dataout + offset, 4); data/leptonlib-1.79.0/src/ccbord.c:2466:9: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(&xoff, dataout + offset, 4); data/leptonlib-1.79.0/src/ccbord.c:2468:9: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(&yoff, dataout + offset, 4); data/leptonlib-1.79.0/src/ccbord.c:2470:9: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(&w, dataout + offset, 4); data/leptonlib-1.79.0/src/ccbord.c:2472:9: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(&h, dataout + offset, 4); data/leptonlib-1.79.0/src/ccbord.c:2479:9: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(&nb, dataout + offset, 4); data/leptonlib-1.79.0/src/ccbord.c:2486:13: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(&startx, dataout + offset, 4); data/leptonlib-1.79.0/src/ccbord.c:2488:13: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(&starty, dataout + offset, 4); data/leptonlib-1.79.0/src/ccbord.c:2564:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char smallbuf[256]; data/leptonlib-1.79.0/src/ccthin.c:465:9: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[32]; data/leptonlib-1.79.0/src/checkerboard.c:80:14: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. static const char selnames[64] = "s_diag1 s_diag2 s_cross1 s_cross2"; data/leptonlib-1.79.0/src/classapp.c:108:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char filename[L_BUF_SIZE]; data/leptonlib-1.79.0/src/classapp.c:190:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char filename[L_BUF_SIZE]; data/leptonlib-1.79.0/src/colormap.c:261:5: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(cmapd->array, cmaps->array, cmaps->n * sizeof(RGBA_QUAD)); data/leptonlib-1.79.0/src/colormap.c:1843:15: [2] (tmpfile) tmpfile: Function tmpfile() has a security flaw on some systems (e.g., older System V systems) (CWE-377). if ((fp = tmpfile()) == NULL) data/leptonlib-1.79.0/src/colormap.c:2076:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[4]; data/leptonlib-1.79.0/src/colorquant1.c:1059:13: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(buf1r, buf2r, 4 * w); data/leptonlib-1.79.0/src/colorquant1.c:1060:13: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(buf1g, buf2g, 4 * w); data/leptonlib-1.79.0/src/colorquant1.c:1061:13: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(buf1b, buf2b, 4 * w); data/leptonlib-1.79.0/src/colorquant1.c:2054:9: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(buf1r, buf2r, 4 * w); data/leptonlib-1.79.0/src/colorquant1.c:2055:9: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(buf1g, buf2g, 4 * w); data/leptonlib-1.79.0/src/colorquant1.c:2056:9: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(buf1b, buf2b, 4 * w); data/leptonlib-1.79.0/src/colorquant2.c:1071:13: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(buf1r, buf2r, 4 * w); data/leptonlib-1.79.0/src/colorquant2.c:1072:13: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(buf1g, buf2g, 4 * w); data/leptonlib-1.79.0/src/colorquant2.c:1073:13: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(buf1b, buf2b, 4 * w); data/leptonlib-1.79.0/src/compare.c:891:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[64]; data/leptonlib-1.79.0/src/compare.c:1000:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[64]; data/leptonlib-1.79.0/src/compare.c:2275:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[64]; data/leptonlib-1.79.0/src/compare.c:2525:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[64]; data/leptonlib-1.79.0/src/compare.c:2736:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf1[128], buf2[128]; data/leptonlib-1.79.0/src/compare.c:3039:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[64]; data/leptonlib-1.79.0/src/compare.c:3591:9: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[128]; data/leptonlib-1.79.0/src/convertfiles.c:81:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[512]; data/leptonlib-1.79.0/src/dewarp1.c:1415:15: [2] (tmpfile) tmpfile: Function tmpfile() has a security flaw on some systems (e.g., older System V systems) (CWE-377). if ((fp = tmpfile()) == NULL) data/leptonlib-1.79.0/src/dewarp1.c:1692:15: [2] (tmpfile) tmpfile: Function tmpfile() has a security flaw on some systems (e.g., older System V systems) (CWE-377). if ((fp = tmpfile()) == NULL) data/leptonlib-1.79.0/src/dewarp2.c:775:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[64]; data/leptonlib-1.79.0/src/dewarp2.c:1640:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[64]; data/leptonlib-1.79.0/src/dewarp4.c:920:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[256]; data/leptonlib-1.79.0/src/dewarp4.c:1015:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char fname[256]; data/leptonlib-1.79.0/src/dewarp4.c:1105:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char bufstr[256]; data/leptonlib-1.79.0/src/encoding.c:347:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char outbuf[8]; data/leptonlib-1.79.0/src/enhance.c:1840:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[64]; data/leptonlib-1.79.0/src/fhmtauto.c:262:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char bigbuf[L_BUF_SIZE]; data/leptonlib-1.79.0/src/fhmtauto.c:288:5: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, "PIX *pixHMTDwa_%d(PIX *pixd, PIX *pixs, " data/leptonlib-1.79.0/src/fhmtauto.c:291:5: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, "PIX *pixFHMTGen_%d(PIX *pixd, PIX *pixs, " data/leptonlib-1.79.0/src/fhmtauto.c:294:5: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, "l_int32 fhmtgen_low_%d(l_uint32 *datad, l_int32 w,\n" data/leptonlib-1.79.0/src/fhmtauto.c:299:5: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, " * PIX *pixHMTDwa_%d()", fileindex); data/leptonlib-1.79.0/src/fhmtauto.c:301:5: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, " * PIX *pixFHMTGen_%d()", fileindex); data/leptonlib-1.79.0/src/fhmtauto.c:303:5: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, " * \\brief pixHMTDwa_%d()", fileindex); data/leptonlib-1.79.0/src/fhmtauto.c:305:5: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, " * \\brief pixFHMTGen_%d()", fileindex); data/leptonlib-1.79.0/src/fhmtauto.c:307:5: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, "pixHMTDwa_%d(PIX *pixd,", fileindex); data/leptonlib-1.79.0/src/fhmtauto.c:309:5: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, "pixFHMTGen_%d(PIX *pixd,", fileindex); data/leptonlib-1.79.0/src/fhmtauto.c:311:5: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, " PROCNAME(\"pixHMTDwa_%d\");", fileindex); data/leptonlib-1.79.0/src/fhmtauto.c:313:5: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, " PROCNAME(\"pixFHMTGen_%d\");", fileindex); data/leptonlib-1.79.0/src/fhmtauto.c:315:5: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, " pixt2 = pixFHMTGen_%d(NULL, pixt1, selname);", data/leptonlib-1.79.0/src/fhmtauto.c:318:5: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, data/leptonlib-1.79.0/src/fhmtauto.c:322:5: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, data/leptonlib-1.79.0/src/fhmtauto.c:348:5: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, "\nstatic l_int32 NUM_SELS_GENERATED = %d;", nsels); data/leptonlib-1.79.0/src/fhmtauto.c:350:5: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, "static char SEL_NAMES[][80] = {"); data/leptonlib-1.79.0/src/fhmtauto.c:441:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char bigbuf[L_BUF_SIZE]; data/leptonlib-1.79.0/src/fhmtauto.c:474:9: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, "fhmt_%d_%d", fileindex, i); data/leptonlib-1.79.0/src/fhmtauto.c:487:5: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, " * l_int32 fhmtgen_low_%d()", data/leptonlib-1.79.0/src/fhmtauto.c:490:5: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, " * void fhmt_%d_*()", fileindex); data/leptonlib-1.79.0/src/fhmtauto.c:521:5: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, " * fhmtgen_low_%d()", fileindex); data/leptonlib-1.79.0/src/fhmtauto.c:523:5: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, "fhmtgen_low_%d(l_uint32 *datad,", fileindex); data/leptonlib-1.79.0/src/fhmtauto.c:538:9: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, " case %d:", i); data/leptonlib-1.79.0/src/fhmtauto.c:706:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char bigbuf[L_BUF_SIZE]; data/leptonlib-1.79.0/src/fhmtauto.c:757:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char bigbuf[L_BUF_SIZE]; data/leptonlib-1.79.0/src/fhmtauto.c:770:13: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, "(*sptr)"); data/leptonlib-1.79.0/src/fhmtauto.c:776:13: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, "((*(sptr) >> %d) | (*(sptr - 1) << %d))", data/leptonlib-1.79.0/src/fhmtauto.c:779:13: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, "((*(sptr) << %d) | (*(sptr + 1) >> %d))", data/leptonlib-1.79.0/src/fhmtauto.c:795:13: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, "(~*sptr)"); data/leptonlib-1.79.0/src/fhmtauto.c:801:13: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, "((~*(sptr) >> %d) | (~*(sptr - 1) << %d))", data/leptonlib-1.79.0/src/fhmtauto.c:804:13: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, "((~*(sptr) << %d) | (~*(sptr + 1) >> %d))", data/leptonlib-1.79.0/src/finditalic.c:122:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char opstring[32]; data/leptonlib-1.79.0/src/fmorphauto.c:297:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char bigbuf[L_BUF_SIZE]; data/leptonlib-1.79.0/src/fmorphauto.c:323:5: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, "PIX *pixMorphDwa_%d(PIX *pixd, PIX *pixs, " data/leptonlib-1.79.0/src/fmorphauto.c:326:5: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, "PIX *pixFMorphopGen_%d(PIX *pixd, PIX *pixs, " data/leptonlib-1.79.0/src/fmorphauto.c:329:5: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, "l_int32 fmorphopgen_low_%d(l_uint32 *datad, l_int32 w,\n" data/leptonlib-1.79.0/src/fmorphauto.c:334:5: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, " * PIX *pixMorphDwa_%d()", fileindex); data/leptonlib-1.79.0/src/fmorphauto.c:336:5: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, " * PIX *pixFMorphopGen_%d()", fileindex); data/leptonlib-1.79.0/src/fmorphauto.c:338:5: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, " * \\brief pixMorphDwa_%d()", fileindex); data/leptonlib-1.79.0/src/fmorphauto.c:340:5: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, " * \\brief pixFMorphopGen_%d()", fileindex); data/leptonlib-1.79.0/src/fmorphauto.c:342:5: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, "pixMorphDwa_%d(PIX *pixd,", fileindex); data/leptonlib-1.79.0/src/fmorphauto.c:344:5: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, "pixFMorphopGen_%d(PIX *pixd,", fileindex); data/leptonlib-1.79.0/src/fmorphauto.c:346:5: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, " PROCNAME(\"pixMorphDwa_%d\");", fileindex); data/leptonlib-1.79.0/src/fmorphauto.c:348:5: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, " PROCNAME(\"pixFMorphopGen_%d\");", fileindex); data/leptonlib-1.79.0/src/fmorphauto.c:350:5: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, data/leptonlib-1.79.0/src/fmorphauto.c:354:5: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, data/leptonlib-1.79.0/src/fmorphauto.c:358:5: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, data/leptonlib-1.79.0/src/fmorphauto.c:362:5: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, data/leptonlib-1.79.0/src/fmorphauto.c:366:5: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, data/leptonlib-1.79.0/src/fmorphauto.c:370:5: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, data/leptonlib-1.79.0/src/fmorphauto.c:396:5: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, "\nstatic l_int32 NUM_SELS_GENERATED = %d;", nsels); data/leptonlib-1.79.0/src/fmorphauto.c:398:5: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, "static char SEL_NAMES[][80] = {"); data/leptonlib-1.79.0/src/fmorphauto.c:500:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char bigbuf[L_BUF_SIZE]; data/leptonlib-1.79.0/src/fmorphauto.c:532:9: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, "fdilate_%d_%d", fileindex, i); data/leptonlib-1.79.0/src/fmorphauto.c:534:9: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, "ferode_%d_%d", fileindex, i); data/leptonlib-1.79.0/src/fmorphauto.c:547:5: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, " * l_int32 fmorphopgen_low_%d()", data/leptonlib-1.79.0/src/fmorphauto.c:550:5: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, " * void fdilate_%d_*()", fileindex); data/leptonlib-1.79.0/src/fmorphauto.c:552:5: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, " * void ferode_%d_*()", fileindex); data/leptonlib-1.79.0/src/fmorphauto.c:584:5: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, " * fmorphopgen_low_%d()", fileindex); data/leptonlib-1.79.0/src/fmorphauto.c:586:5: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, "fmorphopgen_low_%d(l_uint32 *datad,", fileindex); data/leptonlib-1.79.0/src/fmorphauto.c:601:9: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, " case %d:", i); data/leptonlib-1.79.0/src/fmorphauto.c:767:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char bigbuf[L_BUF_SIZE]; data/leptonlib-1.79.0/src/fmorphauto.c:840:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char bigbuf[L_BUF_SIZE]; data/leptonlib-1.79.0/src/fmorphauto.c:852:9: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, "(*sptr)"); data/leptonlib-1.79.0/src/fmorphauto.c:858:9: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, "((*(sptr) >> %d) | (*(sptr - 1) << %d))", data/leptonlib-1.79.0/src/fmorphauto.c:861:9: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(bigbuf, "((*(sptr) << %d) | (*(sptr + 1) >> %d))", data/leptonlib-1.79.0/src/fpix1.c:304:9: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(datad, datas, bytes); data/leptonlib-1.79.0/src/fpix1.c:315:5: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(datad, datas, bytes); data/leptonlib-1.79.0/src/fpix1.c:1304:9: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(datad, datas, bytes); data/leptonlib-1.79.0/src/fpix1.c:1315:5: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(datad, datas, bytes); data/leptonlib-1.79.0/src/fpix1.c:1740:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[256]; data/leptonlib-1.79.0/src/fpix1.c:1925:15: [2] (tmpfile) tmpfile: Function tmpfile() has a security flaw on some systems (e.g., older System V systems) (CWE-377). if ((fp = tmpfile()) == NULL) data/leptonlib-1.79.0/src/fpix1.c:2038:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[256]; data/leptonlib-1.79.0/src/fpix1.c:2223:15: [2] (tmpfile) tmpfile: Function tmpfile() has a security flaw on some systems (e.g., older System V systems) (CWE-377). if ((fp = tmpfile()) == NULL) data/leptonlib-1.79.0/src/fpix2.c:1944:9: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(buffer, line, bpl); data/leptonlib-1.79.0/src/fpix2.c:2006:9: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(buffer, linet, bpl); data/leptonlib-1.79.0/src/fpix2.c:2007:9: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(linet, lineb, bpl); data/leptonlib-1.79.0/src/fpix2.c:2008:9: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(lineb, buffer, bpl); data/leptonlib-1.79.0/src/gifio.c:206:5: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(dest, buffer->cdata + buffer->pos, bytesRead); data/leptonlib-1.79.0/src/gifio.c:665:17: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(lined, lines, 4 * wpl); data/leptonlib-1.79.0/src/gplot.c:194:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[Bufsize]; data/leptonlib-1.79.0/src/gplot.c:327:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[Bufsize]; data/leptonlib-1.79.0/src/gplot.c:469:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[Bufsize]; data/leptonlib-1.79.0/src/gplot.c:512:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[Bufsize]; data/leptonlib-1.79.0/src/gplot.c:633:19: [2] (misc) fopen: Check when opening files - can an attacker redirect it (via symlinks), force the opening of special file type (e.g., device files), move things around to create a race condition, control its ancestors, or change its contents? (CWE-362). if ((fp = fopen(dataname, "w")) == NULL) data/leptonlib-1.79.0/src/gplot.c:780:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[64]; data/leptonlib-1.79.0/src/gplot.c:824:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[64]; data/leptonlib-1.79.0/src/gplot.c:867:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[64]; data/leptonlib-1.79.0/src/gplot.c:1242:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[Bufsize]; data/leptonlib-1.79.0/src/grayquant.c:285:5: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(bufs2, datas, 4 * wpls); /* prime the buffer */ data/leptonlib-1.79.0/src/grayquant.c:287:9: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(bufs1, bufs2, 4 * wpls); data/leptonlib-1.79.0/src/grayquant.c:288:9: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(bufs2, datas + (i + 1) * wpls, 4 * wpls); data/leptonlib-1.79.0/src/grayquant.c:294:5: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(bufs1, bufs2, 4 * wpls); data/leptonlib-1.79.0/src/grayquant.c:1152:5: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(bufs2, datas, 4 * wpls); /* prime the buffer */ data/leptonlib-1.79.0/src/grayquant.c:1154:9: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(bufs1, bufs2, 4 * wpls); data/leptonlib-1.79.0/src/grayquant.c:1155:9: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(bufs2, datas + (i + 1) * wpls, 4 * wpls); data/leptonlib-1.79.0/src/grayquant.c:1161:5: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(bufs1, bufs2, 4 * wpls); data/leptonlib-1.79.0/src/grayquant.c:2744:5: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(bufs2, datas, 4 * wpls); /* prime the buffer */ data/leptonlib-1.79.0/src/grayquant.c:2746:9: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(bufs1, bufs2, 4 * wpls); data/leptonlib-1.79.0/src/grayquant.c:2747:9: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(bufs2, datas + (i + 1) * wpls, 4 * wpls); data/leptonlib-1.79.0/src/grayquant.c:2754:5: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(bufs1, bufs2, 4 * wpls); data/leptonlib-1.79.0/src/jbclass.c:1951:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[L_BUF_SIZE]; data/leptonlib-1.79.0/src/jbclass.c:2010:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char fname[L_BUF_SIZE]; data/leptonlib-1.79.0/src/jp2kio.c:860:15: [2] (tmpfile) tmpfile: Function tmpfile() has a security flaw on some systems (e.g., older System V systems) (CWE-377). if ((fp = tmpfile()) == NULL) data/leptonlib-1.79.0/src/jpegio.c:1160:15: [2] (tmpfile) tmpfile: Function tmpfile() has a security flaw on some systems (e.g., older System V systems) (CWE-377). if ((fp = tmpfile()) == NULL) data/leptonlib-1.79.0/src/leptwin.c:358:9: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy (bm.bmBits, data, imageBitsSize); data/leptonlib-1.79.0/src/libversions.c:104:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[128]; data/leptonlib-1.79.0/src/libversions.c:126:5: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buffer[JMSG_LENGTH_MAX]; data/leptonlib-1.79.0/src/libversions.c:181:5: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[32]; data/leptonlib-1.79.0/src/morphseq.c:142:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char fname[256]; data/leptonlib-1.79.0/src/morphseq.c:309:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char fname[256]; data/leptonlib-1.79.0/src/morphseq.c:458:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char fname[256]; data/leptonlib-1.79.0/src/morphseq.c:607:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char fname[256]; data/leptonlib-1.79.0/src/morphseq.c:920:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char fname[256]; data/leptonlib-1.79.0/src/morphseq.c:1123:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char fname[256]; data/leptonlib-1.79.0/src/numabasic.c:1039:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char fmt[32], strbuf[64]; data/leptonlib-1.79.0/src/numabasic.c:1360:15: [2] (tmpfile) tmpfile: Function tmpfile() has a security flaw on some systems (e.g., older System V systems) (CWE-377). if ((fp = tmpfile()) == NULL) data/leptonlib-1.79.0/src/numabasic.c:2051:15: [2] (tmpfile) tmpfile: Function tmpfile() has a security flaw on some systems (e.g., older System V systems) (CWE-377). if ((fp = tmpfile()) == NULL) data/leptonlib-1.79.0/src/pageseg.c:967:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[64]; data/leptonlib-1.79.0/src/pageseg.c:1105:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[64]; data/leptonlib-1.79.0/src/parseprotos.c:574:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[Bufsize]; data/leptonlib-1.79.0/src/partify.c:128:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[512]; data/leptonlib-1.79.0/src/pdfio2.c:729:13: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(datacomp + nbytescomp, pngcomp + i, n); data/leptonlib-1.79.0/src/pdfio2.c:1675:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[L_SMALLBUF]; data/leptonlib-1.79.0/src/pdfio2.c:1761:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char smallbuf[8]; data/leptonlib-1.79.0/src/pdfio2.c:1925:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buff[256]; data/leptonlib-1.79.0/src/pdfio2.c:1926:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[L_BIGBUF]; data/leptonlib-1.79.0/src/pdfio2.c:2044:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[L_BIGBUF]; data/leptonlib-1.79.0/src/pdfio2.c:2127:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[L_BIGBUF]; data/leptonlib-1.79.0/src/pdfio2.c:2205:5: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(data, lpd->id, sizes[0]); data/leptonlib-1.79.0/src/pdfio2.c:2206:5: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(data + locs[1], lpd->obj1, sizes[1]); data/leptonlib-1.79.0/src/pdfio2.c:2207:5: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(data + locs[2], lpd->obj2, sizes[2]); data/leptonlib-1.79.0/src/pdfio2.c:2208:5: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(data + locs[3], lpd->obj3, sizes[3]); data/leptonlib-1.79.0/src/pdfio2.c:2209:5: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(data + locs[4], lpd->obj4, sizes[4]); data/leptonlib-1.79.0/src/pdfio2.c:2210:5: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(data + locs[5], lpd->obj5, sizes[5]); data/leptonlib-1.79.0/src/pdfio2.c:2223:9: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(data + locs[6 + i], str, len); data/leptonlib-1.79.0/src/pdfio2.c:2224:9: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(data + locs[6 + i] + len, data/leptonlib-1.79.0/src/pdfio2.c:2226:9: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(data + locs[6 + i] + len + cid->nbytescomp, data/leptonlib-1.79.0/src/pdfio2.c:2233:9: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(data + locs[6 + nimages + i], str, strlen(str)); data/leptonlib-1.79.0/src/pdfio2.c:2237:5: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(data + lpd->xrefloc, lpd->trailer, strlen(lpd->trailer)); data/leptonlib-1.79.0/src/pix1.c:694:9: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(pixd->data, pixs->data, bytes); data/leptonlib-1.79.0/src/pix1.c:715:5: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(pixd->data, pixs->data, bytes); data/leptonlib-1.79.0/src/pix1.c:929:9: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(pixGetData(pixd), pixGetData(pixs), nbytes); data/leptonlib-1.79.0/src/pix1.c:1744:9: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(data, datas, bytes); data/leptonlib-1.79.0/src/pix2.c:3133:5: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(datad, datas, 4 * wpl); data/leptonlib-1.79.0/src/pix3.c:1360:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char op[64]; data/leptonlib-1.79.0/src/pix4.c:2787:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char textstr[256]; data/leptonlib-1.79.0/src/pix4.c:3404:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[256]; data/leptonlib-1.79.0/src/pixabasic.c:2847:15: [2] (tmpfile) tmpfile: Function tmpfile() has a security flaw on some systems (e.g., older System V systems) (CWE-377). if ((fp = tmpfile()) == NULL) data/leptonlib-1.79.0/src/pixabasic.c:2874:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[32]; data/leptonlib-1.79.0/src/pixabasic.c:3223:15: [2] (tmpfile) tmpfile: Function tmpfile() has a security flaw on some systems (e.g., older System V systems) (CWE-377). if ((fp = tmpfile()) == NULL) data/leptonlib-1.79.0/src/pixafunc2.c:443:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[16]; data/leptonlib-1.79.0/src/pixafunc2.c:1207:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[128]; data/leptonlib-1.79.0/src/pixafunc2.c:1306:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[128]; data/leptonlib-1.79.0/src/pixafunc2.c:1946:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[8]; data/leptonlib-1.79.0/src/pixafunc2.c:2231:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[64]; data/leptonlib-1.79.0/src/pixafunc2.c:2323:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char rootpath[256]; data/leptonlib-1.79.0/src/pixcomp.c:420:5: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(datad, datas, size); data/leptonlib-1.79.0/src/pixcomp.c:1682:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[256]; data/leptonlib-1.79.0/src/pixcomp.c:1926:15: [2] (tmpfile) tmpfile: Function tmpfile() has a security flaw on some systems (e.g., older System V systems) (CWE-377). if ((fp = tmpfile()) == NULL) data/leptonlib-1.79.0/src/pixcomp.c:2405:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[128]; data/leptonlib-1.79.0/src/pixcomp.c:2445:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[128]; data/leptonlib-1.79.0/src/pngio.c:1354:13: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(last->m_Buffer, data, len); data/leptonlib-1.79.0/src/pngio.c:1380:13: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(last->m_Buffer + last->m_Count, data + written, data/leptonlib-1.79.0/src/pngio.c:1385:13: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(last->m_Buffer + last->m_Count, data + written, data/leptonlib-1.79.0/src/pngio.c:1427:5: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(data, pthing->m_Buffer, pthing->m_Count); data/leptonlib-1.79.0/src/pngio.c:1438:9: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(data + copied, buffer->m_Buffer, buffer->m_Count); data/leptonlib-1.79.0/src/pngio.c:1479:5: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(outBytes, thing->m_Buffer + thing->m_Count, byteCountToRead); data/leptonlib-1.79.0/src/pnmio.c:566:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char tag[16], tupltype[32]; data/leptonlib-1.79.0/src/pnmio.c:859:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buffer[256]; data/leptonlib-1.79.0/src/pnmio.c:1257:15: [2] (tmpfile) tmpfile: Function tmpfile() has a security flaw on some systems (e.g., older System V systems) (CWE-377). if ((fp = tmpfile()) == NULL) data/leptonlib-1.79.0/src/pnmio.c:1312:15: [2] (tmpfile) tmpfile: Function tmpfile() has a security flaw on some systems (e.g., older System V systems) (CWE-377). if ((fp = tmpfile()) == NULL) data/leptonlib-1.79.0/src/pnmio.c:1379:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[8]; data/leptonlib-1.79.0/src/psio2.c:464:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char bigbuf[Bufsize]; data/leptonlib-1.79.0/src/psio2.c:961:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char bigbuf[Bufsize]; data/leptonlib-1.79.0/src/psio2.c:1353:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char bigbuf[Bufsize]; data/leptonlib-1.79.0/src/psio2.c:1829:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char bigbuf[Bufsize]; data/leptonlib-1.79.0/src/ptabasic.c:695:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char typestr[128]; /* hardcoded below in fscanf */ data/leptonlib-1.79.0/src/ptabasic.c:919:15: [2] (tmpfile) tmpfile: Function tmpfile() has a security flaw on some systems (e.g., older System V systems) (CWE-377). if ((fp = tmpfile()) == NULL) data/leptonlib-1.79.0/src/ptabasic.c:1544:15: [2] (tmpfile) tmpfile: Function tmpfile() has a security flaw on some systems (e.g., older System V systems) (CWE-377). if ((fp = tmpfile()) == NULL) data/leptonlib-1.79.0/src/ptafunc1.c:1814:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buffer[128]; data/leptonlib-1.79.0/src/quadtree.c:662:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[256]; data/leptonlib-1.79.0/src/readfile.c:98:23: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. static const unsigned char JP2K_CODESTREAM[4] = { 0xff, 0x4f, 0xff, 0x51 }; data/leptonlib-1.79.0/src/readfile.c:99:23: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. static const unsigned char JP2K_IMAGE_DATA[12] = { 0x00, 0x00, 0x00, 0x0C, data/leptonlib-1.79.0/src/recogbasic.c:1094:15: [2] (tmpfile) tmpfile: Function tmpfile() has a security flaw on some systems (e.g., older System V systems) (CWE-377). if ((fp = tmpfile()) == NULL) data/leptonlib-1.79.0/src/recogdid.c:678:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char textstr[16]; data/leptonlib-1.79.0/src/recogident.c:259:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[32]; data/leptonlib-1.79.0/src/recogident.c:837:9: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[128]; data/leptonlib-1.79.0/src/recogident.c:1773:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[128]; data/leptonlib-1.79.0/src/recogtrain.c:1716:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char str[4]; data/leptonlib-1.79.0/src/recogtrain.c:1990:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[128]; data/leptonlib-1.79.0/src/recogtrain.c:2228:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[16]; data/leptonlib-1.79.0/src/recogtrain.c:2286:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[64]; data/leptonlib-1.79.0/src/recogtrain.c:2436:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[32]; data/leptonlib-1.79.0/src/regutils.c:128:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char errormsg[64]; data/leptonlib-1.79.0/src/regutils.c:211:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char result[512]; data/leptonlib-1.79.0/src/regutils.c:322:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[256]; data/leptonlib-1.79.0/src/regutils.c:501:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char namebuf[256]; data/leptonlib-1.79.0/src/regutils.c:609:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char namebuf[256]; data/leptonlib-1.79.0/src/regutils.c:700:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char namebuf[256]; data/leptonlib-1.79.0/src/regutils.c:771:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char namebuf[256]; data/leptonlib-1.79.0/src/regutils.c:821:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[64]; data/leptonlib-1.79.0/src/rotateorth.c:479:17: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(buffer, line, bpl); data/leptonlib-1.79.0/src/rotateorth.c:487:17: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(buffer, line, bpl); data/leptonlib-1.79.0/src/rotateorth.c:497:17: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(buffer, line, bpl); data/leptonlib-1.79.0/src/rotateorth.c:516:17: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(buffer, line, bpl); data/leptonlib-1.79.0/src/rotateorth.c:535:17: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(buffer, line, bpl); data/leptonlib-1.79.0/src/rotateorth.c:554:17: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(buffer, line, bpl); data/leptonlib-1.79.0/src/rotateorth.c:635:9: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(buffer, linet, bpl); data/leptonlib-1.79.0/src/rotateorth.c:636:9: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(linet, lineb, bpl); data/leptonlib-1.79.0/src/rotateorth.c:637:9: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(lineb, buffer, bpl); data/leptonlib-1.79.0/src/sarray1.c:852:9: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(dest + index, src, len); data/leptonlib-1.79.0/src/sarray1.c:1589:15: [2] (tmpfile) tmpfile: Function tmpfile() has a security flaw on some systems (e.g., older System V systems) (CWE-377). if ((fp = tmpfile()) == NULL) data/leptonlib-1.79.0/src/sarray1.c:1869:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char dir[PATH_MAX + 1]; data/leptonlib-1.79.0/src/sarray2.c:653:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[32]; data/leptonlib-1.79.0/src/scale1.c:1049:5: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(bufs, datas, 4 * wpls); /* first src line */ data/leptonlib-1.79.0/src/scale1.c:1050:5: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(bufs + wpls, datas + wpls, 4 * wpls); /* 2nd src line */ data/leptonlib-1.79.0/src/scale1.c:1059:9: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(bufs, datas + i * wpls, 4 * wpls); /* i-th src line */ data/leptonlib-1.79.0/src/scale1.c:1060:9: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(bufs + wpls, datas + (i + 1) * wpls, 4 * wpls); data/leptonlib-1.79.0/src/scale1.c:1061:9: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(linebp, lineb + wplb, 4 * wplb); data/leptonlib-1.79.0/src/scale1.c:1073:5: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(bufs, datas + hsm * wpls, 4 * wpls); /* hsm-th src line */ data/leptonlib-1.79.0/src/scale1.c:1074:5: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(linebp, lineb + wplb, 4 * wplb); /* 1 i line */ data/leptonlib-1.79.0/src/scale1.c:1256:5: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(bufs, datas, 4 * wpls); /* first src line */ data/leptonlib-1.79.0/src/scale1.c:1257:5: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(bufs + wpls, datas + wpls, 4 * wpls); /* 2nd src line */ data/leptonlib-1.79.0/src/scale1.c:1268:9: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(bufs, datas + i * wpls, 4 * wpls); /* i-th src line */ data/leptonlib-1.79.0/src/scale1.c:1269:9: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(bufs + wpls, datas + (i + 1) * wpls, 4 * wpls); data/leptonlib-1.79.0/src/scale1.c:1270:9: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(linebp, lineb + 3 * wplb, 4 * wplb); data/leptonlib-1.79.0/src/scale1.c:1284:5: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(bufs, datas + hsm * wpls, 4 * wpls); /* hsm-th src line */ data/leptonlib-1.79.0/src/scale1.c:1285:5: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(linebp, lineb + 3 * wplb, 4 * wplb); /* 1 b line */ data/leptonlib-1.79.0/src/scale1.c:3162:13: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(lined, prevlined, 4 * wpld); data/leptonlib-1.79.0/src/scale1.c:3747:13: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(lined, prevlined, 4 * wpld); data/leptonlib-1.79.0/src/scale2.c:922:17: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(lined + k * wpld, lined, 4 * wpld); data/leptonlib-1.79.0/src/scale2.c:936:17: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(lined + k * wpld, lined, 4 * wpld); data/leptonlib-1.79.0/src/scale2.c:950:17: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(lined + k * wpld, lined, 4 * wpld); data/leptonlib-1.79.0/src/scale2.c:964:17: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(lined + k * wpld, lined, 4 * wpld); data/leptonlib-1.79.0/src/scale2.c:978:17: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(lined + k * wpld, lined, 4 * wpld); data/leptonlib-1.79.0/src/sel1.c:165:5: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char selnameh1[20]; data/leptonlib-1.79.0/src/sel1.c:166:5: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char selnameh2[20]; data/leptonlib-1.79.0/src/sel1.c:167:5: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char selnamev1[20]; data/leptonlib-1.79.0/src/sel1.c:168:5: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char selnamev2[20]; data/leptonlib-1.79.0/src/sel1.c:991:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char combname[256]; data/leptonlib-1.79.0/src/sel1.c:1054:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[256]; data/leptonlib-1.79.0/src/sel1.c:1422:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char linebuf[256]; data/leptonlib-1.79.0/src/sel2.c:101:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char name[L_BUF_SIZE]; data/leptonlib-1.79.0/src/sel2.c:328:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char name[L_BUF_SIZE]; data/leptonlib-1.79.0/src/sel2.c:370:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char name[L_BUF_SIZE]; data/leptonlib-1.79.0/src/sel2.c:436:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char name[L_BUF_SIZE]; data/leptonlib-1.79.0/src/sel2.c:561:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char name[L_BUF_SIZE]; data/leptonlib-1.79.0/src/spixio.c:398:9: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(data + 6, cdata, 4 * ncolors); data/leptonlib-1.79.0/src/spixio.c:401:5: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(data + index + 1, rdata, rdatasize); data/leptonlib-1.79.0/src/spixio.c:488:5: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(imdata, data + 7 + ncolors, imdata_size); data/leptonlib-1.79.0/src/stringcode.c:102:5: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char type[16]; /* e.g., "PIXA" */ data/leptonlib-1.79.0/src/stringcode.c:103:5: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char structname[16]; /* e.g., "Pixa" */ data/leptonlib-1.79.0/src/stringcode.c:104:5: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char reader[16]; /* e.g., "pixaRead" */ data/leptonlib-1.79.0/src/stringcode.c:105:5: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char memreader[20]; /* e.g., "pixaReadMem" */ data/leptonlib-1.79.0/src/stringcode.c:343:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[256]; data/leptonlib-1.79.0/src/stringcode.c:652:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[256]; data/leptonlib-1.79.0/src/stringcode.c:707:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[80]; data/leptonlib-1.79.0/src/stringcode.c:758:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[256]; data/leptonlib-1.79.0/src/stringcode.c:793:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[256]; data/leptonlib-1.79.0/src/strokes.c:306:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[32]; data/leptonlib-1.79.0/src/strokes.c:406:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[16]; data/leptonlib-1.79.0/src/textops.c:655:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char textstr[128]; data/leptonlib-1.79.0/src/tiffio.c:564:13: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(data, linebuf, tiffbpl); data/leptonlib-1.79.0/src/tiffio.c:1107:13: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(linebuf, data, tiffbpl); data/leptonlib-1.79.0/src/tiffio.c:2163:5: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(data, inarray + 8, nbytes); data/leptonlib-1.79.0/src/tiffio.c:2364:5: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(data, mstream->buffer + mstream->offset, amount); data/leptonlib-1.79.0/src/tiffio.c:2390:5: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(mstream->buffer + mstream->offset, data, length); data/leptonlib-1.79.0/src/tiffio.c:2744:15: [2] (tmpfile) tmpfile: Function tmpfile() has a security flaw on some systems (e.g., older System V systems) (CWE-377). if ((fp = tmpfile()) == NULL) data/leptonlib-1.79.0/src/utils1.c:151:31: [2] (integer) atoi: Unless checked, the resulting number can exceed the expected range (CWE-190). If source untrusted, check both minimum and maximum, even if the input had no minus sign (large numbers can roll over into negative number; consider saving to an unsigned value if that is intended). LeptMsgSeverity = atoi(envsev); data/leptonlib-1.79.0/src/utils1.c:308:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char msg[MAX_DEBUG_MESSAGE]; data/leptonlib-1.79.0/src/utils1.c:1305:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[128] = "", sep = 'Z'; data/leptonlib-1.79.0/src/utils1.c:1354:5: [2] (buffer) sprintf: Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or vsnprintf. Risk is low because the source has a constant maximum length. sprintf(buf + 14, "%c%02d'%02d'", sep, relh, relm); data/leptonlib-1.79.0/src/utils2.c:966:5: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(dest, src, npre); data/leptonlib-1.79.0/src/utils2.c:1331:5: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(newdata, indata, minsize); data/leptonlib-1.79.0/src/utils2.c:1440:9: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(data, bb->array, bb->n); data/leptonlib-1.79.0/src/utils2.c:1572:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char actualOperation[20]; data/leptonlib-1.79.0/src/utils2.c:1683:5: [2] (buffer) memcpy: Does not check for buffer overflows when copying to destination (CWE-120). Make sure destination can always hold the source data. memcpy(datad, datas, size); data/leptonlib-1.79.0/src/utils2.c:1832:10: [2] (misc) fopen: Check when opening files - can an attacker redirect it (via symlinks), force the opening of special file type (e.g., device files), move things around to create a race condition, control its ancestors, or change its contents? (CWE-362). fp = fopen(fname, "rb"); data/leptonlib-1.79.0/src/utils2.c:1838:10: [2] (misc) fopen: Check when opening files - can an attacker redirect it (via symlinks), force the opening of special file type (e.g., device files), move things around to create a race condition, control its ancestors, or change its contents? (CWE-362). fp = fopen(tail, "rb"); data/leptonlib-1.79.0/src/utils2.c:1875:10: [2] (misc) fopen: Check when opening files - can an attacker redirect it (via symlinks), force the opening of special file type (e.g., device files), move things around to create a race condition, control its ancestors, or change its contents? (CWE-362). fp = fopen(fname, modestring); data/leptonlib-1.79.0/src/utils2.c:1916:15: [2] (tmpfile) tmpfile: Function tmpfile() has a security flaw on some systems (e.g., older System V systems) (CWE-377). if ((fp = tmpfile()) == NULL) data/leptonlib-1.79.0/src/utils2.c:2320:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char tempdir[256]; data/leptonlib-1.79.0/src/utils2.c:2370:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char newtemp[256]; data/leptonlib-1.79.0/src/utils2.c:2467:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char newtemp[256]; data/leptonlib-1.79.0/src/utils2.c:2566:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char newtemp[256]; data/leptonlib-1.79.0/src/utils2.c:2788:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char empty[4] = ""; data/leptonlib-1.79.0/src/utils2.c:3108:9: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char tmpdir[MAX_PATH]; data/leptonlib-1.79.0/src/utils2.c:3282:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char dirname[240]; data/leptonlib-1.79.0/src/utils2.c:3294:10: [2] (tmpfile) mkstemp: Potential for temporary file vulnerability in some circumstances. Some older Unix-like systems create temp files with permission to write by all by default, so be sure to set the umask to override this. Also, some older Unix systems might fail to use O_EXCL when opening the file, so make sure that O_EXCL is used by the library (CWE-377). fd = mkstemp(pattern); data/leptonlib-1.79.0/src/utils2.c:3304:5: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char fname[MAX_PATH]; data/leptonlib-1.79.0/src/utils2.c:3308:15: [2] (misc) fopen: Check when opening files - can an attacker redirect it (via symlinks), force the opening of special file type (e.g., device files), move things around to create a race condition, control its ancestors, or change its contents? (CWE-362). if ((fp = fopen(fname, "wb")) == NULL) data/leptonlib-1.79.0/src/writefile.c:150:5: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char extension[8]; data/leptonlib-1.79.0/src/writefile.c:255:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char bigbuf[Bufsize]; data/leptonlib-1.79.0/src/writefile.c:914:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buffer[Bufsize]; data/leptonlib-1.79.0/src/writefile.c:924:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char fullpath[_MAX_PATH]; data/leptonlib-1.79.0/src/writefile.c:1093:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[32]; data/leptonlib-1.79.0/src/writefile.c:1220:1: [2] (buffer) char: Statically-sized arrays can be improperly restricted, leading to potential overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use functions that limit length, or ensure that the size is larger than the maximum possible length. char buf[Bufsize]; data/leptonlib-1.79.0/prog/alltests_reg.c:235:62: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). l_binaryWrite("/tmp/lept/reg_results.txt", "w", str, strlen(str)); data/leptonlib-1.79.0/prog/alltests_reg.c:251:36: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). buf, strlen(buf)); data/leptonlib-1.79.0/prog/alphaops_reg.c:62:42: [1] (buffer) equal: Function does not check the second iterator for over-read conditions (CWE-126). This function is often discouraged by most C++ coding standards in favor of its safer alternatives provided since C++14. Consider using a form of this function that checks the second iterator before potentially overflowing it. l_int32 ncolors, rval, gval, bval, equal; data/leptonlib-1.79.0/prog/alphaops_reg.c:258:32: [1] (buffer) equal: Function does not check the second iterator for over-read conditions (CWE-126). This function is often discouraged by most C++ coding standards in favor of its safer alternatives provided since C++14. Consider using a form of this function that checks the second iterator before potentially overflowing it. cmapEqual(cmap, cmap2, 4, &equal); data/leptonlib-1.79.0/prog/alphaops_reg.c:259:36: [1] (buffer) equal: Function does not check the second iterator for over-read conditions (CWE-126). This function is often discouraged by most C++ coding standards in favor of its safer alternatives provided since C++14. Consider using a form of this function that checks the second iterator before potentially overflowing it. regTestCompareValues(rp, TRUE, equal, 0.0); /* 25 */ data/leptonlib-1.79.0/prog/alphaops_reg.c:270:32: [1] (buffer) equal: Function does not check the second iterator for over-read conditions (CWE-126). This function is often discouraged by most C++ coding standards in favor of its safer alternatives provided since C++14. Consider using a form of this function that checks the second iterator before potentially overflowing it. cmapEqual(cmap, cmap2, 4, &equal); data/leptonlib-1.79.0/prog/alphaops_reg.c:271:36: [1] (buffer) equal: Function does not check the second iterator for over-read conditions (CWE-126). This function is often discouraged by most C++ coding standards in favor of its safer alternatives provided since C++14. Consider using a form of this function that checks the second iterator before potentially overflowing it. regTestCompareValues(rp, TRUE, equal, 0.0); /* 26 */ data/leptonlib-1.79.0/prog/autogen.137.c:78:43: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). data1 = decodeBase64(l_strdata_0, strlen(l_strdata_0), &size1); data/leptonlib-1.79.0/prog/autogen.137.c:85:43: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). data1 = decodeBase64(l_strdata_1, strlen(l_strdata_1), &size1); data/leptonlib-1.79.0/prog/autogentest1.c:76:19: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). strlen(filetext)); data/leptonlib-1.79.0/prog/bytea_reg.c:109:48: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). lba1 = l_byteaInitFromMem((l_uint8 *)str1, strlen(str1)); data/leptonlib-1.79.0/prog/bytea_reg.c:112:48: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). lba1 = l_byteaInitFromMem((l_uint8 *)str1, strlen(str1)); data/leptonlib-1.79.0/prog/displaypixa.c:105:28: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). if (textstr && strlen(textstr) > 0) { data/leptonlib-1.79.0/prog/displaypixa.c:148:31: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). if (bmf && textstr && strlen(textstr) > 0) { data/leptonlib-1.79.0/prog/files_reg.c:148:50: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). regTestCompareStrings(rp, (l_uint8 *)result, strlen(result), data/leptonlib-1.79.0/prog/files_reg.c:149:44: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). (l_uint8 *)path, strlen(path)); data/leptonlib-1.79.0/prog/files_reg.c:272:54: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). regTestCompareStrings(rp, (l_uint8 *)expect, strlen(expect), data/leptonlib-1.79.0/prog/files_reg.c:273:48: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). (l_uint8 *)path, strlen(path)); data/leptonlib-1.79.0/prog/files_reg.c:275:54: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). regTestCompareStrings(rp, (l_uint8 *)result, strlen(result), data/leptonlib-1.79.0/prog/files_reg.c:276:48: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). (l_uint8 *)path, strlen(path)); data/leptonlib-1.79.0/prog/htmlviewer.c:241:41: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). l_binaryWrite(mainname, "w", shtml, strlen(shtml)); data/leptonlib-1.79.0/prog/htmlviewer.c:261:41: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). l_binaryWrite(linkname, "w", slink, strlen(slink)); data/leptonlib-1.79.0/prog/iomisc_reg.c:226:32: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). if (rp->display && text && strlen(text) != 0) data/leptonlib-1.79.0/prog/jpegio_reg.c:256:52: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). regTestCompareStrings(rp, (l_uint8 *)comment1, strlen(comment1), data/leptonlib-1.79.0/prog/jpegio_reg.c:257:37: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). comment2, strlen((char *)comment2)); data/leptonlib-1.79.0/prog/kernel_reg.c:97:62: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). l_binaryWrite("/tmp/lept/regout/kernfile.kel", "w", str, strlen(str)); data/leptonlib-1.79.0/prog/mtiff_reg.c:54:29: [1] (buffer) equal: Function does not check the second iterator for over-read conditions (CWE-126). This function is often discouraged by most C++ coding standards in favor of its safer alternatives provided since C++14. Consider using a form of this function that checks the second iterator before potentially overflowing it. l_int32 i, n, npages, equal, success; data/leptonlib-1.79.0/prog/mtiff_reg.c:219:31: [1] (buffer) equal: Function does not check the second iterator for over-read conditions (CWE-126). This function is often discouraged by most C++ coding standards in favor of its safer alternatives provided since C++14. Consider using a form of this function that checks the second iterator before potentially overflowing it. pixEqual(pix1, pix2, &equal); data/leptonlib-1.79.0/prog/mtiff_reg.c:220:14: [1] (buffer) equal: Function does not check the second iterator for over-read conditions (CWE-126). This function is often discouraged by most C++ coding standards in favor of its safer alternatives provided since C++14. Consider using a form of this function that checks the second iterator before potentially overflowing it. if (!equal) success = FALSE; data/leptonlib-1.79.0/prog/mtiff_reg.c:338:14: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). length = strlen(str); data/leptonlib-1.79.0/prog/recogsort.c:70:45: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). boxa1 = boxaReadMem((l_uint8 *)boxatxt, strlen(boxatxt)); data/leptonlib-1.79.0/prog/replacebytes.c:79:33: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). strlen(newstr), fileout); data/leptonlib-1.79.0/prog/string_reg.c:73:44: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). (l_uint8 *)str1, strlen(str1)); /* 2 */ data/leptonlib-1.79.0/prog/string_reg.c:80:44: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). (l_uint8 *)str1, strlen(str1)); /* 4 */ data/leptonlib-1.79.0/prog/string_reg.c:86:44: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). (l_uint8 *)str1, strlen(str1)); /* 6 */ data/leptonlib-1.79.0/prog/string_reg.c:127:60: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). l_binaryWrite("/tmp/lept/string/test1.txt", "w", str1, strlen(str1)); data/leptonlib-1.79.0/prog/string_reg.c:128:60: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). l_binaryWrite("/tmp/lept/string/test2.txt", "w", str2, strlen(str2)); data/leptonlib-1.79.0/prog/string_reg.c:129:60: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). l_binaryWrite("/tmp/lept/string/test3.txt", "w", str3, strlen(str3)); data/leptonlib-1.79.0/prog/string_reg.c:130:60: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). l_binaryWrite("/tmp/lept/string/test4.txt", "w", str4, strlen(str4)); data/leptonlib-1.79.0/prog/string_reg.c:131:60: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). l_binaryWrite("/tmp/lept/string/test5.txt", "w", str5, strlen(str5)); data/leptonlib-1.79.0/prog/string_reg.c:132:60: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). l_binaryWrite("/tmp/lept/string/test6.txt", "w", str6, strlen(str6)); data/leptonlib-1.79.0/prog/string_reg.c:175:22: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). strlen(str2), "/tmp/lept/string/junk3.txt"); data/leptonlib-1.79.0/prog/xtractprotos.c:132:23: [1] (buffer) sscanf: It's unclear if the %s limit in the format string is small enough (CWE-120). Check that the limit is sufficiently small, or use a different input function. ret = sscanf(argv[i] + 1, "prestring=%490s", buf); data/leptonlib-1.79.0/prog/xtractprotos.c:137:28: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). if ((len = strlen(buf)) > L_BUFSIZE - 3) { data/leptonlib-1.79.0/prog/xtractprotos.c:146:23: [1] (buffer) sscanf: It's unclear if the %s limit in the format string is small enough (CWE-120). Check that the limit is sufficiently small, or use a different input function. ret = sscanf(argv[i] + 1, "protos=%490s", buf); data/leptonlib-1.79.0/prog/xtractprotos.c:194:15: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). len = strlen(filein); data/leptonlib-1.79.0/prog/xtractprotos.c:209:13: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). if (strlen(str) > 1) { /* strlen(str) == 1 is a file without protos */ data/leptonlib-1.79.0/src/bardecode.c:226:15: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). len = strlen(barstr); data/leptonlib-1.79.0/src/bardecode.c:243:15: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). len = strlen(barstr); data/leptonlib-1.79.0/src/bardecode.c:260:15: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). len = strlen(barstr); data/leptonlib-1.79.0/src/bardecode.c:277:15: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). len = strlen(barstr); data/leptonlib-1.79.0/src/bardecode.c:294:15: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). len = strlen(barstr); data/leptonlib-1.79.0/src/bardecode.c:317:15: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). len = strlen(barstr); data/leptonlib-1.79.0/src/bardecode.c:387:11: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). len = strlen(vbarstr); data/leptonlib-1.79.0/src/bardecode.c:467:11: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). len = strlen(vbarstr); data/leptonlib-1.79.0/src/bardecode.c:566:11: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). len = strlen(vbarstr); data/leptonlib-1.79.0/src/bardecode.c:681:11: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). len = strlen(vbarstr); data/leptonlib-1.79.0/src/bardecode.c:765:11: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). len = strlen(vbarstr); data/leptonlib-1.79.0/src/bardecode.c:848:11: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). len = strlen(barstr); data/leptonlib-1.79.0/src/bardecode.c:968:11: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). len = strlen(barstr); data/leptonlib-1.79.0/src/bmf.c:508:41: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). data = decodeBase64(fontdata_4, strlen(fontdata_4), &nbytes); data/leptonlib-1.79.0/src/bmf.c:510:41: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). data = decodeBase64(fontdata_6, strlen(fontdata_6), &nbytes); data/leptonlib-1.79.0/src/bmf.c:512:41: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). data = decodeBase64(fontdata_8, strlen(fontdata_8), &nbytes); data/leptonlib-1.79.0/src/bmf.c:514:42: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). data = decodeBase64(fontdata_10, strlen(fontdata_10), &nbytes); data/leptonlib-1.79.0/src/bmf.c:516:42: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). data = decodeBase64(fontdata_12, strlen(fontdata_12), &nbytes); data/leptonlib-1.79.0/src/bmf.c:518:42: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). data = decodeBase64(fontdata_14, strlen(fontdata_14), &nbytes); data/leptonlib-1.79.0/src/bmf.c:520:42: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). data = decodeBase64(fontdata_16, strlen(fontdata_16), &nbytes); data/leptonlib-1.79.0/src/bmf.c:522:42: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). data = decodeBase64(fontdata_18, strlen(fontdata_18), &nbytes); data/leptonlib-1.79.0/src/bmf.c:524:42: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). data = decodeBase64(fontdata_20, strlen(fontdata_20), &nbytes); data/leptonlib-1.79.0/src/bootnumgen1.c:302:38: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). data1 = decodeBase64(l_bootnum1, strlen(l_bootnum1), &size1); data/leptonlib-1.79.0/src/bootnumgen2.c:285:38: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). data1 = decodeBase64(l_bootnum2, strlen(l_bootnum2), &size1); data/leptonlib-1.79.0/src/bootnumgen3.c:361:39: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). data1 = decodeBase64(l_strdata_0, strlen(l_strdata_0), &size1); data/leptonlib-1.79.0/src/bootnumgen4.c:810:38: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). data1 = decodeBase64(l_bootnum4, strlen(l_bootnum4), &size1); data/leptonlib-1.79.0/src/boxfunc1.c:2473:28: [1] (buffer) mismatch: Function does not check the second iterator for over-read conditions (CWE-126). This function is often discouraged by most C++ coding standards in favor of its safer alternatives provided since C++14. Consider using a form of this function that checks the second iterator before potentially overflowing it. l_int32 i, n1, n2, match, mismatch; data/leptonlib-1.79.0/src/boxfunc1.c:2511:10: [1] (buffer) mismatch: Function does not check the second iterator for over-read conditions (CWE-126). This function is often discouraged by most C++ coding standards in favor of its safer alternatives provided since C++14. Consider using a form of this function that checks the second iterator before potentially overflowing it. if (!mismatch) *psimilar = 1; data/leptonlib-1.79.0/src/bytearray.c:414:11: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). len = strlen(str); data/leptonlib-1.79.0/src/ccbord.c:2544:42: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). l_binaryWrite(filename, "w", svgstr, strlen(svgstr)); data/leptonlib-1.79.0/src/compare.c:188:37: [1] (buffer) mismatch: Function does not check the second iterator for over-read conditions (CWE-126). This function is often discouraged by most C++ coding standards in favor of its safer alternatives provided since C++14. Consider using a form of this function that checks the second iterator before potentially overflowing it. l_int32 spp1, spp2, i, j, color, mismatch, opaque; data/leptonlib-1.79.0/src/compare.c:221:13: [1] (buffer) mismatch: Function does not check the second iterator for over-read conditions (CWE-126). This function is often discouraged by most C++ coding standards in favor of its safer alternatives provided since C++14. Consider using a form of this function that checks the second iterator before potentially overflowing it. if (mismatch) { data/leptonlib-1.79.0/src/compare.c:312:27: [1] (buffer) mismatch: Function does not check the second iterator for over-read conditions (CWE-126). This function is often discouraged by most C++ coding standards in favor of its safer alternatives provided since C++14. Consider using a form of this function that checks the second iterator before potentially overflowing it. if (use_alpha && !mismatch) data/leptonlib-1.79.0/src/dewarp1.c:1222:5: [1] (buffer) getc: Check buffer boundaries if used in a loop including recursive loops (CWE-120, CWE-20). getc(fp); data/leptonlib-1.79.0/src/fhmtauto.c:399:14: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). nbytes = strlen(filestr); data/leptonlib-1.79.0/src/fhmtauto.c:618:14: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). nbytes = strlen(filestr); data/leptonlib-1.79.0/src/fmorphauto.c:460:14: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). nbytes = strlen(filestr); data/leptonlib-1.79.0/src/fmorphauto.c:657:14: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). nbytes = strlen(filestr); data/leptonlib-1.79.0/src/fpix1.c:1775:5: [1] (buffer) fgetc: Check buffer boundaries if used in a loop including recursive loops (CWE-120, CWE-20). fgetc(fp); /* ending nl */ data/leptonlib-1.79.0/src/fpix1.c:2073:5: [1] (buffer) fgetc: Check buffer boundaries if used in a loop including recursive loops (CWE-120, CWE-20). fgetc(fp); /* ending nl */ data/leptonlib-1.79.0/src/gplot.c:597:23: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). fwrite(cmdstr, 1, strlen(cmdstr), fp); data/leptonlib-1.79.0/src/gplot.c:635:29: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). fwrite(plotdata, 1, strlen(plotdata), fp); data/leptonlib-1.79.0/src/gplot.c:1266:14: [1] (buffer) fscanf: It's unclear if the %s limit in the format string is small enough (CWE-120). Check that the limit is sufficiently small, or use a different input function. ignore = fscanf(fp, "Rootname: %511s\n", buf); /* Bufsize - 1 */ data/leptonlib-1.79.0/src/gplot.c:1271:11: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). title[strlen(title) - 1] = '\0'; data/leptonlib-1.79.0/src/gplot.c:1274:12: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). xlabel[strlen(xlabel) - 1] = '\0'; data/leptonlib-1.79.0/src/gplot.c:1277:12: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). ylabel[strlen(ylabel) - 1] = '\0'; data/leptonlib-1.79.0/src/gplot.c:1294:14: [1] (buffer) fscanf: It's unclear if the %s limit in the format string is small enough (CWE-120). Check that the limit is sufficiently small, or use a different input function. ignore = fscanf(fp, "Commandfile name: %511s\n", buf); /* Bufsize - 1 */ data/leptonlib-1.79.0/src/gplot.c:1308:14: [1] (buffer) fscanf: It's unclear if the %s limit in the format string is small enough (CWE-120). Check that the limit is sufficiently small, or use a different input function. ignore = fscanf(fp, "Output file name: %511s\n", buf); data/leptonlib-1.79.0/src/jp2kio.c:602:23: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). size_t len1 = strlen(comment1); data/leptonlib-1.79.0/src/jp2kio.c:603:23: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). size_t len2 = strlen(comment2); data/leptonlib-1.79.0/src/jp2kio.c:606:24: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). len1 += len2 + strlen(version1) + strlen(version2) + 1; data/leptonlib-1.79.0/src/jp2kio.c:606:43: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). len1 += len2 + strlen(version1) + strlen(version2) + 1; data/leptonlib-1.79.0/src/jpegio.c:925:13: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). if (strlen(text) > 65433) { data/leptonlib-1.79.0/src/jpegio.c:927:30: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). procName, strlen(text)); data/leptonlib-1.79.0/src/jpegio.c:930:67: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). jpeg_write_marker(&cinfo, JPEG_COM, (const JOCTET *)text, strlen(text)); data/leptonlib-1.79.0/src/morphseq.c:205:20: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). nred = strlen(op) - 1; data/leptonlib-1.79.0/src/morphseq.c:373:20: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). nred = strlen(op) - 1; data/leptonlib-1.79.0/src/morphseq.c:522:20: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). nred = strlen(op) - 1; data/leptonlib-1.79.0/src/morphseq.c:671:20: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). nred = strlen(op) - 1; data/leptonlib-1.79.0/src/morphseq.c:785:20: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). nred = strlen(op) - 1; data/leptonlib-1.79.0/src/numabasic.c:325:18: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). if (!str || (strlen(str) == 0)) data/leptonlib-1.79.0/src/parseprotos.c:308:15: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). len = strlen(str); data/leptonlib-1.79.0/src/parseprotos.c:359:15: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). len = strlen(str); data/leptonlib-1.79.0/src/parseprotos.c:590:18: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). nchars = strlen(str); data/leptonlib-1.79.0/src/parseprotos.c:616:11: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). len = strlen(cleanstr); data/leptonlib-1.79.0/src/parseprotos.c:708:18: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). nchars = strlen(str); data/leptonlib-1.79.0/src/parseprotos.c:780:18: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). nchars = strlen(str); data/leptonlib-1.79.0/src/parseprotos.c:855:18: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). nchars = strlen(str); data/leptonlib-1.79.0/src/parseprotos.c:949:18: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). nchars = strlen(str); data/leptonlib-1.79.0/src/pdfio2.c:1683:34: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). l_dnaAddNumber(lpd->objsize, strlen(lpd->id)); data/leptonlib-1.79.0/src/pdfio2.c:1691:34: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). l_dnaAddNumber(lpd->objsize, strlen(lpd->obj1)); data/leptonlib-1.79.0/src/pdfio2.c:1722:34: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). l_dnaAddNumber(lpd->objsize, strlen(lpd->obj2)); data/leptonlib-1.79.0/src/pdfio2.c:1731:34: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). l_dnaAddNumber(lpd->objsize, strlen(lpd->obj3)); data/leptonlib-1.79.0/src/pdfio2.c:1769:13: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). nchar = strlen(str); data/leptonlib-1.79.0/src/pdfio2.c:1866:34: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). l_dnaAddNumber(lpd->objsize, strlen(lpd->obj4)); data/leptonlib-1.79.0/src/pdfio2.c:1911:37: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). (l_int32)strlen(cstr), cstr); data/leptonlib-1.79.0/src/pdfio2.c:1914:34: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). l_dnaAddNumber(lpd->objsize, strlen(lpd->obj5)); data/leptonlib-1.79.0/src/pdfio2.c:2030:23: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). strlen(xstr) + cid->nbytescomp + strlen(lpd->poststream)); data/leptonlib-1.79.0/src/pdfio2.c:2030:56: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). strlen(xstr) + cid->nbytescomp + strlen(lpd->poststream)); data/leptonlib-1.79.0/src/pdfio2.c:2073:38: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). l_dnaAddNumber(lpd->objsize, strlen(cmstr)); data/leptonlib-1.79.0/src/pdfio2.c:2197:29: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). nbytes = lpd->xrefloc + strlen(lpd->trailer); data/leptonlib-1.79.0/src/pdfio2.c:2222:15: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). len = strlen(str); data/leptonlib-1.79.0/src/pdfio2.c:2227:33: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). lpd->poststream, strlen(lpd->poststream)); data/leptonlib-1.79.0/src/pdfio2.c:2233:51: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). memcpy(data + locs[6 + nimages + i], str, strlen(str)); data/leptonlib-1.79.0/src/pdfio2.c:2237:47: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). memcpy(data + lpd->xrefloc, lpd->trailer, strlen(lpd->trailer)); data/leptonlib-1.79.0/src/pixabasic.c:1109:21: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). if (text && strlen(text) > 0) data/leptonlib-1.79.0/src/pixabasic.c:1266:28: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). hastext = (text && strlen(text) > 0); data/leptonlib-1.79.0/src/pixafunc2.c:1248:24: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). if (textstr && strlen(textstr) > 0) { data/leptonlib-1.79.0/src/pixafunc2.c:1353:24: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). if (textstr && strlen(textstr) > 0) { data/leptonlib-1.79.0/src/pixafunc2.c:2111:17: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). if (text && strlen(text) > 4) { data/leptonlib-1.79.0/src/pixcomp.c:1754:9: [1] (buffer) fgetc: Check buffer boundaries if used in a loop including recursive loops (CWE-120, CWE-20). fgetc(fp); /* swallow the ending nl */ data/leptonlib-1.79.0/src/pngio.c:1154:34: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). text_chunk.text_length = strlen(text); data/leptonlib-1.79.0/src/pngio.c:2017:34: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). text_chunk.text_length = strlen(text); data/leptonlib-1.79.0/src/pnmio.c:621:35: [1] (buffer) fgetc: Check buffer boundaries if used in a loop including recursive loops (CWE-120, CWE-20). if ('\n' != (ch = fgetc(fp))) data/leptonlib-1.79.0/src/pnmio.c:1350:18: [1] (buffer) fgetc: Check buffer boundaries if used in a loop including recursive loops (CWE-120, CWE-20). if ((c = fgetc(fp)) == EOF) data/leptonlib-1.79.0/src/pnmio.c:1396:18: [1] (buffer) fgetc: Check buffer boundaries if used in a loop including recursive loops (CWE-120, CWE-20). if ((c = fgetc(fp)) == EOF) data/leptonlib-1.79.0/src/pnmio.c:1449:18: [1] (buffer) fgetc: Check buffer boundaries if used in a loop including recursive loops (CWE-120, CWE-20). if ((c = fgetc(fp)) == EOF) data/leptonlib-1.79.0/src/pnmio.c:1458:26: [1] (buffer) fgetc: Check buffer boundaries if used in a loop including recursive loops (CWE-120, CWE-20). if ((c = fgetc(fp)) == EOF) data/leptonlib-1.79.0/src/pnmio.c:1461:22: [1] (buffer) fgetc: Check buffer boundaries if used in a loop including recursive loops (CWE-120, CWE-20). if ((c = fgetc(fp)) == EOF) data/leptonlib-1.79.0/src/pnmio.c:1472:18: [1] (buffer) fgetc: Check buffer boundaries if used in a loop including recursive loops (CWE-120, CWE-20). if ((c = fgetc(fp)) == EOF) data/leptonlib-1.79.0/src/pnmio.c:1484:18: [1] (buffer) fgetc: Check buffer boundaries if used in a loop including recursive loops (CWE-120, CWE-20). if ((c = fgetc(fp)) == EOF) data/leptonlib-1.79.0/src/pnmio.c:1514:14: [1] (buffer) fgetc: Check buffer boundaries if used in a loop including recursive loops (CWE-120, CWE-20). if ((c = fgetc(fp)) == EOF) data/leptonlib-1.79.0/src/pnmio.c:1519:26: [1] (buffer) fgetc: Check buffer boundaries if used in a loop including recursive loops (CWE-120, CWE-20). if ((c = fgetc(fp)) == EOF) data/leptonlib-1.79.0/src/pnmio.c:1522:22: [1] (buffer) fgetc: Check buffer boundaries if used in a loop including recursive loops (CWE-120, CWE-20). if ((c = fgetc(fp)) == EOF) data/leptonlib-1.79.0/src/psio2.c:265:14: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). length = strlen(outstr); data/leptonlib-1.79.0/src/psio2.c:717:14: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). nbytes = strlen(outstr); data/leptonlib-1.79.0/src/psio2.c:924:16: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). *pnbytes = strlen(outstr); data/leptonlib-1.79.0/src/psio2.c:1114:14: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). nbytes = strlen(outstr); data/leptonlib-1.79.0/src/psio2.c:1313:16: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). *pnbytes = strlen(outstr); data/leptonlib-1.79.0/src/psio2.c:1591:14: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). nbytes = strlen(outstr); data/leptonlib-1.79.0/src/psio2.c:1797:16: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). *pnbytes = strlen(outstr); data/leptonlib-1.79.0/src/psio2.c:1974:14: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). *psize = strlen((char *)(*pdata)); data/leptonlib-1.79.0/src/ptabasic.c:709:9: [1] (buffer) fscanf: It's unclear if the %s limit in the format string is small enough (CWE-120). Check that the limit is sufficiently small, or use a different input function. if (fscanf(fp, " Number of pts = %d; format = %127s\n", &n, typestr) != 2) data/leptonlib-1.79.0/src/readfile.c:1287:28: [1] (buffer) equal: Function does not check the second iterator for over-read conditions (CWE-126). This function is often discouraged by most C++ coding standards in favor of its safer alternatives provided since C++14. Consider using a form of this function that checks the second iterator before potentially overflowing it. l_int32 w, h, d, depth, equal, problems; data/leptonlib-1.79.0/src/readfile.c:1344:31: [1] (buffer) equal: Function does not check the second iterator for over-read conditions (CWE-126). This function is often discouraged by most C++ coding standards in favor of its safer alternatives provided since C++14. Consider using a form of this function that checks the second iterator before potentially overflowing it. pixEqual(pixc, pix2, &equal); data/leptonlib-1.79.0/src/readfile.c:1345:14: [1] (buffer) equal: Function does not check the second iterator for over-read conditions (CWE-126). This function is often discouraged by most C++ coding standards in favor of its safer alternatives provided since C++14. Consider using a form of this function that checks the second iterator before potentially overflowing it. if (!equal) { data/leptonlib-1.79.0/src/readfile.c:1357:31: [1] (buffer) equal: Function does not check the second iterator for over-read conditions (CWE-126). This function is often discouraged by most C++ coding standards in favor of its safer alternatives provided since C++14. Consider using a form of this function that checks the second iterator before potentially overflowing it. pixEqual(pixc, pix1, &equal); data/leptonlib-1.79.0/src/readfile.c:1358:14: [1] (buffer) equal: Function does not check the second iterator for over-read conditions (CWE-126). This function is often discouraged by most C++ coding standards in favor of its safer alternatives provided since C++14. Consider using a form of this function that checks the second iterator before potentially overflowing it. if (!equal) { data/leptonlib-1.79.0/src/readfile.c:1373:31: [1] (buffer) equal: Function does not check the second iterator for over-read conditions (CWE-126). This function is often discouraged by most C++ coding standards in favor of its safer alternatives provided since C++14. Consider using a form of this function that checks the second iterator before potentially overflowing it. pixEqual(pixc, pix1, &equal); data/leptonlib-1.79.0/src/readfile.c:1374:14: [1] (buffer) equal: Function does not check the second iterator for over-read conditions (CWE-126). This function is often discouraged by most C++ coding standards in favor of its safer alternatives provided since C++14. Consider using a form of this function that checks the second iterator before potentially overflowing it. if (!equal) { data/leptonlib-1.79.0/src/readfile.c:1397:27: [1] (buffer) equal: Function does not check the second iterator for over-read conditions (CWE-126). This function is often discouraged by most C++ coding standards in favor of its safer alternatives provided since C++14. Consider using a form of this function that checks the second iterator before potentially overflowing it. pixEqual(pixc, pix1, &equal); data/leptonlib-1.79.0/src/readfile.c:1398:10: [1] (buffer) equal: Function does not check the second iterator for over-read conditions (CWE-126). This function is often discouraged by most C++ coding standards in favor of its safer alternatives provided since C++14. Consider using a form of this function that checks the second iterator before potentially overflowing it. if (!equal) { data/leptonlib-1.79.0/src/readfile.c:1409:27: [1] (buffer) equal: Function does not check the second iterator for over-read conditions (CWE-126). This function is often discouraged by most C++ coding standards in favor of its safer alternatives provided since C++14. Consider using a form of this function that checks the second iterator before potentially overflowing it. pixEqual(pixc, pix1, &equal); data/leptonlib-1.79.0/src/readfile.c:1410:10: [1] (buffer) equal: Function does not check the second iterator for over-read conditions (CWE-126). This function is often discouraged by most C++ coding standards in favor of its safer alternatives provided since C++14. Consider using a form of this function that checks the second iterator before potentially overflowing it. if (!equal) { data/leptonlib-1.79.0/src/readfile.c:1421:27: [1] (buffer) equal: Function does not check the second iterator for over-read conditions (CWE-126). This function is often discouraged by most C++ coding standards in favor of its safer alternatives provided since C++14. Consider using a form of this function that checks the second iterator before potentially overflowing it. pixEqual(pixc, pix1, &equal); data/leptonlib-1.79.0/src/readfile.c:1422:10: [1] (buffer) equal: Function does not check the second iterator for over-read conditions (CWE-126). This function is often discouraged by most C++ coding standards in favor of its safer alternatives provided since C++14. Consider using a form of this function that checks the second iterator before potentially overflowing it. if (!equal) { data/leptonlib-1.79.0/src/readfile.c:1465:31: [1] (buffer) equal: Function does not check the second iterator for over-read conditions (CWE-126). This function is often discouraged by most C++ coding standards in favor of its safer alternatives provided since C++14. Consider using a form of this function that checks the second iterator before potentially overflowing it. pixEqual(pixc, pix1, &equal); data/leptonlib-1.79.0/src/readfile.c:1466:14: [1] (buffer) equal: Function does not check the second iterator for over-read conditions (CWE-126). This function is often discouraged by most C++ coding standards in favor of its safer alternatives provided since C++14. Consider using a form of this function that checks the second iterator before potentially overflowing it. if (!equal) { data/leptonlib-1.79.0/src/readfile.c:1475:31: [1] (buffer) equal: Function does not check the second iterator for over-read conditions (CWE-126). This function is often discouraged by most C++ coding standards in favor of its safer alternatives provided since C++14. Consider using a form of this function that checks the second iterator before potentially overflowing it. pixEqual(pixc, pix1, &equal); data/leptonlib-1.79.0/src/readfile.c:1476:14: [1] (buffer) equal: Function does not check the second iterator for over-read conditions (CWE-126). This function is often discouraged by most C++ coding standards in favor of its safer alternatives provided since C++14. Consider using a form of this function that checks the second iterator before potentially overflowing it. if (!equal) { data/leptonlib-1.79.0/src/readfile.c:1485:31: [1] (buffer) equal: Function does not check the second iterator for over-read conditions (CWE-126). This function is often discouraged by most C++ coding standards in favor of its safer alternatives provided since C++14. Consider using a form of this function that checks the second iterator before potentially overflowing it. pixEqual(pixc, pix1, &equal); data/leptonlib-1.79.0/src/readfile.c:1486:14: [1] (buffer) equal: Function does not check the second iterator for over-read conditions (CWE-126). This function is often discouraged by most C++ coding standards in favor of its safer alternatives provided since C++14. Consider using a form of this function that checks the second iterator before potentially overflowing it. if (!equal) { data/leptonlib-1.79.0/src/readfile.c:1495:31: [1] (buffer) equal: Function does not check the second iterator for over-read conditions (CWE-126). This function is often discouraged by most C++ coding standards in favor of its safer alternatives provided since C++14. Consider using a form of this function that checks the second iterator before potentially overflowing it. pixEqual(pixc, pix1, &equal); data/leptonlib-1.79.0/src/readfile.c:1496:14: [1] (buffer) equal: Function does not check the second iterator for over-read conditions (CWE-126). This function is often discouraged by most C++ coding standards in favor of its safer alternatives provided since C++14. Consider using a form of this function that checks the second iterator before potentially overflowing it. if (!equal) { data/leptonlib-1.79.0/src/readfile.c:1518:27: [1] (buffer) equal: Function does not check the second iterator for over-read conditions (CWE-126). This function is often discouraged by most C++ coding standards in favor of its safer alternatives provided since C++14. Consider using a form of this function that checks the second iterator before potentially overflowing it. pixEqual(pix1, pix2, &equal); data/leptonlib-1.79.0/src/readfile.c:1519:10: [1] (buffer) equal: Function does not check the second iterator for over-read conditions (CWE-126). This function is often discouraged by most C++ coding standards in favor of its safer alternatives provided since C++14. Consider using a form of this function that checks the second iterator before potentially overflowing it. if (!equal) { data/leptonlib-1.79.0/src/readfile.c:1536:27: [1] (buffer) equal: Function does not check the second iterator for over-read conditions (CWE-126). This function is often discouraged by most C++ coding standards in favor of its safer alternatives provided since C++14. Consider using a form of this function that checks the second iterator before potentially overflowing it. pixEqual(pix1, pix2, &equal); data/leptonlib-1.79.0/src/readfile.c:1537:10: [1] (buffer) equal: Function does not check the second iterator for over-read conditions (CWE-126). This function is often discouraged by most C++ coding standards in favor of its safer alternatives provided since C++14. Consider using a form of this function that checks the second iterator before potentially overflowing it. if (!equal) { data/leptonlib-1.79.0/src/recogbasic.c:367:22: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). if (!text || strlen(text) == 0) { data/leptonlib-1.79.0/src/recogbasic.c:796:12: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). size = strlen(str); data/leptonlib-1.79.0/src/recogident.c:1808:15: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). len = strlen(textstr) + 1; data/leptonlib-1.79.0/src/regutils.c:861:16: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). if ((len = strlen(root)) <= 4) { data/leptonlib-1.79.0/src/regutils.c:874:19: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). len = strlen(root); data/leptonlib-1.79.0/src/sarray1.c:241:12: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). size = strlen(string); data/leptonlib-1.79.0/src/sarray1.c:292:12: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). size = strlen(string); data/leptonlib-1.79.0/src/sarray1.c:842:17: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). size += strlen(str) + 2; data/leptonlib-1.79.0/src/sarray1.c:851:15: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). len = strlen(src); data/leptonlib-1.79.0/src/sarray1.c:1056:15: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). len = strlen(wd); data/leptonlib-1.79.0/src/sarray1.c:1172:43: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). arrayFindSequence((l_uint8 *)str, strlen(str), (l_uint8 *)substr, data/leptonlib-1.79.0/src/sarray1.c:1173:27: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). strlen(substr), &offset, &found); data/leptonlib-1.79.0/src/sarray1.c:1295:43: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). arrayFindSequence((l_uint8 *)str, strlen(str), (l_uint8 *)substr, data/leptonlib-1.79.0/src/sarray1.c:1296:27: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). strlen(substr), &offset, &found); data/leptonlib-1.79.0/src/sarray1.c:1311:43: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). arrayFindSequence((l_uint8 *)str, strlen(str), (l_uint8 *)substr, data/leptonlib-1.79.0/src/sarray1.c:1312:27: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). strlen(substr), &offset, &found); data/leptonlib-1.79.0/src/sarray1.c:1328:43: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). arrayFindSequence((l_uint8 *)str, strlen(str), (l_uint8 *)substr, data/leptonlib-1.79.0/src/sarray1.c:1329:27: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). strlen(substr), &offset, &found); data/leptonlib-1.79.0/src/sarray1.c:1538:15: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). len = strlen(sa->array[i]); data/leptonlib-1.79.0/src/sarray1.c:1899:16: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). size = strlen(realdir) + strlen(pdirentry->d_name) + 2; data/leptonlib-1.79.0/src/sarray1.c:1899:34: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). size = strlen(realdir) + strlen(pdirentry->d_name) + 2; data/leptonlib-1.79.0/src/sarray1.c:1941:9: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). if (strlen(pszDir) + 1 > MAX_PATH) { data/leptonlib-1.79.0/src/sarray2.c:201:12: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). len1 = strlen(str1); data/leptonlib-1.79.0/src/sarray2.c:202:12: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). len2 = strlen(str2); data/leptonlib-1.79.0/src/sel1.c:1083:11: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). len = strlen(str); data/leptonlib-1.79.0/src/sel1.c:1439:5: [1] (buffer) sscanf: It's unclear if the %s limit in the format string is small enough (CWE-120). Check that the limit is sufficiently small, or use a different input function. sscanf(linebuf, " ------ %200s ------", selname); data/leptonlib-1.79.0/src/sel1.c:1643:9: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). if (strlen(text) != (size_t)w * h) data/leptonlib-1.79.0/src/sel1.c:1913:11: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). len = strlen(line); data/leptonlib-1.79.0/src/stringcode.c:389:11: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). descr[strlen(descr) - 1] = '\0'; data/leptonlib-1.79.0/src/stringcode.c:432:13: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). casestr[strlen(casestr) - 1] = '\0'; data/leptonlib-1.79.0/src/stringcode.c:441:14: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). nbytes = strlen(filestr); data/leptonlib-1.79.0/src/stringcode.c:490:13: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). datastr[strlen(datastr) - 1] = '\0'; data/leptonlib-1.79.0/src/stringcode.c:499:14: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). nbytes = strlen(filestr); data/leptonlib-1.79.0/src/textops.c:601:13: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). nchar = strlen(textstr); data/leptonlib-1.79.0/src/textops.c:915:19: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). len = strlen(linestr); data/leptonlib-1.79.0/src/textops.c:1004:13: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). nchar = strlen(textstr); data/leptonlib-1.79.0/src/textops.c:1094:11: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). len = strlen(textstr); data/leptonlib-1.79.0/src/utils2.c:232:11: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). len = strlen(src); data/leptonlib-1.79.0/src/utils2.c:313:11: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). len = strlen(src); data/leptonlib-1.79.0/src/utils2.c:479:11: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). len = strlen(first); data/leptonlib-1.79.0/src/utils2.c:481:16: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). len += strlen(arg); data/leptonlib-1.79.0/src/utils2.c:523:24: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). srclen1 = (src1) ? strlen(src1) : 0; data/leptonlib-1.79.0/src/utils2.c:524:24: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). srclen2 = (src2) ? strlen(src2) : 0; data/leptonlib-1.79.0/src/utils2.c:603:11: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). len = strlen(src); data/leptonlib-1.79.0/src/utils2.c:799:9: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). n = strlen(src); data/leptonlib-1.79.0/src/utils2.c:833:37: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). if ((dest = (char *)LEPT_CALLOC(strlen(src) + 1, sizeof(char))) == NULL) data/leptonlib-1.79.0/src/utils2.c:835:12: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). nsrc = strlen(src); data/leptonlib-1.79.0/src/utils2.c:889:9: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). if (strlen(sub2) > 0) { data/leptonlib-1.79.0/src/utils2.c:891:54: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). (const l_uint8 *)src, strlen(src), data/leptonlib-1.79.0/src/utils2.c:892:55: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). (const l_uint8 *)sub1, strlen(sub1), data/leptonlib-1.79.0/src/utils2.c:893:55: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). (const l_uint8 *)sub2, strlen(sub2), data/leptonlib-1.79.0/src/utils2.c:897:54: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). (const l_uint8 *)src, strlen(src), data/leptonlib-1.79.0/src/utils2.c:898:55: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). (const l_uint8 *)sub1, strlen(sub1), data/leptonlib-1.79.0/src/utils2.c:959:12: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). nsrc = strlen(src); data/leptonlib-1.79.0/src/utils2.c:960:13: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). nsub1 = strlen(sub1); data/leptonlib-1.79.0/src/utils2.c:961:13: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). nsub2 = strlen(sub2); data/leptonlib-1.79.0/src/utils2.c:1001:56: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). return arrayFindEachSequence((const l_uint8 *)src, strlen(src), data/leptonlib-1.79.0/src/utils2.c:1002:56: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). (const l_uint8 *)sub, strlen(sub)); data/leptonlib-1.79.0/src/utils2.c:1035:9: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). if (strlen(sub) == 0) data/leptonlib-1.79.0/src/utils2.c:1037:9: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). if (strlen(src) == 0) data/leptonlib-1.79.0/src/utils2.c:2127:10: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). if ((strlen(subdir) == 0) || (subdir[0] == '.') || (subdir[0] == '/')) data/leptonlib-1.79.0/src/utils2.c:2197:10: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). if ((strlen(subdir) == 0) || (subdir[0] == '.') || (subdir[0] == '/')) data/leptonlib-1.79.0/src/utils2.c:2375:18: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). if (!tail || strlen(tail) == 0) data/leptonlib-1.79.0/src/utils2.c:2412:22: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). if (!filepath || strlen(filepath) == 0) data/leptonlib-1.79.0/src/utils2.c:2876:16: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). if (dir && strlen(dir) >= 2 && dir[0] == '.' && dir[1] == '.') data/leptonlib-1.79.0/src/utils2.c:2878:18: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). if (fname && strlen(fname) >= 2 && fname[0] == '.' && fname[1] == '.') data/leptonlib-1.79.0/src/utils2.c:2886:16: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). if (dir && strlen(dir) > 0) { data/leptonlib-1.79.0/src/utils2.c:2899:23: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). emptydir = dir && strlen(dir) == 0; data/leptonlib-1.79.0/src/utils2.c:2900:40: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). if ((!dir || emptydir) && fname && strlen(fname) > 0 && fname[0] == '/') data/leptonlib-1.79.0/src/utils2.c:2904:18: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). if (fname && strlen(fname) > 0) { data/leptonlib-1.79.0/src/utils2.c:2953:12: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). len1 = strlen(basedir); data/leptonlib-1.79.0/src/utils2.c:2954:12: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). len2 = strlen(subdirs); data/leptonlib-1.79.0/src/utils2.c:2965:12: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). len4 = strlen(newdir); data/leptonlib-1.79.0/src/utils2.c:3005:11: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). len = strlen(path); data/leptonlib-1.79.0/src/utils2.c:3080:14: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). dirlen = strlen(cdir); data/leptonlib-1.79.0/src/utils2.c:3086:25: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). namelen = (fname) ? strlen(fname) : 0; data/leptonlib-1.79.0/src/utils2.c:3110:21: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). tmpdirlen = strlen(tmpdir); data/leptonlib-1.79.0/src/utils2.c:3114:21: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). tmpdirlen = strlen(tmpdir); data/leptonlib-1.79.0/src/utils2.c:3124:18: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). if (fname && strlen(fname) > 0) { data/leptonlib-1.79.0/src/utils2.c:3125:18: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). dirlen = strlen(pathout); data/leptonlib-1.79.0/src/utils2.c:3202:15: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). pathlen = strlen(path); data/leptonlib-1.79.0/src/utils2.c:3244:11: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). len = strlen(path); data/leptonlib-1.79.0/src/utils2.c:3352:11: [1] (buffer) strlen: Does not handle strings that are not \0-terminated; if given one it may perform an over-read (it could cause a crash if unprotected) (CWE-126). len = strlen(basename); ANALYSIS SUMMARY: Hits = 935 Lines analyzed = 318694 in approximately 10.67 seconds (29864 lines/second) Physical Source Lines of Code (SLOC) = 194624 Hits@level = [0] 2207 [1] 268 [2] 564 [3] 22 [4] 81 [5] 0 Hits@level+ = [0+] 3142 [1+] 935 [2+] 667 [3+] 103 [4+] 81 [5+] 0 Hits/KSLOC@level+ = [0+] 16.1439 [1+] 4.80414 [2+] 3.42712 [3+] 0.529226 [4+] 0.416187 [5+] 0 Dot directories skipped = 1 (--followdotdir overrides) Minimum risk level = 1 Not every hit is necessarily a security vulnerability. There may be other security vulnerabilities; review your code! See 'Secure Programming HOWTO' (https://dwheeler.com/secure-programs) for more information.