Flawfinder version 2.0.10, (C) 2001-2019 David A. Wheeler.
Number of rules (primarily dangerous function names) in C/C++ ruleset: 223
Examining data/miniupnpc-2.1/igd_desc_parse.c
Examining data/miniupnpc-2.1/igd_desc_parse.h
Examining data/miniupnpc-2.1/miniwget.c
Examining data/miniupnpc-2.1/miniwget.h
Examining data/miniupnpc-2.1/minixml.c
Examining data/miniupnpc-2.1/minixml.h
Examining data/miniupnpc-2.1/upnpc.c
Examining data/miniupnpc-2.1/testminixml.c
Examining data/miniupnpc-2.1/minisoap.c
Examining data/miniupnpc-2.1/minisoap.h
Examining data/miniupnpc-2.1/miniupnpc.c
Examining data/miniupnpc-2.1/miniupnpc.h
Examining data/miniupnpc-2.1/upnpcommands.c
Examining data/miniupnpc-2.1/upnpreplyparse.c
Examining data/miniupnpc-2.1/upnpreplyparse.h
Examining data/miniupnpc-2.1/upnpcommands.h
Examining data/miniupnpc-2.1/minixmlvalid.c
Examining data/miniupnpc-2.1/miniupnpc_declspec.h
Examining data/miniupnpc-2.1/testupnpreplyparse.c
Examining data/miniupnpc-2.1/miniupnpcmodule.c
Examining data/miniupnpc-2.1/minissdpc.h
Examining data/miniupnpc-2.1/minissdpc.c
Examining data/miniupnpc-2.1/upnperrors.h
Examining data/miniupnpc-2.1/upnperrors.c
Examining data/miniupnpc-2.1/testigddescparse.c
Examining data/miniupnpc-2.1/codelength.h
Examining data/miniupnpc-2.1/testminiwget.c
Examining data/miniupnpc-2.1/wingenminiupnpcstrings.c
Examining data/miniupnpc-2.1/connecthostport.c
Examining data/miniupnpc-2.1/connecthostport.h
Examining data/miniupnpc-2.1/portlistingparse.c
Examining data/miniupnpc-2.1/portlistingparse.h
Examining data/miniupnpc-2.1/miniupnpctypes.h
Examining data/miniupnpc-2.1/receivedata.c
Examining data/miniupnpc-2.1/receivedata.h
Examining data/miniupnpc-2.1/minihttptestserver.c
Examining data/miniupnpc-2.1/listdevices.c
Examining data/miniupnpc-2.1/testportlistingparse.c
Examining data/miniupnpc-2.1/upnpdev.c
Examining data/miniupnpc-2.1/upnpdev.h
Examining data/miniupnpc-2.1/miniupnpc_socketdef.h
Examining data/miniupnpc-2.1/miniwget_private.h
FINAL RESULTS:
data/miniupnpc-2.1/connecthostport.c:22:9: [4] (format) snprintf:
If format strings can be influenced by an attacker, they can be exploited,
and note that sprintf variations do not always \0-terminate (CWE-134). Use
a constant for the format specification.
#define snprintf _snprintf
data/miniupnpc-2.1/connecthostport.c:22:18: [4] (format) _snprintf:
If format strings can be influenced by an attacker, they can be exploited,
and note that sprintf variations do not always \0-terminate (CWE-134). Use
a constant for the format specification.
#define snprintf _snprintf
data/miniupnpc-2.1/minisoap.c:16:9: [4] (format) snprintf:
If format strings can be influenced by an attacker, they can be exploited,
and note that sprintf variations do not always \0-terminate (CWE-134). Use
a constant for the format specification.
#define snprintf _snprintf
data/miniupnpc-2.1/minisoap.c:16:18: [4] (format) _snprintf:
If format strings can be influenced by an attacker, they can be exploited,
and note that sprintf variations do not always \0-terminate (CWE-134). Use
a constant for the format specification.
#define snprintf _snprintf
data/miniupnpc-2.1/minissdpc.c:23:9: [4] (format) snprintf:
If format strings can be influenced by an attacker, they can be exploited,
and note that sprintf variations do not always \0-terminate (CWE-134). Use
a constant for the format specification.
#define snprintf _snprintf
data/miniupnpc-2.1/minissdpc.c:23:18: [4] (format) _snprintf:
If format strings can be influenced by an attacker, they can be exploited,
and note that sprintf variations do not always \0-terminate (CWE-134). Use
a constant for the format specification.
#define snprintf _snprintf
data/miniupnpc-2.1/minissdpc.c:719:7: [4] (format) snprintf:
If format strings can be influenced by an attacker, they can be exploited,
and note that sprintf variations do not always \0-terminate (CWE-134). Use
a constant for the format specification.
n = snprintf(bufr, sizeof(bufr),
data/miniupnpc-2.1/miniupnpc.c:18:9: [4] (format) snprintf:
If format strings can be influenced by an attacker, they can be exploited,
and note that sprintf variations do not always \0-terminate (CWE-134). Use
a constant for the format specification.
#define snprintf _snprintf
data/miniupnpc-2.1/miniupnpc.c:18:18: [4] (format) _snprintf:
If format strings can be influenced by an attacker, they can be exploited,
and note that sprintf variations do not always \0-terminate (CWE-134). Use
a constant for the format specification.
#define snprintf _snprintf
data/miniupnpc-2.1/miniwget.c:18:9: [4] (format) snprintf:
If format strings can be influenced by an attacker, they can be exploited,
and note that sprintf variations do not always \0-terminate (CWE-134). Use
a constant for the format specification.
#define snprintf _snprintf
data/miniupnpc-2.1/miniwget.c:18:18: [4] (format) _snprintf:
If format strings can be influenced by an attacker, they can be exploited,
and note that sprintf variations do not always \0-terminate (CWE-134). Use
a constant for the format specification.
#define snprintf _snprintf
data/miniupnpc-2.1/upnpc.c:14:9: [4] (format) snprintf:
If format strings can be influenced by an attacker, they can be exploited,
and note that sprintf variations do not always \0-terminate (CWE-134). Use
a constant for the format specification.
#define snprintf _snprintf
data/miniupnpc-2.1/upnpc.c:14:18: [4] (format) _snprintf:
If format strings can be influenced by an attacker, they can be exploited,
and note that sprintf variations do not always \0-terminate (CWE-134). Use
a constant for the format specification.
#define snprintf _snprintf
data/miniupnpc-2.1/wingenminiupnpcstrings.c:71:5: [4] (buffer) sprintf:
Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or
vsnprintf.
sprintf(buffer, "#define MINIUPNPC_VERSION_STRING \"%s\"\n",
data/miniupnpc-2.1/minihttptestserver.c:520:2: [3] (random) srand:
This function is not sufficiently random for security-related functions
such as key and nonce creation (CWE-327). Use a more secure technique for
acquiring random values.
srand(time(NULL));
data/miniupnpc-2.1/connecthostport.c:73:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char tmp_host[MAXHOSTNAMELEN+1];
data/miniupnpc-2.1/connecthostport.c:74:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char port_str[8];
data/miniupnpc-2.1/igd_desc_parse.c:20:2: [2] (buffer) memcpy:
Does not check for buffer overflows when copying to destination (CWE-120).
Make sure destination can always hold the source data.
memcpy(datas->cureltname, name, l);
data/miniupnpc-2.1/igd_desc_parse.c:45:4: [2] (buffer) memcpy:
Does not check for buffer overflows when copying to destination (CWE-120).
Make sure destination can always hold the source data.
memcpy(&datas->CIF, &datas->tmp, sizeof(struct IGDdatas_service));
data/miniupnpc-2.1/igd_desc_parse.c:48:4: [2] (buffer) memcpy:
Does not check for buffer overflows when copying to destination (CWE-120).
Make sure destination can always hold the source data.
memcpy(&datas->IPv6FC, &datas->tmp, sizeof(struct IGDdatas_service));
data/miniupnpc-2.1/igd_desc_parse.c:54:5: [2] (buffer) memcpy:
Does not check for buffer overflows when copying to destination (CWE-120).
Make sure destination can always hold the source data.
memcpy(&datas->first, &datas->tmp, sizeof(struct IGDdatas_service));
data/miniupnpc-2.1/igd_desc_parse.c:56:5: [2] (buffer) memcpy:
Does not check for buffer overflows when copying to destination (CWE-120).
Make sure destination can always hold the source data.
memcpy(&datas->second, &datas->tmp, sizeof(struct IGDdatas_service));
data/miniupnpc-2.1/igd_desc_parse.c:88:3: [2] (buffer) memcpy:
Does not check for buffer overflows when copying to destination (CWE-120).
Make sure destination can always hold the source data.
memcpy(dstmember, data, l);
data/miniupnpc-2.1/igd_desc_parse.h:16:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char controlurl[MINIUPNPC_URL_MAXSIZE];
data/miniupnpc-2.1/igd_desc_parse.h:17:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char eventsuburl[MINIUPNPC_URL_MAXSIZE];
data/miniupnpc-2.1/igd_desc_parse.h:18:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char scpdurl[MINIUPNPC_URL_MAXSIZE];
data/miniupnpc-2.1/igd_desc_parse.h:19:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char servicetype[MINIUPNPC_URL_MAXSIZE];
data/miniupnpc-2.1/igd_desc_parse.h:24:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char cureltname[MINIUPNPC_URL_MAXSIZE];
data/miniupnpc-2.1/igd_desc_parse.h:25:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char urlbase[MINIUPNPC_URL_MAXSIZE];
data/miniupnpc-2.1/igd_desc_parse.h:26:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char presentationurl[MINIUPNPC_URL_MAXSIZE];
data/miniupnpc-2.1/listdevices.c:125:25: [2] (integer) atoi:
Unless checked, the resulting number can exceed the expected range
(CWE-190). If source untrusted, check both minimum and maximum, even if the
input had no minus sign (large numbers can roll over into negative number;
consider saving to an unsigned value if that is intended).
ttl = (unsigned char)atoi(argv[i]);
data/miniupnpc-2.1/minihttptestserver.c:57:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char line_buffer[80];
data/miniupnpc-2.1/minihttptestserver.c:70:4: [2] (buffer) memcpy:
Does not check for buffer overflows when copying to destination (CWE-120).
Make sure destination can always hold the source data.
memcpy(p, line_buffer, 64);
data/miniupnpc-2.1/minihttptestserver.c:74:4: [2] (buffer) memcpy:
Does not check for buffer overflows when copying to destination (CWE-120).
Make sure destination can always hold the source data.
memcpy(p, line_buffer, n);
data/miniupnpc-2.1/minihttptestserver.c:93:3: [2] (buffer) memcpy:
Does not check for buffer overflows when copying to destination (CWE-120).
Make sure destination can always hold the source data.
memcpy(p, crap, i);
data/miniupnpc-2.1/minihttptestserver.c:141:3: [2] (buffer) memcpy:
Does not check for buffer overflows when copying to destination (CWE-120).
Make sure destination can always hold the source data.
memcpy(response_buffer + *response_len, content_buffer + i, n);
data/miniupnpc-2.1/minihttptestserver.c:149:2: [2] (buffer) memcpy:
Does not check for buffer overflows when copying to destination (CWE-120).
Make sure destination can always hold the source data.
memcpy(response_buffer + *response_len, "0\r\n\r\n", 5);
data/miniupnpc-2.1/minihttptestserver.c:308:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char request_buffer[2048];
data/miniupnpc-2.1/minihttptestserver.c:313:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char request_method[16];
data/miniupnpc-2.1/minihttptestserver.c:314:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char request_uri[256];
data/miniupnpc-2.1/minihttptestserver.c:315:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char http_version[16];
data/miniupnpc-2.1/minihttptestserver.c:509:29: [2] (integer) atoi:
Unless checked, the resulting number can exceed the expected range
(CWE-190). If source untrusted, check both minimum and maximum, even if the
input had no minus sign (large numbers can roll over into negative number;
consider saving to an unsigned value if that is intended).
port = (unsigned short)atoi(argv[i]);
data/miniupnpc-2.1/minihttptestserver.c:603:7: [2] (misc) fopen:
Check when opening files - can an attacker redirect it (via symlinks),
force the opening of special file type (e.g., device files), move things
around to create a race condition, control its ancestors, or change its
contents? (CWE-362).
f = fopen(expected_file_name, "wb");
data/miniupnpc-2.1/minisoap.c:51:2: [2] (buffer) memcpy:
Does not check for buffer overflows when copying to destination (CWE-120).
Make sure destination can always hold the source data.
memcpy(p, headers, headerssize);
data/miniupnpc-2.1/minisoap.c:52:2: [2] (buffer) memcpy:
Does not check for buffer overflows when copying to destination (CWE-120).
Make sure destination can always hold the source data.
memcpy(p+headerssize, body, bodysize);
data/miniupnpc-2.1/minisoap.c:83:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char headerbuf[512];
data/miniupnpc-2.1/minisoap.c:85:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char portstr[8];
data/miniupnpc-2.1/minissdpc.c:47:3: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char sun_path[UNIX_PATH_LEN];
data/miniupnpc-2.1/minissdpc.c:146:3: [2] (buffer) memcpy:
Does not check for buffer overflows when copying to destination (CWE-120).
Make sure destination can always hold the source data.
memcpy(p, buffer + bufferindex, lcopy); \
data/miniupnpc-2.1/minissdpc.c:223:11: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
unsigned char buffer[256];
data/miniupnpc-2.1/minissdpc.c:247:2: [2] (buffer) memcpy:
Does not check for buffer overflows when copying to destination (CWE-120).
Make sure destination can always hold the source data.
memcpy(p, devtype, stsize);
data/miniupnpc-2.1/minissdpc.c:263:11: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
unsigned char buffer[256];
data/miniupnpc-2.1/minissdpc.c:344:3: [2] (buffer) memcpy:
Does not check for buffer overflows when copying to destination (CWE-120).
Make sure destination can always hold the source data.
memcpy(tmp->buffer, url, urlsize);
data/miniupnpc-2.1/minissdpc.c:346:3: [2] (buffer) memcpy:
Does not check for buffer overflows when copying to destination (CWE-120).
Make sure destination can always hold the source data.
memcpy(tmp->st, st, stsize);
data/miniupnpc-2.1/minissdpc.c:485:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char bufr[1536]; /* reception and emission buffer */
data/miniupnpc-2.1/minissdpc.c:786:5: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char hbuf[NI_MAXHOST], sbuf[NI_MAXSERV];
data/miniupnpc-2.1/minissdpc.c:862:6: [2] (buffer) memcpy:
Does not check for buffer overflows when copying to destination (CWE-120).
Make sure destination can always hold the source data.
memcpy(tmp->buffer, descURL, urlsize);
data/miniupnpc-2.1/minissdpc.c:864:6: [2] (buffer) memcpy:
Does not check for buffer overflows when copying to destination (CWE-120).
Make sure destination can always hold the source data.
memcpy(tmp->st, st, stsize);
data/miniupnpc-2.1/minissdpc.c:867:7: [2] (buffer) memcpy:
Does not check for buffer overflows when copying to destination (CWE-120).
Make sure destination can always hold the source data.
memcpy(tmp->usn, usn, usnsize);
data/miniupnpc-2.1/miniupnpc.c:88:11: [2] (integer) atoi:
Unless checked, the resulting number can exceed the expected range
(CWE-190). If source untrusted, check both minimum and maximum, even if the
input had no minus sign (large numbers can roll over into negative number;
consider saving to an unsigned value if that is intended).
int i = atoi(addr + 4);
data/miniupnpc-2.1/miniupnpc.c:123:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char hostname[MAXHOSTNAMELEN+1];
data/miniupnpc-2.1/miniupnpc.c:126:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char soapact[128];
data/miniupnpc-2.1/miniupnpc.c:127:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char soapbody[2048];
data/miniupnpc-2.1/miniupnpc.c:424:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char ifname[IF_NAMESIZE];
data/miniupnpc-2.1/miniupnpc.c:426:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char scope_str[8];
data/miniupnpc-2.1/miniupnpc.c:459:2: [2] (buffer) memcpy:
Does not check for buffer overflows when copying to destination (CWE-120).
Make sure destination can always hold the source data.
memcpy(s, base, n);
data/miniupnpc-2.1/miniupnpc.c:469:5: [2] (buffer) memcpy:
Does not check for buffer overflows when copying to destination (CWE-120).
Make sure destination can always hold the source data.
memcpy(p, "%25", 3);
data/miniupnpc-2.1/miniupnpc.c:470:5: [2] (buffer) memcpy:
Does not check for buffer overflows when copying to destination (CWE-120).
Make sure destination can always hold the source data.
memcpy(p + 3, ifname, strlen(ifname));
data/miniupnpc-2.1/miniupnpc.c:474:5: [2] (buffer) memcpy:
Does not check for buffer overflows when copying to destination (CWE-120).
Make sure destination can always hold the source data.
memcpy(p, "%25", 3);
data/miniupnpc-2.1/miniupnpc.c:475:5: [2] (buffer) memcpy:
Does not check for buffer overflows when copying to destination (CWE-120).
Make sure destination can always hold the source data.
memcpy(p + 3, scope_str, strlen(scope_str));
data/miniupnpc-2.1/miniupnpc.c:483:2: [2] (buffer) memcpy:
Does not check for buffer overflows when copying to destination (CWE-120).
Make sure destination can always hold the source data.
memcpy(s + n, url, l - n);
data/miniupnpc-2.1/miniupnpc.c:534:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char status[64];
data/miniupnpc-2.1/miniupnpc.c:577:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char extIpAddr[16];
data/miniupnpc-2.1/miniupnpc.c:578:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char myLanAddr[40];
data/miniupnpc-2.1/miniupnpc.c:664:9: [2] (buffer) memcpy:
Does not check for buffer overflows when copying to destination (CWE-120).
Make sure destination can always hold the source data.
memcpy(&data->tmp, &data->first, sizeof(struct IGDdatas_service));
data/miniupnpc-2.1/miniupnpc.c:665:9: [2] (buffer) memcpy:
Does not check for buffer overflows when copying to destination (CWE-120).
Make sure destination can always hold the source data.
memcpy(&data->first, &data->second, sizeof(struct IGDdatas_service));
data/miniupnpc-2.1/miniupnpc.c:666:9: [2] (buffer) memcpy:
Does not check for buffer overflows when copying to destination (CWE-120).
Make sure destination can always hold the source data.
memcpy(&data->second, &data->tmp, sizeof(struct IGDdatas_service));
data/miniupnpc-2.1/miniupnpcmodule.c:50:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char lanaddr[40]; /* our ip address on the LAN */
data/miniupnpc-2.1/miniupnpcmodule.c:231:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char status[64];
data/miniupnpc-2.1/miniupnpcmodule.c:232:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char lastconnerror[64];
data/miniupnpc-2.1/miniupnpcmodule.c:257:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char connectionType[64];
data/miniupnpc-2.1/miniupnpcmodule.c:277:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char externalIPAddress[40];
data/miniupnpc-2.1/miniupnpcmodule.c:300:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char extPort[6];
data/miniupnpc-2.1/miniupnpcmodule.c:302:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char inPort[6];
data/miniupnpc-2.1/miniupnpcmodule.c:314:2: [2] (buffer) sprintf:
Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or
vsnprintf. Risk is low because the source has a constant maximum length.
sprintf(extPort, "%hu", ePort);
data/miniupnpc-2.1/miniupnpcmodule.c:315:2: [2] (buffer) sprintf:
Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or
vsnprintf. Risk is low because the source has a constant maximum length.
sprintf(inPort, "%hu", iPort);
data/miniupnpc-2.1/miniupnpcmodule.c:341:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char extPort[6];
data/miniupnpc-2.1/miniupnpcmodule.c:343:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char inPort[6];
data/miniupnpc-2.1/miniupnpcmodule.c:345:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char reservedPort[6];
data/miniupnpc-2.1/miniupnpcmodule.c:355:2: [2] (buffer) sprintf:
Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or
vsnprintf. Risk is low because the source has a constant maximum length.
sprintf(extPort, "%hu", ePort);
data/miniupnpc-2.1/miniupnpcmodule.c:356:2: [2] (buffer) sprintf:
Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or
vsnprintf. Risk is low because the source has a constant maximum length.
sprintf(inPort, "%hu", iPort);
data/miniupnpc-2.1/miniupnpcmodule.c:362:29: [2] (integer) atoi:
Unless checked, the resulting number can exceed the expected range
(CWE-190). If source untrusted, check both minimum and maximum, even if the
input had no minus sign (large numbers can roll over into negative number;
consider saving to an unsigned value if that is intended).
return Py_BuildValue("i", atoi(reservedPort));
data/miniupnpc-2.1/miniupnpcmodule.c:376:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char extPort[6];
data/miniupnpc-2.1/miniupnpcmodule.c:384:2: [2] (buffer) sprintf:
Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or
vsnprintf. Risk is low because the source has a constant maximum length.
sprintf(extPort, "%hu", ePort);
data/miniupnpc-2.1/miniupnpcmodule.c:402:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char extPortStart[6];
data/miniupnpc-2.1/miniupnpcmodule.c:404:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char extPortEnd[6];
data/miniupnpc-2.1/miniupnpcmodule.c:408:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char manageStr[6];
data/miniupnpc-2.1/miniupnpcmodule.c:413:2: [2] (buffer) sprintf:
Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or
vsnprintf. Risk is low because the source has a constant maximum length.
sprintf(extPortStart, "%hu", ePortStart);
data/miniupnpc-2.1/miniupnpcmodule.c:414:2: [2] (buffer) sprintf:
Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or
vsnprintf. Risk is low because the source has a constant maximum length.
sprintf(extPortEnd, "%hu", ePortEnd);
data/miniupnpc-2.1/miniupnpcmodule.c:415:2: [2] (buffer) sprintf:
Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or
vsnprintf. Risk is low because the source has a constant maximum length.
sprintf(manageStr, "%hu", (unsigned short)manage);
data/miniupnpc-2.1/miniupnpcmodule.c:456:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char extPort[6];
data/miniupnpc-2.1/miniupnpcmodule.c:460:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char intClient[40];
data/miniupnpc-2.1/miniupnpcmodule.c:461:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char intPort[6];
data/miniupnpc-2.1/miniupnpcmodule.c:463:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char desc[80];
data/miniupnpc-2.1/miniupnpcmodule.c:464:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char enabled[4];
data/miniupnpc-2.1/miniupnpcmodule.c:465:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char leaseDuration[16];
data/miniupnpc-2.1/miniupnpcmodule.c:471:2: [2] (buffer) sprintf:
Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or
vsnprintf. Risk is low because the source has a constant maximum length.
sprintf(extPort, "%hu", ePort);
data/miniupnpc-2.1/miniupnpcmodule.c:480:27: [2] (integer) atoi:
Unless checked, the resulting number can exceed the expected range
(CWE-190). If source untrusted, check both minimum and maximum, even if the
input had no minus sign (large numbers can roll over into negative number;
consider saving to an unsigned value if that is intended).
iPort = (unsigned short)atoi(intPort);
data/miniupnpc-2.1/miniupnpcmodule.c:483:40: [2] (integer) atoi:
Unless checked, the resulting number can exceed the expected range
(CWE-190). If source untrusted, check both minimum and maximum, even if the
input had no minus sign (large numbers can roll over into negative number;
consider saving to an unsigned value if that is intended).
PyBool_FromLong(atoi(enabled)),
data/miniupnpc-2.1/miniupnpcmodule.c:484:24: [2] (integer) atoi:
Unless checked, the resulting number can exceed the expected range
(CWE-190). If source untrusted, check both minimum and maximum, even if the
input had no minus sign (large numbers can roll over into negative number;
consider saving to an unsigned value if that is intended).
atoi(leaseDuration));
data/miniupnpc-2.1/miniupnpcmodule.c:497:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char index[8];
data/miniupnpc-2.1/miniupnpcmodule.c:498:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char intClient[40];
data/miniupnpc-2.1/miniupnpcmodule.c:499:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char intPort[6];
data/miniupnpc-2.1/miniupnpcmodule.c:501:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char extPort[6];
data/miniupnpc-2.1/miniupnpcmodule.c:503:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char protocol[4];
data/miniupnpc-2.1/miniupnpcmodule.c:504:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char desc[80];
data/miniupnpc-2.1/miniupnpcmodule.c:505:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char enabled[6];
data/miniupnpc-2.1/miniupnpcmodule.c:506:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char rHost[64];
data/miniupnpc-2.1/miniupnpcmodule.c:507:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char duration[16]; /* lease duration */
data/miniupnpc-2.1/miniupnpcmodule.c:525:27: [2] (integer) atoi:
Unless checked, the resulting number can exceed the expected range
(CWE-190). If source untrusted, check both minimum and maximum, even if the
input had no minus sign (large numbers can roll over into negative number;
consider saving to an unsigned value if that is intended).
ePort = (unsigned short)atoi(extPort);
data/miniupnpc-2.1/miniupnpcmodule.c:526:27: [2] (integer) atoi:
Unless checked, the resulting number can exceed the expected range
(CWE-190). If source untrusted, check both minimum and maximum, even if the
input had no minus sign (large numbers can roll over into negative number;
consider saving to an unsigned value if that is intended).
iPort = (unsigned short)atoi(intPort);
data/miniupnpc-2.1/miniwget.c:70:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char buf[2048];
data/miniupnpc-2.1/miniwget.c:84:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char chunksize_buf[32];
data/miniupnpc-2.1/miniwget.c:134:4: [2] (buffer) memcpy:
Does not check for buffer overflows when copying to destination (CWE-120).
Make sure destination can always hold the source data.
memcpy(header_buf + header_buf_used, buf, n);
data/miniupnpc-2.1/miniwget.c:183:25: [2] (integer) atoi:
Unless checked, the resulting number can exceed the expected range
(CWE-190). If source untrusted, check both minimum and maximum, even if the
input had no minus sign (large numbers can roll over into negative number;
consider saving to an unsigned value if that is intended).
*status_code = atoi(header_buf + sp + 1);
data/miniupnpc-2.1/miniwget.c:207:25: [2] (integer) atoi:
Unless checked, the resulting number can exceed the expected range
(CWE-190). If source untrusted, check both minimum and maximum, even if the
input had no minus sign (large numbers can roll over into negative number;
consider saving to an unsigned value if that is intended).
content_length = atoi(header_buf+valuestart);
data/miniupnpc-2.1/miniwget.c:230:4: [2] (buffer) memcpy:
Does not check for buffer overflows when copying to destination (CWE-120).
Make sure destination can always hold the source data.
memcpy(buf, header_buf + endofheaders, n);
data/miniupnpc-2.1/miniwget.c:307:5: [2] (buffer) memcpy:
Does not check for buffer overflows when copying to destination (CWE-120).
Make sure destination can always hold the source data.
memcpy(content_buf + content_buf_used, buf + i, bytestocopy);
data/miniupnpc-2.1/miniwget.c:340:4: [2] (buffer) memcpy:
Does not check for buffer overflows when copying to destination (CWE-120).
Make sure destination can always hold the source data.
memcpy(content_buf + content_buf_used, buf, n);
data/miniupnpc-2.1/miniwget.c:373:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char buf[2048];
data/miniupnpc-2.1/miniwget.c:544:4: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char tmp[IF_NAMESIZE];
data/miniupnpc-2.1/miniwget.c:553:4: [2] (buffer) memcpy:
Does not check for buffer overflows when copying to destination (CWE-120).
Make sure destination can always hold the source data.
memcpy(tmp, scope, l);
data/miniupnpc-2.1/miniwget.c:561:4: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char tmp[8];
data/miniupnpc-2.1/miniwget.c:570:4: [2] (buffer) memcpy:
Does not check for buffer overflows when copying to destination (CWE-120).
Make sure destination can always hold the source data.
memcpy(tmp, scope, l);
data/miniupnpc-2.1/miniwget.c:631:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char hostname[MAXHOSTNAMELEN+1];
data/miniupnpc-2.1/miniwget.c:650:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char hostname[MAXHOSTNAMELEN+1];
data/miniupnpc-2.1/portlistingparse.c:106:3: [2] (buffer) memcpy:
Does not check for buffer overflows when copying to destination (CWE-120).
Make sure destination can always hold the source data.
memcpy(pm->remoteHost, data, l);
data/miniupnpc-2.1/portlistingparse.c:115:3: [2] (buffer) memcpy:
Does not check for buffer overflows when copying to destination (CWE-120).
Make sure destination can always hold the source data.
memcpy(pm->protocol, data, l);
data/miniupnpc-2.1/portlistingparse.c:122:3: [2] (buffer) memcpy:
Does not check for buffer overflows when copying to destination (CWE-120).
Make sure destination can always hold the source data.
memcpy(pm->internalClient, data, l);
data/miniupnpc-2.1/portlistingparse.c:129:3: [2] (buffer) memcpy:
Does not check for buffer overflows when copying to destination (CWE-120).
Make sure destination can always hold the source data.
memcpy(pm->description, data, l);
data/miniupnpc-2.1/portlistingparse.h:42:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char remoteHost[64];
data/miniupnpc-2.1/portlistingparse.h:43:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char internalClient[64];
data/miniupnpc-2.1/portlistingparse.h:44:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char description[64];
data/miniupnpc-2.1/portlistingparse.h:45:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char protocol[4];
data/miniupnpc-2.1/testigddescparse.c:20:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char line[1024];
data/miniupnpc-2.1/testigddescparse.c:73:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char line[1024];
data/miniupnpc-2.1/testigddescparse.c:149:6: [2] (misc) fopen:
Check when opening files - can an attacker redirect it (via symlinks),
force the opening of special file type (e.g., device files), move things
around to create a race condition, control its ancestors, or change its
contents? (CWE-362).
f = fopen(argv[1], "r");
data/miniupnpc-2.1/testigddescparse.c:174:7: [2] (misc) fopen:
Check when opening files - can an attacker redirect it (via symlinks),
force the opening of special file type (e.g., device files), move things
around to create a race condition, control its ancestors, or change its
contents? (CWE-362).
f = fopen(argv[2], "r");
data/miniupnpc-2.1/testminiwget.c:23:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char addr[64];
data/miniupnpc-2.1/testminiwget.c:39:6: [2] (misc) fopen:
Check when opening files - can an attacker redirect it (via symlinks),
force the opening of special file type (e.g., device files), move things
around to create a race condition, control its ancestors, or change its
contents? (CWE-362).
f = fopen(argv[2], "wb");
data/miniupnpc-2.1/testminixml.c:71:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char buffer[XML_MAX_SIZE];
data/miniupnpc-2.1/testminixml.c:78:6: [2] (misc) fopen:
Check when opening files - can an attacker redirect it (via symlinks),
force the opening of special file type (e.g., device files), move things
around to create a race condition, control its ancestors, or change its
contents? (CWE-362).
f = fopen(argv[1], "r");
data/miniupnpc-2.1/testupnpreplyparse.c:15:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char line[1024];
data/miniupnpc-2.1/testupnpreplyparse.c:67:6: [2] (misc) fopen:
Check when opening files - can an attacker redirect it (via symlinks),
force the opening of special file type (e.g., device files), move things
around to create a race condition, control its ancestors, or change its
contents? (CWE-362).
f = fopen(argv[1], "r");
data/miniupnpc-2.1/testupnpreplyparse.c:97:7: [2] (misc) fopen:
Check when opening files - can an attacker redirect it (via symlinks),
force the opening of special file type (e.g., device files), move things
around to create a race condition, control its ancestors, or change its
contents? (CWE-362).
f = fopen(argv[2], "r");
data/miniupnpc-2.1/upnpc.c:31:15: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
static const char proto_tcp[4] = { 'T', 'C', 'P', 0};
data/miniupnpc-2.1/upnpc.c:32:15: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
static const char proto_udp[4] = { 'U', 'D', 'P', 0};
data/miniupnpc-2.1/upnpc.c:66:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char externalIPAddress[40];
data/miniupnpc-2.1/upnpc.c:67:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char connectionType[64];
data/miniupnpc-2.1/upnpc.c:68:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char status[64];
data/miniupnpc-2.1/upnpc.c:69:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char lastconnerr[64];
data/miniupnpc-2.1/upnpc.c:137:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char index[6];
data/miniupnpc-2.1/upnpc.c:138:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char intClient[40];
data/miniupnpc-2.1/upnpc.c:139:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char intPort[6];
data/miniupnpc-2.1/upnpc.c:140:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char extPort[6];
data/miniupnpc-2.1/upnpc.c:141:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char protocol[4];
data/miniupnpc-2.1/upnpc.c:142:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char desc[80];
data/miniupnpc-2.1/upnpc.c:143:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char enabled[6];
data/miniupnpc-2.1/upnpc.c:144:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char rHost[64];
data/miniupnpc-2.1/upnpc.c:145:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char duration[16];
data/miniupnpc-2.1/upnpc.c:256:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char externalIPAddress[40];
data/miniupnpc-2.1/upnpc.c:257:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char intClient[40];
data/miniupnpc-2.1/upnpc.c:258:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char intPort[6];
data/miniupnpc-2.1/upnpc.c:259:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char reservedPort[6];
data/miniupnpc-2.1/upnpc.c:260:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char duration[16];
data/miniupnpc-2.1/upnpc.c:407:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char uniqueID[8];
data/miniupnpc-2.1/upnpc.c:410:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char proto_tmp[8];
data/miniupnpc-2.1/upnpc.c:417:5: [2] (integer) atoi:
Unless checked, the resulting number can exceed the expected range
(CWE-190). If source untrusted, check both minimum and maximum, even if the
input had no minus sign (large numbers can roll over into negative number;
consider saving to an unsigned value if that is intended).
if(atoi(proto) == 0)
data/miniupnpc-2.1/upnpc.c:560:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char lanaddr[64] = "unset"; /* my ip address on the LAN */
data/miniupnpc-2.1/upnpc.c:621:26: [2] (integer) atoi:
Unless checked, the resulting number can exceed the expected range
(CWE-190). If source untrusted, check both minimum and maximum, even if the
input had no minus sign (large numbers can roll over into negative number;
consider saving to an unsigned value if that is intended).
ttl = (unsigned char)atoi(argv[++i]);
data/miniupnpc-2.1/upnpdev.h:23:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char buffer[3];
data/miniupnpc-2.1/upnpreplyparse.c:23:5: [2] (buffer) memcpy:
Does not check for buffer overflows when copying to destination (CWE-120).
Make sure destination can always hold the source data.
memcpy(data->curelt, name, l);
data/miniupnpc-2.1/upnpreplyparse.c:59:4: [2] (buffer) memcpy:
Does not check for buffer overflows when copying to destination (CWE-120).
Make sure destination can always hold the source data.
memcpy(nv->value, data->cdata, l);
data/miniupnpc-2.1/upnpreplyparse.c:91:3: [2] (buffer) memcpy:
Does not check for buffer overflows when copying to destination (CWE-120).
Make sure destination can always hold the source data.
memcpy(data->portListing, datas, l);
data/miniupnpc-2.1/upnpreplyparse.h:17:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char name[64];
data/miniupnpc-2.1/upnpreplyparse.h:18:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char value[128];
data/miniupnpc-2.1/upnpreplyparse.h:23:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char curelt[64];
data/miniupnpc-2.1/wingenminiupnpcstrings.c:16:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char buffer[256];
data/miniupnpc-2.1/wingenminiupnpcstrings.c:21:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char miniupnpcVersion[32];
data/miniupnpc-2.1/wingenminiupnpcstrings.c:44:8: [2] (misc) fopen:
Check when opening files - can an attacker redirect it (via symlinks),
force the opening of special file type (e.g., device files), move things
around to create a race condition, control its ancestors, or change its
contents? (CWE-362).
fin = fopen("VERSION", "r");
data/miniupnpc-2.1/wingenminiupnpcstrings.c:54:9: [2] (misc) fopen:
Check when opening files - can an attacker redirect it (via symlinks),
force the opening of special file type (e.g., device files), move things
around to create a race condition, control its ancestors, or change its
contents? (CWE-362).
fin = fopen(argv[1], "r");
data/miniupnpc-2.1/wingenminiupnpcstrings.c:59:10: [2] (misc) fopen:
Check when opening files - can an attacker redirect it (via symlinks),
force the opening of special file type (e.g., device files), move things
around to create a race condition, control its ancestors, or change its
contents? (CWE-362).
fout = fopen(argv[2], "w");
data/miniupnpc-2.1/wingenminiupnpcstrings.c:68:5: [2] (buffer) sprintf:
Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or
vsnprintf. Risk is low because the source has a constant maximum length.
sprintf(buffer, "#define OS_STRING \"MSWindows/%ld.%ld.%ld\"\n",
data/miniupnpc-2.1/connecthostport.c:173:3: [1] (buffer) strncpy:
Easily used incorrectly; doesn't always \0-terminate or check for invalid
pointers [MS-banned] (CWE-120).
strncpy(tmp_host, host, MAXHOSTNAMELEN);
data/miniupnpc-2.1/minihttptestserver.c:298:4: [1] (obsolete) usleep:
This C routine is considered obsolete (as opposed to the shell command by
the same name). The interaction of this function with SIGALRM and other
timer functions such as sleep(), alarm(), setitimer(), and nanosleep() is
unspecified (CWE-676). Use nanosleep(2) or setitimer(2) instead.
usleep(10000); /* 10ms */
data/miniupnpc-2.1/minihttptestserver.c:324:7: [1] (buffer) read:
Check buffer boundaries if used in a loop including recursive loops
(CWE-120, CWE-20).
n = read(c,
data/miniupnpc-2.1/minisoap.c:86:18: [1] (buffer) strlen:
Does not handle strings that are not \0-terminated; if given one it may
perform an over-read (it could cause a crash if unprotected) (CWE-126).
bodysize = (int)strlen(body);
data/miniupnpc-2.1/minissdpc.c:127:7: [1] (buffer) read:
Check buffer boundaries if used in a loop including recursive loops
(CWE-120, CWE-20).
n = read(s, buffer, sizeof(buffer)); \
data/miniupnpc-2.1/minissdpc.c:141:8: [1] (buffer) read:
Check buffer boundaries if used in a loop including recursive loops
(CWE-120, CWE-20).
n = read(s, buffer, sizeof(buffer)); \
data/miniupnpc-2.1/minissdpc.c:156:8: [1] (buffer) read:
Check buffer boundaries if used in a loop including recursive loops
(CWE-120, CWE-20).
n = read(s, buffer, sizeof(buffer)); \
data/miniupnpc-2.1/minissdpc.c:201:2: [1] (buffer) strncpy:
Easily used incorrectly; doesn't always \0-terminate or check for invalid
pointers [MS-banned] (CWE-120).
strncpy(addr.sun_path, socketpath, sizeof(addr.sun_path));
data/miniupnpc-2.1/minissdpc.c:227:11: [1] (buffer) strlen:
Does not handle strings that are not \0-terminated; if given one it may
perform an over-read (it could cause a crash if unprotected) (CWE-126).
stsize = strlen(devtype);
data/miniupnpc-2.1/minissdpc.c:272:6: [1] (buffer) read:
Check buffer boundaries if used in a loop including recursive loops
(CWE-120, CWE-20).
n = read(s, buffer, sizeof(buffer));
data/miniupnpc-2.1/minissdpc.c:675:5: [1] (buffer) strncpy:
Easily used incorrectly; doesn't always \0-terminate or check for invalid
pointers [MS-banned] (CWE-120).
strncpy(ifr.ifr_name, multicastif, IFNAMSIZ);
data/miniupnpc-2.1/miniupnpc.c:212:3: [1] (buffer) strncpy:
Easily used incorrectly; doesn't always \0-terminate or check for invalid
pointers [MS-banned] (CWE-120). Risk is low because the source is a
constant string.
strncpy(p, "></" SOAPPREFIX ":Body></" SOAPPREFIX ":Envelope>\r\n",
data/miniupnpc-2.1/miniupnpc.c:438:6: [1] (buffer) strlen:
Does not handle strings that are not \0-terminated; if given one it may
perform an over-read (it could cause a crash if unprotected) (CWE-126).
n = strlen(base);
data/miniupnpc-2.1/miniupnpc.c:444:10: [1] (buffer) strlen:
Does not handle strings that are not \0-terminated; if given one it may
perform an over-read (it could cause a crash if unprotected) (CWE-126).
l = n + strlen(url) + 1;
data/miniupnpc-2.1/miniupnpc.c:450:13: [1] (buffer) strlen:
Does not handle strings that are not \0-terminated; if given one it may
perform an over-read (it could cause a crash if unprotected) (CWE-126).
l += 3 + strlen(ifname); /* 3 == strlen(%25) */
data/miniupnpc-2.1/miniupnpc.c:468:21: [1] (buffer) strlen:
Does not handle strings that are not \0-terminated; if given one it may
perform an over-read (it could cause a crash if unprotected) (CWE-126).
memmove(p + 3 + strlen(ifname), p, strlen(p) + 1);
data/miniupnpc-2.1/miniupnpc.c:468:40: [1] (buffer) strlen:
Does not handle strings that are not \0-terminated; if given one it may
perform an over-read (it could cause a crash if unprotected) (CWE-126).
memmove(p + 3 + strlen(ifname), p, strlen(p) + 1);
data/miniupnpc-2.1/miniupnpc.c:470:27: [1] (buffer) strlen:
Does not handle strings that are not \0-terminated; if given one it may
perform an over-read (it could cause a crash if unprotected) (CWE-126).
memcpy(p + 3, ifname, strlen(ifname));
data/miniupnpc-2.1/miniupnpc.c:471:14: [1] (buffer) strlen:
Does not handle strings that are not \0-terminated; if given one it may
perform an over-read (it could cause a crash if unprotected) (CWE-126).
n += 3 + strlen(ifname);
data/miniupnpc-2.1/miniupnpc.c:473:21: [1] (buffer) strlen:
Does not handle strings that are not \0-terminated; if given one it may
perform an over-read (it could cause a crash if unprotected) (CWE-126).
memmove(p + 3 + strlen(scope_str), p, strlen(p) + 1);
data/miniupnpc-2.1/miniupnpc.c:473:43: [1] (buffer) strlen:
Does not handle strings that are not \0-terminated; if given one it may
perform an over-read (it could cause a crash if unprotected) (CWE-126).
memmove(p + 3 + strlen(scope_str), p, strlen(p) + 1);
data/miniupnpc-2.1/miniupnpc.c:475:30: [1] (buffer) strlen:
Does not handle strings that are not \0-terminated; if given one it may
perform an over-read (it could cause a crash if unprotected) (CWE-126).
memcpy(p + 3, scope_str, strlen(scope_str));
data/miniupnpc-2.1/miniupnpc.c:476:14: [1] (buffer) strlen:
Does not handle strings that are not \0-terminated; if given one it may
perform an over-read (it could cause a crash if unprotected) (CWE-126).
n += 3 + strlen(scope_str);
data/miniupnpc-2.1/miniupnpc.c:622:6: [1] (buffer) strncpy:
Easily used incorrectly; doesn't always \0-terminate or check for invalid
pointers [MS-banned] (CWE-120).
strncpy(lanaddr, myLanAddr, lanaddrlen);
data/miniupnpc-2.1/miniwget.c:407:4: [1] (buffer) strncpy:
Easily used incorrectly; doesn't always \0-terminate or check for invalid
pointers [MS-banned] (CWE-120).
strncpy(addr_str, inet_ntoa(((struct sockaddr_in *)&saddr)->sin_addr), addr_str_len);
data/miniupnpc-2.1/miniwget.c:579:4: [1] (buffer) strncpy:
Easily used incorrectly; doesn't always \0-terminate or check for invalid
pointers [MS-banned] (CWE-120).
strncpy(hostname, p1, MIN(MAXHOSTNAMELEN, (int)(p2-p1)));
data/miniupnpc-2.1/miniwget.c:605:3: [1] (buffer) strncpy:
Easily used incorrectly; doesn't always \0-terminate or check for invalid
pointers [MS-banned] (CWE-120).
strncpy(hostname, p1, MIN(MAXHOSTNAMELEN, (int)(p3-p1)));
data/miniupnpc-2.1/miniwget.c:610:3: [1] (buffer) strncpy:
Easily used incorrectly; doesn't always \0-terminate or check for invalid
pointers [MS-banned] (CWE-120).
strncpy(hostname, p1, MIN(MAXHOSTNAMELEN, (int)(p2-p1)));
data/miniupnpc-2.1/portlistingparse.c:58:6: [1] (buffer) strlen:
Does not handle strings that are not \0-terminated; if given one it may
perform an over-read (it could cause a crash if unprotected) (CWE-126).
if(strlen(elements[i].str) == (size_t)l && memcmp(name, elements[i].str, l) == 0)
data/miniupnpc-2.1/testigddescparse.c:24:10: [1] (buffer) equal:
Function does not check the second iterator for over-read conditions
(CWE-126). This function is often discouraged by most C++ coding standards
in favor of its safer alternatives provided since C++14. Consider using a
form of this function that checks the second iterator before potentially
overflowing it.
char * equal;
data/miniupnpc-2.1/testigddescparse.c:28:7: [1] (buffer) strlen:
Does not handle strings that are not \0-terminated; if given one it may
perform an over-read (it could cause a crash if unprotected) (CWE-126).
l = strlen(line);
data/miniupnpc-2.1/testigddescparse.c:44:7: [1] (buffer) strlen:
Does not handle strings that are not \0-terminated; if given one it may
perform an over-read (it could cause a crash if unprotected) (CWE-126).
l = strlen(name);
data/miniupnpc-2.1/testigddescparse.c:78:16: [1] (buffer) strlen:
Does not handle strings that are not \0-terminated; if given one it may
perform an over-read (it could cause a crash if unprotected) (CWE-126).
int l = (int)strlen(line);
data/miniupnpc-2.1/testupnpreplyparse.c:25:11: [1] (buffer) equal:
Function does not check the second iterator for over-read conditions
(CWE-126). This function is often discouraged by most C++ coding standards
in favor of its safer alternatives provided since C++14. Consider using a
form of this function that checks the second iterator before potentially
overflowing it.
char * equal;
data/miniupnpc-2.1/testupnpreplyparse.c:28:8: [1] (buffer) strlen:
Does not handle strings that are not \0-terminated; if given one it may
perform an over-read (it could cause a crash if unprotected) (CWE-126).
l = strlen(line);
data/miniupnpc-2.1/upnpcommands.c:154:4: [1] (buffer) strncpy:
Easily used incorrectly; doesn't always \0-terminate or check for invalid
pointers [MS-banned] (CWE-120).
strncpy(status, p, 64 );
data/miniupnpc-2.1/upnpcommands.c:169:4: [1] (buffer) strncpy:
Easily used incorrectly; doesn't always \0-terminate or check for invalid
pointers [MS-banned] (CWE-120).
strncpy(lastconnerror, err, 64 );
data/miniupnpc-2.1/upnpcommands.c:210:3: [1] (buffer) strncpy:
Easily used incorrectly; doesn't always \0-terminate or check for invalid
pointers [MS-banned] (CWE-120).
strncpy(connectionType, p, 64 );
data/miniupnpc-2.1/upnpcommands.c:322:3: [1] (buffer) strncpy:
Easily used incorrectly; doesn't always \0-terminate or check for invalid
pointers [MS-banned] (CWE-120).
strncpy(extIpAdd, p, 16 );
data/miniupnpc-2.1/upnpcommands.c:459:4: [1] (buffer) strncpy:
Easily used incorrectly; doesn't always \0-terminate or check for invalid
pointers [MS-banned] (CWE-120).
strncpy(reservedPort, p, 6);
data/miniupnpc-2.1/upnpcommands.c:605:3: [1] (buffer) strncpy:
Easily used incorrectly; doesn't always \0-terminate or check for invalid
pointers [MS-banned] (CWE-120).
strncpy(rHost, p, 64);
data/miniupnpc-2.1/upnpcommands.c:611:3: [1] (buffer) strncpy:
Easily used incorrectly; doesn't always \0-terminate or check for invalid
pointers [MS-banned] (CWE-120).
strncpy(extPort, p, 6);
data/miniupnpc-2.1/upnpcommands.c:618:3: [1] (buffer) strncpy:
Easily used incorrectly; doesn't always \0-terminate or check for invalid
pointers [MS-banned] (CWE-120).
strncpy(protocol, p, 4);
data/miniupnpc-2.1/upnpcommands.c:624:3: [1] (buffer) strncpy:
Easily used incorrectly; doesn't always \0-terminate or check for invalid
pointers [MS-banned] (CWE-120).
strncpy(intClient, p, 16);
data/miniupnpc-2.1/upnpcommands.c:631:3: [1] (buffer) strncpy:
Easily used incorrectly; doesn't always \0-terminate or check for invalid
pointers [MS-banned] (CWE-120).
strncpy(intPort, p, 6);
data/miniupnpc-2.1/upnpcommands.c:637:3: [1] (buffer) strncpy:
Easily used incorrectly; doesn't always \0-terminate or check for invalid
pointers [MS-banned] (CWE-120).
strncpy(enabled, p, 4);
data/miniupnpc-2.1/upnpcommands.c:643:3: [1] (buffer) strncpy:
Easily used incorrectly; doesn't always \0-terminate or check for invalid
pointers [MS-banned] (CWE-120).
strncpy(desc, p, 80);
data/miniupnpc-2.1/upnpcommands.c:649:3: [1] (buffer) strncpy:
Easily used incorrectly; doesn't always \0-terminate or check for invalid
pointers [MS-banned] (CWE-120).
strncpy(duration, p, 16);
data/miniupnpc-2.1/upnpcommands.c:746:3: [1] (buffer) strncpy:
Easily used incorrectly; doesn't always \0-terminate or check for invalid
pointers [MS-banned] (CWE-120).
strncpy(intClient, p, 16);
data/miniupnpc-2.1/upnpcommands.c:754:3: [1] (buffer) strncpy:
Easily used incorrectly; doesn't always \0-terminate or check for invalid
pointers [MS-banned] (CWE-120).
strncpy(intPort, p, 6);
data/miniupnpc-2.1/upnpcommands.c:761:3: [1] (buffer) strncpy:
Easily used incorrectly; doesn't always \0-terminate or check for invalid
pointers [MS-banned] (CWE-120).
strncpy(enabled, p, 4);
data/miniupnpc-2.1/upnpcommands.c:767:3: [1] (buffer) strncpy:
Easily used incorrectly; doesn't always \0-terminate or check for invalid
pointers [MS-banned] (CWE-120).
strncpy(desc, p, 80);
data/miniupnpc-2.1/upnpcommands.c:774:3: [1] (buffer) strncpy:
Easily used incorrectly; doesn't always \0-terminate or check for invalid
pointers [MS-banned] (CWE-120).
strncpy(leaseDuration, p, 16);
data/miniupnpc-2.1/upnpcommands.c:1044:3: [1] (buffer) strncpy:
Easily used incorrectly; doesn't always \0-terminate or check for invalid
pointers [MS-banned] (CWE-120).
strncpy(uniqueID, p, 8);
data/miniupnpc-2.1/upnpreplyparse.c:55:6: [1] (buffer) strncpy:
Easily used incorrectly; doesn't always \0-terminate or check for invalid
pointers [MS-banned] (CWE-120).
strncpy(nv->name, data->curelt, 64);
ANALYSIS SUMMARY:
Hits = 248
Lines analyzed = 9203 in approximately 0.30 seconds (30727 lines/second)
Physical Source Lines of Code (SLOC) = 7442
Hits@level = [0] 349 [1] 55 [2] 178 [3] 1 [4] 14 [5] 0
Hits@level+ = [0+] 597 [1+] 248 [2+] 193 [3+] 15 [4+] 14 [5+] 0
Hits/KSLOC@level+ = [0+] 80.2204 [1+] 33.3244 [2+] 25.9339 [3+] 2.01559 [4+] 1.88121 [5+] 0
Dot directories skipped = 1 (--followdotdir overrides)
Minimum risk level = 1
Not every hit is necessarily a security vulnerability.
There may be other security vulnerabilities; review your code!
See 'Secure Programming HOWTO'
(https://dwheeler.com/secure-programs) for more information.