Flawfinder version 2.0.10, (C) 2001-2019 David A. Wheeler.
Number of rules (primarily dangerous function names) in C/C++ ruleset: 223
Examining data/sleepd-2.11/acpi.c
Examining data/sleepd-2.11/acpi.h
Examining data/sleepd-2.11/apm.h
Examining data/sleepd-2.11/eventmonitor.c
Examining data/sleepd-2.11/eventmonitor.h
Examining data/sleepd-2.11/simplehal.c
Examining data/sleepd-2.11/simplehal.h
Examining data/sleepd-2.11/sleepctl.c
Examining data/sleepd-2.11/sleepd.c
Examining data/sleepd-2.11/sleepd.h
Examining data/sleepd-2.11/upower.c
Examining data/sleepd-2.11/upower.h
FINAL RESULTS:
data/sleepd-2.11/acpi.c:179:2: [4] (format) sprintf:
Potential format string problem (CWE-134). Make format string constant.
sprintf(pathname, SYSFS_PATH);
data/sleepd-2.11/acpi.c:194:3: [4] (format) snprintf:
If format strings can be influenced by an attacker, they can be exploited,
and note that sprintf variations do not always \0-terminate (CWE-134). Use
a constant for the format specification.
snprintf(filename, sizeof(filename), SYSFS_PATH "/%s/type", ent->d_name);
data/sleepd-2.11/acpi.c:216:3: [4] (format) snprintf:
If format strings can be influenced by an attacker, they can be exploited,
and note that sprintf variations do not always \0-terminate (CWE-134). Use
a constant for the format specification.
snprintf(infoarray[i], sizeof(infoarray[i]), SYSFS_PATH "/%s/%s", devices[i],
data/sleepd-2.11/acpi.c:218:3: [4] (format) snprintf:
If format strings can be influenced by an attacker, they can be exploited,
and note that sprintf variations do not always \0-terminate (CWE-134). Use
a constant for the format specification.
snprintf(statusarray[i], sizeof(statusarray[i]), SYSFS_PATH "/%s/%s", devices[i],
data/sleepd-2.11/eventmonitor.c:46:14: [4] (race) access:
This usually indicates a security flaw. If an attacker can change anything
along the path between the call to access() and the file's actual use
(e.g., by moving files), the attacker can exploit the race condition
(CWE-362/CWE-367!). Set up the correct permissions (e.g., using setuid())
and try to open the file directly.
result = access(devName, R_OK);
data/sleepd-2.11/sleepd.c:156:14: [4] (race) access:
This usually indicates a security flaw. If an attacker can change anything
along the path between the call to access() and the file's actual use
(e.g., by moving files), the attacker can exploit the race condition
(CWE-362/CWE-367!). Set up the correct permissions (e.g., using setuid())
and try to open the file directly.
result = access(optarg, R_OK);
data/sleepd-2.11/sleepd.c:215:5: [4] (format) sprintf:
Potential format string problem (CWE-134). Make format string constant.
sprintf(tx_statfile, TXFILE, tmpdev);
data/sleepd-2.11/sleepd.c:216:5: [4] (format) sprintf:
Potential format string problem (CWE-134). Make format string constant.
sprintf(rx_statfile, RXFILE, tmpdev);
data/sleepd-2.11/sleepd.c:217:10: [4] (race) access:
This usually indicates a security flaw. If an attacker can change anything
along the path between the call to access() and the file's actual use
(e.g., by moving files), the attacker can exploit the race condition
(CWE-362/CWE-367!). Set up the correct permissions (e.g., using setuid())
and try to open the file directly.
if ((access(tx_statfile, R_OK) == 0) &&
data/sleepd-2.11/sleepd.c:218:10: [4] (race) access:
This usually indicates a security flaw. If an attacker can change anything
along the path between the call to access() and the file's actual use
(e.g., by moving files), the attacker can exploit the race condition
(CWE-362/CWE-367!). Set up the correct permissions (e.g., using setuid())
and try to open the file directly.
(access(rx_statfile, R_OK) == 0)) {
data/sleepd-2.11/sleepd.c:487:8: [4] (shell) system:
This causes a new program to execute and is difficult to use safely
(CWE-78). try using a library call that implements the same functionality
if available.
if (system(hibernate_command) != 0)
data/sleepd-2.11/sleepd.c:561:9: [4] (shell) system:
This causes a new program to execute and is difficult to use safely
(CWE-78). try using a library call that implements the same functionality
if available.
if (system(sleep_command) != 0)
data/sleepd-2.11/sleepd.c:570:9: [4] (shell) system:
This causes a new program to execute and is difficult to use safely
(CWE-78). try using a library call that implements the same functionality
if available.
if (system(hibernate_command) != 0)
data/sleepd-2.11/sleepd.c:115:5: [3] (buffer) getopt_long:
Some older implementations do not protect against internal buffer overflows
(CWE-120, CWE-20). Check implementation on installation, or limit the size
of all string inputs.
c=getopt_long(argc,argv, "s:d:nvu:U:l:wIi:Ee:hac:b:AN::r:t:H", long_options, NULL);
data/sleepd-2.11/acpi.c:26:1: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char acpi_batt_info[ACPI_MAXITEM][128];
data/sleepd-2.11/acpi.c:28:1: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char acpi_batt_status[ACPI_MAXITEM][128];
data/sleepd-2.11/acpi.c:33:1: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char acpi_ac_adapter_info[ACPI_MAXITEM][128];
data/sleepd-2.11/acpi.c:34:1: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char acpi_ac_adapter_status[ACPI_MAXITEM][128];
data/sleepd-2.11/acpi.c:57:1: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char acpi_thermal_info[ACPI_MAXITEM][128];
data/sleepd-2.11/acpi.c:58:1: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char acpi_thermal_status[ACPI_MAXITEM][128];
data/sleepd-2.11/acpi.c:66:9: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
static char buf[1024];
data/sleepd-2.11/acpi.c:67:7: [2] (misc) open:
Check when opening files - can an attacker redirect it (via symlinks),
force the opening of special file type (e.g., device files), move things
around to create a race condition, control its ancestors, or change its
contents? (CWE-362).
fd = open(file, O_RDONLY);
data/sleepd-2.11/acpi.c:114:9: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
static char ret[256];
data/sleepd-2.11/acpi.c:155:10: [2] (integer) atoi:
Unless checked, the resulting number can exceed the expected range
(CWE-190). If source untrusted, check both minimum and maximum, even if the
input had no minus sign (large numbers can roll over into negative number;
consider saving to an unsigned value if that is intended).
return atoi(s);
data/sleepd-2.11/acpi.c:169:17: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
int find_items (char *itemname, char infoarray[ACPI_MAXITEM][128],
data/sleepd-2.11/acpi.c:169:33: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
int find_items (char *itemname, char infoarray[ACPI_MAXITEM][128],
data/sleepd-2.11/acpi.c:170:19: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char statusarray[ACPI_MAXITEM][128]) {
data/sleepd-2.11/acpi.c:177:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char pathname[128];
data/sleepd-2.11/acpi.c:187:3: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char filename[128];
data/sleepd-2.11/acpi.c:188:3: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char buf[1024];
data/sleepd-2.11/acpi.c:195:12: [2] (misc) open:
Check when opening files - can an attacker redirect it (via symlinks),
force the opening of special file type (e.g., device files), move things
around to create a race condition, control its ancestors, or change its
contents? (CWE-362).
int fd = open(filename, O_RDONLY);
data/sleepd-2.11/acpi.c:257:17: [2] (integer) atoi:
Unless checked, the resulting number can exceed the expected range
(CWE-190). If source untrusted, check both minimum and maximum, even if the
input had no minus sign (large numbers can roll over into negative number;
consider saving to an unsigned value if that is intended).
if (online && atoi(online))
data/sleepd-2.11/acpi.c:284:8: [2] (integer) atoi:
Unless checked, the resulting number can exceed the expected range
(CWE-190). If source untrusted, check both minimum and maximum, even if the
input had no minus sign (large numbers can roll over into negative number;
consider saving to an unsigned value if that is intended).
num = atoi(version);
data/sleepd-2.11/acpi.h:30:8: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
extern char acpi_batt_info[ACPI_MAXITEM][128];
data/sleepd-2.11/acpi.h:32:8: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
extern char acpi_batt_status[ACPI_MAXITEM][128];
data/sleepd-2.11/acpi.h:37:8: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
extern char acpi_ac_adapter_info[ACPI_MAXITEM][128];
data/sleepd-2.11/acpi.h:38:8: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
extern char acpi_ac_adapter_status[ACPI_MAXITEM][128];
data/sleepd-2.11/acpi.h:42:8: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
extern char acpi_thermal_info[ACPI_MAXITEM][128];
data/sleepd-2.11/acpi.h:43:8: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
extern char acpi_thermal_status[ACPI_MAXITEM][128];
data/sleepd-2.11/apm.h:5:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char driver_version[10];
data/sleepd-2.11/eventmonitor.c:44:4: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char devName[128];
data/sleepd-2.11/eventmonitor.c:58:12: [2] (misc) open:
Check when opening files - can an attacker redirect it (via symlinks),
force the opening of special file type (e.g., device files), move things
around to create a race condition, control its ancestors, or change its
contents? (CWE-362).
tmpfd = open(eventData.events[i], O_RDONLY);
data/sleepd-2.11/eventmonitor.h:4:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char events[MAX_CHANNELS][128];
data/sleepd-2.11/sleepctl.c:22:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char buf[10];
data/sleepd-2.11/sleepctl.c:25:9: [2] (misc) open:
Check when opening files - can an attacker redirect it (via symlinks),
force the opening of special file type (e.g., device files), move things
around to create a race condition, control its ancestors, or change its
contents? (CWE-362).
if ((f=open(PID_FILE, O_RDONLY)) == -1) {
data/sleepd-2.11/sleepctl.c:31:6: [2] (integer) atoi:
Unless checked, the resulting number can exceed the expected range
(CWE-190). If source untrusted, check both minimum and maximum, even if the
input had no minus sign (large numbers can roll over into negative number;
consider saving to an unsigned value if that is intended).
pid=atoi(buf);
data/sleepd-2.11/sleepctl.c:45:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char buf[8];
data/sleepd-2.11/sleepctl.c:47:9: [2] (misc) open:
Check when opening files - can an attacker redirect it (via symlinks),
force the opening of special file type (e.g., device files), move things
around to create a race condition, control its ancestors, or change its
contents? (CWE-362).
if ((f=open(CONTROL_FILE, O_RDONLY)) == -1) {
data/sleepd-2.11/sleepctl.c:55:9: [2] (integer) atoi:
Unless checked, the resulting number can exceed the expected range
(CWE-190). If source untrusted, check both minimum and maximum, even if the
input had no minus sign (large numbers can roll over into negative number;
consider saving to an unsigned value if that is intended).
return atoi(buf);
data/sleepd-2.11/sleepctl.c:60:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char buf[10];
data/sleepd-2.11/sleepctl.c:63:9: [2] (misc) open:
Check when opening files - can an attacker redirect it (via symlinks),
force the opening of special file type (e.g., device files), move things
around to create a race condition, control its ancestors, or change its
contents? (CWE-362).
if ((f=open(CONTROL_FILE, O_WRONLY | O_CREAT, 0644)) == -1) {
data/sleepd-2.11/sleepd.c:67:1: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char netdevtx[MAX_NET][44];
data/sleepd-2.11/sleepd.c:68:1: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char netdevrx[MAX_NET][44];
data/sleepd-2.11/sleepd.c:110:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char tmpdev[8];
data/sleepd-2.11/sleepd.c:111:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char tx_statfile[44];
data/sleepd-2.11/sleepd.c:112:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char rx_statfile[44];
data/sleepd-2.11/sleepd.c:130:16: [2] (integer) atoi:
Unless checked, the resulting number can exceed the expected range
(CWE-190). If source untrusted, check both minimum and maximum, even if the
input had no minus sign (large numbers can roll over into negative number;
consider saving to an unsigned value if that is intended).
max_unused=atoi(optarg);
data/sleepd-2.11/sleepd.c:133:19: [2] (integer) atoi:
Unless checked, the resulting number can exceed the expected range
(CWE-190). If source untrusted, check both minimum and maximum, even if the
input had no minus sign (large numbers can roll over into negative number;
consider saving to an unsigned value if that is intended).
ac_max_unused=atoi(optarg);
data/sleepd-2.11/sleepd.c:146:9: [2] (integer) atoi:
Unless checked, the resulting number can exceed the expected range
(CWE-190). If source untrusted, check both minimum and maximum, even if the
input had no minus sign (large numbers can roll over into negative number;
consider saving to an unsigned value if that is intended).
i = atoi(optarg);
data/sleepd-2.11/sleepd.c:151:10: [2] (integer) atoi:
Unless checked, the resulting number can exceed the expected range
(CWE-190). If source untrusted, check both minimum and maximum, even if the
input had no minus sign (large numbers can roll over into negative number;
consider saving to an unsigned value if that is intended).
irqs[atoi(optarg)]=1;
data/sleepd-2.11/sleepd.c:189:16: [2] (integer) atoi:
Unless checked, the resulting number can exceed the expected range
(CWE-190). If source untrusted, check both minimum and maximum, even if the
input had no minus sign (large numbers can roll over into negative number;
consider saving to an unsigned value if that is intended).
sleep_time=atoi(optarg);
data/sleepd-2.11/sleepd.c:196:14: [2] (integer) atoi:
Unless checked, the resulting number can exceed the expected range
(CWE-190). If source untrusted, check both minimum and maximum, even if the
input had no minus sign (large numbers can roll over into negative number;
consider saving to an unsigned value if that is intended).
min_batt=atoi(optarg);
data/sleepd-2.11/sleepd.c:205:7: [2] (buffer) sprintf:
Does not check for buffer overflows (CWE-120). Use sprintf_s, snprintf, or
vsnprintf. Risk is low because the source has a constant maximum length.
sprintf(tmpdev, "eth0");
data/sleepd-2.11/sleepd.c:230:14: [2] (integer) atoi:
Unless checked, the resulting number can exceed the expected range
(CWE-190). If source untrusted, check both minimum and maximum, even if the
input had no minus sign (large numbers can roll over into negative number;
consider saving to an unsigned value if that is intended).
min_tx = atoi(optarg);
data/sleepd-2.11/sleepd.c:233:14: [2] (integer) atoi:
Unless checked, the resulting number can exceed the expected range
(CWE-190). If source untrusted, check both minimum and maximum, even if the
input had no minus sign (large numbers can roll over into negative number;
consider saving to an unsigned value if that is intended).
min_rx = atoi(optarg);
data/sleepd-2.11/sleepd.c:261:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char buf[8];
data/sleepd-2.11/sleepd.c:263:10: [2] (misc) open:
Check when opening files - can an attacker redirect it (via symlinks),
force the opening of special file type (e.g., device files), move things
around to create a race condition, control its ancestors, or change its
contents? (CWE-362).
if (((f=open(CONTROL_FILE, O_RDONLY)) == -1) ||
data/sleepd-2.11/sleepd.c:267:11: [2] (integer) atoi:
Unless checked, the resulting number can exceed the expected range
(CWE-190). If source untrusted, check both minimum and maximum, even if the
input had no minus sign (large numbers can roll over into negative number;
consider saving to an unsigned value if that is intended).
no_sleep=atoi(buf);
data/sleepd-2.11/sleepd.c:275:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char buf[10];
data/sleepd-2.11/sleepd.c:277:9: [2] (misc) open:
Check when opening files - can an attacker redirect it (via symlinks),
force the opening of special file type (e.g., device files), move things
around to create a race condition, control its ancestors, or change its
contents? (CWE-362).
if ((f=open(CONTROL_FILE, O_WRONLY | O_CREAT, 0644)) == -1) {
data/sleepd-2.11/sleepd.c:300:2: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char line[64];
data/sleepd-2.11/sleepd.c:303:4: [2] (misc) fopen:
Check when opening files - can an attacker redirect it (via symlinks),
force the opening of special file type (e.g., device files), move things
around to create a race condition, control its ancestors, or change its
contents? (CWE-362).
f=fopen(INTERRUPTS, "r");
data/sleepd-2.11/sleepd.c:354:4: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char line[64];
data/sleepd-2.11/sleepd.c:355:12: [2] (misc) fopen:
Check when opening files - can an attacker redirect it (via symlinks),
force the opening of special file type (e.g., device files), move things
around to create a race condition, control its ancestors, or change its
contents? (CWE-362).
FILE *f=fopen(netdevtx[i], "r");
data/sleepd-2.11/sleepd.c:364:6: [2] (misc) fopen:
Check when opening files - can an attacker redirect it (via symlinks),
force the opening of special file type (e.g., device files), move things
around to create a race condition, control its ancestors, or change its
contents? (CWE-362).
f=fopen(netdevrx[i], "r");
data/sleepd-2.11/sleepd.c:403:4: [2] (buffer) char:
Statically-sized arrays can be improperly restricted, leading to potential
overflows or other issues (CWE-119!/CWE-120). Perform bounds checking, use
functions that limit length, or ensure that the size is larger than the
maximum possible length.
char tty[5 + sizeof u->ut_line + 1] = "/dev/";
data/sleepd-2.11/sleepd.c:631:10: [2] (misc) fopen:
Check when opening files - can an attacker redirect it (via symlinks),
force the opening of special file type (e.g., device files), move things
around to create a race condition, control its ancestors, or change its
contents? (CWE-362).
if ((f=fopen(PID_FILE, "w")) == NULL) {
data/sleepd-2.11/acpi.c:69:8: [1] (buffer) read:
Check buffer boundaries if used in a loop including recursive loops
(CWE-120, CWE-20).
end = read(fd, buf, sizeof(buf));
data/sleepd-2.11/acpi.c:120:9: [1] (buffer) sscanf:
It's unclear if the %s limit in the format string is small enough
(CWE-120). Check that the limit is sufficiently small, or use a different
input function.
if (sscanf(ptr + 1, "%255s", ret) == 1) {
data/sleepd-2.11/acpi.c:197:14: [1] (buffer) read:
Check buffer boundaries if used in a loop including recursive loops
(CWE-120, CWE-20).
int end = read(fd, buf, sizeof(buf));
data/sleepd-2.11/eventmonitor.c:48:6: [1] (buffer) strncpy:
Easily used incorrectly; doesn't always \0-terminate or check for invalid
pointers [MS-banned] (CWE-120).
strncpy(eventData.events[j], devName, 127);
data/sleepd-2.11/eventmonitor.c:52:4: [1] (buffer) strncpy:
Easily used incorrectly; doesn't always \0-terminate or check for invalid
pointers [MS-banned] (CWE-120). Risk is low because the source is a
constant character.
strncpy(eventData.events[j], "", 1);
data/sleepd-2.11/sleepctl.c:28:6: [1] (buffer) read:
Check buffer boundaries if used in a loop including recursive loops
(CWE-120, CWE-20).
if (read(f, buf, 9) == -1) {
data/sleepd-2.11/sleepctl.c:51:6: [1] (buffer) read:
Check buffer boundaries if used in a loop including recursive loops
(CWE-120, CWE-20).
if (read(f, buf, 7) == -1) {
data/sleepd-2.11/sleepctl.c:68:16: [1] (buffer) strlen:
Does not handle strings that are not \0-terminated; if given one it may
perform an over-read (it could cause a crash if unprotected) (CWE-126).
write(f, buf, strlen(buf));
data/sleepd-2.11/sleepd.c:159:7: [1] (buffer) strncpy:
Easily used incorrectly; doesn't always \0-terminate or check for invalid
pointers [MS-banned] (CWE-120).
strncpy(eventData.events[event], optarg,127);
data/sleepd-2.11/sleepd.c:213:6: [1] (buffer) strncpy:
Easily used incorrectly; doesn't always \0-terminate or check for invalid
pointers [MS-banned] (CWE-120).
strncpy(tmpdev, optarg, 8);
data/sleepd-2.11/sleepd.c:219:6: [1] (buffer) strncpy:
Easily used incorrectly; doesn't always \0-terminate or check for invalid
pointers [MS-banned] (CWE-120).
strncpy(netdevtx[netcount], tx_statfile, 44);
data/sleepd-2.11/sleepd.c:220:6: [1] (buffer) strncpy:
Easily used incorrectly; doesn't always \0-terminate or check for invalid
pointers [MS-banned] (CWE-120).
strncpy(netdevrx[netcount], rx_statfile, 44);
data/sleepd-2.11/sleepd.c:246:3: [1] (buffer) strncpy:
Easily used incorrectly; doesn't always \0-terminate or check for invalid
pointers [MS-banned] (CWE-120). Risk is low because the source is a
constant character.
strncpy(eventData.events[event], "", 1);
data/sleepd-2.11/sleepd.c:249:3: [1] (buffer) strncpy:
Easily used incorrectly; doesn't always \0-terminate or check for invalid
pointers [MS-banned] (CWE-120). Risk is low because the source is a
constant character.
strncpy(netdevtx[netcount], "", 1);
data/sleepd-2.11/sleepd.c:250:3: [1] (buffer) strncpy:
Easily used incorrectly; doesn't always \0-terminate or check for invalid
pointers [MS-banned] (CWE-120). Risk is low because the source is a
constant character.
strncpy(netdevrx[netcount], "", 1);
data/sleepd-2.11/sleepd.c:265:8: [1] (buffer) read:
Check buffer boundaries if used in a loop including recursive loops
(CWE-120, CWE-20).
(read(f, buf, 7) == -1))
data/sleepd-2.11/sleepd.c:281:16: [1] (buffer) strlen:
Does not handle strings that are not \0-terminated; if given one it may
perform an over-read (it could cause a crash if unprotected) (CWE-126).
write(f, buf, strlen(buf));
ANALYSIS SUMMARY:
Hits = 94
Lines analyzed = 1902 in approximately 0.07 seconds (25754 lines/second)
Physical Source Lines of Code (SLOC) = 1526
Hits@level = [0] 60 [1] 17 [2] 63 [3] 1 [4] 13 [5] 0
Hits@level+ = [0+] 154 [1+] 94 [2+] 77 [3+] 14 [4+] 13 [5+] 0
Hits/KSLOC@level+ = [0+] 100.917 [1+] 61.599 [2+] 50.4587 [3+] 9.17431 [4+] 8.519 [5+] 0
Minimum risk level = 1
Not every hit is necessarily a security vulnerability.
There may be other security vulnerabilities; review your code!
See 'Secure Programming HOWTO'
(https://dwheeler.com/secure-programs) for more information.