===========================================================
.___ __ __
_________________ __ __ __| _/|__|/ |_
/ ___\_` __ \__ \ | | \/ __ | | \\_ __\
/ /_/ > | \// __ \| | / /_/ | | || |
\___ /|__| (____ /____/\____ | |__||__|
/_____/ \/ \/
grep rough audit - static analysis tool
v2.8 written by @Wireghoul
=================================[justanotherhacker.com]===
bip-0.9.0~rc4/install-sh-234- fi
bip-0.9.0~rc4/install-sh:235: cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
bip-0.9.0~rc4/install-sh-236- *)
##############################################
bip-0.9.0~rc4/install-sh-280- dstdir=$dst
bip-0.9.0~rc4/install-sh:281: dstbase=`basename "$src"`
bip-0.9.0~rc4/install-sh-282- case $dst in
##############################################
bip-0.9.0~rc4/install-sh-287- else
bip-0.9.0~rc4/install-sh:288: dstdir=`dirname "$dst"`
bip-0.9.0~rc4/install-sh-289- test -d "$dstdir"
##############################################
bip-0.9.0~rc4/install-sh-354- test_tmpdir="$tmpdir/a"
bip-0.9.0~rc4/install-sh:355: ls_ld_tmpdir=`ls -ld "$test_tmpdir"`
bip-0.9.0~rc4/install-sh-356- case $ls_ld_tmpdir in
##############################################
bip-0.9.0~rc4/install-sh-361- $mkdirprog -m$different_mode -p -- "$test_tmpdir" && {
bip-0.9.0~rc4/install-sh:362: ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"`
bip-0.9.0~rc4/install-sh-363- test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
##############################################
bip-0.9.0~rc4/install-sh-419- case $prefix in
bip-0.9.0~rc4/install-sh:420: *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
bip-0.9.0~rc4/install-sh-421- *) qprefix=$prefix;;
##############################################
bip-0.9.0~rc4/install-sh-468- if $copy_on_change &&
bip-0.9.0~rc4/install-sh:469: old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
bip-0.9.0~rc4/install-sh:470: new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
bip-0.9.0~rc4/install-sh-471- set -f &&
##############################################
bip-0.9.0~rc4/Makefile.in-50- { \
bip-0.9.0~rc4/Makefile.in:51: flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
bip-0.9.0~rc4/Makefile.in-52- }; \
##############################################
bip-0.9.0~rc4/Makefile.in-128- esac
bip-0.9.0~rc4/Makefile.in:129:am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
bip-0.9.0~rc4/Makefile.in-130-am__vpath_adj = case $$p in \
bip-0.9.0~rc4/Makefile.in:131: $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
bip-0.9.0~rc4/Makefile.in-132- *) f=$$p;; \
bip-0.9.0~rc4/Makefile.in-133- esac;
bip-0.9.0~rc4/Makefile.in:134:am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
bip-0.9.0~rc4/Makefile.in-135-am__install_max = 40
bip-0.9.0~rc4/Makefile.in-136-am__nobase_strip_setup = \
bip-0.9.0~rc4/Makefile.in:137: srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
bip-0.9.0~rc4/Makefile.in-138-am__nobase_strip = \
##############################################
bip-0.9.0~rc4/Makefile.in-211- while test -n "$$dir1"; do \
bip-0.9.0~rc4/Makefile.in:212: first=`echo "$$dir1" | sed -e "$$sed_first"`; \
bip-0.9.0~rc4/Makefile.in-213- if test "$$first" != "."; then \
bip-0.9.0~rc4/Makefile.in-214- if test "$$first" = ".."; then \
bip-0.9.0~rc4/Makefile.in:215: dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
bip-0.9.0~rc4/Makefile.in:216: dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
bip-0.9.0~rc4/Makefile.in-217- else \
bip-0.9.0~rc4/Makefile.in:218: first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
bip-0.9.0~rc4/Makefile.in-219- if test "$$first2" = "$$first"; then \
bip-0.9.0~rc4/Makefile.in:220: dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
bip-0.9.0~rc4/Makefile.in-221- else \
##############################################
bip-0.9.0~rc4/Makefile.in-226- fi; \
bip-0.9.0~rc4/Makefile.in:227: dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
bip-0.9.0~rc4/Makefile.in-228- done; \
##############################################
bip-0.9.0~rc4/Makefile.in-389- test -n "$(man1dir)" \
bip-0.9.0~rc4/Makefile.in:390: && test -n "`echo $$list1$$list2`" \
bip-0.9.0~rc4/Makefile.in-391- || exit 0; \
##############################################
bip-0.9.0~rc4/Makefile.in-432- test -n "$(man5dir)" \
bip-0.9.0~rc4/Makefile.in:433: && test -n "`echo $$list1$$list2`" \
bip-0.9.0~rc4/Makefile.in-434- || exit 0; \
##############################################
bip-0.9.0~rc4/Makefile.in-489- @list='$(dist_examples_DATA)'; test -n "$(examplesdir)" || list=; \
bip-0.9.0~rc4/Makefile.in:490: files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
bip-0.9.0~rc4/Makefile.in-491- dir='$(DESTDIR)$(examplesdir)'; $(am__uninstall_files_from_dir)
##############################################
bip-0.9.0~rc4/Makefile.in-506- dot_seen=no; \
bip-0.9.0~rc4/Makefile.in:507: target=`echo $@ | sed s/-recursive//`; \
bip-0.9.0~rc4/Makefile.in-508- case "$@" in \
##############################################
bip-0.9.0~rc4/Makefile.in-569-GTAGS:
bip-0.9.0~rc4/Makefile.in:570: here=`$(am__cd) $(top_builddir) && pwd` \
bip-0.9.0~rc4/Makefile.in-571- && $(am__cd) $(top_srcdir) \
##############################################
bip-0.9.0~rc4/Makefile.in-604- test -d "$(distdir)" || mkdir "$(distdir)"
bip-0.9.0~rc4/Makefile.in:605: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
bip-0.9.0~rc4/Makefile.in:606: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
bip-0.9.0~rc4/Makefile.in-607- list='$(DISTFILES)'; \
##############################################
bip-0.9.0~rc4/Makefile.in-618- if test -d $$d/$$file; then \
bip-0.9.0~rc4/Makefile.in:619: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
bip-0.9.0~rc4/Makefile.in-620- if test -d "$(distdir)/$$file"; then \
##############################################
bip-0.9.0~rc4/Makefile.in-735- test -d $(distdir)/_build || exit 0; \
bip-0.9.0~rc4/Makefile.in:736: dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
bip-0.9.0~rc4/Makefile.in-737- && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
##############################################
bip-0.9.0~rc4/Makefile.in-779- }; \
bip-0.9.0~rc4/Makefile.in:780: test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
bip-0.9.0~rc4/Makefile.in-781- || { echo "ERROR: files left after uninstall:" ; \
##############################################
bip-0.9.0~rc4/Makefile.in-791- fi
bip-0.9.0~rc4/Makefile.in:792: @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
bip-0.9.0~rc4/Makefile.in-793- || { echo "ERROR: files left in build directory after distclean:" ; \
##############################################
bip-0.9.0~rc4/configure-45-if test -z "$BASH_VERSION$ZSH_VERSION" \
bip-0.9.0~rc4/configure:46: && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
bip-0.9.0~rc4/configure-47- as_echo='print -r --'
bip-0.9.0~rc4/configure-48- as_echo_n='print -rn --'
bip-0.9.0~rc4/configure:49:elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
bip-0.9.0~rc4/configure-50- as_echo='printf %s\n'
##############################################
bip-0.9.0~rc4/configure-52-else
bip-0.9.0~rc4/configure:53: if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
bip-0.9.0~rc4/configure-54- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
##############################################
bip-0.9.0~rc4/configure-62- expr "X$arg" : "X\\(.*\\)$as_nl";
bip-0.9.0~rc4/configure:63: arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
bip-0.9.0~rc4/configure-64- esac;
##############################################
bip-0.9.0~rc4/configure-199- eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
bip-0.9.0~rc4/configure:200: test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1"
bip-0.9.0~rc4/configure-201- if (eval "$as_required") 2>/dev/null; then :
##############################################
bip-0.9.0~rc4/configure-326- case $as_dir in #(
bip-0.9.0~rc4/configure:327: *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
bip-0.9.0~rc4/configure-328- *) as_qdir=$as_dir;;
##############################################
bip-0.9.0~rc4/configure-399- {
bip-0.9.0~rc4/configure:400: as_val=`expr "$@" || test $? -eq 1`
bip-0.9.0~rc4/configure-401- }
##############################################
bip-0.9.0~rc4/configure-406-# ----------------------------------------
bip-0.9.0~rc4/configure:407:# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
bip-0.9.0~rc4/configure-408-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
##############################################
bip-0.9.0~rc4/configure-469- eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
bip-0.9.0~rc4/configure:470: test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
bip-0.9.0~rc4/configure-471- # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
##############################################
bip-0.9.0~rc4/configure-780- case $ac_option in
bip-0.9.0~rc4/configure:781: *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
bip-0.9.0~rc4/configure-782- *=) ac_optarg= ;;
##############################################
bip-0.9.0~rc4/configure-824- -disable-* | --disable-*)
bip-0.9.0~rc4/configure:825: ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
bip-0.9.0~rc4/configure-826- # Reject names that are not valid shell variable names.
##############################################
bip-0.9.0~rc4/configure-829- ac_useropt_orig=$ac_useropt
bip-0.9.0~rc4/configure:830: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
bip-0.9.0~rc4/configure-831- case $ac_user_opts in
##############################################
bip-0.9.0~rc4/configure-850- -enable-* | --enable-*)
bip-0.9.0~rc4/configure:851: ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
bip-0.9.0~rc4/configure-852- # Reject names that are not valid shell variable names.
##############################################
bip-0.9.0~rc4/configure-855- ac_useropt_orig=$ac_useropt
bip-0.9.0~rc4/configure:856: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
bip-0.9.0~rc4/configure-857- case $ac_user_opts in
##############################################
bip-0.9.0~rc4/configure-1063- -with-* | --with-*)
bip-0.9.0~rc4/configure:1064: ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
bip-0.9.0~rc4/configure-1065- # Reject names that are not valid shell variable names.
##############################################
bip-0.9.0~rc4/configure-1068- ac_useropt_orig=$ac_useropt
bip-0.9.0~rc4/configure:1069: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
bip-0.9.0~rc4/configure-1070- case $ac_user_opts in
##############################################
bip-0.9.0~rc4/configure-1079- -without-* | --without-*)
bip-0.9.0~rc4/configure:1080: ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
bip-0.9.0~rc4/configure-1081- # Reject names that are not valid shell variable names.
##############################################
bip-0.9.0~rc4/configure-1084- ac_useropt_orig=$ac_useropt
bip-0.9.0~rc4/configure:1085: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
bip-0.9.0~rc4/configure-1086- case $ac_user_opts in
##############################################
bip-0.9.0~rc4/configure-1117- *=*)
bip-0.9.0~rc4/configure:1118: ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
bip-0.9.0~rc4/configure-1119- # Reject names that are not valid shell variable names.
##############################################
bip-0.9.0~rc4/configure-1138-if test -n "$ac_prev"; then
bip-0.9.0~rc4/configure:1139: ac_option=--`echo $ac_prev | sed 's/_/-/g'`
bip-0.9.0~rc4/configure-1140- as_fn_error $? "missing argument to $ac_option"
##############################################
bip-0.9.0~rc4/configure-1160- */ )
bip-0.9.0~rc4/configure:1161: ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
bip-0.9.0~rc4/configure-1162- eval $ac_var=\$ac_val;;
##############################################
bip-0.9.0~rc4/configure-1195-ac_ls_di=`ls -di .` &&
bip-0.9.0~rc4/configure:1196:ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
bip-0.9.0~rc4/configure-1197- as_fn_error $? "working directory cannot be determined"
##############################################
bip-0.9.0~rc4/configure-1251-case $srcdir in
bip-0.9.0~rc4/configure:1252:*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
bip-0.9.0~rc4/configure-1253-esac
##############################################
bip-0.9.0~rc4/configure-1294-By default, \`make install' will install all the files in
bip-0.9.0~rc4/configure:1295:\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
bip-0.9.0~rc4/configure:1296:an installation prefix other than \`$ac_default_prefix' using \`--prefix',
bip-0.9.0~rc4/configure-1297-for instance \`--prefix=\$HOME'.
##############################################
bip-0.9.0~rc4/configure-1399-*)
bip-0.9.0~rc4/configure:1400: ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
bip-0.9.0~rc4/configure-1401- # A ".." for each directory in $ac_dir_suffix.
bip-0.9.0~rc4/configure:1402: ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
bip-0.9.0~rc4/configure-1403- case $ac_top_builddir_sub in
##############################################
bip-0.9.0~rc4/configure-1728- *\'*)
bip-0.9.0~rc4/configure:1729: ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
bip-0.9.0~rc4/configure-1730- esac
##############################################
bip-0.9.0~rc4/configure-1811- case $ac_val in
bip-0.9.0~rc4/configure:1812: *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
bip-0.9.0~rc4/configure-1813- esac
##############################################
bip-0.9.0~rc4/configure-1826- case $ac_val in
bip-0.9.0~rc4/configure:1827: *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
bip-0.9.0~rc4/configure-1828- esac
##############################################
bip-0.9.0~rc4/configure-1946- set,)
bip-0.9.0~rc4/configure:1947: { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
bip-0.9.0~rc4/configure:1948:$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
bip-0.9.0~rc4/configure-1949- ac_cache_corrupted=: ;;
##############################################
bip-0.9.0~rc4/configure-1957- # differences in whitespace do not lead to failure.
bip-0.9.0~rc4/configure:1958: ac_old_val_w=`echo x $ac_old_val`
bip-0.9.0~rc4/configure:1959: ac_new_val_w=`echo x $ac_new_val`
bip-0.9.0~rc4/configure-1960- if test "$ac_old_val_w" != "$ac_new_val_w"; then
##############################################
bip-0.9.0~rc4/configure-1977- case $ac_new_val in
bip-0.9.0~rc4/configure:1978: *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
bip-0.9.0~rc4/configure-1979- *) ac_arg=$ac_var=$ac_new_val ;;
##############################################
bip-0.9.0~rc4/configure-2152- echo "timestamp, slept: $am_has_slept" > conftest.file
bip-0.9.0~rc4/configure:2153: set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
bip-0.9.0~rc4/configure-2154- if test "$*" = "X"; then
bip-0.9.0~rc4/configure-2155- # -L didn't work.
bip-0.9.0~rc4/configure:2156: set X `ls -t "$srcdir/configure" conftest.file`
bip-0.9.0~rc4/configure-2157- fi
##############################################
bip-0.9.0~rc4/configure-2203-ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
bip-0.9.0~rc4/configure:2204:program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
bip-0.9.0~rc4/configure-2205-
bip-0.9.0~rc4/configure-2206-# Expand $ac_aux_dir to an absolute path.
bip-0.9.0~rc4/configure:2207:am_aux_dir=`cd "$ac_aux_dir" && pwd`
bip-0.9.0~rc4/configure-2208-
##############################################
bip-0.9.0~rc4/configure-2348- as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue
bip-0.9.0~rc4/configure:2349: case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
bip-0.9.0~rc4/configure-2350- 'mkdir (GNU coreutils) '* | \
##############################################
bip-0.9.0~rc4/configure-2421-set x ${MAKE-make}
bip-0.9.0~rc4/configure:2422:ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
bip-0.9.0~rc4/configure-2423-if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
##############################################
bip-0.9.0~rc4/configure-2431-# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
bip-0.9.0~rc4/configure:2432:case `${MAKE-make} -f conftest.make 2>/dev/null` in
bip-0.9.0~rc4/configure-2433- *@@@%%%=?*=@@@%%%*)
##############################################
bip-0.9.0~rc4/configure-2497-
bip-0.9.0~rc4/configure:2498:if test "`cd $srcdir && pwd`" != "`pwd`"; then
bip-0.9.0~rc4/configure-2499- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
##############################################
bip-0.9.0~rc4/configure-2986-$as_echo_n "checking whether the C compiler works... " >&6; }
bip-0.9.0~rc4/configure:2987:ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
bip-0.9.0~rc4/configure-2988-
##############################################
bip-0.9.0~rc4/configure-3030- then :; else
bip-0.9.0~rc4/configure:3031: ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
bip-0.9.0~rc4/configure-3032- fi
##############################################
bip-0.9.0~rc4/configure-3090- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
bip-0.9.0~rc4/configure:3091: *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
bip-0.9.0~rc4/configure-3092- break;;
##############################################
bip-0.9.0~rc4/configure-3199- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
bip-0.9.0~rc4/configure:3200: *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
bip-0.9.0~rc4/configure-3201- break;;
##############################################
bip-0.9.0~rc4/configure-3580- if test "$am_compiler_list" = ""; then
bip-0.9.0~rc4/configure:3581: am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
bip-0.9.0~rc4/configure-3582- fi
##############################################
bip-0.9.0~rc4/configure-4050-/* end confdefs.h. */
bip-0.9.0~rc4/configure:4051:`cat $LEX_OUTPUT_ROOT.c`
bip-0.9.0~rc4/configure-4052-_ACEOF
##############################################
bip-0.9.0~rc4/configure-4083- #define YYTEXT_POINTER 1
bip-0.9.0~rc4/configure:4084:`cat $LEX_OUTPUT_ROOT.c`
bip-0.9.0~rc4/configure-4085-_ACEOF
##############################################
bip-0.9.0~rc4/configure-4285- test $ac_status = 0; }; then
bip-0.9.0~rc4/configure:4286: pkg_cv_OPENSSL_CFLAGS=`$PKG_CONFIG --cflags "libssl >= 0.9.8 libcrypto >= 0.9.8" 2>/dev/null`
bip-0.9.0~rc4/configure-4287- test "x$?" != "x0" && pkg_failed=yes
##############################################
bip-0.9.0~rc4/configure-4302- test $ac_status = 0; }; then
bip-0.9.0~rc4/configure:4303: pkg_cv_OPENSSL_LIBS=`$PKG_CONFIG --libs "libssl >= 0.9.8 libcrypto >= 0.9.8" 2>/dev/null`
bip-0.9.0~rc4/configure-4304- test "x$?" != "x0" && pkg_failed=yes
##############################################
bip-0.9.0~rc4/configure-4323- if test $_pkg_short_errors_supported = yes; then
bip-0.9.0~rc4/configure:4324: OPENSSL_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libssl >= 0.9.8 libcrypto >= 0.9.8" 2>&1`
bip-0.9.0~rc4/configure-4325- else
bip-0.9.0~rc4/configure:4326: OPENSSL_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libssl >= 0.9.8 libcrypto >= 0.9.8" 2>&1`
bip-0.9.0~rc4/configure-4327- fi
##############################################
bip-0.9.0~rc4/configure-4401- test $ac_status = 0; }; then
bip-0.9.0~rc4/configure:4402: pkg_cv_CHECK_CFLAGS=`$PKG_CONFIG --cflags "check >= 0.9.6" 2>/dev/null`
bip-0.9.0~rc4/configure-4403- test "x$?" != "x0" && pkg_failed=yes
##############################################
bip-0.9.0~rc4/configure-4418- test $ac_status = 0; }; then
bip-0.9.0~rc4/configure:4419: pkg_cv_CHECK_LIBS=`$PKG_CONFIG --libs "check >= 0.9.6" 2>/dev/null`
bip-0.9.0~rc4/configure-4420- test "x$?" != "x0" && pkg_failed=yes
##############################################
bip-0.9.0~rc4/configure-4439- if test $_pkg_short_errors_supported = yes; then
bip-0.9.0~rc4/configure:4440: CHECK_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "check >= 0.9.6" 2>&1`
bip-0.9.0~rc4/configure-4441- else
bip-0.9.0~rc4/configure:4442: CHECK_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "check >= 0.9.6" 2>&1`
bip-0.9.0~rc4/configure-4443- fi
##############################################
bip-0.9.0~rc4/configure-4580- ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
bip-0.9.0~rc4/configure:4581: ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
bip-0.9.0~rc4/configure-4582- # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
##############################################
bip-0.9.0~rc4/configure-4679-if test -z "$BASH_VERSION$ZSH_VERSION" \
bip-0.9.0~rc4/configure:4680: && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
bip-0.9.0~rc4/configure-4681- as_echo='print -r --'
bip-0.9.0~rc4/configure-4682- as_echo_n='print -rn --'
bip-0.9.0~rc4/configure:4683:elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
bip-0.9.0~rc4/configure-4684- as_echo='printf %s\n'
##############################################
bip-0.9.0~rc4/configure-4686-else
bip-0.9.0~rc4/configure:4687: if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
bip-0.9.0~rc4/configure-4688- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
##############################################
bip-0.9.0~rc4/configure-4696- expr "X$arg" : "X\\(.*\\)$as_nl";
bip-0.9.0~rc4/configure:4697: arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
bip-0.9.0~rc4/configure-4698- esac;
##############################################
bip-0.9.0~rc4/configure-4773-# ----------------------------------------
bip-0.9.0~rc4/configure:4774:# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
bip-0.9.0~rc4/configure-4775-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
##############################################
bip-0.9.0~rc4/configure-4845- {
bip-0.9.0~rc4/configure:4846: as_val=`expr "$@" || test $? -eq 1`
bip-0.9.0~rc4/configure-4847- }
##############################################
bip-0.9.0~rc4/configure-4949- case $as_dir in #(
bip-0.9.0~rc4/configure:4950: *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
bip-0.9.0~rc4/configure-4951- *) as_qdir=$as_dir;;
##############################################
bip-0.9.0~rc4/configure-5085-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
bip-0.9.0~rc4/configure:5086:ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
bip-0.9.0~rc4/configure-5087-ac_cs_version="\\
##############################################
bip-0.9.0~rc4/configure-5110- --*=?*)
bip-0.9.0~rc4/configure:5111: ac_option=`expr "X$1" : 'X\([^=]*\)='`
bip-0.9.0~rc4/configure:5112: ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
bip-0.9.0~rc4/configure-5113- ac_shift=:
##############################################
bip-0.9.0~rc4/configure-5115- --*=)
bip-0.9.0~rc4/configure:5116: ac_option=`expr "X$1" : 'X\([^=]*\)='`
bip-0.9.0~rc4/configure-5117- ac_optarg=
##############################################
bip-0.9.0~rc4/configure-5139- case $ac_optarg in
bip-0.9.0~rc4/configure:5140: *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
bip-0.9.0~rc4/configure-5141- '') as_fn_error $? "missing file argument" ;;
##############################################
bip-0.9.0~rc4/configure-5147- case $ac_optarg in
bip-0.9.0~rc4/configure:5148: *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
bip-0.9.0~rc4/configure-5149- esac
##############################################
bip-0.9.0~rc4/configure-5277-fi
bip-0.9.0~rc4/configure:5278:ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
bip-0.9.0~rc4/configure-5279-if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
##############################################
bip-0.9.0~rc4/configure-5294- as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
bip-0.9.0~rc4/configure:5295:ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
bip-0.9.0~rc4/configure-5296-ac_delim='%!_!# '
##############################################
bip-0.9.0~rc4/configure-5300-
bip-0.9.0~rc4/configure:5301: ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
bip-0.9.0~rc4/configure-5302- if test $ac_delim_n = $ac_delim_num; then
##############################################
bip-0.9.0~rc4/configure-5438-for ac_last_try in false false :; do
bip-0.9.0~rc4/configure:5439: ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
bip-0.9.0~rc4/configure-5440- if test -z "$ac_tt"; then
##############################################
bip-0.9.0~rc4/configure-5570- esac
bip-0.9.0~rc4/configure:5571: case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
bip-0.9.0~rc4/configure-5572- as_fn_append ac_file_inputs " '$ac_f'"
##############################################
bip-0.9.0~rc4/configure-5629-*)
bip-0.9.0~rc4/configure:5630: ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
bip-0.9.0~rc4/configure-5631- # A ".." for each directory in $ac_dir_suffix.
bip-0.9.0~rc4/configure:5632: ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
bip-0.9.0~rc4/configure-5633- case $ac_top_builddir_sub in
##############################################
bip-0.9.0~rc4/configure-5690-/@mandir@/p'
bip-0.9.0~rc4/configure:5691:case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
bip-0.9.0~rc4/configure-5692-*datarootdir*) ac_datarootdir_seen=yes;;
##############################################
bip-0.9.0~rc4/configure-5707-
bip-0.9.0~rc4/configure:5708:# Neutralize VPATH when `$srcdir' = `.'.
bip-0.9.0~rc4/configure-5709-# Shell code in configure.ac might set extrasub.
##############################################
bip-0.9.0~rc4/configure-5735-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
bip-0.9.0~rc4/configure:5736: { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
bip-0.9.0~rc4/configure-5737- { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \
##############################################
bip-0.9.0~rc4/configure-5781- * )
bip-0.9.0~rc4/configure:5782: _am_stamp_count=`expr $_am_stamp_count + 1` ;;
bip-0.9.0~rc4/configure-5783- esac
##############################################
bip-0.9.0~rc4/configure-5836- # Strip MF so we end up with the name of the file.
bip-0.9.0~rc4/configure:5837: am_mf=`$as_echo "$am_mf" | sed -e 's/:.*$//'`
bip-0.9.0~rc4/configure-5838- # Check whether this is an Automake generated Makefile which includes
##############################################
bip-0.9.0~rc4/ylwrap-101-# We'll later need for a correct munging of "#line" directives.
bip-0.9.0~rc4/ylwrap:102:input_sub_rx=`get_dirname "$input" | quote_for_sed`
bip-0.9.0~rc4/ylwrap-103-case $input in
##############################################
bip-0.9.0~rc4/ylwrap-111-esac
bip-0.9.0~rc4/ylwrap:112:input_rx=`get_dirname "$input" | quote_for_sed`
bip-0.9.0~rc4/ylwrap-113-
##############################################
bip-0.9.0~rc4/ylwrap-150- shift
bip-0.9.0~rc4/ylwrap:151: sed_fix_filenames="${sed_fix_filenames}s|"`quote_for_sed "$from"`"|$to|g;"
bip-0.9.0~rc4/ylwrap:152: sed_fix_header_guards="${sed_fix_header_guards}s|"`guard "$from"`"|"`guard "$to"`"|g;"
bip-0.9.0~rc4/ylwrap-153-done
##############################################
bip-0.9.0~rc4/ylwrap-182- do
bip-0.9.0~rc4/ylwrap:183: to=`printf '%s\n' "$from" | sed "$sed_fix_filenames"`
bip-0.9.0~rc4/ylwrap-184- if test -f "$from"; then
##############################################
bip-0.9.0~rc4/ylwrap-198- realtarget=$target
bip-0.9.0~rc4/ylwrap:199: target=tmp-`printf '%s\n' "$target" | sed 's|.*[\\/]||g'`
bip-0.9.0~rc4/ylwrap-200- fi
##############################################
bip-0.9.0~rc4/aclocal.m4-131- PKG_CHECK_EXISTS([$3],
bip-0.9.0~rc4/aclocal.m4:132: [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`
bip-0.9.0~rc4/aclocal.m4-133- test "x$?" != "x0" && pkg_failed=yes ],
##############################################
bip-0.9.0~rc4/aclocal.m4-179- if test $_pkg_short_errors_supported = yes; then
bip-0.9.0~rc4/aclocal.m4:180: $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1`
bip-0.9.0~rc4/aclocal.m4-181- else
bip-0.9.0~rc4/aclocal.m4:182: $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1`
bip-0.9.0~rc4/aclocal.m4-183- fi
##############################################
bip-0.9.0~rc4/aclocal.m4-428-# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
bip-0.9.0~rc4/aclocal.m4:429:# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
bip-0.9.0~rc4/aclocal.m4-430-# and then we would define $MISSING as
##############################################
bip-0.9.0~rc4/aclocal.m4-443-# Expand $ac_aux_dir to an absolute path.
bip-0.9.0~rc4/aclocal.m4:444:am_aux_dir=`cd "$ac_aux_dir" && pwd`
bip-0.9.0~rc4/aclocal.m4-445-])
##############################################
bip-0.9.0~rc4/aclocal.m4-541- if test "$am_compiler_list" = ""; then
bip-0.9.0~rc4/aclocal.m4:542: am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
bip-0.9.0~rc4/aclocal.m4-543- fi
##############################################
bip-0.9.0~rc4/aclocal.m4-694- # Strip MF so we end up with the name of the file.
bip-0.9.0~rc4/aclocal.m4:695: am_mf=`AS_ECHO(["$am_mf"]) | sed -e 's/:.*$//'`
bip-0.9.0~rc4/aclocal.m4-696- # Check whether this is an Automake generated Makefile which includes
##############################################
bip-0.9.0~rc4/aclocal.m4-701- || continue
bip-0.9.0~rc4/aclocal.m4:702: am_dirpart=`AS_DIRNAME(["$am_mf"])`
bip-0.9.0~rc4/aclocal.m4:703: am_filepart=`AS_BASENAME(["$am_mf"])`
bip-0.9.0~rc4/aclocal.m4-704- AM_RUN_LOG([cd "$am_dirpart" \
##############################################
bip-0.9.0~rc4/aclocal.m4-771-AC_REQUIRE([AC_PROG_INSTALL])dnl
bip-0.9.0~rc4/aclocal.m4:772:if test "`cd $srcdir && pwd`" != "`pwd`"; then
bip-0.9.0~rc4/aclocal.m4-773- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
##############################################
bip-0.9.0~rc4/aclocal.m4-930- * )
bip-0.9.0~rc4/aclocal.m4:931: _am_stamp_count=`expr $_am_stamp_count + 1` ;;
bip-0.9.0~rc4/aclocal.m4-932- esac
bip-0.9.0~rc4/aclocal.m4-933-done
bip-0.9.0~rc4/aclocal.m4:934:echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
bip-0.9.0~rc4/aclocal.m4-935-
##############################################
bip-0.9.0~rc4/aclocal.m4-1240- echo "timestamp, slept: $am_has_slept" > conftest.file
bip-0.9.0~rc4/aclocal.m4:1241: set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
bip-0.9.0~rc4/aclocal.m4-1242- if test "$[*]" = "X"; then
bip-0.9.0~rc4/aclocal.m4-1243- # -L didn't work.
bip-0.9.0~rc4/aclocal.m4:1244: set X `ls -t "$srcdir/configure" conftest.file`
bip-0.9.0~rc4/aclocal.m4-1245- fi
##############################################
bip-0.9.0~rc4/tests/Makefile.in-49- { \
bip-0.9.0~rc4/tests/Makefile.in:50: flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
bip-0.9.0~rc4/tests/Makefile.in-51- }; \
##############################################
bip-0.9.0~rc4/tests/Makefile.in-187-}
bip-0.9.0~rc4/tests/Makefile.in:188:am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
bip-0.9.0~rc4/tests/Makefile.in-189-am__vpath_adj = case $$p in \
bip-0.9.0~rc4/tests/Makefile.in:190: $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
bip-0.9.0~rc4/tests/Makefile.in-191- *) f=$$p;; \
bip-0.9.0~rc4/tests/Makefile.in-192- esac;
bip-0.9.0~rc4/tests/Makefile.in:193:am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
bip-0.9.0~rc4/tests/Makefile.in-194-am__install_max = 40
bip-0.9.0~rc4/tests/Makefile.in-195-am__nobase_strip_setup = \
bip-0.9.0~rc4/tests/Makefile.in:196: srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
bip-0.9.0~rc4/tests/Makefile.in-197-am__nobase_strip = \
##############################################
bip-0.9.0~rc4/tests/Makefile.in-315-case "$@" in \
bip-0.9.0~rc4/tests/Makefile.in:316: */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;; \
bip-0.9.0~rc4/tests/Makefile.in-317- *) am__odir=.;; \
##############################################
bip-0.9.0~rc4/tests/Makefile.in-345- bases='$(TEST_LOGS)'; \
bip-0.9.0~rc4/tests/Makefile.in:346: bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
bip-0.9.0~rc4/tests/Makefile.in:347: bases=`echo $$bases`
bip-0.9.0~rc4/tests/Makefile.in-348-RECHECK_LOGS = $(TEST_LOGS)
##############################################
bip-0.9.0~rc4/tests/Makefile.in-358- */*) b='$*';; \
bip-0.9.0~rc4/tests/Makefile.in:359: *) b=`echo '$@' | sed 's/\.log$$//'`; \
bip-0.9.0~rc4/tests/Makefile.in-360- esac;; \
##############################################
bip-0.9.0~rc4/tests/Makefile.in-532-.c.o:
bip-0.9.0~rc4/tests/Makefile.in:533:@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
bip-0.9.0~rc4/tests/Makefile.in-534-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
##############################################
bip-0.9.0~rc4/tests/Makefile.in-540-.c.obj:
bip-0.9.0~rc4/tests/Makefile.in:541:@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
bip-0.9.0~rc4/tests/Makefile.in:542:@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\
bip-0.9.0~rc4/tests/Makefile.in-543-@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po
##############################################
bip-0.9.0~rc4/tests/Makefile.in-545-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
bip-0.9.0~rc4/tests/Makefile.in:546:@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
bip-0.9.0~rc4/tests/Makefile.in-547-
bip-0.9.0~rc4/tests/Makefile.in-548-check_line-check_line.o: check_line.c
bip-0.9.0~rc4/tests/Makefile.in:549:@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(check_line_CFLAGS) $(CFLAGS) -MT check_line-check_line.o -MD -MP -MF $(DEPDIR)/check_line-check_line.Tpo -c -o check_line-check_line.o `test -f 'check_line.c' || echo '$(srcdir)/'`check_line.c
bip-0.9.0~rc4/tests/Makefile.in-550-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/check_line-check_line.Tpo $(DEPDIR)/check_line-check_line.Po
##############################################
bip-0.9.0~rc4/tests/Makefile.in-552-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
bip-0.9.0~rc4/tests/Makefile.in:553:@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(check_line_CFLAGS) $(CFLAGS) -c -o check_line-check_line.o `test -f 'check_line.c' || echo '$(srcdir)/'`check_line.c
bip-0.9.0~rc4/tests/Makefile.in-554-
bip-0.9.0~rc4/tests/Makefile.in-555-check_line-check_line.obj: check_line.c
bip-0.9.0~rc4/tests/Makefile.in:556:@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(check_line_CFLAGS) $(CFLAGS) -MT check_line-check_line.obj -MD -MP -MF $(DEPDIR)/check_line-check_line.Tpo -c -o check_line-check_line.obj `if test -f 'check_line.c'; then $(CYGPATH_W) 'check_line.c'; else $(CYGPATH_W) '$(srcdir)/check_line.c'; fi`
bip-0.9.0~rc4/tests/Makefile.in-557-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/check_line-check_line.Tpo $(DEPDIR)/check_line-check_line.Po
##############################################
bip-0.9.0~rc4/tests/Makefile.in-559-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
bip-0.9.0~rc4/tests/Makefile.in:560:@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(check_line_CFLAGS) $(CFLAGS) -c -o check_line-check_line.obj `if test -f 'check_line.c'; then $(CYGPATH_W) 'check_line.c'; else $(CYGPATH_W) '$(srcdir)/check_line.c'; fi`
bip-0.9.0~rc4/tests/Makefile.in-561-
##############################################
bip-0.9.0~rc4/tests/Makefile.in-591-GTAGS:
bip-0.9.0~rc4/tests/Makefile.in:592: here=`$(am__cd) $(top_builddir) && pwd` \
bip-0.9.0~rc4/tests/Makefile.in-593- && $(am__cd) $(top_srcdir) \
##############################################
bip-0.9.0~rc4/tests/Makefile.in-634- if test -n "$$redo_bases"; then \
bip-0.9.0~rc4/tests/Makefile.in:635: redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
bip-0.9.0~rc4/tests/Makefile.in:636: redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
bip-0.9.0~rc4/tests/Makefile.in-637- if $(am__make_dryrun); then :; else \
##############################################
bip-0.9.0~rc4/tests/Makefile.in-659- ws='[ ]'; \
bip-0.9.0~rc4/tests/Makefile.in:660: results=`for b in $$bases; do echo $$b.trs; done`; \
bip-0.9.0~rc4/tests/Makefile.in-661- test -n "$$results" || results=/dev/null; \
bip-0.9.0~rc4/tests/Makefile.in:662: all=` grep "^$$ws*:test-result:" $$results | wc -l`; \
bip-0.9.0~rc4/tests/Makefile.in:663: pass=` grep "^$$ws*:test-result:$$ws*PASS" $$results | wc -l`; \
bip-0.9.0~rc4/tests/Makefile.in:664: fail=` grep "^$$ws*:test-result:$$ws*FAIL" $$results | wc -l`; \
bip-0.9.0~rc4/tests/Makefile.in:665: skip=` grep "^$$ws*:test-result:$$ws*SKIP" $$results | wc -l`; \
bip-0.9.0~rc4/tests/Makefile.in:666: xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
bip-0.9.0~rc4/tests/Makefile.in:667: xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
bip-0.9.0~rc4/tests/Makefile.in:668: error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
bip-0.9.0~rc4/tests/Makefile.in:669: if test `expr $$fail + $$xpass + $$error` -eq 0; then \
bip-0.9.0~rc4/tests/Makefile.in-670- success=true; \
##############################################
bip-0.9.0~rc4/tests/Makefile.in-738- @set +e; $(am__set_TESTS_bases); \
bip-0.9.0~rc4/tests/Makefile.in:739: log_list=`for i in $$bases; do echo $$i.log; done`; \
bip-0.9.0~rc4/tests/Makefile.in:740: trs_list=`for i in $$bases; do echo $$i.trs; done`; \
bip-0.9.0~rc4/tests/Makefile.in:741: log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \
bip-0.9.0~rc4/tests/Makefile.in-742- $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \
##############################################
bip-0.9.0~rc4/tests/Makefile.in-748- | $(am__list_recheck_tests)` || exit 1; \
bip-0.9.0~rc4/tests/Makefile.in:749: log_list=`for i in $$bases; do echo $$i.log; done`; \
bip-0.9.0~rc4/tests/Makefile.in:750: log_list=`echo $$log_list`; \
bip-0.9.0~rc4/tests/Makefile.in-751- $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
##############################################
bip-0.9.0~rc4/tests/Makefile.in-780-distdir-am: $(DISTFILES)
bip-0.9.0~rc4/tests/Makefile.in:781: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
bip-0.9.0~rc4/tests/Makefile.in:782: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
bip-0.9.0~rc4/tests/Makefile.in-783- list='$(DISTFILES)'; \
##############################################
bip-0.9.0~rc4/tests/Makefile.in-794- if test -d $$d/$$file; then \
bip-0.9.0~rc4/tests/Makefile.in:795: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
bip-0.9.0~rc4/tests/Makefile.in-796- if test -d "$(distdir)/$$file"; then \
##############################################
bip-0.9.0~rc4/ar-lib-65- mingw)
bip-0.9.0~rc4/ar-lib:66: file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
bip-0.9.0~rc4/ar-lib-67- ;;
bip-0.9.0~rc4/ar-lib-68- cygwin)
bip-0.9.0~rc4/ar-lib:69: file=`cygpath -m "$file" || echo "$file"`
bip-0.9.0~rc4/ar-lib-70- ;;
bip-0.9.0~rc4/ar-lib-71- wine)
bip-0.9.0~rc4/ar-lib:72: file=`winepath -w "$file" || echo "$file"`
bip-0.9.0~rc4/ar-lib-73- ;;
##############################################
bip-0.9.0~rc4/ar-lib-88- archive=$3
bip-0.9.0~rc4/ar-lib:89: at_file_contents=`cat "$1"`
bip-0.9.0~rc4/ar-lib-90- eval set x "$at_file_contents"
##############################################
bip-0.9.0~rc4/depcomp-64- case $1 in
bip-0.9.0~rc4/depcomp:65: */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;;
bip-0.9.0~rc4/depcomp-66- *) dir=;;
##############################################
bip-0.9.0~rc4/depcomp-73-{
bip-0.9.0~rc4/depcomp:74: base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'`
bip-0.9.0~rc4/depcomp-75-}
##############################################
bip-0.9.0~rc4/depcomp-126- sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
bip-0.9.0~rc4/depcomp:127:tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
bip-0.9.0~rc4/depcomp-128-
##############################################
bip-0.9.0~rc4/depcomp-405- sleep 1
bip-0.9.0~rc4/depcomp:406: i=`expr $i - 1`
bip-0.9.0~rc4/depcomp-407- done
bip-0.9.0~rc4/depcomp-408- fi
bip-0.9.0~rc4/depcomp:409: i=`expr $i - 1`
bip-0.9.0~rc4/depcomp-410- done
##############################################
bip-0.9.0~rc4/depcomp-425- # Do two passes, one to just change these to
bip-0.9.0~rc4/depcomp:426: # `$object: dependent.h' and one to simply `dependent.h:'.
bip-0.9.0~rc4/depcomp-427- sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
##############################################
bip-0.9.0~rc4/depcomp-659- done
bip-0.9.0~rc4/depcomp:660: obj_suffix=`echo "$object" | sed 's/^.*\././'`
bip-0.9.0~rc4/depcomp-661- touch "$tmpdepfile"
##############################################
bip-0.9.0~rc4/src/Makefile.in-51- { \
bip-0.9.0~rc4/src/Makefile.in:52: flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
bip-0.9.0~rc4/src/Makefile.in-53- }; \
##############################################
bip-0.9.0~rc4/src/Makefile.in-475-.c.o:
bip-0.9.0~rc4/src/Makefile.in:476:@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
bip-0.9.0~rc4/src/Makefile.in-477-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
##############################################
bip-0.9.0~rc4/src/Makefile.in-483-.c.obj:
bip-0.9.0~rc4/src/Makefile.in:484:@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
bip-0.9.0~rc4/src/Makefile.in:485:@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\
bip-0.9.0~rc4/src/Makefile.in-486-@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po
##############################################
bip-0.9.0~rc4/src/Makefile.in-488-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
bip-0.9.0~rc4/src/Makefile.in:489:@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
bip-0.9.0~rc4/src/Makefile.in-490-
bip-0.9.0~rc4/src/Makefile.in-491-libbip_a-conf.o: conf.c
bip-0.9.0~rc4/src/Makefile.in:492:@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libbip_a_CFLAGS) $(CFLAGS) -MT libbip_a-conf.o -MD -MP -MF $(DEPDIR)/libbip_a-conf.Tpo -c -o libbip_a-conf.o `test -f 'conf.c' || echo '$(srcdir)/'`conf.c
bip-0.9.0~rc4/src/Makefile.in-493-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libbip_a-conf.Tpo $(DEPDIR)/libbip_a-conf.Po
##############################################
bip-0.9.0~rc4/src/Makefile.in-495-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
bip-0.9.0~rc4/src/Makefile.in:496:@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libbip_a_CFLAGS) $(CFLAGS) -c -o libbip_a-conf.o `test -f 'conf.c' || echo '$(srcdir)/'`conf.c
bip-0.9.0~rc4/src/Makefile.in-497-
bip-0.9.0~rc4/src/Makefile.in-498-libbip_a-conf.obj: conf.c
bip-0.9.0~rc4/src/Makefile.in:499:@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libbip_a_CFLAGS) $(CFLAGS) -MT libbip_a-conf.obj -MD -MP -MF $(DEPDIR)/libbip_a-conf.Tpo -c -o libbip_a-conf.obj `if test -f 'conf.c'; then $(CYGPATH_W) 'conf.c'; else $(CYGPATH_W) '$(srcdir)/conf.c'; fi`
bip-0.9.0~rc4/src/Makefile.in-500-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libbip_a-conf.Tpo $(DEPDIR)/libbip_a-conf.Po
##############################################
bip-0.9.0~rc4/src/Makefile.in-502-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
bip-0.9.0~rc4/src/Makefile.in:503:@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libbip_a_CFLAGS) $(CFLAGS) -c -o libbip_a-conf.obj `if test -f 'conf.c'; then $(CYGPATH_W) 'conf.c'; else $(CYGPATH_W) '$(srcdir)/conf.c'; fi`
bip-0.9.0~rc4/src/Makefile.in-504-
bip-0.9.0~rc4/src/Makefile.in-505-libbip_a-lex.o: lex.c
bip-0.9.0~rc4/src/Makefile.in:506:@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libbip_a_CFLAGS) $(CFLAGS) -MT libbip_a-lex.o -MD -MP -MF $(DEPDIR)/libbip_a-lex.Tpo -c -o libbip_a-lex.o `test -f 'lex.c' || echo '$(srcdir)/'`lex.c
bip-0.9.0~rc4/src/Makefile.in-507-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libbip_a-lex.Tpo $(DEPDIR)/libbip_a-lex.Po
##############################################
bip-0.9.0~rc4/src/Makefile.in-509-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
bip-0.9.0~rc4/src/Makefile.in:510:@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libbip_a_CFLAGS) $(CFLAGS) -c -o libbip_a-lex.o `test -f 'lex.c' || echo '$(srcdir)/'`lex.c
bip-0.9.0~rc4/src/Makefile.in-511-
bip-0.9.0~rc4/src/Makefile.in-512-libbip_a-lex.obj: lex.c
bip-0.9.0~rc4/src/Makefile.in:513:@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libbip_a_CFLAGS) $(CFLAGS) -MT libbip_a-lex.obj -MD -MP -MF $(DEPDIR)/libbip_a-lex.Tpo -c -o libbip_a-lex.obj `if test -f 'lex.c'; then $(CYGPATH_W) 'lex.c'; else $(CYGPATH_W) '$(srcdir)/lex.c'; fi`
bip-0.9.0~rc4/src/Makefile.in-514-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libbip_a-lex.Tpo $(DEPDIR)/libbip_a-lex.Po
##############################################
bip-0.9.0~rc4/src/Makefile.in-516-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
bip-0.9.0~rc4/src/Makefile.in:517:@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libbip_a_CFLAGS) $(CFLAGS) -c -o libbip_a-lex.obj `if test -f 'lex.c'; then $(CYGPATH_W) 'lex.c'; else $(CYGPATH_W) '$(srcdir)/lex.c'; fi`
bip-0.9.0~rc4/src/Makefile.in-518-
bip-0.9.0~rc4/src/Makefile.in-519-libbip_a-bip.o: bip.c
bip-0.9.0~rc4/src/Makefile.in:520:@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libbip_a_CFLAGS) $(CFLAGS) -MT libbip_a-bip.o -MD -MP -MF $(DEPDIR)/libbip_a-bip.Tpo -c -o libbip_a-bip.o `test -f 'bip.c' || echo '$(srcdir)/'`bip.c
bip-0.9.0~rc4/src/Makefile.in-521-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libbip_a-bip.Tpo $(DEPDIR)/libbip_a-bip.Po
##############################################
bip-0.9.0~rc4/src/Makefile.in-523-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
bip-0.9.0~rc4/src/Makefile.in:524:@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libbip_a_CFLAGS) $(CFLAGS) -c -o libbip_a-bip.o `test -f 'bip.c' || echo '$(srcdir)/'`bip.c
bip-0.9.0~rc4/src/Makefile.in-525-
bip-0.9.0~rc4/src/Makefile.in-526-libbip_a-bip.obj: bip.c
bip-0.9.0~rc4/src/Makefile.in:527:@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libbip_a_CFLAGS) $(CFLAGS) -MT libbip_a-bip.obj -MD -MP -MF $(DEPDIR)/libbip_a-bip.Tpo -c -o libbip_a-bip.obj `if test -f 'bip.c'; then $(CYGPATH_W) 'bip.c'; else $(CYGPATH_W) '$(srcdir)/bip.c'; fi`
bip-0.9.0~rc4/src/Makefile.in-528-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libbip_a-bip.Tpo $(DEPDIR)/libbip_a-bip.Po
##############################################
bip-0.9.0~rc4/src/Makefile.in-530-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
bip-0.9.0~rc4/src/Makefile.in:531:@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libbip_a_CFLAGS) $(CFLAGS) -c -o libbip_a-bip.obj `if test -f 'bip.c'; then $(CYGPATH_W) 'bip.c'; else $(CYGPATH_W) '$(srcdir)/bip.c'; fi`
bip-0.9.0~rc4/src/Makefile.in-532-
bip-0.9.0~rc4/src/Makefile.in-533-libbip_a-connection.o: connection.c
bip-0.9.0~rc4/src/Makefile.in:534:@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libbip_a_CFLAGS) $(CFLAGS) -MT libbip_a-connection.o -MD -MP -MF $(DEPDIR)/libbip_a-connection.Tpo -c -o libbip_a-connection.o `test -f 'connection.c' || echo '$(srcdir)/'`connection.c
bip-0.9.0~rc4/src/Makefile.in-535-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libbip_a-connection.Tpo $(DEPDIR)/libbip_a-connection.Po
##############################################
bip-0.9.0~rc4/src/Makefile.in-537-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
bip-0.9.0~rc4/src/Makefile.in:538:@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libbip_a_CFLAGS) $(CFLAGS) -c -o libbip_a-connection.o `test -f 'connection.c' || echo '$(srcdir)/'`connection.c
bip-0.9.0~rc4/src/Makefile.in-539-
bip-0.9.0~rc4/src/Makefile.in-540-libbip_a-connection.obj: connection.c
bip-0.9.0~rc4/src/Makefile.in:541:@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libbip_a_CFLAGS) $(CFLAGS) -MT libbip_a-connection.obj -MD -MP -MF $(DEPDIR)/libbip_a-connection.Tpo -c -o libbip_a-connection.obj `if test -f 'connection.c'; then $(CYGPATH_W) 'connection.c'; else $(CYGPATH_W) '$(srcdir)/connection.c'; fi`
bip-0.9.0~rc4/src/Makefile.in-542-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libbip_a-connection.Tpo $(DEPDIR)/libbip_a-connection.Po
##############################################
bip-0.9.0~rc4/src/Makefile.in-544-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
bip-0.9.0~rc4/src/Makefile.in:545:@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libbip_a_CFLAGS) $(CFLAGS) -c -o libbip_a-connection.obj `if test -f 'connection.c'; then $(CYGPATH_W) 'connection.c'; else $(CYGPATH_W) '$(srcdir)/connection.c'; fi`
bip-0.9.0~rc4/src/Makefile.in-546-
bip-0.9.0~rc4/src/Makefile.in-547-libbip_a-irc.o: irc.c
bip-0.9.0~rc4/src/Makefile.in:548:@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libbip_a_CFLAGS) $(CFLAGS) -MT libbip_a-irc.o -MD -MP -MF $(DEPDIR)/libbip_a-irc.Tpo -c -o libbip_a-irc.o `test -f 'irc.c' || echo '$(srcdir)/'`irc.c
bip-0.9.0~rc4/src/Makefile.in-549-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libbip_a-irc.Tpo $(DEPDIR)/libbip_a-irc.Po
##############################################
bip-0.9.0~rc4/src/Makefile.in-551-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
bip-0.9.0~rc4/src/Makefile.in:552:@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libbip_a_CFLAGS) $(CFLAGS) -c -o libbip_a-irc.o `test -f 'irc.c' || echo '$(srcdir)/'`irc.c
bip-0.9.0~rc4/src/Makefile.in-553-
bip-0.9.0~rc4/src/Makefile.in-554-libbip_a-irc.obj: irc.c
bip-0.9.0~rc4/src/Makefile.in:555:@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libbip_a_CFLAGS) $(CFLAGS) -MT libbip_a-irc.obj -MD -MP -MF $(DEPDIR)/libbip_a-irc.Tpo -c -o libbip_a-irc.obj `if test -f 'irc.c'; then $(CYGPATH_W) 'irc.c'; else $(CYGPATH_W) '$(srcdir)/irc.c'; fi`
bip-0.9.0~rc4/src/Makefile.in-556-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libbip_a-irc.Tpo $(DEPDIR)/libbip_a-irc.Po
##############################################
bip-0.9.0~rc4/src/Makefile.in-558-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
bip-0.9.0~rc4/src/Makefile.in:559:@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libbip_a_CFLAGS) $(CFLAGS) -c -o libbip_a-irc.obj `if test -f 'irc.c'; then $(CYGPATH_W) 'irc.c'; else $(CYGPATH_W) '$(srcdir)/irc.c'; fi`
bip-0.9.0~rc4/src/Makefile.in-560-
bip-0.9.0~rc4/src/Makefile.in-561-libbip_a-line.o: line.c
bip-0.9.0~rc4/src/Makefile.in:562:@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libbip_a_CFLAGS) $(CFLAGS) -MT libbip_a-line.o -MD -MP -MF $(DEPDIR)/libbip_a-line.Tpo -c -o libbip_a-line.o `test -f 'line.c' || echo '$(srcdir)/'`line.c
bip-0.9.0~rc4/src/Makefile.in-563-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libbip_a-line.Tpo $(DEPDIR)/libbip_a-line.Po
##############################################
bip-0.9.0~rc4/src/Makefile.in-565-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
bip-0.9.0~rc4/src/Makefile.in:566:@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libbip_a_CFLAGS) $(CFLAGS) -c -o libbip_a-line.o `test -f 'line.c' || echo '$(srcdir)/'`line.c
bip-0.9.0~rc4/src/Makefile.in-567-
bip-0.9.0~rc4/src/Makefile.in-568-libbip_a-line.obj: line.c
bip-0.9.0~rc4/src/Makefile.in:569:@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libbip_a_CFLAGS) $(CFLAGS) -MT libbip_a-line.obj -MD -MP -MF $(DEPDIR)/libbip_a-line.Tpo -c -o libbip_a-line.obj `if test -f 'line.c'; then $(CYGPATH_W) 'line.c'; else $(CYGPATH_W) '$(srcdir)/line.c'; fi`
bip-0.9.0~rc4/src/Makefile.in-570-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libbip_a-line.Tpo $(DEPDIR)/libbip_a-line.Po
##############################################
bip-0.9.0~rc4/src/Makefile.in-572-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
bip-0.9.0~rc4/src/Makefile.in:573:@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libbip_a_CFLAGS) $(CFLAGS) -c -o libbip_a-line.obj `if test -f 'line.c'; then $(CYGPATH_W) 'line.c'; else $(CYGPATH_W) '$(srcdir)/line.c'; fi`
bip-0.9.0~rc4/src/Makefile.in-574-
bip-0.9.0~rc4/src/Makefile.in-575-libbip_a-log.o: log.c
bip-0.9.0~rc4/src/Makefile.in:576:@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libbip_a_CFLAGS) $(CFLAGS) -MT libbip_a-log.o -MD -MP -MF $(DEPDIR)/libbip_a-log.Tpo -c -o libbip_a-log.o `test -f 'log.c' || echo '$(srcdir)/'`log.c
bip-0.9.0~rc4/src/Makefile.in-577-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libbip_a-log.Tpo $(DEPDIR)/libbip_a-log.Po
##############################################
bip-0.9.0~rc4/src/Makefile.in-579-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
bip-0.9.0~rc4/src/Makefile.in:580:@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libbip_a_CFLAGS) $(CFLAGS) -c -o libbip_a-log.o `test -f 'log.c' || echo '$(srcdir)/'`log.c
bip-0.9.0~rc4/src/Makefile.in-581-
bip-0.9.0~rc4/src/Makefile.in-582-libbip_a-log.obj: log.c
bip-0.9.0~rc4/src/Makefile.in:583:@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libbip_a_CFLAGS) $(CFLAGS) -MT libbip_a-log.obj -MD -MP -MF $(DEPDIR)/libbip_a-log.Tpo -c -o libbip_a-log.obj `if test -f 'log.c'; then $(CYGPATH_W) 'log.c'; else $(CYGPATH_W) '$(srcdir)/log.c'; fi`
bip-0.9.0~rc4/src/Makefile.in-584-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libbip_a-log.Tpo $(DEPDIR)/libbip_a-log.Po
##############################################
bip-0.9.0~rc4/src/Makefile.in-586-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
bip-0.9.0~rc4/src/Makefile.in:587:@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libbip_a_CFLAGS) $(CFLAGS) -c -o libbip_a-log.obj `if test -f 'log.c'; then $(CYGPATH_W) 'log.c'; else $(CYGPATH_W) '$(srcdir)/log.c'; fi`
bip-0.9.0~rc4/src/Makefile.in-588-
bip-0.9.0~rc4/src/Makefile.in-589-libbip_a-md5.o: md5.c
bip-0.9.0~rc4/src/Makefile.in:590:@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libbip_a_CFLAGS) $(CFLAGS) -MT libbip_a-md5.o -MD -MP -MF $(DEPDIR)/libbip_a-md5.Tpo -c -o libbip_a-md5.o `test -f 'md5.c' || echo '$(srcdir)/'`md5.c
bip-0.9.0~rc4/src/Makefile.in-591-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libbip_a-md5.Tpo $(DEPDIR)/libbip_a-md5.Po
##############################################
bip-0.9.0~rc4/src/Makefile.in-593-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
bip-0.9.0~rc4/src/Makefile.in:594:@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libbip_a_CFLAGS) $(CFLAGS) -c -o libbip_a-md5.o `test -f 'md5.c' || echo '$(srcdir)/'`md5.c
bip-0.9.0~rc4/src/Makefile.in-595-
bip-0.9.0~rc4/src/Makefile.in-596-libbip_a-md5.obj: md5.c
bip-0.9.0~rc4/src/Makefile.in:597:@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libbip_a_CFLAGS) $(CFLAGS) -MT libbip_a-md5.obj -MD -MP -MF $(DEPDIR)/libbip_a-md5.Tpo -c -o libbip_a-md5.obj `if test -f 'md5.c'; then $(CYGPATH_W) 'md5.c'; else $(CYGPATH_W) '$(srcdir)/md5.c'; fi`
bip-0.9.0~rc4/src/Makefile.in-598-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libbip_a-md5.Tpo $(DEPDIR)/libbip_a-md5.Po
##############################################
bip-0.9.0~rc4/src/Makefile.in-600-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
bip-0.9.0~rc4/src/Makefile.in:601:@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libbip_a_CFLAGS) $(CFLAGS) -c -o libbip_a-md5.obj `if test -f 'md5.c'; then $(CYGPATH_W) 'md5.c'; else $(CYGPATH_W) '$(srcdir)/md5.c'; fi`
bip-0.9.0~rc4/src/Makefile.in-602-
bip-0.9.0~rc4/src/Makefile.in-603-libbip_a-path_util.o: path_util.c
bip-0.9.0~rc4/src/Makefile.in:604:@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libbip_a_CFLAGS) $(CFLAGS) -MT libbip_a-path_util.o -MD -MP -MF $(DEPDIR)/libbip_a-path_util.Tpo -c -o libbip_a-path_util.o `test -f 'path_util.c' || echo '$(srcdir)/'`path_util.c
bip-0.9.0~rc4/src/Makefile.in-605-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libbip_a-path_util.Tpo $(DEPDIR)/libbip_a-path_util.Po
##############################################
bip-0.9.0~rc4/src/Makefile.in-607-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
bip-0.9.0~rc4/src/Makefile.in:608:@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libbip_a_CFLAGS) $(CFLAGS) -c -o libbip_a-path_util.o `test -f 'path_util.c' || echo '$(srcdir)/'`path_util.c
bip-0.9.0~rc4/src/Makefile.in-609-
bip-0.9.0~rc4/src/Makefile.in-610-libbip_a-path_util.obj: path_util.c
bip-0.9.0~rc4/src/Makefile.in:611:@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libbip_a_CFLAGS) $(CFLAGS) -MT libbip_a-path_util.obj -MD -MP -MF $(DEPDIR)/libbip_a-path_util.Tpo -c -o libbip_a-path_util.obj `if test -f 'path_util.c'; then $(CYGPATH_W) 'path_util.c'; else $(CYGPATH_W) '$(srcdir)/path_util.c'; fi`
bip-0.9.0~rc4/src/Makefile.in-612-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libbip_a-path_util.Tpo $(DEPDIR)/libbip_a-path_util.Po
##############################################
bip-0.9.0~rc4/src/Makefile.in-614-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
bip-0.9.0~rc4/src/Makefile.in:615:@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libbip_a_CFLAGS) $(CFLAGS) -c -o libbip_a-path_util.obj `if test -f 'path_util.c'; then $(CYGPATH_W) 'path_util.c'; else $(CYGPATH_W) '$(srcdir)/path_util.c'; fi`
bip-0.9.0~rc4/src/Makefile.in-616-
bip-0.9.0~rc4/src/Makefile.in-617-libbip_a-util.o: util.c
bip-0.9.0~rc4/src/Makefile.in:618:@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libbip_a_CFLAGS) $(CFLAGS) -MT libbip_a-util.o -MD -MP -MF $(DEPDIR)/libbip_a-util.Tpo -c -o libbip_a-util.o `test -f 'util.c' || echo '$(srcdir)/'`util.c
bip-0.9.0~rc4/src/Makefile.in-619-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libbip_a-util.Tpo $(DEPDIR)/libbip_a-util.Po
##############################################
bip-0.9.0~rc4/src/Makefile.in-621-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
bip-0.9.0~rc4/src/Makefile.in:622:@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libbip_a_CFLAGS) $(CFLAGS) -c -o libbip_a-util.o `test -f 'util.c' || echo '$(srcdir)/'`util.c
bip-0.9.0~rc4/src/Makefile.in-623-
bip-0.9.0~rc4/src/Makefile.in-624-libbip_a-util.obj: util.c
bip-0.9.0~rc4/src/Makefile.in:625:@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libbip_a_CFLAGS) $(CFLAGS) -MT libbip_a-util.obj -MD -MP -MF $(DEPDIR)/libbip_a-util.Tpo -c -o libbip_a-util.obj `if test -f 'util.c'; then $(CYGPATH_W) 'util.c'; else $(CYGPATH_W) '$(srcdir)/util.c'; fi`
bip-0.9.0~rc4/src/Makefile.in-626-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libbip_a-util.Tpo $(DEPDIR)/libbip_a-util.Po
##############################################
bip-0.9.0~rc4/src/Makefile.in-628-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
bip-0.9.0~rc4/src/Makefile.in:629:@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libbip_a_CFLAGS) $(CFLAGS) -c -o libbip_a-util.obj `if test -f 'util.c'; then $(CYGPATH_W) 'util.c'; else $(CYGPATH_W) '$(srcdir)/util.c'; fi`
bip-0.9.0~rc4/src/Makefile.in-630-
bip-0.9.0~rc4/src/Makefile.in-631-bip-bip_main.o: bip_main.c
bip-0.9.0~rc4/src/Makefile.in:632:@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(bip_CFLAGS) $(CFLAGS) -MT bip-bip_main.o -MD -MP -MF $(DEPDIR)/bip-bip_main.Tpo -c -o bip-bip_main.o `test -f 'bip_main.c' || echo '$(srcdir)/'`bip_main.c
bip-0.9.0~rc4/src/Makefile.in-633-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/bip-bip_main.Tpo $(DEPDIR)/bip-bip_main.Po
##############################################
bip-0.9.0~rc4/src/Makefile.in-635-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
bip-0.9.0~rc4/src/Makefile.in:636:@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(bip_CFLAGS) $(CFLAGS) -c -o bip-bip_main.o `test -f 'bip_main.c' || echo '$(srcdir)/'`bip_main.c
bip-0.9.0~rc4/src/Makefile.in-637-
bip-0.9.0~rc4/src/Makefile.in-638-bip-bip_main.obj: bip_main.c
bip-0.9.0~rc4/src/Makefile.in:639:@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(bip_CFLAGS) $(CFLAGS) -MT bip-bip_main.obj -MD -MP -MF $(DEPDIR)/bip-bip_main.Tpo -c -o bip-bip_main.obj `if test -f 'bip_main.c'; then $(CYGPATH_W) 'bip_main.c'; else $(CYGPATH_W) '$(srcdir)/bip_main.c'; fi`
bip-0.9.0~rc4/src/Makefile.in-640-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/bip-bip_main.Tpo $(DEPDIR)/bip-bip_main.Po
##############################################
bip-0.9.0~rc4/src/Makefile.in-642-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
bip-0.9.0~rc4/src/Makefile.in:643:@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(bip_CFLAGS) $(CFLAGS) -c -o bip-bip_main.obj `if test -f 'bip_main.c'; then $(CYGPATH_W) 'bip_main.c'; else $(CYGPATH_W) '$(srcdir)/bip_main.c'; fi`
bip-0.9.0~rc4/src/Makefile.in-644-
bip-0.9.0~rc4/src/Makefile.in-645-bipmkpw-bipmkpw.o: bipmkpw.c
bip-0.9.0~rc4/src/Makefile.in:646:@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(bipmkpw_CFLAGS) $(CFLAGS) -MT bipmkpw-bipmkpw.o -MD -MP -MF $(DEPDIR)/bipmkpw-bipmkpw.Tpo -c -o bipmkpw-bipmkpw.o `test -f 'bipmkpw.c' || echo '$(srcdir)/'`bipmkpw.c
bip-0.9.0~rc4/src/Makefile.in-647-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/bipmkpw-bipmkpw.Tpo $(DEPDIR)/bipmkpw-bipmkpw.Po
##############################################
bip-0.9.0~rc4/src/Makefile.in-649-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
bip-0.9.0~rc4/src/Makefile.in:650:@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(bipmkpw_CFLAGS) $(CFLAGS) -c -o bipmkpw-bipmkpw.o `test -f 'bipmkpw.c' || echo '$(srcdir)/'`bipmkpw.c
bip-0.9.0~rc4/src/Makefile.in-651-
bip-0.9.0~rc4/src/Makefile.in-652-bipmkpw-bipmkpw.obj: bipmkpw.c
bip-0.9.0~rc4/src/Makefile.in:653:@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(bipmkpw_CFLAGS) $(CFLAGS) -MT bipmkpw-bipmkpw.obj -MD -MP -MF $(DEPDIR)/bipmkpw-bipmkpw.Tpo -c -o bipmkpw-bipmkpw.obj `if test -f 'bipmkpw.c'; then $(CYGPATH_W) 'bipmkpw.c'; else $(CYGPATH_W) '$(srcdir)/bipmkpw.c'; fi`
bip-0.9.0~rc4/src/Makefile.in-654-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/bipmkpw-bipmkpw.Tpo $(DEPDIR)/bipmkpw-bipmkpw.Po
##############################################
bip-0.9.0~rc4/src/Makefile.in-656-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
bip-0.9.0~rc4/src/Makefile.in:657:@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(bipmkpw_CFLAGS) $(CFLAGS) -c -o bipmkpw-bipmkpw.obj `if test -f 'bipmkpw.c'; then $(CYGPATH_W) 'bipmkpw.c'; else $(CYGPATH_W) '$(srcdir)/bipmkpw.c'; fi`
bip-0.9.0~rc4/src/Makefile.in-658-
bip-0.9.0~rc4/src/Makefile.in-659-bipmkpw-md5.o: md5.c
bip-0.9.0~rc4/src/Makefile.in:660:@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(bipmkpw_CFLAGS) $(CFLAGS) -MT bipmkpw-md5.o -MD -MP -MF $(DEPDIR)/bipmkpw-md5.Tpo -c -o bipmkpw-md5.o `test -f 'md5.c' || echo '$(srcdir)/'`md5.c
bip-0.9.0~rc4/src/Makefile.in-661-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/bipmkpw-md5.Tpo $(DEPDIR)/bipmkpw-md5.Po
##############################################
bip-0.9.0~rc4/src/Makefile.in-663-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
bip-0.9.0~rc4/src/Makefile.in:664:@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(bipmkpw_CFLAGS) $(CFLAGS) -c -o bipmkpw-md5.o `test -f 'md5.c' || echo '$(srcdir)/'`md5.c
bip-0.9.0~rc4/src/Makefile.in-665-
bip-0.9.0~rc4/src/Makefile.in-666-bipmkpw-md5.obj: md5.c
bip-0.9.0~rc4/src/Makefile.in:667:@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(bipmkpw_CFLAGS) $(CFLAGS) -MT bipmkpw-md5.obj -MD -MP -MF $(DEPDIR)/bipmkpw-md5.Tpo -c -o bipmkpw-md5.obj `if test -f 'md5.c'; then $(CYGPATH_W) 'md5.c'; else $(CYGPATH_W) '$(srcdir)/md5.c'; fi`
bip-0.9.0~rc4/src/Makefile.in-668-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/bipmkpw-md5.Tpo $(DEPDIR)/bipmkpw-md5.Po
##############################################
bip-0.9.0~rc4/src/Makefile.in-670-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
bip-0.9.0~rc4/src/Makefile.in:671:@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(bipmkpw_CFLAGS) $(CFLAGS) -c -o bipmkpw-md5.obj `if test -f 'md5.c'; then $(CYGPATH_W) 'md5.c'; else $(CYGPATH_W) '$(srcdir)/md5.c'; fi`
bip-0.9.0~rc4/src/Makefile.in-672-
bip-0.9.0~rc4/src/Makefile.in-673-bipmkpw-util.o: util.c
bip-0.9.0~rc4/src/Makefile.in:674:@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(bipmkpw_CFLAGS) $(CFLAGS) -MT bipmkpw-util.o -MD -MP -MF $(DEPDIR)/bipmkpw-util.Tpo -c -o bipmkpw-util.o `test -f 'util.c' || echo '$(srcdir)/'`util.c
bip-0.9.0~rc4/src/Makefile.in-675-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/bipmkpw-util.Tpo $(DEPDIR)/bipmkpw-util.Po
##############################################
bip-0.9.0~rc4/src/Makefile.in-677-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
bip-0.9.0~rc4/src/Makefile.in:678:@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(bipmkpw_CFLAGS) $(CFLAGS) -c -o bipmkpw-util.o `test -f 'util.c' || echo '$(srcdir)/'`util.c
bip-0.9.0~rc4/src/Makefile.in-679-
bip-0.9.0~rc4/src/Makefile.in-680-bipmkpw-util.obj: util.c
bip-0.9.0~rc4/src/Makefile.in:681:@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(bipmkpw_CFLAGS) $(CFLAGS) -MT bipmkpw-util.obj -MD -MP -MF $(DEPDIR)/bipmkpw-util.Tpo -c -o bipmkpw-util.obj `if test -f 'util.c'; then $(CYGPATH_W) 'util.c'; else $(CYGPATH_W) '$(srcdir)/util.c'; fi`
bip-0.9.0~rc4/src/Makefile.in-682-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/bipmkpw-util.Tpo $(DEPDIR)/bipmkpw-util.Po
##############################################
bip-0.9.0~rc4/src/Makefile.in-684-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
bip-0.9.0~rc4/src/Makefile.in:685:@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(bipmkpw_CFLAGS) $(CFLAGS) -c -o bipmkpw-util.obj `if test -f 'util.c'; then $(CYGPATH_W) 'util.c'; else $(CYGPATH_W) '$(srcdir)/util.c'; fi`
bip-0.9.0~rc4/src/Makefile.in-686-
##############################################
bip-0.9.0~rc4/src/Makefile.in-690-.y.c:
bip-0.9.0~rc4/src/Makefile.in:691: $(AM_V_YACC)$(am__skipyacc) $(SHELL) $(YLWRAP) $< y.tab.c $@ y.tab.h `echo $@ | $(am__yacc_c2h)` y.output $*.output -- $(YACCCOMPILE)
bip-0.9.0~rc4/src/Makefile.in-692-
##############################################
bip-0.9.0~rc4/src/Makefile.in-722-GTAGS:
bip-0.9.0~rc4/src/Makefile.in:723: here=`$(am__cd) $(top_builddir) && pwd` \
bip-0.9.0~rc4/src/Makefile.in-724- && $(am__cd) $(top_srcdir) \
##############################################
bip-0.9.0~rc4/src/Makefile.in-748-distdir-am: $(DISTFILES)
bip-0.9.0~rc4/src/Makefile.in:749: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
bip-0.9.0~rc4/src/Makefile.in:750: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
bip-0.9.0~rc4/src/Makefile.in-751- list='$(DISTFILES)'; \
##############################################
bip-0.9.0~rc4/src/Makefile.in-762- if test -d $$d/$$file; then \
bip-0.9.0~rc4/src/Makefile.in:763: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
bip-0.9.0~rc4/src/Makefile.in-764- if test -d "$(distdir)/$$file"; then \
##############################################
bip-0.9.0~rc4/compile-67- mingw/*)
bip-0.9.0~rc4/compile:68: file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
bip-0.9.0~rc4/compile-69- ;;
bip-0.9.0~rc4/compile-70- cygwin/*)
bip-0.9.0~rc4/compile:71: file=`cygpath -m "$file" || echo "$file"`
bip-0.9.0~rc4/compile-72- ;;
bip-0.9.0~rc4/compile-73- wine/*)
bip-0.9.0~rc4/compile:74: file=`winepath -w "$file" || echo "$file"`
bip-0.9.0~rc4/compile-75- ;;
##############################################
bip-0.9.0~rc4/compile-310-# Name of file we expect compiler to create.
bip-0.9.0~rc4/compile:311:cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
bip-0.9.0~rc4/compile-312-
##############################################
bip-0.9.0~rc4/compile-316-# object file name, since that is what matters with a parallel build.
bip-0.9.0~rc4/compile:317:lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
bip-0.9.0~rc4/compile-318-while true; do
##############################################
bip-0.9.0~rc4/scripts/bipgenconfig-377- print("$text ? ");
bip-0.9.0~rc4/scripts/bipgenconfig:378: my $pass = `$bipmkpw`;
bip-0.9.0~rc4/scripts/bipgenconfig-379- chomp($pass);
##############################################
bip-0.9.0~rc4/scripts/bipgenconfig-433- if (!exists($cf{'global'}->{$d})) {
bip-0.9.0~rc4/scripts/bipgenconfig:434: return "You cannot define `$n' since `$d' isn't defined";
bip-0.9.0~rc4/scripts/bipgenconfig-435- }
##############################################
bip-0.9.0~rc4/scripts/bipgenconfig-437- $cf{'global'}->{$d} ne $v->{'depval'}) {
bip-0.9.0~rc4/scripts/bipgenconfig:438: return "You cannot define `$n' since `$d' isn't set to " .
bip-0.9.0~rc4/scripts/bipgenconfig-439- $v->{'depval'};
##############################################
bip-0.9.0~rc4/scripts/bipgenconfig-576-
bip-0.9.0~rc4/scripts/bipgenconfig:577: `openssl req -new -newkey rsa:4096 -x509 -days 365 -nodes -config "$tmpcrt" -out "$certout" -keyout "$certout"`;
bip-0.9.0~rc4/scripts/bipgenconfig-578- # TODO check command status
bip-0.9.0~rc4/scripts/bipgenconfig:579: `openssl x509 -subject -dates -fingerprint -noout -in "$certout"`;
bip-0.9.0~rc4/scripts/bipgenconfig-580- # TODO check command status