===========================================================
.___ __ __
_________________ __ __ __| _/|__|/ |_
/ ___\_` __ \__ \ | | \/ __ | | \\_ __\
/ /_/ > | \// __ \| | / /_/ | | || |
\___ /|__| (____ /____/\____ | |__||__|
/_____/ \/ \/
grep rough audit - static analysis tool
v2.8 written by @Wireghoul
=================================[justanotherhacker.com]===
codecrypt-1.8/m4/libtool.m4-119- done
codecrypt-1.8/m4/libtool.m4:120: func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
codecrypt-1.8/m4/libtool.m4-121-}
##############################################
codecrypt-1.8/m4/libtool.m4-437-m4_define([_LT_CONFIG_STATUS_DECLARE],
codecrypt-1.8/m4/libtool.m4:438:[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`'])
codecrypt-1.8/m4/libtool.m4-439-
##############################################
codecrypt-1.8/m4/libtool.m4-447-#
codecrypt-1.8/m4/libtool.m4:448:# <var>='`$ECHO "$<var>" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/m4/libtool.m4-449-m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
##############################################
codecrypt-1.8/m4/libtool.m4-557-]], lt_decl_quote_varnames); do
codecrypt-1.8/m4/libtool.m4:558: case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
codecrypt-1.8/m4/libtool.m4-559- *[[\\\\\\\`\\"\\\$]]*)
codecrypt-1.8/m4/libtool.m4:560: eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
codecrypt-1.8/m4/libtool.m4-561- ;;
##############################################
codecrypt-1.8/m4/libtool.m4-570-]], lt_decl_dquote_varnames); do
codecrypt-1.8/m4/libtool.m4:571: case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
codecrypt-1.8/m4/libtool.m4-572- *[[\\\\\\\`\\"\\\$]]*)
codecrypt-1.8/m4/libtool.m4:573: eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
codecrypt-1.8/m4/libtool.m4-574- ;;
##############################################
codecrypt-1.8/m4/libtool.m4-1111- if test yes = "$lt_cv_ld_force_load"; then
codecrypt-1.8/m4/libtool.m4:1112: _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
codecrypt-1.8/m4/libtool.m4-1113- m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes],
##############################################
codecrypt-1.8/m4/libtool.m4-1164- }]'
codecrypt-1.8/m4/libtool.m4:1165: _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
codecrypt-1.8/m4/libtool.m4-1166- # Check for a 64-bit object if we didn't find anything.
codecrypt-1.8/m4/libtool.m4-1167- if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
codecrypt-1.8/m4/libtool.m4:1168: _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
codecrypt-1.8/m4/libtool.m4-1169- fi],[])
##############################################
codecrypt-1.8/m4/libtool.m4-1200-if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
codecrypt-1.8/m4/libtool.m4:1201: test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
codecrypt-1.8/m4/libtool.m4-1202- ECHO='print -r --'
codecrypt-1.8/m4/libtool.m4:1203:elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
codecrypt-1.8/m4/libtool.m4-1204- ECHO='printf %s\n'
##############################################
codecrypt-1.8/m4/libtool.m4-1235- PATH=/empty FPATH=/empty; export PATH FPATH
codecrypt-1.8/m4/libtool.m4:1236: test "X`printf %s $ECHO`" = "X$ECHO" \
codecrypt-1.8/m4/libtool.m4:1237: || test "X`print -r -- $ECHO`" = "X$ECHO" )])])
codecrypt-1.8/m4/libtool.m4-1238-
##############################################
codecrypt-1.8/m4/libtool.m4-1259- if test yes = "$GCC"; then
codecrypt-1.8/m4/libtool.m4:1260: lt_sysroot=`$CC --print-sysroot 2>/dev/null`
codecrypt-1.8/m4/libtool.m4-1261- fi
##############################################
codecrypt-1.8/m4/libtool.m4-1263- /*)
codecrypt-1.8/m4/libtool.m4:1264: lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
codecrypt-1.8/m4/libtool.m4-1265- ;; #(
##############################################
codecrypt-1.8/m4/libtool.m4-1293- if AC_TRY_EVAL(ac_compile); then
codecrypt-1.8/m4/libtool.m4:1294: case `/usr/bin/file conftest.$ac_objext` in
codecrypt-1.8/m4/libtool.m4-1295- *ELF-32*)
##############################################
codecrypt-1.8/m4/libtool.m4-1310- if test yes = "$lt_cv_prog_gnu_ld"; then
codecrypt-1.8/m4/libtool.m4:1311: case `/usr/bin/file conftest.$ac_objext` in
codecrypt-1.8/m4/libtool.m4-1312- *32-bit*)
##############################################
codecrypt-1.8/m4/libtool.m4-1322- else
codecrypt-1.8/m4/libtool.m4:1323: case `/usr/bin/file conftest.$ac_objext` in
codecrypt-1.8/m4/libtool.m4-1324- *32-bit*)
##############################################
codecrypt-1.8/m4/libtool.m4-1344- emul=elf
codecrypt-1.8/m4/libtool.m4:1345: case `/usr/bin/file conftest.$ac_objext` in
codecrypt-1.8/m4/libtool.m4-1346- *32-bit*)
##############################################
codecrypt-1.8/m4/libtool.m4-1352- esac
codecrypt-1.8/m4/libtool.m4:1353: case `/usr/bin/file conftest.$ac_objext` in
codecrypt-1.8/m4/libtool.m4-1354- *MSB*)
##############################################
codecrypt-1.8/m4/libtool.m4-1360- esac
codecrypt-1.8/m4/libtool.m4:1361: case `/usr/bin/file conftest.$ac_objext` in
codecrypt-1.8/m4/libtool.m4-1362- *N32*)
##############################################
codecrypt-1.8/m4/libtool.m4-1725- # And add a safety zone
codecrypt-1.8/m4/libtool.m4:1726: lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
codecrypt-1.8/m4/libtool.m4:1727: lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
codecrypt-1.8/m4/libtool.m4-1728- ;;
##############################################
codecrypt-1.8/m4/libtool.m4-1758- if test -n "$kargmax"; then
codecrypt-1.8/m4/libtool.m4:1759: lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'`
codecrypt-1.8/m4/libtool.m4-1760- else
##############################################
codecrypt-1.8/m4/libtool.m4-1767- test undefined != "$lt_cv_sys_max_cmd_len"; then
codecrypt-1.8/m4/libtool.m4:1768: lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
codecrypt-1.8/m4/libtool.m4:1769: lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
codecrypt-1.8/m4/libtool.m4-1770- else
##############################################
codecrypt-1.8/m4/libtool.m4-1779- # we can't tell.
codecrypt-1.8/m4/libtool.m4:1780: while { test X`env echo "$teststring$teststring" 2>/dev/null` \
codecrypt-1.8/m4/libtool.m4-1781- = "X$teststring$teststring"; } >/dev/null 2>&1 &&
##############################################
codecrypt-1.8/m4/libtool.m4-1783- do
codecrypt-1.8/m4/libtool.m4:1784: i=`expr $i + 1`
codecrypt-1.8/m4/libtool.m4-1785- teststring=$teststring$teststring
##############################################
codecrypt-1.8/m4/libtool.m4-1787- # Only check the string length outside the loop.
codecrypt-1.8/m4/libtool.m4:1788: lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
codecrypt-1.8/m4/libtool.m4-1789- teststring=
##############################################
codecrypt-1.8/m4/libtool.m4-1792- # linker. It appears as though 1/2 is a usable value.
codecrypt-1.8/m4/libtool.m4:1793: lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
codecrypt-1.8/m4/libtool.m4-1794- fi
##############################################
codecrypt-1.8/m4/libtool.m4-2258- *:)
codecrypt-1.8/m4/libtool.m4:2259: eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'` \@S|@@S|@1\"
codecrypt-1.8/m4/libtool.m4-2260- ;;
codecrypt-1.8/m4/libtool.m4-2261- x:*)
codecrypt-1.8/m4/libtool.m4:2262: eval @S|@1=\"\@S|@@S|@1 `$ECHO @S|@2 | $SED 's/:/ /g'`\"
codecrypt-1.8/m4/libtool.m4-2263- ;;
codecrypt-1.8/m4/libtool.m4-2264- *::*)
codecrypt-1.8/m4/libtool.m4:2265: eval @S|@1=\"\@S|@@S|@1\ `$ECHO @S|@2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
codecrypt-1.8/m4/libtool.m4:2266: eval @S|@1=\"`$ECHO @S|@2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \@S|@@S|@1\"
codecrypt-1.8/m4/libtool.m4-2267- ;;
codecrypt-1.8/m4/libtool.m4-2268- *)
codecrypt-1.8/m4/libtool.m4:2269: eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'`\"
codecrypt-1.8/m4/libtool.m4-2270- ;;
##############################################
codecrypt-1.8/m4/libtool.m4-2298- esac
codecrypt-1.8/m4/libtool.m4:2299: lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
codecrypt-1.8/m4/libtool.m4-2300- case $lt_search_path_spec in
##############################################
codecrypt-1.8/m4/libtool.m4-2305- # okay in the real world where ";" in dirpaths is itself problematic.
codecrypt-1.8/m4/libtool.m4:2306: lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
codecrypt-1.8/m4/libtool.m4-2307- ;;
codecrypt-1.8/m4/libtool.m4-2308- *)
codecrypt-1.8/m4/libtool.m4:2309: lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
codecrypt-1.8/m4/libtool.m4-2310- ;;
##############################################
codecrypt-1.8/m4/libtool.m4-2314- lt_tmp_lt_search_path_spec=
codecrypt-1.8/m4/libtool.m4:2315: lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
codecrypt-1.8/m4/libtool.m4-2316- # ...but if some path component already ends with the multilib dir we assume
##############################################
codecrypt-1.8/m4/libtool.m4-2356- esac
codecrypt-1.8/m4/libtool.m4:2357: sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
codecrypt-1.8/m4/libtool.m4-2358-else
##############################################
codecrypt-1.8/m4/libtool.m4-2497- # Create ${libname}_ixlibrary.a entries in /sys/libs.
codecrypt-1.8/m4/libtool.m4:2498: finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
codecrypt-1.8/m4/libtool.m4-2499- ;;
##############################################
codecrypt-1.8/m4/libtool.m4-2533- # DLL is installed to $(libdir)/../bin by postinstall_cmds
codecrypt-1.8/m4/libtool.m4:2534: postinstall_cmds='base_file=`basename \$file`~
codecrypt-1.8/m4/libtool.m4:2535: dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
codecrypt-1.8/m4/libtool.m4:2536: dldir=$destdir/`dirname \$dlpath`~
codecrypt-1.8/m4/libtool.m4-2537- test -d \$dldir || mkdir -p \$dldir~
##############################################
codecrypt-1.8/m4/libtool.m4-2542- fi'
codecrypt-1.8/m4/libtool.m4:2543: postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
codecrypt-1.8/m4/libtool.m4-2544- dlpath=$dir/\$dldll~
##############################################
codecrypt-1.8/m4/libtool.m4-2550- # Cygwin DLLs use 'cyg' prefix rather than 'lib'
codecrypt-1.8/m4/libtool.m4:2551: soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
codecrypt-1.8/m4/libtool.m4-2552-m4_if([$1], [],[
##############################################
codecrypt-1.8/m4/libtool.m4-2556- # MinGW DLLs use traditional 'lib' prefix
codecrypt-1.8/m4/libtool.m4:2557: soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
codecrypt-1.8/m4/libtool.m4-2558- ;;
##############################################
codecrypt-1.8/m4/libtool.m4-2560- # pw32 DLLs use 'pw' prefix rather than 'lib'
codecrypt-1.8/m4/libtool.m4:2561: library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
codecrypt-1.8/m4/libtool.m4-2562- ;;
##############################################
codecrypt-1.8/m4/libtool.m4-2569- libname_spec='$name'
codecrypt-1.8/m4/libtool.m4:2570: soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
codecrypt-1.8/m4/libtool.m4-2571- library_names_spec='$libname.dll.lib'
##############################################
codecrypt-1.8/m4/libtool.m4-2581- # Let DOS variable expansion print the short 8.3 style file name.
codecrypt-1.8/m4/libtool.m4:2582: lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
codecrypt-1.8/m4/libtool.m4-2583- sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
##############################################
codecrypt-1.8/m4/libtool.m4-2586- # Convert to MSYS style.
codecrypt-1.8/m4/libtool.m4:2587: sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'`
codecrypt-1.8/m4/libtool.m4-2588- ;;
##############################################
codecrypt-1.8/m4/libtool.m4-2592- # like /cygdrive/c/PROGRA~1:/cygdr...
codecrypt-1.8/m4/libtool.m4:2593: sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
codecrypt-1.8/m4/libtool.m4:2594: sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
codecrypt-1.8/m4/libtool.m4:2595: sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
codecrypt-1.8/m4/libtool.m4-2596- ;;
##############################################
codecrypt-1.8/m4/libtool.m4-2600- # It is most probably a Windows format PATH.
codecrypt-1.8/m4/libtool.m4:2601: sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
codecrypt-1.8/m4/libtool.m4-2602- else
codecrypt-1.8/m4/libtool.m4:2603: sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
codecrypt-1.8/m4/libtool.m4-2604- fi
##############################################
codecrypt-1.8/m4/libtool.m4-2610- # DLL is installed to $(libdir)/../bin by postinstall_cmds
codecrypt-1.8/m4/libtool.m4:2611: postinstall_cmds='base_file=`basename \$file`~
codecrypt-1.8/m4/libtool.m4:2612: dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
codecrypt-1.8/m4/libtool.m4:2613: dldir=$destdir/`dirname \$dlpath`~
codecrypt-1.8/m4/libtool.m4-2614- test -d \$dldir || mkdir -p \$dldir~
codecrypt-1.8/m4/libtool.m4-2615- $install_prog $dir/$dlname \$dldir/$dlname'
codecrypt-1.8/m4/libtool.m4:2616: postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
codecrypt-1.8/m4/libtool.m4-2617- dlpath=$dir/\$dldll~
##############################################
codecrypt-1.8/m4/libtool.m4-2624- # Assume MSVC wrapper
codecrypt-1.8/m4/libtool.m4:2625: library_names_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext $libname.lib'
codecrypt-1.8/m4/libtool.m4-2626- dynamic_linker='Win32 ld.exe'
##############################################
codecrypt-1.8/m4/libtool.m4-2641- shlibpath_var=DYLD_LIBRARY_PATH
codecrypt-1.8/m4/libtool.m4:2642: shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
codecrypt-1.8/m4/libtool.m4-2643-m4_if([$1], [],[
##############################################
codecrypt-1.8/m4/libtool.m4-2875- if test -f /etc/ld.so.conf; then
codecrypt-1.8/m4/libtool.m4:2876: lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
codecrypt-1.8/m4/libtool.m4-2877- sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
##############################################
codecrypt-1.8/m4/libtool.m4-2941- need_lib_prefix=no
codecrypt-1.8/m4/libtool.m4:2942: if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
codecrypt-1.8/m4/libtool.m4-2943- need_version=no
##############################################
codecrypt-1.8/m4/libtool.m4-2968- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
codecrypt-1.8/m4/libtool.m4:2969: postinstall_cmds='base_file=`basename \$file`~
codecrypt-1.8/m4/libtool.m4:2970: dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~
codecrypt-1.8/m4/libtool.m4:2971: dldir=$destdir/`dirname \$dlpath`~
codecrypt-1.8/m4/libtool.m4-2972- test -d \$dldir || mkdir -p \$dldir~
##############################################
codecrypt-1.8/m4/libtool.m4-2977- fi'
codecrypt-1.8/m4/libtool.m4:2978: postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~
codecrypt-1.8/m4/libtool.m4-2979- dlpath=$dir/\$dldll~
##############################################
codecrypt-1.8/m4/libtool.m4-3188- "file_magic "*)
codecrypt-1.8/m4/libtool.m4:3189: file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
codecrypt-1.8/m4/libtool.m4-3190- MAGIC_CMD=$lt_cv_path_MAGIC_CMD
##############################################
codecrypt-1.8/m4/libtool.m4-3271- # gcc leaves a trailing carriage return, which upsets mingw
codecrypt-1.8/m4/libtool.m4:3272: ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
codecrypt-1.8/m4/libtool.m4-3273- *)
codecrypt-1.8/m4/libtool.m4:3274: ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
codecrypt-1.8/m4/libtool.m4-3275- esac
##############################################
codecrypt-1.8/m4/libtool.m4-3280- # Canonicalize the pathname of ld
codecrypt-1.8/m4/libtool.m4:3281: ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
codecrypt-1.8/m4/libtool.m4-3282- while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
codecrypt-1.8/m4/libtool.m4:3283: ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
codecrypt-1.8/m4/libtool.m4-3284- done
##############################################
codecrypt-1.8/m4/libtool.m4-3311- # Break only if it was the GNU/non-GNU ld that we prefer.
codecrypt-1.8/m4/libtool.m4:3312: case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
codecrypt-1.8/m4/libtool.m4-3313- *GNU* | *'with BFD'*)
##############################################
codecrypt-1.8/m4/libtool.m4-3351-[# I'd rather use --version here, but apparently some GNU lds only accept -v.
codecrypt-1.8/m4/libtool.m4:3352:case `$LD -v 2>&1 </dev/null` in
codecrypt-1.8/m4/libtool.m4-3353-*GNU* | *'with BFD'*)
##############################################
codecrypt-1.8/m4/libtool.m4-3578-openbsd* | bitrig*)
codecrypt-1.8/m4/libtool.m4:3579: if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
codecrypt-1.8/m4/libtool.m4-3580- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
##############################################
codecrypt-1.8/m4/libtool.m4-3645- else
codecrypt-1.8/m4/libtool.m4:3646: file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"`
codecrypt-1.8/m4/libtool.m4-3647- fi
##############################################
codecrypt-1.8/m4/libtool.m4-3696- esac
codecrypt-1.8/m4/libtool.m4:3697: case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in
codecrypt-1.8/m4/libtool.m4-3698- *$lt_bad_file* | *'Invalid file or object type'*)
##############################################
codecrypt-1.8/m4/libtool.m4-3702- *)
codecrypt-1.8/m4/libtool.m4:3703: case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
codecrypt-1.8/m4/libtool.m4-3704- */dev/null*)
##############################################
codecrypt-1.8/m4/libtool.m4-3728- AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :)
codecrypt-1.8/m4/libtool.m4:3729: case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in
codecrypt-1.8/m4/libtool.m4-3730- *COFF*)
##############################################
codecrypt-1.8/m4/libtool.m4-3787- # decide which one to use based on capabilities of $DLLTOOL
codecrypt-1.8/m4/libtool.m4:3788: case `$DLLTOOL --help 2>&1` in
codecrypt-1.8/m4/libtool.m4-3789- *--identify-strict*)
##############################################
codecrypt-1.8/m4/libtool.m4-3961-# If we're using GNU nm, then use its standard symbol codes.
codecrypt-1.8/m4/libtool.m4:3962:case `$NM -V 2>&1` in
codecrypt-1.8/m4/libtool.m4-3963-*GNU* | *'with BFD'*)
##############################################
codecrypt-1.8/m4/libtool.m4-4009-mingw*)
codecrypt-1.8/m4/libtool.m4:4010: opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
codecrypt-1.8/m4/libtool.m4-4011- ;;
##############################################
codecrypt-1.8/m4/libtool.m4-4065- nlist=conftest.nm
codecrypt-1.8/m4/libtool.m4:4066: if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then
codecrypt-1.8/m4/libtool.m4-4067- # Try sorting and uniquifying the output.
##############################################
codecrypt-1.8/m4/libtool.m4-4413- *)
codecrypt-1.8/m4/libtool.m4:4414: case `$CC -V 2>&1 | sed 5q` in
codecrypt-1.8/m4/libtool.m4-4415- *Sun\ C*)
##############################################
codecrypt-1.8/m4/libtool.m4-4749- *)
codecrypt-1.8/m4/libtool.m4:4750: case `$CC -V 2>&1 | sed 5q` in
codecrypt-1.8/m4/libtool.m4-4751- *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*)
##############################################
codecrypt-1.8/m4/libtool.m4-4932- else
codecrypt-1.8/m4/libtool.m4:4933: _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
codecrypt-1.8/m4/libtool.m4-4934- fi
##############################################
codecrypt-1.8/m4/libtool.m4-5031- # shared libraries, regardless of the interface used.
codecrypt-1.8/m4/libtool.m4:5032: case `$LD -v 2>&1` in
codecrypt-1.8/m4/libtool.m4-5033- *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
##############################################
codecrypt-1.8/m4/libtool.m4-5063- supports_anon_versioning=no
codecrypt-1.8/m4/libtool.m4:5064: case `$LD -v | $SED -e 's/([^)]\+)\s\+//' 2>&1` in
codecrypt-1.8/m4/libtool.m4-5065- *GNU\ gold*) supports_anon_versioning=yes ;;
##############################################
codecrypt-1.8/m4/libtool.m4-5166- prefix_cmds="$SED"~
codecrypt-1.8/m4/libtool.m4:5167: if test EXPORTS = "`$SED 1q $export_symbols`"; then
codecrypt-1.8/m4/libtool.m4-5168- prefix_cmds="$prefix_cmds -e 1d";
##############################################
codecrypt-1.8/m4/libtool.m4-5188- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
codecrypt-1.8/m4/libtool.m4:5189: _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
codecrypt-1.8/m4/libtool.m4:5190: _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
codecrypt-1.8/m4/libtool.m4-5191- ;;
##############################################
codecrypt-1.8/m4/libtool.m4-5206- pgcc*) # Portland Group C compiler
codecrypt-1.8/m4/libtool.m4:5207: _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
codecrypt-1.8/m4/libtool.m4-5208- tmp_addflag=' $pic_flag'
##############################################
codecrypt-1.8/m4/libtool.m4-5211- # Portland Group f77 and f90 compilers
codecrypt-1.8/m4/libtool.m4:5212: _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
codecrypt-1.8/m4/libtool.m4-5213- tmp_addflag=' $pic_flag -Mnomain' ;;
##############################################
codecrypt-1.8/m4/libtool.m4-5228- nvcc*) # Cuda Compiler Driver 2.2
codecrypt-1.8/m4/libtool.m4:5229: _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
codecrypt-1.8/m4/libtool.m4-5230- _LT_TAGVAR(compiler_needs_object, $1)=yes
##############################################
codecrypt-1.8/m4/libtool.m4-5232- esac
codecrypt-1.8/m4/libtool.m4:5233: case `$CC -V 2>&1 | sed 5q` in
codecrypt-1.8/m4/libtool.m4-5234- *Sun\ C*) # Sun C 5.9
codecrypt-1.8/m4/libtool.m4:5235: _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
codecrypt-1.8/m4/libtool.m4-5236- _LT_TAGVAR(compiler_needs_object, $1)=yes
##############################################
codecrypt-1.8/m4/libtool.m4-5303- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
codecrypt-1.8/m4/libtool.m4:5304: case `$LD -v 2>&1` in
codecrypt-1.8/m4/libtool.m4-5305- *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
##############################################
codecrypt-1.8/m4/libtool.m4-5392- else
codecrypt-1.8/m4/libtool.m4:5393: _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
codecrypt-1.8/m4/libtool.m4-5394- fi
##############################################
codecrypt-1.8/m4/libtool.m4-5457- # below for broken collect2 doesn't work under 4.3+
codecrypt-1.8/m4/libtool.m4:5458: collect2name=`$CC -print-prog-name=collect2`
codecrypt-1.8/m4/libtool.m4-5459- if test -f "$collect2name" &&
##############################################
codecrypt-1.8/m4/libtool.m4-5513- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
codecrypt-1.8/m4/libtool.m4:5514: _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
codecrypt-1.8/m4/libtool.m4-5515- else
##############################################
codecrypt-1.8/m4/libtool.m4-5538- # -brtl affects multiple linker settings, -berok does not and is overridden later
codecrypt-1.8/m4/libtool.m4:5539: compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`'
codecrypt-1.8/m4/libtool.m4-5540- if test svr4 != "$with_aix_soname"; then
##############################################
codecrypt-1.8/m4/libtool.m4-5629- # FIXME: Setting linknames here is a bad hack.
codecrypt-1.8/m4/libtool.m4:5630: _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
codecrypt-1.8/m4/libtool.m4-5631- # The linker will automatically build a .lib file if we build a DLL.
##############################################
codecrypt-1.8/m4/libtool.m4-5767- if test yes = "$GCC"; then
codecrypt-1.8/m4/libtool.m4:5768: _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
codecrypt-1.8/m4/libtool.m4-5769- # Try to use the -exported_symbol ld option, if it does not
##############################################
codecrypt-1.8/m4/libtool.m4-5790- if test yes = "$lt_cv_irix_exported_symbol"; then
codecrypt-1.8/m4/libtool.m4:5791: _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib'
codecrypt-1.8/m4/libtool.m4-5792- fi
##############################################
codecrypt-1.8/m4/libtool.m4-5794- else
codecrypt-1.8/m4/libtool.m4:5795: _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
codecrypt-1.8/m4/libtool.m4:5796: _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib'
codecrypt-1.8/m4/libtool.m4-5797- fi
##############################################
codecrypt-1.8/m4/libtool.m4-5841- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
codecrypt-1.8/m4/libtool.m4:5842: if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
codecrypt-1.8/m4/libtool.m4-5843- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
##############################################
codecrypt-1.8/m4/libtool.m4-5872- prefix_cmds="$SED"~
codecrypt-1.8/m4/libtool.m4:5873: if test EXPORTS = "`$SED 1q $export_symbols`"; then
codecrypt-1.8/m4/libtool.m4-5874- prefix_cmds="$prefix_cmds -e 1d";
##############################################
codecrypt-1.8/m4/libtool.m4-5886- _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
codecrypt-1.8/m4/libtool.m4:5887: _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
codecrypt-1.8/m4/libtool.m4-5888- else
codecrypt-1.8/m4/libtool.m4-5889- _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
codecrypt-1.8/m4/libtool.m4:5890: _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
codecrypt-1.8/m4/libtool.m4-5891- fi
##############################################
codecrypt-1.8/m4/libtool.m4-5899- _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
codecrypt-1.8/m4/libtool.m4:5900: _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
codecrypt-1.8/m4/libtool.m4-5901- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
##############################################
codecrypt-1.8/m4/libtool.m4-5903- _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
codecrypt-1.8/m4/libtool.m4:5904: _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
codecrypt-1.8/m4/libtool.m4:5905: _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
codecrypt-1.8/m4/libtool.m4:5906: $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp'
codecrypt-1.8/m4/libtool.m4-5907-
##############################################
codecrypt-1.8/m4/libtool.m4-5922- else
codecrypt-1.8/m4/libtool.m4:5923: case `$CC -V 2>&1` in
codecrypt-1.8/m4/libtool.m4-5924- *"Compilers 5.0"*)
##############################################
codecrypt-1.8/m4/libtool.m4-6115- _LT_TAGVAR(allow_undefined_flag, $1)=
codecrypt-1.8/m4/libtool.m4:6116: if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
codecrypt-1.8/m4/libtool.m4-6117- then
##############################################
codecrypt-1.8/m4/libtool.m4-6419- # ancient GNU ld didn't support --whole-archive et. al.
codecrypt-1.8/m4/libtool.m4:6420: if eval "`$CC -print-prog-name=ld` --help 2>&1" |
codecrypt-1.8/m4/libtool.m4-6421- $GREP 'no-whole-archive' > /dev/null; then
##############################################
codecrypt-1.8/m4/libtool.m4-6529- # below for broken collect2 doesn't work under 4.3+
codecrypt-1.8/m4/libtool.m4:6530: collect2name=`$CC -print-prog-name=collect2`
codecrypt-1.8/m4/libtool.m4-6531- if test -f "$collect2name" &&
##############################################
codecrypt-1.8/m4/libtool.m4-6587-
codecrypt-1.8/m4/libtool.m4:6588: _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
codecrypt-1.8/m4/libtool.m4-6589- else
##############################################
codecrypt-1.8/m4/libtool.m4-6612- # -brtl affects multiple linker settings, -berok does not and is overridden later
codecrypt-1.8/m4/libtool.m4:6613: compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`'
codecrypt-1.8/m4/libtool.m4-6614- if test svr4 != "$with_aix_soname"; then
##############################################
codecrypt-1.8/m4/libtool.m4-6741- prefix_cmds="$SED"~
codecrypt-1.8/m4/libtool.m4:6742: if test EXPORTS = "`$SED 1q $export_symbols`"; then
codecrypt-1.8/m4/libtool.m4-6743- prefix_cmds="$prefix_cmds -e 1d";
##############################################
codecrypt-1.8/m4/libtool.m4-6815- # dependencies.
codecrypt-1.8/m4/libtool.m4:6816: output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
codecrypt-1.8/m4/libtool.m4-6817- ;;
##############################################
codecrypt-1.8/m4/libtool.m4-6880- # dependencies.
codecrypt-1.8/m4/libtool.m4:6881: output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
codecrypt-1.8/m4/libtool.m4-6882- ;;
##############################################
codecrypt-1.8/m4/libtool.m4-6916- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
codecrypt-1.8/m4/libtool.m4:6917: _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
codecrypt-1.8/m4/libtool.m4:6918: _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
codecrypt-1.8/m4/libtool.m4-6919- ;;
##############################################
codecrypt-1.8/m4/libtool.m4-6923- # SGI C++
codecrypt-1.8/m4/libtool.m4:6924: _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
codecrypt-1.8/m4/libtool.m4-6925-
##############################################
codecrypt-1.8/m4/libtool.m4-6934- if test no = "$with_gnu_ld"; then
codecrypt-1.8/m4/libtool.m4:6935: _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
codecrypt-1.8/m4/libtool.m4-6936- else
codecrypt-1.8/m4/libtool.m4:6937: _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` -o $lib'
codecrypt-1.8/m4/libtool.m4-6938- fi
##############################################
codecrypt-1.8/m4/libtool.m4-6955- # to its proper name (with version) after linking.
codecrypt-1.8/m4/libtool.m4:6956: _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
codecrypt-1.8/m4/libtool.m4:6957: _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib $wl-retain-symbols-file,$export_symbols; mv \$templib $lib'
codecrypt-1.8/m4/libtool.m4-6958- # Commands to make compiler produce verbose output that lists
##############################################
codecrypt-1.8/m4/libtool.m4-6965- # dependencies.
codecrypt-1.8/m4/libtool.m4:6966: output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
codecrypt-1.8/m4/libtool.m4-6967-
##############################################
codecrypt-1.8/m4/libtool.m4-6980- # earlier do not add the objects themselves.
codecrypt-1.8/m4/libtool.m4:6981: case `$CC -V 2>&1` in
codecrypt-1.8/m4/libtool.m4-6982- *"Version 7."*)
##############################################
codecrypt-1.8/m4/libtool.m4-7001- # Portland Group C++ compiler
codecrypt-1.8/m4/libtool.m4:7002: case `$CC -V` in
codecrypt-1.8/m4/libtool.m4-7003- *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*)
##############################################
codecrypt-1.8/m4/libtool.m4-7006- $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
codecrypt-1.8/m4/libtool.m4:7007: compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
codecrypt-1.8/m4/libtool.m4-7008- _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
##############################################
codecrypt-1.8/m4/libtool.m4-7010- $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
codecrypt-1.8/m4/libtool.m4:7011: $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
codecrypt-1.8/m4/libtool.m4-7012- $RANLIB $oldlib'
##############################################
codecrypt-1.8/m4/libtool.m4-7015- $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
codecrypt-1.8/m4/libtool.m4:7016: $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
codecrypt-1.8/m4/libtool.m4-7017- _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
##############################################
codecrypt-1.8/m4/libtool.m4-7019- $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
codecrypt-1.8/m4/libtool.m4:7020: $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
codecrypt-1.8/m4/libtool.m4-7021- ;;
##############################################
codecrypt-1.8/m4/libtool.m4-7029- _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
codecrypt-1.8/m4/libtool.m4:7030: _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
codecrypt-1.8/m4/libtool.m4-7031- ;;
##############################################
codecrypt-1.8/m4/libtool.m4-7048- # dependencies.
codecrypt-1.8/m4/libtool.m4:7049: output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
codecrypt-1.8/m4/libtool.m4-7050- ;;
##############################################
codecrypt-1.8/m4/libtool.m4-7063- *)
codecrypt-1.8/m4/libtool.m4:7064: case `$CC -V 2>&1 | sed 5q` in
codecrypt-1.8/m4/libtool.m4-7065- *Sun\ C*)
##############################################
codecrypt-1.8/m4/libtool.m4-7070- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
codecrypt-1.8/m4/libtool.m4:7071: _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
codecrypt-1.8/m4/libtool.m4-7072- _LT_TAGVAR(compiler_needs_object, $1)=yes
##############################################
codecrypt-1.8/m4/libtool.m4-7135- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
codecrypt-1.8/m4/libtool.m4:7136: if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`"; then
codecrypt-1.8/m4/libtool.m4-7137- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file,$export_symbols -o $lib'
##############################################
codecrypt-1.8/m4/libtool.m4-7154- # to its proper name (with version) after linking.
codecrypt-1.8/m4/libtool.m4:7155: _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
codecrypt-1.8/m4/libtool.m4-7156-
##############################################
codecrypt-1.8/m4/libtool.m4-7175- _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
codecrypt-1.8/m4/libtool.m4:7176: _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $soname `test -n "$verstring" && func_echo_all "$wl-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
codecrypt-1.8/m4/libtool.m4-7177- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
##############################################
codecrypt-1.8/m4/libtool.m4-7180- _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
codecrypt-1.8/m4/libtool.m4:7181: _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
codecrypt-1.8/m4/libtool.m4:7182: _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
codecrypt-1.8/m4/libtool.m4-7183- echo "-hidden">> $lib.exp~
codecrypt-1.8/m4/libtool.m4:7184: $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname $wl-input $wl$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~
codecrypt-1.8/m4/libtool.m4-7185- $RM $lib.exp'
##############################################
codecrypt-1.8/m4/libtool.m4-7199- # dependencies.
codecrypt-1.8/m4/libtool.m4:7200: output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
codecrypt-1.8/m4/libtool.m4-7201- ;;
##############################################
codecrypt-1.8/m4/libtool.m4-7206- osf3*)
codecrypt-1.8/m4/libtool.m4:7207: _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
codecrypt-1.8/m4/libtool.m4-7208- ;;
codecrypt-1.8/m4/libtool.m4-7209- *)
codecrypt-1.8/m4/libtool.m4:7210: _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
codecrypt-1.8/m4/libtool.m4-7211- ;;
##############################################
codecrypt-1.8/m4/libtool.m4-7459- case @S|@2 in
codecrypt-1.8/m4/libtool.m4:7460: .*) func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%\\\\@S|@2\$%%"`;;
codecrypt-1.8/m4/libtool.m4:7461: *) func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%@S|@2\$%%"`;;
codecrypt-1.8/m4/libtool.m4-7462- esac
##############################################
codecrypt-1.8/m4/libtool.m4-7548-
codecrypt-1.8/m4/libtool.m4:7549: for p in `eval "$output_verbose_link_cmd"`; do
codecrypt-1.8/m4/libtool.m4-7550- case $prev$p in
##############################################
codecrypt-1.8/m4/libtool.m4-7652-if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
codecrypt-1.8/m4/libtool.m4:7653: _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | $SED -e 's! -L! !g' -e 's!^ !!'`
codecrypt-1.8/m4/libtool.m4-7654-fi
##############################################
codecrypt-1.8/m4/libtool.m4-8272- test 10 -lt "$lt_ac_count" && break
codecrypt-1.8/m4/libtool.m4:8273: lt_ac_count=`expr $lt_ac_count + 1`
codecrypt-1.8/m4/libtool.m4-8274- if test "$lt_ac_count" -gt "$lt_ac_max"; then
##############################################
codecrypt-1.8/m4/ltsugar.m4-68-m4_define([lt_combine],
codecrypt-1.8/m4/ltsugar.m4:69:[m4_if(m4_eval([$# > 3]), [1],
codecrypt-1.8/m4/ltsugar.m4-70- [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl
##############################################
codecrypt-1.8/configure-43-if test -z "$BASH_VERSION$ZSH_VERSION" \
codecrypt-1.8/configure:44: && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
codecrypt-1.8/configure-45- as_echo='print -r --'
codecrypt-1.8/configure-46- as_echo_n='print -rn --'
codecrypt-1.8/configure:47:elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
codecrypt-1.8/configure-48- as_echo='printf %s\n'
##############################################
codecrypt-1.8/configure-50-else
codecrypt-1.8/configure:51: if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
codecrypt-1.8/configure-52- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
##############################################
codecrypt-1.8/configure-60- expr "X$arg" : "X\\(.*\\)$as_nl";
codecrypt-1.8/configure:61: arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
codecrypt-1.8/configure-62- esac;
##############################################
codecrypt-1.8/configure-197- eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
codecrypt-1.8/configure:198: test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
codecrypt-1.8/configure-199-
##############################################
codecrypt-1.8/configure-204- PATH=/empty FPATH=/empty; export PATH FPATH
codecrypt-1.8/configure:205: test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\
codecrypt-1.8/configure:206: || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1
codecrypt-1.8/configure-207-test \$(( 1 + 1 )) = 2 || exit 1"
##############################################
codecrypt-1.8/configure-332- case $as_dir in #(
codecrypt-1.8/configure:333: *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
codecrypt-1.8/configure-334- *) as_qdir=$as_dir;;
##############################################
codecrypt-1.8/configure-405- {
codecrypt-1.8/configure:406: as_val=`expr "$@" || test $? -eq 1`
codecrypt-1.8/configure-407- }
##############################################
codecrypt-1.8/configure-412-# ----------------------------------------
codecrypt-1.8/configure:413:# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
codecrypt-1.8/configure-414-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
##############################################
codecrypt-1.8/configure-475- eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
codecrypt-1.8/configure:476: test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
codecrypt-1.8/configure-477- # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
##############################################
codecrypt-1.8/configure-857- case $ac_option in
codecrypt-1.8/configure:858: *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
codecrypt-1.8/configure-859- *=) ac_optarg= ;;
##############################################
codecrypt-1.8/configure-901- -disable-* | --disable-*)
codecrypt-1.8/configure:902: ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
codecrypt-1.8/configure-903- # Reject names that are not valid shell variable names.
##############################################
codecrypt-1.8/configure-906- ac_useropt_orig=$ac_useropt
codecrypt-1.8/configure:907: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
codecrypt-1.8/configure-908- case $ac_user_opts in
##############################################
codecrypt-1.8/configure-927- -enable-* | --enable-*)
codecrypt-1.8/configure:928: ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
codecrypt-1.8/configure-929- # Reject names that are not valid shell variable names.
##############################################
codecrypt-1.8/configure-932- ac_useropt_orig=$ac_useropt
codecrypt-1.8/configure:933: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
codecrypt-1.8/configure-934- case $ac_user_opts in
##############################################
codecrypt-1.8/configure-1140- -with-* | --with-*)
codecrypt-1.8/configure:1141: ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
codecrypt-1.8/configure-1142- # Reject names that are not valid shell variable names.
##############################################
codecrypt-1.8/configure-1145- ac_useropt_orig=$ac_useropt
codecrypt-1.8/configure:1146: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
codecrypt-1.8/configure-1147- case $ac_user_opts in
##############################################
codecrypt-1.8/configure-1156- -without-* | --without-*)
codecrypt-1.8/configure:1157: ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
codecrypt-1.8/configure-1158- # Reject names that are not valid shell variable names.
##############################################
codecrypt-1.8/configure-1161- ac_useropt_orig=$ac_useropt
codecrypt-1.8/configure:1162: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
codecrypt-1.8/configure-1163- case $ac_user_opts in
##############################################
codecrypt-1.8/configure-1194- *=*)
codecrypt-1.8/configure:1195: ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
codecrypt-1.8/configure-1196- # Reject names that are not valid shell variable names.
##############################################
codecrypt-1.8/configure-1215-if test -n "$ac_prev"; then
codecrypt-1.8/configure:1216: ac_option=--`echo $ac_prev | sed 's/_/-/g'`
codecrypt-1.8/configure-1217- as_fn_error $? "missing argument to $ac_option"
##############################################
codecrypt-1.8/configure-1237- */ )
codecrypt-1.8/configure:1238: ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
codecrypt-1.8/configure-1239- eval $ac_var=\$ac_val;;
##############################################
codecrypt-1.8/configure-1272-ac_ls_di=`ls -di .` &&
codecrypt-1.8/configure:1273:ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
codecrypt-1.8/configure-1274- as_fn_error $? "working directory cannot be determined"
##############################################
codecrypt-1.8/configure-1328-case $srcdir in
codecrypt-1.8/configure:1329:*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
codecrypt-1.8/configure-1330-esac
##############################################
codecrypt-1.8/configure-1371-By default, \`make install' will install all the files in
codecrypt-1.8/configure:1372:\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
codecrypt-1.8/configure:1373:an installation prefix other than \`$ac_default_prefix' using \`--prefix',
codecrypt-1.8/configure-1374-for instance \`--prefix=\$HOME'.
##############################################
codecrypt-1.8/configure-1491-*)
codecrypt-1.8/configure:1492: ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
codecrypt-1.8/configure-1493- # A ".." for each directory in $ac_dir_suffix.
codecrypt-1.8/configure:1494: ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
codecrypt-1.8/configure-1495- case $ac_top_builddir_sub in
##############################################
codecrypt-1.8/configure-2291- *\'*)
codecrypt-1.8/configure:2292: ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
codecrypt-1.8/configure-2293- esac
##############################################
codecrypt-1.8/configure-2374- case $ac_val in
codecrypt-1.8/configure:2375: *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
codecrypt-1.8/configure-2376- esac
##############################################
codecrypt-1.8/configure-2389- case $ac_val in
codecrypt-1.8/configure:2390: *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
codecrypt-1.8/configure-2391- esac
##############################################
codecrypt-1.8/configure-2509- set,)
codecrypt-1.8/configure:2510: { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
codecrypt-1.8/configure:2511:$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
codecrypt-1.8/configure-2512- ac_cache_corrupted=: ;;
##############################################
codecrypt-1.8/configure-2520- # differences in whitespace do not lead to failure.
codecrypt-1.8/configure:2521: ac_old_val_w=`echo x $ac_old_val`
codecrypt-1.8/configure:2522: ac_new_val_w=`echo x $ac_new_val`
codecrypt-1.8/configure-2523- if test "$ac_old_val_w" != "$ac_new_val_w"; then
##############################################
codecrypt-1.8/configure-2540- case $ac_new_val in
codecrypt-1.8/configure:2541: *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
codecrypt-1.8/configure-2542- *) ac_arg=$ac_var=$ac_new_val ;;
##############################################
codecrypt-1.8/configure-2717- echo "timestamp, slept: $am_has_slept" > conftest.file
codecrypt-1.8/configure:2718: set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
codecrypt-1.8/configure-2719- if test "$*" = "X"; then
codecrypt-1.8/configure-2720- # -L didn't work.
codecrypt-1.8/configure:2721: set X `ls -t "$srcdir/configure" conftest.file`
codecrypt-1.8/configure-2722- fi
##############################################
codecrypt-1.8/configure-2768-ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
codecrypt-1.8/configure:2769:program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
codecrypt-1.8/configure-2770-
codecrypt-1.8/configure-2771-# Expand $ac_aux_dir to an absolute path.
codecrypt-1.8/configure:2772:am_aux_dir=`cd "$ac_aux_dir" && pwd`
codecrypt-1.8/configure-2773-
##############################################
codecrypt-1.8/configure-2913- as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue
codecrypt-1.8/configure:2914: case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
codecrypt-1.8/configure-2915- 'mkdir (GNU coreutils) '* | \
##############################################
codecrypt-1.8/configure-2986-set x ${MAKE-make}
codecrypt-1.8/configure:2987:ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
codecrypt-1.8/configure-2988-if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
##############################################
codecrypt-1.8/configure-2996-# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
codecrypt-1.8/configure:2997:case `${MAKE-make} -f conftest.make 2>/dev/null` in
codecrypt-1.8/configure-2998- *@@@%%%=?*=@@@%%%*)
##############################################
codecrypt-1.8/configure-3062-
codecrypt-1.8/configure:3063:if test "`cd $srcdir && pwd`" != "`pwd`"; then
codecrypt-1.8/configure-3064- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
##############################################
codecrypt-1.8/configure-3257-test "x$ac_build_alias" = x &&
codecrypt-1.8/configure:3258: ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
codecrypt-1.8/configure-3259-test "x$ac_build_alias" = x &&
codecrypt-1.8/configure-3260- as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
codecrypt-1.8/configure:3261:ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
codecrypt-1.8/configure-3262- as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
##############################################
codecrypt-1.8/configure-3281-IFS=$ac_save_IFS
codecrypt-1.8/configure:3282:case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
codecrypt-1.8/configure-3283-
##############################################
codecrypt-1.8/configure-3292-else
codecrypt-1.8/configure:3293: ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
codecrypt-1.8/configure-3294- as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
##############################################
codecrypt-1.8/configure-3314-IFS=$ac_save_IFS
codecrypt-1.8/configure:3315:case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
codecrypt-1.8/configure-3316-
##############################################
codecrypt-1.8/configure-3342-if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
codecrypt-1.8/configure:3343: test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
codecrypt-1.8/configure-3344- ECHO='print -r --'
codecrypt-1.8/configure:3345:elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
codecrypt-1.8/configure-3346- ECHO='printf %s\n'
##############################################
codecrypt-1.8/configure-3406-# Ignore all kinds of additional output from 'make'.
codecrypt-1.8/configure:3407:case `$am_make -s -f confmf 2> /dev/null` in #(
codecrypt-1.8/configure-3408-*the\ am__doit\ target*)
##############################################
codecrypt-1.8/configure-3416- echo '.include "confinc"' > confmf
codecrypt-1.8/configure:3417: case `$am_make -s -f confmf 2> /dev/null` in #(
codecrypt-1.8/configure-3418- *the\ am__doit\ target*)
##############################################
codecrypt-1.8/configure-3795-$as_echo_n "checking whether the C compiler works... " >&6; }
codecrypt-1.8/configure:3796:ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
codecrypt-1.8/configure-3797-
##############################################
codecrypt-1.8/configure-3839- then :; else
codecrypt-1.8/configure:3840: ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
codecrypt-1.8/configure-3841- fi
##############################################
codecrypt-1.8/configure-3899- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
codecrypt-1.8/configure:3900: *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
codecrypt-1.8/configure-3901- break;;
##############################################
codecrypt-1.8/configure-4008- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
codecrypt-1.8/configure:4009: *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
codecrypt-1.8/configure-4010- break;;
##############################################
codecrypt-1.8/configure-4326- if test "$am_compiler_list" = ""; then
codecrypt-1.8/configure:4327: am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
codecrypt-1.8/configure-4328- fi
##############################################
codecrypt-1.8/configure-4450- # Check for GNU $ac_path_SED
codecrypt-1.8/configure:4451:case `"$ac_path_SED" --version 2>&1` in
codecrypt-1.8/configure-4452-*GNU*)
##############################################
codecrypt-1.8/configure-4526- # Check for GNU $ac_path_GREP
codecrypt-1.8/configure:4527:case `"$ac_path_GREP" --version 2>&1` in
codecrypt-1.8/configure-4528-*GNU*)
##############################################
codecrypt-1.8/configure-4592- # Check for GNU $ac_path_EGREP
codecrypt-1.8/configure:4593:case `"$ac_path_EGREP" --version 2>&1` in
codecrypt-1.8/configure-4594-*GNU*)
##############################################
codecrypt-1.8/configure-4659- # Check for GNU $ac_path_FGREP
codecrypt-1.8/configure:4660:case `"$ac_path_FGREP" --version 2>&1` in
codecrypt-1.8/configure-4661-*GNU*)
##############################################
codecrypt-1.8/configure-4739- # gcc leaves a trailing carriage return, which upsets mingw
codecrypt-1.8/configure:4740: ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
codecrypt-1.8/configure-4741- *)
codecrypt-1.8/configure:4742: ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
codecrypt-1.8/configure-4743- esac
##############################################
codecrypt-1.8/configure-4748- # Canonicalize the pathname of ld
codecrypt-1.8/configure:4749: ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
codecrypt-1.8/configure-4750- while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
codecrypt-1.8/configure:4751: ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
codecrypt-1.8/configure-4752- done
##############################################
codecrypt-1.8/configure-4783- # Break only if it was the GNU/non-GNU ld that we prefer.
codecrypt-1.8/configure:4784: case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
codecrypt-1.8/configure-4785- *GNU* | *'with BFD'*)
##############################################
codecrypt-1.8/configure-4814- # I'd rather use --version here, but apparently some GNU lds only accept -v.
codecrypt-1.8/configure:4815:case `$LD -v 2>&1 </dev/null` in
codecrypt-1.8/configure-4816-*GNU* | *'with BFD'*)
##############################################
codecrypt-1.8/configure-4864- esac
codecrypt-1.8/configure:4865: case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in
codecrypt-1.8/configure-4866- *$lt_bad_file* | *'Invalid file or object type'*)
##############################################
codecrypt-1.8/configure-4870- *)
codecrypt-1.8/configure:4871: case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
codecrypt-1.8/configure-4872- */dev/null*)
##############################################
codecrypt-1.8/configure-4998-
codecrypt-1.8/configure:4999: case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in
codecrypt-1.8/configure-5000- *COFF*)
##############################################
codecrypt-1.8/configure-5110- # And add a safety zone
codecrypt-1.8/configure:5111: lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
codecrypt-1.8/configure:5112: lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
codecrypt-1.8/configure-5113- ;;
##############################################
codecrypt-1.8/configure-5143- if test -n "$kargmax"; then
codecrypt-1.8/configure:5144: lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'`
codecrypt-1.8/configure-5145- else
##############################################
codecrypt-1.8/configure-5152- test undefined != "$lt_cv_sys_max_cmd_len"; then
codecrypt-1.8/configure:5153: lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
codecrypt-1.8/configure:5154: lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
codecrypt-1.8/configure-5155- else
##############################################
codecrypt-1.8/configure-5164- # we can't tell.
codecrypt-1.8/configure:5165: while { test X`env echo "$teststring$teststring" 2>/dev/null` \
codecrypt-1.8/configure-5166- = "X$teststring$teststring"; } >/dev/null 2>&1 &&
##############################################
codecrypt-1.8/configure-5168- do
codecrypt-1.8/configure:5169: i=`expr $i + 1`
codecrypt-1.8/configure-5170- teststring=$teststring$teststring
##############################################
codecrypt-1.8/configure-5172- # Only check the string length outside the loop.
codecrypt-1.8/configure:5173: lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
codecrypt-1.8/configure-5174- teststring=
##############################################
codecrypt-1.8/configure-5177- # linker. It appears as though 1/2 is a usable value.
codecrypt-1.8/configure:5178: lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
codecrypt-1.8/configure-5179- fi
##############################################
codecrypt-1.8/configure-5588-openbsd* | bitrig*)
codecrypt-1.8/configure:5589: if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
codecrypt-1.8/configure-5590- lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
##############################################
codecrypt-1.8/configure-5658- else
codecrypt-1.8/configure:5659: file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"`
codecrypt-1.8/configure-5660- fi
##############################################
codecrypt-1.8/configure-5803- # decide which one to use based on capabilities of $DLLTOOL
codecrypt-1.8/configure:5804: case `$DLLTOOL --help 2>&1` in
codecrypt-1.8/configure-5805- *--identify-strict*)
##############################################
codecrypt-1.8/configure-6325-# If we're using GNU nm, then use its standard symbol codes.
codecrypt-1.8/configure:6326:case `$NM -V 2>&1` in
codecrypt-1.8/configure-6327-*GNU* | *'with BFD'*)
##############################################
codecrypt-1.8/configure-6373-mingw*)
codecrypt-1.8/configure:6374: opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
codecrypt-1.8/configure-6375- ;;
##############################################
codecrypt-1.8/configure-6605- if test yes = "$GCC"; then
codecrypt-1.8/configure:6606: lt_sysroot=`$CC --print-sysroot 2>/dev/null`
codecrypt-1.8/configure-6607- fi
##############################################
codecrypt-1.8/configure-6609- /*)
codecrypt-1.8/configure:6610: lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
codecrypt-1.8/configure-6611- ;; #(
##############################################
codecrypt-1.8/configure-6704- done
codecrypt-1.8/configure:6705: func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
codecrypt-1.8/configure-6706-}
##############################################
codecrypt-1.8/configure-6726- test $ac_status = 0; }; then
codecrypt-1.8/configure:6727: case `/usr/bin/file conftest.$ac_objext` in
codecrypt-1.8/configure-6728- *ELF-32*)
##############################################
codecrypt-1.8/configure-6747- if test yes = "$lt_cv_prog_gnu_ld"; then
codecrypt-1.8/configure:6748: case `/usr/bin/file conftest.$ac_objext` in
codecrypt-1.8/configure-6749- *32-bit*)
##############################################
codecrypt-1.8/configure-6759- else
codecrypt-1.8/configure:6760: case `/usr/bin/file conftest.$ac_objext` in
codecrypt-1.8/configure-6761- *32-bit*)
##############################################
codecrypt-1.8/configure-6785- emul=elf
codecrypt-1.8/configure:6786: case `/usr/bin/file conftest.$ac_objext` in
codecrypt-1.8/configure-6787- *32-bit*)
##############################################
codecrypt-1.8/configure-6793- esac
codecrypt-1.8/configure:6794: case `/usr/bin/file conftest.$ac_objext` in
codecrypt-1.8/configure-6795- *MSB*)
##############################################
codecrypt-1.8/configure-6801- esac
codecrypt-1.8/configure:6802: case `/usr/bin/file conftest.$ac_objext` in
codecrypt-1.8/configure-6803- *N32*)
##############################################
codecrypt-1.8/configure-7734- *:)
codecrypt-1.8/configure:7735: eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\"
codecrypt-1.8/configure-7736- ;;
codecrypt-1.8/configure-7737- x:*)
codecrypt-1.8/configure:7738: eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\"
codecrypt-1.8/configure-7739- ;;
codecrypt-1.8/configure-7740- *::*)
codecrypt-1.8/configure:7741: eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
codecrypt-1.8/configure:7742: eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\"
codecrypt-1.8/configure-7743- ;;
codecrypt-1.8/configure-7744- *)
codecrypt-1.8/configure:7745: eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\"
codecrypt-1.8/configure-7746- ;;
##############################################
codecrypt-1.8/configure-8003-do :
codecrypt-1.8/configure:8004: as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
codecrypt-1.8/configure-8005-ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
##############################################
codecrypt-1.8/configure-8008- cat >>confdefs.h <<_ACEOF
codecrypt-1.8/configure:8009:#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
codecrypt-1.8/configure-8010-_ACEOF
##############################################
codecrypt-1.8/configure-8366- "file_magic "*)
codecrypt-1.8/configure:8367: file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
codecrypt-1.8/configure-8368- MAGIC_CMD=$lt_cv_path_MAGIC_CMD
##############################################
codecrypt-1.8/configure-8432- "file_magic "*)
codecrypt-1.8/configure:8433: file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
codecrypt-1.8/configure-8434- MAGIC_CMD=$lt_cv_path_MAGIC_CMD
##############################################
codecrypt-1.8/configure-8830- *)
codecrypt-1.8/configure:8831: case `$CC -V 2>&1 | sed 5q` in
codecrypt-1.8/configure-8832- *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*)
##############################################
codecrypt-1.8/configure-9279- # shared libraries, regardless of the interface used.
codecrypt-1.8/configure:9280: case `$LD -v 2>&1` in
codecrypt-1.8/configure-9281- *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
##############################################
codecrypt-1.8/configure-9311- supports_anon_versioning=no
codecrypt-1.8/configure:9312: case `$LD -v | $SED -e 's/(^)\+)\s\+//' 2>&1` in
codecrypt-1.8/configure-9313- *GNU\ gold*) supports_anon_versioning=yes ;;
##############################################
codecrypt-1.8/configure-9380- # is; otherwise, prepend EXPORTS...
codecrypt-1.8/configure:9381: archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then
codecrypt-1.8/configure-9382- cp $export_symbols $output_objdir/$soname.def;
##############################################
codecrypt-1.8/configure-9414- prefix_cmds="$SED"~
codecrypt-1.8/configure:9415: if test EXPORTS = "`$SED 1q $export_symbols`"; then
codecrypt-1.8/configure-9416- prefix_cmds="$prefix_cmds -e 1d";
##############################################
codecrypt-1.8/configure-9436- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
codecrypt-1.8/configure:9437: archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
codecrypt-1.8/configure:9438: archive_expsym_cmds='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
codecrypt-1.8/configure-9439- ;;
##############################################
codecrypt-1.8/configure-9454- pgcc*) # Portland Group C compiler
codecrypt-1.8/configure:9455: whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
codecrypt-1.8/configure-9456- tmp_addflag=' $pic_flag'
##############################################
codecrypt-1.8/configure-9459- # Portland Group f77 and f90 compilers
codecrypt-1.8/configure:9460: whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
codecrypt-1.8/configure-9461- tmp_addflag=' $pic_flag -Mnomain' ;;
##############################################
codecrypt-1.8/configure-9476- nvcc*) # Cuda Compiler Driver 2.2
codecrypt-1.8/configure:9477: whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
codecrypt-1.8/configure-9478- compiler_needs_object=yes
##############################################
codecrypt-1.8/configure-9480- esac
codecrypt-1.8/configure:9481: case `$CC -V 2>&1 | sed 5q` in
codecrypt-1.8/configure-9482- *Sun\ C*) # Sun C 5.9
codecrypt-1.8/configure:9483: whole_archive_flag_spec='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
codecrypt-1.8/configure-9484- compiler_needs_object=yes
##############################################
codecrypt-1.8/configure-9551- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
codecrypt-1.8/configure:9552: case `$LD -v 2>&1` in
codecrypt-1.8/configure-9553- *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
##############################################
codecrypt-1.8/configure-9640- else
codecrypt-1.8/configure:9641: export_symbols_cmds='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
codecrypt-1.8/configure-9642- fi
##############################################
codecrypt-1.8/configure-9705- # below for broken collect2 doesn't work under 4.3+
codecrypt-1.8/configure:9706: collect2name=`$CC -print-prog-name=collect2`
codecrypt-1.8/configure-9707- if test -f "$collect2name" &&
##############################################
codecrypt-1.8/configure-9785- }'
codecrypt-1.8/configure:9786: lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
codecrypt-1.8/configure-9787- # Check for a 64-bit object if we didn't find anything.
codecrypt-1.8/configure-9788- if test -z "$lt_cv_aix_libpath_"; then
codecrypt-1.8/configure:9789: lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
codecrypt-1.8/configure-9790- fi
##############################################
codecrypt-1.8/configure-9803- hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath"
codecrypt-1.8/configure:9804: archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
codecrypt-1.8/configure-9805- else
##############################################
codecrypt-1.8/configure-9838- }'
codecrypt-1.8/configure:9839: lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
codecrypt-1.8/configure-9840- # Check for a 64-bit object if we didn't find anything.
codecrypt-1.8/configure-9841- if test -z "$lt_cv_aix_libpath_"; then
codecrypt-1.8/configure:9842: lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
codecrypt-1.8/configure-9843- fi
##############################################
codecrypt-1.8/configure-9870- # -brtl affects multiple linker settings, -berok does not and is overridden later
codecrypt-1.8/configure:9871: compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([, ]\\)%-berok\\1%g"`'
codecrypt-1.8/configure-9872- if test svr4 != "$with_aix_soname"; then
##############################################
codecrypt-1.8/configure-9923- archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
codecrypt-1.8/configure:9924: archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then
codecrypt-1.8/configure-9925- cp "$export_symbols" "$output_objdir/$soname.def";
##############################################
codecrypt-1.8/configure-9961- # FIXME: Setting linknames here is a bad hack.
codecrypt-1.8/configure:9962: archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
codecrypt-1.8/configure-9963- # The linker will automatically build a .lib file if we build a DLL.
##############################################
codecrypt-1.8/configure-9979- if test yes = "$lt_cv_ld_force_load"; then
codecrypt-1.8/configure:9980: whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
codecrypt-1.8/configure-9981-
##############################################
codecrypt-1.8/configure-10159- if test yes = "$GCC"; then
codecrypt-1.8/configure:10160: archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
codecrypt-1.8/configure-10161- # Try to use the -exported_symbol ld option, if it does not
##############################################
codecrypt-1.8/configure-10187- if test yes = "$lt_cv_irix_exported_symbol"; then
codecrypt-1.8/configure:10188: archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib'
codecrypt-1.8/configure-10189- fi
##############################################
codecrypt-1.8/configure-10191- else
codecrypt-1.8/configure:10192: archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
codecrypt-1.8/configure:10193: archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib'
codecrypt-1.8/configure-10194- fi
##############################################
codecrypt-1.8/configure-10238- hardcode_direct_absolute=yes
codecrypt-1.8/configure:10239: if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
codecrypt-1.8/configure-10240- archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
##############################################
codecrypt-1.8/configure-10269- prefix_cmds="$SED"~
codecrypt-1.8/configure:10270: if test EXPORTS = "`$SED 1q $export_symbols`"; then
codecrypt-1.8/configure-10271- prefix_cmds="$prefix_cmds -e 1d";
##############################################
codecrypt-1.8/configure-10283- allow_undefined_flag=' $wl-expect_unresolved $wl\*'
codecrypt-1.8/configure:10284: archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
codecrypt-1.8/configure-10285- else
codecrypt-1.8/configure-10286- allow_undefined_flag=' -expect_unresolved \*'
codecrypt-1.8/configure:10287: archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
codecrypt-1.8/configure-10288- fi
##############################################
codecrypt-1.8/configure-10296- allow_undefined_flag=' $wl-expect_unresolved $wl\*'
codecrypt-1.8/configure:10297: archive_cmds='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
codecrypt-1.8/configure-10298- hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
##############################################
codecrypt-1.8/configure-10300- allow_undefined_flag=' -expect_unresolved \*'
codecrypt-1.8/configure:10301: archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
codecrypt-1.8/configure:10302: archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
codecrypt-1.8/configure:10303: $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp'
codecrypt-1.8/configure-10304-
##############################################
codecrypt-1.8/configure-10319- else
codecrypt-1.8/configure:10320: case `$CC -V 2>&1` in
codecrypt-1.8/configure-10321- *"Compilers 5.0"*)
##############################################
codecrypt-1.8/configure-10718- esac
codecrypt-1.8/configure:10719: lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
codecrypt-1.8/configure-10720- case $lt_search_path_spec in
##############################################
codecrypt-1.8/configure-10725- # okay in the real world where ";" in dirpaths is itself problematic.
codecrypt-1.8/configure:10726: lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
codecrypt-1.8/configure-10727- ;;
codecrypt-1.8/configure-10728- *)
codecrypt-1.8/configure:10729: lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
codecrypt-1.8/configure-10730- ;;
##############################################
codecrypt-1.8/configure-10734- lt_tmp_lt_search_path_spec=
codecrypt-1.8/configure:10735: lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
codecrypt-1.8/configure-10736- # ...but if some path component already ends with the multilib dir we assume
##############################################
codecrypt-1.8/configure-10776- esac
codecrypt-1.8/configure:10777: sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
codecrypt-1.8/configure-10778-else
##############################################
codecrypt-1.8/configure-10916- # Create ${libname}_ixlibrary.a entries in /sys/libs.
codecrypt-1.8/configure:10917: finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
codecrypt-1.8/configure-10918- ;;
##############################################
codecrypt-1.8/configure-10952- # DLL is installed to $(libdir)/../bin by postinstall_cmds
codecrypt-1.8/configure:10953: postinstall_cmds='base_file=`basename \$file`~
codecrypt-1.8/configure:10954: dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
codecrypt-1.8/configure:10955: dldir=$destdir/`dirname \$dlpath`~
codecrypt-1.8/configure-10956- test -d \$dldir || mkdir -p \$dldir~
##############################################
codecrypt-1.8/configure-10961- fi'
codecrypt-1.8/configure:10962: postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
codecrypt-1.8/configure-10963- dlpath=$dir/\$dldll~
##############################################
codecrypt-1.8/configure-10969- # Cygwin DLLs use 'cyg' prefix rather than 'lib'
codecrypt-1.8/configure:10970: soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
codecrypt-1.8/configure-10971-
##############################################
codecrypt-1.8/configure-10975- # MinGW DLLs use traditional 'lib' prefix
codecrypt-1.8/configure:10976: soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
codecrypt-1.8/configure-10977- ;;
##############################################
codecrypt-1.8/configure-10979- # pw32 DLLs use 'pw' prefix rather than 'lib'
codecrypt-1.8/configure:10980: library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
codecrypt-1.8/configure-10981- ;;
##############################################
codecrypt-1.8/configure-10988- libname_spec='$name'
codecrypt-1.8/configure:10989: soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
codecrypt-1.8/configure-10990- library_names_spec='$libname.dll.lib'
##############################################
codecrypt-1.8/configure-11000- # Let DOS variable expansion print the short 8.3 style file name.
codecrypt-1.8/configure:11001: lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
codecrypt-1.8/configure-11002- sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
##############################################
codecrypt-1.8/configure-11005- # Convert to MSYS style.
codecrypt-1.8/configure:11006: sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
codecrypt-1.8/configure-11007- ;;
##############################################
codecrypt-1.8/configure-11011- # like /cygdrive/c/PROGRA~1:/cygdr...
codecrypt-1.8/configure:11012: sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
codecrypt-1.8/configure:11013: sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
codecrypt-1.8/configure:11014: sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
codecrypt-1.8/configure-11015- ;;
##############################################
codecrypt-1.8/configure-11019- # It is most probably a Windows format PATH.
codecrypt-1.8/configure:11020: sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
codecrypt-1.8/configure-11021- else
codecrypt-1.8/configure:11022: sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
codecrypt-1.8/configure-11023- fi
##############################################
codecrypt-1.8/configure-11029- # DLL is installed to $(libdir)/../bin by postinstall_cmds
codecrypt-1.8/configure:11030: postinstall_cmds='base_file=`basename \$file`~
codecrypt-1.8/configure:11031: dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
codecrypt-1.8/configure:11032: dldir=$destdir/`dirname \$dlpath`~
codecrypt-1.8/configure-11033- test -d \$dldir || mkdir -p \$dldir~
codecrypt-1.8/configure-11034- $install_prog $dir/$dlname \$dldir/$dlname'
codecrypt-1.8/configure:11035: postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
codecrypt-1.8/configure-11036- dlpath=$dir/\$dldll~
##############################################
codecrypt-1.8/configure-11043- # Assume MSVC wrapper
codecrypt-1.8/configure:11044: library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib'
codecrypt-1.8/configure-11045- dynamic_linker='Win32 ld.exe'
##############################################
codecrypt-1.8/configure-11060- shlibpath_var=DYLD_LIBRARY_PATH
codecrypt-1.8/configure:11061: shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
codecrypt-1.8/configure-11062-
##############################################
codecrypt-1.8/configure-11313- if test -f /etc/ld.so.conf; then
codecrypt-1.8/configure:11314: lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
codecrypt-1.8/configure-11315- sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
##############################################
codecrypt-1.8/configure-11379- need_lib_prefix=no
codecrypt-1.8/configure:11380: if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
codecrypt-1.8/configure-11381- need_version=no
##############################################
codecrypt-1.8/configure-11406- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
codecrypt-1.8/configure:11407: postinstall_cmds='base_file=`basename \$file`~
codecrypt-1.8/configure:11408: dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~
codecrypt-1.8/configure:11409: dldir=$destdir/`dirname \$dlpath`~
codecrypt-1.8/configure-11410- test -d \$dldir || mkdir -p \$dldir~
##############################################
codecrypt-1.8/configure-11415- fi'
codecrypt-1.8/configure:11416: postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~
codecrypt-1.8/configure-11417- dlpath=$dir/\$dldll~
##############################################
codecrypt-1.8/configure-12633- if test "$am_compiler_list" = ""; then
codecrypt-1.8/configure:12634: am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
codecrypt-1.8/configure-12635- fi
##############################################
codecrypt-1.8/configure-12737- case $2 in
codecrypt-1.8/configure:12738: .*) func_stripname_result=`$ECHO "$3" | $SED "s%^$1%%; s%\\\\$2\$%%"`;;
codecrypt-1.8/configure:12739: *) func_stripname_result=`$ECHO "$3" | $SED "s%^$1%%; s%$2\$%%"`;;
codecrypt-1.8/configure-12740- esac
##############################################
codecrypt-1.8/configure-13017- # gcc leaves a trailing carriage return, which upsets mingw
codecrypt-1.8/configure:13018: ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
codecrypt-1.8/configure-13019- *)
codecrypt-1.8/configure:13020: ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
codecrypt-1.8/configure-13021- esac
##############################################
codecrypt-1.8/configure-13026- # Canonicalize the pathname of ld
codecrypt-1.8/configure:13027: ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
codecrypt-1.8/configure-13028- while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
codecrypt-1.8/configure:13029: ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
codecrypt-1.8/configure-13030- done
##############################################
codecrypt-1.8/configure-13061- # Break only if it was the GNU/non-GNU ld that we prefer.
codecrypt-1.8/configure:13062: case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
codecrypt-1.8/configure-13063- *GNU* | *'with BFD'*)
##############################################
codecrypt-1.8/configure-13092- # I'd rather use --version here, but apparently some GNU lds only accept -v.
codecrypt-1.8/configure:13093:case `$LD -v 2>&1 </dev/null` in
codecrypt-1.8/configure-13094-*GNU* | *'with BFD'*)
##############################################
codecrypt-1.8/configure-13126- # ancient GNU ld didn't support --whole-archive et. al.
codecrypt-1.8/configure:13127: if eval "`$CC -print-prog-name=ld` --help 2>&1" |
codecrypt-1.8/configure-13128- $GREP 'no-whole-archive' > /dev/null; then
##############################################
codecrypt-1.8/configure-13237- # below for broken collect2 doesn't work under 4.3+
codecrypt-1.8/configure:13238: collect2name=`$CC -print-prog-name=collect2`
codecrypt-1.8/configure-13239- if test -f "$collect2name" &&
##############################################
codecrypt-1.8/configure-13318- }'
codecrypt-1.8/configure:13319: lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
codecrypt-1.8/configure-13320- # Check for a 64-bit object if we didn't find anything.
codecrypt-1.8/configure-13321- if test -z "$lt_cv_aix_libpath__CXX"; then
codecrypt-1.8/configure:13322: lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
codecrypt-1.8/configure-13323- fi
##############################################
codecrypt-1.8/configure-13337-
codecrypt-1.8/configure:13338: archive_expsym_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
codecrypt-1.8/configure-13339- else
##############################################
codecrypt-1.8/configure-13372- }'
codecrypt-1.8/configure:13373: lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
codecrypt-1.8/configure-13374- # Check for a 64-bit object if we didn't find anything.
codecrypt-1.8/configure-13375- if test -z "$lt_cv_aix_libpath__CXX"; then
codecrypt-1.8/configure:13376: lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
codecrypt-1.8/configure-13377- fi
##############################################
codecrypt-1.8/configure-13404- # -brtl affects multiple linker settings, -berok does not and is overridden later
codecrypt-1.8/configure:13405: compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([, ]\\)%-berok\\1%g"`'
codecrypt-1.8/configure-13406- if test svr4 != "$with_aix_soname"; then
##############################################
codecrypt-1.8/configure-13457- archive_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
codecrypt-1.8/configure:13458: archive_expsym_cmds_CXX='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then
codecrypt-1.8/configure-13459- cp "$export_symbols" "$output_objdir/$soname.def";
##############################################
codecrypt-1.8/configure-13499- # is; otherwise, prepend EXPORTS...
codecrypt-1.8/configure:13500: archive_expsym_cmds_CXX='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then
codecrypt-1.8/configure-13501- cp $export_symbols $output_objdir/$soname.def;
##############################################
codecrypt-1.8/configure-13520- if test yes = "$lt_cv_ld_force_load"; then
codecrypt-1.8/configure:13521: whole_archive_flag_spec_CXX='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
codecrypt-1.8/configure-13522-
##############################################
codecrypt-1.8/configure-13565- prefix_cmds="$SED"~
codecrypt-1.8/configure:13566: if test EXPORTS = "`$SED 1q $export_symbols`"; then
codecrypt-1.8/configure-13567- prefix_cmds="$prefix_cmds -e 1d";
##############################################
codecrypt-1.8/configure-13639- # dependencies.
codecrypt-1.8/configure:13640: output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
codecrypt-1.8/configure-13641- ;;
##############################################
codecrypt-1.8/configure-13704- # dependencies.
codecrypt-1.8/configure:13705: output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
codecrypt-1.8/configure-13706- ;;
##############################################
codecrypt-1.8/configure-13740- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
codecrypt-1.8/configure:13741: archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
codecrypt-1.8/configure:13742: archive_expsym_cmds_CXX='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
codecrypt-1.8/configure-13743- ;;
##############################################
codecrypt-1.8/configure-13747- # SGI C++
codecrypt-1.8/configure:13748: archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
codecrypt-1.8/configure-13749-
##############################################
codecrypt-1.8/configure-13758- if test no = "$with_gnu_ld"; then
codecrypt-1.8/configure:13759: archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
codecrypt-1.8/configure-13760- else
codecrypt-1.8/configure:13761: archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` -o $lib'
codecrypt-1.8/configure-13762- fi
##############################################
codecrypt-1.8/configure-13779- # to its proper name (with version) after linking.
codecrypt-1.8/configure:13780: archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
codecrypt-1.8/configure:13781: archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib $wl-retain-symbols-file,$export_symbols; mv \$templib $lib'
codecrypt-1.8/configure-13782- # Commands to make compiler produce verbose output that lists
##############################################
codecrypt-1.8/configure-13789- # dependencies.
codecrypt-1.8/configure:13790: output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
codecrypt-1.8/configure-13791-
##############################################
codecrypt-1.8/configure-13804- # earlier do not add the objects themselves.
codecrypt-1.8/configure:13805: case `$CC -V 2>&1` in
codecrypt-1.8/configure-13806- *"Version 7."*)
##############################################
codecrypt-1.8/configure-13825- # Portland Group C++ compiler
codecrypt-1.8/configure:13826: case `$CC -V` in
codecrypt-1.8/configure-13827- *pgCC\ [1-5].* | *pgcpp\ [1-5].*)
##############################################
codecrypt-1.8/configure-13830- $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
codecrypt-1.8/configure:13831: compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
codecrypt-1.8/configure-13832- old_archive_cmds_CXX='tpldir=Template.dir~
##############################################
codecrypt-1.8/configure-13834- $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
codecrypt-1.8/configure:13835: $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
codecrypt-1.8/configure-13836- $RANLIB $oldlib'
##############################################
codecrypt-1.8/configure-13839- $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
codecrypt-1.8/configure:13840: $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
codecrypt-1.8/configure-13841- archive_expsym_cmds_CXX='tpldir=Template.dir~
##############################################
codecrypt-1.8/configure-13843- $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
codecrypt-1.8/configure:13844: $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
codecrypt-1.8/configure-13845- ;;
##############################################
codecrypt-1.8/configure-13853- export_dynamic_flag_spec_CXX='$wl--export-dynamic'
codecrypt-1.8/configure:13854: whole_archive_flag_spec_CXX='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
codecrypt-1.8/configure-13855- ;;
##############################################
codecrypt-1.8/configure-13872- # dependencies.
codecrypt-1.8/configure:13873: output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
codecrypt-1.8/configure-13874- ;;
##############################################
codecrypt-1.8/configure-13887- *)
codecrypt-1.8/configure:13888: case `$CC -V 2>&1 | sed 5q` in
codecrypt-1.8/configure-13889- *Sun\ C*)
##############################################
codecrypt-1.8/configure-13894- hardcode_libdir_flag_spec_CXX='-R$libdir'
codecrypt-1.8/configure:13895: whole_archive_flag_spec_CXX='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
codecrypt-1.8/configure-13896- compiler_needs_object_CXX=yes
##############################################
codecrypt-1.8/configure-13959- hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir'
codecrypt-1.8/configure:13960: if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`"; then
codecrypt-1.8/configure-13961- archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file,$export_symbols -o $lib'
##############################################
codecrypt-1.8/configure-13978- # to its proper name (with version) after linking.
codecrypt-1.8/configure:13979: archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
codecrypt-1.8/configure-13980-
##############################################
codecrypt-1.8/configure-13999- allow_undefined_flag_CXX=' $wl-expect_unresolved $wl\*'
codecrypt-1.8/configure:14000: archive_cmds_CXX='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $soname `test -n "$verstring" && func_echo_all "$wl-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
codecrypt-1.8/configure-14001- hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir'
##############################################
codecrypt-1.8/configure-14004- allow_undefined_flag_CXX=' -expect_unresolved \*'
codecrypt-1.8/configure:14005: archive_cmds_CXX='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
codecrypt-1.8/configure:14006: archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
codecrypt-1.8/configure-14007- echo "-hidden">> $lib.exp~
codecrypt-1.8/configure:14008: $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname $wl-input $wl$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~
codecrypt-1.8/configure-14009- $RM $lib.exp'
##############################################
codecrypt-1.8/configure-14023- # dependencies.
codecrypt-1.8/configure:14024: output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
codecrypt-1.8/configure-14025- ;;
##############################################
codecrypt-1.8/configure-14030- osf3*)
codecrypt-1.8/configure:14031: archive_cmds_CXX='$CC -shared -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
codecrypt-1.8/configure-14032- ;;
codecrypt-1.8/configure-14033- *)
codecrypt-1.8/configure:14034: archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
codecrypt-1.8/configure-14035- ;;
##############################################
codecrypt-1.8/configure-14277-
codecrypt-1.8/configure:14278: for p in `eval "$output_verbose_link_cmd"`; do
codecrypt-1.8/configure-14279- case $prev$p in
##############################################
codecrypt-1.8/configure-14380-if test -n "${compiler_lib_search_path_CXX}"; then
codecrypt-1.8/configure:14381: compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | $SED -e 's! -L! !g' -e 's!^ !!'`
codecrypt-1.8/configure-14382-fi
##############################################
codecrypt-1.8/configure-14627- *)
codecrypt-1.8/configure:14628: case `$CC -V 2>&1 | sed 5q` in
codecrypt-1.8/configure-14629- *Sun\ C*)
##############################################
codecrypt-1.8/configure-15009- else
codecrypt-1.8/configure:15010: export_symbols_cmds_CXX='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
codecrypt-1.8/configure-15011- fi
##############################################
codecrypt-1.8/configure-15314- # Create ${libname}_ixlibrary.a entries in /sys/libs.
codecrypt-1.8/configure:15315: finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
codecrypt-1.8/configure-15316- ;;
##############################################
codecrypt-1.8/configure-15350- # DLL is installed to $(libdir)/../bin by postinstall_cmds
codecrypt-1.8/configure:15351: postinstall_cmds='base_file=`basename \$file`~
codecrypt-1.8/configure:15352: dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
codecrypt-1.8/configure:15353: dldir=$destdir/`dirname \$dlpath`~
codecrypt-1.8/configure-15354- test -d \$dldir || mkdir -p \$dldir~
##############################################
codecrypt-1.8/configure-15359- fi'
codecrypt-1.8/configure:15360: postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
codecrypt-1.8/configure-15361- dlpath=$dir/\$dldll~
##############################################
codecrypt-1.8/configure-15367- # Cygwin DLLs use 'cyg' prefix rather than 'lib'
codecrypt-1.8/configure:15368: soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
codecrypt-1.8/configure-15369-
##############################################
codecrypt-1.8/configure-15372- # MinGW DLLs use traditional 'lib' prefix
codecrypt-1.8/configure:15373: soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
codecrypt-1.8/configure-15374- ;;
##############################################
codecrypt-1.8/configure-15376- # pw32 DLLs use 'pw' prefix rather than 'lib'
codecrypt-1.8/configure:15377: library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
codecrypt-1.8/configure-15378- ;;
##############################################
codecrypt-1.8/configure-15385- libname_spec='$name'
codecrypt-1.8/configure:15386: soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
codecrypt-1.8/configure-15387- library_names_spec='$libname.dll.lib'
##############################################
codecrypt-1.8/configure-15397- # Let DOS variable expansion print the short 8.3 style file name.
codecrypt-1.8/configure:15398: lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
codecrypt-1.8/configure-15399- sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
##############################################
codecrypt-1.8/configure-15402- # Convert to MSYS style.
codecrypt-1.8/configure:15403: sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
codecrypt-1.8/configure-15404- ;;
##############################################
codecrypt-1.8/configure-15408- # like /cygdrive/c/PROGRA~1:/cygdr...
codecrypt-1.8/configure:15409: sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
codecrypt-1.8/configure:15410: sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
codecrypt-1.8/configure:15411: sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
codecrypt-1.8/configure-15412- ;;
##############################################
codecrypt-1.8/configure-15416- # It is most probably a Windows format PATH.
codecrypt-1.8/configure:15417: sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
codecrypt-1.8/configure-15418- else
codecrypt-1.8/configure:15419: sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
codecrypt-1.8/configure-15420- fi
##############################################
codecrypt-1.8/configure-15426- # DLL is installed to $(libdir)/../bin by postinstall_cmds
codecrypt-1.8/configure:15427: postinstall_cmds='base_file=`basename \$file`~
codecrypt-1.8/configure:15428: dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
codecrypt-1.8/configure:15429: dldir=$destdir/`dirname \$dlpath`~
codecrypt-1.8/configure-15430- test -d \$dldir || mkdir -p \$dldir~
codecrypt-1.8/configure-15431- $install_prog $dir/$dlname \$dldir/$dlname'
codecrypt-1.8/configure:15432: postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
codecrypt-1.8/configure-15433- dlpath=$dir/\$dldll~
##############################################
codecrypt-1.8/configure-15440- # Assume MSVC wrapper
codecrypt-1.8/configure:15441: library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib'
codecrypt-1.8/configure-15442- dynamic_linker='Win32 ld.exe'
##############################################
codecrypt-1.8/configure-15457- shlibpath_var=DYLD_LIBRARY_PATH
codecrypt-1.8/configure:15458: shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
codecrypt-1.8/configure-15459-
##############################################
codecrypt-1.8/configure-15709- if test -f /etc/ld.so.conf; then
codecrypt-1.8/configure:15710: lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
codecrypt-1.8/configure-15711- sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
##############################################
codecrypt-1.8/configure-15775- need_lib_prefix=no
codecrypt-1.8/configure:15776: if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
codecrypt-1.8/configure-15777- need_version=no
##############################################
codecrypt-1.8/configure-15802- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
codecrypt-1.8/configure:15803: postinstall_cmds='base_file=`basename \$file`~
codecrypt-1.8/configure:15804: dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~
codecrypt-1.8/configure:15805: dldir=$destdir/`dirname \$dlpath`~
codecrypt-1.8/configure-15806- test -d \$dldir || mkdir -p \$dldir~
##############################################
codecrypt-1.8/configure-15811- fi'
codecrypt-1.8/configure:15812: postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~
codecrypt-1.8/configure-15813- dlpath=$dir/\$dldll~
##############################################
codecrypt-1.8/configure-16475- test $ac_status = 0; }; then
codecrypt-1.8/configure:16476: pkg_cv_CRYPTOPP_CFLAGS=`$PKG_CONFIG --cflags "libcrypto++" 2>/dev/null`
codecrypt-1.8/configure-16477- test "x$?" != "x0" && pkg_failed=yes
##############################################
codecrypt-1.8/configure-16492- test $ac_status = 0; }; then
codecrypt-1.8/configure:16493: pkg_cv_CRYPTOPP_LIBS=`$PKG_CONFIG --libs "libcrypto++" 2>/dev/null`
codecrypt-1.8/configure-16494- test "x$?" != "x0" && pkg_failed=yes
##############################################
codecrypt-1.8/configure-16513- if test $_pkg_short_errors_supported = yes; then
codecrypt-1.8/configure:16514: CRYPTOPP_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libcrypto++" 2>&1`
codecrypt-1.8/configure-16515- else
codecrypt-1.8/configure:16516: CRYPTOPP_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libcrypto++" 2>&1`
codecrypt-1.8/configure-16517- fi
##############################################
codecrypt-1.8/configure-16659-do :
codecrypt-1.8/configure:16660: as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
codecrypt-1.8/configure-16661-ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
##############################################
codecrypt-1.8/configure-16663- cat >>confdefs.h <<_ACEOF
codecrypt-1.8/configure:16664:#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
codecrypt-1.8/configure-16665-_ACEOF
##############################################
codecrypt-1.8/configure-16675-do :
codecrypt-1.8/configure:16676: as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
codecrypt-1.8/configure-16677-ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
##############################################
codecrypt-1.8/configure-16679- cat >>confdefs.h <<_ACEOF
codecrypt-1.8/configure:16680:#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
codecrypt-1.8/configure-16681-_ACEOF
##############################################
codecrypt-1.8/configure-17011-'
codecrypt-1.8/configure:17012:DEFS=`sed -n "$ac_script" confdefs.h`
codecrypt-1.8/configure-17013-
##############################################
codecrypt-1.8/configure-17020- ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
codecrypt-1.8/configure:17021: ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
codecrypt-1.8/configure-17022- # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
##############################################
codecrypt-1.8/configure-17115-if test -z "$BASH_VERSION$ZSH_VERSION" \
codecrypt-1.8/configure:17116: && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
codecrypt-1.8/configure-17117- as_echo='print -r --'
codecrypt-1.8/configure-17118- as_echo_n='print -rn --'
codecrypt-1.8/configure:17119:elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
codecrypt-1.8/configure-17120- as_echo='printf %s\n'
##############################################
codecrypt-1.8/configure-17122-else
codecrypt-1.8/configure:17123: if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
codecrypt-1.8/configure-17124- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
##############################################
codecrypt-1.8/configure-17132- expr "X$arg" : "X\\(.*\\)$as_nl";
codecrypt-1.8/configure:17133: arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
codecrypt-1.8/configure-17134- esac;
##############################################
codecrypt-1.8/configure-17209-# ----------------------------------------
codecrypt-1.8/configure:17210:# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
codecrypt-1.8/configure-17211-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
##############################################
codecrypt-1.8/configure-17281- {
codecrypt-1.8/configure:17282: as_val=`expr "$@" || test $? -eq 1`
codecrypt-1.8/configure-17283- }
##############################################
codecrypt-1.8/configure-17385- case $as_dir in #(
codecrypt-1.8/configure:17386: *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
codecrypt-1.8/configure-17387- *) as_qdir=$as_dir;;
##############################################
codecrypt-1.8/configure-17511-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
codecrypt-1.8/configure:17512:ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
codecrypt-1.8/configure-17513-ac_cs_version="\\
##############################################
codecrypt-1.8/configure-17536- --*=?*)
codecrypt-1.8/configure:17537: ac_option=`expr "X$1" : 'X\([^=]*\)='`
codecrypt-1.8/configure:17538: ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
codecrypt-1.8/configure-17539- ac_shift=:
##############################################
codecrypt-1.8/configure-17541- --*=)
codecrypt-1.8/configure:17542: ac_option=`expr "X$1" : 'X\([^=]*\)='`
codecrypt-1.8/configure-17543- ac_optarg=
##############################################
codecrypt-1.8/configure-17565- case $ac_optarg in
codecrypt-1.8/configure:17566: *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
codecrypt-1.8/configure-17567- '') as_fn_error $? "missing file argument" ;;
##############################################
codecrypt-1.8/configure-17631-delay_variable_subst='$delay_variable_subst'
codecrypt-1.8/configure:17632:macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17633:macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17634:enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17635:enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17636:pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17637:enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17638:shared_archive_member_spec='`$ECHO "$shared_archive_member_spec" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17639:SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17640:ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17641:PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17642:host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17643:host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17644:host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17645:build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17646:build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17647:build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17648:SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17649:Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17650:GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17651:EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17652:FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17653:LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17654:NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17655:LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17656:max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17657:ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17658:exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17659:lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17660:lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17661:lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17662:lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17663:lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17664:reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17665:reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17666:OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17667:deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17668:file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17669:file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17670:want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17671:DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17672:sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17673:AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17674:AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17675:archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17676:STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17677:RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17678:old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17679:old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17680:old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17681:lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17682:CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17683:CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17684:compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17685:GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17686:lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17687:lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17688:lt_cv_sys_global_symbol_to_import='`$ECHO "$lt_cv_sys_global_symbol_to_import" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17689:lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17690:lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17691:lt_cv_nm_interface='`$ECHO "$lt_cv_nm_interface" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17692:nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17693:lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17694:lt_cv_truncate_bin='`$ECHO "$lt_cv_truncate_bin" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17695:objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17696:MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17697:lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17698:lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17699:lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17700:lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17701:lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17702:need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17703:MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17704:DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17705:NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17706:LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17707:OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17708:OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17709:libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17710:shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17711:extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17712:archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17713:enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17714:export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17715:whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17716:compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17717:old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17718:old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17719:archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17720:archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17721:module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17722:module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17723:with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17724:allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17725:no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17726:hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17727:hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17728:hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17729:hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17730:hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17731:hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17732:hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17733:inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17734:link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17735:always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17736:export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17737:exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17738:include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17739:prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17740:postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17741:file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17742:variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17743:need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17744:need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17745:version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17746:runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17747:shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17748:shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17749:libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17750:library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17751:soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17752:install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17753:postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17754:postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17755:finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17756:finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17757:hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17758:sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17759:configure_time_dlsearch_path='`$ECHO "$configure_time_dlsearch_path" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17760:configure_time_lt_sys_library_path='`$ECHO "$configure_time_lt_sys_library_path" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17761:hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17762:enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17763:enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17764:enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17765:old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17766:striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17767:compiler_lib_search_dirs='`$ECHO "$compiler_lib_search_dirs" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17768:predep_objects='`$ECHO "$predep_objects" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17769:postdep_objects='`$ECHO "$postdep_objects" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17770:predeps='`$ECHO "$predeps" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17771:postdeps='`$ECHO "$postdeps" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17772:compiler_lib_search_path='`$ECHO "$compiler_lib_search_path" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17773:LD_CXX='`$ECHO "$LD_CXX" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17774:reload_flag_CXX='`$ECHO "$reload_flag_CXX" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17775:reload_cmds_CXX='`$ECHO "$reload_cmds_CXX" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17776:old_archive_cmds_CXX='`$ECHO "$old_archive_cmds_CXX" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17777:compiler_CXX='`$ECHO "$compiler_CXX" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17778:GCC_CXX='`$ECHO "$GCC_CXX" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17779:lt_prog_compiler_no_builtin_flag_CXX='`$ECHO "$lt_prog_compiler_no_builtin_flag_CXX" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17780:lt_prog_compiler_pic_CXX='`$ECHO "$lt_prog_compiler_pic_CXX" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17781:lt_prog_compiler_wl_CXX='`$ECHO "$lt_prog_compiler_wl_CXX" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17782:lt_prog_compiler_static_CXX='`$ECHO "$lt_prog_compiler_static_CXX" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17783:lt_cv_prog_compiler_c_o_CXX='`$ECHO "$lt_cv_prog_compiler_c_o_CXX" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17784:archive_cmds_need_lc_CXX='`$ECHO "$archive_cmds_need_lc_CXX" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17785:enable_shared_with_static_runtimes_CXX='`$ECHO "$enable_shared_with_static_runtimes_CXX" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17786:export_dynamic_flag_spec_CXX='`$ECHO "$export_dynamic_flag_spec_CXX" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17787:whole_archive_flag_spec_CXX='`$ECHO "$whole_archive_flag_spec_CXX" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17788:compiler_needs_object_CXX='`$ECHO "$compiler_needs_object_CXX" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17789:old_archive_from_new_cmds_CXX='`$ECHO "$old_archive_from_new_cmds_CXX" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17790:old_archive_from_expsyms_cmds_CXX='`$ECHO "$old_archive_from_expsyms_cmds_CXX" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17791:archive_cmds_CXX='`$ECHO "$archive_cmds_CXX" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17792:archive_expsym_cmds_CXX='`$ECHO "$archive_expsym_cmds_CXX" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17793:module_cmds_CXX='`$ECHO "$module_cmds_CXX" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17794:module_expsym_cmds_CXX='`$ECHO "$module_expsym_cmds_CXX" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17795:with_gnu_ld_CXX='`$ECHO "$with_gnu_ld_CXX" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17796:allow_undefined_flag_CXX='`$ECHO "$allow_undefined_flag_CXX" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17797:no_undefined_flag_CXX='`$ECHO "$no_undefined_flag_CXX" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17798:hardcode_libdir_flag_spec_CXX='`$ECHO "$hardcode_libdir_flag_spec_CXX" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17799:hardcode_libdir_separator_CXX='`$ECHO "$hardcode_libdir_separator_CXX" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17800:hardcode_direct_CXX='`$ECHO "$hardcode_direct_CXX" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17801:hardcode_direct_absolute_CXX='`$ECHO "$hardcode_direct_absolute_CXX" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17802:hardcode_minus_L_CXX='`$ECHO "$hardcode_minus_L_CXX" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17803:hardcode_shlibpath_var_CXX='`$ECHO "$hardcode_shlibpath_var_CXX" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17804:hardcode_automatic_CXX='`$ECHO "$hardcode_automatic_CXX" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17805:inherit_rpath_CXX='`$ECHO "$inherit_rpath_CXX" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17806:link_all_deplibs_CXX='`$ECHO "$link_all_deplibs_CXX" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17807:always_export_symbols_CXX='`$ECHO "$always_export_symbols_CXX" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17808:export_symbols_cmds_CXX='`$ECHO "$export_symbols_cmds_CXX" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17809:exclude_expsyms_CXX='`$ECHO "$exclude_expsyms_CXX" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17810:include_expsyms_CXX='`$ECHO "$include_expsyms_CXX" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17811:prelink_cmds_CXX='`$ECHO "$prelink_cmds_CXX" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17812:postlink_cmds_CXX='`$ECHO "$postlink_cmds_CXX" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17813:file_list_spec_CXX='`$ECHO "$file_list_spec_CXX" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17814:hardcode_action_CXX='`$ECHO "$hardcode_action_CXX" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17815:compiler_lib_search_dirs_CXX='`$ECHO "$compiler_lib_search_dirs_CXX" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17816:predep_objects_CXX='`$ECHO "$predep_objects_CXX" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17817:postdep_objects_CXX='`$ECHO "$postdep_objects_CXX" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17818:predeps_CXX='`$ECHO "$predeps_CXX" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17819:postdeps_CXX='`$ECHO "$postdeps_CXX" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure:17820:compiler_lib_search_path_CXX='`$ECHO "$compiler_lib_search_path_CXX" | $SED "$delay_single_quote_subst"`'
codecrypt-1.8/configure-17821-
##############################################
codecrypt-1.8/configure-17933-compiler_lib_search_path_CXX; do
codecrypt-1.8/configure:17934: case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
codecrypt-1.8/configure-17935- *[\\\\\\\`\\"\\\$]*)
codecrypt-1.8/configure:17936: eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
codecrypt-1.8/configure-17937- ;;
##############################################
codecrypt-1.8/configure-17975-postlink_cmds_CXX; do
codecrypt-1.8/configure:17976: case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
codecrypt-1.8/configure-17977- *[\\\\\\\`\\"\\\$]*)
codecrypt-1.8/configure:17978: eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
codecrypt-1.8/configure-17979- ;;
##############################################
codecrypt-1.8/configure-18070-fi
codecrypt-1.8/configure:18071:ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
codecrypt-1.8/configure-18072-if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
##############################################
codecrypt-1.8/configure-18087- as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
codecrypt-1.8/configure:18088:ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
codecrypt-1.8/configure-18089-ac_delim='%!_!# '
##############################################
codecrypt-1.8/configure-18093-
codecrypt-1.8/configure:18094: ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
codecrypt-1.8/configure-18095- if test $ac_delim_n = $ac_delim_num; then
##############################################
codecrypt-1.8/configure-18255- esac
codecrypt-1.8/configure:18256: case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
codecrypt-1.8/configure-18257- as_fn_append ac_file_inputs " '$ac_f'"
##############################################
codecrypt-1.8/configure-18314-*)
codecrypt-1.8/configure:18315: ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
codecrypt-1.8/configure-18316- # A ".." for each directory in $ac_dir_suffix.
codecrypt-1.8/configure:18317: ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
codecrypt-1.8/configure-18318- case $ac_top_builddir_sub in
##############################################
codecrypt-1.8/configure-18375-/@mandir@/p'
codecrypt-1.8/configure:18376:case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
codecrypt-1.8/configure-18377-*datarootdir*) ac_datarootdir_seen=yes;;
##############################################
codecrypt-1.8/configure-18392-
codecrypt-1.8/configure:18393:# Neutralize VPATH when `$srcdir' = `.'.
codecrypt-1.8/configure-18394-# Shell code in configure.ac might set extrasub.
##############################################
codecrypt-1.8/configure-18420-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
codecrypt-1.8/configure:18421: { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
codecrypt-1.8/configure-18422- { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \
##############################################
codecrypt-1.8/configure-18456- # Strip MF so we end up with the name of the file.
codecrypt-1.8/configure:18457: mf=`echo "$mf" | sed -e 's/:.*$//'`
codecrypt-1.8/configure-18458- # Check whether this is an Automake generated Makefile or not.
##############################################
codecrypt-1.8/configure-18493- # from the Makefile without running 'make'.
codecrypt-1.8/configure:18494: DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
codecrypt-1.8/configure-18495- test -z "$DEPDIR" && continue
codecrypt-1.8/configure:18496: am__include=`sed -n 's/^am__include = //p' < "$mf"`
codecrypt-1.8/configure-18497- test -z "$am__include" && continue
codecrypt-1.8/configure:18498: am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
codecrypt-1.8/configure-18499- # Find all dependency output files, they are included files with
##############################################
codecrypt-1.8/configure-19028- *:)
codecrypt-1.8/configure:19029: eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\"
codecrypt-1.8/configure-19030- ;;
codecrypt-1.8/configure-19031- x:*)
codecrypt-1.8/configure:19032: eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\"
codecrypt-1.8/configure-19033- ;;
codecrypt-1.8/configure-19034- *::*)
codecrypt-1.8/configure:19035: eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
codecrypt-1.8/configure:19036: eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\"
codecrypt-1.8/configure-19037- ;;
codecrypt-1.8/configure-19038- *)
codecrypt-1.8/configure:19039: eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\"
codecrypt-1.8/configure-19040- ;;
##############################################
codecrypt-1.8/configure-19055- done
codecrypt-1.8/configure:19056: func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
codecrypt-1.8/configure-19057-}
##############################################
codecrypt-1.8/aclocal.m4-131- PKG_CHECK_EXISTS([$3],
codecrypt-1.8/aclocal.m4:132: [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`
codecrypt-1.8/aclocal.m4-133- test "x$?" != "x0" && pkg_failed=yes ],
##############################################
codecrypt-1.8/aclocal.m4-179- if test $_pkg_short_errors_supported = yes; then
codecrypt-1.8/aclocal.m4:180: $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1`
codecrypt-1.8/aclocal.m4-181- else
codecrypt-1.8/aclocal.m4:182: $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1`
codecrypt-1.8/aclocal.m4-183- fi
##############################################
codecrypt-1.8/aclocal.m4-368-# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
codecrypt-1.8/aclocal.m4:369:# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
codecrypt-1.8/aclocal.m4-370-# and then we would define $MISSING as
##############################################
codecrypt-1.8/aclocal.m4-383-# Expand $ac_aux_dir to an absolute path.
codecrypt-1.8/aclocal.m4:384:am_aux_dir=`cd "$ac_aux_dir" && pwd`
codecrypt-1.8/aclocal.m4-385-])
##############################################
codecrypt-1.8/aclocal.m4-481- if test "$am_compiler_list" = ""; then
codecrypt-1.8/aclocal.m4:482: am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
codecrypt-1.8/aclocal.m4-483- fi
##############################################
codecrypt-1.8/aclocal.m4-632- # Strip MF so we end up with the name of the file.
codecrypt-1.8/aclocal.m4:633: mf=`echo "$mf" | sed -e 's/:.*$//'`
codecrypt-1.8/aclocal.m4-634- # Check whether this is an Automake generated Makefile or not.
##############################################
codecrypt-1.8/aclocal.m4-641- if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
codecrypt-1.8/aclocal.m4:642: dirpart=`AS_DIRNAME("$mf")`
codecrypt-1.8/aclocal.m4-643- else
##############################################
codecrypt-1.8/aclocal.m4-647- # from the Makefile without running 'make'.
codecrypt-1.8/aclocal.m4:648: DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
codecrypt-1.8/aclocal.m4-649- test -z "$DEPDIR" && continue
codecrypt-1.8/aclocal.m4:650: am__include=`sed -n 's/^am__include = //p' < "$mf"`
codecrypt-1.8/aclocal.m4-651- test -z "$am__include" && continue
codecrypt-1.8/aclocal.m4:652: am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
codecrypt-1.8/aclocal.m4-653- # Find all dependency output files, they are included files with
##############################################
codecrypt-1.8/aclocal.m4-661- test -f "$dirpart/$file" && continue
codecrypt-1.8/aclocal.m4:662: fdir=`AS_DIRNAME(["$file"])`
codecrypt-1.8/aclocal.m4-663- AS_MKDIR_P([$dirpart/$fdir])
##############################################
codecrypt-1.8/aclocal.m4-719-AC_REQUIRE([AC_PROG_INSTALL])dnl
codecrypt-1.8/aclocal.m4:720:if test "`cd $srcdir && pwd`" != "`pwd`"; then
codecrypt-1.8/aclocal.m4-721- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
##############################################
codecrypt-1.8/aclocal.m4-878- * )
codecrypt-1.8/aclocal.m4:879: _am_stamp_count=`expr $_am_stamp_count + 1` ;;
codecrypt-1.8/aclocal.m4-880- esac
codecrypt-1.8/aclocal.m4-881-done
codecrypt-1.8/aclocal.m4:882:echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
codecrypt-1.8/aclocal.m4-883-
##############################################
codecrypt-1.8/aclocal.m4-949-# Ignore all kinds of additional output from 'make'.
codecrypt-1.8/aclocal.m4:950:case `$am_make -s -f confmf 2> /dev/null` in #(
codecrypt-1.8/aclocal.m4-951-*the\ am__doit\ target*)
##############################################
codecrypt-1.8/aclocal.m4-959- echo '.include "confinc"' > confmf
codecrypt-1.8/aclocal.m4:960: case `$am_make -s -f confmf 2> /dev/null` in #(
codecrypt-1.8/aclocal.m4-961- *the\ am__doit\ target*)
##############################################
codecrypt-1.8/aclocal.m4-1141- echo "timestamp, slept: $am_has_slept" > conftest.file
codecrypt-1.8/aclocal.m4:1142: set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
codecrypt-1.8/aclocal.m4-1143- if test "$[*]" = "X"; then
codecrypt-1.8/aclocal.m4-1144- # -L didn't work.
codecrypt-1.8/aclocal.m4:1145: set X `ls -t "$srcdir/configure" conftest.file`
codecrypt-1.8/aclocal.m4-1146- fi
##############################################
codecrypt-1.8/autogen.sh-20-echo "dist_man_MANS = man/${NAME}.1" >>$OUT
codecrypt-1.8/autogen.sh:21:echo "dist_noinst_SCRIPTS = autogen.sh" `for i in $DISTDIRS ; do find \$i -type f ; done | tr "\n" " " ` >>$OUT
codecrypt-1.8/autogen.sh-22-
##############################################
codecrypt-1.8/Makefile.in-52- { \
codecrypt-1.8/Makefile.in:53: flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
codecrypt-1.8/Makefile.in-54- }; \
##############################################
codecrypt-1.8/Makefile.in-181- esac
codecrypt-1.8/Makefile.in:182:am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
codecrypt-1.8/Makefile.in-183-am__vpath_adj = case $$p in \
codecrypt-1.8/Makefile.in:184: $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
codecrypt-1.8/Makefile.in-185- *) f=$$p;; \
codecrypt-1.8/Makefile.in-186- esac;
codecrypt-1.8/Makefile.in:187:am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
codecrypt-1.8/Makefile.in-188-am__install_max = 40
codecrypt-1.8/Makefile.in-189-am__nobase_strip_setup = \
codecrypt-1.8/Makefile.in:190: srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
codecrypt-1.8/Makefile.in-191-am__nobase_strip = \
##############################################
codecrypt-1.8/Makefile.in-474- test -n "$(EXEEXT)" || exit 0; \
codecrypt-1.8/Makefile.in:475: list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
codecrypt-1.8/Makefile.in-476- echo " rm -f" $$list; \
##############################################
codecrypt-1.8/Makefile.in-593-.cpp.o:
codecrypt-1.8/Makefile.in:594:@am__fastdepCXX_TRUE@ $(AM_V_CXX)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
codecrypt-1.8/Makefile.in-595-@am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
##############################################
codecrypt-1.8/Makefile.in-601-.cpp.obj:
codecrypt-1.8/Makefile.in:602:@am__fastdepCXX_TRUE@ $(AM_V_CXX)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
codecrypt-1.8/Makefile.in:603:@am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\
codecrypt-1.8/Makefile.in-604-@am__fastdepCXX_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po
##############################################
codecrypt-1.8/Makefile.in-606-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:607:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
codecrypt-1.8/Makefile.in-608-
codecrypt-1.8/Makefile.in-609-.cpp.lo:
codecrypt-1.8/Makefile.in:610:@am__fastdepCXX_TRUE@ $(AM_V_CXX)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\
codecrypt-1.8/Makefile.in-611-@am__fastdepCXX_TRUE@ $(LTCXXCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
##############################################
codecrypt-1.8/Makefile.in-617-src/ccr-serialization.o: src/serialization.cpp
codecrypt-1.8/Makefile.in:618:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-serialization.o -MD -MP -MF src/$(DEPDIR)/ccr-serialization.Tpo -c -o src/ccr-serialization.o `test -f 'src/serialization.cpp' || echo '$(srcdir)/'`src/serialization.cpp
codecrypt-1.8/Makefile.in-619-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-serialization.Tpo src/$(DEPDIR)/ccr-serialization.Po
##############################################
codecrypt-1.8/Makefile.in-621-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:622:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-serialization.o `test -f 'src/serialization.cpp' || echo '$(srcdir)/'`src/serialization.cpp
codecrypt-1.8/Makefile.in-623-
codecrypt-1.8/Makefile.in-624-src/ccr-serialization.obj: src/serialization.cpp
codecrypt-1.8/Makefile.in:625:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-serialization.obj -MD -MP -MF src/$(DEPDIR)/ccr-serialization.Tpo -c -o src/ccr-serialization.obj `if test -f 'src/serialization.cpp'; then $(CYGPATH_W) 'src/serialization.cpp'; else $(CYGPATH_W) '$(srcdir)/src/serialization.cpp'; fi`
codecrypt-1.8/Makefile.in-626-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-serialization.Tpo src/$(DEPDIR)/ccr-serialization.Po
##############################################
codecrypt-1.8/Makefile.in-628-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:629:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-serialization.obj `if test -f 'src/serialization.cpp'; then $(CYGPATH_W) 'src/serialization.cpp'; else $(CYGPATH_W) '$(srcdir)/src/serialization.cpp'; fi`
codecrypt-1.8/Makefile.in-630-
codecrypt-1.8/Makefile.in-631-src/ccr-algo_suite.o: src/algo_suite.cpp
codecrypt-1.8/Makefile.in:632:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-algo_suite.o -MD -MP -MF src/$(DEPDIR)/ccr-algo_suite.Tpo -c -o src/ccr-algo_suite.o `test -f 'src/algo_suite.cpp' || echo '$(srcdir)/'`src/algo_suite.cpp
codecrypt-1.8/Makefile.in-633-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-algo_suite.Tpo src/$(DEPDIR)/ccr-algo_suite.Po
##############################################
codecrypt-1.8/Makefile.in-635-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:636:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-algo_suite.o `test -f 'src/algo_suite.cpp' || echo '$(srcdir)/'`src/algo_suite.cpp
codecrypt-1.8/Makefile.in-637-
codecrypt-1.8/Makefile.in-638-src/ccr-algo_suite.obj: src/algo_suite.cpp
codecrypt-1.8/Makefile.in:639:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-algo_suite.obj -MD -MP -MF src/$(DEPDIR)/ccr-algo_suite.Tpo -c -o src/ccr-algo_suite.obj `if test -f 'src/algo_suite.cpp'; then $(CYGPATH_W) 'src/algo_suite.cpp'; else $(CYGPATH_W) '$(srcdir)/src/algo_suite.cpp'; fi`
codecrypt-1.8/Makefile.in-640-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-algo_suite.Tpo src/$(DEPDIR)/ccr-algo_suite.Po
##############################################
codecrypt-1.8/Makefile.in-642-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:643:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-algo_suite.obj `if test -f 'src/algo_suite.cpp'; then $(CYGPATH_W) 'src/algo_suite.cpp'; else $(CYGPATH_W) '$(srcdir)/src/algo_suite.cpp'; fi`
codecrypt-1.8/Makefile.in-644-
codecrypt-1.8/Makefile.in-645-src/ccr-str_match.o: src/str_match.cpp
codecrypt-1.8/Makefile.in:646:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-str_match.o -MD -MP -MF src/$(DEPDIR)/ccr-str_match.Tpo -c -o src/ccr-str_match.o `test -f 'src/str_match.cpp' || echo '$(srcdir)/'`src/str_match.cpp
codecrypt-1.8/Makefile.in-647-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-str_match.Tpo src/$(DEPDIR)/ccr-str_match.Po
##############################################
codecrypt-1.8/Makefile.in-649-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:650:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-str_match.o `test -f 'src/str_match.cpp' || echo '$(srcdir)/'`src/str_match.cpp
codecrypt-1.8/Makefile.in-651-
codecrypt-1.8/Makefile.in-652-src/ccr-str_match.obj: src/str_match.cpp
codecrypt-1.8/Makefile.in:653:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-str_match.obj -MD -MP -MF src/$(DEPDIR)/ccr-str_match.Tpo -c -o src/ccr-str_match.obj `if test -f 'src/str_match.cpp'; then $(CYGPATH_W) 'src/str_match.cpp'; else $(CYGPATH_W) '$(srcdir)/src/str_match.cpp'; fi`
codecrypt-1.8/Makefile.in-654-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-str_match.Tpo src/$(DEPDIR)/ccr-str_match.Po
##############################################
codecrypt-1.8/Makefile.in-656-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:657:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-str_match.obj `if test -f 'src/str_match.cpp'; then $(CYGPATH_W) 'src/str_match.cpp'; else $(CYGPATH_W) '$(srcdir)/src/str_match.cpp'; fi`
codecrypt-1.8/Makefile.in-658-
codecrypt-1.8/Makefile.in-659-src/ccr-generator.o: src/generator.cpp
codecrypt-1.8/Makefile.in:660:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-generator.o -MD -MP -MF src/$(DEPDIR)/ccr-generator.Tpo -c -o src/ccr-generator.o `test -f 'src/generator.cpp' || echo '$(srcdir)/'`src/generator.cpp
codecrypt-1.8/Makefile.in-661-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-generator.Tpo src/$(DEPDIR)/ccr-generator.Po
##############################################
codecrypt-1.8/Makefile.in-663-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:664:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-generator.o `test -f 'src/generator.cpp' || echo '$(srcdir)/'`src/generator.cpp
codecrypt-1.8/Makefile.in-665-
codecrypt-1.8/Makefile.in-666-src/ccr-generator.obj: src/generator.cpp
codecrypt-1.8/Makefile.in:667:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-generator.obj -MD -MP -MF src/$(DEPDIR)/ccr-generator.Tpo -c -o src/ccr-generator.obj `if test -f 'src/generator.cpp'; then $(CYGPATH_W) 'src/generator.cpp'; else $(CYGPATH_W) '$(srcdir)/src/generator.cpp'; fi`
codecrypt-1.8/Makefile.in-668-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-generator.Tpo src/$(DEPDIR)/ccr-generator.Po
##############################################
codecrypt-1.8/Makefile.in-670-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:671:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-generator.obj `if test -f 'src/generator.cpp'; then $(CYGPATH_W) 'src/generator.cpp'; else $(CYGPATH_W) '$(srcdir)/src/generator.cpp'; fi`
codecrypt-1.8/Makefile.in-672-
codecrypt-1.8/Makefile.in-673-src/ccr-algos_enc.o: src/algos_enc.cpp
codecrypt-1.8/Makefile.in:674:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-algos_enc.o -MD -MP -MF src/$(DEPDIR)/ccr-algos_enc.Tpo -c -o src/ccr-algos_enc.o `test -f 'src/algos_enc.cpp' || echo '$(srcdir)/'`src/algos_enc.cpp
codecrypt-1.8/Makefile.in-675-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-algos_enc.Tpo src/$(DEPDIR)/ccr-algos_enc.Po
##############################################
codecrypt-1.8/Makefile.in-677-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:678:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-algos_enc.o `test -f 'src/algos_enc.cpp' || echo '$(srcdir)/'`src/algos_enc.cpp
codecrypt-1.8/Makefile.in-679-
codecrypt-1.8/Makefile.in-680-src/ccr-algos_enc.obj: src/algos_enc.cpp
codecrypt-1.8/Makefile.in:681:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-algos_enc.obj -MD -MP -MF src/$(DEPDIR)/ccr-algos_enc.Tpo -c -o src/ccr-algos_enc.obj `if test -f 'src/algos_enc.cpp'; then $(CYGPATH_W) 'src/algos_enc.cpp'; else $(CYGPATH_W) '$(srcdir)/src/algos_enc.cpp'; fi`
codecrypt-1.8/Makefile.in-682-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-algos_enc.Tpo src/$(DEPDIR)/ccr-algos_enc.Po
##############################################
codecrypt-1.8/Makefile.in-684-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:685:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-algos_enc.obj `if test -f 'src/algos_enc.cpp'; then $(CYGPATH_W) 'src/algos_enc.cpp'; else $(CYGPATH_W) '$(srcdir)/src/algos_enc.cpp'; fi`
codecrypt-1.8/Makefile.in-686-
codecrypt-1.8/Makefile.in-687-src/ccr-actions.o: src/actions.cpp
codecrypt-1.8/Makefile.in:688:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-actions.o -MD -MP -MF src/$(DEPDIR)/ccr-actions.Tpo -c -o src/ccr-actions.o `test -f 'src/actions.cpp' || echo '$(srcdir)/'`src/actions.cpp
codecrypt-1.8/Makefile.in-689-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-actions.Tpo src/$(DEPDIR)/ccr-actions.Po
##############################################
codecrypt-1.8/Makefile.in-691-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:692:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-actions.o `test -f 'src/actions.cpp' || echo '$(srcdir)/'`src/actions.cpp
codecrypt-1.8/Makefile.in-693-
codecrypt-1.8/Makefile.in-694-src/ccr-actions.obj: src/actions.cpp
codecrypt-1.8/Makefile.in:695:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-actions.obj -MD -MP -MF src/$(DEPDIR)/ccr-actions.Tpo -c -o src/ccr-actions.obj `if test -f 'src/actions.cpp'; then $(CYGPATH_W) 'src/actions.cpp'; else $(CYGPATH_W) '$(srcdir)/src/actions.cpp'; fi`
codecrypt-1.8/Makefile.in-696-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-actions.Tpo src/$(DEPDIR)/ccr-actions.Po
##############################################
codecrypt-1.8/Makefile.in-698-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:699:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-actions.obj `if test -f 'src/actions.cpp'; then $(CYGPATH_W) 'src/actions.cpp'; else $(CYGPATH_W) '$(srcdir)/src/actions.cpp'; fi`
codecrypt-1.8/Makefile.in-700-
codecrypt-1.8/Makefile.in-701-src/ccr-ios.o: src/ios.cpp
codecrypt-1.8/Makefile.in:702:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-ios.o -MD -MP -MF src/$(DEPDIR)/ccr-ios.Tpo -c -o src/ccr-ios.o `test -f 'src/ios.cpp' || echo '$(srcdir)/'`src/ios.cpp
codecrypt-1.8/Makefile.in-703-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-ios.Tpo src/$(DEPDIR)/ccr-ios.Po
##############################################
codecrypt-1.8/Makefile.in-705-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:706:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-ios.o `test -f 'src/ios.cpp' || echo '$(srcdir)/'`src/ios.cpp
codecrypt-1.8/Makefile.in-707-
codecrypt-1.8/Makefile.in-708-src/ccr-ios.obj: src/ios.cpp
codecrypt-1.8/Makefile.in:709:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-ios.obj -MD -MP -MF src/$(DEPDIR)/ccr-ios.Tpo -c -o src/ccr-ios.obj `if test -f 'src/ios.cpp'; then $(CYGPATH_W) 'src/ios.cpp'; else $(CYGPATH_W) '$(srcdir)/src/ios.cpp'; fi`
codecrypt-1.8/Makefile.in-710-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-ios.Tpo src/$(DEPDIR)/ccr-ios.Po
##############################################
codecrypt-1.8/Makefile.in-712-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:713:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-ios.obj `if test -f 'src/ios.cpp'; then $(CYGPATH_W) 'src/ios.cpp'; else $(CYGPATH_W) '$(srcdir)/src/ios.cpp'; fi`
codecrypt-1.8/Makefile.in-714-
codecrypt-1.8/Makefile.in-715-src/ccr-algos_sig.o: src/algos_sig.cpp
codecrypt-1.8/Makefile.in:716:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-algos_sig.o -MD -MP -MF src/$(DEPDIR)/ccr-algos_sig.Tpo -c -o src/ccr-algos_sig.o `test -f 'src/algos_sig.cpp' || echo '$(srcdir)/'`src/algos_sig.cpp
codecrypt-1.8/Makefile.in-717-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-algos_sig.Tpo src/$(DEPDIR)/ccr-algos_sig.Po
##############################################
codecrypt-1.8/Makefile.in-719-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:720:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-algos_sig.o `test -f 'src/algos_sig.cpp' || echo '$(srcdir)/'`src/algos_sig.cpp
codecrypt-1.8/Makefile.in-721-
codecrypt-1.8/Makefile.in-722-src/ccr-algos_sig.obj: src/algos_sig.cpp
codecrypt-1.8/Makefile.in:723:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-algos_sig.obj -MD -MP -MF src/$(DEPDIR)/ccr-algos_sig.Tpo -c -o src/ccr-algos_sig.obj `if test -f 'src/algos_sig.cpp'; then $(CYGPATH_W) 'src/algos_sig.cpp'; else $(CYGPATH_W) '$(srcdir)/src/algos_sig.cpp'; fi`
codecrypt-1.8/Makefile.in-724-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-algos_sig.Tpo src/$(DEPDIR)/ccr-algos_sig.Po
##############################################
codecrypt-1.8/Makefile.in-726-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:727:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-algos_sig.obj `if test -f 'src/algos_sig.cpp'; then $(CYGPATH_W) 'src/algos_sig.cpp'; else $(CYGPATH_W) '$(srcdir)/src/algos_sig.cpp'; fi`
codecrypt-1.8/Makefile.in-728-
codecrypt-1.8/Makefile.in-729-src/ccr-base64.o: src/base64.cpp
codecrypt-1.8/Makefile.in:730:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-base64.o -MD -MP -MF src/$(DEPDIR)/ccr-base64.Tpo -c -o src/ccr-base64.o `test -f 'src/base64.cpp' || echo '$(srcdir)/'`src/base64.cpp
codecrypt-1.8/Makefile.in-731-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-base64.Tpo src/$(DEPDIR)/ccr-base64.Po
##############################################
codecrypt-1.8/Makefile.in-733-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:734:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-base64.o `test -f 'src/base64.cpp' || echo '$(srcdir)/'`src/base64.cpp
codecrypt-1.8/Makefile.in-735-
codecrypt-1.8/Makefile.in-736-src/ccr-base64.obj: src/base64.cpp
codecrypt-1.8/Makefile.in:737:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-base64.obj -MD -MP -MF src/$(DEPDIR)/ccr-base64.Tpo -c -o src/ccr-base64.obj `if test -f 'src/base64.cpp'; then $(CYGPATH_W) 'src/base64.cpp'; else $(CYGPATH_W) '$(srcdir)/src/base64.cpp'; fi`
codecrypt-1.8/Makefile.in-738-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-base64.Tpo src/$(DEPDIR)/ccr-base64.Po
##############################################
codecrypt-1.8/Makefile.in-740-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:741:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-base64.obj `if test -f 'src/base64.cpp'; then $(CYGPATH_W) 'src/base64.cpp'; else $(CYGPATH_W) '$(srcdir)/src/base64.cpp'; fi`
codecrypt-1.8/Makefile.in-742-
codecrypt-1.8/Makefile.in-743-src/ccr-xsynd.o: src/xsynd.cpp
codecrypt-1.8/Makefile.in:744:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-xsynd.o -MD -MP -MF src/$(DEPDIR)/ccr-xsynd.Tpo -c -o src/ccr-xsynd.o `test -f 'src/xsynd.cpp' || echo '$(srcdir)/'`src/xsynd.cpp
codecrypt-1.8/Makefile.in-745-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-xsynd.Tpo src/$(DEPDIR)/ccr-xsynd.Po
##############################################
codecrypt-1.8/Makefile.in-747-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:748:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-xsynd.o `test -f 'src/xsynd.cpp' || echo '$(srcdir)/'`src/xsynd.cpp
codecrypt-1.8/Makefile.in-749-
codecrypt-1.8/Makefile.in-750-src/ccr-xsynd.obj: src/xsynd.cpp
codecrypt-1.8/Makefile.in:751:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-xsynd.obj -MD -MP -MF src/$(DEPDIR)/ccr-xsynd.Tpo -c -o src/ccr-xsynd.obj `if test -f 'src/xsynd.cpp'; then $(CYGPATH_W) 'src/xsynd.cpp'; else $(CYGPATH_W) '$(srcdir)/src/xsynd.cpp'; fi`
codecrypt-1.8/Makefile.in-752-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-xsynd.Tpo src/$(DEPDIR)/ccr-xsynd.Po
##############################################
codecrypt-1.8/Makefile.in-754-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:755:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-xsynd.obj `if test -f 'src/xsynd.cpp'; then $(CYGPATH_W) 'src/xsynd.cpp'; else $(CYGPATH_W) '$(srcdir)/src/xsynd.cpp'; fi`
codecrypt-1.8/Makefile.in-756-
codecrypt-1.8/Makefile.in-757-src/ccr-bvector.o: src/bvector.cpp
codecrypt-1.8/Makefile.in:758:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-bvector.o -MD -MP -MF src/$(DEPDIR)/ccr-bvector.Tpo -c -o src/ccr-bvector.o `test -f 'src/bvector.cpp' || echo '$(srcdir)/'`src/bvector.cpp
codecrypt-1.8/Makefile.in-759-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-bvector.Tpo src/$(DEPDIR)/ccr-bvector.Po
##############################################
codecrypt-1.8/Makefile.in-761-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:762:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-bvector.o `test -f 'src/bvector.cpp' || echo '$(srcdir)/'`src/bvector.cpp
codecrypt-1.8/Makefile.in-763-
codecrypt-1.8/Makefile.in-764-src/ccr-bvector.obj: src/bvector.cpp
codecrypt-1.8/Makefile.in:765:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-bvector.obj -MD -MP -MF src/$(DEPDIR)/ccr-bvector.Tpo -c -o src/ccr-bvector.obj `if test -f 'src/bvector.cpp'; then $(CYGPATH_W) 'src/bvector.cpp'; else $(CYGPATH_W) '$(srcdir)/src/bvector.cpp'; fi`
codecrypt-1.8/Makefile.in-766-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-bvector.Tpo src/$(DEPDIR)/ccr-bvector.Po
##############################################
codecrypt-1.8/Makefile.in-768-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:769:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-bvector.obj `if test -f 'src/bvector.cpp'; then $(CYGPATH_W) 'src/bvector.cpp'; else $(CYGPATH_W) '$(srcdir)/src/bvector.cpp'; fi`
codecrypt-1.8/Makefile.in-770-
codecrypt-1.8/Makefile.in-771-src/ccr-pwrng.o: src/pwrng.cpp
codecrypt-1.8/Makefile.in:772:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-pwrng.o -MD -MP -MF src/$(DEPDIR)/ccr-pwrng.Tpo -c -o src/ccr-pwrng.o `test -f 'src/pwrng.cpp' || echo '$(srcdir)/'`src/pwrng.cpp
codecrypt-1.8/Makefile.in-773-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-pwrng.Tpo src/$(DEPDIR)/ccr-pwrng.Po
##############################################
codecrypt-1.8/Makefile.in-775-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:776:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-pwrng.o `test -f 'src/pwrng.cpp' || echo '$(srcdir)/'`src/pwrng.cpp
codecrypt-1.8/Makefile.in-777-
codecrypt-1.8/Makefile.in-778-src/ccr-pwrng.obj: src/pwrng.cpp
codecrypt-1.8/Makefile.in:779:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-pwrng.obj -MD -MP -MF src/$(DEPDIR)/ccr-pwrng.Tpo -c -o src/ccr-pwrng.obj `if test -f 'src/pwrng.cpp'; then $(CYGPATH_W) 'src/pwrng.cpp'; else $(CYGPATH_W) '$(srcdir)/src/pwrng.cpp'; fi`
codecrypt-1.8/Makefile.in-780-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-pwrng.Tpo src/$(DEPDIR)/ccr-pwrng.Po
##############################################
codecrypt-1.8/Makefile.in-782-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:783:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-pwrng.obj `if test -f 'src/pwrng.cpp'; then $(CYGPATH_W) 'src/pwrng.cpp'; else $(CYGPATH_W) '$(srcdir)/src/pwrng.cpp'; fi`
codecrypt-1.8/Makefile.in-784-
codecrypt-1.8/Makefile.in-785-src/ccr-sc.o: src/sc.cpp
codecrypt-1.8/Makefile.in:786:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-sc.o -MD -MP -MF src/$(DEPDIR)/ccr-sc.Tpo -c -o src/ccr-sc.o `test -f 'src/sc.cpp' || echo '$(srcdir)/'`src/sc.cpp
codecrypt-1.8/Makefile.in-787-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-sc.Tpo src/$(DEPDIR)/ccr-sc.Po
##############################################
codecrypt-1.8/Makefile.in-789-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:790:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-sc.o `test -f 'src/sc.cpp' || echo '$(srcdir)/'`src/sc.cpp
codecrypt-1.8/Makefile.in-791-
codecrypt-1.8/Makefile.in-792-src/ccr-sc.obj: src/sc.cpp
codecrypt-1.8/Makefile.in:793:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-sc.obj -MD -MP -MF src/$(DEPDIR)/ccr-sc.Tpo -c -o src/ccr-sc.obj `if test -f 'src/sc.cpp'; then $(CYGPATH_W) 'src/sc.cpp'; else $(CYGPATH_W) '$(srcdir)/src/sc.cpp'; fi`
codecrypt-1.8/Makefile.in-794-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-sc.Tpo src/$(DEPDIR)/ccr-sc.Po
##############################################
codecrypt-1.8/Makefile.in-796-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:797:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-sc.obj `if test -f 'src/sc.cpp'; then $(CYGPATH_W) 'src/sc.cpp'; else $(CYGPATH_W) '$(srcdir)/src/sc.cpp'; fi`
codecrypt-1.8/Makefile.in-798-
codecrypt-1.8/Makefile.in-799-src/ccr-matrix.o: src/matrix.cpp
codecrypt-1.8/Makefile.in:800:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-matrix.o -MD -MP -MF src/$(DEPDIR)/ccr-matrix.Tpo -c -o src/ccr-matrix.o `test -f 'src/matrix.cpp' || echo '$(srcdir)/'`src/matrix.cpp
codecrypt-1.8/Makefile.in-801-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-matrix.Tpo src/$(DEPDIR)/ccr-matrix.Po
##############################################
codecrypt-1.8/Makefile.in-803-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:804:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-matrix.o `test -f 'src/matrix.cpp' || echo '$(srcdir)/'`src/matrix.cpp
codecrypt-1.8/Makefile.in-805-
codecrypt-1.8/Makefile.in-806-src/ccr-matrix.obj: src/matrix.cpp
codecrypt-1.8/Makefile.in:807:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-matrix.obj -MD -MP -MF src/$(DEPDIR)/ccr-matrix.Tpo -c -o src/ccr-matrix.obj `if test -f 'src/matrix.cpp'; then $(CYGPATH_W) 'src/matrix.cpp'; else $(CYGPATH_W) '$(srcdir)/src/matrix.cpp'; fi`
codecrypt-1.8/Makefile.in-808-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-matrix.Tpo src/$(DEPDIR)/ccr-matrix.Po
##############################################
codecrypt-1.8/Makefile.in-810-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:811:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-matrix.obj `if test -f 'src/matrix.cpp'; then $(CYGPATH_W) 'src/matrix.cpp'; else $(CYGPATH_W) '$(srcdir)/src/matrix.cpp'; fi`
codecrypt-1.8/Makefile.in-812-
codecrypt-1.8/Makefile.in-813-src/ccr-seclock.o: src/seclock.cpp
codecrypt-1.8/Makefile.in:814:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-seclock.o -MD -MP -MF src/$(DEPDIR)/ccr-seclock.Tpo -c -o src/ccr-seclock.o `test -f 'src/seclock.cpp' || echo '$(srcdir)/'`src/seclock.cpp
codecrypt-1.8/Makefile.in-815-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-seclock.Tpo src/$(DEPDIR)/ccr-seclock.Po
##############################################
codecrypt-1.8/Makefile.in-817-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:818:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-seclock.o `test -f 'src/seclock.cpp' || echo '$(srcdir)/'`src/seclock.cpp
codecrypt-1.8/Makefile.in-819-
codecrypt-1.8/Makefile.in-820-src/ccr-seclock.obj: src/seclock.cpp
codecrypt-1.8/Makefile.in:821:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-seclock.obj -MD -MP -MF src/$(DEPDIR)/ccr-seclock.Tpo -c -o src/ccr-seclock.obj `if test -f 'src/seclock.cpp'; then $(CYGPATH_W) 'src/seclock.cpp'; else $(CYGPATH_W) '$(srcdir)/src/seclock.cpp'; fi`
codecrypt-1.8/Makefile.in-822-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-seclock.Tpo src/$(DEPDIR)/ccr-seclock.Po
##############################################
codecrypt-1.8/Makefile.in-824-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:825:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-seclock.obj `if test -f 'src/seclock.cpp'; then $(CYGPATH_W) 'src/seclock.cpp'; else $(CYGPATH_W) '$(srcdir)/src/seclock.cpp'; fi`
codecrypt-1.8/Makefile.in-826-
codecrypt-1.8/Makefile.in-827-src/ccr-keyring.o: src/keyring.cpp
codecrypt-1.8/Makefile.in:828:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-keyring.o -MD -MP -MF src/$(DEPDIR)/ccr-keyring.Tpo -c -o src/ccr-keyring.o `test -f 'src/keyring.cpp' || echo '$(srcdir)/'`src/keyring.cpp
codecrypt-1.8/Makefile.in-829-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-keyring.Tpo src/$(DEPDIR)/ccr-keyring.Po
##############################################
codecrypt-1.8/Makefile.in-831-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:832:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-keyring.o `test -f 'src/keyring.cpp' || echo '$(srcdir)/'`src/keyring.cpp
codecrypt-1.8/Makefile.in-833-
codecrypt-1.8/Makefile.in-834-src/ccr-keyring.obj: src/keyring.cpp
codecrypt-1.8/Makefile.in:835:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-keyring.obj -MD -MP -MF src/$(DEPDIR)/ccr-keyring.Tpo -c -o src/ccr-keyring.obj `if test -f 'src/keyring.cpp'; then $(CYGPATH_W) 'src/keyring.cpp'; else $(CYGPATH_W) '$(srcdir)/src/keyring.cpp'; fi`
codecrypt-1.8/Makefile.in-836-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-keyring.Tpo src/$(DEPDIR)/ccr-keyring.Po
##############################################
codecrypt-1.8/Makefile.in-838-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:839:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-keyring.obj `if test -f 'src/keyring.cpp'; then $(CYGPATH_W) 'src/keyring.cpp'; else $(CYGPATH_W) '$(srcdir)/src/keyring.cpp'; fi`
codecrypt-1.8/Makefile.in-840-
codecrypt-1.8/Makefile.in-841-src/ccr-message.o: src/message.cpp
codecrypt-1.8/Makefile.in:842:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-message.o -MD -MP -MF src/$(DEPDIR)/ccr-message.Tpo -c -o src/ccr-message.o `test -f 'src/message.cpp' || echo '$(srcdir)/'`src/message.cpp
codecrypt-1.8/Makefile.in-843-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-message.Tpo src/$(DEPDIR)/ccr-message.Po
##############################################
codecrypt-1.8/Makefile.in-845-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:846:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-message.o `test -f 'src/message.cpp' || echo '$(srcdir)/'`src/message.cpp
codecrypt-1.8/Makefile.in-847-
codecrypt-1.8/Makefile.in-848-src/ccr-message.obj: src/message.cpp
codecrypt-1.8/Makefile.in:849:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-message.obj -MD -MP -MF src/$(DEPDIR)/ccr-message.Tpo -c -o src/ccr-message.obj `if test -f 'src/message.cpp'; then $(CYGPATH_W) 'src/message.cpp'; else $(CYGPATH_W) '$(srcdir)/src/message.cpp'; fi`
codecrypt-1.8/Makefile.in-850-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-message.Tpo src/$(DEPDIR)/ccr-message.Po
##############################################
codecrypt-1.8/Makefile.in-852-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:853:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-message.obj `if test -f 'src/message.cpp'; then $(CYGPATH_W) 'src/message.cpp'; else $(CYGPATH_W) '$(srcdir)/src/message.cpp'; fi`
codecrypt-1.8/Makefile.in-854-
codecrypt-1.8/Makefile.in-855-src/ccr-mce_qcmdpc.o: src/mce_qcmdpc.cpp
codecrypt-1.8/Makefile.in:856:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-mce_qcmdpc.o -MD -MP -MF src/$(DEPDIR)/ccr-mce_qcmdpc.Tpo -c -o src/ccr-mce_qcmdpc.o `test -f 'src/mce_qcmdpc.cpp' || echo '$(srcdir)/'`src/mce_qcmdpc.cpp
codecrypt-1.8/Makefile.in-857-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-mce_qcmdpc.Tpo src/$(DEPDIR)/ccr-mce_qcmdpc.Po
##############################################
codecrypt-1.8/Makefile.in-859-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:860:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-mce_qcmdpc.o `test -f 'src/mce_qcmdpc.cpp' || echo '$(srcdir)/'`src/mce_qcmdpc.cpp
codecrypt-1.8/Makefile.in-861-
codecrypt-1.8/Makefile.in-862-src/ccr-mce_qcmdpc.obj: src/mce_qcmdpc.cpp
codecrypt-1.8/Makefile.in:863:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-mce_qcmdpc.obj -MD -MP -MF src/$(DEPDIR)/ccr-mce_qcmdpc.Tpo -c -o src/ccr-mce_qcmdpc.obj `if test -f 'src/mce_qcmdpc.cpp'; then $(CYGPATH_W) 'src/mce_qcmdpc.cpp'; else $(CYGPATH_W) '$(srcdir)/src/mce_qcmdpc.cpp'; fi`
codecrypt-1.8/Makefile.in-864-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-mce_qcmdpc.Tpo src/$(DEPDIR)/ccr-mce_qcmdpc.Po
##############################################
codecrypt-1.8/Makefile.in-866-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:867:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-mce_qcmdpc.obj `if test -f 'src/mce_qcmdpc.cpp'; then $(CYGPATH_W) 'src/mce_qcmdpc.cpp'; else $(CYGPATH_W) '$(srcdir)/src/mce_qcmdpc.cpp'; fi`
codecrypt-1.8/Makefile.in-868-
codecrypt-1.8/Makefile.in-869-src/ccr-main.o: src/main.cpp
codecrypt-1.8/Makefile.in:870:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-main.o -MD -MP -MF src/$(DEPDIR)/ccr-main.Tpo -c -o src/ccr-main.o `test -f 'src/main.cpp' || echo '$(srcdir)/'`src/main.cpp
codecrypt-1.8/Makefile.in-871-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-main.Tpo src/$(DEPDIR)/ccr-main.Po
##############################################
codecrypt-1.8/Makefile.in-873-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:874:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-main.o `test -f 'src/main.cpp' || echo '$(srcdir)/'`src/main.cpp
codecrypt-1.8/Makefile.in-875-
codecrypt-1.8/Makefile.in-876-src/ccr-main.obj: src/main.cpp
codecrypt-1.8/Makefile.in:877:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-main.obj -MD -MP -MF src/$(DEPDIR)/ccr-main.Tpo -c -o src/ccr-main.obj `if test -f 'src/main.cpp'; then $(CYGPATH_W) 'src/main.cpp'; else $(CYGPATH_W) '$(srcdir)/src/main.cpp'; fi`
codecrypt-1.8/Makefile.in-878-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-main.Tpo src/$(DEPDIR)/ccr-main.Po
##############################################
codecrypt-1.8/Makefile.in-880-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:881:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-main.obj `if test -f 'src/main.cpp'; then $(CYGPATH_W) 'src/main.cpp'; else $(CYGPATH_W) '$(srcdir)/src/main.cpp'; fi`
codecrypt-1.8/Makefile.in-882-
codecrypt-1.8/Makefile.in-883-src/ccr-symkey.o: src/symkey.cpp
codecrypt-1.8/Makefile.in:884:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-symkey.o -MD -MP -MF src/$(DEPDIR)/ccr-symkey.Tpo -c -o src/ccr-symkey.o `test -f 'src/symkey.cpp' || echo '$(srcdir)/'`src/symkey.cpp
codecrypt-1.8/Makefile.in-885-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-symkey.Tpo src/$(DEPDIR)/ccr-symkey.Po
##############################################
codecrypt-1.8/Makefile.in-887-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:888:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-symkey.o `test -f 'src/symkey.cpp' || echo '$(srcdir)/'`src/symkey.cpp
codecrypt-1.8/Makefile.in-889-
codecrypt-1.8/Makefile.in-890-src/ccr-symkey.obj: src/symkey.cpp
codecrypt-1.8/Makefile.in:891:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-symkey.obj -MD -MP -MF src/$(DEPDIR)/ccr-symkey.Tpo -c -o src/ccr-symkey.obj `if test -f 'src/symkey.cpp'; then $(CYGPATH_W) 'src/symkey.cpp'; else $(CYGPATH_W) '$(srcdir)/src/symkey.cpp'; fi`
codecrypt-1.8/Makefile.in-892-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-symkey.Tpo src/$(DEPDIR)/ccr-symkey.Po
##############################################
codecrypt-1.8/Makefile.in-894-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:895:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-symkey.obj `if test -f 'src/symkey.cpp'; then $(CYGPATH_W) 'src/symkey.cpp'; else $(CYGPATH_W) '$(srcdir)/src/symkey.cpp'; fi`
codecrypt-1.8/Makefile.in-896-
codecrypt-1.8/Makefile.in-897-src/ccr-permutation.o: src/permutation.cpp
codecrypt-1.8/Makefile.in:898:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-permutation.o -MD -MP -MF src/$(DEPDIR)/ccr-permutation.Tpo -c -o src/ccr-permutation.o `test -f 'src/permutation.cpp' || echo '$(srcdir)/'`src/permutation.cpp
codecrypt-1.8/Makefile.in-899-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-permutation.Tpo src/$(DEPDIR)/ccr-permutation.Po
##############################################
codecrypt-1.8/Makefile.in-901-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:902:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-permutation.o `test -f 'src/permutation.cpp' || echo '$(srcdir)/'`src/permutation.cpp
codecrypt-1.8/Makefile.in-903-
codecrypt-1.8/Makefile.in-904-src/ccr-permutation.obj: src/permutation.cpp
codecrypt-1.8/Makefile.in:905:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-permutation.obj -MD -MP -MF src/$(DEPDIR)/ccr-permutation.Tpo -c -o src/ccr-permutation.obj `if test -f 'src/permutation.cpp'; then $(CYGPATH_W) 'src/permutation.cpp'; else $(CYGPATH_W) '$(srcdir)/src/permutation.cpp'; fi`
codecrypt-1.8/Makefile.in-906-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-permutation.Tpo src/$(DEPDIR)/ccr-permutation.Po
##############################################
codecrypt-1.8/Makefile.in-908-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:909:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-permutation.obj `if test -f 'src/permutation.cpp'; then $(CYGPATH_W) 'src/permutation.cpp'; else $(CYGPATH_W) '$(srcdir)/src/permutation.cpp'; fi`
codecrypt-1.8/Makefile.in-910-
codecrypt-1.8/Makefile.in-911-src/ccr-polynomial.o: src/polynomial.cpp
codecrypt-1.8/Makefile.in:912:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-polynomial.o -MD -MP -MF src/$(DEPDIR)/ccr-polynomial.Tpo -c -o src/ccr-polynomial.o `test -f 'src/polynomial.cpp' || echo '$(srcdir)/'`src/polynomial.cpp
codecrypt-1.8/Makefile.in-913-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-polynomial.Tpo src/$(DEPDIR)/ccr-polynomial.Po
##############################################
codecrypt-1.8/Makefile.in-915-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:916:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-polynomial.o `test -f 'src/polynomial.cpp' || echo '$(srcdir)/'`src/polynomial.cpp
codecrypt-1.8/Makefile.in-917-
codecrypt-1.8/Makefile.in-918-src/ccr-polynomial.obj: src/polynomial.cpp
codecrypt-1.8/Makefile.in:919:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-polynomial.obj -MD -MP -MF src/$(DEPDIR)/ccr-polynomial.Tpo -c -o src/ccr-polynomial.obj `if test -f 'src/polynomial.cpp'; then $(CYGPATH_W) 'src/polynomial.cpp'; else $(CYGPATH_W) '$(srcdir)/src/polynomial.cpp'; fi`
codecrypt-1.8/Makefile.in-920-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-polynomial.Tpo src/$(DEPDIR)/ccr-polynomial.Po
##############################################
codecrypt-1.8/Makefile.in-922-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:923:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-polynomial.obj `if test -f 'src/polynomial.cpp'; then $(CYGPATH_W) 'src/polynomial.cpp'; else $(CYGPATH_W) '$(srcdir)/src/polynomial.cpp'; fi`
codecrypt-1.8/Makefile.in-924-
codecrypt-1.8/Makefile.in-925-src/ccr-chacha.o: src/chacha.cpp
codecrypt-1.8/Makefile.in:926:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-chacha.o -MD -MP -MF src/$(DEPDIR)/ccr-chacha.Tpo -c -o src/ccr-chacha.o `test -f 'src/chacha.cpp' || echo '$(srcdir)/'`src/chacha.cpp
codecrypt-1.8/Makefile.in-927-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-chacha.Tpo src/$(DEPDIR)/ccr-chacha.Po
##############################################
codecrypt-1.8/Makefile.in-929-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:930:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-chacha.o `test -f 'src/chacha.cpp' || echo '$(srcdir)/'`src/chacha.cpp
codecrypt-1.8/Makefile.in-931-
codecrypt-1.8/Makefile.in-932-src/ccr-chacha.obj: src/chacha.cpp
codecrypt-1.8/Makefile.in:933:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-chacha.obj -MD -MP -MF src/$(DEPDIR)/ccr-chacha.Tpo -c -o src/ccr-chacha.obj `if test -f 'src/chacha.cpp'; then $(CYGPATH_W) 'src/chacha.cpp'; else $(CYGPATH_W) '$(srcdir)/src/chacha.cpp'; fi`
codecrypt-1.8/Makefile.in-934-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-chacha.Tpo src/$(DEPDIR)/ccr-chacha.Po
##############################################
codecrypt-1.8/Makefile.in-936-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:937:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-chacha.obj `if test -f 'src/chacha.cpp'; then $(CYGPATH_W) 'src/chacha.cpp'; else $(CYGPATH_W) '$(srcdir)/src/chacha.cpp'; fi`
codecrypt-1.8/Makefile.in-938-
codecrypt-1.8/Makefile.in-939-src/ccr-privfile.o: src/privfile.cpp
codecrypt-1.8/Makefile.in:940:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-privfile.o -MD -MP -MF src/$(DEPDIR)/ccr-privfile.Tpo -c -o src/ccr-privfile.o `test -f 'src/privfile.cpp' || echo '$(srcdir)/'`src/privfile.cpp
codecrypt-1.8/Makefile.in-941-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-privfile.Tpo src/$(DEPDIR)/ccr-privfile.Po
##############################################
codecrypt-1.8/Makefile.in-943-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:944:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-privfile.o `test -f 'src/privfile.cpp' || echo '$(srcdir)/'`src/privfile.cpp
codecrypt-1.8/Makefile.in-945-
codecrypt-1.8/Makefile.in-946-src/ccr-privfile.obj: src/privfile.cpp
codecrypt-1.8/Makefile.in:947:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-privfile.obj -MD -MP -MF src/$(DEPDIR)/ccr-privfile.Tpo -c -o src/ccr-privfile.obj `if test -f 'src/privfile.cpp'; then $(CYGPATH_W) 'src/privfile.cpp'; else $(CYGPATH_W) '$(srcdir)/src/privfile.cpp'; fi`
codecrypt-1.8/Makefile.in-948-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-privfile.Tpo src/$(DEPDIR)/ccr-privfile.Po
##############################################
codecrypt-1.8/Makefile.in-950-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:951:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-privfile.obj `if test -f 'src/privfile.cpp'; then $(CYGPATH_W) 'src/privfile.cpp'; else $(CYGPATH_W) '$(srcdir)/src/privfile.cpp'; fi`
codecrypt-1.8/Makefile.in-952-
codecrypt-1.8/Makefile.in-953-src/ccr-envelope.o: src/envelope.cpp
codecrypt-1.8/Makefile.in:954:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-envelope.o -MD -MP -MF src/$(DEPDIR)/ccr-envelope.Tpo -c -o src/ccr-envelope.o `test -f 'src/envelope.cpp' || echo '$(srcdir)/'`src/envelope.cpp
codecrypt-1.8/Makefile.in-955-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-envelope.Tpo src/$(DEPDIR)/ccr-envelope.Po
##############################################
codecrypt-1.8/Makefile.in-957-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:958:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-envelope.o `test -f 'src/envelope.cpp' || echo '$(srcdir)/'`src/envelope.cpp
codecrypt-1.8/Makefile.in-959-
codecrypt-1.8/Makefile.in-960-src/ccr-envelope.obj: src/envelope.cpp
codecrypt-1.8/Makefile.in:961:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-envelope.obj -MD -MP -MF src/$(DEPDIR)/ccr-envelope.Tpo -c -o src/ccr-envelope.obj `if test -f 'src/envelope.cpp'; then $(CYGPATH_W) 'src/envelope.cpp'; else $(CYGPATH_W) '$(srcdir)/src/envelope.cpp'; fi`
codecrypt-1.8/Makefile.in-962-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-envelope.Tpo src/$(DEPDIR)/ccr-envelope.Po
##############################################
codecrypt-1.8/Makefile.in-964-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:965:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-envelope.obj `if test -f 'src/envelope.cpp'; then $(CYGPATH_W) 'src/envelope.cpp'; else $(CYGPATH_W) '$(srcdir)/src/envelope.cpp'; fi`
codecrypt-1.8/Makefile.in-966-
codecrypt-1.8/Makefile.in-967-src/ccr-fft.o: src/fft.cpp
codecrypt-1.8/Makefile.in:968:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-fft.o -MD -MP -MF src/$(DEPDIR)/ccr-fft.Tpo -c -o src/ccr-fft.o `test -f 'src/fft.cpp' || echo '$(srcdir)/'`src/fft.cpp
codecrypt-1.8/Makefile.in-969-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-fft.Tpo src/$(DEPDIR)/ccr-fft.Po
##############################################
codecrypt-1.8/Makefile.in-971-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:972:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-fft.o `test -f 'src/fft.cpp' || echo '$(srcdir)/'`src/fft.cpp
codecrypt-1.8/Makefile.in-973-
codecrypt-1.8/Makefile.in-974-src/ccr-fft.obj: src/fft.cpp
codecrypt-1.8/Makefile.in:975:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-fft.obj -MD -MP -MF src/$(DEPDIR)/ccr-fft.Tpo -c -o src/ccr-fft.obj `if test -f 'src/fft.cpp'; then $(CYGPATH_W) 'src/fft.cpp'; else $(CYGPATH_W) '$(srcdir)/src/fft.cpp'; fi`
codecrypt-1.8/Makefile.in-976-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-fft.Tpo src/$(DEPDIR)/ccr-fft.Po
##############################################
codecrypt-1.8/Makefile.in-978-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:979:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-fft.obj `if test -f 'src/fft.cpp'; then $(CYGPATH_W) 'src/fft.cpp'; else $(CYGPATH_W) '$(srcdir)/src/fft.cpp'; fi`
codecrypt-1.8/Makefile.in-980-
codecrypt-1.8/Makefile.in-981-src/ccr-fmtseq.o: src/fmtseq.cpp
codecrypt-1.8/Makefile.in:982:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-fmtseq.o -MD -MP -MF src/$(DEPDIR)/ccr-fmtseq.Tpo -c -o src/ccr-fmtseq.o `test -f 'src/fmtseq.cpp' || echo '$(srcdir)/'`src/fmtseq.cpp
codecrypt-1.8/Makefile.in-983-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-fmtseq.Tpo src/$(DEPDIR)/ccr-fmtseq.Po
##############################################
codecrypt-1.8/Makefile.in-985-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:986:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-fmtseq.o `test -f 'src/fmtseq.cpp' || echo '$(srcdir)/'`src/fmtseq.cpp
codecrypt-1.8/Makefile.in-987-
codecrypt-1.8/Makefile.in-988-src/ccr-fmtseq.obj: src/fmtseq.cpp
codecrypt-1.8/Makefile.in:989:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-fmtseq.obj -MD -MP -MF src/$(DEPDIR)/ccr-fmtseq.Tpo -c -o src/ccr-fmtseq.obj `if test -f 'src/fmtseq.cpp'; then $(CYGPATH_W) 'src/fmtseq.cpp'; else $(CYGPATH_W) '$(srcdir)/src/fmtseq.cpp'; fi`
codecrypt-1.8/Makefile.in-990-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-fmtseq.Tpo src/$(DEPDIR)/ccr-fmtseq.Po
##############################################
codecrypt-1.8/Makefile.in-992-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:993:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-fmtseq.obj `if test -f 'src/fmtseq.cpp'; then $(CYGPATH_W) 'src/fmtseq.cpp'; else $(CYGPATH_W) '$(srcdir)/src/fmtseq.cpp'; fi`
codecrypt-1.8/Makefile.in-994-
codecrypt-1.8/Makefile.in-995-src/ccr-gf2m.o: src/gf2m.cpp
codecrypt-1.8/Makefile.in:996:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-gf2m.o -MD -MP -MF src/$(DEPDIR)/ccr-gf2m.Tpo -c -o src/ccr-gf2m.o `test -f 'src/gf2m.cpp' || echo '$(srcdir)/'`src/gf2m.cpp
codecrypt-1.8/Makefile.in-997-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-gf2m.Tpo src/$(DEPDIR)/ccr-gf2m.Po
##############################################
codecrypt-1.8/Makefile.in-999-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:1000:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-gf2m.o `test -f 'src/gf2m.cpp' || echo '$(srcdir)/'`src/gf2m.cpp
codecrypt-1.8/Makefile.in-1001-
codecrypt-1.8/Makefile.in-1002-src/ccr-gf2m.obj: src/gf2m.cpp
codecrypt-1.8/Makefile.in:1003:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-gf2m.obj -MD -MP -MF src/$(DEPDIR)/ccr-gf2m.Tpo -c -o src/ccr-gf2m.obj `if test -f 'src/gf2m.cpp'; then $(CYGPATH_W) 'src/gf2m.cpp'; else $(CYGPATH_W) '$(srcdir)/src/gf2m.cpp'; fi`
codecrypt-1.8/Makefile.in-1004-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-gf2m.Tpo src/$(DEPDIR)/ccr-gf2m.Po
##############################################
codecrypt-1.8/Makefile.in-1006-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:1007:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-gf2m.obj `if test -f 'src/gf2m.cpp'; then $(CYGPATH_W) 'src/gf2m.cpp'; else $(CYGPATH_W) '$(srcdir)/src/gf2m.cpp'; fi`
codecrypt-1.8/Makefile.in-1008-
codecrypt-1.8/Makefile.in-1009-src/ccr-hash.o: src/hash.cpp
codecrypt-1.8/Makefile.in:1010:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-hash.o -MD -MP -MF src/$(DEPDIR)/ccr-hash.Tpo -c -o src/ccr-hash.o `test -f 'src/hash.cpp' || echo '$(srcdir)/'`src/hash.cpp
codecrypt-1.8/Makefile.in-1011-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-hash.Tpo src/$(DEPDIR)/ccr-hash.Po
##############################################
codecrypt-1.8/Makefile.in-1013-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:1014:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-hash.o `test -f 'src/hash.cpp' || echo '$(srcdir)/'`src/hash.cpp
codecrypt-1.8/Makefile.in-1015-
codecrypt-1.8/Makefile.in-1016-src/ccr-hash.obj: src/hash.cpp
codecrypt-1.8/Makefile.in:1017:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-hash.obj -MD -MP -MF src/$(DEPDIR)/ccr-hash.Tpo -c -o src/ccr-hash.obj `if test -f 'src/hash.cpp'; then $(CYGPATH_W) 'src/hash.cpp'; else $(CYGPATH_W) '$(srcdir)/src/hash.cpp'; fi`
codecrypt-1.8/Makefile.in-1018-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-hash.Tpo src/$(DEPDIR)/ccr-hash.Po
##############################################
codecrypt-1.8/Makefile.in-1020-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:1021:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-hash.obj `if test -f 'src/hash.cpp'; then $(CYGPATH_W) 'src/hash.cpp'; else $(CYGPATH_W) '$(srcdir)/src/hash.cpp'; fi`
codecrypt-1.8/Makefile.in-1022-
codecrypt-1.8/Makefile.in-1023-src/ccr-hashfile.o: src/hashfile.cpp
codecrypt-1.8/Makefile.in:1024:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-hashfile.o -MD -MP -MF src/$(DEPDIR)/ccr-hashfile.Tpo -c -o src/ccr-hashfile.o `test -f 'src/hashfile.cpp' || echo '$(srcdir)/'`src/hashfile.cpp
codecrypt-1.8/Makefile.in-1025-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-hashfile.Tpo src/$(DEPDIR)/ccr-hashfile.Po
##############################################
codecrypt-1.8/Makefile.in-1027-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:1028:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-hashfile.o `test -f 'src/hashfile.cpp' || echo '$(srcdir)/'`src/hashfile.cpp
codecrypt-1.8/Makefile.in-1029-
codecrypt-1.8/Makefile.in-1030-src/ccr-hashfile.obj: src/hashfile.cpp
codecrypt-1.8/Makefile.in:1031:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-hashfile.obj -MD -MP -MF src/$(DEPDIR)/ccr-hashfile.Tpo -c -o src/ccr-hashfile.obj `if test -f 'src/hashfile.cpp'; then $(CYGPATH_W) 'src/hashfile.cpp'; else $(CYGPATH_W) '$(srcdir)/src/hashfile.cpp'; fi`
codecrypt-1.8/Makefile.in-1032-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-hashfile.Tpo src/$(DEPDIR)/ccr-hashfile.Po
##############################################
codecrypt-1.8/Makefile.in-1034-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:1035:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-hashfile.obj `if test -f 'src/hashfile.cpp'; then $(CYGPATH_W) 'src/hashfile.cpp'; else $(CYGPATH_W) '$(srcdir)/src/hashfile.cpp'; fi`
codecrypt-1.8/Makefile.in-1036-
codecrypt-1.8/Makefile.in-1037-src/ccr-sencode.o: src/sencode.cpp
codecrypt-1.8/Makefile.in:1038:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-sencode.o -MD -MP -MF src/$(DEPDIR)/ccr-sencode.Tpo -c -o src/ccr-sencode.o `test -f 'src/sencode.cpp' || echo '$(srcdir)/'`src/sencode.cpp
codecrypt-1.8/Makefile.in-1039-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-sencode.Tpo src/$(DEPDIR)/ccr-sencode.Po
##############################################
codecrypt-1.8/Makefile.in-1041-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:1042:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-sencode.o `test -f 'src/sencode.cpp' || echo '$(srcdir)/'`src/sencode.cpp
codecrypt-1.8/Makefile.in-1043-
codecrypt-1.8/Makefile.in-1044-src/ccr-sencode.obj: src/sencode.cpp
codecrypt-1.8/Makefile.in:1045:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-sencode.obj -MD -MP -MF src/$(DEPDIR)/ccr-sencode.Tpo -c -o src/ccr-sencode.obj `if test -f 'src/sencode.cpp'; then $(CYGPATH_W) 'src/sencode.cpp'; else $(CYGPATH_W) '$(srcdir)/src/sencode.cpp'; fi`
codecrypt-1.8/Makefile.in-1046-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-sencode.Tpo src/$(DEPDIR)/ccr-sencode.Po
##############################################
codecrypt-1.8/Makefile.in-1048-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:1049:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-sencode.obj `if test -f 'src/sencode.cpp'; then $(CYGPATH_W) 'src/sencode.cpp'; else $(CYGPATH_W) '$(srcdir)/src/sencode.cpp'; fi`
codecrypt-1.8/Makefile.in-1050-
codecrypt-1.8/Makefile.in-1051-src/ccr-iohelpers.o: src/iohelpers.cpp
codecrypt-1.8/Makefile.in:1052:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-iohelpers.o -MD -MP -MF src/$(DEPDIR)/ccr-iohelpers.Tpo -c -o src/ccr-iohelpers.o `test -f 'src/iohelpers.cpp' || echo '$(srcdir)/'`src/iohelpers.cpp
codecrypt-1.8/Makefile.in-1053-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-iohelpers.Tpo src/$(DEPDIR)/ccr-iohelpers.Po
##############################################
codecrypt-1.8/Makefile.in-1055-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:1056:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-iohelpers.o `test -f 'src/iohelpers.cpp' || echo '$(srcdir)/'`src/iohelpers.cpp
codecrypt-1.8/Makefile.in-1057-
codecrypt-1.8/Makefile.in-1058-src/ccr-iohelpers.obj: src/iohelpers.cpp
codecrypt-1.8/Makefile.in:1059:@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -MT src/ccr-iohelpers.obj -MD -MP -MF src/$(DEPDIR)/ccr-iohelpers.Tpo -c -o src/ccr-iohelpers.obj `if test -f 'src/iohelpers.cpp'; then $(CYGPATH_W) 'src/iohelpers.cpp'; else $(CYGPATH_W) '$(srcdir)/src/iohelpers.cpp'; fi`
codecrypt-1.8/Makefile.in-1060-@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) src/$(DEPDIR)/ccr-iohelpers.Tpo src/$(DEPDIR)/ccr-iohelpers.Po
##############################################
codecrypt-1.8/Makefile.in-1062-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
codecrypt-1.8/Makefile.in:1063:@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(ccr_CPPFLAGS) $(CPPFLAGS) $(ccr_CXXFLAGS) $(CXXFLAGS) -c -o src/ccr-iohelpers.obj `if test -f 'src/iohelpers.cpp'; then $(CYGPATH_W) 'src/iohelpers.cpp'; else $(CYGPATH_W) '$(srcdir)/src/iohelpers.cpp'; fi`
codecrypt-1.8/Makefile.in-1064-
##############################################
codecrypt-1.8/Makefile.in-1077- test -n "$(man1dir)" \
codecrypt-1.8/Makefile.in:1078: && test -n "`echo $$list1$$list2`" \
codecrypt-1.8/Makefile.in-1079- || exit 0; \
##############################################
codecrypt-1.8/Makefile.in-1146-GTAGS:
codecrypt-1.8/Makefile.in:1147: here=`$(am__cd) $(top_builddir) && pwd` \
codecrypt-1.8/Makefile.in-1148- && $(am__cd) $(top_srcdir) \
##############################################
codecrypt-1.8/Makefile.in-1178- test -d "$(distdir)" || mkdir "$(distdir)"
codecrypt-1.8/Makefile.in:1179: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
codecrypt-1.8/Makefile.in:1180: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
codecrypt-1.8/Makefile.in-1181- list='$(DISTFILES)'; \
##############################################
codecrypt-1.8/Makefile.in-1192- if test -d $$d/$$file; then \
codecrypt-1.8/Makefile.in:1193: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
codecrypt-1.8/Makefile.in-1194- if test -d "$(distdir)/$$file"; then \
##############################################
codecrypt-1.8/Makefile.in-1278- test -d $(distdir)/_build || exit 0; \
codecrypt-1.8/Makefile.in:1279: dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
codecrypt-1.8/Makefile.in-1280- && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
##############################################
codecrypt-1.8/Makefile.in-1322- }; \
codecrypt-1.8/Makefile.in:1323: test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
codecrypt-1.8/Makefile.in-1324- || { echo "ERROR: files left after uninstall:" ; \
##############################################
codecrypt-1.8/Makefile.in-1334- fi
codecrypt-1.8/Makefile.in:1335: @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
codecrypt-1.8/Makefile.in-1336- || { echo "ERROR: files left in build directory after distclean:" ; \
##############################################
codecrypt-1.8/compile-67- mingw/*)
codecrypt-1.8/compile:68: file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
codecrypt-1.8/compile-69- ;;
codecrypt-1.8/compile-70- cygwin/*)
codecrypt-1.8/compile:71: file=`cygpath -m "$file" || echo "$file"`
codecrypt-1.8/compile-72- ;;
codecrypt-1.8/compile-73- wine/*)
codecrypt-1.8/compile:74: file=`winepath -w "$file" || echo "$file"`
codecrypt-1.8/compile-75- ;;
##############################################
codecrypt-1.8/compile-309-# Name of file we expect compiler to create.
codecrypt-1.8/compile:310:cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
codecrypt-1.8/compile-311-
##############################################
codecrypt-1.8/compile-315-# object file name, since that is what matters with a parallel build.
codecrypt-1.8/compile:316:lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
codecrypt-1.8/compile-317-while true; do
##############################################
codecrypt-1.8/config.guess-34-
codecrypt-1.8/config.guess:35:me=`echo "$0" | sed -e 's,.*/,,'`
codecrypt-1.8/config.guess-36-
##############################################
codecrypt-1.8/config.guess-102-: ${TMPDIR=/tmp} ;
codecrypt-1.8/config.guess:103: { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
codecrypt-1.8/config.guess-104- { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
##############################################
codecrypt-1.8/config.guess-151- EOF
codecrypt-1.8/config.guess:152: eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC' | sed 's, ,,g'`
codecrypt-1.8/config.guess-153- ;;
##############################################
codecrypt-1.8/config.guess-181- earmv*)
codecrypt-1.8/config.guess:182: arch=`echo ${UNAME_MACHINE_ARCH} | sed -e 's,^e\(armv[0-9]\).*$,\1,'`
codecrypt-1.8/config.guess:183: endian=`echo ${UNAME_MACHINE_ARCH} | sed -ne 's,^.*\(eb\)$,\1,p'`
codecrypt-1.8/config.guess-184- machine=${arch}${endian}-unknown
##############################################
codecrypt-1.8/config.guess-213- expr='s/^earmv[0-9]/-eabi/;s/eb$//'
codecrypt-1.8/config.guess:214: abi=`echo ${UNAME_MACHINE_ARCH} | sed -e "$expr"`
codecrypt-1.8/config.guess-215- ;;
##############################################
codecrypt-1.8/config.guess-226- *)
codecrypt-1.8/config.guess:227: release=`echo ${UNAME_RELEASE} | sed -e 's/[-_].*//' | cut -d. -f1,2`
codecrypt-1.8/config.guess-228- ;;
##############################################
codecrypt-1.8/config.guess-264- *4.0)
codecrypt-1.8/config.guess:265: UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
codecrypt-1.8/config.guess-266- ;;
codecrypt-1.8/config.guess-267- *5.*)
codecrypt-1.8/config.guess:268: UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
codecrypt-1.8/config.guess-269- ;;
##############################################
codecrypt-1.8/config.guess-274- # types through head -n 1, so we only detect the type of CPU 0.
codecrypt-1.8/config.guess:275: ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
codecrypt-1.8/config.guess-276- case "$ALPHA_CPU_TYPE" in
##############################################
codecrypt-1.8/config.guess-312- # 1.2 uses "1.2" for uname -r.
codecrypt-1.8/config.guess:313: echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`
codecrypt-1.8/config.guess-314- # Reset EXIT trap before exiting to avoid spurious non-zero exit code.
##############################################
codecrypt-1.8/config.guess-372- s390x:SunOS:*:*)
codecrypt-1.8/config.guess:373: echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
codecrypt-1.8/config.guess-374- exit ;;
codecrypt-1.8/config.guess-375- sun4H:SunOS:5.*:*)
codecrypt-1.8/config.guess:376: echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
codecrypt-1.8/config.guess-377- exit ;;
codecrypt-1.8/config.guess-378- sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
codecrypt-1.8/config.guess:379: echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
codecrypt-1.8/config.guess-380- exit ;;
##############################################
codecrypt-1.8/config.guess-397- fi
codecrypt-1.8/config.guess:398: echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
codecrypt-1.8/config.guess-399- exit ;;
##############################################
codecrypt-1.8/config.guess-403- # it's likely to be more like Solaris than SunOS4.
codecrypt-1.8/config.guess:404: echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
codecrypt-1.8/config.guess-405- exit ;;
##############################################
codecrypt-1.8/config.guess-412- # Japanese Language versions have a version number like `4.1.3-JL'.
codecrypt-1.8/config.guess:413: echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
codecrypt-1.8/config.guess-414- exit ;;
##############################################
codecrypt-1.8/config.guess-418- sun*:*:4.2BSD:*)
codecrypt-1.8/config.guess:419: UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
codecrypt-1.8/config.guess-420- test "x${UNAME_RELEASE}" = x && UNAME_RELEASE=3
##############################################
codecrypt-1.8/config.guess-500- $CC_FOR_BUILD -o $dummy $dummy.c &&
codecrypt-1.8/config.guess:501: dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
codecrypt-1.8/config.guess:502: SYSTEM_NAME=`$dummy $dummyarg` &&
codecrypt-1.8/config.guess-503- { echo "$SYSTEM_NAME"; exit; }
##############################################
codecrypt-1.8/config.guess-556- *:IRIX*:*:*)
codecrypt-1.8/config.guess:557: echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
codecrypt-1.8/config.guess-558- exit ;;
##############################################
codecrypt-1.8/config.guess-586-EOF
codecrypt-1.8/config.guess:587: if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
codecrypt-1.8/config.guess-588- then
##############################################
codecrypt-1.8/config.guess-599- *:AIX:*:[4567])
codecrypt-1.8/config.guess:600: IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
codecrypt-1.8/config.guess-601- if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
##############################################
codecrypt-1.8/config.guess-635- 9000/[34678]??:HP-UX:*:*)
codecrypt-1.8/config.guess:636: HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
codecrypt-1.8/config.guess-637- case "${UNAME_MACHINE}" in
##############################################
codecrypt-1.8/config.guess-689-EOF
codecrypt-1.8/config.guess:690: (CCOPTS="" $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
codecrypt-1.8/config.guess-691- test -z "$HP_ARCH" && HP_ARCH=hppa
##############################################
codecrypt-1.8/config.guess-717- ia64:HP-UX:*:*)
codecrypt-1.8/config.guess:718: HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
codecrypt-1.8/config.guess-719- echo ia64-hp-hpux${HPUX_REV}
##############################################
codecrypt-1.8/config.guess-747-EOF
codecrypt-1.8/config.guess:748: $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
codecrypt-1.8/config.guess-749- { echo "$SYSTEM_NAME"; exit; }
##############################################
codecrypt-1.8/config.guess-818- FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'`
codecrypt-1.8/config.guess:819: FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
codecrypt-1.8/config.guess-820- echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
##############################################
codecrypt-1.8/config.guess-823- FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'`
codecrypt-1.8/config.guess:824: FUJITSU_REL=`echo ${UNAME_RELEASE} | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/ /_/'`
codecrypt-1.8/config.guess-825- echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
##############################################
codecrypt-1.8/config.guess-839- amd64)
codecrypt-1.8/config.guess:840: echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
codecrypt-1.8/config.guess-841- *)
codecrypt-1.8/config.guess:842: echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
codecrypt-1.8/config.guess-843- esac
##############################################
codecrypt-1.8/config.guess-897- prep*:SunOS:5.*:*)
codecrypt-1.8/config.guess:898: echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
codecrypt-1.8/config.guess-899- exit ;;
##############################################
codecrypt-1.8/config.guess-901- # the GNU system
codecrypt-1.8/config.guess:902: echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-${LIBC}`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
codecrypt-1.8/config.guess-903- exit ;;
##############################################
codecrypt-1.8/config.guess-905- # other systems with GNU libc and userland
codecrypt-1.8/config.guess:906: echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr "[:upper:]" "[:lower:]"``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-${LIBC}
codecrypt-1.8/config.guess-907- exit ;;
##############################################
codecrypt-1.8/config.guess-999-EOF
codecrypt-1.8/config.guess:1000: eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
codecrypt-1.8/config.guess-1001- test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; }
##############################################
codecrypt-1.8/config.guess-1099- i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
codecrypt-1.8/config.guess:1100: UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
codecrypt-1.8/config.guess-1101- if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
##############################################
codecrypt-1.8/config.guess-1302- fi
codecrypt-1.8/config.guess:1303: if test `echo "$UNAME_RELEASE" | sed -e 's/\..*//'` -le 10 ; then
codecrypt-1.8/config.guess-1304- if [ "$CC_FOR_BUILD" != no_compiler_found ]; then
##############################################
codecrypt-1.8/config.guess-1387- *:DragonFly:*:*)
codecrypt-1.8/config.guess:1388: echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
codecrypt-1.8/config.guess-1389- exit ;;
##############################################
codecrypt-1.8/config.guess-1400- i*86:skyos:*:*)
codecrypt-1.8/config.guess:1401: echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE} | sed -e 's/ .*$//'`
codecrypt-1.8/config.guess-1402- exit ;;
##############################################
codecrypt-1.8/config.sub-52-
codecrypt-1.8/config.sub:53:me=`echo "$0" | sed -e 's,.*/,,'`
codecrypt-1.8/config.sub-54-
##############################################
codecrypt-1.8/config.sub-114-# Here we must recognize all the valid KERNEL-OS combinations.
codecrypt-1.8/config.sub:115:maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
codecrypt-1.8/config.sub-116-case $maybe_os in
##############################################
codecrypt-1.8/config.sub-122- os=-$maybe_os
codecrypt-1.8/config.sub:123: basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
codecrypt-1.8/config.sub-124- ;;
##############################################
codecrypt-1.8/config.sub-126- os=-linux-android
codecrypt-1.8/config.sub:127: basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown
codecrypt-1.8/config.sub-128- ;;
codecrypt-1.8/config.sub-129- *)
codecrypt-1.8/config.sub:130: basic_machine=`echo $1 | sed 's/-[^-]*$//'`
codecrypt-1.8/config.sub-131- if [ $basic_machine != $1 ]
codecrypt-1.8/config.sub:132: then os=`echo $1 | sed 's/.*-/-/'`
codecrypt-1.8/config.sub-133- else os=; fi
##############################################
codecrypt-1.8/config.sub-180- os=-sco5v6
codecrypt-1.8/config.sub:181: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
codecrypt-1.8/config.sub-182- ;;
##############################################
codecrypt-1.8/config.sub-184- os=-sco3.2v5
codecrypt-1.8/config.sub:185: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
codecrypt-1.8/config.sub-186- ;;
##############################################
codecrypt-1.8/config.sub-188- os=-sco3.2v4
codecrypt-1.8/config.sub:189: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
codecrypt-1.8/config.sub-190- ;;
codecrypt-1.8/config.sub-191- -sco3.2.[4-9]*)
codecrypt-1.8/config.sub:192: os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
codecrypt-1.8/config.sub:193: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
codecrypt-1.8/config.sub-194- ;;
##############################################
codecrypt-1.8/config.sub-196- # Don't forget version if it is 3.2v4 or newer.
codecrypt-1.8/config.sub:197: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
codecrypt-1.8/config.sub-198- ;;
##############################################
codecrypt-1.8/config.sub-200- # Don't forget version if it is 3.2v4 or newer.
codecrypt-1.8/config.sub:201: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
codecrypt-1.8/config.sub-202- ;;
##############################################
codecrypt-1.8/config.sub-204- os=-sco3.2v2
codecrypt-1.8/config.sub:205: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
codecrypt-1.8/config.sub-206- ;;
codecrypt-1.8/config.sub-207- -udk*)
codecrypt-1.8/config.sub:208: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
codecrypt-1.8/config.sub-209- ;;
##############################################
codecrypt-1.8/config.sub-211- os=-isc2.2
codecrypt-1.8/config.sub:212: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
codecrypt-1.8/config.sub-213- ;;
##############################################
codecrypt-1.8/config.sub-217- -isc*)
codecrypt-1.8/config.sub:218: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
codecrypt-1.8/config.sub-219- ;;
##############################################
codecrypt-1.8/config.sub-229- -ptx*)
codecrypt-1.8/config.sub:230: basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
codecrypt-1.8/config.sub-231- ;;
codecrypt-1.8/config.sub-232- -windowsnt*)
codecrypt-1.8/config.sub:233: os=`echo $os | sed -e 's/windowsnt/winnt/'`
codecrypt-1.8/config.sub-234- ;;
##############################################
codecrypt-1.8/config.sub-367- *-*-*)
codecrypt-1.8/config.sub:368: echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
codecrypt-1.8/config.sub-369- exit 1
##############################################
codecrypt-1.8/config.sub-495- amd64-*)
codecrypt-1.8/config.sub:496: basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
codecrypt-1.8/config.sub-497- ;;
##############################################
codecrypt-1.8/config.sub-540- blackfin-*)
codecrypt-1.8/config.sub:541: basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
codecrypt-1.8/config.sub-542- os=-linux
##############################################
codecrypt-1.8/config.sub-548- c54x-*)
codecrypt-1.8/config.sub:549: basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'`
codecrypt-1.8/config.sub-550- ;;
codecrypt-1.8/config.sub-551- c55x-*)
codecrypt-1.8/config.sub:552: basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'`
codecrypt-1.8/config.sub-553- ;;
codecrypt-1.8/config.sub-554- c6x-*)
codecrypt-1.8/config.sub:555: basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'`
codecrypt-1.8/config.sub-556- ;;
##############################################
codecrypt-1.8/config.sub-652- e500v[12]-*)
codecrypt-1.8/config.sub:653: basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
codecrypt-1.8/config.sub-654- os=$os"spe"
##############################################
codecrypt-1.8/config.sub-759- i*86v32)
codecrypt-1.8/config.sub:760: basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
codecrypt-1.8/config.sub-761- os=-sysv32
##############################################
codecrypt-1.8/config.sub-763- i*86v4*)
codecrypt-1.8/config.sub:764: basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
codecrypt-1.8/config.sub-765- os=-sysv4
##############################################
codecrypt-1.8/config.sub-767- i*86v)
codecrypt-1.8/config.sub:768: basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
codecrypt-1.8/config.sub-769- os=-sysv
##############################################
codecrypt-1.8/config.sub-771- i*86sol2)
codecrypt-1.8/config.sub:772: basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
codecrypt-1.8/config.sub-773- os=-solaris2
##############################################
codecrypt-1.8/config.sub-797- leon-*|leon[3-9]-*)
codecrypt-1.8/config.sub:798: basic_machine=sparc-`echo $basic_machine | sed 's/-.*//'`
codecrypt-1.8/config.sub-799- ;;
##############################################
codecrypt-1.8/config.sub-804- m68knommu-*)
codecrypt-1.8/config.sub:805: basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
codecrypt-1.8/config.sub-806- os=-linux
##############################################
codecrypt-1.8/config.sub-841- mips3*-*)
codecrypt-1.8/config.sub:842: basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
codecrypt-1.8/config.sub-843- ;;
codecrypt-1.8/config.sub-844- mips3*)
codecrypt-1.8/config.sub:845: basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
codecrypt-1.8/config.sub-846- ;;
##############################################
codecrypt-1.8/config.sub-863- ms1-*)
codecrypt-1.8/config.sub:864: basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
codecrypt-1.8/config.sub-865- ;;
##############################################
codecrypt-1.8/config.sub-982- parisc-*)
codecrypt-1.8/config.sub:983: basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
codecrypt-1.8/config.sub-984- os=-linux
##############################################
codecrypt-1.8/config.sub-998- pc98-*)
codecrypt-1.8/config.sub:999: basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
codecrypt-1.8/config.sub-1000- ;;
##############################################
codecrypt-1.8/config.sub-1013- pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
codecrypt-1.8/config.sub:1014: basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
codecrypt-1.8/config.sub-1015- ;;
codecrypt-1.8/config.sub-1016- pentiumpro-* | p6-* | 6x86-* | athlon-*)
codecrypt-1.8/config.sub:1017: basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
codecrypt-1.8/config.sub-1018- ;;
codecrypt-1.8/config.sub-1019- pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
codecrypt-1.8/config.sub:1020: basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
codecrypt-1.8/config.sub-1021- ;;
codecrypt-1.8/config.sub-1022- pentium4-*)
codecrypt-1.8/config.sub:1023: basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
codecrypt-1.8/config.sub-1024- ;;
##############################################
codecrypt-1.8/config.sub-1032- ppc-* | ppcbe-*)
codecrypt-1.8/config.sub:1033: basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
codecrypt-1.8/config.sub-1034- ;;
##############################################
codecrypt-1.8/config.sub-1038- ppcle-* | powerpclittle-*)
codecrypt-1.8/config.sub:1039: basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
codecrypt-1.8/config.sub-1040- ;;
##############################################
codecrypt-1.8/config.sub-1042- ;;
codecrypt-1.8/config.sub:1043: ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
codecrypt-1.8/config.sub-1044- ;;
##############################################
codecrypt-1.8/config.sub-1048- ppc64le-* | powerpc64little-*)
codecrypt-1.8/config.sub:1049: basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
codecrypt-1.8/config.sub-1050- ;;
##############################################
codecrypt-1.8/config.sub-1131- strongarm-* | thumb-*)
codecrypt-1.8/config.sub:1132: basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'`
codecrypt-1.8/config.sub-1133- ;;
##############################################
codecrypt-1.8/config.sub-1261- xscale-* | xscalee[bl]-*)
codecrypt-1.8/config.sub:1262: basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'`
codecrypt-1.8/config.sub-1263- ;;
##############################################
codecrypt-1.8/config.sub-1338- *)
codecrypt-1.8/config.sub:1339: echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
codecrypt-1.8/config.sub-1340- exit 1
##############################################
codecrypt-1.8/config.sub-1346- *-digital*)
codecrypt-1.8/config.sub:1347: basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
codecrypt-1.8/config.sub-1348- ;;
codecrypt-1.8/config.sub-1349- *-commodore*)
codecrypt-1.8/config.sub:1350: basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
codecrypt-1.8/config.sub-1351- ;;
##############################################
codecrypt-1.8/config.sub-1367- -solaris1 | -solaris1.*)
codecrypt-1.8/config.sub:1368: os=`echo $os | sed -e 's|solaris1|sunos4|'`
codecrypt-1.8/config.sub-1369- ;;
##############################################
codecrypt-1.8/config.sub-1379- -gnu/linux*)
codecrypt-1.8/config.sub:1380: os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
codecrypt-1.8/config.sub-1381- ;;
##############################################
codecrypt-1.8/config.sub-1426- -nto*)
codecrypt-1.8/config.sub:1427: os=`echo $os | sed -e 's|nto|nto-qnx|'`
codecrypt-1.8/config.sub-1428- ;;
##############################################
codecrypt-1.8/config.sub-1433- -mac*)
codecrypt-1.8/config.sub:1434: os=`echo $os | sed -e 's|mac|macos|'`
codecrypt-1.8/config.sub-1435- ;;
##############################################
codecrypt-1.8/config.sub-1439- -linux*)
codecrypt-1.8/config.sub:1440: os=`echo $os | sed -e 's|linux|linux-gnu|'`
codecrypt-1.8/config.sub-1441- ;;
codecrypt-1.8/config.sub-1442- -sunos5*)
codecrypt-1.8/config.sub:1443: os=`echo $os | sed -e 's|sunos5|solaris2|'`
codecrypt-1.8/config.sub-1444- ;;
codecrypt-1.8/config.sub-1445- -sunos6*)
codecrypt-1.8/config.sub:1446: os=`echo $os | sed -e 's|sunos6|solaris3|'`
codecrypt-1.8/config.sub-1447- ;;
##############################################
codecrypt-1.8/config.sub-1494- -sinix5.*)
codecrypt-1.8/config.sub:1495: os=`echo $os | sed -e 's|sinix|sysv|'`
codecrypt-1.8/config.sub-1496- ;;
##############################################
codecrypt-1.8/config.sub-1549- # Get rid of the `-' at the beginning of $os.
codecrypt-1.8/config.sub:1550: os=`echo $os | sed 's/[^-]*-//'`
codecrypt-1.8/config.sub:1551: echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
codecrypt-1.8/config.sub-1552- exit 1
##############################################
codecrypt-1.8/config.sub-1812- esac
codecrypt-1.8/config.sub:1813: basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
codecrypt-1.8/config.sub-1814- ;;
##############################################
codecrypt-1.8/depcomp-64- case $1 in
codecrypt-1.8/depcomp:65: */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;;
codecrypt-1.8/depcomp-66- *) dir=;;
##############################################
codecrypt-1.8/depcomp-73-{
codecrypt-1.8/depcomp:74: base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'`
codecrypt-1.8/depcomp-75-}
##############################################
codecrypt-1.8/depcomp-126- sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
codecrypt-1.8/depcomp:127:tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
codecrypt-1.8/depcomp-128-
##############################################
codecrypt-1.8/depcomp-405- sleep 1
codecrypt-1.8/depcomp:406: i=`expr $i - 1`
codecrypt-1.8/depcomp-407- done
codecrypt-1.8/depcomp-408- fi
codecrypt-1.8/depcomp:409: i=`expr $i - 1`
codecrypt-1.8/depcomp-410- done
##############################################
codecrypt-1.8/depcomp-425- # Do two passes, one to just change these to
codecrypt-1.8/depcomp:426: # `$object: dependent.h' and one to simply `dependent.h:'.
codecrypt-1.8/depcomp-427- sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
##############################################
codecrypt-1.8/depcomp-659- done
codecrypt-1.8/depcomp:660: obj_suffix=`echo "$object" | sed 's/^.*\././'`
codecrypt-1.8/depcomp-661- touch "$tmpdepfile"
##############################################
codecrypt-1.8/install-sh-234- fi
codecrypt-1.8/install-sh:235: cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
codecrypt-1.8/install-sh-236- *)
##############################################
codecrypt-1.8/install-sh-281- dstdir=$dst
codecrypt-1.8/install-sh:282: dst=$dstdir/`basename "$src"`
codecrypt-1.8/install-sh-283- dstdir_status=0
codecrypt-1.8/install-sh-284- else
codecrypt-1.8/install-sh:285: dstdir=`dirname "$dst"`
codecrypt-1.8/install-sh-286- test -d "$dstdir"
##############################################
codecrypt-1.8/install-sh-344- test_tmpdir="$tmpdir/a"
codecrypt-1.8/install-sh:345: ls_ld_tmpdir=`ls -ld "$test_tmpdir"`
codecrypt-1.8/install-sh-346- case $ls_ld_tmpdir in
##############################################
codecrypt-1.8/install-sh-351- $mkdirprog -m$different_mode -p -- "$test_tmpdir" && {
codecrypt-1.8/install-sh:352: ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"`
codecrypt-1.8/install-sh-353- test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
##############################################
codecrypt-1.8/install-sh-409- case $prefix in
codecrypt-1.8/install-sh:410: *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
codecrypt-1.8/install-sh-411- *) qprefix=$prefix;;
##############################################
codecrypt-1.8/install-sh-458- if $copy_on_change &&
codecrypt-1.8/install-sh:459: old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
codecrypt-1.8/install-sh:460: new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
codecrypt-1.8/install-sh-461- set -f &&
##############################################
codecrypt-1.8/ltmain.sh-103-#
codecrypt-1.8/ltmain.sh:104:# . `echo "$0" | ${SED-sed} 's|[^/]*$||'`/build-aux/funclib.sh
codecrypt-1.8/ltmain.sh-105-#
##############################################
codecrypt-1.8/ltmain.sh-202- func_executable_p "$_G_path_prog" || continue
codecrypt-1.8/ltmain.sh:203: case `"$_G_path_prog" --version 2>&1` in
codecrypt-1.8/ltmain.sh-204- *GNU*) func_path_progs_result=$_G_path_prog _G_path_prog_found=: ;;
##############################################
codecrypt-1.8/ltmain.sh-249- diff conftest.out conftest.nl >/dev/null 2>&1 || break
codecrypt-1.8/ltmain.sh:250: _G_count=`expr $_G_count + 1`
codecrypt-1.8/ltmain.sh-251- if test "$_G_count" -gt "$_G_path_prog_max"; then
##############################################
codecrypt-1.8/ltmain.sh-285- diff conftest.out conftest.nl >/dev/null 2>&1 || break
codecrypt-1.8/ltmain.sh:286: _G_count=`expr $_G_count + 1`
codecrypt-1.8/ltmain.sh-287- if test "$_G_count" -gt "$_G_path_prog_max"; then
##############################################
codecrypt-1.8/ltmain.sh-410-# The name of this program.
codecrypt-1.8/ltmain.sh:411:progname=`$ECHO "$progpath" |$SED "$sed_basename"`
codecrypt-1.8/ltmain.sh-412-
##############################################
codecrypt-1.8/ltmain.sh-416- *[\\/]*)
codecrypt-1.8/ltmain.sh:417: progdir=`$ECHO "$progpath" |$SED "$sed_dirname"`
codecrypt-1.8/ltmain.sh:418: progdir=`cd "$progdir" && pwd`
codecrypt-1.8/ltmain.sh-419- progpath=$progdir/$progname
##############################################
codecrypt-1.8/ltmain.sh-610-
codecrypt-1.8/ltmain.sh:611: eval _G_current_value='`$ECHO $'$1'`'
codecrypt-1.8/ltmain.sh:612: _G_delim=`expr "$2" : '\(.\)'`
codecrypt-1.8/ltmain.sh-613-
##############################################
codecrypt-1.8/ltmain.sh-639-
codecrypt-1.8/ltmain.sh:640: func_arith_result=`expr "$@"`
codecrypt-1.8/ltmain.sh-641- }
##############################################
codecrypt-1.8/ltmain.sh-660- # ...otherwise fall back to using sed.
codecrypt-1.8/ltmain.sh:661: _b='func_basename_result=`$ECHO "$1" |$SED "$sed_basename"`'
codecrypt-1.8/ltmain.sh:662: _d='func_dirname_result=`$ECHO "$1" |$SED "$sed_dirname"`
codecrypt-1.8/ltmain.sh-663- if test "X$func_dirname_result" = "X$1"; then
##############################################
codecrypt-1.8/ltmain.sh-757- test -n "$_G_tc" && {
codecrypt-1.8/ltmain.sh:758: _G_esc_tc=`$ECHO "$_G_tc" | $SED "$sed_make_literal_regex"`
codecrypt-1.8/ltmain.sh:759: _G_indent=`$ECHO "$_G_indent" | $SED "s|$_G_esc_tc||g"`
codecrypt-1.8/ltmain.sh-760- }
codecrypt-1.8/ltmain.sh-761- done
codecrypt-1.8/ltmain.sh:762: _G_indent="$progname: "`echo "$_G_indent" | $SED 's|.| |g'`" " ## exclude from sc_prohibit_nested_quotes
codecrypt-1.8/ltmain.sh-763-
##############################################
codecrypt-1.8/ltmain.sh-831-
codecrypt-1.8/ltmain.sh:832: func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
codecrypt-1.8/ltmain.sh-833- }
##############################################
codecrypt-1.8/ltmain.sh-863- # ...otherwise throw away the child directory and loop
codecrypt-1.8/ltmain.sh:864: _G_directory_path=`$ECHO "$_G_directory_path" | $SED -e "$sed_dirname"`
codecrypt-1.8/ltmain.sh-865- done
codecrypt-1.8/ltmain.sh:866: _G_dir_list=`$ECHO "$_G_dir_list" | $SED 's|:*$||'`
codecrypt-1.8/ltmain.sh-867-
##############################################
codecrypt-1.8/ltmain.sh-901- # If mktemp works, use that first and foremost
codecrypt-1.8/ltmain.sh:902: _G_tmpdir=`mktemp -d "$_G_template-XXXXXXXX" 2>/dev/null`
codecrypt-1.8/ltmain.sh-903-
##############################################
codecrypt-1.8/ltmain.sh-1111- *[\\\`\"\$]*)
codecrypt-1.8/ltmain.sh:1112: _G_unquoted_arg=`printf '%s\n' "$1" |$SED "$sed_quote_subst"` ;;
codecrypt-1.8/ltmain.sh-1113- *)
##############################################
codecrypt-1.8/ltmain.sh-1198- case $2 in
codecrypt-1.8/ltmain.sh:1199: .*) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%\\\\$2\$%%"`;;
codecrypt-1.8/ltmain.sh:1200: *) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%$2\$%%"`;;
codecrypt-1.8/ltmain.sh-1201- esac
##############################################
codecrypt-1.8/ltmain.sh-1271- [0-9]* | *[!a-zA-Z0-9_]*)
codecrypt-1.8/ltmain.sh:1272: func_tr_sh_result=`$ECHO "$1" | $SED -e 's/^\([0-9]\)/_\1/' -e 's/[^a-zA-Z0-9_]/_/g'`
codecrypt-1.8/ltmain.sh-1273- ;;
##############################################
codecrypt-1.8/ltmain.sh-1358-
codecrypt-1.8/ltmain.sh:1359: test "x$1" = x`func_sort_ver "$1" "$2" | $SED 1q`
codecrypt-1.8/ltmain.sh-1360-}
##############################################
codecrypt-1.8/ltmain.sh-1424-# The default options also support '--debug', which will turn on shell
codecrypt-1.8/ltmain.sh:1425:# execution tracing (see the comment above debug_cmd below for another
codecrypt-1.8/ltmain.sh-1426-# use), and '--verbose' and the func_verbose function to allow your script
##############################################
codecrypt-1.8/ltmain.sh-1517-
codecrypt-1.8/ltmain.sh:1518: eval ${1}_hooks='`$ECHO "\$'$1'_hooks" |$SED "s| '$2'||"`'
codecrypt-1.8/ltmain.sh-1519-}
##############################################
codecrypt-1.8/ltmain.sh-1870-
codecrypt-1.8/ltmain.sh:1871: func_split_equals_lhs=`expr "x$1" : 'x\([^=]*\)'`
codecrypt-1.8/ltmain.sh-1872- func_split_equals_rhs=
codecrypt-1.8/ltmain.sh-1873- test "x$func_split_equals_lhs" = "x$1" \
codecrypt-1.8/ltmain.sh:1874: || func_split_equals_rhs=`expr "x$1" : 'x[^=]*=\(.*\)$'`
codecrypt-1.8/ltmain.sh-1875- }
##############################################
codecrypt-1.8/ltmain.sh-1898-
codecrypt-1.8/ltmain.sh:1899: func_split_short_opt_name=`expr "x$1" : 'x-\(.\)'`
codecrypt-1.8/ltmain.sh:1900: func_split_short_opt_arg=`expr "x$1" : 'x-.\(.*\)$'`
codecrypt-1.8/ltmain.sh-1901- }
##############################################
codecrypt-1.8/ltmain.sh-2071- version: $progname $scriptversion Debian-2.4.6-2
codecrypt-1.8/ltmain.sh:2072: automake: `($AUTOMAKE --version) 2>/dev/null |$SED 1q`
codecrypt-1.8/ltmain.sh:2073: autoconf: `($AUTOCONF --version) 2>/dev/null |$SED 1q`
codecrypt-1.8/ltmain.sh-2074-
##############################################
codecrypt-1.8/ltmain.sh-2110- {
codecrypt-1.8/ltmain.sh:2111: func_lo2o_result=`$ECHO "$1" | $SED "$lo2o"`
codecrypt-1.8/ltmain.sh-2112- }
##############################################
codecrypt-1.8/ltmain.sh-2115- {
codecrypt-1.8/ltmain.sh:2116: func_xform_result=`$ECHO "$1" | $SED 's|\.[^.]*$|.lo|'`
codecrypt-1.8/ltmain.sh-2117- }
##############################################
codecrypt-1.8/ltmain.sh-2206- # quotes we have to do it in 2 steps:
codecrypt-1.8/ltmain.sh:2207: extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
codecrypt-1.8/ltmain.sh-2208- eval "$extractedcf"
##############################################
codecrypt-1.8/ltmain.sh-2659- done
codecrypt-1.8/ltmain.sh:2660: CC_expanded=`func_echo_all $CC`
codecrypt-1.8/ltmain.sh:2661: CC_quoted_expanded=`func_echo_all $CC_quoted`
codecrypt-1.8/ltmain.sh-2662- case $@ in
##############################################
codecrypt-1.8/ltmain.sh-2672- # Evaluate the configuration.
codecrypt-1.8/ltmain.sh:2673: eval "`$SED -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
codecrypt-1.8/ltmain.sh-2674- CC_quoted=
##############################################
codecrypt-1.8/ltmain.sh-2678- done
codecrypt-1.8/ltmain.sh:2679: CC_expanded=`func_echo_all $CC`
codecrypt-1.8/ltmain.sh:2680: CC_quoted_expanded=`func_echo_all $CC_quoted`
codecrypt-1.8/ltmain.sh-2681- case "$@ " in
##############################################
codecrypt-1.8/ltmain.sh-2770- # zero AND non-empty stdout, which explains the odd construction:
codecrypt-1.8/ltmain.sh:2771: func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
codecrypt-1.8/ltmain.sh-2772- if test "$?" -eq 0 && test -n "$func_convert_core_file_wine_to_w32_tmp"; then
##############################################
codecrypt-1.8/ltmain.sh-2838- if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
codecrypt-1.8/ltmain.sh:2839: func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
codecrypt-1.8/ltmain.sh-2840- if test "$?" -ne 0; then
##############################################
codecrypt-1.8/ltmain.sh-3009- # LT_CYGPATH in this case.
codecrypt-1.8/ltmain.sh:3010: func_to_host_file_result=`cygpath -m "$1"`
codecrypt-1.8/ltmain.sh-3011- fi
##############################################
codecrypt-1.8/ltmain.sh-3166- func_to_host_path_tmp1=$func_stripname_result
codecrypt-1.8/ltmain.sh:3167: func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
codecrypt-1.8/ltmain.sh-3168- func_convert_path_check : ";" \
##############################################
codecrypt-1.8/ltmain.sh-3376- *.[cCFSifmso] | \
codecrypt-1.8/ltmain.sh:3377: *.ada | *.adb | *.ads | *.asm | \
codecrypt-1.8/ltmain.sh-3378- *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
##############################################
codecrypt-1.8/ltmain.sh-3453- if test no = "$compiler_c_o"; then
codecrypt-1.8/ltmain.sh:3454: output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.$objext
codecrypt-1.8/ltmain.sh-3455- lockfile=$output_obj.lock
##############################################
codecrypt-1.8/ltmain.sh-3472-*** ERROR, $lockfile exists and contains:
codecrypt-1.8/ltmain.sh:3473:`cat $lockfile 2>/dev/null`
codecrypt-1.8/ltmain.sh-3474-
##############################################
codecrypt-1.8/ltmain.sh-3520- if test warn = "$need_locks" &&
codecrypt-1.8/ltmain.sh:3521: test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
codecrypt-1.8/ltmain.sh-3522- $ECHO "\
codecrypt-1.8/ltmain.sh-3523-*** ERROR, $lockfile contains:
codecrypt-1.8/ltmain.sh:3524:`cat $lockfile 2>/dev/null`
codecrypt-1.8/ltmain.sh-3525-
##############################################
codecrypt-1.8/ltmain.sh-3569- if test warn = "$need_locks" &&
codecrypt-1.8/ltmain.sh:3570: test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
codecrypt-1.8/ltmain.sh-3571- $ECHO "\
codecrypt-1.8/ltmain.sh-3572-*** ERROR, $lockfile contains:
codecrypt-1.8/ltmain.sh:3573:`cat $lockfile 2>/dev/null`
codecrypt-1.8/ltmain.sh-3574-
##############################################
codecrypt-1.8/ltmain.sh-3895- # Get the absolute pathname.
codecrypt-1.8/ltmain.sh:3896: absdir=`cd "$dir" && pwd`
codecrypt-1.8/ltmain.sh-3897- test -n "$absdir" && dir=$absdir
##############################################
codecrypt-1.8/ltmain.sh-3994- if test -n "$lt_sysroot"; then
codecrypt-1.8/ltmain.sh:3995: sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
codecrypt-1.8/ltmain.sh-3996- sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
##############################################
codecrypt-1.8/ltmain.sh-4278- # Determine the prefix the user has applied to our future dir.
codecrypt-1.8/ltmain.sh:4279: inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
codecrypt-1.8/ltmain.sh-4280-
##############################################
codecrypt-1.8/ltmain.sh-4291- # Stick the inst_prefix_dir data into the link command.
codecrypt-1.8/ltmain.sh:4292: relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
codecrypt-1.8/ltmain.sh-4293- else
codecrypt-1.8/ltmain.sh:4294: relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
codecrypt-1.8/ltmain.sh-4295- fi
##############################################
codecrypt-1.8/ltmain.sh-4458- fi
codecrypt-1.8/ltmain.sh:4459: libfile=$libdir/`$ECHO "$lib" | $SED 's%^.*/%%g'`
codecrypt-1.8/ltmain.sh-4460- if test -n "$libdir" && test ! -f "$libfile"; then
##############################################
codecrypt-1.8/ltmain.sh-4477- # Replace the output file specification.
codecrypt-1.8/ltmain.sh:4478: relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
codecrypt-1.8/ltmain.sh-4479-
##############################################
codecrypt-1.8/ltmain.sh-4496- # Install the binary that we compiled earlier.
codecrypt-1.8/ltmain.sh:4497: file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`
codecrypt-1.8/ltmain.sh-4498- fi
##############################################
codecrypt-1.8/ltmain.sh-4570- my_pic_p=${3-false}
codecrypt-1.8/ltmain.sh:4571: my_prefix=`$ECHO "$my_originator" | $SED 's%[^a-zA-Z0-9]%_%g'`
codecrypt-1.8/ltmain.sh-4572- my_dlsyms=
##############################################
codecrypt-1.8/ltmain.sh-4628- # Add our own program objects to the symbol list.
codecrypt-1.8/ltmain.sh:4629: progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
codecrypt-1.8/ltmain.sh-4630- for progfile in $progfiles; do
##############################################
codecrypt-1.8/ltmain.sh-4690- # Use subshell, to avoid clobbering current variable values
codecrypt-1.8/ltmain.sh:4691: dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
codecrypt-1.8/ltmain.sh-4692- if test -n "$dlprefile_dlname"; then
##############################################
codecrypt-1.8/ltmain.sh-4859- if test -f "$output_objdir/$my_outputname.def"; then
codecrypt-1.8/ltmain.sh:4860: compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
codecrypt-1.8/ltmain.sh:4861: finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
codecrypt-1.8/ltmain.sh-4862- else
codecrypt-1.8/ltmain.sh:4863: compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
codecrypt-1.8/ltmain.sh:4864: finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
codecrypt-1.8/ltmain.sh-4865- fi
##############################################
codecrypt-1.8/ltmain.sh-4867- *)
codecrypt-1.8/ltmain.sh:4868: compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
codecrypt-1.8/ltmain.sh:4869: finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
codecrypt-1.8/ltmain.sh-4870- ;;
##############################################
codecrypt-1.8/ltmain.sh-4882- # Nullify the symbol file.
codecrypt-1.8/ltmain.sh:4883: compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
codecrypt-1.8/ltmain.sh:4884: finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
codecrypt-1.8/ltmain.sh-4885- fi
##############################################
codecrypt-1.8/ltmain.sh-4896- func_to_tool_file "$1" func_convert_file_msys_to_w32
codecrypt-1.8/ltmain.sh:4897: func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
codecrypt-1.8/ltmain.sh-4898- test -n "$func_cygming_gnu_implib_tmp"
##############################################
codecrypt-1.8/ltmain.sh-4909- func_to_tool_file "$1" func_convert_file_msys_to_w32
codecrypt-1.8/ltmain.sh:4910: func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
codecrypt-1.8/ltmain.sh-4911- test -n "$func_cygming_ms_implib_tmp"
##############################################
codecrypt-1.8/ltmain.sh-4925- win32_libid_type=unknown
codecrypt-1.8/ltmain.sh:4926: win32_fileres=`file -L $1 2>/dev/null`
codecrypt-1.8/ltmain.sh-4927- case $win32_fileres in
##############################################
codecrypt-1.8/ltmain.sh-4990-
codecrypt-1.8/ltmain.sh:4991: sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
codecrypt-1.8/ltmain.sh-4992-}
##############################################
codecrypt-1.8/ltmain.sh-5008-
codecrypt-1.8/ltmain.sh:5009: match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
codecrypt-1.8/ltmain.sh-5010- $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
##############################################
codecrypt-1.8/ltmain.sh-5072- # binutils import library
codecrypt-1.8/ltmain.sh:5073: sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
codecrypt-1.8/ltmain.sh-5074- elif func_cygming_ms_implib_p "$1"; then
codecrypt-1.8/ltmain.sh-5075- # ms-generated import library
codecrypt-1.8/ltmain.sh:5076: sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
codecrypt-1.8/ltmain.sh-5077- else
##############################################
codecrypt-1.8/ltmain.sh-5156- darwin_base_archive=$func_basename_result
codecrypt-1.8/ltmain.sh:5157: darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
codecrypt-1.8/ltmain.sh-5158- if test -n "$darwin_arches"; then
codecrypt-1.8/ltmain.sh:5159: darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
codecrypt-1.8/ltmain.sh-5160- darwin_arch=
##############################################
codecrypt-1.8/ltmain.sh-5170- ## Okay now we've a bunch of thin objects, gotta fatten them up :)
codecrypt-1.8/ltmain.sh:5171: darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$sed_basename" | sort -u`
codecrypt-1.8/ltmain.sh-5172- darwin_file=
##############################################
codecrypt-1.8/ltmain.sh-5174- for darwin_file in $darwin_filelist; do
codecrypt-1.8/ltmain.sh:5175: darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
codecrypt-1.8/ltmain.sh-5176- $LIPO -create -output "$darwin_file" $darwin_files
##############################################
codecrypt-1.8/ltmain.sh-5189- esac
codecrypt-1.8/ltmain.sh:5190: my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
codecrypt-1.8/ltmain.sh-5191- done
##############################################
codecrypt-1.8/ltmain.sh-5260-
codecrypt-1.8/ltmain.sh:5261: qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"`
codecrypt-1.8/ltmain.sh-5262- $ECHO "\
##############################################
codecrypt-1.8/ltmain.sh-5295- --lt-dump-script)
codecrypt-1.8/ltmain.sh:5296: lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
codecrypt-1.8/ltmain.sh-5297- test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
codecrypt-1.8/ltmain.sh:5298: lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
codecrypt-1.8/ltmain.sh-5299- cat \"\$lt_dump_D/\$lt_dump_F\"
##############################################
codecrypt-1.8/ltmain.sh-5322- \$ECHO \"$outputname:$output:\$LINENO: newargv[\$lt_dump_args_N]: \$lt_arg\"
codecrypt-1.8/ltmain.sh:5323: lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
codecrypt-1.8/ltmain.sh-5324- done
##############################################
codecrypt-1.8/ltmain.sh-5380- # Find the directory that this script lives in.
codecrypt-1.8/ltmain.sh:5381: thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
codecrypt-1.8/ltmain.sh-5382- test \"x\$thisdir\" = \"x\$file\" && thisdir=.
##############################################
codecrypt-1.8/ltmain.sh-5384- # Follow symbolic links until we get to the real thisdir.
codecrypt-1.8/ltmain.sh:5385: file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`
codecrypt-1.8/ltmain.sh-5386- while test -n \"\$file\"; do
codecrypt-1.8/ltmain.sh:5387: destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`
codecrypt-1.8/ltmain.sh-5388-
##############################################
codecrypt-1.8/ltmain.sh-5396-
codecrypt-1.8/ltmain.sh:5397: file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
codecrypt-1.8/ltmain.sh:5398: file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`
codecrypt-1.8/ltmain.sh-5399- done
##############################################
codecrypt-1.8/ltmain.sh-5410- case \"\$thisdir\" in
codecrypt-1.8/ltmain.sh:5411: *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;;
codecrypt-1.8/ltmain.sh-5412- $objdir ) thisdir=. ;;
##############################################
codecrypt-1.8/ltmain.sh-5416- # Try to get the absolute directory name.
codecrypt-1.8/ltmain.sh:5417: absdir=\`cd \"\$thisdir\" && pwd\`
codecrypt-1.8/ltmain.sh-5418- test -n \"\$absdir\" && thisdir=\"\$absdir\"
##############################################
codecrypt-1.8/ltmain.sh-5426- if test ! -f \"\$progdir/\$program\" ||
codecrypt-1.8/ltmain.sh:5427: { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | $SED 1q\`; \\
codecrypt-1.8/ltmain.sh-5428- test \"X\$file\" != \"X\$progdir/\$program\"; }; then
##############################################
codecrypt-1.8/ltmain.sh-5441- if test -n \"\$relink_command\"; then
codecrypt-1.8/ltmain.sh:5442: if relink_command_output=\`eval \$relink_command 2>&1\`; then :
codecrypt-1.8/ltmain.sh-5443- else
##############################################
codecrypt-1.8/ltmain.sh-5485- # The second colon is a workaround for a bug in BeOS R4 sed
codecrypt-1.8/ltmain.sh:5486: $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`
codecrypt-1.8/ltmain.sh-5487-
##############################################
codecrypt-1.8/ltmain.sh-6464-
codecrypt-1.8/ltmain.sh:6465: case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
codecrypt-1.8/ltmain.sh-6466- *import*) : ;;
##############################################
codecrypt-1.8/ltmain.sh-6712- moreargs=
codecrypt-1.8/ltmain.sh:6713: for fil in `cat "$save_arg"`
codecrypt-1.8/ltmain.sh-6714- do
##############################################
codecrypt-1.8/ltmain.sh-6973- *)
codecrypt-1.8/ltmain.sh:6974: absdir=`cd "$dir" && pwd`
codecrypt-1.8/ltmain.sh-6975- test -z "$absdir" && \
##############################################
codecrypt-1.8/ltmain.sh-6994- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
codecrypt-1.8/ltmain.sh:6995: testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'`
codecrypt-1.8/ltmain.sh-6996- case :$dllsearchpath: in
##############################################
codecrypt-1.8/ltmain.sh-7290- -Z*)
codecrypt-1.8/ltmain.sh:7291: if test os2 = "`expr $host : '.*\(os2\)'`"; then
codecrypt-1.8/ltmain.sh-7292- # OS/2 uses -Zxxx to specify OS/2-specific options
##############################################
codecrypt-1.8/ltmain.sh-7460- # get the directories listed in $shlibpath_var
codecrypt-1.8/ltmain.sh:7461: eval shlib_search_path=\`\$ECHO \"\$$shlibpath_var\" \| \$SED \'s/:/ /g\'\`
codecrypt-1.8/ltmain.sh-7462- else
##############################################
codecrypt-1.8/ltmain.sh-7779- set dummy $deplibs_check_method; shift
codecrypt-1.8/ltmain.sh:7780: match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
codecrypt-1.8/ltmain.sh-7781- if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
##############################################
codecrypt-1.8/ltmain.sh-7869- if test -n "$inherited_linker_flags"; then
codecrypt-1.8/ltmain.sh:7870: tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'`
codecrypt-1.8/ltmain.sh-7871- for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
##############################################
codecrypt-1.8/ltmain.sh-7877- fi
codecrypt-1.8/ltmain.sh:7878: dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
codecrypt-1.8/ltmain.sh-7879- if test lib,link = "$linkmode,$pass" ||
##############################################
codecrypt-1.8/ltmain.sh-7950- *)
codecrypt-1.8/ltmain.sh:7951: abs_ladir=`cd "$ladir" && pwd`
codecrypt-1.8/ltmain.sh-7952- if test -z "$abs_ladir"; then
##############################################
codecrypt-1.8/ltmain.sh-8203- shift
codecrypt-1.8/ltmain.sh:8204: libname=`eval "\\$ECHO \"$libname_spec\""`
codecrypt-1.8/ltmain.sh-8205- # use dlname if we got it. it's perfectly good, no?
##############################################
codecrypt-1.8/ltmain.sh-8495- *)
codecrypt-1.8/ltmain.sh:8496: absdir=`cd "$dir" && pwd`
codecrypt-1.8/ltmain.sh-8497- if test -z "$absdir"; then
##############################################
codecrypt-1.8/ltmain.sh-8506- depdepl=
codecrypt-1.8/ltmain.sh:8507: eval deplibrary_names=`$SED -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
codecrypt-1.8/ltmain.sh-8508- if test -n "$deplibrary_names"; then
##############################################
codecrypt-1.8/ltmain.sh-8513- depdepl=$absdir/$objdir/$depdepl
codecrypt-1.8/ltmain.sh:8514: darwin_install_name=`$OTOOL -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
codecrypt-1.8/ltmain.sh-8515- if test -z "$darwin_install_name"; then
codecrypt-1.8/ltmain.sh:8516: darwin_install_name=`$OTOOL64 -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
codecrypt-1.8/ltmain.sh-8517- fi
##############################################
codecrypt-1.8/ltmain.sh-8528- else
codecrypt-1.8/ltmain.sh:8529: eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
codecrypt-1.8/ltmain.sh-8530- test -z "$libdir" && \
##############################################
codecrypt-1.8/ltmain.sh-8551- else
codecrypt-1.8/ltmain.sh:8552: compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
codecrypt-1.8/ltmain.sh-8553- fi
##############################################
codecrypt-1.8/ltmain.sh-8640- linux*)
codecrypt-1.8/ltmain.sh:8641: case `$CC -V 2>&1 | sed 5q` in
codecrypt-1.8/ltmain.sh-8642- *Sun\ C*) # Sun C++ 5.9
##############################################
codecrypt-1.8/ltmain.sh-9048- removelist=
codecrypt-1.8/ltmain.sh:9049: tempremovelist=`$ECHO "$output_objdir/*"`
codecrypt-1.8/ltmain.sh-9050- for p in $tempremovelist; do
##############################################
codecrypt-1.8/ltmain.sh-9074- # Transform .lo files to .o files.
codecrypt-1.8/ltmain.sh:9075: oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; $lo2o" | $NL2SP`
codecrypt-1.8/ltmain.sh-9076- fi
##############################################
codecrypt-1.8/ltmain.sh-9079- #for path in $notinst_path; do
codecrypt-1.8/ltmain.sh:9080: # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"`
codecrypt-1.8/ltmain.sh:9081: # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"`
codecrypt-1.8/ltmain.sh:9082: # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"`
codecrypt-1.8/ltmain.sh-9083- #done
##############################################
codecrypt-1.8/ltmain.sh-9200- if test -n "$i"; then
codecrypt-1.8/ltmain.sh:9201: libname=`eval "\\$ECHO \"$libname_spec\""`
codecrypt-1.8/ltmain.sh:9202: deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
codecrypt-1.8/ltmain.sh-9203- set dummy $deplib_matches; shift
codecrypt-1.8/ltmain.sh-9204- deplib_match=$1
codecrypt-1.8/ltmain.sh:9205: if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0; then
codecrypt-1.8/ltmain.sh-9206- func_append newdeplibs " $i"
##############################################
codecrypt-1.8/ltmain.sh-9243- if test -n "$i"; then
codecrypt-1.8/ltmain.sh:9244: libname=`eval "\\$ECHO \"$libname_spec\""`
codecrypt-1.8/ltmain.sh:9245: deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
codecrypt-1.8/ltmain.sh-9246- set dummy $deplib_matches; shift
codecrypt-1.8/ltmain.sh-9247- deplib_match=$1
codecrypt-1.8/ltmain.sh:9248: if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0; then
codecrypt-1.8/ltmain.sh-9249- func_append newdeplibs " $i"
##############################################
codecrypt-1.8/ltmain.sh-9278- set dummy $deplibs_check_method; shift
codecrypt-1.8/ltmain.sh:9279: file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
codecrypt-1.8/ltmain.sh-9280- for a_deplib in $deplibs; do
##############################################
codecrypt-1.8/ltmain.sh-9293- if test -n "$a_deplib"; then
codecrypt-1.8/ltmain.sh:9294: libname=`eval "\\$ECHO \"$libname_spec\""`
codecrypt-1.8/ltmain.sh-9295- if test -n "$file_magic_glob"; then
codecrypt-1.8/ltmain.sh:9296: libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
codecrypt-1.8/ltmain.sh-9297- else
##############################################
codecrypt-1.8/ltmain.sh-9303- shopt -s nocaseglob
codecrypt-1.8/ltmain.sh:9304: potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
codecrypt-1.8/ltmain.sh-9305- $nocaseglob
codecrypt-1.8/ltmain.sh-9306- else
codecrypt-1.8/ltmain.sh:9307: potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
codecrypt-1.8/ltmain.sh-9308- fi
##############################################
codecrypt-1.8/ltmain.sh-9321- while test -h "$potlib" 2>/dev/null; do
codecrypt-1.8/ltmain.sh:9322: potliblink=`ls -ld $potlib | $SED 's/.* -> //'`
codecrypt-1.8/ltmain.sh-9323- case $potliblink in
codecrypt-1.8/ltmain.sh-9324- [\\/]* | [A-Za-z]:[\\/]*) potlib=$potliblink;;
codecrypt-1.8/ltmain.sh:9325: *) potlib=`$ECHO "$potlib" | $SED 's|[^/]*$||'`"$potliblink";;
codecrypt-1.8/ltmain.sh-9326- esac
##############################################
codecrypt-1.8/ltmain.sh-9362- set dummy $deplibs_check_method; shift
codecrypt-1.8/ltmain.sh:9363: match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
codecrypt-1.8/ltmain.sh-9364- for a_deplib in $deplibs; do
##############################################
codecrypt-1.8/ltmain.sh-9377- if test -n "$a_deplib"; then
codecrypt-1.8/ltmain.sh:9378: libname=`eval "\\$ECHO \"$libname_spec\""`
codecrypt-1.8/ltmain.sh-9379- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
codecrypt-1.8/ltmain.sh:9380: potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
codecrypt-1.8/ltmain.sh-9381- for potent_lib in $potential_libs; do
##############################################
codecrypt-1.8/ltmain.sh-9416- newdeplibs=
codecrypt-1.8/ltmain.sh:9417: tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
codecrypt-1.8/ltmain.sh-9418- if test yes = "$allow_libtool_libs_with_static_runtimes"; then
##############################################
codecrypt-1.8/ltmain.sh-9420- # can't use Xsed below, because $i might contain '/'
codecrypt-1.8/ltmain.sh:9421: tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s|$i||"`
codecrypt-1.8/ltmain.sh-9422- done
##############################################
codecrypt-1.8/ltmain.sh-9446- # On Rhapsody replace the C library with the System framework
codecrypt-1.8/ltmain.sh:9447: newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'`
codecrypt-1.8/ltmain.sh-9448- ;;
##############################################
codecrypt-1.8/ltmain.sh-9498- *-*-darwin*)
codecrypt-1.8/ltmain.sh:9499: newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
codecrypt-1.8/ltmain.sh:9500: new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
codecrypt-1.8/ltmain.sh:9501: deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
codecrypt-1.8/ltmain.sh-9502- ;;
##############################################
codecrypt-1.8/ltmain.sh-9625- # Use standard objects if they are pic
codecrypt-1.8/ltmain.sh:9626: test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP`
codecrypt-1.8/ltmain.sh-9627- test "X$libobjs" = "X " && libobjs=
##############################################
codecrypt-1.8/ltmain.sh-10139- eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
codecrypt-1.8/ltmain.sh:10140: test -n "$wl" || tmp_whole_archive_flags=`$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
codecrypt-1.8/ltmain.sh-10141- reload_conv_objs=$reload_objs\ $tmp_whole_archive_flags
##############################################
codecrypt-1.8/ltmain.sh-10154- # Create the old-style object.
codecrypt-1.8/ltmain.sh:10155: reload_objs=$objs$old_deplibs' '`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; /\.lib$/d; $lo2o" | $NL2SP`' '$reload_conv_objs
codecrypt-1.8/ltmain.sh-10156-
##############################################
codecrypt-1.8/ltmain.sh-10212- # On Rhapsody replace the C library is the System framework
codecrypt-1.8/ltmain.sh:10213: compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'`
codecrypt-1.8/ltmain.sh:10214: finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'`
codecrypt-1.8/ltmain.sh-10215- ;;
##############################################
codecrypt-1.8/ltmain.sh-10230- # Time to change all our "foo.ltframework" stuff back to "-framework foo"
codecrypt-1.8/ltmain.sh:10231: compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
codecrypt-1.8/ltmain.sh:10232: finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
codecrypt-1.8/ltmain.sh-10233- ;;
##############################################
codecrypt-1.8/ltmain.sh-10308- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
codecrypt-1.8/ltmain.sh:10309: testbindir=`$ECHO "$libdir" | $SED -e 's*/lib$*/bin*'`
codecrypt-1.8/ltmain.sh-10310- case :$dllsearchpath: in
##############################################
codecrypt-1.8/ltmain.sh-10368- # Transform all the library objects into standard objects.
codecrypt-1.8/ltmain.sh:10369: compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
codecrypt-1.8/ltmain.sh:10370: finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
codecrypt-1.8/ltmain.sh-10371- fi
##############################################
codecrypt-1.8/ltmain.sh-10396- # Replace the output file specification.
codecrypt-1.8/ltmain.sh:10397: compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
codecrypt-1.8/ltmain.sh-10398- link_command=$compile_command$compile_rpath
##############################################
codecrypt-1.8/ltmain.sh-10405- func_to_tool_file "$output"
codecrypt-1.8/ltmain.sh:10406: postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
codecrypt-1.8/ltmain.sh-10407- func_execute_cmds "$postlink_cmds" 'exit $?'
##############################################
codecrypt-1.8/ltmain.sh-10449- # Replace the output file specification.
codecrypt-1.8/ltmain.sh:10450: link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
codecrypt-1.8/ltmain.sh-10451- # Delete the old output file.
##############################################
codecrypt-1.8/ltmain.sh-10457- func_to_tool_file "$output"
codecrypt-1.8/ltmain.sh:10458: postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
codecrypt-1.8/ltmain.sh-10459- func_execute_cmds "$postlink_cmds" 'exit $?'
##############################################
codecrypt-1.8/ltmain.sh-10475- link_command=$finalize_var$compile_command$finalize_rpath
codecrypt-1.8/ltmain.sh:10476: relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
codecrypt-1.8/ltmain.sh-10477- ;;
##############################################
codecrypt-1.8/ltmain.sh-10488- # Replace the output file specification.
codecrypt-1.8/ltmain.sh:10489: link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
codecrypt-1.8/ltmain.sh-10490-
##############################################
codecrypt-1.8/ltmain.sh-10497- func_to_tool_file "$output_objdir/$outputname"
codecrypt-1.8/ltmain.sh:10498: postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
codecrypt-1.8/ltmain.sh-10499- func_execute_cmds "$postlink_cmds" 'exit $?'
##############################################
codecrypt-1.8/ltmain.sh-10518- relink_command="(cd `pwd`; $relink_command)"
codecrypt-1.8/ltmain.sh:10519: relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
codecrypt-1.8/ltmain.sh-10520- fi
##############################################
codecrypt-1.8/ltmain.sh-10764- relink_command="(cd `pwd`; $SHELL \"$progpath\" $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
codecrypt-1.8/ltmain.sh:10765: relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
codecrypt-1.8/ltmain.sh-10766- if test yes = "$hardcode_automatic"; then
##############################################
codecrypt-1.8/ltmain.sh-10785- func_resolve_sysroot "$deplib"
codecrypt-1.8/ltmain.sh:10786: eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
codecrypt-1.8/ltmain.sh-10787- test -z "$libdir" && \
##############################################
codecrypt-1.8/ltmain.sh-10811- name=$func_basename_result
codecrypt-1.8/ltmain.sh:10812: eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
codecrypt-1.8/ltmain.sh-10813- test -z "$libdir" && \
##############################################
codecrypt-1.8/ltmain.sh-10830- name=$func_basename_result
codecrypt-1.8/ltmain.sh:10831: eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
codecrypt-1.8/ltmain.sh-10832- test -z "$libdir" && \
##############################################
codecrypt-1.8/ltmain.sh-11149-# ### BEGIN LIBTOOL TAG CONFIG: disable-static
codecrypt-1.8/ltmain.sh:11150:build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
codecrypt-1.8/ltmain.sh-11151-# ### END LIBTOOL TAG CONFIG: disable-static