===========================================================
.___ __ __
_________________ __ __ __| _/|__|/ |_
/ ___\_` __ \__ \ | | \/ __ | | \\_ __\
/ /_/ > | \// __ \| | / /_/ | | || |
\___ /|__| (____ /____/\____ | |__||__|
/_____/ \/ \/
grep rough audit - static analysis tool
v2.8 written by @Wireghoul
=================================[justanotherhacker.com]===
glogic-2.6/configure-43-if test -z "$BASH_VERSION$ZSH_VERSION" \
glogic-2.6/configure:44: && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
glogic-2.6/configure-45- as_echo='print -r --'
glogic-2.6/configure-46- as_echo_n='print -rn --'
glogic-2.6/configure:47:elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
glogic-2.6/configure-48- as_echo='printf %s\n'
##############################################
glogic-2.6/configure-50-else
glogic-2.6/configure:51: if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
glogic-2.6/configure-52- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
##############################################
glogic-2.6/configure-60- expr "X$arg" : "X\\(.*\\)$as_nl";
glogic-2.6/configure:61: arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
glogic-2.6/configure-62- esac;
##############################################
glogic-2.6/configure-197- eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
glogic-2.6/configure:198: test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
glogic-2.6/configure-199-test \$(( 1 + 1 )) = 2 || exit 1"
##############################################
glogic-2.6/configure-324- case $as_dir in #(
glogic-2.6/configure:325: *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
glogic-2.6/configure-326- *) as_qdir=$as_dir;;
##############################################
glogic-2.6/configure-397- {
glogic-2.6/configure:398: as_val=`expr "$@" || test $? -eq 1`
glogic-2.6/configure-399- }
##############################################
glogic-2.6/configure-404-# ----------------------------------------
glogic-2.6/configure:405:# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
glogic-2.6/configure-406-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
##############################################
glogic-2.6/configure-467- eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
glogic-2.6/configure:468: test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
glogic-2.6/configure-469- # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
##############################################
glogic-2.6/configure-851- case $ac_option in
glogic-2.6/configure:852: *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
glogic-2.6/configure-853- *=) ac_optarg= ;;
##############################################
glogic-2.6/configure-895- -disable-* | --disable-*)
glogic-2.6/configure:896: ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
glogic-2.6/configure-897- # Reject names that are not valid shell variable names.
##############################################
glogic-2.6/configure-900- ac_useropt_orig=$ac_useropt
glogic-2.6/configure:901: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
glogic-2.6/configure-902- case $ac_user_opts in
##############################################
glogic-2.6/configure-921- -enable-* | --enable-*)
glogic-2.6/configure:922: ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
glogic-2.6/configure-923- # Reject names that are not valid shell variable names.
##############################################
glogic-2.6/configure-926- ac_useropt_orig=$ac_useropt
glogic-2.6/configure:927: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
glogic-2.6/configure-928- case $ac_user_opts in
##############################################
glogic-2.6/configure-1125- -with-* | --with-*)
glogic-2.6/configure:1126: ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
glogic-2.6/configure-1127- # Reject names that are not valid shell variable names.
##############################################
glogic-2.6/configure-1130- ac_useropt_orig=$ac_useropt
glogic-2.6/configure:1131: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
glogic-2.6/configure-1132- case $ac_user_opts in
##############################################
glogic-2.6/configure-1141- -without-* | --without-*)
glogic-2.6/configure:1142: ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
glogic-2.6/configure-1143- # Reject names that are not valid shell variable names.
##############################################
glogic-2.6/configure-1146- ac_useropt_orig=$ac_useropt
glogic-2.6/configure:1147: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
glogic-2.6/configure-1148- case $ac_user_opts in
##############################################
glogic-2.6/configure-1179- *=*)
glogic-2.6/configure:1180: ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
glogic-2.6/configure-1181- # Reject names that are not valid shell variable names.
##############################################
glogic-2.6/configure-1200-if test -n "$ac_prev"; then
glogic-2.6/configure:1201: ac_option=--`echo $ac_prev | sed 's/_/-/g'`
glogic-2.6/configure-1202- as_fn_error $? "missing argument to $ac_option"
##############################################
glogic-2.6/configure-1222- */ )
glogic-2.6/configure:1223: ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
glogic-2.6/configure-1224- eval $ac_var=\$ac_val;;
##############################################
glogic-2.6/configure-1257-ac_ls_di=`ls -di .` &&
glogic-2.6/configure:1258:ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
glogic-2.6/configure-1259- as_fn_error $? "working directory cannot be determined"
##############################################
glogic-2.6/configure-1313-case $srcdir in
glogic-2.6/configure:1314:*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
glogic-2.6/configure-1315-esac
##############################################
glogic-2.6/configure-1356-By default, \`make install' will install all the files in
glogic-2.6/configure:1357:\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
glogic-2.6/configure:1358:an installation prefix other than \`$ac_default_prefix' using \`--prefix',
glogic-2.6/configure-1359-for instance \`--prefix=\$HOME'.
##############################################
glogic-2.6/configure-1444-*)
glogic-2.6/configure:1445: ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
glogic-2.6/configure-1446- # A ".." for each directory in $ac_dir_suffix.
glogic-2.6/configure:1447: ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
glogic-2.6/configure-1448- case $ac_top_builddir_sub in
##############################################
glogic-2.6/configure-1928- *\'*)
glogic-2.6/configure:1929: ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
glogic-2.6/configure-1930- esac
##############################################
glogic-2.6/configure-2011- case $ac_val in
glogic-2.6/configure:2012: *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
glogic-2.6/configure-2013- esac
##############################################
glogic-2.6/configure-2026- case $ac_val in
glogic-2.6/configure:2027: *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
glogic-2.6/configure-2028- esac
##############################################
glogic-2.6/configure-2146- set,)
glogic-2.6/configure:2147: { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
glogic-2.6/configure:2148:$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
glogic-2.6/configure-2149- ac_cache_corrupted=: ;;
##############################################
glogic-2.6/configure-2157- # differences in whitespace do not lead to failure.
glogic-2.6/configure:2158: ac_old_val_w=`echo x $ac_old_val`
glogic-2.6/configure:2159: ac_new_val_w=`echo x $ac_new_val`
glogic-2.6/configure-2160- if test "$ac_old_val_w" != "$ac_new_val_w"; then
##############################################
glogic-2.6/configure-2177- case $ac_new_val in
glogic-2.6/configure:2178: *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
glogic-2.6/configure-2179- *) ac_arg=$ac_var=$ac_new_val ;;
##############################################
glogic-2.6/configure-2352-if (
glogic-2.6/configure:2353: set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
glogic-2.6/configure-2354- if test "$*" = "X"; then
glogic-2.6/configure-2355- # -L didn't work.
glogic-2.6/configure:2356: set X `ls -t "$srcdir/configure" conftest.file`
glogic-2.6/configure-2357- fi
##############################################
glogic-2.6/configure-2388-ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
glogic-2.6/configure:2389:program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
glogic-2.6/configure-2390-
glogic-2.6/configure-2391-# expand $ac_aux_dir to an absolute path
glogic-2.6/configure:2392:am_aux_dir=`cd $ac_aux_dir && pwd`
glogic-2.6/configure-2393-
##############################################
glogic-2.6/configure-2533- as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue
glogic-2.6/configure:2534: case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
glogic-2.6/configure-2535- 'mkdir (GNU coreutils) '* | \
##############################################
glogic-2.6/configure-2612-set x ${MAKE-make}
glogic-2.6/configure:2613:ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
glogic-2.6/configure-2614-if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
##############################################
glogic-2.6/configure-2622-# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
glogic-2.6/configure:2623:case `${MAKE-make} -f conftest.make 2>/dev/null` in
glogic-2.6/configure-2624- *@@@%%%=?*=@@@%%%*)
##############################################
glogic-2.6/configure-2649-
glogic-2.6/configure:2650:if test "`cd $srcdir && pwd`" != "`pwd`"; then
glogic-2.6/configure-2651- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
##############################################
glogic-2.6/configure-2831-else
glogic-2.6/configure:2832: am_cv_python_version=`$PYTHON -c "import sys; sys.stdout.write(sys.version[:3])"`
glogic-2.6/configure-2833-fi
##############################################
glogic-2.6/configure-2850-else
glogic-2.6/configure:2851: am_cv_python_platform=`$PYTHON -c "import sys; sys.stdout.write(sys.platform)"`
glogic-2.6/configure-2852-fi
##############################################
glogic-2.6/configure-2870- fi
glogic-2.6/configure:2871: am_cv_python_pythondir=`$PYTHON -c "import sys; from distutils import sysconfig; sys.stdout.write(sysconfig.get_python_lib(0,0,prefix='$am_py_prefix'))" 2>/dev/null`
glogic-2.6/configure-2872- case $am_cv_python_pythondir in
glogic-2.6/configure-2873- $am_py_prefix*)
glogic-2.6/configure:2874: am__strip_prefix=`echo "$am_py_prefix" | sed 's|.|.|g'`
glogic-2.6/configure:2875: am_cv_python_pythondir=`echo "$am_cv_python_pythondir" | sed "s,^$am__strip_prefix,$PYTHON_PREFIX,"`
glogic-2.6/configure-2876- ;;
##############################################
glogic-2.6/configure-2907- fi
glogic-2.6/configure:2908: am_cv_python_pyexecdir=`$PYTHON -c "import sys; from distutils import sysconfig; sys.stdout.write(sysconfig.get_python_lib(1,0,prefix='$am_py_exec_prefix'))" 2>/dev/null`
glogic-2.6/configure-2909- case $am_cv_python_pyexecdir in
glogic-2.6/configure-2910- $am_py_exec_prefix*)
glogic-2.6/configure:2911: am__strip_prefix=`echo "$am_py_exec_prefix" | sed 's|.|.|g'`
glogic-2.6/configure:2912: am_cv_python_pyexecdir=`echo "$am_cv_python_pyexecdir" | sed "s,^$am__strip_prefix,$PYTHON_EXEC_PREFIX,"`
glogic-2.6/configure-2913- ;;
##############################################
glogic-2.6/configure-2965-# Ignore all kinds of additional output from `make'.
glogic-2.6/configure:2966:case `$am_make -s -f confmf 2> /dev/null` in #(
glogic-2.6/configure-2967-*the\ am__doit\ target*)
##############################################
glogic-2.6/configure-2975- echo '.include "confinc"' > confmf
glogic-2.6/configure:2976: case `$am_make -s -f confmf 2> /dev/null` in #(
glogic-2.6/configure-2977- *the\ am__doit\ target*)
##############################################
glogic-2.6/configure-3354-$as_echo_n "checking whether the C compiler works... " >&6; }
glogic-2.6/configure:3355:ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
glogic-2.6/configure-3356-
##############################################
glogic-2.6/configure-3398- then :; else
glogic-2.6/configure:3399: ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
glogic-2.6/configure-3400- fi
##############################################
glogic-2.6/configure-3458- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
glogic-2.6/configure:3459: *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
glogic-2.6/configure-3460- break;;
##############################################
glogic-2.6/configure-3567- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
glogic-2.6/configure:3568: *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
glogic-2.6/configure-3569- break;;
##############################################
glogic-2.6/configure-3826- if test "$am_compiler_list" = ""; then
glogic-2.6/configure:3827: am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
glogic-2.6/configure-3828- fi
##############################################
glogic-2.6/configure-4083- # Check for GNU $ac_path_GREP
glogic-2.6/configure:4084:case `"$ac_path_GREP" --version 2>&1` in
glogic-2.6/configure-4085-*GNU*)
##############################################
glogic-2.6/configure-4149- # Check for GNU $ac_path_EGREP
glogic-2.6/configure:4150:case `"$ac_path_EGREP" --version 2>&1` in
glogic-2.6/configure-4151-*GNU*)
##############################################
glogic-2.6/configure-4310-do :
glogic-2.6/configure:4311: as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
glogic-2.6/configure-4312-ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
##############################################
glogic-2.6/configure-4315- cat >>confdefs.h <<_ACEOF
glogic-2.6/configure:4316:#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
glogic-2.6/configure-4317-_ACEOF
##############################################
glogic-2.6/configure-4741- if test -f $ac_dir/$ac_word; then
glogic-2.6/configure:4742: if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then
glogic-2.6/configure-4743- ac_cv_path_MSGFMT="$ac_dir/$ac_word"
##############################################
glogic-2.6/configure-4860- if test -f $ac_dir/$ac_word; then
glogic-2.6/configure:4861: if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then
glogic-2.6/configure-4862- ac_cv_path_XGETTEXT="$ac_dir/$ac_word"
##############################################
glogic-2.6/configure-5019- if test "x$srcdir" != "x."; then
glogic-2.6/configure:5020: if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
glogic-2.6/configure-5021- posrcprefix="$srcdir/"
##############################################
glogic-2.6/configure-5055-
glogic-2.6/configure:5056:INTLTOOL_REQUIRED_VERSION_AS_INT=`echo 0.35.0 | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'`
glogic-2.6/configure-5057-INTLTOOL_APPLIED_VERSION=`intltool-update --version | head -1 | cut -d" " -f3`
glogic-2.6/configure:5058:INTLTOOL_APPLIED_VERSION_AS_INT=`echo $INTLTOOL_APPLIED_VERSION | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'`
glogic-2.6/configure-5059-if test -n "0.35.0"; then
##############################################
glogic-2.6/configure-5495-fi
glogic-2.6/configure:5496:xgversion="`$XGETTEXT --version|grep '(GNU ' 2> /dev/null`"
glogic-2.6/configure:5497:mmversion="`$MSGMERGE --version|grep '(GNU ' 2> /dev/null`"
glogic-2.6/configure:5498:mfversion="`$MSGFMT --version|grep '(GNU ' 2> /dev/null`"
glogic-2.6/configure-5499-if test -z "$xgversion" -o -z "$mmversion" -o -z "$mfversion"; then
##############################################
glogic-2.6/configure-5551-else
glogic-2.6/configure:5552: IT_PERL_VERSION=`$INTLTOOL_PERL -e "printf '%vd', $^V"`
glogic-2.6/configure-5553- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $IT_PERL_VERSION" >&5
##############################################
glogic-2.6/configure-5558-$as_echo_n "checking for XML::Parser... " >&6; }
glogic-2.6/configure:5559: if `$INTLTOOL_PERL -e "require XML::Parser" 2>/dev/null`; then
glogic-2.6/configure-5560- { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
##############################################
glogic-2.6/configure-5611-
glogic-2.6/configure:5612:if test "`cd $srcdir && pwd`" != "`pwd`"; then
glogic-2.6/configure-5613- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
##############################################
glogic-2.6/configure-5701- if test "$am_compiler_list" = ""; then
glogic-2.6/configure:5702: am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
glogic-2.6/configure-5703- fi
##############################################
glogic-2.6/configure-5818- while true; do
glogic-2.6/configure:5819: new_full_var="`eval echo $full_var`"
glogic-2.6/configure-5820- if test "x$new_full_var" = "x$full_var"; then break; fi
##############################################
glogic-2.6/configure-5836- cd $srcdir && \
glogic-2.6/configure:5837: bzrrev=`$srcdir/missing --run bzr revno` \
glogic-2.6/configure-5838- || echo Failed to get revision number >&2 \
##############################################
glogic-2.6/configure-6072- if ! test -d "$$helpdir"; then $(mkinstalldirs) "$$helpdir"; fi; \
glogic-2.6/configure:6073: echo "$(INSTALL_DATA) $$d$$lc/$$f $$helpdir`basename $$f`"; \
glogic-2.6/configure:6074: $(INSTALL_DATA) "$$d$$lc/$$f" "$$helpdir`basename $$f`" || exit 1; \
glogic-2.6/configure-6075- done; done
glogic-2.6/configure-6076- @for f in $(_HELP_C_EXTRA); do \
glogic-2.6/configure:6077: lc=`dirname "$$f"`; lc=`basename "$$lc"`; \
glogic-2.6/configure-6078- if test -f "$$f"; then d=; else d="$(srcdir)/"; fi; \
##############################################
glogic-2.6/configure-6080- if ! test -d "$$helpdir"; then $(mkinstalldirs) "$$helpdir"; fi; \
glogic-2.6/configure:6081: echo "$(INSTALL_DATA) $$d$$f $$helpdir`basename $$f`"; \
glogic-2.6/configure:6082: $(INSTALL_DATA) "$$d$$f" "$$helpdir`basename $$f`" || exit 1; \
glogic-2.6/configure-6083- done
##############################################
glogic-2.6/configure-6087- helpdir="$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)/"; \
glogic-2.6/configure:6088: mdir=`dirname "$$f"`; \
glogic-2.6/configure-6089- if test "x$mdir" = "x."; then mdir=""; fi; \
##############################################
glogic-2.6/configure-6105- helpdir="$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)/"; \
glogic-2.6/configure:6106: echo "rm -f $$helpdir`basename $$f`"; \
glogic-2.6/configure:6107: rm -f "$$helpdir`basename $$f`"; \
glogic-2.6/configure-6108- done; done
glogic-2.6/configure-6109- @for f in $(_HELP_C_EXTRA); do \
glogic-2.6/configure:6110: lc=`dirname "$$f"`; lc=`basename "$$lc"`; \
glogic-2.6/configure-6111- helpdir="$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)/"; \
glogic-2.6/configure:6112: echo "rm -f $$helpdir`basename $$f`"; \
glogic-2.6/configure:6113: rm -f "$$helpdir`basename $$f`"; \
glogic-2.6/configure-6114- done
##############################################
glogic-2.6/configure-6254-'
glogic-2.6/configure:6255:DEFS=`sed -n "$ac_script" confdefs.h`
glogic-2.6/configure-6256-
##############################################
glogic-2.6/configure-6263- ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
glogic-2.6/configure:6264: ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
glogic-2.6/configure-6265- # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
##############################################
glogic-2.6/configure-6362-if test -z "$BASH_VERSION$ZSH_VERSION" \
glogic-2.6/configure:6363: && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
glogic-2.6/configure-6364- as_echo='print -r --'
glogic-2.6/configure-6365- as_echo_n='print -rn --'
glogic-2.6/configure:6366:elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
glogic-2.6/configure-6367- as_echo='printf %s\n'
##############################################
glogic-2.6/configure-6369-else
glogic-2.6/configure:6370: if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
glogic-2.6/configure-6371- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
##############################################
glogic-2.6/configure-6379- expr "X$arg" : "X\\(.*\\)$as_nl";
glogic-2.6/configure:6380: arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
glogic-2.6/configure-6381- esac;
##############################################
glogic-2.6/configure-6456-# ----------------------------------------
glogic-2.6/configure:6457:# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
glogic-2.6/configure-6458-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
##############################################
glogic-2.6/configure-6528- {
glogic-2.6/configure:6529: as_val=`expr "$@" || test $? -eq 1`
glogic-2.6/configure-6530- }
##############################################
glogic-2.6/configure-6632- case $as_dir in #(
glogic-2.6/configure:6633: *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
glogic-2.6/configure-6634- *) as_qdir=$as_dir;;
##############################################
glogic-2.6/configure-6758-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
glogic-2.6/configure:6759:ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
glogic-2.6/configure-6760-ac_cs_version="\\
##############################################
glogic-2.6/configure-6783- --*=?*)
glogic-2.6/configure:6784: ac_option=`expr "X$1" : 'X\([^=]*\)='`
glogic-2.6/configure:6785: ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
glogic-2.6/configure-6786- ac_shift=:
##############################################
glogic-2.6/configure-6788- --*=)
glogic-2.6/configure:6789: ac_option=`expr "X$1" : 'X\([^=]*\)='`
glogic-2.6/configure-6790- ac_optarg=
##############################################
glogic-2.6/configure-6812- case $ac_optarg in
glogic-2.6/configure:6813: *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
glogic-2.6/configure-6814- '') as_fn_error $? "missing file argument" ;;
##############################################
glogic-2.6/configure-6951-fi
glogic-2.6/configure:6952:ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
glogic-2.6/configure-6953-if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
##############################################
glogic-2.6/configure-6968- as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
glogic-2.6/configure:6969:ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
glogic-2.6/configure-6970-ac_delim='%!_!# '
##############################################
glogic-2.6/configure-6974-
glogic-2.6/configure:6975: ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
glogic-2.6/configure-6976- if test $ac_delim_n = $ac_delim_num; then
##############################################
glogic-2.6/configure-7136- esac
glogic-2.6/configure:7137: case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
glogic-2.6/configure-7138- as_fn_append ac_file_inputs " '$ac_f'"
##############################################
glogic-2.6/configure-7195-*)
glogic-2.6/configure:7196: ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
glogic-2.6/configure-7197- # A ".." for each directory in $ac_dir_suffix.
glogic-2.6/configure:7198: ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
glogic-2.6/configure-7199- case $ac_top_builddir_sub in
##############################################
glogic-2.6/configure-7256-/@mandir@/p'
glogic-2.6/configure:7257:case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
glogic-2.6/configure-7258-*datarootdir*) ac_datarootdir_seen=yes;;
##############################################
glogic-2.6/configure-7273-
glogic-2.6/configure:7274:# Neutralize VPATH when `$srcdir' = `.'.
glogic-2.6/configure-7275-# Shell code in configure.ac might set extrasub.
##############################################
glogic-2.6/configure-7301-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
glogic-2.6/configure:7302: { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
glogic-2.6/configure-7303- { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \
##############################################
glogic-2.6/configure-7337- # Strip MF so we end up with the name of the file.
glogic-2.6/configure:7338: mf=`echo "$mf" | sed -e 's/:.*$//'`
glogic-2.6/configure-7339- # Check whether this is an Automake generated Makefile or not.
##############################################
glogic-2.6/configure-7374- # from the Makefile without running `make'.
glogic-2.6/configure:7375: DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
glogic-2.6/configure-7376- test -z "$DEPDIR" && continue
glogic-2.6/configure:7377: am__include=`sed -n 's/^am__include = //p' < "$mf"`
glogic-2.6/configure-7378- test -z "am__include" && continue
glogic-2.6/configure:7379: am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
glogic-2.6/configure-7380- # When using ansi2knr, U may be empty or an underscore; expand it
glogic-2.6/configure:7381: U=`sed -n 's/^U = //p' < "$mf"`
glogic-2.6/configure-7382- # Find all dependency output files, they are included files with
##############################################
glogic-2.6/data/images/components/Makefile.in-68- esac
glogic-2.6/data/images/components/Makefile.in:69:am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
glogic-2.6/data/images/components/Makefile.in-70-am__vpath_adj = case $$p in \
glogic-2.6/data/images/components/Makefile.in:71: $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
glogic-2.6/data/images/components/Makefile.in-72- *) f=$$p;; \
glogic-2.6/data/images/components/Makefile.in-73- esac;
glogic-2.6/data/images/components/Makefile.in:74:am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
glogic-2.6/data/images/components/Makefile.in-75-am__install_max = 40
glogic-2.6/data/images/components/Makefile.in-76-am__nobase_strip_setup = \
glogic-2.6/data/images/components/Makefile.in:77: srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
glogic-2.6/data/images/components/Makefile.in-78-am__nobase_strip = \
##############################################
glogic-2.6/data/images/components/Makefile.in-311- @list='$(component_icon_DATA)'; test -n "$(component_icondir)" || list=; \
glogic-2.6/data/images/components/Makefile.in:312: files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
glogic-2.6/data/images/components/Makefile.in-313- dir='$(DESTDIR)$(component_icondir)'; $(am__uninstall_files_from_dir)
##############################################
glogic-2.6/data/images/components/Makefile.in-321-distdir: $(DISTFILES)
glogic-2.6/data/images/components/Makefile.in:322: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
glogic-2.6/data/images/components/Makefile.in:323: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
glogic-2.6/data/images/components/Makefile.in-324- list='$(DISTFILES)'; \
##############################################
glogic-2.6/data/images/components/Makefile.in-335- if test -d $$d/$$file; then \
glogic-2.6/data/images/components/Makefile.in:336: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
glogic-2.6/data/images/components/Makefile.in-337- if test -d "$(distdir)/$$file"; then \
##############################################
glogic-2.6/data/images/Makefile.in-75- esac
glogic-2.6/data/images/Makefile.in:76:am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
glogic-2.6/data/images/Makefile.in-77-am__vpath_adj = case $$p in \
glogic-2.6/data/images/Makefile.in:78: $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
glogic-2.6/data/images/Makefile.in-79- *) f=$$p;; \
glogic-2.6/data/images/Makefile.in-80- esac;
glogic-2.6/data/images/Makefile.in:81:am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
glogic-2.6/data/images/Makefile.in-82-am__install_max = 40
glogic-2.6/data/images/Makefile.in-83-am__nobase_strip_setup = \
glogic-2.6/data/images/Makefile.in:84: srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
glogic-2.6/data/images/Makefile.in-85-am__nobase_strip = \
##############################################
glogic-2.6/data/images/Makefile.in-120- while test -n "$$dir1"; do \
glogic-2.6/data/images/Makefile.in:121: first=`echo "$$dir1" | sed -e "$$sed_first"`; \
glogic-2.6/data/images/Makefile.in-122- if test "$$first" != "."; then \
glogic-2.6/data/images/Makefile.in-123- if test "$$first" = ".."; then \
glogic-2.6/data/images/Makefile.in:124: dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
glogic-2.6/data/images/Makefile.in:125: dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
glogic-2.6/data/images/Makefile.in-126- else \
glogic-2.6/data/images/Makefile.in:127: first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
glogic-2.6/data/images/Makefile.in-128- if test "$$first2" = "$$first"; then \
glogic-2.6/data/images/Makefile.in:129: dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
glogic-2.6/data/images/Makefile.in-130- else \
##############################################
glogic-2.6/data/images/Makefile.in-135- fi; \
glogic-2.6/data/images/Makefile.in:136: dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
glogic-2.6/data/images/Makefile.in-137- done; \
##############################################
glogic-2.6/data/images/Makefile.in-333- @list='$(ui_DATA)'; test -n "$(uidir)" || list=; \
glogic-2.6/data/images/Makefile.in:334: files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
glogic-2.6/data/images/Makefile.in-335- dir='$(DESTDIR)$(uidir)'; $(am__uninstall_files_from_dir)
##############################################
glogic-2.6/data/images/Makefile.in-351- dot_seen=no; \
glogic-2.6/data/images/Makefile.in:352: target=`echo $@ | sed s/-recursive//`; \
glogic-2.6/data/images/Makefile.in-353- list='$(SUBDIRS)'; for subdir in $$list; do \
##############################################
glogic-2.6/data/images/Makefile.in-386- rev="$$rev ."; \
glogic-2.6/data/images/Makefile.in:387: target=`echo $@ | sed s/-recursive//`; \
glogic-2.6/data/images/Makefile.in-388- for subdir in $$rev; do \
##############################################
glogic-2.6/data/images/Makefile.in-464-GTAGS:
glogic-2.6/data/images/Makefile.in:465: here=`$(am__cd) $(top_builddir) && pwd` \
glogic-2.6/data/images/Makefile.in-466- && $(am__cd) $(top_srcdir) \
##############################################
glogic-2.6/data/images/Makefile.in-472-distdir: $(DISTFILES)
glogic-2.6/data/images/Makefile.in:473: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
glogic-2.6/data/images/Makefile.in:474: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
glogic-2.6/data/images/Makefile.in-475- list='$(DISTFILES)'; \
##############################################
glogic-2.6/data/images/Makefile.in-486- if test -d $$d/$$file; then \
glogic-2.6/data/images/Makefile.in:487: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
glogic-2.6/data/images/Makefile.in-488- if test -d "$(distdir)/$$file"; then \
##############################################
glogic-2.6/data/Makefile.in-75- esac
glogic-2.6/data/Makefile.in:76:am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
glogic-2.6/data/Makefile.in-77-am__vpath_adj = case $$p in \
glogic-2.6/data/Makefile.in:78: $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
glogic-2.6/data/Makefile.in-79- *) f=$$p;; \
glogic-2.6/data/Makefile.in-80- esac;
glogic-2.6/data/Makefile.in:81:am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
glogic-2.6/data/Makefile.in-82-am__install_max = 40
glogic-2.6/data/Makefile.in-83-am__nobase_strip_setup = \
glogic-2.6/data/Makefile.in:84: srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
glogic-2.6/data/Makefile.in-85-am__nobase_strip = \
##############################################
glogic-2.6/data/Makefile.in-120- while test -n "$$dir1"; do \
glogic-2.6/data/Makefile.in:121: first=`echo "$$dir1" | sed -e "$$sed_first"`; \
glogic-2.6/data/Makefile.in-122- if test "$$first" != "."; then \
glogic-2.6/data/Makefile.in-123- if test "$$first" = ".."; then \
glogic-2.6/data/Makefile.in:124: dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
glogic-2.6/data/Makefile.in:125: dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
glogic-2.6/data/Makefile.in-126- else \
glogic-2.6/data/Makefile.in:127: first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
glogic-2.6/data/Makefile.in-128- if test "$$first2" = "$$first"; then \
glogic-2.6/data/Makefile.in:129: dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
glogic-2.6/data/Makefile.in-130- else \
##############################################
glogic-2.6/data/Makefile.in-135- fi; \
glogic-2.6/data/Makefile.in:136: dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
glogic-2.6/data/Makefile.in-137- done; \
##############################################
glogic-2.6/data/Makefile.in-331- @list='$(desktop_DATA)'; test -n "$(desktopdir)" || list=; \
glogic-2.6/data/Makefile.in:332: files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
glogic-2.6/data/Makefile.in-333- dir='$(DESTDIR)$(desktopdir)'; $(am__uninstall_files_from_dir)
##############################################
glogic-2.6/data/Makefile.in-349- dot_seen=no; \
glogic-2.6/data/Makefile.in:350: target=`echo $@ | sed s/-recursive//`; \
glogic-2.6/data/Makefile.in-351- list='$(SUBDIRS)'; for subdir in $$list; do \
##############################################
glogic-2.6/data/Makefile.in-384- rev="$$rev ."; \
glogic-2.6/data/Makefile.in:385: target=`echo $@ | sed s/-recursive//`; \
glogic-2.6/data/Makefile.in-386- for subdir in $$rev; do \
##############################################
glogic-2.6/data/Makefile.in-462-GTAGS:
glogic-2.6/data/Makefile.in:463: here=`$(am__cd) $(top_builddir) && pwd` \
glogic-2.6/data/Makefile.in-464- && $(am__cd) $(top_srcdir) \
##############################################
glogic-2.6/data/Makefile.in-470-distdir: $(DISTFILES)
glogic-2.6/data/Makefile.in:471: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
glogic-2.6/data/Makefile.in:472: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
glogic-2.6/data/Makefile.in-473- list='$(DISTFILES)'; \
##############################################
glogic-2.6/data/Makefile.in-484- if test -d $$d/$$file; then \
glogic-2.6/data/Makefile.in:485: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
glogic-2.6/data/Makefile.in-486- if test -d "$(distdir)/$$file"; then \
##############################################
glogic-2.6/data/icons/scalable/Makefile.in-68- esac
glogic-2.6/data/icons/scalable/Makefile.in:69:am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
glogic-2.6/data/icons/scalable/Makefile.in-70-am__vpath_adj = case $$p in \
glogic-2.6/data/icons/scalable/Makefile.in:71: $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
glogic-2.6/data/icons/scalable/Makefile.in-72- *) f=$$p;; \
glogic-2.6/data/icons/scalable/Makefile.in-73- esac;
glogic-2.6/data/icons/scalable/Makefile.in:74:am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
glogic-2.6/data/icons/scalable/Makefile.in-75-am__install_max = 40
glogic-2.6/data/icons/scalable/Makefile.in-76-am__nobase_strip_setup = \
glogic-2.6/data/icons/scalable/Makefile.in:77: srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
glogic-2.6/data/icons/scalable/Makefile.in-78-am__nobase_strip = \
##############################################
glogic-2.6/data/icons/scalable/Makefile.in-291- @list='$(icons_DATA)'; test -n "$(iconsdir)" || list=; \
glogic-2.6/data/icons/scalable/Makefile.in:292: files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
glogic-2.6/data/icons/scalable/Makefile.in-293- dir='$(DESTDIR)$(iconsdir)'; $(am__uninstall_files_from_dir)
##############################################
glogic-2.6/data/icons/scalable/Makefile.in-301-distdir: $(DISTFILES)
glogic-2.6/data/icons/scalable/Makefile.in:302: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
glogic-2.6/data/icons/scalable/Makefile.in:303: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
glogic-2.6/data/icons/scalable/Makefile.in-304- list='$(DISTFILES)'; \
##############################################
glogic-2.6/data/icons/scalable/Makefile.in-315- if test -d $$d/$$file; then \
glogic-2.6/data/icons/scalable/Makefile.in:316: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
glogic-2.6/data/icons/scalable/Makefile.in-317- if test -d "$(distdir)/$$file"; then \
##############################################
glogic-2.6/data/icons/Makefile.in-90- while test -n "$$dir1"; do \
glogic-2.6/data/icons/Makefile.in:91: first=`echo "$$dir1" | sed -e "$$sed_first"`; \
glogic-2.6/data/icons/Makefile.in-92- if test "$$first" != "."; then \
glogic-2.6/data/icons/Makefile.in-93- if test "$$first" = ".."; then \
glogic-2.6/data/icons/Makefile.in:94: dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
glogic-2.6/data/icons/Makefile.in:95: dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
glogic-2.6/data/icons/Makefile.in-96- else \
glogic-2.6/data/icons/Makefile.in:97: first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
glogic-2.6/data/icons/Makefile.in-98- if test "$$first2" = "$$first"; then \
glogic-2.6/data/icons/Makefile.in:99: dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
glogic-2.6/data/icons/Makefile.in-100- else \
##############################################
glogic-2.6/data/icons/Makefile.in-105- fi; \
glogic-2.6/data/icons/Makefile.in:106: dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
glogic-2.6/data/icons/Makefile.in-107- done; \
##############################################
glogic-2.6/data/icons/Makefile.in-290- dot_seen=no; \
glogic-2.6/data/icons/Makefile.in:291: target=`echo $@ | sed s/-recursive//`; \
glogic-2.6/data/icons/Makefile.in-292- list='$(SUBDIRS)'; for subdir in $$list; do \
##############################################
glogic-2.6/data/icons/Makefile.in-325- rev="$$rev ."; \
glogic-2.6/data/icons/Makefile.in:326: target=`echo $@ | sed s/-recursive//`; \
glogic-2.6/data/icons/Makefile.in-327- for subdir in $$rev; do \
##############################################
glogic-2.6/data/icons/Makefile.in-403-GTAGS:
glogic-2.6/data/icons/Makefile.in:404: here=`$(am__cd) $(top_builddir) && pwd` \
glogic-2.6/data/icons/Makefile.in-405- && $(am__cd) $(top_srcdir) \
##############################################
glogic-2.6/data/icons/Makefile.in-411-distdir: $(DISTFILES)
glogic-2.6/data/icons/Makefile.in:412: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
glogic-2.6/data/icons/Makefile.in:413: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
glogic-2.6/data/icons/Makefile.in-414- list='$(DISTFILES)'; \
##############################################
glogic-2.6/data/icons/Makefile.in-425- if test -d $$d/$$file; then \
glogic-2.6/data/icons/Makefile.in:426: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
glogic-2.6/data/icons/Makefile.in-427- if test -d "$(distdir)/$$file"; then \
##############################################
glogic-2.6/install-sh-229- fi
glogic-2.6/install-sh:230: cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
glogic-2.6/install-sh-231- *)
##############################################
glogic-2.6/install-sh-276- dstdir=$dst
glogic-2.6/install-sh:277: dst=$dstdir/`basename "$src"`
glogic-2.6/install-sh-278- dstdir_status=0
##############################################
glogic-2.6/install-sh-358- # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
glogic-2.6/install-sh:359: ls_ld_tmpdir=`ls -ld "$tmpdir"`
glogic-2.6/install-sh-360- case $ls_ld_tmpdir in
##############################################
glogic-2.6/install-sh-365- $mkdirprog -m$different_mode -p -- "$tmpdir" && {
glogic-2.6/install-sh:366: ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
glogic-2.6/install-sh-367- test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
##############################################
glogic-2.6/install-sh-425- case $prefix in
glogic-2.6/install-sh:426: *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
glogic-2.6/install-sh-427- *) qprefix=$prefix;;
##############################################
glogic-2.6/install-sh-474- if $copy_on_change &&
glogic-2.6/install-sh:475: old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
glogic-2.6/install-sh:476: new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
glogic-2.6/install-sh-477-
##############################################
glogic-2.6/examples/Makefile.in-246-distdir: $(DISTFILES)
glogic-2.6/examples/Makefile.in:247: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
glogic-2.6/examples/Makefile.in:248: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
glogic-2.6/examples/Makefile.in-249- list='$(DISTFILES)'; \
##############################################
glogic-2.6/examples/Makefile.in-260- if test -d $$d/$$file; then \
glogic-2.6/examples/Makefile.in:261: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
glogic-2.6/examples/Makefile.in-262- if test -d "$(distdir)/$$file"; then \
##############################################
glogic-2.6/glogic/Components/Makefile.in-68- esac
glogic-2.6/glogic/Components/Makefile.in:69:am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
glogic-2.6/glogic/Components/Makefile.in-70-am__vpath_adj = case $$p in \
glogic-2.6/glogic/Components/Makefile.in:71: $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
glogic-2.6/glogic/Components/Makefile.in-72- *) f=$$p;; \
glogic-2.6/glogic/Components/Makefile.in-73- esac;
glogic-2.6/glogic/Components/Makefile.in:74:am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
glogic-2.6/glogic/Components/Makefile.in-75-am__install_max = 40
glogic-2.6/glogic/Components/Makefile.in-76-am__nobase_strip_setup = \
glogic-2.6/glogic/Components/Makefile.in:77: srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
glogic-2.6/glogic/Components/Makefile.in-78-am__nobase_strip = \
##############################################
glogic-2.6/glogic/Components/Makefile.in-302- @list='$(components_PYTHON)'; test -n "$(componentsdir)" || list=; \
glogic-2.6/glogic/Components/Makefile.in:303: files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
glogic-2.6/glogic/Components/Makefile.in-304- test -n "$$files" || exit 0; \
glogic-2.6/glogic/Components/Makefile.in-305- dir='$(DESTDIR)$(componentsdir)'; \
glogic-2.6/glogic/Components/Makefile.in:306: filesc=`echo "$$files" | sed 's|$$|c|'`; \
glogic-2.6/glogic/Components/Makefile.in:307: fileso=`echo "$$files" | sed 's|$$|o|'`; \
glogic-2.6/glogic/Components/Makefile.in-308- st=0; \
##############################################
glogic-2.6/glogic/Components/Makefile.in-320-distdir: $(DISTFILES)
glogic-2.6/glogic/Components/Makefile.in:321: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
glogic-2.6/glogic/Components/Makefile.in:322: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
glogic-2.6/glogic/Components/Makefile.in-323- list='$(DISTFILES)'; \
##############################################
glogic-2.6/glogic/Components/Makefile.in-334- if test -d $$d/$$file; then \
glogic-2.6/glogic/Components/Makefile.in:335: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
glogic-2.6/glogic/Components/Makefile.in-336- if test -d "$(distdir)/$$file"; then \
##############################################
glogic-2.6/glogic/Makefile.in-75- esac
glogic-2.6/glogic/Makefile.in:76:am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
glogic-2.6/glogic/Makefile.in-77-am__vpath_adj = case $$p in \
glogic-2.6/glogic/Makefile.in:78: $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
glogic-2.6/glogic/Makefile.in-79- *) f=$$p;; \
glogic-2.6/glogic/Makefile.in-80- esac;
glogic-2.6/glogic/Makefile.in:81:am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
glogic-2.6/glogic/Makefile.in-82-am__install_max = 40
glogic-2.6/glogic/Makefile.in-83-am__nobase_strip_setup = \
glogic-2.6/glogic/Makefile.in:84: srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
glogic-2.6/glogic/Makefile.in-85-am__nobase_strip = \
##############################################
glogic-2.6/glogic/Makefile.in-121- while test -n "$$dir1"; do \
glogic-2.6/glogic/Makefile.in:122: first=`echo "$$dir1" | sed -e "$$sed_first"`; \
glogic-2.6/glogic/Makefile.in-123- if test "$$first" != "."; then \
glogic-2.6/glogic/Makefile.in-124- if test "$$first" = ".."; then \
glogic-2.6/glogic/Makefile.in:125: dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
glogic-2.6/glogic/Makefile.in:126: dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
glogic-2.6/glogic/Makefile.in-127- else \
glogic-2.6/glogic/Makefile.in:128: first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
glogic-2.6/glogic/Makefile.in-129- if test "$$first2" = "$$first"; then \
glogic-2.6/glogic/Makefile.in:130: dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
glogic-2.6/glogic/Makefile.in-131- else \
##############################################
glogic-2.6/glogic/Makefile.in-136- fi; \
glogic-2.6/glogic/Makefile.in:137: dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
glogic-2.6/glogic/Makefile.in-138- done; \
##############################################
glogic-2.6/glogic/Makefile.in-352- @list='$(glogic_PYTHON)'; test -n "$(glogicdir)" || list=; \
glogic-2.6/glogic/Makefile.in:353: files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
glogic-2.6/glogic/Makefile.in-354- test -n "$$files" || exit 0; \
glogic-2.6/glogic/Makefile.in-355- dir='$(DESTDIR)$(glogicdir)'; \
glogic-2.6/glogic/Makefile.in:356: filesc=`echo "$$files" | sed 's|$$|c|'`; \
glogic-2.6/glogic/Makefile.in:357: fileso=`echo "$$files" | sed 's|$$|o|'`; \
glogic-2.6/glogic/Makefile.in-358- st=0; \
##############################################
glogic-2.6/glogic/Makefile.in-378- dot_seen=no; \
glogic-2.6/glogic/Makefile.in:379: target=`echo $@ | sed s/-recursive//`; \
glogic-2.6/glogic/Makefile.in-380- list='$(SUBDIRS)'; for subdir in $$list; do \
##############################################
glogic-2.6/glogic/Makefile.in-413- rev="$$rev ."; \
glogic-2.6/glogic/Makefile.in:414: target=`echo $@ | sed s/-recursive//`; \
glogic-2.6/glogic/Makefile.in-415- for subdir in $$rev; do \
##############################################
glogic-2.6/glogic/Makefile.in-491-GTAGS:
glogic-2.6/glogic/Makefile.in:492: here=`$(am__cd) $(top_builddir) && pwd` \
glogic-2.6/glogic/Makefile.in-493- && $(am__cd) $(top_srcdir) \
##############################################
glogic-2.6/glogic/Makefile.in-499-distdir: $(DISTFILES)
glogic-2.6/glogic/Makefile.in:500: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
glogic-2.6/glogic/Makefile.in:501: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
glogic-2.6/glogic/Makefile.in-502- list='$(DISTFILES)'; \
##############################################
glogic-2.6/glogic/Makefile.in-513- if test -d $$d/$$file; then \
glogic-2.6/glogic/Makefile.in:514: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
glogic-2.6/glogic/Makefile.in-515- if test -d "$(distdir)/$$file"; then \
##############################################
glogic-2.6/configure.ac-20- cd $srcdir && \
glogic-2.6/configure.ac:21: bzrrev=`$srcdir/missing --run bzr revno` \
glogic-2.6/configure.ac-22- || echo Failed to get revision number >&2 \
##############################################
glogic-2.6/help/Makefile.in-295-distdir: $(DISTFILES)
glogic-2.6/help/Makefile.in:296: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
glogic-2.6/help/Makefile.in:297: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
glogic-2.6/help/Makefile.in-298- list='$(DISTFILES)'; \
##############################################
glogic-2.6/help/Makefile.in-309- if test -d $$d/$$file; then \
glogic-2.6/help/Makefile.in:310: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
glogic-2.6/help/Makefile.in-311- if test -d "$(distdir)/$$file"; then \
##############################################
glogic-2.6/aclocal.m4-224- GLIB_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
glogic-2.6/aclocal.m4:225: [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl
glogic-2.6/aclocal.m4-226- if test "$MSGFMT" != "no"; then
##############################################
glogic-2.6/aclocal.m4-245- GLIB_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
glogic-2.6/aclocal.m4:246: [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
glogic-2.6/aclocal.m4-247- AC_TRY_LINK(, [extern int _nl_msg_cat_cntr;
##############################################
glogic-2.6/aclocal.m4-397- if test "x$srcdir" != "x."; then
glogic-2.6/aclocal.m4:398: if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
glogic-2.6/aclocal.m4-399- posrcprefix="$srcdir/"
##############################################
glogic-2.6/aclocal.m4-421-test "x$exec_prefix" = xNONE && exec_prefix=$prefix
glogic-2.6/aclocal.m4:422:datarootdir=`eval echo "${datarootdir}"`
glogic-2.6/aclocal.m4-423-if test "x$CATOBJEXT" = "x.mo" ; then
glogic-2.6/aclocal.m4:424: localedir=`eval echo "${libdir}/locale"`
glogic-2.6/aclocal.m4-425-else
glogic-2.6/aclocal.m4:426: localedir=`eval echo "${datadir}/locale"`
glogic-2.6/aclocal.m4-427-fi
##############################################
glogic-2.6/aclocal.m4-474-
glogic-2.6/aclocal.m4:475:INTLTOOL_REQUIRED_VERSION_AS_INT=`echo $1 | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'`
glogic-2.6/aclocal.m4-476-INTLTOOL_APPLIED_VERSION=`intltool-update --version | head -1 | cut -d" " -f3`
glogic-2.6/aclocal.m4:477:INTLTOOL_APPLIED_VERSION_AS_INT=`echo $INTLTOOL_APPLIED_VERSION | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'`
glogic-2.6/aclocal.m4-478-if test -n "$1"; then
##############################################
glogic-2.6/aclocal.m4-562-fi
glogic-2.6/aclocal.m4:563:xgversion="`$XGETTEXT --version|grep '(GNU ' 2> /dev/null`"
glogic-2.6/aclocal.m4:564:mmversion="`$MSGMERGE --version|grep '(GNU ' 2> /dev/null`"
glogic-2.6/aclocal.m4:565:mfversion="`$MSGFMT --version|grep '(GNU ' 2> /dev/null`"
glogic-2.6/aclocal.m4-566-if test -z "$xgversion" -o -z "$mmversion" -o -z "$mfversion"; then
##############################################
glogic-2.6/aclocal.m4-578-else
glogic-2.6/aclocal.m4:579: IT_PERL_VERSION=`$INTLTOOL_PERL -e "printf '%vd', $^V"`
glogic-2.6/aclocal.m4-580- AC_MSG_RESULT([$IT_PERL_VERSION])
##############################################
glogic-2.6/aclocal.m4-583- AC_MSG_CHECKING([for XML::Parser])
glogic-2.6/aclocal.m4:584: if `$INTLTOOL_PERL -e "require XML::Parser" 2>/dev/null`; then
glogic-2.6/aclocal.m4-585- AC_MSG_RESULT([ok])
##############################################
glogic-2.6/aclocal.m4-848- if ! test -d "$$helpdir"; then $(mkinstalldirs) "$$helpdir"; fi; \
glogic-2.6/aclocal.m4:849: echo "$(INSTALL_DATA) $$d$$lc/$$f $$helpdir`basename $$f`"; \
glogic-2.6/aclocal.m4:850: $(INSTALL_DATA) "$$d$$lc/$$f" "$$helpdir`basename $$f`" || exit 1; \
glogic-2.6/aclocal.m4-851- done; done
glogic-2.6/aclocal.m4-852- @for f in $(_HELP_C_EXTRA); do \
glogic-2.6/aclocal.m4:853: lc=`dirname "$$f"`; lc=`basename "$$lc"`; \
glogic-2.6/aclocal.m4-854- if test -f "$$f"; then d=; else d="$(srcdir)/"; fi; \
##############################################
glogic-2.6/aclocal.m4-856- if ! test -d "$$helpdir"; then $(mkinstalldirs) "$$helpdir"; fi; \
glogic-2.6/aclocal.m4:857: echo "$(INSTALL_DATA) $$d$$f $$helpdir`basename $$f`"; \
glogic-2.6/aclocal.m4:858: $(INSTALL_DATA) "$$d$$f" "$$helpdir`basename $$f`" || exit 1; \
glogic-2.6/aclocal.m4-859- done
##############################################
glogic-2.6/aclocal.m4-863- helpdir="$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)/"; \
glogic-2.6/aclocal.m4:864: mdir=`dirname "$$f"`; \
glogic-2.6/aclocal.m4-865- if test "x$mdir" = "x."; then mdir=""; fi; \
##############################################
glogic-2.6/aclocal.m4-881- helpdir="$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)/"; \
glogic-2.6/aclocal.m4:882: echo "rm -f $$helpdir`basename $$f`"; \
glogic-2.6/aclocal.m4:883: rm -f "$$helpdir`basename $$f`"; \
glogic-2.6/aclocal.m4-884- done; done
glogic-2.6/aclocal.m4-885- @for f in $(_HELP_C_EXTRA); do \
glogic-2.6/aclocal.m4:886: lc=`dirname "$$f"`; lc=`basename "$$lc"`; \
glogic-2.6/aclocal.m4-887- helpdir="$(DESTDIR)$(HELP_DIR)/$$lc/$(HELP_ID)/"; \
glogic-2.6/aclocal.m4:888: echo "rm -f $$helpdir`basename $$f`"; \
glogic-2.6/aclocal.m4:889: rm -f "$$helpdir`basename $$f`"; \
glogic-2.6/aclocal.m4-890- done
##############################################
glogic-2.6/aclocal.m4-953-# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
glogic-2.6/aclocal.m4:954:# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
glogic-2.6/aclocal.m4-955-#
##############################################
glogic-2.6/aclocal.m4-977-# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
glogic-2.6/aclocal.m4:978:# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
glogic-2.6/aclocal.m4-979-# and then we would define $MISSING as
##############################################
glogic-2.6/aclocal.m4-993-# expand $ac_aux_dir to an absolute path
glogic-2.6/aclocal.m4:994:am_aux_dir=`cd $ac_aux_dir && pwd`
glogic-2.6/aclocal.m4-995-])
##############################################
glogic-2.6/aclocal.m4-1095- if test "$am_compiler_list" = ""; then
glogic-2.6/aclocal.m4:1096: am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
glogic-2.6/aclocal.m4-1097- fi
##############################################
glogic-2.6/aclocal.m4-1244- # Strip MF so we end up with the name of the file.
glogic-2.6/aclocal.m4:1245: mf=`echo "$mf" | sed -e 's/:.*$//'`
glogic-2.6/aclocal.m4-1246- # Check whether this is an Automake generated Makefile or not.
##############################################
glogic-2.6/aclocal.m4-1253- if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
glogic-2.6/aclocal.m4:1254: dirpart=`AS_DIRNAME("$mf")`
glogic-2.6/aclocal.m4-1255- else
##############################################
glogic-2.6/aclocal.m4-1259- # from the Makefile without running `make'.
glogic-2.6/aclocal.m4:1260: DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
glogic-2.6/aclocal.m4-1261- test -z "$DEPDIR" && continue
glogic-2.6/aclocal.m4:1262: am__include=`sed -n 's/^am__include = //p' < "$mf"`
glogic-2.6/aclocal.m4-1263- test -z "am__include" && continue
glogic-2.6/aclocal.m4:1264: am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
glogic-2.6/aclocal.m4-1265- # When using ansi2knr, U may be empty or an underscore; expand it
glogic-2.6/aclocal.m4:1266: U=`sed -n 's/^U = //p' < "$mf"`
glogic-2.6/aclocal.m4-1267- # Find all dependency output files, they are included files with
##############################################
glogic-2.6/aclocal.m4-1275- test -f "$dirpart/$file" && continue
glogic-2.6/aclocal.m4:1276: fdir=`AS_DIRNAME(["$file"])`
glogic-2.6/aclocal.m4-1277- AS_MKDIR_P([$dirpart/$fdir])
##############################################
glogic-2.6/aclocal.m4-1330-AC_REQUIRE([AC_PROG_INSTALL])dnl
glogic-2.6/aclocal.m4:1331:if test "`cd $srcdir && pwd`" != "`pwd`"; then
glogic-2.6/aclocal.m4-1332- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
##############################################
glogic-2.6/aclocal.m4-1432- * )
glogic-2.6/aclocal.m4:1433: _am_stamp_count=`expr $_am_stamp_count + 1` ;;
glogic-2.6/aclocal.m4-1434- esac
glogic-2.6/aclocal.m4-1435-done
glogic-2.6/aclocal.m4:1436:echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
glogic-2.6/aclocal.m4-1437-
##############################################
glogic-2.6/aclocal.m4-1510-# Ignore all kinds of additional output from `make'.
glogic-2.6/aclocal.m4:1511:case `$am_make -s -f confmf 2> /dev/null` in #(
glogic-2.6/aclocal.m4-1512-*the\ am__doit\ target*)
##############################################
glogic-2.6/aclocal.m4-1520- echo '.include "confinc"' > confmf
glogic-2.6/aclocal.m4:1521: case `$am_make -s -f confmf 2> /dev/null` in #(
glogic-2.6/aclocal.m4-1522- *the\ am__doit\ target*)
##############################################
glogic-2.6/aclocal.m4-1726- AC_CACHE_CHECK([for $am_display_PYTHON version], [am_cv_python_version],
glogic-2.6/aclocal.m4:1727: [am_cv_python_version=`$PYTHON -c "import sys; sys.stdout.write(sys.version[[:3]])"`])
glogic-2.6/aclocal.m4-1728- AC_SUBST([PYTHON_VERSION], [$am_cv_python_version])
##############################################
glogic-2.6/aclocal.m4-1741- AC_CACHE_CHECK([for $am_display_PYTHON platform], [am_cv_python_platform],
glogic-2.6/aclocal.m4:1742: [am_cv_python_platform=`$PYTHON -c "import sys; sys.stdout.write(sys.platform)"`])
glogic-2.6/aclocal.m4-1743- AC_SUBST([PYTHON_PLATFORM], [$am_cv_python_platform])
##############################################
glogic-2.6/aclocal.m4-1760- fi
glogic-2.6/aclocal.m4:1761: am_cv_python_pythondir=`$PYTHON -c "import sys; from distutils import sysconfig; sys.stdout.write(sysconfig.get_python_lib(0,0,prefix='$am_py_prefix'))" 2>/dev/null`
glogic-2.6/aclocal.m4-1762- case $am_cv_python_pythondir in
glogic-2.6/aclocal.m4-1763- $am_py_prefix*)
glogic-2.6/aclocal.m4:1764: am__strip_prefix=`echo "$am_py_prefix" | sed 's|.|.|g'`
glogic-2.6/aclocal.m4:1765: am_cv_python_pythondir=`echo "$am_cv_python_pythondir" | sed "s,^$am__strip_prefix,$PYTHON_PREFIX,"`
glogic-2.6/aclocal.m4-1766- ;;
##############################################
glogic-2.6/aclocal.m4-1795- fi
glogic-2.6/aclocal.m4:1796: am_cv_python_pyexecdir=`$PYTHON -c "import sys; from distutils import sysconfig; sys.stdout.write(sysconfig.get_python_lib(1,0,prefix='$am_py_exec_prefix'))" 2>/dev/null`
glogic-2.6/aclocal.m4-1797- case $am_cv_python_pyexecdir in
glogic-2.6/aclocal.m4-1798- $am_py_exec_prefix*)
glogic-2.6/aclocal.m4:1799: am__strip_prefix=`echo "$am_py_exec_prefix" | sed 's|.|.|g'`
glogic-2.6/aclocal.m4:1800: am_cv_python_pyexecdir=`echo "$am_cv_python_pyexecdir" | sed "s,^$am__strip_prefix,$PYTHON_EXEC_PREFIX,"`
glogic-2.6/aclocal.m4-1801- ;;
##############################################
glogic-2.6/aclocal.m4-1899-if (
glogic-2.6/aclocal.m4:1900: set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
glogic-2.6/aclocal.m4-1901- if test "$[*]" = "X"; then
glogic-2.6/aclocal.m4-1902- # -L didn't work.
glogic-2.6/aclocal.m4:1903: set X `ls -t "$srcdir/configure" conftest.file`
glogic-2.6/aclocal.m4-1904- fi
##############################################
glogic-2.6/missing-129- # Could not run --version or --help. This is probably someone
glogic-2.6/missing:130: # running `$TOOL --version' or `$TOOL --help' to check whether
glogic-2.6/missing-131- # $TOOL exists and not knowing $TOOL uses missing.
##############################################
glogic-2.6/missing-163- from any GNU archive site."
glogic-2.6/missing:164: files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
glogic-2.6/missing-165- test -z "$files" && files="config.h"
##############################################
glogic-2.6/missing-192- proper tools for further handling them.
glogic-2.6/missing:193: You can get \`$1' as part of \`Autoconf' from any GNU
glogic-2.6/missing-194- archive site."
glogic-2.6/missing-195-
glogic-2.6/missing:196: file=`echo "$*" | sed -n "$sed_output"`
glogic-2.6/missing:197: test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
glogic-2.6/missing-198- if test -f "$file"; then
##############################################
glogic-2.6/missing-221- *.y)
glogic-2.6/missing:222: SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
glogic-2.6/missing-223- if test -f "$SRCFILE"; then
##############################################
glogic-2.6/missing-225- fi
glogic-2.6/missing:226: SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
glogic-2.6/missing-227- if test -f "$SRCFILE"; then
##############################################
glogic-2.6/missing-251- *.l)
glogic-2.6/missing:252: SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
glogic-2.6/missing-253- if test -f "$SRCFILE"; then
##############################################
glogic-2.6/missing-270-
glogic-2.6/missing:271: file=`echo "$*" | sed -n "$sed_output"`
glogic-2.6/missing:272: test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
glogic-2.6/missing-273- if test -f "$file"; then
##############################################
glogic-2.6/missing-290- # The file to touch is that specified with -o ...
glogic-2.6/missing:291: file=`echo "$*" | sed -n "$sed_output"`
glogic-2.6/missing:292: test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
glogic-2.6/missing-293- if test -z "$file"; then
glogic-2.6/missing-294- # ... or it is the one specified with @setfilename ...
glogic-2.6/missing:295: infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
glogic-2.6/missing-296- file=`sed -n '
##############################################
glogic-2.6/missing-302- # ... or it is derived from the source name (dir/f.texi becomes f.info)
glogic-2.6/missing:303: test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
glogic-2.6/missing-304- fi
##############################################
glogic-2.6/bin/Makefile.in-62-CONFIG_CLEAN_VPATH_FILES =
glogic-2.6/bin/Makefile.in:63:am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
glogic-2.6/bin/Makefile.in-64-am__vpath_adj = case $$p in \
glogic-2.6/bin/Makefile.in:65: $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
glogic-2.6/bin/Makefile.in-66- *) f=$$p;; \
glogic-2.6/bin/Makefile.in-67- esac;
glogic-2.6/bin/Makefile.in:68:am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
glogic-2.6/bin/Makefile.in-69-am__install_max = 40
glogic-2.6/bin/Makefile.in-70-am__nobase_strip_setup = \
glogic-2.6/bin/Makefile.in:71: srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
glogic-2.6/bin/Makefile.in-72-am__nobase_strip = \
##############################################
glogic-2.6/bin/Makefile.in-310-distdir: $(DISTFILES)
glogic-2.6/bin/Makefile.in:311: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
glogic-2.6/bin/Makefile.in:312: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
glogic-2.6/bin/Makefile.in-313- list='$(DISTFILES)'; \
##############################################
glogic-2.6/bin/Makefile.in-324- if test -d $$d/$$file; then \
glogic-2.6/bin/Makefile.in:325: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
glogic-2.6/bin/Makefile.in-326- if test -d "$(distdir)/$$file"; then \
##############################################
glogic-2.6/m4/as-ac-expand.m4-30- while true; do
glogic-2.6/m4/as-ac-expand.m4:31: new_full_var="`eval echo $full_var`"
glogic-2.6/m4/as-ac-expand.m4-32- if test "x$new_full_var" = "x$full_var"; then break; fi
##############################################
glogic-2.6/po/Makefile.in.in-58-
glogic-2.6/po/Makefile.in.in:59:USER_LINGUAS=$(shell if test -n "$(LINGUAS)"; then LLINGUAS="$(LINGUAS)"; ALINGUAS="$(ALL_LINGUAS)"; for lang in $$LLINGUAS; do if test -n "`grep \^$$lang$$ $(srcdir)/LINGUAS 2>/dev/null`" -o -n "`echo $$ALINGUAS|tr ' ' '\n'|grep \^$$lang$$`"; then printf "$$lang "; fi; done; fi)
glogic-2.6/po/Makefile.in.in-60-
##############################################
glogic-2.6/po/Makefile.in.in-83-.po.gmo:
glogic-2.6/po/Makefile.in.in:84: file=`echo $* | sed 's,.*/,,'`.gmo \
glogic-2.6/po/Makefile.in.in-85- && rm -f $$file && $(GMSGFMT) -o $$file $<
##############################################
glogic-2.6/po/Makefile.in.in-184- echo "$$lang:"; \
glogic-2.6/po/Makefile.in.in:185: result="`$(MSGMERGE) -o $$tmpdir/$$lang.new.po $$lang`"; \
glogic-2.6/po/Makefile.in.in-186- if $$result; then \
##############################################
glogic-2.6/Makefile.in-102- while test -n "$$dir1"; do \
glogic-2.6/Makefile.in:103: first=`echo "$$dir1" | sed -e "$$sed_first"`; \
glogic-2.6/Makefile.in-104- if test "$$first" != "."; then \
glogic-2.6/Makefile.in-105- if test "$$first" = ".."; then \
glogic-2.6/Makefile.in:106: dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
glogic-2.6/Makefile.in:107: dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
glogic-2.6/Makefile.in-108- else \
glogic-2.6/Makefile.in:109: first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
glogic-2.6/Makefile.in-110- if test "$$first2" = "$$first"; then \
glogic-2.6/Makefile.in:111: dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
glogic-2.6/Makefile.in-112- else \
##############################################
glogic-2.6/Makefile.in-117- fi; \
glogic-2.6/Makefile.in:118: dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
glogic-2.6/Makefile.in-119- done; \
##############################################
glogic-2.6/Makefile.in-326- dot_seen=no; \
glogic-2.6/Makefile.in:327: target=`echo $@ | sed s/-recursive//`; \
glogic-2.6/Makefile.in-328- list='$(SUBDIRS)'; for subdir in $$list; do \
##############################################
glogic-2.6/Makefile.in-361- rev="$$rev ."; \
glogic-2.6/Makefile.in:362: target=`echo $@ | sed s/-recursive//`; \
glogic-2.6/Makefile.in-363- for subdir in $$rev; do \
##############################################
glogic-2.6/Makefile.in-439-GTAGS:
glogic-2.6/Makefile.in:440: here=`$(am__cd) $(top_builddir) && pwd` \
glogic-2.6/Makefile.in-441- && $(am__cd) $(top_srcdir) \
##############################################
glogic-2.6/Makefile.in-449- test -d "$(distdir)" || mkdir "$(distdir)"
glogic-2.6/Makefile.in:450: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
glogic-2.6/Makefile.in:451: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
glogic-2.6/Makefile.in-452- list='$(DISTFILES)'; \
##############################################
glogic-2.6/Makefile.in-463- if test -d $$d/$$file; then \
glogic-2.6/Makefile.in:464: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
glogic-2.6/Makefile.in-465- if test -d "$(distdir)/$$file"; then \
##############################################
glogic-2.6/Makefile.in-577- test -d $(distdir)/_build || exit 0; \
glogic-2.6/Makefile.in:578: dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
glogic-2.6/Makefile.in-579- && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
##############################################
glogic-2.6/Makefile.in-620- }; \
glogic-2.6/Makefile.in:621: test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
glogic-2.6/Makefile.in-622- || { echo "ERROR: files left after uninstall:" ; \
##############################################
glogic-2.6/Makefile.in-632- fi
glogic-2.6/Makefile.in:633: @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
glogic-2.6/Makefile.in-634- || { echo "ERROR: files left in build directory after distclean:" ; \