===========================================================
.___ __ __
_________________ __ __ __| _/|__|/ |_
/ ___\_` __ \__ \ | | \/ __ | | \\_ __\
/ /_/ > | \// __ \| | / /_/ | | || |
\___ /|__| (____ /____/\____ | |__||__|
/_____/ \/ \/
grep rough audit - static analysis tool
v2.8 written by @Wireghoul
=================================[justanotherhacker.com]===
gpx-2.6.7/Makefile.in-68- { \
gpx-2.6.7/Makefile.in:69: flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
gpx-2.6.7/Makefile.in-70- }; \
##############################################
gpx-2.6.7/Makefile.in-204- while test -n "$$dir1"; do \
gpx-2.6.7/Makefile.in:205: first=`echo "$$dir1" | sed -e "$$sed_first"`; \
gpx-2.6.7/Makefile.in-206- if test "$$first" != "."; then \
gpx-2.6.7/Makefile.in-207- if test "$$first" = ".."; then \
gpx-2.6.7/Makefile.in:208: dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
gpx-2.6.7/Makefile.in:209: dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
gpx-2.6.7/Makefile.in-210- else \
gpx-2.6.7/Makefile.in:211: first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
gpx-2.6.7/Makefile.in-212- if test "$$first2" = "$$first"; then \
gpx-2.6.7/Makefile.in:213: dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
gpx-2.6.7/Makefile.in-214- else \
##############################################
gpx-2.6.7/Makefile.in-219- fi; \
gpx-2.6.7/Makefile.in:220: dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
gpx-2.6.7/Makefile.in-221- done; \
##############################################
gpx-2.6.7/Makefile.in-411- dot_seen=no; \
gpx-2.6.7/Makefile.in:412: target=`echo $@ | sed s/-recursive//`; \
gpx-2.6.7/Makefile.in-413- case "$@" in \
##############################################
gpx-2.6.7/Makefile.in-475-GTAGS:
gpx-2.6.7/Makefile.in:476: here=`$(am__cd) $(top_builddir) && pwd` \
gpx-2.6.7/Makefile.in-477- && $(am__cd) $(top_srcdir) \
##############################################
gpx-2.6.7/Makefile.in-510- test -d "$(distdir)" || mkdir "$(distdir)"
gpx-2.6.7/Makefile.in:511: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
gpx-2.6.7/Makefile.in:512: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
gpx-2.6.7/Makefile.in-513- list='$(DISTFILES)'; \
##############################################
gpx-2.6.7/Makefile.in-524- if test -d $$d/$$file; then \
gpx-2.6.7/Makefile.in:525: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
gpx-2.6.7/Makefile.in-526- if test -d "$(distdir)/$$file"; then \
##############################################
gpx-2.6.7/Makefile.in-635- test -d $(distdir)/_build || exit 0; \
gpx-2.6.7/Makefile.in:636: dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
gpx-2.6.7/Makefile.in-637- && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
##############################################
gpx-2.6.7/Makefile.in-679- }; \
gpx-2.6.7/Makefile.in:680: test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
gpx-2.6.7/Makefile.in-681- || { echo "ERROR: files left after uninstall:" ; \
##############################################
gpx-2.6.7/Makefile.in-691- fi
gpx-2.6.7/Makefile.in:692: @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
gpx-2.6.7/Makefile.in-693- || { echo "ERROR: files left in build directory after distclean:" ; \
##############################################
gpx-2.6.7/aclocal.m4-92-# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
gpx-2.6.7/aclocal.m4:93:# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
gpx-2.6.7/aclocal.m4-94-# and then we would define $MISSING as
##############################################
gpx-2.6.7/aclocal.m4-107-# Expand $ac_aux_dir to an absolute path.
gpx-2.6.7/aclocal.m4:108:am_aux_dir=`cd "$ac_aux_dir" && pwd`
gpx-2.6.7/aclocal.m4-109-])
##############################################
gpx-2.6.7/aclocal.m4-205- if test "$am_compiler_list" = ""; then
gpx-2.6.7/aclocal.m4:206: am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
gpx-2.6.7/aclocal.m4-207- fi
##############################################
gpx-2.6.7/aclocal.m4-358- # Strip MF so we end up with the name of the file.
gpx-2.6.7/aclocal.m4:359: am_mf=`AS_ECHO(["$am_mf"]) | sed -e 's/:.*$//'`
gpx-2.6.7/aclocal.m4-360- # Check whether this is an Automake generated Makefile which includes
##############################################
gpx-2.6.7/aclocal.m4-365- || continue
gpx-2.6.7/aclocal.m4:366: am_dirpart=`AS_DIRNAME(["$am_mf"])`
gpx-2.6.7/aclocal.m4:367: am_filepart=`AS_BASENAME(["$am_mf"])`
gpx-2.6.7/aclocal.m4-368- AM_RUN_LOG([cd "$am_dirpart" \
##############################################
gpx-2.6.7/aclocal.m4-450-AC_REQUIRE([AC_PROG_INSTALL])dnl
gpx-2.6.7/aclocal.m4:451:if test "`cd $srcdir && pwd`" != "`pwd`"; then
gpx-2.6.7/aclocal.m4-452- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
##############################################
gpx-2.6.7/aclocal.m4-609- * )
gpx-2.6.7/aclocal.m4:610: _am_stamp_count=`expr $_am_stamp_count + 1` ;;
gpx-2.6.7/aclocal.m4-611- esac
gpx-2.6.7/aclocal.m4-612-done
gpx-2.6.7/aclocal.m4:613:echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
gpx-2.6.7/aclocal.m4-614-
##############################################
gpx-2.6.7/aclocal.m4-901- echo "timestamp, slept: $am_has_slept" > conftest.file
gpx-2.6.7/aclocal.m4:902: set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
gpx-2.6.7/aclocal.m4-903- if test "$[*]" = "X"; then
gpx-2.6.7/aclocal.m4-904- # -L didn't work.
gpx-2.6.7/aclocal.m4:905: set X `ls -t "$srcdir/configure" conftest.file`
gpx-2.6.7/aclocal.m4-906- fi
##############################################
gpx-2.6.7/build-aux/compile-67- mingw/*)
gpx-2.6.7/build-aux/compile:68: file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
gpx-2.6.7/build-aux/compile-69- ;;
gpx-2.6.7/build-aux/compile-70- cygwin/*)
gpx-2.6.7/build-aux/compile:71: file=`cygpath -m "$file" || echo "$file"`
gpx-2.6.7/build-aux/compile-72- ;;
gpx-2.6.7/build-aux/compile-73- wine/*)
gpx-2.6.7/build-aux/compile:74: file=`winepath -w "$file" || echo "$file"`
gpx-2.6.7/build-aux/compile-75- ;;
##############################################
gpx-2.6.7/build-aux/compile-309-# Name of file we expect compiler to create.
gpx-2.6.7/build-aux/compile:310:cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
gpx-2.6.7/build-aux/compile-311-
##############################################
gpx-2.6.7/build-aux/compile-315-# object file name, since that is what matters with a parallel build.
gpx-2.6.7/build-aux/compile:316:lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
gpx-2.6.7/build-aux/compile-317-while true; do
##############################################
gpx-2.6.7/build-aux/config.guess-34-
gpx-2.6.7/build-aux/config.guess:35:me=`echo "$0" | sed -e 's,.*/,,'`
gpx-2.6.7/build-aux/config.guess-36-
##############################################
gpx-2.6.7/build-aux/config.guess-102-: ${TMPDIR=/tmp} ;
gpx-2.6.7/build-aux/config.guess:103: { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
gpx-2.6.7/build-aux/config.guess-104- { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
##############################################
gpx-2.6.7/build-aux/config.guess-151- EOF
gpx-2.6.7/build-aux/config.guess:152: eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC' | sed 's, ,,g'`
gpx-2.6.7/build-aux/config.guess-153- ;;
##############################################
gpx-2.6.7/build-aux/config.guess-209- *)
gpx-2.6.7/build-aux/config.guess:210: release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
gpx-2.6.7/build-aux/config.guess-211- ;;
##############################################
gpx-2.6.7/build-aux/config.guess-240- *4.0)
gpx-2.6.7/build-aux/config.guess:241: UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
gpx-2.6.7/build-aux/config.guess-242- ;;
gpx-2.6.7/build-aux/config.guess-243- *5.*)
gpx-2.6.7/build-aux/config.guess:244: UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
gpx-2.6.7/build-aux/config.guess-245- ;;
##############################################
gpx-2.6.7/build-aux/config.guess-250- # types through head -n 1, so we only detect the type of CPU 0.
gpx-2.6.7/build-aux/config.guess:251: ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
gpx-2.6.7/build-aux/config.guess-252- case "$ALPHA_CPU_TYPE" in
##############################################
gpx-2.6.7/build-aux/config.guess-288- # 1.2 uses "1.2" for uname -r.
gpx-2.6.7/build-aux/config.guess:289: echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
gpx-2.6.7/build-aux/config.guess-290- # Reset EXIT trap before exiting to avoid spurious non-zero exit code.
##############################################
gpx-2.6.7/build-aux/config.guess-348- s390x:SunOS:*:*)
gpx-2.6.7/build-aux/config.guess:349: echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
gpx-2.6.7/build-aux/config.guess-350- exit ;;
gpx-2.6.7/build-aux/config.guess-351- sun4H:SunOS:5.*:*)
gpx-2.6.7/build-aux/config.guess:352: echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
gpx-2.6.7/build-aux/config.guess-353- exit ;;
gpx-2.6.7/build-aux/config.guess-354- sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
gpx-2.6.7/build-aux/config.guess:355: echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
gpx-2.6.7/build-aux/config.guess-356- exit ;;
##############################################
gpx-2.6.7/build-aux/config.guess-373- fi
gpx-2.6.7/build-aux/config.guess:374: echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
gpx-2.6.7/build-aux/config.guess-375- exit ;;
##############################################
gpx-2.6.7/build-aux/config.guess-379- # it's likely to be more like Solaris than SunOS4.
gpx-2.6.7/build-aux/config.guess:380: echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
gpx-2.6.7/build-aux/config.guess-381- exit ;;
##############################################
gpx-2.6.7/build-aux/config.guess-388- # Japanese Language versions have a version number like `4.1.3-JL'.
gpx-2.6.7/build-aux/config.guess:389: echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
gpx-2.6.7/build-aux/config.guess-390- exit ;;
##############################################
gpx-2.6.7/build-aux/config.guess-394- sun*:*:4.2BSD:*)
gpx-2.6.7/build-aux/config.guess:395: UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
gpx-2.6.7/build-aux/config.guess-396- test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
##############################################
gpx-2.6.7/build-aux/config.guess-476- $CC_FOR_BUILD -o $dummy $dummy.c &&
gpx-2.6.7/build-aux/config.guess:477: dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
gpx-2.6.7/build-aux/config.guess:478: SYSTEM_NAME=`$dummy $dummyarg` &&
gpx-2.6.7/build-aux/config.guess-479- { echo "$SYSTEM_NAME"; exit; }
##############################################
gpx-2.6.7/build-aux/config.guess-532- *:IRIX*:*:*)
gpx-2.6.7/build-aux/config.guess:533: echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
gpx-2.6.7/build-aux/config.guess-534- exit ;;
##############################################
gpx-2.6.7/build-aux/config.guess-562-EOF
gpx-2.6.7/build-aux/config.guess:563: if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
gpx-2.6.7/build-aux/config.guess-564- then
##############################################
gpx-2.6.7/build-aux/config.guess-575- *:AIX:*:[4567])
gpx-2.6.7/build-aux/config.guess:576: IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
gpx-2.6.7/build-aux/config.guess-577- if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
##############################################
gpx-2.6.7/build-aux/config.guess-610- 9000/[34678]??:HP-UX:*:*)
gpx-2.6.7/build-aux/config.guess:611: HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
gpx-2.6.7/build-aux/config.guess-612- case "${UNAME_MACHINE}" in
##############################################
gpx-2.6.7/build-aux/config.guess-664-EOF
gpx-2.6.7/build-aux/config.guess:665: (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
gpx-2.6.7/build-aux/config.guess-666- test -z "$HP_ARCH" && HP_ARCH=hppa
##############################################
gpx-2.6.7/build-aux/config.guess-692- ia64:HP-UX:*:*)
gpx-2.6.7/build-aux/config.guess:693: HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
gpx-2.6.7/build-aux/config.guess-694- echo ia64-hp-hpux${HPUX_REV}
##############################################
gpx-2.6.7/build-aux/config.guess-722-EOF
gpx-2.6.7/build-aux/config.guess:723: $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
gpx-2.6.7/build-aux/config.guess-724- { echo "$SYSTEM_NAME"; exit; }
##############################################
gpx-2.6.7/build-aux/config.guess-793- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
gpx-2.6.7/build-aux/config.guess:794: FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
gpx-2.6.7/build-aux/config.guess-795- echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
##############################################
gpx-2.6.7/build-aux/config.guess-798- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
gpx-2.6.7/build-aux/config.guess:799: FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
gpx-2.6.7/build-aux/config.guess-800- echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
##############################################
gpx-2.6.7/build-aux/config.guess-814- amd64)
gpx-2.6.7/build-aux/config.guess:815: echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
gpx-2.6.7/build-aux/config.guess-816- *)
gpx-2.6.7/build-aux/config.guess:817: echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
gpx-2.6.7/build-aux/config.guess-818- esac
##############################################
gpx-2.6.7/build-aux/config.guess-872- prep*:SunOS:5.*:*)
gpx-2.6.7/build-aux/config.guess:873: echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
gpx-2.6.7/build-aux/config.guess-874- exit ;;
##############################################
gpx-2.6.7/build-aux/config.guess-876- # the GNU system
gpx-2.6.7/build-aux/config.guess:877: echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-${LIBC}`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
gpx-2.6.7/build-aux/config.guess-878- exit ;;
##############################################
gpx-2.6.7/build-aux/config.guess-880- # other systems with GNU libc and userland
gpx-2.6.7/build-aux/config.guess:881: echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-${LIBC}
gpx-2.6.7/build-aux/config.guess-882- exit ;;
##############################################
gpx-2.6.7/build-aux/config.guess-968-EOF
gpx-2.6.7/build-aux/config.guess:969: eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
gpx-2.6.7/build-aux/config.guess-970- test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; }
##############################################
gpx-2.6.7/build-aux/config.guess-1062- i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
gpx-2.6.7/build-aux/config.guess:1063: UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
gpx-2.6.7/build-aux/config.guess-1064- if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
##############################################
gpx-2.6.7/build-aux/config.guess-1262- fi
gpx-2.6.7/build-aux/config.guess:1263: if test `echo "$UNAME_RELEASE" | sed -e 's/\..*//'` -le 10 ; then
gpx-2.6.7/build-aux/config.guess-1264- if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
##############################################
gpx-2.6.7/build-aux/config.guess-1347- *:DragonFly:*:*)
gpx-2.6.7/build-aux/config.guess:1348: echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
gpx-2.6.7/build-aux/config.guess-1349- exit ;;
##############################################
gpx-2.6.7/build-aux/config.guess-1360- i*86:skyos:*:*)
gpx-2.6.7/build-aux/config.guess:1361: echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
gpx-2.6.7/build-aux/config.guess-1362- exit ;;
##############################################
gpx-2.6.7/build-aux/config.sub-52-
gpx-2.6.7/build-aux/config.sub:53:me=`echo "$0" | sed -e 's,.*/,,'`
gpx-2.6.7/build-aux/config.sub-54-
##############################################
gpx-2.6.7/build-aux/config.sub-115-# Here we must recognize all the valid KERNEL-OS combinations.
gpx-2.6.7/build-aux/config.sub:116:maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
gpx-2.6.7/build-aux/config.sub-117-case $maybe_os in
##############################################
gpx-2.6.7/build-aux/config.sub-123- os=-$maybe_os
gpx-2.6.7/build-aux/config.sub:124: basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
gpx-2.6.7/build-aux/config.sub-125- ;;
##############################################
gpx-2.6.7/build-aux/config.sub-127- os=-linux-android
gpx-2.6.7/build-aux/config.sub:128: basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown
gpx-2.6.7/build-aux/config.sub-129- ;;
gpx-2.6.7/build-aux/config.sub-130- *)
gpx-2.6.7/build-aux/config.sub:131: basic_machine=`echo $1 | sed 's/-[^-]*$//'`
gpx-2.6.7/build-aux/config.sub-132- if [ $basic_machine != $1 ]
gpx-2.6.7/build-aux/config.sub:133: then os=`echo $1 | sed 's/.*-/-/'`
gpx-2.6.7/build-aux/config.sub-134- else os=; fi
##############################################
gpx-2.6.7/build-aux/config.sub-181- os=-sco5v6
gpx-2.6.7/build-aux/config.sub:182: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
gpx-2.6.7/build-aux/config.sub-183- ;;
##############################################
gpx-2.6.7/build-aux/config.sub-185- os=-sco3.2v5
gpx-2.6.7/build-aux/config.sub:186: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
gpx-2.6.7/build-aux/config.sub-187- ;;
##############################################
gpx-2.6.7/build-aux/config.sub-189- os=-sco3.2v4
gpx-2.6.7/build-aux/config.sub:190: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
gpx-2.6.7/build-aux/config.sub-191- ;;
gpx-2.6.7/build-aux/config.sub-192- -sco3.2.[4-9]*)
gpx-2.6.7/build-aux/config.sub:193: os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
gpx-2.6.7/build-aux/config.sub:194: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
gpx-2.6.7/build-aux/config.sub-195- ;;
##############################################
gpx-2.6.7/build-aux/config.sub-197- # Don't forget version if it is 3.2v4 or newer.
gpx-2.6.7/build-aux/config.sub:198: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
gpx-2.6.7/build-aux/config.sub-199- ;;
##############################################
gpx-2.6.7/build-aux/config.sub-201- # Don't forget version if it is 3.2v4 or newer.
gpx-2.6.7/build-aux/config.sub:202: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
gpx-2.6.7/build-aux/config.sub-203- ;;
##############################################
gpx-2.6.7/build-aux/config.sub-205- os=-sco3.2v2
gpx-2.6.7/build-aux/config.sub:206: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
gpx-2.6.7/build-aux/config.sub-207- ;;
gpx-2.6.7/build-aux/config.sub-208- -udk*)
gpx-2.6.7/build-aux/config.sub:209: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
gpx-2.6.7/build-aux/config.sub-210- ;;
##############################################
gpx-2.6.7/build-aux/config.sub-212- os=-isc2.2
gpx-2.6.7/build-aux/config.sub:213: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
gpx-2.6.7/build-aux/config.sub-214- ;;
##############################################
gpx-2.6.7/build-aux/config.sub-218- -isc*)
gpx-2.6.7/build-aux/config.sub:219: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
gpx-2.6.7/build-aux/config.sub-220- ;;
##############################################
gpx-2.6.7/build-aux/config.sub-230- -ptx*)
gpx-2.6.7/build-aux/config.sub:231: basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
gpx-2.6.7/build-aux/config.sub-232- ;;
gpx-2.6.7/build-aux/config.sub-233- -windowsnt*)
gpx-2.6.7/build-aux/config.sub:234: os=`echo $os | sed -e 's/windowsnt/winnt/'`
gpx-2.6.7/build-aux/config.sub-235- ;;
##############################################
gpx-2.6.7/build-aux/config.sub-362- *-*-*)
gpx-2.6.7/build-aux/config.sub:363: echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
gpx-2.6.7/build-aux/config.sub-364- exit 1
##############################################
gpx-2.6.7/build-aux/config.sub-486- amd64-*)
gpx-2.6.7/build-aux/config.sub:487: basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
gpx-2.6.7/build-aux/config.sub-488- ;;
##############################################
gpx-2.6.7/build-aux/config.sub-528- blackfin-*)
gpx-2.6.7/build-aux/config.sub:529: basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
gpx-2.6.7/build-aux/config.sub-530- os=-linux
##############################################
gpx-2.6.7/build-aux/config.sub-536- c54x-*)
gpx-2.6.7/build-aux/config.sub:537: basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'`
gpx-2.6.7/build-aux/config.sub-538- ;;
gpx-2.6.7/build-aux/config.sub-539- c55x-*)
gpx-2.6.7/build-aux/config.sub:540: basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'`
gpx-2.6.7/build-aux/config.sub-541- ;;
gpx-2.6.7/build-aux/config.sub-542- c6x-*)
gpx-2.6.7/build-aux/config.sub:543: basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'`
gpx-2.6.7/build-aux/config.sub-544- ;;
##############################################
gpx-2.6.7/build-aux/config.sub-739- i*86v32)
gpx-2.6.7/build-aux/config.sub:740: basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
gpx-2.6.7/build-aux/config.sub-741- os=-sysv32
##############################################
gpx-2.6.7/build-aux/config.sub-743- i*86v4*)
gpx-2.6.7/build-aux/config.sub:744: basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
gpx-2.6.7/build-aux/config.sub-745- os=-sysv4
##############################################
gpx-2.6.7/build-aux/config.sub-747- i*86v)
gpx-2.6.7/build-aux/config.sub:748: basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
gpx-2.6.7/build-aux/config.sub-749- os=-sysv
##############################################
gpx-2.6.7/build-aux/config.sub-751- i*86sol2)
gpx-2.6.7/build-aux/config.sub:752: basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
gpx-2.6.7/build-aux/config.sub-753- os=-solaris2
##############################################
gpx-2.6.7/build-aux/config.sub-781- m68knommu-*)
gpx-2.6.7/build-aux/config.sub:782: basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
gpx-2.6.7/build-aux/config.sub-783- os=-linux
##############################################
gpx-2.6.7/build-aux/config.sub-818- mips3*-*)
gpx-2.6.7/build-aux/config.sub:819: basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
gpx-2.6.7/build-aux/config.sub-820- ;;
gpx-2.6.7/build-aux/config.sub-821- mips3*)
gpx-2.6.7/build-aux/config.sub:822: basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
gpx-2.6.7/build-aux/config.sub-823- ;;
##############################################
gpx-2.6.7/build-aux/config.sub-840- ms1-*)
gpx-2.6.7/build-aux/config.sub:841: basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
gpx-2.6.7/build-aux/config.sub-842- ;;
##############################################
gpx-2.6.7/build-aux/config.sub-959- parisc-*)
gpx-2.6.7/build-aux/config.sub:960: basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
gpx-2.6.7/build-aux/config.sub-961- os=-linux
##############################################
gpx-2.6.7/build-aux/config.sub-975- pc98-*)
gpx-2.6.7/build-aux/config.sub:976: basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
gpx-2.6.7/build-aux/config.sub-977- ;;
##############################################
gpx-2.6.7/build-aux/config.sub-990- pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
gpx-2.6.7/build-aux/config.sub:991: basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
gpx-2.6.7/build-aux/config.sub-992- ;;
gpx-2.6.7/build-aux/config.sub-993- pentiumpro-* | p6-* | 6x86-* | athlon-*)
gpx-2.6.7/build-aux/config.sub:994: basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
gpx-2.6.7/build-aux/config.sub-995- ;;
gpx-2.6.7/build-aux/config.sub-996- pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
gpx-2.6.7/build-aux/config.sub:997: basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
gpx-2.6.7/build-aux/config.sub-998- ;;
gpx-2.6.7/build-aux/config.sub-999- pentium4-*)
gpx-2.6.7/build-aux/config.sub:1000: basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
gpx-2.6.7/build-aux/config.sub-1001- ;;
##############################################
gpx-2.6.7/build-aux/config.sub-1009- ppc-* | ppcbe-*)
gpx-2.6.7/build-aux/config.sub:1010: basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
gpx-2.6.7/build-aux/config.sub-1011- ;;
##############################################
gpx-2.6.7/build-aux/config.sub-1015- ppcle-* | powerpclittle-*)
gpx-2.6.7/build-aux/config.sub:1016: basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
gpx-2.6.7/build-aux/config.sub-1017- ;;
##############################################
gpx-2.6.7/build-aux/config.sub-1019- ;;
gpx-2.6.7/build-aux/config.sub:1020: ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
gpx-2.6.7/build-aux/config.sub-1021- ;;
##############################################
gpx-2.6.7/build-aux/config.sub-1025- ppc64le-* | powerpc64little-*)
gpx-2.6.7/build-aux/config.sub:1026: basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
gpx-2.6.7/build-aux/config.sub-1027- ;;
##############################################
gpx-2.6.7/build-aux/config.sub-1108- strongarm-* | thumb-*)
gpx-2.6.7/build-aux/config.sub:1109: basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'`
gpx-2.6.7/build-aux/config.sub-1110- ;;
##############################################
gpx-2.6.7/build-aux/config.sub-1238- xscale-* | xscalee[bl]-*)
gpx-2.6.7/build-aux/config.sub:1239: basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'`
gpx-2.6.7/build-aux/config.sub-1240- ;;
##############################################
gpx-2.6.7/build-aux/config.sub-1315- *)
gpx-2.6.7/build-aux/config.sub:1316: echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
gpx-2.6.7/build-aux/config.sub-1317- exit 1
##############################################
gpx-2.6.7/build-aux/config.sub-1323- *-digital*)
gpx-2.6.7/build-aux/config.sub:1324: basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
gpx-2.6.7/build-aux/config.sub-1325- ;;
gpx-2.6.7/build-aux/config.sub-1326- *-commodore*)
gpx-2.6.7/build-aux/config.sub:1327: basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
gpx-2.6.7/build-aux/config.sub-1328- ;;
##############################################
gpx-2.6.7/build-aux/config.sub-1344- -solaris1 | -solaris1.*)
gpx-2.6.7/build-aux/config.sub:1345: os=`echo $os | sed -e 's|solaris1|sunos4|'`
gpx-2.6.7/build-aux/config.sub-1346- ;;
##############################################
gpx-2.6.7/build-aux/config.sub-1356- -gnu/linux*)
gpx-2.6.7/build-aux/config.sub:1357: os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
gpx-2.6.7/build-aux/config.sub-1358- ;;
##############################################
gpx-2.6.7/build-aux/config.sub-1402- -nto*)
gpx-2.6.7/build-aux/config.sub:1403: os=`echo $os | sed -e 's|nto|nto-qnx|'`
gpx-2.6.7/build-aux/config.sub-1404- ;;
##############################################
gpx-2.6.7/build-aux/config.sub-1409- -mac*)
gpx-2.6.7/build-aux/config.sub:1410: os=`echo $os | sed -e 's|mac|macos|'`
gpx-2.6.7/build-aux/config.sub-1411- ;;
##############################################
gpx-2.6.7/build-aux/config.sub-1415- -linux*)
gpx-2.6.7/build-aux/config.sub:1416: os=`echo $os | sed -e 's|linux|linux-gnu|'`
gpx-2.6.7/build-aux/config.sub-1417- ;;
gpx-2.6.7/build-aux/config.sub-1418- -sunos5*)
gpx-2.6.7/build-aux/config.sub:1419: os=`echo $os | sed -e 's|sunos5|solaris2|'`
gpx-2.6.7/build-aux/config.sub-1420- ;;
gpx-2.6.7/build-aux/config.sub-1421- -sunos6*)
gpx-2.6.7/build-aux/config.sub:1422: os=`echo $os | sed -e 's|sunos6|solaris3|'`
gpx-2.6.7/build-aux/config.sub-1423- ;;
##############################################
gpx-2.6.7/build-aux/config.sub-1470- -sinix5.*)
gpx-2.6.7/build-aux/config.sub:1471: os=`echo $os | sed -e 's|sinix|sysv|'`
gpx-2.6.7/build-aux/config.sub-1472- ;;
##############################################
gpx-2.6.7/build-aux/config.sub-1523- # Get rid of the `-' at the beginning of $os.
gpx-2.6.7/build-aux/config.sub:1524: os=`echo $os | sed 's/[^-]*-//'`
gpx-2.6.7/build-aux/config.sub:1525: echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
gpx-2.6.7/build-aux/config.sub-1526- exit 1
##############################################
gpx-2.6.7/build-aux/config.sub-1786- esac
gpx-2.6.7/build-aux/config.sub:1787: basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
gpx-2.6.7/build-aux/config.sub-1788- ;;
##############################################
gpx-2.6.7/build-aux/depcomp-64- case $1 in
gpx-2.6.7/build-aux/depcomp:65: */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;;
gpx-2.6.7/build-aux/depcomp-66- *) dir=;;
##############################################
gpx-2.6.7/build-aux/depcomp-73-{
gpx-2.6.7/build-aux/depcomp:74: base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'`
gpx-2.6.7/build-aux/depcomp-75-}
##############################################
gpx-2.6.7/build-aux/depcomp-126- sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
gpx-2.6.7/build-aux/depcomp:127:tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
gpx-2.6.7/build-aux/depcomp-128-
##############################################
gpx-2.6.7/build-aux/depcomp-405- sleep 1
gpx-2.6.7/build-aux/depcomp:406: i=`expr $i - 1`
gpx-2.6.7/build-aux/depcomp-407- done
gpx-2.6.7/build-aux/depcomp-408- fi
gpx-2.6.7/build-aux/depcomp:409: i=`expr $i - 1`
gpx-2.6.7/build-aux/depcomp-410- done
##############################################
gpx-2.6.7/build-aux/depcomp-425- # Do two passes, one to just change these to
gpx-2.6.7/build-aux/depcomp:426: # `$object: dependent.h' and one to simply `dependent.h:'.
gpx-2.6.7/build-aux/depcomp-427- sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
##############################################
gpx-2.6.7/build-aux/depcomp-659- done
gpx-2.6.7/build-aux/depcomp:660: obj_suffix=`echo "$object" | sed 's/^.*\././'`
gpx-2.6.7/build-aux/depcomp-661- touch "$tmpdepfile"
##############################################
gpx-2.6.7/build-aux/install-sh-234- fi
gpx-2.6.7/build-aux/install-sh:235: cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
gpx-2.6.7/build-aux/install-sh-236- *)
##############################################
gpx-2.6.7/build-aux/install-sh-281- dstdir=$dst
gpx-2.6.7/build-aux/install-sh:282: dst=$dstdir/`basename "$src"`
gpx-2.6.7/build-aux/install-sh-283- dstdir_status=0
gpx-2.6.7/build-aux/install-sh-284- else
gpx-2.6.7/build-aux/install-sh:285: dstdir=`dirname "$dst"`
gpx-2.6.7/build-aux/install-sh-286- test -d "$dstdir"
##############################################
gpx-2.6.7/build-aux/install-sh-337- # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
gpx-2.6.7/build-aux/install-sh:338: ls_ld_tmpdir=`ls -ld "$tmpdir"`
gpx-2.6.7/build-aux/install-sh-339- case $ls_ld_tmpdir in
##############################################
gpx-2.6.7/build-aux/install-sh-344- $mkdirprog -m$different_mode -p -- "$tmpdir" && {
gpx-2.6.7/build-aux/install-sh:345: ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
gpx-2.6.7/build-aux/install-sh-346- test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
##############################################
gpx-2.6.7/build-aux/install-sh-402- case $prefix in
gpx-2.6.7/build-aux/install-sh:403: *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
gpx-2.6.7/build-aux/install-sh-404- *) qprefix=$prefix;;
##############################################
gpx-2.6.7/build-aux/install-sh-451- if $copy_on_change &&
gpx-2.6.7/build-aux/install-sh:452: old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
gpx-2.6.7/build-aux/install-sh:453: new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
gpx-2.6.7/build-aux/install-sh-454- set -f &&
##############################################
gpx-2.6.7/configure-45-if test -z "$BASH_VERSION$ZSH_VERSION" \
gpx-2.6.7/configure:46: && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
gpx-2.6.7/configure-47- as_echo='print -r --'
gpx-2.6.7/configure-48- as_echo_n='print -rn --'
gpx-2.6.7/configure:49:elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
gpx-2.6.7/configure-50- as_echo='printf %s\n'
##############################################
gpx-2.6.7/configure-52-else
gpx-2.6.7/configure:53: if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
gpx-2.6.7/configure-54- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
##############################################
gpx-2.6.7/configure-62- expr "X$arg" : "X\\(.*\\)$as_nl";
gpx-2.6.7/configure:63: arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
gpx-2.6.7/configure-64- esac;
##############################################
gpx-2.6.7/configure-199- eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
gpx-2.6.7/configure:200: test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
gpx-2.6.7/configure-201-test \$(( 1 + 1 )) = 2 || exit 1"
##############################################
gpx-2.6.7/configure-327- case $as_dir in #(
gpx-2.6.7/configure:328: *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
gpx-2.6.7/configure-329- *) as_qdir=$as_dir;;
##############################################
gpx-2.6.7/configure-400- {
gpx-2.6.7/configure:401: as_val=`expr "$@" || test $? -eq 1`
gpx-2.6.7/configure-402- }
##############################################
gpx-2.6.7/configure-407-# ----------------------------------------
gpx-2.6.7/configure:408:# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
gpx-2.6.7/configure-409-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
##############################################
gpx-2.6.7/configure-470- eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
gpx-2.6.7/configure:471: test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
gpx-2.6.7/configure-472- # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
##############################################
gpx-2.6.7/configure-823- case $ac_option in
gpx-2.6.7/configure:824: *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
gpx-2.6.7/configure-825- *=) ac_optarg= ;;
##############################################
gpx-2.6.7/configure-867- -disable-* | --disable-*)
gpx-2.6.7/configure:868: ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
gpx-2.6.7/configure-869- # Reject names that are not valid shell variable names.
##############################################
gpx-2.6.7/configure-872- ac_useropt_orig=$ac_useropt
gpx-2.6.7/configure:873: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
gpx-2.6.7/configure-874- case $ac_user_opts in
##############################################
gpx-2.6.7/configure-893- -enable-* | --enable-*)
gpx-2.6.7/configure:894: ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
gpx-2.6.7/configure-895- # Reject names that are not valid shell variable names.
##############################################
gpx-2.6.7/configure-898- ac_useropt_orig=$ac_useropt
gpx-2.6.7/configure:899: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
gpx-2.6.7/configure-900- case $ac_user_opts in
##############################################
gpx-2.6.7/configure-1106- -with-* | --with-*)
gpx-2.6.7/configure:1107: ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
gpx-2.6.7/configure-1108- # Reject names that are not valid shell variable names.
##############################################
gpx-2.6.7/configure-1111- ac_useropt_orig=$ac_useropt
gpx-2.6.7/configure:1112: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
gpx-2.6.7/configure-1113- case $ac_user_opts in
##############################################
gpx-2.6.7/configure-1122- -without-* | --without-*)
gpx-2.6.7/configure:1123: ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
gpx-2.6.7/configure-1124- # Reject names that are not valid shell variable names.
##############################################
gpx-2.6.7/configure-1127- ac_useropt_orig=$ac_useropt
gpx-2.6.7/configure:1128: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
gpx-2.6.7/configure-1129- case $ac_user_opts in
##############################################
gpx-2.6.7/configure-1160- *=*)
gpx-2.6.7/configure:1161: ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
gpx-2.6.7/configure-1162- # Reject names that are not valid shell variable names.
##############################################
gpx-2.6.7/configure-1181-if test -n "$ac_prev"; then
gpx-2.6.7/configure:1182: ac_option=--`echo $ac_prev | sed 's/_/-/g'`
gpx-2.6.7/configure-1183- as_fn_error $? "missing argument to $ac_option"
##############################################
gpx-2.6.7/configure-1203- */ )
gpx-2.6.7/configure:1204: ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
gpx-2.6.7/configure-1205- eval $ac_var=\$ac_val;;
##############################################
gpx-2.6.7/configure-1238-ac_ls_di=`ls -di .` &&
gpx-2.6.7/configure:1239:ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
gpx-2.6.7/configure-1240- as_fn_error $? "working directory cannot be determined"
##############################################
gpx-2.6.7/configure-1294-case $srcdir in
gpx-2.6.7/configure:1295:*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
gpx-2.6.7/configure-1296-esac
##############################################
gpx-2.6.7/configure-1337-By default, \`make install' will install all the files in
gpx-2.6.7/configure:1338:\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
gpx-2.6.7/configure:1339:an installation prefix other than \`$ac_default_prefix' using \`--prefix',
gpx-2.6.7/configure-1340-for instance \`--prefix=\$HOME'.
##############################################
gpx-2.6.7/configure-1429-*)
gpx-2.6.7/configure:1430: ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
gpx-2.6.7/configure-1431- # A ".." for each directory in $ac_dir_suffix.
gpx-2.6.7/configure:1432: ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
gpx-2.6.7/configure-1433- case $ac_top_builddir_sub in
##############################################
gpx-2.6.7/configure-2101- *\'*)
gpx-2.6.7/configure:2102: ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
gpx-2.6.7/configure-2103- esac
##############################################
gpx-2.6.7/configure-2184- case $ac_val in
gpx-2.6.7/configure:2185: *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
gpx-2.6.7/configure-2186- esac
##############################################
gpx-2.6.7/configure-2199- case $ac_val in
gpx-2.6.7/configure:2200: *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
gpx-2.6.7/configure-2201- esac
##############################################
gpx-2.6.7/configure-2319- set,)
gpx-2.6.7/configure:2320: { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
gpx-2.6.7/configure:2321:$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
gpx-2.6.7/configure-2322- ac_cache_corrupted=: ;;
##############################################
gpx-2.6.7/configure-2330- # differences in whitespace do not lead to failure.
gpx-2.6.7/configure:2331: ac_old_val_w=`echo x $ac_old_val`
gpx-2.6.7/configure:2332: ac_new_val_w=`echo x $ac_new_val`
gpx-2.6.7/configure-2333- if test "$ac_old_val_w" != "$ac_new_val_w"; then
##############################################
gpx-2.6.7/configure-2350- case $ac_new_val in
gpx-2.6.7/configure:2351: *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
gpx-2.6.7/configure-2352- *) ac_arg=$ac_var=$ac_new_val ;;
##############################################
gpx-2.6.7/configure-2525- echo "timestamp, slept: $am_has_slept" > conftest.file
gpx-2.6.7/configure:2526: set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
gpx-2.6.7/configure-2527- if test "$*" = "X"; then
gpx-2.6.7/configure-2528- # -L didn't work.
gpx-2.6.7/configure:2529: set X `ls -t "$srcdir/configure" conftest.file`
gpx-2.6.7/configure-2530- fi
##############################################
gpx-2.6.7/configure-2576-ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
gpx-2.6.7/configure:2577:program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
gpx-2.6.7/configure-2578-
gpx-2.6.7/configure-2579-# Expand $ac_aux_dir to an absolute path.
gpx-2.6.7/configure:2580:am_aux_dir=`cd "$ac_aux_dir" && pwd`
gpx-2.6.7/configure-2581-
##############################################
gpx-2.6.7/configure-2721- as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue
gpx-2.6.7/configure:2722: case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
gpx-2.6.7/configure-2723- 'mkdir (GNU coreutils) '* | \
##############################################
gpx-2.6.7/configure-2794-set x ${MAKE-make}
gpx-2.6.7/configure:2795:ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
gpx-2.6.7/configure-2796-if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
##############################################
gpx-2.6.7/configure-2804-# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
gpx-2.6.7/configure:2805:case `${MAKE-make} -f conftest.make 2>/dev/null` in
gpx-2.6.7/configure-2806- *@@@%%%=?*=@@@%%%*)
##############################################
gpx-2.6.7/configure-2870-
gpx-2.6.7/configure:2871:if test "`cd $srcdir && pwd`" != "`pwd`"; then
gpx-2.6.7/configure-2872- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
##############################################
gpx-2.6.7/configure-3025-test "x$ac_build_alias" = x &&
gpx-2.6.7/configure:3026: ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
gpx-2.6.7/configure-3027-test "x$ac_build_alias" = x &&
gpx-2.6.7/configure-3028- as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
gpx-2.6.7/configure:3029:ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
gpx-2.6.7/configure-3030- as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
##############################################
gpx-2.6.7/configure-3049-IFS=$ac_save_IFS
gpx-2.6.7/configure:3050:case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
gpx-2.6.7/configure-3051-
##############################################
gpx-2.6.7/configure-3060-else
gpx-2.6.7/configure:3061: ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
gpx-2.6.7/configure-3062- as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
##############################################
gpx-2.6.7/configure-3082-IFS=$ac_save_IFS
gpx-2.6.7/configure:3083:case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
gpx-2.6.7/configure-3084-
gpx-2.6.7/configure-3085-
gpx-2.6.7/configure:3086:PLATFORM=`$ac_aux_dir/archive-name.sh $host_os $host_cpu`
gpx-2.6.7/configure-3087-
##############################################
gpx-2.6.7/configure-3449-$as_echo_n "checking whether the C compiler works... " >&6; }
gpx-2.6.7/configure:3450:ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
gpx-2.6.7/configure-3451-
##############################################
gpx-2.6.7/configure-3493- then :; else
gpx-2.6.7/configure:3494: ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
gpx-2.6.7/configure-3495- fi
##############################################
gpx-2.6.7/configure-3553- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
gpx-2.6.7/configure:3554: *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
gpx-2.6.7/configure-3555- break;;
##############################################
gpx-2.6.7/configure-3662- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
gpx-2.6.7/configure:3663: *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
gpx-2.6.7/configure-3664- break;;
##############################################
gpx-2.6.7/configure-4043- if test "$am_compiler_list" = ""; then
gpx-2.6.7/configure:4044: am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
gpx-2.6.7/configure-4045- fi
##############################################
gpx-2.6.7/configure-4145-set x ${MAKE-make}
gpx-2.6.7/configure:4146:ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
gpx-2.6.7/configure-4147-if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
##############################################
gpx-2.6.7/configure-4155-# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
gpx-2.6.7/configure:4156:case `${MAKE-make} -f conftest.make 2>/dev/null` in
gpx-2.6.7/configure-4157- *@@@%%%=?*=@@@%%%*)
##############################################
gpx-2.6.7/configure-4515- # Check for GNU $ac_path_GREP
gpx-2.6.7/configure:4516:case `"$ac_path_GREP" --version 2>&1` in
gpx-2.6.7/configure-4517-*GNU*)
##############################################
gpx-2.6.7/configure-4581- # Check for GNU $ac_path_EGREP
gpx-2.6.7/configure:4582:case `"$ac_path_EGREP" --version 2>&1` in
gpx-2.6.7/configure-4583-*GNU*)
##############################################
gpx-2.6.7/configure-4742-do :
gpx-2.6.7/configure:4743: as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
gpx-2.6.7/configure-4744-ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
##############################################
gpx-2.6.7/configure-4747- cat >>confdefs.h <<_ACEOF
gpx-2.6.7/configure:4748:#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
gpx-2.6.7/configure-4749-_ACEOF
##############################################
gpx-2.6.7/configure-4757-do :
gpx-2.6.7/configure:4758: as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
gpx-2.6.7/configure-4759-ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
##############################################
gpx-2.6.7/configure-4761- cat >>confdefs.h <<_ACEOF
gpx-2.6.7/configure:4762:#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
gpx-2.6.7/configure-4763-_ACEOF
##############################################
gpx-2.6.7/configure-5097-do :
gpx-2.6.7/configure:5098: as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
gpx-2.6.7/configure-5099-ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
##############################################
gpx-2.6.7/configure-5101- cat >>confdefs.h <<_ACEOF
gpx-2.6.7/configure:5102:#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
gpx-2.6.7/configure-5103-_ACEOF
##############################################
gpx-2.6.7/configure-5208- ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
gpx-2.6.7/configure:5209: ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
gpx-2.6.7/configure-5210- # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
##############################################
gpx-2.6.7/configure-5327-if test -z "$BASH_VERSION$ZSH_VERSION" \
gpx-2.6.7/configure:5328: && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
gpx-2.6.7/configure-5329- as_echo='print -r --'
gpx-2.6.7/configure-5330- as_echo_n='print -rn --'
gpx-2.6.7/configure:5331:elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
gpx-2.6.7/configure-5332- as_echo='printf %s\n'
##############################################
gpx-2.6.7/configure-5334-else
gpx-2.6.7/configure:5335: if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
gpx-2.6.7/configure-5336- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
##############################################
gpx-2.6.7/configure-5344- expr "X$arg" : "X\\(.*\\)$as_nl";
gpx-2.6.7/configure:5345: arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
gpx-2.6.7/configure-5346- esac;
##############################################
gpx-2.6.7/configure-5421-# ----------------------------------------
gpx-2.6.7/configure:5422:# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
gpx-2.6.7/configure-5423-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
##############################################
gpx-2.6.7/configure-5493- {
gpx-2.6.7/configure:5494: as_val=`expr "$@" || test $? -eq 1`
gpx-2.6.7/configure-5495- }
##############################################
gpx-2.6.7/configure-5597- case $as_dir in #(
gpx-2.6.7/configure:5598: *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
gpx-2.6.7/configure-5599- *) as_qdir=$as_dir;;
##############################################
gpx-2.6.7/configure-5733-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
gpx-2.6.7/configure:5734:ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
gpx-2.6.7/configure-5735-ac_cs_version="\\
##############################################
gpx-2.6.7/configure-5758- --*=?*)
gpx-2.6.7/configure:5759: ac_option=`expr "X$1" : 'X\([^=]*\)='`
gpx-2.6.7/configure:5760: ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
gpx-2.6.7/configure-5761- ac_shift=:
##############################################
gpx-2.6.7/configure-5763- --*=)
gpx-2.6.7/configure:5764: ac_option=`expr "X$1" : 'X\([^=]*\)='`
gpx-2.6.7/configure-5765- ac_optarg=
##############################################
gpx-2.6.7/configure-5787- case $ac_optarg in
gpx-2.6.7/configure:5788: *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
gpx-2.6.7/configure-5789- '') as_fn_error $? "missing file argument" ;;
##############################################
gpx-2.6.7/configure-5795- case $ac_optarg in
gpx-2.6.7/configure:5796: *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
gpx-2.6.7/configure-5797- esac
##############################################
gpx-2.6.7/configure-5925-fi
gpx-2.6.7/configure:5926:ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
gpx-2.6.7/configure-5927-if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
##############################################
gpx-2.6.7/configure-5942- as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
gpx-2.6.7/configure:5943:ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
gpx-2.6.7/configure-5944-ac_delim='%!_!# '
##############################################
gpx-2.6.7/configure-5948-
gpx-2.6.7/configure:5949: ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
gpx-2.6.7/configure-5950- if test $ac_delim_n = $ac_delim_num; then
##############################################
gpx-2.6.7/configure-6086-for ac_last_try in false false :; do
gpx-2.6.7/configure:6087: ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
gpx-2.6.7/configure-6088- if test -z "$ac_tt"; then
##############################################
gpx-2.6.7/configure-6218- esac
gpx-2.6.7/configure:6219: case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
gpx-2.6.7/configure-6220- as_fn_append ac_file_inputs " '$ac_f'"
##############################################
gpx-2.6.7/configure-6277-*)
gpx-2.6.7/configure:6278: ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
gpx-2.6.7/configure-6279- # A ".." for each directory in $ac_dir_suffix.
gpx-2.6.7/configure:6280: ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
gpx-2.6.7/configure-6281- case $ac_top_builddir_sub in
##############################################
gpx-2.6.7/configure-6338-/@mandir@/p'
gpx-2.6.7/configure:6339:case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
gpx-2.6.7/configure-6340-*datarootdir*) ac_datarootdir_seen=yes;;
##############################################
gpx-2.6.7/configure-6355-
gpx-2.6.7/configure:6356:# Neutralize VPATH when `$srcdir' = `.'.
gpx-2.6.7/configure-6357-# Shell code in configure.ac might set extrasub.
##############################################
gpx-2.6.7/configure-6383-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
gpx-2.6.7/configure:6384: { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
gpx-2.6.7/configure-6385- { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \
##############################################
gpx-2.6.7/configure-6429- * )
gpx-2.6.7/configure:6430: _am_stamp_count=`expr $_am_stamp_count + 1` ;;
gpx-2.6.7/configure-6431- esac
##############################################
gpx-2.6.7/configure-6484- # Strip MF so we end up with the name of the file.
gpx-2.6.7/configure:6485: am_mf=`$as_echo "$am_mf" | sed -e 's/:.*$//'`
gpx-2.6.7/configure-6486- # Check whether this is an Automake generated Makefile which includes
##############################################
gpx-2.6.7/configure.ac-15-AC_CANONICAL_HOST
gpx-2.6.7/configure.ac:16:AC_SUBST(PLATFORM, [`$ac_aux_dir/archive-name.sh $host_os $host_cpu`])
gpx-2.6.7/configure.ac-17-case $PLATFORM in
##############################################
gpx-2.6.7/src/gpx/Makefile.in-54- { \
gpx-2.6.7/src/gpx/Makefile.in:55: flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
gpx-2.6.7/src/gpx/Makefile.in-56- }; \
##############################################
gpx-2.6.7/src/gpx/Makefile.in-401-.c.o:
gpx-2.6.7/src/gpx/Makefile.in:402:@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
gpx-2.6.7/src/gpx/Makefile.in-403-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
##############################################
gpx-2.6.7/src/gpx/Makefile.in-409-.c.obj:
gpx-2.6.7/src/gpx/Makefile.in:410:@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
gpx-2.6.7/src/gpx/Makefile.in:411:@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\
gpx-2.6.7/src/gpx/Makefile.in-412-@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po
##############################################
gpx-2.6.7/src/gpx/Makefile.in-414-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
gpx-2.6.7/src/gpx/Makefile.in:415:@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
gpx-2.6.7/src/gpx/Makefile.in-416-test-local:
##############################################
gpx-2.6.7/src/gpx/Makefile.in-447-GTAGS:
gpx-2.6.7/src/gpx/Makefile.in:448: here=`$(am__cd) $(top_builddir) && pwd` \
gpx-2.6.7/src/gpx/Makefile.in-449- && $(am__cd) $(top_srcdir) \
##############################################
gpx-2.6.7/src/gpx/Makefile.in-473-distdir-am: $(DISTFILES)
gpx-2.6.7/src/gpx/Makefile.in:474: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
gpx-2.6.7/src/gpx/Makefile.in:475: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
gpx-2.6.7/src/gpx/Makefile.in-476- list='$(DISTFILES)'; \
##############################################
gpx-2.6.7/src/gpx/Makefile.in-487- if test -d $$d/$$file; then \
gpx-2.6.7/src/gpx/Makefile.in:488: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
gpx-2.6.7/src/gpx/Makefile.in-489- if test -d "$(distdir)/$$file"; then \
##############################################
gpx-2.6.7/src/utils/Makefile.in-53- { \
gpx-2.6.7/src/utils/Makefile.in:54: flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
gpx-2.6.7/src/utils/Makefile.in-55- }; \
##############################################
gpx-2.6.7/src/utils/Makefile.in-413-.c.o:
gpx-2.6.7/src/utils/Makefile.in:414:@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
gpx-2.6.7/src/utils/Makefile.in-415-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
##############################################
gpx-2.6.7/src/utils/Makefile.in-421-.c.obj:
gpx-2.6.7/src/utils/Makefile.in:422:@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
gpx-2.6.7/src/utils/Makefile.in:423:@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\
gpx-2.6.7/src/utils/Makefile.in-424-@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po
##############################################
gpx-2.6.7/src/utils/Makefile.in-426-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
gpx-2.6.7/src/utils/Makefile.in:427:@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
gpx-2.6.7/src/utils/Makefile.in-428-test-local:
##############################################
gpx-2.6.7/src/utils/Makefile.in-459-GTAGS:
gpx-2.6.7/src/utils/Makefile.in:460: here=`$(am__cd) $(top_builddir) && pwd` \
gpx-2.6.7/src/utils/Makefile.in-461- && $(am__cd) $(top_srcdir) \
##############################################
gpx-2.6.7/src/utils/Makefile.in-485-distdir-am: $(DISTFILES)
gpx-2.6.7/src/utils/Makefile.in:486: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
gpx-2.6.7/src/utils/Makefile.in:487: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
gpx-2.6.7/src/utils/Makefile.in-488- list='$(DISTFILES)'; \
##############################################
gpx-2.6.7/src/utils/Makefile.in-499- if test -d $$d/$$file; then \
gpx-2.6.7/src/utils/Makefile.in:500: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
gpx-2.6.7/src/utils/Makefile.in-501- if test -d "$(distdir)/$$file"; then \