===========================================================
.___ __ __
_________________ __ __ __| _/|__|/ |_
/ ___\_` __ \__ \ | | \/ __ | | \\_ __\
/ /_/ > | \// __ \| | / /_/ | | || |
\___ /|__| (____ /____/\____ | |__||__|
/_____/ \/ \/
grep rough audit - static analysis tool
v2.8 written by @Wireghoul
=================================[justanotherhacker.com]===
jmtpfs-0.5/INSTALL-182-directory configuration variables that were expressed in terms of
jmtpfs-0.5/INSTALL:183:`${prefix}'. Any directories that were specified during `configure',
jmtpfs-0.5/INSTALL-184-but not in terms of `${prefix}', must each be overridden at install
##############################################
jmtpfs-0.5/Makefile.in-81- while test -n "$$dir1"; do \
jmtpfs-0.5/Makefile.in:82: first=`echo "$$dir1" | sed -e "$$sed_first"`; \
jmtpfs-0.5/Makefile.in-83- if test "$$first" != "."; then \
jmtpfs-0.5/Makefile.in-84- if test "$$first" = ".."; then \
jmtpfs-0.5/Makefile.in:85: dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
jmtpfs-0.5/Makefile.in:86: dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
jmtpfs-0.5/Makefile.in-87- else \
jmtpfs-0.5/Makefile.in:88: first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
jmtpfs-0.5/Makefile.in-89- if test "$$first2" = "$$first"; then \
jmtpfs-0.5/Makefile.in:90: dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
jmtpfs-0.5/Makefile.in-91- else \
##############################################
jmtpfs-0.5/Makefile.in-96- fi; \
jmtpfs-0.5/Makefile.in:97: dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
jmtpfs-0.5/Makefile.in-98- done; \
##############################################
jmtpfs-0.5/Makefile.in-266- dot_seen=no; \
jmtpfs-0.5/Makefile.in:267: target=`echo $@ | sed s/-recursive//`; \
jmtpfs-0.5/Makefile.in-268- list='$(SUBDIRS)'; for subdir in $$list; do \
##############################################
jmtpfs-0.5/Makefile.in-301- rev="$$rev ."; \
jmtpfs-0.5/Makefile.in:302: target=`echo $@ | sed s/-recursive//`; \
jmtpfs-0.5/Makefile.in-303- for subdir in $$rev; do \
##############################################
jmtpfs-0.5/Makefile.in-379-GTAGS:
jmtpfs-0.5/Makefile.in:380: here=`$(am__cd) $(top_builddir) && pwd` \
jmtpfs-0.5/Makefile.in-381- && $(am__cd) $(top_srcdir) \
##############################################
jmtpfs-0.5/Makefile.in-389- test -d "$(distdir)" || mkdir "$(distdir)"
jmtpfs-0.5/Makefile.in:390: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
jmtpfs-0.5/Makefile.in:391: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
jmtpfs-0.5/Makefile.in-392- list='$(DISTFILES)'; \
##############################################
jmtpfs-0.5/Makefile.in-403- if test -d $$d/$$file; then \
jmtpfs-0.5/Makefile.in:404: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
jmtpfs-0.5/Makefile.in-405- if test -d "$(distdir)/$$file"; then \
##############################################
jmtpfs-0.5/Makefile.in-511- test -d $(distdir)/_build || exit 0; \
jmtpfs-0.5/Makefile.in:512: dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
jmtpfs-0.5/Makefile.in-513- && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
##############################################
jmtpfs-0.5/Makefile.in-545- @$(am__cd) '$(distuninstallcheck_dir)' \
jmtpfs-0.5/Makefile.in:546: && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
jmtpfs-0.5/Makefile.in-547- || { echo "ERROR: files left after uninstall:" ; \
##############################################
jmtpfs-0.5/Makefile.in-557- fi
jmtpfs-0.5/Makefile.in:558: @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
jmtpfs-0.5/Makefile.in-559- || { echo "ERROR: files left in build directory after distclean:" ; \
##############################################
jmtpfs-0.5/aclocal.m4-95- PKG_CHECK_EXISTS([$3],
jmtpfs-0.5/aclocal.m4:96: [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`],
jmtpfs-0.5/aclocal.m4-97- [pkg_failed=yes])
##############################################
jmtpfs-0.5/aclocal.m4-143- if test $_pkg_short_errors_supported = yes; then
jmtpfs-0.5/aclocal.m4:144: $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "$2" 2>&1`
jmtpfs-0.5/aclocal.m4-145- else
jmtpfs-0.5/aclocal.m4:146: $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors "$2" 2>&1`
jmtpfs-0.5/aclocal.m4-147- fi
##############################################
jmtpfs-0.5/aclocal.m4-225-# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
jmtpfs-0.5/aclocal.m4:226:# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
jmtpfs-0.5/aclocal.m4-227-#
##############################################
jmtpfs-0.5/aclocal.m4-249-# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
jmtpfs-0.5/aclocal.m4:250:# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
jmtpfs-0.5/aclocal.m4-251-# and then we would define $MISSING as
##############################################
jmtpfs-0.5/aclocal.m4-265-# expand $ac_aux_dir to an absolute path
jmtpfs-0.5/aclocal.m4:266:am_aux_dir=`cd $ac_aux_dir && pwd`
jmtpfs-0.5/aclocal.m4-267-])
##############################################
jmtpfs-0.5/aclocal.m4-366- if test "$am_compiler_list" = ""; then
jmtpfs-0.5/aclocal.m4:367: am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
jmtpfs-0.5/aclocal.m4-368- fi
##############################################
jmtpfs-0.5/aclocal.m4-512- # Strip MF so we end up with the name of the file.
jmtpfs-0.5/aclocal.m4:513: mf=`echo "$mf" | sed -e 's/:.*$//'`
jmtpfs-0.5/aclocal.m4-514- # Check whether this is an Automake generated Makefile or not.
##############################################
jmtpfs-0.5/aclocal.m4-521- if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
jmtpfs-0.5/aclocal.m4:522: dirpart=`AS_DIRNAME("$mf")`
jmtpfs-0.5/aclocal.m4-523- else
##############################################
jmtpfs-0.5/aclocal.m4-527- # from the Makefile without running `make'.
jmtpfs-0.5/aclocal.m4:528: DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
jmtpfs-0.5/aclocal.m4-529- test -z "$DEPDIR" && continue
jmtpfs-0.5/aclocal.m4:530: am__include=`sed -n 's/^am__include = //p' < "$mf"`
jmtpfs-0.5/aclocal.m4-531- test -z "am__include" && continue
jmtpfs-0.5/aclocal.m4:532: am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
jmtpfs-0.5/aclocal.m4-533- # When using ansi2knr, U may be empty or an underscore; expand it
jmtpfs-0.5/aclocal.m4:534: U=`sed -n 's/^U = //p' < "$mf"`
jmtpfs-0.5/aclocal.m4-535- # Find all dependency output files, they are included files with
##############################################
jmtpfs-0.5/aclocal.m4-543- test -f "$dirpart/$file" && continue
jmtpfs-0.5/aclocal.m4:544: fdir=`AS_DIRNAME(["$file"])`
jmtpfs-0.5/aclocal.m4-545- AS_MKDIR_P([$dirpart/$fdir])
##############################################
jmtpfs-0.5/aclocal.m4-598-AC_REQUIRE([AC_PROG_INSTALL])dnl
jmtpfs-0.5/aclocal.m4:599:if test "`cd $srcdir && pwd`" != "`pwd`"; then
jmtpfs-0.5/aclocal.m4-600- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
##############################################
jmtpfs-0.5/aclocal.m4-700- * )
jmtpfs-0.5/aclocal.m4:701: _am_stamp_count=`expr $_am_stamp_count + 1` ;;
jmtpfs-0.5/aclocal.m4-702- esac
jmtpfs-0.5/aclocal.m4-703-done
jmtpfs-0.5/aclocal.m4:704:echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
jmtpfs-0.5/aclocal.m4-705-
##############################################
jmtpfs-0.5/aclocal.m4-775-# Ignore all kinds of additional output from `make'.
jmtpfs-0.5/aclocal.m4:776:case `$am_make -s -f confmf 2> /dev/null` in #(
jmtpfs-0.5/aclocal.m4-777-*the\ am__doit\ target*)
##############################################
jmtpfs-0.5/aclocal.m4-785- echo '.include "confinc"' > confmf
jmtpfs-0.5/aclocal.m4:786: case `$am_make -s -f confmf 2> /dev/null` in #(
jmtpfs-0.5/aclocal.m4-787- *the\ am__doit\ target*)
##############################################
jmtpfs-0.5/aclocal.m4-938-if (
jmtpfs-0.5/aclocal.m4:939: set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
jmtpfs-0.5/aclocal.m4-940- if test "$[*]" = "X"; then
jmtpfs-0.5/aclocal.m4-941- # -L didn't work.
jmtpfs-0.5/aclocal.m4:942: set X `ls -t "$srcdir/configure" conftest.file`
jmtpfs-0.5/aclocal.m4-943- fi
##############################################
jmtpfs-0.5/config.guess-40-
jmtpfs-0.5/config.guess:41:me=`echo "$0" | sed -e 's,.*/,,'`
jmtpfs-0.5/config.guess-42-
##############################################
jmtpfs-0.5/config.guess-109-: ${TMPDIR=/tmp} ;
jmtpfs-0.5/config.guess:110: { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
jmtpfs-0.5/config.guess-111- { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
##############################################
jmtpfs-0.5/config.guess-195- *)
jmtpfs-0.5/config.guess:196: release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
jmtpfs-0.5/config.guess-197- ;;
##############################################
jmtpfs-0.5/config.guess-222- *4.0)
jmtpfs-0.5/config.guess:223: UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
jmtpfs-0.5/config.guess-224- ;;
jmtpfs-0.5/config.guess-225- *5.*)
jmtpfs-0.5/config.guess:226: UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
jmtpfs-0.5/config.guess-227- ;;
##############################################
jmtpfs-0.5/config.guess-232- # types through head -n 1, so we only detect the type of CPU 0.
jmtpfs-0.5/config.guess:233: ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
jmtpfs-0.5/config.guess-234- case "$ALPHA_CPU_TYPE" in
##############################################
jmtpfs-0.5/config.guess-270- # 1.2 uses "1.2" for uname -r.
jmtpfs-0.5/config.guess:271: echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
jmtpfs-0.5/config.guess-272- exit ;;
##############################################
jmtpfs-0.5/config.guess-327- s390x:SunOS:*:*)
jmtpfs-0.5/config.guess:328: echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
jmtpfs-0.5/config.guess-329- exit ;;
jmtpfs-0.5/config.guess-330- sun4H:SunOS:5.*:*)
jmtpfs-0.5/config.guess:331: echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
jmtpfs-0.5/config.guess-332- exit ;;
jmtpfs-0.5/config.guess-333- sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
jmtpfs-0.5/config.guess:334: echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
jmtpfs-0.5/config.guess-335- exit ;;
##############################################
jmtpfs-0.5/config.guess-352- fi
jmtpfs-0.5/config.guess:353: echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
jmtpfs-0.5/config.guess-354- exit ;;
##############################################
jmtpfs-0.5/config.guess-358- # it's likely to be more like Solaris than SunOS4.
jmtpfs-0.5/config.guess:359: echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
jmtpfs-0.5/config.guess-360- exit ;;
##############################################
jmtpfs-0.5/config.guess-367- # Japanese Language versions have a version number like `4.1.3-JL'.
jmtpfs-0.5/config.guess:368: echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
jmtpfs-0.5/config.guess-369- exit ;;
##############################################
jmtpfs-0.5/config.guess-373- sun*:*:4.2BSD:*)
jmtpfs-0.5/config.guess:374: UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
jmtpfs-0.5/config.guess-375- test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
##############################################
jmtpfs-0.5/config.guess-455- $CC_FOR_BUILD -o $dummy $dummy.c &&
jmtpfs-0.5/config.guess:456: dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
jmtpfs-0.5/config.guess:457: SYSTEM_NAME=`$dummy $dummyarg` &&
jmtpfs-0.5/config.guess-458- { echo "$SYSTEM_NAME"; exit; }
##############################################
jmtpfs-0.5/config.guess-511- *:IRIX*:*:*)
jmtpfs-0.5/config.guess:512: echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
jmtpfs-0.5/config.guess-513- exit ;;
##############################################
jmtpfs-0.5/config.guess-541-EOF
jmtpfs-0.5/config.guess:542: if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
jmtpfs-0.5/config.guess-543- then
##############################################
jmtpfs-0.5/config.guess-554- *:AIX:*:[456])
jmtpfs-0.5/config.guess:555: IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
jmtpfs-0.5/config.guess-556- if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
##############################################
jmtpfs-0.5/config.guess-589- 9000/[34678]??:HP-UX:*:*)
jmtpfs-0.5/config.guess:590: HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
jmtpfs-0.5/config.guess-591- case "${UNAME_MACHINE}" in
##############################################
jmtpfs-0.5/config.guess-643-EOF
jmtpfs-0.5/config.guess:644: (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
jmtpfs-0.5/config.guess-645- test -z "$HP_ARCH" && HP_ARCH=hppa
##############################################
jmtpfs-0.5/config.guess-671- ia64:HP-UX:*:*)
jmtpfs-0.5/config.guess:672: HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
jmtpfs-0.5/config.guess-673- echo ia64-hp-hpux${HPUX_REV}
##############################################
jmtpfs-0.5/config.guess-701-EOF
jmtpfs-0.5/config.guess:702: $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
jmtpfs-0.5/config.guess-703- { echo "$SYSTEM_NAME"; exit; }
##############################################
jmtpfs-0.5/config.guess-772- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
jmtpfs-0.5/config.guess:773: FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
jmtpfs-0.5/config.guess-774- echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
##############################################
jmtpfs-0.5/config.guess-777- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
jmtpfs-0.5/config.guess:778: FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
jmtpfs-0.5/config.guess-779- echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
##############################################
jmtpfs-0.5/config.guess-792- pc98)
jmtpfs-0.5/config.guess:793: echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
jmtpfs-0.5/config.guess-794- amd64)
jmtpfs-0.5/config.guess:795: echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
jmtpfs-0.5/config.guess-796- *)
jmtpfs-0.5/config.guess:797: echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
jmtpfs-0.5/config.guess-798- esac
##############################################
jmtpfs-0.5/config.guess-846- prep*:SunOS:5.*:*)
jmtpfs-0.5/config.guess:847: echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
jmtpfs-0.5/config.guess-848- exit ;;
##############################################
jmtpfs-0.5/config.guess-850- # the GNU system
jmtpfs-0.5/config.guess:851: echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
jmtpfs-0.5/config.guess-852- exit ;;
##############################################
jmtpfs-0.5/config.guess-854- # other systems with GNU libc and userland
jmtpfs-0.5/config.guess:855: echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
jmtpfs-0.5/config.guess-856- exit ;;
##############################################
jmtpfs-0.5/config.guess-903-EOF
jmtpfs-0.5/config.guess:904: eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
jmtpfs-0.5/config.guess-905- echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
##############################################
jmtpfs-0.5/config.guess-931-EOF
jmtpfs-0.5/config.guess:932: eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
jmtpfs-0.5/config.guess-933- test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
##############################################
jmtpfs-0.5/config.guess-1013- i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
jmtpfs-0.5/config.guess:1014: UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
jmtpfs-0.5/config.guess-1015- if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
##############################################
jmtpfs-0.5/config.guess-1280- *:DragonFly:*:*)
jmtpfs-0.5/config.guess:1281: echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
jmtpfs-0.5/config.guess-1282- exit ;;
##############################################
jmtpfs-0.5/config.guess-1293- i*86:skyos:*:*)
jmtpfs-0.5/config.guess:1294: echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
jmtpfs-0.5/config.guess-1295- exit ;;
##############################################
jmtpfs-0.5/config.guess-1421-
jmtpfs-0.5/config.guess:1422:$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
jmtpfs-0.5/config.guess-1423- { echo "$SYSTEM_NAME"; exit; }
##############################################
jmtpfs-0.5/config.sub-59-
jmtpfs-0.5/config.sub:60:me=`echo "$0" | sed -e 's,.*/,,'`
jmtpfs-0.5/config.sub-61-
##############################################
jmtpfs-0.5/config.sub-123-# Here we must recognize all the valid KERNEL-OS combinations.
jmtpfs-0.5/config.sub:124:maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
jmtpfs-0.5/config.sub-125-case $maybe_os in
##############################################
jmtpfs-0.5/config.sub-130- os=-$maybe_os
jmtpfs-0.5/config.sub:131: basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
jmtpfs-0.5/config.sub-132- ;;
jmtpfs-0.5/config.sub-133- *)
jmtpfs-0.5/config.sub:134: basic_machine=`echo $1 | sed 's/-[^-]*$//'`
jmtpfs-0.5/config.sub-135- if [ $basic_machine != $1 ]
jmtpfs-0.5/config.sub:136: then os=`echo $1 | sed 's/.*-/-/'`
jmtpfs-0.5/config.sub-137- else os=; fi
##############################################
jmtpfs-0.5/config.sub-184- os=-sco5v6
jmtpfs-0.5/config.sub:185: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
jmtpfs-0.5/config.sub-186- ;;
##############################################
jmtpfs-0.5/config.sub-188- os=-sco3.2v5
jmtpfs-0.5/config.sub:189: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
jmtpfs-0.5/config.sub-190- ;;
##############################################
jmtpfs-0.5/config.sub-192- os=-sco3.2v4
jmtpfs-0.5/config.sub:193: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
jmtpfs-0.5/config.sub-194- ;;
jmtpfs-0.5/config.sub-195- -sco3.2.[4-9]*)
jmtpfs-0.5/config.sub:196: os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
jmtpfs-0.5/config.sub:197: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
jmtpfs-0.5/config.sub-198- ;;
##############################################
jmtpfs-0.5/config.sub-200- # Don't forget version if it is 3.2v4 or newer.
jmtpfs-0.5/config.sub:201: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
jmtpfs-0.5/config.sub-202- ;;
##############################################
jmtpfs-0.5/config.sub-204- # Don't forget version if it is 3.2v4 or newer.
jmtpfs-0.5/config.sub:205: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
jmtpfs-0.5/config.sub-206- ;;
##############################################
jmtpfs-0.5/config.sub-208- os=-sco3.2v2
jmtpfs-0.5/config.sub:209: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
jmtpfs-0.5/config.sub-210- ;;
jmtpfs-0.5/config.sub-211- -udk*)
jmtpfs-0.5/config.sub:212: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
jmtpfs-0.5/config.sub-213- ;;
##############################################
jmtpfs-0.5/config.sub-215- os=-isc2.2
jmtpfs-0.5/config.sub:216: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
jmtpfs-0.5/config.sub-217- ;;
##############################################
jmtpfs-0.5/config.sub-221- -isc*)
jmtpfs-0.5/config.sub:222: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
jmtpfs-0.5/config.sub-223- ;;
##############################################
jmtpfs-0.5/config.sub-227- -ptx*)
jmtpfs-0.5/config.sub:228: basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
jmtpfs-0.5/config.sub-229- ;;
jmtpfs-0.5/config.sub-230- -windowsnt*)
jmtpfs-0.5/config.sub:231: os=`echo $os | sed -e 's/windowsnt/winnt/'`
jmtpfs-0.5/config.sub-232- ;;
##############################################
jmtpfs-0.5/config.sub-323- *-*-*)
jmtpfs-0.5/config.sub:324: echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
jmtpfs-0.5/config.sub-325- exit 1
##############################################
jmtpfs-0.5/config.sub-433- amd64-*)
jmtpfs-0.5/config.sub:434: basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
jmtpfs-0.5/config.sub-435- ;;
##############################################
jmtpfs-0.5/config.sub-475- blackfin-*)
jmtpfs-0.5/config.sub:476: basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
jmtpfs-0.5/config.sub-477- os=-linux
##############################################
jmtpfs-0.5/config.sub-678- i*86v32)
jmtpfs-0.5/config.sub:679: basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
jmtpfs-0.5/config.sub-680- os=-sysv32
##############################################
jmtpfs-0.5/config.sub-682- i*86v4*)
jmtpfs-0.5/config.sub:683: basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
jmtpfs-0.5/config.sub-684- os=-sysv4
##############################################
jmtpfs-0.5/config.sub-686- i*86v)
jmtpfs-0.5/config.sub:687: basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
jmtpfs-0.5/config.sub-688- os=-sysv
##############################################
jmtpfs-0.5/config.sub-690- i*86sol2)
jmtpfs-0.5/config.sub:691: basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
jmtpfs-0.5/config.sub-692- os=-solaris2
##############################################
jmtpfs-0.5/config.sub-720- m68knommu-*)
jmtpfs-0.5/config.sub:721: basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
jmtpfs-0.5/config.sub-722- os=-linux
##############################################
jmtpfs-0.5/config.sub-753- mips3*-*)
jmtpfs-0.5/config.sub:754: basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
jmtpfs-0.5/config.sub-755- ;;
jmtpfs-0.5/config.sub-756- mips3*)
jmtpfs-0.5/config.sub:757: basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
jmtpfs-0.5/config.sub-758- ;;
##############################################
jmtpfs-0.5/config.sub-771- ms1-*)
jmtpfs-0.5/config.sub:772: basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
jmtpfs-0.5/config.sub-773- ;;
##############################################
jmtpfs-0.5/config.sub-876- parisc-*)
jmtpfs-0.5/config.sub:877: basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
jmtpfs-0.5/config.sub-878- os=-linux
##############################################
jmtpfs-0.5/config.sub-892- pc98-*)
jmtpfs-0.5/config.sub:893: basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
jmtpfs-0.5/config.sub-894- ;;
##############################################
jmtpfs-0.5/config.sub-907- pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
jmtpfs-0.5/config.sub:908: basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
jmtpfs-0.5/config.sub-909- ;;
jmtpfs-0.5/config.sub-910- pentiumpro-* | p6-* | 6x86-* | athlon-*)
jmtpfs-0.5/config.sub:911: basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
jmtpfs-0.5/config.sub-912- ;;
jmtpfs-0.5/config.sub-913- pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
jmtpfs-0.5/config.sub:914: basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
jmtpfs-0.5/config.sub-915- ;;
jmtpfs-0.5/config.sub-916- pentium4-*)
jmtpfs-0.5/config.sub:917: basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
jmtpfs-0.5/config.sub-918- ;;
##############################################
jmtpfs-0.5/config.sub-925- ;;
jmtpfs-0.5/config.sub:926: ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
jmtpfs-0.5/config.sub-927- ;;
##############################################
jmtpfs-0.5/config.sub-931- ppcle-* | powerpclittle-*)
jmtpfs-0.5/config.sub:932: basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
jmtpfs-0.5/config.sub-933- ;;
##############################################
jmtpfs-0.5/config.sub-935- ;;
jmtpfs-0.5/config.sub:936: ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
jmtpfs-0.5/config.sub-937- ;;
##############################################
jmtpfs-0.5/config.sub-941- ppc64le-* | powerpc64little-*)
jmtpfs-0.5/config.sub:942: basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
jmtpfs-0.5/config.sub-943- ;;
##############################################
jmtpfs-0.5/config.sub-1233- *)
jmtpfs-0.5/config.sub:1234: echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
jmtpfs-0.5/config.sub-1235- exit 1
##############################################
jmtpfs-0.5/config.sub-1241- *-digital*)
jmtpfs-0.5/config.sub:1242: basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
jmtpfs-0.5/config.sub-1243- ;;
jmtpfs-0.5/config.sub-1244- *-commodore*)
jmtpfs-0.5/config.sub:1245: basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
jmtpfs-0.5/config.sub-1246- ;;
##############################################
jmtpfs-0.5/config.sub-1262- -solaris1 | -solaris1.*)
jmtpfs-0.5/config.sub:1263: os=`echo $os | sed -e 's|solaris1|sunos4|'`
jmtpfs-0.5/config.sub-1264- ;;
##############################################
jmtpfs-0.5/config.sub-1274- -gnu/linux*)
jmtpfs-0.5/config.sub:1275: os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
jmtpfs-0.5/config.sub-1276- ;;
##############################################
jmtpfs-0.5/config.sub-1319- -nto*)
jmtpfs-0.5/config.sub:1320: os=`echo $os | sed -e 's|nto|nto-qnx|'`
jmtpfs-0.5/config.sub-1321- ;;
##############################################
jmtpfs-0.5/config.sub-1326- -mac*)
jmtpfs-0.5/config.sub:1327: os=`echo $os | sed -e 's|mac|macos|'`
jmtpfs-0.5/config.sub-1328- ;;
##############################################
jmtpfs-0.5/config.sub-1332- -linux*)
jmtpfs-0.5/config.sub:1333: os=`echo $os | sed -e 's|linux|linux-gnu|'`
jmtpfs-0.5/config.sub-1334- ;;
jmtpfs-0.5/config.sub-1335- -sunos5*)
jmtpfs-0.5/config.sub:1336: os=`echo $os | sed -e 's|sunos5|solaris2|'`
jmtpfs-0.5/config.sub-1337- ;;
jmtpfs-0.5/config.sub-1338- -sunos6*)
jmtpfs-0.5/config.sub:1339: os=`echo $os | sed -e 's|sunos6|solaris3|'`
jmtpfs-0.5/config.sub-1340- ;;
##############################################
jmtpfs-0.5/config.sub-1387- -sinix5.*)
jmtpfs-0.5/config.sub:1388: os=`echo $os | sed -e 's|sinix|sysv|'`
jmtpfs-0.5/config.sub-1389- ;;
##############################################
jmtpfs-0.5/config.sub-1441- # Get rid of the `-' at the beginning of $os.
jmtpfs-0.5/config.sub:1442: os=`echo $os | sed 's/[^-]*-//'`
jmtpfs-0.5/config.sub:1443: echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
jmtpfs-0.5/config.sub-1444- exit 1
##############################################
jmtpfs-0.5/config.sub-1692- esac
jmtpfs-0.5/config.sub:1693: basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
jmtpfs-0.5/config.sub-1694- ;;
##############################################
jmtpfs-0.5/configure-45-if test -z "$BASH_VERSION$ZSH_VERSION" \
jmtpfs-0.5/configure:46: && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
jmtpfs-0.5/configure-47- as_echo='print -r --'
jmtpfs-0.5/configure-48- as_echo_n='print -rn --'
jmtpfs-0.5/configure:49:elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
jmtpfs-0.5/configure-50- as_echo='printf %s\n'
##############################################
jmtpfs-0.5/configure-52-else
jmtpfs-0.5/configure:53: if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
jmtpfs-0.5/configure-54- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
##############################################
jmtpfs-0.5/configure-62- expr "X$arg" : "X\\(.*\\)$as_nl";
jmtpfs-0.5/configure:63: arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
jmtpfs-0.5/configure-64- esac;
##############################################
jmtpfs-0.5/configure-173- eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
jmtpfs-0.5/configure:174: test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
jmtpfs-0.5/configure-175-test \$(( 1 + 1 )) = 2 || exit 1"
##############################################
jmtpfs-0.5/configure-296- case $as_dir in #(
jmtpfs-0.5/configure:297: *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
jmtpfs-0.5/configure-298- *) as_qdir=$as_dir;;
##############################################
jmtpfs-0.5/configure-361- {
jmtpfs-0.5/configure:362: as_val=`expr "$@" || test $? -eq 1`
jmtpfs-0.5/configure-363- }
##############################################
jmtpfs-0.5/configure-368-# ----------------------------------------
jmtpfs-0.5/configure:369:# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
jmtpfs-0.5/configure-370-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
##############################################
jmtpfs-0.5/configure-431- eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
jmtpfs-0.5/configure:432: test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
jmtpfs-0.5/configure-433- # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
##############################################
jmtpfs-0.5/configure-522- esac;
jmtpfs-0.5/configure:523: case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
jmtpfs-0.5/configure-524- ???[sx]*):;;*)false;;esac;fi
##############################################
jmtpfs-0.5/configure-795- case $ac_option in
jmtpfs-0.5/configure:796: *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
jmtpfs-0.5/configure-797- *=) ac_optarg= ;;
##############################################
jmtpfs-0.5/configure-839- -disable-* | --disable-*)
jmtpfs-0.5/configure:840: ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
jmtpfs-0.5/configure-841- # Reject names that are not valid shell variable names.
##############################################
jmtpfs-0.5/configure-844- ac_useropt_orig=$ac_useropt
jmtpfs-0.5/configure:845: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
jmtpfs-0.5/configure-846- case $ac_user_opts in
##############################################
jmtpfs-0.5/configure-865- -enable-* | --enable-*)
jmtpfs-0.5/configure:866: ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
jmtpfs-0.5/configure-867- # Reject names that are not valid shell variable names.
##############################################
jmtpfs-0.5/configure-870- ac_useropt_orig=$ac_useropt
jmtpfs-0.5/configure:871: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
jmtpfs-0.5/configure-872- case $ac_user_opts in
##############################################
jmtpfs-0.5/configure-1069- -with-* | --with-*)
jmtpfs-0.5/configure:1070: ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
jmtpfs-0.5/configure-1071- # Reject names that are not valid shell variable names.
##############################################
jmtpfs-0.5/configure-1074- ac_useropt_orig=$ac_useropt
jmtpfs-0.5/configure:1075: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
jmtpfs-0.5/configure-1076- case $ac_user_opts in
##############################################
jmtpfs-0.5/configure-1085- -without-* | --without-*)
jmtpfs-0.5/configure:1086: ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
jmtpfs-0.5/configure-1087- # Reject names that are not valid shell variable names.
##############################################
jmtpfs-0.5/configure-1090- ac_useropt_orig=$ac_useropt
jmtpfs-0.5/configure:1091: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
jmtpfs-0.5/configure-1092- case $ac_user_opts in
##############################################
jmtpfs-0.5/configure-1123- *=*)
jmtpfs-0.5/configure:1124: ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
jmtpfs-0.5/configure-1125- # Reject names that are not valid shell variable names.
##############################################
jmtpfs-0.5/configure-1144-if test -n "$ac_prev"; then
jmtpfs-0.5/configure:1145: ac_option=--`echo $ac_prev | sed 's/_/-/g'`
jmtpfs-0.5/configure-1146- as_fn_error $? "missing argument to $ac_option"
##############################################
jmtpfs-0.5/configure-1166- */ )
jmtpfs-0.5/configure:1167: ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
jmtpfs-0.5/configure-1168- eval $ac_var=\$ac_val;;
##############################################
jmtpfs-0.5/configure-1203-ac_ls_di=`ls -di .` &&
jmtpfs-0.5/configure:1204:ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
jmtpfs-0.5/configure-1205- as_fn_error $? "working directory cannot be determined"
##############################################
jmtpfs-0.5/configure-1259-case $srcdir in
jmtpfs-0.5/configure:1260:*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
jmtpfs-0.5/configure-1261-esac
##############################################
jmtpfs-0.5/configure-1302-By default, \`make install' will install all the files in
jmtpfs-0.5/configure:1303:\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
jmtpfs-0.5/configure:1304:an installation prefix other than \`$ac_default_prefix' using \`--prefix',
jmtpfs-0.5/configure-1305-for instance \`--prefix=\$HOME'.
##############################################
jmtpfs-0.5/configure-1397-*)
jmtpfs-0.5/configure:1398: ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
jmtpfs-0.5/configure-1399- # A ".." for each directory in $ac_dir_suffix.
jmtpfs-0.5/configure:1400: ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
jmtpfs-0.5/configure-1401- case $ac_top_builddir_sub in
##############################################
jmtpfs-0.5/configure-1852- *\'*)
jmtpfs-0.5/configure:1853: ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
jmtpfs-0.5/configure-1854- esac
##############################################
jmtpfs-0.5/configure-1935- case $ac_val in
jmtpfs-0.5/configure:1936: *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
jmtpfs-0.5/configure-1937- esac
##############################################
jmtpfs-0.5/configure-1950- case $ac_val in
jmtpfs-0.5/configure:1951: *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
jmtpfs-0.5/configure-1952- esac
##############################################
jmtpfs-0.5/configure-2070- set,)
jmtpfs-0.5/configure:2071: { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
jmtpfs-0.5/configure:2072:$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
jmtpfs-0.5/configure-2073- ac_cache_corrupted=: ;;
##############################################
jmtpfs-0.5/configure-2081- # differences in whitespace do not lead to failure.
jmtpfs-0.5/configure:2082: ac_old_val_w=`echo x $ac_old_val`
jmtpfs-0.5/configure:2083: ac_new_val_w=`echo x $ac_new_val`
jmtpfs-0.5/configure-2084- if test "$ac_old_val_w" != "$ac_new_val_w"; then
##############################################
jmtpfs-0.5/configure-2101- case $ac_new_val in
jmtpfs-0.5/configure:2102: *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
jmtpfs-0.5/configure-2103- *) ac_arg=$ac_var=$ac_new_val ;;
##############################################
jmtpfs-0.5/configure-2170-test "x$ac_build_alias" = x &&
jmtpfs-0.5/configure:2171: ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
jmtpfs-0.5/configure-2172-test "x$ac_build_alias" = x &&
jmtpfs-0.5/configure-2173- as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
jmtpfs-0.5/configure:2174:ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
jmtpfs-0.5/configure-2175- as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
##############################################
jmtpfs-0.5/configure-2194-IFS=$ac_save_IFS
jmtpfs-0.5/configure:2195:case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
jmtpfs-0.5/configure-2196-
##############################################
jmtpfs-0.5/configure-2205-else
jmtpfs-0.5/configure:2206: ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
jmtpfs-0.5/configure-2207- as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
##############################################
jmtpfs-0.5/configure-2227-IFS=$ac_save_IFS
jmtpfs-0.5/configure:2228:case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
jmtpfs-0.5/configure-2229-
##############################################
jmtpfs-0.5/configure-2238-else
jmtpfs-0.5/configure:2239: ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` ||
jmtpfs-0.5/configure-2240- as_fn_error $? "$SHELL $ac_aux_dir/config.sub $target_alias failed" "$LINENO" 5
##############################################
jmtpfs-0.5/configure-2260-IFS=$ac_save_IFS
jmtpfs-0.5/configure:2261:case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac
jmtpfs-0.5/configure-2262-
##############################################
jmtpfs-0.5/configure-2389-if (
jmtpfs-0.5/configure:2390: set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
jmtpfs-0.5/configure-2391- if test "$*" = "X"; then
jmtpfs-0.5/configure-2392- # -L didn't work.
jmtpfs-0.5/configure:2393: set X `ls -t "$srcdir/configure" conftest.file`
jmtpfs-0.5/configure-2394- fi
##############################################
jmtpfs-0.5/configure-2425-ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
jmtpfs-0.5/configure:2426:program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
jmtpfs-0.5/configure-2427-
jmtpfs-0.5/configure-2428-# expand $ac_aux_dir to an absolute path
jmtpfs-0.5/configure:2429:am_aux_dir=`cd $ac_aux_dir && pwd`
jmtpfs-0.5/configure-2430-
##############################################
jmtpfs-0.5/configure-2570- { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
jmtpfs-0.5/configure:2571: case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
jmtpfs-0.5/configure-2572- 'mkdir (GNU coreutils) '* | \
##############################################
jmtpfs-0.5/configure-2649-set x ${MAKE-make}
jmtpfs-0.5/configure:2650:ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
jmtpfs-0.5/configure-2651-if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
##############################################
jmtpfs-0.5/configure-2659-# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
jmtpfs-0.5/configure:2660:case `${MAKE-make} -f conftest.make 2>/dev/null` in
jmtpfs-0.5/configure-2661- *@@@%%%=?*=@@@%%%*)
##############################################
jmtpfs-0.5/configure-2686-
jmtpfs-0.5/configure:2687:if test "`cd $srcdir && pwd`" != "`pwd`"; then
jmtpfs-0.5/configure-2688- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
##############################################
jmtpfs-0.5/configure-2904-$as_echo_n "checking whether the C++ compiler works... " >&6; }
jmtpfs-0.5/configure:2905:ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
jmtpfs-0.5/configure-2906-
##############################################
jmtpfs-0.5/configure-2948- then :; else
jmtpfs-0.5/configure:2949: ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
jmtpfs-0.5/configure-2950- fi
##############################################
jmtpfs-0.5/configure-3008- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
jmtpfs-0.5/configure:3009: *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
jmtpfs-0.5/configure-3010- break;;
##############################################
jmtpfs-0.5/configure-3117- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
jmtpfs-0.5/configure:3118: *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
jmtpfs-0.5/configure-3119- break;;
##############################################
jmtpfs-0.5/configure-3276-# Ignore all kinds of additional output from `make'.
jmtpfs-0.5/configure:3277:case `$am_make -s -f confmf 2> /dev/null` in #(
jmtpfs-0.5/configure-3278-*the\ am__doit\ target*)
##############################################
jmtpfs-0.5/configure-3286- echo '.include "confinc"' > confmf
jmtpfs-0.5/configure:3287: case `$am_make -s -f confmf 2> /dev/null` in #(
jmtpfs-0.5/configure-3288- *the\ am__doit\ target*)
##############################################
jmtpfs-0.5/configure-3347- if test "$am_compiler_list" = ""; then
jmtpfs-0.5/configure:3348: am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
jmtpfs-0.5/configure-3349- fi
##############################################
jmtpfs-0.5/configure-3582- test $ac_status = 0; }; then
jmtpfs-0.5/configure:3583: pkg_cv_MTP_CFLAGS=`$PKG_CONFIG --cflags "libmtp >= 1.1.0" 2>/dev/null`
jmtpfs-0.5/configure-3584-else
##############################################
jmtpfs-0.5/configure-3598- test $ac_status = 0; }; then
jmtpfs-0.5/configure:3599: pkg_cv_MTP_LIBS=`$PKG_CONFIG --libs "libmtp >= 1.1.0" 2>/dev/null`
jmtpfs-0.5/configure-3600-else
##############################################
jmtpfs-0.5/configure-3618- if test $_pkg_short_errors_supported = yes; then
jmtpfs-0.5/configure:3619: MTP_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "libmtp >= 1.1.0" 2>&1`
jmtpfs-0.5/configure-3620- else
jmtpfs-0.5/configure:3621: MTP_PKG_ERRORS=`$PKG_CONFIG --print-errors "libmtp >= 1.1.0" 2>&1`
jmtpfs-0.5/configure-3622- fi
##############################################
jmtpfs-0.5/configure-3676- test $ac_status = 0; }; then
jmtpfs-0.5/configure:3677: pkg_cv_FUSE_CFLAGS=`$PKG_CONFIG --cflags "fuse >= 2.6" 2>/dev/null`
jmtpfs-0.5/configure-3678-else
##############################################
jmtpfs-0.5/configure-3692- test $ac_status = 0; }; then
jmtpfs-0.5/configure:3693: pkg_cv_FUSE_LIBS=`$PKG_CONFIG --libs "fuse >= 2.6" 2>/dev/null`
jmtpfs-0.5/configure-3694-else
##############################################
jmtpfs-0.5/configure-3712- if test $_pkg_short_errors_supported = yes; then
jmtpfs-0.5/configure:3713: FUSE_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "fuse >= 2.6" 2>&1`
jmtpfs-0.5/configure-3714- else
jmtpfs-0.5/configure:3715: FUSE_PKG_ERRORS=`$PKG_CONFIG --print-errors "fuse >= 2.6" 2>&1`
jmtpfs-0.5/configure-3716- fi
##############################################
jmtpfs-0.5/configure-4324- if test "$am_compiler_list" = ""; then
jmtpfs-0.5/configure:4325: am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
jmtpfs-0.5/configure-4326- fi
##############################################
jmtpfs-0.5/configure-4626- # Check for GNU $ac_path_GREP
jmtpfs-0.5/configure:4627:case `"$ac_path_GREP" --version 2>&1` in
jmtpfs-0.5/configure-4628-*GNU*)
##############################################
jmtpfs-0.5/configure-4692- # Check for GNU $ac_path_EGREP
jmtpfs-0.5/configure:4693:case `"$ac_path_EGREP" --version 2>&1` in
jmtpfs-0.5/configure-4694-*GNU*)
##############################################
jmtpfs-0.5/configure-4853-do :
jmtpfs-0.5/configure:4854: as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
jmtpfs-0.5/configure-4855-ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
##############################################
jmtpfs-0.5/configure-4858- cat >>confdefs.h <<_ACEOF
jmtpfs-0.5/configure:4859:#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
jmtpfs-0.5/configure-4860-_ACEOF
##############################################
jmtpfs-0.5/configure-5007-'
jmtpfs-0.5/configure:5008:DEFS=`sed -n "$ac_script" confdefs.h`
jmtpfs-0.5/configure-5009-
##############################################
jmtpfs-0.5/configure-5016- ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
jmtpfs-0.5/configure:5017: ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
jmtpfs-0.5/configure-5018- # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
##############################################
jmtpfs-0.5/configure-5103-if test -z "$BASH_VERSION$ZSH_VERSION" \
jmtpfs-0.5/configure:5104: && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
jmtpfs-0.5/configure-5105- as_echo='print -r --'
jmtpfs-0.5/configure-5106- as_echo_n='print -rn --'
jmtpfs-0.5/configure:5107:elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
jmtpfs-0.5/configure-5108- as_echo='printf %s\n'
##############################################
jmtpfs-0.5/configure-5110-else
jmtpfs-0.5/configure:5111: if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
jmtpfs-0.5/configure-5112- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
##############################################
jmtpfs-0.5/configure-5120- expr "X$arg" : "X\\(.*\\)$as_nl";
jmtpfs-0.5/configure:5121: arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
jmtpfs-0.5/configure-5122- esac;
##############################################
jmtpfs-0.5/configure-5197-# ----------------------------------------
jmtpfs-0.5/configure:5198:# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
jmtpfs-0.5/configure-5199-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
##############################################
jmtpfs-0.5/configure-5269- {
jmtpfs-0.5/configure:5270: as_val=`expr "$@" || test $? -eq 1`
jmtpfs-0.5/configure-5271- }
##############################################
jmtpfs-0.5/configure-5373- case $as_dir in #(
jmtpfs-0.5/configure:5374: *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
jmtpfs-0.5/configure-5375- *) as_qdir=$as_dir;;
##############################################
jmtpfs-0.5/configure-5430- esac;
jmtpfs-0.5/configure:5431: case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
jmtpfs-0.5/configure-5432- ???[sx]*):;;*)false;;esac;fi
##############################################
jmtpfs-0.5/configure-5511-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
jmtpfs-0.5/configure:5512:ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
jmtpfs-0.5/configure-5513-ac_cs_version="\\
##############################################
jmtpfs-0.5/configure-5536- --*=?*)
jmtpfs-0.5/configure:5537: ac_option=`expr "X$1" : 'X\([^=]*\)='`
jmtpfs-0.5/configure:5538: ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
jmtpfs-0.5/configure-5539- ac_shift=:
##############################################
jmtpfs-0.5/configure-5541- --*=)
jmtpfs-0.5/configure:5542: ac_option=`expr "X$1" : 'X\([^=]*\)='`
jmtpfs-0.5/configure-5543- ac_optarg=
##############################################
jmtpfs-0.5/configure-5565- case $ac_optarg in
jmtpfs-0.5/configure:5566: *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
jmtpfs-0.5/configure-5567- '') as_fn_error $? "missing file argument" ;;
##############################################
jmtpfs-0.5/configure-5689-fi
jmtpfs-0.5/configure:5690:ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
jmtpfs-0.5/configure-5691-if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
##############################################
jmtpfs-0.5/configure-5706- as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
jmtpfs-0.5/configure:5707:ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
jmtpfs-0.5/configure-5708-ac_delim='%!_!# '
##############################################
jmtpfs-0.5/configure-5712-
jmtpfs-0.5/configure:5713: ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
jmtpfs-0.5/configure-5714- if test $ac_delim_n = $ac_delim_num; then
##############################################
jmtpfs-0.5/configure-5874- esac
jmtpfs-0.5/configure:5875: case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
jmtpfs-0.5/configure-5876- as_fn_append ac_file_inputs " '$ac_f'"
##############################################
jmtpfs-0.5/configure-5933-*)
jmtpfs-0.5/configure:5934: ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
jmtpfs-0.5/configure-5935- # A ".." for each directory in $ac_dir_suffix.
jmtpfs-0.5/configure:5936: ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
jmtpfs-0.5/configure-5937- case $ac_top_builddir_sub in
##############################################
jmtpfs-0.5/configure-5994-/@mandir@/p'
jmtpfs-0.5/configure:5995:case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
jmtpfs-0.5/configure-5996-*datarootdir*) ac_datarootdir_seen=yes;;
##############################################
jmtpfs-0.5/configure-6011-
jmtpfs-0.5/configure:6012:# Neutralize VPATH when `$srcdir' = `.'.
jmtpfs-0.5/configure-6013-# Shell code in configure.ac might set extrasub.
##############################################
jmtpfs-0.5/configure-6039-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
jmtpfs-0.5/configure:6040: { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
jmtpfs-0.5/configure-6041- { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \
##############################################
jmtpfs-0.5/configure-6075- # Strip MF so we end up with the name of the file.
jmtpfs-0.5/configure:6076: mf=`echo "$mf" | sed -e 's/:.*$//'`
jmtpfs-0.5/configure-6077- # Check whether this is an Automake generated Makefile or not.
##############################################
jmtpfs-0.5/configure-6112- # from the Makefile without running `make'.
jmtpfs-0.5/configure:6113: DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
jmtpfs-0.5/configure-6114- test -z "$DEPDIR" && continue
jmtpfs-0.5/configure:6115: am__include=`sed -n 's/^am__include = //p' < "$mf"`
jmtpfs-0.5/configure-6116- test -z "am__include" && continue
jmtpfs-0.5/configure:6117: am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
jmtpfs-0.5/configure-6118- # When using ansi2knr, U may be empty or an underscore; expand it
jmtpfs-0.5/configure:6119: U=`sed -n 's/^U = //p' < "$mf"`
jmtpfs-0.5/configure-6120- # Find all dependency output files, they are included files with
##############################################
jmtpfs-0.5/depcomp-67- sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
jmtpfs-0.5/depcomp:68:tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
jmtpfs-0.5/depcomp-69-
##############################################
jmtpfs-0.5/depcomp-224- # Version 6 uses the directory in both cases.
jmtpfs-0.5/depcomp:225: dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
jmtpfs-0.5/depcomp-226- test "x$dir" = "x$object" && dir=
jmtpfs-0.5/depcomp:227: base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
jmtpfs-0.5/depcomp-228- if test "$libtool" = yes; then
##############################################
jmtpfs-0.5/depcomp-253- # Do two passes, one to just change these to
jmtpfs-0.5/depcomp:254: # `$object: dependent.h' and one to simply `dependent.h:'.
jmtpfs-0.5/depcomp-255- sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
##############################################
jmtpfs-0.5/depcomp-295- # Do two passes, one to just change these to
jmtpfs-0.5/depcomp:296: # `$object: dependent.h' and one to simply `dependent.h:'.
jmtpfs-0.5/depcomp-297- sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
##############################################
jmtpfs-0.5/depcomp-311- # Much of this is similar to the tru64 case; see comments there.
jmtpfs-0.5/depcomp:312: dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
jmtpfs-0.5/depcomp-313- test "x$dir" = "x$object" && dir=
jmtpfs-0.5/depcomp:314: base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
jmtpfs-0.5/depcomp-315- if test "$libtool" = yes; then
##############################################
jmtpfs-0.5/depcomp-355- # Subdirectories are respected.
jmtpfs-0.5/depcomp:356: dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
jmtpfs-0.5/depcomp-357- test "x$dir" = "x$object" && dir=
jmtpfs-0.5/depcomp:358: base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
jmtpfs-0.5/depcomp-359-
##############################################
jmtpfs-0.5/depcomp-501- done
jmtpfs-0.5/depcomp:502: obj_suffix=`echo "$object" | sed 's/^.*\././'`
jmtpfs-0.5/depcomp-503- touch "$tmpdepfile"
##############################################
jmtpfs-0.5/install-sh-217- fi
jmtpfs-0.5/install-sh:218: cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
jmtpfs-0.5/install-sh-219- *)
##############################################
jmtpfs-0.5/install-sh-269- dstdir=$dst
jmtpfs-0.5/install-sh:270: dst=$dstdir/`basename "$src"`
jmtpfs-0.5/install-sh-271- dstdir_status=0
##############################################
jmtpfs-0.5/install-sh-351- # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
jmtpfs-0.5/install-sh:352: ls_ld_tmpdir=`ls -ld "$tmpdir"`
jmtpfs-0.5/install-sh-353- case $ls_ld_tmpdir in
##############################################
jmtpfs-0.5/install-sh-358- $mkdirprog -m$different_mode -p -- "$tmpdir" && {
jmtpfs-0.5/install-sh:359: ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
jmtpfs-0.5/install-sh-360- test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
##############################################
jmtpfs-0.5/install-sh-418- case $prefix in
jmtpfs-0.5/install-sh:419: *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
jmtpfs-0.5/install-sh-420- *) qprefix=$prefix;;
##############################################
jmtpfs-0.5/install-sh-467- if $copy_on_change &&
jmtpfs-0.5/install-sh:468: old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
jmtpfs-0.5/install-sh:469: new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
jmtpfs-0.5/install-sh-470-
##############################################
jmtpfs-0.5/missing-139- # Could not run --version or --help. This is probably someone
jmtpfs-0.5/missing:140: # running `$TOOL --version' or `$TOOL --help' to check whether
jmtpfs-0.5/missing-141- # $TOOL exists and not knowing $TOOL uses missing.
##############################################
jmtpfs-0.5/missing-173- from any GNU archive site."
jmtpfs-0.5/missing:174: files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
jmtpfs-0.5/missing-175- test -z "$files" && files="config.h"
##############################################
jmtpfs-0.5/missing-202- proper tools for further handling them.
jmtpfs-0.5/missing:203: You can get \`$1' as part of \`Autoconf' from any GNU
jmtpfs-0.5/missing-204- archive site."
jmtpfs-0.5/missing-205-
jmtpfs-0.5/missing:206: file=`echo "$*" | sed -n "$sed_output"`
jmtpfs-0.5/missing:207: test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
jmtpfs-0.5/missing-208- if test -f "$file"; then
##############################################
jmtpfs-0.5/missing-231- *.y)
jmtpfs-0.5/missing:232: SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
jmtpfs-0.5/missing-233- if test -f "$SRCFILE"; then
##############################################
jmtpfs-0.5/missing-235- fi
jmtpfs-0.5/missing:236: SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
jmtpfs-0.5/missing-237- if test -f "$SRCFILE"; then
##############################################
jmtpfs-0.5/missing-261- *.l)
jmtpfs-0.5/missing:262: SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
jmtpfs-0.5/missing-263- if test -f "$SRCFILE"; then
##############################################
jmtpfs-0.5/missing-280-
jmtpfs-0.5/missing:281: file=`echo "$*" | sed -n "$sed_output"`
jmtpfs-0.5/missing:282: test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
jmtpfs-0.5/missing-283- if test -f "$file"; then
##############################################
jmtpfs-0.5/missing-300- # The file to touch is that specified with -o ...
jmtpfs-0.5/missing:301: file=`echo "$*" | sed -n "$sed_output"`
jmtpfs-0.5/missing:302: test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
jmtpfs-0.5/missing-303- if test -z "$file"; then
jmtpfs-0.5/missing-304- # ... or it is the one specified with @setfilename ...
jmtpfs-0.5/missing:305: infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
jmtpfs-0.5/missing-306- file=`sed -n '
##############################################
jmtpfs-0.5/missing-312- # ... or it is derived from the source name (dir/f.texi becomes f.info)
jmtpfs-0.5/missing:313: test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
jmtpfs-0.5/missing-314- fi
##############################################
jmtpfs-0.5/missing-336- *o*)
jmtpfs-0.5/missing:337: firstarg=`echo "$firstarg" | sed s/o//`
jmtpfs-0.5/missing-338- tar "$firstarg" "$@" && exit 0
##############################################
jmtpfs-0.5/missing-342- *h*)
jmtpfs-0.5/missing:343: firstarg=`echo "$firstarg" | sed s/h//`
jmtpfs-0.5/missing-344- tar "$firstarg" "$@" && exit 0
##############################################
jmtpfs-0.5/src/Makefile.in-296-.cpp.obj:
jmtpfs-0.5/src/Makefile.in:297:@am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
jmtpfs-0.5/src/Makefile.in-298-@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
##############################################
jmtpfs-0.5/src/Makefile.in-300-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
jmtpfs-0.5/src/Makefile.in:301:@am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
jmtpfs-0.5/src/Makefile.in-302-
jmtpfs-0.5/src/Makefile.in-303-jmtpfs-jmtpfs.o: jmtpfs.cpp
jmtpfs-0.5/src/Makefile.in:304:@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT jmtpfs-jmtpfs.o -MD -MP -MF $(DEPDIR)/jmtpfs-jmtpfs.Tpo -c -o jmtpfs-jmtpfs.o `test -f 'jmtpfs.cpp' || echo '$(srcdir)/'`jmtpfs.cpp
jmtpfs-0.5/src/Makefile.in-305-@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/jmtpfs-jmtpfs.Tpo $(DEPDIR)/jmtpfs-jmtpfs.Po
##############################################
jmtpfs-0.5/src/Makefile.in-307-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
jmtpfs-0.5/src/Makefile.in:308:@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o jmtpfs-jmtpfs.o `test -f 'jmtpfs.cpp' || echo '$(srcdir)/'`jmtpfs.cpp
jmtpfs-0.5/src/Makefile.in-309-
jmtpfs-0.5/src/Makefile.in-310-jmtpfs-jmtpfs.obj: jmtpfs.cpp
jmtpfs-0.5/src/Makefile.in:311:@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT jmtpfs-jmtpfs.obj -MD -MP -MF $(DEPDIR)/jmtpfs-jmtpfs.Tpo -c -o jmtpfs-jmtpfs.obj `if test -f 'jmtpfs.cpp'; then $(CYGPATH_W) 'jmtpfs.cpp'; else $(CYGPATH_W) '$(srcdir)/jmtpfs.cpp'; fi`
jmtpfs-0.5/src/Makefile.in-312-@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/jmtpfs-jmtpfs.Tpo $(DEPDIR)/jmtpfs-jmtpfs.Po
##############################################
jmtpfs-0.5/src/Makefile.in-314-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
jmtpfs-0.5/src/Makefile.in:315:@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o jmtpfs-jmtpfs.obj `if test -f 'jmtpfs.cpp'; then $(CYGPATH_W) 'jmtpfs.cpp'; else $(CYGPATH_W) '$(srcdir)/jmtpfs.cpp'; fi`
jmtpfs-0.5/src/Makefile.in-316-
jmtpfs-0.5/src/Makefile.in-317-jmtpfs-MtpDevice.o: MtpDevice.cpp
jmtpfs-0.5/src/Makefile.in:318:@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT jmtpfs-MtpDevice.o -MD -MP -MF $(DEPDIR)/jmtpfs-MtpDevice.Tpo -c -o jmtpfs-MtpDevice.o `test -f 'MtpDevice.cpp' || echo '$(srcdir)/'`MtpDevice.cpp
jmtpfs-0.5/src/Makefile.in-319-@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/jmtpfs-MtpDevice.Tpo $(DEPDIR)/jmtpfs-MtpDevice.Po
##############################################
jmtpfs-0.5/src/Makefile.in-321-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
jmtpfs-0.5/src/Makefile.in:322:@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o jmtpfs-MtpDevice.o `test -f 'MtpDevice.cpp' || echo '$(srcdir)/'`MtpDevice.cpp
jmtpfs-0.5/src/Makefile.in-323-
jmtpfs-0.5/src/Makefile.in-324-jmtpfs-MtpDevice.obj: MtpDevice.cpp
jmtpfs-0.5/src/Makefile.in:325:@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT jmtpfs-MtpDevice.obj -MD -MP -MF $(DEPDIR)/jmtpfs-MtpDevice.Tpo -c -o jmtpfs-MtpDevice.obj `if test -f 'MtpDevice.cpp'; then $(CYGPATH_W) 'MtpDevice.cpp'; else $(CYGPATH_W) '$(srcdir)/MtpDevice.cpp'; fi`
jmtpfs-0.5/src/Makefile.in-326-@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/jmtpfs-MtpDevice.Tpo $(DEPDIR)/jmtpfs-MtpDevice.Po
##############################################
jmtpfs-0.5/src/Makefile.in-328-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
jmtpfs-0.5/src/Makefile.in:329:@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o jmtpfs-MtpDevice.obj `if test -f 'MtpDevice.cpp'; then $(CYGPATH_W) 'MtpDevice.cpp'; else $(CYGPATH_W) '$(srcdir)/MtpDevice.cpp'; fi`
jmtpfs-0.5/src/Makefile.in-330-
jmtpfs-0.5/src/Makefile.in-331-jmtpfs-ConnectedMtpDevices.o: ConnectedMtpDevices.cpp
jmtpfs-0.5/src/Makefile.in:332:@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT jmtpfs-ConnectedMtpDevices.o -MD -MP -MF $(DEPDIR)/jmtpfs-ConnectedMtpDevices.Tpo -c -o jmtpfs-ConnectedMtpDevices.o `test -f 'ConnectedMtpDevices.cpp' || echo '$(srcdir)/'`ConnectedMtpDevices.cpp
jmtpfs-0.5/src/Makefile.in-333-@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/jmtpfs-ConnectedMtpDevices.Tpo $(DEPDIR)/jmtpfs-ConnectedMtpDevices.Po
##############################################
jmtpfs-0.5/src/Makefile.in-335-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
jmtpfs-0.5/src/Makefile.in:336:@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o jmtpfs-ConnectedMtpDevices.o `test -f 'ConnectedMtpDevices.cpp' || echo '$(srcdir)/'`ConnectedMtpDevices.cpp
jmtpfs-0.5/src/Makefile.in-337-
jmtpfs-0.5/src/Makefile.in-338-jmtpfs-ConnectedMtpDevices.obj: ConnectedMtpDevices.cpp
jmtpfs-0.5/src/Makefile.in:339:@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT jmtpfs-ConnectedMtpDevices.obj -MD -MP -MF $(DEPDIR)/jmtpfs-ConnectedMtpDevices.Tpo -c -o jmtpfs-ConnectedMtpDevices.obj `if test -f 'ConnectedMtpDevices.cpp'; then $(CYGPATH_W) 'ConnectedMtpDevices.cpp'; else $(CYGPATH_W) '$(srcdir)/ConnectedMtpDevices.cpp'; fi`
jmtpfs-0.5/src/Makefile.in-340-@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/jmtpfs-ConnectedMtpDevices.Tpo $(DEPDIR)/jmtpfs-ConnectedMtpDevices.Po
##############################################
jmtpfs-0.5/src/Makefile.in-342-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
jmtpfs-0.5/src/Makefile.in:343:@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o jmtpfs-ConnectedMtpDevices.obj `if test -f 'ConnectedMtpDevices.cpp'; then $(CYGPATH_W) 'ConnectedMtpDevices.cpp'; else $(CYGPATH_W) '$(srcdir)/ConnectedMtpDevices.cpp'; fi`
jmtpfs-0.5/src/Makefile.in-344-
jmtpfs-0.5/src/Makefile.in-345-jmtpfs-Mutex.o: Mutex.cpp
jmtpfs-0.5/src/Makefile.in:346:@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT jmtpfs-Mutex.o -MD -MP -MF $(DEPDIR)/jmtpfs-Mutex.Tpo -c -o jmtpfs-Mutex.o `test -f 'Mutex.cpp' || echo '$(srcdir)/'`Mutex.cpp
jmtpfs-0.5/src/Makefile.in-347-@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/jmtpfs-Mutex.Tpo $(DEPDIR)/jmtpfs-Mutex.Po
##############################################
jmtpfs-0.5/src/Makefile.in-349-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
jmtpfs-0.5/src/Makefile.in:350:@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o jmtpfs-Mutex.o `test -f 'Mutex.cpp' || echo '$(srcdir)/'`Mutex.cpp
jmtpfs-0.5/src/Makefile.in-351-
jmtpfs-0.5/src/Makefile.in-352-jmtpfs-Mutex.obj: Mutex.cpp
jmtpfs-0.5/src/Makefile.in:353:@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT jmtpfs-Mutex.obj -MD -MP -MF $(DEPDIR)/jmtpfs-Mutex.Tpo -c -o jmtpfs-Mutex.obj `if test -f 'Mutex.cpp'; then $(CYGPATH_W) 'Mutex.cpp'; else $(CYGPATH_W) '$(srcdir)/Mutex.cpp'; fi`
jmtpfs-0.5/src/Makefile.in-354-@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/jmtpfs-Mutex.Tpo $(DEPDIR)/jmtpfs-Mutex.Po
##############################################
jmtpfs-0.5/src/Makefile.in-356-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
jmtpfs-0.5/src/Makefile.in:357:@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o jmtpfs-Mutex.obj `if test -f 'Mutex.cpp'; then $(CYGPATH_W) 'Mutex.cpp'; else $(CYGPATH_W) '$(srcdir)/Mutex.cpp'; fi`
jmtpfs-0.5/src/Makefile.in-358-
jmtpfs-0.5/src/Makefile.in-359-jmtpfs-MtpFilesystemPath.o: MtpFilesystemPath.cpp
jmtpfs-0.5/src/Makefile.in:360:@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT jmtpfs-MtpFilesystemPath.o -MD -MP -MF $(DEPDIR)/jmtpfs-MtpFilesystemPath.Tpo -c -o jmtpfs-MtpFilesystemPath.o `test -f 'MtpFilesystemPath.cpp' || echo '$(srcdir)/'`MtpFilesystemPath.cpp
jmtpfs-0.5/src/Makefile.in-361-@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/jmtpfs-MtpFilesystemPath.Tpo $(DEPDIR)/jmtpfs-MtpFilesystemPath.Po
##############################################
jmtpfs-0.5/src/Makefile.in-363-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
jmtpfs-0.5/src/Makefile.in:364:@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o jmtpfs-MtpFilesystemPath.o `test -f 'MtpFilesystemPath.cpp' || echo '$(srcdir)/'`MtpFilesystemPath.cpp
jmtpfs-0.5/src/Makefile.in-365-
jmtpfs-0.5/src/Makefile.in-366-jmtpfs-MtpFilesystemPath.obj: MtpFilesystemPath.cpp
jmtpfs-0.5/src/Makefile.in:367:@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT jmtpfs-MtpFilesystemPath.obj -MD -MP -MF $(DEPDIR)/jmtpfs-MtpFilesystemPath.Tpo -c -o jmtpfs-MtpFilesystemPath.obj `if test -f 'MtpFilesystemPath.cpp'; then $(CYGPATH_W) 'MtpFilesystemPath.cpp'; else $(CYGPATH_W) '$(srcdir)/MtpFilesystemPath.cpp'; fi`
jmtpfs-0.5/src/Makefile.in-368-@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/jmtpfs-MtpFilesystemPath.Tpo $(DEPDIR)/jmtpfs-MtpFilesystemPath.Po
##############################################
jmtpfs-0.5/src/Makefile.in-370-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
jmtpfs-0.5/src/Makefile.in:371:@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o jmtpfs-MtpFilesystemPath.obj `if test -f 'MtpFilesystemPath.cpp'; then $(CYGPATH_W) 'MtpFilesystemPath.cpp'; else $(CYGPATH_W) '$(srcdir)/MtpFilesystemPath.cpp'; fi`
jmtpfs-0.5/src/Makefile.in-372-
jmtpfs-0.5/src/Makefile.in-373-jmtpfs-MtpMetadataCache.o: MtpMetadataCache.cpp
jmtpfs-0.5/src/Makefile.in:374:@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT jmtpfs-MtpMetadataCache.o -MD -MP -MF $(DEPDIR)/jmtpfs-MtpMetadataCache.Tpo -c -o jmtpfs-MtpMetadataCache.o `test -f 'MtpMetadataCache.cpp' || echo '$(srcdir)/'`MtpMetadataCache.cpp
jmtpfs-0.5/src/Makefile.in-375-@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/jmtpfs-MtpMetadataCache.Tpo $(DEPDIR)/jmtpfs-MtpMetadataCache.Po
##############################################
jmtpfs-0.5/src/Makefile.in-377-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
jmtpfs-0.5/src/Makefile.in:378:@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o jmtpfs-MtpMetadataCache.o `test -f 'MtpMetadataCache.cpp' || echo '$(srcdir)/'`MtpMetadataCache.cpp
jmtpfs-0.5/src/Makefile.in-379-
jmtpfs-0.5/src/Makefile.in-380-jmtpfs-MtpMetadataCache.obj: MtpMetadataCache.cpp
jmtpfs-0.5/src/Makefile.in:381:@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT jmtpfs-MtpMetadataCache.obj -MD -MP -MF $(DEPDIR)/jmtpfs-MtpMetadataCache.Tpo -c -o jmtpfs-MtpMetadataCache.obj `if test -f 'MtpMetadataCache.cpp'; then $(CYGPATH_W) 'MtpMetadataCache.cpp'; else $(CYGPATH_W) '$(srcdir)/MtpMetadataCache.cpp'; fi`
jmtpfs-0.5/src/Makefile.in-382-@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/jmtpfs-MtpMetadataCache.Tpo $(DEPDIR)/jmtpfs-MtpMetadataCache.Po
##############################################
jmtpfs-0.5/src/Makefile.in-384-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
jmtpfs-0.5/src/Makefile.in:385:@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o jmtpfs-MtpMetadataCache.obj `if test -f 'MtpMetadataCache.cpp'; then $(CYGPATH_W) 'MtpMetadataCache.cpp'; else $(CYGPATH_W) '$(srcdir)/MtpMetadataCache.cpp'; fi`
jmtpfs-0.5/src/Makefile.in-386-
jmtpfs-0.5/src/Makefile.in-387-jmtpfs-MtpNode.o: MtpNode.cpp
jmtpfs-0.5/src/Makefile.in:388:@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT jmtpfs-MtpNode.o -MD -MP -MF $(DEPDIR)/jmtpfs-MtpNode.Tpo -c -o jmtpfs-MtpNode.o `test -f 'MtpNode.cpp' || echo '$(srcdir)/'`MtpNode.cpp
jmtpfs-0.5/src/Makefile.in-389-@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/jmtpfs-MtpNode.Tpo $(DEPDIR)/jmtpfs-MtpNode.Po
##############################################
jmtpfs-0.5/src/Makefile.in-391-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
jmtpfs-0.5/src/Makefile.in:392:@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o jmtpfs-MtpNode.o `test -f 'MtpNode.cpp' || echo '$(srcdir)/'`MtpNode.cpp
jmtpfs-0.5/src/Makefile.in-393-
jmtpfs-0.5/src/Makefile.in-394-jmtpfs-MtpNode.obj: MtpNode.cpp
jmtpfs-0.5/src/Makefile.in:395:@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT jmtpfs-MtpNode.obj -MD -MP -MF $(DEPDIR)/jmtpfs-MtpNode.Tpo -c -o jmtpfs-MtpNode.obj `if test -f 'MtpNode.cpp'; then $(CYGPATH_W) 'MtpNode.cpp'; else $(CYGPATH_W) '$(srcdir)/MtpNode.cpp'; fi`
jmtpfs-0.5/src/Makefile.in-396-@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/jmtpfs-MtpNode.Tpo $(DEPDIR)/jmtpfs-MtpNode.Po
##############################################
jmtpfs-0.5/src/Makefile.in-398-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
jmtpfs-0.5/src/Makefile.in:399:@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o jmtpfs-MtpNode.obj `if test -f 'MtpNode.cpp'; then $(CYGPATH_W) 'MtpNode.cpp'; else $(CYGPATH_W) '$(srcdir)/MtpNode.cpp'; fi`
jmtpfs-0.5/src/Makefile.in-400-
jmtpfs-0.5/src/Makefile.in-401-jmtpfs-MtpRoot.o: MtpRoot.cpp
jmtpfs-0.5/src/Makefile.in:402:@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT jmtpfs-MtpRoot.o -MD -MP -MF $(DEPDIR)/jmtpfs-MtpRoot.Tpo -c -o jmtpfs-MtpRoot.o `test -f 'MtpRoot.cpp' || echo '$(srcdir)/'`MtpRoot.cpp
jmtpfs-0.5/src/Makefile.in-403-@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/jmtpfs-MtpRoot.Tpo $(DEPDIR)/jmtpfs-MtpRoot.Po
##############################################
jmtpfs-0.5/src/Makefile.in-405-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
jmtpfs-0.5/src/Makefile.in:406:@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o jmtpfs-MtpRoot.o `test -f 'MtpRoot.cpp' || echo '$(srcdir)/'`MtpRoot.cpp
jmtpfs-0.5/src/Makefile.in-407-
jmtpfs-0.5/src/Makefile.in-408-jmtpfs-MtpRoot.obj: MtpRoot.cpp
jmtpfs-0.5/src/Makefile.in:409:@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT jmtpfs-MtpRoot.obj -MD -MP -MF $(DEPDIR)/jmtpfs-MtpRoot.Tpo -c -o jmtpfs-MtpRoot.obj `if test -f 'MtpRoot.cpp'; then $(CYGPATH_W) 'MtpRoot.cpp'; else $(CYGPATH_W) '$(srcdir)/MtpRoot.cpp'; fi`
jmtpfs-0.5/src/Makefile.in-410-@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/jmtpfs-MtpRoot.Tpo $(DEPDIR)/jmtpfs-MtpRoot.Po
##############################################
jmtpfs-0.5/src/Makefile.in-412-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
jmtpfs-0.5/src/Makefile.in:413:@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o jmtpfs-MtpRoot.obj `if test -f 'MtpRoot.cpp'; then $(CYGPATH_W) 'MtpRoot.cpp'; else $(CYGPATH_W) '$(srcdir)/MtpRoot.cpp'; fi`
jmtpfs-0.5/src/Makefile.in-414-
jmtpfs-0.5/src/Makefile.in-415-jmtpfs-MtpLibLock.o: MtpLibLock.cpp
jmtpfs-0.5/src/Makefile.in:416:@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT jmtpfs-MtpLibLock.o -MD -MP -MF $(DEPDIR)/jmtpfs-MtpLibLock.Tpo -c -o jmtpfs-MtpLibLock.o `test -f 'MtpLibLock.cpp' || echo '$(srcdir)/'`MtpLibLock.cpp
jmtpfs-0.5/src/Makefile.in-417-@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/jmtpfs-MtpLibLock.Tpo $(DEPDIR)/jmtpfs-MtpLibLock.Po
##############################################
jmtpfs-0.5/src/Makefile.in-419-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
jmtpfs-0.5/src/Makefile.in:420:@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o jmtpfs-MtpLibLock.o `test -f 'MtpLibLock.cpp' || echo '$(srcdir)/'`MtpLibLock.cpp
jmtpfs-0.5/src/Makefile.in-421-
jmtpfs-0.5/src/Makefile.in-422-jmtpfs-MtpLibLock.obj: MtpLibLock.cpp
jmtpfs-0.5/src/Makefile.in:423:@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT jmtpfs-MtpLibLock.obj -MD -MP -MF $(DEPDIR)/jmtpfs-MtpLibLock.Tpo -c -o jmtpfs-MtpLibLock.obj `if test -f 'MtpLibLock.cpp'; then $(CYGPATH_W) 'MtpLibLock.cpp'; else $(CYGPATH_W) '$(srcdir)/MtpLibLock.cpp'; fi`
jmtpfs-0.5/src/Makefile.in-424-@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/jmtpfs-MtpLibLock.Tpo $(DEPDIR)/jmtpfs-MtpLibLock.Po
##############################################
jmtpfs-0.5/src/Makefile.in-426-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
jmtpfs-0.5/src/Makefile.in:427:@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o jmtpfs-MtpLibLock.obj `if test -f 'MtpLibLock.cpp'; then $(CYGPATH_W) 'MtpLibLock.cpp'; else $(CYGPATH_W) '$(srcdir)/MtpLibLock.cpp'; fi`
jmtpfs-0.5/src/Makefile.in-428-
jmtpfs-0.5/src/Makefile.in-429-jmtpfs-MtpStorage.o: MtpStorage.cpp
jmtpfs-0.5/src/Makefile.in:430:@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT jmtpfs-MtpStorage.o -MD -MP -MF $(DEPDIR)/jmtpfs-MtpStorage.Tpo -c -o jmtpfs-MtpStorage.o `test -f 'MtpStorage.cpp' || echo '$(srcdir)/'`MtpStorage.cpp
jmtpfs-0.5/src/Makefile.in-431-@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/jmtpfs-MtpStorage.Tpo $(DEPDIR)/jmtpfs-MtpStorage.Po
##############################################
jmtpfs-0.5/src/Makefile.in-433-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
jmtpfs-0.5/src/Makefile.in:434:@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o jmtpfs-MtpStorage.o `test -f 'MtpStorage.cpp' || echo '$(srcdir)/'`MtpStorage.cpp
jmtpfs-0.5/src/Makefile.in-435-
jmtpfs-0.5/src/Makefile.in-436-jmtpfs-MtpStorage.obj: MtpStorage.cpp
jmtpfs-0.5/src/Makefile.in:437:@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT jmtpfs-MtpStorage.obj -MD -MP -MF $(DEPDIR)/jmtpfs-MtpStorage.Tpo -c -o jmtpfs-MtpStorage.obj `if test -f 'MtpStorage.cpp'; then $(CYGPATH_W) 'MtpStorage.cpp'; else $(CYGPATH_W) '$(srcdir)/MtpStorage.cpp'; fi`
jmtpfs-0.5/src/Makefile.in-438-@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/jmtpfs-MtpStorage.Tpo $(DEPDIR)/jmtpfs-MtpStorage.Po
##############################################
jmtpfs-0.5/src/Makefile.in-440-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
jmtpfs-0.5/src/Makefile.in:441:@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o jmtpfs-MtpStorage.obj `if test -f 'MtpStorage.cpp'; then $(CYGPATH_W) 'MtpStorage.cpp'; else $(CYGPATH_W) '$(srcdir)/MtpStorage.cpp'; fi`
jmtpfs-0.5/src/Makefile.in-442-
jmtpfs-0.5/src/Makefile.in-443-jmtpfs-MtpFolder.o: MtpFolder.cpp
jmtpfs-0.5/src/Makefile.in:444:@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT jmtpfs-MtpFolder.o -MD -MP -MF $(DEPDIR)/jmtpfs-MtpFolder.Tpo -c -o jmtpfs-MtpFolder.o `test -f 'MtpFolder.cpp' || echo '$(srcdir)/'`MtpFolder.cpp
jmtpfs-0.5/src/Makefile.in-445-@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/jmtpfs-MtpFolder.Tpo $(DEPDIR)/jmtpfs-MtpFolder.Po
##############################################
jmtpfs-0.5/src/Makefile.in-447-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
jmtpfs-0.5/src/Makefile.in:448:@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o jmtpfs-MtpFolder.o `test -f 'MtpFolder.cpp' || echo '$(srcdir)/'`MtpFolder.cpp
jmtpfs-0.5/src/Makefile.in-449-
jmtpfs-0.5/src/Makefile.in-450-jmtpfs-MtpFolder.obj: MtpFolder.cpp
jmtpfs-0.5/src/Makefile.in:451:@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT jmtpfs-MtpFolder.obj -MD -MP -MF $(DEPDIR)/jmtpfs-MtpFolder.Tpo -c -o jmtpfs-MtpFolder.obj `if test -f 'MtpFolder.cpp'; then $(CYGPATH_W) 'MtpFolder.cpp'; else $(CYGPATH_W) '$(srcdir)/MtpFolder.cpp'; fi`
jmtpfs-0.5/src/Makefile.in-452-@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/jmtpfs-MtpFolder.Tpo $(DEPDIR)/jmtpfs-MtpFolder.Po
##############################################
jmtpfs-0.5/src/Makefile.in-454-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
jmtpfs-0.5/src/Makefile.in:455:@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o jmtpfs-MtpFolder.obj `if test -f 'MtpFolder.cpp'; then $(CYGPATH_W) 'MtpFolder.cpp'; else $(CYGPATH_W) '$(srcdir)/MtpFolder.cpp'; fi`
jmtpfs-0.5/src/Makefile.in-456-
jmtpfs-0.5/src/Makefile.in-457-jmtpfs-MtpFile.o: MtpFile.cpp
jmtpfs-0.5/src/Makefile.in:458:@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT jmtpfs-MtpFile.o -MD -MP -MF $(DEPDIR)/jmtpfs-MtpFile.Tpo -c -o jmtpfs-MtpFile.o `test -f 'MtpFile.cpp' || echo '$(srcdir)/'`MtpFile.cpp
jmtpfs-0.5/src/Makefile.in-459-@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/jmtpfs-MtpFile.Tpo $(DEPDIR)/jmtpfs-MtpFile.Po
##############################################
jmtpfs-0.5/src/Makefile.in-461-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
jmtpfs-0.5/src/Makefile.in:462:@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o jmtpfs-MtpFile.o `test -f 'MtpFile.cpp' || echo '$(srcdir)/'`MtpFile.cpp
jmtpfs-0.5/src/Makefile.in-463-
jmtpfs-0.5/src/Makefile.in-464-jmtpfs-MtpFile.obj: MtpFile.cpp
jmtpfs-0.5/src/Makefile.in:465:@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT jmtpfs-MtpFile.obj -MD -MP -MF $(DEPDIR)/jmtpfs-MtpFile.Tpo -c -o jmtpfs-MtpFile.obj `if test -f 'MtpFile.cpp'; then $(CYGPATH_W) 'MtpFile.cpp'; else $(CYGPATH_W) '$(srcdir)/MtpFile.cpp'; fi`
jmtpfs-0.5/src/Makefile.in-466-@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/jmtpfs-MtpFile.Tpo $(DEPDIR)/jmtpfs-MtpFile.Po
##############################################
jmtpfs-0.5/src/Makefile.in-468-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
jmtpfs-0.5/src/Makefile.in:469:@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o jmtpfs-MtpFile.obj `if test -f 'MtpFile.cpp'; then $(CYGPATH_W) 'MtpFile.cpp'; else $(CYGPATH_W) '$(srcdir)/MtpFile.cpp'; fi`
jmtpfs-0.5/src/Makefile.in-470-
jmtpfs-0.5/src/Makefile.in-471-jmtpfs-TemporaryFile.o: TemporaryFile.cpp
jmtpfs-0.5/src/Makefile.in:472:@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT jmtpfs-TemporaryFile.o -MD -MP -MF $(DEPDIR)/jmtpfs-TemporaryFile.Tpo -c -o jmtpfs-TemporaryFile.o `test -f 'TemporaryFile.cpp' || echo '$(srcdir)/'`TemporaryFile.cpp
jmtpfs-0.5/src/Makefile.in-473-@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/jmtpfs-TemporaryFile.Tpo $(DEPDIR)/jmtpfs-TemporaryFile.Po
##############################################
jmtpfs-0.5/src/Makefile.in-475-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
jmtpfs-0.5/src/Makefile.in:476:@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o jmtpfs-TemporaryFile.o `test -f 'TemporaryFile.cpp' || echo '$(srcdir)/'`TemporaryFile.cpp
jmtpfs-0.5/src/Makefile.in-477-
jmtpfs-0.5/src/Makefile.in-478-jmtpfs-TemporaryFile.obj: TemporaryFile.cpp
jmtpfs-0.5/src/Makefile.in:479:@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT jmtpfs-TemporaryFile.obj -MD -MP -MF $(DEPDIR)/jmtpfs-TemporaryFile.Tpo -c -o jmtpfs-TemporaryFile.obj `if test -f 'TemporaryFile.cpp'; then $(CYGPATH_W) 'TemporaryFile.cpp'; else $(CYGPATH_W) '$(srcdir)/TemporaryFile.cpp'; fi`
jmtpfs-0.5/src/Makefile.in-480-@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/jmtpfs-TemporaryFile.Tpo $(DEPDIR)/jmtpfs-TemporaryFile.Po
##############################################
jmtpfs-0.5/src/Makefile.in-482-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
jmtpfs-0.5/src/Makefile.in:483:@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o jmtpfs-TemporaryFile.obj `if test -f 'TemporaryFile.cpp'; then $(CYGPATH_W) 'TemporaryFile.cpp'; else $(CYGPATH_W) '$(srcdir)/TemporaryFile.cpp'; fi`
jmtpfs-0.5/src/Makefile.in-484-
jmtpfs-0.5/src/Makefile.in-485-jmtpfs-MtpLocalFileCopy.o: MtpLocalFileCopy.cpp
jmtpfs-0.5/src/Makefile.in:486:@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT jmtpfs-MtpLocalFileCopy.o -MD -MP -MF $(DEPDIR)/jmtpfs-MtpLocalFileCopy.Tpo -c -o jmtpfs-MtpLocalFileCopy.o `test -f 'MtpLocalFileCopy.cpp' || echo '$(srcdir)/'`MtpLocalFileCopy.cpp
jmtpfs-0.5/src/Makefile.in-487-@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/jmtpfs-MtpLocalFileCopy.Tpo $(DEPDIR)/jmtpfs-MtpLocalFileCopy.Po
##############################################
jmtpfs-0.5/src/Makefile.in-489-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
jmtpfs-0.5/src/Makefile.in:490:@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o jmtpfs-MtpLocalFileCopy.o `test -f 'MtpLocalFileCopy.cpp' || echo '$(srcdir)/'`MtpLocalFileCopy.cpp
jmtpfs-0.5/src/Makefile.in-491-
jmtpfs-0.5/src/Makefile.in-492-jmtpfs-MtpLocalFileCopy.obj: MtpLocalFileCopy.cpp
jmtpfs-0.5/src/Makefile.in:493:@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT jmtpfs-MtpLocalFileCopy.obj -MD -MP -MF $(DEPDIR)/jmtpfs-MtpLocalFileCopy.Tpo -c -o jmtpfs-MtpLocalFileCopy.obj `if test -f 'MtpLocalFileCopy.cpp'; then $(CYGPATH_W) 'MtpLocalFileCopy.cpp'; else $(CYGPATH_W) '$(srcdir)/MtpLocalFileCopy.cpp'; fi`
jmtpfs-0.5/src/Makefile.in-494-@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/jmtpfs-MtpLocalFileCopy.Tpo $(DEPDIR)/jmtpfs-MtpLocalFileCopy.Po
##############################################
jmtpfs-0.5/src/Makefile.in-496-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
jmtpfs-0.5/src/Makefile.in:497:@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o jmtpfs-MtpLocalFileCopy.obj `if test -f 'MtpLocalFileCopy.cpp'; then $(CYGPATH_W) 'MtpLocalFileCopy.cpp'; else $(CYGPATH_W) '$(srcdir)/MtpLocalFileCopy.cpp'; fi`
jmtpfs-0.5/src/Makefile.in-498-
jmtpfs-0.5/src/Makefile.in-499-jmtpfs-MtpFuseContext.o: MtpFuseContext.cpp
jmtpfs-0.5/src/Makefile.in:500:@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT jmtpfs-MtpFuseContext.o -MD -MP -MF $(DEPDIR)/jmtpfs-MtpFuseContext.Tpo -c -o jmtpfs-MtpFuseContext.o `test -f 'MtpFuseContext.cpp' || echo '$(srcdir)/'`MtpFuseContext.cpp
jmtpfs-0.5/src/Makefile.in-501-@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/jmtpfs-MtpFuseContext.Tpo $(DEPDIR)/jmtpfs-MtpFuseContext.Po
##############################################
jmtpfs-0.5/src/Makefile.in-503-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
jmtpfs-0.5/src/Makefile.in:504:@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o jmtpfs-MtpFuseContext.o `test -f 'MtpFuseContext.cpp' || echo '$(srcdir)/'`MtpFuseContext.cpp
jmtpfs-0.5/src/Makefile.in-505-
jmtpfs-0.5/src/Makefile.in-506-jmtpfs-MtpFuseContext.obj: MtpFuseContext.cpp
jmtpfs-0.5/src/Makefile.in:507:@am__fastdepCXX_TRUE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT jmtpfs-MtpFuseContext.obj -MD -MP -MF $(DEPDIR)/jmtpfs-MtpFuseContext.Tpo -c -o jmtpfs-MtpFuseContext.obj `if test -f 'MtpFuseContext.cpp'; then $(CYGPATH_W) 'MtpFuseContext.cpp'; else $(CYGPATH_W) '$(srcdir)/MtpFuseContext.cpp'; fi`
jmtpfs-0.5/src/Makefile.in-508-@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/jmtpfs-MtpFuseContext.Tpo $(DEPDIR)/jmtpfs-MtpFuseContext.Po
##############################################
jmtpfs-0.5/src/Makefile.in-510-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
jmtpfs-0.5/src/Makefile.in:511:@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(jmtpfs_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o jmtpfs-MtpFuseContext.obj `if test -f 'MtpFuseContext.cpp'; then $(CYGPATH_W) 'MtpFuseContext.cpp'; else $(CYGPATH_W) '$(srcdir)/MtpFuseContext.cpp'; fi`
jmtpfs-0.5/src/Makefile.in-512-
##############################################
jmtpfs-0.5/src/Makefile.in-557-GTAGS:
jmtpfs-0.5/src/Makefile.in:558: here=`$(am__cd) $(top_builddir) && pwd` \
jmtpfs-0.5/src/Makefile.in-559- && $(am__cd) $(top_srcdir) \
##############################################
jmtpfs-0.5/src/Makefile.in-565-distdir: $(DISTFILES)
jmtpfs-0.5/src/Makefile.in:566: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
jmtpfs-0.5/src/Makefile.in:567: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
jmtpfs-0.5/src/Makefile.in-568- list='$(DISTFILES)'; \
##############################################
jmtpfs-0.5/src/Makefile.in-579- if test -d $$d/$$file; then \
jmtpfs-0.5/src/Makefile.in:580: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
jmtpfs-0.5/src/Makefile.in-581- if test -d "$(distdir)/$$file"; then \