===========================================================
.___ __ __
_________________ __ __ __| _/|__|/ |_
/ ___\_` __ \__ \ | | \/ __ | | \\_ __\
/ /_/ > | \// __ \| | / /_/ | | || |
\___ /|__| (____ /____/\____ | |__||__|
/_____/ \/ \/
grep rough audit - static analysis tool
v2.8 written by @Wireghoul
=================================[justanotherhacker.com]===
mig-1.8+git20200618/configure-45-if test -z "$BASH_VERSION$ZSH_VERSION" \
mig-1.8+git20200618/configure:46: && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
mig-1.8+git20200618/configure-47- as_echo='print -r --'
mig-1.8+git20200618/configure-48- as_echo_n='print -rn --'
mig-1.8+git20200618/configure:49:elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
mig-1.8+git20200618/configure-50- as_echo='printf %s\n'
##############################################
mig-1.8+git20200618/configure-52-else
mig-1.8+git20200618/configure:53: if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
mig-1.8+git20200618/configure-54- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
##############################################
mig-1.8+git20200618/configure-62- expr "X$arg" : "X\\(.*\\)$as_nl";
mig-1.8+git20200618/configure:63: arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
mig-1.8+git20200618/configure-64- esac;
##############################################
mig-1.8+git20200618/configure-199- eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
mig-1.8+git20200618/configure:200: test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
mig-1.8+git20200618/configure-201-test \$(( 1 + 1 )) = 2 || exit 1"
##############################################
mig-1.8+git20200618/configure-327- case $as_dir in #(
mig-1.8+git20200618/configure:328: *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
mig-1.8+git20200618/configure-329- *) as_qdir=$as_dir;;
##############################################
mig-1.8+git20200618/configure-400- {
mig-1.8+git20200618/configure:401: as_val=`expr "$@" || test $? -eq 1`
mig-1.8+git20200618/configure-402- }
##############################################
mig-1.8+git20200618/configure-407-# ----------------------------------------
mig-1.8+git20200618/configure:408:# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
mig-1.8+git20200618/configure-409-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
##############################################
mig-1.8+git20200618/configure-470- eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
mig-1.8+git20200618/configure:471: test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
mig-1.8+git20200618/configure-472- # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
##############################################
mig-1.8+git20200618/configure-780- case $ac_option in
mig-1.8+git20200618/configure:781: *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
mig-1.8+git20200618/configure-782- *=) ac_optarg= ;;
##############################################
mig-1.8+git20200618/configure-824- -disable-* | --disable-*)
mig-1.8+git20200618/configure:825: ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
mig-1.8+git20200618/configure-826- # Reject names that are not valid shell variable names.
##############################################
mig-1.8+git20200618/configure-829- ac_useropt_orig=$ac_useropt
mig-1.8+git20200618/configure:830: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
mig-1.8+git20200618/configure-831- case $ac_user_opts in
##############################################
mig-1.8+git20200618/configure-850- -enable-* | --enable-*)
mig-1.8+git20200618/configure:851: ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
mig-1.8+git20200618/configure-852- # Reject names that are not valid shell variable names.
##############################################
mig-1.8+git20200618/configure-855- ac_useropt_orig=$ac_useropt
mig-1.8+git20200618/configure:856: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
mig-1.8+git20200618/configure-857- case $ac_user_opts in
##############################################
mig-1.8+git20200618/configure-1063- -with-* | --with-*)
mig-1.8+git20200618/configure:1064: ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
mig-1.8+git20200618/configure-1065- # Reject names that are not valid shell variable names.
##############################################
mig-1.8+git20200618/configure-1068- ac_useropt_orig=$ac_useropt
mig-1.8+git20200618/configure:1069: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
mig-1.8+git20200618/configure-1070- case $ac_user_opts in
##############################################
mig-1.8+git20200618/configure-1079- -without-* | --without-*)
mig-1.8+git20200618/configure:1080: ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
mig-1.8+git20200618/configure-1081- # Reject names that are not valid shell variable names.
##############################################
mig-1.8+git20200618/configure-1084- ac_useropt_orig=$ac_useropt
mig-1.8+git20200618/configure:1085: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
mig-1.8+git20200618/configure-1086- case $ac_user_opts in
##############################################
mig-1.8+git20200618/configure-1117- *=*)
mig-1.8+git20200618/configure:1118: ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
mig-1.8+git20200618/configure-1119- # Reject names that are not valid shell variable names.
##############################################
mig-1.8+git20200618/configure-1138-if test -n "$ac_prev"; then
mig-1.8+git20200618/configure:1139: ac_option=--`echo $ac_prev | sed 's/_/-/g'`
mig-1.8+git20200618/configure-1140- as_fn_error $? "missing argument to $ac_option"
##############################################
mig-1.8+git20200618/configure-1160- */ )
mig-1.8+git20200618/configure:1161: ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
mig-1.8+git20200618/configure-1162- eval $ac_var=\$ac_val;;
##############################################
mig-1.8+git20200618/configure-1195-ac_ls_di=`ls -di .` &&
mig-1.8+git20200618/configure:1196:ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
mig-1.8+git20200618/configure-1197- as_fn_error $? "working directory cannot be determined"
##############################################
mig-1.8+git20200618/configure-1251-case $srcdir in
mig-1.8+git20200618/configure:1252:*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
mig-1.8+git20200618/configure-1253-esac
##############################################
mig-1.8+git20200618/configure-1294-By default, \`make install' will install all the files in
mig-1.8+git20200618/configure:1295:\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
mig-1.8+git20200618/configure:1296:an installation prefix other than \`$ac_default_prefix' using \`--prefix',
mig-1.8+git20200618/configure-1297-for instance \`--prefix=\$HOME'.
##############################################
mig-1.8+git20200618/configure-1391-*)
mig-1.8+git20200618/configure:1392: ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
mig-1.8+git20200618/configure-1393- # A ".." for each directory in $ac_dir_suffix.
mig-1.8+git20200618/configure:1394: ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
mig-1.8+git20200618/configure-1395- case $ac_top_builddir_sub in
##############################################
mig-1.8+git20200618/configure-1757- *\'*)
mig-1.8+git20200618/configure:1758: ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
mig-1.8+git20200618/configure-1759- esac
##############################################
mig-1.8+git20200618/configure-1840- case $ac_val in
mig-1.8+git20200618/configure:1841: *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
mig-1.8+git20200618/configure-1842- esac
##############################################
mig-1.8+git20200618/configure-1855- case $ac_val in
mig-1.8+git20200618/configure:1856: *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
mig-1.8+git20200618/configure-1857- esac
##############################################
mig-1.8+git20200618/configure-1975- set,)
mig-1.8+git20200618/configure:1976: { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
mig-1.8+git20200618/configure:1977:$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
mig-1.8+git20200618/configure-1978- ac_cache_corrupted=: ;;
##############################################
mig-1.8+git20200618/configure-1986- # differences in whitespace do not lead to failure.
mig-1.8+git20200618/configure:1987: ac_old_val_w=`echo x $ac_old_val`
mig-1.8+git20200618/configure:1988: ac_new_val_w=`echo x $ac_new_val`
mig-1.8+git20200618/configure-1989- if test "$ac_old_val_w" != "$ac_new_val_w"; then
##############################################
mig-1.8+git20200618/configure-2006- case $ac_new_val in
mig-1.8+git20200618/configure:2007: *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
mig-1.8+git20200618/configure-2008- *) ac_arg=$ac_var=$ac_new_val ;;
##############################################
mig-1.8+git20200618/configure-2075-test "x$ac_build_alias" = x &&
mig-1.8+git20200618/configure:2076: ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
mig-1.8+git20200618/configure-2077-test "x$ac_build_alias" = x &&
mig-1.8+git20200618/configure-2078- as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
mig-1.8+git20200618/configure:2079:ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
mig-1.8+git20200618/configure-2080- as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
##############################################
mig-1.8+git20200618/configure-2099-IFS=$ac_save_IFS
mig-1.8+git20200618/configure:2100:case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
mig-1.8+git20200618/configure-2101-
##############################################
mig-1.8+git20200618/configure-2110-else
mig-1.8+git20200618/configure:2111: ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
mig-1.8+git20200618/configure-2112- as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
##############################################
mig-1.8+git20200618/configure-2132-IFS=$ac_save_IFS
mig-1.8+git20200618/configure:2133:case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
mig-1.8+git20200618/configure-2134-
##############################################
mig-1.8+git20200618/configure-2143-else
mig-1.8+git20200618/configure:2144: ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` ||
mig-1.8+git20200618/configure-2145- as_fn_error $? "$SHELL $ac_aux_dir/config.sub $target_alias failed" "$LINENO" 5
##############################################
mig-1.8+git20200618/configure-2165-IFS=$ac_save_IFS
mig-1.8+git20200618/configure:2166:case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac
mig-1.8+git20200618/configure-2167-
##############################################
mig-1.8+git20200618/configure-2183-ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
mig-1.8+git20200618/configure:2184:program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
mig-1.8+git20200618/configure-2185-
##############################################
mig-1.8+git20200618/configure-2305- echo "timestamp, slept: $am_has_slept" > conftest.file
mig-1.8+git20200618/configure:2306: set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
mig-1.8+git20200618/configure-2307- if test "$*" = "X"; then
mig-1.8+git20200618/configure-2308- # -L didn't work.
mig-1.8+git20200618/configure:2309: set X `ls -t "$srcdir/configure" conftest.file`
mig-1.8+git20200618/configure-2310- fi
##############################################
mig-1.8+git20200618/configure-2349-# Expand $ac_aux_dir to an absolute path.
mig-1.8+git20200618/configure:2350:am_aux_dir=`cd "$ac_aux_dir" && pwd`
mig-1.8+git20200618/configure-2351-
##############################################
mig-1.8+git20200618/configure-2491- as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue
mig-1.8+git20200618/configure:2492: case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
mig-1.8+git20200618/configure-2493- 'mkdir (GNU coreutils) '* | \
##############################################
mig-1.8+git20200618/configure-2564-set x ${MAKE-make}
mig-1.8+git20200618/configure:2565:ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
mig-1.8+git20200618/configure-2566-if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
##############################################
mig-1.8+git20200618/configure-2574-# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
mig-1.8+git20200618/configure:2575:case `${MAKE-make} -f conftest.make 2>/dev/null` in
mig-1.8+git20200618/configure-2576- *@@@%%%=?*=@@@%%%*)
##############################################
mig-1.8+git20200618/configure-2640-
mig-1.8+git20200618/configure:2641:if test "`cd $srcdir && pwd`" != "`pwd`"; then
mig-1.8+git20200618/configure-2642- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
##############################################
mig-1.8+git20200618/configure-3133-$as_echo_n "checking whether the C compiler works... " >&6; }
mig-1.8+git20200618/configure:3134:ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
mig-1.8+git20200618/configure-3135-
##############################################
mig-1.8+git20200618/configure-3177- then :; else
mig-1.8+git20200618/configure:3178: ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
mig-1.8+git20200618/configure-3179- fi
##############################################
mig-1.8+git20200618/configure-3237- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
mig-1.8+git20200618/configure:3238: *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
mig-1.8+git20200618/configure-3239- break;;
##############################################
mig-1.8+git20200618/configure-3346- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
mig-1.8+git20200618/configure:3347: *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
mig-1.8+git20200618/configure-3348- break;;
##############################################
mig-1.8+git20200618/configure-3727- if test "$am_compiler_list" = ""; then
mig-1.8+git20200618/configure:3728: am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
mig-1.8+git20200618/configure-3729- fi
##############################################
mig-1.8+git20200618/configure-4007-
mig-1.8+git20200618/configure:4008:yacc_is_bison=`$YACC --version | head -n 1 | cut '-d ' -f1`
mig-1.8+git20200618/configure-4009-if [ x"$yacc_is_bison" != x"bison" ]; then
##############################################
mig-1.8+git20200618/configure-4119-/* end confdefs.h. */
mig-1.8+git20200618/configure:4120:`cat $LEX_OUTPUT_ROOT.c`
mig-1.8+git20200618/configure-4121-_ACEOF
##############################################
mig-1.8+git20200618/configure-4152- #define YYTEXT_POINTER 1
mig-1.8+git20200618/configure:4153:`cat $LEX_OUTPUT_ROOT.c`
mig-1.8+git20200618/configure-4154-_ACEOF
##############################################
mig-1.8+git20200618/configure-4239- # Check for GNU $ac_path_GREP
mig-1.8+git20200618/configure:4240:case `"$ac_path_GREP" --version 2>&1` in
mig-1.8+git20200618/configure-4241-*GNU*)
##############################################
mig-1.8+git20200618/configure-4305- # Check for GNU $ac_path_EGREP
mig-1.8+git20200618/configure:4306:case `"$ac_path_EGREP" --version 2>&1` in
mig-1.8+git20200618/configure-4307-*GNU*)
##############################################
mig-1.8+git20200618/configure-4532-
mig-1.8+git20200618/configure:4533:MIGCOM=`echo migcom | sed "$program_transform_name"`
mig-1.8+git20200618/configure-4534-
mig-1.8+git20200618/configure:4535:MIG=`echo mig | sed "$program_transform_name"`
mig-1.8+git20200618/configure-4536-
##############################################
mig-1.8+git20200618/configure-4664-'
mig-1.8+git20200618/configure:4665:DEFS=`sed -n "$ac_script" confdefs.h`
mig-1.8+git20200618/configure-4666-
##############################################
mig-1.8+git20200618/configure-4673- ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
mig-1.8+git20200618/configure:4674: ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
mig-1.8+git20200618/configure-4675- # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
##############################################
mig-1.8+git20200618/configure-4764-if test -z "$BASH_VERSION$ZSH_VERSION" \
mig-1.8+git20200618/configure:4765: && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
mig-1.8+git20200618/configure-4766- as_echo='print -r --'
mig-1.8+git20200618/configure-4767- as_echo_n='print -rn --'
mig-1.8+git20200618/configure:4768:elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
mig-1.8+git20200618/configure-4769- as_echo='printf %s\n'
##############################################
mig-1.8+git20200618/configure-4771-else
mig-1.8+git20200618/configure:4772: if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
mig-1.8+git20200618/configure-4773- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
##############################################
mig-1.8+git20200618/configure-4781- expr "X$arg" : "X\\(.*\\)$as_nl";
mig-1.8+git20200618/configure:4782: arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
mig-1.8+git20200618/configure-4783- esac;
##############################################
mig-1.8+git20200618/configure-4858-# ----------------------------------------
mig-1.8+git20200618/configure:4859:# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
mig-1.8+git20200618/configure-4860-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
##############################################
mig-1.8+git20200618/configure-4930- {
mig-1.8+git20200618/configure:4931: as_val=`expr "$@" || test $? -eq 1`
mig-1.8+git20200618/configure-4932- }
##############################################
mig-1.8+git20200618/configure-5034- case $as_dir in #(
mig-1.8+git20200618/configure:5035: *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
mig-1.8+git20200618/configure-5036- *) as_qdir=$as_dir;;
##############################################
mig-1.8+git20200618/configure-5162-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
mig-1.8+git20200618/configure:5163:ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
mig-1.8+git20200618/configure-5164-ac_cs_version="\\
##############################################
mig-1.8+git20200618/configure-5187- --*=?*)
mig-1.8+git20200618/configure:5188: ac_option=`expr "X$1" : 'X\([^=]*\)='`
mig-1.8+git20200618/configure:5189: ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
mig-1.8+git20200618/configure-5190- ac_shift=:
##############################################
mig-1.8+git20200618/configure-5192- --*=)
mig-1.8+git20200618/configure:5193: ac_option=`expr "X$1" : 'X\([^=]*\)='`
mig-1.8+git20200618/configure-5194- ac_optarg=
##############################################
mig-1.8+git20200618/configure-5216- case $ac_optarg in
mig-1.8+git20200618/configure:5217: *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
mig-1.8+git20200618/configure-5218- '') as_fn_error $? "missing file argument" ;;
##############################################
mig-1.8+git20200618/configure-5344-fi
mig-1.8+git20200618/configure:5345:ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
mig-1.8+git20200618/configure-5346-if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
##############################################
mig-1.8+git20200618/configure-5361- as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
mig-1.8+git20200618/configure:5362:ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
mig-1.8+git20200618/configure-5363-ac_delim='%!_!# '
##############################################
mig-1.8+git20200618/configure-5367-
mig-1.8+git20200618/configure:5368: ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
mig-1.8+git20200618/configure-5369- if test $ac_delim_n = $ac_delim_num; then
##############################################
mig-1.8+git20200618/configure-5529- esac
mig-1.8+git20200618/configure:5530: case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
mig-1.8+git20200618/configure-5531- as_fn_append ac_file_inputs " '$ac_f'"
##############################################
mig-1.8+git20200618/configure-5588-*)
mig-1.8+git20200618/configure:5589: ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
mig-1.8+git20200618/configure-5590- # A ".." for each directory in $ac_dir_suffix.
mig-1.8+git20200618/configure:5591: ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
mig-1.8+git20200618/configure-5592- case $ac_top_builddir_sub in
##############################################
mig-1.8+git20200618/configure-5649-/@mandir@/p'
mig-1.8+git20200618/configure:5650:case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
mig-1.8+git20200618/configure-5651-*datarootdir*) ac_datarootdir_seen=yes;;
##############################################
mig-1.8+git20200618/configure-5666-
mig-1.8+git20200618/configure:5667:# Neutralize VPATH when `$srcdir' = `.'.
mig-1.8+git20200618/configure-5668-# Shell code in configure.ac might set extrasub.
##############################################
mig-1.8+git20200618/configure-5694-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
mig-1.8+git20200618/configure:5695: { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
mig-1.8+git20200618/configure-5696- { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \
##############################################
mig-1.8+git20200618/configure-5738- # Strip MF so we end up with the name of the file.
mig-1.8+git20200618/configure:5739: am_mf=`$as_echo "$am_mf" | sed -e 's/:.*$//'`
mig-1.8+git20200618/configure-5740- # Check whether this is an Automake generated Makefile which includes
##############################################
mig-1.8+git20200618/configure.ac-28-
mig-1.8+git20200618/configure.ac:29:yacc_is_bison=`$YACC --version | head -n 1 | cut '-d ' -f1`
mig-1.8+git20200618/configure.ac-30-[if [ x"$yacc_is_bison" != x"bison" ]; then ]
##############################################
mig-1.8+git20200618/configure.ac-56-
mig-1.8+git20200618/configure.ac:57:[MIGCOM=`echo migcom | sed "$program_transform_name"`]
mig-1.8+git20200618/configure.ac-58-AC_SUBST([MIGCOM])
mig-1.8+git20200618/configure.ac:59:[MIG=`echo mig | sed "$program_transform_name"`]
mig-1.8+git20200618/configure.ac-60-AC_SUBST([MIG])
##############################################
mig-1.8+git20200618/tests/good/Makefile.in-85- { \
mig-1.8+git20200618/tests/good/Makefile.in:86: flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
mig-1.8+git20200618/tests/good/Makefile.in-87- }; \
##############################################
mig-1.8+git20200618/tests/good/Makefile.in-177-}
mig-1.8+git20200618/tests/good/Makefile.in:178:am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
mig-1.8+git20200618/tests/good/Makefile.in-179-am__vpath_adj = case $$p in \
mig-1.8+git20200618/tests/good/Makefile.in:180: $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
mig-1.8+git20200618/tests/good/Makefile.in-181- *) f=$$p;; \
mig-1.8+git20200618/tests/good/Makefile.in-182- esac;
mig-1.8+git20200618/tests/good/Makefile.in:183:am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
mig-1.8+git20200618/tests/good/Makefile.in-184-am__install_max = 40
mig-1.8+git20200618/tests/good/Makefile.in-185-am__nobase_strip_setup = \
mig-1.8+git20200618/tests/good/Makefile.in:186: srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
mig-1.8+git20200618/tests/good/Makefile.in-187-am__nobase_strip = \
##############################################
mig-1.8+git20200618/tests/good/Makefile.in-305-case "$@" in \
mig-1.8+git20200618/tests/good/Makefile.in:306: */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;; \
mig-1.8+git20200618/tests/good/Makefile.in-307- *) am__odir=.;; \
##############################################
mig-1.8+git20200618/tests/good/Makefile.in-335- bases='$(TEST_LOGS)'; \
mig-1.8+git20200618/tests/good/Makefile.in:336: bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
mig-1.8+git20200618/tests/good/Makefile.in:337: bases=`echo $$bases`
mig-1.8+git20200618/tests/good/Makefile.in-338-RECHECK_LOGS = $(TEST_LOGS)
##############################################
mig-1.8+git20200618/tests/good/Makefile.in-351- */*) b='$*';; \
mig-1.8+git20200618/tests/good/Makefile.in:352: *) b=`echo '$@' | sed 's/\.log$$//'`; \
mig-1.8+git20200618/tests/good/Makefile.in-353- esac;; \
##############################################
mig-1.8+git20200618/tests/good/Makefile.in-541- if test -n "$$redo_bases"; then \
mig-1.8+git20200618/tests/good/Makefile.in:542: redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
mig-1.8+git20200618/tests/good/Makefile.in:543: redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
mig-1.8+git20200618/tests/good/Makefile.in-544- if $(am__make_dryrun); then :; else \
##############################################
mig-1.8+git20200618/tests/good/Makefile.in-566- ws='[ ]'; \
mig-1.8+git20200618/tests/good/Makefile.in:567: results=`for b in $$bases; do echo $$b.trs; done`; \
mig-1.8+git20200618/tests/good/Makefile.in-568- test -n "$$results" || results=/dev/null; \
mig-1.8+git20200618/tests/good/Makefile.in:569: all=` grep "^$$ws*:test-result:" $$results | wc -l`; \
mig-1.8+git20200618/tests/good/Makefile.in:570: pass=` grep "^$$ws*:test-result:$$ws*PASS" $$results | wc -l`; \
mig-1.8+git20200618/tests/good/Makefile.in:571: fail=` grep "^$$ws*:test-result:$$ws*FAIL" $$results | wc -l`; \
mig-1.8+git20200618/tests/good/Makefile.in:572: skip=` grep "^$$ws*:test-result:$$ws*SKIP" $$results | wc -l`; \
mig-1.8+git20200618/tests/good/Makefile.in:573: xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
mig-1.8+git20200618/tests/good/Makefile.in:574: xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
mig-1.8+git20200618/tests/good/Makefile.in:575: error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
mig-1.8+git20200618/tests/good/Makefile.in:576: if test `expr $$fail + $$xpass + $$error` -eq 0; then \
mig-1.8+git20200618/tests/good/Makefile.in-577- success=true; \
##############################################
mig-1.8+git20200618/tests/good/Makefile.in-645- @set +e; $(am__set_TESTS_bases); \
mig-1.8+git20200618/tests/good/Makefile.in:646: log_list=`for i in $$bases; do echo $$i.log; done`; \
mig-1.8+git20200618/tests/good/Makefile.in:647: trs_list=`for i in $$bases; do echo $$i.trs; done`; \
mig-1.8+git20200618/tests/good/Makefile.in:648: log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \
mig-1.8+git20200618/tests/good/Makefile.in-649- $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \
##############################################
mig-1.8+git20200618/tests/good/Makefile.in-655- | $(am__list_recheck_tests)` || exit 1; \
mig-1.8+git20200618/tests/good/Makefile.in:656: log_list=`for i in $$bases; do echo $$i.log; done`; \
mig-1.8+git20200618/tests/good/Makefile.in:657: log_list=`echo $$log_list`; \
mig-1.8+git20200618/tests/good/Makefile.in-658- $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
##############################################
mig-1.8+git20200618/tests/good/Makefile.in-680-distdir-am: $(DISTFILES)
mig-1.8+git20200618/tests/good/Makefile.in:681: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
mig-1.8+git20200618/tests/good/Makefile.in:682: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
mig-1.8+git20200618/tests/good/Makefile.in-683- list='$(DISTFILES)'; \
##############################################
mig-1.8+git20200618/tests/good/Makefile.in-694- if test -d $$d/$$file; then \
mig-1.8+git20200618/tests/good/Makefile.in:695: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
mig-1.8+git20200618/tests/good/Makefile.in-696- if test -d "$(distdir)/$$file"; then \
##############################################
mig-1.8+git20200618/tests/bad/Makefile.in-85- { \
mig-1.8+git20200618/tests/bad/Makefile.in:86: flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
mig-1.8+git20200618/tests/bad/Makefile.in-87- }; \
##############################################
mig-1.8+git20200618/tests/bad/Makefile.in-177-}
mig-1.8+git20200618/tests/bad/Makefile.in:178:am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
mig-1.8+git20200618/tests/bad/Makefile.in-179-am__vpath_adj = case $$p in \
mig-1.8+git20200618/tests/bad/Makefile.in:180: $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
mig-1.8+git20200618/tests/bad/Makefile.in-181- *) f=$$p;; \
mig-1.8+git20200618/tests/bad/Makefile.in-182- esac;
mig-1.8+git20200618/tests/bad/Makefile.in:183:am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
mig-1.8+git20200618/tests/bad/Makefile.in-184-am__install_max = 40
mig-1.8+git20200618/tests/bad/Makefile.in-185-am__nobase_strip_setup = \
mig-1.8+git20200618/tests/bad/Makefile.in:186: srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
mig-1.8+git20200618/tests/bad/Makefile.in-187-am__nobase_strip = \
##############################################
mig-1.8+git20200618/tests/bad/Makefile.in-305-case "$@" in \
mig-1.8+git20200618/tests/bad/Makefile.in:306: */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;; \
mig-1.8+git20200618/tests/bad/Makefile.in-307- *) am__odir=.;; \
##############################################
mig-1.8+git20200618/tests/bad/Makefile.in-335- bases='$(TEST_LOGS)'; \
mig-1.8+git20200618/tests/bad/Makefile.in:336: bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
mig-1.8+git20200618/tests/bad/Makefile.in:337: bases=`echo $$bases`
mig-1.8+git20200618/tests/bad/Makefile.in-338-RECHECK_LOGS = $(TEST_LOGS)
##############################################
mig-1.8+git20200618/tests/bad/Makefile.in-351- */*) b='$*';; \
mig-1.8+git20200618/tests/bad/Makefile.in:352: *) b=`echo '$@' | sed 's/\.log$$//'`; \
mig-1.8+git20200618/tests/bad/Makefile.in-353- esac;; \
##############################################
mig-1.8+git20200618/tests/bad/Makefile.in-539- if test -n "$$redo_bases"; then \
mig-1.8+git20200618/tests/bad/Makefile.in:540: redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
mig-1.8+git20200618/tests/bad/Makefile.in:541: redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
mig-1.8+git20200618/tests/bad/Makefile.in-542- if $(am__make_dryrun); then :; else \
##############################################
mig-1.8+git20200618/tests/bad/Makefile.in-564- ws='[ ]'; \
mig-1.8+git20200618/tests/bad/Makefile.in:565: results=`for b in $$bases; do echo $$b.trs; done`; \
mig-1.8+git20200618/tests/bad/Makefile.in-566- test -n "$$results" || results=/dev/null; \
mig-1.8+git20200618/tests/bad/Makefile.in:567: all=` grep "^$$ws*:test-result:" $$results | wc -l`; \
mig-1.8+git20200618/tests/bad/Makefile.in:568: pass=` grep "^$$ws*:test-result:$$ws*PASS" $$results | wc -l`; \
mig-1.8+git20200618/tests/bad/Makefile.in:569: fail=` grep "^$$ws*:test-result:$$ws*FAIL" $$results | wc -l`; \
mig-1.8+git20200618/tests/bad/Makefile.in:570: skip=` grep "^$$ws*:test-result:$$ws*SKIP" $$results | wc -l`; \
mig-1.8+git20200618/tests/bad/Makefile.in:571: xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
mig-1.8+git20200618/tests/bad/Makefile.in:572: xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
mig-1.8+git20200618/tests/bad/Makefile.in:573: error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
mig-1.8+git20200618/tests/bad/Makefile.in:574: if test `expr $$fail + $$xpass + $$error` -eq 0; then \
mig-1.8+git20200618/tests/bad/Makefile.in-575- success=true; \
##############################################
mig-1.8+git20200618/tests/bad/Makefile.in-643- @set +e; $(am__set_TESTS_bases); \
mig-1.8+git20200618/tests/bad/Makefile.in:644: log_list=`for i in $$bases; do echo $$i.log; done`; \
mig-1.8+git20200618/tests/bad/Makefile.in:645: trs_list=`for i in $$bases; do echo $$i.trs; done`; \
mig-1.8+git20200618/tests/bad/Makefile.in:646: log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \
mig-1.8+git20200618/tests/bad/Makefile.in-647- $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \
##############################################
mig-1.8+git20200618/tests/bad/Makefile.in-653- | $(am__list_recheck_tests)` || exit 1; \
mig-1.8+git20200618/tests/bad/Makefile.in:654: log_list=`for i in $$bases; do echo $$i.log; done`; \
mig-1.8+git20200618/tests/bad/Makefile.in:655: log_list=`echo $$log_list`; \
mig-1.8+git20200618/tests/bad/Makefile.in-656- $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
##############################################
mig-1.8+git20200618/tests/bad/Makefile.in-678-distdir-am: $(DISTFILES)
mig-1.8+git20200618/tests/bad/Makefile.in:679: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
mig-1.8+git20200618/tests/bad/Makefile.in:680: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
mig-1.8+git20200618/tests/bad/Makefile.in-681- list='$(DISTFILES)'; \
##############################################
mig-1.8+git20200618/tests/bad/Makefile.in-692- if test -d $$d/$$file; then \
mig-1.8+git20200618/tests/bad/Makefile.in:693: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
mig-1.8+git20200618/tests/bad/Makefile.in-694- if test -d "$(distdir)/$$file"; then \
##############################################
mig-1.8+git20200618/tests/Makefile.in-49- { \
mig-1.8+git20200618/tests/Makefile.in:50: flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
mig-1.8+git20200618/tests/Makefile.in-51- }; \
##############################################
mig-1.8+git20200618/tests/Makefile.in-163- while test -n "$$dir1"; do \
mig-1.8+git20200618/tests/Makefile.in:164: first=`echo "$$dir1" | sed -e "$$sed_first"`; \
mig-1.8+git20200618/tests/Makefile.in-165- if test "$$first" != "."; then \
mig-1.8+git20200618/tests/Makefile.in-166- if test "$$first" = ".."; then \
mig-1.8+git20200618/tests/Makefile.in:167: dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
mig-1.8+git20200618/tests/Makefile.in:168: dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
mig-1.8+git20200618/tests/Makefile.in-169- else \
mig-1.8+git20200618/tests/Makefile.in:170: first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
mig-1.8+git20200618/tests/Makefile.in-171- if test "$$first2" = "$$first"; then \
mig-1.8+git20200618/tests/Makefile.in:172: dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
mig-1.8+git20200618/tests/Makefile.in-173- else \
##############################################
mig-1.8+git20200618/tests/Makefile.in-178- fi; \
mig-1.8+git20200618/tests/Makefile.in:179: dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
mig-1.8+git20200618/tests/Makefile.in-180- done; \
##############################################
mig-1.8+git20200618/tests/Makefile.in-340- dot_seen=no; \
mig-1.8+git20200618/tests/Makefile.in:341: target=`echo $@ | sed s/-recursive//`; \
mig-1.8+git20200618/tests/Makefile.in-342- case "$@" in \
##############################################
mig-1.8+git20200618/tests/Makefile.in-403-GTAGS:
mig-1.8+git20200618/tests/Makefile.in:404: here=`$(am__cd) $(top_builddir) && pwd` \
mig-1.8+git20200618/tests/Makefile.in-405- && $(am__cd) $(top_srcdir) \
##############################################
mig-1.8+git20200618/tests/Makefile.in-429-distdir-am: $(DISTFILES)
mig-1.8+git20200618/tests/Makefile.in:430: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
mig-1.8+git20200618/tests/Makefile.in:431: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
mig-1.8+git20200618/tests/Makefile.in-432- list='$(DISTFILES)'; \
##############################################
mig-1.8+git20200618/tests/Makefile.in-443- if test -d $$d/$$file; then \
mig-1.8+git20200618/tests/Makefile.in:444: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
mig-1.8+git20200618/tests/Makefile.in-445- if test -d "$(distdir)/$$file"; then \
##############################################
mig-1.8+git20200618/tests/generate-only/Makefile.in-85- { \
mig-1.8+git20200618/tests/generate-only/Makefile.in:86: flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
mig-1.8+git20200618/tests/generate-only/Makefile.in-87- }; \
##############################################
mig-1.8+git20200618/tests/generate-only/Makefile.in-177-}
mig-1.8+git20200618/tests/generate-only/Makefile.in:178:am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
mig-1.8+git20200618/tests/generate-only/Makefile.in-179-am__vpath_adj = case $$p in \
mig-1.8+git20200618/tests/generate-only/Makefile.in:180: $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
mig-1.8+git20200618/tests/generate-only/Makefile.in-181- *) f=$$p;; \
mig-1.8+git20200618/tests/generate-only/Makefile.in-182- esac;
mig-1.8+git20200618/tests/generate-only/Makefile.in:183:am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
mig-1.8+git20200618/tests/generate-only/Makefile.in-184-am__install_max = 40
mig-1.8+git20200618/tests/generate-only/Makefile.in-185-am__nobase_strip_setup = \
mig-1.8+git20200618/tests/generate-only/Makefile.in:186: srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
mig-1.8+git20200618/tests/generate-only/Makefile.in-187-am__nobase_strip = \
##############################################
mig-1.8+git20200618/tests/generate-only/Makefile.in-305-case "$@" in \
mig-1.8+git20200618/tests/generate-only/Makefile.in:306: */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;; \
mig-1.8+git20200618/tests/generate-only/Makefile.in-307- *) am__odir=.;; \
##############################################
mig-1.8+git20200618/tests/generate-only/Makefile.in-335- bases='$(TEST_LOGS)'; \
mig-1.8+git20200618/tests/generate-only/Makefile.in:336: bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
mig-1.8+git20200618/tests/generate-only/Makefile.in:337: bases=`echo $$bases`
mig-1.8+git20200618/tests/generate-only/Makefile.in-338-RECHECK_LOGS = $(TEST_LOGS)
##############################################
mig-1.8+git20200618/tests/generate-only/Makefile.in-351- */*) b='$*';; \
mig-1.8+git20200618/tests/generate-only/Makefile.in:352: *) b=`echo '$@' | sed 's/\.log$$//'`; \
mig-1.8+git20200618/tests/generate-only/Makefile.in-353- esac;; \
##############################################
mig-1.8+git20200618/tests/generate-only/Makefile.in-539- if test -n "$$redo_bases"; then \
mig-1.8+git20200618/tests/generate-only/Makefile.in:540: redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
mig-1.8+git20200618/tests/generate-only/Makefile.in:541: redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
mig-1.8+git20200618/tests/generate-only/Makefile.in-542- if $(am__make_dryrun); then :; else \
##############################################
mig-1.8+git20200618/tests/generate-only/Makefile.in-564- ws='[ ]'; \
mig-1.8+git20200618/tests/generate-only/Makefile.in:565: results=`for b in $$bases; do echo $$b.trs; done`; \
mig-1.8+git20200618/tests/generate-only/Makefile.in-566- test -n "$$results" || results=/dev/null; \
mig-1.8+git20200618/tests/generate-only/Makefile.in:567: all=` grep "^$$ws*:test-result:" $$results | wc -l`; \
mig-1.8+git20200618/tests/generate-only/Makefile.in:568: pass=` grep "^$$ws*:test-result:$$ws*PASS" $$results | wc -l`; \
mig-1.8+git20200618/tests/generate-only/Makefile.in:569: fail=` grep "^$$ws*:test-result:$$ws*FAIL" $$results | wc -l`; \
mig-1.8+git20200618/tests/generate-only/Makefile.in:570: skip=` grep "^$$ws*:test-result:$$ws*SKIP" $$results | wc -l`; \
mig-1.8+git20200618/tests/generate-only/Makefile.in:571: xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
mig-1.8+git20200618/tests/generate-only/Makefile.in:572: xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
mig-1.8+git20200618/tests/generate-only/Makefile.in:573: error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
mig-1.8+git20200618/tests/generate-only/Makefile.in:574: if test `expr $$fail + $$xpass + $$error` -eq 0; then \
mig-1.8+git20200618/tests/generate-only/Makefile.in-575- success=true; \
##############################################
mig-1.8+git20200618/tests/generate-only/Makefile.in-643- @set +e; $(am__set_TESTS_bases); \
mig-1.8+git20200618/tests/generate-only/Makefile.in:644: log_list=`for i in $$bases; do echo $$i.log; done`; \
mig-1.8+git20200618/tests/generate-only/Makefile.in:645: trs_list=`for i in $$bases; do echo $$i.trs; done`; \
mig-1.8+git20200618/tests/generate-only/Makefile.in:646: log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \
mig-1.8+git20200618/tests/generate-only/Makefile.in-647- $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \
##############################################
mig-1.8+git20200618/tests/generate-only/Makefile.in-653- | $(am__list_recheck_tests)` || exit 1; \
mig-1.8+git20200618/tests/generate-only/Makefile.in:654: log_list=`for i in $$bases; do echo $$i.log; done`; \
mig-1.8+git20200618/tests/generate-only/Makefile.in:655: log_list=`echo $$log_list`; \
mig-1.8+git20200618/tests/generate-only/Makefile.in-656- $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
##############################################
mig-1.8+git20200618/tests/generate-only/Makefile.in-678-distdir-am: $(DISTFILES)
mig-1.8+git20200618/tests/generate-only/Makefile.in:679: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
mig-1.8+git20200618/tests/generate-only/Makefile.in:680: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
mig-1.8+git20200618/tests/generate-only/Makefile.in-681- list='$(DISTFILES)'; \
##############################################
mig-1.8+git20200618/tests/generate-only/Makefile.in-692- if test -d $$d/$$file; then \
mig-1.8+git20200618/tests/generate-only/Makefile.in:693: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
mig-1.8+git20200618/tests/generate-only/Makefile.in-694- if test -d "$(distdir)/$$file"; then \
##############################################
mig-1.8+git20200618/Makefile.in-51- { \
mig-1.8+git20200618/Makefile.in:52: flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
mig-1.8+git20200618/Makefile.in-53- }; \
##############################################
mig-1.8+git20200618/Makefile.in-114-migcom_DEPENDENCIES =
mig-1.8+git20200618/Makefile.in:115:am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
mig-1.8+git20200618/Makefile.in-116-am__vpath_adj = case $$p in \
mig-1.8+git20200618/Makefile.in:117: $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
mig-1.8+git20200618/Makefile.in-118- *) f=$$p;; \
mig-1.8+git20200618/Makefile.in-119- esac;
mig-1.8+git20200618/Makefile.in:120:am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
mig-1.8+git20200618/Makefile.in-121-am__install_max = 40
mig-1.8+git20200618/Makefile.in-122-am__nobase_strip_setup = \
mig-1.8+git20200618/Makefile.in:123: srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
mig-1.8+git20200618/Makefile.in-124-am__nobase_strip = \
##############################################
mig-1.8+git20200618/Makefile.in-262- while test -n "$$dir1"; do \
mig-1.8+git20200618/Makefile.in:263: first=`echo "$$dir1" | sed -e "$$sed_first"`; \
mig-1.8+git20200618/Makefile.in-264- if test "$$first" != "."; then \
mig-1.8+git20200618/Makefile.in-265- if test "$$first" = ".."; then \
mig-1.8+git20200618/Makefile.in:266: dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
mig-1.8+git20200618/Makefile.in:267: dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
mig-1.8+git20200618/Makefile.in-268- else \
mig-1.8+git20200618/Makefile.in:269: first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
mig-1.8+git20200618/Makefile.in-270- if test "$$first2" = "$$first"; then \
mig-1.8+git20200618/Makefile.in:271: dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
mig-1.8+git20200618/Makefile.in-272- else \
##############################################
mig-1.8+git20200618/Makefile.in-277- fi; \
mig-1.8+git20200618/Makefile.in:278: dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
mig-1.8+git20200618/Makefile.in-279- done; \
##############################################
mig-1.8+git20200618/Makefile.in-574-.c.obj:
mig-1.8+git20200618/Makefile.in:575:@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
mig-1.8+git20200618/Makefile.in-576-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
##############################################
mig-1.8+git20200618/Makefile.in-578-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
mig-1.8+git20200618/Makefile.in:579:@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
mig-1.8+git20200618/Makefile.in-580-
##############################################
mig-1.8+git20200618/Makefile.in-584-.y.c:
mig-1.8+git20200618/Makefile.in:585: $(AM_V_YACC)$(am__skipyacc) $(SHELL) $(YLWRAP) $< y.tab.c $@ y.tab.h `echo $@ | $(am__yacc_c2h)` y.output $*.output -- $(YACCCOMPILE)
mig-1.8+git20200618/Makefile.in-586-
##############################################
mig-1.8+git20200618/Makefile.in-600- dot_seen=no; \
mig-1.8+git20200618/Makefile.in:601: target=`echo $@ | sed s/-recursive//`; \
mig-1.8+git20200618/Makefile.in-602- case "$@" in \
##############################################
mig-1.8+git20200618/Makefile.in-663-GTAGS:
mig-1.8+git20200618/Makefile.in:664: here=`$(am__cd) $(top_builddir) && pwd` \
mig-1.8+git20200618/Makefile.in-665- && $(am__cd) $(top_srcdir) \
##############################################
mig-1.8+git20200618/Makefile.in-698- test -d "$(distdir)" || mkdir "$(distdir)"
mig-1.8+git20200618/Makefile.in:699: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
mig-1.8+git20200618/Makefile.in:700: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
mig-1.8+git20200618/Makefile.in-701- list='$(DISTFILES)'; \
##############################################
mig-1.8+git20200618/Makefile.in-712- if test -d $$d/$$file; then \
mig-1.8+git20200618/Makefile.in:713: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
mig-1.8+git20200618/Makefile.in-714- if test -d "$(distdir)/$$file"; then \
##############################################
mig-1.8+git20200618/Makefile.in-831- test -d $(distdir)/_build || exit 0; \
mig-1.8+git20200618/Makefile.in:832: dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
mig-1.8+git20200618/Makefile.in-833- && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
##############################################
mig-1.8+git20200618/Makefile.in-875- }; \
mig-1.8+git20200618/Makefile.in:876: test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
mig-1.8+git20200618/Makefile.in-877- || { echo "ERROR: files left after uninstall:" ; \
##############################################
mig-1.8+git20200618/Makefile.in-887- fi
mig-1.8+git20200618/Makefile.in:888: @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
mig-1.8+git20200618/Makefile.in-889- || { echo "ERROR: files left in build directory after distclean:" ; \
##############################################
mig-1.8+git20200618/mig.in-121- -MD ) sawMD=1; cppflags="$cppflags $1"; shift;;
mig-1.8+git20200618/mig.in:122: -imacros | -isystem ) cppflags="$cppflags $1 `prj_quote_sh "$2"`"; shift; shift;;
mig-1.8+git20200618/mig.in-123- -cc) cpp="$2"; shift; shift;;
mig-1.8+git20200618/mig.in-124- -migcom) migcom="$2"; shift; shift;;
mig-1.8+git20200618/mig.in:125: -* ) cppflags="$cppflags `prj_quote_sh "$1"`"; shift;;
mig-1.8+git20200618/mig.in-126- * ) files="$files $1"; shift;;
##############################################
mig-1.8+git20200618/mig.in-135- then
mig-1.8+git20200618/mig.in:136: base="`basename "$file"|sed 's%[.][^.]*$%%'`"
mig-1.8+git20200618/mig.in-137- deps=
##############################################
mig-1.8+git20200618/build-aux/install-sh-234- fi
mig-1.8+git20200618/build-aux/install-sh:235: cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
mig-1.8+git20200618/build-aux/install-sh-236- *)
##############################################
mig-1.8+git20200618/build-aux/install-sh-280- dstdir=$dst
mig-1.8+git20200618/build-aux/install-sh:281: dstbase=`basename "$src"`
mig-1.8+git20200618/build-aux/install-sh-282- case $dst in
##############################################
mig-1.8+git20200618/build-aux/install-sh-287- else
mig-1.8+git20200618/build-aux/install-sh:288: dstdir=`dirname "$dst"`
mig-1.8+git20200618/build-aux/install-sh-289- test -d "$dstdir"
##############################################
mig-1.8+git20200618/build-aux/install-sh-354- test_tmpdir="$tmpdir/a"
mig-1.8+git20200618/build-aux/install-sh:355: ls_ld_tmpdir=`ls -ld "$test_tmpdir"`
mig-1.8+git20200618/build-aux/install-sh-356- case $ls_ld_tmpdir in
##############################################
mig-1.8+git20200618/build-aux/install-sh-361- $mkdirprog -m$different_mode -p -- "$test_tmpdir" && {
mig-1.8+git20200618/build-aux/install-sh:362: ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"`
mig-1.8+git20200618/build-aux/install-sh-363- test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
##############################################
mig-1.8+git20200618/build-aux/install-sh-419- case $prefix in
mig-1.8+git20200618/build-aux/install-sh:420: *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
mig-1.8+git20200618/build-aux/install-sh-421- *) qprefix=$prefix;;
##############################################
mig-1.8+git20200618/build-aux/install-sh-479- if $copy_on_change &&
mig-1.8+git20200618/build-aux/install-sh:480: old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
mig-1.8+git20200618/build-aux/install-sh:481: new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
mig-1.8+git20200618/build-aux/install-sh-482- set -f &&
##############################################
mig-1.8+git20200618/build-aux/depcomp-64- case $1 in
mig-1.8+git20200618/build-aux/depcomp:65: */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;;
mig-1.8+git20200618/build-aux/depcomp-66- *) dir=;;
##############################################
mig-1.8+git20200618/build-aux/depcomp-73-{
mig-1.8+git20200618/build-aux/depcomp:74: base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'`
mig-1.8+git20200618/build-aux/depcomp-75-}
##############################################
mig-1.8+git20200618/build-aux/depcomp-126- sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
mig-1.8+git20200618/build-aux/depcomp:127:tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
mig-1.8+git20200618/build-aux/depcomp-128-
##############################################
mig-1.8+git20200618/build-aux/depcomp-405- sleep 1
mig-1.8+git20200618/build-aux/depcomp:406: i=`expr $i - 1`
mig-1.8+git20200618/build-aux/depcomp-407- done
mig-1.8+git20200618/build-aux/depcomp-408- fi
mig-1.8+git20200618/build-aux/depcomp:409: i=`expr $i - 1`
mig-1.8+git20200618/build-aux/depcomp-410- done
##############################################
mig-1.8+git20200618/build-aux/depcomp-425- # Do two passes, one to just change these to
mig-1.8+git20200618/build-aux/depcomp:426: # `$object: dependent.h' and one to simply `dependent.h:'.
mig-1.8+git20200618/build-aux/depcomp-427- sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
##############################################
mig-1.8+git20200618/build-aux/depcomp-659- done
mig-1.8+git20200618/build-aux/depcomp:660: obj_suffix=`echo "$object" | sed 's/^.*\././'`
mig-1.8+git20200618/build-aux/depcomp-661- touch "$tmpdepfile"
##############################################
mig-1.8+git20200618/build-aux/compile-67- mingw/*)
mig-1.8+git20200618/build-aux/compile:68: file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
mig-1.8+git20200618/build-aux/compile-69- ;;
mig-1.8+git20200618/build-aux/compile-70- cygwin/* | msys/*)
mig-1.8+git20200618/build-aux/compile:71: file=`cygpath -m "$file" || echo "$file"`
mig-1.8+git20200618/build-aux/compile-72- ;;
mig-1.8+git20200618/build-aux/compile-73- wine/*)
mig-1.8+git20200618/build-aux/compile:74: file=`winepath -w "$file" || echo "$file"`
mig-1.8+git20200618/build-aux/compile-75- ;;
##############################################
mig-1.8+git20200618/build-aux/compile-310-# Name of file we expect compiler to create.
mig-1.8+git20200618/build-aux/compile:311:cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
mig-1.8+git20200618/build-aux/compile-312-
##############################################
mig-1.8+git20200618/build-aux/compile-316-# object file name, since that is what matters with a parallel build.
mig-1.8+git20200618/build-aux/compile:317:lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
mig-1.8+git20200618/build-aux/compile-318-while true; do
##############################################
mig-1.8+git20200618/build-aux/config.guess-34-
mig-1.8+git20200618/build-aux/config.guess:35:me=`echo "$0" | sed -e 's,.*/,,'`
mig-1.8+git20200618/build-aux/config.guess-36-
##############################################
mig-1.8+git20200618/build-aux/config.guess-102-: ${TMPDIR=/tmp} ;
mig-1.8+git20200618/build-aux/config.guess:103: { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
mig-1.8+git20200618/build-aux/config.guess-104- { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
##############################################
mig-1.8+git20200618/build-aux/config.guess-151- EOF
mig-1.8+git20200618/build-aux/config.guess:152: eval "`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^LIBC' | sed 's, ,,g'`"
mig-1.8+git20200618/build-aux/config.guess-153-
##############################################
mig-1.8+git20200618/build-aux/config.guess-188- earmv*)
mig-1.8+git20200618/build-aux/config.guess:189: arch=`echo "$UNAME_MACHINE_ARCH" | sed -e 's,^e\(armv[0-9]\).*$,\1,'`
mig-1.8+git20200618/build-aux/config.guess:190: endian=`echo "$UNAME_MACHINE_ARCH" | sed -ne 's,^.*\(eb\)$,\1,p'`
mig-1.8+git20200618/build-aux/config.guess-191- machine="${arch}${endian}"-unknown
##############################################
mig-1.8+git20200618/build-aux/config.guess-220- expr='s/^earmv[0-9]/-eabi/;s/eb$//'
mig-1.8+git20200618/build-aux/config.guess:221: abi=`echo "$UNAME_MACHINE_ARCH" | sed -e "$expr"`
mig-1.8+git20200618/build-aux/config.guess-222- ;;
##############################################
mig-1.8+git20200618/build-aux/config.guess-233- *)
mig-1.8+git20200618/build-aux/config.guess:234: release=`echo "$UNAME_RELEASE" | sed -e 's/[-_].*//' | cut -d. -f1,2`
mig-1.8+git20200618/build-aux/config.guess-235- ;;
##############################################
mig-1.8+git20200618/build-aux/config.guess-280- *4.0)
mig-1.8+git20200618/build-aux/config.guess:281: UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
mig-1.8+git20200618/build-aux/config.guess-282- ;;
mig-1.8+git20200618/build-aux/config.guess-283- *5.*)
mig-1.8+git20200618/build-aux/config.guess:284: UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
mig-1.8+git20200618/build-aux/config.guess-285- ;;
##############################################
mig-1.8+git20200618/build-aux/config.guess-290- # types through head -n 1, so we only detect the type of CPU 0.
mig-1.8+git20200618/build-aux/config.guess:291: ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
mig-1.8+git20200618/build-aux/config.guess-292- case "$ALPHA_CPU_TYPE" in
##############################################
mig-1.8+git20200618/build-aux/config.guess-328- # 1.2 uses "1.2" for uname -r.
mig-1.8+git20200618/build-aux/config.guess:329: echo "$UNAME_MACHINE"-dec-osf"`echo "$UNAME_RELEASE" | sed -e 's/^[PVTX]//' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`"
mig-1.8+git20200618/build-aux/config.guess-330- # Reset EXIT trap before exiting to avoid spurious non-zero exit code.
##############################################
mig-1.8+git20200618/build-aux/config.guess-379- s390x:SunOS:*:*)
mig-1.8+git20200618/build-aux/config.guess:380: echo "$UNAME_MACHINE"-ibm-solaris2"`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`"
mig-1.8+git20200618/build-aux/config.guess-381- exit ;;
mig-1.8+git20200618/build-aux/config.guess-382- sun4H:SunOS:5.*:*)
mig-1.8+git20200618/build-aux/config.guess:383: echo sparc-hal-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`"
mig-1.8+git20200618/build-aux/config.guess-384- exit ;;
mig-1.8+git20200618/build-aux/config.guess-385- sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
mig-1.8+git20200618/build-aux/config.guess:386: echo sparc-sun-solaris2"`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`"
mig-1.8+git20200618/build-aux/config.guess-387- exit ;;
##############################################
mig-1.8+git20200618/build-aux/config.guess-404- fi
mig-1.8+git20200618/build-aux/config.guess:405: echo "$SUN_ARCH"-pc-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`"
mig-1.8+git20200618/build-aux/config.guess-406- exit ;;
##############################################
mig-1.8+git20200618/build-aux/config.guess-410- # it's likely to be more like Solaris than SunOS4.
mig-1.8+git20200618/build-aux/config.guess:411: echo sparc-sun-solaris3"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`"
mig-1.8+git20200618/build-aux/config.guess-412- exit ;;
##############################################
mig-1.8+git20200618/build-aux/config.guess-419- # Japanese Language versions have a version number like `4.1.3-JL'.
mig-1.8+git20200618/build-aux/config.guess:420: echo sparc-sun-sunos"`echo "$UNAME_RELEASE"|sed -e 's/-/_/'`"
mig-1.8+git20200618/build-aux/config.guess-421- exit ;;
##############################################
mig-1.8+git20200618/build-aux/config.guess-425- sun*:*:4.2BSD:*)
mig-1.8+git20200618/build-aux/config.guess:426: UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
mig-1.8+git20200618/build-aux/config.guess-427- test "x$UNAME_RELEASE" = x && UNAME_RELEASE=3
##############################################
mig-1.8+git20200618/build-aux/config.guess-507- $CC_FOR_BUILD -o "$dummy" "$dummy.c" &&
mig-1.8+git20200618/build-aux/config.guess:508: dummyarg=`echo "$UNAME_RELEASE" | sed -n 's/\([0-9]*\).*/\1/p'` &&
mig-1.8+git20200618/build-aux/config.guess:509: SYSTEM_NAME=`"$dummy" "$dummyarg"` &&
mig-1.8+git20200618/build-aux/config.guess-510- { echo "$SYSTEM_NAME"; exit; }
##############################################
mig-1.8+git20200618/build-aux/config.guess-563- *:IRIX*:*:*)
mig-1.8+git20200618/build-aux/config.guess:564: echo mips-sgi-irix"`echo "$UNAME_RELEASE"|sed -e 's/-/_/g'`"
mig-1.8+git20200618/build-aux/config.guess-565- exit ;;
##############################################
mig-1.8+git20200618/build-aux/config.guess-593-EOF
mig-1.8+git20200618/build-aux/config.guess:594: if $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"`
mig-1.8+git20200618/build-aux/config.guess-595- then
##############################################
mig-1.8+git20200618/build-aux/config.guess-606- *:AIX:*:[4567])
mig-1.8+git20200618/build-aux/config.guess:607: IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
mig-1.8+git20200618/build-aux/config.guess-608- if /usr/sbin/lsattr -El "$IBM_CPU_ID" | grep ' POWER' >/dev/null 2>&1; then
##############################################
mig-1.8+git20200618/build-aux/config.guess-642- 9000/[34678]??:HP-UX:*:*)
mig-1.8+git20200618/build-aux/config.guess:643: HPUX_REV=`echo "$UNAME_RELEASE"|sed -e 's/[^.]*.[0B]*//'`
mig-1.8+git20200618/build-aux/config.guess-644- case "$UNAME_MACHINE" in
##############################################
mig-1.8+git20200618/build-aux/config.guess-696-EOF
mig-1.8+git20200618/build-aux/config.guess:697: (CCOPTS="" $CC_FOR_BUILD -o "$dummy" "$dummy.c" 2>/dev/null) && HP_ARCH=`"$dummy"`
mig-1.8+git20200618/build-aux/config.guess-698- test -z "$HP_ARCH" && HP_ARCH=hppa
##############################################
mig-1.8+git20200618/build-aux/config.guess-724- ia64:HP-UX:*:*)
mig-1.8+git20200618/build-aux/config.guess:725: HPUX_REV=`echo "$UNAME_RELEASE"|sed -e 's/[^.]*.[0B]*//'`
mig-1.8+git20200618/build-aux/config.guess-726- echo ia64-hp-hpux"$HPUX_REV"
##############################################
mig-1.8+git20200618/build-aux/config.guess-754-EOF
mig-1.8+git20200618/build-aux/config.guess:755: $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"` &&
mig-1.8+git20200618/build-aux/config.guess-756- { echo "$SYSTEM_NAME"; exit; }
##############################################
mig-1.8+git20200618/build-aux/config.guess-825- FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'`
mig-1.8+git20200618/build-aux/config.guess:826: FUJITSU_REL=`echo "$UNAME_RELEASE" | sed -e 's/ /_/'`
mig-1.8+git20200618/build-aux/config.guess-827- echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
##############################################
mig-1.8+git20200618/build-aux/config.guess-830- FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'`
mig-1.8+git20200618/build-aux/config.guess:831: FUJITSU_REL=`echo "$UNAME_RELEASE" | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/ /_/'`
mig-1.8+git20200618/build-aux/config.guess-832- echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
##############################################
mig-1.8+git20200618/build-aux/config.guess-850- esac
mig-1.8+git20200618/build-aux/config.guess:851: echo "$UNAME_PROCESSOR"-unknown-freebsd"`echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`"
mig-1.8+git20200618/build-aux/config.guess-852- exit ;;
##############################################
mig-1.8+git20200618/build-aux/config.guess-886- prep*:SunOS:5.*:*)
mig-1.8+git20200618/build-aux/config.guess:887: echo powerpcle-unknown-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`"
mig-1.8+git20200618/build-aux/config.guess-888- exit ;;
##############################################
mig-1.8+git20200618/build-aux/config.guess-890- # the GNU system
mig-1.8+git20200618/build-aux/config.guess:891: echo "`echo "$UNAME_MACHINE"|sed -e 's,[-/].*$,,'`-unknown-$LIBC`echo "$UNAME_RELEASE"|sed -e 's,/.*$,,'`"
mig-1.8+git20200618/build-aux/config.guess-892- exit ;;
##############################################
mig-1.8+git20200618/build-aux/config.guess-894- # other systems with GNU libc and userland
mig-1.8+git20200618/build-aux/config.guess:895: echo "$UNAME_MACHINE-unknown-`echo "$UNAME_SYSTEM" | sed 's,^[^/]*/,,' | tr "[:upper:]" "[:lower:]"``echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`-$LIBC"
mig-1.8+git20200618/build-aux/config.guess-896- exit ;;
##############################################
mig-1.8+git20200618/build-aux/config.guess-988-EOF
mig-1.8+git20200618/build-aux/config.guess:989: eval "`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^CPU'`"
mig-1.8+git20200618/build-aux/config.guess-990- test "x$CPU" != x && { echo "$CPU-unknown-linux-$LIBC"; exit; }
##############################################
mig-1.8+git20200618/build-aux/config.guess-1092- i*86:*:4.*:*)
mig-1.8+git20200618/build-aux/config.guess:1093: UNAME_REL=`echo "$UNAME_RELEASE" | sed 's/\/MP$//'`
mig-1.8+git20200618/build-aux/config.guess-1094- if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
##############################################
mig-1.8+git20200618/build-aux/config.guess-1295- fi
mig-1.8+git20200618/build-aux/config.guess:1296: if test "`echo "$UNAME_RELEASE" | sed -e 's/\..*//'`" -le 10 ; then
mig-1.8+git20200618/build-aux/config.guess-1297- if [ "$CC_FOR_BUILD" != no_compiler_found ]; then
##############################################
mig-1.8+git20200618/build-aux/config.guess-1393- *:DragonFly:*:*)
mig-1.8+git20200618/build-aux/config.guess:1394: echo "$UNAME_MACHINE"-unknown-dragonfly"`echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`"
mig-1.8+git20200618/build-aux/config.guess-1395- exit ;;
##############################################
mig-1.8+git20200618/build-aux/config.guess-1406- i*86:skyos:*:*)
mig-1.8+git20200618/build-aux/config.guess:1407: echo "$UNAME_MACHINE"-pc-skyos"`echo "$UNAME_RELEASE" | sed -e 's/ .*$//'`"
mig-1.8+git20200618/build-aux/config.guess-1408- exit ;;
##############################################
mig-1.8+git20200618/build-aux/ylwrap-101-# We'll later need for a correct munging of "#line" directives.
mig-1.8+git20200618/build-aux/ylwrap:102:input_sub_rx=`get_dirname "$input" | quote_for_sed`
mig-1.8+git20200618/build-aux/ylwrap-103-case $input in
##############################################
mig-1.8+git20200618/build-aux/ylwrap-111-esac
mig-1.8+git20200618/build-aux/ylwrap:112:input_rx=`get_dirname "$input" | quote_for_sed`
mig-1.8+git20200618/build-aux/ylwrap-113-
##############################################
mig-1.8+git20200618/build-aux/ylwrap-150- shift
mig-1.8+git20200618/build-aux/ylwrap:151: sed_fix_filenames="${sed_fix_filenames}s|"`quote_for_sed "$from"`"|$to|g;"
mig-1.8+git20200618/build-aux/ylwrap:152: sed_fix_header_guards="${sed_fix_header_guards}s|"`guard "$from"`"|"`guard "$to"`"|g;"
mig-1.8+git20200618/build-aux/ylwrap-153-done
##############################################
mig-1.8+git20200618/build-aux/ylwrap-182- do
mig-1.8+git20200618/build-aux/ylwrap:183: to=`printf '%s\n' "$from" | sed "$sed_fix_filenames"`
mig-1.8+git20200618/build-aux/ylwrap-184- if test -f "$from"; then
##############################################
mig-1.8+git20200618/build-aux/ylwrap-198- realtarget=$target
mig-1.8+git20200618/build-aux/ylwrap:199: target=tmp-`printf '%s\n' "$target" | sed 's|.*[\\/]||g'`
mig-1.8+git20200618/build-aux/ylwrap-200- fi
##############################################
mig-1.8+git20200618/build-aux/config.sub-52-
mig-1.8+git20200618/build-aux/config.sub:53:me=`echo "$0" | sed -e 's,.*/,,'`
mig-1.8+git20200618/build-aux/config.sub-54-
##############################################
mig-1.8+git20200618/build-aux/config.sub-114-# Here we must recognize all the valid KERNEL-OS combinations.
mig-1.8+git20200618/build-aux/config.sub:115:maybe_os=`echo "$1" | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
mig-1.8+git20200618/build-aux/config.sub-116-case $maybe_os in
##############################################
mig-1.8+git20200618/build-aux/config.sub-122- os=-$maybe_os
mig-1.8+git20200618/build-aux/config.sub:123: basic_machine=`echo "$1" | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
mig-1.8+git20200618/build-aux/config.sub-124- ;;
##############################################
mig-1.8+git20200618/build-aux/config.sub-126- os=-linux-android
mig-1.8+git20200618/build-aux/config.sub:127: basic_machine=`echo "$1" | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown
mig-1.8+git20200618/build-aux/config.sub-128- ;;
mig-1.8+git20200618/build-aux/config.sub-129- *)
mig-1.8+git20200618/build-aux/config.sub:130: basic_machine=`echo "$1" | sed 's/-[^-]*$//'`
mig-1.8+git20200618/build-aux/config.sub-131- if [ "$basic_machine" != "$1" ]
mig-1.8+git20200618/build-aux/config.sub:132: then os=`echo "$1" | sed 's/.*-/-/'`
mig-1.8+git20200618/build-aux/config.sub-133- else os=; fi
##############################################
mig-1.8+git20200618/build-aux/config.sub-180- os=-sco5v6
mig-1.8+git20200618/build-aux/config.sub:181: basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
mig-1.8+git20200618/build-aux/config.sub-182- ;;
##############################################
mig-1.8+git20200618/build-aux/config.sub-184- os=-sco3.2v5
mig-1.8+git20200618/build-aux/config.sub:185: basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
mig-1.8+git20200618/build-aux/config.sub-186- ;;
##############################################
mig-1.8+git20200618/build-aux/config.sub-188- os=-sco3.2v4
mig-1.8+git20200618/build-aux/config.sub:189: basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
mig-1.8+git20200618/build-aux/config.sub-190- ;;
mig-1.8+git20200618/build-aux/config.sub-191- -sco3.2.[4-9]*)
mig-1.8+git20200618/build-aux/config.sub:192: os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
mig-1.8+git20200618/build-aux/config.sub:193: basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
mig-1.8+git20200618/build-aux/config.sub-194- ;;
##############################################
mig-1.8+git20200618/build-aux/config.sub-196- # Don't forget version if it is 3.2v4 or newer.
mig-1.8+git20200618/build-aux/config.sub:197: basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
mig-1.8+git20200618/build-aux/config.sub-198- ;;
##############################################
mig-1.8+git20200618/build-aux/config.sub-200- # Don't forget version if it is 3.2v4 or newer.
mig-1.8+git20200618/build-aux/config.sub:201: basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
mig-1.8+git20200618/build-aux/config.sub-202- ;;
##############################################
mig-1.8+git20200618/build-aux/config.sub-204- os=-sco3.2v2
mig-1.8+git20200618/build-aux/config.sub:205: basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
mig-1.8+git20200618/build-aux/config.sub-206- ;;
mig-1.8+git20200618/build-aux/config.sub-207- -udk*)
mig-1.8+git20200618/build-aux/config.sub:208: basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
mig-1.8+git20200618/build-aux/config.sub-209- ;;
##############################################
mig-1.8+git20200618/build-aux/config.sub-211- os=-isc2.2
mig-1.8+git20200618/build-aux/config.sub:212: basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
mig-1.8+git20200618/build-aux/config.sub-213- ;;
##############################################
mig-1.8+git20200618/build-aux/config.sub-217- -isc*)
mig-1.8+git20200618/build-aux/config.sub:218: basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
mig-1.8+git20200618/build-aux/config.sub-219- ;;
##############################################
mig-1.8+git20200618/build-aux/config.sub-229- -ptx*)
mig-1.8+git20200618/build-aux/config.sub:230: basic_machine=`echo "$1" | sed -e 's/86-.*/86-sequent/'`
mig-1.8+git20200618/build-aux/config.sub-231- ;;
##############################################
mig-1.8+git20200618/build-aux/config.sub-364- *-*-*)
mig-1.8+git20200618/build-aux/config.sub:365: echo Invalid configuration \`"$1"\': machine \`"$basic_machine"\' not recognized 1>&2
mig-1.8+git20200618/build-aux/config.sub-366- exit 1
##############################################
mig-1.8+git20200618/build-aux/config.sub-493- amd64-*)
mig-1.8+git20200618/build-aux/config.sub:494: basic_machine=x86_64-`echo "$basic_machine" | sed 's/^[^-]*-//'`
mig-1.8+git20200618/build-aux/config.sub-495- ;;
##############################################
mig-1.8+git20200618/build-aux/config.sub-538- blackfin-*)
mig-1.8+git20200618/build-aux/config.sub:539: basic_machine=bfin-`echo "$basic_machine" | sed 's/^[^-]*-//'`
mig-1.8+git20200618/build-aux/config.sub-540- os=-linux
##############################################
mig-1.8+git20200618/build-aux/config.sub-546- c54x-*)
mig-1.8+git20200618/build-aux/config.sub:547: basic_machine=tic54x-`echo "$basic_machine" | sed 's/^[^-]*-//'`
mig-1.8+git20200618/build-aux/config.sub-548- ;;
mig-1.8+git20200618/build-aux/config.sub-549- c55x-*)
mig-1.8+git20200618/build-aux/config.sub:550: basic_machine=tic55x-`echo "$basic_machine" | sed 's/^[^-]*-//'`
mig-1.8+git20200618/build-aux/config.sub-551- ;;
mig-1.8+git20200618/build-aux/config.sub-552- c6x-*)
mig-1.8+git20200618/build-aux/config.sub:553: basic_machine=tic6x-`echo "$basic_machine" | sed 's/^[^-]*-//'`
mig-1.8+git20200618/build-aux/config.sub-554- ;;
##############################################
mig-1.8+git20200618/build-aux/config.sub-650- e500v[12]-*)
mig-1.8+git20200618/build-aux/config.sub:651: basic_machine=powerpc-`echo "$basic_machine" | sed 's/^[^-]*-//'`
mig-1.8+git20200618/build-aux/config.sub-652- os=$os"spe"
##############################################
mig-1.8+git20200618/build-aux/config.sub-754- i*86v32)
mig-1.8+git20200618/build-aux/config.sub:755: basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'`
mig-1.8+git20200618/build-aux/config.sub-756- os=-sysv32
##############################################
mig-1.8+git20200618/build-aux/config.sub-758- i*86v4*)
mig-1.8+git20200618/build-aux/config.sub:759: basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'`
mig-1.8+git20200618/build-aux/config.sub-760- os=-sysv4
##############################################
mig-1.8+git20200618/build-aux/config.sub-762- i*86v)
mig-1.8+git20200618/build-aux/config.sub:763: basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'`
mig-1.8+git20200618/build-aux/config.sub-764- os=-sysv
##############################################
mig-1.8+git20200618/build-aux/config.sub-766- i*86sol2)
mig-1.8+git20200618/build-aux/config.sub:767: basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'`
mig-1.8+git20200618/build-aux/config.sub-768- os=-solaris2
##############################################
mig-1.8+git20200618/build-aux/config.sub-792- leon-*|leon[3-9]-*)
mig-1.8+git20200618/build-aux/config.sub:793: basic_machine=sparc-`echo "$basic_machine" | sed 's/-.*//'`
mig-1.8+git20200618/build-aux/config.sub-794- ;;
##############################################
mig-1.8+git20200618/build-aux/config.sub-799- m68knommu-*)
mig-1.8+git20200618/build-aux/config.sub:800: basic_machine=m68k-`echo "$basic_machine" | sed 's/^[^-]*-//'`
mig-1.8+git20200618/build-aux/config.sub-801- os=-linux
##############################################
mig-1.8+git20200618/build-aux/config.sub-833- mips3*-*)
mig-1.8+git20200618/build-aux/config.sub:834: basic_machine=`echo "$basic_machine" | sed -e 's/mips3/mips64/'`
mig-1.8+git20200618/build-aux/config.sub-835- ;;
mig-1.8+git20200618/build-aux/config.sub-836- mips3*)
mig-1.8+git20200618/build-aux/config.sub:837: basic_machine=`echo "$basic_machine" | sed -e 's/mips3/mips64/'`-unknown
mig-1.8+git20200618/build-aux/config.sub-838- ;;
##############################################
mig-1.8+git20200618/build-aux/config.sub-855- ms1-*)
mig-1.8+git20200618/build-aux/config.sub:856: basic_machine=`echo "$basic_machine" | sed -e 's/ms1-/mt-/'`
mig-1.8+git20200618/build-aux/config.sub-857- ;;
##############################################
mig-1.8+git20200618/build-aux/config.sub-980- parisc-*)
mig-1.8+git20200618/build-aux/config.sub:981: basic_machine=hppa-`echo "$basic_machine" | sed 's/^[^-]*-//'`
mig-1.8+git20200618/build-aux/config.sub-982- os=-linux
##############################################
mig-1.8+git20200618/build-aux/config.sub-996- pc98-*)
mig-1.8+git20200618/build-aux/config.sub:997: basic_machine=i386-`echo "$basic_machine" | sed 's/^[^-]*-//'`
mig-1.8+git20200618/build-aux/config.sub-998- ;;
##############################################
mig-1.8+git20200618/build-aux/config.sub-1011- pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
mig-1.8+git20200618/build-aux/config.sub:1012: basic_machine=i586-`echo "$basic_machine" | sed 's/^[^-]*-//'`
mig-1.8+git20200618/build-aux/config.sub-1013- ;;
mig-1.8+git20200618/build-aux/config.sub-1014- pentiumpro-* | p6-* | 6x86-* | athlon-*)
mig-1.8+git20200618/build-aux/config.sub:1015: basic_machine=i686-`echo "$basic_machine" | sed 's/^[^-]*-//'`
mig-1.8+git20200618/build-aux/config.sub-1016- ;;
mig-1.8+git20200618/build-aux/config.sub-1017- pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
mig-1.8+git20200618/build-aux/config.sub:1018: basic_machine=i686-`echo "$basic_machine" | sed 's/^[^-]*-//'`
mig-1.8+git20200618/build-aux/config.sub-1019- ;;
mig-1.8+git20200618/build-aux/config.sub-1020- pentium4-*)
mig-1.8+git20200618/build-aux/config.sub:1021: basic_machine=i786-`echo "$basic_machine" | sed 's/^[^-]*-//'`
mig-1.8+git20200618/build-aux/config.sub-1022- ;;
##############################################
mig-1.8+git20200618/build-aux/config.sub-1030- ppc-* | ppcbe-*)
mig-1.8+git20200618/build-aux/config.sub:1031: basic_machine=powerpc-`echo "$basic_machine" | sed 's/^[^-]*-//'`
mig-1.8+git20200618/build-aux/config.sub-1032- ;;
##############################################
mig-1.8+git20200618/build-aux/config.sub-1036- ppcle-* | powerpclittle-*)
mig-1.8+git20200618/build-aux/config.sub:1037: basic_machine=powerpcle-`echo "$basic_machine" | sed 's/^[^-]*-//'`
mig-1.8+git20200618/build-aux/config.sub-1038- ;;
##############################################
mig-1.8+git20200618/build-aux/config.sub-1040- ;;
mig-1.8+git20200618/build-aux/config.sub:1041: ppc64-*) basic_machine=powerpc64-`echo "$basic_machine" | sed 's/^[^-]*-//'`
mig-1.8+git20200618/build-aux/config.sub-1042- ;;
##############################################
mig-1.8+git20200618/build-aux/config.sub-1046- ppc64le-* | powerpc64little-*)
mig-1.8+git20200618/build-aux/config.sub:1047: basic_machine=powerpc64le-`echo "$basic_machine" | sed 's/^[^-]*-//'`
mig-1.8+git20200618/build-aux/config.sub-1048- ;;
##############################################
mig-1.8+git20200618/build-aux/config.sub-1122- strongarm-* | thumb-*)
mig-1.8+git20200618/build-aux/config.sub:1123: basic_machine=arm-`echo "$basic_machine" | sed 's/^[^-]*-//'`
mig-1.8+git20200618/build-aux/config.sub-1124- ;;
##############################################
mig-1.8+git20200618/build-aux/config.sub-1255- xscale-* | xscalee[bl]-*)
mig-1.8+git20200618/build-aux/config.sub:1256: basic_machine=`echo "$basic_machine" | sed 's/^xscale/arm/'`
mig-1.8+git20200618/build-aux/config.sub-1257- ;;
##############################################
mig-1.8+git20200618/build-aux/config.sub-1317- *)
mig-1.8+git20200618/build-aux/config.sub:1318: echo Invalid configuration \`"$1"\': machine \`"$basic_machine"\' not recognized 1>&2
mig-1.8+git20200618/build-aux/config.sub-1319- exit 1
##############################################
mig-1.8+git20200618/build-aux/config.sub-1325- *-digital*)
mig-1.8+git20200618/build-aux/config.sub:1326: basic_machine=`echo "$basic_machine" | sed 's/digital.*/dec/'`
mig-1.8+git20200618/build-aux/config.sub-1327- ;;
mig-1.8+git20200618/build-aux/config.sub-1328- *-commodore*)
mig-1.8+git20200618/build-aux/config.sub:1329: basic_machine=`echo "$basic_machine" | sed 's/commodore.*/cbm/'`
mig-1.8+git20200618/build-aux/config.sub-1330- ;;
##############################################
mig-1.8+git20200618/build-aux/config.sub-1346- -solaris1 | -solaris1.*)
mig-1.8+git20200618/build-aux/config.sub:1347: os=`echo $os | sed -e 's|solaris1|sunos4|'`
mig-1.8+git20200618/build-aux/config.sub-1348- ;;
##############################################
mig-1.8+git20200618/build-aux/config.sub-1355- -gnu/linux*)
mig-1.8+git20200618/build-aux/config.sub:1356: os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
mig-1.8+git20200618/build-aux/config.sub-1357- ;;
##############################################
mig-1.8+git20200618/build-aux/config.sub-1407- -nto*)
mig-1.8+git20200618/build-aux/config.sub:1408: os=`echo $os | sed -e 's|nto|nto-qnx|'`
mig-1.8+git20200618/build-aux/config.sub-1409- ;;
##############################################
mig-1.8+git20200618/build-aux/config.sub-1414- -mac*)
mig-1.8+git20200618/build-aux/config.sub:1415: os=`echo "$os" | sed -e 's|mac|macos|'`
mig-1.8+git20200618/build-aux/config.sub-1416- ;;
##############################################
mig-1.8+git20200618/build-aux/config.sub-1420- -linux*)
mig-1.8+git20200618/build-aux/config.sub:1421: os=`echo $os | sed -e 's|linux|linux-gnu|'`
mig-1.8+git20200618/build-aux/config.sub-1422- ;;
mig-1.8+git20200618/build-aux/config.sub-1423- -sunos5*)
mig-1.8+git20200618/build-aux/config.sub:1424: os=`echo "$os" | sed -e 's|sunos5|solaris2|'`
mig-1.8+git20200618/build-aux/config.sub-1425- ;;
mig-1.8+git20200618/build-aux/config.sub-1426- -sunos6*)
mig-1.8+git20200618/build-aux/config.sub:1427: os=`echo "$os" | sed -e 's|sunos6|solaris3|'`
mig-1.8+git20200618/build-aux/config.sub-1428- ;;
##############################################
mig-1.8+git20200618/build-aux/config.sub-1469- -sinix5.*)
mig-1.8+git20200618/build-aux/config.sub:1470: os=`echo $os | sed -e 's|sinix|sysv|'`
mig-1.8+git20200618/build-aux/config.sub-1471- ;;
##############################################
mig-1.8+git20200618/build-aux/config.sub-1528- # Get rid of the `-' at the beginning of $os.
mig-1.8+git20200618/build-aux/config.sub:1529: os=`echo $os | sed 's/[^-]*-//'`
mig-1.8+git20200618/build-aux/config.sub:1530: echo Invalid configuration \`"$1"\': system \`"$os"\' not recognized 1>&2
mig-1.8+git20200618/build-aux/config.sub-1531- exit 1
##############################################
mig-1.8+git20200618/build-aux/config.sub-1788- esac
mig-1.8+git20200618/build-aux/config.sub:1789: basic_machine=`echo "$basic_machine" | sed "s/unknown/$vendor/"`
mig-1.8+git20200618/build-aux/config.sub-1790- ;;
##############################################
mig-1.8+git20200618/aclocal.m4-92-# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
mig-1.8+git20200618/aclocal.m4:93:# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
mig-1.8+git20200618/aclocal.m4-94-# and then we would define $MISSING as
##############################################
mig-1.8+git20200618/aclocal.m4-107-# Expand $ac_aux_dir to an absolute path.
mig-1.8+git20200618/aclocal.m4:108:am_aux_dir=`cd "$ac_aux_dir" && pwd`
mig-1.8+git20200618/aclocal.m4-109-])
##############################################
mig-1.8+git20200618/aclocal.m4-205- if test "$am_compiler_list" = ""; then
mig-1.8+git20200618/aclocal.m4:206: am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
mig-1.8+git20200618/aclocal.m4-207- fi
##############################################
mig-1.8+git20200618/aclocal.m4-358- # Strip MF so we end up with the name of the file.
mig-1.8+git20200618/aclocal.m4:359: am_mf=`AS_ECHO(["$am_mf"]) | sed -e 's/:.*$//'`
mig-1.8+git20200618/aclocal.m4-360- # Check whether this is an Automake generated Makefile which includes
##############################################
mig-1.8+git20200618/aclocal.m4-365- || continue
mig-1.8+git20200618/aclocal.m4:366: am_dirpart=`AS_DIRNAME(["$am_mf"])`
mig-1.8+git20200618/aclocal.m4:367: am_filepart=`AS_BASENAME(["$am_mf"])`
mig-1.8+git20200618/aclocal.m4-368- AM_RUN_LOG([cd "$am_dirpart" \
##############################################
mig-1.8+git20200618/aclocal.m4-435-AC_REQUIRE([AC_PROG_INSTALL])dnl
mig-1.8+git20200618/aclocal.m4:436:if test "`cd $srcdir && pwd`" != "`pwd`"; then
mig-1.8+git20200618/aclocal.m4-437- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
##############################################
mig-1.8+git20200618/aclocal.m4-594- * )
mig-1.8+git20200618/aclocal.m4:595: _am_stamp_count=`expr $_am_stamp_count + 1` ;;
mig-1.8+git20200618/aclocal.m4-596- esac
mig-1.8+git20200618/aclocal.m4-597-done
mig-1.8+git20200618/aclocal.m4:598:echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
mig-1.8+git20200618/aclocal.m4-599-
##############################################
mig-1.8+git20200618/aclocal.m4-868- echo "timestamp, slept: $am_has_slept" > conftest.file
mig-1.8+git20200618/aclocal.m4:869: set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
mig-1.8+git20200618/aclocal.m4-870- if test "$[*]" = "X"; then
mig-1.8+git20200618/aclocal.m4-871- # -L didn't work.
mig-1.8+git20200618/aclocal.m4:872: set X `ls -t "$srcdir/configure" conftest.file`
mig-1.8+git20200618/aclocal.m4-873- fi
##############################################
mig-1.8+git20200618/gensym.awk-36-/^expr/ {
mig-1.8+git20200618/gensym.awk:37: print "__asm (\"\\n\\";
mig-1.8+git20200618/gensym.awk-38- if ($3 == "")
##############################################
mig-1.8+git20200618/gensym.awk-45-/^size/ {
mig-1.8+git20200618/gensym.awk:46: print "__asm (\"\\n\\";
mig-1.8+git20200618/gensym.awk-47- if ($4 == "")
##############################################
mig-1.8+git20200618/gensym.awk-56-/^offset/ {
mig-1.8+git20200618/gensym.awk:57: print "__asm (\"\\n\\";
mig-1.8+git20200618/gensym.awk-58- if ($5 == "")