===========================================================
.___ __ __
_________________ __ __ __| _/|__|/ |_
/ ___\_` __ \__ \ | | \/ __ | | \\_ __\
/ /_/ > | \// __ \| | / /_/ | | || |
\___ /|__| (____ /____/\____ | |__||__|
/_____/ \/ \/
grep rough audit - static analysis tool
v2.8 written by @Wireghoul
=================================[justanotherhacker.com]===
pcp-5.2.2/GNUmakefile-48-default_pcp : $(CONFIGURE_GENERATED)
pcp-5.2.2/GNUmakefile:49: +for d in `echo $(SUBDIRS)`; do \
pcp-5.2.2/GNUmakefile-50- if test -d "$$d" ; then \
##############################################
pcp-5.2.2/GNUmakefile-113- #
pcp-5.2.2/GNUmakefile:114: @for d in `echo $(SUBDIRS)`; do \
pcp-5.2.2/GNUmakefile-115- if test -d "$$d" ; then \
##############################################
pcp-5.2.2/INSTALL.md-222-$ cd pcp-<version>/build/rpm
pcp-5.2.2/INSTALL.md:223:$ sudo rpm -U `echo *.rpm | sed -e '/\.src\.rpm$/d'`
pcp-5.2.2/INSTALL.md-224-```
##############################################
pcp-5.2.2/Makepkgs-71- do
pcp-5.2.2/Makepkgs:72: exec=`which $command 2>/dev/null`
pcp-5.2.2/Makepkgs-73- if [ -n "$exec" ]
##############################################
pcp-5.2.2/Makepkgs-107- #
pcp-5.2.2/Makepkgs:108: command=`which $envvar 2>/dev/null`
pcp-5.2.2/Makepkgs-109- if [ -z "$command" ]
##############################################
pcp-5.2.2/Makepkgs-118-
pcp-5.2.2/Makepkgs:119:export MAKE=`gnu_tool Error "$MAKE" make gmake`
pcp-5.2.2/Makepkgs:120:export TAR=`gnu_tool Warning "$TAR" tar gtar gnutar`
pcp-5.2.2/Makepkgs:121:export ZIP=`gnu_tool Error "$ZIP" gzip gnuzip`
pcp-5.2.2/Makepkgs-122-
##############################################
pcp-5.2.2/Makepkgs-439- eval `grep DISTRIB_RELEASE= /etc/lsb-release`
pcp-5.2.2/Makepkgs:440: XDISTRIB_RELEASE=`echo $DISTRIB_RELEASE | sed -e 's/[^0-9]//g'`
pcp-5.2.2/Makepkgs-441- [ -z "$XDISTRIB_RELEASE" ] && XDISTRIB_RELEASE=0000
##############################################
pcp-5.2.2/Makepkgs-451- DISTRIB_RELEASE=`cat /etc/debian_version`
pcp-5.2.2/Makepkgs:452: XDISTRIB_RELEASE=`echo $DISTRIB_RELEASE | sed -e 's/[^0-9]//g'`
pcp-5.2.2/Makepkgs-453- [ -z "$XDISTRIB_RELEASE" ] && XDISTRIB_RELEASE=0000
##############################################
pcp-5.2.2/aclocal.m4-123- PKG_CHECK_EXISTS([$3],
pcp-5.2.2/aclocal.m4:124: [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`
pcp-5.2.2/aclocal.m4-125- test "x$?" != "x0" && pkg_failed=yes ],
##############################################
pcp-5.2.2/aclocal.m4-171- if test $_pkg_short_errors_supported = yes; then
pcp-5.2.2/aclocal.m4:172: $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1`
pcp-5.2.2/aclocal.m4-173- else
pcp-5.2.2/aclocal.m4:174: $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1`
pcp-5.2.2/aclocal.m4-175- fi
##############################################
pcp-5.2.2/build/cleanconfigs-50- #
pcp-5.2.2/build/cleanconfigs:51: _try=`find "$_dir/$_file" -newer "$_new/$_file" -print`
pcp-5.2.2/build/cleanconfigs-52- [ -n "$_try" ] && _want=true
##############################################
pcp-5.2.2/build/cleanconfigs-57- then
pcp-5.2.2/build/cleanconfigs:58: _dest=`dirname $_new/$_file`
pcp-5.2.2/build/cleanconfigs-59- if [ ! -d "$_dest" ]
##############################################
pcp-5.2.2/build/mac/GNUmakefile-47- @echo "# IDB for PCP" >> idb
pcp-5.2.2/build/mac/GNUmakefile:48: @WA=`cd $(TOPDIR) ; pwd` ; \
pcp-5.2.2/build/mac/GNUmakefile-49- $(PCP_AWK_PROG) ' \
##############################################
pcp-5.2.2/build/mac/GNUmakefile-69- | sed -e 's# '$$WA'/# #g' -e 's# /# #g' >> idb
pcp-5.2.2/build/mac/GNUmakefile:70: @(bdir=`echo $(PCP_BINADM_DIR) | cut -c2-`; \
pcp-5.2.2/build/mac/GNUmakefile-71- echo "f 644 root wheel $$bdir/idb idb replace"; \
##############################################
pcp-5.2.2/build/mac/build-installer-34-
pcp-5.2.2/build/mac/build-installer:35:prog=`basename $0`
pcp-5.2.2/build/mac/build-installer-36-tmp=`mktemp -d /tmp/pcp.XXXXXXXXX` || exit 1
##############################################
pcp-5.2.2/build/mac/build-installer-80-for f in installer-info installer-description; do
pcp-5.2.2/build/mac/build-installer:81: nf=`echo $f | cut -c11-`
pcp-5.2.2/build/mac/build-installer-82- sed -e"s/@package_version@/$PACKAGE_VERSION/g" \
##############################################
pcp-5.2.2/build/mac/cmdline-install-9-
pcp-5.2.2/build/mac/cmdline-install:10:disk_image=`echo pcp-*.dmg | sed -e 's/$/ /' -e 's/[^ ]*\.tmp\.dmg / /' -e 's/ $//'`
pcp-5.2.2/build/mac/cmdline-install-11-if [ "$disk_image" = "pcp-*.dmg" ]
##############################################
pcp-5.2.2/build/mac/cmdline-install-16-
pcp-5.2.2/build/mac/cmdline-install:17:n=`echo "$disk_image" | wc -w | sed -e 's/ //'`
pcp-5.2.2/build/mac/cmdline-install-18-if [ "$n" -gt 1 ]
##############################################
pcp-5.2.2/build/mac/cmdline-install-23-
pcp-5.2.2/build/mac/cmdline-install:24:base=`echo $disk_image | sed -e 's/\.dmg$//'`
pcp-5.2.2/build/mac/cmdline-install-25-if hdiutil attach $disk_image >$tmp/out 2>&1
##############################################
pcp-5.2.2/build/mac/install-pcp-72-tmp=`mktemp -d /tmp/pcp.XXXXXXXXX` || exit 1
pcp-5.2.2/build/mac/install-pcp:73:prog=`basename $0`
pcp-5.2.2/build/mac/install-pcp-74-status=1
##############################################
pcp-5.2.2/build/mac/install-pcp-98-
pcp-5.2.2/build/mac/install-pcp:99:OS_VERSION=`$UNAME -r`
pcp-5.2.2/build/mac/install-pcp-100-
##############################################
pcp-5.2.2/build/mac/install-pcp-205- # max and min without exact match, so test range
pcp-5.2.2/build/mac/install-pcp:206: _min_numeric=`_get_numeric_version $_min_version`
pcp-5.2.2/build/mac/install-pcp:207: _max_numeric=`_get_numeric_version $_max_version`
pcp-5.2.2/build/mac/install-pcp:208: _os_numeric=`_get_numeric_version $OS_VERSION`
pcp-5.2.2/build/mac/install-pcp-209- if [ $_min_numeric -gt $_max_numeric ]; then
##############################################
pcp-5.2.2/build/mac/install-pcp-260- file=$root/$1
pcp-5.2.2/build/mac/install-pcp:261: dir=`$DIRNAME $2`
pcp-5.2.2/build/mac/install-pcp-262-
##############################################
pcp-5.2.2/build/mac/install-pcp-341- echo "cwd=`pwd`" >$tmp/debug
pcp-5.2.2/build/mac/install-pcp:342: echo "source dir=`dirname $source`" >>$tmp/debug
pcp-5.2.2/build/mac/install-pcp:343: ls -l `dirname $source` >>$tmp/debug
pcp-5.2.2/build/mac/install-pcp-344- _debug <$tmp/debug
##############################################
pcp-5.2.2/build/mac/install-pcp-563-parse=false
pcp-5.2.2/build/mac/install-pcp:564:if set -- `getopt cC:il:nprR:u:vy: $*`
pcp-5.2.2/build/mac/install-pcp-565-then
##############################################
pcp-5.2.2/build/mac/installer-resources/postinstall-17-
pcp-5.2.2/build/mac/installer-resources/postinstall:18:prog=`basename $0`
pcp-5.2.2/build/mac/installer-resources/postinstall-19-status=1
##############################################
pcp-5.2.2/build/mac/installer-resources/postupgrade-17-
pcp-5.2.2/build/mac/installer-resources/postupgrade:18:prog=`basename $0`
pcp-5.2.2/build/mac/installer-resources/postupgrade-19-status=1
##############################################
pcp-5.2.2/build/mac/uninstall-pcp.in-38-
pcp-5.2.2/build/mac/uninstall-pcp.in:39:if [ "$here" = "$BINADM_DIR" -o "$here" = `dirname $BINADM_DIR` ]
pcp-5.2.2/build/mac/uninstall-pcp.in-40-then
##############################################
pcp-5.2.2/build/rpm/GNUmakefile-37- echo "Signing packages with key: $$RPM_SIGN_KEYID"; \
pcp-5.2.2/build/rpm/GNUmakefile:38: RPMDIR=`sed -n -e "s,'$$,/,g" -e 's/.*_rpmdir *//p' < rpmmacros`; \
pcp-5.2.2/build/rpm/GNUmakefile-39- RPMS=`rpmspec -q --rpms $(SPEC) | \
##############################################
pcp-5.2.2/build/rpm/GNUmakefile-45-rpmmacros : macros.template
pcp-5.2.2/build/rpm/GNUmakefile:46: @TREEROOT=`cd ${TOPDIR}; pwd`; \
pcp-5.2.2/build/rpm/GNUmakefile-47- for d in RPM SRPM; do \
##############################################
pcp-5.2.2/build/rpm/cherrypick-28- touch $tmp.ok
pcp-5.2.2/build/rpm/cherrypick:29: me=`echo $rpm | sed -e 's/-[0-9].*//'`
pcp-5.2.2/build/rpm/cherrypick-30- if rpm -qR -p $rpm >$tmp.req
##############################################
pcp-5.2.2/build/rpm/filter-requires-38-done
pcp-5.2.2/build/rpm/filter-requires:39:shift `expr $OPTIND - 1`
pcp-5.2.2/build/rpm/filter-requires-40-
##############################################
pcp-5.2.2/build/rpm/get_rpm_version-43-
pcp-5.2.2/build/rpm/get_rpm_version:44:if `which $rpm >/dev/null 2>&1`
pcp-5.2.2/build/rpm/get_rpm_version-45-then
##############################################
pcp-5.2.2/build/rpm/pcp.spec.in-2101-# fix up build version
pcp-5.2.2/build/rpm/pcp.spec.in:2102:_build=`echo %{release} | sed -e 's/\..*$//'`
pcp-5.2.2/build/rpm/pcp.spec.in-2103-sed -i "/PACKAGE_BUILD/s/=[0-9]*/=$_build/" VERSION.pcp
##############################################
pcp-5.2.2/build/rpm/pcp.spec.in-2130-. $BACKDIR/src/include/pcp.env
pcp-5.2.2/build/rpm/pcp.spec.in:2131:CFGFILELIST=`ls -1 $BACKDIR/debian/pcp-conf.{install,dirs}`
pcp-5.2.2/build/rpm/pcp.spec.in:2132:LIBFILELIST=`ls -1 $BACKDIR/debian/lib*.{install,dirs} | fgrep -v -- -dev.`
pcp-5.2.2/build/rpm/pcp.spec.in:2133:DEVFILELIST=`ls -1 $BACKDIR/debian/lib*-dev.{install,dirs}`
pcp-5.2.2/build/rpm/pcp.spec.in-2134-
##############################################
pcp-5.2.2/build/rpm/redhat.spec-2219-# fix up build version
pcp-5.2.2/build/rpm/redhat.spec:2220:_build=`echo %{release} | sed -e 's/\..*$//'`
pcp-5.2.2/build/rpm/redhat.spec-2221-sed -i "/PACKAGE_BUILD/s/=[0-9]*/=$_build/" VERSION.pcp
##############################################
pcp-5.2.2/build/rpm/redhat.spec-2278-rm -f $RPM_BUILD_ROOT/%{_datadir}/applications/pmchart.desktop
pcp-5.2.2/build/rpm/redhat.spec:2279:rm -f `find $RPM_BUILD_ROOT/%{_mandir}/man1 | grep -E "$PCP_GUI"`
pcp-5.2.2/build/rpm/redhat.spec-2280-%else
##############################################
pcp-5.2.2/build/sun/GNUmakefile-57-ifneq "$(GIT)" ""
pcp-5.2.2/build/sun/GNUmakefile:58: @echo "PSTAMP="`$(GIT) log -n1 --pretty=format:%H` >> $@
pcp-5.2.2/build/sun/GNUmakefile-59-endif
##############################################
pcp-5.2.2/build/tar/checkdirs-68- then
pcp-5.2.2/build/tar/checkdirs:69: dir=`echo "$dir" | sed -e 's/.*+//' -e 's/\`//g'`
pcp-5.2.2/build/tar/checkdirs:70: dir=`dirname $dir | sed -e 's;^/;;'`
pcp-5.2.2/build/tar/checkdirs-71- elif echo "$dir" | grep '/pcp/\.\./' >/dev/null
pcp-5.2.2/build/tar/checkdirs-72- then
pcp-5.2.2/build/tar/checkdirs:73: dir=`echo "$dir" | sed -e 's;/pcp/../;/;'`
pcp-5.2.2/build/tar/checkdirs-74- fi
##############################################
pcp-5.2.2/build/tar/listfiles-60-then
pcp-5.2.2/build/tar/listfiles:61: echo >&2 "listfiles: `wc -l <$tmp.main` files from the main manifest"
pcp-5.2.2/build/tar/listfiles:62: echo >&2 "listfiles: `wc -l <$tmp.perl` Perl files"
pcp-5.2.2/build/tar/listfiles:63: echo >&2 "listfiles: `wc -l <$tmp.python` Python files"
pcp-5.2.2/build/tar/listfiles-64-fi
##############################################
pcp-5.2.2/build/tar/preinstall.tail-34- #
pcp-5.2.2/build/tar/preinstall.tail:35: pids=`_get_pids_by_name -a $svc`
pcp-5.2.2/build/tar/preinstall.tail-36- [ -n "$pids" ] && kill -TERM $pids
##############################################
pcp-5.2.2/build/tar/remove-75-{
pcp-5.2.2/build/tar/remove:76: if [ "`echo $1/*`" = "$1/*" ]
pcp-5.2.2/build/tar/remove-77- then
##############################################
pcp-5.2.2/build/tar/useradd.darwin-68-done
pcp-5.2.2/build/tar/useradd.darwin:69:shift `expr $OPTIND - 1`
pcp-5.2.2/build/tar/useradd.darwin-70-[ $# -eq 1 ] || _usage
##############################################
pcp-5.2.2/build/tar/useradd.darwin-83- cat $tmp.tmp
pcp-5.2.2/build/tar/useradd.darwin:84: gid=`awk '{print $2}' <$tmp.tmp`
pcp-5.2.2/build/tar/useradd.darwin-85- $showme && echo "group $group ($gid): already exists, do nothing"
##############################################
pcp-5.2.2/build/tar/useradd.darwin-97- fi
pcp-5.2.2/build/tar/useradd.darwin:98: gid=`expr $gid + 1`
pcp-5.2.2/build/tar/useradd.darwin-99- _dscl . -create /Groups/$group
##############################################
pcp-5.2.2/build/tar/useradd.darwin-114-fi
pcp-5.2.2/build/tar/useradd.darwin:115:uid=`expr $uid + 1`
pcp-5.2.2/build/tar/useradd.darwin-116-_dscl . -create /Users/$user
##############################################
pcp-5.2.2/config.guess-34-
pcp-5.2.2/config.guess:35:me=`echo "$0" | sed -e 's,.*/,,'`
pcp-5.2.2/config.guess-36-
##############################################
pcp-5.2.2/config.guess-102-: ${TMPDIR=/tmp} ;
pcp-5.2.2/config.guess:103: { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
pcp-5.2.2/config.guess-104- { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
##############################################
pcp-5.2.2/config.guess-151- EOF
pcp-5.2.2/config.guess:152: eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC' | sed 's, ,,g'`
pcp-5.2.2/config.guess-153- ;;
##############################################
pcp-5.2.2/config.guess-181- earmv*)
pcp-5.2.2/config.guess:182: arch=`echo ${UNAME_MACHINE_ARCH} | sed -e 's,^e\(armv[0-9]\).*$,\1,'`
pcp-5.2.2/config.guess:183: endian=`echo ${UNAME_MACHINE_ARCH} | sed -ne 's,^.*\(eb\)$,\1,p'`
pcp-5.2.2/config.guess-184- machine=${arch}${endian}-unknown
##############################################
pcp-5.2.2/config.guess-210- expr='s/^earmv[0-9]/-eabi/;s/eb$//'
pcp-5.2.2/config.guess:211: abi=`echo ${UNAME_MACHINE_ARCH} | sed -e "$expr"`
pcp-5.2.2/config.guess-212- ;;
##############################################
pcp-5.2.2/config.guess-223- *)
pcp-5.2.2/config.guess:224: release=`echo ${UNAME_RELEASE} | sed -e 's/[-_].*//' | cut -d. -f1,2`
pcp-5.2.2/config.guess-225- ;;
##############################################
pcp-5.2.2/config.guess-261- *4.0)
pcp-5.2.2/config.guess:262: UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
pcp-5.2.2/config.guess-263- ;;
pcp-5.2.2/config.guess-264- *5.*)
pcp-5.2.2/config.guess:265: UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
pcp-5.2.2/config.guess-266- ;;
##############################################
pcp-5.2.2/config.guess-271- # types through head -n 1, so we only detect the type of CPU 0.
pcp-5.2.2/config.guess:272: ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
pcp-5.2.2/config.guess-273- case "$ALPHA_CPU_TYPE" in
##############################################
pcp-5.2.2/config.guess-309- # 1.2 uses "1.2" for uname -r.
pcp-5.2.2/config.guess:310: echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`
pcp-5.2.2/config.guess-311- # Reset EXIT trap before exiting to avoid spurious non-zero exit code.
##############################################
pcp-5.2.2/config.guess-369- s390x:SunOS:*:*)
pcp-5.2.2/config.guess:370: echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
pcp-5.2.2/config.guess-371- exit ;;
pcp-5.2.2/config.guess-372- sun4H:SunOS:5.*:*)
pcp-5.2.2/config.guess:373: echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
pcp-5.2.2/config.guess-374- exit ;;
pcp-5.2.2/config.guess-375- sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
pcp-5.2.2/config.guess:376: echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
pcp-5.2.2/config.guess-377- exit ;;
##############################################
pcp-5.2.2/config.guess-394- fi
pcp-5.2.2/config.guess:395: echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
pcp-5.2.2/config.guess-396- exit ;;
##############################################
pcp-5.2.2/config.guess-400- # it's likely to be more like Solaris than SunOS4.
pcp-5.2.2/config.guess:401: echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
pcp-5.2.2/config.guess-402- exit ;;
##############################################
pcp-5.2.2/config.guess-409- # Japanese Language versions have a version number like `4.1.3-JL'.
pcp-5.2.2/config.guess:410: echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
pcp-5.2.2/config.guess-411- exit ;;
##############################################
pcp-5.2.2/config.guess-415- sun*:*:4.2BSD:*)
pcp-5.2.2/config.guess:416: UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
pcp-5.2.2/config.guess-417- test "x${UNAME_RELEASE}" = x && UNAME_RELEASE=3
##############################################
pcp-5.2.2/config.guess-497- $CC_FOR_BUILD -o $dummy $dummy.c &&
pcp-5.2.2/config.guess:498: dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
pcp-5.2.2/config.guess:499: SYSTEM_NAME=`$dummy $dummyarg` &&
pcp-5.2.2/config.guess-500- { echo "$SYSTEM_NAME"; exit; }
##############################################
pcp-5.2.2/config.guess-553- *:IRIX*:*:*)
pcp-5.2.2/config.guess:554: echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
pcp-5.2.2/config.guess-555- exit ;;
##############################################
pcp-5.2.2/config.guess-583-EOF
pcp-5.2.2/config.guess:584: if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
pcp-5.2.2/config.guess-585- then
##############################################
pcp-5.2.2/config.guess-596- *:AIX:*:[4567])
pcp-5.2.2/config.guess:597: IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
pcp-5.2.2/config.guess-598- if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
##############################################
pcp-5.2.2/config.guess-632- 9000/[34678]??:HP-UX:*:*)
pcp-5.2.2/config.guess:633: HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
pcp-5.2.2/config.guess-634- case "${UNAME_MACHINE}" in
##############################################
pcp-5.2.2/config.guess-686-EOF
pcp-5.2.2/config.guess:687: (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
pcp-5.2.2/config.guess-688- test -z "$HP_ARCH" && HP_ARCH=hppa
##############################################
pcp-5.2.2/config.guess-714- ia64:HP-UX:*:*)
pcp-5.2.2/config.guess:715: HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
pcp-5.2.2/config.guess-716- echo ia64-hp-hpux${HPUX_REV}
##############################################
pcp-5.2.2/config.guess-744-EOF
pcp-5.2.2/config.guess:745: $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
pcp-5.2.2/config.guess-746- { echo "$SYSTEM_NAME"; exit; }
##############################################
pcp-5.2.2/config.guess-815- FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'`
pcp-5.2.2/config.guess:816: FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
pcp-5.2.2/config.guess-817- echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
##############################################
pcp-5.2.2/config.guess-820- FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'`
pcp-5.2.2/config.guess:821: FUJITSU_REL=`echo ${UNAME_RELEASE} | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/ /_/'`
pcp-5.2.2/config.guess-822- echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
##############################################
pcp-5.2.2/config.guess-836- amd64)
pcp-5.2.2/config.guess:837: echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
pcp-5.2.2/config.guess-838- *)
pcp-5.2.2/config.guess:839: echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
pcp-5.2.2/config.guess-840- esac
##############################################
pcp-5.2.2/config.guess-894- prep*:SunOS:5.*:*)
pcp-5.2.2/config.guess:895: echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
pcp-5.2.2/config.guess-896- exit ;;
##############################################
pcp-5.2.2/config.guess-898- # the GNU system
pcp-5.2.2/config.guess:899: echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-${LIBC}`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
pcp-5.2.2/config.guess-900- exit ;;
##############################################
pcp-5.2.2/config.guess-902- # other systems with GNU libc and userland
pcp-5.2.2/config.guess:903: echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-${LIBC}
pcp-5.2.2/config.guess-904- exit ;;
##############################################
pcp-5.2.2/config.guess-996-EOF
pcp-5.2.2/config.guess:997: eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
pcp-5.2.2/config.guess-998- test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; }
##############################################
pcp-5.2.2/config.guess-1090- i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
pcp-5.2.2/config.guess:1091: UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
pcp-5.2.2/config.guess-1092- if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
##############################################
pcp-5.2.2/config.guess-1290- fi
pcp-5.2.2/config.guess:1291: if test `echo "$UNAME_RELEASE" | sed -e 's/\..*//'` -le 10 ; then
pcp-5.2.2/config.guess-1292- if [ "$CC_FOR_BUILD" != no_compiler_found ]; then
##############################################
pcp-5.2.2/config.guess-1375- *:DragonFly:*:*)
pcp-5.2.2/config.guess:1376: echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
pcp-5.2.2/config.guess-1377- exit ;;
##############################################
pcp-5.2.2/config.guess-1388- i*86:skyos:*:*)
pcp-5.2.2/config.guess:1389: echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
pcp-5.2.2/config.guess-1390- exit ;;
##############################################
pcp-5.2.2/config.sub-52-
pcp-5.2.2/config.sub:53:me=`echo "$0" | sed -e 's,.*/,,'`
pcp-5.2.2/config.sub-54-
##############################################
pcp-5.2.2/config.sub-114-# Here we must recognize all the valid KERNEL-OS combinations.
pcp-5.2.2/config.sub:115:maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
pcp-5.2.2/config.sub-116-case $maybe_os in
##############################################
pcp-5.2.2/config.sub-122- os=-$maybe_os
pcp-5.2.2/config.sub:123: basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
pcp-5.2.2/config.sub-124- ;;
##############################################
pcp-5.2.2/config.sub-126- os=-linux-android
pcp-5.2.2/config.sub:127: basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown
pcp-5.2.2/config.sub-128- ;;
pcp-5.2.2/config.sub-129- *)
pcp-5.2.2/config.sub:130: basic_machine=`echo $1 | sed 's/-[^-]*$//'`
pcp-5.2.2/config.sub-131- if [ $basic_machine != $1 ]
pcp-5.2.2/config.sub:132: then os=`echo $1 | sed 's/.*-/-/'`
pcp-5.2.2/config.sub-133- else os=; fi
##############################################
pcp-5.2.2/config.sub-180- os=-sco5v6
pcp-5.2.2/config.sub:181: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
pcp-5.2.2/config.sub-182- ;;
##############################################
pcp-5.2.2/config.sub-184- os=-sco3.2v5
pcp-5.2.2/config.sub:185: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
pcp-5.2.2/config.sub-186- ;;
##############################################
pcp-5.2.2/config.sub-188- os=-sco3.2v4
pcp-5.2.2/config.sub:189: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
pcp-5.2.2/config.sub-190- ;;
pcp-5.2.2/config.sub-191- -sco3.2.[4-9]*)
pcp-5.2.2/config.sub:192: os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
pcp-5.2.2/config.sub:193: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
pcp-5.2.2/config.sub-194- ;;
##############################################
pcp-5.2.2/config.sub-196- # Don't forget version if it is 3.2v4 or newer.
pcp-5.2.2/config.sub:197: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
pcp-5.2.2/config.sub-198- ;;
##############################################
pcp-5.2.2/config.sub-200- # Don't forget version if it is 3.2v4 or newer.
pcp-5.2.2/config.sub:201: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
pcp-5.2.2/config.sub-202- ;;
##############################################
pcp-5.2.2/config.sub-204- os=-sco3.2v2
pcp-5.2.2/config.sub:205: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
pcp-5.2.2/config.sub-206- ;;
pcp-5.2.2/config.sub-207- -udk*)
pcp-5.2.2/config.sub:208: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
pcp-5.2.2/config.sub-209- ;;
##############################################
pcp-5.2.2/config.sub-211- os=-isc2.2
pcp-5.2.2/config.sub:212: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
pcp-5.2.2/config.sub-213- ;;
##############################################
pcp-5.2.2/config.sub-217- -isc*)
pcp-5.2.2/config.sub:218: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
pcp-5.2.2/config.sub-219- ;;
##############################################
pcp-5.2.2/config.sub-229- -ptx*)
pcp-5.2.2/config.sub:230: basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
pcp-5.2.2/config.sub-231- ;;
pcp-5.2.2/config.sub-232- -windowsnt*)
pcp-5.2.2/config.sub:233: os=`echo $os | sed -e 's/windowsnt/winnt/'`
pcp-5.2.2/config.sub-234- ;;
##############################################
pcp-5.2.2/config.sub-366- *-*-*)
pcp-5.2.2/config.sub:367: echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
pcp-5.2.2/config.sub-368- exit 1
##############################################
pcp-5.2.2/config.sub-493- amd64-*)
pcp-5.2.2/config.sub:494: basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
pcp-5.2.2/config.sub-495- ;;
##############################################
pcp-5.2.2/config.sub-538- blackfin-*)
pcp-5.2.2/config.sub:539: basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
pcp-5.2.2/config.sub-540- os=-linux
##############################################
pcp-5.2.2/config.sub-546- c54x-*)
pcp-5.2.2/config.sub:547: basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'`
pcp-5.2.2/config.sub-548- ;;
pcp-5.2.2/config.sub-549- c55x-*)
pcp-5.2.2/config.sub:550: basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'`
pcp-5.2.2/config.sub-551- ;;
pcp-5.2.2/config.sub-552- c6x-*)
pcp-5.2.2/config.sub:553: basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'`
pcp-5.2.2/config.sub-554- ;;
##############################################
pcp-5.2.2/config.sub-749- i*86v32)
pcp-5.2.2/config.sub:750: basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
pcp-5.2.2/config.sub-751- os=-sysv32
##############################################
pcp-5.2.2/config.sub-753- i*86v4*)
pcp-5.2.2/config.sub:754: basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
pcp-5.2.2/config.sub-755- os=-sysv4
##############################################
pcp-5.2.2/config.sub-757- i*86v)
pcp-5.2.2/config.sub:758: basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
pcp-5.2.2/config.sub-759- os=-sysv
##############################################
pcp-5.2.2/config.sub-761- i*86sol2)
pcp-5.2.2/config.sub:762: basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
pcp-5.2.2/config.sub-763- os=-solaris2
##############################################
pcp-5.2.2/config.sub-787- leon-*|leon[3-9]-*)
pcp-5.2.2/config.sub:788: basic_machine=sparc-`echo $basic_machine | sed 's/-.*//'`
pcp-5.2.2/config.sub-789- ;;
##############################################
pcp-5.2.2/config.sub-794- m68knommu-*)
pcp-5.2.2/config.sub:795: basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
pcp-5.2.2/config.sub-796- os=-linux
##############################################
pcp-5.2.2/config.sub-831- mips3*-*)
pcp-5.2.2/config.sub:832: basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
pcp-5.2.2/config.sub-833- ;;
pcp-5.2.2/config.sub-834- mips3*)
pcp-5.2.2/config.sub:835: basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
pcp-5.2.2/config.sub-836- ;;
##############################################
pcp-5.2.2/config.sub-853- ms1-*)
pcp-5.2.2/config.sub:854: basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
pcp-5.2.2/config.sub-855- ;;
##############################################
pcp-5.2.2/config.sub-972- parisc-*)
pcp-5.2.2/config.sub:973: basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
pcp-5.2.2/config.sub-974- os=-linux
##############################################
pcp-5.2.2/config.sub-988- pc98-*)
pcp-5.2.2/config.sub:989: basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
pcp-5.2.2/config.sub-990- ;;
##############################################
pcp-5.2.2/config.sub-1003- pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
pcp-5.2.2/config.sub:1004: basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
pcp-5.2.2/config.sub-1005- ;;
pcp-5.2.2/config.sub-1006- pentiumpro-* | p6-* | 6x86-* | athlon-*)
pcp-5.2.2/config.sub:1007: basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
pcp-5.2.2/config.sub-1008- ;;
pcp-5.2.2/config.sub-1009- pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
pcp-5.2.2/config.sub:1010: basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
pcp-5.2.2/config.sub-1011- ;;
pcp-5.2.2/config.sub-1012- pentium4-*)
pcp-5.2.2/config.sub:1013: basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
pcp-5.2.2/config.sub-1014- ;;
##############################################
pcp-5.2.2/config.sub-1022- ppc-* | ppcbe-*)
pcp-5.2.2/config.sub:1023: basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
pcp-5.2.2/config.sub-1024- ;;
##############################################
pcp-5.2.2/config.sub-1028- ppcle-* | powerpclittle-*)
pcp-5.2.2/config.sub:1029: basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
pcp-5.2.2/config.sub-1030- ;;
##############################################
pcp-5.2.2/config.sub-1032- ;;
pcp-5.2.2/config.sub:1033: ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
pcp-5.2.2/config.sub-1034- ;;
##############################################
pcp-5.2.2/config.sub-1038- ppc64le-* | powerpc64little-*)
pcp-5.2.2/config.sub:1039: basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
pcp-5.2.2/config.sub-1040- ;;
##############################################
pcp-5.2.2/config.sub-1121- strongarm-* | thumb-*)
pcp-5.2.2/config.sub:1122: basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'`
pcp-5.2.2/config.sub-1123- ;;
##############################################
pcp-5.2.2/config.sub-1251- xscale-* | xscalee[bl]-*)
pcp-5.2.2/config.sub:1252: basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'`
pcp-5.2.2/config.sub-1253- ;;
##############################################
pcp-5.2.2/config.sub-1328- *)
pcp-5.2.2/config.sub:1329: echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
pcp-5.2.2/config.sub-1330- exit 1
##############################################
pcp-5.2.2/config.sub-1336- *-digital*)
pcp-5.2.2/config.sub:1337: basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
pcp-5.2.2/config.sub-1338- ;;
pcp-5.2.2/config.sub-1339- *-commodore*)
pcp-5.2.2/config.sub:1340: basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
pcp-5.2.2/config.sub-1341- ;;
##############################################
pcp-5.2.2/config.sub-1357- -solaris1 | -solaris1.*)
pcp-5.2.2/config.sub:1358: os=`echo $os | sed -e 's|solaris1|sunos4|'`
pcp-5.2.2/config.sub-1359- ;;
##############################################
pcp-5.2.2/config.sub-1369- -gnu/linux*)
pcp-5.2.2/config.sub:1370: os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
pcp-5.2.2/config.sub-1371- ;;
##############################################
pcp-5.2.2/config.sub-1416- -nto*)
pcp-5.2.2/config.sub:1417: os=`echo $os | sed -e 's|nto|nto-qnx|'`
pcp-5.2.2/config.sub-1418- ;;
##############################################
pcp-5.2.2/config.sub-1423- -mac*)
pcp-5.2.2/config.sub:1424: os=`echo $os | sed -e 's|mac|macos|'`
pcp-5.2.2/config.sub-1425- ;;
##############################################
pcp-5.2.2/config.sub-1429- -linux*)
pcp-5.2.2/config.sub:1430: os=`echo $os | sed -e 's|linux|linux-gnu|'`
pcp-5.2.2/config.sub-1431- ;;
pcp-5.2.2/config.sub-1432- -sunos5*)
pcp-5.2.2/config.sub:1433: os=`echo $os | sed -e 's|sunos5|solaris2|'`
pcp-5.2.2/config.sub-1434- ;;
pcp-5.2.2/config.sub-1435- -sunos6*)
pcp-5.2.2/config.sub:1436: os=`echo $os | sed -e 's|sunos6|solaris3|'`
pcp-5.2.2/config.sub-1437- ;;
##############################################
pcp-5.2.2/config.sub-1484- -sinix5.*)
pcp-5.2.2/config.sub:1485: os=`echo $os | sed -e 's|sinix|sysv|'`
pcp-5.2.2/config.sub-1486- ;;
##############################################
pcp-5.2.2/config.sub-1537- # Get rid of the `-' at the beginning of $os.
pcp-5.2.2/config.sub:1538: os=`echo $os | sed 's/[^-]*-//'`
pcp-5.2.2/config.sub:1539: echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
pcp-5.2.2/config.sub-1540- exit 1
##############################################
pcp-5.2.2/config.sub-1800- esac
pcp-5.2.2/config.sub:1801: basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
pcp-5.2.2/config.sub-1802- ;;
##############################################
pcp-5.2.2/configure-43-if test -z "$BASH_VERSION$ZSH_VERSION" \
pcp-5.2.2/configure:44: && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
pcp-5.2.2/configure-45- as_echo='print -r --'
pcp-5.2.2/configure-46- as_echo_n='print -rn --'
pcp-5.2.2/configure:47:elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
pcp-5.2.2/configure-48- as_echo='printf %s\n'
##############################################
pcp-5.2.2/configure-50-else
pcp-5.2.2/configure:51: if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
pcp-5.2.2/configure-52- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
##############################################
pcp-5.2.2/configure-60- expr "X$arg" : "X\\(.*\\)$as_nl";
pcp-5.2.2/configure:61: arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
pcp-5.2.2/configure-62- esac;
##############################################
pcp-5.2.2/configure-197- eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
pcp-5.2.2/configure:198: test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
pcp-5.2.2/configure-199-test \$(( 1 + 1 )) = 2 || exit 1"
##############################################
pcp-5.2.2/configure-324- case $as_dir in #(
pcp-5.2.2/configure:325: *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
pcp-5.2.2/configure-326- *) as_qdir=$as_dir;;
##############################################
pcp-5.2.2/configure-397- {
pcp-5.2.2/configure:398: as_val=`expr "$@" || test $? -eq 1`
pcp-5.2.2/configure-399- }
##############################################
pcp-5.2.2/configure-404-# ----------------------------------------
pcp-5.2.2/configure:405:# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
pcp-5.2.2/configure-406-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
##############################################
pcp-5.2.2/configure-467- eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
pcp-5.2.2/configure:468: test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
pcp-5.2.2/configure-469- # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
##############################################
pcp-5.2.2/configure-1153- case $ac_option in
pcp-5.2.2/configure:1154: *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
pcp-5.2.2/configure-1155- *=) ac_optarg= ;;
##############################################
pcp-5.2.2/configure-1197- -disable-* | --disable-*)
pcp-5.2.2/configure:1198: ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
pcp-5.2.2/configure-1199- # Reject names that are not valid shell variable names.
##############################################
pcp-5.2.2/configure-1202- ac_useropt_orig=$ac_useropt
pcp-5.2.2/configure:1203: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
pcp-5.2.2/configure-1204- case $ac_user_opts in
##############################################
pcp-5.2.2/configure-1223- -enable-* | --enable-*)
pcp-5.2.2/configure:1224: ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
pcp-5.2.2/configure-1225- # Reject names that are not valid shell variable names.
##############################################
pcp-5.2.2/configure-1228- ac_useropt_orig=$ac_useropt
pcp-5.2.2/configure:1229: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
pcp-5.2.2/configure-1230- case $ac_user_opts in
##############################################
pcp-5.2.2/configure-1436- -with-* | --with-*)
pcp-5.2.2/configure:1437: ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
pcp-5.2.2/configure-1438- # Reject names that are not valid shell variable names.
##############################################
pcp-5.2.2/configure-1441- ac_useropt_orig=$ac_useropt
pcp-5.2.2/configure:1442: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
pcp-5.2.2/configure-1443- case $ac_user_opts in
##############################################
pcp-5.2.2/configure-1452- -without-* | --without-*)
pcp-5.2.2/configure:1453: ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
pcp-5.2.2/configure-1454- # Reject names that are not valid shell variable names.
##############################################
pcp-5.2.2/configure-1457- ac_useropt_orig=$ac_useropt
pcp-5.2.2/configure:1458: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
pcp-5.2.2/configure-1459- case $ac_user_opts in
##############################################
pcp-5.2.2/configure-1490- *=*)
pcp-5.2.2/configure:1491: ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
pcp-5.2.2/configure-1492- # Reject names that are not valid shell variable names.
##############################################
pcp-5.2.2/configure-1511-if test -n "$ac_prev"; then
pcp-5.2.2/configure:1512: ac_option=--`echo $ac_prev | sed 's/_/-/g'`
pcp-5.2.2/configure-1513- as_fn_error $? "missing argument to $ac_option"
##############################################
pcp-5.2.2/configure-1533- */ )
pcp-5.2.2/configure:1534: ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
pcp-5.2.2/configure-1535- eval $ac_var=\$ac_val;;
##############################################
pcp-5.2.2/configure-1568-ac_ls_di=`ls -di .` &&
pcp-5.2.2/configure:1569:ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
pcp-5.2.2/configure-1570- as_fn_error $? "working directory cannot be determined"
##############################################
pcp-5.2.2/configure-1624-case $srcdir in
pcp-5.2.2/configure:1625:*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
pcp-5.2.2/configure-1626-esac
##############################################
pcp-5.2.2/configure-1667-By default, \`make install' will install all the files in
pcp-5.2.2/configure:1668:\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
pcp-5.2.2/configure:1669:an installation prefix other than \`$ac_default_prefix' using \`--prefix',
pcp-5.2.2/configure-1670-for instance \`--prefix=\$HOME'.
##############################################
pcp-5.2.2/configure-1862-*)
pcp-5.2.2/configure:1863: ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
pcp-5.2.2/configure-1864- # A ".." for each directory in $ac_dir_suffix.
pcp-5.2.2/configure:1865: ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
pcp-5.2.2/configure-1866- case $ac_top_builddir_sub in
##############################################
pcp-5.2.2/configure-2438- *\'*)
pcp-5.2.2/configure:2439: ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
pcp-5.2.2/configure-2440- esac
##############################################
pcp-5.2.2/configure-2521- case $ac_val in
pcp-5.2.2/configure:2522: *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
pcp-5.2.2/configure-2523- esac
##############################################
pcp-5.2.2/configure-2536- case $ac_val in
pcp-5.2.2/configure:2537: *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
pcp-5.2.2/configure-2538- esac
##############################################
pcp-5.2.2/configure-2656- set,)
pcp-5.2.2/configure:2657: { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
pcp-5.2.2/configure:2658:$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
pcp-5.2.2/configure-2659- ac_cache_corrupted=: ;;
##############################################
pcp-5.2.2/configure-2667- # differences in whitespace do not lead to failure.
pcp-5.2.2/configure:2668: ac_old_val_w=`echo x $ac_old_val`
pcp-5.2.2/configure:2669: ac_new_val_w=`echo x $ac_new_val`
pcp-5.2.2/configure-2670- if test "$ac_old_val_w" != "$ac_new_val_w"; then
##############################################
pcp-5.2.2/configure-2687- case $ac_new_val in
pcp-5.2.2/configure:2688: *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
pcp-5.2.2/configure-2689- *) ac_arg=$ac_var=$ac_new_val ;;
##############################################
pcp-5.2.2/configure-3037-test "x$ac_build_alias" = x &&
pcp-5.2.2/configure:3038: ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
pcp-5.2.2/configure-3039-test "x$ac_build_alias" = x &&
pcp-5.2.2/configure-3040- as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
pcp-5.2.2/configure:3041:ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
pcp-5.2.2/configure-3042- as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
##############################################
pcp-5.2.2/configure-3061-IFS=$ac_save_IFS
pcp-5.2.2/configure:3062:case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
pcp-5.2.2/configure-3063-
##############################################
pcp-5.2.2/configure-3072-else
pcp-5.2.2/configure:3073: ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
pcp-5.2.2/configure-3074- as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
##############################################
pcp-5.2.2/configure-3094-IFS=$ac_save_IFS
pcp-5.2.2/configure:3095:case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
pcp-5.2.2/configure-3096-
##############################################
pcp-5.2.2/configure-3105-else
pcp-5.2.2/configure:3106: ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` ||
pcp-5.2.2/configure-3107- as_fn_error $? "$SHELL $ac_aux_dir/config.sub $target_alias failed" "$LINENO" 5
##############################################
pcp-5.2.2/configure-3127-IFS=$ac_save_IFS
pcp-5.2.2/configure:3128:case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac
pcp-5.2.2/configure-3129-
##############################################
pcp-5.2.2/configure-3145-else
pcp-5.2.2/configure:3146: target=`echo $target | sed 's/^\([^-][^-]*-[^-][^-]*-[^-][^-]*\)-.*$/\1/'`
pcp-5.2.2/configure:3147: target_os=`echo $target_os | sed 's/solaris2\..*/solaris/'`
pcp-5.2.2/configure:3148: target_os=`echo $target_os | sed 's/^\([^-][^-]*\)-.*$/\1/' | sed 's/[\.0-9]*//g'`
pcp-5.2.2/configure-3149-
pcp-5.2.2/configure:3150: build=`echo $build | sed 's/^\([^-][^-]*-[^-][^-]*-[^-][^-]*\)-.*$/\1/'`
pcp-5.2.2/configure:3151: build_os=`echo $build_os | sed 's/solaris2\..*/solaris/'`
pcp-5.2.2/configure:3152: build_os=`echo $build_os | sed 's/^\([^-][^-]*\)-.*$/\1/'`
pcp-5.2.2/configure-3153-fi
##############################################
pcp-5.2.2/configure-3584-$as_echo_n "checking whether the C compiler works... " >&6; }
pcp-5.2.2/configure:3585:ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
pcp-5.2.2/configure-3586-
##############################################
pcp-5.2.2/configure-3628- then :; else
pcp-5.2.2/configure:3629: ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
pcp-5.2.2/configure-3630- fi
##############################################
pcp-5.2.2/configure-3688- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
pcp-5.2.2/configure:3689: *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
pcp-5.2.2/configure-3690- break;;
##############################################
pcp-5.2.2/configure-3797- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
pcp-5.2.2/configure:3798: *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
pcp-5.2.2/configure-3799- break;;
##############################################
pcp-5.2.2/configure-4940-/* end confdefs.h. */
pcp-5.2.2/configure:4941:`cat $LEX_OUTPUT_ROOT.c`
pcp-5.2.2/configure-4942-_ACEOF
##############################################
pcp-5.2.2/configure-4973- #define YYTEXT_POINTER 1
pcp-5.2.2/configure:4974:`cat $LEX_OUTPUT_ROOT.c`
pcp-5.2.2/configure-4975-_ACEOF
##############################################
pcp-5.2.2/configure-4993-fi
pcp-5.2.2/configure:4994:lex=`$echo $LEX | awk '{print $1}'`
pcp-5.2.2/configure:4995:lex=`$which "$lex"`
pcp-5.2.2/configure-4996-if test ! -x "$lex"; then
##############################################
pcp-5.2.2/configure-5044-
pcp-5.2.2/configure:5045:yacc=`$echo $YACC | awk '{print $1}'`
pcp-5.2.2/configure:5046:yacc=`$which "$yacc"`
pcp-5.2.2/configure-5047-if test ! -x "$yacc"; then
##############################################
pcp-5.2.2/configure-5111-else
pcp-5.2.2/configure:5112: sort=`$which sort`
pcp-5.2.2/configure-5113-fi
##############################################
pcp-5.2.2/configure-5166- # Check for GNU $ac_path_GREP
pcp-5.2.2/configure:5167:case `"$ac_path_GREP" --version 2>&1` in
pcp-5.2.2/configure-5168-*GNU*)
##############################################
pcp-5.2.2/configure-5232- # Check for GNU $ac_path_EGREP
pcp-5.2.2/configure:5233:case `"$ac_path_EGREP" --version 2>&1` in
pcp-5.2.2/configure-5234-*GNU*)
##############################################
pcp-5.2.2/configure-5585-do :
pcp-5.2.2/configure:5586: as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
pcp-5.2.2/configure-5587-ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
##############################################
pcp-5.2.2/configure-5590- cat >>confdefs.h <<_ACEOF
pcp-5.2.2/configure:5591:#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
pcp-5.2.2/configure-5592-_ACEOF
##############################################
pcp-5.2.2/configure-5682- test $ac_status = 0; }; then
pcp-5.2.2/configure:5683: pkg_cv_avahi_CFLAGS=`$PKG_CONFIG --cflags "avahi-client" 2>/dev/null`
pcp-5.2.2/configure-5684- test "x$?" != "x0" && pkg_failed=yes
##############################################
pcp-5.2.2/configure-5699- test $ac_status = 0; }; then
pcp-5.2.2/configure:5700: pkg_cv_avahi_LIBS=`$PKG_CONFIG --libs "avahi-client" 2>/dev/null`
pcp-5.2.2/configure-5701- test "x$?" != "x0" && pkg_failed=yes
##############################################
pcp-5.2.2/configure-5720- if test $_pkg_short_errors_supported = yes; then
pcp-5.2.2/configure:5721: avahi_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "avahi-client" 2>&1`
pcp-5.2.2/configure-5722- else
pcp-5.2.2/configure:5723: avahi_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "avahi-client" 2>&1`
pcp-5.2.2/configure-5724- fi
##############################################
pcp-5.2.2/configure-5852- test $ac_status = 0; }; then
pcp-5.2.2/configure:5853: pkg_cv_SYSTEMD_TMPFILESDIR=`$PKG_CONFIG --variable="tmpfilesdir" "systemd" 2>/dev/null`
pcp-5.2.2/configure-5854- test "x$?" != "x0" && pkg_failed=yes
##############################################
pcp-5.2.2/configure-5878- test $ac_status = 0; }; then
pcp-5.2.2/configure:5879: pkg_cv_SYSTEMD_SYSTEMUNITDIR=`$PKG_CONFIG --variable="systemdsystemunitdir" "systemd" 2>/dev/null`
pcp-5.2.2/configure-5880- test "x$?" != "x0" && pkg_failed=yes
##############################################
pcp-5.2.2/configure-5944- # use SOURCE_DATE_EPOCH for a deterministic builddate (reproducible builds)
pcp-5.2.2/configure:5945: PACKAGE_BUILD_DATE=`TZ=UTC date -d "@${SOURCE_DATE_EPOCH:-$(date +%s)}" +%Y-%m-%d 2>/dev/null`
pcp-5.2.2/configure-5946- test $? -eq 0 || PACKAGE_BUILD_DATE=`date +%Y-%m-%d`
##############################################
pcp-5.2.2/configure-5954-
pcp-5.2.2/configure:5955:pm_version_current=`awk </dev/null "BEGIN { print (${PACKAGE_MAJOR}*256+${PACKAGE_MINOR})*256+${PACKAGE_REVISION} }"`
pcp-5.2.2/configure-5956-
##############################################
pcp-5.2.2/configure-6059- ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
pcp-5.2.2/configure:6060: ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
pcp-5.2.2/configure-6061- # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
##############################################
pcp-5.2.2/configure-6126-if test -z "$BASH_VERSION$ZSH_VERSION" \
pcp-5.2.2/configure:6127: && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
pcp-5.2.2/configure-6128- as_echo='print -r --'
pcp-5.2.2/configure-6129- as_echo_n='print -rn --'
pcp-5.2.2/configure:6130:elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
pcp-5.2.2/configure-6131- as_echo='printf %s\n'
##############################################
pcp-5.2.2/configure-6133-else
pcp-5.2.2/configure:6134: if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
pcp-5.2.2/configure-6135- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
##############################################
pcp-5.2.2/configure-6143- expr "X$arg" : "X\\(.*\\)$as_nl";
pcp-5.2.2/configure:6144: arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
pcp-5.2.2/configure-6145- esac;
##############################################
pcp-5.2.2/configure-6220-# ----------------------------------------
pcp-5.2.2/configure:6221:# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
pcp-5.2.2/configure-6222-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
##############################################
pcp-5.2.2/configure-6292- {
pcp-5.2.2/configure:6293: as_val=`expr "$@" || test $? -eq 1`
pcp-5.2.2/configure-6294- }
##############################################
pcp-5.2.2/configure-6396- case $as_dir in #(
pcp-5.2.2/configure:6397: *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
pcp-5.2.2/configure-6398- *) as_qdir=$as_dir;;
##############################################
pcp-5.2.2/configure-6527-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
pcp-5.2.2/configure:6528:ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
pcp-5.2.2/configure-6529-ac_cs_version="\\
##############################################
pcp-5.2.2/configure-6549- --*=?*)
pcp-5.2.2/configure:6550: ac_option=`expr "X$1" : 'X\([^=]*\)='`
pcp-5.2.2/configure:6551: ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
pcp-5.2.2/configure-6552- ac_shift=:
##############################################
pcp-5.2.2/configure-6554- --*=)
pcp-5.2.2/configure:6555: ac_option=`expr "X$1" : 'X\([^=]*\)='`
pcp-5.2.2/configure-6556- ac_optarg=
##############################################
pcp-5.2.2/configure-6578- case $ac_optarg in
pcp-5.2.2/configure:6579: *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
pcp-5.2.2/configure-6580- '') as_fn_error $? "missing file argument" ;;
##############################################
pcp-5.2.2/configure-6586- case $ac_optarg in
pcp-5.2.2/configure:6587: *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
pcp-5.2.2/configure-6588- esac
##############################################
pcp-5.2.2/configure-6709-fi
pcp-5.2.2/configure:6710:ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
pcp-5.2.2/configure-6711-if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
##############################################
pcp-5.2.2/configure-6726- as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
pcp-5.2.2/configure:6727:ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
pcp-5.2.2/configure-6728-ac_delim='%!_!# '
##############################################
pcp-5.2.2/configure-6732-
pcp-5.2.2/configure:6733: ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
pcp-5.2.2/configure-6734- if test $ac_delim_n = $ac_delim_num; then
##############################################
pcp-5.2.2/configure-6870-for ac_last_try in false false :; do
pcp-5.2.2/configure:6871: ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
pcp-5.2.2/configure-6872- if test -z "$ac_tt"; then
##############################################
pcp-5.2.2/configure-7002- esac
pcp-5.2.2/configure:7003: case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
pcp-5.2.2/configure-7004- as_fn_append ac_file_inputs " '$ac_f'"
##############################################
pcp-5.2.2/configure-7061-*)
pcp-5.2.2/configure:7062: ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
pcp-5.2.2/configure-7063- # A ".." for each directory in $ac_dir_suffix.
pcp-5.2.2/configure:7064: ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
pcp-5.2.2/configure-7065- case $ac_top_builddir_sub in
##############################################
pcp-5.2.2/configure-7113-/@mandir@/p'
pcp-5.2.2/configure:7114:case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
pcp-5.2.2/configure-7115-*datarootdir*) ac_datarootdir_seen=yes;;
##############################################
pcp-5.2.2/configure-7130-
pcp-5.2.2/configure:7131:# Neutralize VPATH when `$srcdir' = `.'.
pcp-5.2.2/configure-7132-# Shell code in configure.ac might set extrasub.
##############################################
pcp-5.2.2/configure-7156-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
pcp-5.2.2/configure:7157: { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
pcp-5.2.2/configure-7158- { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \
##############################################
pcp-5.2.2/configure-7432- ubuntu)
pcp-5.2.2/configure:7433: VERSION_NO=`echo "$VERSION_ID" | sed 's/[^0-9]//'`
pcp-5.2.2/configure-7434- if test "$VERSION_NO" -ge 2004; then
##############################################
pcp-5.2.2/configure-7457-$as_echo_n "checking Python2 version... " >&6; }
pcp-5.2.2/configure:7458: eval `$PYTHON -V 2>&1 | awk '/^Python/ { ver=2; print $ver }' | awk -F. '{ major=1; minor=2; point=3; printf "export PY_MAJOR=%d PY_MINOR=%d PY_POINT=%d\n",$major,$minor,$point }'`
pcp-5.2.2/configure-7459- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PY_MAJOR.$PY_MINOR.$PY_POINT" >&5
##############################################
pcp-5.2.2/configure-7520-$as_echo_n "checking Python3 version... " >&6; }
pcp-5.2.2/configure:7521: eval `$PYTHON3 -V 2>&1 | awk '/^Python/ { ver=2; print $ver }' | awk -F. '{ major=1; minor=2; point=3; printf "export PY_MAJOR=%d PY_MINOR=%d PY_POINT=%d\n",$major,$minor,$point }'`
pcp-5.2.2/configure-7522- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PY_MAJOR.$PY_MINOR.$PY_POINT" >&5
##############################################
pcp-5.2.2/configure-8309- fi
pcp-5.2.2/configure:8310: eval `$qmake --version 2>&1 | awk '/Using Qt version/ { ver=4; print $ver }' | awk -F. '{ major=1; minor=2; point=3; printf "export QT_MAJOR=%d QT_MINOR=%d QT_POINT=%d\n",$major,$minor,$point }'`
pcp-5.2.2/configure-8311- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $QT_MAJOR.$QT_MINOR.$QT_POINT" >&5
##############################################
pcp-5.2.2/configure-9590-for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h; do
pcp-5.2.2/configure:9591: as_ac_Header=`$as_echo "ac_cv_header_dirent_$ac_hdr" | $as_tr_sh`
pcp-5.2.2/configure-9592-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_hdr that defines DIR" >&5
##############################################
pcp-5.2.2/configure-9622- cat >>confdefs.h <<_ACEOF
pcp-5.2.2/configure:9623:#define `$as_echo "HAVE_$ac_hdr" | $as_tr_cpp` 1
pcp-5.2.2/configure-9624-_ACEOF
##############################################
pcp-5.2.2/configure-9901-do :
pcp-5.2.2/configure:9902: as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
pcp-5.2.2/configure-9903-ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
##############################################
pcp-5.2.2/configure-9905- cat >>confdefs.h <<_ACEOF
pcp-5.2.2/configure:9906:#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
pcp-5.2.2/configure-9907-_ACEOF
##############################################
pcp-5.2.2/configure-9914-do :
pcp-5.2.2/configure:9915: as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
pcp-5.2.2/configure-9916-ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
##############################################
pcp-5.2.2/configure-9918- cat >>confdefs.h <<_ACEOF
pcp-5.2.2/configure:9919:#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
pcp-5.2.2/configure-9920-_ACEOF
##############################################
pcp-5.2.2/configure-9927-do :
pcp-5.2.2/configure:9928: as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
pcp-5.2.2/configure-9929-ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
##############################################
pcp-5.2.2/configure-9931- cat >>confdefs.h <<_ACEOF
pcp-5.2.2/configure:9932:#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
pcp-5.2.2/configure-9933-_ACEOF
##############################################
pcp-5.2.2/configure-9940-do :
pcp-5.2.2/configure:9941: as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
pcp-5.2.2/configure-9942-ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
##############################################
pcp-5.2.2/configure-9944- cat >>confdefs.h <<_ACEOF
pcp-5.2.2/configure:9945:#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
pcp-5.2.2/configure-9946-_ACEOF
##############################################
pcp-5.2.2/configure-9953-do :
pcp-5.2.2/configure:9954: as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
pcp-5.2.2/configure-9955-ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
##############################################
pcp-5.2.2/configure-9957- cat >>confdefs.h <<_ACEOF
pcp-5.2.2/configure:9958:#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
pcp-5.2.2/configure-9959-_ACEOF
##############################################
pcp-5.2.2/configure-9966-do :
pcp-5.2.2/configure:9967: as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
pcp-5.2.2/configure-9968-ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
##############################################
pcp-5.2.2/configure-9970- cat >>confdefs.h <<_ACEOF
pcp-5.2.2/configure:9971:#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
pcp-5.2.2/configure-9972-_ACEOF
##############################################
pcp-5.2.2/configure-9979-do :
pcp-5.2.2/configure:9980: as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
pcp-5.2.2/configure-9981-ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
##############################################
pcp-5.2.2/configure-9983- cat >>confdefs.h <<_ACEOF
pcp-5.2.2/configure:9984:#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
pcp-5.2.2/configure-9985-_ACEOF
##############################################
pcp-5.2.2/configure-9992-do :
pcp-5.2.2/configure:9993: as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
pcp-5.2.2/configure-9994-ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
##############################################
pcp-5.2.2/configure-9996- cat >>confdefs.h <<_ACEOF
pcp-5.2.2/configure:9997:#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
pcp-5.2.2/configure-9998-_ACEOF
##############################################
pcp-5.2.2/configure-10005-do :
pcp-5.2.2/configure:10006: as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
pcp-5.2.2/configure-10007-ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
##############################################
pcp-5.2.2/configure-10009- cat >>confdefs.h <<_ACEOF
pcp-5.2.2/configure:10010:#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
pcp-5.2.2/configure-10011-_ACEOF
##############################################
pcp-5.2.2/configure-10018-do :
pcp-5.2.2/configure:10019: as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
pcp-5.2.2/configure-10020-ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
##############################################
pcp-5.2.2/configure-10022- cat >>confdefs.h <<_ACEOF
pcp-5.2.2/configure:10023:#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
pcp-5.2.2/configure-10024-_ACEOF
##############################################
pcp-5.2.2/configure-10031-do :
pcp-5.2.2/configure:10032: as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
pcp-5.2.2/configure-10033-ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
##############################################
pcp-5.2.2/configure-10035- cat >>confdefs.h <<_ACEOF
pcp-5.2.2/configure:10036:#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
pcp-5.2.2/configure-10037-_ACEOF
##############################################
pcp-5.2.2/configure-10074-do :
pcp-5.2.2/configure:10075: as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
pcp-5.2.2/configure-10076-ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
##############################################
pcp-5.2.2/configure-10078- cat >>confdefs.h <<_ACEOF
pcp-5.2.2/configure:10079:#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
pcp-5.2.2/configure-10080-_ACEOF
##############################################
pcp-5.2.2/configure-10087-do :
pcp-5.2.2/configure:10088: as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
pcp-5.2.2/configure-10089-ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
##############################################
pcp-5.2.2/configure-10091- cat >>confdefs.h <<_ACEOF
pcp-5.2.2/configure:10092:#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
pcp-5.2.2/configure-10093-_ACEOF
##############################################
pcp-5.2.2/configure-10100-do :
pcp-5.2.2/configure:10101: as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
pcp-5.2.2/configure-10102-ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
##############################################
pcp-5.2.2/configure-10104- cat >>confdefs.h <<_ACEOF
pcp-5.2.2/configure:10105:#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
pcp-5.2.2/configure-10106-_ACEOF
##############################################
pcp-5.2.2/configure-10152-do :
pcp-5.2.2/configure:10153: as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
pcp-5.2.2/configure-10154-ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
##############################################
pcp-5.2.2/configure-10156- cat >>confdefs.h <<_ACEOF
pcp-5.2.2/configure:10157:#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
pcp-5.2.2/configure-10158-_ACEOF
##############################################
pcp-5.2.2/configure-10165-do :
pcp-5.2.2/configure:10166: as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
pcp-5.2.2/configure-10167-ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
##############################################
pcp-5.2.2/configure-10169- cat >>confdefs.h <<_ACEOF
pcp-5.2.2/configure:10170:#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
pcp-5.2.2/configure-10171-_ACEOF
##############################################
pcp-5.2.2/configure-10576- test $ac_status = 0; }; then
pcp-5.2.2/configure:10577: pkg_cv_openssl_CFLAGS=`$PKG_CONFIG --cflags "openssl >= 1.1.1" 2>/dev/null`
pcp-5.2.2/configure-10578- test "x$?" != "x0" && pkg_failed=yes
##############################################
pcp-5.2.2/configure-10593- test $ac_status = 0; }; then
pcp-5.2.2/configure:10594: pkg_cv_openssl_LIBS=`$PKG_CONFIG --libs "openssl >= 1.1.1" 2>/dev/null`
pcp-5.2.2/configure-10595- test "x$?" != "x0" && pkg_failed=yes
##############################################
pcp-5.2.2/configure-10614- if test $_pkg_short_errors_supported = yes; then
pcp-5.2.2/configure:10615: openssl_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "openssl >= 1.1.1" 2>&1`
pcp-5.2.2/configure-10616- else
pcp-5.2.2/configure:10617: openssl_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "openssl >= 1.1.1" 2>&1`
pcp-5.2.2/configure-10618- fi
##############################################
pcp-5.2.2/configure-10687- test $ac_status = 0; }; then
pcp-5.2.2/configure:10688: pkg_cv_libuv_CFLAGS=`$PKG_CONFIG --cflags "libuv >= 1.0" 2>/dev/null`
pcp-5.2.2/configure-10689- test "x$?" != "x0" && pkg_failed=yes
##############################################
pcp-5.2.2/configure-10704- test $ac_status = 0; }; then
pcp-5.2.2/configure:10705: pkg_cv_libuv_LIBS=`$PKG_CONFIG --libs "libuv >= 1.0" 2>/dev/null`
pcp-5.2.2/configure-10706- test "x$?" != "x0" && pkg_failed=yes
##############################################
pcp-5.2.2/configure-10725- if test $_pkg_short_errors_supported = yes; then
pcp-5.2.2/configure:10726: libuv_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libuv >= 1.0" 2>&1`
pcp-5.2.2/configure-10727- else
pcp-5.2.2/configure:10728: libuv_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libuv >= 1.0" 2>&1`
pcp-5.2.2/configure-10729- fi
##############################################
pcp-5.2.2/configure-10806- test $ac_status = 0; }; then
pcp-5.2.2/configure:10807: pkg_cv_libvarlink_CFLAGS=`$PKG_CONFIG --cflags "libvarlink" 2>/dev/null`
pcp-5.2.2/configure-10808- test "x$?" != "x0" && pkg_failed=yes
##############################################
pcp-5.2.2/configure-10823- test $ac_status = 0; }; then
pcp-5.2.2/configure:10824: pkg_cv_libvarlink_LIBS=`$PKG_CONFIG --libs "libvarlink" 2>/dev/null`
pcp-5.2.2/configure-10825- test "x$?" != "x0" && pkg_failed=yes
##############################################
pcp-5.2.2/configure-10844- if test $_pkg_short_errors_supported = yes; then
pcp-5.2.2/configure:10845: libvarlink_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libvarlink" 2>&1`
pcp-5.2.2/configure-10846- else
pcp-5.2.2/configure:10847: libvarlink_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libvarlink" 2>&1`
pcp-5.2.2/configure-10848- fi
##############################################
pcp-5.2.2/configure-10880- test $ac_status = 0; }; then
pcp-5.2.2/configure:10881: pkg_cv_ncurses_CFLAGS=`$PKG_CONFIG --cflags "ncurses" 2>/dev/null`
pcp-5.2.2/configure-10882- test "x$?" != "x0" && pkg_failed=yes
##############################################
pcp-5.2.2/configure-10897- test $ac_status = 0; }; then
pcp-5.2.2/configure:10898: pkg_cv_ncurses_LIBS=`$PKG_CONFIG --libs "ncurses" 2>/dev/null`
pcp-5.2.2/configure-10899- test "x$?" != "x0" && pkg_failed=yes
##############################################
pcp-5.2.2/configure-10918- if test $_pkg_short_errors_supported = yes; then
pcp-5.2.2/configure:10919: ncurses_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "ncurses" 2>&1`
pcp-5.2.2/configure-10920- else
pcp-5.2.2/configure:10921: ncurses_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "ncurses" 2>&1`
pcp-5.2.2/configure-10922- fi
##############################################
pcp-5.2.2/configure-10954- test $ac_status = 0; }; then
pcp-5.2.2/configure:10955: pkg_cv_DEVMAPPER_CFLAGS=`$PKG_CONFIG --cflags "devmapper" 2>/dev/null`
pcp-5.2.2/configure-10956- test "x$?" != "x0" && pkg_failed=yes
##############################################
pcp-5.2.2/configure-10971- test $ac_status = 0; }; then
pcp-5.2.2/configure:10972: pkg_cv_DEVMAPPER_LIBS=`$PKG_CONFIG --libs "devmapper" 2>/dev/null`
pcp-5.2.2/configure-10973- test "x$?" != "x0" && pkg_failed=yes
##############################################
pcp-5.2.2/configure-10992- if test $_pkg_short_errors_supported = yes; then
pcp-5.2.2/configure:10993: DEVMAPPER_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "devmapper" 2>&1`
pcp-5.2.2/configure-10994- else
pcp-5.2.2/configure:10995: DEVMAPPER_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "devmapper" 2>&1`
pcp-5.2.2/configure-10996- fi
##############################################
pcp-5.2.2/configure-11056- test $ac_status = 0; }; then
pcp-5.2.2/configure:11057: pkg_cv_SYSTEMD_CFLAGS=`$PKG_CONFIG --cflags "libsystemd" 2>/dev/null`
pcp-5.2.2/configure-11058- test "x$?" != "x0" && pkg_failed=yes
##############################################
pcp-5.2.2/configure-11073- test $ac_status = 0; }; then
pcp-5.2.2/configure:11074: pkg_cv_SYSTEMD_LIBS=`$PKG_CONFIG --libs "libsystemd" 2>/dev/null`
pcp-5.2.2/configure-11075- test "x$?" != "x0" && pkg_failed=yes
##############################################
pcp-5.2.2/configure-11094- if test $_pkg_short_errors_supported = yes; then
pcp-5.2.2/configure:11095: SYSTEMD_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libsystemd" 2>&1`
pcp-5.2.2/configure-11096- else
pcp-5.2.2/configure:11097: SYSTEMD_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libsystemd" 2>&1`
pcp-5.2.2/configure-11098- fi
##############################################
pcp-5.2.2/configure-11131- test $ac_status = 0; }; then
pcp-5.2.2/configure:11132: pkg_cv_SYSTEMD_CFLAGS=`$PKG_CONFIG --cflags "libsystemd-journal" 2>/dev/null`
pcp-5.2.2/configure-11133- test "x$?" != "x0" && pkg_failed=yes
##############################################
pcp-5.2.2/configure-11148- test $ac_status = 0; }; then
pcp-5.2.2/configure:11149: pkg_cv_SYSTEMD_LIBS=`$PKG_CONFIG --libs "libsystemd-journal" 2>/dev/null`
pcp-5.2.2/configure-11150- test "x$?" != "x0" && pkg_failed=yes
##############################################
pcp-5.2.2/configure-11169- if test $_pkg_short_errors_supported = yes; then
pcp-5.2.2/configure:11170: SYSTEMD_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libsystemd-journal" 2>&1`
pcp-5.2.2/configure-11171- else
pcp-5.2.2/configure:11172: SYSTEMD_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libsystemd-journal" 2>&1`
pcp-5.2.2/configure-11173- fi
##############################################
pcp-5.2.2/configure-12124-do :
pcp-5.2.2/configure:12125: as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
pcp-5.2.2/configure-12126-ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
##############################################
pcp-5.2.2/configure-12128- cat >>confdefs.h <<_ACEOF
pcp-5.2.2/configure:12129:#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
pcp-5.2.2/configure-12130-_ACEOF
##############################################
pcp-5.2.2/configure-12136-do :
pcp-5.2.2/configure:12137: as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
pcp-5.2.2/configure-12138-ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
##############################################
pcp-5.2.2/configure-12140- cat >>confdefs.h <<_ACEOF
pcp-5.2.2/configure:12141:#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
pcp-5.2.2/configure-12142-_ACEOF
##############################################
pcp-5.2.2/configure-12148-do :
pcp-5.2.2/configure:12149: as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
pcp-5.2.2/configure-12150-ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
##############################################
pcp-5.2.2/configure-12152- cat >>confdefs.h <<_ACEOF
pcp-5.2.2/configure:12153:#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
pcp-5.2.2/configure-12154-_ACEOF
##############################################
pcp-5.2.2/configure-12160-do :
pcp-5.2.2/configure:12161: as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
pcp-5.2.2/configure-12162-ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
##############################################
pcp-5.2.2/configure-12164- cat >>confdefs.h <<_ACEOF
pcp-5.2.2/configure:12165:#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
pcp-5.2.2/configure-12166-_ACEOF
##############################################
pcp-5.2.2/configure-12172-do :
pcp-5.2.2/configure:12173: as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
pcp-5.2.2/configure-12174-ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
##############################################
pcp-5.2.2/configure-12176- cat >>confdefs.h <<_ACEOF
pcp-5.2.2/configure:12177:#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
pcp-5.2.2/configure-12178-_ACEOF
##############################################
pcp-5.2.2/configure-12184-do :
pcp-5.2.2/configure:12185: as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
pcp-5.2.2/configure-12186-ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
##############################################
pcp-5.2.2/configure-12188- cat >>confdefs.h <<_ACEOF
pcp-5.2.2/configure:12189:#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
pcp-5.2.2/configure-12190-_ACEOF
##############################################
pcp-5.2.2/configure-12196-do :
pcp-5.2.2/configure:12197: as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
pcp-5.2.2/configure-12198-ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
##############################################
pcp-5.2.2/configure-12200- cat >>confdefs.h <<_ACEOF
pcp-5.2.2/configure:12201:#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
pcp-5.2.2/configure-12202-_ACEOF
##############################################
pcp-5.2.2/configure-12208-do :
pcp-5.2.2/configure:12209: as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
pcp-5.2.2/configure-12210-ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
##############################################
pcp-5.2.2/configure-12212- cat >>confdefs.h <<_ACEOF
pcp-5.2.2/configure:12213:#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
pcp-5.2.2/configure-12214-_ACEOF
##############################################
pcp-5.2.2/configure-12220-do :
pcp-5.2.2/configure:12221: as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
pcp-5.2.2/configure-12222-ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
##############################################
pcp-5.2.2/configure-12224- cat >>confdefs.h <<_ACEOF
pcp-5.2.2/configure:12225:#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
pcp-5.2.2/configure-12226-_ACEOF
##############################################
pcp-5.2.2/configure-12232-do :
pcp-5.2.2/configure:12233: as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
pcp-5.2.2/configure-12234-ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
##############################################
pcp-5.2.2/configure-12236- cat >>confdefs.h <<_ACEOF
pcp-5.2.2/configure:12237:#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
pcp-5.2.2/configure-12238-_ACEOF
##############################################
pcp-5.2.2/configure-12244-do :
pcp-5.2.2/configure:12245: as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
pcp-5.2.2/configure-12246-ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
##############################################
pcp-5.2.2/configure-12248- cat >>confdefs.h <<_ACEOF
pcp-5.2.2/configure:12249:#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
pcp-5.2.2/configure-12250-_ACEOF
##############################################
pcp-5.2.2/configure-12256-do :
pcp-5.2.2/configure:12257: as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
pcp-5.2.2/configure-12258-ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
##############################################
pcp-5.2.2/configure-12260- cat >>confdefs.h <<_ACEOF
pcp-5.2.2/configure:12261:#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
pcp-5.2.2/configure-12262-_ACEOF
##############################################
pcp-5.2.2/configure-12268-do :
pcp-5.2.2/configure:12269: as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
pcp-5.2.2/configure-12270-ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
##############################################
pcp-5.2.2/configure-12272- cat >>confdefs.h <<_ACEOF
pcp-5.2.2/configure:12273:#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
pcp-5.2.2/configure-12274-_ACEOF
##############################################
pcp-5.2.2/configure-12280-do :
pcp-5.2.2/configure:12281: as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
pcp-5.2.2/configure-12282-ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
##############################################
pcp-5.2.2/configure-12284- cat >>confdefs.h <<_ACEOF
pcp-5.2.2/configure:12285:#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
pcp-5.2.2/configure-12286-_ACEOF
##############################################
pcp-5.2.2/configure-12879- # Need to strip -arch foo args for gcc -E
pcp-5.2.2/configure:12880: _myflags=`echo "$CPPFLAGS" "$CFLAGS" | sed -e 's/-arch [^ ]*//g'`
pcp-5.2.2/configure-12881- else
##############################################
pcp-5.2.2/configure-13108-
pcp-5.2.2/configure:13109:fmt_uint64=`echo $fmt_int64 | sed -e 's/d$/u/'`
pcp-5.2.2/configure-13110-
##############################################
pcp-5.2.2/configure-13236- then
pcp-5.2.2/configure:13237: LIBS=`echo $LIBS -l$cand`
pcp-5.2.2/configure-13238- fi
##############################################
pcp-5.2.2/configure-14374-
pcp-5.2.2/configure:14375:pcp_etc_dir=`eval echo $sysconfdir`
pcp-5.2.2/configure:14376:pcp_etc_dir=`eval echo $pcp_etc_dir`
pcp-5.2.2/configure-14377-
pcp-5.2.2/configure:14378:pcp_saslconf_dir=`eval echo $sysconfdir/sasl2`
pcp-5.2.2/configure:14379:pcp_saslconf_dir=`eval echo $pcp_saslconf_dir`
pcp-5.2.2/configure-14380-
pcp-5.2.2/configure:14381:pcp_sysconf_dir=`eval echo $sysconfdir/pcp`
pcp-5.2.2/configure:14382:pcp_sysconf_dir=`eval echo $pcp_sysconf_dir`
pcp-5.2.2/configure-14383-
##############################################
pcp-5.2.2/configure-14398-
pcp-5.2.2/configure:14399:pcp_share_dir=`eval echo $datarootdir/pcp`
pcp-5.2.2/configure:14400:pcp_share_dir=`eval echo $pcp_share_dir`
pcp-5.2.2/configure-14401-
pcp-5.2.2/configure-14402-
pcp-5.2.2/configure:14403:pcp_binadm_dir=`eval echo $libexecdir/pcp/bin`
pcp-5.2.2/configure:14404:pcp_binadm_dir=`eval echo $pcp_binadm_dir`
pcp-5.2.2/configure-14405-
pcp-5.2.2/configure-14406-
pcp-5.2.2/configure:14407:pcp_libadm_dir=`eval echo $libexecdir/pcp/lib`
pcp-5.2.2/configure:14408:pcp_libadm_dir=`eval echo $pcp_libadm_dir`
pcp-5.2.2/configure-14409-
pcp-5.2.2/configure-14410-
pcp-5.2.2/configure:14411:pcp_var_dir=`eval echo $localstatedir/lib/pcp`
pcp-5.2.2/configure:14412:pcp_var_dir=`eval echo $pcp_var_dir`
pcp-5.2.2/configure-14413-
##############################################
pcp-5.2.2/configure-14416-
pcp-5.2.2/configure:14417:pcp_pmnsadm_dir=`eval echo $libexecdir/pcp/pmns`
pcp-5.2.2/configure:14418:pcp_pmnsadm_dir=`eval echo $pcp_pmnsadm_dir`
pcp-5.2.2/configure-14419-
##############################################
pcp-5.2.2/configure-14422-
pcp-5.2.2/configure:14423:pcp_pmdasadm_dir=`eval echo $libexecdir/pcp/pmdas`
pcp-5.2.2/configure:14424:pcp_pmdasadm_dir=`eval echo $pcp_pmdasadm_dir`
pcp-5.2.2/configure-14425-
##############################################
pcp-5.2.2/configure-14428-
pcp-5.2.2/configure:14429:pcp_selinuxadm_dir=`eval echo $libexecdir/pcp/selinux`
pcp-5.2.2/configure:14430:pcp_selinuxadm_dir=`eval echo $pcp_selinuxadm_dir`
pcp-5.2.2/configure-14431-
pcp-5.2.2/configure-14432-
pcp-5.2.2/configure:14433:pcp_lib_dir=`eval echo $libdir`
pcp-5.2.2/configure:14434:pcp_lib_dir=`eval echo $pcp_lib_dir`
pcp-5.2.2/configure:14435:pcp_lib32_dir=`echo $pcp_lib_dir | sed -e s,64,, -e s,//,/,`
pcp-5.2.2/configure-14436-
##############################################
pcp-5.2.2/configure-14446-
pcp-5.2.2/configure:14447:perl_installdirs=`eval echo $perl_installdirs`
pcp-5.2.2/configure:14448:perl_installdirs=`eval echo $perl_installdirs`
pcp-5.2.2/configure-14449-
##############################################
pcp-5.2.2/configure-14457-
pcp-5.2.2/configure:14458:perl_install_base=`eval echo $perl_install_base`
pcp-5.2.2/configure:14459:perl_install_base=`eval echo $perl_install_base`
pcp-5.2.2/configure-14460-
##############################################
pcp-5.2.2/configure-14469-
pcp-5.2.2/configure:14470:python_prefix=`eval echo $python_prefix`
pcp-5.2.2/configure:14471:python_prefix=`eval echo $python_prefix`
pcp-5.2.2/configure-14472-
##############################################
pcp-5.2.2/configure-14508- for ac_var in incroot usrlibdir libdir; do
pcp-5.2.2/configure:14509: eval "ac_im_$ac_var=\`\${MAKE-make} $ac_var 2>/dev/null | sed -n 's/^$ac_var=//p'\`"
pcp-5.2.2/configure-14510- done
##############################################
pcp-5.2.2/configure-14618- LIBS=$ac_save_LIBS
pcp-5.2.2/configure:14619:for ac_dir in `$as_echo "$ac_x_includes $ac_x_header_dirs" | sed s/include/lib/g`
pcp-5.2.2/configure-14620-do
##############################################
pcp-5.2.2/configure-15174-man_header=
pcp-5.2.2/configure:15175:pcp_man_dir=`eval echo $mandir`
pcp-5.2.2/configure:15176:pcp_man_dir=`eval echo $pcp_man_dir`
pcp-5.2.2/configure-15177-
##############################################
pcp-5.2.2/configure-15183- test -s conftest || continue
pcp-5.2.2/configure:15184: try=`grep '\.1\.gz$' conftest | head -1`
pcp-5.2.2/configure-15185- if test -n "$try"
##############################################
pcp-5.2.2/configure-15188- have_manpages=true
pcp-5.2.2/configure:15189: man_header=`$ZIP -d < "$d/$sd/$try" | head -1`
pcp-5.2.2/configure-15190- break
pcp-5.2.2/configure-15191- fi
pcp-5.2.2/configure:15192: try=`grep '\.1\.bz2$' conftest | head -1`
pcp-5.2.2/configure-15193- if test -n "$try"
##############################################
pcp-5.2.2/configure-15196- have_manpages=true
pcp-5.2.2/configure:15197: man_header=`$BZIP2 -d < "$d/$sd/$try" | head -1`
pcp-5.2.2/configure-15198- break
pcp-5.2.2/configure-15199- fi
pcp-5.2.2/configure:15200: try=`grep '\.1\.lzma$' conftest | head -1`
pcp-5.2.2/configure-15201- if test -n "$try"
##############################################
pcp-5.2.2/configure-15204- have_manpages=true
pcp-5.2.2/configure:15205: man_header=`$LZMA -d < "$d/$sd/$try" | head -1`
pcp-5.2.2/configure-15206- break
pcp-5.2.2/configure-15207- fi
pcp-5.2.2/configure:15208: try=`grep '\.1\.xz$' conftest | head -1`
pcp-5.2.2/configure-15209- if test -n "$try"
##############################################
pcp-5.2.2/configure-15212- have_manpages=true
pcp-5.2.2/configure:15213: man_header=`$XZ -d < "$d/$sd/$try" | head -1`
pcp-5.2.2/configure-15214- break
pcp-5.2.2/configure-15215- fi
pcp-5.2.2/configure:15216: try=`grep '\.1$' conftest | head -1`
pcp-5.2.2/configure-15217- if test -n "$try"
pcp-5.2.2/configure-15218- then
pcp-5.2.2/configure:15219: man_header=`head -1 $d/$sd/$try`
pcp-5.2.2/configure-15220- have_manpages=true
##############################################
pcp-5.2.2/configure-15254-
pcp-5.2.2/configure:15255:pcp_bin_dir=`eval echo $bindir`
pcp-5.2.2/configure:15256:pcp_bin_dir=`eval echo $pcp_bin_dir`
pcp-5.2.2/configure-15257-
pcp-5.2.2/configure-15258-
pcp-5.2.2/configure:15259:pcp_sbin_dir=`eval echo $sbindir`
pcp-5.2.2/configure:15260:pcp_sbin_dir=`eval echo $pcp_sbin_dir`
pcp-5.2.2/configure-15261-
pcp-5.2.2/configure-15262-
pcp-5.2.2/configure:15263:pcp_inc_dir=`eval echo $includedir/pcp`
pcp-5.2.2/configure:15264:pcp_inc_dir=`eval echo $pcp_inc_dir`
pcp-5.2.2/configure-15265-
##############################################
pcp-5.2.2/configure-15267-if test $target_os = linux; then
pcp-5.2.2/configure:15268: pcp_books_dir=`eval echo $datarootdir/doc/pcp-doc`
pcp-5.2.2/configure-15269-else
pcp-5.2.2/configure:15270: pcp_books_dir=`eval echo $datarootdir/doc/pcp`
pcp-5.2.2/configure-15271-fi
pcp-5.2.2/configure:15272:pcp_books_dir=`eval echo $pcp_books_dir`
pcp-5.2.2/configure:15273:pcp_html_dir=`eval echo $pcp_books_dir/html`
pcp-5.2.2/configure-15274-
##############################################
pcp-5.2.2/configure-15277-if test $target_os = linux; then
pcp-5.2.2/configure:15278: pcp_icons_dir=`eval echo $datarootdir/pcp-gui/pixmaps`
pcp-5.2.2/configure-15279-else
pcp-5.2.2/configure:15280: pcp_icons_dir=`eval echo $datarootdir/pcp/pixmaps`
pcp-5.2.2/configure-15281-fi
pcp-5.2.2/configure:15282:pcp_icons_dir=`eval echo $pcp_icons_dir`
pcp-5.2.2/configure-15283-
##############################################
pcp-5.2.2/configure-15336-
pcp-5.2.2/configure:15337:pcp_desktop_dir=`eval echo $datarootdir/applications`
pcp-5.2.2/configure:15338:pcp_desktop_dir=`eval echo $pcp_desktop_dir`
pcp-5.2.2/configure-15339-
##############################################
pcp-5.2.2/configure-15380-
pcp-5.2.2/configure:15381:pcp_log_dir=`eval echo $pcp_log_dir`
pcp-5.2.2/configure:15382:pcp_log_dir=`eval echo $pcp_log_dir`
pcp-5.2.2/configure-15383-
##############################################
pcp-5.2.2/configure-15407-
pcp-5.2.2/configure:15408:pcp_run_dir=`eval echo $pcp_run_dir`
pcp-5.2.2/configure:15409:pcp_run_dir=`eval echo $pcp_run_dir`
pcp-5.2.2/configure-15410-
##############################################
pcp-5.2.2/configure-15419-
pcp-5.2.2/configure:15420:pcp_tmpfile_dir=`eval echo $pcp_tmpfile_dir`
pcp-5.2.2/configure:15421:pcp_tmpfile_dir=`eval echo $pcp_tmpfile_dir`
pcp-5.2.2/configure-15422-
pcp-5.2.2/configure-15423-
pcp-5.2.2/configure:15424:pcp_tmp_dir=`eval echo $pcp_var_dir/tmp`
pcp-5.2.2/configure-15425-
##############################################
pcp-5.2.2/configure-15434-
pcp-5.2.2/configure:15435:pcp_doc_dir=`eval echo $pcp_doc_dir`
pcp-5.2.2/configure:15436:pcp_doc_dir=`eval echo $pcp_doc_dir`
pcp-5.2.2/configure-15437-
##############################################
pcp-5.2.2/configure-16154- test $ac_status = 0; }; then
pcp-5.2.2/configure:16155: pkg_cv_lzma_CFLAGS=`$PKG_CONFIG --cflags "liblzma" 2>/dev/null`
pcp-5.2.2/configure-16156- test "x$?" != "x0" && pkg_failed=yes
##############################################
pcp-5.2.2/configure-16171- test $ac_status = 0; }; then
pcp-5.2.2/configure:16172: pkg_cv_lzma_LIBS=`$PKG_CONFIG --libs "liblzma" 2>/dev/null`
pcp-5.2.2/configure-16173- test "x$?" != "x0" && pkg_failed=yes
##############################################
pcp-5.2.2/configure-16192- if test $_pkg_short_errors_supported = yes; then
pcp-5.2.2/configure:16193: lzma_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "liblzma" 2>&1`
pcp-5.2.2/configure-16194- else
pcp-5.2.2/configure:16195: lzma_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "liblzma" 2>&1`
pcp-5.2.2/configure-16196- fi
##############################################
pcp-5.2.2/configure-16621- test $ac_status = 0; }; then
pcp-5.2.2/configure:16622: pkg_cv_zlib_CFLAGS=`$PKG_CONFIG --cflags "zlib >= 1.0.0" 2>/dev/null`
pcp-5.2.2/configure-16623- test "x$?" != "x0" && pkg_failed=yes
##############################################
pcp-5.2.2/configure-16638- test $ac_status = 0; }; then
pcp-5.2.2/configure:16639: pkg_cv_zlib_LIBS=`$PKG_CONFIG --libs "zlib >= 1.0.0" 2>/dev/null`
pcp-5.2.2/configure-16640- test "x$?" != "x0" && pkg_failed=yes
##############################################
pcp-5.2.2/configure-16659- if test $_pkg_short_errors_supported = yes; then
pcp-5.2.2/configure:16660: zlib_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "zlib >= 1.0.0" 2>&1`
pcp-5.2.2/configure-16661- else
pcp-5.2.2/configure:16662: zlib_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "zlib >= 1.0.0" 2>&1`
pcp-5.2.2/configure-16663- fi
##############################################
pcp-5.2.2/configure-16709-
pcp-5.2.2/configure:16710:pcp_prefix=`eval echo $prefix`
pcp-5.2.2/configure-16711-
##############################################
pcp-5.2.2/configure-16814- ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
pcp-5.2.2/configure:16815: ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
pcp-5.2.2/configure-16816- # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
##############################################
pcp-5.2.2/configure-16881-if test -z "$BASH_VERSION$ZSH_VERSION" \
pcp-5.2.2/configure:16882: && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
pcp-5.2.2/configure-16883- as_echo='print -r --'
pcp-5.2.2/configure-16884- as_echo_n='print -rn --'
pcp-5.2.2/configure:16885:elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
pcp-5.2.2/configure-16886- as_echo='printf %s\n'
##############################################
pcp-5.2.2/configure-16888-else
pcp-5.2.2/configure:16889: if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
pcp-5.2.2/configure-16890- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
##############################################
pcp-5.2.2/configure-16898- expr "X$arg" : "X\\(.*\\)$as_nl";
pcp-5.2.2/configure:16899: arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
pcp-5.2.2/configure-16900- esac;
##############################################
pcp-5.2.2/configure-16975-# ----------------------------------------
pcp-5.2.2/configure:16976:# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
pcp-5.2.2/configure-16977-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
##############################################
pcp-5.2.2/configure-17047- {
pcp-5.2.2/configure:17048: as_val=`expr "$@" || test $? -eq 1`
pcp-5.2.2/configure-17049- }
##############################################
pcp-5.2.2/configure-17151- case $as_dir in #(
pcp-5.2.2/configure:17152: *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
pcp-5.2.2/configure-17153- *) as_qdir=$as_dir;;
##############################################
pcp-5.2.2/configure-17282-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
pcp-5.2.2/configure:17283:ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
pcp-5.2.2/configure-17284-ac_cs_version="\\
##############################################
pcp-5.2.2/configure-17304- --*=?*)
pcp-5.2.2/configure:17305: ac_option=`expr "X$1" : 'X\([^=]*\)='`
pcp-5.2.2/configure:17306: ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
pcp-5.2.2/configure-17307- ac_shift=:
##############################################
pcp-5.2.2/configure-17309- --*=)
pcp-5.2.2/configure:17310: ac_option=`expr "X$1" : 'X\([^=]*\)='`
pcp-5.2.2/configure-17311- ac_optarg=
##############################################
pcp-5.2.2/configure-17333- case $ac_optarg in
pcp-5.2.2/configure:17334: *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
pcp-5.2.2/configure-17335- '') as_fn_error $? "missing file argument" ;;
##############################################
pcp-5.2.2/configure-17341- case $ac_optarg in
pcp-5.2.2/configure:17342: *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
pcp-5.2.2/configure-17343- esac
##############################################
pcp-5.2.2/configure-17473-fi
pcp-5.2.2/configure:17474:ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
pcp-5.2.2/configure-17475-if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
##############################################
pcp-5.2.2/configure-17490- as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
pcp-5.2.2/configure:17491:ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
pcp-5.2.2/configure-17492-ac_delim='%!_!# '
##############################################
pcp-5.2.2/configure-17496-
pcp-5.2.2/configure:17497: ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
pcp-5.2.2/configure-17498- if test $ac_delim_n = $ac_delim_num; then
##############################################
pcp-5.2.2/configure-17634-for ac_last_try in false false :; do
pcp-5.2.2/configure:17635: ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
pcp-5.2.2/configure-17636- if test -z "$ac_tt"; then
##############################################
pcp-5.2.2/configure-17766- esac
pcp-5.2.2/configure:17767: case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
pcp-5.2.2/configure-17768- as_fn_append ac_file_inputs " '$ac_f'"
##############################################
pcp-5.2.2/configure-17825-*)
pcp-5.2.2/configure:17826: ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
pcp-5.2.2/configure-17827- # A ".." for each directory in $ac_dir_suffix.
pcp-5.2.2/configure:17828: ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
pcp-5.2.2/configure-17829- case $ac_top_builddir_sub in
##############################################
pcp-5.2.2/configure-17877-/@mandir@/p'
pcp-5.2.2/configure:17878:case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
pcp-5.2.2/configure-17879-*datarootdir*) ac_datarootdir_seen=yes;;
##############################################
pcp-5.2.2/configure-17894-
pcp-5.2.2/configure:17895:# Neutralize VPATH when `$srcdir' = `.'.
pcp-5.2.2/configure-17896-# Shell code in configure.ac might set extrasub.
##############################################
pcp-5.2.2/configure-17920-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
pcp-5.2.2/configure:17921: { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
pcp-5.2.2/configure-17922- { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \
##############################################
pcp-5.2.2/configure.ac-231- dnl build and build_os. Squash all x86 cpus into one LCD form - i386
pcp-5.2.2/configure.ac:232: target=`echo $target | sed '[s/^\([^-][^-]*-[^-][^-]*-[^-][^-]*\)-.*$/\1/]'`
pcp-5.2.2/configure.ac:233: target_os=`echo $target_os | sed '[s/solaris2\..*/solaris/]'`
pcp-5.2.2/configure.ac:234: target_os=`echo $target_os | sed '[s/^\([^-][^-]*\)-.*$/\1/]' | sed '[s/[\.0-9]*//g]'`
pcp-5.2.2/configure.ac-235-
pcp-5.2.2/configure.ac:236: build=`echo $build | sed '[s/^\([^-][^-]*-[^-][^-]*-[^-][^-]*\)-.*$/\1/]'`
pcp-5.2.2/configure.ac:237: build_os=`echo $build_os | sed '[s/solaris2\..*/solaris/]'`
pcp-5.2.2/configure.ac:238: build_os=`echo $build_os | sed '[s/^\([^-][^-]*\)-.*$/\1/]'`
pcp-5.2.2/configure.ac-239-fi
##############################################
pcp-5.2.2/configure.ac-581-AC_PROG_LEX
pcp-5.2.2/configure.ac:582:lex=`$echo $LEX | awk '{print $1}'`
pcp-5.2.2/configure.ac:583:lex=`$which "$lex"`
pcp-5.2.2/configure.ac-584-if test ! -x "$lex"; then
##############################################
pcp-5.2.2/configure.ac-590-AC_PROG_YACC
pcp-5.2.2/configure.ac:591:yacc=`$echo $YACC | awk '{print $1}'`
pcp-5.2.2/configure.ac:592:yacc=`$which "$yacc"`
pcp-5.2.2/configure.ac-593-if test ! -x "$yacc"; then
##############################################
pcp-5.2.2/configure.ac-617-else
pcp-5.2.2/configure.ac:618: sort=`$which sort`
pcp-5.2.2/configure.ac-619-fi
##############################################
pcp-5.2.2/configure.ac-802- # use SOURCE_DATE_EPOCH for a deterministic builddate (reproducible builds)
pcp-5.2.2/configure.ac:803: PACKAGE_BUILD_DATE=`TZ=UTC date -d "@${SOURCE_DATE_EPOCH:-$(date +%s)}" +%Y-%m-%d 2>/dev/null`
pcp-5.2.2/configure.ac-804- test $? -eq 0 || PACKAGE_BUILD_DATE=`date +%Y-%m-%d`
##############################################
pcp-5.2.2/configure.ac-813-dnl generate PM_VERSION_CURRENT for header
pcp-5.2.2/configure.ac:814:pm_version_current=`awk </dev/null "BEGIN { print (${PACKAGE_MAJOR}*256+${PACKAGE_MINOR})*256+${PACKAGE_REVISION} }"`
pcp-5.2.2/configure.ac-815-AC_SUBST(pm_version_current)
##############################################
pcp-5.2.2/configure.ac-872- ubuntu)
pcp-5.2.2/configure.ac:873: VERSION_NO=`echo "$VERSION_ID" | sed 's/[[^0-9]]//'`
pcp-5.2.2/configure.ac-874- if test "$VERSION_NO" -ge 2004; then
##############################################
pcp-5.2.2/configure.ac-896- AC_MSG_CHECKING([Python2 version])
pcp-5.2.2/configure.ac:897: eval `$PYTHON -V 2>&1 | awk '/^Python/ { ver=2; print $ver }' | awk -F. '{ major=1; minor=2; point=3; printf "export PY_MAJOR=%d PY_MINOR=%d PY_POINT=%d\n",$major,$minor,$point }'`
pcp-5.2.2/configure.ac-898- AC_MSG_RESULT([$PY_MAJOR.$PY_MINOR.$PY_POINT])
##############################################
pcp-5.2.2/configure.ac-928- AC_MSG_CHECKING([Python3 version])
pcp-5.2.2/configure.ac:929: eval `$PYTHON3 -V 2>&1 | awk '/^Python/ { ver=2; print $ver }' | awk -F. '{ major=1; minor=2; point=3; printf "export PY_MAJOR=%d PY_MINOR=%d PY_POINT=%d\n",$major,$minor,$point }'`
pcp-5.2.2/configure.ac-930- AC_MSG_RESULT([$PY_MAJOR.$PY_MINOR.$PY_POINT])
##############################################
pcp-5.2.2/configure.ac-1352- fi
pcp-5.2.2/configure.ac:1353: eval `$qmake --version 2>&1 | awk '/Using Qt version/ { ver=4; print $ver }' | awk -F. '{ major=1; minor=2; point=3; printf "export QT_MAJOR=%d QT_MINOR=%d QT_POINT=%d\n",$major,$minor,$point }'`
pcp-5.2.2/configure.ac-1354- AC_MSG_RESULT([$QT_MAJOR.$QT_MINOR.$QT_POINT])
##############################################
pcp-5.2.2/configure.ac-2471- # Need to strip -arch foo args for gcc -E
pcp-5.2.2/configure.ac:2472: _myflags=`echo "$CPPFLAGS" "$CFLAGS" | sed -e 's/-arch [[^ ]]*//g'`
pcp-5.2.2/configure.ac-2473- else
##############################################
pcp-5.2.2/configure.ac-2703-dnl and the unsigned version of this ...
pcp-5.2.2/configure.ac:2704:fmt_uint64=`echo $fmt_int64 | sed -e 's/d$/u/'`
pcp-5.2.2/configure.ac-2705-AC_SUBST(fmt_uint64)
##############################################
pcp-5.2.2/configure.ac-2791- then
pcp-5.2.2/configure.ac:2792: LIBS=`echo $LIBS -l$cand`
pcp-5.2.2/configure.ac-2793- fi
##############################################
pcp-5.2.2/configure.ac-3268-dnl
pcp-5.2.2/configure.ac:3269:pcp_etc_dir=`eval echo $sysconfdir`
pcp-5.2.2/configure.ac:3270:pcp_etc_dir=`eval echo $pcp_etc_dir`
pcp-5.2.2/configure.ac-3271-AC_SUBST(pcp_etc_dir)
pcp-5.2.2/configure.ac:3272:pcp_saslconf_dir=`eval echo $sysconfdir/sasl2`
pcp-5.2.2/configure.ac:3273:pcp_saslconf_dir=`eval echo $pcp_saslconf_dir`
pcp-5.2.2/configure.ac-3274-AC_SUBST(pcp_saslconf_dir)
pcp-5.2.2/configure.ac:3275:pcp_sysconf_dir=`eval echo $sysconfdir/pcp`
pcp-5.2.2/configure.ac:3276:pcp_sysconf_dir=`eval echo $pcp_sysconf_dir`
pcp-5.2.2/configure.ac-3277-AC_SUBST(pcp_sysconf_dir)
##############################################
pcp-5.2.2/configure.ac-3293-dnl shared PCP files (shareable for diskless)
pcp-5.2.2/configure.ac:3294:pcp_share_dir=`eval echo $datarootdir/pcp`
pcp-5.2.2/configure.ac:3295:pcp_share_dir=`eval echo $pcp_share_dir`
pcp-5.2.2/configure.ac-3296-AC_SUBST(pcp_share_dir)
##############################################
pcp-5.2.2/configure.ac-3298-dnl private PCP executables
pcp-5.2.2/configure.ac:3299:pcp_binadm_dir=`eval echo $libexecdir/pcp/bin`
pcp-5.2.2/configure.ac:3300:pcp_binadm_dir=`eval echo $pcp_binadm_dir`
pcp-5.2.2/configure.ac-3301-AC_SUBST(pcp_binadm_dir)
##############################################
pcp-5.2.2/configure.ac-3303-dnl private PCP libraries
pcp-5.2.2/configure.ac:3304:pcp_libadm_dir=`eval echo $libexecdir/pcp/lib`
pcp-5.2.2/configure.ac:3305:pcp_libadm_dir=`eval echo $pcp_libadm_dir`
pcp-5.2.2/configure.ac-3306-AC_SUBST(pcp_libadm_dir)
##############################################
pcp-5.2.2/configure.ac-3308-dnl non-shared (i.e. system local) PCP files
pcp-5.2.2/configure.ac:3309:pcp_var_dir=`eval echo $localstatedir/lib/pcp`
pcp-5.2.2/configure.ac:3310:pcp_var_dir=`eval echo $pcp_var_dir`
pcp-5.2.2/configure.ac-3311-AC_SUBST(pcp_var_dir)
##############################################
pcp-5.2.2/configure.ac-3314-AC_SUBST(pcp_pmns_dir)
pcp-5.2.2/configure.ac:3315:pcp_pmnsadm_dir=`eval echo $libexecdir/pcp/pmns`
pcp-5.2.2/configure.ac:3316:pcp_pmnsadm_dir=`eval echo $pcp_pmnsadm_dir`
pcp-5.2.2/configure.ac-3317-AC_SUBST(pcp_pmnsadm_dir)
##############################################
pcp-5.2.2/configure.ac-3320-AC_SUBST(pcp_pmdas_dir)
pcp-5.2.2/configure.ac:3321:pcp_pmdasadm_dir=`eval echo $libexecdir/pcp/pmdas`
pcp-5.2.2/configure.ac:3322:pcp_pmdasadm_dir=`eval echo $pcp_pmdasadm_dir`
pcp-5.2.2/configure.ac-3323-AC_SUBST(pcp_pmdasadm_dir)
##############################################
pcp-5.2.2/configure.ac-3326-AC_SUBST(pcp_selinux_dir)
pcp-5.2.2/configure.ac:3327:pcp_selinuxadm_dir=`eval echo $libexecdir/pcp/selinux`
pcp-5.2.2/configure.ac:3328:pcp_selinuxadm_dir=`eval echo $pcp_selinuxadm_dir`
pcp-5.2.2/configure.ac-3329-AC_SUBST(pcp_selinuxadm_dir)
##############################################
pcp-5.2.2/configure.ac-3331-dnl runtime shared libraries
pcp-5.2.2/configure.ac:3332:pcp_lib_dir=`eval echo $libdir`
pcp-5.2.2/configure.ac:3333:pcp_lib_dir=`eval echo $pcp_lib_dir`
pcp-5.2.2/configure.ac:3334:pcp_lib32_dir=`echo $pcp_lib_dir | sed -e s,64,, -e s,//,/,`
pcp-5.2.2/configure.ac-3335-AC_SUBST(pcp_lib_dir)
##############################################
pcp-5.2.2/configure.ac-3341- [perl_installdirs=vendor])
pcp-5.2.2/configure.ac:3342:perl_installdirs=`eval echo $perl_installdirs`
pcp-5.2.2/configure.ac:3343:perl_installdirs=`eval echo $perl_installdirs`
pcp-5.2.2/configure.ac-3344-AC_SUBST(perl_installdirs)
##############################################
pcp-5.2.2/configure.ac-3347- [perl_install_base=$prefix])
pcp-5.2.2/configure.ac:3348:perl_install_base=`eval echo $perl_install_base`
pcp-5.2.2/configure.ac:3349:perl_install_base=`eval echo $perl_install_base`
pcp-5.2.2/configure.ac-3350-AC_SUBST(perl_install_base)
##############################################
pcp-5.2.2/configure.ac-3354- [python_prefix=$prefix])
pcp-5.2.2/configure.ac:3355:python_prefix=`eval echo $python_prefix`
pcp-5.2.2/configure.ac:3356:python_prefix=`eval echo $python_prefix`
pcp-5.2.2/configure.ac-3357-AC_SUBST(python_prefix)
##############################################
pcp-5.2.2/configure.ac-3377-man_header=
pcp-5.2.2/configure.ac:3378:pcp_man_dir=`eval echo $mandir`
pcp-5.2.2/configure.ac:3379:pcp_man_dir=`eval echo $pcp_man_dir`
pcp-5.2.2/configure.ac-3380-
##############################################
pcp-5.2.2/configure.ac-3389- test -s conftest || continue
pcp-5.2.2/configure.ac:3390: try=`grep '\.1\.gz$' conftest | head -1`
pcp-5.2.2/configure.ac-3391- if test -n "$try"
##############################################
pcp-5.2.2/configure.ac-3394- have_manpages=true
pcp-5.2.2/configure.ac:3395: man_header=`$ZIP -d < "$d/$sd/$try" | head -1`
pcp-5.2.2/configure.ac-3396- break
pcp-5.2.2/configure.ac-3397- fi
pcp-5.2.2/configure.ac:3398: try=`grep '\.1\.bz2$' conftest | head -1`
pcp-5.2.2/configure.ac-3399- if test -n "$try"
##############################################
pcp-5.2.2/configure.ac-3402- have_manpages=true
pcp-5.2.2/configure.ac:3403: man_header=`$BZIP2 -d < "$d/$sd/$try" | head -1`
pcp-5.2.2/configure.ac-3404- break
pcp-5.2.2/configure.ac-3405- fi
pcp-5.2.2/configure.ac:3406: try=`grep '\.1\.lzma$' conftest | head -1`
pcp-5.2.2/configure.ac-3407- if test -n "$try"
##############################################
pcp-5.2.2/configure.ac-3410- have_manpages=true
pcp-5.2.2/configure.ac:3411: man_header=`$LZMA -d < "$d/$sd/$try" | head -1`
pcp-5.2.2/configure.ac-3412- break
pcp-5.2.2/configure.ac-3413- fi
pcp-5.2.2/configure.ac:3414: try=`grep '\.1\.xz$' conftest | head -1`
pcp-5.2.2/configure.ac-3415- if test -n "$try"
##############################################
pcp-5.2.2/configure.ac-3418- have_manpages=true
pcp-5.2.2/configure.ac:3419: man_header=`$XZ -d < "$d/$sd/$try" | head -1`
pcp-5.2.2/configure.ac-3420- break
pcp-5.2.2/configure.ac-3421- fi
pcp-5.2.2/configure.ac:3422: try=`grep '\.1$' conftest | head -1`
pcp-5.2.2/configure.ac-3423- if test -n "$try"
pcp-5.2.2/configure.ac-3424- then
pcp-5.2.2/configure.ac:3425: man_header=`head -1 $d/$sd/$try`
pcp-5.2.2/configure.ac-3426- have_manpages=true
##############################################
pcp-5.2.2/configure.ac-3464-dnl public binaries
pcp-5.2.2/configure.ac:3465:pcp_bin_dir=`eval echo $bindir`
pcp-5.2.2/configure.ac:3466:pcp_bin_dir=`eval echo $pcp_bin_dir`
pcp-5.2.2/configure.ac-3467-AC_SUBST(pcp_bin_dir)
pcp-5.2.2/configure.ac-3468-
pcp-5.2.2/configure.ac:3469:pcp_sbin_dir=`eval echo $sbindir`
pcp-5.2.2/configure.ac:3470:pcp_sbin_dir=`eval echo $pcp_sbin_dir`
pcp-5.2.2/configure.ac-3471-AC_SUBST(pcp_sbin_dir)
##############################################
pcp-5.2.2/configure.ac-3473-dnl include files
pcp-5.2.2/configure.ac:3474:pcp_inc_dir=`eval echo $includedir/pcp`
pcp-5.2.2/configure.ac:3475:pcp_inc_dir=`eval echo $pcp_inc_dir`
pcp-5.2.2/configure.ac-3476-AC_SUBST(pcp_inc_dir)
##############################################
pcp-5.2.2/configure.ac-3479-if test $target_os = linux; then
pcp-5.2.2/configure.ac:3480: pcp_books_dir=`eval echo $datarootdir/doc/pcp-doc`
pcp-5.2.2/configure.ac-3481-else
pcp-5.2.2/configure.ac:3482: pcp_books_dir=`eval echo $datarootdir/doc/pcp`
pcp-5.2.2/configure.ac-3483-fi
pcp-5.2.2/configure.ac:3484:pcp_books_dir=`eval echo $pcp_books_dir`
pcp-5.2.2/configure.ac:3485:pcp_html_dir=`eval echo $pcp_books_dir/html`
pcp-5.2.2/configure.ac-3486-AC_SUBST(pcp_books_dir)
##############################################
pcp-5.2.2/configure.ac-3490-if test $target_os = linux; then
pcp-5.2.2/configure.ac:3491: pcp_icons_dir=`eval echo $datarootdir/pcp-gui/pixmaps`
pcp-5.2.2/configure.ac-3492-else
pcp-5.2.2/configure.ac:3493: pcp_icons_dir=`eval echo $datarootdir/pcp/pixmaps`
pcp-5.2.2/configure.ac-3494-fi
pcp-5.2.2/configure.ac:3495:pcp_icons_dir=`eval echo $pcp_icons_dir`
pcp-5.2.2/configure.ac-3496-AC_SUBST(pcp_icons_dir)
##############################################
pcp-5.2.2/configure.ac-3510-dnl desktop application entries
pcp-5.2.2/configure.ac:3511:pcp_desktop_dir=`eval echo $datarootdir/applications`
pcp-5.2.2/configure.ac:3512:pcp_desktop_dir=`eval echo $pcp_desktop_dir`
pcp-5.2.2/configure.ac-3513-AC_SUBST(pcp_desktop_dir)
##############################################
pcp-5.2.2/configure.ac-3541- [pcp_log_dir=$localstatedir/log/pcp])
pcp-5.2.2/configure.ac:3542:pcp_log_dir=`eval echo $pcp_log_dir`
pcp-5.2.2/configure.ac:3543:pcp_log_dir=`eval echo $pcp_log_dir`
pcp-5.2.2/configure.ac-3544-AC_SUBST(pcp_log_dir)
##############################################
pcp-5.2.2/configure.ac-3562-fi])
pcp-5.2.2/configure.ac:3563:pcp_run_dir=`eval echo $pcp_run_dir`
pcp-5.2.2/configure.ac:3564:pcp_run_dir=`eval echo $pcp_run_dir`
pcp-5.2.2/configure.ac-3565-AC_SUBST(pcp_run_dir)
##############################################
pcp-5.2.2/configure.ac-3570- [pcp_tmpfile_dir=$localstatedir/tmp])
pcp-5.2.2/configure.ac:3571:pcp_tmpfile_dir=`eval echo $pcp_tmpfile_dir`
pcp-5.2.2/configure.ac:3572:pcp_tmpfile_dir=`eval echo $pcp_tmpfile_dir`
pcp-5.2.2/configure.ac-3573-AC_SUBST(pcp_tmpfile_dir)
##############################################
pcp-5.2.2/configure.ac-3575-dnl non-world-writeable status files directory
pcp-5.2.2/configure.ac:3576:pcp_tmp_dir=`eval echo $pcp_var_dir/tmp`
pcp-5.2.2/configure.ac-3577-AC_SUBST(pcp_tmp_dir)
##############################################
pcp-5.2.2/configure.ac-3582- [PACKAGE=pcp-${PACKAGE_VERSION}; pcp_doc_dir=$docdir])
pcp-5.2.2/configure.ac:3583:pcp_doc_dir=`eval echo $pcp_doc_dir`
pcp-5.2.2/configure.ac:3584:pcp_doc_dir=`eval echo $pcp_doc_dir`
pcp-5.2.2/configure.ac-3585-AC_SUBST(pcp_doc_dir)
##############################################
pcp-5.2.2/configure.ac-3910-dnl Capture special options passed to configure
pcp-5.2.2/configure.ac:3911:pcp_prefix=`eval echo $prefix`
pcp-5.2.2/configure.ac-3912-AC_SUBST(pcp_prefix)
##############################################
pcp-5.2.2/docs/PG/AboutPGGuide.rst-93- - **Meaning**
pcp-5.2.2/docs/PG/AboutPGGuide.rst:94: * - ``${PCP_VARIABLE}``
pcp-5.2.2/docs/PG/AboutPGGuide.rst:95: - A brace-enclosed all-capital-letters syntax indicates a variable that has been sourced from the global ``${PCP_DIR}/etc/pcp.conf`` file. These special variables indicate parameters that affect all PCP commands, and are likely to be different between platforms.
pcp-5.2.2/docs/PG/AboutPGGuide.rst-96- * - **command**
##############################################
pcp-5.2.2/docs/PG/InstrumentingApplications.rst-19-The chapter also includes information on how to use the MMV library (**libpcp_mmv**) for instrumenting an application. The example programs are installed in
pcp-5.2.2/docs/PG/InstrumentingApplications.rst:20:``${PCP_DEMOS_DIR}/mmv``.
pcp-5.2.2/docs/PG/InstrumentingApplications.rst-21-
##############################################
pcp-5.2.2/docs/PG/InstrumentingApplications.rst-25-This part of the chapter also includes information on how to use the Trace PMDA and its associated library (**libpcp_trace**) for instrumenting applications. The
pcp-5.2.2/docs/PG/InstrumentingApplications.rst:26:example programs are installed in ``${PCP_DEMOS_DIR}/trace``.
pcp-5.2.2/docs/PG/InstrumentingApplications.rst-27-
##############################################
pcp-5.2.2/docs/PG/InstrumentingApplications.rst-123-parameters of **pmdaInit(3)**, and are best explained using `Example 4.1. Memory Mapped Value Instance Structures`_ and `Example 4.2. Memory Mapped Value Metrics Structures`_.
pcp-5.2.2/docs/PG/InstrumentingApplications.rst:124:As mentioned earlier, the full source code for this example instrumented application can be found in ``${PCP_DEMOS_DIR}/mmv``.
pcp-5.2.2/docs/PG/InstrumentingApplications.rst-125-
##############################################
pcp-5.2.2/docs/PG/InstrumentingApplications.rst-306-
pcp-5.2.2/docs/PG/InstrumentingApplications.rst:307:At this stage, it will be informative to compile and run the complete example program, which can be found in ``${PCP_DEMOS_DIR}/mmv/acme.c``. There is an associated
pcp-5.2.2/docs/PG/InstrumentingApplications.rst-308-**Makefile** to build it, in the same directory. Running the **acme** binary creates the instrumentation shown in `Example 4.5. Memory Mapped Value Reports`_, with
##############################################
pcp-5.2.2/docs/PG/PMAPI.rst-1285-In the case where *type* is **PM_CONTEXT_LOCAL**, *name* is ignored, and the context uses a stand-alone connection to the PMDA methods used by PMCD. When this
pcp-5.2.2/docs/PG/PMAPI.rst:1286:type of context is in effect, the range of accessible performance metrics is constrained to DSO PMDAs listed in the **pmcd** configuration file ``${PCP_PMCDCONF_PATH}``.
pcp-5.2.2/docs/PG/PMAPI.rst:1287:The reason this is done, as opposed to all of the DSO PMDAs found below ``${PCP_PMDAS_DIR}`` for example, is that DSO PMDAs listed there are very likely to have
pcp-5.2.2/docs/PG/PMAPI.rst-1288-their metric names reflected in the local Name Space file, which will be loaded for this class of context.
##############################################
pcp-5.2.2/docs/PG/PMAPI.rst-2577-
pcp-5.2.2/docs/PG/PMAPI.rst:2578:The **pmprintf** function uses the **mkstemp** function to securely create a **pcp**-prefixed temporary file in ``${PCP_TMP_DIR}``. This temporary file is deleted
pcp-5.2.2/docs/PG/PMAPI.rst-2579-when **pmflush** is called.
##############################################
pcp-5.2.2/docs/PG/PMAPI.rst-2668-The source code for a sample client (**pmclient**) using the PMAPI is shipped as part of the PCP package. See the **pmclient(1)** man page, and the source code,
pcp-5.2.2/docs/PG/PMAPI.rst:2669:located in ``${PCP_DEMOS_DIR}/pmclient``.
pcp-5.2.2/docs/PG/PMAPI.rst-2670-
##############################################
pcp-5.2.2/docs/PG/ProgrammingPcp.rst-192-.. note::
pcp-5.2.2/docs/PG/ProgrammingPcp.rst:193: It is strongly recommended that code for a new PMDA be based on the source of one of the existing PMDAs below the ``${PCP_PMDAS_DIR}`` directory.
pcp-5.2.2/docs/PG/ProgrammingPcp.rst-194-
##############################################
pcp-5.2.2/docs/PG/ProgrammingPcp.rst-208-Functionally, this method may be thought of as a DSO implementation with a standard **main** routine conversion wrapper so that communication with PMCD uses
pcp-5.2.2/docs/PG/ProgrammingPcp.rst:209:message passing rather than direct procedure calls. For some very basic examples, see the ``${PCP_PMDAS_DIR}/trivial/trivial.c`` and ``${PCP_PMDAS_DIR}/simple/simple.c`` source files.
pcp-5.2.2/docs/PG/ProgrammingPcp.rst-210-
##############################################
pcp-5.2.2/docs/PG/ProgrammingPcp.rst-213-
pcp-5.2.2/docs/PG/ProgrammingPcp.rst:214:.. note:: Of particular interest for daemon PMDA writers, the ``${PCP_PMDAS_DIR}/simple`` PMDA has implementations in C, Perl and Python.
pcp-5.2.2/docs/PG/ProgrammingPcp.rst-215-
##############################################
pcp-5.2.2/docs/PG/WritingPMDA.rst-139-A PMDA that interacts with PMCD in this fashion must abide by a formal initialization protocol so that PMCD can discover the location of the library functions
pcp-5.2.2/docs/PG/WritingPMDA.rst:140:that are subsequently called with function pointers. When a DSO PMDA is installed, the PMCD configuration file, ``${PCP_PMCDCONF_PATH}``, is updated to reflect the
pcp-5.2.2/docs/PG/WritingPMDA.rst-141-domain and name of the PMDA, the location of the shared object, and the name of the initialization function. The initialization sequence is discussed in
##############################################
pcp-5.2.2/docs/PG/WritingPMDA.rst-164-
pcp-5.2.2/docs/PG/WritingPMDA.rst:165:As can be seen from the contents of ``${PCP_PMCDCONF_PATH}``, the DSO version of the simple PMDA is in a library named **pmda_simple.so** and has an initialization
pcp-5.2.2/docs/PG/WritingPMDA.rst-166-function called **simple_init**. The domain of the simple PMDA is 254, as shown in the column headed **Id**.
##############################################
pcp-5.2.2/docs/PG/WritingPMDA.rst-201-
pcp-5.2.2/docs/PG/WritingPMDA.rst:202:The specification for the simple PMDA now states the connection type of **pipe** to PMCD and the executable image for the PMDA is ``${PCP_PMDAS_DIR}/simple/pmdasimple``,
pcp-5.2.2/docs/PG/WritingPMDA.rst-203-using domain number 253.
##############################################
pcp-5.2.2/docs/PG/WritingPMDA.rst-233-
pcp-5.2.2/docs/PG/WritingPMDA.rst:234:The Cisco PMDA is an example of a caching PMDA. For additional information, see the contents of the ``${PCP_PMDAS_DIR}/cisco`` directory and the **pmdacisco(1)**
pcp-5.2.2/docs/PG/WritingPMDA.rst-235-man page.
##############################################
pcp-5.2.2/docs/PG/WritingPMDA.rst-241-
pcp-5.2.2/docs/PG/WritingPMDA.rst:242:The examples in this section are drawn from the trivial and simple PMDAs. Refer to the ``${PCP_PMDAS_DIR}/trivial`` and ``${PCP_PMDAS_DIR}/simple`` directories,
pcp-5.2.2/docs/PG/WritingPMDA.rst-243-respectively, where both binaries and source code are available.
##############################################
pcp-5.2.2/docs/PG/WritingPMDA.rst-291-
pcp-5.2.2/docs/PG/WritingPMDA.rst:292:The default domain number for each PMDA is defined in ``${PCP_VAR_DIR}/pmns/stdpmid``. This file is a simple table of PMDA names and their corresponding domain
pcp-5.2.2/docs/PG/WritingPMDA.rst-293-number. However, a PMDA does not have to use this domain number--the file is only a guide to help avoid domain number clashes when PMDAs are installed and
##############################################
pcp-5.2.2/docs/PG/WritingPMDA.rst-300-.. note::
pcp-5.2.2/docs/PG/WritingPMDA.rst:301: Although uniqueness of the domain number in the ``${PCP_PMCDCONF_PATH}`` control file used by PMCD is all that is required for successful starting of PMCD and
pcp-5.2.2/docs/PG/WritingPMDA.rst:302: the associated PMDAs, the developer of a new PMDA is encouraged to add the default domain number for each new PMDA to the ``${PCP_VAR_DIR}/pmns/stdpmid.local``
pcp-5.2.2/docs/PG/WritingPMDA.rst:303: file and then to run the **Make.stdpmid** script in ``${PCP_VAR_DIR}/pmns`` to recreate ``${PCP_VAR_DIR}/pmns/stdpmid``; this file acts as a repository for
pcp-5.2.2/docs/PG/WritingPMDA.rst-304- documenting the known default domain numbers.
##############################################
pcp-5.2.2/docs/PG/WritingPMDA.rst-881-Client processes will not be able to access the PMDA metrics if the PMNS file is not installed as part of the PMDA installation procedure on the collector host.
pcp-5.2.2/docs/PG/WritingPMDA.rst:882:The installed list of metric names and their corresponding PMIDs can be found in ``${PCP_VAR_DIR}/pmns/root``.
pcp-5.2.2/docs/PG/WritingPMDA.rst-883-
##############################################
pcp-5.2.2/docs/PG/WritingPMDA.rst-922-
pcp-5.2.2/docs/PG/WritingPMDA.rst:923:In this example, the **SIMPLE** macro is replaced by the domain number listed in ``${PCP_VAR_DIR}/pmns/stdpmid`` for the corresponding PMDA during installation
pcp-5.2.2/docs/PG/WritingPMDA.rst-924-(for the simple PMDA, this would normally be the value 253).
##############################################
pcp-5.2.2/docs/PG/WritingPMDA.rst-949-the expected run-time format using the **newhelp** command; see the **newhelp(1)** man page. Converted help text files are usually placed in the PMDA's directory
pcp-5.2.2/docs/PG/WritingPMDA.rst:950:below ``${PCP_PMDAS_DIR}`` as part of the PMDA installation procedure.
pcp-5.2.2/docs/PG/WritingPMDA.rst-951-
##############################################
pcp-5.2.2/docs/PG/WritingPMDA.rst-1751-The difficulty in using PMCD to test a daemon PMDA results from PMCD requiring timely replies from the PMDA in response to request PDUs. Although a timeout period
pcp-5.2.2/docs/PG/WritingPMDA.rst:1752:can be set in ``${PCP_PMCDOPTIONS_PATH}``, attaching a debugger (such as **gdb**) to the PMDA process might cause an already running PMCD to close its connection
pcp-5.2.2/docs/PG/WritingPMDA.rst-1753-with the PMDA. If timeouts are disabled, PMCD could wait forever to connect with the PMDA.
pcp-5.2.2/docs/PG/WritingPMDA.rst-1754-
pcp-5.2.2/docs/PG/WritingPMDA.rst:1755:If you suspect a PMDA has been terminated due to a timeout failure, check the PMCD log file, usually ``${PCP_LOG_DIR}/pmcd/pmcd.log``.
pcp-5.2.2/docs/PG/WritingPMDA.rst-1756-
##############################################
pcp-5.2.2/docs/PG/WritingPMDA.rst-1766-You can activate debugging options in PMCD and most other PCP tools with the **-D** command-line option. Supported options can be listed with the **pmdbg**
pcp-5.2.2/docs/PG/WritingPMDA.rst:1767:command; see the **pmdbg(1)** man page. Setting the debug options for PMCD in ``${PCP_PMCDOPTIONS_PATH}`` might generate too much information to be useful,
pcp-5.2.2/docs/PG/WritingPMDA.rst-1768-especially if there are other clients and PMDAs connected to the PMCD process.
##############################################
pcp-5.2.2/docs/PG/WritingPMDA.rst-1819-
pcp-5.2.2/docs/PG/WritingPMDA.rst:1820:The PMDA typically would have its own directory below ``${PCP_PMDAS_DIR}`` into which several files would be installed. In the description in Section 2.8.1,
pcp-5.2.2/docs/PG/WritingPMDA.rst:1821:“`Installing a PMDA`_”, the PMDA of interest is assumed to be known by the name **newbie**, hence the PMDA directory would be ``${PCP_PMDAS_DIR}/newbie``.
pcp-5.2.2/docs/PG/WritingPMDA.rst-1822-
##############################################
pcp-5.2.2/docs/PG/WritingPMDA.rst-1831-
pcp-5.2.2/docs/PG/WritingPMDA.rst:1832:* Help text has been installed in a place where the PMDA can find it, usually in the PMDA directory ``${PCP_PMDAS_DIR}/newbie``.
pcp-5.2.2/docs/PG/WritingPMDA.rst-1833-
pcp-5.2.2/docs/PG/WritingPMDA.rst:1834:* The name space has been updated in the ``${PCP_VAR_DIR}/pmns`` directory.
pcp-5.2.2/docs/PG/WritingPMDA.rst-1835-
pcp-5.2.2/docs/PG/WritingPMDA.rst:1836:* The PMDA binary has been installed, usually in the directory ``${PCP_PMDAS_DIR}/newbie``.
pcp-5.2.2/docs/PG/WritingPMDA.rst-1837-
pcp-5.2.2/docs/PG/WritingPMDA.rst:1838:* The ``${PCP_PMCDCONF_PATH}`` file has been updated.
pcp-5.2.2/docs/PG/WritingPMDA.rst-1839-
##############################################
pcp-5.2.2/docs/PG/WritingPMDA.rst-1844-
pcp-5.2.2/docs/PG/WritingPMDA.rst:1845:You may wish to use ``${PCP_PMDAS_DIR}/simple/Makefile`` as a template for constructing a new PMDA **Makefile**; changing the assignment of **IAM** from **simple**
pcp-5.2.2/docs/PG/WritingPMDA.rst-1846-to **newbie** would account for most of the required changes.
pcp-5.2.2/docs/PG/WritingPMDA.rst-1847-
pcp-5.2.2/docs/PG/WritingPMDA.rst:1848:The **Install** script should make use of the generic procedures defined in the script ``${PCP_SHARE_DIR}/lib/pmdaproc.sh``, and may be as straightforward as the
pcp-5.2.2/docs/PG/WritingPMDA.rst-1849-one used for the trivial PMDA, shown in `Example 2.37. Install Script for the Trivial PMDA`_:
##############################################
pcp-5.2.2/docs/PG/WritingPMDA.rst-1865-The variables, shown in `Table 2.1. Variables to Control Behavior of Generic pmdaproc.sh Procedures`_, may be assigned values to modify the behavior of the
pcp-5.2.2/docs/PG/WritingPMDA.rst:1866:**pmdaSetup** and **pmdainstall** procedures from ``${PCP_SHARE_DIR}/lib/pmdaproc.sh``.
pcp-5.2.2/docs/PG/WritingPMDA.rst-1867-
##############################################
pcp-5.2.2/docs/PG/WritingPMDA.rst-1949-
pcp-5.2.2/docs/PG/WritingPMDA.rst:1950:* Copy the ``$pmns_source`` file, replacing symbolic references to **SYMDOM** by the desired numeric domain number from **domain**.
pcp-5.2.2/docs/PG/WritingPMDA.rst-1951-
##############################################
pcp-5.2.2/docs/PG/WritingPMDA.rst-1953-
pcp-5.2.2/docs/PG/WritingPMDA.rst:1954:* If any **pmchart** views can be found (files with names ending in “.pmchart”), copy these to the standard directory (``${PCP_VAR_DIR}/config/pmchart``) with the ".pmchart" suffix removed.
pcp-5.2.2/docs/PG/WritingPMDA.rst-1955-
pcp-5.2.2/docs/PG/WritingPMDA.rst:1956:* Create new help files from ``$help_source`` after replacing symbolic references to **SYMDOM** by the desired numeric domain number from **domain**.
pcp-5.2.2/docs/PG/WritingPMDA.rst-1957-
##############################################
pcp-5.2.2/docs/PG/WritingPMDA.rst-1961-
pcp-5.2.2/docs/PG/WritingPMDA.rst:1962:* Add the PMDA specification to PMCD's configuration file (``${PCP_PMCDCONF_PATH}``).
pcp-5.2.2/docs/PG/WritingPMDA.rst-1963-
##############################################
pcp-5.2.2/docs/PG/WritingPMDA.rst-1976-
pcp-5.2.2/docs/PG/WritingPMDA.rst:1977:The files ``${PCP_PMDAS_DIR}/*/Install`` provide a wealth of examples that may be used to construct a new PMDA **Install** script.
pcp-5.2.2/docs/PG/WritingPMDA.rst-1978-
##############################################
pcp-5.2.2/docs/PG/WritingPMDA.rst-1981-
pcp-5.2.2/docs/PG/WritingPMDA.rst:1982:The simplest way to stop a PMDA from running, apart from killing the process, is to remove the entry from ``${PCP_PMCDCONF_PATH}`` and signal PMCD (with **SIGHUP**) to reread its
pcp-5.2.2/docs/PG/WritingPMDA.rst-1983-configuration file. To completely remove a PMDA requires the reverse process of the installation, including an update of the Performance Metrics Name Space (PMNS).
##############################################
pcp-5.2.2/docs/PG/WritingPMDA.rst-1986-
pcp-5.2.2/docs/PG/WritingPMDA.rst:1987:The ``${PCP_PMDAS_DIR}/*/Remove`` files provide a wealth of examples that may be used to construct a new PMDA **Remove** script.
pcp-5.2.2/docs/PG/WritingPMDA.rst-1988-
##############################################
pcp-5.2.2/docs/UAG/AboutUAGGuide.rst-97- - **Meaning**
pcp-5.2.2/docs/UAG/AboutUAGGuide.rst:98: * - ``${PCP_VARIABLE}``
pcp-5.2.2/docs/UAG/AboutUAGGuide.rst:99: - A brace-enclosed all-capital-letters syntax indicates a variable that has been sourced from the global ``${PCP_DIR}/etc/pcp.conf`` file. These special variables indicate parameters that affect all PCP commands, and are likely to be different between platforms.
pcp-5.2.2/docs/UAG/AboutUAGGuide.rst-100- * - **command**
##############################################
pcp-5.2.2/docs/UAG/ArchiveLogging.rst-127-
pcp-5.2.2/docs/UAG/ArchiveLogging.rst:128:The configuration files used by these scripts can be edited to suit your particular needs, and are generally controlled by the ``${PCP_PMLOGGERCONTROL_PATH}``
pcp-5.2.2/docs/UAG/ArchiveLogging.rst:129:and ``${PCP_PMLOGGERCONTROL_PATH}.d`` files (**pmsnap** has an additional control file, ``${PCP_PMSNAPCONTROL_PATH}``). Complete information on these scripts is
pcp-5.2.2/docs/UAG/ArchiveLogging.rst-130-available in the **pmlogger_daily(1)** and **pmsnap(1)** man pages.
##############################################
pcp-5.2.2/docs/UAG/ArchiveLogging.rst-206-
pcp-5.2.2/docs/UAG/ArchiveLogging.rst:207:The specification of where to place the archive log files for particular **pmlogger** instances is encoded in the ``${PCP_PMLOGGERCONTROL_PATH}`` and
pcp-5.2.2/docs/UAG/ArchiveLogging.rst:208:``${PCP_PMLOGGERCONTROL_PATH}.d`` configuration files, and these files should be customized on each host running an instance of **pmlogger**.
pcp-5.2.2/docs/UAG/ArchiveLogging.rst-209-
##############################################
pcp-5.2.2/docs/UAG/ArchiveLogging.rst-234-
pcp-5.2.2/docs/UAG/ArchiveLogging.rst:235:``pmdumplog -l ${PCP_LOG_DIR}/pmlogger/www.sgi.com/19960731``
pcp-5.2.2/docs/UAG/ArchiveLogging.rst-236-
##############################################
pcp-5.2.2/docs/UAG/ArchiveLogging.rst-371- Do nothing - a default configuration will be created in the following step, using **pmlogconf(1)** probing and automatic file generation based on the metrics
pcp-5.2.2/docs/UAG/ArchiveLogging.rst:372: available at the remote host. The ``${PCP_RC_DIR}/pmlogger`` start script handles this.
pcp-5.2.2/docs/UAG/ArchiveLogging.rst-373-
##############################################
pcp-5.2.2/docs/UAG/ArchiveLogging.rst-375-
pcp-5.2.2/docs/UAG/ArchiveLogging.rst:376:2. Edit ``${PCP_PMLOGGERCONTROL_PATH}``, or one of the ``${PCP_PMLOGGERCONTROL_PATH}.d`` files. Using the line for **remote** as a template, add the following line::
pcp-5.2.2/docs/UAG/ArchiveLogging.rst-377-
##############################################
pcp-5.2.2/docs/UAG/ArchiveLogging.rst-429-
pcp-5.2.2/docs/UAG/ArchiveLogging.rst:430:2. Edit ``${HOME}/crontab.txt``, adding lines similar to those from the sample ``${PCP_VAR_DIR}/config/pmlogger/crontab`` file for **pmlogger_daily** and **pmlogger_check**;
pcp-5.2.2/docs/UAG/ArchiveLogging.rst-431- for example::
##############################################
pcp-5.2.2/docs/UAG/ArchiveLogging.rst-453-The automated archive log management services also create an archive folio named **Latest** for each managed **pmlogger** instance, to provide a symbolic name to the
pcp-5.2.2/docs/UAG/ArchiveLogging.rst:454:most recent archive log. With reference to `Figure 6.1. Archive Log Directory Structure`_, this would mean the creation of the folios ``${PCP_LOG_DIR}/pmlogger/one/Latest``
pcp-5.2.2/docs/UAG/ArchiveLogging.rst:455:and ``${PCP_LOG_DIR}/pmlogger/two/Latest``.
pcp-5.2.2/docs/UAG/ArchiveLogging.rst-456-
##############################################
pcp-5.2.2/docs/UAG/ArchiveLogging.rst-516-
pcp-5.2.2/docs/UAG/ArchiveLogging.rst:517:The primary logger launches the next time the ``${PCP_RC_DIR}/pmlogger`` **start** script runs. If you wish this to happen immediately, follow up with this command::
pcp-5.2.2/docs/UAG/ArchiveLogging.rst-518-
##############################################
pcp-5.2.2/docs/UAG/ArchiveLogging.rst-520-
pcp-5.2.2/docs/UAG/ArchiveLogging.rst:521:When it is started in this fashion, the ``${PCP_PMLOGGERCONTROL_PATH}`` file (or one of the ``${PCP_PMLOGGERCONTROL_PATH}.d`` files) must use the second field of one
pcp-5.2.2/docs/UAG/ArchiveLogging.rst:522:configuration line to designate the primary logger, and usually will also use the **pmlogger** configuration file ``${PCP_SYSCONF_DIR}/pmlogger/config.default``
pcp-5.2.2/docs/UAG/ArchiveLogging.rst-523-(although the latter is not mandatory).
##############################################
pcp-5.2.2/docs/UAG/ArchiveLogging.rst-672-
pcp-5.2.2/docs/UAG/ArchiveLogging.rst:673:The control files are kept in ``${PCP_TMP_DIR}/pmlogger``. A control file with the process ID of the **pmlogger** as its name is created when the **pmlogger** is started.
pcp-5.2.2/docs/UAG/ArchiveLogging.rst-674-In addition, the primary **pmlogger** creates a symbolic link named **primary** to its control file.
##############################################
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst-88-
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst:89:``${PCP_DIR}/etc/pcp.env``
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst-90-
##############################################
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst-92-
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst:93:``${PCP_DIR}/etc/pcp.conf``
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst-94-
##############################################
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst-96-
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst:97:``${PCP_PMCDCONF_PATH}``
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst-98-
##############################################
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst-100-
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst:101:``${PCP_BINADM_DIR}/pmcd``
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst-102-
##############################################
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst-104-
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst:105:``${PCP_PMCDOPTIONS_PATH}``
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst-106-
##############################################
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst-108-
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst:109:``${PCP_RC_DIR}/pmcd``
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst-110-
##############################################
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst-112-
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst:113:``${PCP_BIN_DIR}/pcptool``
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst-114-
##############################################
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst-116-
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst:117:``${PCP_SHARE_DIR}``
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst-118-
##############################################
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst-120-
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst:121:``${PCP_VAR_DIR}``
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst-122-
##############################################
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst-124-
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst:125:``${PCP_BINADM_DIR}/pcptool``
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst-126-
##############################################
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst-128-
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst:129:``${PCP_SHARE_DIR}/lib/pcplib``
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst-130-
##############################################
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst-132-
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst:133:``${PCP_PMDAS_DIR}``
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst-134-
##############################################
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst-136-
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst:137:``${PCP_VAR_DIR}/config``
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst-138-
##############################################
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst-140-
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst:141:``${PCP_DEMOS_DIR}``
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst-142-
##############################################
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst-144-
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst:145:``${PCP_LOG_DIR}``
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst-146-
##############################################
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst-148-
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst:149:``${PCP_VAR_DIR}/pmns``
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst-150-
##############################################
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst-160-Collection Daemon (PMCD) or by means of PMNS data in a PCP archive log. The distributed PMNS is the default, but alternates may be specified using the **-n**
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst:161:*namespace* argument to the PCP tools. When a PMNS is maintained on a host, it is likely to reside in the ``${PCP_VAR_DIR}/pmns`` directory.
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst-162-
##############################################
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst-281-When you are using PCP tools and utilities and are calling PCP library functions, a standard set of defined environment variables are available in the
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst:282:``${PCP_DIR}/etc/pcp.conf`` file. These variables are generally used to specify the location of various PCP pieces in the file system and may be loaded
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst:283:into shell scripts by sourcing the ``${PCP_DIR}/etc/pcp.env`` shell script. They may also be queried by C, C++, perl and python programs using the
pcp-5.2.2/docs/UAG/CommonConventionsAndArguments.rst-284-**pmGetConfig** library function. If a variable is already defined in the environment, the values in the **pcp.conf** file do not override those values;
##############################################
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst-47-
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst:48:The summary PMDA resides in the ``${PCP_PMDAS_DIR}/summary`` directory and may be installed with a default configuration by following the steps described in
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst-49-Section 2.3.1, “:ref:`PMDA Installation on a PCP Collector Host`”.
##############################################
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst-56-
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst:57:1. Check that the symbolic constant **SYSSUMMARY** is defined in the ``${PCP_VAR_DIR}/pmns/stdpmid`` file. If it is not, perform the postinstall update of this file, as superuser::
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst-58-
##############################################
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst-63-
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst:64:3. Edit the **pmns** file in the ``${PCP_PMDAS_DIR}/summary`` directory to add the new metric names in the format described in the **pmns(5)** man page. You must choose
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst-65- a unique performance metric identifier (PMID) for each metric. In the **pmns** file, these appear as **SYSSUMMARY:0:x**. The value of x is arbitrary in the range 0
##############################################
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst-93-
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst:94:5. Edit the ``${PCP_PMDAS_DIR}/summary/expr.pmie`` file to add new **pmie** expressions. If the name to the left of the assignment operator (=) is one of the PMNS
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst-95- names, then the **pmie** expression to the right will be evaluated and returned by the summary PMDA. The expression must return a numeric value. Additional
##############################################
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst-127-
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst:128: From the ``${PCP_PMDAS_DIR}/summary`` directory, use this command::
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst-129-
##############################################
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst-195-
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst:196:``${PCP_SYSCONF_DIR}/pmlogger``
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst-197-
##############################################
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst-201-
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst:202:``${PCP_SYSCONF_DIR}/pmlogger/config.default``
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst-203-
##############################################
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst-205-
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst:206:``${PCP_VAR_DIR}/config/pmlogconf/tools``
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst-207-
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst-208-Every PCP tool with a fixed group of performance metrics contributes a **pmlogconf** configuration file that includes each of the performance metrics used in the tool,
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst:209:for example, ``${PCP_VAR_DIR}/config/pmlogconf/pmstat`` for **pmstat**.
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst-210-
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst:211:``${PCP_PMLOGGERCONTROL_PATH}`` or ``${PCP_PMLOGGERCONTROL_PATH}.d`` files
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst-212-
##############################################
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst-217-
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst:218:``/etc/cron.d/pcp-pmlogger`` or ``${PCP_VAR_DIR}/config/pmlogger/crontab``
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst-219-
##############################################
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst-222-
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst:223:``${PCP_LOG_DIR}/pmlogger/somehost``
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst-224-
##############################################
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst-226-
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst:227:``${PCP_LOG_DIR}/pmlogger/somehost/Latest``
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst-228-
##############################################
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst-238-
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst:239:``${PCP_SYSCONF_DIR}/pmie``
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst-240-
##############################################
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst-246-
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst:247:``${PCP_SYSCONF_DIR}/pmie/config.default``
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst-248-
##############################################
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst-251-
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst:252:``${PCP_PMIECONTROL_PATH}`` and ``${PCP_PMIECONTROL_PATH}.d`` files
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst-253-
##############################################
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst-258-
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst:259:``${PCP_VAR_DIR}/config/pmieconf/*/*``
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst-260-
##############################################
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst-262-
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst:263:``/etc/cron.d/pcp-pmie`` or ``${PCP_VAR_DIR}/config/pmie/crontab``
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst-264-
##############################################
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst-267-
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst:268:``${PCP_LOG_DIR}/pmie/somehost``
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst-269-
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst:270:The default behavior of the ``${PCP_RC_DIR}/pmie`` startup scripts create **pmie** log files for the host *somehost* in this directory.
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst-271-
##############################################
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst-275-
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst:276:``${PCP_TMP_DIR}/pmie``
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst-277-
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst:278:The statistics that **pmie** gathers are maintained in binary data structure files. These files can be found in the ``${PCP_TMP_DIR}/pmie`` directory.
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst-279-
##############################################
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst-305-
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst:306:When **pmcpp(1)** is executed, the standard include directories are the current directory and ``${PCP_VAR_DIR}/pmns``, where some standard macros and default
pcp-5.2.2/docs/UAG/CustomizingAndExtendingPcpServices.rst-307-specifications may be found.
##############################################
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst-59-Sometimes, if a daemon is not responding on a PCP collection system, the problem can be resolved by stopping and then immediately restarting a fresh instance of the daemon. If
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst:60:you need to stop and then immediately restart PMCD on a PCP collection system, use the **start** argument provided with the script in ``${PCP_RC_DIR}``. The command syntax is, as follows::
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst-61-
##############################################
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst-63-
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst:64:On startup, **pmcd** looks for a configuration file at ``${PCP_PMCDCONF_PATH}``. This file specifies which agents cover which performance metrics domains and how PMCD should make
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst-65-contact with the agents. A comprehensive description of the configuration file syntax and semantics can be found in the **pmcd(1)** man page.
##############################################
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst-77-
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst:78:If there is a problem with **pmcd**, the first place to investigate should be the **pmcd.log** file. By default, this file is in the ``${PCP_LOG_DIR}/pmcd`` directory.
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst-79-
##############################################
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst-82-
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst:83:There are two files that control PMCD operation. These are the ``${PCP_PMCDCONF_PATH}`` and ``${PCP_PMCDOPTIONS_PATH}`` files. The **pmcd.options** file contains the command line
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst:84:options used with PMCD; it is read when the daemon is invoked by ``${PCP_RC_DIR}/pmcd``. The **pmcd.conf** file contains configuration information regarding domain agents and the
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst-85-metrics that they monitor. These configuration files are described in the following sections.
##############################################
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst-89-
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst:90:Command line options for the PMCD are stored in the ``${PCP_PMCDOPTIONS_PATH}`` file. The PMCD can be invoked directly from a shell prompt, or it can be invoked by ``${PCP_RC_DIR}/pmcd``
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst:91:as part of the boot process. It is usual and normal to invoke it using ``${PCP_RC_DIR}/pmcd``, reserving shell invocation for debugging purposes.
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst-92-
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst:93:The PMCD accepts certain command line options to control its execution, and these options are placed in the **pmcd.options** file when ``${PCP_RC_DIR}/pmcd`` is being used to start the
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst-94-daemon. The following options (amongst others) are available:
##############################################
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst-102-
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst:103:Specifies a log file. If no **-l** option is specified, the log file name is **pmcd.log** and it is created in the directory ``${PCP_LOG_DIR}/pmcd/``.
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst-104-
##############################################
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst-106-
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst:107:Specifies the path to a local unix domain socket (for platforms supporting this socket family only). The default value is ``${PCP_RUN_DIR}/pmcd.socket``.
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst-108-
##############################################
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst-160-
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst:161:When the PMCD is invoked, it reads its configuration file, which is ``${PCP_PMCDCONF_PATH}``. This file contains entries that specify the PMDAs used by this instance of the PMCD and
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst-162-which metrics are covered by these PMDAs. Also, you may specify access control rules in this file for the various hosts, users and groups on your network. This file is described
##############################################
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst-322-
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst:323:For example, here is a sample access control portion of a ``${PCP_PMCDCONF_PATH}`` file:
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst-324-
##############################################
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst-343-
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst:344:Each PMDA has its own directory located below ``${PCP_PMDAS_DIR}``. Each directory contains a **Remove** script to unconfigure the PMDA, remove the associated metrics from the PMNS,
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst-345-and restart the **pmcd** daemon; and an **Install** script to install the PMDA, update the PMNS, and restart the PMCD daemon.
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst-346-
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst:347:As a shortcut mechanism to support automated PMDA installation, a file named **.NeedInstall** can be created in a PMDA directory below ``${PCP_PMDAS_DIR}``. The next restart of PCP
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst-348-services will invoke that PMDAs installation automatically, with default options taken.
##############################################
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst-367-
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst:368:Check that there is no conflict in the PMDs as defined in ``${PCP_VAR_DIR}/pmns/stdpmid`` and the other PMDAs currently in use (listed in ``${PCP_PMCDCONF_PATH}``). Edit **domain.h**
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst-369-to assign the new domain number if there is a conflict (this is highly unlikely to occur in a regular PCP installation).
##############################################
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst-459-The PMNS at the collector host is updated whenever a PMDA is installed or removed, and may also be updated when new versions of PCP are installed. During these operations,
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst:460:the PMNS is typically updated by merging the (plaintext) namespace components from each installed PMDA. These separate PMNS components reside in the ``${PCP_VAR_DIR}/pmns``
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst-461-directory and are merged into the **root** file there.
##############################################
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst-543-
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst:544:This setting is controlled from the **PMCD_LOCAL** environment variable usually set via ``${PCP_SYSCONFIG_DIR}/pmcd``.
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst-545-
##############################################
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst-558-
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst:559:If there is a syntax error in ``${PCP_PMCDCONF_PATH}``, PMCD does not use the contents of the file. This can lead to situations in which the configuration file and PMCD's internal
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst-560-state do not agree.
##############################################
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst-574-
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst:575:If the following messages appear in the PMCD log (``${PCP_LOG_DIR}/pmcd/pmcd.log``), consider the cause and resolution::
pcp-5.2.2/docs/UAG/InstallingAndConfiguringPcp.rst-576-
##############################################
pcp-5.2.2/docs/UAG/MonitoringSystemPerformance.rst-426-
pcp-5.2.2/docs/UAG/MonitoringSystemPerformance.rst:427:The following example illustrates the use of **pmstore** to enable performance metrics collection in the **txmon** PMDA (see ``${PCP_PMDAS_DIR}/txmon``
pcp-5.2.2/docs/UAG/MonitoringSystemPerformance.rst-428-for the source code of the txmon PMDA). When the metric **txmon.control.level** has the value 0, no performance metrics are collected.
##############################################
pcp-5.2.2/docs/UAG/PerformanceMetricsInferenceEngine.rst-58- * Post an entry to the system log file; see the **syslog(3)** man page.
pcp-5.2.2/docs/UAG/PerformanceMetricsInferenceEngine.rst:59: * Post an entry to the PCP noticeboard file ``${PCP_LOG_DIR}/NOTICES``; see the **pmpost(1)** man page.
pcp-5.2.2/docs/UAG/PerformanceMetricsInferenceEngine.rst-60- * Execute a shell command or script, for example, to send e-mail, initiate a pager call, warn the help desk, and so on.
##############################################
pcp-5.2.2/docs/UAG/PerformanceMetricsInferenceEngine.rst-1039-
pcp-5.2.2/docs/UAG/PerformanceMetricsInferenceEngine.rst:1040:The first input form is a generalized **pmie** rule file such as those found below ``${PCP_VAR_DIR}/config/pmieconf``. These files contain the generalized rules
pcp-5.2.2/docs/UAG/PerformanceMetricsInferenceEngine.rst-1041-which **pmieconf** is able to manipulate. Each of the rules can be enabled or disabled, or the individual variables associated with each rule can be edited.
##############################################
pcp-5.2.2/docs/UAG/PerformanceMetricsInferenceEngine.rst-1137-
pcp-5.2.2/docs/UAG/PerformanceMetricsInferenceEngine.rst:1138:3. Run **pmie** with the new configuration file. Use a text editor to view the newly generated **pmie** configuration file (``${PCP_SYSCONF_DIR}/pmie/config.demo``),
pcp-5.2.2/docs/UAG/PerformanceMetricsInferenceEngine.rst-1139- and then run the command::
##############################################
pcp-5.2.2/docs/UAG/PerformanceMetricsInferenceEngine.rst-1178-
pcp-5.2.2/docs/UAG/PerformanceMetricsInferenceEngine.rst:1179:1. Use a text editor (as superuser) to edit the ``pmie${PCP_PMIECONTROL_PATH}`` and ``${PCP_PMIECONTROL_PATH}.d`` control files. Notice the default entry, which looks like this:
pcp-5.2.2/docs/UAG/PerformanceMetricsInferenceEngine.rst-1180-
##############################################
pcp-5.2.2/docs/UAG/PerformanceMetricsInferenceEngine.rst-1194- .. note::
pcp-5.2.2/docs/UAG/PerformanceMetricsInferenceEngine.rst:1195: Without an absolute path, the configuration file (**-c** above) will be resolved using ``${PCP_SYSCONF_DIR}/pmie`` - if **config.demo** was created in
pcp-5.2.2/docs/UAG/PerformanceMetricsInferenceEngine.rst-1196- `Procedure 5.2. Modify pmieconf Rules and Generate a pmie File`_ it would be used here for host **venus**, otherwise a new configuration file will be generated
pcp-5.2.2/docs/UAG/PerformanceMetricsInferenceEngine.rst:1197: using the default rules (at ``${PCP_SYSCONF_DIR}/pmie/config.demo``).
pcp-5.2.2/docs/UAG/PerformanceMetricsInferenceEngine.rst-1198-
##############################################
pcp-5.2.2/docs/UAG/PerformanceMetricsInferenceEngine.rst-1244-
pcp-5.2.2/docs/UAG/PerformanceMetricsInferenceEngine.rst:1245:2. Edit ``${HOME}/crontab.txt``, adding lines similar to those from the sample ``${PCP_VAR_DIR}/config/pmie/crontab`` file for **pmie_daily** and **pmie_check**;
pcp-5.2.2/docs/UAG/PerformanceMetricsInferenceEngine.rst-1246- for example:
##############################################
pcp-5.2.2/docs/UAG/PerformanceMetricsInferenceEngine.rst-1265-
pcp-5.2.2/docs/UAG/PerformanceMetricsInferenceEngine.rst:1266:``${PCP_DEMOS_DIR}/pmie/*``
pcp-5.2.2/docs/UAG/PerformanceMetricsInferenceEngine.rst-1267-
##############################################
pcp-5.2.2/docs/UAG/PerformanceMetricsInferenceEngine.rst-1269-
pcp-5.2.2/docs/UAG/PerformanceMetricsInferenceEngine.rst:1270:``${PCP_SYSCONF_DIR}/pmie/config.default``
pcp-5.2.2/docs/UAG/PerformanceMetricsInferenceEngine.rst-1271-
##############################################
pcp-5.2.2/docs/UAG/PerformanceMetricsInferenceEngine.rst-1273-
pcp-5.2.2/docs/UAG/PerformanceMetricsInferenceEngine.rst:1274:``${PCP_VAR_DIR}/config/pmieconf/*/*``
pcp-5.2.2/docs/UAG/PerformanceMetricsInferenceEngine.rst-1275-
##############################################
pcp-5.2.2/docs/UAG/PerformanceMetricsInferenceEngine.rst-1277-
pcp-5.2.2/docs/UAG/PerformanceMetricsInferenceEngine.rst:1278:``${PCP_PMIECONTROL_PATH} and ${PCP_PMIECONTROL_PATH}.d`` files
pcp-5.2.2/docs/UAG/PerformanceMetricsInferenceEngine.rst-1279-
##############################################
pcp-5.2.2/docs/UAG/PerformanceMetricsInferenceEngine.rst-1282-
pcp-5.2.2/docs/UAG/PerformanceMetricsInferenceEngine.rst:1283:``${PCP_VAR_DIR}/config/pmlogger/crontab``
pcp-5.2.2/docs/UAG/PerformanceMetricsInferenceEngine.rst-1284-
##############################################
pcp-5.2.2/docs/UAG/PerformanceMetricsInferenceEngine.rst-1287-
pcp-5.2.2/docs/UAG/PerformanceMetricsInferenceEngine.rst:1288:``${PCP_LOG_DIR}/pmie/*``
pcp-5.2.2/docs/UAG/PerformanceMetricsInferenceEngine.rst-1289-
pcp-5.2.2/docs/UAG/PerformanceMetricsInferenceEngine.rst:1290:Contains the **pmie** log files for the host. These files are created by the default behavior of the ``${PCP_RC_DIR}/pmie`` startup scripts.
pcp-5.2.2/docs/UAG/PerformanceMetricsInferenceEngine.rst-1291-
##############################################
pcp-5.2.2/docs/UAG/PerformanceMetricsInferenceEngine.rst-1300-
pcp-5.2.2/docs/UAG/PerformanceMetricsInferenceEngine.rst:1301:``${PCP_RC_DIR}/pmie``
pcp-5.2.2/docs/UAG/PerformanceMetricsInferenceEngine.rst-1302-
##############################################
pcp-5.2.2/docs/UAG/PerformanceMetricsInferenceEngine.rst-1304-
pcp-5.2.2/docs/UAG/PerformanceMetricsInferenceEngine.rst:1305:``${PCP_TMP_DIR}/pmie``
pcp-5.2.2/docs/UAG/PerformanceMetricsInferenceEngine.rst-1306-
##############################################
pcp-5.2.2/install-sh-99- $RM -f "$__symlink"
pcp-5.2.2/install-sh:100: __dir=`dirname "$__symlink" | sed -e 's;//*;/;g'`
pcp-5.2.2/install-sh-101- [ ! -d "$__dir" ] && mkdir -p "$__dir"
pcp-5.2.2/install-sh-102-
pcp-5.2.2/install-sh:103: __rel=`echo "$__target" | sed -e 's;^/;;'` # remove leading slash
pcp-5.2.2/install-sh-104- if [ "$__rel" = "$__target" ]
##############################################
pcp-5.2.2/install-sh-107- status=$?
pcp-5.2.2/install-sh:108: $MANIFEST l "$__target" `echo "$__symlink" | sed -e "s;^$DIST_ROOT;;"`
pcp-5.2.2/install-sh-109- else
pcp-5.2.2/install-sh:110: __dlist=`dirname "$__symlink" | sed -e "s;^$DIST_ROOT;;" -e 's;/; ;g'`
pcp-5.2.2/install-sh-111- __tpath=""
##############################################
pcp-5.2.2/install-sh-119- cd "$HERE"
pcp-5.2.2/install-sh:120: $MANIFEST l "${__tpath}${__rel}" `echo "$__symlink" | sed -e "s;^$DIST_ROOT;;"`
pcp-5.2.2/install-sh-121- fi
##############################################
pcp-5.2.2/install-sh-125-{
pcp-5.2.2/install-sh:126: __target=`echo "$1" | sed -e "s;^$DIST_ROOT;;" -e 's;//*;/;g'`
pcp-5.2.2/install-sh:127: __symlink=`echo "$2" | sed -e "s;^$DIST_ROOT;;" -e 's;//*;/;g'`
pcp-5.2.2/install-sh-128-
pcp-5.2.2/install-sh:129: __rel=`echo "$__symlink" | sed -e 's;^/;;'` # remove leading slash
pcp-5.2.2/install-sh:130: __dlist=`dirname "$__target" | sed -e 's;/; ;g'`
pcp-5.2.2/install-sh-131- __tpath=""
##############################################
pcp-5.2.2/install-sh-140-{
pcp-5.2.2/install-sh:141: __target=`echo "$1" | sed -e "s;^$DIST_ROOT;;"`
pcp-5.2.2/install-sh-142-
##############################################
pcp-5.2.2/install-sh-159-
pcp-5.2.2/install-sh:160:prog=`basename $0`
pcp-5.2.2/install-sh-161-HERE=`pwd`
##############################################
pcp-5.2.2/install-sh-166-FILEMODE=644
pcp-5.2.2/install-sh:167:OWNER=`$ID -u 2>/dev/null`
pcp-5.2.2/install-sh:168:GROUP=`$ID -g 2>/dev/null`
pcp-5.2.2/install-sh-169-if [ -z "$OWNER" -o -z "$GROUP" ]
##############################################
pcp-5.2.2/install-sh-172- #
pcp-5.2.2/install-sh:173: OWNER=`$ID | sed -e 's/.*uid=[^(]*(//' -e 's/).*//'`
pcp-5.2.2/install-sh:174: GROUP=`$ID | sed -e 's/.*gid=[^(]*(//' -e 's/).*//'`
pcp-5.2.2/install-sh-175-fi
##############################################
pcp-5.2.2/install-sh-203- d)
pcp-5.2.2/install-sh:204: dir=`echo "$DIST_ROOT/$OPTARG" | sed -e 's;//*;/;g'`
pcp-5.2.2/install-sh-205- dflag=true
##############################################
pcp-5.2.2/install-sh-213- m)
pcp-5.2.2/install-sh:214: DIRMODE=`expr $OPTARG`
pcp-5.2.2/install-sh-215- FILEMODE=$DIRMODE
##############################################
pcp-5.2.2/install-sh-224- t)
pcp-5.2.2/install-sh:225: tmpfile=`echo "$DIST_ROOT/$OPTARG" | sed -e 's;//*;/;g'`
pcp-5.2.2/install-sh-226- tflag=true
##############################################
pcp-5.2.2/install-sh-233-
pcp-5.2.2/install-sh:234:shift `expr $OPTIND - 1`
pcp-5.2.2/install-sh-235-
##############################################
pcp-5.2.2/install-sh-254- fi
pcp-5.2.2/install-sh:255: $MANIFEST d $DIRMODE $OWNER $GROUP `echo "$dir" | sed -e "s;^$DIST_ROOT;;"`
pcp-5.2.2/install-sh-256-elif $Sflag
##############################################
pcp-5.2.2/install-sh-264- else
pcp-5.2.2/install-sh:265: target=`echo "$DIST_ROOT/$1" | sed -e 's;//*;/;g'`
pcp-5.2.2/install-sh-266- fi
##############################################
pcp-5.2.2/install-sh-279- f="$1"
pcp-5.2.2/install-sh:280: dir="$DIST_ROOT"/`dirname "$2"`
pcp-5.2.2/install-sh:281: dir=`echo "$dir" | sed -e 's;//*;/;g'`
pcp-5.2.2/install-sh:282: t_dir=`echo "$dir" | sed -e "s;^$DIST_ROOT;;" | sed -e 's;//*;/;g'`
pcp-5.2.2/install-sh:283: destfile=`basename "$2"`
pcp-5.2.2/install-sh-284- if [ -f "$f" -a -f "$f.exe" ]
##############################################
pcp-5.2.2/install-sh-339- else
pcp-5.2.2/install-sh:340: dir=`echo "$DIST_ROOT/$1" | sed -e 's;//*;/;g'`
pcp-5.2.2/install-sh-341- fi
##############################################
pcp-5.2.2/install-sh-347- # t_dir is for the manifest, i.e. without $DIST_ROOT prefix
pcp-5.2.2/install-sh:348: t_dir=`echo "$dir" | sed -e "s;^$DIST_ROOT;;"`
pcp-5.2.2/install-sh-349-
##############################################
pcp-5.2.2/m4/multilib.m4-25- libdirsuffix=""
pcp-5.2.2/m4/multilib.m4:26: searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'`
pcp-5.2.2/m4/multilib.m4-27- if test "$enable_lib64" = "yes" -a -n "$searchpath"; then
##############################################
pcp-5.2.2/m4/multilib.m4-32- */lib64/ | */lib64 ) libdirsuffix=64 ;;
pcp-5.2.2/m4/multilib.m4:33: *) searchdir=`cd "$searchdir" && pwd`
pcp-5.2.2/m4/multilib.m4-34- case "$searchdir" in
##############################################
pcp-5.2.2/m4/package_globals.m4-52-
pcp-5.2.2/m4/package_globals.m4:53: pkg_doc_dir=`eval echo $datadir`
pcp-5.2.2/m4/package_globals.m4:54: pkg_doc_dir=`eval echo $pkg_doc_dir/doc/pcp-gui`
pcp-5.2.2/m4/package_globals.m4:55: if test "`echo $pkg_doc_dir | sed 's;/.*\$;;'`" = NONE
pcp-5.2.2/m4/package_globals.m4-56- then
##############################################
pcp-5.2.2/m4/package_globals.m4-66-
pcp-5.2.2/m4/package_globals.m4:67: pkg_books_dir=`eval echo $datadir`
pcp-5.2.2/m4/package_globals.m4:68: pkg_books_dir=`eval echo $pkg_books_dir/doc/pcp-doc`
pcp-5.2.2/m4/package_globals.m4:69: if test "`echo $pkg_books_dir | sed 's;/.*\$;;'`" = NONE
pcp-5.2.2/m4/package_globals.m4-70- then
##############################################
pcp-5.2.2/m4/package_globals.m4-80-
pcp-5.2.2/m4/package_globals.m4:81: pkg_icon_dir=`eval echo $datadir`
pcp-5.2.2/m4/package_globals.m4:82: pkg_icon_dir=`eval echo $pkg_icon_dir/pixmaps`
pcp-5.2.2/m4/package_globals.m4:83: if test "`echo $pkg_icon_dir | sed 's;/.*\$;;'`" = NONE
pcp-5.2.2/m4/package_globals.m4-84- then
##############################################
pcp-5.2.2/m4/package_qtdev.m4-14- [ AC_MSG_CHECKING([Qt version])
pcp-5.2.2/m4/package_qtdev.m4:15: eval `$qmake --version | awk '/Using Qt version/ { ver=4; print $ver }' | awk -F. '{ major=1; minor=2; point=3; printf "export QT_MAJOR=%d QT_MINOR=%d QT_POINT=%d\n",$major,$minor,$point }'`
pcp-5.2.2/m4/package_qtdev.m4-16- if test "$QT_MAJOR" -lt 4 ; then
##############################################
pcp-5.2.2/m4/package_utilies.m4-172- AC_MSG_CHECKING([if yacc is executable])
pcp-5.2.2/m4/package_utilies.m4:173: binary=`echo $yacc | awk '{cmd=1; print $cmd}'`
pcp-5.2.2/m4/package_utilies.m4:174: binary=`which "$binary"`
pcp-5.2.2/m4/package_utilies.m4-175- if test -x "$binary"
##############################################
pcp-5.2.2/m4/package_utilies.m4-186- AC_MSG_CHECKING([if lex is executable])
pcp-5.2.2/m4/package_utilies.m4:187: binary=`echo $lex | awk '{cmd=1; print $cmd}'`
pcp-5.2.2/m4/package_utilies.m4:188: binary=`which "$binary"`
pcp-5.2.2/m4/package_utilies.m4-189- if test -x "$binary"
##############################################
pcp-5.2.2/m4/pkg.m4-75- PKG_CHECK_EXISTS([$3],
pcp-5.2.2/m4/pkg.m4:76: [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`
pcp-5.2.2/m4/pkg.m4-77- test "x$?" != "x0" && pkg_failed=yes ],
##############################################
pcp-5.2.2/m4/pkg.m4-124- if test $_pkg_short_errors_supported = yes; then
pcp-5.2.2/m4/pkg.m4:125: $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1`
pcp-5.2.2/m4/pkg.m4-126- else
pcp-5.2.2/m4/pkg.m4:127: $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1`
pcp-5.2.2/m4/pkg.m4-128- fi
##############################################
pcp-5.2.2/man/html/cpuperf/GNUmakefile-14- @ CDIR=`pwd`; cd ..; rm -f manifest; \
pcp-5.2.2/man/html/cpuperf/GNUmakefile:15: for f in `echo $^`; do \
pcp-5.2.2/man/html/cpuperf/GNUmakefile-16- echo $(BUNDLE)/$$f >> $$CDIR/manifest; \
##############################################
pcp-5.2.2/man/html/diskmodel/GNUmakefile-15- @ CDIR=`pwd`; cd ..; rm -f manifest; \
pcp-5.2.2/man/html/diskmodel/GNUmakefile:16: for f in `echo $^`; do \
pcp-5.2.2/man/html/diskmodel/GNUmakefile-17- echo $(BUNDLE)/$$f >> $$CDIR/manifest; \
##############################################
pcp-5.2.2/man/html/diskperf/GNUmakefile-14- @ CDIR=`pwd`; cd ..; rm -f manifest; \
pcp-5.2.2/man/html/diskperf/GNUmakefile:15: for f in `echo $^`; do \
pcp-5.2.2/man/html/diskperf/GNUmakefile-16- echo $(BUNDLE)/$$f >> $$CDIR/manifest; \
##############################################
pcp-5.2.2/man/html/pmie/GNUmakefile-14- @ CDIR=`pwd`; cd ..; rm -f manifest; \
pcp-5.2.2/man/html/pmie/GNUmakefile:15: for f in `echo $^`; do \
pcp-5.2.2/man/html/pmie/GNUmakefile-16- echo $(BUNDLE)/$$f >> $$CDIR/manifest; \
##############################################
pcp-5.2.2/man/html/pmview/GNUmakefile-14- @ CDIR=`pwd`; cd ..; rm -f manifest; \
pcp-5.2.2/man/html/pmview/GNUmakefile:15: for f in `echo $^`; do \
pcp-5.2.2/man/html/pmview/GNUmakefile-16- echo $(BUNDLE)/$$f >> $$CDIR/manifest; \
##############################################
pcp-5.2.2/man/html/portability-and-qa.html-371-but it can be rewritten as follows and this will work everywhere:<br>
pcp-5.2.2/man/html/portability-and-qa.html:372:<code>i=1; while [ $i -le 4 ]; do ...; i=`expr $i + 1`; done</code><br>
pcp-5.2.2/man/html/portability-and-qa.html-373-</p>
##############################################
pcp-5.2.2/man/man3/pmdaeventarray.3-64-.ti -8n
pcp-5.2.2/man/man3/pmdaeventarray.3:65:pmEventArray *pmdaEventGetAddr(int \fIidx\fP);
pcp-5.2.2/man/man3/pmdaeventarray.3-66-.sp
##############################################
pcp-5.2.2/man/man3/pmdaeventarray.3-90-.ti -8n
pcp-5.2.2/man/man3/pmdaeventarray.3:91:pmHighResEventArray *pmdaEventHighResGetAddr(int \fIidx\fP);
pcp-5.2.2/man/man3/pmdaeventarray.3-92-.sp
##############################################
pcp-5.2.2/man/man3/pmdaeventarray.3-298-// finish up
pcp-5.2.2/man/man3/pmdaeventarray.3:299:eap = pmdaEventGetAddr(myarray);
pcp-5.2.2/man/man3/pmdaeventarray.3-300-.fi
##############################################
pcp-5.2.2/man/man3i/fix-3i-27-done
pcp-5.2.2/man/man3i/fix-3i:28:shift `expr $OPTIND - 1`
pcp-5.2.2/man/man3i/fix-3i-29-
##############################################
pcp-5.2.2/man/man3i/fix-3i-110- then
pcp-5.2.2/man/man3i/fix-3i:111: echo "Error: $fail: `cat $tmp.err`"
pcp-5.2.2/man/man3i/fix-3i-112- else
##############################################
pcp-5.2.2/provisioning/qa.sh-4-else
pcp-5.2.2/provisioning/qa.sh:5: extras=`cd /vagrant && /vagrant/scripts/tests-from-commits -r "${2}" | xargs`
pcp-5.2.2/provisioning/qa.sh-6- sudo su - pcpqa -c "./check ${1} ${extras} >runqa.out 2>&1"
##############################################
pcp-5.2.2/qa/000-7-
pcp-5.2.2/qa/000:8:seq=`basename $0`
pcp-5.2.2/qa/000-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/001-7-
pcp-5.2.2/qa/001:8:seq=`basename $0`
pcp-5.2.2/qa/001-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/002-7-
pcp-5.2.2/qa/002:8:seq=`basename $0`
pcp-5.2.2/qa/002-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/003-8-
pcp-5.2.2/qa/003:9:seq=`basename $0`
pcp-5.2.2/qa/003-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/004-7-
pcp-5.2.2/qa/004:8:seq=`basename $0`
pcp-5.2.2/qa/004-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/005-7-
pcp-5.2.2/qa/005:8:seq=`basename $0`
pcp-5.2.2/qa/005-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/006-7-
pcp-5.2.2/qa/006:8:seq=`basename $0`
pcp-5.2.2/qa/006-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/006-20-sts=$PM_ERR_BASE
pcp-5.2.2/qa/006:21:top=`expr $PM_ERR_BASE + $PM_ERR_COUNT`
pcp-5.2.2/qa/006-22-while [ $sts -lt $top ]
##############################################
pcp-5.2.2/qa/006-24- pmerr -$sts
pcp-5.2.2/qa/006:25: sts=`expr $sts + 1`
pcp-5.2.2/qa/006-26-done \
##############################################
pcp-5.2.2/qa/007-7-
pcp-5.2.2/qa/007:8:seq=`basename $0`
pcp-5.2.2/qa/007-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/008-19-
pcp-5.2.2/qa/008:20:seq=`basename $0`
pcp-5.2.2/qa/008-21-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/009-7-
pcp-5.2.2/qa/009:8:seq=`basename $0`
pcp-5.2.2/qa/009-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/010-7-
pcp-5.2.2/qa/010:8:seq=`basename $0`
pcp-5.2.2/qa/010-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/011-7-
pcp-5.2.2/qa/011:8:seq=`basename $0`
pcp-5.2.2/qa/011-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/012-7-
pcp-5.2.2/qa/012:8:seq=`basename $0`
pcp-5.2.2/qa/012-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/013-7-
pcp-5.2.2/qa/013:8:seq=`basename $0`
pcp-5.2.2/qa/013-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/014-7-
pcp-5.2.2/qa/014:8:seq=`basename $0`
pcp-5.2.2/qa/014-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/015-7-
pcp-5.2.2/qa/015:8:seq=`basename $0`
pcp-5.2.2/qa/015-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/016-7-
pcp-5.2.2/qa/016:8:seq=`basename $0`
pcp-5.2.2/qa/016-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/017-7-
pcp-5.2.2/qa/017:8:seq=`basename $0`
pcp-5.2.2/qa/017-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/018-7-
pcp-5.2.2/qa/018:8:seq=`basename $0`
pcp-5.2.2/qa/018-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/019-7-
pcp-5.2.2/qa/019:8:seq=`basename $0`
pcp-5.2.2/qa/019-9-
##############################################
pcp-5.2.2/qa/020-7-
pcp-5.2.2/qa/020:8:seq=`basename $0`
pcp-5.2.2/qa/020-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/021-16-
pcp-5.2.2/qa/021:17:seq=`basename $0`
pcp-5.2.2/qa/021-18-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/022-8-
pcp-5.2.2/qa/022:9:seq=`basename $0`
pcp-5.2.2/qa/022-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/022-44- # Set variables pid, ppid, cpid for process ids
pcp-5.2.2/qa/022:45: eval `grep '^pid=' $input`
pcp-5.2.2/qa/022:46: eval `grep '^cpid=' $input`
pcp-5.2.2/qa/022-47- if [ -z "$pid" -o -z "$cpid" ]
##############################################
pcp-5.2.2/qa/023-8-
pcp-5.2.2/qa/023:9:seq=`basename $0`
pcp-5.2.2/qa/023-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/023-155- pmprobe pmcd.control.debug
pcp-5.2.2/qa/023:156: sleepers=`ps $PCP_PS_ALL_FLAGS | grep '[d]umb_pmda' | $PCP_AWK_PROG '$3 == 1 { print $2 }'`
pcp-5.2.2/qa/023-157- [ ! -z "$sleepers" ] && $sudo $signal -s TERM $sleepers
##############################################
pcp-5.2.2/qa/023-175-# Get a domain number for the 'fake_kernel' pmda
pcp-5.2.2/qa/023:176:FAKE_DOM=`pminfo -m hinv.ncpu | $PCP_AWK_PROG '{split ($3,d,"."); print d[1];}'`
pcp-5.2.2/qa/023-177-
##############################################
pcp-5.2.2/qa/024-7-
pcp-5.2.2/qa/024:8:seq=`basename $0`
pcp-5.2.2/qa/024-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/024-100-
pcp-5.2.2/qa/024:101:remote=`./getpmcdhosts -L -n 1 -a sample 2>$tmp.out`
pcp-5.2.2/qa/024:102:[ -z "$remote" ] && _notrun `cat $tmp.out`
pcp-5.2.2/qa/024-103-
##############################################
pcp-5.2.2/qa/025-7-
pcp-5.2.2/qa/025:8:seq=`basename $0`
pcp-5.2.2/qa/025-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/025-34- ENABLE_SYSTEMD=false
pcp-5.2.2/qa/025:35: eval `sed -n <$PCP_INC_DIR/builddefs -e '/ENABLE_SYSTEMD/s/ //gp'`
pcp-5.2.2/qa/025-36- if $ENABLE_SYSTEMD
##############################################
pcp-5.2.2/qa/026-7-
pcp-5.2.2/qa/026:8:seq=`basename $0`
pcp-5.2.2/qa/026-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/027-7-
pcp-5.2.2/qa/027:8:seq=`basename $0`
pcp-5.2.2/qa/027-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/028-7-
pcp-5.2.2/qa/028:8:seq=`basename $0`
pcp-5.2.2/qa/028-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/029-11-
pcp-5.2.2/qa/029:12:seq=`basename $0`
pcp-5.2.2/qa/029-13-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/030-7-
pcp-5.2.2/qa/030:8:seq=`basename $0`
pcp-5.2.2/qa/030-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/031-11-
pcp-5.2.2/qa/031:12:seq=`basename $0`
pcp-5.2.2/qa/031-13-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/032-7-
pcp-5.2.2/qa/032:8:seq=`basename $0`
pcp-5.2.2/qa/032-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/032-49-timeleft=`date +%S`
pcp-5.2.2/qa/032:50:timesleep=`expr 60 - $timeleft`
pcp-5.2.2/qa/032-51-sleep $timesleep
##############################################
pcp-5.2.2/qa/033-7-
pcp-5.2.2/qa/033:8:seq=`basename $0`
pcp-5.2.2/qa/033-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/033-37-# real QA test starts here
pcp-5.2.2/qa/033:38:root=`df / | $PCP_AWK_PROG 'NR == 2 { print $1 }'`
pcp-5.2.2/qa/033-39-echo "root=$root" >>$seq.full
##############################################
pcp-5.2.2/qa/033-49- then
pcp-5.2.2/qa/033:50: symroot=`realpath $root`
pcp-5.2.2/qa/033-51- else
pcp-5.2.2/qa/033:52: symroot=`ls -l $root | sed -e 's/.*-> //'`
pcp-5.2.2/qa/033-53- if [ -z "$symroot" ]
##############################################
pcp-5.2.2/qa/033-63- # /dev/disk/by-uuid/467793a8-5191-4940-90fb-38a6f28b035d -> ../../sda1
pcp-5.2.2/qa/033:64: dir=`dirname $root`
pcp-5.2.2/qa/033-65- while true
##############################################
pcp-5.2.2/qa/033-69- ../*)
pcp-5.2.2/qa/033:70: dir=`echo $dir | sed -e 's@/[^/]*$@@'`
pcp-5.2.2/qa/033:71: symroot=`echo $symroot | sed -e 's@\.\./\([^.]\)@\1@'`
pcp-5.2.2/qa/033-72- ;;
##############################################
pcp-5.2.2/qa/034-7-
pcp-5.2.2/qa/034:8:seq=`basename $0`
pcp-5.2.2/qa/034-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/035-7-
pcp-5.2.2/qa/035:8:seq=`basename $0`
pcp-5.2.2/qa/035-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/035-34-head -10 $tmp.out
pcp-5.2.2/qa/035:35:cull=`wc -l <$tmp.out | sed -e 's/ //g'`
pcp-5.2.2/qa/035:36:cull=`expr $cull - 20`
pcp-5.2.2/qa/035-37-echo "... $cull output lines deleted ..."
##############################################
pcp-5.2.2/qa/036-7-
pcp-5.2.2/qa/036:8:seq=`basename $0`
pcp-5.2.2/qa/036-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/036-73-do
pcp-5.2.2/qa/036:74: i=`expr $i + 1`
pcp-5.2.2/qa/036-75- echo "[$i] $1"
##############################################
pcp-5.2.2/qa/037-7-
pcp-5.2.2/qa/037:8:seq=`basename $0`
pcp-5.2.2/qa/037-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/038-8-
pcp-5.2.2/qa/038:9:seq=`basename $0`
pcp-5.2.2/qa/038-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/039-7-
pcp-5.2.2/qa/039:8:seq=`basename $0`
pcp-5.2.2/qa/039-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/040-7-
pcp-5.2.2/qa/040:8:seq=`basename $0`
pcp-5.2.2/qa/040-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/040-71-do
pcp-5.2.2/qa/040:72: seen=`expr $seen + 1`
pcp-5.2.2/qa/040-73- # expect one line, with a count of 15 sizes, all the same!
##############################################
pcp-5.2.2/qa/041-7-
pcp-5.2.2/qa/041:8:seq=`basename $0`
pcp-5.2.2/qa/041-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/042-7-
pcp-5.2.2/qa/042:8:seq=`basename $0`
pcp-5.2.2/qa/042-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/042-49-# real QA test starts here
pcp-5.2.2/qa/042:50:container=`$docker run -d busybox sleep 15`
pcp-5.2.2/qa/042-51-echo "== container: $container" >> $seq.full
##############################################
pcp-5.2.2/qa/042-74-pmprobe --values pmcd.hostname > $tmp.host
pcp-5.2.2/qa/042:75:container_hostname=`awk '{ print $3 }' $tmp.chost`
pcp-5.2.2/qa/042:76:localhost_hostname=`awk '{ print $3 }' $tmp.host`
pcp-5.2.2/qa/042-77-
##############################################
pcp-5.2.2/qa/043-7-
pcp-5.2.2/qa/043:8:seq=`basename $0`
pcp-5.2.2/qa/043-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/044-7-
pcp-5.2.2/qa/044:8:seq=`basename $0`
pcp-5.2.2/qa/044-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/045-7-
pcp-5.2.2/qa/045:8:seq=`basename $0`
pcp-5.2.2/qa/045-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/046-7-
pcp-5.2.2/qa/046:8:seq=`basename $0`
pcp-5.2.2/qa/046-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/047-7-
pcp-5.2.2/qa/047:8:seq=`basename $0`
pcp-5.2.2/qa/047-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/047-59-# real QA test starts here
pcp-5.2.2/qa/047:60:container=`$docker run -d busybox sleep 15`
pcp-5.2.2/qa/047-61-echo "== container: $container" >> $seq.full
##############################################
pcp-5.2.2/qa/047-67-
pcp-5.2.2/qa/047:68:eval pcp_hw_addr=`cat $tmp.pcp_hw | _pminfo_value eth0`
pcp-5.2.2/qa/047:69:eval pcp_inet_addr=`cat $tmp.pcp_inet | _pminfo_value eth0`
pcp-5.2.2/qa/047-70-echo "== pcp values:" >> $seq.full
##############################################
pcp-5.2.2/qa/048-7-
pcp-5.2.2/qa/048:8:seq=`basename $0`
pcp-5.2.2/qa/048-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/049-7-
pcp-5.2.2/qa/049:8:seq=`basename $0`
pcp-5.2.2/qa/049-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/050-7-
pcp-5.2.2/qa/050:8:seq=`basename $0`
pcp-5.2.2/qa/050-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/051-7-
pcp-5.2.2/qa/051:8:seq=`basename $0`
pcp-5.2.2/qa/051-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/051-31- do
pcp-5.2.2/qa/051:32: ipaddr=`host $hostname | sed -n -e '/ has address /s/.* //p'`
pcp-5.2.2/qa/051-33- if [ -z "$ipaddr" ]
##############################################
pcp-5.2.2/qa/052-7-
pcp-5.2.2/qa/052:8:seq=`basename $0`
pcp-5.2.2/qa/052-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/053-8-
pcp-5.2.2/qa/053:9:seq=`basename $0`
pcp-5.2.2/qa/053-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/054-8-
pcp-5.2.2/qa/054:9:seq=`basename $0`
pcp-5.2.2/qa/054-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/054-20-# real QA test starts here
pcp-5.2.2/qa/054:21:host=`./getpmcdhosts -L -n1 2>$tmp.out` # choose a non-local host (foreign server)
pcp-5.2.2/qa/054-22-if [ -z "$host" ]
pcp-5.2.2/qa/054-23-then
pcp-5.2.2/qa/054:24: _notrun "`cat $tmp.out`"
pcp-5.2.2/qa/054-25- # NOTREACHED
pcp-5.2.2/qa/054-26-fi
pcp-5.2.2/qa/054:27:eval realhost=`pmprobe -v -h $host pmcd.hostname | $PCP_AWK_PROG '{ print $3 }'`
pcp-5.2.2/qa/054:28:[ $realhost = Unknown ] && realhost=`pmhostname $host`
pcp-5.2.2/qa/054-29-
##############################################
pcp-5.2.2/qa/055-9-
pcp-5.2.2/qa/055:10:seq=`basename $0`
pcp-5.2.2/qa/055-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/056-9-
pcp-5.2.2/qa/056:10:seq=`basename $0`
pcp-5.2.2/qa/056-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/057-7-
pcp-5.2.2/qa/057:8:seq=`basename $0`
pcp-5.2.2/qa/057-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/058-8-
pcp-5.2.2/qa/058:9:seq=`basename $0`
pcp-5.2.2/qa/058-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/059-7-
pcp-5.2.2/qa/059:8:seq=`basename $0`
pcp-5.2.2/qa/059-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/060-7-
pcp-5.2.2/qa/060:8:seq=`basename $0`
pcp-5.2.2/qa/060-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/061-7-
pcp-5.2.2/qa/061:8:seq=`basename $0`
pcp-5.2.2/qa/061-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/062-9-
pcp-5.2.2/qa/062:10:seq=`basename $0`
pcp-5.2.2/qa/062-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/063-7-
pcp-5.2.2/qa/063:8:seq=`basename $0`
pcp-5.2.2/qa/063-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/064-7-
pcp-5.2.2/qa/064:8:seq=`basename $0`
pcp-5.2.2/qa/064-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/065-7-
pcp-5.2.2/qa/065:8:seq=`basename $0`
pcp-5.2.2/qa/065-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/066-8-
pcp-5.2.2/qa/066:9:seq=`basename $0`
pcp-5.2.2/qa/066-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/066-226- echo "$log missing!"
pcp-5.2.2/qa/066:227: ls -l `dirname $log`
pcp-5.2.2/qa/066-228- cat ${log}.prev >>$seq.full
pcp-5.2.2/qa/066-229- exit
pcp-5.2.2/qa/066:230: elif [ `egrep '^Host access' $log | wc -l` = 2 ]
pcp-5.2.2/qa/066-231- then
##############################################
pcp-5.2.2/qa/067-8-
pcp-5.2.2/qa/067:9:seq=`basename $0`
pcp-5.2.2/qa/067-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/068-11-
pcp-5.2.2/qa/068:12:seq=`basename $0`
pcp-5.2.2/qa/068-13-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/069-8-
pcp-5.2.2/qa/069:9:seq=`basename $0`
pcp-5.2.2/qa/069-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/069-155-
pcp-5.2.2/qa/069:156:network_byteorder=`cc -E $tmp.c | sed -e '/^ *$/d' | tail -1`
pcp-5.2.2/qa/069-157-
pcp-5.2.2/qa/069:158:_get_hex_addr()
pcp-5.2.2/qa/069-159-{
##############################################
pcp-5.2.2/qa/069-197-
pcp-5.2.2/qa/069:198:me_ip=`_host_to_ipaddr $LOCALHOST`
pcp-5.2.2/qa/069:199:me_xip=`_get_hex_addr $me_ip`
pcp-5.2.2/qa/069:200:other1_ip=`_host_to_ipaddr $other1`
pcp-5.2.2/qa/069:201:other1_xip=`_get_hex_addr $other1_ip`
pcp-5.2.2/qa/069:202:other2_ip=`_host_to_ipaddr $other2`
pcp-5.2.2/qa/069:203:other2_xip=`_get_hex_addr $other2_ip`
pcp-5.2.2/qa/069-204-
##############################################
pcp-5.2.2/qa/069-298- sed -e 's/".*"/"OTHERHOST1"/' <$tmp.tmp
pcp-5.2.2/qa/069:299: cnt=`expr $cnt + 1`
pcp-5.2.2/qa/069-300- [ $cnt -eq 2 ] && break
##############################################
pcp-5.2.2/qa/070-7-
pcp-5.2.2/qa/070:8:seq=`basename $0`
pcp-5.2.2/qa/070-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/070-18-
pcp-5.2.2/qa/070:19:remote=`./getpmcdhosts -L -n 1 2>$tmp.out`
pcp-5.2.2/qa/070-20-if [ -z "$remote" ]
pcp-5.2.2/qa/070-21-then
pcp-5.2.2/qa/070:22: _notrun "`cat $tmp.out`"
pcp-5.2.2/qa/070-23- # NOTREACHED
##############################################
pcp-5.2.2/qa/070-34- echo ""
pcp-5.2.2/qa/070:35: args=`echo "X$*" | sed -e "s/$remote/REMOTEHOST/" -e "s/^X//"`
pcp-5.2.2/qa/070-36- echo "Trying ... $args"
##############################################
pcp-5.2.2/qa/071-8-
pcp-5.2.2/qa/071:9:seq=`basename $0`
pcp-5.2.2/qa/071-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/072-7-
pcp-5.2.2/qa/072:8:seq=`basename $0`
pcp-5.2.2/qa/072-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/072-50-
pcp-5.2.2/qa/072:51:remote=`./getpmcdhosts -L -n 1 2>$tmp.out`
pcp-5.2.2/qa/072-52-if [ -z "$remote" ]
pcp-5.2.2/qa/072-53-then
pcp-5.2.2/qa/072:54: _notrun "`cat $tmp.out`"
pcp-5.2.2/qa/072-55- # NOTREACHED
##############################################
pcp-5.2.2/qa/072-69-
pcp-5.2.2/qa/072:70: numindom=`grep InDom: $tmp.out | wc -l | sed -e 's/ *//g'`
pcp-5.2.2/qa/072-71- if [ "X$numindom" != X5 ]
##############################################
pcp-5.2.2/qa/073-9-
pcp-5.2.2/qa/073:10:seq=`basename $0`
pcp-5.2.2/qa/073-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/074-7-
pcp-5.2.2/qa/074:8:seq=`basename $0`
pcp-5.2.2/qa/074-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/075-7-
pcp-5.2.2/qa/075:8:seq=`basename $0`
pcp-5.2.2/qa/075-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/075-76-
pcp-5.2.2/qa/075:77:remote=`./getpmcdhosts -L -n 1 -a sample 2>$tmp.out`
pcp-5.2.2/qa/075-78-if [ -z "$remote" ]
pcp-5.2.2/qa/075-79-then
pcp-5.2.2/qa/075:80: _notrun "`cat $tmp.out`"
pcp-5.2.2/qa/075-81- # NOTREACHED
##############################################
pcp-5.2.2/qa/076-7-
pcp-5.2.2/qa/076:8:seq=`basename $0`
pcp-5.2.2/qa/076-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/077-7-
pcp-5.2.2/qa/077:8:seq=`basename $0`
pcp-5.2.2/qa/077-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/077-20-
pcp-5.2.2/qa/077:21:remote=`./getpmcdhosts -n 1 -L 2>$tmp.out`
pcp-5.2.2/qa/077-22-if [ -z "$remote" ]
pcp-5.2.2/qa/077-23-then
pcp-5.2.2/qa/077:24: _notrun "`cat $tmp.out`"
pcp-5.2.2/qa/077-25- # NOTREACHED
##############################################
pcp-5.2.2/qa/078-7-
pcp-5.2.2/qa/078:8:seq=`basename $0`
pcp-5.2.2/qa/078-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/079-7-
pcp-5.2.2/qa/079:8:seq=`basename $0`
pcp-5.2.2/qa/079-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/080-7-
pcp-5.2.2/qa/080:8:seq=`basename $0`
pcp-5.2.2/qa/080-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/081-7-
pcp-5.2.2/qa/081:8:seq=`basename $0`
pcp-5.2.2/qa/081-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/081-26-
pcp-5.2.2/qa/081:27:host=`./getpmcdhosts -p single -n 1 -v 'pcp>=2' 2>$tmp.out`
pcp-5.2.2/qa/081-28-if [ -z "$host" ]
pcp-5.2.2/qa/081-29-then
pcp-5.2.2/qa/081:30: _notrun "`cat $tmp.out`"
pcp-5.2.2/qa/081-31- # NOTREACHED
##############################################
pcp-5.2.2/qa/082-7-
pcp-5.2.2/qa/082:8:seq=`basename $0`
pcp-5.2.2/qa/082-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/083-7-
pcp-5.2.2/qa/083:8:seq=`basename $0`
pcp-5.2.2/qa/083-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/083-73- done
pcp-5.2.2/qa/083:74: logger_pid=`$PCP_PS_PROG $PCP_PS_ALL_FLAGS | grep '[p]mlogger.*-P' | grep -v sudo | $PCP_AWK_PROG '{ print $2 }'`
pcp-5.2.2/qa/083-75- if [ ! -z "$logger_pid" ]
##############################################
pcp-5.2.2/qa/084-7-
pcp-5.2.2/qa/084:8:seq=`basename $0`
pcp-5.2.2/qa/084-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/085-7-
pcp-5.2.2/qa/085:8:seq=`basename $0`
pcp-5.2.2/qa/085-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/086-7-
pcp-5.2.2/qa/086:8:seq=`basename $0`
pcp-5.2.2/qa/086-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/087-7-
pcp-5.2.2/qa/087:8:seq=`basename $0`
pcp-5.2.2/qa/087-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/087-65- do
pcp-5.2.2/qa/087:66: samples=`expr 80 / $delta`
pcp-5.2.2/qa/087-67- [ $samples -gt 50 ] && samples=50
##############################################
pcp-5.2.2/qa/088-7-
pcp-5.2.2/qa/088:8:seq=`basename $0`
pcp-5.2.2/qa/088-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/089-7-
pcp-5.2.2/qa/089:8:seq=`basename $0`
pcp-5.2.2/qa/089-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/090-7-
pcp-5.2.2/qa/090:8:seq=`basename $0`
pcp-5.2.2/qa/090-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/091-7-
pcp-5.2.2/qa/091:8:seq=`basename $0`
pcp-5.2.2/qa/091-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/092-7-
pcp-5.2.2/qa/092:8:seq=`basename $0`
pcp-5.2.2/qa/092-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/092-20- cat >$tmp.out
pcp-5.2.2/qa/092:21: STAMP=`sed <$tmp.out -n -e '/pmGetArchiveEnd time:/s/.* //p'`
pcp-5.2.2/qa/092-22- if [ "X$STAMP" = X ]
##############################################
pcp-5.2.2/qa/093-7-
pcp-5.2.2/qa/093:8:seq=`basename $0`
pcp-5.2.2/qa/093-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/094-10-
pcp-5.2.2/qa/094:11:seq=`basename $0`
pcp-5.2.2/qa/094-12-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/095-7-
pcp-5.2.2/qa/095:8:seq=`basename $0`
pcp-5.2.2/qa/095-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/096-7-
pcp-5.2.2/qa/096:8:seq=`basename $0`
pcp-5.2.2/qa/096-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/097-7-
pcp-5.2.2/qa/097:8:seq=`basename $0`
pcp-5.2.2/qa/097-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/098-9-
pcp-5.2.2/qa/098:10:seq=`basename $0`
pcp-5.2.2/qa/098-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/099-7-
pcp-5.2.2/qa/099:8:seq=`basename $0`
pcp-5.2.2/qa/099-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/100-9-
pcp-5.2.2/qa/100:10:seq=`basename $0`
pcp-5.2.2/qa/100-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1000-8-
pcp-5.2.2/qa/1000:9:seq=`basename $0`
pcp-5.2.2/qa/1000-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1001-4-#
pcp-5.2.2/qa/1001:5:seq=`basename $0`
pcp-5.2.2/qa/1001-6-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1002-4-#
pcp-5.2.2/qa/1002:5:seq=`basename $0`
pcp-5.2.2/qa/1002-6-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1003-4-#
pcp-5.2.2/qa/1003:5:seq=`basename $0`
pcp-5.2.2/qa/1003-6-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1004-4-#
pcp-5.2.2/qa/1004:5:seq=`basename $0`
pcp-5.2.2/qa/1004-6-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1005-6-#
pcp-5.2.2/qa/1005:7:seq=`basename $0`
pcp-5.2.2/qa/1005-8-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1006-4-#
pcp-5.2.2/qa/1006:5:seq=`basename $0`
pcp-5.2.2/qa/1006-6-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1007-4-#
pcp-5.2.2/qa/1007:5:seq=`basename $0`
pcp-5.2.2/qa/1007-6-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1008-4-#
pcp-5.2.2/qa/1008:5:seq=`basename $0`
pcp-5.2.2/qa/1008-6-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1009-4-#
pcp-5.2.2/qa/1009:5:seq=`basename $0`
pcp-5.2.2/qa/1009-6-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/101-10-
pcp-5.2.2/qa/101:11:seq=`basename $0`
pcp-5.2.2/qa/101-12-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1010-4-#
pcp-5.2.2/qa/1010:5:seq=`basename $0`
pcp-5.2.2/qa/1010-6-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1010-35-pmlogger -c $tmp.log_conf -s 5s $tmp.log
pcp-5.2.2/qa/1010:36:offset=`_arch_start $tmp.log 0`
pcp-5.2.2/qa/1010-37-
##############################################
pcp-5.2.2/qa/1011-4-#
pcp-5.2.2/qa/1011:5:seq=`basename $0`
pcp-5.2.2/qa/1011-6-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1012-4-#
pcp-5.2.2/qa/1012:5:seq=`basename $0`
pcp-5.2.2/qa/1012-6-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1013-4-#
pcp-5.2.2/qa/1013:5:seq=`basename $0`
pcp-5.2.2/qa/1013-6-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1014-4-#
pcp-5.2.2/qa/1014:5:seq=`basename $0`
pcp-5.2.2/qa/1014-6-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1015-4-#
pcp-5.2.2/qa/1015:5:seq=`basename $0`
pcp-5.2.2/qa/1015-6-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1016-4-#
pcp-5.2.2/qa/1016:5:seq=`basename $0`
pcp-5.2.2/qa/1016-6-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1017-4-#
pcp-5.2.2/qa/1017:5:seq=`basename $0`
pcp-5.2.2/qa/1017-6-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1018-4-#
pcp-5.2.2/qa/1018:5:seq=`basename $0`
pcp-5.2.2/qa/1018-6-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1019-4-#
pcp-5.2.2/qa/1019:5:seq=`basename $0`
pcp-5.2.2/qa/1019-6-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/102-7-
pcp-5.2.2/qa/102:8:seq=`basename $0`
pcp-5.2.2/qa/102-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1020-4-#
pcp-5.2.2/qa/1020:5:seq=`basename $0`
pcp-5.2.2/qa/1020-6-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1021-4-#
pcp-5.2.2/qa/1021:5:seq=`basename $0`
pcp-5.2.2/qa/1021-6-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1022-5-#
pcp-5.2.2/qa/1022:6:seq=`basename $0`
pcp-5.2.2/qa/1022-7-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1023-4-#
pcp-5.2.2/qa/1023:5:seq=`basename $0`
pcp-5.2.2/qa/1023-6-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1024-7-
pcp-5.2.2/qa/1024:8:seq=`basename $0`
pcp-5.2.2/qa/1024-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1024-46-pmda=$PCP_PMDAS_DIR/linux/pmda_linux.so,linux_init
pcp-5.2.2/qa/1024:47:metrics=`pminfo -L -K clear -K add,60,$pmda disk.all disk.dev disk.dm disk.md disk.partitions hinv.map.dmname hinv.map.mdname | LC_COLLATE=POSIX sort`
pcp-5.2.2/qa/1024-48-
##############################################
pcp-5.2.2/qa/1024-54- tar xzf $tgz
pcp-5.2.2/qa/1024:55: base=`basename $tgz`
pcp-5.2.2/qa/1024-56-
##############################################
pcp-5.2.2/qa/1025-4-#
pcp-5.2.2/qa/1025:5:seq=`basename $0`
pcp-5.2.2/qa/1025-6-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1026-4-#
pcp-5.2.2/qa/1026:5:seq=`basename $0`
pcp-5.2.2/qa/1026-6-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1027-4-#
pcp-5.2.2/qa/1027:5:seq=`basename $0`
pcp-5.2.2/qa/1027-6-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1028-4-#
pcp-5.2.2/qa/1028:5:seq=`basename $0`
pcp-5.2.2/qa/1028-6-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1029-3-#
pcp-5.2.2/qa/1029:4:seq=`basename $0`
pcp-5.2.2/qa/1029-5-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/103-10-
pcp-5.2.2/qa/103:11:seq=`basename $0`
pcp-5.2.2/qa/103-12-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1030-7-
pcp-5.2.2/qa/1030:8:seq=`basename $0`
pcp-5.2.2/qa/1030-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1031-7-
pcp-5.2.2/qa/1031:8:seq=`basename $0`
pcp-5.2.2/qa/1031-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1032-7-
pcp-5.2.2/qa/1032:8:seq=`basename $0`
pcp-5.2.2/qa/1032-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1032-63-
pcp-5.2.2/qa/1032:64:container=`$docker run -d busybox sleep 15`
pcp-5.2.2/qa/1032-65-echo "container=$container" >> $seq.full
##############################################
pcp-5.2.2/qa/1032-68-pmprobe --values pmcd.hostname > $tmp.host
pcp-5.2.2/qa/1032:69:eval container_hostname=`awk '{ print $3 }' $tmp.cont`
pcp-5.2.2/qa/1032:70:eval localhost_hostname=`awk '{ print $3 }' $tmp.host`
pcp-5.2.2/qa/1032-71-echo "localhost_hostname=$localhost_hostname" >> $seq.full
##############################################
pcp-5.2.2/qa/1033-7-
pcp-5.2.2/qa/1033:8:seq=`basename $0`
pcp-5.2.2/qa/1033-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1033-82-
pcp-5.2.2/qa/1033:83: echo === Test case: `basename $file`
pcp-5.2.2/qa/1033-84- $sudo rm -f named.log
##############################################
pcp-5.2.2/qa/1034-7-
pcp-5.2.2/qa/1034:8:seq=`basename $0`
pcp-5.2.2/qa/1034-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1035-7-
pcp-5.2.2/qa/1035:8:seq=`basename $0`
pcp-5.2.2/qa/1035-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1035-20-# uses an existing oracle installation, so check its in place
pcp-5.2.2/qa/1035:21:count=`pmprobe oracle.version | awk '{ print $2 }'`
pcp-5.2.2/qa/1035-22-[ $count -ge 1 ] || _notrun "Oracle database PMDA is not setup and running"
##############################################
pcp-5.2.2/qa/1035-34-# extract configuration (os_user, username, password, sid) for sqlplus
pcp-5.2.2/qa/1035:35:eval `perl $PCP_PMDAS_DIR/oracle/connect.pl -c`
pcp-5.2.2/qa/1035-36-
##############################################
pcp-5.2.2/qa/1036-7-
pcp-5.2.2/qa/1036:8:seq=`basename $0`
pcp-5.2.2/qa/1036-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1036-24-{
pcp-5.2.2/qa/1036:25: tmpx=`echo $tmp`
pcp-5.2.2/qa/1036-26- sed -e 's/^Archive:.* Host:/ARCHIVE: Host:/' \
##############################################
pcp-5.2.2/qa/1037-7-
pcp-5.2.2/qa/1037:8:seq=`basename $0`
pcp-5.2.2/qa/1037-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1037-24-{
pcp-5.2.2/qa/1037:25: tmpx=`echo $tmp`
pcp-5.2.2/qa/1037-26- sed -e 's/^Archive:.* Host:/ARCHIVE: Host:/' \
##############################################
pcp-5.2.2/qa/1038-7-
pcp-5.2.2/qa/1038:8:seq=`basename $0`
pcp-5.2.2/qa/1038-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1038-28-{
pcp-5.2.2/qa/1038:29: tmpx=`echo $tmp`
pcp-5.2.2/qa/1038-30- sed -e 's/^Archive:.* Host:/ARCHIVE: Host:/' \
##############################################
pcp-5.2.2/qa/1039-7-
pcp-5.2.2/qa/1039:8:seq=`basename $0`
pcp-5.2.2/qa/1039-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/104-10-
pcp-5.2.2/qa/104:11:seq=`basename $0`
pcp-5.2.2/qa/104-12-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1040-7-
pcp-5.2.2/qa/1040:8:seq=`basename $0`
pcp-5.2.2/qa/1040-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1041-23-
pcp-5.2.2/qa/1041:24:seq=`basename $0`
pcp-5.2.2/qa/1041-25-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1042-8-
pcp-5.2.2/qa/1042:9:seq=`basename $0`
pcp-5.2.2/qa/1042-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1043-7-
pcp-5.2.2/qa/1043:8:seq=`basename $0`
pcp-5.2.2/qa/1043-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1044-7-
pcp-5.2.2/qa/1044:8:seq=`basename $0`
pcp-5.2.2/qa/1044-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1045-8-
pcp-5.2.2/qa/1045:9:seq=`basename $0`
pcp-5.2.2/qa/1045-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1046-7-
pcp-5.2.2/qa/1046:8:seq=`basename $0`
pcp-5.2.2/qa/1046-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1047-7-
pcp-5.2.2/qa/1047:8:seq=`basename $0`
pcp-5.2.2/qa/1047-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1048-7-
pcp-5.2.2/qa/1048:8:seq=`basename $0`
pcp-5.2.2/qa/1048-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1049-8-
pcp-5.2.2/qa/1049:9:seq=`basename $0`
pcp-5.2.2/qa/1049-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/105-10-
pcp-5.2.2/qa/105:11:seq=`basename $0`
pcp-5.2.2/qa/105-12-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1050-7-
pcp-5.2.2/qa/1050:8:seq=`basename $0`
pcp-5.2.2/qa/1050-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1051-8-
pcp-5.2.2/qa/1051:9:seq=`basename $0`
pcp-5.2.2/qa/1051-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1052-7-
pcp-5.2.2/qa/1052:8:seq=`basename $0`
pcp-5.2.2/qa/1052-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1052-12-
pcp-5.2.2/qa/1052:13:python_path=`which $python`
pcp-5.2.2/qa/1052-14-pmda_path="$PCP_PMDAS_DIR/json"
##############################################
pcp-5.2.2/qa/1053-7-
pcp-5.2.2/qa/1053:8:seq=`basename $0`
pcp-5.2.2/qa/1053-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1054-7-
pcp-5.2.2/qa/1054:8:seq=`basename $0`
pcp-5.2.2/qa/1054-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1055-7-
pcp-5.2.2/qa/1055:8:seq=`basename $0`
pcp-5.2.2/qa/1055-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1055-96-#
pcp-5.2.2/qa/1055:97:archive=$LOGGING_DIR/$LOCALHOST/`pmafm $LOGGING_DIR/$LOCALHOST/Latest list | sed -n -e '/ 1]/s/.* //p'`
pcp-5.2.2/qa/1055-98-echo "archive=$archive" >>$seq.full
##############################################
pcp-5.2.2/qa/1056-8-
pcp-5.2.2/qa/1056:9:seq=`basename $0`
pcp-5.2.2/qa/1056-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1057-7-
pcp-5.2.2/qa/1057:8:seq=`basename $0`
pcp-5.2.2/qa/1057-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1058-7-
pcp-5.2.2/qa/1058:8:seq=`basename $0`
pcp-5.2.2/qa/1058-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1059-7-
pcp-5.2.2/qa/1059:8:seq=`basename $0`
pcp-5.2.2/qa/1059-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1059-35-else
pcp-5.2.2/qa/1059:36: if [ "`wc -l <$tmp.pid | sed -e 's/ //g'`" -gt 1 ]
pcp-5.2.2/qa/1059-37- then
##############################################
pcp-5.2.2/qa/1059-48- else
pcp-5.2.2/qa/1059:49: if grep "^`cat $PCP_RUN_DIR/pmcd.pid`\$" $tmp.pid >/dev/null
pcp-5.2.2/qa/1059-50- then
##############################################
pcp-5.2.2/qa/1059-52- else
pcp-5.2.2/qa/1059:53: echo "Error: $PCP_RUN_DIR/pmcd.pid (`cat $PCP_RUN_DIR/pmcd.pid`) does not match running pmcds:"
pcp-5.2.2/qa/1059-54- sed -e 's/^/ /' <$tmp.out
##############################################
pcp-5.2.2/qa/1059-56- fi
pcp-5.2.2/qa/1059:57: if grep -v "^`cat $PCP_RUN_DIR/pmcd.pid`\$" $tmp.pid >$tmp.out
pcp-5.2.2/qa/1059-58- then
pcp-5.2.2/qa/1059:59: echo "Error: $PCP_RUN_DIR/pmcd.pid (`cat $PCP_RUN_DIR/pmcd.pid`) does not match these pmcd PID(s):"
pcp-5.2.2/qa/1059-60- sed -e 's/^/ /' <$tmp.out
##############################################
pcp-5.2.2/qa/1059-73- | uniq >$tmp.tmp
pcp-5.2.2/qa/1059:74: if grep "^pmcd `cat $PCP_RUN_DIR/pmcd.pid`\$" $tmp.tmp >/dev/null
pcp-5.2.2/qa/1059-75- then
##############################################
pcp-5.2.2/qa/1059-77- else
pcp-5.2.2/qa/1059:78: echo "Error: pmcd's PMID (`cat $PCP_RUN_DIR/pmcd.pid`) does not match $PCP_RUN_DIR/pmcd.socket owner"
pcp-5.2.2/qa/1059-79- $sudo lsof -U | grep $PCP_RUN_DIR/pmcd.socket
##############################################
pcp-5.2.2/qa/1059-81- fi
pcp-5.2.2/qa/1059:82: if grep -v "^pmcd `cat $PCP_RUN_DIR/pmcd.pid`\$" $tmp.tmp >$tmp.out
pcp-5.2.2/qa/1059-83- then
##############################################
pcp-5.2.2/qa/106-10-
pcp-5.2.2/qa/106:11:seq=`basename $0`
pcp-5.2.2/qa/106-12-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1060-8-
pcp-5.2.2/qa/1060:9:seq=`basename $0`
pcp-5.2.2/qa/1060-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1061-7-
pcp-5.2.2/qa/1061:8:seq=`basename $0`
pcp-5.2.2/qa/1061-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1062-7-
pcp-5.2.2/qa/1062:8:seq=`basename $0`
pcp-5.2.2/qa/1062-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1063-7-
pcp-5.2.2/qa/1063:8:seq=`basename $0`
pcp-5.2.2/qa/1063-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1064-7-
pcp-5.2.2/qa/1064:8:seq=`basename $0`
pcp-5.2.2/qa/1064-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1065-7-
pcp-5.2.2/qa/1065:8:seq=`basename $0`
pcp-5.2.2/qa/1065-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1066-15-
pcp-5.2.2/qa/1066:16:seq=`basename $0`
pcp-5.2.2/qa/1066-17-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1067-7-
pcp-5.2.2/qa/1067:8:seq=`basename $0`
pcp-5.2.2/qa/1067-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1068-7-
pcp-5.2.2/qa/1068:8:seq=`basename $0`
pcp-5.2.2/qa/1068-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1068-81-# check the first line has the initial ZBXD preamble (before JSON)
pcp-5.2.2/qa/1068:82:header=`_zbx_header $tmp.socat.out`
pcp-5.2.2/qa/1068-83-echo "header: $header"
##############################################
pcp-5.2.2/qa/1068-103-# check the first line has the initial ZBXD preamble (before JSON)
pcp-5.2.2/qa/1068:104:header=`_zbx_header $tmp.socat.out`
pcp-5.2.2/qa/1068-105-echo "header: $header"
##############################################
pcp-5.2.2/qa/1069-7-
pcp-5.2.2/qa/1069:8:seq=`basename $0`
pcp-5.2.2/qa/1069-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/107-7-
pcp-5.2.2/qa/107:8:seq=`basename $0`
pcp-5.2.2/qa/107-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/107-74-$PCP_ECHO_PROG $PCP_ECHO_N "Expect at least 250 metrics to be reported ...""$PCP_ECHO_C"
pcp-5.2.2/qa/107:75:num=`egrep '^(disk|network|kernel|pmcd|sample|sampledso)\.' $tmp.tmp | wc -l | sed -e 's/ //g'`
pcp-5.2.2/qa/107-76-if [ $num -ge 250 ]
##############################################
pcp-5.2.2/qa/1070-7-
pcp-5.2.2/qa/1070:8:seq=`basename $0`
pcp-5.2.2/qa/1070-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1071-8-
pcp-5.2.2/qa/1071:9:seq=`basename $0`
pcp-5.2.2/qa/1071-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1072-7-
pcp-5.2.2/qa/1072:8:seq=`basename $0`
pcp-5.2.2/qa/1072-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1073-7-
pcp-5.2.2/qa/1073:8:seq=`basename $0`
pcp-5.2.2/qa/1073-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1073-33-
pcp-5.2.2/qa/1073:34:vfs_metrics=`pminfo $local vfs | LC_COLLATE=POSIX sort`
pcp-5.2.2/qa/1073:35:sys_metrics=`pminfo $local kernel.all.entropy | LC_COLLATE=POSIX sort`
pcp-5.2.2/qa/1073-36-sys_metrics="$sys_metrics kernel.all.pid_max"
##############################################
pcp-5.2.2/qa/1073-42- tar xzf $tgz
pcp-5.2.2/qa/1073:43: base=`basename $tgz`
pcp-5.2.2/qa/1073-44-
##############################################
pcp-5.2.2/qa/1074-12-
pcp-5.2.2/qa/1074:13:seq=`basename $0`
pcp-5.2.2/qa/1074-14-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1075-7-
pcp-5.2.2/qa/1075:8:seq=`basename $0`
pcp-5.2.2/qa/1075-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1076-7-
pcp-5.2.2/qa/1076:8:seq=`basename $0`
pcp-5.2.2/qa/1076-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1076-28-do
pcp-5.2.2/qa/1076:29: archive=`echo $file | sed -e 's/\.meta$//'`
pcp-5.2.2/qa/1076-30- echo
##############################################
pcp-5.2.2/qa/1077-7-
pcp-5.2.2/qa/1077:8:seq=`basename $0`
pcp-5.2.2/qa/1077-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1078-7-
pcp-5.2.2/qa/1078:8:seq=`basename $0`
pcp-5.2.2/qa/1078-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1079-7-
pcp-5.2.2/qa/1079:8:seq=`basename $0`
pcp-5.2.2/qa/1079-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/108-7-
pcp-5.2.2/qa/108:8:seq=`basename $0`
pcp-5.2.2/qa/108-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/108-22- -e 's/value [0-9][0-9]*/value NUMBER/' >$tmp.tmp
pcp-5.2.2/qa/108:23: if [ `egrep 'red|green|blue' $tmp.tmp | wc -l | sed -e 's/ *//g'` -ge 1 ]
pcp-5.2.2/qa/108-24- then
##############################################
pcp-5.2.2/qa/1080-7-
pcp-5.2.2/qa/1080:8:seq=`basename $0`
pcp-5.2.2/qa/1080-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1081-7-
pcp-5.2.2/qa/1081:8:seq=`basename $0`
pcp-5.2.2/qa/1081-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1082-10-
pcp-5.2.2/qa/1082:11:seq=`basename $0`
pcp-5.2.2/qa/1082-12-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1083-7-
pcp-5.2.2/qa/1083:8:seq=`basename $0`
pcp-5.2.2/qa/1083-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1084-7-
pcp-5.2.2/qa/1084:8:seq=`basename $0`
pcp-5.2.2/qa/1084-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1085-7-
pcp-5.2.2/qa/1085:8:seq=`basename $0`
pcp-5.2.2/qa/1085-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1086-7-
pcp-5.2.2/qa/1086:8:seq=`basename $0`
pcp-5.2.2/qa/1086-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1087-7-
pcp-5.2.2/qa/1087:8:seq=`basename $0`
pcp-5.2.2/qa/1087-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1087-42-rm -f $tmp.out
pcp-5.2.2/qa/1087:43:xmlfiles=`ls $here/named/bind-*.xml | LC_COLLATE=POSIX sort`
pcp-5.2.2/qa/1087-44-for xml in $xmlfiles
pcp-5.2.2/qa/1087-45-do
pcp-5.2.2/qa/1087:46: base=`basename $xml`
pcp-5.2.2/qa/1087-47-
##############################################
pcp-5.2.2/qa/1087-67- echo "=== $iam metrics ==="
pcp-5.2.2/qa/1087:68: metrics=`pminfo $iam | LC_COLLATE=POSIX sort`
pcp-5.2.2/qa/1087-69- pminfo -fmdtT $metrics
##############################################
pcp-5.2.2/qa/1088-6-#
pcp-5.2.2/qa/1088:7:seq=`basename $0`
pcp-5.2.2/qa/1088-8-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1088-48-echo "=== check outout ===" | tee -a $seq.full
pcp-5.2.2/qa/1088:49:count=`ls -1 $tmp.dir/my_host_id/archive-static_date_string.meta | wc -l`
pcp-5.2.2/qa/1088-50-if [ $count -gt 0 ]; then
##############################################
pcp-5.2.2/qa/1089-7-
pcp-5.2.2/qa/1089:8:seq=`basename $0`
pcp-5.2.2/qa/1089-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/109-8-
pcp-5.2.2/qa/109:9:seq=`basename $0`
pcp-5.2.2/qa/109-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1090-10-
pcp-5.2.2/qa/1090:11:seq=`basename $0`
pcp-5.2.2/qa/1090-12-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1091-7-
pcp-5.2.2/qa/1091:8:seq=`basename $0`
pcp-5.2.2/qa/1091-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1092-7-
pcp-5.2.2/qa/1092:8:seq=`basename $0`
pcp-5.2.2/qa/1092-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1093-7-
pcp-5.2.2/qa/1093:8:seq=`basename $0`
pcp-5.2.2/qa/1093-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1094-7-
pcp-5.2.2/qa/1094:8:seq=`basename $0`
pcp-5.2.2/qa/1094-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1094-45-preamble$(blah)`foo`$bar " /some/path/$(date +2015) " -c someconfig
pcp-5.2.2/qa/1094:46:preamble$(blah)`foo`$bar `echo /some/path` -c someconfig
pcp-5.2.2/qa/1094:47:preamble$(blah)`foo`$bar ` echo /some/path ` -c someconfig
pcp-5.2.2/qa/1094:48:preamble$(blah)`foo`$bar "/some/path/`date +2015`" -c someconfig
pcp-5.2.2/qa/1094-49-preamble$(blah)`foo`$bar $(bad command -c someconfig
pcp-5.2.2/qa/1094:50:preamble$(blah)`foo`$bar `bad command -c someconfig
pcp-5.2.2/qa/1094-51-preamble$(blah)`foo`$bar "bad string -c someconfig
pcp-5.2.2/qa/1094:52:preamble$(blah)`foo`$bar "embedded_backquote`date +2015`.postfix" -c someconfig
pcp-5.2.2/qa/1094:53:preamble$(blah)`foo`$bar bad_embedded_backquote`date +2015`.postfix -c someconfig
pcp-5.2.2/qa/1094-54-preamble$(blah)`foo`$bar "embedded_cmd\$(date +2015).postfix" -c someconfig
##############################################
pcp-5.2.2/qa/1094-61- echo "processed \$dir |$dir| \$args |$args|"
pcp-5.2.2/qa/1094:62: line=`expr $line + 1`
pcp-5.2.2/qa/1094-63-done
##############################################
pcp-5.2.2/qa/1094.out-26-
pcp-5.2.2/qa/1094.out:27:input $dir |`echo| $args |/some/path` -c someconfig|
pcp-5.2.2/qa/1094.out-28-processed $dir |/some/path| $args |-c someconfig|
pcp-5.2.2/qa/1094.out-29-
pcp-5.2.2/qa/1094.out:30:input $dir |`| $args |echo /some/path ` -c someconfig|
pcp-5.2.2/qa/1094.out-31-processed $dir |/some/path| $args |-c someconfig|
pcp-5.2.2/qa/1094.out-32-
pcp-5.2.2/qa/1094.out:33:input $dir |"/some/path/`date| $args |+2015`" -c someconfig|
pcp-5.2.2/qa/1094.out-34-processed $dir |/some/path/2015| $args |-c someconfig|
##############################################
pcp-5.2.2/qa/1094.out-50-
pcp-5.2.2/qa/1094.out:51:input $dir |"embedded_backquote`date| $args |+2015`.postfix" -c someconfig|
pcp-5.2.2/qa/1094.out-52-processed $dir |embedded_backquote2015.postfix| $args |-c someconfig|
pcp-5.2.2/qa/1094.out-53-
pcp-5.2.2/qa/1094.out:54:input $dir |bad_embedded_backquote`date| $args |+2015`.postfix -c someconfig|
pcp-5.2.2/qa/1094.out-55-[<stdin>:16]
pcp-5.2.2/qa/1094.out-56-Error: embedded ` without enclosing ": bad_embedded_backquote`date
pcp-5.2.2/qa/1094.out:57:processed $dir |bad_embedded_backquote`date| $args |+2015`.postfix -c someconfig|
pcp-5.2.2/qa/1094.out-58-
##############################################
pcp-5.2.2/qa/1095-10-
pcp-5.2.2/qa/1095:11:seq=`basename $0`
pcp-5.2.2/qa/1095-12-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1096-6-#
pcp-5.2.2/qa/1096:7:seq=`basename $0`
pcp-5.2.2/qa/1096-8-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1097-9-
pcp-5.2.2/qa/1097:10:seq=`basename $0`
pcp-5.2.2/qa/1097-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1098-7-
pcp-5.2.2/qa/1098:8:seq=`basename $0`
pcp-5.2.2/qa/1098-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1099-11-
pcp-5.2.2/qa/1099:12:seq=`basename $0`
pcp-5.2.2/qa/1099-13-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/110-7-
pcp-5.2.2/qa/110:8:seq=`basename $0`
pcp-5.2.2/qa/110-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/110-18-
pcp-5.2.2/qa/110:19:ROOT_LOG_PATH=`echo $PCP_PMCDLOG_PATH | sed -e 's/pmcd.log/root.log/'`
pcp-5.2.2/qa/110:20:PMDA_LOG_PATH=`echo $PCP_PMCDLOG_PATH | sed -e 's/pmcd.log/simple.log/'`
pcp-5.2.2/qa/110-21-
##############################################
pcp-5.2.2/qa/110-205-# use next port this time
pcp-5.2.2/qa/110:206:port2=`expr $port1 + 1`
pcp-5.2.2/qa/110-207-
##############################################
pcp-5.2.2/qa/1100-7-
pcp-5.2.2/qa/1100:8:seq=`basename $0`
pcp-5.2.2/qa/1100-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1100-84-# sources
pcp-5.2.2/qa/1100:85:share_dir=`dirname $PCP_SHARE_DIR`
pcp-5.2.2/qa/1100-86-bash_comp=${share_dir}/bash-completion/completions/pcp
##############################################
pcp-5.2.2/qa/1101-7-
pcp-5.2.2/qa/1101:8:seq=`basename $0`
pcp-5.2.2/qa/1101-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1102-12-
pcp-5.2.2/qa/1102:13:seq=`basename $0`
pcp-5.2.2/qa/1102-14-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1103-7-
pcp-5.2.2/qa/1103:8:seq=`basename $0`
pcp-5.2.2/qa/1103-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1104-7-
pcp-5.2.2/qa/1104:8:seq=`basename $0`
pcp-5.2.2/qa/1104-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1104-35- echo $all_metric $all_value >>$here/$seq.full
pcp-5.2.2/qa/1104:36: percpu_metric=`echo "$all_metric" | sed -e 's/all/percpu/'`
pcp-5.2.2/qa/1104:37: percpu_numval=`grep "^$percpu_metric " $tmp.raw | $PCP_AWK_PROG '{ print $2 }'`
pcp-5.2.2/qa/1104-38- ok=true
##############################################
pcp-5.2.2/qa/1105-7-
pcp-5.2.2/qa/1105:8:seq=`basename $0`
pcp-5.2.2/qa/1105-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1106-7-
pcp-5.2.2/qa/1106:8:seq=`basename $0`
pcp-5.2.2/qa/1106-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1107-9-
pcp-5.2.2/qa/1107:10:seq=`basename $0`
pcp-5.2.2/qa/1107-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1108-10-
pcp-5.2.2/qa/1108:11:seq=`basename $0`
pcp-5.2.2/qa/1108-12-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1108-87- [ "$file" = "*/$SUMMARY_LOGNAME*" ] && continue
pcp-5.2.2/qa/1108:88: dir=`dirname $file`
pcp-5.2.2/qa/1108-89- [ ! -d "$dir/$seq" ] && $sudo mkdir "$dir/$seq"
##############################################
pcp-5.2.2/qa/1108-126- sleep 1
pcp-5.2.2/qa/1108:127: sec=`expr $sec + 1`
pcp-5.2.2/qa/1108-128-done
##############################################
pcp-5.2.2/qa/1109-10-
pcp-5.2.2/qa/1109:11:seq=`basename $0`
pcp-5.2.2/qa/1109-12-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/111-7-
pcp-5.2.2/qa/111:8:seq=`basename $0`
pcp-5.2.2/qa/111-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/111-18-# real QA test starts here
pcp-5.2.2/qa/111:19:pmcd_pid=`grep "pmcd: PID" $PCP_PMCDLOG_PATH | $PCP_AWK_PROG '{ print $4 }'`
pcp-5.2.2/qa/111-20-
##############################################
pcp-5.2.2/qa/1110-7-
pcp-5.2.2/qa/1110:8:seq=`basename $0`
pcp-5.2.2/qa/1110-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1110-18-# from the PMDA's Install script
pcp-5.2.2/qa/1110:19:eval `$PCP_PYTHON_PROG $PCP_PMDAS_DIR/haproxy/connect --config`
pcp-5.2.2/qa/1110-20-[ -n "$user" ] || _notrun "haproxy PMDA's connect script failed to set \$user"
##############################################
pcp-5.2.2/qa/1111-6-#
pcp-5.2.2/qa/1111:7:seq=`basename $0`
pcp-5.2.2/qa/1111-8-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1111-18-[ $? -eq 0 ] || _notrun "python requests module not installed"
pcp-5.2.2/qa/1111:19:major=`$python -c 'import requests; print(requests.__version__.split(".")[0])'`
pcp-5.2.2/qa/1111-20-[ $major -ge 1 ] || _notrun "python requests module too old (v$major)"
##############################################
pcp-5.2.2/qa/1112-8-
pcp-5.2.2/qa/1112:9:seq=`basename $0`
pcp-5.2.2/qa/1112-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1113-7-
pcp-5.2.2/qa/1113:8:seq=`basename $0`
pcp-5.2.2/qa/1113-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1114-7-
pcp-5.2.2/qa/1114:8:seq=`basename $0`
pcp-5.2.2/qa/1114-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1114-41-[ $? -eq 0 ] || echo "Error running pmlogextract $IN $OUT -- see $seq.full"
pcp-5.2.2/qa/1114:42:IN=`echo $IN | sed -e 's/ /,/g'`
pcp-5.2.2/qa/1114-43-
##############################################
pcp-5.2.2/qa/1115-7-
pcp-5.2.2/qa/1115:8:seq=`basename $0`
pcp-5.2.2/qa/1115-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1116-7-
pcp-5.2.2/qa/1116:8:seq=`basename $0`
pcp-5.2.2/qa/1116-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1116-36-
pcp-5.2.2/qa/1116:37: _values=`awk '/inst.*value/ {print $NF}' $tmp.value`
pcp-5.2.2/qa/1116-38- for value in $_values
##############################################
pcp-5.2.2/qa/1117-7-
pcp-5.2.2/qa/1117:8:seq=`basename $0`
pcp-5.2.2/qa/1117-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1118-7-
pcp-5.2.2/qa/1118:8:seq=`basename $0`
pcp-5.2.2/qa/1118-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1119-7-
pcp-5.2.2/qa/1119:8:seq=`basename $0`
pcp-5.2.2/qa/1119-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1119-24-{
pcp-5.2.2/qa/1119:25: tmpx=`echo $tmp`
pcp-5.2.2/qa/1119-26- sed -e 's/^Archive:.* Host:/ARCHIVE: Host:/' \
##############################################
pcp-5.2.2/qa/112-7-
pcp-5.2.2/qa/112:8:seq=`basename $0`
pcp-5.2.2/qa/112-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1120-8-
pcp-5.2.2/qa/1120:9:seq=`basename $0`
pcp-5.2.2/qa/1120-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1120-91-do
pcp-5.2.2/qa/1120:92: pminfo -f `pminfo openmetrics.source$i | LC_COLLATE=POSIX sort`
pcp-5.2.2/qa/1120-93- pmsleep 0.0005
##############################################
pcp-5.2.2/qa/1121-7-
pcp-5.2.2/qa/1121:8:seq=`basename $0`
pcp-5.2.2/qa/1121-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1121-42-
pcp-5.2.2/qa/1121:43:tape_metrics=`pminfo $local hinv.ntape tape.dev | LC_COLLATE=POSIX sort`
pcp-5.2.2/qa/1121-44-for tgz in $here/linux/tape-root-*.tgz
##############################################
pcp-5.2.2/qa/1121-49- tar xzf $tgz
pcp-5.2.2/qa/1121:50: base=`basename $tgz`
pcp-5.2.2/qa/1121-51-
##############################################
pcp-5.2.2/qa/1122-8-
pcp-5.2.2/qa/1122:9:seq=`basename $0`
pcp-5.2.2/qa/1122-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1123-7-
pcp-5.2.2/qa/1123:8:seq=`basename $0`
pcp-5.2.2/qa/1123-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1123-71-#
pcp-5.2.2/qa/1123:72:cd `dirname $tmp`
pcp-5.2.2/qa/1123:73:pmchart -c `basename $tmp.sh` -C -C
pcp-5.2.2/qa/1123-74-
##############################################
pcp-5.2.2/qa/1124-7-
pcp-5.2.2/qa/1124:8:seq=`basename $0`
pcp-5.2.2/qa/1124-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1126-7-
pcp-5.2.2/qa/1126:8:seq=`basename $0`
pcp-5.2.2/qa/1126-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1127-7-
pcp-5.2.2/qa/1127:8:seq=`basename $0`
pcp-5.2.2/qa/1127-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1128-7-
pcp-5.2.2/qa/1128:8:seq=`basename $0`
pcp-5.2.2/qa/1128-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1129-7-
pcp-5.2.2/qa/1129:8:seq=`basename $0`
pcp-5.2.2/qa/1129-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/113-7-
pcp-5.2.2/qa/113:8:seq=`basename $0`
pcp-5.2.2/qa/113-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/113-18-then
pcp-5.2.2/qa/113:19: loopcount=`$sudo losetup -a | wc -l`
pcp-5.2.2/qa/113-20- [ $loopcount -eq 0 ] || _notrun "System has active loop devices, bailing"
##############################################
pcp-5.2.2/qa/113-56-echo "-- df / --" >>$seq.full
pcp-5.2.2/qa/113:57:rootdev=`df / | tee -a $seq.full | $PCP_AWK_PROG 'NR == 2 { print $1 }'`
pcp-5.2.2/qa/113-58-echo "rootdev=$rootdev" >>$seq.full
##############################################
pcp-5.2.2/qa/113-68- then
pcp-5.2.2/qa/113:69: symroot=`realpath $rootdev`
pcp-5.2.2/qa/113-70- else
pcp-5.2.2/qa/113:71: symroot=`ls -l $rootdev | sed -e 's/.*-> //'`
pcp-5.2.2/qa/113-72- if [ -z "$symroot" ]
##############################################
pcp-5.2.2/qa/113-82- # /dev/disk/by-uuid/467793a8-5191-4940-90fb-38a6f28b035d -> ../../sda1
pcp-5.2.2/qa/113:83: dir=`dirname $rootdev`
pcp-5.2.2/qa/113-84- while true
##############################################
pcp-5.2.2/qa/113-88- ../*)
pcp-5.2.2/qa/113:89: dir=`echo $dir | sed -e 's@/[^/]*$@@'`
pcp-5.2.2/qa/113:90: symroot=`echo $symroot | sed -e 's@\.\./\([^.]\)@\1@'`
pcp-5.2.2/qa/113-91- ;;
##############################################
pcp-5.2.2/qa/113-136- then
pcp-5.2.2/qa/113:137: sym=`realpath $dev`
pcp-5.2.2/qa/113-138- else
pcp-5.2.2/qa/113:139: sym=`ls -l $dev | sed -e 's/.*-> //'`
pcp-5.2.2/qa/113-140- if [ -z "$sym" ]
##############################################
pcp-5.2.2/qa/113-150- # /dev/disk/by-uuid/467793a8-5191-4940-90fb-38a6f28b035d -> ../../sda1
pcp-5.2.2/qa/113:151: dir=`dirname $dev`
pcp-5.2.2/qa/113-152- while true
##############################################
pcp-5.2.2/qa/113-156- ../*)
pcp-5.2.2/qa/113:157: dir=`echo $dir | sed -e 's@/[^/]*$@@'`
pcp-5.2.2/qa/113:158: sym=`echo $sym | sed -e 's@\.\./\([^.]\)@\1@'`
pcp-5.2.2/qa/113-159- ;;
##############################################
pcp-5.2.2/qa/113-196-
pcp-5.2.2/qa/113:197:numval=`pmprobe -v filesys.avail 2>/dev/null | $PCP_AWK_PROG '{print $2}'`
pcp-5.2.2/qa/113-198-if [ ! -z "$numval" -a "$numval" -gt 0 ]
##############################################
pcp-5.2.2/qa/1130-6-#
pcp-5.2.2/qa/1130:7:seq=`basename $0`
pcp-5.2.2/qa/1130-8-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1130-43-
pcp-5.2.2/qa/1130:44:ncpu=`pmprobe -v hinv.ncpu | awk '{print $3}'`
pcp-5.2.2/qa/1130-45-pcp2elasticsearch="$python `which pcp2elasticsearch`"
##############################################
pcp-5.2.2/qa/1131-7-
pcp-5.2.2/qa/1131:8:seq=`basename $0`
pcp-5.2.2/qa/1131-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1132-7-
pcp-5.2.2/qa/1132:8:seq=`basename $0`
pcp-5.2.2/qa/1132-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1133-7-
pcp-5.2.2/qa/1133:8:seq=`basename $0`
pcp-5.2.2/qa/1133-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1134-7-
pcp-5.2.2/qa/1134:8:seq=`basename $0`
pcp-5.2.2/qa/1134-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1135-8-
pcp-5.2.2/qa/1135:9:seq=`basename $0`
pcp-5.2.2/qa/1135-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1136-8-
pcp-5.2.2/qa/1136:9:seq=`basename $0`
pcp-5.2.2/qa/1136-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1137-7-
pcp-5.2.2/qa/1137:8:seq=`basename $0`
pcp-5.2.2/qa/1137-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1137-33-# real QA test starts here
pcp-5.2.2/qa/1137:34:N=`pmprobe -v hinv.ncpu | awk '{print $NF}'`
pcp-5.2.2/qa/1137-35-for m in user nice sys idle intr steal wait
##############################################
pcp-5.2.2/qa/1138-7-
pcp-5.2.2/qa/1138:8:seq=`basename $0`
pcp-5.2.2/qa/1138-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1138-42- [ $? -eq 0 ] || echo "Error running pmlogextract $IN $OUT -- see $seq.full"
pcp-5.2.2/qa/1138:43: IN=`echo $IN | sed -e 's/ /,/g'`
pcp-5.2.2/qa/1138-44-
##############################################
pcp-5.2.2/qa/1139-7-
pcp-5.2.2/qa/1139:8:seq=`basename $0`
pcp-5.2.2/qa/1139-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/114-8-
pcp-5.2.2/qa/114:9:seq=`basename $0`
pcp-5.2.2/qa/114-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/114-25-process="[k]eventd"
pcp-5.2.2/qa/114:26:ps=`ps -elf | grep $process | awk '{print $11}'`
pcp-5.2.2/qa/114-27-pcp=`pminfo -f proc.psinfo.wchan_s | grep $process \
##############################################
pcp-5.2.2/qa/1140-14-
pcp-5.2.2/qa/1140:15:seq=`basename $0`
pcp-5.2.2/qa/1140-16-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1141-7-
pcp-5.2.2/qa/1141:8:seq=`basename $0`
pcp-5.2.2/qa/1141-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1141-75- echo "Installing semodule without priority option" >> $here/$seq.full
pcp-5.2.2/qa/1141:76: error_line=`$sudo semodule -i $tmp/selinux/$policy_name.pp 2>&1 | tee -a $here/$seq.full | grep ^libsepol\. | cut -f3 -d":" |cut -f3 -d" "`
pcp-5.2.2/qa/1141-77- echo $error_line >> $here/$seq.full
##############################################
pcp-5.2.2/qa/1141-80- # install module with priority 1
pcp-5.2.2/qa/1141:81: error_line=`$sudo semodule -X 1 -i $tmp/selinux/$policy_name.pp 2>&1 | tee -a $here/$seq.full | grep ^Fail | cut -f2 -d":"`
pcp-5.2.2/qa/1141-82- echo $error_line >> $here/$seq.full
##############################################
pcp-5.2.2/qa/1142-9-
pcp-5.2.2/qa/1142:10:seq=`basename $0`
pcp-5.2.2/qa/1142-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1142-58- | sed -e 's/.* or "//' -e 's/".*//'`
pcp-5.2.2/qa/1142:59:pmcd_pid=`echo "$pmcd_full" | sed -e 's/ .*//'`
pcp-5.2.2/qa/1142:60:pmcd_trunc=`echo "$pmcd_pid" | sed -e 's/.$//'`
pcp-5.2.2/qa/1142-61-echo pmcd_full=$pmcd_full pmcd_pid=$pmcd_pid pmcd_trunc=$pmcd_trunc >>$seq.full
##############################################
pcp-5.2.2/qa/1142-64- | sed -e 's/.* or "//' -e 's/".*//' -e 1q`
pcp-5.2.2/qa/1142:65:disk_trunc=`echo "$disk_full" | sed -e 's/.$//'`
pcp-5.2.2/qa/1142-66-echo disk_full=$disk_full disk_trunc=$disk_trunc >>$seq.full
##############################################
pcp-5.2.2/qa/1142-70-for name in "$pmcd_full" \
pcp-5.2.2/qa/1142:71: `echo "$pmcd_full" | sed -e 's/ .*//'` \
pcp-5.2.2/qa/1142:72: `echo "$pmcd_full" | sed -e 's/ .*/_not_here/'` \
pcp-5.2.2/qa/1142-73- "$pmcd_trunc"
##############################################
pcp-5.2.2/qa/1142-90- "$disk_full" \
pcp-5.2.2/qa/1142:91: `echo "$disk_full" | sed -e 's/$/_not_here/'` \
pcp-5.2.2/qa/1142-92- "$disk_trunc"
##############################################
pcp-5.2.2/qa/1143-15-
pcp-5.2.2/qa/1143:16:seq=`basename $0`
pcp-5.2.2/qa/1143-17-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1144-7-
pcp-5.2.2/qa/1144:8:seq=`basename $0`
pcp-5.2.2/qa/1144-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1144-27-
pcp-5.2.2/qa/1144:28:sysoom=`cat /proc/$pid/oom_score | tr '\0' '\n'`
pcp-5.2.2/qa/1144-29-echo "PCP oom_score for process $pid is: $pcpoom" >> $seq.full
##############################################
pcp-5.2.2/qa/1145-7-
pcp-5.2.2/qa/1145:8:seq=`basename $0`
pcp-5.2.2/qa/1145-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1146-8-
pcp-5.2.2/qa/1146:9:seq=`basename $0`
pcp-5.2.2/qa/1146-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1147-8-
pcp-5.2.2/qa/1147:9:seq=`basename $0`
pcp-5.2.2/qa/1147-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1148-9-
pcp-5.2.2/qa/1148:10:seq=`basename $0`
pcp-5.2.2/qa/1148-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1149-7-
pcp-5.2.2/qa/1149:8:seq=`basename $0`
pcp-5.2.2/qa/1149-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/115-7-
pcp-5.2.2/qa/115:8:seq=`basename $0`
pcp-5.2.2/qa/115-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/115-63-host=`_get_fqdn`
pcp-5.2.2/qa/115:64:remote=`./getpmcdhosts -n 1 -L 2>$tmp.out`
pcp-5.2.2/qa/115:65:rhost=`echo $remote | sed -e 's/\..*//'`
pcp-5.2.2/qa/115:66:[ -z "$remote" ] && _notrun `cat $tmp.out`
pcp-5.2.2/qa/115-67-echo "remote=$remote" >>$here/$seq.full
pcp-5.2.2/qa/115-68-
pcp-5.2.2/qa/115:69:tmpdir=`dirname $tmp`
pcp-5.2.2/qa/115-70-
##############################################
pcp-5.2.2/qa/115-144- else
pcp-5.2.2/qa/115:145: count=`expr $count + 1`
pcp-5.2.2/qa/115-146- $PCP_PS_PROG $PCP_PS_ALL_FLAGS -p $process >>$here/$seq.full
##############################################
pcp-5.2.2/qa/115-186- pmie_was_running=true
pcp-5.2.2/qa/115:187: echo "Found pmie PID `cat $PCP_RUN_DIR/pmie.pid` running @ start" >>$here/$seq.full
pcp-5.2.2/qa/115-188- _stop_auto_restart pmie
##############################################
pcp-5.2.2/qa/115-254-echo "--- existing lock file ---" | tee -a $here/$seq.full
pcp-5.2.2/qa/115:255:case=`expr $case + 1`
pcp-5.2.2/qa/115-256-cat >$tmp.warning.$case << EOF
##############################################
pcp-5.2.2/qa/115-268-echo "--- can't create lock file ---" | tee -a $here/$seq.full
pcp-5.2.2/qa/115:269:case=`expr $case + 1`
pcp-5.2.2/qa/115-270-cat >$tmp.warning.$case << EOF
##############################################
pcp-5.2.2/qa/115-280-echo "--- bad in-line shell commands ---" | tee -a $here/$seq.full
pcp-5.2.2/qa/115:281:case=`expr $case + 1`
pcp-5.2.2/qa/115-282-cat >$tmp.warning.$case << EOF
##############################################
pcp-5.2.2/qa/115-293-echo "--- missing \$version but really v1.1 ... original control.local issue ---" | tee -a $here/$seq.full
pcp-5.2.2/qa/115:294:case=`expr $case + 1`
pcp-5.2.2/qa/115-295-cat >$tmp.warning.$case << EOF
##############################################
pcp-5.2.2/qa/115-313-echo
pcp-5.2.2/qa/115:314:case=`expr $case + 1`
pcp-5.2.2/qa/115-315-echo "--- v1.0 socks != y|n ---" | tee -a $here/$seq.full
##############################################
pcp-5.2.2/qa/115-323-echo
pcp-5.2.2/qa/115:324:case=`expr $case + 1`
pcp-5.2.2/qa/115-325-echo "--- v1.1 socks != y|n ---" | tee -a $here/$seq.full
##############################################
pcp-5.2.2/qa/115-333-echo
pcp-5.2.2/qa/115:334:case=`expr $case + 1`
pcp-5.2.2/qa/115-335-echo "--- v1.1 primary != y|n ---" | tee -a $here/$seq.full
##############################################
pcp-5.2.2/qa/115-343-echo
pcp-5.2.2/qa/115:344:case=`expr $case + 1`
pcp-5.2.2/qa/115-345-echo "--- v1.0 insufficient fields ---" | tee -a $here/$seq.full
##############################################
pcp-5.2.2/qa/115-353-echo
pcp-5.2.2/qa/115:354:case=`expr $case + 1`
pcp-5.2.2/qa/115-355-echo "--- v1.1 insufficient fields ---" | tee -a $here/$seq.full
##############################################
pcp-5.2.2/qa/115-365-chmod 000 $tmp.nogo
pcp-5.2.2/qa/115:366:case=`expr $case + 1`
pcp-5.2.2/qa/115-367-echo "--- can't create dir for logfile ---" | tee -a $here/$seq.full
##############################################
pcp-5.2.2/qa/115-375-echo
pcp-5.2.2/qa/115:376:case=`expr $case + 1`
pcp-5.2.2/qa/115-377-echo "--- can't chdir to dir for logfile ---" | tee -a $here/$seq.full
##############################################
pcp-5.2.2/qa/1150-7-
pcp-5.2.2/qa/1150:8:seq=`basename $0`
pcp-5.2.2/qa/1150-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1150-28- #
pcp-5.2.2/qa/1150:29: version=`echo $DISTRIB_RELEASE | sed -e 's/\..*//'`
pcp-5.2.2/qa/1150-30- if [ $version -lt 19 ]
##############################################
pcp-5.2.2/qa/1151-7-
pcp-5.2.2/qa/1151:8:seq=`basename $0`
pcp-5.2.2/qa/1151-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1152-7-
pcp-5.2.2/qa/1152:8:seq=`basename $0`
pcp-5.2.2/qa/1152-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1153-7-
pcp-5.2.2/qa/1153:8:seq=`basename $0`
pcp-5.2.2/qa/1153-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1154-7-
pcp-5.2.2/qa/1154:8:seq=`basename $0`
pcp-5.2.2/qa/1154-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1155-7-
pcp-5.2.2/qa/1155:8:seq=`basename $0`
pcp-5.2.2/qa/1155-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1156-7-
pcp-5.2.2/qa/1156:8:seq=`basename $0`
pcp-5.2.2/qa/1156-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1157-7-
pcp-5.2.2/qa/1157:8:seq=`basename $0`
pcp-5.2.2/qa/1157-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1158-7-
pcp-5.2.2/qa/1158:8:seq=`basename $0`
pcp-5.2.2/qa/1158-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1158-37- _found=false
pcp-5.2.2/qa/1158:38: _values=`awk '/inst.*value/ {print $NF}' $tmp.value`
pcp-5.2.2/qa/1158-39- for value in $_values
##############################################
pcp-5.2.2/qa/1159-10-
pcp-5.2.2/qa/1159:11:seq=`basename $0`
pcp-5.2.2/qa/1159-12-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/116-7-
pcp-5.2.2/qa/116:8:seq=`basename $0`
pcp-5.2.2/qa/116-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/116-33-fi
pcp-5.2.2/qa/116:34:[ "$realhost" = Unknown ] && realhost=`pmhostname $PCPQA_HYPHEN_HOST`
pcp-5.2.2/qa/116-35-
##############################################
pcp-5.2.2/qa/1160-7-
pcp-5.2.2/qa/1160:8:seq=`basename $0`
pcp-5.2.2/qa/1160-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1161-7-
pcp-5.2.2/qa/1161:8:seq=`basename $0`
pcp-5.2.2/qa/1161-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1162-7-
pcp-5.2.2/qa/1162:8:seq=`basename $0`
pcp-5.2.2/qa/1162-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1163-7-
pcp-5.2.2/qa/1163:8:seq=`basename $0`
pcp-5.2.2/qa/1163-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1164-7-
pcp-5.2.2/qa/1164:8:seq=`basename $0`
pcp-5.2.2/qa/1164-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1164-50- $sudo tar xzf $tgz
pcp-5.2.2/qa/1164:51: base=`basename $tgz`
pcp-5.2.2/qa/1164-52-
##############################################
pcp-5.2.2/qa/1165-7-
pcp-5.2.2/qa/1165:8:seq=`basename $0`
pcp-5.2.2/qa/1165-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1166-7-
pcp-5.2.2/qa/1166:8:seq=`basename $0`
pcp-5.2.2/qa/1166-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1167-8-
pcp-5.2.2/qa/1167:9:seq=`basename $0`
pcp-5.2.2/qa/1167-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1168-7-
pcp-5.2.2/qa/1168:8:seq=`basename $0`
pcp-5.2.2/qa/1168-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1169-7-
pcp-5.2.2/qa/1169:8:seq=`basename $0`
pcp-5.2.2/qa/1169-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/117-7-
pcp-5.2.2/qa/117:8:seq=`basename $0`
pcp-5.2.2/qa/117-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/117-154-
pcp-5.2.2/qa/117:155:nm=`wc -l $tmp.metrics | $PCP_AWK_PROG '{print $1}'`
pcp-5.2.2/qa/117:156:nn=`wc -l $ns2 | $PCP_AWK_PROG '{print $1}'`
pcp-5.2.2/qa/117-157-if [ $nm -lt $nn ]
##############################################
pcp-5.2.2/qa/1170-7-
pcp-5.2.2/qa/1170:8:seq=`basename $0`
pcp-5.2.2/qa/1170-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1171-7-
pcp-5.2.2/qa/1171:8:seq=`basename $0`
pcp-5.2.2/qa/1171-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1172-7-
pcp-5.2.2/qa/1172:8:seq=`basename $0`
pcp-5.2.2/qa/1172-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1173-7-
pcp-5.2.2/qa/1173:8:seq=`basename $0`
pcp-5.2.2/qa/1173-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1174-11-
pcp-5.2.2/qa/1174:12:seq=`basename $0`
pcp-5.2.2/qa/1174-13-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1175-7-
pcp-5.2.2/qa/1175:8:seq=`basename $0`
pcp-5.2.2/qa/1175-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1176-7-
pcp-5.2.2/qa/1176:8:seq=`basename $0`
pcp-5.2.2/qa/1176-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1177-8-
pcp-5.2.2/qa/1177:9:seq=`basename $0`
pcp-5.2.2/qa/1177-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1178-7-
pcp-5.2.2/qa/1178:8:seq=`basename $0`
pcp-5.2.2/qa/1178-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1179-7-
pcp-5.2.2/qa/1179:8:seq=`basename $0`
pcp-5.2.2/qa/1179-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/118-7-
pcp-5.2.2/qa/118:8:seq=`basename $0`
pcp-5.2.2/qa/118-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1180-10-
pcp-5.2.2/qa/1180:11:seq=`basename $0`
pcp-5.2.2/qa/1180-12-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1181-7-
pcp-5.2.2/qa/1181:8:seq=`basename $0`
pcp-5.2.2/qa/1181-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1182-7-
pcp-5.2.2/qa/1182:8:seq=`basename $0`
pcp-5.2.2/qa/1182-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1183-7-
pcp-5.2.2/qa/1183:8:seq=`basename $0`
pcp-5.2.2/qa/1183-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1184-7-
pcp-5.2.2/qa/1184:8:seq=`basename $0`
pcp-5.2.2/qa/1184-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1184-31-
pcp-5.2.2/qa/1184:32:source1=`pminfo -s $metric | tee -a $seq.full | awk '/Source:/ {print $2}'`
pcp-5.2.2/qa/1184:33:series1=`pminfo -s $metric | tee -a $seq.full | awk '/Series:/ {print $2}'`
pcp-5.2.2/qa/1184-34-
##############################################
pcp-5.2.2/qa/1184-38-
pcp-5.2.2/qa/1184:39:source2=`pminfo -s $metric | tee -a $seq.full | awk '/Source:/ {print $2}'`
pcp-5.2.2/qa/1184:40:series2=`pminfo -s $metric | tee -a $seq.full | awk '/Series:/ {print $2}'`
pcp-5.2.2/qa/1184-41-
##############################################
pcp-5.2.2/qa/1185-7-
pcp-5.2.2/qa/1185:8:seq=`basename $0`
pcp-5.2.2/qa/1185-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1186-14-
pcp-5.2.2/qa/1186:15:seq=`basename $0`
pcp-5.2.2/qa/1186-16-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1187-7-
pcp-5.2.2/qa/1187:8:seq=`basename $0`
pcp-5.2.2/qa/1187-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1188-7-
pcp-5.2.2/qa/1188:8:seq=`basename $0`
pcp-5.2.2/qa/1188-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1188-63- $sudo tar xzf $tgz
pcp-5.2.2/qa/1188:64: base=`basename $tgz`
pcp-5.2.2/qa/1188-65-
##############################################
pcp-5.2.2/qa/1189-7-
pcp-5.2.2/qa/1189:8:seq=`basename $0`
pcp-5.2.2/qa/1189-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1189-40-do
pcp-5.2.2/qa/1189:41: touch -t `pmdate -$delta %y%m%d%H%M.%S` $name.ago
pcp-5.2.2/qa/1189-42-done
##############################################
pcp-5.2.2/qa/119-8-
pcp-5.2.2/qa/119:9:seq=`basename $0`
pcp-5.2.2/qa/119-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/119-75-then
pcp-5.2.2/qa/119:76: for pid in `cat $tmp.pid`
pcp-5.2.2/qa/119-77- do
##############################################
pcp-5.2.2/qa/1190-9-
pcp-5.2.2/qa/1190:10:seq=`basename $0`
pcp-5.2.2/qa/1190-11-
##############################################
pcp-5.2.2/qa/1190-86- #
pcp-5.2.2/qa/1190:87: case `file "$1"`
pcp-5.2.2/qa/1190-88- in
##############################################
pcp-5.2.2/qa/1190-99- else
pcp-5.2.2/qa/1190:100: prefix=`eval echo "$2"`
pcp-5.2.2/qa/1190:101: orig=`echo "$1" | sed -e "s@^$prefix@$2@"`
pcp-5.2.2/qa/1190-102- echo "$orig ... BAD (QA text found)"
##############################################
pcp-5.2.2/qa/1190-110- else
pcp-5.2.2/qa/1190:111: prefix=`eval echo "$2"`
pcp-5.2.2/qa/1190:112: orig=`echo "$1" | sed -e "s@^$prefix@$2@"`
pcp-5.2.2/qa/1190-113- echo "$orig ... OK"
##############################################
pcp-5.2.2/qa/1190-141-_get_pids_by_name pmcd >$tmp.pids
pcp-5.2.2/qa/1190:142:n=`cat $tmp.pids | wc -l | sed -e 's/ //g'`
pcp-5.2.2/qa/1190-143-if [ "$n" -eq 1 ]
##############################################
pcp-5.2.2/qa/1190-155-$PCP_PS_PROG $PCP_PS_ALL_FLAGS | egrep '[P]ID|[p]mlogger .*-P ' >$tmp.out
pcp-5.2.2/qa/1190:156:n=`grep -v PID <$tmp.out | wc -l | sed -e 's/ //g'`
pcp-5.2.2/qa/1190-157-if [ "$n" -eq 1 ]
##############################################
pcp-5.2.2/qa/1190-166-pminfo -f pmcd.agent.status | sed -e '/^ *$/d' >$tmp.out
pcp-5.2.2/qa/1190:167:n=`grep '^ *inst .* value [1-9]' <$tmp.out | wc -l | sed -e 's/ //g'`
pcp-5.2.2/qa/1190-168-if [ "$n" -eq 0 ]
##############################################
pcp-5.2.2/qa/1190-181-$1 != last { print $1 "." $2; last = $1 }' >$tmp.1perdomain
pcp-5.2.2/qa/1190:182:pminfo -v -b1 `cat $tmp.1perdomain` \
pcp-5.2.2/qa/1190-183-| grep 'No PMCD agent for domain' >$tmp.out
pcp-5.2.2/qa/1190:184:n=`wc -l <$tmp.out | sed -e 's/ //g'`
pcp-5.2.2/qa/1190-185-if [ "$n" -eq 0 ]
##############################################
pcp-5.2.2/qa/1190-195-| grep -v 'sample.*\.bad\.unknown' >$tmp.out
pcp-5.2.2/qa/1190:196:n=`wc -l <$tmp.out | sed -e 's/ //g'`
pcp-5.2.2/qa/1190-197-if [ "$n" -eq 0 ]
##############################################
pcp-5.2.2/qa/1190-253-do
pcp-5.2.2/qa/1190:254: conf=`eval echo "$arg"`
pcp-5.2.2/qa/1190-255- if [ -f "$conf" ]
##############################################
pcp-5.2.2/qa/1191-9-
pcp-5.2.2/qa/1191:10:seq=`basename $0`
pcp-5.2.2/qa/1191-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1191-37-do
pcp-5.2.2/qa/1191:38: urlbase=`basename $file .txt | tr .- _`
pcp-5.2.2/qa/1191-39- echo 'file://'$file > $PCP_PMDAS_DIR/openmetrics/config.d/$urlbase.url
##############################################
pcp-5.2.2/qa/1192-7-
pcp-5.2.2/qa/1192:8:seq=`basename $0`
pcp-5.2.2/qa/1192-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1192-49-# real QA test starts here
pcp-5.2.2/qa/1192:50:container=`$sudo $podman run -d busybox sleep 15`
pcp-5.2.2/qa/1192-51-echo "== container: $container" >> $seq.full
##############################################
pcp-5.2.2/qa/1192-74-pmprobe --values pmcd.hostname > $tmp.host
pcp-5.2.2/qa/1192:75:container_hostname=`awk '{ print $3 }' $tmp.chost`
pcp-5.2.2/qa/1192:76:localhost_hostname=`awk '{ print $3 }' $tmp.host`
pcp-5.2.2/qa/1192-77-
##############################################
pcp-5.2.2/qa/1193-7-
pcp-5.2.2/qa/1193:8:seq=`basename $0`
pcp-5.2.2/qa/1193-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1193-27-{
pcp-5.2.2/qa/1193:28: tmpx=`echo $tmp`
pcp-5.2.2/qa/1193-29- sed -e 's/^Archive:.* Host:/ARCHIVE: Host:/' \
##############################################
pcp-5.2.2/qa/1194-7-
pcp-5.2.2/qa/1194:8:seq=`basename $0`
pcp-5.2.2/qa/1194-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1195-7-
pcp-5.2.2/qa/1195:8:seq=`basename $0`
pcp-5.2.2/qa/1195-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1195-54-do
pcp-5.2.2/qa/1195:55: d=`expr $s + 3`
pcp-5.2.2/qa/1195-56- cp $tmp/$s.index $tmp/$d.index
##############################################
pcp-5.2.2/qa/1195-69-do
pcp-5.2.2/qa/1195:70: arch=`echo "$arch" | sed -e 's/\.index$//'`
pcp-5.2.2/qa/1195-71- echo "=== $arch ==="
##############################################
pcp-5.2.2/qa/1196-8-
pcp-5.2.2/qa/1196:9:seq=`basename $0`
pcp-5.2.2/qa/1196-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1197-7-
pcp-5.2.2/qa/1197:8:seq=`basename $0`
pcp-5.2.2/qa/1197-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1197-54-do
pcp-5.2.2/qa/1197:55: d=`expr $s + 3`
pcp-5.2.2/qa/1197-56- cp $tmp/$s.index $tmp/$d.index
##############################################
pcp-5.2.2/qa/1198-8-
pcp-5.2.2/qa/1198:9:seq=`basename $0`
pcp-5.2.2/qa/1198-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1199-7-
pcp-5.2.2/qa/1199:8:seq=`basename $0`
pcp-5.2.2/qa/1199-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1199-32-pmprobe -v pmcd.datasize | tee -a $here/$seq.full >$tmp.tmp
pcp-5.2.2/qa/1199:33:start=`cat $tmp.tmp | awk '{print $3}'`
pcp-5.2.2/qa/1199-34-echo "start=$start" >>$here/$seq.full
##############################################
pcp-5.2.2/qa/1199-51-pmprobe -v pmcd.datasize | tee -a $here/$seq.full >$tmp.tmp
pcp-5.2.2/qa/1199:52:end=`cat $tmp.tmp | awk '{print $3}'`
pcp-5.2.2/qa/1199-53-echo "end=$start" >>$here/$seq.full
##############################################
pcp-5.2.2/qa/1199-60-#
pcp-5.2.2/qa/1199:61:if [ "$end" -gt "`expr $start + 128`" ]
pcp-5.2.2/qa/1199-62-then
##############################################
pcp-5.2.2/qa/120-10-
pcp-5.2.2/qa/120:11:seq=`basename $0`
pcp-5.2.2/qa/120-12-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1200-11-
pcp-5.2.2/qa/1200:12:seq=`basename $0`
pcp-5.2.2/qa/1200-13-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1200-50- sleep 1
pcp-5.2.2/qa/1200:51: _i=`expr $_i + 1`
pcp-5.2.2/qa/1200-52- else
##############################################
pcp-5.2.2/qa/1201-11-
pcp-5.2.2/qa/1201:12:seq=`basename $0`
pcp-5.2.2/qa/1201-13-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1201-52- sleep 1
pcp-5.2.2/qa/1201:53: _i=`expr $_i + 1`
pcp-5.2.2/qa/1201-54- else
##############################################
pcp-5.2.2/qa/1201-160- #
pcp-5.2.2/qa/1201:161: r=`echo $remote | sed -e 's/\..*//'`
pcp-5.2.2/qa/1201-162- if grep '"'"$r"'"' $tmp.tmp >/dev/null
##############################################
pcp-5.2.2/qa/1202-7-
pcp-5.2.2/qa/1202:8:seq=`basename $0`
pcp-5.2.2/qa/1202-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1203-7-
pcp-5.2.2/qa/1203:8:seq=`basename $0`
pcp-5.2.2/qa/1203-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1204-9-
pcp-5.2.2/qa/1204:10:seq=`basename $0`
pcp-5.2.2/qa/1204-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1205-9-
pcp-5.2.2/qa/1205:10:seq=`basename $0`
pcp-5.2.2/qa/1205-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1206-7-
pcp-5.2.2/qa/1206:8:seq=`basename $0`
pcp-5.2.2/qa/1206-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1207-7-
pcp-5.2.2/qa/1207:8:seq=`basename $0`
pcp-5.2.2/qa/1207-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1208-9-
pcp-5.2.2/qa/1208:10:seq=`basename $0`
pcp-5.2.2/qa/1208-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1209-7-
pcp-5.2.2/qa/1209:8:seq=`basename $0`
pcp-5.2.2/qa/1209-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/121-6-
pcp-5.2.2/qa/121:7:seq=`basename $0`
pcp-5.2.2/qa/121-8-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1210-7-
pcp-5.2.2/qa/1210:8:seq=`basename $0`
pcp-5.2.2/qa/1210-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1211-7-
pcp-5.2.2/qa/1211:8:seq=`basename $0`
pcp-5.2.2/qa/1211-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1211-74-echo "=> pmseries"
pcp-5.2.2/qa/1211:75:loaded=`pmseries $options "kernel.all.load{source.name:\"$here/archives/proc\"}"`
pcp-5.2.2/qa/1211-76-series=fecd5a4b4c6e1273eaa001287a6dd57b7bbd19f7
##############################################
pcp-5.2.2/qa/1211-225- tee -a $tmp.series
pcp-5.2.2/qa/1211:226:pmseries $options -a `cat $tmp.series`
pcp-5.2.2/qa/1211-227-
##############################################
pcp-5.2.2/qa/1212-7-
pcp-5.2.2/qa/1212:8:seq=`basename $0`
pcp-5.2.2/qa/1212-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1213-7-
pcp-5.2.2/qa/1213:8:seq=`basename $0`
pcp-5.2.2/qa/1213-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1214-7-
pcp-5.2.2/qa/1214:8:seq=`basename $0`
pcp-5.2.2/qa/1214-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1214-79- pmseries -p $redisport $metric | tee -a $here/$seq.full > $tmp.out
pcp-5.2.2/qa/1214:80: redis_nseries=`wc -l < $tmp.out`
pcp-5.2.2/qa/1214-81- if [ -z "$redis_nseries" -o "$redis_nseries" -le 0 ]
##############################################
pcp-5.2.2/qa/1214-89- pmseries -p $proxyport $metric | tee -a $here/$seq.full > $tmp.out
pcp-5.2.2/qa/1214:90: proxy_nseries=`wc -l < $tmp.out`
pcp-5.2.2/qa/1214-91- if [ -z "$proxy_nseries" -o "$proxy_nseries" -le 0 ]
##############################################
pcp-5.2.2/qa/1215-7-
pcp-5.2.2/qa/1215:8:seq=`basename $0`
pcp-5.2.2/qa/1215-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1216-7-
pcp-5.2.2/qa/1216:8:seq=`basename $0`
pcp-5.2.2/qa/1216-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1217-8-
pcp-5.2.2/qa/1217:9:seq=`basename $0`
pcp-5.2.2/qa/1217-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1218-7-
pcp-5.2.2/qa/1218:8:seq=`basename $0`
pcp-5.2.2/qa/1218-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1218-29-# real QA test starts here
pcp-5.2.2/qa/1218:30:pid=`_get_pids_by_name "$PCP_PMDAS_DIR/sample/pmdasample"`
pcp-5.2.2/qa/1218-31-[ -z "$pid" ] && _fail "No running pmdasample process found"
##############################################
pcp-5.2.2/qa/1219-7-
pcp-5.2.2/qa/1219:8:seq=`basename $0`
pcp-5.2.2/qa/1219-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/122-9-
pcp-5.2.2/qa/122:10:seq=`basename $0`
pcp-5.2.2/qa/122-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/122-25-#
pcp-5.2.2/qa/122:26:check=`echo a | od -x 2>&1 | sed -e 's/^0[^ ]* *//' -e 's/ //g' -e '/^$/d'`
pcp-5.2.2/qa/122-27-case "$check"
##############################################
pcp-5.2.2/qa/122-50-#
pcp-5.2.2/qa/122:51:host=`./getpmcdhosts -L -n 1 -a trace -e $want`
pcp-5.2.2/qa/122-52-if [ -z "$host" ]
##############################################
pcp-5.2.2/qa/1220-7-
pcp-5.2.2/qa/1220:8:seq=`basename $0`
pcp-5.2.2/qa/1220-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1221-10-
pcp-5.2.2/qa/1221:11:seq=`basename $0`
pcp-5.2.2/qa/1221-12-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1221-57-do
pcp-5.2.2/qa/1221:58: urlbase=`basename $file .txt | tr .- _`
pcp-5.2.2/qa/1221-59- echo 'file://'$file > $PCP_PMDAS_DIR/openmetrics/config.d/$urlbase.url
##############################################
pcp-5.2.2/qa/1222-7-
pcp-5.2.2/qa/1222:8:seq=`basename $0`
pcp-5.2.2/qa/1222-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1223-9-
pcp-5.2.2/qa/1223:10:seq=`basename $0`
pcp-5.2.2/qa/1223-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1224-7-
pcp-5.2.2/qa/1224:8:seq=`basename $0`
pcp-5.2.2/qa/1224-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1226-9-
pcp-5.2.2/qa/1226:10:seq=`basename $0`
pcp-5.2.2/qa/1226-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1227-9-
pcp-5.2.2/qa/1227:10:seq=`basename $0`
pcp-5.2.2/qa/1227-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1228-9-
pcp-5.2.2/qa/1228:10:seq=`basename $0`
pcp-5.2.2/qa/1228-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1229-9-
pcp-5.2.2/qa/1229:10:seq=`basename $0`
pcp-5.2.2/qa/1229-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1229-23-{
pcp-5.2.2/qa/1229:24: tmpx=`echo $tmp`
pcp-5.2.2/qa/1229-25- sed -e 's/^Archive:.* Host:/ARCHIVE: Host:/' \
##############################################
pcp-5.2.2/qa/123-7-
pcp-5.2.2/qa/123:8:seq=`basename $0`
pcp-5.2.2/qa/123-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1230-9-
pcp-5.2.2/qa/1230:10:seq=`basename $0`
pcp-5.2.2/qa/1230-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1231-7-
pcp-5.2.2/qa/1231:8:seq=`basename $0`
pcp-5.2.2/qa/1231-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1231-27-{
pcp-5.2.2/qa/1231:28: tmpx=`echo $tmp`
pcp-5.2.2/qa/1231-29- sed -e 's/^Archive:.* Host:/ARCHIVE: Host:/' \
##############################################
pcp-5.2.2/qa/1232-7-
pcp-5.2.2/qa/1232:8:seq=`basename $0`
pcp-5.2.2/qa/1232-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1233-7-
pcp-5.2.2/qa/1233:8:seq=`basename $0`
pcp-5.2.2/qa/1233-9-if [ $# -eq 0 ]
##############################################
pcp-5.2.2/qa/1233-97- echo
pcp-5.2.2/qa/1233:98: echo "=== `echo $config | sed -e 's;.*config\.;config.;'` ==="
pcp-5.2.2/qa/1233-99- export PCP_DERIVED_CONFIG=$config
##############################################
pcp-5.2.2/qa/1234-7-
pcp-5.2.2/qa/1234:8:seq=`basename $0`
pcp-5.2.2/qa/1234-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1235-8-
pcp-5.2.2/qa/1235:9:seq=`basename $0`
pcp-5.2.2/qa/1235-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1236-7-
pcp-5.2.2/qa/1236:8:seq=`basename $0`
pcp-5.2.2/qa/1236-9-if [ $# -eq 0 ]
##############################################
pcp-5.2.2/qa/1237-8-
pcp-5.2.2/qa/1237:9:seq=`basename $0`
pcp-5.2.2/qa/1237-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1238-7-
pcp-5.2.2/qa/1238:8:seq=`basename $0`
pcp-5.2.2/qa/1238-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1238-26-{
pcp-5.2.2/qa/1238:27: tmpx=`echo $tmp`
pcp-5.2.2/qa/1238-28- sed -e 's/^Archive:.* Host:/ARCHIVE: Host:/' \
##############################################
pcp-5.2.2/qa/1239-8-
pcp-5.2.2/qa/1239:9:seq=`basename $0`
pcp-5.2.2/qa/1239-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1239-28-{
pcp-5.2.2/qa/1239:29: tmpx=`echo $tmp`
pcp-5.2.2/qa/1239-30- sed -e 's/^Archive:.* Host:/ARCHIVE: Host:/' \
##############################################
pcp-5.2.2/qa/124-9-
pcp-5.2.2/qa/124:10:seq=`basename $0`
pcp-5.2.2/qa/124-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1240-7-
pcp-5.2.2/qa/1240:8:seq=`basename $0`
pcp-5.2.2/qa/1240-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1241-7-
pcp-5.2.2/qa/1241:8:seq=`basename $0`
pcp-5.2.2/qa/1241-9-if [ $# -eq 0 ]
##############################################
pcp-5.2.2/qa/1242-7-
pcp-5.2.2/qa/1242:8:seq=`basename $0`
pcp-5.2.2/qa/1242-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1242-28-{
pcp-5.2.2/qa/1242:29: tmpx=`echo $tmp`
pcp-5.2.2/qa/1242-30- sed -e 's/^Archive:.* Host:/ARCHIVE: Host:/' \
##############################################
pcp-5.2.2/qa/1243-7-
pcp-5.2.2/qa/1243:8:seq=`basename $0`
pcp-5.2.2/qa/1243-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1243-36-hostname=`hostname`
pcp-5.2.2/qa/1243:37:hostip=`_host_to_ipaddr $hostname`
pcp-5.2.2/qa/1243-38-localip=`_host_to_ipaddr localhost`
##############################################
pcp-5.2.2/qa/1244-7-
pcp-5.2.2/qa/1244:8:seq=`basename $0`
pcp-5.2.2/qa/1244-9-if [ $# -eq 0 ]
##############################################
pcp-5.2.2/qa/1245-7-
pcp-5.2.2/qa/1245:8:seq=`basename $0`
pcp-5.2.2/qa/1245-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1247-7-
pcp-5.2.2/qa/1247:8:seq=`basename $0`
pcp-5.2.2/qa/1247-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1247-27-{
pcp-5.2.2/qa/1247:28: tmpx=`echo $tmp`
pcp-5.2.2/qa/1247-29- sed -e 's/^Archive:.* Host:/ARCHIVE: Host:/' \
##############################################
pcp-5.2.2/qa/1248-9-
pcp-5.2.2/qa/1248:10:seq=`basename $0`
pcp-5.2.2/qa/1248-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1249-9-
pcp-5.2.2/qa/1249:10:seq=`basename $0`
pcp-5.2.2/qa/1249-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/125-8-
pcp-5.2.2/qa/125:9:seq=`basename $0`
pcp-5.2.2/qa/125-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/125-24-echo
pcp-5.2.2/qa/125:25:echo "__pmLogRead calls: `grep __pmLogRead $tmp.err | wc -l | sed -e 's/ *//g'`"
##############################################
pcp-5.2.2/qa/1250-14-
pcp-5.2.2/qa/1250:15:seq=`basename $0`
pcp-5.2.2/qa/1250-16-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1251-17-
pcp-5.2.2/qa/1251:18:seq=`basename $0`
pcp-5.2.2/qa/1251-19-if [ $# -eq 0 ]
##############################################
pcp-5.2.2/qa/1251-133- echo "=== $key ===" | tee -a $seq.full
pcp-5.2.2/qa/1251:134: lc_key=`echo "$key" | tr '[A-Z]' '[a-z']`
pcp-5.2.2/qa/1251:135: lc_altname=`echo "$altname" | tr '[A-Z]' '[a-z']`
pcp-5.2.2/qa/1251-136- _run_man_k "$key" >$tmp.out
##############################################
pcp-5.2.2/qa/1252-7-
pcp-5.2.2/qa/1252:8:seq=`basename $0`
pcp-5.2.2/qa/1252-9-if [ $# -eq 0 ]
##############################################
pcp-5.2.2/qa/1253-8-
pcp-5.2.2/qa/1253:9:seq=`basename $0`
pcp-5.2.2/qa/1253-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1254-7-
pcp-5.2.2/qa/1254:8:seq=`basename $0`
pcp-5.2.2/qa/1254-9-if [ $# -eq 0 ]
##############################################
pcp-5.2.2/qa/1255-6-#
pcp-5.2.2/qa/1255:7:seq=`basename $0`
pcp-5.2.2/qa/1255-8-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1256-8-
pcp-5.2.2/qa/1256:9:seq=`basename $0`
pcp-5.2.2/qa/1256-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1257-7-
pcp-5.2.2/qa/1257:8:seq=`basename $0`
pcp-5.2.2/qa/1257-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1258-7-
pcp-5.2.2/qa/1258:8:seq=`basename $0`
pcp-5.2.2/qa/1258-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1258-48- $sudo tar xzf $tgz
pcp-5.2.2/qa/1258:49: base=`basename $tgz`
pcp-5.2.2/qa/1258-50-
##############################################
pcp-5.2.2/qa/1259-9-
pcp-5.2.2/qa/1259:10:seq=`basename $0`
pcp-5.2.2/qa/1259-11-if [ $# -eq 0 ]
##############################################
pcp-5.2.2/qa/126-7-
pcp-5.2.2/qa/126:8:seq=`basename $0`
pcp-5.2.2/qa/126-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1260-7-
pcp-5.2.2/qa/1260:8:seq=`basename $0`
pcp-5.2.2/qa/1260-9-if [ $# -eq 0 ]
##############################################
pcp-5.2.2/qa/1261-13-
pcp-5.2.2/qa/1261:14:seq=`basename $0`
pcp-5.2.2/qa/1261-15-if [ $# -eq 0 ]
##############################################
pcp-5.2.2/qa/1262-12-
pcp-5.2.2/qa/1262:13:seq=`basename $0`
pcp-5.2.2/qa/1262-14-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1263-7-
pcp-5.2.2/qa/1263:8:seq=`basename $0`
pcp-5.2.2/qa/1263-9-if [ $# -eq 0 ]
##############################################
pcp-5.2.2/qa/1265-7-
pcp-5.2.2/qa/1265:8:seq=`basename $0`
pcp-5.2.2/qa/1265-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1265-47- $sudo tar xzf $tgz
pcp-5.2.2/qa/1265:48: base=`basename $tgz`
pcp-5.2.2/qa/1265-49-
##############################################
pcp-5.2.2/qa/1266-7-
pcp-5.2.2/qa/1266:8:seq=`basename $0`
pcp-5.2.2/qa/1266-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1267-7-
pcp-5.2.2/qa/1267:8:seq=`basename $0`
pcp-5.2.2/qa/1267-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1267-27-{
pcp-5.2.2/qa/1267:28: tmpx=`echo $tmp`
pcp-5.2.2/qa/1267-29- sed -e 's/^Archive:.* Host:/ARCHIVE: Host:/' \
##############################################
pcp-5.2.2/qa/1268-7-
pcp-5.2.2/qa/1268:8:seq=`basename $0`
pcp-5.2.2/qa/1268-9-if [ $# -eq 0 ]
##############################################
pcp-5.2.2/qa/1269-7-
pcp-5.2.2/qa/1269:8:seq=`basename $0`
pcp-5.2.2/qa/1269-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/127-7-
pcp-5.2.2/qa/127:8:seq=`basename $0`
pcp-5.2.2/qa/127-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1270-7-
pcp-5.2.2/qa/1270:8:seq=`basename $0`
pcp-5.2.2/qa/1270-9-if [ $# -eq 0 ]
##############################################
pcp-5.2.2/qa/1271-8-
pcp-5.2.2/qa/1271:9:seq=`basename $0`
pcp-5.2.2/qa/1271-10-if [ $# -eq 0 ]
##############################################
pcp-5.2.2/qa/1272-7-
pcp-5.2.2/qa/1272:8:seq=`basename $0`
pcp-5.2.2/qa/1272-9-if [ $# -eq 0 ]
##############################################
pcp-5.2.2/qa/1273-8-
pcp-5.2.2/qa/1273:9:seq=`basename $0`
pcp-5.2.2/qa/1273-10-if [ $# -eq 0 ]
##############################################
pcp-5.2.2/qa/1273-46- #
pcp-5.2.2/qa/1273:47: line=`$PCP_AWK_PROG <$tmp.log '/ t_fetch/ { print NR }' | tail -1`
pcp-5.2.2/qa/1273-48- if [ -z "$line" ]
##############################################
pcp-5.2.2/qa/1274-8-
pcp-5.2.2/qa/1274:9:seq=`basename $0`
pcp-5.2.2/qa/1274-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1274-22-{
pcp-5.2.2/qa/1274:23: tmpx=`echo $tmp`
pcp-5.2.2/qa/1274-24- sed -e 's/^Archive:.* Host:/ARCHIVE: Host:/' \
##############################################
pcp-5.2.2/qa/1275-8-
pcp-5.2.2/qa/1275:9:seq=`basename $0`
pcp-5.2.2/qa/1275-10-if [ $# -eq 0 ]
##############################################
pcp-5.2.2/qa/1276-6-#
pcp-5.2.2/qa/1276:7:seq=`basename $0`
pcp-5.2.2/qa/1276-8-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1277-9-then
pcp-5.2.2/qa/1277:10: seq=`basename $0`
pcp-5.2.2/qa/1277-11- echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1277-13- # use $seq from caller, unless not set
pcp-5.2.2/qa/1277:14: [ -n "$seq" ] || seq=`basename $0`
pcp-5.2.2/qa/1277:15: echo "QA output created by `basename $0` $*"
pcp-5.2.2/qa/1277-16-fi
##############################################
pcp-5.2.2/qa/1278-9-
pcp-5.2.2/qa/1278:10:seq=`basename $0`
pcp-5.2.2/qa/1278-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1279-9-
pcp-5.2.2/qa/1279:10:seq=`basename $0`
pcp-5.2.2/qa/1279-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/128-7-
pcp-5.2.2/qa/128:8:seq=`basename $0`
pcp-5.2.2/qa/128-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1280-9-then
pcp-5.2.2/qa/1280:10: seq=`basename $0`
pcp-5.2.2/qa/1280-11- echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1280-13- # use $seq from caller, unless not set
pcp-5.2.2/qa/1280:14: [ -n "$seq" ] || seq=`basename $0`
pcp-5.2.2/qa/1280:15: echo "QA output created by `basename $0` $*"
pcp-5.2.2/qa/1280-16-fi
##############################################
pcp-5.2.2/qa/1280-80-}'`
pcp-5.2.2/qa/1280:81:size=`expr $size - 8`
pcp-5.2.2/qa/1280-82-truncate -s $size 20180416.10.00.2
##############################################
pcp-5.2.2/qa/1281-11-then
pcp-5.2.2/qa/1281:12: seq=`basename $0`
pcp-5.2.2/qa/1281-13- echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1281-15- # use $seq from caller, unless not set
pcp-5.2.2/qa/1281:16: [ -n "$seq" ] || seq=`basename $0`
pcp-5.2.2/qa/1281:17: echo "QA output created by `basename $0` $*"
pcp-5.2.2/qa/1281-18-fi
##############################################
pcp-5.2.2/qa/1282-9-then
pcp-5.2.2/qa/1282:10: seq=`basename $0`
pcp-5.2.2/qa/1282-11- echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1282-13- # use $seq from caller, unless not set
pcp-5.2.2/qa/1282:14: [ -n "$seq" ] || seq=`basename $0`
pcp-5.2.2/qa/1282:15: echo "QA output created by `basename $0` $*"
pcp-5.2.2/qa/1282-16-fi
##############################################
pcp-5.2.2/qa/1283-9-then
pcp-5.2.2/qa/1283:10: seq=`basename $0`
pcp-5.2.2/qa/1283-11- echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1283-13- # use $seq from caller, unless not set
pcp-5.2.2/qa/1283:14: [ -n "$seq" ] || seq=`basename $0`
pcp-5.2.2/qa/1283:15: echo "QA output created by `basename $0` $*"
pcp-5.2.2/qa/1283-16-fi
##############################################
pcp-5.2.2/qa/1284-9-then
pcp-5.2.2/qa/1284:10: seq=`basename $0`
pcp-5.2.2/qa/1284-11- echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1284-13- # use $seq from caller, unless not set
pcp-5.2.2/qa/1284:14: [ -n "$seq" ] || seq=`basename $0`
pcp-5.2.2/qa/1284:15: echo "QA output created by `basename $0` $*"
pcp-5.2.2/qa/1284-16-fi
##############################################
pcp-5.2.2/qa/1287-11-#
pcp-5.2.2/qa/1287:12:seq=`basename $0`
pcp-5.2.2/qa/1287-13-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1287-40- file=$here/openmetrics/samples/simple_metric.txt
pcp-5.2.2/qa/1287:41: urlbase=`basename $file .txt | tr .- _`
pcp-5.2.2/qa/1287-42- echo 'file://'$file > $PCP_PMDAS_DIR/openmetrics/config.d/$urlbase$i.url
##############################################
pcp-5.2.2/qa/1289-7-
pcp-5.2.2/qa/1289:8:seq=`basename $0`
pcp-5.2.2/qa/1289-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1289-24-{
pcp-5.2.2/qa/1289:25: tmpx=`echo $tmp`
pcp-5.2.2/qa/1289-26- sed -e 's/^archive:.*/archive: ARCHIVE/' \
##############################################
pcp-5.2.2/qa/129-7-
pcp-5.2.2/qa/129:8:seq=`basename $0`
pcp-5.2.2/qa/129-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1294-7-
pcp-5.2.2/qa/1294:8:seq=`basename $0`
pcp-5.2.2/qa/1294-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1297-7-
pcp-5.2.2/qa/1297:8:seq=`basename $0`
pcp-5.2.2/qa/1297-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1299-7-
pcp-5.2.2/qa/1299:8:seq=`basename $0`
pcp-5.2.2/qa/1299-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/130-7-
pcp-5.2.2/qa/130:8:seq=`basename $0`
pcp-5.2.2/qa/130-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1301-7-
pcp-5.2.2/qa/1301:8:seq=`basename $0`
pcp-5.2.2/qa/1301-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1303-7-
pcp-5.2.2/qa/1303:8:seq=`basename $0`
pcp-5.2.2/qa/1303-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1304-7-
pcp-5.2.2/qa/1304:8:seq=`basename $0`
pcp-5.2.2/qa/1304-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1304-33-pmstat --interval 0.2 --samples 3 >$tmp.out 2>$tmp.err
pcp-5.2.2/qa/1304:34:out=`cat $tmp.out`
pcp-5.2.2/qa/1304-35-[ -z "$out" ] || echo "Got pmstat output on stdout"
pcp-5.2.2/qa/1304:36:err=`cat $tmp.err`
pcp-5.2.2/qa/1304-37-[ -z "$err" ] || echo "Got pmstat output on stderr"
##############################################
pcp-5.2.2/qa/1306-6-#
pcp-5.2.2/qa/1306:7:seq=`basename $0`
pcp-5.2.2/qa/1306-8-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1306-52-file=$here/openmetrics/samples/labelfiltering.txt
pcp-5.2.2/qa/1306:53:urlbase=`basename $file .txt | tr .- _`
pcp-5.2.2/qa/1306-54-echo 'file://'$file > $PCP_PMDAS_DIR/openmetrics/config.d/$urlbase.url
##############################################
pcp-5.2.2/qa/131-7-
pcp-5.2.2/qa/131:8:seq=`basename $0`
pcp-5.2.2/qa/131-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1310-7-
pcp-5.2.2/qa/1310:8:seq=`basename $0`
pcp-5.2.2/qa/1310-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1318-7-
pcp-5.2.2/qa/1318:8:seq=`basename $0`
pcp-5.2.2/qa/1318-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/132-7-
pcp-5.2.2/qa/132:8:seq=`basename $0`
pcp-5.2.2/qa/132-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1321-4-
pcp-5.2.2/qa/1321:5:seq=`basename $0`
pcp-5.2.2/qa/1321-6-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1321-48- # echo;echo == curl URL returns
pcp-5.2.2/qa/1321:49: # curl -G -s `cat $_url` || exit 1
pcp-5.2.2/qa/1321-50-}
##############################################
pcp-5.2.2/qa/1323-7-
pcp-5.2.2/qa/1323:8:seq=`basename $0`
pcp-5.2.2/qa/1323-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1323-27-{
pcp-5.2.2/qa/1323:28: tmpx=`echo $tmp`
pcp-5.2.2/qa/1323-29- sed -e 's/^Archive:.* Host:/ARCHIVE: Host:/' \
##############################################
pcp-5.2.2/qa/1324-7-
pcp-5.2.2/qa/1324:8:seq=`basename $0`
pcp-5.2.2/qa/1324-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1324-24-{
pcp-5.2.2/qa/1324:25: tmpx=`echo $tmp`
pcp-5.2.2/qa/1324-26- sed -e 's/^Archive:.* Host:/ARCHIVE: Host:/' \
##############################################
pcp-5.2.2/qa/1326-7-
pcp-5.2.2/qa/1326:8:seq=`basename $0`
pcp-5.2.2/qa/1326-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1326-26-# real QA test starts here
pcp-5.2.2/qa/1326:27:old=`pmprobe -v pmcd.seqnum | $PCP_AWK_PROG '$2 == 1 { print $3 }'`
pcp-5.2.2/qa/1326-28-if [ -z "$old" ]
##############################################
pcp-5.2.2/qa/1326-34-
pcp-5.2.2/qa/1326:35:new=`expr $old + 1`
pcp-5.2.2/qa/1326-36-echo "old=$old" >>$seq.full
##############################################
pcp-5.2.2/qa/133-7-
pcp-5.2.2/qa/133:8:seq=`basename $0`
pcp-5.2.2/qa/133-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/133-75-# be careful of $tmp.pid $tmp.err $tmp.cmd and so on from earlier
pcp-5.2.2/qa/133:76:nfile=`echo $tmp.[0-9]* ${tmp}.*index ${tmp}.*meta | wc -w | tr -d ' '`
pcp-5.2.2/qa/133-77-echo "Created $nfile archive pieces."
##############################################
pcp-5.2.2/qa/1330-8-
pcp-5.2.2/qa/1330:9:seq=`basename $0`
pcp-5.2.2/qa/1330-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1330-88-do
pcp-5.2.2/qa/1330:89: pminfo -b 10000000 -tf `pminfo openmetrics.source$i | LC_COLLATE=POSIX sort`
pcp-5.2.2/qa/1330:90: pminfo -b 10000000 -tf `pminfo openmetrics.source$i | LC_COLLATE=POSIX sort`
pcp-5.2.2/qa/1330:91: pminfo -b 10000000 -tf `pminfo openmetrics.source$i | LC_COLLATE=POSIX sort`
pcp-5.2.2/qa/1330:92: pminfo -b 10000000 -tf `pminfo openmetrics.source$i | LC_COLLATE=POSIX sort`
pcp-5.2.2/qa/1330-93- sleep 0.5
##############################################
pcp-5.2.2/qa/1331-7-
pcp-5.2.2/qa/1331:8:seq=`basename $0`
pcp-5.2.2/qa/1331-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1331-35- pkg-config --modversion $module >$tmp.out 2>$tmp.err
pcp-5.2.2/qa/1331:36: version=`cat $tmp.out`
pcp-5.2.2/qa/1331-37- if [ "$version" != "$PCP_VERSION" ]
##############################################
pcp-5.2.2/qa/1337-8-
pcp-5.2.2/qa/1337:9:seq=`basename $0`
pcp-5.2.2/qa/1337-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1337-22-# extract username and password, check connection to SQL Server
pcp-5.2.2/qa/1337:23:eval `$sudo egrep 'server=|username=|password=' "$PCP_PMDAS_DIR/mssql/mssql.conf"`
pcp-5.2.2/qa/1337-24-test -n "$server" || _notrun "Cannot find SQL Server connection setting"
##############################################
pcp-5.2.2/qa/1337-33-grep -q '(1 rows affected)' $tmp.query || \
pcp-5.2.2/qa/1337:34: _notrun "Cannot perform a basic select query on $server - got:" `cat $tmp.out`
pcp-5.2.2/qa/1337-35-
##############################################
pcp-5.2.2/qa/1337-51-
pcp-5.2.2/qa/1337:52: sqlvalue=`awk '/SQLServer:/ { print $(NF-1) }' $sql`
pcp-5.2.2/qa/1337:53: pcpvalue=`awk '{print $NF}' $pcp`
pcp-5.2.2/qa/1337-54-
##############################################
pcp-5.2.2/qa/1337-96-# verify metrics compating PCP values to sqlcmd queries
pcp-5.2.2/qa/1337:97:_query "select * from sys.dm_os_performance_counters where object_name = 'SQLServer:General Statistics' and counter_name = 'Active Temp Tables'" > $tmp.sql_active_temp_tables
pcp-5.2.2/qa/1337-98-pmprobe -v mssql.general.active_temp_tables > $tmp.pcp_active_temp_tables
##############################################
pcp-5.2.2/qa/1337-100-
pcp-5.2.2/qa/1337:101:_query "select * from sys.dm_os_performance_counters where object_name = 'SQLServer:General Statistics' and counter_name = 'Logins/sec'" > $tmp.sql_logins
pcp-5.2.2/qa/1337-102-pmprobe -v mssql.general.logins > $tmp.pcp_logins
##############################################
pcp-5.2.2/qa/1337-104-
pcp-5.2.2/qa/1337:105:_query "select * from sys.dm_os_performance_counters where object_name = 'SQLServer:General Statistics' and counter_name = 'Logouts/sec'" > $tmp.sql_logouts
pcp-5.2.2/qa/1337-106-pmprobe -v mssql.general.logouts > $tmp.pcp_logouts
##############################################
pcp-5.2.2/qa/1337-108-
pcp-5.2.2/qa/1337:109:_query "select * from sys.dm_os_performance_counters where object_name = 'SQLServer:Latches ' and counter_name = 'Latch Waits/sec'" > $tmp.sql_latch_waits
pcp-5.2.2/qa/1337-110-pmprobe -v mssql.latches.latch_waits > $tmp.pcp_latch_waits
##############################################
pcp-5.2.2/qa/1338-8-
pcp-5.2.2/qa/1338:9:seq=`basename $0`
pcp-5.2.2/qa/1338-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1338-28-{
pcp-5.2.2/qa/1338:29: tmpx=`echo $tmp`
pcp-5.2.2/qa/1338-30- sed -e 's/^Archive:.* Host:/ARCHIVE: Host:/' \
##############################################
pcp-5.2.2/qa/134-7-
pcp-5.2.2/qa/134:8:seq=`basename $0`
pcp-5.2.2/qa/134-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/134-20-{
pcp-5.2.2/qa/134:21: eval `cat $tmp.last`
pcp-5.2.2/qa/134-22- $PCP_AWK_PROG '
##############################################
pcp-5.2.2/qa/134-60-END { print "l0=" l0 " l1=" l1 >"'$tmp.last'" }'
pcp-5.2.2/qa/134:61: echo "end _do_ls $tmp.last: `cat $tmp.last`" >>$seq.full
pcp-5.2.2/qa/134-62-
##############################################
pcp-5.2.2/qa/134-66-{
pcp-5.2.2/qa/134:67: tstamp=`wc -l <$tmp.sed | sed -e 's/ *//g'`
pcp-5.2.2/qa/134:68: tstamp=`expr $tstamp - 2`
pcp-5.2.2/qa/134-69- sed >$tmp.tmp \
##############################################
pcp-5.2.2/qa/134-85- echo "s/$time/TIMESTAMP-$tstamp/g" >>$tmp.sed
pcp-5.2.2/qa/134:86: tstamp=`expr $tstamp + 1`
pcp-5.2.2/qa/134-87- fi
##############################################
pcp-5.2.2/qa/134-108-echo "l0=0 l1=0" >$tmp.last
pcp-5.2.2/qa/134:109:echo "init $tmp.last: `cat $tmp.last`" >>$seq.full
pcp-5.2.2/qa/134-110-
##############################################
pcp-5.2.2/qa/1340-7-
pcp-5.2.2/qa/1340:8:seq=`basename $0`
pcp-5.2.2/qa/1340-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1342-6-#
pcp-5.2.2/qa/1342:7:seq=`basename $0`
pcp-5.2.2/qa/1342-8-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1342-35-do
pcp-5.2.2/qa/1342:36: urlbase=`basename $file .txt | tr .- _`
pcp-5.2.2/qa/1342-37- echo 'file://'$file > $PCP_PMDAS_DIR/openmetrics/config.d/$urlbase.url
##############################################
pcp-5.2.2/qa/1343-7-
pcp-5.2.2/qa/1343:8:seq=`basename $0`
pcp-5.2.2/qa/1343-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1343-22-{
pcp-5.2.2/qa/1343:23: device=`$sudo losetup -a | grep "$tmp.xfsfile" | cut -f1 -d":"`
pcp-5.2.2/qa/1343-24- cd $here
##############################################
pcp-5.2.2/qa/1343-29- do
pcp-5.2.2/qa/1343:30: loopcount=`$sudo losetup -a | grep "$tmp.xfsfile" | wc -l`
pcp-5.2.2/qa/1343-31- [ $loopcount -eq 0 ] && break
##############################################
pcp-5.2.2/qa/1343-136- rm -f $tmp.ok
pcp-5.2.2/qa/1343:137: i=`expr $i + 1`
pcp-5.2.2/qa/1343-138- echo "pmlogger probe #$i `date`" >>$seq.full
##############################################
pcp-5.2.2/qa/1343-179-# there should be only two; one merged and one just-written-to
pcp-5.2.2/qa/1343:180:count=`ls -1 $tmp.xfsmount/$hostname/*.meta | grep -v reduced| wc -l`
pcp-5.2.2/qa/1343-181-if [ $count -lt 3 ]; then
##############################################
pcp-5.2.2/qa/1343-222-# make sure that some occured
pcp-5.2.2/qa/1343:223:retention_count=`cat $tmp.out | grep "retention" | wc -l`
pcp-5.2.2/qa/1343-224-echo $retention_count >> $seq.full
##############################################
pcp-5.2.2/qa/1344-7-
pcp-5.2.2/qa/1344:8:seq=`basename $0`
pcp-5.2.2/qa/1344-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1347-8-
pcp-5.2.2/qa/1347:9:seq=`basename $0`
pcp-5.2.2/qa/1347-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1349-8-
pcp-5.2.2/qa/1349:9:seq=`basename $0`
pcp-5.2.2/qa/1349-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1349-28-{
pcp-5.2.2/qa/1349:29: tmpx=`echo $tmp`
pcp-5.2.2/qa/1349-30- sed -e 's/^Archive:.* Host:/ARCHIVE: Host:/' \
##############################################
pcp-5.2.2/qa/135-7-
pcp-5.2.2/qa/135:8:seq=`basename $0`
pcp-5.2.2/qa/135-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/135-20-{
pcp-5.2.2/qa/135:21: tstamp=`wc -l <$tmp.sed | sed -e 's/ *//g'`
pcp-5.2.2/qa/135:22: tstamp=`expr $tstamp - 2`
pcp-5.2.2/qa/135-23- sed >$tmp.tmp \
##############################################
pcp-5.2.2/qa/135-39- echo "s/$time/TIMESTAMP-$tstamp/g" >>$tmp.sed
pcp-5.2.2/qa/135:40: tstamp=`expr $tstamp + 1`
pcp-5.2.2/qa/135-41- fi
##############################################
pcp-5.2.2/qa/1350-8-
pcp-5.2.2/qa/1350:9:seq=`basename $0`
pcp-5.2.2/qa/1350-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1350-30-echo "=> $$" >> $seq.full
pcp-5.2.2/qa/1350:31:nvctxw=`pminfo -f proc.psinfo.vctxsw | tee -a $seq.full | fgrep $$ | awk '{print $NF}'`
pcp-5.2.2/qa/1350-32-echo "=> $nvctxw" >> $seq.full
##############################################
pcp-5.2.2/qa/1351-8-
pcp-5.2.2/qa/1351:9:seq=`basename $0`
pcp-5.2.2/qa/1351-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1354-7-
pcp-5.2.2/qa/1354:8:seq=`basename $0`
pcp-5.2.2/qa/1354-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1357-7-
pcp-5.2.2/qa/1357:8:seq=`basename $0`
pcp-5.2.2/qa/1357-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1357-50-# real QA test starts here
pcp-5.2.2/qa/1357:51:container=`$podman run -d busybox sleep 10`
pcp-5.2.2/qa/1357-52-echo "== container: $container" >> $here/$seq.full
pcp-5.2.2/qa/1357-53-[ -z "$container" ] && _fail "Failed to create container"
pcp-5.2.2/qa/1357:54:pod=`$podman pod create`
pcp-5.2.2/qa/1357-55-echo "== pod: $pod" >> $here/$seq.full
##############################################
pcp-5.2.2/qa/1358-7-
pcp-5.2.2/qa/1358:8:seq=`basename $0`
pcp-5.2.2/qa/1358-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1358-85-# create some new podman containers
pcp-5.2.2/qa/1358:86:container1=`$podman run -d busybox sleep 10`
pcp-5.2.2/qa/1358-87-echo "== container1: $container1" >> $here/$seq.full
pcp-5.2.2/qa/1358:88:container2=`$podman run -d busybox sleep 10`
pcp-5.2.2/qa/1358-89-echo "== container2: $container2" >> $here/$seq.full
##############################################
pcp-5.2.2/qa/1358-92-# create some new podman pods
pcp-5.2.2/qa/1358:93:pod1=`$podman pod create`
pcp-5.2.2/qa/1358-94-echo "== pod1: $pod1" >> $here/$seq.full
pcp-5.2.2/qa/1358:95:pod2=`$podman pod create`
pcp-5.2.2/qa/1358-96-echo "== pod2: $pod2" >> $here/$seq.full
##############################################
pcp-5.2.2/qa/1359-8-
pcp-5.2.2/qa/1359:9:seq=`basename $0`
pcp-5.2.2/qa/1359-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/136-7-
pcp-5.2.2/qa/136:8:seq=`basename $0`
pcp-5.2.2/qa/136-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/136-35-{
pcp-5.2.2/qa/136:36: tstamp=`wc -l <$tmp.sed | sed -e 's/ *//g'`
pcp-5.2.2/qa/136:37: tstamp=`expr $tstamp - 2`
pcp-5.2.2/qa/136-38- sed >$tmp.tmp \
##############################################
pcp-5.2.2/qa/136-50- echo "s/$time/TIMESTAMP-$tstamp/g" >>$tmp.sed
pcp-5.2.2/qa/136:51: tstamp=`expr $tstamp + 1`
pcp-5.2.2/qa/136-52- fi
##############################################
pcp-5.2.2/qa/1362-35-
pcp-5.2.2/qa/1362:36:seq=`basename $0`
pcp-5.2.2/qa/1362-37-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1367-6-#
pcp-5.2.2/qa/1367:7:seq=`basename $0`
pcp-5.2.2/qa/1367-8-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1367-17-
pcp-5.2.2/qa/1367:18:python_path=`which $python`
pcp-5.2.2/qa/1367-19-trap "rm -f $tmp.*; exit" 0 1 2 3 15
##############################################
pcp-5.2.2/qa/1368-7-
pcp-5.2.2/qa/1368:8:seq=`basename $0`
pcp-5.2.2/qa/1368-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1369-7-
pcp-5.2.2/qa/1369:8:seq=`basename $0`
pcp-5.2.2/qa/1369-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/137-7-
pcp-5.2.2/qa/137:8:seq=`basename $0`
pcp-5.2.2/qa/137-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1372-7-
pcp-5.2.2/qa/1372:8:seq=`basename $0`
pcp-5.2.2/qa/1372-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1379-7-
pcp-5.2.2/qa/1379:8:seq=`basename $0`
pcp-5.2.2/qa/1379-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1379-125-
pcp-5.2.2/qa/1379:126:context="context=`cat $tmp.context`"
pcp-5.2.2/qa/1379-127-metrics='names=sample.long.one,sample.long.million'
##############################################
pcp-5.2.2/qa/138-7-
pcp-5.2.2/qa/138:8:seq=`basename $0`
pcp-5.2.2/qa/138-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1383-8-
pcp-5.2.2/qa/1383:9:seq=`basename $0`
pcp-5.2.2/qa/1383-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1383-28-{
pcp-5.2.2/qa/1383:29: tmpx=`echo $tmp`
pcp-5.2.2/qa/1383-30- sed -e 's/^Archive:.* Host:/ARCHIVE: Host:/' \
##############################################
pcp-5.2.2/qa/1385-11-
pcp-5.2.2/qa/1385:12:seq=`basename $0`
pcp-5.2.2/qa/1385-13-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1385-97-do
pcp-5.2.2/qa/1385:98: pminfo -b 10000000 -tf `pminfo openmetrics.source$i | LC_COLLATE=POSIX sort`
pcp-5.2.2/qa/1385:99: pminfo -b 10000000 -tf `pminfo openmetrics.source$i | LC_COLLATE=POSIX sort`
pcp-5.2.2/qa/1385:100: pminfo -b 10000000 -tf `pminfo openmetrics.source$i | LC_COLLATE=POSIX sort`
pcp-5.2.2/qa/1385-101- pmsleep 0.0005
##############################################
pcp-5.2.2/qa/1388-13-
pcp-5.2.2/qa/1388:14:seq=`basename $0`
pcp-5.2.2/qa/1388-15-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/139-7-
pcp-5.2.2/qa/139:8:seq=`basename $0`
pcp-5.2.2/qa/139-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1390-7-
pcp-5.2.2/qa/1390:8:seq=`basename $0`
pcp-5.2.2/qa/1390-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1393-8-
pcp-5.2.2/qa/1393:9:seq=`basename $0`
pcp-5.2.2/qa/1393-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1395-11-
pcp-5.2.2/qa/1395:12:seq=`basename $0`
pcp-5.2.2/qa/1395-13-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1395-96-do
pcp-5.2.2/qa/1395:97: pminfo -b 10000000 -tf `pminfo openmetrics.source$i | LC_COLLATE=POSIX sort`
pcp-5.2.2/qa/1395:98: pminfo -b 10000000 -tf `pminfo openmetrics.source$i | LC_COLLATE=POSIX sort`
pcp-5.2.2/qa/1395:99: pminfo -b 10000000 -tf `pminfo openmetrics.source$i | LC_COLLATE=POSIX sort`
pcp-5.2.2/qa/1395:100: pminfo -b 10000000 -tf `pminfo openmetrics.source$i | LC_COLLATE=POSIX sort`
pcp-5.2.2/qa/1395-101- sleep 0.5
##############################################
pcp-5.2.2/qa/1396-7-
pcp-5.2.2/qa/1396:8:seq=`basename $0`
pcp-5.2.2/qa/1396-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1397-7-
pcp-5.2.2/qa/1397:8:seq=`basename $0`
pcp-5.2.2/qa/1397-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1397-52-pmda=$PCP_PMDAS_DIR/smart/pmda_smart.so,smart_init
pcp-5.2.2/qa/1397:53:metrics=`pminfo -L -K clear -K add,150,$pmda smart | LC_COLLATE=POSIX sort`
pcp-5.2.2/qa/1397-54-memcheck="smart.health smart.info.capacity_bytes smart.attributes.power_off_retract_count.worst smart.nvme_attributes.data_units_read"
##############################################
pcp-5.2.2/qa/1397-63- $sudo tar xzf $tgz
pcp-5.2.2/qa/1397:64: base=`basename $tgz`
pcp-5.2.2/qa/1397:65: count=`echo $base | sed -e 's,.*-root-,,g' -e 's,.tgz$,,g'`
pcp-5.2.2/qa/1397-66- cd $count/smart
##############################################
pcp-5.2.2/qa/1398-7-
pcp-5.2.2/qa/1398:8:seq=`basename $0`
pcp-5.2.2/qa/1398-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1399-7-
pcp-5.2.2/qa/1399:8:seq=`basename $0`
pcp-5.2.2/qa/1399-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/140-7-
pcp-5.2.2/qa/140:8:seq=`basename $0`
pcp-5.2.2/qa/140-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1400-7-
pcp-5.2.2/qa/1400:8:seq=`basename $0`
pcp-5.2.2/qa/1400-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1401-9-
pcp-5.2.2/qa/1401:10:seq=`basename $0`
pcp-5.2.2/qa/1401-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1403-7-
pcp-5.2.2/qa/1403:8:seq=`basename $0`
pcp-5.2.2/qa/1403-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1403-53- $sudo tar xzf $tgz
pcp-5.2.2/qa/1403:54: base=`basename $tgz`
pcp-5.2.2/qa/1403-55-
##############################################
pcp-5.2.2/qa/1407-7-
pcp-5.2.2/qa/1407:8:seq=`basename $0`
pcp-5.2.2/qa/1407-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1408-7-
pcp-5.2.2/qa/1408:8:seq=`basename $0`
pcp-5.2.2/qa/1408-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/141-7-
pcp-5.2.2/qa/141:8:seq=`basename $0`
pcp-5.2.2/qa/141-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1415-7-
pcp-5.2.2/qa/1415:8:seq=`basename $0`
pcp-5.2.2/qa/1415-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1416-7-
pcp-5.2.2/qa/1416:8:seq=`basename $0`
pcp-5.2.2/qa/1416-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/142-13-
pcp-5.2.2/qa/142:14:seq=`basename $0`
pcp-5.2.2/qa/142-15-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/142-28-
pcp-5.2.2/qa/142:29:echo "Samples: `pmdumplog $tmp | grep '^[0-2]' | wc -l | sed -e 's/ //g'`"
pcp-5.2.2/qa/142-30-
##############################################
pcp-5.2.2/qa/1422-7-
pcp-5.2.2/qa/1422:8:seq=`basename $0`
pcp-5.2.2/qa/1422-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1423-6-#
pcp-5.2.2/qa/1423:7:seq=`basename $0`
pcp-5.2.2/qa/1423-8-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/143-7-
pcp-5.2.2/qa/143:8:seq=`basename $0`
pcp-5.2.2/qa/143-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1433-7-
pcp-5.2.2/qa/1433:8:seq=`basename $0`
pcp-5.2.2/qa/1433-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1434-7-
pcp-5.2.2/qa/1434:8:seq=`basename $0`
pcp-5.2.2/qa/1434-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1434-48-
pcp-5.2.2/qa/1434:49:cases=`ls -1 $tmp.pmcd.conf.* | sed -e 's/.*pmcd.conf.//g' | LC_COLLATE=POSIX sort`
pcp-5.2.2/qa/1434-50-for case in $cases
##############################################
pcp-5.2.2/qa/1435-7-
pcp-5.2.2/qa/1435:8:seq=`basename $0`
pcp-5.2.2/qa/1435-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1435-48-
pcp-5.2.2/qa/1435:49:cases=`ls -1 $tmp.pmcd.conf.* | sed -e 's/.*pmcd.conf.//g' | LC_COLLATE=POSIX sort`
pcp-5.2.2/qa/1435-50-for case in $cases
##############################################
pcp-5.2.2/qa/1436-7-
pcp-5.2.2/qa/1436:8:seq=`basename $0`
pcp-5.2.2/qa/1436-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1436-66-
pcp-5.2.2/qa/1436:67:cases=`ls -1 $tmp.pmcd.conf.* | sed -e 's/.*pmcd.conf.//g' | LC_COLLATE=POSIX sort`
pcp-5.2.2/qa/1436-68-for case in $cases
##############################################
pcp-5.2.2/qa/1436-79-output="$PCP_PMDAS_DIR/postgresql/pmdapostgresql.conf"
pcp-5.2.2/qa/1436:80:perlcases=`ls -1 $tmp.perl.conf.* | sed -e 's/.*perl.conf.//g' | LC_COLLATE=POSIX sort`
pcp-5.2.2/qa/1436-81-for perlcase in $perlcases
##############################################
pcp-5.2.2/qa/1437-7-
pcp-5.2.2/qa/1437:8:seq=`basename $0`
pcp-5.2.2/qa/1437-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1437-47-
pcp-5.2.2/qa/1437:48:cases=`ls -1 $tmp.pmcd.conf.* | sed -e 's/.*pmcd.conf.//g' | LC_COLLATE=POSIX sort`
pcp-5.2.2/qa/1437-49-for case in $cases
##############################################
pcp-5.2.2/qa/144-6-
pcp-5.2.2/qa/144:7:seq=`basename $0`
pcp-5.2.2/qa/144-8-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/144-31-nch_in=`wc -c <archives/naslog.0 | sed -e 's/ //g'`
pcp-5.2.2/qa/144:32:nch_out=`wc -c <$tmp.0 | sed -e 's/ //g'`
pcp-5.2.2/qa/144:33:echo "Data reduction: `echo scale=4\\;$nch_out/$nch_in | bc`"
pcp-5.2.2/qa/144-34-
##############################################
pcp-5.2.2/qa/145-7-
pcp-5.2.2/qa/145:8:seq=`basename $0`
pcp-5.2.2/qa/145-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1455-8-
pcp-5.2.2/qa/1455:9:seq=`basename $0`
pcp-5.2.2/qa/1455-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1455-28-{
pcp-5.2.2/qa/1455:29: tmpx=`echo $tmp`
pcp-5.2.2/qa/1455-30- sed -e 's/^Archive:.* Host:/ARCHIVE: Host:/' \
##############################################
pcp-5.2.2/qa/1457-7-
pcp-5.2.2/qa/1457:8:seq=`basename $0`
pcp-5.2.2/qa/1457-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1457-129- sleep 1
pcp-5.2.2/qa/1457:130: i=`expr $i + 1`
pcp-5.2.2/qa/1457-131-done
##############################################
pcp-5.2.2/qa/146-7-
pcp-5.2.2/qa/146:8:seq=`basename $0`
pcp-5.2.2/qa/146-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/147-7-
pcp-5.2.2/qa/147:8:seq=`basename $0`
pcp-5.2.2/qa/147-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/148-7-
pcp-5.2.2/qa/148:8:seq=`basename $0`
pcp-5.2.2/qa/148-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1480-7-
pcp-5.2.2/qa/1480:8:seq=`basename $0`
pcp-5.2.2/qa/1480-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1489-7-
pcp-5.2.2/qa/1489:8:seq=`basename $0`
pcp-5.2.2/qa/1489-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/149-7-
pcp-5.2.2/qa/149:8:seq=`basename $0`
pcp-5.2.2/qa/149-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1490-6-#
pcp-5.2.2/qa/1490:7:seq=`basename $0`
pcp-5.2.2/qa/1490-8-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1495-8-
pcp-5.2.2/qa/1495:9:seq=`basename $0`
pcp-5.2.2/qa/1495-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1495-28-{
pcp-5.2.2/qa/1495:29: tmpx=`echo $tmp`
pcp-5.2.2/qa/1495-30- sed -e 's/^Archive:.* Host:/ARCHIVE: Host:/' \
##############################################
pcp-5.2.2/qa/150-8-
pcp-5.2.2/qa/150:9:seq=`basename $0`
pcp-5.2.2/qa/150-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/151-8-
pcp-5.2.2/qa/151:9:seq=`basename $0`
pcp-5.2.2/qa/151-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/151-88- now_hr=`pmdate %H`
pcp-5.2.2/qa/151:89: hr_set=`expr $hour - $now_hr`
pcp-5.2.2/qa/151-90- [ "$hr_set" -ge 0 ] && hr_set="+$hr_set"
pcp-5.2.2/qa/151-91- now_min=`pmdate %M`
pcp-5.2.2/qa/151:92: min_set10=`expr 10 - $now_min`
pcp-5.2.2/qa/151-93- [ "$min_set10" -ge 0 ] && min_set10="+$min_set10"
pcp-5.2.2/qa/151:94: min_set20=`expr 20 - $now_min`
pcp-5.2.2/qa/151-95- [ "$min_set20" -ge 0 ] && min_set20="+$min_set20"
pcp-5.2.2/qa/151:96: min_set30=`expr 30 - $now_min`
pcp-5.2.2/qa/151-97- [ "$min_set30" -ge 0 ] && min_set30="+$min_set30"
pcp-5.2.2/qa/151:98: namea=`pmdate -${day}d ${hr_set}H ${min_set10}M %Y%m%d.%H.%M`
pcp-5.2.2/qa/151:99: nameb=`pmdate -${day}d ${hr_set}H ${min_set20}M %Y%m%d.%H.%M`
pcp-5.2.2/qa/151:100: namec=`pmdate -${day}d ${hr_set}H ${min_set30}M %Y%m%d.%H.%M`
pcp-5.2.2/qa/151:101: stampa=`echo $namea | sed -e 's/\.//g'`
pcp-5.2.2/qa/151:102: stampb=`echo $nameb | sed -e 's/\.//g'`
pcp-5.2.2/qa/151:103: stampc=`echo $namec | sed -e 's/\.//g'`
pcp-5.2.2/qa/151-104- nameb=${namea}-00
##############################################
pcp-5.2.2/qa/151-122- done
pcp-5.2.2/qa/151:123: echo "s/`pmdate -${day}d ${hr_set}H ${min_set10}M %Y%m%d`/TODAY-$day/g" >>$tmp/sed
pcp-5.2.2/qa/151-124-done
##############################################
pcp-5.2.2/qa/151-133- now_min=`pmdate %M`
pcp-5.2.2/qa/151:134: min_set=`expr 10 - $now_min`
pcp-5.2.2/qa/151-135- [ "$min_set" -ge 0 ] && min_set="+$min_set"
pcp-5.2.2/qa/151:136: namea=`pmdate -${day}d ${hr_set}H ${min_set}M %Y%m%d`
pcp-5.2.2/qa/151:137: stampa=`echo $namea | sed -e 's/\.//g'`0010
pcp-5.2.2/qa/151-138- echo "s/$namea/TODAY-$day/g" >>$tmp/sed
##############################################
pcp-5.2.2/qa/1511-7-
pcp-5.2.2/qa/1511:8:seq=`basename $0`
pcp-5.2.2/qa/1511-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/152-7-
pcp-5.2.2/qa/152:8:seq=`basename $0`
pcp-5.2.2/qa/152-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/152-19-pminfo -f pmcd.numclients | tee $here/$seq.full | sed -e '/^$/d' >$tmp.out
pcp-5.2.2/qa/152:20:N=`sed -n '/value/s/ value //p' $tmp.out`
pcp-5.2.2/qa/152-21-echo "N=$N" >>$here/$seq.full
##############################################
pcp-5.2.2/qa/152-25-#
pcp-5.2.2/qa/152:26:N=`expr $N + 4`
pcp-5.2.2/qa/152:27:MIN=`expr $N - 1`
pcp-5.2.2/qa/152:28:MAX=`expr $N + 1`
pcp-5.2.2/qa/152-29-PAT="($MIN|$N|$MAX)"
##############################################
pcp-5.2.2/qa/153-7-
pcp-5.2.2/qa/153:8:seq=`basename $0`
pcp-5.2.2/qa/153-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/154-8-
pcp-5.2.2/qa/154:9:seq=`basename $0`
pcp-5.2.2/qa/154-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1543-7-
pcp-5.2.2/qa/1543:8:seq=`basename $0`
pcp-5.2.2/qa/1543-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1543-176- | _filter_json "Check hostspec parameter"
pcp-5.2.2/qa/1543:177:oldcontext=`cat $tmp.context`
pcp-5.2.2/qa/1543-178-
##############################################
pcp-5.2.2/qa/1543-181- | _filter_json "Pinging active context via URL"
pcp-5.2.2/qa/1543:182:urlcontext=`cat $tmp.context`
pcp-5.2.2/qa/1543-183-
##############################################
pcp-5.2.2/qa/1543-191- | _filter_json "Check polltimeout parameters"
pcp-5.2.2/qa/1543:192:oldcontext=`cat $tmp.context`
pcp-5.2.2/qa/1543-193-echo "Using context: $oldcontext" >> $seq.full
##############################################
pcp-5.2.2/qa/1543-197- | _filter_json "Pinging now-expired context via URL"
pcp-5.2.2/qa/1543:198:urlcontext=`cat $tmp.context`
pcp-5.2.2/qa/1543-199-if [ "$oldcontext" != "$urlcontext" ]; then
##############################################
pcp-5.2.2/qa/1543-205- | _filter_json "Pinging now-expired context via parameter"
pcp-5.2.2/qa/1543:206:paramctx=`cat $tmp.context`
pcp-5.2.2/qa/1543-207-if [ "$oldcontext" != "$paramctx" ]; then
##############################################
pcp-5.2.2/qa/1543-218- | _filter_json "metric name (single)"
pcp-5.2.2/qa/1543:219:webapiseries=`cat $tmp.series`
pcp-5.2.2/qa/1543-220-pminfoseries=`infoseries sample.long.ten`
##############################################
pcp-5.2.2/qa/1543-227- | _filter_json "metric name (indom)"
pcp-5.2.2/qa/1543:228:webapiseries=`cat $tmp.series`
pcp-5.2.2/qa/1543-229-pminfoseries=`infoseries sample.long.bin`
##############################################
pcp-5.2.2/qa/1543-301- | _filter_json "add all sample.colour instances"
pcp-5.2.2/qa/1543:302:context=`cat $tmp.context`
pcp-5.2.2/qa/1543-303-curl -s "http://localhost:$port/pmapi/$context/profile?expr=del&name=sample.colour&iname=red,green" \
##############################################
pcp-5.2.2/qa/1543-326- | _filter_json "store value by name"
pcp-5.2.2/qa/1543:327:context=`cat $tmp.context`
pcp-5.2.2/qa/1543-328-curl -s "http://localhost:$port/pmapi/$context/fetch?name=sample.long.write_me" \
##############################################
pcp-5.2.2/qa/1543-332- | _filter_json "store value by pmid"
pcp-5.2.2/qa/1543:333:context=`cat $tmp.context`
pcp-5.2.2/qa/1543-334-curl -s "http://localhost:$port/pmapi/$context/fetch?pmid=29.0.14" \
##############################################
pcp-5.2.2/qa/1543-339- | _filter_json "store by POST"
pcp-5.2.2/qa/1543:340:context=`cat $tmp.context`
pcp-5.2.2/qa/1543-341-curl -s "http://localhost:$port/pmapi/$context/fetch?name=sample.long.write_me" \
##############################################
pcp-5.2.2/qa/1543-381- | _filter_json "derive by GET"
pcp-5.2.2/qa/1543:382:context=`cat $tmp.context`
pcp-5.2.2/qa/1543-383-curl -s "http://localhost:$port/pmapi/$context/fetch?name=qa.metric" \
##############################################
pcp-5.2.2/qa/1544-7-
pcp-5.2.2/qa/1544:8:seq=`basename $0`
pcp-5.2.2/qa/1544-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1544-83-echo Getting contexts...
pcp-5.2.2/qa/1544:84:ctx1=`curl -s "http://localhost:$port/pmapi/context" | pmpython -c 'import sys,json; print(json.load(sys.stdin)["context"])'`
pcp-5.2.2/qa/1544:85:ctx2=`curl -s "http://localhost:$port/pmapi/context" | pmpython -c 'import sys,json; print(json.load(sys.stdin)["context"])'`
pcp-5.2.2/qa/1544:86:ctx3=`curl -s "http://localhost:$port/pmapi/context" | pmpython -c 'import sys,json; print(json.load(sys.stdin)["context"])'`
pcp-5.2.2/qa/1544:87:ctx4=`curl -s "http://localhost:$port/pmapi/context" | pmpython -c 'import sys,json; print(json.load(sys.stdin)["context"])'`
pcp-5.2.2/qa/1544:88:ctx5=`curl -s "http://localhost:$port/pmapi/context" | pmpython -c 'import sys,json; print(json.load(sys.stdin)["context"])'`
pcp-5.2.2/qa/1544:89:ctx6=`curl -s "http://localhost:$port/pmapi/context" | pmpython -c 'import sys,json; print(json.load(sys.stdin)["context"])'`
pcp-5.2.2/qa/1544-90-echo
##############################################
pcp-5.2.2/qa/1545-7-
pcp-5.2.2/qa/1545:8:seq=`basename $0`
pcp-5.2.2/qa/1545-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1546-7-
pcp-5.2.2/qa/1546:8:seq=`basename $0`
pcp-5.2.2/qa/1546-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1547-7-
pcp-5.2.2/qa/1547:8:seq=`basename $0`
pcp-5.2.2/qa/1547-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1547-19-
pcp-5.2.2/qa/1547:20:debug=`pmprobe -v pmcd.control.debug | $PCP_AWK_PROG '{print $3}'`
pcp-5.2.2/qa/1547-21-[ "$debug" -ne 0 ] && echo "Warning: pmcd debug $debug, not 0!"
##############################################
pcp-5.2.2/qa/155-7-
pcp-5.2.2/qa/155:8:seq=`basename $0`
pcp-5.2.2/qa/155-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/156-7-
pcp-5.2.2/qa/156:8:seq=`basename $0`
pcp-5.2.2/qa/156-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/156-116-fi
pcp-5.2.2/qa/156:117:try=`expr $port1 + 1`
pcp-5.2.2/qa/156:118:port2=`_find_free_port $try`
pcp-5.2.2/qa/156-119-if [ -z "$port2" ]
##############################################
pcp-5.2.2/qa/1566-8-
pcp-5.2.2/qa/1566:9:seq=`basename $0`
pcp-5.2.2/qa/1566-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/157-7-
pcp-5.2.2/qa/157:8:seq=`basename $0`
pcp-5.2.2/qa/157-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/157-34- then
pcp-5.2.2/qa/157:35: now=`wc -c <$tmp.0 | sed -e 's/ //g'`
pcp-5.2.2/qa/157-36- date >> $seq.full
##############################################
pcp-5.2.2/qa/1573-7-
pcp-5.2.2/qa/1573:8:seq=`basename $0`
pcp-5.2.2/qa/1573-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/158-11-
pcp-5.2.2/qa/158:12:seq=`basename $0`
pcp-5.2.2/qa/158-13-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1588-8-
pcp-5.2.2/qa/1588:9:seq=`basename $0`
pcp-5.2.2/qa/1588-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/159-7-
pcp-5.2.2/qa/159:8:seq=`basename $0`
pcp-5.2.2/qa/159-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1598-7-
pcp-5.2.2/qa/1598:8:seq=`basename $0`
pcp-5.2.2/qa/1598-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1599-7-
pcp-5.2.2/qa/1599:8:seq=`basename $0`
pcp-5.2.2/qa/1599-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/160-7-
pcp-5.2.2/qa/160:8:seq=`basename $0`
pcp-5.2.2/qa/160-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1600-7-
pcp-5.2.2/qa/1600:8:seq=`basename $0`
pcp-5.2.2/qa/1600-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1600-173-echo "== verify metric descs" | tee -a $seq.full
pcp-5.2.2/qa/1600:174:series=`pmseries $options sample.long.ten`
pcp-5.2.2/qa/1600-175-[ -z "$series" ] && _fail "Cannot find any timeseries matching sample.long.ten"
##############################################
pcp-5.2.2/qa/1600-178-echo "== verify metric insts" | tee -a $seq.full
pcp-5.2.2/qa/1600:179:series=`pmseries $options sample.ulong.bin`
pcp-5.2.2/qa/1600-180-[ -z "$series" ] && _fail "Cannot find any timeseries matching sample.ulong.bin"
##############################################
pcp-5.2.2/qa/1600-183-echo "== verify metric labels" | tee -a $seq.full
pcp-5.2.2/qa/1600:184:series=`pmseries $options sample.double.bin`
pcp-5.2.2/qa/1600-185-[ -z "$series" ] && _fail "Cannot find any timeseries matching sample.double.bin"
##############################################
pcp-5.2.2/qa/1600-191-echo "== verify label names and values" | tee -a $seq.full
pcp-5.2.2/qa/1600:192:labels=`pmseries $options -l | LC_COLLATE=POSIX sort`
pcp-5.2.2/qa/1600-193-pmseries $options -v $labels | _filter_label_values
##############################################
pcp-5.2.2/qa/1601-7-
pcp-5.2.2/qa/1601:8:seq=`basename $0`
pcp-5.2.2/qa/1601-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1601-98-
pcp-5.2.2/qa/1601:99:series1=`pmseries $options disk.all.read`
pcp-5.2.2/qa/1601-100-[ -z "$series1" ] && _fail "Cannot find any timeseries matching disk.all.read"
##############################################
pcp-5.2.2/qa/1601-102-
pcp-5.2.2/qa/1601:103:series2=`pmseries $options disk.dev.read`
pcp-5.2.2/qa/1601-104-[ -z "$series2" ] && _fail "Cannot find any timeseries matching disk.dev.read"
##############################################
pcp-5.2.2/qa/1601-106-
pcp-5.2.2/qa/1601:107:series3=`pmseries $options kernel.all.uptime`
pcp-5.2.2/qa/1601-108-[ -z "$series3" ] && _fail "Cannot find any timeseries matching kernel.all.uptime"
##############################################
pcp-5.2.2/qa/1602-7-
pcp-5.2.2/qa/1602:8:seq=`basename $0`
pcp-5.2.2/qa/1602-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1608-7-
pcp-5.2.2/qa/1608:8:seq=`basename $0`
pcp-5.2.2/qa/1608-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/161-7-
pcp-5.2.2/qa/161:8:seq=`basename $0`
pcp-5.2.2/qa/161-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/161-35- else
pcp-5.2.2/qa/161:36: sizeA=`wc -c <$tmp.A.meta`
pcp-5.2.2/qa/161:37: sizeB=`wc -c <$tmp.B.meta`
pcp-5.2.2/qa/161:38: diff=`expr $sizeA - $sizeB`
pcp-5.2.2/qa/161-39- if [ "$diff" -lt -4 -o "$diff" -gt 4 ]
##############################################
pcp-5.2.2/qa/161-58- else
pcp-5.2.2/qa/161:59: sizeA=`wc -c <$tmp.A.$ext`
pcp-5.2.2/qa/161:60: sizeB=`wc -c <$tmp.B.$ext`
pcp-5.2.2/qa/161:61: if [ "`wc -c <$tmp.A.$ext`" != "`wc -c <$tmp.B.$ext`" ]
pcp-5.2.2/qa/161-62- then
##############################################
pcp-5.2.2/qa/1613-7-
pcp-5.2.2/qa/1613:8:seq=`basename $0`
pcp-5.2.2/qa/1613-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1613-31-pmda=$PCP_PMDAS_DIR/linux/pmda_linux.so,linux_init
pcp-5.2.2/qa/1613:32:metrics=`pminfo -L -K clear -K add,60,$pmda zram | LC_COLLATE=POSIX sort`
pcp-5.2.2/qa/1613-33-
##############################################
pcp-5.2.2/qa/1613-39- tar xzf $tgz
pcp-5.2.2/qa/1613:40: base=`basename $tgz`
pcp-5.2.2/qa/1613-41-
##############################################
pcp-5.2.2/qa/162-20-
pcp-5.2.2/qa/162:21:seq=`basename $0`
pcp-5.2.2/qa/162-22-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1622-7-
pcp-5.2.2/qa/1622:8:seq=`basename $0`
pcp-5.2.2/qa/1622-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1623-7-
pcp-5.2.2/qa/1623:8:seq=`basename $0`
pcp-5.2.2/qa/1623-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1623-33-collectl2pcp collectl/rhel6.raw.gz $tmp/onevol
pcp-5.2.2/qa/1623:34:vols=`echo $tmp/onevol.[0-9]* | wc -w`
pcp-5.2.2/qa/1623-35-[ "$vols" -ne 1 ] && echo onevol FAILED, expected 1 volume but got $vols && status=1 && exit
##############################################
pcp-5.2.2/qa/1623-38-PCP_LOGIMPORT_MAXLOGSZ=250000 collectl2pcp collectl/rhel6.raw.gz $tmp/manyvols
pcp-5.2.2/qa/1623:39:vols=`echo $tmp/manyvols.[0-9]* | wc -w`
pcp-5.2.2/qa/1623-40-[ "$vols" -ne 4 ] && echo manyvols FAILED, expected 14 volumes but got $vols && status=1 && exit
##############################################
pcp-5.2.2/qa/163-9-
pcp-5.2.2/qa/163:10:seq=`basename $0`
pcp-5.2.2/qa/163-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/163-55-
pcp-5.2.2/qa/163:56: maxsz=`wc -c <$arch.0 | sed -e 's/ //g'`
pcp-5.2.2/qa/163:57: minsz=`expr $maxsz - 16 \* 1024`
pcp-5.2.2/qa/163-58-
##############################################
pcp-5.2.2/qa/163-61-
pcp-5.2.2/qa/163:62: sz=`expr $maxsz - 4`
pcp-5.2.2/qa/163-63- while [ $sz -ge $minsz ]
##############################################
pcp-5.2.2/qa/163-71- fi
pcp-5.2.2/qa/163:72: sz=`expr $sz - 4`
pcp-5.2.2/qa/163-73- done
##############################################
pcp-5.2.2/qa/164-6-
pcp-5.2.2/qa/164:7:seq=`basename $0`
pcp-5.2.2/qa/164-8-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/164-31-echo "=== first sample ==="
pcp-5.2.2/qa/164:32:f=`sed 1q $tmp.tmp`
pcp-5.2.2/qa/164:33:l=`sed -e 1d -e 2q $tmp.tmp`
pcp-5.2.2/qa/164:34:l=`expr $l - 2`
pcp-5.2.2/qa/164-35-sed -n -e "$f,${l}p" $tmp.out
##############################################
pcp-5.2.2/qa/164-37-echo "=== last sample ==="
pcp-5.2.2/qa/164:38:f=`tail -1 <$tmp.tmp`
pcp-5.2.2/qa/164-39-sed -n -e "$f,\$p" $tmp.out
##############################################
pcp-5.2.2/qa/1644-7-
pcp-5.2.2/qa/1644:8:seq=`basename $0`
pcp-5.2.2/qa/1644-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1644-54-
pcp-5.2.2/qa/1644:55:cases=`ls -1 $tmp.pmcd.conf.* | sed -e 's/.*pmcd.conf.//g' | LC_COLLATE=POSIX sort`
pcp-5.2.2/qa/1644-56-for case in $cases
##############################################
pcp-5.2.2/qa/165-7-
pcp-5.2.2/qa/165:8:seq=`basename $0`
pcp-5.2.2/qa/165-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/166-7-
pcp-5.2.2/qa/166:8:seq=`basename $0`
pcp-5.2.2/qa/166-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1660-7-
pcp-5.2.2/qa/1660:8:seq=`basename $0`
pcp-5.2.2/qa/1660-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1661-7-
pcp-5.2.2/qa/1661:8:seq=`basename $0`
pcp-5.2.2/qa/1661-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1661-160-fi
pcp-5.2.2/qa/1661:161:if [ `expr $curlogvol + 1` -ne $newlogvol ]
pcp-5.2.2/qa/1661-162-then
##############################################
pcp-5.2.2/qa/167-7-
pcp-5.2.2/qa/167:8:seq=`basename $0`
pcp-5.2.2/qa/167-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/167-32- pminfo -f pmcd.control.register
pcp-5.2.2/qa/167:33: i=`expr $i + 1`
pcp-5.2.2/qa/167-34-done
##############################################
pcp-5.2.2/qa/1671-8-
pcp-5.2.2/qa/1671:9:seq=`basename $0`
pcp-5.2.2/qa/1671-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1672-13-
pcp-5.2.2/qa/1672:14:seq=`basename $0`
pcp-5.2.2/qa/1672-15-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1672-29-do
pcp-5.2.2/qa/1672:30: mechanism=`echo $mech | sed -e 's/-.*//g'`
pcp-5.2.2/qa/1672-31- $pluginviewer -c | grep 'Plugin "'$mechanism'"' >/dev/null 2>&1
##############################################
pcp-5.2.2/qa/168-8-
pcp-5.2.2/qa/168:9:seq=`basename $0`
pcp-5.2.2/qa/168-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1680-15-
pcp-5.2.2/qa/1680:16:seq=`basename $0`
pcp-5.2.2/qa/1680-17-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1681-9-then
pcp-5.2.2/qa/1681:10: seq=`basename $0`
pcp-5.2.2/qa/1681-11- echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1681-13- # use $seq from caller, unless not set
pcp-5.2.2/qa/1681:14: [ -n "$seq" ] || seq=`basename $0`
pcp-5.2.2/qa/1681:15: echo "QA output created by `basename $0` $*"
pcp-5.2.2/qa/1681-16-fi
##############################################
pcp-5.2.2/qa/1682-8-
pcp-5.2.2/qa/1682:9:seq=`basename $0`
pcp-5.2.2/qa/1682-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/169-10-
pcp-5.2.2/qa/169:11:seq=`basename $0`
pcp-5.2.2/qa/169-12-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/169-73- pmie_was_running=true
pcp-5.2.2/qa/169:74: echo "Found pmie PID `cat $PCP_RUN_DIR/pmie.pid` running @ start" >>$here/$seq.full
pcp-5.2.2/qa/169-75- _service pmie stop >>$here/$seq.full 2>&1
##############################################
pcp-5.2.2/qa/169-200-egrep '[P]ID|[p]m|[d]umb' $tmp.ps >>$seq.full
pcp-5.2.2/qa/169:201:old_dumb_pid=`$PCP_AWK_PROG <$tmp.ps '/\/src\/dumb_pmda /{print $2}'`
pcp-5.2.2/qa/169-202-echo "old_dumb_pid=$old_dumb_pid" >>$seq.full
pcp-5.2.2/qa/169:203:old_pmcd_pid=`$PCP_AWK_PROG <$tmp.ps '/\/bin\/pmcd /{print $2}'`
pcp-5.2.2/qa/169-204-echo "old_pmcd_pid=$old_pmcd_pid" >>$seq.full
##############################################
pcp-5.2.2/qa/169-242-egrep '[P]ID|[p]m|[d]umb' $tmp.ps >>$seq.full
pcp-5.2.2/qa/169:243:new_dumb_pid=`$PCP_AWK_PROG <$tmp.ps '/\/src\/dumb_pmda /{print $2}'`
pcp-5.2.2/qa/169-244-echo "new_dumb_pid=$new_dumb_pid" >>$seq.full
pcp-5.2.2/qa/169:245:new_pmcd_pid=`$PCP_AWK_PROG <$tmp.ps '/\/bin\/pmcd /{print $2}'`
pcp-5.2.2/qa/169-246-echo "new_pmcd_pid=$new_pmcd_pid" >>$seq.full
##############################################
pcp-5.2.2/qa/169-289-egrep '[P]ID|[p]m|[d]umb' $tmp.ps >>$seq.full
pcp-5.2.2/qa/169:290:new_dumb_pid=`$PCP_AWK_PROG <$tmp.ps '/\/src\/dumb_pmda /{print $2}'`
pcp-5.2.2/qa/169-291-echo "new_dumb_pid=$new_dumb_pid" >>$seq.full
pcp-5.2.2/qa/169:292:new_pmcd_pid=`$PCP_AWK_PROG <$tmp.ps '/\/bin\/pmcd /{print $2}'`
pcp-5.2.2/qa/169-293-echo "new_pmcd_pid=$new_pmcd_pid" >>$seq.full
##############################################
pcp-5.2.2/qa/169-341-egrep '[P]ID|[p]m|[d]umb' $tmp.ps >>$seq.full
pcp-5.2.2/qa/169:342:new_dumb_pid=`$PCP_AWK_PROG <$tmp.ps '/\/src\/dumb_pmda /{print $2}'`
pcp-5.2.2/qa/169-343-echo "new_dumb_pid=$new_dumb_pid" >>$seq.full
pcp-5.2.2/qa/169:344:new_pmcd_pid=`$PCP_AWK_PROG <$tmp.ps '/\/bin\/pmcd /{print $2}'`
pcp-5.2.2/qa/169-345-echo "new_pmcd_pid=$new_pmcd_pid" >>$seq.full
##############################################
pcp-5.2.2/qa/169-380-egrep '[P]ID|[p]mcd|[p]mda' $tmp.ps >>$seq.full
pcp-5.2.2/qa/169:381:new_dumb_pid=`$PCP_AWK_PROG <$tmp.ps '/\/src\/dumb_pmda /{print $2}'`
pcp-5.2.2/qa/169-382-echo "new_dumb_pid=$new_dumb_pid" >>$seq.full
pcp-5.2.2/qa/169:383:new_pmcd_pid=`$PCP_AWK_PROG <$tmp.ps '/\/bin\/pmcd /{print $2}'`
pcp-5.2.2/qa/169-384-echo "new_pmcd_pid=$new_pmcd_pid" >>$seq.full
##############################################
pcp-5.2.2/qa/1690-6-
pcp-5.2.2/qa/1690:7:seq=`basename $0`
pcp-5.2.2/qa/1690-8-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1692-7-
pcp-5.2.2/qa/1692:8:seq=`basename $0`
pcp-5.2.2/qa/1692-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1694-7-
pcp-5.2.2/qa/1694:8:seq=`basename $0`
pcp-5.2.2/qa/1694-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1695-7-
pcp-5.2.2/qa/1695:8:seq=`basename $0`
pcp-5.2.2/qa/1695-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1695-69- sleep 1
pcp-5.2.2/qa/1695:70: i=`expr $i + 1`
pcp-5.2.2/qa/1695-71-done
##############################################
pcp-5.2.2/qa/1696-7-
pcp-5.2.2/qa/1696:8:seq=`basename $0`
pcp-5.2.2/qa/1696-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1696-66- sleep 1
pcp-5.2.2/qa/1696:67: i=`expr $i + 1`
pcp-5.2.2/qa/1696-68-done
##############################################
pcp-5.2.2/qa/170-7-
pcp-5.2.2/qa/170:8:seq=`basename $0`
pcp-5.2.2/qa/170-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1700-5-
pcp-5.2.2/qa/1700:6:seq=`basename $0`
pcp-5.2.2/qa/1700-7-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1701-5-
pcp-5.2.2/qa/1701:6:seq=`basename $0`
pcp-5.2.2/qa/1701-7-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1702-5-
pcp-5.2.2/qa/1702:6:seq=`basename $0`
pcp-5.2.2/qa/1702-7-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1703-5-
pcp-5.2.2/qa/1703:6:seq=`basename $0`
pcp-5.2.2/qa/1703-7-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1704-5-
pcp-5.2.2/qa/1704:6:seq=`basename $0`
pcp-5.2.2/qa/1704-7-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1705-5-
pcp-5.2.2/qa/1705:6:seq=`basename $0`
pcp-5.2.2/qa/1705-7-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1706-5-
pcp-5.2.2/qa/1706:6:seq=`basename $0`
pcp-5.2.2/qa/1706-7-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1707-5-
pcp-5.2.2/qa/1707:6:seq=`basename $0`
pcp-5.2.2/qa/1707-7-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1708-7-
pcp-5.2.2/qa/1708:8:seq=`basename $0`
pcp-5.2.2/qa/1708-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1709-7-
pcp-5.2.2/qa/1709:8:seq=`basename $0`
pcp-5.2.2/qa/1709-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/171-7-
pcp-5.2.2/qa/171:8:seq=`basename $0`
pcp-5.2.2/qa/171-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1710-15-
pcp-5.2.2/qa/1710:16:seq=`basename $0`
pcp-5.2.2/qa/1710-17-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1711-7-
pcp-5.2.2/qa/1711:8:seq=`basename $0`
pcp-5.2.2/qa/1711-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1712-7-
pcp-5.2.2/qa/1712:8:seq=`basename $0`
pcp-5.2.2/qa/1712-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1713-7-
pcp-5.2.2/qa/1713:8:seq=`basename $0`
pcp-5.2.2/qa/1713-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1714-7-
pcp-5.2.2/qa/1714:8:seq=`basename $0`
pcp-5.2.2/qa/1714-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1715-10-
pcp-5.2.2/qa/1715:11:seq=`basename $0`
pcp-5.2.2/qa/1715-12-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1716-7-
pcp-5.2.2/qa/1716:8:seq=`basename $0`
pcp-5.2.2/qa/1716-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1717-7-
pcp-5.2.2/qa/1717:8:seq=`basename $0`
pcp-5.2.2/qa/1717-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1718-8-
pcp-5.2.2/qa/1718:9:seq=`basename $0`
pcp-5.2.2/qa/1718-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1719-7-
pcp-5.2.2/qa/1719:8:seq=`basename $0`
pcp-5.2.2/qa/1719-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/172-8-
pcp-5.2.2/qa/172:9:seq=`basename $0`
pcp-5.2.2/qa/172-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1720-7-
pcp-5.2.2/qa/1720:8:seq=`basename $0`
pcp-5.2.2/qa/1720-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1721-5-
pcp-5.2.2/qa/1721:6:seq=`basename $0`
pcp-5.2.2/qa/1721-7-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1722-5-
pcp-5.2.2/qa/1722:6:seq=`basename $0`
pcp-5.2.2/qa/1722-7-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1723-5-
pcp-5.2.2/qa/1723:6:seq=`basename $0`
pcp-5.2.2/qa/1723-7-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1724-5-
pcp-5.2.2/qa/1724:6:seq=`basename $0`
pcp-5.2.2/qa/1724-7-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/173-7-
pcp-5.2.2/qa/173:8:seq=`basename $0`
pcp-5.2.2/qa/173-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/174-7-
pcp-5.2.2/qa/174:8:seq=`basename $0`
pcp-5.2.2/qa/174-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/174-52- -e 's/ 1000000 0 2004007/ 1 0 7400002/' \
pcp-5.2.2/qa/174:53: -e '/\(DSO init .*->\)0x[0-9a-f]*()/s//\1VADDR()/' \
pcp-5.2.2/qa/174-54- -e '/DSO init .*->/s/pmda_interface=0x[0-9a-f][0-9a-f]*/pmda_interface=0xXXXX/' \
##############################################
pcp-5.2.2/qa/174.out-240-000: 20 7003 XPID 0 0 0 1 7400006
pcp-5.2.2/qa/174.out:241:DSO init sample_init->VADDR() domain=0 challenge: pmda_interface=0xXXXX pmapi_version=2
pcp-5.2.2/qa/174.out-242-DSO has domain=30 pmda_interface=X pmapi_version=2
##############################################
pcp-5.2.2/qa/1740-7-
pcp-5.2.2/qa/1740:8:seq=`basename $0`
pcp-5.2.2/qa/1740-9-if [ $# -eq 0 ]
##############################################
pcp-5.2.2/qa/1745-7-
pcp-5.2.2/qa/1745:8:seq=`basename $0`
pcp-5.2.2/qa/1745-9-if [ $# -eq 0 ]
##############################################
pcp-5.2.2/qa/1745-72- | _filter_pmval > $tmp.values
pcp-5.2.2/qa/1745:73:lines=`wc -l < $tmp.values`
pcp-5.2.2/qa/1745-74-if [ $lines -ge 4 -a $lines -le 7 ]
##############################################
pcp-5.2.2/qa/175-7-
pcp-5.2.2/qa/175:8:seq=`basename $0`
pcp-5.2.2/qa/175-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/176-7-
pcp-5.2.2/qa/176:8:seq=`basename $0`
pcp-5.2.2/qa/176-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1763-9-then
pcp-5.2.2/qa/1763:10: seq=`basename $0`
pcp-5.2.2/qa/1763-11- echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1763-13- # use $seq from caller, unless not set
pcp-5.2.2/qa/1763:14: [ -n "$seq" ] || seq=`basename $0`
pcp-5.2.2/qa/1763:15: echo "QA output created by `basename $0` $*"
pcp-5.2.2/qa/1763-16-fi
##############################################
pcp-5.2.2/qa/1768-7-
pcp-5.2.2/qa/1768:8:seq=`basename $0`
pcp-5.2.2/qa/1768-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/177-7-
pcp-5.2.2/qa/177:8:seq=`basename $0`
pcp-5.2.2/qa/177-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/177-138-
pcp-5.2.2/qa/177:139:offset=`_arch_start $tmp 0.05`
pcp-5.2.2/qa/177-140-echo "offset=$offset" >>$seq.full
##############################################
pcp-5.2.2/qa/178-7-
pcp-5.2.2/qa/178:8:seq=`basename $0`
pcp-5.2.2/qa/178-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/178-80-port1=`_find_free_port`
pcp-5.2.2/qa/178:81:port2=`expr $port1 + 1`
pcp-5.2.2/qa/178:82:port2=`_find_free_port $port2`
pcp-5.2.2/qa/178:83:port3=`expr $port2 + 1`
pcp-5.2.2/qa/178:84:port3=`_find_free_port $port3`
pcp-5.2.2/qa/178-85-
##############################################
pcp-5.2.2/qa/178-192-echo "Log record counts per merged volume ..." | tee -a $seq.full
pcp-5.2.2/qa/178:193:for vol in `echo $tmp.merge-mv.[0-9]* | sed -e "s;$tmp\\.merge-mv\\.\\([0-9]*\\)\\.x;\\1;g"`
pcp-5.2.2/qa/178-194-do
##############################################
pcp-5.2.2/qa/178-205-do
pcp-5.2.2/qa/178:206: file=`echo $file | sed -e 's/\.x$//'`
pcp-5.2.2/qa/178-207- mv $file.x $file
##############################################
pcp-5.2.2/qa/179-7-
pcp-5.2.2/qa/179:8:seq=`basename $0`
pcp-5.2.2/qa/179-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1793-7-
pcp-5.2.2/qa/1793:8:seq=`basename $0`
pcp-5.2.2/qa/1793-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/180-7-
pcp-5.2.2/qa/180:8:seq=`basename $0`
pcp-5.2.2/qa/180-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/180-53-echo
pcp-5.2.2/qa/180:54:echo "samples: `grep '^[0-9][0-9]:' $tmp.out | wc -l | sed -e 's/ *//g'`"
pcp-5.2.2/qa/180-55-egrep '^(user|sys)' $tmp.err | _do_cpu
pcp-5.2.2/qa/180-56-pmval -z -D128 -n $tmp.pmns -a $arch -t $DELTA foo 2>$tmp.err >/dev/null
pcp-5.2.2/qa/180:57:echo "__pmLogReads: `grep __pmLogRead $tmp.err | wc -l | sed -e 's/ *//g'`"
pcp-5.2.2/qa/180-58-
##############################################
pcp-5.2.2/qa/180-68-echo
pcp-5.2.2/qa/180:69:echo "samples: `grep '^[0-9][0-9]:' $tmp.out | wc -l | sed -e 's/ *//g'`"
pcp-5.2.2/qa/180-70-egrep '^(user|sys)' $tmp.err | _do_cpu
pcp-5.2.2/qa/180-71-pmval -z -D128 -i 4653127 -n $tmp.pmns -a $arch -t $DELTA foo 2>$tmp.err >/dev/null
pcp-5.2.2/qa/180:72:echo "__pmLogReads: `grep __pmLogRead $tmp.err | wc -l | sed -e 's/ *//g'`"
##############################################
pcp-5.2.2/qa/1805-7-
pcp-5.2.2/qa/1805:8:seq=`basename $0`
pcp-5.2.2/qa/1805-9-if [ $# -eq 0 ]
##############################################
pcp-5.2.2/qa/181-7-
pcp-5.2.2/qa/181:8:seq=`basename $0`
pcp-5.2.2/qa/181-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1813-9-then
pcp-5.2.2/qa/1813:10: seq=`basename $0`
pcp-5.2.2/qa/1813-11- echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1813-13- # use $seq from caller, unless not set
pcp-5.2.2/qa/1813:14: [ -n "$seq" ] || seq=`basename $0`
pcp-5.2.2/qa/1813:15: echo "QA output created by `basename $0` $*"
pcp-5.2.2/qa/1813-16-fi
##############################################
pcp-5.2.2/qa/182-7-
pcp-5.2.2/qa/182:8:seq=`basename $0`
pcp-5.2.2/qa/182-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/182-65- pmsleep 2.5
pcp-5.2.2/qa/182:66: pmlc_pid=`cat $tmp.pid`
pcp-5.2.2/qa/182-67- [ ! -z "$pmlc_pid" ] && _silent_kill $pmlc_pid
##############################################
pcp-5.2.2/qa/1820-7-
pcp-5.2.2/qa/1820:8:seq=`basename $0`
pcp-5.2.2/qa/1820-9-if [ $# -eq 0 ]
##############################################
pcp-5.2.2/qa/1821-7-
pcp-5.2.2/qa/1821:8:seq=`basename $0`
pcp-5.2.2/qa/1821-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1824-7-
pcp-5.2.2/qa/1824:8:seq=`basename $0`
pcp-5.2.2/qa/1824-9-if [ $# -eq 0 ]
##############################################
pcp-5.2.2/qa/1825-8-
pcp-5.2.2/qa/1825:9:seq=`basename $0`
pcp-5.2.2/qa/1825-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1826-9-then
pcp-5.2.2/qa/1826:10: seq=`basename $0`
pcp-5.2.2/qa/1826-11- echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1826-13- # use $seq from caller, unless not set
pcp-5.2.2/qa/1826:14: [ -n "$seq" ] || seq=`basename $0`
pcp-5.2.2/qa/1826:15: echo "QA output created by `basename $0` $*"
pcp-5.2.2/qa/1826-16-fi
##############################################
pcp-5.2.2/qa/1826-53-domainname=`_domain_name`
pcp-5.2.2/qa/1826:54:sha256id=`echo -n $machineid | sha256sum | awk '{ print $1 }'`
pcp-5.2.2/qa/1826-55-$sudo rm -rf $tmp $tmp.* $seq.full
##############################################
pcp-5.2.2/qa/1826-103- do
pcp-5.2.2/qa/1826:104: name=`echo $file | sed -e 's/.*\.//g'`
pcp-5.2.2/qa/1826-105- echo; echo $name | tee -a $here/$seq.full
##############################################
pcp-5.2.2/qa/183-8-
pcp-5.2.2/qa/183:9:seq=`basename $0`
pcp-5.2.2/qa/183-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/183-216-
pcp-5.2.2/qa/183:217:#for pid in `cat $tmp.new`
pcp-5.2.2/qa/183-218-#do
##############################################
pcp-5.2.2/qa/1837-7-
pcp-5.2.2/qa/1837:8:seq=`basename $0`
pcp-5.2.2/qa/1837-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/184-7-
pcp-5.2.2/qa/184:8:seq=`basename $0`
pcp-5.2.2/qa/184-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/184-112-# Cleanup after youself
pcp-5.2.2/qa/184:113:$sudo rm -f `dirname $tmp`/Latest
pcp-5.2.2/qa/184-114-
##############################################
pcp-5.2.2/qa/185-7-
pcp-5.2.2/qa/185:8:seq=`basename $0`
pcp-5.2.2/qa/185-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1855-7-
pcp-5.2.2/qa/1855:8:seq=`basename $0`
pcp-5.2.2/qa/1855-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/186-7-
pcp-5.2.2/qa/186:8:seq=`basename $0`
pcp-5.2.2/qa/186-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/187-11-
pcp-5.2.2/qa/187:12:seq=`basename $0`
pcp-5.2.2/qa/187-13-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/187-85-echo "otherhost=$otherhost" >>$seq.full
pcp-5.2.2/qa/187:86:otherip=`_host_to_ipaddr $otherhost`
pcp-5.2.2/qa/187-87-if [ -z "$otherip" ]
##############################################
pcp-5.2.2/qa/1871-7-
pcp-5.2.2/qa/1871:8:seq=`basename $0`
pcp-5.2.2/qa/1871-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1872-7-
pcp-5.2.2/qa/1872:8:seq=`basename $0`
pcp-5.2.2/qa/1872-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1874-8-
pcp-5.2.2/qa/1874:9:seq=`basename $0`
pcp-5.2.2/qa/1874-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1874-93-# Sanity check
pcp-5.2.2/qa/1874:94:series1=`pmseries $options disk.all.read`
pcp-5.2.2/qa/1874-95-[ -z "$series1" ] && _fail "Cannot find any timeseries matching disk.all.read"
##############################################
pcp-5.2.2/qa/1876-9-then
pcp-5.2.2/qa/1876:10: seq=`basename $0`
pcp-5.2.2/qa/1876-11- echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1876-13- # use $seq from caller, unless not set
pcp-5.2.2/qa/1876:14: [ -n "$seq" ] || seq=`basename $0`
pcp-5.2.2/qa/1876:15: echo "QA output created by `basename $0` $*"
pcp-5.2.2/qa/1876-16-fi
##############################################
pcp-5.2.2/qa/188-7-
pcp-5.2.2/qa/188:8:seq=`basename $0`
pcp-5.2.2/qa/188-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1886-6-#
pcp-5.2.2/qa/1886:7:seq=`basename $0`
pcp-5.2.2/qa/1886-8-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/189-7-
pcp-5.2.2/qa/189:8:seq=`basename $0`
pcp-5.2.2/qa/189-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/189-60-_numchildren < $tmp.ps > $tmp.num
pcp-5.2.2/qa/189:61:max=`cut -d' ' -f1 < $tmp.num | LC_COLLATE=POSIX sort -nr | head -1 | sed -e 's/ *//g'`
pcp-5.2.2/qa/189-62-
##############################################
pcp-5.2.2/qa/189-68-
pcp-5.2.2/qa/189:69:max=`cut -d' ' -f1 < $tmp.num | LC_COLLATE=POSIX sort -nr | head -1 | sed -e 's/ *//g'`
pcp-5.2.2/qa/189-70-
##############################################
pcp-5.2.2/qa/1896-7-
pcp-5.2.2/qa/1896:8:seq=`basename $0`
pcp-5.2.2/qa/1896-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/1896-30-echo == checking strftime archive name substitution | tee -a $seq.full
pcp-5.2.2/qa/1896:31:base=`pmdate $spec`
pcp-5.2.2/qa/1896:32:nextbase=`pmdate +1M $spec`
pcp-5.2.2/qa/1896-33-$PMLOGGER -s10 -t 1s -c config.default -l $tmp/pmlogger.log $tmp/$spec 2>$tmp/$seq.err &
##############################################
pcp-5.2.2/qa/1896-38-then
pcp-5.2.2/qa/1896:39: echo "found base: `ls -l $tmp/$base.index`" >>$seq.full
pcp-5.2.2/qa/1896-40-elif [ -f $nextbase.index ]
pcp-5.2.2/qa/1896-41-then
pcp-5.2.2/qa/1896:42: echo "found nextbase: `ls -l $tmp/$nextbase.index`" >>$seq.full
pcp-5.2.2/qa/1896-43-else
##############################################
pcp-5.2.2/qa/1896-49-echo == checking SIGUSR2 starts a new log as non-root user | tee -a $seq.full
pcp-5.2.2/qa/1896:50:base=`pmdate $spec`
pcp-5.2.2/qa/1896:51:nextbase=`pmdate +1M $spec`
pcp-5.2.2/qa/1896-52-$PMLOGGER -U$username -s30 -t 1s -c config.default -l $tmp/pmlogger.log $tmp/$spec 2>$tmp/$seq.err &
##############################################
pcp-5.2.2/qa/1896-58-then
pcp-5.2.2/qa/1896:59: echo "found 1st base: `ls -l $tmp/$base.index`" >>$seq.full
pcp-5.2.2/qa/1896-60-elif [ -f $nextbase.index ]
pcp-5.2.2/qa/1896-61-then
pcp-5.2.2/qa/1896:62: echo "found 1st nextbase: `ls -l $tmp/$nextbase.index`" >>$seq.full
pcp-5.2.2/qa/1896-63-else
##############################################
pcp-5.2.2/qa/1896-69-then
pcp-5.2.2/qa/1896:70: echo "found 2nd base: `ls -l $tmp/$base-00.index`" >>$seq.full
pcp-5.2.2/qa/1896-71-elif [ -f $nextbase.index ]
pcp-5.2.2/qa/1896-72-then
pcp-5.2.2/qa/1896:73: echo "found 2nd nextbase: `ls -l $tmp/$nextbase.index`" >>$seq.full
pcp-5.2.2/qa/1896-74-elif [ -f $nextbase-00.index ]
pcp-5.2.2/qa/1896-75-then
pcp-5.2.2/qa/1896:76: echo "found 2nd nextbase: `ls -l $tmp/$nextbase-00.index`" >>$seq.full
pcp-5.2.2/qa/1896-77-else
##############################################
pcp-5.2.2/qa/190-7-
pcp-5.2.2/qa/190:8:seq=`basename $0`
pcp-5.2.2/qa/190-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/190-40-src/pmconvscale | _filter
pcp-5.2.2/qa/190:41:status=`expr $status + $?`
pcp-5.2.2/qa/190-42-
##############################################
pcp-5.2.2/qa/190-45-src/pmconvscale c | _filter
pcp-5.2.2/qa/190:46:status=`expr $status + $?`
pcp-5.2.2/qa/190-47-
##############################################
pcp-5.2.2/qa/190-50-src/pmconvscale s | _filter
pcp-5.2.2/qa/190:51:status=`expr $status + $?`
pcp-5.2.2/qa/190-52-
##############################################
pcp-5.2.2/qa/190-55-src/pmconvscale t | _filter
pcp-5.2.2/qa/190:56:status=`expr $status + $?`
pcp-5.2.2/qa/190-57-
##############################################
pcp-5.2.2/qa/190-60-src/pmconvscale r | _filter
pcp-5.2.2/qa/190:61:status=`expr $status + $?`
pcp-5.2.2/qa/190-62-
##############################################
pcp-5.2.2/qa/191-7-
pcp-5.2.2/qa/191:8:seq=`basename $0`
pcp-5.2.2/qa/191-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/192-7-
pcp-5.2.2/qa/192:8:seq=`basename $0`
pcp-5.2.2/qa/192-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/193-8-
pcp-5.2.2/qa/193:9:seq=`basename $0`
pcp-5.2.2/qa/193-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/194-8-
pcp-5.2.2/qa/194:9:seq=`basename $0`
pcp-5.2.2/qa/194-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/195-7-
pcp-5.2.2/qa/195:8:seq=`basename $0`
pcp-5.2.2/qa/195-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/196-10-
pcp-5.2.2/qa/196:11:seq=`basename $0`
pcp-5.2.2/qa/196-12-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/197-8-
pcp-5.2.2/qa/197:9:seq=`basename $0`
pcp-5.2.2/qa/197-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/198-7-
pcp-5.2.2/qa/198:8:seq=`basename $0`
pcp-5.2.2/qa/198-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/198-27- echo "=== $pmda pmda ===" >>$seq.full
pcp-5.2.2/qa/198:28: then=`pmprobe -v $pmda.datasize | $PCP_AWK_PROG '{print $NF}'`
pcp-5.2.2/qa/198-29- echo "then=$then" >>$seq.full
##############################################
pcp-5.2.2/qa/198-39- do
pcp-5.2.2/qa/198:40: echo "thread $i: lines of output: `wc -l <$tmp.$i | sed -e 's/ *//g'`"
pcp-5.2.2/qa/198-41- done
pcp-5.2.2/qa/198-42-
pcp-5.2.2/qa/198:43: now=`pmprobe -v $pmda.datasize | $PCP_AWK_PROG '{print $NF}'`
pcp-5.2.2/qa/198-44- echo "now=$now" >>$seq.full
pcp-5.2.2/qa/198:45: delta=`expr $now - $then`
pcp-5.2.2/qa/198-46-
##############################################
pcp-5.2.2/qa/199-7-
pcp-5.2.2/qa/199:8:seq=`basename $0`
pcp-5.2.2/qa/199-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/199-165-# use next port this time
pcp-5.2.2/qa/199:166:port=`expr $port + 1`
pcp-5.2.2/qa/199-167-
##############################################
pcp-5.2.2/qa/200-7-
pcp-5.2.2/qa/200:8:seq=`basename $0`
pcp-5.2.2/qa/200-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/200-47- sleep 1
pcp-5.2.2/qa/200:48: _i=`expr $_i + 1`
pcp-5.2.2/qa/200-49- else
##############################################
pcp-5.2.2/qa/201-8-
pcp-5.2.2/qa/201:9:seq=`basename $0`
pcp-5.2.2/qa/201-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/202-7-
pcp-5.2.2/qa/202:8:seq=`basename $0`
pcp-5.2.2/qa/202-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/203-8-
pcp-5.2.2/qa/203:9:seq=`basename $0`
pcp-5.2.2/qa/203-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/204-7-
pcp-5.2.2/qa/204:8:seq=`basename $0`
pcp-5.2.2/qa/204-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/205-7-
pcp-5.2.2/qa/205:8:seq=`basename $0`
pcp-5.2.2/qa/205-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/206-7-
pcp-5.2.2/qa/206:8:seq=`basename $0`
pcp-5.2.2/qa/206-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/207-7-
pcp-5.2.2/qa/207:8:seq=`basename $0`
pcp-5.2.2/qa/207-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/208-8-
pcp-5.2.2/qa/208:9:seq=`basename $0`
pcp-5.2.2/qa/208-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/209-7-
pcp-5.2.2/qa/209:8:seq=`basename $0`
pcp-5.2.2/qa/209-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/210-8-
pcp-5.2.2/qa/210:9:seq=`basename $0`
pcp-5.2.2/qa/210-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/211-8-
pcp-5.2.2/qa/211:9:seq=`basename $0`
pcp-5.2.2/qa/211-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/212-7-
pcp-5.2.2/qa/212:8:seq=`basename $0`
pcp-5.2.2/qa/212-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/212-32- then
pcp-5.2.2/qa/212:33: if [ "`echo $PMCD_LOG_DIR/core*`" != "$PMCD_LOG_DIR/core*" ]
pcp-5.2.2/qa/212-34- then
##############################################
pcp-5.2.2/qa/212-117- sleep 5
pcp-5.2.2/qa/212:118: [ "`echo $PMCD_LOG_DIR/core*`" != "$PMCD_LOG_DIR/core*" ] && _cleanup
pcp-5.2.2/qa/212-119- echo "Restart with SIGHUP"
##############################################
pcp-5.2.2/qa/212-136- _wait_for_pmlogger
pcp-5.2.2/qa/212:137: [ "`echo $PMCD_LOG_DIR/core*`" != "$PMCD_LOG_DIR/core*" ] && _cleanup
pcp-5.2.2/qa/212-138-done
##############################################
pcp-5.2.2/qa/212-148- _service pcp stop | _filter_pcp_stop
pcp-5.2.2/qa/212:149: [ "`echo $PMCD_LOG_DIR/core*`" != "$PMCD_LOG_DIR/core*" ] && _cleanup
pcp-5.2.2/qa/212-150-done
##############################################
pcp-5.2.2/qa/212-175- $sudo $signal -a -s HUP pmcd
pcp-5.2.2/qa/212:176: [ "`echo $PMCD_LOG_DIR/core*`" != "$PMCD_LOG_DIR/core*" ] && _cleanup
pcp-5.2.2/qa/212-177-done
##############################################
pcp-5.2.2/qa/213-7-
pcp-5.2.2/qa/213:8:seq=`basename $0`
pcp-5.2.2/qa/213-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/214-7-
pcp-5.2.2/qa/214:8:seq=`basename $0`
pcp-5.2.2/qa/214-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/214-50- 2) # 3 archives, 3 timezones
pcp-5.2.2/qa/214:51: files="`ls archives/tzchange*.0 | sed -e '/\.meta/d' -e '/\.index/d' | grep '.-a' | tr '\012' ' ' | sed -e 's/ *$//'`"
pcp-5.2.2/qa/214-52- ;;
pcp-5.2.2/qa/214-53- 3) # 2 archives, 2 timezones
pcp-5.2.2/qa/214:54: files="`ls archives/tzchange*.0 | sed -e '/\.meta/d' -e '/\.index/d' | grep '.-a' | sed -e 2q | tr '\012' ' ' | sed -e 's/ *$//'`"
pcp-5.2.2/qa/214-55- ;;
pcp-5.2.2/qa/214-56- 4) # 1 archive, 1 timezone
pcp-5.2.2/qa/214:57: files="`ls archives/tzchange*.0 | sed -e '/\.meta/d' -e '/\.index/d' | grep '.-a' | sed -e 1q | tr '\012' ' ' | sed -e 's/ *$//'`"
pcp-5.2.2/qa/214-58- ;;
pcp-5.2.2/qa/214-59- 5) # 2 archives, 1 timezone
pcp-5.2.2/qa/214:60: files="`ls archives/tzchange*.0 | sed -e '/\.meta/d' -e '/\.index/d' | grep '.-11' | sed -e 2q | tr '\012' ' ' | sed -e 's/ *$//'`"
pcp-5.2.2/qa/214-61- ;;
##############################################
pcp-5.2.2/qa/215-7-
pcp-5.2.2/qa/215:8:seq=`basename $0`
pcp-5.2.2/qa/215-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/215-49-# real QA test starts here
pcp-5.2.2/qa/215:50:otherhost=`./getpmcdhosts -L -n 1 2>$tmp.out`
pcp-5.2.2/qa/215-51-if [ -z "$otherhost" ]
##############################################
pcp-5.2.2/qa/215-64-SOCKS_SERVER=$PCPQA_SOCKS_SERVER
pcp-5.2.2/qa/215:65:SOCKS_NS=`_host_to_ipaddr $SOCKS_SERVER`
pcp-5.2.2/qa/215-66-SOCKS_DEBUG=
##############################################
pcp-5.2.2/qa/215-90- do
pcp-5.2.2/qa/215:91: pid=`echo $KILLER | $PCP_AWK_PROG '{ x='"$p"'; print $x }'`
pcp-5.2.2/qa/215-92- _wait_for_pmlogger $pid $tmp.${host}_$i.log 120
pcp-5.2.2/qa/215:93: p=`expr $p + 1`
pcp-5.2.2/qa/215-94- done
##############################################
pcp-5.2.2/qa/216-12-
pcp-5.2.2/qa/216:13:seq=`basename $0`
pcp-5.2.2/qa/216-14-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/216-204-
pcp-5.2.2/qa/216:205:nm=`wc -l <$pcp | sed -e 's/[ ]*//g'`
pcp-5.2.2/qa/216:206:nn=`wc -l <$ns2 | sed -e 's/[ ]*//g'`
pcp-5.2.2/qa/216-207-if [ $nm -lt $nn ]
##############################################
pcp-5.2.2/qa/217-7-
pcp-5.2.2/qa/217:8:seq=`basename $0`
pcp-5.2.2/qa/217-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/217-57-do
pcp-5.2.2/qa/217:58: pat=`echo $arch | sed -e 's/0$/*/'`
pcp-5.2.2/qa/217-59- cp $pat $tmp/src
##############################################
pcp-5.2.2/qa/217-80-/g' | sed -e 's;^.*/;;' >$tmp.tmp
pcp-5.2.2/qa/217:81:mkaf `cat $tmp.tmp` >tmp.af
pcp-5.2.2/qa/217-82-_filter <tmp.af
##############################################
pcp-5.2.2/qa/217-92-/g' | sed -e 's;/archives/;/src/;' -e 's;/tmparch/;/src/;' >$tmp.tmp
pcp-5.2.2/qa/217:93:mkaf `cat $tmp.tmp` >tmp.af
pcp-5.2.2/qa/217-94-rm -f $tmp.tmp
##############################################
pcp-5.2.2/qa/217-103-/g' | sed -e 's;^.*/;src/;' >$tmp.tmp
pcp-5.2.2/qa/217:104:mkaf `cat $tmp.tmp` >tmp.af
pcp-5.2.2/qa/217-105-rm -f $tmp.tmp
##############################################
pcp-5.2.2/qa/218-8-
pcp-5.2.2/qa/218:9:seq=`basename $0`
pcp-5.2.2/qa/218-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/218-41-pmdumplog -m $tmp.result | sed -e '/pmcd\./d' | _filter_pmdumplog
pcp-5.2.2/qa/218:42:status=`expr $status + $?`
pcp-5.2.2/qa/218-43-
##############################################
pcp-5.2.2/qa/219-9-
pcp-5.2.2/qa/219:10:seq=`basename $0`
pcp-5.2.2/qa/219-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/220-7-
pcp-5.2.2/qa/220:8:seq=`basename $0`
pcp-5.2.2/qa/220-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/221-7-
pcp-5.2.2/qa/221:8:seq=`basename $0`
pcp-5.2.2/qa/221-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/222-7-
pcp-5.2.2/qa/222:8:seq=`basename $0`
pcp-5.2.2/qa/222-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/223-7-
pcp-5.2.2/qa/223:8:seq=`basename $0`
pcp-5.2.2/qa/223-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/223-110- echo "=========================="
pcp-5.2.2/qa/223:111: echo "new/`basename $file`"
pcp-5.2.2/qa/223-112- echo "=========================="
##############################################
pcp-5.2.2/qa/224-7-
pcp-5.2.2/qa/224:8:seq=`basename $0`
pcp-5.2.2/qa/224-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/225-8-
pcp-5.2.2/qa/225:9:seq=`basename $0`
pcp-5.2.2/qa/225-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/226-8-
pcp-5.2.2/qa/226:9:seq=`basename $0`
pcp-5.2.2/qa/226-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/227-7-
pcp-5.2.2/qa/227:8:seq=`basename $0`
pcp-5.2.2/qa/227-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/228-7-
pcp-5.2.2/qa/228:8:seq=`basename $0`
pcp-5.2.2/qa/228-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/229-7-
pcp-5.2.2/qa/229:8:seq=`basename $0`
pcp-5.2.2/qa/229-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/230-8-
pcp-5.2.2/qa/230:9:seq=`basename $0`
pcp-5.2.2/qa/230-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/231-7-
pcp-5.2.2/qa/231:8:seq=`basename $0`
pcp-5.2.2/qa/231-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/232-7-
pcp-5.2.2/qa/232:8:seq=`basename $0`
pcp-5.2.2/qa/232-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/233-10-
pcp-5.2.2/qa/233:11:seq=`basename $0`
pcp-5.2.2/qa/233-12-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/233-52-
pcp-5.2.2/qa/233:53:status=`expr $e1 + $e2`
pcp-5.2.2/qa/233-54-exit
##############################################
pcp-5.2.2/qa/234-7-
pcp-5.2.2/qa/234:8:seq=`basename $0`
pcp-5.2.2/qa/234-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/235-7-
pcp-5.2.2/qa/235:8:seq=`basename $0`
pcp-5.2.2/qa/235-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/236-7-
pcp-5.2.2/qa/236:8:seq=`basename $0`
pcp-5.2.2/qa/236-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/236-35-echo "Simple adds ... expect one.m1 in each case"
pcp-5.2.2/qa/236:36:for root in root ./root `pwd`/root ../`basename $tmp.dir`/root
pcp-5.2.2/qa/236-37-do
##############################################
pcp-5.2.2/qa/236-52-echo "Simple deletes ... expect empty PMNS in each case"
pcp-5.2.2/qa/236:53:for root in root ./root `pwd`/root ../`basename $tmp.dir`/root
pcp-5.2.2/qa/236-54-do
##############################################
pcp-5.2.2/qa/237-7-
pcp-5.2.2/qa/237:8:seq=`basename $0`
pcp-5.2.2/qa/237-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/238-8-
pcp-5.2.2/qa/238:9:seq=`basename $0`
pcp-5.2.2/qa/238-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/239-7-
pcp-5.2.2/qa/239:8:seq=`basename $0`
pcp-5.2.2/qa/239-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/240-7-
pcp-5.2.2/qa/240:8:seq=`basename $0`
pcp-5.2.2/qa/240-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/241-9-
pcp-5.2.2/qa/241:10:seq=`basename $0`
pcp-5.2.2/qa/241-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/241-125- echo "new value: $value"
pcp-5.2.2/qa/241:126: value=`expr $value + 1`
pcp-5.2.2/qa/241-127- sleep 1
##############################################
pcp-5.2.2/qa/242-7-
pcp-5.2.2/qa/242:8:seq=`basename $0`
pcp-5.2.2/qa/242-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/243-7-
pcp-5.2.2/qa/243:8:seq=`basename $0`
pcp-5.2.2/qa/243-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/244-7-
pcp-5.2.2/qa/244:8:seq=`basename $0`
pcp-5.2.2/qa/244-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/244-133- pmprobe pmcd.control.debug
pcp-5.2.2/qa/244:134: sleepers=`ps $PCP_PS_ALL_FLAGS | grep '[d]umb_pmda' | $PCP_AWK_PROG '$3 == 1 { print $2 }'`
pcp-5.2.2/qa/244-135- [ ! -z "$sleepers" ] && $sudo $signal -s KILL $sleepers
##############################################
pcp-5.2.2/qa/244-213-END
pcp-5.2.2/qa/244:214:pmcd=`$sudo $sudoopts sh $tmp.sh`
pcp-5.2.2/qa/244-215-echo "pmcd=$pmcd" >>$here/$seq.full
##############################################
pcp-5.2.2/qa/244-234-a \
pcp-5.2.2/qa/244:235:'"`grep pmdasample $CONFIGSAVE | sed -e 's/[ ][ ]*/ /g' -e 's/[ ]*$//'`"'
pcp-5.2.2/qa/244-236-}' \
##############################################
pcp-5.2.2/qa/245-7-
pcp-5.2.2/qa/245:8:seq=`basename $0`
pcp-5.2.2/qa/245-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/246-9-
pcp-5.2.2/qa/246:10:seq=`basename $0`
pcp-5.2.2/qa/246-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/247-8-
pcp-5.2.2/qa/247:9:seq=`basename $0`
pcp-5.2.2/qa/247-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/248-8-
pcp-5.2.2/qa/248:9:seq=`basename $0`
pcp-5.2.2/qa/248-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/249-8-
pcp-5.2.2/qa/249:9:seq=`basename $0`
pcp-5.2.2/qa/249-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/250-7-
pcp-5.2.2/qa/250:8:seq=`basename $0`
pcp-5.2.2/qa/250-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/251-7-
pcp-5.2.2/qa/251:8:seq=`basename $0`
pcp-5.2.2/qa/251-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/252-7-
pcp-5.2.2/qa/252:8:seq=`basename $0`
pcp-5.2.2/qa/252-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/252-35- tolerance=$3
pcp-5.2.2/qa/252:36: upper_limit=`expr $expected + $tolerance`
pcp-5.2.2/qa/252-37- [ $expected -le $given -a $given -le $upper_limit ]
##############################################
pcp-5.2.2/qa/252-41-{
pcp-5.2.2/qa/252:42: num_recs=`$pmdumplog $tmp | egrep -c '^[0-9][0-9]:[0-9][0-9]:'`
pcp-5.2.2/qa/252-43- # subtract 1 for the prologue and 1 for the epilogue
pcp-5.2.2/qa/252:44: num_recs=`expr $num_recs - 2`
pcp-5.2.2/qa/252-45- [ $debug ] && echo "found $num_recs samples after the prologue+epilogue"
##############################################
pcp-5.2.2/qa/252-65- then
pcp-5.2.2/qa/252:66: actual_size=`ls -l $tmp.0 | $PCP_AWK_PROG ' {print $5} '`
pcp-5.2.2/qa/252-67- else
##############################################
pcp-5.2.2/qa/252-89- then
pcp-5.2.2/qa/252:90: bigger_size=`ls -l $tmp.0 | $PCP_AWK_PROG ' {print $5} '`
pcp-5.2.2/qa/252-91- else
##############################################
pcp-5.2.2/qa/252-97- cat $tmp.log >>$here/$seq.full
pcp-5.2.2/qa/252:98: num_recs=`expr $num_recs - 1`
pcp-5.2.2/qa/252-99- if [ $num_recs -gt 0 ]
##############################################
pcp-5.2.2/qa/252-107- then
pcp-5.2.2/qa/252:108: smaller_size=`ls -l $tmp.0 | $PCP_AWK_PROG ' {print $5} '`
pcp-5.2.2/qa/252-109- else
##############################################
pcp-5.2.2/qa/252-153- num_secs=$2 # secs version of size_arg
pcp-5.2.2/qa/252:154: time=`_time_me $pmlogger -s $size_arg -c $tmp.config -l $tmp.log $tmp`
pcp-5.2.2/qa/252-155- [ -z "$time" ] && time=-1
##############################################
pcp-5.2.2/qa/252-173- num_secs=$2 # secs version of size_arg
pcp-5.2.2/qa/252:174: time=`_time_me $pmlogger -T $size_arg -c $tmp.config -l $tmp.log $tmp`
pcp-5.2.2/qa/252-175- [ -z "$time" ] && time=-1
##############################################
pcp-5.2.2/qa/253-8-
pcp-5.2.2/qa/253:9:seq=`basename $0`
pcp-5.2.2/qa/253-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/254-7-
pcp-5.2.2/qa/254:8:seq=`basename $0`
pcp-5.2.2/qa/254-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/255-9-
pcp-5.2.2/qa/255:10:seq=`basename $0`
pcp-5.2.2/qa/255-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/256-8-
pcp-5.2.2/qa/256:9:seq=`basename $0`
pcp-5.2.2/qa/256-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/257-10-
pcp-5.2.2/qa/257:11:seq=`basename $0`
pcp-5.2.2/qa/257-12-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/257-87-#
pcp-5.2.2/qa/257:88:host_32_v2=`./getpmcdhosts -s $PCP_PLATFORM -b 32 -m "pmcd.version>2.0" -n 1 -a sample 2>&1`
pcp-5.2.2/qa/257-89-if [ $? -eq 1 ]; then
##############################################
pcp-5.2.2/qa/257-93-echo "host_32_v2 = $host_32_v2" >> $seq.full
pcp-5.2.2/qa/257:94:host_32_v2_os=`ssh -q pcpqa@$host_32_v2 uname -r`
pcp-5.2.2/qa/257-95-
pcp-5.2.2/qa/257:96:host_64_v2=`./getpmcdhosts -s $PCP_PLATFORM -b 64 -m "pmcd.version>2.0" -n 1 -a sample 2>&1`
pcp-5.2.2/qa/257-97-if [ $? -eq 1 ]; then
##############################################
pcp-5.2.2/qa/257-101-echo "host_64_v2 = $host_64_v2" >> $seq.full
pcp-5.2.2/qa/257:102:host_64_v2_os=`ssh -q pcpqa@$host_64_v2 uname -r`
pcp-5.2.2/qa/257-103-
##############################################
pcp-5.2.2/qa/258-8-
pcp-5.2.2/qa/258:9:seq=`basename $0`
pcp-5.2.2/qa/258-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/259-8-
pcp-5.2.2/qa/259:9:seq=`basename $0`
pcp-5.2.2/qa/259-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/260-8-
pcp-5.2.2/qa/260:9:seq=`basename $0`
pcp-5.2.2/qa/260-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/261-8-
pcp-5.2.2/qa/261:9:seq=`basename $0`
pcp-5.2.2/qa/261-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/262-7-
pcp-5.2.2/qa/262:8:seq=`basename $0`
pcp-5.2.2/qa/262-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/263-8-
pcp-5.2.2/qa/263:9:seq=`basename $0`
pcp-5.2.2/qa/263-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/264-8-
pcp-5.2.2/qa/264:9:seq=`basename $0`
pcp-5.2.2/qa/264-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/265-7-
pcp-5.2.2/qa/265:8:seq=`basename $0`
pcp-5.2.2/qa/265-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/266-9-
pcp-5.2.2/qa/266:10:seq=`basename $0`
pcp-5.2.2/qa/266-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/267-7-
pcp-5.2.2/qa/267:8:seq=`basename $0`
pcp-5.2.2/qa/267-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/268-7-
pcp-5.2.2/qa/268:8:seq=`basename $0`
pcp-5.2.2/qa/268-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/269-7-
pcp-5.2.2/qa/269:8:seq=`basename $0`
pcp-5.2.2/qa/269-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/270-18-
pcp-5.2.2/qa/270:19:seq=`basename $0`
pcp-5.2.2/qa/270-20-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/271-7-
pcp-5.2.2/qa/271:8:seq=`basename $0`
pcp-5.2.2/qa/271-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/272-7-
pcp-5.2.2/qa/272:8:seq=`basename $0`
pcp-5.2.2/qa/272-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/272-19-if [ $? -ne 0 ]; then
pcp-5.2.2/qa/272:20: _notrun "`cat $tmp.tmp`"
pcp-5.2.2/qa/272-21- # NOTREACHED
##############################################
pcp-5.2.2/qa/272-44-host=`hostname`
pcp-5.2.2/qa/272:45:me=`_host_to_fqdn $host`
pcp-5.2.2/qa/272-46-if [ -z "$me" ]
##############################################
pcp-5.2.2/qa/272-63- do
pcp-5.2.2/qa/272:64: clients=`ssh $1 -q -n -l pcpqa "sh -c 'PMCD_PORT=$port pmprobe -h $me pmcd.numclients'" 2>/dev/null | sed -e 's/.* //'`
pcp-5.2.2/qa/272-65- if [ $i -eq 0 ]
##############################################
pcp-5.2.2/qa/272-80- sleep 1
pcp-5.2.2/qa/272:81: i=`expr $i + 1`
pcp-5.2.2/qa/272-82- done
##############################################
pcp-5.2.2/qa/272-148-
pcp-5.2.2/qa/272:149:list1=`_all_hostnames $other1`
pcp-5.2.2/qa/272-150-if [ -z "$list1" ]
##############################################
pcp-5.2.2/qa/272-156-fi
pcp-5.2.2/qa/272:157:list2=`_all_hostnames $other2`
pcp-5.2.2/qa/272-158-if [ -z "$list2" ]
##############################################
pcp-5.2.2/qa/272-215-#
pcp-5.2.2/qa/272:216:sleep `expr $PMCD_CONNECT_TIMEOUT / 2`
pcp-5.2.2/qa/272-217-# note on sed ... some systems appear to be able to deliver the socket
##############################################
pcp-5.2.2/qa/272-241-
pcp-5.2.2/qa/272:242:iplist1=`_all_ipaddrs $other1`
pcp-5.2.2/qa/272-243-if [ -z "$iplist1" ]
##############################################
pcp-5.2.2/qa/272-248-fi
pcp-5.2.2/qa/272:249:iplist2=`_all_ipaddrs $other2`
pcp-5.2.2/qa/272-250-if [ -z "$iplist2" ]
##############################################
pcp-5.2.2/qa/272-266-
pcp-5.2.2/qa/272:267:netlist2=`echo $iplist2,$iplist3 | sed -e 's/$/,/' -e 's/[0-9][0-9]*\.[0-9][0-9]*,/*,/g' -e 's/,$//'`
pcp-5.2.2/qa/272-268-
##############################################
pcp-5.2.2/qa/273-7-
pcp-5.2.2/qa/273:8:seq=`basename $0`
pcp-5.2.2/qa/273-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/274-7-
pcp-5.2.2/qa/274:8:seq=`basename $0`
pcp-5.2.2/qa/274-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/275-8-
pcp-5.2.2/qa/275:9:seq=`basename $0`
pcp-5.2.2/qa/275-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/276-8-
pcp-5.2.2/qa/276:9:seq=`basename $0`
pcp-5.2.2/qa/276-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/277-17-
pcp-5.2.2/qa/277:18:seq=`basename $0`
pcp-5.2.2/qa/277-19-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/278-7-
pcp-5.2.2/qa/278:8:seq=`basename $0`
pcp-5.2.2/qa/278-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/278-72-
pcp-5.2.2/qa/278:73:bytes=`cat $tmp.? | wc -c | sed -e 's/ //g'`
pcp-5.2.2/qa/278-74-vlist="2"
##############################################
pcp-5.2.2/qa/278-91-
pcp-5.2.2/qa/278:92: size=`wc -c <$tmp.pag | sed -e 's/ //g'`
pcp-5.2.2/qa/278-93- if [ "$size" -lt "$bytes" ]
##############################################
pcp-5.2.2/qa/279-8-
pcp-5.2.2/qa/279:9:seq=`basename $0`
pcp-5.2.2/qa/279-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/280-7-
pcp-5.2.2/qa/280:8:seq=`basename $0`
pcp-5.2.2/qa/280-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/280-29- PCP_PMLOGGERCONTROL_PATH="$PCP_SYSCONF_DIR/pmlogger/control"
pcp-5.2.2/qa/280:30: PCP_PMLOGGERCONTROL_PATH=`dirname "$PCP_PMLOGGERCONTROL_PATH"`
pcp-5.2.2/qa/280-31- sed \
##############################################
pcp-5.2.2/qa/281-8-
pcp-5.2.2/qa/281:9:seq=`basename $0`
pcp-5.2.2/qa/281-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/282-12-
pcp-5.2.2/qa/282:13:seq=`basename $0`
pcp-5.2.2/qa/282-14-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/282-79- sleep 1
pcp-5.2.2/qa/282:80: i=`expr $i + 1`
pcp-5.2.2/qa/282-81- done
##############################################
pcp-5.2.2/qa/282-83- $PCP_ECHO_PROG $PCP_ECHO_N "=== probe pmcd: ""$PCP_ECHO_C"
pcp-5.2.2/qa/282:84: x=`pmprobe pmcd.control.debug 2>&1 | sed -e "s/$LOCALHOST/HOST/g" -e 's|local:/*|HOST|g'`
pcp-5.2.2/qa/282-85- if [ "$x" = "pmcd.control.debug 1" ]
##############################################
pcp-5.2.2/qa/282-108- sleep 2
pcp-5.2.2/qa/282:109: i=`expr $i + 1`
pcp-5.2.2/qa/282-110- done
##############################################
pcp-5.2.2/qa/282-112- $PCP_ECHO_PROG $PCP_ECHO_N "=== probe pmlogger: ""$PCP_ECHO_C"
pcp-5.2.2/qa/282:113: x=`echo connect primary | pmlc 2>&1 | sed -e "s/$LOCALHOST/HOST/g" -e 's|local:/*|HOST|g'`
pcp-5.2.2/qa/282-114- sleep 2
##############################################
pcp-5.2.2/qa/283-11-
pcp-5.2.2/qa/283:12:seq=`basename $0`
pcp-5.2.2/qa/283-13-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/283-86- # Filter the stderr of this using a temp file
pcp-5.2.2/qa/283:87: pmcd_pid=`$sudo $sudoopts sh $tmp.sh 2>$tmp.tmp`
pcp-5.2.2/qa/283-88- cat $tmp.tmp 1>&2
##############################################
pcp-5.2.2/qa/284-7-
pcp-5.2.2/qa/284:8:seq=`basename $0`
pcp-5.2.2/qa/284-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/285-18-
pcp-5.2.2/qa/285:19:seq=`basename $0`
pcp-5.2.2/qa/285-20-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/286-8-
pcp-5.2.2/qa/286:9:seq=`basename $0`
pcp-5.2.2/qa/286-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/287-7-
pcp-5.2.2/qa/287:8:seq=`basename $0`
pcp-5.2.2/qa/287-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/288-7-
pcp-5.2.2/qa/288:8:seq=`basename $0`
pcp-5.2.2/qa/288-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/289-8-
pcp-5.2.2/qa/289:9:seq=`basename $0`
pcp-5.2.2/qa/289-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/290-7-
pcp-5.2.2/qa/290:8:seq=`basename $0`
pcp-5.2.2/qa/290-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/291-8-
pcp-5.2.2/qa/291:9:seq=`basename $0`
pcp-5.2.2/qa/291-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/292-7-
pcp-5.2.2/qa/292:8:seq=`basename $0`
pcp-5.2.2/qa/292-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/292-40-
pcp-5.2.2/qa/292:41:debug=`pmprobe -v pmcd.control.debug | $PCP_AWK_PROG '{ print $3 }'`
pcp-5.2.2/qa/292-42-
##############################################
pcp-5.2.2/qa/292-77-do
pcp-5.2.2/qa/292:78: if [ "`echo *-$sn.index`" != "*-$sn.index" ]
pcp-5.2.2/qa/292-79- then
##############################################
pcp-5.2.2/qa/293-8-
pcp-5.2.2/qa/293:9:seq=`basename $0`
pcp-5.2.2/qa/293-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/294-7-
pcp-5.2.2/qa/294:8:seq=`basename $0`
pcp-5.2.2/qa/294-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/294-116- eval $* 2>&1 | tee -a $seq.full | _filter
pcp-5.2.2/qa/294:117: connects=`grep AcceptNewClient $tmp.log | wc -l | sed -e 's/ *//g'`
pcp-5.2.2/qa/294:118: disconnects=`grep DeleteClient $tmp.log | wc -l | sed -e 's/ *//g'`
pcp-5.2.2/qa/294-119- difference=$(($connects - $disconnects))
##############################################
pcp-5.2.2/qa/295-7-
pcp-5.2.2/qa/295:8:seq=`basename $0`
pcp-5.2.2/qa/295-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/295-53-{
pcp-5.2.2/qa/295:54: connects=`egrep 'AcceptNewClient|accept new client' $tmp.log | wc -l`
pcp-5.2.2/qa/295:55: disconnects=`egrep 'DeleteClient|connection closed' $tmp.log | wc -l`
pcp-5.2.2/qa/295:56: difference=`expr $connects - $disconnects`
pcp-5.2.2/qa/295-57- echo "N connects"
##############################################
pcp-5.2.2/qa/295-73-export PMPROXY_HOST=localhost
pcp-5.2.2/qa/295:74:pidlist=`sh -c "pmval -h $PMPROXY_HOST hinv.ncpu >$tmp.1 2>&1 & echo \\\$!"`
pcp-5.2.2/qa/295-75-echo "pmval pid=$pidlist" >>$here/$seq.full
pcp-5.2.2/qa/295:76:pid=`sh -c "pmstat -h $PMPROXY_HOST >$tmp.2 2>&1 & echo \\\$!"`
pcp-5.2.2/qa/295-77-echo "pmstat pid=$pid" >>$here/$seq.full
##############################################
pcp-5.2.2/qa/295-79-echo "kernel.all.load;" >$tmp.in
pcp-5.2.2/qa/295:80:pid=`sh -c "pmie -v -h $PMPROXY_HOST -c $tmp.in >$tmp.3 2>&1 & echo \\\$!"`
pcp-5.2.2/qa/295-81-echo "pmie pid=$pid" >>$here/$seq.full
##############################################
pcp-5.2.2/qa/296-7-
pcp-5.2.2/qa/296:8:seq=`basename $0`
pcp-5.2.2/qa/296-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/296-94-ps $PCP_PS_ALL_FLAGS >$tmp.out
pcp-5.2.2/qa/296:95:num=`grep pmdasample $tmp.out | wc -l | sed -e 's/ //g'`
pcp-5.2.2/qa/296-96-if [ $num -ne 11 ]
##############################################
pcp-5.2.2/qa/296-117-cp $tmp.out $seq.full
pcp-5.2.2/qa/296:118:num=`grep pmdasample $tmp.out | wc -l | sed -e 's/ //g'`
pcp-5.2.2/qa/296-119-if [ $num -ne 0 ]
##############################################
pcp-5.2.2/qa/297-7-
pcp-5.2.2/qa/297:8:seq=`basename $0`
pcp-5.2.2/qa/297-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/297-67-realname=`hostname`
pcp-5.2.2/qa/297:68:chopname=`echo $realname | sed -e 's/\..*//'`
pcp-5.2.2/qa/297-69-
##############################################
pcp-5.2.2/qa/297-156-sleep 4
pcp-5.2.2/qa/297:157:primary_logger_pid=`$PCP_PS_PROG $PCP_PS_ALL_FLAGS | grep pmlogger | grep ' -P' | $PCP_AWK_PROG '{ print $2 }'`
pcp-5.2.2/qa/297-158-if [ -z "$primary_logger_pid" ]
##############################################
pcp-5.2.2/qa/298-7-
pcp-5.2.2/qa/298:8:seq=`basename $0`
pcp-5.2.2/qa/298-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/299-7-
pcp-5.2.2/qa/299:8:seq=`basename $0`
pcp-5.2.2/qa/299-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/300-7-
pcp-5.2.2/qa/300:8:seq=`basename $0`
pcp-5.2.2/qa/300-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/301-7-
pcp-5.2.2/qa/301:8:seq=`basename $0`
pcp-5.2.2/qa/301-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/301-64- NUMPROC=1
pcp-5.2.2/qa/301:65: DEADSTART=`$AMTIME1970PROG`
pcp-5.2.2/qa/301-66- DEADTIME=0
##############################################
pcp-5.2.2/qa/301-72-' | wc -l`
pcp-5.2.2/qa/301:73: DEADTIME=`$AMTIME1970PROG`
pcp-5.2.2/qa/301:74: DEADTIME=`expr $DEADTIME - $DEADSTART`
pcp-5.2.2/qa/301-75- done
##############################################
pcp-5.2.2/qa/301-118-# success or failure, we've finished
pcp-5.2.2/qa/301:119:status=`expr $status - 1`
pcp-5.2.2/qa/301-120-exit
##############################################
pcp-5.2.2/qa/302-8-
pcp-5.2.2/qa/302:9:seq=`basename $0`
pcp-5.2.2/qa/302-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/303-8-
pcp-5.2.2/qa/303:9:seq=`basename $0`
pcp-5.2.2/qa/303-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/304-7-
pcp-5.2.2/qa/304:8:seq=`basename $0`
pcp-5.2.2/qa/304-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/304-32- sleep 3
pcp-5.2.2/qa/304:33: alive=`ps $PCP_PS_ALL_FLAGS | $PCP_AWK_PROG '$2 == '"$logger_pid"' { print }'`
pcp-5.2.2/qa/304-34- if [ ! -z "$alive" ]
##############################################
pcp-5.2.2/qa/305-6-
pcp-5.2.2/qa/305:7:seq=`basename $0`
pcp-5.2.2/qa/305-8-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/306-9-
pcp-5.2.2/qa/306:10:seq=`basename $0`
pcp-5.2.2/qa/306-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/306-22-
pcp-5.2.2/qa/306:23:_day=`date | $PCP_AWK_PROG '{ print $1 }'`
pcp-5.2.2/qa/306:24:_month=`date | $PCP_AWK_PROG '{ print $2 }'`
pcp-5.2.2/qa/306:25:_date=`date | $PCP_AWK_PROG '{ print $3 }'`
pcp-5.2.2/qa/306-26-
##############################################
pcp-5.2.2/qa/307-8-
pcp-5.2.2/qa/307:9:seq=`basename $0`
pcp-5.2.2/qa/307-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/307-16-
pcp-5.2.2/qa/307:17:numval=`pmprobe -v network.tcp.drops 2>/dev/null | $PCP_AWK_PROG '{print $2}'`
pcp-5.2.2/qa/307-18-if [ -z "$numval" -o "$numval" -lt 0 ]
##############################################
pcp-5.2.2/qa/307-45- echo quit | pmlc -P 2>&1 | _filter
pcp-5.2.2/qa/307:46: i=`expr $i + 1`
pcp-5.2.2/qa/307-47-done
##############################################
pcp-5.2.2/qa/307-54- pmlc -P </dev/null 2>&1 | _filter
pcp-5.2.2/qa/307:55: i=`expr $i + 1`
pcp-5.2.2/qa/307-56-done
##############################################
pcp-5.2.2/qa/307-63- echo "connect primary"
pcp-5.2.2/qa/307:64: i=`expr $i + 1`
pcp-5.2.2/qa/307-65-done \
##############################################
pcp-5.2.2/qa/308-8-
pcp-5.2.2/qa/308:9:seq=`basename $0`
pcp-5.2.2/qa/308-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/308-122-fi
pcp-5.2.2/qa/308:123:x=`pmdumplog $tmp | _filter`
pcp-5.2.2/qa/308-124-if [ -z "$x" ]
##############################################
pcp-5.2.2/qa/308-139-sleep 2
pcp-5.2.2/qa/308:140:x=`pmdumplog $tmp | _filter`
pcp-5.2.2/qa/308-141-if [ -z "$x" ]
##############################################
pcp-5.2.2/qa/308-181-scp -q $tmp.cmd pcpqa@$host1:$tmp.cmd
pcp-5.2.2/qa/308:182:eval `ssh -q pcpqa@$host1 /bin/sh $tmp.cmd`
pcp-5.2.2/qa/308-183-
##############################################
pcp-5.2.2/qa/308-208-scp -q pcpqa@$host1:/tmp/$rem_tmp.0 $tmp.0
pcp-5.2.2/qa/308:209:x=`pmdumplog $tmp | _filter`
pcp-5.2.2/qa/308-210-if [ -z "$x" ]
##############################################
pcp-5.2.2/qa/308-252-scp $tmp.cmd pcpqa@$host1:$tmp.cmd
pcp-5.2.2/qa/308:253:eval `ssh -q pcpqa@$host1 /bin/sh $tmp.cmd`
pcp-5.2.2/qa/308-254-
##############################################
pcp-5.2.2/qa/308-276-scp pcpqa@$host1:/tmp/$rem_tmp.0 $tmp.0
pcp-5.2.2/qa/308:277:x=`pmdumplog $tmp | _filter`
pcp-5.2.2/qa/308-278-if [ -z "$x" ]
##############################################
pcp-5.2.2/qa/309-7-
pcp-5.2.2/qa/309:8:seq=`basename $0`
pcp-5.2.2/qa/309-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/310-7-
pcp-5.2.2/qa/310:8:seq=`basename $0`
pcp-5.2.2/qa/310-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/311-11-
pcp-5.2.2/qa/311:12:seq=`basename $0`
pcp-5.2.2/qa/311-13-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/312-10-
pcp-5.2.2/qa/312:11:seq=`basename $0`
pcp-5.2.2/qa/312-12-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/313-10-
pcp-5.2.2/qa/313:11:seq=`basename $0`
pcp-5.2.2/qa/313-12-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/314-7-
pcp-5.2.2/qa/314:8:seq=`basename $0`
pcp-5.2.2/qa/314-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/314-38- do
pcp-5.2.2/qa/314:39: _i=`expr $_i + 1`
pcp-5.2.2/qa/314-40- if [ "$_i" -ge 100 ]
##############################################
pcp-5.2.2/qa/314-122-# look for data in each log file, checking rotation actually did something
pcp-5.2.2/qa/314:123:oldlines=`wc -l < /tmp/$seq/1.good.log.$previous 2>/dev/null || echo 0`
pcp-5.2.2/qa/314:124:newlines=`wc -l < /tmp/$seq/1.good.log 2>/dev/null || echo 0`
pcp-5.2.2/qa/314-125-# 5 samples / sec x ~6 sec x 2 lines per sample + 6 lines for header and footer
##############################################
pcp-5.2.2/qa/315-8-
pcp-5.2.2/qa/315:9:seq=`basename $0`
pcp-5.2.2/qa/315-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/316-7-
pcp-5.2.2/qa/316:8:seq=`basename $0`
pcp-5.2.2/qa/316-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/316-20-{
pcp-5.2.2/qa/316:21: _a=`echo "$1" | sed -e 's/ /\\\\ /g'`
pcp-5.2.2/qa/316-22- shift
##############################################
pcp-5.2.2/qa/316-25- arg="$arg $_a$s"
pcp-5.2.2/qa/316:26: S=`echo "$s" | tr '[a-z]' '[A-Z]'`
pcp-5.2.2/qa/316-27- arg="$arg $_a$S"
##############################################
pcp-5.2.2/qa/317-8-
pcp-5.2.2/qa/317:9:seq=`basename $0`
pcp-5.2.2/qa/317-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/318-7-
pcp-5.2.2/qa/318:8:seq=`basename $0`
pcp-5.2.2/qa/318-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/319-8-
pcp-5.2.2/qa/319:9:seq=`basename $0`
pcp-5.2.2/qa/319-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/320-7-
pcp-5.2.2/qa/320:8:seq=`basename $0`
pcp-5.2.2/qa/320-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/320-18-
pcp-5.2.2/qa/320:19:HOME=`cd $HOME; pwd`
pcp-5.2.2/qa/320-20-
##############################################
pcp-5.2.2/qa/321-8-
pcp-5.2.2/qa/321:9:seq=`basename $0`
pcp-5.2.2/qa/321-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/322-8-
pcp-5.2.2/qa/322:9:seq=`basename $0`
pcp-5.2.2/qa/322-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/322-84-
pcp-5.2.2/qa/322:85: eval `cat $tmp.tmp`
pcp-5.2.2/qa/322-86-
##############################################
pcp-5.2.2/qa/322-215-echo "=== pmlogger host type: $type ==="
pcp-5.2.2/qa/322:216:host=`./getpmcdhosts -L -n 1 $type`
pcp-5.2.2/qa/322-217-if [ -z "$host" ]
##############################################
pcp-5.2.2/qa/323-8-
pcp-5.2.2/qa/323:9:seq=`basename $0`
pcp-5.2.2/qa/323-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/324-7-
pcp-5.2.2/qa/324:8:seq=`basename $0`
pcp-5.2.2/qa/324-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/325-7-
pcp-5.2.2/qa/325:8:seq=`basename $0`
pcp-5.2.2/qa/325-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/325-20- echo "at end ..." >>$seq.full
pcp-5.2.2/qa/325:21: pid=`ps $PCP_PS_ALL_FLAGS | egrep '[p]mconfirm' | tee -a $seq.full | $PCP_AWK_PROG '{print $2}'`
pcp-5.2.2/qa/325-22- echo "[p]mconfirm pid: $pid" >>$seq.full
pcp-5.2.2/qa/325-23- [ -n "$pid" ] && $signal -s KILL $pid >/dev/null 2>&1
pcp-5.2.2/qa/325:24: pid=`ps $PCP_PS_ALL_FLAGS | egrep '[p]mprintf' | tee -a $seq.full | $PCP_AWK_PROG '{print $2}'`
pcp-5.2.2/qa/325-25- echo "[p]mprintf pid: $pid" >>$seq.full
pcp-5.2.2/qa/325-26- [ -n "$pid" ] && $signal -s KILL $pid >/dev/null 2>&1
pcp-5.2.2/qa/325:27: pid=`ps $PCP_PS_ALL_FLAGS | egrep '[p]mquery' | tee -a $seq.full | $PCP_AWK_PROG '{print $2}'`
pcp-5.2.2/qa/325-28- echo "[p]mquery pid: $pid" >>$seq.full >/dev/null 2>&1
##############################################
pcp-5.2.2/qa/325-202-unset PCP_STDERR
pcp-5.2.2/qa/325:203:src/pmprintf "`cat $tmp.joseph`"
pcp-5.2.2/qa/325-204-
##############################################
pcp-5.2.2/qa/325-208- echo "=== $i bytes of message + space ==="
pcp-5.2.2/qa/325:209: src/pmprintf "`dd if=$tmp.joseph ibs=1 count=$i 2>/dev/null`"
pcp-5.2.2/qa/325-210-done
##############################################
pcp-5.2.2/qa/326-8-
pcp-5.2.2/qa/326:9:seq=`basename $0`
pcp-5.2.2/qa/326-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/326-50-trap "_cleanup" 0 1 2 3 15
pcp-5.2.2/qa/326:51:timezone=`pmprobe -v pmcd.timezone | $PCP_AWK_PROG '{print $3}'`
pcp-5.2.2/qa/326-52-
##############################################
pcp-5.2.2/qa/327-7-
pcp-5.2.2/qa/327:8:seq=`basename $0`
pcp-5.2.2/qa/327-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/328-7-
pcp-5.2.2/qa/328:8:seq=`basename $0`
pcp-5.2.2/qa/328-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/329-7-
pcp-5.2.2/qa/329:8:seq=`basename $0`
pcp-5.2.2/qa/329-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/329-35-do
pcp-5.2.2/qa/329:36: samples=`expr 80 / $delta`
pcp-5.2.2/qa/329-37- [ $samples -gt 50 ] && samples=50
##############################################
pcp-5.2.2/qa/330-7-
pcp-5.2.2/qa/330:8:seq=`basename $0`
pcp-5.2.2/qa/330-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/331-7-
pcp-5.2.2/qa/331:8:seq=`basename $0`
pcp-5.2.2/qa/331-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/332-7-
pcp-5.2.2/qa/332:8:seq=`basename $0`
pcp-5.2.2/qa/332-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/333-7-
pcp-5.2.2/qa/333:8:seq=`basename $0`
pcp-5.2.2/qa/333-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/334-8-
pcp-5.2.2/qa/334:9:seq=`basename $0`
pcp-5.2.2/qa/334-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/335-8-
pcp-5.2.2/qa/335:9:seq=`basename $0`
pcp-5.2.2/qa/335-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/336-8-
pcp-5.2.2/qa/336:9:seq=`basename $0`
pcp-5.2.2/qa/336-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/337-7-
pcp-5.2.2/qa/337:8:seq=`basename $0`
pcp-5.2.2/qa/337-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/338-9-
pcp-5.2.2/qa/338:10:seq=`basename $0`
pcp-5.2.2/qa/338-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/338-60- | $PCP_AWK_PROG '
pcp-5.2.2/qa/338:61:BEGIN { cmd = "'"`echo $cmd`"'" }
pcp-5.2.2/qa/338-62-/^Archive files older than/ { eatlines=1; longone=" "; print; next }
##############################################
pcp-5.2.2/qa/338-141- now_min=`pmdate %M`
pcp-5.2.2/qa/338:142: min2=`expr 2 - $now_min`
pcp-5.2.2/qa/338-143- [ "$min2" -ge 0 ] && min2="+$min2"
pcp-5.2.2/qa/338:144: min4=`expr 4 - $now_min`
pcp-5.2.2/qa/338-145- [ "$min4" -ge 0 ] && min4="+$min4"
pcp-5.2.2/qa/338:146: namea=`pmdate -${day}d ${hour}H ${min2}M $fmt.%H.%M`
pcp-5.2.2/qa/338:147: nameb=`pmdate -${day}d ${hour}H ${min4}M $fmt.%H.%M`
pcp-5.2.2/qa/338:148: yesterday=`pmdate -1d ${hour}H ${min2}M $fmt`
pcp-5.2.2/qa/338:149: stampa=`echo $namea | sed -e 's/\.//g'`
pcp-5.2.2/qa/338:150: stampb=`echo $nameb | sed -e 's/\.//g'`
pcp-5.2.2/qa/338-151- echo "s/$namea/NOW-$day.00.02/g" >>$tmp.sed
##############################################
pcp-5.2.2/qa/339-7-
pcp-5.2.2/qa/339:8:seq=`basename $0`
pcp-5.2.2/qa/339-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/340-7-
pcp-5.2.2/qa/340:8:seq=`basename $0`
pcp-5.2.2/qa/340-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/340-88-
pcp-5.2.2/qa/340:89:other=`./getpmcdhosts -n 1 -L -v 'pcp>=2' 2>$tmp.err`
pcp-5.2.2/qa/340-90-if [ -z "$other" ]
##############################################
pcp-5.2.2/qa/340-92- # Unable to find remote PCP 2.x host
pcp-5.2.2/qa/340:93: _notrun "`cat $tmp.err`"
pcp-5.2.2/qa/340-94- # NOTREACHED
##############################################
pcp-5.2.2/qa/340-99-
pcp-5.2.2/qa/340:100:list=`_all_hostnames $other`
pcp-5.2.2/qa/340-101-if [ -z "$list" ]
##############################################
pcp-5.2.2/qa/340-147-
pcp-5.2.2/qa/340:148:iplist=`_all_ipaddrs $other`
pcp-5.2.2/qa/340-149-if [ -z "$iplist" ]
##############################################
pcp-5.2.2/qa/341-8-
pcp-5.2.2/qa/341:9:seq=`basename $0`
pcp-5.2.2/qa/341-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/342-7-
pcp-5.2.2/qa/342:8:seq=`basename $0`
pcp-5.2.2/qa/342-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/343-8-
pcp-5.2.2/qa/343:9:seq=`basename $0`
pcp-5.2.2/qa/343-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/344-8-
pcp-5.2.2/qa/344:9:seq=`basename $0`
pcp-5.2.2/qa/344-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/344-95-wait
pcp-5.2.2/qa/344:96:got=`sed -n -e '/value/s/.*value //p' $tmp.out`
pcp-5.2.2/qa/344-97-if [ "$got" != "$expect" ]
##############################################
pcp-5.2.2/qa/345-9-
pcp-5.2.2/qa/345:10:seq=`basename $0`
pcp-5.2.2/qa/345-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/346-8-
pcp-5.2.2/qa/346:9:seq=`basename $0`
pcp-5.2.2/qa/346-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/347-7-
pcp-5.2.2/qa/347:8:seq=`basename $0`
pcp-5.2.2/qa/347-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/347-115-echo "=== validate values ==="
pcp-5.2.2/qa/347:116:pminfo -f `pminfo $iam | LC_COLLATE=POSIX sort` >$tmp.out
pcp-5.2.2/qa/347-117-_filter_info <$tmp.out
##############################################
pcp-5.2.2/qa/348-8-
pcp-5.2.2/qa/348:9:seq=`basename $0`
pcp-5.2.2/qa/348-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/348-20-$sudo [ -d $kvm_stats_path ] || _notrun "KVM sysfs interface not available"
pcp-5.2.2/qa/348:21:count=`$sudo ls $kvm_stats_path | wc -l`
pcp-5.2.2/qa/348-22-[ "$count" -eq 0 ] && _notrun "KVM kernel instrumentation is disabled"
##############################################
pcp-5.2.2/qa/348-163-cat $tmp.probe >>$here/$seq.full
pcp-5.2.2/qa/348:164:for stat in `$sudo find $kvm_stats_path -mindepth 1`
pcp-5.2.2/qa/348-165-do
##############################################
pcp-5.2.2/qa/348-171- esac
pcp-5.2.2/qa/348:172: value=`$sudo cat $stat`
pcp-5.2.2/qa/348-173- echo $stat 1 $value | sed -e "s,$kvm_stats_path/,kvm.,g" >> $tmp.stats
##############################################
pcp-5.2.2/qa/349-7-
pcp-5.2.2/qa/349:8:seq=`basename $0`
pcp-5.2.2/qa/349-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/350-8-
pcp-5.2.2/qa/350:9:seq=`basename $0`
pcp-5.2.2/qa/350-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/351-8-
pcp-5.2.2/qa/351:9:seq=`basename $0`
pcp-5.2.2/qa/351-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/352-8-
pcp-5.2.2/qa/352:9:seq=`basename $0`
pcp-5.2.2/qa/352-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/352-57-export PCP_DERIVED_CONFIG=$tmp.derive
pcp-5.2.2/qa/352:58:pminfo -f `grep sample $tmp.config`
pcp-5.2.2/qa/352-59-rm -f $tmp.0 $tmp.meta $tmp.index $tmp.log
##############################################
pcp-5.2.2/qa/353-7-
pcp-5.2.2/qa/353:8:seq=`basename $0`
pcp-5.2.2/qa/353-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/354-9-
pcp-5.2.2/qa/354:10:seq=`basename $0`
pcp-5.2.2/qa/354-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/354-157-| LC_COLLATE=POSIX sort
pcp-5.2.2/qa/354:158:pid=`$PCP_AWK_PROG '{ print $2 }' <$tmp.tmp`
pcp-5.2.2/qa/354-159-if [ -z "$pid" ]
##############################################
pcp-5.2.2/qa/354-166- echo "pmlogger pid: $pid" >>$here/$seq.full
pcp-5.2.2/qa/354:167: npmlogger=`echo "$pid" | wc -w | sed -e 's/ //g'`
pcp-5.2.2/qa/354-168- if [ "$npmlogger" -ne 1 ]
##############################################
pcp-5.2.2/qa/354-199-do
pcp-5.2.2/qa/354:200: new=`echo $file | sed -e "s/$MKTEMP/MKTEMP/" -e "s/$host/HOST/"`
pcp-5.2.2/qa/354-201- [ "$new" != "$file" ] && mv $file $new
##############################################
pcp-5.2.2/qa/354-245-| LC_COLLATE=POSIX sort
pcp-5.2.2/qa/354:246:pid=`$PCP_AWK_PROG '{ print $2 }' <$tmp.tmp`
pcp-5.2.2/qa/354-247-if [ -z "$pid" ]
##############################################
pcp-5.2.2/qa/354-281-do
pcp-5.2.2/qa/354:282: new=`echo $file | sed -e "s/$MKTEMP/MKTEMP/" -e "s/$host/HOST/"`
pcp-5.2.2/qa/354-283- [ "$new" != "$file" ] && mv $file $new
##############################################
pcp-5.2.2/qa/355-8-
pcp-5.2.2/qa/355:9:seq=`basename $0`
pcp-5.2.2/qa/355-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/356-8-
pcp-5.2.2/qa/356:9:seq=`basename $0`
pcp-5.2.2/qa/356-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/357-7-
pcp-5.2.2/qa/357:8:seq=`basename $0`
pcp-5.2.2/qa/357-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/358-9-
pcp-5.2.2/qa/358:10:seq=`basename $0`
pcp-5.2.2/qa/358-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/359-8-
pcp-5.2.2/qa/359:9:seq=`basename $0`
pcp-5.2.2/qa/359-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/359-109-echo "Once more, but with --container ... expect nothing"
pcp-5.2.2/qa/359:110:containers=`pmprobe -v pmcd.feature.containers 2>/dev/null | awk '{ print $3 }'`
pcp-5.2.2/qa/359-111-if [ "$containers" = "1" ]; then
##############################################
pcp-5.2.2/qa/360-7-
pcp-5.2.2/qa/360:8:seq=`basename $0`
pcp-5.2.2/qa/360-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/360-25- -e 's/$/";/'
pcp-5.2.2/qa/360:26:[ -s $tmp.err ] && _notrun `cat $tmp.err`
pcp-5.2.2/qa/360-27-
##############################################
pcp-5.2.2/qa/361-7-
pcp-5.2.2/qa/361:8:seq=`basename $0`
pcp-5.2.2/qa/361-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/362-8-
pcp-5.2.2/qa/362:9:seq=`basename $0`
pcp-5.2.2/qa/362-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/363-7-
pcp-5.2.2/qa/363:8:seq=`basename $0`
pcp-5.2.2/qa/363-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/364-7-
pcp-5.2.2/qa/364:8:seq=`basename $0`
pcp-5.2.2/qa/364-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/365-7-
pcp-5.2.2/qa/365:8:seq=`basename $0`
pcp-5.2.2/qa/365-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/365-52-qahost=`hostname`
pcp-5.2.2/qa/365:53:eval `./getpmcdhosts -L -n 2 2>$tmp.out | sed -e 's/^/other1=/' -e 's/ / other2=/'`
pcp-5.2.2/qa/365-54-echo "other1=$other1" >$seq.full
##############################################
pcp-5.2.2/qa/366-29-
pcp-5.2.2/qa/366:30:seq=`basename $0`
pcp-5.2.2/qa/366-31-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/367-7-
pcp-5.2.2/qa/367:8:seq=`basename $0`
pcp-5.2.2/qa/367-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/368-9-
pcp-5.2.2/qa/368:10:seq=`basename $0`
pcp-5.2.2/qa/368-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/368-17-
pcp-5.2.2/qa/368:18:postgres=`pmprobe postgresql.stat.all_tables.seq_scan | awk '{ print $2 }'`
pcp-5.2.2/qa/368-19-[ "$postgres" -ge 0 ] && _notrun "Test $seq sensitive to local postgres install"
##############################################
pcp-5.2.2/qa/369-8-
pcp-5.2.2/qa/369:9:seq=`basename $0`
pcp-5.2.2/qa/369-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/370-9-
pcp-5.2.2/qa/370:10:seq=`basename $0`
pcp-5.2.2/qa/370-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/370-63- #
pcp-5.2.2/qa/370:64: minor=`echo $distro | sed -e 's/.*release 6.//g' -e 's/ .*//g'`
pcp-5.2.2/qa/370-65- if [ $minor -ge 5 ]; then
##############################################
pcp-5.2.2/qa/371-8-
pcp-5.2.2/qa/371:9:seq=`basename $0`
pcp-5.2.2/qa/371-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/372-7-
pcp-5.2.2/qa/372:8:seq=`basename $0`
pcp-5.2.2/qa/372-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/373-8-
pcp-5.2.2/qa/373:9:seq=`basename $0`
pcp-5.2.2/qa/373-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/374-11-
pcp-5.2.2/qa/374:12:seq=`basename $0`
pcp-5.2.2/qa/374-13-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/374-106-
pcp-5.2.2/qa/374:107: eval `cat $tmp.out`
pcp-5.2.2/qa/374-108-
##############################################
pcp-5.2.2/qa/374-220- cmd="./getpmcdhosts -L -n 1 $type 2>/dev/null"
pcp-5.2.2/qa/374:221: host=`eval $cmd`
pcp-5.2.2/qa/374-222- if [ -z "$host" ]
##############################################
pcp-5.2.2/qa/375-7-
pcp-5.2.2/qa/375:8:seq=`basename $0`
pcp-5.2.2/qa/375-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/375-121- host=`hostname`
pcp-5.2.2/qa/375:122: me=`_host_to_fqdn $host`
pcp-5.2.2/qa/375-123-fi
##############################################
pcp-5.2.2/qa/375-131- echo "=== pmlc host type: $type ==="
pcp-5.2.2/qa/375:132: host=`./getpmcdhosts -L -n 1 $type`
pcp-5.2.2/qa/375-133- if [ -z "$host" ]
##############################################
pcp-5.2.2/qa/376-8-
pcp-5.2.2/qa/376:9:seq=`basename $0`
pcp-5.2.2/qa/376-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/377-7-
pcp-5.2.2/qa/377:8:seq=`basename $0`
pcp-5.2.2/qa/377-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/378-9-
pcp-5.2.2/qa/378:10:seq=`basename $0`
pcp-5.2.2/qa/378-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/379-8-
pcp-5.2.2/qa/379:9:seq=`basename $0`
pcp-5.2.2/qa/379-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/379-32- done
pcp-5.2.2/qa/379:33: intf=`$PCP_PMDAS_DIR/cisco/probe -N $args $file 2>/dev/null`
pcp-5.2.2/qa/379-34- if [ -z "$intf" ]
##############################################
pcp-5.2.2/qa/380-12-
pcp-5.2.2/qa/380:13:seq=`basename $0`
pcp-5.2.2/qa/380-14-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/381-7-
pcp-5.2.2/qa/381:8:seq=`basename $0`
pcp-5.2.2/qa/381-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/381-15-
pcp-5.2.2/qa/381:16:rem_host=`./getpmcdhosts -L -n 1 -P -a sample 2>$tmp.tmp`
pcp-5.2.2/qa/381-17-if [ -z "$rem_host" ]
pcp-5.2.2/qa/381-18-then
pcp-5.2.2/qa/381:19: _notrun `cat $tmp.tmp`
pcp-5.2.2/qa/381-20- # NOTREACHED
##############################################
pcp-5.2.2/qa/381-61- else
pcp-5.2.2/qa/381:62: pminfo -h `echo $1 | sed -e 's/@//'` -f pmcd.pmlogger.port >>$here/$seq.full 2>&1
pcp-5.2.2/qa/381-63- fi
##############################################
pcp-5.2.2/qa/381-184-#
pcp-5.2.2/qa/381:185:prim_pid=`$PCP_PS_PROG $PCP_PS_ALL_FLAGS | grep pmlogger | grep ' -P' | $PCP_AWK_PROG '{ print $2 }'`
pcp-5.2.2/qa/381-186-if [ ! -z "$prim_pid" ]
##############################################
pcp-5.2.2/qa/382-8-
pcp-5.2.2/qa/382:9:seq=`basename $0`
pcp-5.2.2/qa/382-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/383-8-
pcp-5.2.2/qa/383:9:seq=`basename $0`
pcp-5.2.2/qa/383-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/384-7-
pcp-5.2.2/qa/384:8:seq=`basename $0`
pcp-5.2.2/qa/384-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/384-41- print "Here is what pminfo reported ..."
pcp-5.2.2/qa/384:42: system("sed -e \"s/^/ /\" '$tmp.tmp'")
pcp-5.2.2/qa/384-43- }
##############################################
pcp-5.2.2/qa/385-7-
pcp-5.2.2/qa/385:8:seq=`basename $0`
pcp-5.2.2/qa/385-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/386-7-
pcp-5.2.2/qa/386:8:seq=`basename $0`
pcp-5.2.2/qa/386-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/387-7-
pcp-5.2.2/qa/387:8:seq=`basename $0`
pcp-5.2.2/qa/387-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/388-7-
pcp-5.2.2/qa/388:8:seq=`basename $0`
pcp-5.2.2/qa/388-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/388-35-do
pcp-5.2.2/qa/388:36: samples=`expr 80 / $delta`
pcp-5.2.2/qa/388-37- [ $samples -gt 15 ] && samples=15
##############################################
pcp-5.2.2/qa/389-7-
pcp-5.2.2/qa/389:8:seq=`basename $0`
pcp-5.2.2/qa/389-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/390-16-
pcp-5.2.2/qa/390:17:seq=`basename $0`
pcp-5.2.2/qa/390-18-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/390-51-pid_len=`ls /proc | head -1 | wc -c`
pcp-5.2.2/qa/390:52:pid_len=`expr $pid_len - 1`
pcp-5.2.2/qa/390-53-echo "pid_len = $pid_len" >> $seq.full
pcp-5.2.2/qa/390-54-
pcp-5.2.2/qa/390:55:mypid_len=`echo $mypid | wc -c`
pcp-5.2.2/qa/390:56:mypid_len=`expr $mypid_len - 1`
pcp-5.2.2/qa/390-57-echo "mypid_len = $mypid_len" >> $seq.full
pcp-5.2.2/qa/390-58-
pcp-5.2.2/qa/390:59:gap=`expr $pid_len - $mypid_len`
pcp-5.2.2/qa/390-60-echo "gap = $gap" >> $seq.full
##############################################
pcp-5.2.2/qa/390-68- zeroes="0$zeroes"
pcp-5.2.2/qa/390:69: i=`expr $i + 1`
pcp-5.2.2/qa/390-70-done
##############################################
pcp-5.2.2/qa/391-7-
pcp-5.2.2/qa/391:8:seq=`basename $0`
pcp-5.2.2/qa/391-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/392-13-
pcp-5.2.2/qa/392:14:seq=`basename $0`
pcp-5.2.2/qa/392-15-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/393-7-
pcp-5.2.2/qa/393:8:seq=`basename $0`
pcp-5.2.2/qa/393-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/394-7-
pcp-5.2.2/qa/394:8:seq=`basename $0`
pcp-5.2.2/qa/394-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/395-7-
pcp-5.2.2/qa/395:8:seq=`basename $0`
pcp-5.2.2/qa/395-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/396-7-
pcp-5.2.2/qa/396:8:seq=`basename $0`
pcp-5.2.2/qa/396-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/397-7-
pcp-5.2.2/qa/397:8:seq=`basename $0`
pcp-5.2.2/qa/397-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/398-7-
pcp-5.2.2/qa/398:8:seq=`basename $0`
pcp-5.2.2/qa/398-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/398-49- sts=$?
pcp-5.2.2/qa/398:50: if [ "`echo $PCP_LOG_DIR/core*`" != "$PCP_LOG_DIR/core*" -o "`echo $PCP_LOG_DIR/pmcd/core*`" != "$PCP_LOG_DIR/pmcd/core*" -o $sts -eq 0 ]
pcp-5.2.2/qa/398-51- then
##############################################
pcp-5.2.2/qa/399-7-
pcp-5.2.2/qa/399:8:seq=`basename $0`
pcp-5.2.2/qa/399-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/400-7-
pcp-5.2.2/qa/400:8:seq=`basename $0`
pcp-5.2.2/qa/400-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/401-8-
pcp-5.2.2/qa/401:9:seq=`basename $0`
pcp-5.2.2/qa/401-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/402-7-
pcp-5.2.2/qa/402:8:seq=`basename $0`
pcp-5.2.2/qa/402-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/403-9-
pcp-5.2.2/qa/403:10:seq=`basename $0`
pcp-5.2.2/qa/403-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/404-7-
pcp-5.2.2/qa/404:8:seq=`basename $0`
pcp-5.2.2/qa/404-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/405-7-
pcp-5.2.2/qa/405:8:seq=`basename $0`
pcp-5.2.2/qa/405-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/406-7-
pcp-5.2.2/qa/406:8:seq=`basename $0`
pcp-5.2.2/qa/406-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/407-7-
pcp-5.2.2/qa/407:8:seq=`basename $0`
pcp-5.2.2/qa/407-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/408-7-
pcp-5.2.2/qa/408:8:seq=`basename $0`
pcp-5.2.2/qa/408-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/409-9-
pcp-5.2.2/qa/409:10:seq=`basename $0`
pcp-5.2.2/qa/409-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/410-7-
pcp-5.2.2/qa/410:8:seq=`basename $0`
pcp-5.2.2/qa/410-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/411-7-
pcp-5.2.2/qa/411:8:seq=`basename $0`
pcp-5.2.2/qa/411-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/412-10-
pcp-5.2.2/qa/412:11:seq=`basename $0`
pcp-5.2.2/qa/412-12-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/412-81- #
pcp-5.2.2/qa/412:82: t=`echo $starttime | sed -e 's/.*://'`
pcp-5.2.2/qa/412-83- sed <$tmp.dump \
##############################################
pcp-5.2.2/qa/413-7-
pcp-5.2.2/qa/413:8:seq=`basename $0`
pcp-5.2.2/qa/413-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/414-7-
pcp-5.2.2/qa/414:8:seq=`basename $0`
pcp-5.2.2/qa/414-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/414.out-14-Diagnostic output lines ...
pcp-5.2.2/qa/414.out:15:TIME AFcallback ADDR(32769, (nil))
pcp-5.2.2/qa/414.out:16:TIME AFcallback ADDR(32770, (nil))
pcp-5.2.2/qa/414.out:17:TIME AFcallback ADDR(32771, (nil))
pcp-5.2.2/qa/414.out-18-TIME AFcallback event 32769 too slow, skip callback for TIME
pcp-5.2.2/qa/414.out-19-TIME AFcallback event 32770 too slow, skip callback for TIME
pcp-5.2.2/qa/414.out:20:TIME AFenqueue ADDR(32769, (nil)) for TIME
pcp-5.2.2/qa/414.out:21:TIME AFenqueue ADDR(32770, (nil)) for TIME
pcp-5.2.2/qa/414.out:22:TIME AFenqueue ADDR(32771, (nil)) for TIME
pcp-5.2.2/qa/414.out:23:TIME AFenqueue ADDR(32772, (nil)) for TIME
pcp-5.2.2/qa/414.out-24-TIME AFonalarm(14)
##############################################
pcp-5.2.2/qa/415-7-
pcp-5.2.2/qa/415:8:seq=`basename $0`
pcp-5.2.2/qa/415-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/416-7-
pcp-5.2.2/qa/416:8:seq=`basename $0`
pcp-5.2.2/qa/416-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/417-7-
pcp-5.2.2/qa/417:8:seq=`basename $0`
pcp-5.2.2/qa/417-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/418-7-
pcp-5.2.2/qa/418:8:seq=`basename $0`
pcp-5.2.2/qa/418-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/419-7-
pcp-5.2.2/qa/419:8:seq=`basename $0`
pcp-5.2.2/qa/419-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/420-9-
pcp-5.2.2/qa/420:10:seq=`basename $0`
pcp-5.2.2/qa/420-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/421-8-
pcp-5.2.2/qa/421:9:seq=`basename $0`
pcp-5.2.2/qa/421-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/422-8-
pcp-5.2.2/qa/422:9:seq=`basename $0`
pcp-5.2.2/qa/422-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/423-7-
pcp-5.2.2/qa/423:8:seq=`basename $0`
pcp-5.2.2/qa/423-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/424-7-
pcp-5.2.2/qa/424:8:seq=`basename $0`
pcp-5.2.2/qa/424-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/425-7-
pcp-5.2.2/qa/425:8:seq=`basename $0`
pcp-5.2.2/qa/425-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/426-8-
pcp-5.2.2/qa/426:9:seq=`basename $0`
pcp-5.2.2/qa/426-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/427-8-
pcp-5.2.2/qa/427:9:seq=`basename $0`
pcp-5.2.2/qa/427-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/428-7-
pcp-5.2.2/qa/428:8:seq=`basename $0`
pcp-5.2.2/qa/428-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/429-9-
pcp-5.2.2/qa/429:10:seq=`basename $0`
pcp-5.2.2/qa/429-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/430-17-
pcp-5.2.2/qa/430:18:seq=`basename $0`
pcp-5.2.2/qa/430-19-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/430-28-realhost=`hostname`
pcp-5.2.2/qa/430:29:LOCALHOST=`echo $realhost | sed -e 's/\..*//'`
pcp-5.2.2/qa/430-30-hostsfile="/etc/hosts"
##############################################
pcp-5.2.2/qa/430-136- egrep '^[^#].*[ ]'$realhost'([ ]|$)' <$hostsfile >$tmp.tmp
pcp-5.2.2/qa/430:137: if [ `wc -l <$tmp.tmp | sed -e 's/ *//g'` -ne 1 ]
pcp-5.2.2/qa/430-138- then
##############################################
pcp-5.2.2/qa/430-294- echo "Kill off one pmlogger ..." | tee -a $here/$seq.full
pcp-5.2.2/qa/430:295: pid=`grep -l $log $PCP_TMP_DIR/pmlogger/[0-9]* | sed -e 's/.*pmlogger.//'`
pcp-5.2.2/qa/430-296- try=1
pcp-5.2.2/qa/430:297: num_pid=`echo "$pid" | wc -w | sed -e 's/ *//g'`
pcp-5.2.2/qa/430-298- while [ $try -lt 10 -a $num_pid -ne 1 ]
pcp-5.2.2/qa/430-299- do
pcp-5.2.2/qa/430:300: echo "try $try num_pid=$num_pid: `echo $pid`" >>$here/$seq.full
pcp-5.2.2/qa/430-301- sleep 1
pcp-5.2.2/qa/430:302: pid=`grep -l $log $PCP_TMP_DIR/pmlogger/[0-9]* | sed -e 's/.*pmlogger.//'`
pcp-5.2.2/qa/430:303: num_pid=`echo "$pid" | wc -w | sed -e 's/ *//g'`
pcp-5.2.2/qa/430:304: try=`expr $try + 1`
pcp-5.2.2/qa/430-305- done
##############################################
pcp-5.2.2/qa/430-355- do
pcp-5.2.2/qa/430:356: pid=`grep -l $log $PCP_TMP_DIR/pmlogger/[0-9]* | sed -e 's/.*pmlogger.//'`
pcp-5.2.2/qa/430-357- if [ -n "$pid" ]
##############################################
pcp-5.2.2/qa/430-363- fi
pcp-5.2.2/qa/430:364: x=`expr $x + 1`
pcp-5.2.2/qa/430-365- sleep 1
##############################################
pcp-5.2.2/qa/431-7-
pcp-5.2.2/qa/431:8:seq=`basename $0`
pcp-5.2.2/qa/431-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/432-7-
pcp-5.2.2/qa/432:8:seq=`basename $0`
pcp-5.2.2/qa/432-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/433-7-
pcp-5.2.2/qa/433:8:seq=`basename $0`
pcp-5.2.2/qa/433-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/434-7-
pcp-5.2.2/qa/434:8:seq=`basename $0`
pcp-5.2.2/qa/434-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/435-8-
pcp-5.2.2/qa/435:9:seq=`basename $0`
pcp-5.2.2/qa/435-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/436-8-
pcp-5.2.2/qa/436:9:seq=`basename $0`
pcp-5.2.2/qa/436-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/437-8-
pcp-5.2.2/qa/437:9:seq=`basename $0`
pcp-5.2.2/qa/437-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/438-7-
pcp-5.2.2/qa/438:8:seq=`basename $0`
pcp-5.2.2/qa/438-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/438-42- [ "$i" = "badarchives/badlen-0.0" ] && continue
pcp-5.2.2/qa/438:43: i=`echo $i | sed -e 's/\.0$//'`
pcp-5.2.2/qa/438-44- echo | tee -a $seq.full
##############################################
pcp-5.2.2/qa/439-7-
pcp-5.2.2/qa/439:8:seq=`basename $0`
pcp-5.2.2/qa/439-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/439-18-trap "rm -f $tmp.*; $sudo rm -f $PCP_TMP_DIR/pmlogger/$$; exit \$status" 0 1 2 3 15
pcp-5.2.2/qa/439:19:primary_port=`sed -e 1q $PCP_TMP_DIR/pmlogger/primary`
pcp-5.2.2/qa/439-20-
##############################################
pcp-5.2.2/qa/440-9-
pcp-5.2.2/qa/440:10:seq=`basename $0`
pcp-5.2.2/qa/440-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/440-39- tolerance=$3
pcp-5.2.2/qa/440:40: upper_limit=`expr $expected + $tolerance`
pcp-5.2.2/qa/440:41: lower_limit=`expr $expected - $tolerance`
pcp-5.2.2/qa/440-42- [ $lower_limit -le $given -a $given -le $upper_limit ]
##############################################
pcp-5.2.2/qa/440-46-{
pcp-5.2.2/qa/440:47: num_recs=`$pmdumplog $tmp | egrep -c '^[0-9][0-9]:[0-9][0-9]:'`
pcp-5.2.2/qa/440-48- # subtract 1 for the prologue and 1 for the epilogue
pcp-5.2.2/qa/440:49: num_recs=`expr $num_recs - 2`
pcp-5.2.2/qa/440-50- echo "found $num_recs samples after the prologue+epilogue" >>$seq.full
##############################################
pcp-5.2.2/qa/440-63- then
pcp-5.2.2/qa/440:64: vol=`ls $tmp.[0-9]* | wc -l | sed -e 's/ //g'`
pcp-5.2.2/qa/440-65- else
##############################################
pcp-5.2.2/qa/440-103- then
pcp-5.2.2/qa/440:104: vol=`ls $tmp.[0-9]* | wc -l | sed -e 's/ //g'`
pcp-5.2.2/qa/440:105: bigger_size=`ls -l $tmp.[0-9]* | $PCP_AWK_PROG '{t += $5} END {print t}'`
pcp-5.2.2/qa/440-106- else
##############################################
pcp-5.2.2/qa/440-121- # -1 for prologue and -1 for epilogue
pcp-5.2.2/qa/440:122: num_recs=`expr $num_recs - 2`
pcp-5.2.2/qa/440-123- if [ $num_recs -gt 0 ]
##############################################
pcp-5.2.2/qa/440-130- then
pcp-5.2.2/qa/440:131: smaller_size=`ls -l $tmp.[0-9]* | $PCP_AWK_PROG ' {t += $5} END {print t}'`
pcp-5.2.2/qa/440-132- else
##############################################
pcp-5.2.2/qa/440-182- echo "_test_time_size $@" >>$seq.full
pcp-5.2.2/qa/440:183: time=`_time_me $pmlogger -v $vol_arg -s $size_arg -c $tmp.config -l $tmp.log $tmp`
pcp-5.2.2/qa/440-184- [ -z "$time" ] && time=-1
##############################################
pcp-5.2.2/qa/440-188- then
pcp-5.2.2/qa/440:189: vol=`ls $tmp.[0-9]* | wc -l | sed -e 's/ //g'`
pcp-5.2.2/qa/440-190- else
##############################################
pcp-5.2.2/qa/441-9-
pcp-5.2.2/qa/441:10:seq=`basename $0`
pcp-5.2.2/qa/441-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/441-23-./tmparch/mkbig1 > $seq.full 2>&1
pcp-5.2.2/qa/441:24:[ $? -eq 0 ] || _notrun `cat $seq.full`
pcp-5.2.2/qa/441-25-
##############################################
pcp-5.2.2/qa/441-38-do
pcp-5.2.2/qa/441:39: size=`_filesize $vol`
pcp-5.2.2/qa/441-40- if [ -z "$size" ]
##############################################
pcp-5.2.2/qa/442-8-
pcp-5.2.2/qa/442:9:seq=`basename $0`
pcp-5.2.2/qa/442-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/442-18-./tmparch/mkbig1 > $seq.full 2>&1
pcp-5.2.2/qa/442:19:[ $? -eq 0 ] || _notrun `cat $seq.full`
pcp-5.2.2/qa/442-20-
##############################################
pcp-5.2.2/qa/442-29-do
pcp-5.2.2/qa/442:30: ln $file `echo $file | sed -e 's/big1/big2/'`
pcp-5.2.2/qa/442-31- :
##############################################
pcp-5.2.2/qa/442-58-do
pcp-5.2.2/qa/442:59: size=`_filesize $vol`
pcp-5.2.2/qa/442-60- echo "+2*$size" >>$tmp.bc
##############################################
pcp-5.2.2/qa/442-64-do
pcp-5.2.2/qa/442:65: size=`_filesize $vol`
pcp-5.2.2/qa/442-66- if [ -z "$size" ]
##############################################
pcp-5.2.2/qa/442-88-do
pcp-5.2.2/qa/442:89: log=`echo $arch | sed -e 's/tmparch\///g'`
pcp-5.2.2/qa/442:90: echo "$log: `pmdumplog -t $arch | grep '^[0-9]' | wc -l | sed -e 's/ //g'`"
pcp-5.2.2/qa/442-91-done
##############################################
pcp-5.2.2/qa/443-7-
pcp-5.2.2/qa/443:8:seq=`basename $0`
pcp-5.2.2/qa/443-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/444-7-
pcp-5.2.2/qa/444:8:seq=`basename $0`
pcp-5.2.2/qa/444-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/445-8-
pcp-5.2.2/qa/445:9:seq=`basename $0`
pcp-5.2.2/qa/445-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/446-7-
pcp-5.2.2/qa/446:8:seq=`basename $0`
pcp-5.2.2/qa/446-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/447-7-
pcp-5.2.2/qa/447:8:seq=`basename $0`
pcp-5.2.2/qa/447-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/448-7-
pcp-5.2.2/qa/448:8:seq=`basename $0`
pcp-5.2.2/qa/448-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/448-54- unset $var
pcp-5.2.2/qa/448:55: xvalue=`src/getconfig "$var" | sed -e 's/.* -> //' -e 's/[ ]*$//' -e 's/\\\\/<backslash>/g'`
pcp-5.2.2/qa/448-56- #debug# echo "$var: $value ? $xvalue"
##############################################
pcp-5.2.2/qa/449-7-
pcp-5.2.2/qa/449:8:seq=`basename $0`
pcp-5.2.2/qa/449-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/450-8-
pcp-5.2.2/qa/450:9:seq=`basename $0`
pcp-5.2.2/qa/450-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/451-7-
pcp-5.2.2/qa/451:8:seq=`basename $0`
pcp-5.2.2/qa/451-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/452-8-
pcp-5.2.2/qa/452:9:seq=`basename $0`
pcp-5.2.2/qa/452-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/453-7-
pcp-5.2.2/qa/453:8:seq=`basename $0`
pcp-5.2.2/qa/453-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/454-7-
pcp-5.2.2/qa/454:8:seq=`basename $0`
pcp-5.2.2/qa/454-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/455-7-
pcp-5.2.2/qa/455:8:seq=`basename $0`
pcp-5.2.2/qa/455-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/456-8-
pcp-5.2.2/qa/456:9:seq=`basename $0`
pcp-5.2.2/qa/456-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/457-6-#
pcp-5.2.2/qa/457:7:seq=`basename $0`
pcp-5.2.2/qa/457-8-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/457-169- sleep 1
pcp-5.2.2/qa/457:170: i=`expr $i + 1`
pcp-5.2.2/qa/457-171-done
##############################################
pcp-5.2.2/qa/457-240-echo "=== 7. command pipe ===" | tee -a $here/$seq.full
pcp-5.2.2/qa/457:241:pid=`cat $here/$seq.pipe.pid`
pcp-5.2.2/qa/457-242-$PCP_ECHO_PROG $PCP_ECHO_N "Check a piped command""$PCP_ECHO_C"
##############################################
pcp-5.2.2/qa/458-6-#
pcp-5.2.2/qa/458:7:seq=`basename $0`
pcp-5.2.2/qa/458-8-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/459-13-
pcp-5.2.2/qa/459:14:seq=`basename $0`
pcp-5.2.2/qa/459-15-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/459-36-echo
pcp-5.2.2/qa/459:37:echo "Samples: `pmdumplog $tmp | grep '^[0-2]' | wc -l | sed -e 's/ //g'`"
pcp-5.2.2/qa/459-38-
##############################################
pcp-5.2.2/qa/460-8-
pcp-5.2.2/qa/460:9:seq=`basename $0`
pcp-5.2.2/qa/460-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/461-6-#
pcp-5.2.2/qa/461:7:seq=`basename $0`
pcp-5.2.2/qa/461-8-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/462-20-
pcp-5.2.2/qa/462:21:seq=`basename $0`
pcp-5.2.2/qa/462-22-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/463-7-
pcp-5.2.2/qa/463:8:seq=`basename $0`
pcp-5.2.2/qa/463-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/464-7-
pcp-5.2.2/qa/464:8:seq=`basename $0`
pcp-5.2.2/qa/464-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/465-8-
pcp-5.2.2/qa/465:9:seq=`basename $0`
pcp-5.2.2/qa/465-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/466-8-
pcp-5.2.2/qa/466:9:seq=`basename $0`
pcp-5.2.2/qa/466-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/467-8-
pcp-5.2.2/qa/467:9:seq=`basename $0`
pcp-5.2.2/qa/467-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/468-8-
pcp-5.2.2/qa/468:9:seq=`basename $0`
pcp-5.2.2/qa/468-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/469-7-
pcp-5.2.2/qa/469:8:seq=`basename $0`
pcp-5.2.2/qa/469-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/470-7-
pcp-5.2.2/qa/470:8:seq=`basename $0`
pcp-5.2.2/qa/470-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/471-7-
pcp-5.2.2/qa/471:8:seq=`basename $0`
pcp-5.2.2/qa/471-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/472-7-
pcp-5.2.2/qa/472:8:seq=`basename $0`
pcp-5.2.2/qa/472-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/473-7-
pcp-5.2.2/qa/473:8:seq=`basename $0`
pcp-5.2.2/qa/473-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/474-7-
pcp-5.2.2/qa/474:8:seq=`basename $0`
pcp-5.2.2/qa/474-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/475-7-
pcp-5.2.2/qa/475:8:seq=`basename $0`
pcp-5.2.2/qa/475-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/4751-7-
pcp-5.2.2/qa/4751:8:seq=`basename $0`
pcp-5.2.2/qa/4751-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/476-8-
pcp-5.2.2/qa/476:9:seq=`basename $0`
pcp-5.2.2/qa/476-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/477-7-
pcp-5.2.2/qa/477:8:seq=`basename $0`
pcp-5.2.2/qa/477-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/478-7-
pcp-5.2.2/qa/478:8:seq=`basename $0`
pcp-5.2.2/qa/478-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/479-7-
pcp-5.2.2/qa/479:8:seq=`basename $0`
pcp-5.2.2/qa/479-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/479-43- echo
pcp-5.2.2/qa/479:44: echo "=== bad #`echo $bad | sed -e 's/.*\.bad\.//'` ==="
pcp-5.2.2/qa/479-45- cp $bad $tmp/bozo.client_v2.meta
##############################################
pcp-5.2.2/qa/480-7-
pcp-5.2.2/qa/480:8:seq=`basename $0`
pcp-5.2.2/qa/480-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/480-69- echo
pcp-5.2.2/qa/480:70: echo "=== `cat $tmp.control` ==="
pcp-5.2.2/qa/480-71- case $i
##############################################
pcp-5.2.2/qa/481-7-
pcp-5.2.2/qa/481:8:seq=`basename $0`
pcp-5.2.2/qa/481-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/482-7-
pcp-5.2.2/qa/482:8:seq=`basename $0`
pcp-5.2.2/qa/482-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/482-43-{
pcp-5.2.2/qa/482:44: size=`echo "scale=10; ( $3 - $2 ) / $1" | bc`
pcp-5.2.2/qa/482-45- #echo BINSIZE=$size NBINS=$1
##############################################
pcp-5.2.2/qa/482-98-_xtract sample.scale_step.time_up_nanosecs | _noncounter_values > $tmp.noncount
pcp-5.2.2/qa/482:99:eval `fgrep COUNT $tmp.noncount`
pcp-5.2.2/qa/482-100-#echo count=$COUNT maximum=$MAX minimum=$MIN
##############################################
pcp-5.2.2/qa/482-111-_xtract sample.milliseconds | _counter_values > $tmp.count
pcp-5.2.2/qa/482:112:eval `fgrep COUNT $tmp.count`
pcp-5.2.2/qa/482-113-#echo count=$COUNT maximum=$MAX minimum=$MIN
##############################################
pcp-5.2.2/qa/483-7-
pcp-5.2.2/qa/483:8:seq=`basename $0`
pcp-5.2.2/qa/483-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/484-7-
pcp-5.2.2/qa/484:8:seq=`basename $0`
pcp-5.2.2/qa/484-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/484-33- do
pcp-5.2.2/qa/484:34: ls -l $file $2`echo $file | sed -e "s;$1;;"` >>$seq.full
pcp-5.2.2/qa/484-35- done
##############################################
pcp-5.2.2/qa/484-57- # strip any command line options preceding the archive basename
pcp-5.2.2/qa/484:58: arch=`echo $arch | sed -e 's/.* //'`
pcp-5.2.2/qa/484-59- _cmp $arch $tmp.new
##############################################
pcp-5.2.2/qa/485-7-
pcp-5.2.2/qa/485:8:seq=`basename $0`
pcp-5.2.2/qa/485-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/486-7-
pcp-5.2.2/qa/486:8:seq=`basename $0`
pcp-5.2.2/qa/486-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/486-144- echo "$spec" >$tmp.config
pcp-5.2.2/qa/486:145: echo "=== `cat $tmp.config` ===" | tee -a $seq.full
pcp-5.2.2/qa/486-146- rm -f $tmp.new.*
pcp-5.2.2/qa/486:147: arch=`echo "$arch_args" | sed -e 's/|.*//'`
pcp-5.2.2/qa/486:148: args=`echo "$arch_args" | sed -n -e '/|/s/.*|//p'`
pcp-5.2.2/qa/486-149- pmlogrewrite -w -c $tmp.config $args $arch $tmp.new 2>&1 | _filter
##############################################
pcp-5.2.2/qa/487-7-
pcp-5.2.2/qa/487:8:seq=`basename $0`
pcp-5.2.2/qa/487-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/487-71- echo "$spec" >$tmp.config
pcp-5.2.2/qa/487:72: echo "=== `cat $tmp.config` ===" | tee -a $seq.full
pcp-5.2.2/qa/487-73- rm -f $tmp.new.*
pcp-5.2.2/qa/487:74: pmlogrewrite -w -c $tmp.config `echo $arch_args | sed -e 's/|/ /g'` $tmp.new 2>&1 | _filter
pcp-5.2.2/qa/487-75- if [ -f $tmp.new.0 ]
pcp-5.2.2/qa/487-76- then
pcp-5.2.2/qa/487:77: _cmp `echo $arch_args | sed -e 's/|.*//'` $tmp.new
pcp-5.2.2/qa/487-78- fi
##############################################
pcp-5.2.2/qa/488-7-
pcp-5.2.2/qa/488:8:seq=`basename $0`
pcp-5.2.2/qa/488-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/488-54- echo "$spec" >$tmp.config
pcp-5.2.2/qa/488:55: echo "=== `cat $tmp.config` ===" | tee -a $seq.full
pcp-5.2.2/qa/488-56- rm -f $tmp.new.*
pcp-5.2.2/qa/488:57: pmlogrewrite -w -c $tmp.config `echo $arch_args | sed -e 's/|/ /g'` $tmp.new 2>&1 | _filter
pcp-5.2.2/qa/488-58- if [ -f $tmp.new.0 ]
pcp-5.2.2/qa/488-59- then
pcp-5.2.2/qa/488:60: _cmp `echo $arch_args | sed -e 's/|.*//'` $tmp.new
pcp-5.2.2/qa/488-61- fi
##############################################
pcp-5.2.2/qa/489-7-
pcp-5.2.2/qa/489:8:seq=`basename $0`
pcp-5.2.2/qa/489-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/490-7-
pcp-5.2.2/qa/490:8:seq=`basename $0`
pcp-5.2.2/qa/490-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/491-12-
pcp-5.2.2/qa/491:13:seq=`basename $0`
pcp-5.2.2/qa/491-14-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/492-7-
pcp-5.2.2/qa/492:8:seq=`basename $0`
pcp-5.2.2/qa/492-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/492-87-echo "input records: `_cnt_logrecs archives/ok-truncbin`"
pcp-5.2.2/qa/492:88:echo "output records: `_cnt_logrecs $tmp.new`"
pcp-5.2.2/qa/492-89-
##############################################
pcp-5.2.2/qa/492-94-echo "input records: `_cnt_logrecs archives/ok-truncbin`"
pcp-5.2.2/qa/492:95:echo "output records: `_cnt_logrecs $tmp.new`"
pcp-5.2.2/qa/492-96-
##############################################
pcp-5.2.2/qa/492-101-echo "input records: `_cnt_logrecs badarchives/badlen-8`"
pcp-5.2.2/qa/492:102:echo "output records: `_cnt_logrecs $tmp.new`"
pcp-5.2.2/qa/492-103-
##############################################
pcp-5.2.2/qa/492-108-echo "input records: `_cnt_logrecs badarchives/badlen-9`"
pcp-5.2.2/qa/492:109:echo "output records: `_cnt_logrecs $tmp.new`"
pcp-5.2.2/qa/492-110-
##############################################
pcp-5.2.2/qa/492-115-echo "input records: `_cnt_logrecs badarchives/err_v1`"
pcp-5.2.2/qa/492:116:echo "output records: `_cnt_logrecs $tmp.new`"
pcp-5.2.2/qa/492-117-
##############################################
pcp-5.2.2/qa/493-7-
pcp-5.2.2/qa/493:8:seq=`basename $0`
pcp-5.2.2/qa/493-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/494-7-
pcp-5.2.2/qa/494:8:seq=`basename $0`
pcp-5.2.2/qa/494-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/494-83- echo "$spec" >$tmp.config
pcp-5.2.2/qa/494:84: echo "=== `cat $tmp.config` ===" | tee -a $seq.full
pcp-5.2.2/qa/494-85- rm -f $tmp.new.*
pcp-5.2.2/qa/494:86: pmlogrewrite -ws -c $tmp.config `echo $arch_args | sed -e 's/|/ /g'` $tmp.new 2>&1 | _filter
pcp-5.2.2/qa/494:87: _cmp `echo $arch_args | sed -e 's/|.*//'` $tmp.new
pcp-5.2.2/qa/494-88-done
##############################################
pcp-5.2.2/qa/494-96- echo | tee -a $seq.full
pcp-5.2.2/qa/494:97: metrics=`echo "$spec" | sed -e 's/.*|//'`
pcp-5.2.2/qa/494:98: spec=`echo "$spec" | sed -e 's/|.*//'`
pcp-5.2.2/qa/494-99- echo "$spec" >$tmp.config
pcp-5.2.2/qa/494:100: echo "=== `cat $tmp.config` ===" | tee -a $seq.full
pcp-5.2.2/qa/494-101- rm -f $tmp.new.*
pcp-5.2.2/qa/494:102: pmlogrewrite -ws -c $tmp.config `echo $arch_args | sed -e 's/|/ /g'` $tmp.new 2>&1 | _filter
pcp-5.2.2/qa/494-103- for m in $metrics
pcp-5.2.2/qa/494-104- do
pcp-5.2.2/qa/494:105: _cmp2 `echo $arch_args | sed -e 's/|.*//'` $tmp.new $m
pcp-5.2.2/qa/494-106- done
##############################################
pcp-5.2.2/qa/495-7-
pcp-5.2.2/qa/495:8:seq=`basename $0`
pcp-5.2.2/qa/495-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/495-71- echo "$spec" >$tmp.config
pcp-5.2.2/qa/495:72: echo "=== `cat $tmp.config` ===" | tee -a $seq.full
pcp-5.2.2/qa/495-73- rm -f $tmp.new.*
pcp-5.2.2/qa/495:74: pmlogrewrite -ws -c $tmp.config `echo $arch_args | sed -e 's/|/ /g'` $tmp.new 2>&1 | _filter
pcp-5.2.2/qa/495:75: _cmp `echo $arch_args | sed -e 's/|.*//'` $tmp.new
pcp-5.2.2/qa/495-76-done
##############################################
pcp-5.2.2/qa/495-99- echo "$spec" >$tmp.config
pcp-5.2.2/qa/495:100: echo "=== `cat $tmp.config` ===" | tee -a $seq.full
pcp-5.2.2/qa/495-101- rm -f $tmp.new.*
pcp-5.2.2/qa/495:102: pmlogrewrite -ws -c $tmp.config `echo $arch_args | sed -e 's/|/ /g'` $tmp.new 2>&1 | _filter
pcp-5.2.2/qa/495:103: _cmp `echo $arch_args | sed -e 's/|.*//'` $tmp.new
pcp-5.2.2/qa/495-104-done
##############################################
pcp-5.2.2/qa/495-127- echo "$spec" >$tmp.config
pcp-5.2.2/qa/495:128: echo "=== `cat $tmp.config` ===" | tee -a $seq.full
pcp-5.2.2/qa/495-129- rm -f $tmp.new.*
pcp-5.2.2/qa/495:130: pmlogrewrite -ws -c $tmp.config `echo $arch_args | sed -e 's/|/ /g'` $tmp.new 2>&1 | _filter
pcp-5.2.2/qa/495:131: _cmp `echo $arch_args | sed -e 's/|.*//'` $tmp.new
pcp-5.2.2/qa/495-132-done
##############################################
pcp-5.2.2/qa/495-163- echo "$spec" >$tmp.config
pcp-5.2.2/qa/495:164: echo "=== `cat $tmp.config` ===" | tee -a $seq.full
pcp-5.2.2/qa/495-165- rm -f $tmp.new.*
pcp-5.2.2/qa/495:166: pmlogrewrite -ws -c $tmp.config `echo $arch_args | sed -e 's/|/ /g'` $tmp.new 2>&1 | _filter
pcp-5.2.2/qa/495:167: _cmp `echo $arch_args | sed -e 's/|.*//'` $tmp.new
pcp-5.2.2/qa/495-168-done
##############################################
pcp-5.2.2/qa/496-7-
pcp-5.2.2/qa/496:8:seq=`basename $0`
pcp-5.2.2/qa/496-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/497-8-
pcp-5.2.2/qa/497:9:seq=`basename $0`
pcp-5.2.2/qa/497-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/498-7-
pcp-5.2.2/qa/498:8:seq=`basename $0`
pcp-5.2.2/qa/498-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/498.out-76-[DATE] pmdaqueue(PID) Debug: Appending event: queue#0 "queue0" (24 bytes)
pcp-5.2.2/qa/498.out:77:[DATE] pmdaqueue(PID) Debug: Inserted queue0 event 0xADDR (24 bytes) clients = 1
pcp-5.2.2/qa/498.out-78-add event(queue0,24) -> 0 [TIME]
##############################################
pcp-5.2.2/qa/498.out-101-[DATE] pmdaqueue(PID) Debug: Appending event: queue#0 "queue0" (24 bytes)
pcp-5.2.2/qa/498.out:102:[DATE] pmdaqueue(PID) Debug: Inserted queue0 event 0xADDR (24 bytes) clients = 1
pcp-5.2.2/qa/498.out-103-add event(queue0,24) -> 0 [TIME]
pcp-5.2.2/qa/498.out-104-[DATE] pmdaqueue(PID) Debug: Appending event: queue#0 "queue0" (2 bytes)
pcp-5.2.2/qa/498.out:105:[DATE] pmdaqueue(PID) Debug: Inserted queue0 event 0xADDR (2 bytes) clients = 1
pcp-5.2.2/qa/498.out-106-add event(queue0,2) -> 0 [TIME]
pcp-5.2.2/qa/498.out-107-[DATE] pmdaqueue(PID) Debug: Appending event: queue#0 "queue0" (8 bytes)
pcp-5.2.2/qa/498.out:108:[DATE] pmdaqueue(PID) Debug: Inserted queue0 event 0xADDR (8 bytes) clients = 1
pcp-5.2.2/qa/498.out-109-add event(queue0,8) -> 0 [TIME]
##############################################
pcp-5.2.2/qa/498.out-123-[DATE] pmdaqueue(PID) Debug: Appending event: queue#0 "queue0" (28 bytes)
pcp-5.2.2/qa/498.out:124:[DATE] pmdaqueue(PID) Debug: Inserted queue0 event 0xADDR (28 bytes) clients = 1
pcp-5.2.2/qa/498.out-125-add event(queue0,28) -> 0 [TIME]
##############################################
pcp-5.2.2/qa/498.out-127-[DATE] pmdaqueue(PID) Debug: Dropping queue0: e=0xADDR sz=28 max=42 qsz=28
pcp-5.2.2/qa/498.out:128:[DATE] pmdaqueue(PID) Debug: Removing queue0 event 0xADDR (28 bytes)
pcp-5.2.2/qa/498.out:129:[DATE] pmdaqueue(PID) Debug: Inserted queue0 event 0xADDR (28 bytes) clients = 1
pcp-5.2.2/qa/498.out-130-add event(queue0,28) -> 0 [TIME]
##############################################
pcp-5.2.2/qa/498.out-149-[DATE] pmdaqueue(PID) Debug: Appending event: queue#0 "queue0" (24 bytes)
pcp-5.2.2/qa/498.out:150:[DATE] pmdaqueue(PID) Debug: Inserted queue0 event 0xADDR (24 bytes) clients = 1
pcp-5.2.2/qa/498.out-151-add event(queue0,24) -> 0 [TIME]
pcp-5.2.2/qa/498.out-152-[DATE] pmdaqueue(PID) Debug: Appending event: queue#0 "queue0" (2 bytes)
pcp-5.2.2/qa/498.out:153:[DATE] pmdaqueue(PID) Debug: Inserted queue0 event 0xADDR (2 bytes) clients = 1
pcp-5.2.2/qa/498.out-154-add event(queue0,2) -> 0 [TIME]
pcp-5.2.2/qa/498.out-155-[DATE] pmdaqueue(PID) Debug: Appending event: queue#0 "queue0" (8 bytes)
pcp-5.2.2/qa/498.out:156:[DATE] pmdaqueue(PID) Debug: Inserted queue0 event 0xADDR (8 bytes) clients = 1
pcp-5.2.2/qa/498.out-157-add event(queue0,8) -> 0 [TIME]
##############################################
pcp-5.2.2/qa/498.out-176-[DATE] pmdaqueue(PID) Debug: Appending event: queue#0 "queue0" (28 bytes)
pcp-5.2.2/qa/498.out:177:[DATE] pmdaqueue(PID) Debug: Inserted queue0 event 0xADDR (28 bytes) clients = 1
pcp-5.2.2/qa/498.out-178-add event(queue0,28) -> 0 [TIME]
##############################################
pcp-5.2.2/qa/498.out-180-[DATE] pmdaqueue(PID) Debug: Dropping queue0: e=0xADDR sz=28 max=42 qsz=28
pcp-5.2.2/qa/498.out:181:[DATE] pmdaqueue(PID) Debug: Removing queue0 event 0xADDR (28 bytes)
pcp-5.2.2/qa/498.out:182:[DATE] pmdaqueue(PID) Debug: Inserted queue0 event 0xADDR (28 bytes) clients = 1
pcp-5.2.2/qa/498.out-183-add event(queue0,28) -> 0 [TIME]
##############################################
pcp-5.2.2/qa/498.out-215-[DATE] pmdaqueue(PID) Debug: Appending event: queue#0 "queue0" (128 bytes)
pcp-5.2.2/qa/498.out:216:[DATE] pmdaqueue(PID) Debug: Inserted queue0 event 0xADDR (128 bytes) clients = 1
pcp-5.2.2/qa/498.out-217-add event(queue0,128) -> 0 [TIME]
pcp-5.2.2/qa/498.out-218-[DATE] pmdaqueue(PID) Debug: Appending event: queue#1 "queue1" (24 bytes)
pcp-5.2.2/qa/498.out:219:[DATE] pmdaqueue(PID) Debug: Inserted queue1 event 0xADDR (24 bytes) clients = 2
pcp-5.2.2/qa/498.out-220-add event(queue1,24) -> 0 [TIME]
pcp-5.2.2/qa/498.out-221-[DATE] pmdaqueue(PID) Debug: Appending event: queue#0 "queue0" (18 bytes)
pcp-5.2.2/qa/498.out:222:[DATE] pmdaqueue(PID) Debug: Inserted queue0 event 0xADDR (18 bytes) clients = 1
pcp-5.2.2/qa/498.out-223-add event(queue0,18) -> 0 [TIME]
pcp-5.2.2/qa/498.out-224-[DATE] pmdaqueue(PID) Debug: Appending event: queue#1 "queue1" (228 bytes)
pcp-5.2.2/qa/498.out:225:[DATE] pmdaqueue(PID) Debug: Inserted queue1 event 0xADDR (228 bytes) clients = 2
pcp-5.2.2/qa/498.out-226-add event(queue1,228) -> 0 [TIME]
pcp-5.2.2/qa/498.out-227-[DATE] pmdaqueue(PID) Debug: Appending event: queue#0 "queue0" (142 bytes)
pcp-5.2.2/qa/498.out:228:[DATE] pmdaqueue(PID) Debug: Inserted queue0 event 0xADDR (142 bytes) clients = 1
pcp-5.2.2/qa/498.out-229-add event(queue0,142) -> 0 [TIME]
pcp-5.2.2/qa/498.out-230-[DATE] pmdaqueue(PID) Debug: Appending event: queue#1 "queue1" (28 bytes)
pcp-5.2.2/qa/498.out:231:[DATE] pmdaqueue(PID) Debug: Inserted queue1 event 0xADDR (28 bytes) clients = 2
pcp-5.2.2/qa/498.out-232-add event(queue1,28) -> 0 [TIME]
##############################################
pcp-5.2.2/qa/498.out-264-[DATE] pmdaqueue(PID) Debug: Appending event: queue#2 "queue2" (328 bytes)
pcp-5.2.2/qa/498.out:265:[DATE] pmdaqueue(PID) Debug: Inserted queue2 event 0xADDR (328 bytes) clients = 1
pcp-5.2.2/qa/498.out-266-add event(queue2,328) -> 0 [TIME]
##############################################
pcp-5.2.2/qa/498.out-268-[DATE] pmdaqueue(PID) Debug: Dropping queue2: e=0xADDR sz=328 max=356 qsz=328
pcp-5.2.2/qa/498.out:269:[DATE] pmdaqueue(PID) Debug: Removing queue2 event 0xADDR (328 bytes)
pcp-5.2.2/qa/498.out:270:[DATE] pmdaqueue(PID) Debug: Inserted queue2 event 0xADDR (32 bytes) clients = 1
pcp-5.2.2/qa/498.out-271-add event(queue2,32) -> 0 [TIME]
##############################################
pcp-5.2.2/qa/498.out-274-[DATE] pmdaqueue(PID) Debug: Appending event: queue#1 "queue1" (227 bytes)
pcp-5.2.2/qa/498.out:275:[DATE] pmdaqueue(PID) Debug: Inserted queue1 event 0xADDR (227 bytes) clients = 2
pcp-5.2.2/qa/498.out-276-add event(queue1,227) -> 0 [TIME]
##############################################
pcp-5.2.2/qa/498.out-319-[DATE] pmdaqueue(PID) Debug: Appending event: queue#0 "queue0" (128 bytes)
pcp-5.2.2/qa/498.out:320:[DATE] pmdaqueue(PID) Debug: Inserted queue0 event 0xADDR (128 bytes) clients = 1
pcp-5.2.2/qa/498.out-321-add event(queue0,128) -> 0 [TIME]
pcp-5.2.2/qa/498.out-322-[DATE] pmdaqueue(PID) Debug: Appending event: queue#1 "queue1" (24 bytes)
pcp-5.2.2/qa/498.out:323:[DATE] pmdaqueue(PID) Debug: Inserted queue1 event 0xADDR (24 bytes) clients = 2
pcp-5.2.2/qa/498.out-324-add event(queue1,24) -> 0 [TIME]
pcp-5.2.2/qa/498.out-325-[DATE] pmdaqueue(PID) Debug: Appending event: queue#0 "queue0" (18 bytes)
pcp-5.2.2/qa/498.out:326:[DATE] pmdaqueue(PID) Debug: Inserted queue0 event 0xADDR (18 bytes) clients = 1
pcp-5.2.2/qa/498.out-327-add event(queue0,18) -> 0 [TIME]
pcp-5.2.2/qa/498.out-328-[DATE] pmdaqueue(PID) Debug: Appending event: queue#1 "queue1" (228 bytes)
pcp-5.2.2/qa/498.out:329:[DATE] pmdaqueue(PID) Debug: Inserted queue1 event 0xADDR (228 bytes) clients = 2
pcp-5.2.2/qa/498.out-330-add event(queue1,228) -> 0 [TIME]
pcp-5.2.2/qa/498.out-331-[DATE] pmdaqueue(PID) Debug: Appending event: queue#0 "queue0" (142 bytes)
pcp-5.2.2/qa/498.out:332:[DATE] pmdaqueue(PID) Debug: Inserted queue0 event 0xADDR (142 bytes) clients = 1
pcp-5.2.2/qa/498.out-333-add event(queue0,142) -> 0 [TIME]
pcp-5.2.2/qa/498.out-334-[DATE] pmdaqueue(PID) Debug: Appending event: queue#1 "queue1" (28 bytes)
pcp-5.2.2/qa/498.out:335:[DATE] pmdaqueue(PID) Debug: Inserted queue1 event 0xADDR (28 bytes) clients = 2
pcp-5.2.2/qa/498.out-336-add event(queue1,28) -> 0 [TIME]
pcp-5.2.2/qa/498.out-337-[DATE] pmdaqueue(PID) Debug: Dropping queue0: e=0xADDR sz=128 max=1024 qsz=288
pcp-5.2.2/qa/498.out:338:[DATE] pmdaqueue(PID) Debug: Removing queue0 event 0xADDR (128 bytes)
pcp-5.2.2/qa/498.out-339-[DATE] pmdaqueue(PID) Debug: Dropping queue0: e=0xADDR sz=18 max=1024 qsz=160
pcp-5.2.2/qa/498.out:340:[DATE] pmdaqueue(PID) Debug: Removing queue0 event 0xADDR (18 bytes)
pcp-5.2.2/qa/498.out-341-[DATE] pmdaqueue(PID) Debug: Dropping queue0: e=0xADDR sz=142 max=1024 qsz=142
pcp-5.2.2/qa/498.out:342:[DATE] pmdaqueue(PID) Debug: Removing queue0 event 0xADDR (142 bytes)
pcp-5.2.2/qa/498.out-343-[DATE] pmdaqueue(PID) Debug: Dropping queue1: e=0xADDR sz=24 max=512 qsz=280
pcp-5.2.2/qa/498.out:344:[DATE] pmdaqueue(PID) Debug: Removing queue1 event 0xADDR (24 bytes)
pcp-5.2.2/qa/498.out-345-[DATE] pmdaqueue(PID) Debug: Dropping queue1: e=0xADDR sz=228 max=512 qsz=256
pcp-5.2.2/qa/498.out:346:[DATE] pmdaqueue(PID) Debug: Removing queue1 event 0xADDR (228 bytes)
pcp-5.2.2/qa/498.out-347-[DATE] pmdaqueue(PID) Debug: Dropping queue1: e=0xADDR sz=28 max=512 qsz=28
pcp-5.2.2/qa/498.out:348:[DATE] pmdaqueue(PID) Debug: Removing queue1 event 0xADDR (28 bytes)
pcp-5.2.2/qa/498.out-349-new queue(queue2,356) -> 2
##############################################
pcp-5.2.2/qa/498.out-366-[DATE] pmdaqueue(PID) Debug: Appending event: queue#2 "queue2" (328 bytes)
pcp-5.2.2/qa/498.out:367:[DATE] pmdaqueue(PID) Debug: Inserted queue2 event 0xADDR (328 bytes) clients = 1
pcp-5.2.2/qa/498.out-368-add event(queue2,328) -> 0 [TIME]
##############################################
pcp-5.2.2/qa/498.out-370-[DATE] pmdaqueue(PID) Debug: Dropping queue2: e=0xADDR sz=328 max=356 qsz=328
pcp-5.2.2/qa/498.out:371:[DATE] pmdaqueue(PID) Debug: Removing queue2 event 0xADDR (328 bytes)
pcp-5.2.2/qa/498.out:372:[DATE] pmdaqueue(PID) Debug: Inserted queue2 event 0xADDR (32 bytes) clients = 1
pcp-5.2.2/qa/498.out-373-add event(queue2,32) -> 0 [TIME]
##############################################
pcp-5.2.2/qa/498.out-376-[DATE] pmdaqueue(PID) Debug: Appending event: queue#1 "queue1" (227 bytes)
pcp-5.2.2/qa/498.out:377:[DATE] pmdaqueue(PID) Debug: Inserted queue1 event 0xADDR (227 bytes) clients = 2
pcp-5.2.2/qa/498.out-378-add event(queue1,227) -> 0 [TIME]
##############################################
pcp-5.2.2/qa/499-7-
pcp-5.2.2/qa/499:8:seq=`basename $0`
pcp-5.2.2/qa/499-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/499-62-End-of-File
pcp-5.2.2/qa/499:63:i=`expr $i + 1`
pcp-5.2.2/qa/499-64-rm -f $tmp.new.*
##############################################
pcp-5.2.2/qa/499-74-End-of-File
pcp-5.2.2/qa/499:75:i=`expr $i + 1`
pcp-5.2.2/qa/499-76-rm -f $tmp.new.*
##############################################
pcp-5.2.2/qa/499-86-End-of-File
pcp-5.2.2/qa/499:87:i=`expr $i + 1`
pcp-5.2.2/qa/499-88-rm -f $tmp.new.*
##############################################
pcp-5.2.2/qa/499-98-End-of-File
pcp-5.2.2/qa/499:99:i=`expr $i + 1`
pcp-5.2.2/qa/499-100-rm -f $tmp.new.*
##############################################
pcp-5.2.2/qa/499-110-End-of-File
pcp-5.2.2/qa/499:111:i=`expr $i + 1`
pcp-5.2.2/qa/499-112-rm -f $tmp.new.*
##############################################
pcp-5.2.2/qa/499-122-End-of-File
pcp-5.2.2/qa/499:123:i=`expr $i + 1`
pcp-5.2.2/qa/499-124-rm -f $tmp.new.*
##############################################
pcp-5.2.2/qa/499-142-End-of-File
pcp-5.2.2/qa/499:143:i=`expr $i + 1`
pcp-5.2.2/qa/499-144-rm -f $tmp.new.*
##############################################
pcp-5.2.2/qa/499-161-End-of-File
pcp-5.2.2/qa/499:162:i=`expr $i + 1`
pcp-5.2.2/qa/499-163-rm -f $tmp.new.*
##############################################
pcp-5.2.2/qa/499-173-End-of-File
pcp-5.2.2/qa/499:174:i=`expr $i + 1`
pcp-5.2.2/qa/499-175-rm -f $tmp.new.*
##############################################
pcp-5.2.2/qa/500-7-
pcp-5.2.2/qa/500:8:seq=`basename $0`
pcp-5.2.2/qa/500-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/501-8-
pcp-5.2.2/qa/501:9:seq=`basename $0`
pcp-5.2.2/qa/501-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/502-7-
pcp-5.2.2/qa/502:8:seq=`basename $0`
pcp-5.2.2/qa/502-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/503-7-
pcp-5.2.2/qa/503:8:seq=`basename $0`
pcp-5.2.2/qa/503-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/503-41- -e '/^-rw-r--r--/s/-rw-r--r--.* 2011/-rw-r--r-- ... 2011/' \
pcp-5.2.2/qa/503:42: -e `echo $PCP_LOG_DIR | sed -e 's/\//\\\\\//g'`'\/NOTICES/d'
pcp-5.2.2/qa/503-43-}
##############################################
pcp-5.2.2/qa/504-7-
pcp-5.2.2/qa/504:8:seq=`basename $0`
pcp-5.2.2/qa/504-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/505-7-
pcp-5.2.2/qa/505:8:seq=`basename $0`
pcp-5.2.2/qa/505-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/505-50-echo "metric sample.seconds { type -> U64 }" >$tmp.config
pcp-5.2.2/qa/505:51:echo "=== `cat $tmp.config` ===" | tee -a $seq.full
pcp-5.2.2/qa/505-52-rm -f $tmp.new.*
pcp-5.2.2/qa/505-53-pmlogrewrite -ws -c $tmp.config archives/ok-mv-foo $tmp.new 2>&1 | _filter
pcp-5.2.2/qa/505:54:echo "Output archive contains: `ls $tmp.new.* | tee -a $seq.full | wc -l | sed -e 's/ //g'` files"
pcp-5.2.2/qa/505-55-_cmp $tmp.new
##############################################
pcp-5.2.2/qa/505-58-echo "metric sample.seconds { type -> U64 }" >$tmp.config
pcp-5.2.2/qa/505:59:echo "=== -i `cat $tmp.config` ===" | tee -a $seq.full
pcp-5.2.2/qa/505-60-rm -f $tmp.new.*
##############################################
pcp-5.2.2/qa/505-65-pmlogrewrite -iws -c $tmp.config $tmp.new 2>&1 | _filter
pcp-5.2.2/qa/505:66:echo "Output archive contains: `ls $tmp.new.* | tee -a $seq.full | wc -l | sed -e 's/ //g'` files"
pcp-5.2.2/qa/505-67-_cmp $tmp.new
##############################################
pcp-5.2.2/qa/506-8-
pcp-5.2.2/qa/506:9:seq=`basename $0`
pcp-5.2.2/qa/506-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/506-19-./tmparch/mkbig1 > $seq.full 2>&1
pcp-5.2.2/qa/506:20:[ $? -eq 0 ] || _notrun `cat $seq.full`
pcp-5.2.2/qa/506-21-
##############################################
pcp-5.2.2/qa/506-41- limit=2147483648
pcp-5.2.2/qa/506:42: nvol=`ls $1.? | wc -l | sed -e 's/ //g'`
pcp-5.2.2/qa/506-43- if [ $nvol -ne 3 ]
##############################################
pcp-5.2.2/qa/506-51- do
pcp-5.2.2/qa/506:52: size=`_filesize $vol`
pcp-5.2.2/qa/506-53- if [ -z "$size" ]
##############################################
pcp-5.2.2/qa/506-90-do
pcp-5.2.2/qa/506:91: cp $file `echo $file | sed -e 's/big1/big2/'`
pcp-5.2.2/qa/506-92-done
##############################################
pcp-5.2.2/qa/507-8-
pcp-5.2.2/qa/507:9:seq=`basename $0`
pcp-5.2.2/qa/507-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/507-34- echo "ans -> $ans" >>$seq.full
pcp-5.2.2/qa/507:35: echo "nslookup $ans -> `nslookup $ans </dev/null 2>&1`" >>$seq.full
pcp-5.2.2/qa/507:36: echo "host $ans -> `host $ans 2>&1`" >>$seq.full
pcp-5.2.2/qa/507-37-fi
##############################################
pcp-5.2.2/qa/507-136- fi
pcp-5.2.2/qa/507:137: itns=`expr $itns - 1`
pcp-5.2.2/qa/507-138-done
##############################################
pcp-5.2.2/qa/508-8-
pcp-5.2.2/qa/508:9:seq=`basename $0`
pcp-5.2.2/qa/508-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/509-8-
pcp-5.2.2/qa/509:9:seq=`basename $0`
pcp-5.2.2/qa/509-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/510-9-
pcp-5.2.2/qa/510:10:seq=`basename $0`
pcp-5.2.2/qa/510-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/511-11-
pcp-5.2.2/qa/511:12:seq=`basename $0`
pcp-5.2.2/qa/511-13-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/512-7-
pcp-5.2.2/qa/512:8:seq=`basename $0`
pcp-5.2.2/qa/512-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/513-4-
pcp-5.2.2/qa/513:5:seq=`basename $0`
pcp-5.2.2/qa/513-6-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/514-9-
pcp-5.2.2/qa/514:10:seq=`basename $0`
pcp-5.2.2/qa/514-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/514-220-fi
pcp-5.2.2/qa/514:221:echo "`wc -l <$tmp.syslog | sed -e 's/ //g'` lines ... expect 200" >>$seq.full
pcp-5.2.2/qa/514-222-cat $tmp.syslog >>$seq.full
##############################################
pcp-5.2.2/qa/515-10-
pcp-5.2.2/qa/515:11:seq=`basename $0`
pcp-5.2.2/qa/515-12-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/516-7-
pcp-5.2.2/qa/516:8:seq=`basename $0`
pcp-5.2.2/qa/516-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/517-8-
pcp-5.2.2/qa/517:9:seq=`basename $0`
pcp-5.2.2/qa/517-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/517-73- #
pcp-5.2.2/qa/517:74: _try=`find "$_dir/$_file" -newer "$_new/$_file" -print`
pcp-5.2.2/qa/517-75- [ -n "$_try" ] && _want=true
##############################################
pcp-5.2.2/qa/517-80- then
pcp-5.2.2/qa/517:81: _dest=`dirname $_new/$_file`
pcp-5.2.2/qa/517-82- if [ ! -d "$_dest" ]
##############################################
pcp-5.2.2/qa/518-7-
pcp-5.2.2/qa/518:8:seq=`basename $0`
pcp-5.2.2/qa/518-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/518-80-"'$debug'" == "true" { print "state=" state " want=" want ": " $0 }
pcp-5.2.2/qa/518:81:state==1 && /'`echo $tmp.pmie | sed -e s@/@\\\\\\\\/@g`' \(2 rule\)/ { print; want = 1; next }
pcp-5.2.2/qa/518-82-state==1 && / \(actions=/ { if ($3 == $5 && $5 == $9) {
##############################################
pcp-5.2.2/qa/519-17-
pcp-5.2.2/qa/519:18:seq=`basename $0`
pcp-5.2.2/qa/519-19-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/519-101-#
pcp-5.2.2/qa/519:102:o1=`echo $other1 | sed -e 's/\..*//'`
pcp-5.2.2/qa/519:103:o2=`echo $other2 | sed -e 's/\..*//'`
pcp-5.2.2/qa/519-104-echo "pmie output ..."
##############################################
pcp-5.2.2/qa/519-164-fi
pcp-5.2.2/qa/519:165:echo "`wc -l <$tmp.syslog | sed -e 's/ //g'` lines ... expect 200" >>$seq.full
pcp-5.2.2/qa/519-166-cat $tmp.syslog >>$seq.full
##############################################
pcp-5.2.2/qa/520-9-
pcp-5.2.2/qa/520:10:seq=`basename $0`
pcp-5.2.2/qa/520-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/521-7-
pcp-5.2.2/qa/521:8:seq=`basename $0`
pcp-5.2.2/qa/521-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/522-7-
pcp-5.2.2/qa/522:8:seq=`basename $0`
pcp-5.2.2/qa/522-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/522-38- st=$?
pcp-5.2.2/qa/522:39: cnt=`expr $cnt + 1`;
pcp-5.2.2/qa/522-40- if [ $cnt -gt 12 ] ; then
##############################################
pcp-5.2.2/qa/523-12-
pcp-5.2.2/qa/523:13:seq=`basename $0`
pcp-5.2.2/qa/523-14-
##############################################
pcp-5.2.2/qa/524-8-
pcp-5.2.2/qa/524:9:seq=`basename $0`
pcp-5.2.2/qa/524-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/525-10-
pcp-5.2.2/qa/525:11:seq=`basename $0`
pcp-5.2.2/qa/525-12-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/526-7-
pcp-5.2.2/qa/526:8:seq=`basename $0`
pcp-5.2.2/qa/526-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/527-9-
pcp-5.2.2/qa/527:10:seq=`basename $0`
pcp-5.2.2/qa/527-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/528-7-
pcp-5.2.2/qa/528:8:seq=`basename $0`
pcp-5.2.2/qa/528-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/529-7-
pcp-5.2.2/qa/529:8:seq=`basename $0`
pcp-5.2.2/qa/529-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/529-81- $sudo -u $__user sh $tmp.cmd1 $@ $tmp.conf >$tmp.pid
pcp-5.2.2/qa/529:82: eval `cat $tmp.pid`
pcp-5.2.2/qa/529-83-}
##############################################
pcp-5.2.2/qa/529-93- $sudo -u $__user sh $tmp.cmd2 $@ >$tmp.pid
pcp-5.2.2/qa/529:94: eval `cat $tmp.pid`
pcp-5.2.2/qa/529-95-}
##############################################
pcp-5.2.2/qa/530-12-
pcp-5.2.2/qa/530:13:seq=`basename $0`
pcp-5.2.2/qa/530-14-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/530-98- now_min=`pmdate %M`
pcp-5.2.2/qa/530:99: min2=`expr 2 - $now_min`
pcp-5.2.2/qa/530-100- [ "$min2" -ge 0 ] && min2="+$min2"
pcp-5.2.2/qa/530:101: min4=`expr 4 - $now_min`
pcp-5.2.2/qa/530-102- [ "$min4" -ge 0 ] && min4="+$min4"
pcp-5.2.2/qa/530:103: namea=`pmdate -${day}d ${hour}H ${min2}M $fmt.%H.%M`
pcp-5.2.2/qa/530:104: nameb=`pmdate -${day}d ${hour}H ${min4}M $fmt.%H.%M`
pcp-5.2.2/qa/530:105: yesterday=`pmdate -1d ${hour}H ${min2}M $fmt`
pcp-5.2.2/qa/530:106: stampa=`echo $namea | sed -e 's/\.//g'`
pcp-5.2.2/qa/530:107: stampb=`echo $nameb | sed -e 's/\.//g'`
pcp-5.2.2/qa/530-108- echo "s/$namea/NOW-$day.00.02/g" >>$tmp.sed
##############################################
pcp-5.2.2/qa/531-7-
pcp-5.2.2/qa/531:8:seq=`basename $0`
pcp-5.2.2/qa/531-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/532-11-
pcp-5.2.2/qa/532:12:seq=`basename $0`
pcp-5.2.2/qa/532-13-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/532-65- now_hr=`pmdate %H`
pcp-5.2.2/qa/532:66: hr_set=`expr $hour - $now_hr`
pcp-5.2.2/qa/532-67- [ "$hr_set" -ge 0 ] && hr_set="+$hr_set"
pcp-5.2.2/qa/532-68- now_min=`pmdate %M`
pcp-5.2.2/qa/532:69: min_set10=`expr 10 - $now_min`
pcp-5.2.2/qa/532-70- [ "$min_set10" -ge 0 ] && min_set10="+$min_set10"
pcp-5.2.2/qa/532:71: min_set20=`expr 20 - $now_min`
pcp-5.2.2/qa/532-72- [ "$min_set20" -ge 0 ] && min_set20="+$min_set20"
pcp-5.2.2/qa/532:73: min_set30=`expr 30 - $now_min`
pcp-5.2.2/qa/532-74- [ "$min_set30" -ge 0 ] && min_set30="+$min_set30"
pcp-5.2.2/qa/532:75: namea=`pmdate -${day}d ${hr_set}H ${min_set10}M $fmt.%H.%M`
pcp-5.2.2/qa/532:76: nameb=`pmdate -${day}d ${hr_set}H ${min_set20}M $fmt.%H.%M`
pcp-5.2.2/qa/532:77: namec=`pmdate -${day}d ${hr_set}H ${min_set30}M $fmt.%H.%M`
pcp-5.2.2/qa/532:78: yesterday=`pmdate -1d ${hr_set}H ${min_set10}M $fmt`
pcp-5.2.2/qa/532:79: stampa=`echo $namea | sed -e 's/\.//g'`
pcp-5.2.2/qa/532:80: stampb=`echo $nameb | sed -e 's/\.//g'`
pcp-5.2.2/qa/532:81: stampc=`echo $namec | sed -e 's/\.//g'`
pcp-5.2.2/qa/532-82- nameb=${namea}-00
##############################################
pcp-5.2.2/qa/533-7-
pcp-5.2.2/qa/533:8:seq=`basename $0`
pcp-5.2.2/qa/533-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/534-7-
pcp-5.2.2/qa/534:8:seq=`basename $0`
pcp-5.2.2/qa/534-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/535-7-
pcp-5.2.2/qa/535:8:seq=`basename $0`
pcp-5.2.2/qa/535-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/536-7-
pcp-5.2.2/qa/536:8:seq=`basename $0`
pcp-5.2.2/qa/536-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/537-7-
pcp-5.2.2/qa/537:8:seq=`basename $0`
pcp-5.2.2/qa/537-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/538-7-
pcp-5.2.2/qa/538:8:seq=`basename $0`
pcp-5.2.2/qa/538-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/539-8-
pcp-5.2.2/qa/539:9:seq=`basename $0`
pcp-5.2.2/qa/539-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/540-8-
pcp-5.2.2/qa/540:9:seq=`basename $0`
pcp-5.2.2/qa/540-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/541-11-
pcp-5.2.2/qa/541:12:seq=`basename $0`
pcp-5.2.2/qa/541-13-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/542-7-
pcp-5.2.2/qa/542:8:seq=`basename $0`
pcp-5.2.2/qa/542-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/542-27- # try 3 times to avoid clock changes between the date(1) and pmdate(1)
pcp-5.2.2/qa/542:28: # executions
pcp-5.2.2/qa/542-29- #
##############################################
pcp-5.2.2/qa/542-58- -e 's/\([ 1-3][0-9]\) \([A-Z][a-z][a-z]\)/\2 \1/'`
pcp-5.2.2/qa/542:59: x2=`pmdate "$fmt"`
pcp-5.2.2/qa/542-60- if [ "$x1" = "$x2" ]
##############################################
pcp-5.2.2/qa/542-64- else
pcp-5.2.2/qa/542:65: echo "date -> \"`date +"$fmt"`\" -> \"$x1\"" >>$tmp.err
pcp-5.2.2/qa/542-66- echo "pmdate -> \"$x2\"" >>$tmp.err
##############################################
pcp-5.2.2/qa/543-10-
pcp-5.2.2/qa/543:11:seq=`basename $0`
pcp-5.2.2/qa/543-12-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/543-33-MAIL=/var/mail/pcpqa
pcp-5.2.2/qa/543:34:HOME=`$PCP_AWK_PROG -F: '/^pcpqa/ { print $6 }' /etc/passwd`
pcp-5.2.2/qa/543-35-FORWARD="$HOME/.forward"
##############################################
pcp-5.2.2/qa/544-7-
pcp-5.2.2/qa/544:8:seq=`basename $0`
pcp-5.2.2/qa/544-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/544-175- echo "=== General metrics ==="
pcp-5.2.2/qa/544:176: pminfo -f -a $TA `cat $tmp.general` | tee $tmp.out.general
pcp-5.2.2/qa/544-177- echo
pcp-5.2.2/qa/544-178- echo "=== CPU metrics ==="
pcp-5.2.2/qa/544:179: pminfo -f -a $TA `cat $tmp.cpus` | tee $tmp.out.cpus
pcp-5.2.2/qa/544-180- echo
pcp-5.2.2/qa/544-181- echo "=== Disk metrics ==="
pcp-5.2.2/qa/544:182: pminfo -f -a $TA `cat $tmp.disks` | tee $tmp.out.disks
pcp-5.2.2/qa/544-183- echo
pcp-5.2.2/qa/544-184- echo "=== Network metrics ==="
pcp-5.2.2/qa/544:185: pminfo -f -a $TA `cat $tmp.nets` | tee $tmp.out.nets
pcp-5.2.2/qa/544-186- echo
pcp-5.2.2/qa/544-187- echo "=== Process metrics ==="
pcp-5.2.2/qa/544:188: pminfo -f -a $TA `cat $tmp.procs` | tee $tmp.out.procs
pcp-5.2.2/qa/544-189-
##############################################
pcp-5.2.2/qa/544-259-
pcp-5.2.2/qa/544:260: __pcp=`cat $tmp.pcp`
pcp-5.2.2/qa/544-261- if [ -z "$__pcp" ]
##############################################
pcp-5.2.2/qa/544-264- else
pcp-5.2.2/qa/544:265: __collectl=`cat $tmp.collectl`
pcp-5.2.2/qa/544-266- if [ -z "$__collectl" ]
##############################################
pcp-5.2.2/qa/544-268- echo "$metric[$inst]: failed to extract scaled collectl value ($idx)"
pcp-5.2.2/qa/544:269: [ -s $tmp.tmp ] && echo "from ... `cat $tmp.tmp`"
pcp-5.2.2/qa/544-270- else
##############################################
pcp-5.2.2/qa/545-8-
pcp-5.2.2/qa/545:9:seq=`basename $0`
pcp-5.2.2/qa/545-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/546-9-
pcp-5.2.2/qa/546:10:seq=`basename $0`
pcp-5.2.2/qa/546-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/547-7-
pcp-5.2.2/qa/547:8:seq=`basename $0`
pcp-5.2.2/qa/547-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/548-7-
pcp-5.2.2/qa/548:8:seq=`basename $0`
pcp-5.2.2/qa/548-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/549-7-
pcp-5.2.2/qa/549:8:seq=`basename $0`
pcp-5.2.2/qa/549-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/550-7-
pcp-5.2.2/qa/550:8:seq=`basename $0`
pcp-5.2.2/qa/550-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/550-45- # allow for max 64KB increase (several pages on 64KB systems)
pcp-5.2.2/qa/550:46: MEMSLOP=`expr $MEMINIT + 640`
pcp-5.2.2/qa/550-47- echo "init=$MEMINIT used=$MEMUSED slop=$MEMSLOP" >> $here/$seq.full
##############################################
pcp-5.2.2/qa/551-7-
pcp-5.2.2/qa/551:8:seq=`basename $0`
pcp-5.2.2/qa/551-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/551-60- echo "[$n] check data matched" | tee -a $here/$seq.full
pcp-5.2.2/qa/551:61: n=`expr $n + 1`
pcp-5.2.2/qa/551-62- sleep 1
##############################################
pcp-5.2.2/qa/552-7-
pcp-5.2.2/qa/552:8:seq=`basename $0`
pcp-5.2.2/qa/552-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/553-7-
pcp-5.2.2/qa/553:8:seq=`basename $0`
pcp-5.2.2/qa/553-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/553-12-
pcp-5.2.2/qa/553:13:python_path=`which $python`
pcp-5.2.2/qa/553-14-pmda_path="$PCP_PMDAS_DIR/gluster"
##############################################
pcp-5.2.2/qa/554-7-
pcp-5.2.2/qa/554:8:seq=`basename $0`
pcp-5.2.2/qa/554-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/555-8-
pcp-5.2.2/qa/555:9:seq=`basename $0`
pcp-5.2.2/qa/555-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/556-7-
pcp-5.2.2/qa/556:8:seq=`basename $0`
pcp-5.2.2/qa/556-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/557-8-
pcp-5.2.2/qa/557:9:seq=`basename $0`
pcp-5.2.2/qa/557-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/558-8-
pcp-5.2.2/qa/558:9:seq=`basename $0`
pcp-5.2.2/qa/558-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/559-7-
pcp-5.2.2/qa/559:8:seq=`basename $0`
pcp-5.2.2/qa/559-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/560-7-
pcp-5.2.2/qa/560:8:seq=`basename $0`
pcp-5.2.2/qa/560-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/561-7-
pcp-5.2.2/qa/561:8:seq=`basename $0`
pcp-5.2.2/qa/561-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/561-22-{
pcp-5.2.2/qa/561:23: result=`$python $here/src/mergelabels.python "$@"`
pcp-5.2.2/qa/561-24-
##############################################
pcp-5.2.2/qa/561-37-{
pcp-5.2.2/qa/561:38: result=`$here/src/mergelabels "$@"`
pcp-5.2.2/qa/561-39-
##############################################
pcp-5.2.2/qa/562-7-
pcp-5.2.2/qa/562:8:seq=`basename $0`
pcp-5.2.2/qa/562-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/563-7-
pcp-5.2.2/qa/563:8:seq=`basename $0`
pcp-5.2.2/qa/563-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/564-7-
pcp-5.2.2/qa/564:8:seq=`basename $0`
pcp-5.2.2/qa/564-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/565-8-
pcp-5.2.2/qa/565:9:seq=`basename $0`
pcp-5.2.2/qa/565-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/566-8-
pcp-5.2.2/qa/566:9:seq=`basename $0`
pcp-5.2.2/qa/566-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/567-7-
pcp-5.2.2/qa/567:8:seq=`basename $0`
pcp-5.2.2/qa/567-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/568-7-
pcp-5.2.2/qa/568:8:seq=`basename $0`
pcp-5.2.2/qa/568-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/569-7-
pcp-5.2.2/qa/569:8:seq=`basename $0`
pcp-5.2.2/qa/569-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/570-7-
pcp-5.2.2/qa/570:8:seq=`basename $0`
pcp-5.2.2/qa/570-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/571-12-
pcp-5.2.2/qa/571:13:seq=`basename $0`
pcp-5.2.2/qa/571-14-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/572-9-
pcp-5.2.2/qa/572:10:seq=`basename $0`
pcp-5.2.2/qa/572-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/573-7-
pcp-5.2.2/qa/573:8:seq=`basename $0`
pcp-5.2.2/qa/573-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/574-8-
pcp-5.2.2/qa/574:9:seq=`basename $0`
pcp-5.2.2/qa/574-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/575-12-
pcp-5.2.2/qa/575:13:seq=`basename $0`
pcp-5.2.2/qa/575-14-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/575-40- pmie_was_running=true
pcp-5.2.2/qa/575:41: echo "Found pmie PID `cat $PCP_RUN_DIR/pmie.pid` running @ start" >>$here/$seq.full
pcp-5.2.2/qa/575-42- _stop_auto_restart pmie
##############################################
pcp-5.2.2/qa/576-7-
pcp-5.2.2/qa/576:8:seq=`basename $0`
pcp-5.2.2/qa/576-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/577-7-
pcp-5.2.2/qa/577:8:seq=`basename $0`
pcp-5.2.2/qa/577-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/578-12-
pcp-5.2.2/qa/578:13:seq=`basename $0`
pcp-5.2.2/qa/578-14-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/579-7-
pcp-5.2.2/qa/579:8:seq=`basename $0`
pcp-5.2.2/qa/579-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/580-7-
pcp-5.2.2/qa/580:8:seq=`basename $0`
pcp-5.2.2/qa/580-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/581-7-
pcp-5.2.2/qa/581:8:seq=`basename $0`
pcp-5.2.2/qa/581-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/582-7-
pcp-5.2.2/qa/582:8:seq=`basename $0`
pcp-5.2.2/qa/582-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/583-8-
pcp-5.2.2/qa/583:9:seq=`basename $0`
pcp-5.2.2/qa/583-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/583-149-#
pcp-5.2.2/qa/583:150:o1=`echo $other1 | sed -e 's/\..*//'`
pcp-5.2.2/qa/583:151:o2=`echo $other2 | sed -e 's/\..*//'`
pcp-5.2.2/qa/583-152-local=`hostname`
pcp-5.2.2/qa/583:153:l=`echo $local | sed -e 's/\..*//'`
pcp-5.2.2/qa/583-154-echo "o1=$o1" >>$here/$seq.full
##############################################
pcp-5.2.2/qa/584-7-
pcp-5.2.2/qa/584:8:seq=`basename $0`
pcp-5.2.2/qa/584-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/585-8-
pcp-5.2.2/qa/585:9:seq=`basename $0`
pcp-5.2.2/qa/585-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/586-10-
pcp-5.2.2/qa/586:11:seq=`basename $0`
pcp-5.2.2/qa/586-12-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/587-8-
pcp-5.2.2/qa/587:9:seq=`basename $0`
pcp-5.2.2/qa/587-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/588-7-
pcp-5.2.2/qa/588:8:seq=`basename $0`
pcp-5.2.2/qa/588-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/589-7-
pcp-5.2.2/qa/589:8:seq=`basename $0`
pcp-5.2.2/qa/589-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/589-15-
pcp-5.2.2/qa/589:16:host=`./getpmcdhosts -L -n 1 2>$tmp.tmp`
pcp-5.2.2/qa/589-17-if [ -z "$host" ]
pcp-5.2.2/qa/589-18-then
pcp-5.2.2/qa/589:19: _notrun "`cat $tmp.tmp`"
pcp-5.2.2/qa/589-20- # NOTREACHED
##############################################
pcp-5.2.2/qa/590-7-
pcp-5.2.2/qa/590:8:seq=`basename $0`
pcp-5.2.2/qa/590-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/591-7-
pcp-5.2.2/qa/591:8:seq=`basename $0`
pcp-5.2.2/qa/591-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/591-24-{
pcp-5.2.2/qa/591:25: tmpx=`echo $tmp`
pcp-5.2.2/qa/591-26- sed -e 's/^Archive:.* Host:/ARCHIVE: Host:/' \
##############################################
pcp-5.2.2/qa/592-7-
pcp-5.2.2/qa/592:8:seq=`basename $0`
pcp-5.2.2/qa/592-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/593-7-
pcp-5.2.2/qa/593:8:seq=`basename $0`
pcp-5.2.2/qa/593-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/594-7-
pcp-5.2.2/qa/594:8:seq=`basename $0`
pcp-5.2.2/qa/594-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/595-8-
pcp-5.2.2/qa/595:9:seq=`basename $0`
pcp-5.2.2/qa/595-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/596-7-
pcp-5.2.2/qa/596:8:seq=`basename $0`
pcp-5.2.2/qa/596-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/597-8-
pcp-5.2.2/qa/597:9:seq=`basename $0`
pcp-5.2.2/qa/597-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/598-7-
pcp-5.2.2/qa/598:8:seq=`basename $0`
pcp-5.2.2/qa/598-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/599-7-
pcp-5.2.2/qa/599:8:seq=`basename $0`
pcp-5.2.2/qa/599-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/600-44-
pcp-5.2.2/qa/600:45:seq=`basename $0`
pcp-5.2.2/qa/600-46-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/600-65- then
pcp-5.2.2/qa/600:66: pkg=`dpkg -S $lib | sed -e 's/: .*//' -e 1q`
pcp-5.2.2/qa/600-67- if [ -n "$pkg" ]
##############################################
pcp-5.2.2/qa/601-8-
pcp-5.2.2/qa/601:9:seq=`basename $0`
pcp-5.2.2/qa/601-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/602-7-
pcp-5.2.2/qa/602:8:seq=`basename $0`
pcp-5.2.2/qa/602-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/603-7-
pcp-5.2.2/qa/603:8:seq=`basename $0`
pcp-5.2.2/qa/603-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/603-62-qahost=`_get_fqdn`
pcp-5.2.2/qa/603:63:otherhost=`./getpmcdhosts -L -n 1 2>$tmp.out`
pcp-5.2.2/qa/603:64:[ -z "$otherhost" ] && _notrun `cat $tmp.out`
pcp-5.2.2/qa/603:65:qanet=`_host_to_ipaddr $otherhost | sed -e 's/[0-9][0-9]*$/*/'`
pcp-5.2.2/qa/603-66-
##############################################
pcp-5.2.2/qa/604-8-
pcp-5.2.2/qa/604:9:seq=`basename $0`
pcp-5.2.2/qa/604-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/605-7-
pcp-5.2.2/qa/605:8:seq=`basename $0`
pcp-5.2.2/qa/605-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/606-6-#
pcp-5.2.2/qa/606:7:seq=`basename $0`
pcp-5.2.2/qa/606-8-echo "QA output created by $seq"
pcp-5.2.2/qa/606-9-
pcp-5.2.2/qa/606:10:seq=`basename $0`
pcp-5.2.2/qa/606-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/607-7-
pcp-5.2.2/qa/607:8:seq=`basename $0`
pcp-5.2.2/qa/607-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/608-7-
pcp-5.2.2/qa/608:8:seq=`basename $0`
pcp-5.2.2/qa/608-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/609-7-
pcp-5.2.2/qa/609:8:seq=`basename $0`
pcp-5.2.2/qa/609-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/609-39- cat $tmp.countmark
pcp-5.2.2/qa/609:40: echo "pmdumplog: `wc -l <$tmp.pmdumplog | sed -e 's/ //g'` mark records"
pcp-5.2.2/qa/609:41: echo "countmark: `wc -l <$tmp.countmark | sed -e 's/ //g'` mark records"
pcp-5.2.2/qa/609-42-done
##############################################
pcp-5.2.2/qa/610-7-
pcp-5.2.2/qa/610:8:seq=`basename $0`
pcp-5.2.2/qa/610-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/610-26-# real QA test starts here
pcp-5.2.2/qa/610:27:MAX=`sed -n -e '/PM_MAXERRMSGLEN/s/.*PM_MAXERRMSGLEN[ ]*//p' <$PCP_INC_DIR/pmapi.h`
pcp-5.2.2/qa/610-28-if [ -z "$MAX" ]
##############################################
pcp-5.2.2/qa/611-7-
pcp-5.2.2/qa/611:8:seq=`basename $0`
pcp-5.2.2/qa/611-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/611-15-
pcp-5.2.2/qa/611:16:nval=`pmprobe proc.psinfo.pid | $PCP_AWK_PROG '{print $2}' 2>/dev/null`
pcp-5.2.2/qa/611-17-[ -z "$nval" -o "$nval" -le 0 ] && _notrun "No proc.psinfo metrics"
##############################################
pcp-5.2.2/qa/611-58- start|match)
pcp-5.2.2/qa/611:59: end=`expr $arg - 1`
pcp-5.2.2/qa/611-60- sed -n -e "$last,$end"p <$tmp.dump | sort >$tmp.this
pcp-5.2.2/qa/611:61: last=`expr $arg + 1`
pcp-5.2.2/qa/611-62- if [ "$key" = match ]
##############################################
pcp-5.2.2/qa/611-93- src/spawn 10000 >>$here/$seq.full 2>&1
pcp-5.2.2/qa/611:94: nrec=`pmdumplog $tmp | grep '^[0-9]' | wc -l | sed -e 's/ //g'`
pcp-5.2.2/qa/611-95- ls -l $tmp.0 >>$here/$seq.full
##############################################
pcp-5.2.2/qa/611-108- last_nrec=$nrec
pcp-5.2.2/qa/611:109: i=`expr $i + 1`
pcp-5.2.2/qa/611-110-done
##############################################
pcp-5.2.2/qa/612-7-
pcp-5.2.2/qa/612:8:seq=`basename $0`
pcp-5.2.2/qa/612-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/613-8-
pcp-5.2.2/qa/613:9:seq=`basename $0`
pcp-5.2.2/qa/613-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/614-9-
pcp-5.2.2/qa/614:10:seq=`basename $0`
pcp-5.2.2/qa/614-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/615-7-
pcp-5.2.2/qa/615:8:seq=`basename $0`
pcp-5.2.2/qa/615-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/616-7-
pcp-5.2.2/qa/616:8:seq=`basename $0`
pcp-5.2.2/qa/616-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/617-10-then
pcp-5.2.2/qa/617:11: seq=`basename $0`
pcp-5.2.2/qa/617-12- echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/617-14- # use $seq from caller, unless not set
pcp-5.2.2/qa/617:15: [ -n "$seq" ] || seq=`basename $0`
pcp-5.2.2/qa/617:16: echo "QA output created by `basename $0` $*"
pcp-5.2.2/qa/617-17-fi
##############################################
pcp-5.2.2/qa/618-7-
pcp-5.2.2/qa/618:8:seq=`basename $0`
pcp-5.2.2/qa/618-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/619-7-
pcp-5.2.2/qa/619:8:seq=`basename $0`
pcp-5.2.2/qa/619-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/620-7-
pcp-5.2.2/qa/620:8:seq=`basename $0`
pcp-5.2.2/qa/620-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/621-7-
pcp-5.2.2/qa/621:8:seq=`basename $0`
pcp-5.2.2/qa/621-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/622-13-
pcp-5.2.2/qa/622:14:seq=`basename $0`
pcp-5.2.2/qa/622-15-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/622-59-mkPMIEConfig
pcp-5.2.2/qa/622:60:pcpqa_hyphen_host_no_domain=`echo "$PCPQA_HYPHEN_HOST" | sed -e 's/\..*//'`
pcp-5.2.2/qa/622-61-pmie -D APPL0 -C -c $tmp.rule 2>&1 \
##############################################
pcp-5.2.2/qa/623-7-
pcp-5.2.2/qa/623:8:seq=`basename $0`
pcp-5.2.2/qa/623-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/623-57- touch -t ${DATE}0102 $arch
pcp-5.2.2/qa/623:58: mv $arch `echo $arch | sed -e "s/ok-mv-bigbin/${DATE}.01.02/"`
pcp-5.2.2/qa/623-59- done
##############################################
pcp-5.2.2/qa/624-8-
pcp-5.2.2/qa/624:9:seq=`basename $0`
pcp-5.2.2/qa/624-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/625-8-
pcp-5.2.2/qa/625:9:seq=`basename $0`
pcp-5.2.2/qa/625-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/626-9-
pcp-5.2.2/qa/626:10:seq=`basename $0`
pcp-5.2.2/qa/626-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/627-7-
pcp-5.2.2/qa/627:8:seq=`basename $0`
pcp-5.2.2/qa/627-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/628-8-
pcp-5.2.2/qa/628:9:seq=`basename $0`
pcp-5.2.2/qa/628-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/629-7-
pcp-5.2.2/qa/629:8:seq=`basename $0`
pcp-5.2.2/qa/629-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/629-68- echo | tee -a $here/$seq.full
pcp-5.2.2/qa/629:69: echo "=== one data volume compressed, `echo $arg | sed -e s@$SUFF@SUFF@` as arg ===" | tee -a $here/$seq.full
pcp-5.2.2/qa/629-70- rm -f foo.* ok-mv-bigbin.*
##############################################
pcp-5.2.2/qa/629-88- echo | tee -a $here/$seq.full
pcp-5.2.2/qa/629:89: echo "=== all data volumes compressed, arg as `echo $arg | sed -e s@$SUFF@SUFF@` ===" | tee -a $here/$seq.full
pcp-5.2.2/qa/629-90- rm -f foo.* ok-mv-bigbin.*
##############################################
pcp-5.2.2/qa/629-111- echo | tee -a $here/$seq.full
pcp-5.2.2/qa/629:112: echo "=== all files compressed, `echo $arg | sed -e s@$SUFF@SUFF@` as arg ===" | tee -a $here/$seq.full
pcp-5.2.2/qa/629-113- rm -f foo.* ok-mv-bigbin.*
##############################################
pcp-5.2.2/qa/630-7-
pcp-5.2.2/qa/630:8:seq=`basename $0`
pcp-5.2.2/qa/630-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/630-50- echo -n " $file"
pcp-5.2.2/qa/630:51: owner=`ls -ld $file | $PCP_AWK_PROG '{print $3}'`
pcp-5.2.2/qa/630-52- [ "$owner" != $me ] && echo " (owner $owner)"
##############################################
pcp-5.2.2/qa/631-7-
pcp-5.2.2/qa/631:8:seq=`basename $0`
pcp-5.2.2/qa/631-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/632-7-
pcp-5.2.2/qa/632:8:seq=`basename $0`
pcp-5.2.2/qa/632-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/633-7-
pcp-5.2.2/qa/633:8:seq=`basename $0`
pcp-5.2.2/qa/633-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/634-7-
pcp-5.2.2/qa/634:8:seq=`basename $0`
pcp-5.2.2/qa/634-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/635-7-
pcp-5.2.2/qa/635:8:seq=`basename $0`
pcp-5.2.2/qa/635-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/635-206-echo "=== pminfo ==" >>$seq.full
pcp-5.2.2/qa/635:207:for m in `cat $tmp.metrics`
pcp-5.2.2/qa/635-208-do
##############################################
pcp-5.2.2/qa/635-218-
pcp-5.2.2/qa/635:219:otherhost=`./getpmcdhosts -L -n 1 2>$tmp.out`
pcp-5.2.2/qa/635:220:[ -z "$otherhost" ] && _notrun `cat $tmp.out`
pcp-5.2.2/qa/635-221-
##############################################
pcp-5.2.2/qa/635-227-
pcp-5.2.2/qa/635:228:for m in `cat $tmp.metrics`
pcp-5.2.2/qa/635-229-do
##############################################
pcp-5.2.2/qa/635-299-#
pcp-5.2.2/qa/635:300:for m in `cat $tmp.metrics`
pcp-5.2.2/qa/635-301-do
##############################################
pcp-5.2.2/qa/636-7-
pcp-5.2.2/qa/636:8:seq=`basename $0`
pcp-5.2.2/qa/636-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/637-7-
pcp-5.2.2/qa/637:8:seq=`basename $0`
pcp-5.2.2/qa/637-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/637-76-find $tmp -type f | sort >$tmp.list
pcp-5.2.2/qa/637:77:for arch in `sed -n -e '/\.meta/s/\.meta.*//p' <$tmp.list`
pcp-5.2.2/qa/637-78-do
##############################################
pcp-5.2.2/qa/638-7-
pcp-5.2.2/qa/638:8:seq=`basename $0`
pcp-5.2.2/qa/638-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/639-7-
pcp-5.2.2/qa/639:8:seq=`basename $0`
pcp-5.2.2/qa/639-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/640-11-
pcp-5.2.2/qa/640:12:seq=`basename $0`
pcp-5.2.2/qa/640-13-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/641-7-
pcp-5.2.2/qa/641:8:seq=`basename $0`
pcp-5.2.2/qa/641-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/641-62-find $tmp -type f | sort >$tmp.list
pcp-5.2.2/qa/641:63:for arch in `sed -n -e '/\.meta/s/\.meta.*//p' <$tmp.list`
pcp-5.2.2/qa/641-64-do
##############################################
pcp-5.2.2/qa/642-8-
pcp-5.2.2/qa/642:9:seq=`basename $0`
pcp-5.2.2/qa/642-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/642-98- cd ..
pcp-5.2.2/qa/642:99: i=`expr $i + 1`
pcp-5.2.2/qa/642-100-done
##############################################
pcp-5.2.2/qa/643-7-
pcp-5.2.2/qa/643:8:seq=`basename $0`
pcp-5.2.2/qa/643-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/644-7-
pcp-5.2.2/qa/644:8:seq=`basename $0`
pcp-5.2.2/qa/644-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/645-7-
pcp-5.2.2/qa/645:8:seq=`basename $0`
pcp-5.2.2/qa/645-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/646-9-
pcp-5.2.2/qa/646:10:seq=`basename $0`
pcp-5.2.2/qa/646-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/647-7-
pcp-5.2.2/qa/647:8:seq=`basename $0`
pcp-5.2.2/qa/647-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/647-70-then
pcp-5.2.2/qa/647:71: for name in `cat $tmp.names`
pcp-5.2.2/qa/647-72- do
##############################################
pcp-5.2.2/qa/647-85-then
pcp-5.2.2/qa/647:86: for name in `cat $tmp.names`
pcp-5.2.2/qa/647-87- do
##############################################
pcp-5.2.2/qa/648-7-
pcp-5.2.2/qa/648:8:seq=`basename $0`
pcp-5.2.2/qa/648-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/648-69-then
pcp-5.2.2/qa/648:70: for name in `cat $tmp.names`
pcp-5.2.2/qa/648-71- do
##############################################
pcp-5.2.2/qa/649-7-
pcp-5.2.2/qa/649:8:seq=`basename $0`
pcp-5.2.2/qa/649-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/650-7-
pcp-5.2.2/qa/650:8:seq=`basename $0`
pcp-5.2.2/qa/650-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/651-7-
pcp-5.2.2/qa/651:8:seq=`basename $0`
pcp-5.2.2/qa/651-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/651-82- cat $tmp.tmp >>$here/$seq.full
pcp-5.2.2/qa/651:83: sts=`$PCP_AWK_PROG <$tmp.tmp '{print $2}'`
pcp-5.2.2/qa/651-84- echo "sts=$sts" >>$here/$seq.full
##############################################
pcp-5.2.2/qa/652-6-#
pcp-5.2.2/qa/652:7:seq=`basename $0`
pcp-5.2.2/qa/652-8-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/652-17-which journalctl >/dev/null 2>&1 || _notrun no journalctl
pcp-5.2.2/qa/652:18:journal_version=`journalctl --version | grep ^systemd | awk '{print $2}'`
pcp-5.2.2/qa/652-19-[ "$journal_version" -ge 193 ] || _notrun journalctl too old "$journal_version"
##############################################
pcp-5.2.2/qa/652-84-#
pcp-5.2.2/qa/652:85:numval=`pmprobe -v systemd.numclients | tee -a $here/$seq.full | $PCP_AWK_PROG '{print $2}'`
pcp-5.2.2/qa/652-86-if [ "$numval" -lt 0 ]
##############################################
pcp-5.2.2/qa/653-6-#
pcp-5.2.2/qa/653:7:seq=`basename $0`
pcp-5.2.2/qa/653-8-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/654-8-#
pcp-5.2.2/qa/654:9:seq=`basename $0`
pcp-5.2.2/qa/654-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/654-18-# check for any loopback devices, cowardly abort this test if any exist
pcp-5.2.2/qa/654:19:loopcount=`$sudo losetup -a | wc -l`
pcp-5.2.2/qa/654-20-[ $loopcount -eq 0 ] || _notrun "System has loop devices already, bailing"
##############################################
pcp-5.2.2/qa/655-8-#
pcp-5.2.2/qa/655:9:seq=`basename $0`
pcp-5.2.2/qa/655-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/655-20-# check for any loopback devices, cowardly abort this test if any exist
pcp-5.2.2/qa/655:21:loopcount=`$sudo losetup -a | wc -l`
pcp-5.2.2/qa/655-22-[ $loopcount -eq 0 ] || _notrun "System has loop devices already, bailing"
##############################################
pcp-5.2.2/qa/656-6-# Copyright (c) 2014-2015 Red Hat, Inc. All Rights Reserved.
pcp-5.2.2/qa/656:7:seq=`basename $0`
pcp-5.2.2/qa/656-8-
##############################################
pcp-5.2.2/qa/656-50-do
pcp-5.2.2/qa/656:51: base=`basename $tgz`
pcp-5.2.2/qa/656-52- echo
##############################################
pcp-5.2.2/qa/657-8-#
pcp-5.2.2/qa/657:9:seq=`basename $0`
pcp-5.2.2/qa/657-10-
##############################################
pcp-5.2.2/qa/658-7-
pcp-5.2.2/qa/658:8:seq=`basename $0`
pcp-5.2.2/qa/658-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/658-78-find $tmp -type f | sort >$tmp.list
pcp-5.2.2/qa/658:79:for arch in `sed -n -e '/\.meta/s/\.meta.*//p' <$tmp.list`
pcp-5.2.2/qa/658-80-do
##############################################
pcp-5.2.2/qa/659-7-
pcp-5.2.2/qa/659:8:seq=`basename $0`
pcp-5.2.2/qa/659-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/659-68- echo | tee -a $here/$seq.full
pcp-5.2.2/qa/659:69: echo "=== one data volume compressed, `echo $arg | sed -e s@$SUFF@SUFF@` as arg ===" | tee -a $here/$seq.full
pcp-5.2.2/qa/659-70- rm -f foo.* ok-mv-bigbin.*
##############################################
pcp-5.2.2/qa/659-88- echo | tee -a $here/$seq.full
pcp-5.2.2/qa/659:89: echo "=== all data volumes compressed, arg as `echo $arg | sed -e s@$SUFF@SUFF@` ===" | tee -a $here/$seq.full
pcp-5.2.2/qa/659-90- rm -f foo.* ok-mv-bigbin.*
##############################################
pcp-5.2.2/qa/659-111- echo | tee -a $here/$seq.full
pcp-5.2.2/qa/659:112: echo "=== all files compressed, `echo $arg | sed -e s@$SUFF@SUFF@` as arg ===" | tee -a $here/$seq.full
pcp-5.2.2/qa/659-113- rm -f foo.* ok-mv-bigbin.*
##############################################
pcp-5.2.2/qa/660-6-#
pcp-5.2.2/qa/660:7:seq=`basename $0`
pcp-5.2.2/qa/660-8-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/660-110-
pcp-5.2.2/qa/660:111:ipv6local=`_ipv6_localhost 2>>$seq.full`
pcp-5.2.2/qa/660-112-echo "ipv6local=$ipv6local" >>$seq.full
##############################################
pcp-5.2.2/qa/660-259- curl -s -L -S "http://localhost:$PORT/src/" > $tmp.out
pcp-5.2.2/qa/660:260: c=`expr $c + 1`
pcp-5.2.2/qa/660-261-done
##############################################
pcp-5.2.2/qa/662-6-#
pcp-5.2.2/qa/662:7:seq=`basename $0`
pcp-5.2.2/qa/662-8-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/664-7-
pcp-5.2.2/qa/664:8:seq=`basename $0`
pcp-5.2.2/qa/664-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/664-88-find $tmp -type f | sort >$tmp.list
pcp-5.2.2/qa/664:89:for arch in `sed -n -e '/\.meta/s/\.meta.*//p' <$tmp.list`
pcp-5.2.2/qa/664-90-do
##############################################
pcp-5.2.2/qa/665-7-
pcp-5.2.2/qa/665:8:seq=`basename $0`
pcp-5.2.2/qa/665-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/665-31-pmda=$PCP_PMDAS_DIR/linux/pmda_linux.so,linux_init
pcp-5.2.2/qa/665:32:files=`echo $here/linux/proc_serial_tty* | LC_COLLATE=POSIX sort`
pcp-5.2.2/qa/665-33-metrics=`pminfo tty`
##############################################
pcp-5.2.2/qa/665-40- cp $file $root/proc/tty/driver/serial
pcp-5.2.2/qa/665:41: base=`basename $file`
pcp-5.2.2/qa/665-42- echo "== Checking serial tty metrics from $base without sudo"
##############################################
pcp-5.2.2/qa/666-6-#
pcp-5.2.2/qa/666:7:seq=`basename $0`
pcp-5.2.2/qa/666-8-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/666-125- rm -f $tmp.ok
pcp-5.2.2/qa/666:126: i=`expr $i + 1`
pcp-5.2.2/qa/666-127- echo "pmlogger & pmie probe #$i `date`" >>$seq.full
##############################################
pcp-5.2.2/qa/666-153-# there should be three archives ... unless some timing glitch interfered
pcp-5.2.2/qa/666:154:count=`ls -1 $tmp.dir/$hostname/*.meta | wc -l`
pcp-5.2.2/qa/666-155-if [ $count -gt 1 ]; then
##############################################
pcp-5.2.2/qa/666-186-# there should be only two; one merged and one just-written-to
pcp-5.2.2/qa/666:187:count=`ls -1 $tmp.dir/$hostname/*.meta | wc -l`
pcp-5.2.2/qa/666-188-if [ $count -lt 3 ]; then
##############################################
pcp-5.2.2/qa/666-237-# there should be 3 archive-*, unless timing glitches
pcp-5.2.2/qa/666:238:count=`ls -1 $tmp.dir/$hostname/archive*.meta | wc -l`
pcp-5.2.2/qa/666-239-if [ $count -gt 0 -a $count -lt 5 ]; then
##############################################
pcp-5.2.2/qa/666-244-fi
pcp-5.2.2/qa/666:245:count=`ls -1 $tmp.dir/$hostname/reduced*.meta | wc -l`
pcp-5.2.2/qa/666-246-if [ $count -gt 0 -a $count -lt 4 ]; then
##############################################
pcp-5.2.2/qa/667-6-#
pcp-5.2.2/qa/667:7:seq=`basename $0`
pcp-5.2.2/qa/667-8-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/667-71-
pcp-5.2.2/qa/667:72:ncpu=`pmprobe -v hinv.ncpu | awk '{print $3}'`
pcp-5.2.2/qa/667-73-pcp2graphite="$python `which pcp2graphite`"
##############################################
pcp-5.2.2/qa/668-6-#
pcp-5.2.2/qa/668:7:seq=`basename $0`
pcp-5.2.2/qa/668-8-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/668-112-echo "=== 3. check that the containers were found ===" | tee -a $seq.full
pcp-5.2.2/qa/668:113:num=`ls $tmp.dir/$hostname--*/config.pmlogger 2>/dev/null | wc -l`
pcp-5.2.2/qa/668-114-# there might be more if the machine's already running other containers
##############################################
pcp-5.2.2/qa/668-119-fi
pcp-5.2.2/qa/668:120:num=`ls $tmp.dir/$hostname--*/*.meta 2>/dev/null | wc -l`
pcp-5.2.2/qa/668-121-if [ "$num" -ge 3 ]; then
##############################################
pcp-5.2.2/qa/668-125-fi
pcp-5.2.2/qa/668:126:num=`ls $tmp.dir/$hostname--*/config.pmie 2>/dev/null | wc -l`
pcp-5.2.2/qa/668-127-if [ "$num" -ge 3 ]; then
##############################################
pcp-5.2.2/qa/669-6-#
pcp-5.2.2/qa/669:7:seq=`basename $0`
pcp-5.2.2/qa/669-8-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/669-89-ls -l $tmp.dir/$hostname >> $seq.full
pcp-5.2.2/qa/669:90:num=`ls -1 $tmp.dir/$hostname/*.index | wc -l | sed -e 's/ //g'`
pcp-5.2.2/qa/669-91-if [ $num -gt 30 ]; then
##############################################
pcp-5.2.2/qa/669-111-ls -l $tmp.dir/$hostname >> $seq.full
pcp-5.2.2/qa/669:112:num=`ls -1 $tmp.dir/$hostname/*.index | wc -l | sed -e 's/ //g'`
pcp-5.2.2/qa/669-113-if [ $num -lt 5 ]; then
##############################################
pcp-5.2.2/qa/670-8-
pcp-5.2.2/qa/670:9:seq=`basename $0`
pcp-5.2.2/qa/670-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/671-7-
pcp-5.2.2/qa/671:8:seq=`basename $0`
pcp-5.2.2/qa/671-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/672-8-
pcp-5.2.2/qa/672:9:seq=`basename $0`
pcp-5.2.2/qa/672-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/673-7-
pcp-5.2.2/qa/673:8:seq=`basename $0`
pcp-5.2.2/qa/673-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/674-7-
pcp-5.2.2/qa/674:8:seq=`basename $0`
pcp-5.2.2/qa/674-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/675-7-
pcp-5.2.2/qa/675:8:seq=`basename $0`
pcp-5.2.2/qa/675-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/675-101- touch foo/$base.index.$suff
pcp-5.2.2/qa/675:102: base=`expr $base + 1`
pcp-5.2.2/qa/675-103-done
##############################################
pcp-5.2.2/qa/675-175-do
pcp-5.2.2/qa/675:176: arch=`echo $arch | sed -e 's/.meta//'`
pcp-5.2.2/qa/675-177- echo $arch:
##############################################
pcp-5.2.2/qa/675-205-do
pcp-5.2.2/qa/675:206: arch=`echo $arch | sed -e 's/.meta.*//'`
pcp-5.2.2/qa/675-207- echo $arch:
##############################################
pcp-5.2.2/qa/676-7-
pcp-5.2.2/qa/676:8:seq=`basename $0`
pcp-5.2.2/qa/676-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/676-75-do
pcp-5.2.2/qa/676:76: arch=`echo $arch | sed -e 's/.meta//'`
pcp-5.2.2/qa/676-77- echo $arch:
##############################################
pcp-5.2.2/qa/676-105-do
pcp-5.2.2/qa/676:106: arch=`echo $arch | sed -e 's/.meta.*//'`
pcp-5.2.2/qa/676-107- echo $arch:
##############################################
pcp-5.2.2/qa/677-7-
pcp-5.2.2/qa/677:8:seq=`basename $0`
pcp-5.2.2/qa/677-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/677-24-{
pcp-5.2.2/qa/677:25: tmpx=`echo $tmp`
pcp-5.2.2/qa/677-26- sed -e 's/^Archive:.* Host:/ARCHIVE: Host:/' \
##############################################
pcp-5.2.2/qa/678-7-
pcp-5.2.2/qa/678:8:seq=`basename $0`
pcp-5.2.2/qa/678-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/678-75-do
pcp-5.2.2/qa/678:76: arch=`echo $arch | sed -e 's/.meta//'`
pcp-5.2.2/qa/678-77- echo $arch:
##############################################
pcp-5.2.2/qa/678-105-do
pcp-5.2.2/qa/678:106: arch=`echo $arch | sed -e 's/.meta.*//'`
pcp-5.2.2/qa/678-107- echo $arch:
##############################################
pcp-5.2.2/qa/679-7-
pcp-5.2.2/qa/679:8:seq=`basename $0`
pcp-5.2.2/qa/679-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/679-154-do
pcp-5.2.2/qa/679:155: arch=`echo $file | sed -e 's/\.meta$//'`
pcp-5.2.2/qa/679-156- echo "$arch:"
##############################################
pcp-5.2.2/qa/679-169-do
pcp-5.2.2/qa/679:170: arch=`echo $file | sed -e 's/\.meta$//'`
pcp-5.2.2/qa/679-171- echo "$arch:"
##############################################
pcp-5.2.2/qa/679-193-do
pcp-5.2.2/qa/679:194: arch=`echo $file | sed -e 's/\.meta$//'`
pcp-5.2.2/qa/679-195- echo "$arch:"
##############################################
pcp-5.2.2/qa/680-7-
pcp-5.2.2/qa/680:8:seq=`basename $0`
pcp-5.2.2/qa/680-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/681-8-
pcp-5.2.2/qa/681:9:seq=`basename $0`
pcp-5.2.2/qa/681-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/681-69-do
pcp-5.2.2/qa/681:70: i=`expr $i + 1`
pcp-5.2.2/qa/681-71- echo "[$i] $1"
##############################################
pcp-5.2.2/qa/682-7-
pcp-5.2.2/qa/682:8:seq=`basename $0`
pcp-5.2.2/qa/682-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/683-7-
pcp-5.2.2/qa/683:8:seq=`basename $0`
pcp-5.2.2/qa/683-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/684-7-
pcp-5.2.2/qa/684:8:seq=`basename $0`
pcp-5.2.2/qa/684-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/684-24-{
pcp-5.2.2/qa/684:25: tmpx=`echo $tmp`
pcp-5.2.2/qa/684-26- sed -e 's/^Archive:.* Host:/ARCHIVE: Host:/' \
##############################################
pcp-5.2.2/qa/685-10-
pcp-5.2.2/qa/685:11:seq=`basename $0`
pcp-5.2.2/qa/685-12-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/686-7-
pcp-5.2.2/qa/686:8:seq=`basename $0`
pcp-5.2.2/qa/686-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/687-8-
pcp-5.2.2/qa/687:9:seq=`basename $0`
pcp-5.2.2/qa/687-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/688-7-
pcp-5.2.2/qa/688:8:seq=`basename $0`
pcp-5.2.2/qa/688-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/689-7-
pcp-5.2.2/qa/689:8:seq=`basename $0`
pcp-5.2.2/qa/689-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/689-28-{
pcp-5.2.2/qa/689:29: tmpx=`echo $tmp`
pcp-5.2.2/qa/689-30- sed -e 's/^Archive:.* Host:/ARCHIVE: Host:/' \
##############################################
pcp-5.2.2/qa/690-7-
pcp-5.2.2/qa/690:8:seq=`basename $0`
pcp-5.2.2/qa/690-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/691-7-
pcp-5.2.2/qa/691:8:seq=`basename $0`
pcp-5.2.2/qa/691-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/692-9-
pcp-5.2.2/qa/692:10:seq=`basename $0`
pcp-5.2.2/qa/692-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/693-7-
pcp-5.2.2/qa/693:8:seq=`basename $0`
pcp-5.2.2/qa/693-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/694-8-
pcp-5.2.2/qa/694:9:seq=`basename $0`
pcp-5.2.2/qa/694-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/695-7-
pcp-5.2.2/qa/695:8:seq=`basename $0`
pcp-5.2.2/qa/695-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/695-53-cat $tmp.out >> $here/$seq.full
pcp-5.2.2/qa/695:54:seconds=`cat $tmp.out | awk '{print $3}'`
pcp-5.2.2/qa/695-55-
##############################################
pcp-5.2.2/qa/696-7-
pcp-5.2.2/qa/696:8:seq=`basename $0`
pcp-5.2.2/qa/696-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/696-51-cat $tmp.out >> $here/$seq.full
pcp-5.2.2/qa/696:52:seconds=`cat $tmp.out | awk '{print $3}'`
pcp-5.2.2/qa/696-53-
##############################################
pcp-5.2.2/qa/697-8-
pcp-5.2.2/qa/697:9:seq=`basename $0`
pcp-5.2.2/qa/697-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/698-9-
pcp-5.2.2/qa/698:10:seq=`basename $0`
pcp-5.2.2/qa/698-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/699-7-
pcp-5.2.2/qa/699:8:seq=`basename $0`
pcp-5.2.2/qa/699-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/700-8-
pcp-5.2.2/qa/700:9:seq=`basename $0`
pcp-5.2.2/qa/700-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/700-40-# end
pcp-5.2.2/qa/700:41:pcp_version=`sed -n <$tmp.list -e '/^pcp /s/pcp //p'`
pcp-5.2.2/qa/700-42-$PCP_AWK_PROG <$tmp.list '
##############################################
pcp-5.2.2/qa/701-7-
pcp-5.2.2/qa/701:8:seq=`basename $0`
pcp-5.2.2/qa/701-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/702-7-
pcp-5.2.2/qa/702:8:seq=`basename $0`
pcp-5.2.2/qa/702-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/703-8-
pcp-5.2.2/qa/703:9:seq=`basename $0`
pcp-5.2.2/qa/703-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/704-7-
pcp-5.2.2/qa/704:8:seq=`basename $0`
pcp-5.2.2/qa/704-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/705-7-
pcp-5.2.2/qa/705:8:seq=`basename $0`
pcp-5.2.2/qa/705-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/706-8-
pcp-5.2.2/qa/706:9:seq=`basename $0`
pcp-5.2.2/qa/706-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/706-38- src/multifetch -s 100 >$tmp.$i 2>&1 &
pcp-5.2.2/qa/706:39: i=`expr $i + 1`
pcp-5.2.2/qa/706-40-done
##############################################
pcp-5.2.2/qa/706-49- cat $tmp.$i
pcp-5.2.2/qa/706:50: i=`expr $i + 1`
pcp-5.2.2/qa/706-51-done
##############################################
pcp-5.2.2/qa/707-7-
pcp-5.2.2/qa/707:8:seq=`basename $0`
pcp-5.2.2/qa/707-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/708-7-
pcp-5.2.2/qa/708:8:seq=`basename $0`
pcp-5.2.2/qa/708-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/710-7-
pcp-5.2.2/qa/710:8:seq=`basename $0`
pcp-5.2.2/qa/710-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/711-7-
pcp-5.2.2/qa/711:8:seq=`basename $0`
pcp-5.2.2/qa/711-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/712-7-
pcp-5.2.2/qa/712:8:seq=`basename $0`
pcp-5.2.2/qa/712-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/713-7-
pcp-5.2.2/qa/713:8:seq=`basename $0`
pcp-5.2.2/qa/713-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/713-76-unset PCP_RUN_DIR
pcp-5.2.2/qa/713:77:eval `$PCP_BINADM_DIR/pmconfig -s PCP_RUN_DIR`
pcp-5.2.2/qa/713-78-
##############################################
pcp-5.2.2/qa/714-7-
pcp-5.2.2/qa/714:8:seq=`basename $0`
pcp-5.2.2/qa/714-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/715-7-
pcp-5.2.2/qa/715:8:seq=`basename $0`
pcp-5.2.2/qa/715-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/716-7-
pcp-5.2.2/qa/716:8:seq=`basename $0`
pcp-5.2.2/qa/716-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/717-7-
pcp-5.2.2/qa/717:8:seq=`basename $0`
pcp-5.2.2/qa/717-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/718-7-
pcp-5.2.2/qa/718:8:seq=`basename $0`
pcp-5.2.2/qa/718-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/718-18-
pcp-5.2.2/qa/718:19:python_path=`which $python`
pcp-5.2.2/qa/718-20-status=1
##############################################
pcp-5.2.2/qa/719-4-
pcp-5.2.2/qa/719:5:seq=`basename $0`
pcp-5.2.2/qa/719-6-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/720-4-
pcp-5.2.2/qa/720:5:seq=`basename $0`
pcp-5.2.2/qa/720-6-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/721-4-
pcp-5.2.2/qa/721:5:seq=`basename $0`
pcp-5.2.2/qa/721-6-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/722-8-
pcp-5.2.2/qa/722:9:seq=`basename $0`
pcp-5.2.2/qa/722-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/723-7-
pcp-5.2.2/qa/723:8:seq=`basename $0`
pcp-5.2.2/qa/723-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/723-31-#debug# ls -l /proc/$pid/attr/current
pcp-5.2.2/qa/723:32:syslabel=`cat /proc/$pid/attr/current | tr '\0' '\n'`
pcp-5.2.2/qa/723-33-echo "SYS Label for process $pid is: $syslabel" >> $seq.full
##############################################
pcp-5.2.2/qa/724-7-
pcp-5.2.2/qa/724:8:seq=`basename $0`
pcp-5.2.2/qa/724-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/725-7-
pcp-5.2.2/qa/725:8:seq=`basename $0`
pcp-5.2.2/qa/725-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/725-149- then
pcp-5.2.2/qa/725:150: for name in `cat $tmp.names`
pcp-5.2.2/qa/725-151- do
##############################################
pcp-5.2.2/qa/726-8-
pcp-5.2.2/qa/726:9:seq=`basename $0`
pcp-5.2.2/qa/726-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/728-7-
pcp-5.2.2/qa/728:8:seq=`basename $0`
pcp-5.2.2/qa/728-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/729-7-
pcp-5.2.2/qa/729:8:seq=`basename $0`
pcp-5.2.2/qa/729-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/730-7-
pcp-5.2.2/qa/730:8:seq=`basename $0`
pcp-5.2.2/qa/730-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/730-34-pmda=$PCP_PMDAS_DIR/proc/pmda_proc.so,proc_init
pcp-5.2.2/qa/730:35:trees=`pminfo cgroup | awk -F. '{ print $2 }' | sort -u`
pcp-5.2.2/qa/730-36-
##############################################
pcp-5.2.2/qa/730-44- tar xzf $tgz
pcp-5.2.2/qa/730:45: base=`basename $tgz`
pcp-5.2.2/qa/730-46-
##############################################
pcp-5.2.2/qa/730-51- echo "== Checking metric descriptors and values - $base"
pcp-5.2.2/qa/730:52: for metric in `cat $tmp.names`
pcp-5.2.2/qa/730-53- do
##############################################
pcp-5.2.2/qa/730-63- do
pcp-5.2.2/qa/730:64: name=`pminfo cgroup.$tree | sed 1q`
pcp-5.2.2/qa/730-65- echo "== Checking out multi-sample monitor tool - $base"
##############################################
pcp-5.2.2/qa/731-7-
pcp-5.2.2/qa/731:8:seq=`basename $0`
pcp-5.2.2/qa/731-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/731-28- grep '^cgroup' $tmp.out | LC_COLLATE=POSIX sort
pcp-5.2.2/qa/731:29: nvalue=`grep 'inst \[' <$tmp.out | wc -l | sed -e 's/ //g'`
pcp-5.2.2/qa/731-30- echo
##############################################
pcp-5.2.2/qa/731-41-pmda=$PCP_PMDAS_DIR/proc/pmda_proc.so,proc_init
pcp-5.2.2/qa/731:42:trees=`pminfo cgroup | awk -F. '{ print $2 }' | sort -u`
pcp-5.2.2/qa/731-43-
##############################################
pcp-5.2.2/qa/731-49- tar xzf $tgz
pcp-5.2.2/qa/731:50: base=`basename $tgz`
pcp-5.2.2/qa/731-51-
##############################################
pcp-5.2.2/qa/731-62- do
pcp-5.2.2/qa/731:63: name=`pminfo cgroup.$tree | sed 1q`
pcp-5.2.2/qa/731-64- echo "== Running valgrind on $tree for multiple fetches - $base"
##############################################
pcp-5.2.2/qa/732-7-
pcp-5.2.2/qa/732:8:seq=`basename $0`
pcp-5.2.2/qa/732-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/732-32- tar xzf $tgz
pcp-5.2.2/qa/732:33: base=`basename $tgz`
pcp-5.2.2/qa/732-34-
##############################################
pcp-5.2.2/qa/733-12-
pcp-5.2.2/qa/733:13:seq=`basename $0`
pcp-5.2.2/qa/733-14-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/734-7-
pcp-5.2.2/qa/734:8:seq=`basename $0`
pcp-5.2.2/qa/734-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/734-21-# useful even with more recent remotes (exercises different paths).
pcp-5.2.2/qa/734:22:oldhost=`./getpmcdhosts -L -n 1 -v 'pcp<3.8.4' 2>$seq.full`
pcp-5.2.2/qa/734-23-[ -z "$oldhost" ] && oldhost=`./getpmcdhosts -L -n 1`
pcp-5.2.2/qa/734-24-[ -z "$oldhost" ] && _notrun "No remote hosts available"
pcp-5.2.2/qa/734:25:short_oldhost=`echo $oldhost | sed -e 's/\..*//'`
pcp-5.2.2/qa/734-26-# match pmstat(1) truncation
pcp-5.2.2/qa/734:27:short_oldhost=`printf "%-7.7s" "$short_oldhost" | sed -e 's/ *$//'`
pcp-5.2.2/qa/734-28-
##############################################
pcp-5.2.2/qa/734-31-eval newhost=$3
pcp-5.2.2/qa/734:32:short_newhost=`echo $newhost | sed -e 's/\..*//'`
pcp-5.2.2/qa/734-33-# match pmstat(1) truncation
pcp-5.2.2/qa/734:34:short_newhost=`printf "%-7.7s" "$short_newhost" | sed -e 's/ *$//'`
pcp-5.2.2/qa/734-35-
##############################################
pcp-5.2.2/qa/735-7-
pcp-5.2.2/qa/735:8:seq=`basename $0`
pcp-5.2.2/qa/735-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/735-82- tar xzf $tgz
pcp-5.2.2/qa/735:83: base=`basename $tgz`
pcp-5.2.2/qa/735-84-
##############################################
pcp-5.2.2/qa/736-7-
pcp-5.2.2/qa/736:8:seq=`basename $0`
pcp-5.2.2/qa/736-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/737-7-
pcp-5.2.2/qa/737:8:seq=`basename $0`
pcp-5.2.2/qa/737-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/738-7-
pcp-5.2.2/qa/738:8:seq=`basename $0`
pcp-5.2.2/qa/738-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/739-7-
pcp-5.2.2/qa/739:8:seq=`basename $0`
pcp-5.2.2/qa/739-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/740-8-
pcp-5.2.2/qa/740:9:seq=`basename $0`
pcp-5.2.2/qa/740-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/740-51-# store to enable verbose attribute diagnostics
pcp-5.2.2/qa/740:52:authdbg=`pmdbg -o -l | grep DBG_TRACE_AUTH | awk '{ print $2 }'`
pcp-5.2.2/qa/740-53-pmstore sample.control $authdbg
##############################################
pcp-5.2.2/qa/741-7-
pcp-5.2.2/qa/741:8:seq=`basename $0`
pcp-5.2.2/qa/741-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/741-19-
pcp-5.2.2/qa/741:20:eval HOST=`pmprobe -v pmcd.hostname | awk '{ print $3 }'`
pcp-5.2.2/qa/741-21-
##############################################
pcp-5.2.2/qa/742-7-
pcp-5.2.2/qa/742:8:seq=`basename $0`
pcp-5.2.2/qa/742-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/743-7-
pcp-5.2.2/qa/743:8:seq=`basename $0`
pcp-5.2.2/qa/743-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/744-7-
pcp-5.2.2/qa/744:8:seq=`basename $0`
pcp-5.2.2/qa/744-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/744-30- then
pcp-5.2.2/qa/744:31: _notrun "Conflicting system NVIDIA library found: `cat $tmp.libs`"
pcp-5.2.2/qa/744-32- # NOTREACHED
##############################################
pcp-5.2.2/qa/745-7-
pcp-5.2.2/qa/745:8:seq=`basename $0`
pcp-5.2.2/qa/745-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/745-31- then
pcp-5.2.2/qa/745:32: _notrun "Conflicting system NVIDIA library found: `cat $tmp.libs`"
pcp-5.2.2/qa/745-33- # NOTREACHED
##############################################
pcp-5.2.2/qa/746-8-
pcp-5.2.2/qa/746:9:seq=`basename $0`
pcp-5.2.2/qa/746-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/747-7-
pcp-5.2.2/qa/747:8:seq=`basename $0`
pcp-5.2.2/qa/747-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/747-37-hinv_metrics="hinv.cpu.online hinv.node.online"
pcp-5.2.2/qa/747:38:allcpu_metrics=`pminfo $local kernel.all.cpu | LC_COLLATE=POSIX sort`
pcp-5.2.2/qa/747:39:percpu_metrics=`pminfo $local kernel.percpu.cpu | LC_COLLATE=POSIX sort`
pcp-5.2.2/qa/747:40:pernode_metrics=`pminfo $local kernel.pernode.cpu | LC_COLLATE=POSIX sort`
pcp-5.2.2/qa/747-41-
##############################################
pcp-5.2.2/qa/747-46- $sudo tar xzf $tgz
pcp-5.2.2/qa/747:47: base=`basename $tgz`
pcp-5.2.2/qa/747-48-
##############################################
pcp-5.2.2/qa/748-7-
pcp-5.2.2/qa/748:8:seq=`basename $0`
pcp-5.2.2/qa/748-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/749-6-
pcp-5.2.2/qa/749:7:seq=`basename $0`
pcp-5.2.2/qa/749-8-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/749-28-fips_stsfile="/proc/sys/crypto/fips_enabled"
pcp-5.2.2/qa/749:29:[ -f $fips_stsfile ] && fips_enabled=`cat $fips_stsfile`
pcp-5.2.2/qa/749-30-test $fips_enabled -eq 0 || _notrun "FIPS enabled, no kernel stap testing"
##############################################
pcp-5.2.2/qa/750-6-#
pcp-5.2.2/qa/750:7:seq=`basename $0`
pcp-5.2.2/qa/750-8-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/750-53-{
pcp-5.2.2/qa/750:54: pre_bytes=`pmprobe -v rpm.total.bytes | tee $tmp.tmp | awk '$2==1 { print $3 }'`
pcp-5.2.2/qa/750-55- if [ -z "$pre_bytes" ]
##############################################
pcp-5.2.2/qa/750-60- fi
pcp-5.2.2/qa/750:61: pre_count=`pmprobe -v rpm.total.count | tee $tmp.tmp | awk '$2==1 { print $3 }'`
pcp-5.2.2/qa/750-62- if [ -z "$pre_count" ]
##############################################
pcp-5.2.2/qa/750-73-{
pcp-5.2.2/qa/750:74: post_bytes=`pmprobe -v rpm.total.bytes | tee $tmp.tmp | awk '$2==1 { print $3 }'`
pcp-5.2.2/qa/750-75- if [ -z "$post_bytes" ]
##############################################
pcp-5.2.2/qa/750-80- fi
pcp-5.2.2/qa/750:81: post_count=`pmprobe -v rpm.total.count | tee $tmp.tmp | awk '$2==1 { print $3 }'`
pcp-5.2.2/qa/750-82- if [ -z "$post_count" ]
##############################################
pcp-5.2.2/qa/750-88-
pcp-5.2.2/qa/750:89: diff_bytes=`expr $post_bytes - $pre_bytes`
pcp-5.2.2/qa/750-90- echo "bytes diff: $post_bytes - $pre_bytes = $diff_bytes" >> $seq.full
##############################################
pcp-5.2.2/qa/750-92-
pcp-5.2.2/qa/750:93: diff_count=`expr $post_count - $pre_count`
pcp-5.2.2/qa/750-94- echo "count diff: $post_count - $pre_count = $diff_count" >> $seq.full
##############################################
pcp-5.2.2/qa/750-123-do
pcp-5.2.2/qa/750:124: if [ `pmprobe -v rpm.total.bytes | tee -a $seq.full | $PCP_AWK_PROG '{print $2}'` -ge 0 ]
pcp-5.2.2/qa/750-125- then
##############################################
pcp-5.2.2/qa/751-6-#
pcp-5.2.2/qa/751:7:seq=`basename $0`
pcp-5.2.2/qa/751-8-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/752-4-
pcp-5.2.2/qa/752:5:seq=`basename $0`
pcp-5.2.2/qa/752-6-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/752-58-echo "TODAY=$TODAY" >>$seq.full
pcp-5.2.2/qa/752:59:today=`echo "$TODAY" | tr '[A-Z]' '[a-z]'`
pcp-5.2.2/qa/752-60-echo "today=$today" >>$seq.full
pcp-5.2.2/qa/752:61:t1=`date -d "next $today"`
pcp-5.2.2/qa/752-62-echo "t1=$t1" >>$seq.full
pcp-5.2.2/qa/752:63:t2=`date -d "$today week"`
pcp-5.2.2/qa/752-64-echo "t2=$t2" >>$seq.full
##############################################
pcp-5.2.2/qa/753-8-
pcp-5.2.2/qa/753:9:seq=`basename $0`
pcp-5.2.2/qa/753-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/754-7-
pcp-5.2.2/qa/754:8:seq=`basename $0`
pcp-5.2.2/qa/754-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/754-12-
pcp-5.2.2/qa/754:13:python_path=`which $python`
pcp-5.2.2/qa/754-14-pmda_path="$PCP_PMDAS_DIR/unbound"
##############################################
pcp-5.2.2/qa/755-7-
pcp-5.2.2/qa/755:8:seq=`basename $0`
pcp-5.2.2/qa/755-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/756-10-
pcp-5.2.2/qa/756:11:seq=`basename $0`
pcp-5.2.2/qa/756-12-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/756-43- # at least one line diverted
pcp-5.2.2/qa/756:44: system("LC_COLLATE=POSIX sort '$tmp.sort'." ndiv)
pcp-5.2.2/qa/756-45- }
##############################################
pcp-5.2.2/qa/757-7-
pcp-5.2.2/qa/757:8:seq=`basename $0`
pcp-5.2.2/qa/757-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/758-7-
pcp-5.2.2/qa/758:8:seq=`basename $0`
pcp-5.2.2/qa/758-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/759-7-
pcp-5.2.2/qa/759:8:seq=`basename $0`
pcp-5.2.2/qa/759-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/760-11-
pcp-5.2.2/qa/760:12:seq=`basename $0`
pcp-5.2.2/qa/760-13-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/761-9-
pcp-5.2.2/qa/761:10:seq=`basename $0`
pcp-5.2.2/qa/761-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/761-116-
pcp-5.2.2/qa/761:117:tarballs=`echo $here/linux/containers-*.tgz | LC_COLLATE=POSIX sort`
pcp-5.2.2/qa/761-118-for tgz in $tarballs
##############################################
pcp-5.2.2/qa/761-123- $sudo tar xzf $tgz
pcp-5.2.2/qa/761:124: base=`basename $tgz`
pcp-5.2.2/qa/761-125-
##############################################
pcp-5.2.2/qa/762-7-
pcp-5.2.2/qa/762:8:seq=`basename $0`
pcp-5.2.2/qa/762-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/763-8-
pcp-5.2.2/qa/763:9:seq=`basename $0`
pcp-5.2.2/qa/763-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/763-47- -[0-9]*)
pcp-5.2.2/qa/763:48: echo "=== start delay `expr -1 \* $start` sec, no connect_pmcd() ===" | tee -a $here/$seq.full
pcp-5.2.2/qa/763-49- ;;
##############################################
pcp-5.2.2/qa/764-7-
pcp-5.2.2/qa/764:8:seq=`basename $0`
pcp-5.2.2/qa/764-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/765-7-
pcp-5.2.2/qa/765:8:seq=`basename $0`
pcp-5.2.2/qa/765-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/766-8-
pcp-5.2.2/qa/766:9:seq=`basename $0`
pcp-5.2.2/qa/766-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/766-87-do
pcp-5.2.2/qa/766:88: if `host $addr 2>&1 | grep NXDOMAIN >/dev/null`
pcp-5.2.2/qa/766-89- then
##############################################
pcp-5.2.2/qa/766-99-
pcp-5.2.2/qa/766:100:addr=`cat $tmp.tmp`
pcp-5.2.2/qa/766-101-[ -z "$addr" ] && _notrun "no active inet interfaces with DNS resolution"
##############################################
pcp-5.2.2/qa/767-7-
pcp-5.2.2/qa/767:8:seq=`basename $0`
pcp-5.2.2/qa/767-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/768-12-
pcp-5.2.2/qa/768:13:seq=`basename $0`
pcp-5.2.2/qa/768-14-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/769-8-
pcp-5.2.2/qa/769:9:seq=`basename $0`
pcp-5.2.2/qa/769-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/770-9-
pcp-5.2.2/qa/770:10:seq=`basename $0`
pcp-5.2.2/qa/770-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/771-7-
pcp-5.2.2/qa/771:8:seq=`basename $0`
pcp-5.2.2/qa/771-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/772-7-
pcp-5.2.2/qa/772:8:seq=`basename $0`
pcp-5.2.2/qa/772-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/773-7-
pcp-5.2.2/qa/773:8:seq=`basename $0`
pcp-5.2.2/qa/773-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/774-7-
pcp-5.2.2/qa/774:8:seq=`basename $0`
pcp-5.2.2/qa/774-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/775-7-
pcp-5.2.2/qa/775:8:seq=`basename $0`
pcp-5.2.2/qa/775-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/776-8-
pcp-5.2.2/qa/776:9:seq=`basename $0`
pcp-5.2.2/qa/776-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/777-7-
pcp-5.2.2/qa/777:8:seq=`basename $0`
pcp-5.2.2/qa/777-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/778-8-
pcp-5.2.2/qa/778:9:seq=`basename $0`
pcp-5.2.2/qa/778-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/778-139- fi
pcp-5.2.2/qa/778:140: nlines=`wc -l <$tmp.val.pcp | sed -e 's/ //g'`
pcp-5.2.2/qa/778-141- if [ "$nlines" != 1 ]
##############################################
pcp-5.2.2/qa/779-7-
pcp-5.2.2/qa/779:8:seq=`basename $0`
pcp-5.2.2/qa/779-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/780-7-
pcp-5.2.2/qa/780:8:seq=`basename $0`
pcp-5.2.2/qa/780-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/781-7-
pcp-5.2.2/qa/781:8:seq=`basename $0`
pcp-5.2.2/qa/781-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/783-6-#
pcp-5.2.2/qa/783:7:seq=`basename $0`
pcp-5.2.2/qa/783-8-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/784-7-
pcp-5.2.2/qa/784:8:seq=`basename $0`
pcp-5.2.2/qa/784-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/784-12-
pcp-5.2.2/qa/784:13:python_path=`which $python`
pcp-5.2.2/qa/784-14-pmda_path="$PCP_PMDAS_DIR/mic"
##############################################
pcp-5.2.2/qa/785-7-
pcp-5.2.2/qa/785:8:seq=`basename $0`
pcp-5.2.2/qa/785-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/786-7-
pcp-5.2.2/qa/786:8:seq=`basename $0`
pcp-5.2.2/qa/786-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/787-7-
pcp-5.2.2/qa/787:8:seq=`basename $0`
pcp-5.2.2/qa/787-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/787-36-pmdumplog -xz archives/bug-1044 >$tmp.tmp
pcp-5.2.2/qa/787:37:echo "log records: `egrep '^([A-Z][a-z][a-z] )|([0-2][0-9]:)' <$tmp.tmp | wc -l | sed -e 's/ //g'`"
pcp-5.2.2/qa/787-38-
##############################################
pcp-5.2.2/qa/787-57- pmval -z $opt -t 1hr -A 1hr -a archives/bug-1044 $metric 2>$tmp.err
pcp-5.2.2/qa/787:58: echo "log reads: `_summary <$tmp.err`"
pcp-5.2.2/qa/787-59- $full && cat $tmp.err >>$seq.full
##############################################
pcp-5.2.2/qa/787-66-
pcp-5.2.2/qa/787:67: echo "`echo $metric | sed -e 's/\./_/g'` = $metric;" >>$tmp.pmie
pcp-5.2.2/qa/787-68-done
##############################################
pcp-5.2.2/qa/787-75-| _filter
pcp-5.2.2/qa/787:76:echo "log reads: `_summary <$tmp.err`"
pcp-5.2.2/qa/787-77-$full && cat $tmp.err >>$seq.full
##############################################
pcp-5.2.2/qa/787-81-pmie -z -a archives/bug-1044 -c $tmp.pmie -t 1hr -A 1hr -v -Dlog 2>$tmp.err
pcp-5.2.2/qa/787:82:echo "log reads: `_summary <$tmp.err`"
pcp-5.2.2/qa/787-83-
##############################################
pcp-5.2.2/qa/788-7-
pcp-5.2.2/qa/788:8:seq=`basename $0`
pcp-5.2.2/qa/788-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/789-7-
pcp-5.2.2/qa/789:8:seq=`basename $0`
pcp-5.2.2/qa/789-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/790-7-
pcp-5.2.2/qa/790:8:seq=`basename $0`
pcp-5.2.2/qa/790-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/791-7-
pcp-5.2.2/qa/791:8:seq=`basename $0`
pcp-5.2.2/qa/791-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/792-7-
pcp-5.2.2/qa/792:8:seq=`basename $0`
pcp-5.2.2/qa/792-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/793-8-
pcp-5.2.2/qa/793:9:seq=`basename $0`
pcp-5.2.2/qa/793-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/793-101- #
pcp-5.2.2/qa/793:102: pid=`grep -l "/$x/" $PCP_TMP_DIR/pmlogger/[0-9]* | sed -e 's/.*pmlogger.//'`
pcp-5.2.2/qa/793-103- if [ -n "$pid" ]
##############################################
pcp-5.2.2/qa/793-109- fi
pcp-5.2.2/qa/793:110: z=`expr $z + 1`
pcp-5.2.2/qa/793-111- sleep 1
##############################################
pcp-5.2.2/qa/793-169- ls -l $tmp/$x >>$here/$seq.full
pcp-5.2.2/qa/793:170: echo `ls $tmp/$x | grep "\.meta" | wc -l | sed -e 's/ //g'` archives in TMP/$x
pcp-5.2.2/qa/793-171-done
##############################################
pcp-5.2.2/qa/793-182- ls -l $tmp/$x >>$here/$seq.full
pcp-5.2.2/qa/793:183: echo `ls $tmp/$x | grep "\.meta" | wc -l | sed -e 's/ //g'` archives in TMP/$x
pcp-5.2.2/qa/793-184-done
##############################################
pcp-5.2.2/qa/793-196- ls -l $tmp/$x >>$here/$seq.full
pcp-5.2.2/qa/793:197: echo `ls $tmp/$x | grep "\.meta" | wc -l | sed -e 's/ //g'` archives in TMP/$x
pcp-5.2.2/qa/793-198-done
##############################################
pcp-5.2.2/qa/794-7-
pcp-5.2.2/qa/794:8:seq=`basename $0`
pcp-5.2.2/qa/794-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/794-60-
pcp-5.2.2/qa/794:61:container=`$docker run -d busybox sleep 15`
pcp-5.2.2/qa/794-62-echo "== container: $container" >> $seq.full
##############################################
pcp-5.2.2/qa/794-67-pmprobe --values pmcd.hostname > $tmp.host
pcp-5.2.2/qa/794:68:eval container_hostname=`awk '{ print $3 }' $tmp.chost`
pcp-5.2.2/qa/794:69:eval localhost_hostname=`awk '{ print $3 }' $tmp.host`
pcp-5.2.2/qa/794-70-
##############################################
pcp-5.2.2/qa/795-7-
pcp-5.2.2/qa/795:8:seq=`basename $0`
pcp-5.2.2/qa/795-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/796-7-
pcp-5.2.2/qa/796:8:seq=`basename $0`
pcp-5.2.2/qa/796-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/797-7-
pcp-5.2.2/qa/797:8:seq=`basename $0`
pcp-5.2.2/qa/797-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/798-7-
pcp-5.2.2/qa/798:8:seq=`basename $0`
pcp-5.2.2/qa/798-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/798-19-rm -f $seq.out
pcp-5.2.2/qa/798:20:wordsize=`$python -c 'import ctypes; print(ctypes.sizeof(ctypes.c_long))'`
pcp-5.2.2/qa/798-21-if [ $wordsize -eq 4 ]
##############################################
pcp-5.2.2/qa/798-30-fi
pcp-5.2.2/qa/798:31:python_path=`which $python`
pcp-5.2.2/qa/798-32-
##############################################
pcp-5.2.2/qa/798-300- export NFSCLIENT_MOUNTSTATS_PATH="$file"
pcp-5.2.2/qa/798:301: echo === Test case: `basename $file`
pcp-5.2.2/qa/798-302- $sudo rm -f nfsclient.log $PCP_VAR_DIR/config/pmda/$domain.0
##############################################
pcp-5.2.2/qa/798-313- export NFSCLIENT_MOUNTSTATS_PATH="$file"
pcp-5.2.2/qa/798:314: echo === Test case: `basename $file`
pcp-5.2.2/qa/798-315- $sudo rm -f nfsclient.log $PCP_VAR_DIR/config/pmda/$domain.0
##############################################
pcp-5.2.2/qa/798-326- export NFSCLIENT_MOUNTSTATS_PATH="$file"
pcp-5.2.2/qa/798:327: echo === Test case: `basename $file`
pcp-5.2.2/qa/798-328- $sudo rm -f nfsclient.log $PCP_VAR_DIR/config/pmda/$domain.0
##############################################
pcp-5.2.2/qa/798-339- export NFSCLIENT_MOUNTSTATS_PATH="$file"
pcp-5.2.2/qa/798:340: echo === Test case: `basename $file`
pcp-5.2.2/qa/798-341- $sudo rm -f nfsclient.log $PCP_VAR_DIR/config/pmda/$domain.0
##############################################
pcp-5.2.2/qa/799-7-
pcp-5.2.2/qa/799:8:seq=`basename $0`
pcp-5.2.2/qa/799-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/800-7-
pcp-5.2.2/qa/800:8:seq=`basename $0`
pcp-5.2.2/qa/800-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/801-8-
pcp-5.2.2/qa/801:9:seq=`basename $0`
pcp-5.2.2/qa/801-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/802-7-
pcp-5.2.2/qa/802:8:seq=`basename $0`
pcp-5.2.2/qa/802-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/803-7-
pcp-5.2.2/qa/803:8:seq=`basename $0`
pcp-5.2.2/qa/803-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/804-7-
pcp-5.2.2/qa/804:8:seq=`basename $0`
pcp-5.2.2/qa/804-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/805-7-
pcp-5.2.2/qa/805:8:seq=`basename $0`
pcp-5.2.2/qa/805-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/805-116- pmsleep 1.25
pcp-5.2.2/qa/805:117: logfile=`basename $file`
pcp-5.2.2/qa/805-118- gunzip < $file > $tmp.logfile
##############################################
pcp-5.2.2/qa/806-7-
pcp-5.2.2/qa/806:8:seq=`basename $0`
pcp-5.2.2/qa/806-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/807-7-
pcp-5.2.2/qa/807:8:seq=`basename $0`
pcp-5.2.2/qa/807-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/807-19-#
pcp-5.2.2/qa/807:20:[ "`echo foobar | awk '{printf "%3.3s\n",$1}'`" = foo ] || _notrun 'your version of awk is broken'
pcp-5.2.2/qa/807-21-
##############################################
pcp-5.2.2/qa/808-8-
pcp-5.2.2/qa/808:9:seq=`basename $0`
pcp-5.2.2/qa/808-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/810-7-
pcp-5.2.2/qa/810:8:seq=`basename $0`
pcp-5.2.2/qa/810-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/810-26-{
pcp-5.2.2/qa/810:27: tmpx=`echo $tmp`
pcp-5.2.2/qa/810-28- sed -e 's/^Archive:.* Host:/ARCHIVE: Host:/' \
##############################################
pcp-5.2.2/qa/811-7-
pcp-5.2.2/qa/811:8:seq=`basename $0`
pcp-5.2.2/qa/811-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/812-7-
pcp-5.2.2/qa/812:8:seq=`basename $0`
pcp-5.2.2/qa/812-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/813-7-
pcp-5.2.2/qa/813:8:seq=`basename $0`
pcp-5.2.2/qa/813-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/814-7-
pcp-5.2.2/qa/814:8:seq=`basename $0`
pcp-5.2.2/qa/814-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/814-24-{
pcp-5.2.2/qa/814:25: tmpx=`echo $tmp`
pcp-5.2.2/qa/814-26- sed -e 's/^Archive:.* Host:/ARCHIVE: Host:/' \
##############################################
pcp-5.2.2/qa/815-7-
pcp-5.2.2/qa/815:8:seq=`basename $0`
pcp-5.2.2/qa/815-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/816-7-
pcp-5.2.2/qa/816:8:seq=`basename $0`
pcp-5.2.2/qa/816-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/817-7-
pcp-5.2.2/qa/817:8:seq=`basename $0`
pcp-5.2.2/qa/817-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/817-24-{
pcp-5.2.2/qa/817:25: tmpx=`echo $tmp`
pcp-5.2.2/qa/817-26- sed -e 's/^Archive:.* Host:/ARCHIVE: Host:/' \
##############################################
pcp-5.2.2/qa/818-7-
pcp-5.2.2/qa/818:8:seq=`basename $0`
pcp-5.2.2/qa/818-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/818-24-{
pcp-5.2.2/qa/818:25: tmpx=`echo $tmp`
pcp-5.2.2/qa/818-26- sed -e 's/^archive:.*/archive: ARCHIVE/' \
##############################################
pcp-5.2.2/qa/819-7-
pcp-5.2.2/qa/819:8:seq=`basename $0`
pcp-5.2.2/qa/819-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/820-7-
pcp-5.2.2/qa/820:8:seq=`basename $0`
pcp-5.2.2/qa/820-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/821-7-
pcp-5.2.2/qa/821:8:seq=`basename $0`
pcp-5.2.2/qa/821-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/821-62-
pcp-5.2.2/qa/821:63:mem_metrics=`pminfo $local mem | LC_COLLATE=POSIX sort`
pcp-5.2.2/qa/821:64:slab_metrics=`pminfo $local mem.slabinfo | LC_COLLATE=POSIX sort`
pcp-5.2.2/qa/821:65:buddy_metrics=`pminfo $local mem.buddyinfo | LC_COLLATE=POSIX sort`
pcp-5.2.2/qa/821:66:zone_metrics=`pminfo $local mem.zoneinfo | LC_COLLATE=POSIX sort`
pcp-5.2.2/qa/821-67-
##############################################
pcp-5.2.2/qa/821-79- tar xzf $tgz
pcp-5.2.2/qa/821:80: base=`basename $tgz`
pcp-5.2.2/qa/821-81-
##############################################
pcp-5.2.2/qa/822-13-
pcp-5.2.2/qa/822:14:seq=`basename $0`
pcp-5.2.2/qa/822-15-
##############################################
pcp-5.2.2/qa/823-12-
pcp-5.2.2/qa/823:13:seq=`basename $0`
pcp-5.2.2/qa/823-14-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/823-81-echo "Enabling sample PMDA tracing" | tee -a $seq.full
pcp-5.2.2/qa/823:82:authdbg=`pmdbg -l -o | grep DBG_TRACE_AUTH | awk '{ print $2 }'`
pcp-5.2.2/qa/823-83-echo "authdbg=$authdbg" >>$seq.full
##############################################
pcp-5.2.2/qa/824-8-
pcp-5.2.2/qa/824:9:seq=`basename $0`
pcp-5.2.2/qa/824-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/825-12-
pcp-5.2.2/qa/825:13:seq=`basename $0`
pcp-5.2.2/qa/825-14-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/826-7-
pcp-5.2.2/qa/826:8:seq=`basename $0`
pcp-5.2.2/qa/826-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/827-12-
pcp-5.2.2/qa/827:13:seq=`basename $0`
pcp-5.2.2/qa/827-14-
##############################################
pcp-5.2.2/qa/828-9-
pcp-5.2.2/qa/828:10:seq=`basename $0`
pcp-5.2.2/qa/828-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/829-7-
pcp-5.2.2/qa/829:8:seq=`basename $0`
pcp-5.2.2/qa/829-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/830-7-
pcp-5.2.2/qa/830:8:seq=`basename $0`
pcp-5.2.2/qa/830-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/831-12-
pcp-5.2.2/qa/831:13:seq=`basename $0`
pcp-5.2.2/qa/831-14-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/831-43-echo "Enabling sample PMDA tracing"
pcp-5.2.2/qa/831:44:authdbg=`pmdbg -o -l | grep DBG_TRACE_AUTH | awk '{ print $2 }'`
pcp-5.2.2/qa/831-45-pmstore sample.control $authdbg
##############################################
pcp-5.2.2/qa/832-7-
pcp-5.2.2/qa/832:8:seq=`basename $0`
pcp-5.2.2/qa/832-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/833-15-
pcp-5.2.2/qa/833:16:seq=`basename $0`
pcp-5.2.2/qa/833-17-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/834-7-
pcp-5.2.2/qa/834:8:seq=`basename $0`
pcp-5.2.2/qa/834-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/835-9-
pcp-5.2.2/qa/835:10:seq=`basename $0`
pcp-5.2.2/qa/835-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/836-7-
pcp-5.2.2/qa/836:8:seq=`basename $0`
pcp-5.2.2/qa/836-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/837-7-
pcp-5.2.2/qa/837:8:seq=`basename $0`
pcp-5.2.2/qa/837-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/837-45-# store to enable verbose attribute diagnostics
pcp-5.2.2/qa/837:46:authdbg=`pmdbg -o -l | grep DBG_TRACE_AUTH | awk '{ print $2 }'`
pcp-5.2.2/qa/837-47-pmstore sample.control $authdbg
##############################################
pcp-5.2.2/qa/838-7-
pcp-5.2.2/qa/838:8:seq=`basename $0`
pcp-5.2.2/qa/838-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/839-7-
pcp-5.2.2/qa/839:8:seq=`basename $0`
pcp-5.2.2/qa/839-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/840-7-
pcp-5.2.2/qa/840:8:seq=`basename $0`
pcp-5.2.2/qa/840-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/841-8-
pcp-5.2.2/qa/841:9:seq=`basename $0`
pcp-5.2.2/qa/841-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/841-45- -[0-9]*)
pcp-5.2.2/qa/841:46: echo "=== start delay `expr \( -1 \) \* $start` sec, no connect_pmcd() ===" | tee -a $here/$seq.full
pcp-5.2.2/qa/841-47- ;;
##############################################
pcp-5.2.2/qa/842-7-
pcp-5.2.2/qa/842:8:seq=`basename $0`
pcp-5.2.2/qa/842-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/842-40- echo
pcp-5.2.2/qa/842:41: precision=`expr $precision + 1`
pcp-5.2.2/qa/842-42-done
##############################################
pcp-5.2.2/qa/842-64- done
pcp-5.2.2/qa/842:65: t=`expr $t + 1`
pcp-5.2.2/qa/842-66-done
##############################################
pcp-5.2.2/qa/843-7-
pcp-5.2.2/qa/843:8:seq=`basename $0`
pcp-5.2.2/qa/843-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/844-8-
pcp-5.2.2/qa/844:9:seq=`basename $0`
pcp-5.2.2/qa/844-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/845-7-
pcp-5.2.2/qa/845:8:seq=`basename $0`
pcp-5.2.2/qa/845-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/845-78-then
pcp-5.2.2/qa/845:79: rootdev=`pminfo -f mounts.device | grep '"/"' | awk '{ print $6 }'`
pcp-5.2.2/qa/845-80- echo "rootdev=$rootdev" >>$here/$seq.full
##############################################
pcp-5.2.2/qa/846-6-
pcp-5.2.2/qa/846:7:seq=`basename $0`
pcp-5.2.2/qa/846-8-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/847-7-
pcp-5.2.2/qa/847:8:seq=`basename $0`
pcp-5.2.2/qa/847-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/848-7-
pcp-5.2.2/qa/848:8:seq=`basename $0`
pcp-5.2.2/qa/848-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/849-7-
pcp-5.2.2/qa/849:8:seq=`basename $0`
pcp-5.2.2/qa/849-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/849-104- echo | tee -a $seq.full
pcp-5.2.2/qa/849:105: echo "Test: `echo $x | sed -e "s;$tmp.pmie.;;"` [expect: `sed -n -e '/^\/\/expect /s///p' <$x`]" | tee -a $seq.full
pcp-5.2.2/qa/849-106- cat $x | tee -a $seq.full >>$seq.full
pcp-5.2.2/qa/849:107: pmie -c $x `sed -n -e '/^\/\/args /s///p' <$x` >$tmp.out 2>$tmp.err
pcp-5.2.2/qa/849-108- echo "=== pmie output ===" >>$seq.full
##############################################
pcp-5.2.2/qa/851-13-
pcp-5.2.2/qa/851:14:seq=`basename $0`
pcp-5.2.2/qa/851-15-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/851-26-do
pcp-5.2.2/qa/851:27: numval=`pmprobe $metric | $PCP_AWK_PROG '{ print $2 }'`
pcp-5.2.2/qa/851-28- case "$numval"
##############################################
pcp-5.2.2/qa/852-7-
pcp-5.2.2/qa/852:8:seq=`basename $0`
pcp-5.2.2/qa/852-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/852-46- tar xzf $tgz
pcp-5.2.2/qa/852:47: base=`basename $tgz`
pcp-5.2.2/qa/852-48-
##############################################
pcp-5.2.2/qa/853-7-
pcp-5.2.2/qa/853:8:seq=`basename $0`
pcp-5.2.2/qa/853-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/853-85-echo "Check lines in and out ..."
pcp-5.2.2/qa/853:86:echo "in: `wc -l <$tmp.in2 | sed -e 's/ //g'` + `wc -l <$tmp.inc | sed -e 's/ //g'`"
pcp-5.2.2/qa/853:87:echo "out: `pmcpp -sr <$tmp.in2 | wc -l | sed -e 's/ //g'`"
pcp-5.2.2/qa/853-88-echo "----------------------"
##############################################
pcp-5.2.2/qa/854-7-
pcp-5.2.2/qa/854:8:seq=`basename $0`
pcp-5.2.2/qa/854-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/854-96-#
pcp-5.2.2/qa/854:97:archive=$LOGGING_DIR/$LOCALHOST/`pmafm $LOGGING_DIR/$LOCALHOST/Latest list | sed -n -e '/ 1]/s/.* //p'`
pcp-5.2.2/qa/854-98-echo "archive=$archive" >>$seq.full
##############################################
pcp-5.2.2/qa/855-7-
pcp-5.2.2/qa/855:8:seq=`basename $0`
pcp-5.2.2/qa/855-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/856-7-
pcp-5.2.2/qa/856:8:seq=`basename $0`
pcp-5.2.2/qa/856-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/857-7-
pcp-5.2.2/qa/857:8:seq=`basename $0`
pcp-5.2.2/qa/857-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/857-51-
pcp-5.2.2/qa/857:52: ncpus=`echo $machine | sed -e 's/cpu.*//g'`
pcp-5.2.2/qa/857-53- export LINUX_STATSPATH=$tmp.root
##############################################
pcp-5.2.2/qa/858-7-
pcp-5.2.2/qa/858:8:seq=`basename $0`
pcp-5.2.2/qa/858-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/859-7-
pcp-5.2.2/qa/859:8:seq=`basename $0`
pcp-5.2.2/qa/859-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/860-7-
pcp-5.2.2/qa/860:8:seq=`basename $0`
pcp-5.2.2/qa/860-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/861-8-
pcp-5.2.2/qa/861:9:seq=`basename $0`
pcp-5.2.2/qa/861-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/862-7-
pcp-5.2.2/qa/862:8:seq=`basename $0`
pcp-5.2.2/qa/862-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/863-8-
pcp-5.2.2/qa/863:9:seq=`basename $0`
pcp-5.2.2/qa/863-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/864-7-
pcp-5.2.2/qa/864:8:seq=`basename $0`
pcp-5.2.2/qa/864-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/865-7-
pcp-5.2.2/qa/865:8:seq=`basename $0`
pcp-5.2.2/qa/865-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/866-7-
pcp-5.2.2/qa/866:8:seq=`basename $0`
pcp-5.2.2/qa/866-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/867-7-
pcp-5.2.2/qa/867:8:seq=`basename $0`
pcp-5.2.2/qa/867-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/868-7-
pcp-5.2.2/qa/868:8:seq=`basename $0`
pcp-5.2.2/qa/868-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/869-7-
pcp-5.2.2/qa/869:8:seq=`basename $0`
pcp-5.2.2/qa/869-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/870-12-
pcp-5.2.2/qa/870:13:seq=`basename $0`
pcp-5.2.2/qa/870-14-
##############################################
pcp-5.2.2/qa/870-54- # at least one is running
pcp-5.2.2/qa/870:55: for pid in `cat $tmp.pmids`
pcp-5.2.2/qa/870-56- do
##############################################
pcp-5.2.2/qa/870-69- then
pcp-5.2.2/qa/870:70: check_pid=`ls -l $PCP_TMP_DIR/pmlogger/primary | sed -e 's/.*\///'`
pcp-5.2.2/qa/870-71- if [ "$check_pid" = "$pid" ]
##############################################
pcp-5.2.2/qa/870-117- then
pcp-5.2.2/qa/870:118: check_pid=`ls -l $PCP_RUN_DIR/pmlogger.primary.socket | sed -e 's/.*\///' -e 's/pmlogger\.//' -e 's/\.socket//'`
pcp-5.2.2/qa/870-119- if [ "$check_pid" = "$pid" ]
##############################################
pcp-5.2.2/qa/870-165- then
pcp-5.2.2/qa/870:166: for file in `cd $PCP_TMP_DIR/pmlogger; ls`
pcp-5.2.2/qa/870-167- do
##############################################
pcp-5.2.2/qa/870-170- primary)
pcp-5.2.2/qa/870:171: pid=`ls -l $PCP_TMP_DIR/pmlogger/primary | sed -e 's/.*\///'`
pcp-5.2.2/qa/870-172- ;;
##############################################
pcp-5.2.2/qa/870-214- then
pcp-5.2.2/qa/870:215: for file in `cd $PCP_RUN_DIR; ls`
pcp-5.2.2/qa/870-216- do
##############################################
pcp-5.2.2/qa/870-220- pmlogger.primary.socket)
pcp-5.2.2/qa/870:221: pid=`ls -l $PCP_RUN_DIR/pmlogger.primary.socket | sed -e 's/.*\///' -e 's/pmlogger\.//' -e 's/\.socket//'`
pcp-5.2.2/qa/870-222- ;;
pcp-5.2.2/qa/870-223- pmlogger.pid)
pcp-5.2.2/qa/870:224: pid=`cat $PCP_RUN_DIR/$file`
pcp-5.2.2/qa/870-225- ;;
pcp-5.2.2/qa/870-226- pmlogger.*)
pcp-5.2.2/qa/870:227: pid=`echo $file | sed -e 's/pmlogger\.//' -e 's/\.socket//'`
pcp-5.2.2/qa/870-228- ;;
##############################################
pcp-5.2.2/qa/870-282- #
pcp-5.2.2/qa/870:283: num_primary=`grep 'pmlogger .*-P ' <$tmp.ps.out | wc -l | sed -e 's/ //g'`
pcp-5.2.2/qa/870-284- if [ "$num_primary" -gt 1 ]
##############################################
pcp-5.2.2/qa/871-9-
pcp-5.2.2/qa/871:10:seq=`basename $0`
pcp-5.2.2/qa/871-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/872-7-
pcp-5.2.2/qa/872:8:seq=`basename $0`
pcp-5.2.2/qa/872-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/872-25-pmda=$PCP_PMDAS_DIR/linux/pmda_linux.so,linux_init
pcp-5.2.2/qa/872:26:files=`echo $here/linux/procnet-snmp-* | LC_COLLATE=POSIX sort`
pcp-5.2.2/qa/872:27:files6=`echo $here/linux/procnet-snmp6-* | LC_COLLATE=POSIX sort`
pcp-5.2.2/qa/872-28-
##############################################
pcp-5.2.2/qa/872-36-done
pcp-5.2.2/qa/872:37:metrics=`pminfo $network | LC_COLLATE=POSIX sort`
pcp-5.2.2/qa/872:38:metrics6=`pminfo $network6 | LC_COLLATE=POSIX sort`
pcp-5.2.2/qa/872-39-echo
##############################################
pcp-5.2.2/qa/872-44- mkdir -p $root/proc/net || _fail "root in use when processing $file"
pcp-5.2.2/qa/872:45: base=`basename $file`
pcp-5.2.2/qa/872-46- cp $file $root/proc/net/snmp
##############################################
pcp-5.2.2/qa/872-57- mkdir -p $root/proc/net || _fail "root in use when processing $file"
pcp-5.2.2/qa/872:58: base=`basename $file`
pcp-5.2.2/qa/872-59- cp $file $root/proc/net/snmp6
##############################################
pcp-5.2.2/qa/873-8-
pcp-5.2.2/qa/873:9:seq=`basename $0`
pcp-5.2.2/qa/873-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/874-7-
pcp-5.2.2/qa/874:8:seq=`basename $0`
pcp-5.2.2/qa/874-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/875-7-
pcp-5.2.2/qa/875:8:seq=`basename $0`
pcp-5.2.2/qa/875-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/876-7-
pcp-5.2.2/qa/876:8:seq=`basename $0`
pcp-5.2.2/qa/876-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/876-22-else
pcp-5.2.2/qa/876:23: msg=`cat $tmp.out`
pcp-5.2.2/qa/876-24- rm -f $tmp.out
##############################################
pcp-5.2.2/qa/876-32-version=`xfs_quota -V | sed -e 's/.* //'`
pcp-5.2.2/qa/876:33:version_maj=`echo $version | sed -e 's/\..*//'`
pcp-5.2.2/qa/876-34-[ "$version_maj" -ge 4 ] || _notrun "Need at least version 4.0.0 (not $version) for xfs_quota"
pcp-5.2.2/qa/876-35-# check for any loopback devices, cowardly abort this test if any exist
pcp-5.2.2/qa/876:36:loopcount=`$sudo losetup -a | wc -l`
pcp-5.2.2/qa/876-37-[ $loopcount -eq 0 ] || _notrun "System has loop devices already, bailing"
##############################################
pcp-5.2.2/qa/876-53- do
pcp-5.2.2/qa/876:54: loopcount=`$sudo losetup -a | wc -l`
pcp-5.2.2/qa/876-55- [ $loopcount -eq 0 ] && break
##############################################
pcp-5.2.2/qa/877-7-
pcp-5.2.2/qa/877:8:seq=`basename $0`
pcp-5.2.2/qa/877-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/878-7-
pcp-5.2.2/qa/878:8:seq=`basename $0`
pcp-5.2.2/qa/878-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/879-7-
pcp-5.2.2/qa/879:8:seq=`basename $0`
pcp-5.2.2/qa/879-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/880-7-
pcp-5.2.2/qa/880:8:seq=`basename $0`
pcp-5.2.2/qa/880-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/881-7-
pcp-5.2.2/qa/881:8:seq=`basename $0`
pcp-5.2.2/qa/881-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/881-29-# real QA test starts here
pcp-5.2.2/qa/881:30:pmcdpid=`cat $PCP_RUN_DIR/pmcd.pid`
pcp-5.2.2/qa/881-31-checked=`_get_pids_by_name pmcd`
##############################################
pcp-5.2.2/qa/882-7-
pcp-5.2.2/qa/882:8:seq=`basename $0`
pcp-5.2.2/qa/882-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/883-7-
pcp-5.2.2/qa/883:8:seq=`basename $0`
pcp-5.2.2/qa/883-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/884-6-
pcp-5.2.2/qa/884:7:seq=`basename $0`
pcp-5.2.2/qa/884-8-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/885-7-
pcp-5.2.2/qa/885:8:seq=`basename $0`
pcp-5.2.2/qa/885-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/885-25-pmda=$PCP_PMDAS_DIR/linux/pmda_linux.so,linux_init
pcp-5.2.2/qa/885:26:files=`echo $here/linux/cpuinfo-* | LC_COLLATE=POSIX sort`
pcp-5.2.2/qa/885-27-metrics=`pminfo hinv.cpu | grep -v hinv.cpu.online`
##############################################
pcp-5.2.2/qa/885-34- cp $file $root/proc/cpuinfo
pcp-5.2.2/qa/885:35: base=`basename $file`
pcp-5.2.2/qa/885:36: ncpu=`echo $base | sed -e 's/.*-\([0-9][0-9]*\)cpu-.*/\1/'`
pcp-5.2.2/qa/885-37- _make_proc_stat $root/proc/stat $ncpu
##############################################
pcp-5.2.2/qa/886-7-
pcp-5.2.2/qa/886:8:seq=`basename $0`
pcp-5.2.2/qa/886-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/886-40- target=$2
pcp-5.2.2/qa/886:41: suffix=`echo "$file" | sed 's/.*\.//'`
pcp-5.2.2/qa/886-42-
##############################################
pcp-5.2.2/qa/886-57-pmda=$PCP_PMDAS_DIR/linux/pmda_linux.so,linux_init
pcp-5.2.2/qa/886:58:interrupts=`echo $here/linux/interrupts-* | LC_COLLATE=POSIX sort`
pcp-5.2.2/qa/886:59:softirqs=`echo $here/linux/softirqs-* | LC_COLLATE=POSIX sort`
pcp-5.2.2/qa/886-60-
##############################################
pcp-5.2.2/qa/886-77- _unpack $file $root/proc/interrupts
pcp-5.2.2/qa/886:78: base=`basename $file`
pcp-5.2.2/qa/886:79: ncpu=`echo $base | sed -e 's/.*-\([0-9][0-9]*\)cpu-.*/\1/'`
pcp-5.2.2/qa/886-80- _make_proc_stat $root/proc/stat $ncpu
##############################################
pcp-5.2.2/qa/886-97- _unpack $file $root/proc/softirqs
pcp-5.2.2/qa/886:98: base=`basename $file`
pcp-5.2.2/qa/886:99: ncpu=`echo $base | sed -e 's/.*-\([0-9][0-9]*\)cpu-.*/\1/'`
pcp-5.2.2/qa/886-100- _make_proc_stat $root/proc/stat $ncpu
##############################################
pcp-5.2.2/qa/887-7-
pcp-5.2.2/qa/887:8:seq=`basename $0`
pcp-5.2.2/qa/887-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/887-24-{
pcp-5.2.2/qa/887:25: tmpx=`echo $tmp`
pcp-5.2.2/qa/887-26- sed -e 's/^Archive:.* Host:/ARCHIVE: Host:/' \
##############################################
pcp-5.2.2/qa/888-11-
pcp-5.2.2/qa/888:12:seq=`basename $0`
pcp-5.2.2/qa/888-13-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/889-7-
pcp-5.2.2/qa/889:8:seq=`basename $0`
pcp-5.2.2/qa/889-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/889-43- tar xf $tgz
pcp-5.2.2/qa/889:44: base=`basename $tgz`
pcp-5.2.2/qa/889-45-
##############################################
pcp-5.2.2/qa/890-8-
pcp-5.2.2/qa/890:9:seq=`basename $0`
pcp-5.2.2/qa/890-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/891-7-
pcp-5.2.2/qa/891:8:seq=`basename $0`
pcp-5.2.2/qa/891-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/892-7-
pcp-5.2.2/qa/892:8:seq=`basename $0`
pcp-5.2.2/qa/892-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/892-22-_host_to_ipv6addrs $host | tee -a $seq.full >$tmp.tmp
pcp-5.2.2/qa/892:23:addr=`head -1 $tmp.tmp`
pcp-5.2.2/qa/892-24-[ -z "$addr" ] && _notrun "Cannot translate hostname ($host) to IPv6 address"
##############################################
pcp-5.2.2/qa/893-11-
pcp-5.2.2/qa/893:12:seq=`basename $0`
pcp-5.2.2/qa/893-13-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/894-7-
pcp-5.2.2/qa/894:8:seq=`basename $0`
pcp-5.2.2/qa/894-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/895-9-
pcp-5.2.2/qa/895:10:seq=`basename $0`
pcp-5.2.2/qa/895-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/895-112-
pcp-5.2.2/qa/895:113:N=`grep '^ Fetch group' $tmp.log | tee -a $here/$seq.full | wc -l | sed -e 's/ //g'`
pcp-5.2.2/qa/895-114-
##############################################
pcp-5.2.2/qa/895-125-#
pcp-5.2.2/qa/895:126:max_nrec=`expr $N \* 61 + 2`
pcp-5.2.2/qa/895:127:min_nrec=`expr \( $N \) \* 45 + 2`
pcp-5.2.2/qa/895-128-echo "N(fetch groups)=$N max_nrec=$max_nrec min_nrec=$min_nrec" >>$here/$seq.full
pcp-5.2.2/qa/895:129:nrec=`pmdumplog $tmp | grep '^[0-9]' | grep -v '<mark>' | wc -l | sed -e 's/ //g'`
pcp-5.2.2/qa/895-130-echo "nrec=$nrec log records" >>$here/$seq.full
##############################################
pcp-5.2.2/qa/896-7-
pcp-5.2.2/qa/896:8:seq=`basename $0`
pcp-5.2.2/qa/896-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/896-46-cat $tmp.out >> $seq.full
pcp-5.2.2/qa/896:47:eval `cat $tmp.out | sed -e 's/\./_/g'`
pcp-5.2.2/qa/896-48-
##############################################
pcp-5.2.2/qa/897-7-
pcp-5.2.2/qa/897:8:seq=`basename $0`
pcp-5.2.2/qa/897-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/898-8-
pcp-5.2.2/qa/898:9:seq=`basename $0`
pcp-5.2.2/qa/898-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/899-7-
pcp-5.2.2/qa/899:8:seq=`basename $0`
pcp-5.2.2/qa/899-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/899-19-
pcp-5.2.2/qa/899:20:tmpdir=`dirname $tmp`
pcp-5.2.2/qa/899-21-good=$here/20071023-08-06-36.folio
##############################################
pcp-5.2.2/qa/899-104-grep ' archives:' | sed -e 's/archives: //' -e 's/,/ /g' >$tmp.archives
pcp-5.2.2/qa/899:105:for a in `cat $tmp.archives`; do [ -f "$a".index ] || echo archive not found \"$a\"; done
pcp-5.2.2/qa/899-106-
##############################################
pcp-5.2.2/qa/900-7-
pcp-5.2.2/qa/900:8:seq=`basename $0`
pcp-5.2.2/qa/900-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/901-8-
pcp-5.2.2/qa/901:9:seq=`basename $0`
pcp-5.2.2/qa/901-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/902-8-
pcp-5.2.2/qa/902:9:seq=`basename $0`
pcp-5.2.2/qa/902-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/903-7-
pcp-5.2.2/qa/903:8:seq=`basename $0`
pcp-5.2.2/qa/903-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/904-7-
pcp-5.2.2/qa/904:8:seq=`basename $0`
pcp-5.2.2/qa/904-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/905-7-
pcp-5.2.2/qa/905:8:seq=`basename $0`
pcp-5.2.2/qa/905-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/906-7-
pcp-5.2.2/qa/906:8:seq=`basename $0`
pcp-5.2.2/qa/906-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/907-7-
pcp-5.2.2/qa/907:8:seq=`basename $0`
pcp-5.2.2/qa/907-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/908-7-
pcp-5.2.2/qa/908:8:seq=`basename $0`
pcp-5.2.2/qa/908-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/908-28- # cull out any potentially in-situ domains
pcp-5.2.2/qa/908:29: domain=`echo $indom | sed -e 's/\..*//g'`
pcp-5.2.2/qa/908-30- [ $domain -eq 70 ] && continue # MMV
##############################################
pcp-5.2.2/qa/909-8-
pcp-5.2.2/qa/909:9:seq=`basename $0`
pcp-5.2.2/qa/909-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/910-7-
pcp-5.2.2/qa/910:8:seq=`basename $0`
pcp-5.2.2/qa/910-9-
##############################################
pcp-5.2.2/qa/911-7-
pcp-5.2.2/qa/911:8:seq=`basename $0`
pcp-5.2.2/qa/911-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/911-27-
pcp-5.2.2/qa/911:28:ksm_metrics=`pminfo $local mem.ksm | LC_COLLATE=POSIX sort`
pcp-5.2.2/qa/911-29-for tgz in $here/linux/sysfs-ksm-*.tgz
##############################################
pcp-5.2.2/qa/911-34- tar xzf $tgz
pcp-5.2.2/qa/911:35: base=`basename $tgz`
pcp-5.2.2/qa/911-36-
##############################################
pcp-5.2.2/qa/912-7-
pcp-5.2.2/qa/912:8:seq=`basename $0`
pcp-5.2.2/qa/912-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/913-7-
pcp-5.2.2/qa/913:8:seq=`basename $0`
pcp-5.2.2/qa/913-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/914-12-
pcp-5.2.2/qa/914:13:seq=`basename $0`
pcp-5.2.2/qa/914-14-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/914-35-do
pcp-5.2.2/qa/914:36: src=`echo "$args" | sed -e 's/,.*//'`
pcp-5.2.2/qa/914:37: metric=`echo "$args" | sed -e 's/.*,//'`
pcp-5.2.2/qa/914-38- echo | tee -a $here/$seq.full
##############################################
pcp-5.2.2/qa/914-43- # test run faster
pcp-5.2.2/qa/914:44: base=`echo $src | sed -e 's/-a *//'`
pcp-5.2.2/qa/914-45- for file in $base.*
pcp-5.2.2/qa/914-46- do
pcp-5.2.2/qa/914:47: suff=`echo $file | sed -e "s@$base.@@" -e 's/\.xz$//'`
pcp-5.2.2/qa/914-48- case "$file"
##############################################
pcp-5.2.2/qa/915-7-
pcp-5.2.2/qa/915:8:seq=`basename $0`
pcp-5.2.2/qa/915-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/915-25-[ -z "$host" ] && _notrun "Cannot discover local host name"
pcp-5.2.2/qa/915:26:interface=`_host_to_ipaddr $host`
pcp-5.2.2/qa/915-27-[ -z "$interface" ] && _notrun "Cannot translate hostname ($host) to interface"
##############################################
pcp-5.2.2/qa/916-12-
pcp-5.2.2/qa/916:13:seq=`basename $0`
pcp-5.2.2/qa/916-14-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/917-7-
pcp-5.2.2/qa/917:8:seq=`basename $0`
pcp-5.2.2/qa/917-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/918-7-
pcp-5.2.2/qa/918:8:seq=`basename $0`
pcp-5.2.2/qa/918-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/919-7-
pcp-5.2.2/qa/919:8:seq=`basename $0`
pcp-5.2.2/qa/919-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/920-10-
pcp-5.2.2/qa/920:11:seq=`basename $0`
pcp-5.2.2/qa/920-12-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/920-110- sleep 1
pcp-5.2.2/qa/920:111: i=`expr $i + 1`
pcp-5.2.2/qa/920-112-done
##############################################
pcp-5.2.2/qa/921-8-
pcp-5.2.2/qa/921:9:seq=`basename $0`
pcp-5.2.2/qa/921-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/922-7-
pcp-5.2.2/qa/922:8:seq=`basename $0`
pcp-5.2.2/qa/922-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/923-8-
pcp-5.2.2/qa/923:9:seq=`basename $0`
pcp-5.2.2/qa/923-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/924-7-
pcp-5.2.2/qa/924:8:seq=`basename $0`
pcp-5.2.2/qa/924-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/925-9-
pcp-5.2.2/qa/925:10:seq=`basename $0`
pcp-5.2.2/qa/925-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/926-13-
pcp-5.2.2/qa/926:14:seq=`basename $0`
pcp-5.2.2/qa/926-15-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/926-61-rm -f $tmp.0 $tmp.index $tmp.meta
pcp-5.2.2/qa/926:62:outfile=`basename $tmp`
pcp-5.2.2/qa/926:63:outdir=`dirname $tmp`
pcp-5.2.2/qa/926-64-ganglia2pcp -s "Feb 1 12:00:00 UTC 2015" -f $outfile -d $outdir -Z UTC $indir
##############################################
pcp-5.2.2/qa/927-11-
pcp-5.2.2/qa/927:12:seq=`basename $0`
pcp-5.2.2/qa/927-13-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/928-7-
pcp-5.2.2/qa/928:8:seq=`basename $0`
pcp-5.2.2/qa/928-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/929-8-
pcp-5.2.2/qa/929:9:seq=`basename $0`
pcp-5.2.2/qa/929-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/930-7-
pcp-5.2.2/qa/930:8:seq=`basename $0`
pcp-5.2.2/qa/930-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/931-8-
pcp-5.2.2/qa/931:9:seq=`basename $0`
pcp-5.2.2/qa/931-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/932-7-
pcp-5.2.2/qa/932:8:seq=`basename $0`
pcp-5.2.2/qa/932-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/933-7-
pcp-5.2.2/qa/933:8:seq=`basename $0`
pcp-5.2.2/qa/933-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/933-42-pmsleep 0.1 # some time for sleep process to start
pcp-5.2.2/qa/933:43:base=`pmprobe -v proc.runq.stopped | awk '{ print $3 }'`
pcp-5.2.2/qa/933-44-
##############################################
pcp-5.2.2/qa/933-46-pmsleep 0.1 # some time for process to stop
pcp-5.2.2/qa/933:47:stop=`pmprobe -v proc.runq.stopped | awk '{ print $3 }'`
pcp-5.2.2/qa/933-48-
##############################################
pcp-5.2.2/qa/933-50-pmsleep 0.1 # some time for process to continue
pcp-5.2.2/qa/933:51:cont=`pmprobe -v proc.runq.stopped | awk '{ print $3 }'`
pcp-5.2.2/qa/933-52-
##############################################
pcp-5.2.2/qa/934-7-
pcp-5.2.2/qa/934:8:seq=`basename $0`
pcp-5.2.2/qa/934-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/935-7-
pcp-5.2.2/qa/935:8:seq=`basename $0`
pcp-5.2.2/qa/935-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/936-7-
pcp-5.2.2/qa/936:8:seq=`basename $0`
pcp-5.2.2/qa/936-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/937-7-
pcp-5.2.2/qa/937:8:seq=`basename $0`
pcp-5.2.2/qa/937-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/938-7-
pcp-5.2.2/qa/938:8:seq=`basename $0`
pcp-5.2.2/qa/938-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/939-7-
pcp-5.2.2/qa/939:8:seq=`basename $0`
pcp-5.2.2/qa/939-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/940-7-
pcp-5.2.2/qa/940:8:seq=`basename $0`
pcp-5.2.2/qa/940-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/941-11-
pcp-5.2.2/qa/941:12:seq=`basename $0`
pcp-5.2.2/qa/941-13-
##############################################
pcp-5.2.2/qa/941-44-_get_pids_by_name pmcd >$tmp.pids
pcp-5.2.2/qa/941:45:num_pmcds=`cat $tmp.pids | wc -l | sed -e 's/ //g'`
pcp-5.2.2/qa/941-46-if $check
##############################################
pcp-5.2.2/qa/941-68- $PCP_PS_PROG $PCP_PS_ALL_FLAGS >$tmp.ps
pcp-5.2.2/qa/941:69: for pid in `cat $tmp.pids`
pcp-5.2.2/qa/941-70- do
##############################################
pcp-5.2.2/qa/941-96-
pcp-5.2.2/qa/941:97:pid=`cat $tmp.pids`
pcp-5.2.2/qa/941-98-if [ -f $PCP_LOG_DIR/pmcd/pmcd.log ]
##############################################
pcp-5.2.2/qa/941-128-then
pcp-5.2.2/qa/941:129: if [ "$pid" = "`cat $PCP_RUN_DIR/pmcd.pid`" ]
pcp-5.2.2/qa/941-130- then
##############################################
pcp-5.2.2/qa/941-132- else
pcp-5.2.2/qa/941:133: echo "Error: $PCP_RUN_DIR/pmcd.pid -> PID `cat $PCP_RUN_DIR/pmcd.pid` not pmcd (PID=$pid)"
pcp-5.2.2/qa/941-134- status=1
##############################################
pcp-5.2.2/qa/942-12-
pcp-5.2.2/qa/942:13:seq=`basename $0`
pcp-5.2.2/qa/942-14-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/943-7-
pcp-5.2.2/qa/943:8:seq=`basename $0`
pcp-5.2.2/qa/943-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/944-13-
pcp-5.2.2/qa/944:14:seq=`basename $0`
pcp-5.2.2/qa/944-15-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/945-7-
pcp-5.2.2/qa/945:8:seq=`basename $0`
pcp-5.2.2/qa/945-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/946-7-
pcp-5.2.2/qa/946:8:seq=`basename $0`
pcp-5.2.2/qa/946-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/947-7-
pcp-5.2.2/qa/947:8:seq=`basename $0`
pcp-5.2.2/qa/947-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/948-7-
pcp-5.2.2/qa/948:8:seq=`basename $0`
pcp-5.2.2/qa/948-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/948-112-echo "=== OK case ===" | tee -a $seq.full
pcp-5.2.2/qa/948:113:hertz=`pmprobe -v kernel.all.hz | $PCP_AWK_PROG '{ print $3 }'`
pcp-5.2.2/qa/948:114:pagesz=`pmprobe -v hinv.pagesize | $PCP_AWK_PROG '{ print $3 }'`
pcp-5.2.2/qa/948-115-
##############################################
pcp-5.2.2/qa/949-7-
pcp-5.2.2/qa/949:8:seq=`basename $0`
pcp-5.2.2/qa/949-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/950-7-
pcp-5.2.2/qa/950:8:seq=`basename $0`
pcp-5.2.2/qa/950-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/951-7-
pcp-5.2.2/qa/951:8:seq=`basename $0`
pcp-5.2.2/qa/951-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/951-254-now=`pmprobe -v pmcd.pdu_in.text_req | cut -d ' ' -f 3`
pcp-5.2.2/qa/951:255:limit=`expr $now + 4`
pcp-5.2.2/qa/951-256-
##############################################
pcp-5.2.2/qa/952-14-
pcp-5.2.2/qa/952:15:seq=`basename $0`
pcp-5.2.2/qa/952-16-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/953-6-
pcp-5.2.2/qa/953:7:seq=`basename $0`
pcp-5.2.2/qa/953-8-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/954-7-
pcp-5.2.2/qa/954:8:seq=`basename $0`
pcp-5.2.2/qa/954-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/955-9-
pcp-5.2.2/qa/955:10:seq=`basename $0`
pcp-5.2.2/qa/955-11-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/956-7-
pcp-5.2.2/qa/956:8:seq=`basename $0`
pcp-5.2.2/qa/956-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/956-142- pmsleep 0.2
pcp-5.2.2/qa/956:143: i=`expr $i + 1`
pcp-5.2.2/qa/956-144-done
##############################################
pcp-5.2.2/qa/956-157-pmprobe -h unix:$tmp.socket -i hinv.ncpu | tee $tmp.tmp
pcp-5.2.2/qa/956:158:nval=`$PCP_AWK_PROG <$tmp.tmp '{print $2}'`
pcp-5.2.2/qa/956-159-if [ -z "$nval" -o "$nval" -ge 0 ]
##############################################
pcp-5.2.2/qa/957-7-
pcp-5.2.2/qa/957:8:seq=`basename $0`
pcp-5.2.2/qa/957-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/957-36-pmda="-Kclear -Kadd,60,$PCP_PMDAS_DIR/linux/pmda_linux.so,linux_init"
pcp-5.2.2/qa/957:37:trees=`pminfo -n $pmns | $PCP_AWK_PROG -F. '{ print $1 }' | sort -u`
pcp-5.2.2/qa/957-38-
##############################################
pcp-5.2.2/qa/958-8-
pcp-5.2.2/qa/958:9:seq=`basename $0`
pcp-5.2.2/qa/958-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/959-7-
pcp-5.2.2/qa/959:8:seq=`basename $0`
pcp-5.2.2/qa/959-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/960-7-
pcp-5.2.2/qa/960:8:seq=`basename $0`
pcp-5.2.2/qa/960-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/961-8-
pcp-5.2.2/qa/961:9:seq=`basename $0`
pcp-5.2.2/qa/961-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/962-8-
pcp-5.2.2/qa/962:9:seq=`basename $0`
pcp-5.2.2/qa/962-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/962-23-pmdumplog -z -x archives/count-mark | egrep '(^[^ ])|(pswitch)' >$tmp.out
pcp-5.2.2/qa/962:24:for line in `$PCP_AWK_PROG <$tmp.out '/<mark>/ { print NR }'`
pcp-5.2.2/qa/962-25-do
pcp-5.2.2/qa/962:26: a=`expr $line - 4`
pcp-5.2.2/qa/962:27: b=`expr $line + 4`
pcp-5.2.2/qa/962-28- sed -n -e "${a},${b}p" <$tmp.out
##############################################
pcp-5.2.2/qa/963-7-
pcp-5.2.2/qa/963:8:seq=`basename $0`
pcp-5.2.2/qa/963-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/963-50- unset $var
pcp-5.2.2/qa/963:51: xvalue=`src/getconfig -o "$var" | sed -e 's/.* -> //' -e 's/[ ]*$//' -e 's/\\\\/<backslash>/g'`
pcp-5.2.2/qa/963-52- #debug# echo "$var: $value ? $xvalue"
##############################################
pcp-5.2.2/qa/964-14-
pcp-5.2.2/qa/964:15:seq=`basename $0`
pcp-5.2.2/qa/964-16-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/965-7-
pcp-5.2.2/qa/965:8:seq=`basename $0`
pcp-5.2.2/qa/965-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/966-7-
pcp-5.2.2/qa/966:8:seq=`basename $0`
pcp-5.2.2/qa/966-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/967-7-
pcp-5.2.2/qa/967:8:seq=`basename $0`
pcp-5.2.2/qa/967-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/967-92-# sources
pcp-5.2.2/qa/967:93:share_dir=`dirname $PCP_SHARE_DIR`
pcp-5.2.2/qa/967-94-zsh_comp=${share_dir}/zsh/site-functions/_pcp
##############################################
pcp-5.2.2/qa/968-7-
pcp-5.2.2/qa/968:8:seq=`basename $0`
pcp-5.2.2/qa/968-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/969-7-
pcp-5.2.2/qa/969:8:seq=`basename $0`
pcp-5.2.2/qa/969-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/970-7-
pcp-5.2.2/qa/970:8:seq=`basename $0`
pcp-5.2.2/qa/970-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/970-28-{
pcp-5.2.2/qa/970:29: tmpx=`echo $tmp`
pcp-5.2.2/qa/970-30- sed -e 's/^Archive:.* Host:/ARCHIVE: Host:/' \
##############################################
pcp-5.2.2/qa/971-7-
pcp-5.2.2/qa/971:8:seq=`basename $0`
pcp-5.2.2/qa/971-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/972-7-
pcp-5.2.2/qa/972:8:seq=`basename $0`
pcp-5.2.2/qa/972-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/972-12-
pcp-5.2.2/qa/972:13:python_path=`which $python`
pcp-5.2.2/qa/972-14-pmda_path="$PCP_PMDAS_DIR/zswap"
##############################################
pcp-5.2.2/qa/973-7-
pcp-5.2.2/qa/973:8:seq=`basename $0`
pcp-5.2.2/qa/973-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/974-7-
pcp-5.2.2/qa/974:8:seq=`basename $0`
pcp-5.2.2/qa/974-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/974-45- tar xzf $tgz
pcp-5.2.2/qa/974:46: base=`basename $tgz`
pcp-5.2.2/qa/974-47-
pcp-5.2.2/qa/974-48- echo "== Extracting subtrees for later use - $base" | tee -a $seq.full
pcp-5.2.2/qa/974:49: trees=`pminfo proc | awk -F. '{ print $2 }' | sort -u | egrep -v 'nproc'`
pcp-5.2.2/qa/974-50- echo $trees >> $here/$seq.full
##############################################
pcp-5.2.2/qa/974-59- do
pcp-5.2.2/qa/974:60: metric=`grep $tree $tmp.names | head -1`
pcp-5.2.2/qa/974-61- [ $tree = "id" ] && metric="proc.id.egid"
##############################################
pcp-5.2.2/qa/975-7-
pcp-5.2.2/qa/975:8:seq=`basename $0`
pcp-5.2.2/qa/975-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/975-124- do
pcp-5.2.2/qa/975:125: result=`echo $f.$sample | sed -e 's/.unsorted//g'`
pcp-5.2.2/qa/975-126- sort -u < $f.$sample > $result
##############################################
pcp-5.2.2/qa/976-7-
pcp-5.2.2/qa/976:8:seq=`basename $0`
pcp-5.2.2/qa/976-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/977-7-
pcp-5.2.2/qa/977:8:seq=`basename $0`
pcp-5.2.2/qa/977-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/978-7-
pcp-5.2.2/qa/978:8:seq=`basename $0`
pcp-5.2.2/qa/978-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/979-8-
pcp-5.2.2/qa/979:9:seq=`basename $0`
pcp-5.2.2/qa/979-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/980-8-
pcp-5.2.2/qa/980:9:seq=`basename $0`
pcp-5.2.2/qa/980-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/981-7-
pcp-5.2.2/qa/981:8:seq=`basename $0`
pcp-5.2.2/qa/981-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/982-7-
pcp-5.2.2/qa/982:8:seq=`basename $0`
pcp-5.2.2/qa/982-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/983-7-
pcp-5.2.2/qa/983:8:seq=`basename $0`
pcp-5.2.2/qa/983-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/983-84-# Filter the stderr of this using a temp file
pcp-5.2.2/qa/983:85:pmcd_pid=`$sudo sh $tmp.sh 2>$tmp.tmp`
pcp-5.2.2/qa/983-86-cat $tmp.tmp 1>&2
##############################################
pcp-5.2.2/qa/984-7-
pcp-5.2.2/qa/984:8:seq=`basename $0`
pcp-5.2.2/qa/984-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/985-6-
pcp-5.2.2/qa/985:7:seq=`basename $0`
pcp-5.2.2/qa/985-8-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/986-7-
pcp-5.2.2/qa/986:8:seq=`basename $0`
pcp-5.2.2/qa/986-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/987-7-
pcp-5.2.2/qa/987:8:seq=`basename $0`
pcp-5.2.2/qa/987-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/987-40- $sudo tar xzf $tgz
pcp-5.2.2/qa/987:41: base=`basename $tgz`
pcp-5.2.2/qa/987-42-
##############################################
pcp-5.2.2/qa/988-7-
pcp-5.2.2/qa/988:8:seq=`basename $0`
pcp-5.2.2/qa/988-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/988-41- $sudo tar xzf $tgz
pcp-5.2.2/qa/988:42: base=`basename $tgz`
pcp-5.2.2/qa/988-43-
##############################################
pcp-5.2.2/qa/989-7-
pcp-5.2.2/qa/989:8:seq=`basename $0`
pcp-5.2.2/qa/989-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/990-7-
pcp-5.2.2/qa/990:8:seq=`basename $0`
pcp-5.2.2/qa/990-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/990-56-
pcp-5.2.2/qa/990:57: files=`ls -1 ${MMV_STATS_DIR}/${section}-* | LC_COLLATE=POSIX sort`
pcp-5.2.2/qa/990-58- for file in $files
pcp-5.2.2/qa/990-59- do
pcp-5.2.2/qa/990:60: echo -- dump `basename $file`
pcp-5.2.2/qa/990-61- $PCP_PMDAS_DIR/mmv/mmvdump $file | _filter
##############################################
pcp-5.2.2/qa/991-7-
pcp-5.2.2/qa/991:8:seq=`basename $0`
pcp-5.2.2/qa/991-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/992-7-
pcp-5.2.2/qa/992:8:seq=`basename $0`
pcp-5.2.2/qa/992-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/993-8-
pcp-5.2.2/qa/993:9:seq=`basename $0`
pcp-5.2.2/qa/993-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/994-15-
pcp-5.2.2/qa/994:16:seq=`basename $0`
pcp-5.2.2/qa/994-17-$fix || echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/994-100-do
pcp-5.2.2/qa/994:101: line=`expr $line + 1`
pcp-5.2.2/qa/994-102- if [ -z "$target" ]
##############################################
pcp-5.2.2/qa/994-107- else
pcp-5.2.2/qa/994:108: macro=`sed -n -e "${line}p" src/permslist | $PCP_AWK_PROG -F\| '{print $5}'`
pcp-5.2.2/qa/994-109- echo "Warning: src/permslist: pcp.conf macro problem: $macro -> nothing"
##############################################
pcp-5.2.2/qa/994-145- #
pcp-5.2.2/qa/994:146: eval `stat -f '_mode=%Op _owner=%Su _group=%Sg' $target`
pcp-5.2.2/qa/994:147: _mode=`echo $_mode | sed -e 's/.*\(....\)$/\1/' -e 's/^0*\(.\)/\1/'`
pcp-5.2.2/qa/994-148- else
##############################################
pcp-5.2.2/qa/995-7-
pcp-5.2.2/qa/995:8:seq=`basename $0`
pcp-5.2.2/qa/995-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/996-7-
pcp-5.2.2/qa/996:8:seq=`basename $0`
pcp-5.2.2/qa/996-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/997-7-
pcp-5.2.2/qa/997:8:seq=`basename $0`
pcp-5.2.2/qa/997-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/998-8-
pcp-5.2.2/qa/998:9:seq=`basename $0`
pcp-5.2.2/qa/998-10-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/999-7-
pcp-5.2.2/qa/999:8:seq=`basename $0`
pcp-5.2.2/qa/999-9-echo "QA output created by $seq"
##############################################
pcp-5.2.2/qa/admin/allow-pmlc-access-10-#
pcp-5.2.2/qa/admin/allow-pmlc-access:11:_getnetworkaddr()
pcp-5.2.2/qa/admin/allow-pmlc-access-12-{
##############################################
pcp-5.2.2/qa/admin/allow-pmlc-access-19- then
pcp-5.2.2/qa/admin/allow-pmlc-access:20: host_out=`host $host`
pcp-5.2.2/qa/admin/allow-pmlc-access-21- if echo "$host_out" | grep ' has address ' >/dev/null
pcp-5.2.2/qa/admin/allow-pmlc-access-22- then
pcp-5.2.2/qa/admin/allow-pmlc-access:23: addr=`echo "$host_out" | sed -e 's/.*address //'`
pcp-5.2.2/qa/admin/allow-pmlc-access-24- $__verbose && echo "_getnetworkaddr: host -> addr=$addr" >&2
##############################################
pcp-5.2.2/qa/admin/allow-pmlc-access-33- #
pcp-5.2.2/qa/admin/allow-pmlc-access:34: __config=`ifconfig | grep "[ :]$addr[ /]"`
pcp-5.2.2/qa/admin/allow-pmlc-access:35: if echo "$__config" | grep '[Mm]ask' >/dev/null
pcp-5.2.2/qa/admin/allow-pmlc-access-36- then
pcp-5.2.2/qa/admin/allow-pmlc-access:37: mask=`echo "$__config" | sed -e 's/.*ask[ :]\([^ ][^ ]*\).*/\1/'`
pcp-5.2.2/qa/admin/allow-pmlc-access-38- elif echo "$__config" | grep " $addr/" >/dev/null
pcp-5.2.2/qa/admin/allow-pmlc-access-39- then
pcp-5.2.2/qa/admin/allow-pmlc-access:40: mask=`echo "$__config" | sed -e '/\/24/s/.*/255.255.255.0/'`
pcp-5.2.2/qa/admin/allow-pmlc-access-41- else
##############################################
pcp-5.2.2/qa/admin/allow-pmlc-access-66- #
pcp-5.2.2/qa/admin/allow-pmlc-access:67: mask=`ip -f inet -o address | grep " $addr/" | sed -e 's/.*inet //' -e 's/[0-9.][0-9.]*\/\([^ ][^ ]*\) .*/\1/'`
pcp-5.2.2/qa/admin/allow-pmlc-access-68- $__verbose && echo "_getnetworkaddr: ip -> mask=$mask" >&2
##############################################
pcp-5.2.2/qa/admin/check-manifest-30-#
pcp-5.2.2/qa/admin/check-manifest:31:home=`echo $0 | sed -e 's/\/*check-manifest$//'`
pcp-5.2.2/qa/admin/check-manifest-32-[ -z "$home" ] && home=`pwd`
##############################################
pcp-5.2.2/qa/admin/check-manifest-67-done
pcp-5.2.2/qa/admin/check-manifest:68:shift `expr $OPTIND - 1`
pcp-5.2.2/qa/admin/check-manifest-69-[ $# -eq 1 ] || _usage
##############################################
pcp-5.2.2/qa/admin/check-manifest-86- then
pcp-5.2.2/qa/admin/check-manifest:87: echo "Temporary files preserved: `echo $tmp.*`"
pcp-5.2.2/qa/admin/check-manifest-88- else
##############################################
pcp-5.2.2/qa/admin/check-manifest-125-$home/whatami >$tmp.tmp
pcp-5.2.2/qa/admin/check-manifest:126:case "`sed <$tmp.tmp -e 's/ */ /g' -e 's/ \[.*//' | cut -d ' ' -f 4-`"
pcp-5.2.2/qa/admin/check-manifest-127-in
##############################################
pcp-5.2.2/qa/admin/check-manifest-180-then
pcp-5.2.2/qa/admin/check-manifest:181: echo "$0: Botch: don't recognize pkgtool for: `cat $tmp.tmp`"
pcp-5.2.2/qa/admin/check-manifest-182- exit
##############################################
pcp-5.2.2/qa/admin/check-manifest-202- "cpan("*")")
pcp-5.2.2/qa/admin/check-manifest:203: module=`echo "$info" | sed -e 's/.*(//' -e 's/)//'`
pcp-5.2.2/qa/admin/check-manifest-204- if [ -z "$module" ]
##############################################
pcp-5.2.2/qa/admin/check-manifest-218- then
pcp-5.2.2/qa/admin/check-manifest:219: echo >&2 "cpan -l -> `wc -l <$tmp.perlmodules | sed -e 's/ *//g'` lines"
pcp-5.2.2/qa/admin/check-manifest-220- cat -n $tmp.perlmodules | head >&2 -3
##############################################
pcp-5.2.2/qa/admin/check-manifest-248- "pip("*")"|"pip3("*")")
pcp-5.2.2/qa/admin/check-manifest:249: tool=`echo "$info" | sed -e 's/(.*//'`
pcp-5.2.2/qa/admin/check-manifest:250: module=`echo "$info" | sed -e 's/.*(//' -e 's/)//'`
pcp-5.2.2/qa/admin/check-manifest-251- if [ -z "$tool" ]
##############################################
pcp-5.2.2/qa/admin/check-manifest-262- fi
pcp-5.2.2/qa/admin/check-manifest:263: if `which "$tool"` >/dev/null
pcp-5.2.2/qa/admin/check-manifest-264- then
pcp-5.2.2/qa/admin/check-manifest-265- $tool show -f "$module" >$tmp.tmp
pcp-5.2.2/qa/admin/check-manifest:266: match=`echo "$1" | sed -e 's;.*-packages/;;'`
pcp-5.2.2/qa/admin/check-manifest-267- if grep " $match\$" $tmp.tmp >/dev/null
##############################################
pcp-5.2.2/qa/admin/check-manifest-291- then
pcp-5.2.2/qa/admin/check-manifest:292: _target=`realpath "$1"`
pcp-5.2.2/qa/admin/check-manifest-293- if [ "$_target" != "$1" ]
##############################################
pcp-5.2.2/qa/admin/check-manifest-309- /usr/bin/*)
pcp-5.2.2/qa/admin/check-manifest:310: _target=`echo "$1" | sed -e 's;^/usr/bin/;/bin/;'`
pcp-5.2.2/qa/admin/check-manifest-311- dpkg-query -S "$_target" 2>/dev/null | sed -e 's/:.*//' >$tmp.tmp
##############################################
pcp-5.2.2/qa/admin/check-manifest-318- echo >&2 "+++ Bear Trap +++"
pcp-5.2.2/qa/admin/check-manifest:319: ls >&2 -ild /usr/bin /bin "$1" "`echo "$1" | sed -e 's;/usr;;'`"
pcp-5.2.2/qa/admin/check-manifest:320: which realpath >/dev/null 2>/&1 && echo >&2 "realpath -> `realpath "$1"`"
pcp-5.2.2/qa/admin/check-manifest-321- echo >&2 "_target=$_target"
##############################################
pcp-5.2.2/qa/admin/check-manifest-338- then
pcp-5.2.2/qa/admin/check-manifest:339: _target=`realpath "$1"`
pcp-5.2.2/qa/admin/check-manifest-340- if [ "$_target" != "$1" ]
##############################################
pcp-5.2.2/qa/admin/check-manifest-384- #
pcp-5.2.2/qa/admin/check-manifest:385: pkg contents -H -o pkg.name -a path=`echo "$1" | sed -e 's;^/;;' -e 1q` 2>/dev/null
pcp-5.2.2/qa/admin/check-manifest-386- ;;
##############################################
pcp-5.2.2/qa/admin/check-manifest-438- #
pcp-5.2.2/qa/admin/check-manifest:439: _path=`realpath "$1"`
pcp-5.2.2/qa/admin/check-manifest-440- if $very_verbose
##############################################
pcp-5.2.2/qa/admin/check-manifest-445- do
pcp-5.2.2/qa/admin/check-manifest:446: grep -rl `echo "$_path$suff" | sed -e 's;^/;^;' -e 's/$/\$/'` /var/log/packages \
pcp-5.2.2/qa/admin/check-manifest-447- | sed >$tmp.tmp \
##############################################
pcp-5.2.2/qa/admin/check-manifest-501- fi
pcp-5.2.2/qa/admin/check-manifest:502: base=`echo "$1" | sed -e 's/.*\///'`
pcp-5.2.2/qa/admin/check-manifest-503- find $cellar -name $base \
##############################################
pcp-5.2.2/qa/admin/check-manifest-536- rm -f $tmp.match
pcp-5.2.2/qa/admin/check-manifest:537: for xpect in `echo "$1" | sed -e 's/|/ /g'`
pcp-5.2.2/qa/admin/check-manifest-538- do
##############################################
pcp-5.2.2/qa/admin/check-manifest-617- #
pcp-5.2.2/qa/admin/check-manifest:618: basename=`echo "$xpect" | sed -e 's/.*\///'`
pcp-5.2.2/qa/admin/check-manifest-619- if [ "$basename" = "$2" ]
##############################################
pcp-5.2.2/qa/admin/check-manifest-631- #
pcp-5.2.2/qa/admin/check-manifest:632: __pkg=`echo "$2" | sed -e 's;.*/;;'`
pcp-5.2.2/qa/admin/check-manifest-633- [ "$xpect" = "$__pkg" ] && xpect="$2"
##############################################
pcp-5.2.2/qa/admin/check-manifest-664- rm -f $tmp.msg $tmp.ok
pcp-5.2.2/qa/admin/check-manifest:665: for file in `echo "$target" | sed -e 's/|/ /g'`
pcp-5.2.2/qa/admin/check-manifest-666- do
##############################################
pcp-5.2.2/qa/admin/check-manifest-716- *)
pcp-5.2.2/qa/admin/check-manifest:717: which=`which $file 2>/dev/null`
pcp-5.2.2/qa/admin/check-manifest-718- if [ -z "$which" -o ! -x "$which" ]
##############################################
pcp-5.2.2/qa/admin/check-manifest-728- then
pcp-5.2.2/qa/admin/check-manifest:729: pkg=`_path_to_pkg "$file" "$pkginfo"`
pcp-5.2.2/qa/admin/check-manifest-730- if [ -f $tmp.abort ]
##############################################
pcp-5.2.2/qa/admin/check-manifest-800-
pcp-5.2.2/qa/admin/check-manifest:801:$PCP_ECHO_PROG $PCP_ECHO_N "Checking the `wc -l <$tmp.manifest | sed -e 's/ //g'` manifest entries for `hostname -s` ""$PCP_ECHO_C"
pcp-5.2.2/qa/admin/check-manifest-802-if $verbose || $very_verbose
##############################################
pcp-5.2.2/qa/admin/check-manifest-833- !*\?) # negated guard
pcp-5.2.2/qa/admin/check-manifest:834: _guard=`echo "$guard" | sed -e 's/^!//' -e 's/?$//'`
pcp-5.2.2/qa/admin/check-manifest-835- if which $_guard >/dev/null 2>&1
##############################################
pcp-5.2.2/qa/admin/check-manifest-840- *\?) # guard
pcp-5.2.2/qa/admin/check-manifest:841: _guard=`echo "$guard" | sed -e 's/?$//'`
pcp-5.2.2/qa/admin/check-manifest-842- if which $_guard >/dev/null 2>&1
##############################################
pcp-5.2.2/qa/admin/check-manifest-854-
pcp-5.2.2/qa/admin/check-manifest:855: line=`echo $extra | sed -e 's/.*:\([0-9][0-9]*\)$/\1/'`
pcp-5.2.2/qa/admin/check-manifest-856- # reduce things like "[lm-sensors (QA optional)]:1189" down to
##############################################
pcp-5.2.2/qa/admin/check-manifest-891- # special case Perl, no module name
pcp-5.2.2/qa/admin/check-manifest:892: _perl=`echo "$target" | sed -e 's/:://'`
pcp-5.2.2/qa/admin/check-manifest-893- _target=`find $_perl_dirs -name "$_perl.*" -print 2>/dev/null \
##############################################
pcp-5.2.2/qa/admin/check-manifest-899- then
pcp-5.2.2/qa/admin/check-manifest:900: $very_verbose && echo >&2 "... looking for $_perl.* from candidates: `cat $tmp.debug`"
pcp-5.2.2/qa/admin/check-manifest:901: if [ "`expr "$pkginfo" : "cpan(.*"`" -gt 0 ]
pcp-5.2.2/qa/admin/check-manifest-902- then
##############################################
pcp-5.2.2/qa/admin/check-manifest-917- # special case Perl, with module and submodule name
pcp-5.2.2/qa/admin/check-manifest:918: _module=`echo "$target" | sed -e 's/::.*//'`
pcp-5.2.2/qa/admin/check-manifest:919: _submodule=`echo "$target" | sed -e 's/[^:]*::\([^:][^:]*\)::.*/\1/'`
pcp-5.2.2/qa/admin/check-manifest:920: _perl=`echo "$target" | sed -e 's/.*:://'`
pcp-5.2.2/qa/admin/check-manifest-921- _target=`find $_perl_dirs -name "$_perl.*" -print 2>/dev/null \
##############################################
pcp-5.2.2/qa/admin/check-manifest-927- then
pcp-5.2.2/qa/admin/check-manifest:928: $very_verbose && echo >&2 "... looking for $_module/($_submodule|$_submodule/$_perl)/$_perl.* from candidates: `cat $tmp.debug`"
pcp-5.2.2/qa/admin/check-manifest:929: if [ "`expr "$pkginfo" : "cpan(.*"`" -gt 0 ]
pcp-5.2.2/qa/admin/check-manifest-930- then
##############################################
pcp-5.2.2/qa/admin/check-manifest-945- # normal case Perl, with module name
pcp-5.2.2/qa/admin/check-manifest:946: _module=`echo "$target" | sed -e 's/::.*//'`
pcp-5.2.2/qa/admin/check-manifest:947: _perl=`echo "$target" | sed -e 's/.*:://'`
pcp-5.2.2/qa/admin/check-manifest-948- _target=`find $_perl_dirs -name "$_perl.*" -print 2>/dev/null \
##############################################
pcp-5.2.2/qa/admin/check-manifest-954- then
pcp-5.2.2/qa/admin/check-manifest:955: $very_verbose && echo >&2 "... looking for $_module/$_perl.* from candidates: `cat $tmp.debug`"
pcp-5.2.2/qa/admin/check-manifest:956: if [ "`expr "$pkginfo" : "cpan(.*"`" -gt 0 ]
pcp-5.2.2/qa/admin/check-manifest-957- then
##############################################
pcp-5.2.2/qa/admin/check-manifest-1042- fi
pcp-5.2.2/qa/admin/check-manifest:1043: $PCP_ECHO_PROG $PCP_ECHO_N "Checking the `wc -l <$tmp.unavail | sed -e 's/ //g'` N/A packages for `hostname -s` ""$PCP_ECHO_C"
pcp-5.2.2/qa/admin/check-manifest-1044- if $verbose
##############################################
pcp-5.2.2/qa/admin/check-manifest-1090- #
pcp-5.2.2/qa/admin/check-manifest:1091: prefix=`echo "$pkg" | sed -e 's/[. ].*//'`
pcp-5.2.2/qa/admin/check-manifest-1092- if yum search "$pkg" 2>&1 | grep "^$prefix" >$tmp.out 2>&1
##############################################
pcp-5.2.2/qa/admin/check-manifest-1103- #
pcp-5.2.2/qa/admin/check-manifest:1104: prefix=`echo "$pkg" | sed -e 's/[. ].*//'`
pcp-5.2.2/qa/admin/check-manifest-1105- if dnf search "$pkg" 2>&1 | grep "^$prefix" >$tmp.out 2>&1
##############################################
pcp-5.2.2/qa/admin/check-manifest-1114- #
pcp-5.2.2/qa/admin/check-manifest:1115: prefix=`echo "$pkg" | sed -e 's/^\([^0-9-]*\).*/\1/'`
pcp-5.2.2/qa/admin/check-manifest-1116- if zypper search -t package "$pkg" | grep "| $prefix" >$tmp.out 2>&1
##############################################
pcp-5.2.2/qa/admin/check-manifest-1136- #
pcp-5.2.2/qa/admin/check-manifest:1137: prefix=`echo "$pkg" | sed -e 's/-[0-9].*//'`
pcp-5.2.2/qa/admin/check-manifest-1138- if pkg search "$pkg" 2>&1 | grep "^$prefix" >$tmp.out 2>&1
##############################################
pcp-5.2.2/qa/admin/check-vm-8-#
pcp-5.2.2/qa/admin/check-vm:9:_getnetworkaddr()
pcp-5.2.2/qa/admin/check-vm-10-{
##############################################
pcp-5.2.2/qa/admin/check-vm-17- then
pcp-5.2.2/qa/admin/check-vm:18: host_out=`host $host`
pcp-5.2.2/qa/admin/check-vm-19- if echo "$host_out" | grep ' has address ' >/dev/null
pcp-5.2.2/qa/admin/check-vm-20- then
pcp-5.2.2/qa/admin/check-vm:21: addr=`echo "$host_out" | sed -e 's/.*address //'`
pcp-5.2.2/qa/admin/check-vm-22- $__verbose && echo "_getnetworkaddr: host -> addr=$addr" >&2
##############################################
pcp-5.2.2/qa/admin/check-vm-31- #
pcp-5.2.2/qa/admin/check-vm:32: __config=`ifconfig | grep "[ :]$addr[ /]"`
pcp-5.2.2/qa/admin/check-vm:33: if echo "$__config" | grep '[Mm]ask' >/dev/null
pcp-5.2.2/qa/admin/check-vm-34- then
pcp-5.2.2/qa/admin/check-vm:35: mask=`echo "$__config" | sed -e 's/.*ask[ :]\([^ ][^ ]*\).*/\1/'`
pcp-5.2.2/qa/admin/check-vm-36- elif echo "$__config" | grep " $addr/" >/dev/null
pcp-5.2.2/qa/admin/check-vm-37- then
pcp-5.2.2/qa/admin/check-vm:38: mask=`echo "$__config" | sed -e '/\/24/s/.*/255.255.255.0/'`
pcp-5.2.2/qa/admin/check-vm-39- else
##############################################
pcp-5.2.2/qa/admin/check-vm-64- #
pcp-5.2.2/qa/admin/check-vm:65: mask=`ip -f inet -o address | grep " $addr/" | sed -e 's/.*inet //' -e 's/[0-9.][0-9.]*\/\([^ ][^ ]*\) .*/\1/'`
pcp-5.2.2/qa/admin/check-vm-66- $__verbose && echo "_getnetworkaddr: ip -> mask=$mask" >&2
##############################################
pcp-5.2.2/qa/admin/check-vm-140- ret=1
pcp-5.2.2/qa/admin/check-vm:141: case `cat $tmp.compare`
pcp-5.2.2/qa/admin/check-vm-142- in
##############################################
pcp-5.2.2/qa/admin/check-vm-153- echo "Arrgh ... installed version $version, want $relop $specversion,"
pcp-5.2.2/qa/admin/check-vm:154: echo "but failed to extract relop (`cat $tmp.compare`)"
pcp-5.2.2/qa/admin/check-vm-155- ;;
##############################################
pcp-5.2.2/qa/admin/check-vm-327- then
pcp-5.2.2/qa/admin/check-vm:328: [ "`sum <"$1"`" = "`sum <"$2"`" ] && sts=0
pcp-5.2.2/qa/admin/check-vm-329- elif which stat >/dev/null 2>&1
##############################################
pcp-5.2.2/qa/admin/check-vm-350- _pkg="$1"
pcp-5.2.2/qa/admin/check-vm:351: _msg="`echo $2 | sed -e 's;/;\\\\/;g'`"
pcp-5.2.2/qa/admin/check-vm:352: _pkg_pat=`_safe_pattern "$_pkg"`
pcp-5.2.2/qa/admin/check-vm-353- sed <$tmp.manifest >$tmp.culled -e "/[[ ]$_pkg_pat[] ]/"'{
##############################################
pcp-5.2.2/qa/admin/check-vm-390-
pcp-5.2.2/qa/admin/check-vm:391: if [ `echo "$ipaddr" | wc -l | sed -e 's/ *//g'` -gt 1 ]
pcp-5.2.2/qa/admin/check-vm-392- then
##############################################
pcp-5.2.2/qa/admin/check-vm-468-#
pcp-5.2.2/qa/admin/check-vm:469:home=`echo $0 | sed -e 's/\/*check-vm$//'`
pcp-5.2.2/qa/admin/check-vm-470-if [ ! -f $home/whatami ]
##############################################
pcp-5.2.2/qa/admin/check-vm-573-done
pcp-5.2.2/qa/admin/check-vm:574:shift `expr $OPTIND - 1`
pcp-5.2.2/qa/admin/check-vm-575-[ $# -eq 0 ] || _usage
##############################################
pcp-5.2.2/qa/admin/check-vm-782- # Python 2.7.3
pcp-5.2.2/qa/admin/check-vm:783: eval `$PCP_PYTHON_PROG -V 2>&1 | sed -e 's/Python //' -e 's/^/maj=/' -e 's/\./ min=/' -e 's/\..*//'`
pcp-5.2.2/qa/admin/check-vm-784- if [ -n "$maj" -a -n "$min" ]
##############################################
pcp-5.2.2/qa/admin/check-vm-904-then
pcp-5.2.2/qa/admin/check-vm:905: unavail_pkg="`cat $tmp.pkgs`"
pcp-5.2.2/qa/admin/check-vm-906-fi
##############################################
pcp-5.2.2/qa/admin/check-vm-915-then
pcp-5.2.2/qa/admin/check-vm:916: $very_verbose && echo >&2 "require: `cat $tmp.pkgs`"
pcp-5.2.2/qa/admin/check-vm:917: for _need in `cat $tmp.pkgs`
pcp-5.2.2/qa/admin/check-vm-918- do
##############################################
pcp-5.2.2/qa/admin/check-vm-994-then
pcp-5.2.2/qa/admin/check-vm:995: $very_verbose && echo >&2 "skip: `cat $tmp.pkgs`"
pcp-5.2.2/qa/admin/check-vm:996: skip_pkg="$skip_pkg `cat $tmp.pkgs`"
pcp-5.2.2/qa/admin/check-vm:997: for _pkg in `cat $tmp.pkgs`
pcp-5.2.2/qa/admin/check-vm-998- do
##############################################
pcp-5.2.2/qa/admin/check-vm-1014- then
pcp-5.2.2/qa/admin/check-vm:1015: pyver=`$PCP_PYTHON_PROG --version 2>&1 | sed -e 's/^[^0-9]*//' -e 's/\..*//'`
pcp-5.2.2/qa/admin/check-vm-1016- if [ -z "$pyver" ]
pcp-5.2.2/qa/admin/check-vm-1017- then
pcp-5.2.2/qa/admin/check-vm:1018: echo >&2 "Warning: cannot get Python version from: `$PCP_PYTHON_PROG --version`"
pcp-5.2.2/qa/admin/check-vm-1019- else
##############################################
pcp-5.2.2/qa/admin/check-vm-1086- else
pcp-5.2.2/qa/admin/check-vm:1087: real_pkg="`grep "^$pkg\$" $tmp.allpkgs | LC_COLLATE=POSIZ sort -nr | head -1`"
pcp-5.2.2/qa/admin/check-vm-1088- if [ -n "$real_pkg" ]
##############################################
pcp-5.2.2/qa/admin/check-vm-1095- #
pcp-5.2.2/qa/admin/check-vm:1096: pkg_literal=`/bin/echo "$pkg" | sed -e 's/\[/\\\\[/g' -e 's/\*/\\\\*/g' -e 's/\./\\\\./g'`
pcp-5.2.2/qa/admin/check-vm-1097- /bin/echo 's/ '"$pkg_literal"' \(.*:'"$lineno"'\)$/ '"$real_pkg"' \1/' >>$tmp.sed
##############################################
pcp-5.2.2/qa/admin/check-vm-1160-do
pcp-5.2.2/qa/admin/check-vm:1161: apps=`echo "$line" | sed -e 's/:[0-9][0-9]*$//' -e 's/ $//'`
pcp-5.2.2/qa/admin/check-vm:1162: lineno=`echo "$line" | sed -e 's/.* :\([0-9][0-9]*\)$/\\1/'`
pcp-5.2.2/qa/admin/check-vm-1163- rm -f $tmp.ok
##############################################
pcp-5.2.2/qa/admin/check-vm-1177- !*)
pcp-5.2.2/qa/admin/check-vm:1178: app=`echo "$app" | sed -e 's/^!//'`
pcp-5.2.2/qa/admin/check-vm-1179- negate=true
##############################################
pcp-5.2.2/qa/admin/check-vm-1190- *\?)
pcp-5.2.2/qa/admin/check-vm:1191: app=`echo $app | sed -e 's/?$//'`
pcp-5.2.2/qa/admin/check-vm-1192- optional=true
##############################################
pcp-5.2.2/qa/admin/check-vm-1210- # special case Perl, no module name
pcp-5.2.2/qa/admin/check-vm:1211: echo "use `echo $app | sed -e 's/::$//'`;" | perl >/dev/null 2>&1
pcp-5.2.2/qa/admin/check-vm-1212- ok=$?
##############################################
pcp-5.2.2/qa/admin/check-vm-1221- rm -f $tmp.tmp
pcp-5.2.2/qa/admin/check-vm:1222: for obj in `echo "$app" | sed -e 's/|/ /g'`
pcp-5.2.2/qa/admin/check-vm-1223- do
##############################################
pcp-5.2.2/qa/admin/check-vm-1247- then
pcp-5.2.2/qa/admin/check-vm:1248: ok=`expr 1 - $ok`
pcp-5.2.2/qa/admin/check-vm-1249- fi
##############################################
pcp-5.2.2/qa/admin/check-vm-1331- [ -f $tmp.echo ] && echo >&2
pcp-5.2.2/qa/admin/check-vm:1332: echo >&2 "Warning: manifest:$lineno botch? target: \"`echo "$apps" | sed -e 's/[ ].*//'`\" not found, but package \"$_need\" already installed"
pcp-5.2.2/qa/admin/check-vm-1333- rm -f $tmp.echo
##############################################
pcp-5.2.2/qa/admin/check-vm-1352- then
pcp-5.2.2/qa/admin/check-vm:1353: _need_expand="`grep "^$_need\$" <$tmp.allpkgs`"
pcp-5.2.2/qa/admin/check-vm-1354- if [ -n "$_need_expand" ]
##############################################
pcp-5.2.2/qa/admin/check-vm-1395- [ -f $tmp.echo ] && echo >&2
pcp-5.2.2/qa/admin/check-vm:1396: echo >&2 "Warning: manifest:$lineno botch? target: \"`echo "$apps" | sed -e 's/[ ].*//'`\" found, but marked N/A"
pcp-5.2.2/qa/admin/check-vm-1397- rm -f $tmp.echo
##############################################
pcp-5.2.2/qa/admin/check-vm-1437- then
pcp-5.2.2/qa/admin/check-vm:1438: echo "sudo $installcmd `tr '\012' ' ' <$tmp.pkg`"
pcp-5.2.2/qa/admin/check-vm-1439- fi
##############################################
pcp-5.2.2/qa/admin/check-vm-1451- then
pcp-5.2.2/qa/admin/check-vm:1452: echo "sudo pip3 install `tr '\012' ' ' <$tmp.pkg`"
pcp-5.2.2/qa/admin/check-vm-1453- fi
##############################################
pcp-5.2.2/qa/admin/check-vm-1473-do
pcp-5.2.2/qa/admin/check-vm:1474: echo "Missing: $_pkg [required package not installed]"
pcp-5.2.2/qa/admin/check-vm-1475-done
##############################################
pcp-5.2.2/qa/admin/check-vm-1505- rm -f $tmp.found $tmp.notfound
pcp-5.2.2/qa/admin/check-vm:1506: for rpm in `echo "$rpmlist" | sed -e 's/|/ /g'`
pcp-5.2.2/qa/admin/check-vm-1507- do
##############################################
pcp-5.2.2/qa/admin/check-vm-1514- touch $tmp.found
pcp-5.2.2/qa/admin/check-vm:1515: version=`sed <$tmp.tmp -e "s/^$rpm-//" -e 's/-.*//'`
pcp-5.2.2/qa/admin/check-vm-1516- ( echo $version; echo $specversion ) | _compare $relop
##############################################
pcp-5.2.2/qa/admin/check-vm-1548- [ -n "$pcp_pkg" ] && pcp_pkg=" for $pcp_pkg"
pcp-5.2.2/qa/admin/check-vm:1549: libversion=`pkg-config --modversion "$lib" 2>/dev/null`
pcp-5.2.2/qa/admin/check-vm-1550- if [ -z "$libversion" ]
##############################################
pcp-5.2.2/qa/admin/ci-qa-summary-55-done
pcp-5.2.2/qa/admin/ci-qa-summary:56:shift `expr $OPTIND - 1`
pcp-5.2.2/qa/admin/ci-qa-summary-57-
##############################################
pcp-5.2.2/qa/admin/ci-qa-summary-70-then
pcp-5.2.2/qa/admin/ci-qa-summary:71: set -- `[ -d $base ] && cd $base && echo test-*`
pcp-5.2.2/qa/admin/ci-qa-summary-72-fi
##############################################
pcp-5.2.2/qa/admin/ci-qa-summary-90- else
pcp-5.2.2/qa/admin/ci-qa-summary:91: vmdir=`echo ${vm}*`
pcp-5.2.2/qa/admin/ci-qa-summary-92- if [ -d "$vmdir" ]
##############################################
pcp-5.2.2/qa/admin/ci-qa-summary-184- sed -e 's/|[^|]*$//' <$tmp.tmp | _what >>$tmp.found
pcp-5.2.2/qa/admin/ci-qa-summary:185: nfail=`awk <$tmp.tmp '{print $3}'`
pcp-5.2.2/qa/admin/ci-qa-summary-186- if [ $nfail -gt 0 ]
##############################################
pcp-5.2.2/qa/admin/ci-qa-summary-194- then
pcp-5.2.2/qa/admin/ci-qa-summary:195: nnotrun=`sed -e 's/|.*//' <$tmp.tmp | awk '{print $4}'`
pcp-5.2.2/qa/admin/ci-qa-summary-196- if [ $nnotrun -gt 0 ]
##############################################
pcp-5.2.2/qa/admin/ci-qa-summary-235- cat $tmp.found >>$tmp.counts
pcp-5.2.2/qa/admin/ci-qa-summary:236: numqahosts=`expr $numqahosts + 1`
pcp-5.2.2/qa/admin/ci-qa-summary-237- else
##############################################
pcp-5.2.2/qa/admin/ci-qa-summary-414- else
pcp-5.2.2/qa/admin/ci-qa-summary:415: num=`expr $num + 1`
pcp-5.2.2/qa/admin/ci-qa-summary-416- fi
##############################################
pcp-5.2.2/qa/admin/ci-show-me-all-94-then
pcp-5.2.2/qa/admin/ci-show-me-all:95: echo "Eh? no {`for seq do echo $seq; done | tr '\012' ',' | sed -e 's/,$//'`}.out.bad files found"
pcp-5.2.2/qa/admin/ci-show-me-all-96- exit 0
##############################################
pcp-5.2.2/qa/admin/ci-show-me-all-132- cd $dir
pcp-5.2.2/qa/admin/ci-show-me-all:133: sum=`shasum <$seq.out.bad | sed -e 's/ .*//'`
pcp-5.2.2/qa/admin/ci-show-me-all:134: match_dir=`grep " $seq $sum\$" $tmp.sum | sed -e 's/ .*//'`
pcp-5.2.2/qa/admin/ci-show-me-all-135- if [ -n "$match_dir" ]
##############################################
pcp-5.2.2/qa/admin/list-packages-39- # end
pcp-5.2.2/qa/admin/list-packages:40: [ -s $tmp.require ] && $very_verbose && echo >&2 "require: `cat $tmp.require`"
pcp-5.2.2/qa/admin/list-packages-41-
##############################################
pcp-5.2.2/qa/admin/list-packages-48- # end
pcp-5.2.2/qa/admin/list-packages:49: [ -s $tmp.skip ] && $very_verbose && echo >&2 "skip: `cat $tmp.skip`"
pcp-5.2.2/qa/admin/list-packages-50-
##############################################
pcp-5.2.2/qa/admin/list-packages-66-End-of-File
pcp-5.2.2/qa/admin/list-packages:67: tag=`sed -n <$tmp.tags -e 's/ / /g' -e 's/$/ /' -e "/ $distro /s/ .*//p"`
pcp-5.2.2/qa/admin/list-packages-68- if [ -z "$tag" ]
##############################################
pcp-5.2.2/qa/admin/list-packages-89- do
pcp-5.2.2/qa/admin/list-packages:90: for req_pkg in `cat $tmp.require`
pcp-5.2.2/qa/admin/list-packages-91- do
##############################################
pcp-5.2.2/qa/admin/list-packages-106- [ "$pkg" = "N/A" ] && continue
pcp-5.2.2/qa/admin/list-packages:107: pkg_re=`echo "$pkg" | sed -e 's;/;\\\\/;g'`
pcp-5.2.2/qa/admin/list-packages-108- if awk <$tmp.list '
##############################################
pcp-5.2.2/qa/admin/list-packages-114- #
pcp-5.2.2/qa/admin/list-packages:115: avail="`grep "^$pkg\$" <$tmp.allpkgs`"
pcp-5.2.2/qa/admin/list-packages-116- if [ -z "$avail" ]
##############################################
pcp-5.2.2/qa/admin/list-packages-124- rm -f $tmp.skipme
pcp-5.2.2/qa/admin/list-packages:125: for skip_pkg in `cat $tmp.skip`
pcp-5.2.2/qa/admin/list-packages-126- do
pcp-5.2.2/qa/admin/list-packages:127: skip_pkg_re=`echo "$skip_pkg" | sed -e 's;/;\\\\/;g'`
pcp-5.2.2/qa/admin/list-packages-128- if echo "$pkg" | awk '
##############################################
pcp-5.2.2/qa/admin/list-packages-141- then
pcp-5.2.2/qa/admin/list-packages:142: avail="`grep "^$pkg\$" <$tmp.allpkgs`"
pcp-5.2.2/qa/admin/list-packages-143- if [ -n "$avail" ]
##############################################
pcp-5.2.2/qa/admin/list-packages-159- #
pcp-5.2.2/qa/admin/list-packages:160: for pkg in `cat $tmp.require`
pcp-5.2.2/qa/admin/list-packages-161- do
##############################################
pcp-5.2.2/qa/admin/list-packages-174- do
pcp-5.2.2/qa/admin/list-packages:175: avail="`grep "^$pkg\$" <$tmp.allpkgs`"
pcp-5.2.2/qa/admin/list-packages-176- if [ -z "$avail" ]
##############################################
pcp-5.2.2/qa/admin/list-packages-245-done
pcp-5.2.2/qa/admin/list-packages:246:shift `expr $OPTIND - 1`
pcp-5.2.2/qa/admin/list-packages-247-[ $# -eq 0 ] || _usage
##############################################
pcp-5.2.2/qa/admin/list-packages-261-#
pcp-5.2.2/qa/admin/list-packages:262:home=`echo $0 | sed -e 's/\/*list-packages$//'`
pcp-5.2.2/qa/admin/list-packages-263-if [ ! -f $home/whatami ]
##############################################
pcp-5.2.2/qa/admin/list-packages-313- [ -s $tmp.found ] && break
pcp-5.2.2/qa/admin/list-packages:314: _check="`echo $_version | sed -e 's/\.[0-9][0-9]*$//'`"
pcp-5.2.2/qa/admin/list-packages-315- [ "$_check" = "$_version" ] && break
##############################################
pcp-5.2.2/qa/admin/list-packages-325- fi
pcp-5.2.2/qa/admin/list-packages:326: eval `cat $tmp.found`
pcp-5.2.2/qa/admin/list-packages-327- if $verbose
##############################################
pcp-5.2.2/qa/admin/list-packages-558- do
pcp-5.2.2/qa/admin/list-packages:559: pkg=`echo $full_pkg | sed -e 's;^.*/;;'`
pcp-5.2.2/qa/admin/list-packages-560- if grep "^$pkg\$" $tmp.installed >/dev/null
##############################################
pcp-5.2.2/qa/admin/myconfigure-30-done
pcp-5.2.2/qa/admin/myconfigure:31:shift `expr $OPTIND - 1`
pcp-5.2.2/qa/admin/myconfigure-32-[ $# -ne 0 ] && _usage
##############################################
pcp-5.2.2/qa/admin/myconfigure-102- export CXX=clang
pcp-5.2.2/qa/admin/myconfigure:103: configopts="`brew diy --version=$version --name=pcp`"
pcp-5.2.2/qa/admin/myconfigure-104-elif [ $target = netbsd ]
##############################################
pcp-5.2.2/qa/admin/myconfigure-225- then
pcp-5.2.2/qa/admin/myconfigure:226: mkdir -p `dirname "$tmp/$wa_file"`
pcp-5.2.2/qa/admin/myconfigure-227- # no rewrite for workarea file
##############################################
pcp-5.2.2/qa/admin/myconfigure-230- then
pcp-5.2.2/qa/admin/myconfigure:231: mkdir -p `dirname "$tmp/$pkg_file"`
pcp-5.2.2/qa/admin/myconfigure-232- # for package installed file, there are some known and
##############################################
pcp-5.2.2/qa/admin/package-lists/new-50-done
pcp-5.2.2/qa/admin/package-lists/new:51:shift `expr $OPTIND - 1`
pcp-5.2.2/qa/admin/package-lists/new-52-[ $# -eq 0 ] || _usage
##############################################
pcp-5.2.2/qa/admin/package-lists/new-66-#
pcp-5.2.2/qa/admin/package-lists/new:67:home=`echo $0 | sed -e 's/\/*new$//'`
pcp-5.2.2/qa/admin/package-lists/new:68:home=`cd $home/..; /bin/pwd`
pcp-5.2.2/qa/admin/package-lists/new-69-if [ ! -f $home/whatami ]
##############################################
pcp-5.2.2/qa/admin/packages.rc-42- | tr ' ' '\012' >$tmp.eval
pcp-5.2.2/qa/admin/packages.rc:43: [ "$very_verbose" = "true" ] && echo >&2 "Info: `tr '\012' ' ' <$tmp.eval`"
pcp-5.2.2/qa/admin/packages.rc:44: eval `cat $tmp.eval`
pcp-5.2.2/qa/admin/packages.rc-45- full_version="$version"
##############################################
pcp-5.2.2/qa/admin/pcp-daily-7-{
pcp-5.2.2/qa/admin/pcp-daily:8: echo >&2 "Usage: `basename $0` [options] vm ..."
pcp-5.2.2/qa/admin/pcp-daily-9- echo >&2 "options:"
##############################################
pcp-5.2.2/qa/admin/pcp-daily-180- then
pcp-5.2.2/qa/admin/pcp-daily:181: echo "Info: list-packages reports missing: `cat $tmp.tmp` " | tee -a $HOME/daily.log
pcp-5.2.2/qa/admin/pcp-daily-182- fi
##############################################
pcp-5.2.2/qa/admin/pcp-daily-290-then
pcp-5.2.2/qa/admin/pcp-daily:291: echo "Warning: `wc -l <$tmp.err | sed -e 's/ //g'` build errors/warnings" | tee -a $HOME/daily.log
pcp-5.2.2/qa/admin/pcp-daily-292- cat $tmp.err >>$HOME/daily.log
##############################################
pcp-5.2.2/qa/admin/pcp-daily-380-esac
pcp-5.2.2/qa/admin/pcp-daily:381:$notfound && case `echo pcp-$buildversion/build/rpm/pcp-[0-9]*.src.rpm`
pcp-5.2.2/qa/admin/pcp-daily-382-in
##############################################
pcp-5.2.2/qa/admin/pcp-daily-404- cd pcp-$buildversion/build/rpm
pcp-5.2.2/qa/admin/pcp-daily:405: if sudo rpm -U --force `./cherrypick 2>$tmp.err` >$tmp.out 2>&1
pcp-5.2.2/qa/admin/pcp-daily-406- then
##############################################
pcp-5.2.2/qa/admin/pcp-daily-595- echo \$bad >>\$HOME/daily.harvest
pcp-5.2.2/qa/admin/pcp-daily:596: nbad=\`expr \$nbad + 1\`
pcp-5.2.2/qa/admin/pcp-daily:597: seq=\`echo \$bad | sed -e 's/\.out\.bad//'\`
pcp-5.2.2/qa/admin/pcp-daily-598- [ -f \$seq.out ] && echo \$seq.out >>\$HOME/daily.harvest
##############################################
pcp-5.2.2/qa/admin/pcp-daily-601- echo \$seq.full >>\$HOME/daily.harvest
pcp-5.2.2/qa/admin/pcp-daily:602: nfull=\`expr \$nfull + 1\`
pcp-5.2.2/qa/admin/pcp-daily-603- fi
##############################################
pcp-5.2.2/qa/admin/pcp-daily-737-done
pcp-5.2.2/qa/admin/pcp-daily:738:shift `expr $OPTIND - 1`
pcp-5.2.2/qa/admin/pcp-daily-739-
##############################################
pcp-5.2.2/qa/admin/pcp-daily-815- fi
pcp-5.2.2/qa/admin/pcp-daily:816: count=`wc -l <$tmp.domain | sed -e 's/ //g'`
pcp-5.2.2/qa/admin/pcp-daily-817- if [ $count != 1 ]
##############################################
pcp-5.2.2/qa/admin/pcp-daily-822- fi
pcp-5.2.2/qa/admin/pcp-daily:823: domain=`sed -e 1q $tmp.domain`
pcp-5.2.2/qa/admin/pcp-daily-824- # used to be vmNN-osname&version, but now just vmNN ...
##############################################
pcp-5.2.2/qa/admin/pcp-daily-826- #
pcp-5.2.2/qa/admin/pcp-daily:827: host=`echo $domain | sed -e '/^vm/s/-.*//'`
pcp-5.2.2/qa/admin/pcp-daily-828- echo "::: $domain :::"
##############################################
pcp-5.2.2/qa/admin/pcp-daily-949- #
pcp-5.2.2/qa/admin/pcp-daily:950: state=`sudo virsh list --all | grep "$domain" | awk '{print $3}'`
pcp-5.2.2/qa/admin/pcp-daily-951- case "$state"
##############################################
pcp-5.2.2/qa/admin/pcp-daily-1011- sleep $delta
pcp-5.2.2/qa/admin/pcp-daily:1012: wait=`expr $wait + $delta`
pcp-5.2.2/qa/admin/pcp-daily-1013- done
##############################################
pcp-5.2.2/qa/admin/pcp-daily-1153- then
pcp-5.2.2/qa/admin/pcp-daily:1154: for file in `cat $tmp.harvest`
pcp-5.2.2/qa/admin/pcp-daily-1155- do
##############################################
pcp-5.2.2/qa/admin/qa-summary-78-done
pcp-5.2.2/qa/admin/qa-summary:79:shift `expr $OPTIND - 1`
pcp-5.2.2/qa/admin/qa-summary-80-
##############################################
pcp-5.2.2/qa/admin/qa-summary-93-then
pcp-5.2.2/qa/admin/qa-summary:94: set -- `[ -d $HOME/Logs/by-vm ] && cd $HOME/Logs/by-vm && echo *`
pcp-5.2.2/qa/admin/qa-summary-95-fi
##############################################
pcp-5.2.2/qa/admin/qa-summary-154- else
pcp-5.2.2/qa/admin/qa-summary:155: vmdir=`echo ${vm}*`
pcp-5.2.2/qa/admin/qa-summary-156- if [ -d "$vmdir" ]
##############################################
pcp-5.2.2/qa/admin/qa-summary-163- fi
pcp-5.2.2/qa/admin/qa-summary:164: basevmname=`echo $vmdir | sed -e 's/\(vm[0-9][0-9]\)-.*/\1/' -e 's/\.sgi.com//'`
pcp-5.2.2/qa/admin/qa-summary-165- rm -f $tmp.seen $tmp.found
##############################################
pcp-5.2.2/qa/admin/qa-summary-256- sed -e 's/|[^|]*$//' <$tmp.tmp | _what >>$tmp.found
pcp-5.2.2/qa/admin/qa-summary:257: nfail=`awk <$tmp.tmp '{print $4}'`
pcp-5.2.2/qa/admin/qa-summary-258- if [ $nfail -gt 0 ]
##############################################
pcp-5.2.2/qa/admin/qa-summary-266- then
pcp-5.2.2/qa/admin/qa-summary:267: nnotrun=`sed -e 's/|.*//' <$tmp.tmp | awk '{print $5}'`
pcp-5.2.2/qa/admin/qa-summary-268- if [ $nnotrun -gt 0 ]
##############################################
pcp-5.2.2/qa/admin/qa-summary-307- cat $tmp.found >>$tmp.counts
pcp-5.2.2/qa/admin/qa-summary:308: numqahosts=`expr $numqahosts + 1`
pcp-5.2.2/qa/admin/qa-summary-309- else
##############################################
pcp-5.2.2/qa/admin/qa-summary-486- else
pcp-5.2.2/qa/admin/qa-summary:487: num=`expr $num + 1`
pcp-5.2.2/qa/admin/qa-summary-488- fi
##############################################
pcp-5.2.2/qa/admin/show-me-all-52-done
pcp-5.2.2/qa/admin/show-me-all:53:shift `expr $OPTIND - 1`
pcp-5.2.2/qa/admin/show-me-all-54-if $prepare_mail && [ $# -ne 1 ]
##############################################
pcp-5.2.2/qa/admin/show-me-all-100- cd $here
pcp-5.2.2/qa/admin/show-me-all:101: sum=`shasum <$bad | sed -e 's/ .*//'`
pcp-5.2.2/qa/admin/show-me-all:102: host=`echo "$bad" | sed -e 's/\/.*//'`
pcp-5.2.2/qa/admin/show-me-all:103: if [ ! -d `dirname $bad` ]
pcp-5.2.2/qa/admin/show-me-all-104- then
pcp-5.2.2/qa/admin/show-me-all:105: echo "Arrgh: bad=$bad but dir=`dirname $bad` is not a directory!"
pcp-5.2.2/qa/admin/show-me-all-106- exit
pcp-5.2.2/qa/admin/show-me-all-107- fi
pcp-5.2.2/qa/admin/show-me-all:108: cd `dirname $bad`
pcp-5.2.2/qa/admin/show-me-all-109- rm -f $tmp.ok
##############################################
pcp-5.2.2/qa/admin/show-me-all-137- then
pcp-5.2.2/qa/admin/show-me-all:138: match_host=`grep " $sum" <$tmp.sum | sed -e 's/ .*//' -e 1q`
pcp-5.2.2/qa/admin/show-me-all-139- echo "$host: same $seq.out.bad as $match_host"
##############################################
pcp-5.2.2/qa/admin/show-me-all-180- [ -z "$host" ] && continue
pcp-5.2.2/qa/admin/show-me-all:181: myvar=`grep " $sum\$" $tmp.map | sed -e 's/ .*//'`
pcp-5.2.2/qa/admin/show-me-all-182- if [ -z "$myvar" ]
##############################################
pcp-5.2.2/qa/admin/show-me-all-186- echo "$var $sum" >>$tmp.map
pcp-5.2.2/qa/admin/show-me-all:187: var=`expr $var + 1`
pcp-5.2.2/qa/admin/show-me-all-188- fi
##############################################
pcp-5.2.2/qa/admin/show-me-all-191- then
pcp-5.2.2/qa/admin/show-me-all:192: myhost=`grep "^$host " $HOME/whatami.out`
pcp-5.2.2/qa/admin/show-me-all-193- fi
##############################################
pcp-5.2.2/qa/admin/show-me-all-206- echo
pcp-5.2.2/qa/admin/show-me-all:207: numvar=`echo /tmp/show-me-all/$seq.out.bad-* | wc -w | sed -e 's/ */ /g'`
pcp-5.2.2/qa/admin/show-me-all-208- if [ "$numvar" -gt 1 ]
##############################################
pcp-5.2.2/qa/admin/show-me-all-216- echo
pcp-5.2.2/qa/admin/show-me-all:217: echo "Attachments: `echo /tmp/show-me-all/$seq.out.bad-*`"
pcp-5.2.2/qa/admin/show-me-all-218- else
##############################################
pcp-5.2.2/qa/admin/whatami-114-}'`
pcp-5.2.2/qa/admin/whatami:115: name=`echo "$name" | sed -e 's/"//g'`
pcp-5.2.2/qa/admin/whatami-116- ver=`sed </etc/os-release -n -e '/^VERSION *= */{
##############################################
pcp-5.2.2/qa/admin/whatami-155- then
pcp-5.2.2/qa/admin/whatami:156: pcpver=`sed <$tmp.out -e 's/"$//' -e 's/.*"//'`
pcp-5.2.2/qa/admin/whatami-157- fi
##############################################
pcp-5.2.2/qa/admin/whatami-167- then
pcp-5.2.2/qa/admin/whatami:168: opts="$opts `sed -e 's/Python /py=/' <$tmp.out`"
pcp-5.2.2/qa/admin/whatami-169- else
##############################################
pcp-5.2.2/qa/admin/whatami-180-fi
pcp-5.2.2/qa/admin/whatami:181:opts=" [`echo $opts | sed -e 's/^ //'`]"
pcp-5.2.2/qa/admin/whatami-182-
##############################################
pcp-5.2.2/qa/archives/mk.mirage-30- pmstore sample.many.count $i
pcp-5.2.2/qa/archives/mk.mirage:31: i=`expr $i + 1`
pcp-5.2.2/qa/archives/mk.mirage-32-done
##############################################
pcp-5.2.2/qa/archives/mk.multihost-48- date >/dev/null 2>&1 &
pcp-5.2.2/qa/archives/mk.multihost:49: n=`echo $! | awk '{ srand($1); print int(rand()*5)+1 }'`
pcp-5.2.2/qa/archives/mk.multihost-50- echo "$host: prime with $n samples"
##############################################
pcp-5.2.2/qa/archives/mk.mysql-20-do
pcp-5.2.2/qa/archives/mk.mysql:21: version=`expr $version + 1`
pcp-5.2.2/qa/archives/mk.mysql-22-done
##############################################
pcp-5.2.2/qa/archives/mk.nfsclient-14-
pcp-5.2.2/qa/archives/mk.nfsclient:15:check=`pmprobe -v nfsclient.export | $PCP_AWK_PROG '{print $NF}'`
pcp-5.2.2/qa/archives/mk.nfsclient-16-if [ "$check" -lt 0 ]
##############################################
pcp-5.2.2/qa/archives/mk.numa-13-
pcp-5.2.2/qa/archives/mk.numa:14:nnode=`pmprobe -v hinv.nnode | $PCP_AWK_PROG '{print $NF}'`
pcp-5.2.2/qa/archives/mk.numa-15-if [ -z "$nnode" -o "$nnode" -lt 2 ]
##############################################
pcp-5.2.2/qa/archives/mk.proc-9-
pcp-5.2.2/qa/archives/mk.proc:10:pmcd_pid=`$PCP_PS_PROG $PCP_PS_ALL_FLAGS | grep '[p]mcd' | $PCP_AWK_PROG '{ print $2 }'`
pcp-5.2.2/qa/archives/mk.proc-11-if [ -z "$pmcd_pid" ]
##############################################
pcp-5.2.2/qa/archives/mk.proc-16-
pcp-5.2.2/qa/archives/mk.proc:17:pmlogger_pid=`$PCP_PS_PROG $PCP_PS_ALL_FLAGS | grep '[p]mlogger -P' | $PCP_AWK_PROG '{ print $2 }'`
pcp-5.2.2/qa/archives/mk.proc-18-if [ -z "$pmlogger_pid" ]
##############################################
pcp-5.2.2/qa/bad-by-group-13- [ "$f" = "*.out.bad" ] && break
pcp-5.2.2/qa/bad-by-group:14: seq=`echo $f | sed -e 's/.out.bad$//'`
pcp-5.2.2/qa/bad-by-group-15- grep "^$seq[ :]" group \
##############################################
pcp-5.2.2/qa/badarchives/mk.badlabel-16- [ ! -f badlabel-$X.index ] && break
pcp-5.2.2/qa/badarchives/mk.badlabel:17: X=`expr $X + 1`
pcp-5.2.2/qa/badarchives/mk.badlabel-18- if [ $X -eq 100 ]
##############################################
pcp-5.2.2/qa/badarchives/mk.badlabel-86- else
pcp-5.2.2/qa/badarchives/mk.badlabel:87: target=`echo $file | sed -e "s/-$X\./-0./"`
pcp-5.2.2/qa/badarchives/mk.badlabel-88- if ln $target $file
##############################################
pcp-5.2.2/qa/badarchives/mk.badlen-16- [ ! -f badlen-$X.index ] && break
pcp-5.2.2/qa/badarchives/mk.badlen:17: X=`expr $X + 1`
pcp-5.2.2/qa/badarchives/mk.badlen-18- if [ $X -eq 100 ]
##############################################
pcp-5.2.2/qa/badarchives/mk.badlog-22- else
pcp-5.2.2/qa/badarchives/mk.badlog:23: X=`expr $X + 1`
pcp-5.2.2/qa/badarchives/mk.badlog-24- fi
##############################################
pcp-5.2.2/qa/badarchives/mk.badlog-145- else
pcp-5.2.2/qa/badarchives/mk.badlog:146: target=`echo $file | sed -e "s/badlog-$X/.\/ok-foo/"`
pcp-5.2.2/qa/badarchives/mk.badlog-147- if cp $target $file
##############################################
pcp-5.2.2/qa/badarchives/mk.badmeta-60- else
pcp-5.2.2/qa/badarchives/mk.badmeta:61: X=`expr $X + 1`
pcp-5.2.2/qa/badarchives/mk.badmeta-62- fi
##############################################
pcp-5.2.2/qa/badarchives/mk.badmeta-120- else
pcp-5.2.2/qa/badarchives/mk.badmeta:121: target=`echo $file | sed -e "s/badmeta-$X\./.\/ok-foo./"`
pcp-5.2.2/qa/badarchives/mk.badmeta-122- if cp $target $file
##############################################
pcp-5.2.2/qa/badarchives/mk.badti-30- else
pcp-5.2.2/qa/badarchives/mk.badti:31: X=`expr $X + 1`
pcp-5.2.2/qa/badarchives/mk.badti-32- fi
##############################################
pcp-5.2.2/qa/badarchives/mk.badti-119- else
pcp-5.2.2/qa/badarchives/mk.badti:120: target=`echo $file | sed -e "s/badti-$X\./.\/ok-foo./"`
pcp-5.2.2/qa/badarchives/mk.badti-121- if cp $target $file
##############################################
pcp-5.2.2/qa/check-16-aborted=true
pcp-5.2.2/qa/check:17:myname=`basename $0`
pcp-5.2.2/qa/check-18-iam=$myname # a synonym
##############################################
pcp-5.2.2/qa/check-38- then
pcp-5.2.2/qa/check:39: LOCKOWNER=`cat "$CHECKLOCK" 2>/dev/null` || return 0
pcp-5.2.2/qa/check-40- [ "$LOCKOWNER" = "$mypid" ] && rm -f "$CHECKLOCK"
##############################################
pcp-5.2.2/qa/check-139- [ ! -f "$CHECKLOCK" ] && return 0
pcp-5.2.2/qa/check:140: PID=`cat "$CHECKLOCK" 2>/dev/null` || return 0
pcp-5.2.2/qa/check-141-
##############################################
pcp-5.2.2/qa/check-185- then
pcp-5.2.2/qa/check:186: LOCKOWNER=`cat "$CHECKLOCK" 2>/dev/null` || continue
pcp-5.2.2/qa/check-187-
##############################################
pcp-5.2.2/qa/check-253- chmod a+w $tmp/checksums
pcp-5.2.2/qa/check:254: for f in `cat $tmp.checkfiles`
pcp-5.2.2/qa/check-255- do
pcp-5.2.2/qa/check:256: buf=`echo $f | sed -e 's;/;+;g'`
pcp-5.2.2/qa/check-257- buf=$tmp/checksums/$buf
##############################################
pcp-5.2.2/qa/check-263- check)
pcp-5.2.2/qa/check:264: for f in `cat $tmp.checkfiles`
pcp-5.2.2/qa/check-265- do
pcp-5.2.2/qa/check:266: buf=`echo $f | sed -e 's;/;+;g'`
pcp-5.2.2/qa/check-267- buf=$tmp/checksums/$buf
##############################################
pcp-5.2.2/qa/check-275- else
pcp-5.2.2/qa/check:276: _cs=`sum $f`
pcp-5.2.2/qa/check-277- if fgrep "$_cs" $2 >/dev/null 2>&1
##############################################
pcp-5.2.2/qa/check-317-
pcp-5.2.2/qa/check:318:torun=`echo $list | wc -w | sed -e 's/ //g'`
pcp-5.2.2/qa/check-319-haverun=0
##############################################
pcp-5.2.2/qa/check-338- then
pcp-5.2.2/qa/check:339: pct=`expr 100 \* $haverun / $torun`
pcp-5.2.2/qa/check:340: haverun=`expr $haverun + 1`
pcp-5.2.2/qa/check-341- $PCP_ECHO_PROG $PCP_ECHO_N "[$pct%] ""$PCP_ECHO_C"
##############################################
pcp-5.2.2/qa/check-352- rm -f $seq.full
pcp-5.2.2/qa/check:353: lasttime=`sed -n -e "/^$seq /s/.* //p" <check.time`
pcp-5.2.2/qa/check-354- [ "X$lasttime" != X ] && $PCP_ECHO_PROG $PCP_ECHO_N " ${lasttime}s ...""$PCP_ECHO_C"
##############################################
pcp-5.2.2/qa/check-413- [ $color = true ] && tput bold && tput setaf 4 # blue
pcp-5.2.2/qa/check:414: echo " [not run] `cat $seq.notrun`"
pcp-5.2.2/qa/check-415- [ $color = true ] && tput sgr0 # reset
##############################################
pcp-5.2.2/qa/check-525- else
pcp-5.2.2/qa/check:526: echo "$seq `expr $stop - $start`" >>$tmp.time
pcp-5.2.2/qa/check-527- fi
##############################################
pcp-5.2.2/qa/check-539- bad="$bad $seq"
pcp-5.2.2/qa/check:540: n_bad=`expr $n_bad + 1`
pcp-5.2.2/qa/check-541- quick=false
##############################################
pcp-5.2.2/qa/check-545- fi
pcp-5.2.2/qa/check:546: [ -f $seq.notrun ] || try=`expr $try + 1`
pcp-5.2.2/qa/check-547- rm -f $seq.notrun
##############################################
pcp-5.2.2/qa/check-flakey-30- #
pcp-5.2.2/qa/check-flakey:31: _seq=`echo "$seq" | sed -e 's/^0*//'`
pcp-5.2.2/qa/check-flakey-32- if [ "$_seq" -gt 999 ]
##############################################
pcp-5.2.2/qa/check-flakey-84- then
pcp-5.2.2/qa/check-flakey:85: xpect=`sed -n <check.time -e "/^$seq /s/.* //p"`
pcp-5.2.2/qa/check-flakey-86- fi
##############################################
pcp-5.2.2/qa/check-group-111- ( grep -v '^#' $seq \
pcp-5.2.2/qa/check-group:112: | egrep "(^[ ]*$1([ '\"]|$))|([ '\"\`]$1([ '\"\`]|$))" >$tmp.debug \
pcp-5.2.2/qa/check-group-113- ) && echo $seq >>$tmp.tmp
pcp-5.2.2/qa/check-group:114: group_list="`echo $1 | sed -e 's/-/ /'`"
pcp-5.2.2/qa/check-group-115- ;;
##############################################
pcp-5.2.2/qa/check-group-122- ( grep -v '^#' $seq \
pcp-5.2.2/qa/check-group:123: | egrep "(^[ ]*$1([ '\"]|$))|([ '\"\`]$1([ '\"\`]|$))" >$tmp.debug \
pcp-5.2.2/qa/check-group-124- ) && echo $seq >>$tmp.tmp
##############################################
pcp-5.2.2/qa/check-group-161- done >$tmp.tmp
pcp-5.2.2/qa/check-group:162: xpect="`echo $group_list | wc -w | sed -e 's/ //g'`"
pcp-5.2.2/qa/check-group-163- sort $tmp.tmp \
##############################################
pcp-5.2.2/qa/check-group-189-comm -12 $tmp.scripts $tmp.group >$tmp.tmp
pcp-5.2.2/qa/check-group:190:echo "$report_group in group and QA scripts `wc -l <$tmp.tmp | sed -e 's/ //g'` times"
##############################################
pcp-5.2.2/qa/check.app.ok-40-
pcp-5.2.2/qa/check.app.ok:41: seqs=`egrep -l "src/$app( |$)" [0-9][0-9]*[0-9] | tr '\012' ' ' | sed -e 's/ *$//'`
pcp-5.2.2/qa/check.app.ok-42-
##############################################
pcp-5.2.2/qa/check.callback.sample-77- $sudo egrep '^type=(AVC|SELINUX).*pcp' $audit >$1.pre-avc 2>/dev/null
pcp-5.2.2/qa/check.callback.sample:78: echo "before `wc -l <$1.pre-avc` AVC errors"
pcp-5.2.2/qa/check.callback.sample-79- echo "--- end pre-check ---"
##############################################
pcp-5.2.2/qa/check.callback.sample-237- cat $tmp.out
pcp-5.2.2/qa/check.callback.sample:238: echo "after `wc -l <$1.post-avc` AVC errors"
pcp-5.2.2/qa/check.callback.sample-239- $abort && status=1
##############################################
pcp-5.2.2/qa/chk.setup-31- do
pcp-5.2.2/qa/chk.setup:32: _sts=`pmprobe -n $PCP_VAR_DIR/pmns/root_pmcd -h $_host pmcd.numclients 2>/dev/null | $PCP_AWK_PROG '{print $2}'`
pcp-5.2.2/qa/chk.setup-33- if [ "${_sts:-0}" -gt 0 ]
##############################################
pcp-5.2.2/qa/chk.setup-40- sleep 1
pcp-5.2.2/qa/chk.setup:41: _i=`expr $_i + 1`
pcp-5.2.2/qa/chk.setup-42- done
##############################################
pcp-5.2.2/qa/chk.setup-77- then
pcp-5.2.2/qa/chk.setup:78: echo "missing - `cat $tmp.bad`"
pcp-5.2.2/qa/chk.setup-79- else
##############################################
pcp-5.2.2/qa/chk.setup-183- # strip args if any
pcp-5.2.2/qa/chk.setup:184: prog=`echo $prog | sed -e 's/ .*//'`
pcp-5.2.2/qa/chk.setup-185- if [ -z "$prog" ]
##############################################
pcp-5.2.2/qa/chk.setup-342- ssh pcpqa@$host rm -f chk.hullo >>$tmp.out 2>&1
pcp-5.2.2/qa/chk.setup:343: if [ "`cat $tmp.ans`" = "`cat $tmp.hullo`" ]
pcp-5.2.2/qa/chk.setup-344- then
##############################################
pcp-5.2.2/qa/chk.setup-348- touch $tmp.fail
pcp-5.2.2/qa/chk.setup:349: echo "Expected output: \"`cat $tmp.hullo`\""
pcp-5.2.2/qa/chk.setup:350: echo "Actual output: \"`cat $tmp.ans`\""
pcp-5.2.2/qa/chk.setup-351- echo "Diagnostic Log:"
##############################################
pcp-5.2.2/qa/common-35- $PCP_LOG_DIR/pmcd/*)
pcp-5.2.2/qa/common:36: __try=`echo $log | sed -e "s;/pmcd/;/;"`
pcp-5.2.2/qa/common-37- ;;
pcp-5.2.2/qa/common-38- *)
pcp-5.2.2/qa/common:39: __try=`echo $log | sed -e "s;$PCP_LOG_DIR/;$PCP_LOG_DIR/pmcd/;"`
pcp-5.2.2/qa/common-40- ;;
##############################################
pcp-5.2.2/qa/common-60- then
pcp-5.2.2/qa/common:61: setuid=`$sudo id | sed -e 's/(.*//' -e 's/.*=//'`
pcp-5.2.2/qa/common-62- if [ "$setuid" != 0 ]
##############################################
pcp-5.2.2/qa/common-280- do
pcp-5.2.2/qa/common:281: bit=`pminfo -h $QA_HOST -f pmcd.control.$trace | sed -n -e '/value/s/ *value *//p'`
pcp-5.2.2/qa/common-282- if [ "X$bit" != X1 ]
##############################################
pcp-5.2.2/qa/common-354- ${MAKE:-make} -f GNUmakefile.install >>/tmp/$$.make 2>&1
pcp-5.2.2/qa/common:355: _sts=`expr $? + $_sts`
pcp-5.2.2/qa/common-356- ( cd qt; ./setup-executables )
##############################################
pcp-5.2.2/qa/common-471- echo "/^$t\$/d" >>$tmp.sed
pcp-5.2.2/qa/common:472: numsed=`expr $numsed + 1`
pcp-5.2.2/qa/common-473- done
##############################################
pcp-5.2.2/qa/common-491-
pcp-5.2.2/qa/common:492: for t in `echo "$r" | sed -e 's/,/ /g'`
pcp-5.2.2/qa/common-493- do
##############################################
pcp-5.2.2/qa/common-671- [0-9]*-[0-9]*)
pcp-5.2.2/qa/common:672: eval `echo $r | sed -e 's/^/start=/' -e 's/-/ end=/'`
pcp-5.2.2/qa/common-673- range=true
##############################################
pcp-5.2.2/qa/common-676- [0-9]*-)
pcp-5.2.2/qa/common:677: eval `echo $r | sed -e 's/^/start=/' -e 's/-//'`
pcp-5.2.2/qa/common:678: end=`echo [0-9][0-9][0-9] [0-9][0-9][0-9][0-9] | sed -e 's/\[0-9]//g' -e 's/ *$//' -e 's/.* //'`
pcp-5.2.2/qa/common-679- if [ -z "$end" ]
##############################################
pcp-5.2.2/qa/common-702- then
pcp-5.2.2/qa/common:703: start=`echo $start | sed -e 's/^0*\(.\)/\1/'`
pcp-5.2.2/qa/common:704: end=`echo $end | sed -e 's/^0*\(.\)/\1/'`
pcp-5.2.2/qa/common-705- have_test_arg=true
##############################################
pcp-5.2.2/qa/common-805-
pcp-5.2.2/qa/common:806:list=`sort -n $tmp.list`
pcp-5.2.2/qa/common-807-rm -f $tmp.list $tmp.tmp $tmp.sed $tmp.exclude
##############################################
pcp-5.2.2/qa/common-830- $sudo rm -f $tmp.ok
pcp-5.2.2/qa/common:831: x=`pminfo -h $QA_HOST -v pmcd.control.timeout 2>&1`
pcp-5.2.2/qa/common-832- if [ -n "$x" ]
##############################################
pcp-5.2.2/qa/common-850- export PCPQA_SYSTEMD=$SAVE_PCPQA_SYSTEMD
pcp-5.2.2/qa/common:851: x=`pminfo -h $QA_HOST -v pmcd.control.timeout 2>&1`
pcp-5.2.2/qa/common-852- [ -z "$x" ] && touch $tmp.ok
##############################################
pcp-5.2.2/qa/common-932- do
pcp-5.2.2/qa/common:933: prot=`ls -ldL "$x" | sed -e 's/[ ].*//'`
pcp-5.2.2/qa/common-934- case $prot
##############################################
pcp-5.2.2/qa/common-941- esac
pcp-5.2.2/qa/common:942: x=`dirname $x`
pcp-5.2.2/qa/common-943- done
##############################################
pcp-5.2.2/qa/common.avahi-26- echo "avahi_cleanup: before pmsignal" >>$seq.full
pcp-5.2.2/qa/common.avahi:27: grep_service=`echo "$service" | sed -e 's/./[&]/'`
pcp-5.2.2/qa/common.avahi-28- $PCP_PS_PROG $PCP_PS_ALL_FLAGS | egrep '[P]ID|$grep_service |$grep_service$' >>$seq.full
##############################################
pcp-5.2.2/qa/common.bcc-87- sleep 1
pcp-5.2.2/qa/common.bcc:88: i=`expr $i + 1`
pcp-5.2.2/qa/common.bcc-89- done
##############################################
pcp-5.2.2/qa/common.bcc-118- #
pcp-5.2.2/qa/common.bcc:119: echo "_pmdabcc_wait_for_metric: Botch: bcc PMDA ready but metric $metric returns numval $numval (`pmerr $numval`)"
pcp-5.2.2/qa/common.bcc-120- fi
##############################################
pcp-5.2.2/qa/common.bcc-131- sleep 1
pcp-5.2.2/qa/common.bcc:132: i=`expr $i + 1`
pcp-5.2.2/qa/common.bcc-133- done
##############################################
pcp-5.2.2/qa/common.bcc-194-
pcp-5.2.2/qa/common.bcc:195: java_version=`java -version 2>&1 | awk '/version/ { print $3 }'`
pcp-5.2.2/qa/common.bcc:196: java_version=`echo $java_version | tr -d '"' | sed -e 's,_.*,,'`
pcp-5.2.2/qa/common.bcc:197: java_major=`echo $java_version | sed -e 's,\..*,,g'`
pcp-5.2.2/qa/common.bcc-198-
##############################################
pcp-5.2.2/qa/common.check-30- echo $@ >$here/$seq.notrun
pcp-5.2.2/qa/common.check:31: echo "$seq: [not run] `cat $here/$seq.notrun`"
pcp-5.2.2/qa/common.check-32- rm -f $here/$seq.pre-avc
##############################################
pcp-5.2.2/qa/common.check-83- darwin)
pcp-5.2.2/qa/common.check:84: free=`df -m . | $PCP_AWK_PROG 'NR == 2 { print $4 }'`
pcp-5.2.2/qa/common.check-85- ;;
pcp-5.2.2/qa/common.check-86- *)
pcp-5.2.2/qa/common.check:87: free=`df -mP . | $PCP_AWK_PROG 'NR == 2 { print $4 }'`
pcp-5.2.2/qa/common.check-88- ;;
##############################################
pcp-5.2.2/qa/common.check-312- # X warnings, Y metrics and Z values
pcp-5.2.2/qa/common.check:313: num_warn=`sed -n -e '/warnings/s/ .*//p' < $tmp.fetch`
pcp-5.2.2/qa/common.check-314- if [ "$num_warn" -gt 0 ]
##############################################
pcp-5.2.2/qa/common.check-389- echo cpu$__cpu 0 0 0 0 0 0 0 0 0 >> $__path
pcp-5.2.2/qa/common.check:390: __cpu=`expr $__cpu + 1`
pcp-5.2.2/qa/common.check-391- done
##############################################
pcp-5.2.2/qa/common.check-453-
pcp-5.2.2/qa/common.check:454:_host_to_ipaddr()
pcp-5.2.2/qa/common.check-455-{
##############################################
pcp-5.2.2/qa/common.check-468- if (defined $iaddr) {
pcp-5.2.2/qa/common.check:469: my $name = gethostbyaddr($iaddr, AF_INET);
pcp-5.2.2/qa/common.check-470- print $name;
##############################################
pcp-5.2.2/qa/common.check-560-{
pcp-5.2.2/qa/common.check:561: numval=`pmprobe $1 | cut -f 2 -d ' '`
pcp-5.2.2/qa/common.check-562- case "$numval"
##############################################
pcp-5.2.2/qa/common.check-569- *)
pcp-5.2.2/qa/common.check:570: echo "_need_metric: unexpected output: `pmprobe $1`"
pcp-5.2.2/qa/common.check-571- ;;
##############################################
pcp-5.2.2/qa/common.check-600- #debug# pmprobe -n $PCP_VAR_DIR/pmns/root_pmcd $_host_opt pmcd.numclients
pcp-5.2.2/qa/common.check:601: _sts=`pmprobe -n $PCP_VAR_DIR/pmns/root_pmcd $_host_opt pmcd.numclients 2>>$tmp._wait_for_pmcd.err | tee -a $tmp._wait_for_pmcd.out | $PCP_AWK_PROG '{print $2}'`
pcp-5.2.2/qa/common.check-602- if [ "${_sts:-0}" -gt 0 ]
##############################################
pcp-5.2.2/qa/common.check-609- sleep 1
pcp-5.2.2/qa/common.check:610: _i=`expr $_i + 1`
pcp-5.2.2/qa/common.check-611- done
##############################################
pcp-5.2.2/qa/common.check-670- sleep 1
pcp-5.2.2/qa/common.check:671: _i=`expr $_i + 1`
pcp-5.2.2/qa/common.check-672- done
##############################################
pcp-5.2.2/qa/common.check-749- sleep 1
pcp-5.2.2/qa/common.check:750: _i=`expr $_i + 1`
pcp-5.2.2/qa/common.check-751- else
##############################################
pcp-5.2.2/qa/common.check-783- then
pcp-5.2.2/qa/common.check:784: _pmcdhost=`cat $tmp._wait_for_pmlogger.host`
pcp-5.2.2/qa/common.check-785- echo "pmcd log ($_pmcdhost:$PCP_LOG_DIR/pmcd/pmcd.log) ..."
##############################################
pcp-5.2.2/qa/common.check-808- fi
pcp-5.2.2/qa/common.check:809: base=`cat $_logfile | sed -n '/^Archive basename:[ ]*/s///p'`
pcp-5.2.2/qa/common.check-810- if [ -n "$base" -a -f $base.0 ]
##############################################
pcp-5.2.2/qa/common.check-813- pmdumplog -l $base.0
pcp-5.2.2/qa/common.check:814: nres=`pmdumplog $base.0 | grep '^[0-9]' | wc -l | sed -e 's/ //g'`
pcp-5.2.2/qa/common.check-815- echo "archive contains $nres records"
##############################################
pcp-5.2.2/qa/common.check-822- do
pcp-5.2.2/qa/common.check:823: if [ "`echo $map`" = "$PCP_TMP_DIR"'/pmlogger/*' ]
pcp-5.2.2/qa/common.check-824- then
##############################################
pcp-5.2.2/qa/common.check-859- $sudo -u $__user sh $tmp.cmd $@ >$tmp.pid
pcp-5.2.2/qa/common.check:860: eval `cat $tmp.pid`
pcp-5.2.2/qa/common.check-861-}
##############################################
pcp-5.2.2/qa/common.check-882- then
pcp-5.2.2/qa/common.check:883: _i=`expr $_i + 1`
pcp-5.2.2/qa/common.check-884- if [ "$_i" -ge 100 ]
##############################################
pcp-5.2.2/qa/common.check-903- # process still exists
pcp-5.2.2/qa/common.check:904: _i=`expr $_i + 1`
pcp-5.2.2/qa/common.check-905- if [ "$_i" -ge 100 ]
##############################################
pcp-5.2.2/qa/common.check-919- else
pcp-5.2.2/qa/common.check:920: $PCP_PS_PROG $PCP_PS_ALL_FLAGS -p $_pid `cat $tmp.pmlogger.defunct`
pcp-5.2.2/qa/common.check-921- fi
##############################################
pcp-5.2.2/qa/common.check-944-
pcp-5.2.2/qa/common.check:945: _pid=`cat $PCP_RUN_DIR/pmcd.pid 2>/dev/null`
pcp-5.2.2/qa/common.check-946- if [ -z "$_pid" ]
##############################################
pcp-5.2.2/qa/common.check-969- # process still exists
pcp-5.2.2/qa/common.check:970: _i=`expr $_i + 1`
pcp-5.2.2/qa/common.check-971- if [ "$_i" -ge 100 ]
##############################################
pcp-5.2.2/qa/common.check-997- # process not started yet ...
pcp-5.2.2/qa/common.check:998: _i=`expr $_i + 1`
pcp-5.2.2/qa/common.check-999- if [ "$_i" -ge 100 ]
##############################################
pcp-5.2.2/qa/common.check-1019-
pcp-5.2.2/qa/common.check:1020: _pidlist=`cat $PCP_RUN_DIR/pmie.pid 2>/dev/null`
pcp-5.2.2/qa/common.check-1021- if [ -z "$_pidlist" ]
##############################################
pcp-5.2.2/qa/common.check-1053- then
pcp-5.2.2/qa/common.check:1054: _i=`expr $_i + 1`
pcp-5.2.2/qa/common.check-1055- if [ "$_i" -ge 100 ]
##############################################
pcp-5.2.2/qa/common.check-1102- do
pcp-5.2.2/qa/common.check:1103: _count=`expr $_count + 1`
pcp-5.2.2/qa/common.check-1104- if [ $_count -ge $_maxdelay ]
##############################################
pcp-5.2.2/qa/common.check-1174-{
pcp-5.2.2/qa/common.check:1175: for _file in `find $PCP_ETC_DIR/pcp/pmlogger -type f`
pcp-5.2.2/qa/common.check-1176- do
##############################################
pcp-5.2.2/qa/common.check-1208- _path=$1
pcp-5.2.2/qa/common.check:1209: _prog=`echo $_path | sed -e 's#.*/##'`
pcp-5.2.2/qa/common.check-1210- _pure_prog="$_prog.pure"
##############################################
pcp-5.2.2/qa/common.check-1595- # find min with or without %
pcp-5.2.2/qa/common.check:1596: _mintolerance=`echo $_mintol | sed -e 's/%//'`
pcp-5.2.2/qa/common.check-1597- if [ $_mintol = $_mintolerance ]
pcp-5.2.2/qa/common.check-1598- then
pcp-5.2.2/qa/common.check:1599: _min=`echo "scale=5; $_correct_val-$_mintolerance" | bc`
pcp-5.2.2/qa/common.check-1600- else
pcp-5.2.2/qa/common.check:1601: _min=`echo "scale=5; $_correct_val-$_mintolerance*0.01*$_correct_val" | bc`
pcp-5.2.2/qa/common.check-1602- fi
##############################################
pcp-5.2.2/qa/common.check-1604- # find max with or without %
pcp-5.2.2/qa/common.check:1605: _maxtolerance=`echo $_maxtol | sed -e 's/%//'`
pcp-5.2.2/qa/common.check-1606- if [ $_maxtol = $_maxtolerance ]
pcp-5.2.2/qa/common.check-1607- then
pcp-5.2.2/qa/common.check:1608: _max=`echo "scale=5; $_correct_val+$_maxtolerance" | bc`
pcp-5.2.2/qa/common.check-1609- else
pcp-5.2.2/qa/common.check:1610: _max=`echo "scale=5; $_correct_val+$_maxtolerance*0.01*$_correct_val" | bc`
pcp-5.2.2/qa/common.check-1611- fi
##############################################
pcp-5.2.2/qa/common.check-1627-
pcp-5.2.2/qa/common.check:1628: _above_min=`bc < $tmp._bc.1`
pcp-5.2.2/qa/common.check:1629: _below_max=`bc < $tmp._bc.2`
pcp-5.2.2/qa/common.check-1630-
pcp-5.2.2/qa/common.check:1631: _in_range=`expr $_above_min \& $_below_max`
pcp-5.2.2/qa/common.check-1632-
##############################################
pcp-5.2.2/qa/common.check-1634- # can vary for 5.3, 6.2
pcp-5.2.2/qa/common.check:1635: _min=`echo $_min | sed -e 's/0*$//'` # get rid of trailling zeroes
pcp-5.2.2/qa/common.check:1636: _max=`echo $_max | sed -e 's/0*$//'` # get rid of trailling zeroes
pcp-5.2.2/qa/common.check-1637-
##############################################
pcp-5.2.2/qa/common.check-1820- fi
pcp-5.2.2/qa/common.check:1821: __port=`expr $__port + 1`
pcp-5.2.2/qa/common.check-1822- done
##############################################
pcp-5.2.2/qa/common.check-1827-{
pcp-5.2.2/qa/common.check:1828: check=`echo a | od -x 2>&1 | sed -e 's/^0[^ ]* *//' -e 's/ //g' -e '/^$/d'`
pcp-5.2.2/qa/common.check-1829- case "$check"
##############################################
pcp-5.2.2/qa/common.check-1933- then
pcp-5.2.2/qa/common.check:1934: __host=`_ipaddr_to_host $__ip`
pcp-5.2.2/qa/common.check-1935- if [ ! -z "$__host" ]
##############################################
pcp-5.2.2/qa/common.check-2149- then
pcp-5.2.2/qa/common.check:2150: state=`svcs -l svc:/application/pcp/$pat | sed -n '/^state[ ]/s///p'`
pcp-5.2.2/qa/common.check-2151- [ -n "$state" -a "$state" != "online" ] \
##############################################
pcp-5.2.2/qa/common.check-2364- else
pcp-5.2.2/qa/common.check:2365: state=`svcs -H svc:/application/pcp/$pat | sed -e 's/[ ].*//'`
pcp-5.2.2/qa/common.check-2366- case "$state"
##############################################
pcp-5.2.2/qa/common.check-2524- fi
pcp-5.2.2/qa/common.check:2525: if [ "`echo ${dir}core*`" != "${dir}core*" ]
pcp-5.2.2/qa/common.check-2526- then
##############################################
pcp-5.2.2/qa/common.check-2531- do
pcp-5.2.2/qa/common.check:2532: d=`basename $c`
pcp-5.2.2/qa/common.check-2533- $sudo mv $c $here/$seq.$d
##############################################
pcp-5.2.2/qa/common.check-2641- do
pcp-5.2.2/qa/common.check:2642: base=`expr $base + 1`
pcp-5.2.2/qa/common.check-2643- done
##############################################
pcp-5.2.2/qa/common.check-2656- then
pcp-5.2.2/qa/common.check:2657: symroot=`realpath "$root"`
pcp-5.2.2/qa/common.check-2658- basename "$symroot"
pcp-5.2.2/qa/common.check-2659- else
pcp-5.2.2/qa/common.check:2660: symroot=`ls -l "$root" | sed -e 's/.*-> //'`
pcp-5.2.2/qa/common.check-2661- if [ -z "$symroot" ]
##############################################
pcp-5.2.2/qa/common.check-2699-End-of-File
pcp-5.2.2/qa/common.check:2700: _libvirt_ver=`$PCP_PYTHON_PROG $tmp.py 2>/dev/null`
pcp-5.2.2/qa/common.check-2701- echo "Ubuntu and libvirt version $_libvirt_ver" >>$here/$seq.full
##############################################
pcp-5.2.2/qa/common.compress-46-{
pcp-5.2.2/qa/common.compress:47: base=`echo $1 | sed -e 's/\..*//'`
pcp-5.2.2/qa/common.compress-48- [ $# -eq 1 ] && echo "pmdumplog ..."
##############################################
pcp-5.2.2/qa/common.containers-13- [ $PCP_PLATFORM = linux ] || _notrun "Linux-specific containers testing"
pcp-5.2.2/qa/common.containers:14: _contain=`pmprobe -v pmcd.feature.containers | awk '{ print $3 }'`
pcp-5.2.2/qa/common.containers-15- [ $_contain = 1 ] || _notrun "Running kernel does not support containers"
##############################################
pcp-5.2.2/qa/common.containers-59- # podman does not seem to terminate the line the same way (so, -c)
pcp-5.2.2/qa/common.containers:60: __count=`eval $podman images --quiet $__image 2>/dev/null | wc -c`
pcp-5.2.2/qa/common.containers-61- [ "$__count" -gt 0 ] || \
##############################################
pcp-5.2.2/qa/common.containers-71- do
pcp-5.2.2/qa/common.containers:72: __count=`eval $docker images --quiet $__image 2>/dev/null | wc -l`
pcp-5.2.2/qa/common.containers-73- [ "$__count" -gt 0 ] || \
##############################################
pcp-5.2.2/qa/common.discovery-60- # erroneously unresolved address.
pcp-5.2.2/qa/common.discovery:61: dug=`dig -x $addr +short`
pcp-5.2.2/qa/common.discovery-62- [ -z "$dug" ] && continue
##############################################
pcp-5.2.2/qa/common.install.cisco-49-# hostname(1), or pmhostname(1)
pcp-5.2.2/qa/common.install.cisco:50:hostnma=`$PCP_BINADM_DIR/pmhostname`
pcp-5.2.2/qa/common.install.cisco-51-hostnmb=`hostname`
##############################################
pcp-5.2.2/qa/common.install.cisco-96- *)
pcp-5.2.2/qa/common.install.cisco:97: echo "Error: don't know how to install cisco PMDA on host `$PCP_BINADM_DIR/pmhostname`"
pcp-5.2.2/qa/common.install.cisco-98- exit 1
##############################################
pcp-5.2.2/qa/common.openmetrics-23-{
pcp-5.2.2/qa/common.openmetrics:24: v=`python -V 2>&1 | awk '{print $NF}'`
pcp-5.2.2/qa/common.openmetrics-25- [ "$v" = "2.6.6" ] && return 0
##############################################
pcp-5.2.2/qa/common.openmetrics-82- for f in $PCP_VAR_DIR/config/pmda/144.*.py.$seq; do
pcp-5.2.2/qa/common.openmetrics:83: [ -f "$f" ] && $sudo mv -f $f `echo $f | sed -e "s/\.$seq//"`
pcp-5.2.2/qa/common.openmetrics-84- done
##############################################
pcp-5.2.2/qa/common.openmetrics-123- sleep 1
pcp-5.2.2/qa/common.openmetrics:124: _i=`expr $_i + 1`
pcp-5.2.2/qa/common.openmetrics-125- done
##############################################
pcp-5.2.2/qa/common.python-43-{
pcp-5.2.2/qa/common.python:44: version=`$python --version 2>&1 | sed -e 's/Python //'`
pcp-5.2.2/qa/common.python-45- case "$version"
##############################################
pcp-5.2.2/qa/common.qt-24- dbus-daemon --fork --session --print-address=3 --print-pid=4 3>$tmp.dbus.address 4>$tmp.dbus.pid
pcp-5.2.2/qa/common.qt:25: export DBUS_SESSION_BUS_ADDRESS="`cat $tmp.dbus.address`"
pcp-5.2.2/qa/common.qt:26: DBUS_SESSION_BUS_PID="`cat $tmp.dbus.pid`"
pcp-5.2.2/qa/common.qt-27- if kill -0 "$DBUS_SESSION_BUS_PID" >/dev/null 2>&1
##############################################
pcp-5.2.2/qa/common.rc-106-then
pcp-5.2.2/qa/common.rc:107: pcp_dir_owner=`ls -ld $PCP_DIR | awk '{print $3}'`
pcp-5.2.2/qa/common.rc-108- whoami=`whoami`
##############################################
pcp-5.2.2/qa/common.rpm-147- echo "RPM pathname: $rpm_bin_pkg" >> $here/$seq.full
pcp-5.2.2/qa/common.rpm:148: echo "count before from rpm(1): `$sudo rpm -qa | wc -l | sed -e 's/ *//g'`" >> $seq.full
pcp-5.2.2/qa/common.rpm-149- $sudo rpm -i $rpm_bin_pkg >> $here/$seq.full 2>&1
pcp-5.2.2/qa/common.rpm-150- $sudo rpm -qa >> $seq.full 2>&1
pcp-5.2.2/qa/common.rpm:151: echo "count after from rpm(1): `$sudo rpm -qa | wc -l | sed -e 's/ *//g'`" >> $seq.full
pcp-5.2.2/qa/common.rpm-152- fi
##############################################
pcp-5.2.2/qa/common.rpm-170- pmsleep 0.1
pcp-5.2.2/qa/common.rpm:171: countdown=`expr $countdown - 1`
pcp-5.2.2/qa/common.rpm-172- done
##############################################
pcp-5.2.2/qa/common.rpm-208- pmsleep 0.1
pcp-5.2.2/qa/common.rpm:209: countdown=`expr $countdown - 1`
pcp-5.2.2/qa/common.rpm-210- done
##############################################
pcp-5.2.2/qa/common.secure-54- then
pcp-5.2.2/qa/common.secure:55: test `cat $fipsfile` -ne 0 && fips=true
pcp-5.2.2/qa/common.secure-56- fi
##############################################
pcp-5.2.2/qa/common.secure-111-{
pcp-5.2.2/qa/common.secure:112: certdomain=`nss_subject_name $qahost $hostname`
pcp-5.2.2/qa/common.secure-113-
##############################################
pcp-5.2.2/qa/findmetric-14-{
pcp-5.2.2/qa/findmetric:15: echo >&2 "Usage: `basename $0` [options] pat ..."
pcp-5.2.2/qa/findmetric-16- echo >&2 " -a search archives [default]"
##############################################
pcp-5.2.2/qa/findmetric-37-done
pcp-5.2.2/qa/findmetric:38:shift `expr $OPTIND - 1`
pcp-5.2.2/qa/findmetric-39-
##############################################
pcp-5.2.2/qa/findmetric-100-}'`
pcp-5.2.2/qa/findmetric:101: echo "=== `echo "$src" | sed -e 's/\.meta$//' -e 's/\.meta\.[^.]*$//'` (V.$vers) host: $host ==="
pcp-5.2.2/qa/findmetric-102- grep commencing $tmp.info
##############################################
pcp-5.2.2/qa/getpmcdhosts-131- then
pcp-5.2.2/qa/getpmcdhosts:132: osname=`ssh -q $SSH_USER@$HOST uname -s`
pcp-5.2.2/qa/getpmcdhosts-133- if echo $osname | grep -i $SYSTEM >/dev/null 2>&1
##############################################
pcp-5.2.2/qa/getpmcdhosts-168- then
pcp-5.2.2/qa/getpmcdhosts:169: echo "$HOST: Unknown number of processors, pmprobe -> `pmprobe -h $HOST -v hinv.ncpu 2>&1`" >&2
pcp-5.2.2/qa/getpmcdhosts-170- fi
##############################################
pcp-5.2.2/qa/getpmcdhosts-188- $VERBOSE && echo "+ echo a | ssh -q $SSH_USER@$HOST od -x"
pcp-5.2.2/qa/getpmcdhosts:189: check=`echo a | ssh -q $SSH_USER@$HOST "od -x" 2>&1 | sed -e 's/^0[^ ]* *//' -e 's/[ ]*$//' -e '/^$/d'`
pcp-5.2.2/qa/getpmcdhosts-190- $VERBOSE && echo "-> |$check|"
##############################################
pcp-5.2.2/qa/getpmcdhosts-293- else
pcp-5.2.2/qa/getpmcdhosts:294: $MSG && echo "$HOST: pmprobe failed `cat $tmp.errs`" >&2
pcp-5.2.2/qa/getpmcdhosts-295- return 1
##############################################
pcp-5.2.2/qa/getpmcdhosts-365- else
pcp-5.2.2/qa/getpmcdhosts:366: $MSG && echo "$HOST: pmprobe failed `cat $tmp.errs`" >&2
pcp-5.2.2/qa/getpmcdhosts-367- return 1
##############################################
pcp-5.2.2/qa/getpmcdhosts-437- m)
pcp-5.2.2/qa/getpmcdhosts:438: metric=`echo $OPTARG | sed -e 's/[ ]*//' -e 's/[=<>!].*//'`
pcp-5.2.2/qa/getpmcdhosts:439: value=`echo $OPTARG | sed -e 's/[ ]*//' -e 's/.*[=<>!]//'`
pcp-5.2.2/qa/getpmcdhosts:440: op=`echo $OPTARG | sed -e 's/[ ]*//' -e "s/$metric//" -e "s/$value//"`
pcp-5.2.2/qa/getpmcdhosts-441- case "$op"
##############################################
pcp-5.2.2/qa/getpmcdhosts-472- v)
pcp-5.2.2/qa/getpmcdhosts:473: item=`echo $OPTARG | sed -e 's/[ ]*//' -e 's/[=<>!].*//'`
pcp-5.2.2/qa/getpmcdhosts:474: value=`echo $OPTARG | sed -e 's/[ ]*//' -e 's/.*[=<>!]//'`
pcp-5.2.2/qa/getpmcdhosts:475: op=`echo $OPTARG | sed -e 's/[ ]*//' -e "s/$item//" -e "s/$value//"`
pcp-5.2.2/qa/getpmcdhosts-476- case "$item"
##############################################
pcp-5.2.2/qa/getpmcdhosts-517-done
pcp-5.2.2/qa/getpmcdhosts:518:if [ $# -ne `expr $OPTIND - 1` ]
pcp-5.2.2/qa/getpmcdhosts-519-then
##############################################
pcp-5.2.2/qa/getpmcdhosts-568- fi
pcp-5.2.2/qa/getpmcdhosts:569: QA_HOSTS=`cat $HOSTS`
pcp-5.2.2/qa/getpmcdhosts-570-fi
##############################################
pcp-5.2.2/qa/getpmcdhosts-603- fi
pcp-5.2.2/qa/getpmcdhosts:604: i=`expr $i + 1`
pcp-5.2.2/qa/getpmcdhosts-605- fi
##############################################
pcp-5.2.2/qa/linux/mk.procpid-11-do
pcp-5.2.2/qa/linux/mk.procpid:12: pid=`basename $process`
pcp-5.2.2/qa/linux/mk.procpid-13- mkdir proc/$pid
##############################################
pcp-5.2.2/qa/linux/mkfakesys.sh-20-find /sys/devices/system -type l | while read f; do
pcp-5.2.2/qa/linux/mkfakesys.sh:21: L=`ls -l $f | awk '{print $NF}'`
pcp-5.2.2/qa/linux/mkfakesys.sh-22- ln -s $L $R$f
##############################################
pcp-5.2.2/qa/mk.localconfig-13-
pcp-5.2.2/qa/mk.localconfig:14:eval `./mk.pcpversion $PCP_VERSION`
pcp-5.2.2/qa/mk.localconfig-15-
##############################################
pcp-5.2.2/qa/mk.logfarm-61-done
pcp-5.2.2/qa/mk.logfarm:62:shift `expr $OPTIND - 1`
pcp-5.2.2/qa/mk.logfarm-63-
##############################################
pcp-5.2.2/qa/mk.logfarm-131- [ -f $tmp.abort ] && break
pcp-5.2.2/qa/mk.logfarm:132: srcbase="`basename $src`"
pcp-5.2.2/qa/mk.logfarm-133-
##############################################
pcp-5.2.2/qa/mk.logfarm-165- #
pcp-5.2.2/qa/mk.logfarm:166: delta=`src/timeshift -z -a "$rootdir"/"$host"/"$dst" "$dst"`
pcp-5.2.2/qa/mk.logfarm-167- cat <<End-of-File >$tmp.config
##############################################
pcp-5.2.2/qa/mk.variant-76-
pcp-5.2.2/qa/mk.variant:77:seq=\`basename \$0\`
pcp-5.2.2/qa/mk.variant-78-
##############################################
pcp-5.2.2/qa/new-57-done
pcp-5.2.2/qa/new:58:shift `expr $OPTIND - 1`
pcp-5.2.2/qa/new-59-
##############################################
pcp-5.2.2/qa/new-141- then
pcp-5.2.2/qa/new:142: try=`printf "%03d\n" $1`
pcp-5.2.2/qa/new-143- random=false
##############################################
pcp-5.2.2/qa/new-157- #
pcp-5.2.2/qa/new:158: seed="`date +%S``echo $USER | tr 'a-z' '0-90-90-9'`"
pcp-5.2.2/qa/new:159: try=`awk 'BEGIN { srand('"$seed"'); printf "%03d\n",int('$min'+rand()*('$max'-'$min')) }' </dev/null`
pcp-5.2.2/qa/new-160- fi
##############################################
pcp-5.2.2/qa/new-175- then
pcp-5.2.2/qa/new:176: try=`awk 'BEGIN { srand('"$seed"'); printf "%03d\n",int('$min'+rand()*('$max'-'$min')) }' </dev/null`
pcp-5.2.2/qa/new:177: probe=`expr $probe + 1`
pcp-5.2.2/qa/new-178- else
pcp-5.2.2/qa/new:179: try=`expr $try + 1`
pcp-5.2.2/qa/new:180: try=`printf "%03d\n" $try`
pcp-5.2.2/qa/new-181- fi
##############################################
pcp-5.2.2/qa/new-225-then
pcp-5.2.2/qa/new:226: seq=\`basename \$0\`
pcp-5.2.2/qa/new-227- echo "QA output created by \$seq"
##############################################
pcp-5.2.2/qa/new-229- # use \$seq from caller, unless not set
pcp-5.2.2/qa/new:230: [ -n "\$seq" ] || seq=\`basename \$0\`
pcp-5.2.2/qa/new:231: echo "QA output created by \`basename \$0\` \$*"
pcp-5.2.2/qa/new-232-fi
##############################################
pcp-5.2.2/qa/new-seqs-45- fi
pcp-5.2.2/qa/new-seqs:46: try=`expr $try + 1`
pcp-5.2.2/qa/new-seqs:47: try=`printf "%03d" $try`
pcp-5.2.2/qa/new-seqs-48-done >$tmp.avail
##############################################
pcp-5.2.2/qa/new-seqs-53- _do_range <$tmp.avail
pcp-5.2.2/qa/new-seqs:54: echo "Below min=$min [`wc -l <$tmp.avail | sed -e 's/ //g'` available] ..."
pcp-5.2.2/qa/new-seqs-55- echo
##############################################
pcp-5.2.2/qa/new-seqs-69- fi
pcp-5.2.2/qa/new-seqs:70: try=`expr $try + 1`
pcp-5.2.2/qa/new-seqs:71: try=`printf "%03d" $try`
pcp-5.2.2/qa/new-seqs-72-done >$tmp.avail
##############################################
pcp-5.2.2/qa/new-seqs-77- _do_range <$tmp.avail
pcp-5.2.2/qa/new-seqs:78: echo "$min $max `wc -l <$tmp.avail | sed -e 's/ //g'`" \
pcp-5.2.2/qa/new-seqs-79- | awk '
##############################################
pcp-5.2.2/qa/pmdas/slow/Install-32-args="$args $x $y"
pcp-5.2.2/qa/pmdas/slow/Install:33:[ "$x" -lt 0 ] && check_delay=`expr -1 \* $x + 2`
pcp-5.2.2/qa/pmdas/slow/Install:34:[ "$x" -gt 0 ] && check_delay=`expr $x + 2`
pcp-5.2.2/qa/pmdas/slow/Install-35-
##############################################
pcp-5.2.2/qa/pmdas/slow_python/Install-32-args="$args $x $y"
pcp-5.2.2/qa/pmdas/slow_python/Install:33:[ "$x" -lt 0 ] && check_delay=`expr \( -1 \) \* $x + 2`
pcp-5.2.2/qa/pmdas/slow_python/Install:34:[ "$x" -gt 0 ] && check_delay=`expr $x + 2`
pcp-5.2.2/qa/pmdas/slow_python/Install-35-
##############################################
pcp-5.2.2/qa/remake-53- $PCP_ECHO_PROG $PCP_ECHO_N "$seq""$PCP_ECHO_C"
pcp-5.2.2/qa/remake:54: lasttime=`sed -n -e "/^$seq /s/.* //p" <check.time`
pcp-5.2.2/qa/remake-55- [ "X$lasttime" != X ] && $PCP_ECHO_PROG $PCP_ECHO_N " ${lasttime}s""$PCP_ECHO_C"
##############################################
pcp-5.2.2/qa/remake-60- then
pcp-5.2.2/qa/remake:61: echo " [not run] `cat $seq.notrun`"
pcp-5.2.2/qa/remake-62- echo "... obviously no $seq.out to save!"
##############################################
pcp-5.2.2/qa/setup.051-17-
pcp-5.2.2/qa/setup.051:18:ipaddr=`_host_to_ipaddr $host`
pcp-5.2.2/qa/setup.051-19-if [ -z "$ipaddr" ]
##############################################
pcp-5.2.2/qa/setup.051-601-
pcp-5.2.2/qa/setup.051:602:echo "This is `basename $0` "
pcp-5.2.2/qa/setup.051-603-echo
##############################################
pcp-5.2.2/qa/show-me-71-done
pcp-5.2.2/qa/show-me:72:shift `expr $OPTIND - 1`
pcp-5.2.2/qa/show-me-73-
##############################################
pcp-5.2.2/qa/show-me-82- else
pcp-5.2.2/qa/show-me:83: QA_DIR_DEFAULT=`ssh $QA_USER@$QA_HOST "/bin/ls -d isms/pcp[1-9]*/qa" 2>/dev/null | grep '^isms/' | tail -1`
pcp-5.2.2/qa/show-me-84- fi
pcp-5.2.2/qa/show-me-85- else
pcp-5.2.2/qa/show-me:86: QA_DIR_DEFAULT=`ssh $QA_USER@$QA_HOST "/bin/ls -d isms/pcp[1-9]*/qa" 2>/dev/null | grep '^isms/' | tail -1`
pcp-5.2.2/qa/show-me-87- fi
##############################################
pcp-5.2.2/qa/show-me-107- fi
pcp-5.2.2/qa/show-me:108: set - `echo $list`
pcp-5.2.2/qa/show-me-109- else
pcp-5.2.2/qa/show-me:110: x=`ssh $QA_USER@$QA_HOST echo $QA_DIR/\[0-9]*.out.bad 2>$tmp.err`
pcp-5.2.2/qa/show-me-111- if [ -z "$x" ]
##############################################
pcp-5.2.2/qa/smart/smartctl.sh-7-option="$1"
pcp-5.2.2/qa/smart/smartctl.sh:8:device=`echo "$2" | sed -e 's,/dev/,,g'`
pcp-5.2.2/qa/smart/smartctl.sh-9-
##############################################
pcp-5.2.2/qa/sniff4dodgey-62-done
pcp-5.2.2/qa/sniff4dodgey:63:shift `expr $OPTIND - 1`
pcp-5.2.2/qa/sniff4dodgey-64-
##############################################
pcp-5.2.2/qa/sniff4dodgey-254- then
pcp-5.2.2/qa/sniff4dodgey:255: echo "$seq Warning: tags missing from group: `sort $tmp.warn | uniq | tr '\012' ' '`"
pcp-5.2.2/qa/sniff4dodgey-256- fi
##############################################
pcp-5.2.2/qa/src/atomstr.c-83- hdl = pmdaEventNewArray();
pcp-5.2.2/qa/src/atomstr.c:84: atom.vbp = (pmValueBlock *)pmdaEventGetAddr(hdl);
pcp-5.2.2/qa/src/atomstr.c-85- printf("??? -> %s\n", pmAtomStr(&atom, PM_TYPE_EVENT));
##############################################
pcp-5.2.2/qa/src/atomstr.c-88- pmdaEventAddParam(hdl, PM_ID_NULL, PM_TYPE_32, &atom);
pcp-5.2.2/qa/src/atomstr.c:89: atom.vbp = (pmValueBlock *)pmdaEventGetAddr(hdl);
pcp-5.2.2/qa/src/atomstr.c-90- printf("??? -> %s\n", pmAtomStr(&atom, PM_TYPE_EVENT));
##############################################
pcp-5.2.2/qa/src/atomstr.c-93- pmdaEventAddParam(hdl, PM_ID_NULL, PM_TYPE_STRING, &atom);
pcp-5.2.2/qa/src/atomstr.c:94: atom.vbp = (pmValueBlock *)pmdaEventGetAddr(hdl);
pcp-5.2.2/qa/src/atomstr.c-95- printf("??? -> %s\n", pmAtomStr(&atom, PM_TYPE_EVENT));
##############################################
pcp-5.2.2/qa/src/atomstr.c-97- hdl = pmdaEventNewHighResArray();
pcp-5.2.2/qa/src/atomstr.c:98: atom.vbp = (pmValueBlock *)pmdaEventGetAddr(hdl);
pcp-5.2.2/qa/src/atomstr.c-99- printf("??? -> %s\n", pmAtomStr(&atom, PM_TYPE_HIGHRES_EVENT));
##############################################
pcp-5.2.2/qa/src/atomstr.c-102- pmdaEventAddParam(hdl, PM_ID_NULL, PM_TYPE_32, &atom);
pcp-5.2.2/qa/src/atomstr.c:103: atom.vbp = (pmValueBlock *)pmdaEventGetAddr(hdl);
pcp-5.2.2/qa/src/atomstr.c-104- printf("??? -> %s\n", pmAtomStr(&atom, PM_TYPE_HIGHRES_EVENT));
##############################################
pcp-5.2.2/qa/src/atomstr.c-107- pmdaEventAddParam(hdl, PM_ID_NULL, PM_TYPE_STRING, &atom);
pcp-5.2.2/qa/src/atomstr.c:108: atom.vbp = (pmValueBlock *)pmdaEventGetAddr(hdl);
pcp-5.2.2/qa/src/atomstr.c-109- printf("??? -> %s\n", pmAtomStr(&atom, PM_TYPE_HIGHRES_EVENT));
##############################################
pcp-5.2.2/qa/src/chkacc1.c-113- pmsprintf(buf, sizeof(buf), "%d.%d.%d.%d", 155, host * 3, 17+host, host);
pcp-5.2.2/qa/src/chkacc1.c:114: if ((inaddr =__pmStringToSockAddr(buf)) == NULL) {
pcp-5.2.2/qa/src/chkacc1.c-115- printf("insufficient memory\n");
##############################################
pcp-5.2.2/qa/src/chkacc1.c-137- host * 3, 17+host, host);
pcp-5.2.2/qa/src/chkacc1.c:138: if ((inaddr =__pmStringToSockAddr(buf)) == NULL) {
pcp-5.2.2/qa/src/chkacc1.c-139- printf("insufficient memory\n");
##############################################
pcp-5.2.2/qa/src/chkacc2.c-116- pmsprintf(buf, sizeof(buf), "%d.%d.%d.%d", 155, host * 3, 17+host, host);
pcp-5.2.2/qa/src/chkacc2.c:117: if ((inaddr =__pmStringToSockAddr(buf)) == NULL) {
pcp-5.2.2/qa/src/chkacc2.c-118- printf("insufficient memory\n");
##############################################
pcp-5.2.2/qa/src/chkacc2.c-144- host * 3, 17+host, host);
pcp-5.2.2/qa/src/chkacc2.c:145: if ((inaddr =__pmStringToSockAddr(buf)) == NULL) {
pcp-5.2.2/qa/src/chkacc2.c-146- printf("insufficient memory\n");
##############################################
pcp-5.2.2/qa/src/chkacc3.c-192- pmsprintf(buf, sizeof(buf), "%d.%d.%d.%d", a[ai]+i, b[bi]+i, c[ci]+i, d[di]+i);
pcp-5.2.2/qa/src/chkacc3.c:193: if ((inaddr =__pmStringToSockAddr(buf)) == NULL) {
pcp-5.2.2/qa/src/chkacc3.c-194- printf("insufficient memory\n");
##############################################
pcp-5.2.2/qa/src/chkacc3.c-219- a[ai]+i, b[bi]+i, c[ci]+i, d[di]+i);
pcp-5.2.2/qa/src/chkacc3.c:220: if ((inaddr =__pmStringToSockAddr(buf)) == NULL) {
pcp-5.2.2/qa/src/chkacc3.c-221- printf("insufficient memory\n");
##############################################
pcp-5.2.2/qa/src/grind-tools-48-done
pcp-5.2.2/qa/src/grind-tools:49:shift `expr $OPTIND - 1`
pcp-5.2.2/qa/src/grind-tools-50-
##############################################
pcp-5.2.2/qa/src/grind-tools-191- cat $tmp.config | sh >$tmp.out 2>&1
pcp-5.2.2/qa/src/grind-tools:192: ok=`grep '^[A-Z][a-z][a-z] [A-Z][a-z][a-z]' $tmp.out | wc -l | sed -e 's/ //g'`
pcp-5.2.2/qa/src/grind-tools-193- if [ "$ok" -eq 2 ]
##############################################
pcp-5.2.2/qa/src/grind-tools-235- cat $tmp.config | sh >$tmp.out 2>&1
pcp-5.2.2/qa/src/grind-tools:236: ok=`grep '^[A-Z][a-z][a-z] [A-Z][a-z][a-z]' $tmp.out | wc -l | sed -e 's/ //g'`
pcp-5.2.2/qa/src/grind-tools-237- if [ "$ok" -eq 2 ]
##############################################
pcp-5.2.2/qa/src/mv-me-59-
pcp-5.2.2/qa/src/mv-me:60:shift `expr $OPTIND - 1`
pcp-5.2.2/qa/src/mv-me-61-
##############################################
pcp-5.2.2/qa/src/mv-me-76- *.[0-9]|*.meta|*.index)
pcp-5.2.2/qa/src/mv-me:77: arch=`echo $arch | sed -e 's/\.[^.][^.]*$//'`
pcp-5.2.2/qa/src/mv-me-78- ;;
##############################################
pcp-5.2.2/qa/src/mv-me-144- *.[0-9]|*.meta|*.index)
pcp-5.2.2/qa/src/mv-me:145: arch=`echo $arch | sed -e 's/\.[^.][^.]*$//'`
pcp-5.2.2/qa/src/mv-me-146- ;;
##############################################
pcp-5.2.2/qa/src/mv-me-214- cd ..
pcp-5.2.2/qa/src/mv-me:215: check -l `sort -u $tmp.tmp`
pcp-5.2.2/qa/src/mv-me-216-else
##############################################
pcp-5.2.2/qa/src/pmcdgone.c-46- */
pcp-5.2.2/qa/src/pmcdgone.c:47: sts = system(". $PCP_DIR/etc/pcp.env; ( ls -l $PCP_TMP_DIR/pmlogger/primary; cat $PCP_TMP_DIR/pmlogger/primary ) | sed -e 's/^/+ /' >&2");
pcp-5.2.2/qa/src/pmcdgone.c-48- if (sts != 0)
##############################################
pcp-5.2.2/qa/src/pmcdgone.c-348- else
pcp-5.2.2/qa/src/pmcdgone.c:349: sts = system(". $PCP_DIR/etc/pcp.env; $PCP_RC_DIR/pmcd stop");
pcp-5.2.2/qa/src/pmcdgone.c-350- if (sts != 0)
##############################################
pcp-5.2.2/qa/src/pmcdgone.c-390- else
pcp-5.2.2/qa/src/pmcdgone.c:391: sts = system(". $PCP_DIR/etc/pcp.env; $PCP_RC_DIR/pmlogger stop");
pcp-5.2.2/qa/src/pmcdgone.c-392- fprintf(stderr, "About to restart pmcd ...\n");
##############################################
pcp-5.2.2/qa/src/pmcdgone.c-395- else {
pcp-5.2.2/qa/src/pmcdgone.c:396: sts = system(". $PCP_DIR/etc/pcp.env; path_opt=''; if [ $PCP_PLATFORM = linux ]; then path_opt=pmlogger/; fi; pmafm $PCP_LOG_DIR/$path_opt`hostname`/Latest remove 2>/dev/null | sh");
pcp-5.2.2/qa/src/pmcdgone.c-397- if (sts != 0)
pcp-5.2.2/qa/src/pmcdgone.c-398- fprintf(stderr, "Warning: folio removal returns %d\n", sts);
pcp-5.2.2/qa/src/pmcdgone.c:399: sts = system(". $PCP_DIR/etc/pcp.env; $PCP_RC_DIR/pmcd restart");
pcp-5.2.2/qa/src/pmcdgone.c-400- }
##############################################
pcp-5.2.2/qa/src/pmcdgone.c-405- if(access(path, X_OK) == 0) {
pcp-5.2.2/qa/src/pmcdgone.c:406: sts = system(". $PCP_DIR/etc/pcp.env; [ -x $PCP_BINADM_DIR/pmcd_wait ] && $PCP_BINADM_DIR/pmcd_wait");
pcp-5.2.2/qa/src/pmcdgone.c-407- if (sts != 0)
##############################################
pcp-5.2.2/qa/src/pmcdgone.c-413- else
pcp-5.2.2/qa/src/pmcdgone.c:414: sts = system(". $PCP_DIR/etc/pcp.env; $PCP_RC_DIR/pmlogger restart");
pcp-5.2.2/qa/src/pmcdgone.c-415- if (sts != 0) {
##############################################
pcp-5.2.2/qa/src/pmcdgone.c-422-
pcp-5.2.2/qa/src/pmcdgone.c:423: sts = system(". $PCP_DIR/etc/pcp.env; ( cat common.check; echo _wait_for_pmlogger -P $PCP_LOG_DIR/pmlogger/`hostname`/pmlogger.log ) | sh");
pcp-5.2.2/qa/src/pmcdgone.c-424- if (sts != 0)
##############################################
pcp-5.2.2/qa/src/show-args-9- echo "arg[$i] $arg"
pcp-5.2.2/qa/src/show-args:10: i=`expr $i + 1`
pcp-5.2.2/qa/src/show-args-11-done
##############################################
pcp-5.2.2/qa/unbound/test.sh-4-state=/tmp/unbound-qa.txt
pcp-5.2.2/qa/unbound/test.sh:5:[ -f $state ] && count=`cat $state`
pcp-5.2.2/qa/unbound/test.sh:6:count=`expr $count + 1`
pcp-5.2.2/qa/unbound/test.sh-7-
pcp-5.2.2/qa/unbound/test.sh-8-# produce some mocked output
pcp-5.2.2/qa/unbound/test.sh:9:count=`printf "%03d" $count`
pcp-5.2.2/qa/unbound/test.sh-10-[ -f unbound/unbound-control-stats-$count ] || count=001
##############################################
pcp-5.2.2/scripts/bintray-version-33-{
pcp-5.2.2/scripts/bintray-version:34: distro="$1"; desc=`lookup_description "$1"`
pcp-5.2.2/scripts/bintray-version-35-
##############################################
pcp-5.2.2/scripts/check-archives-14-{
pcp-5.2.2/scripts/check-archives:15: sts=`cat $tmp.sts`
pcp-5.2.2/scripts/check-archives-16- rm -f $tmp.*
##############################################
pcp-5.2.2/scripts/check-archives-27-{
pcp-5.2.2/scripts/check-archives:28: _sts=`cat $tmp.sts`
pcp-5.2.2/scripts/check-archives-29- [ $_sts -lt $1 ] && echo $1 >$tmp.sts
##############################################
pcp-5.2.2/scripts/check-archives-46-
pcp-5.2.2/scripts/check-archives:47:progname=`basename $0`
pcp-5.2.2/scripts/check-archives-48-
##############################################
pcp-5.2.2/scripts/check-archives-189- #
pcp-5.2.2/scripts/check-archives:190: for base in `cat $tmp.list`
pcp-5.2.2/scripts/check-archives-191- do
##############################################
pcp-5.2.2/scripts/check-archives-194- rm -f $tmp.err
pcp-5.2.2/scripts/check-archives:195: if [ "`echo $base.index*`" = "$base.index*" ]
pcp-5.2.2/scripts/check-archives-196- then
##############################################
pcp-5.2.2/scripts/check-archives-206- #
pcp-5.2.2/scripts/check-archives:207: if [ "`echo $base.meta*`" = "$base.meta*" ]
pcp-5.2.2/scripts/check-archives-208- then
##############################################
pcp-5.2.2/scripts/check-archives-218- #
pcp-5.2.2/scripts/check-archives:219: if [ -f $base.0 -o -f "`echo $base.0.*`" ]
pcp-5.2.2/scripts/check-archives-220- then
##############################################
pcp-5.2.2/scripts/check-archives-223- #
pcp-5.2.2/scripts/check-archives:224: for file in `echo $base.[0-9]*`
pcp-5.2.2/scripts/check-archives-225- do
##############################################
pcp-5.2.2/scripts/check-archives-242- do
pcp-5.2.2/scripts/check-archives:243: if [ -f $base.$vol -o -f "`echo $base.$vol.*`" ]
pcp-5.2.2/scripts/check-archives-244- then
##############################################
pcp-5.2.2/scripts/check-archives-253- fi
pcp-5.2.2/scripts/check-archives:254: vol=`expr $vol + 1`
pcp-5.2.2/scripts/check-archives-255- done
##############################################
pcp-5.2.2/scripts/check-archives-301- do
pcp-5.2.2/scripts/check-archives:302: date=`pmdate -${back}d '%Y%m%d'`
pcp-5.2.2/scripts/check-archives-303- if [ -z "$date" ]
##############################################
pcp-5.2.2/scripts/check-archives-314- #
pcp-5.2.2/scripts/check-archives:315: narch="`wc -l <$tmp.tmp | sed -e 's/[ ]//g'`"
pcp-5.2.2/scripts/check-archives-316- if [ "$narch" -ne 1 ]
##############################################
pcp-5.2.2/scripts/check-archives-339- fi
pcp-5.2.2/scripts/check-archives:340: back=`expr $back - 1`
pcp-5.2.2/scripts/check-archives-341- done
##############################################
pcp-5.2.2/scripts/check-metadata-42-done
pcp-5.2.2/scripts/check-metadata:43:shift `expr $OPTIND - 1`
pcp-5.2.2/scripts/check-metadata-44-
##############################################
pcp-5.2.2/scripts/demote-51-done
pcp-5.2.2/scripts/demote:52:shift `expr $OPTIND - 1`
pcp-5.2.2/scripts/demote-53-
##############################################
pcp-5.2.2/scripts/demote-68- then
pcp-5.2.2/scripts/demote:69: to=`echo "$from" | sed -n -e 's/^__pm/pm/p'`
pcp-5.2.2/scripts/demote-70- if [ -z "$to" ]
##############################################
pcp-5.2.2/scripts/demote-75- else
pcp-5.2.2/scripts/demote:76: to=`echo "$from" | sed -n -e 's/^pm/__pm/p'`
pcp-5.2.2/scripts/demote-77- if [ -z "$to" ]
##############################################
pcp-5.2.2/scripts/demote-334- then
pcp-5.2.2/scripts/demote:335: for man in `cat $tmp.ok`
pcp-5.2.2/scripts/demote-336- do
##############################################
pcp-5.2.2/scripts/demote-338- then
pcp-5.2.2/scripts/demote:339: $showme && echo >&2 "$file: inventory contains `echo $man | sed -e 's@.*/@@'` man file"
pcp-5.2.2/scripts/demote-340- touch $tmp.file.ok
##############################################
pcp-5.2.2/scripts/demote-356- then
pcp-5.2.2/scripts/demote:357: echo "Warning: no Debian inventory entry for `cat $tmp.ok` man file"
pcp-5.2.2/scripts/demote:358: $suggest && echo "? usr/share/`cat $tmp.ok | tr '[A-Z]' '[a-z]'`.gz"
pcp-5.2.2/scripts/demote-359- fi
##############################################
pcp-5.2.2/scripts/hack-31-done
pcp-5.2.2/scripts/hack:32:shift `expr $OPTIND - 1`
pcp-5.2.2/scripts/hack-33-
##############################################
pcp-5.2.2/scripts/hunter-127- else
pcp-5.2.2/scripts/hunter:128: file=`echo "$line" | sed -e 's/:.*//'`
pcp-5.2.2/scripts/hunter-129- if grep "include.*libpcp.h" <$file >/dev/null
##############################################
pcp-5.2.2/scripts/hunter-157- do
pcp-5.2.2/scripts/hunter:158: file=`echo "$line" | sed -e 's/:.*//'`
pcp-5.2.2/scripts/hunter-159- if grep "include.*libpcp.h" <$file >/dev/null
##############################################
pcp-5.2.2/scripts/new-branch-39-done
pcp-5.2.2/scripts/new-branch:40:shift `expr $OPTIND - 1`
pcp-5.2.2/scripts/new-branch-41-
##############################################
pcp-5.2.2/scripts/pcp-push-109-done
pcp-5.2.2/scripts/pcp-push:110:shift `expr $OPTIND - 1`
pcp-5.2.2/scripts/pcp-push-111-
##############################################
pcp-5.2.2/scripts/promote-51-done
pcp-5.2.2/scripts/promote:52:shift `expr $OPTIND - 1`
pcp-5.2.2/scripts/promote-53-
##############################################
pcp-5.2.2/scripts/promote-68- then
pcp-5.2.2/scripts/promote:69: to=`echo "$from" | sed -n -e 's/^__pm/pm/p'`
pcp-5.2.2/scripts/promote-70- if [ -z "$to" ]
##############################################
pcp-5.2.2/scripts/promote-75- else
pcp-5.2.2/scripts/promote:76: to=`echo "$from" | sed -n -e 's/^pm/__pm/p'`
pcp-5.2.2/scripts/promote-77- if [ -z "$to" ]
##############################################
pcp-5.2.2/scripts/promote-334- then
pcp-5.2.2/scripts/promote:335: for man in `cat $tmp.ok`
pcp-5.2.2/scripts/promote-336- do
##############################################
pcp-5.2.2/scripts/promote-338- then
pcp-5.2.2/scripts/promote:339: $showme && echo >&2 "$file: inventory contains `echo $man | sed -e 's@.*/@@'` man file"
pcp-5.2.2/scripts/promote-340- touch $tmp.file.ok
##############################################
pcp-5.2.2/scripts/promote-356- then
pcp-5.2.2/scripts/promote:357: echo "Warning: no Debian inventory entry for `cat $tmp.ok` man file"
pcp-5.2.2/scripts/promote:358: $suggest && echo "? usr/share/`cat $tmp.ok | tr '[A-Z]' '[a-z]'`.gz"
pcp-5.2.2/scripts/promote-359- fi
##############################################
pcp-5.2.2/scripts/rpm_packages_check-10- echo $rpm | egrep -qs 'debuginfo|debugsource|src\.rpm' && continue
pcp-5.2.2/scripts/rpm_packages_check:11: pkg=`basename $rpm`
pcp-5.2.2/scripts/rpm_packages_check:12: basepkg=`echo $pkg | sed -e '/src.rpm/d' -e "s/-$VER.*.rpm//"`
pcp-5.2.2/scripts/rpm_packages_check:13: fc_pkg=`echo ~/rpmbuild/RPMS/*/$basepkg-$VER-[0-9]*.fc*.*.rpm`
pcp-5.2.2/scripts/rpm_packages_check:14: basefc_pkg=`basename $fc_pkg`
pcp-5.2.2/scripts/rpm_packages_check-15- echo "== rpmdiff -iS -i5 -iD -iN -iL -iF -iT $pkg $basefc_pkg" >/tmp/$$
##############################################
pcp-5.2.2/scripts/tests-from-commits-29- _tests=''
pcp-5.2.2/scripts/tests-from-commits:30: qa_file=`echo "$1" | sed -e 's/^qa\///'`
pcp-5.2.2/scripts/tests-from-commits-31- #debug# echo >&2 "qa_file=$qa_file"
##############################################
pcp-5.2.2/scripts/tests-from-commits-62- |[0-9][0-9][0-9][0-9][-.]*) # not used in any QA test scripts
pcp-5.2.2/scripts/tests-from-commits:63: _tests="`echo $qa_file | sed -e 's/[-.].*//'`"
pcp-5.2.2/scripts/tests-from-commits-64- ;;
##############################################
pcp-5.2.2/scripts/tests-from-commits-130- archives/*.meta*)
pcp-5.2.2/scripts/tests-from-commits:131: _pat=`echo "$qa_file" | sed -e 's/\.bz$//' -e 's/\.xz$//' -e 's/\.[^.]*$//' -e 's/$/( |\.|$)/'`
pcp-5.2.2/scripts/tests-from-commits-132- ;;
##############################################
pcp-5.2.2/scripts/tests-from-commits-153- |badarchives/badti-*.meta*)
pcp-5.2.2/scripts/tests-from-commits:154: _pat=`echo "$qa_file" | sed -e 's/\-.*/-/'`
pcp-5.2.2/scripts/tests-from-commits-155- ;;
pcp-5.2.2/scripts/tests-from-commits-156- badarchives/*.meta*)
pcp-5.2.2/scripts/tests-from-commits:157: _pat=`echo "$qa_file" | sed -e 's/\.bz$//' -e 's/\.xz$//' -e 's/\.[^.]*$//' -e 's/$/( |\.|$)/'`
pcp-5.2.2/scripts/tests-from-commits-158- ;;
##############################################
pcp-5.2.2/scripts/tests-from-commits-237- linux/*) # all over the shop ...
pcp-5.2.2/scripts/tests-from-commits:238: _pat=`echo "$qa_file" | sed -e 's/\.[^.]*$//' -e 's/-[0-9][0-9][0-9]$//'`
pcp-5.2.2/scripts/tests-from-commits-239- ;;
##############################################
pcp-5.2.2/scripts/tests-from-commits-274- pmdas/*)
pcp-5.2.2/scripts/tests-from-commits:275: _pat=`echo "$qa_file" | sed -e 's/\(.*pmdas\/[^/]*\)\/.*/\1/' -e 's/$/( |\/|$)/'`
pcp-5.2.2/scripts/tests-from-commits-276- ;;
##############################################
pcp-5.2.2/scripts/tests-from-commits-348- src/*.c)
pcp-5.2.2/scripts/tests-from-commits:349: _pat=`echo "$qa_file" | sed -e 's/\.[^.]*$//' -e 's/$/( |;|&|>|<|\||$)/'`
pcp-5.2.2/scripts/tests-from-commits-350- ;;
##############################################
pcp-5.2.2/scripts/tests-from-commits-353- src/*.p[ely]*)
pcp-5.2.2/scripts/tests-from-commits:354: _pat=`echo "$qa_file" | sed -e 's/\.[^.]*$/\\./'`
pcp-5.2.2/scripts/tests-from-commits-355- ;;
##############################################
pcp-5.2.2/scripts/tests-from-commits-809-done
pcp-5.2.2/scripts/tests-from-commits:810:shift `expr $OPTIND - 1`
pcp-5.2.2/scripts/tests-from-commits-811-
##############################################
pcp-5.2.2/src/bashrc/GNUmakefile-29- $(INSTALL) -m 644 $(BASHRC) $(BASHDIR)/completions/pcp
pcp-5.2.2/src/bashrc/GNUmakefile:30: for c in `echo $(COMMANDS)`; do \
pcp-5.2.2/src/bashrc/GNUmakefile-31- [ $$c = pcp ] && continue; \
##############################################
pcp-5.2.2/src/discover/pcp-kube-pods.sh-22-file="$PCP_SYSCONF_DIR/discover/pcp-kube-pods.conf"
pcp-5.2.2/src/discover/pcp-kube-pods.sh:23:[ -f "$file" ] && args=`cat "$file"`
pcp-5.2.2/src/discover/pcp-kube-pods.sh-24-
##############################################
pcp-5.2.2/src/genpmda/genpmda-15-
pcp-5.2.2/src/genpmda/genpmda:16:prog=`basename $0`
pcp-5.2.2/src/genpmda/genpmda-17-
##############################################
pcp-5.2.2/src/genpmda/genpmda-114-
pcp-5.2.2/src/genpmda/genpmda:115:IAM=`echo $iflag | tr a-z A-Z`
pcp-5.2.2/src/genpmda/genpmda:116:iam=`echo $IAM | tr A-Z a-z`
pcp-5.2.2/src/genpmda/genpmda-117-[ -z "$nflag" ] && nflag="$iam"
##############################################
pcp-5.2.2/src/genpmda/genpmda-125-[ ! -f "$stdpmid" ] && echo Error: could not find \"stdpmid\" && usage
pcp-5.2.2/src/genpmda/genpmda:126:domain=`awk '/^#define[ \t]*'$IAM'/ {print $3}' $stdpmid`
pcp-5.2.2/src/genpmda/genpmda-127-if [ -z "$Dflag" ]
##############################################
pcp-5.2.2/src/genpmda/genpmda-998-do
pcp-5.2.2/src/genpmda/genpmda:999: b=`basename $f .new`
pcp-5.2.2/src/genpmda/genpmda-1000- if [ -f "$b" ]
##############################################
pcp-5.2.2/src/include/builddefs.in-408-SUBDIRS_MAKERULE = \
pcp-5.2.2/src/include/builddefs.in:409: +for d in `echo $^ `; do \
pcp-5.2.2/src/include/builddefs.in-410- if test -d "$$d" -a -f "$$d/GNUmakefile"; then \
##############################################
pcp-5.2.2/src/include/builddefs.in-418-QA_SUBDIRS_MAKERULE = \
pcp-5.2.2/src/include/builddefs.in:419: +@for d in `echo $^ `; do \
pcp-5.2.2/src/include/builddefs.in-420- if test -d "$$d" ; then \
##############################################
pcp-5.2.2/src/include/builddefs.in-461- print "Botch: no define for domain $(DOMAIN) in $<"; \
pcp-5.2.2/src/include/builddefs.in:462: system("rm '$@'"); \
pcp-5.2.2/src/include/builddefs.in-463- exit(1) \
##############################################
pcp-5.2.2/src/include/builddefs.in-467- print "... see $@ for details"; \
pcp-5.2.2/src/include/builddefs.in:468: system("rm '$@'"); \
pcp-5.2.2/src/include/builddefs.in-469- exit(1) \
##############################################
pcp-5.2.2/src/include/builddefs.in-539- if [ "$(HAVE_MANPAGES)" = "true" ] ; then \
pcp-5.2.2/src/include/builddefs.in:540: for d in `echo $$MAN_PAGES`; do \
pcp-5.2.2/src/include/builddefs.in-541- first=true; \
pcp-5.2.2/src/include/builddefs.in:542: base=`echo $$d | sed -e 's/\.[0-9]//g'`; \
pcp-5.2.2/src/include/builddefs.in:543: section=`echo $$d | sed -e 's/.*\.//g'`; \
pcp-5.2.2/src/include/builddefs.in-544- $(AWK) <$$d ' \
##############################################
pcp-5.2.2/src/include/builddefs.in-605-PERL_MAKE_MAKEFILE = \
pcp-5.2.2/src/include/builddefs.in:606: export PCP_TOPDIR="`cd $(TOPDIR) && pwd`"; \
pcp-5.2.2/src/include/builddefs.in-607- NSS_CFLAGS="$(NSS_CFLAGS)" NSPR_CFLAGS="$(NSPR_CFLAGS)" \
##############################################
pcp-5.2.2/src/include/builddefs.in-688- if [ -n "$(DIST_MANIFEST)" ]; then \
pcp-5.2.2/src/include/builddefs.in:689: if [ "`echo $(TOPDIR)/perl-pcp-*.list`" != "$(TOPDIR)/perl-pcp-*.list" ]; then \
pcp-5.2.2/src/include/builddefs.in-690- cat $(TOPDIR)/perl-pcp-*.list | while read f; do \
pcp-5.2.2/src/include/builddefs.in:691: bn=`basename $$f .gz`; \
pcp-5.2.2/src/include/builddefs.in:692: dn=`dirname $$f`; \
pcp-5.2.2/src/include/builddefs.in-693- $(INSTALL) -d $$dn || exit 1; \
pcp-5.2.2/src/include/builddefs.in:694: src=`find */blib -name $$bn`; \
pcp-5.2.2/src/include/builddefs.in-695- if [ -x $$src ] ; then mode=0755; else mode=0644; fi; \
##############################################
pcp-5.2.2/src/include/builddefs.in-764- | while read f; do \
pcp-5.2.2/src/include/builddefs.in:765: bn=`basename $$f`; \
pcp-5.2.2/src/include/builddefs.in:766: dn=`dirname $$f`; \
pcp-5.2.2/src/include/builddefs.in-767- pydir="$(TOPDIR)/src/python"; \
pcp-5.2.2/src/include/builddefs.in-768- $(INSTALL) -d $$dn || exit 1; \
pcp-5.2.2/src/include/builddefs.in:769: src=`find $$pydir/build $$pydir/pcp.egg-info -name $$bn`; \
pcp-5.2.2/src/include/builddefs.in-770- $(INSTALL) $$src $$f || exit 1; \
##############################################
pcp-5.2.2/src/include/builddefs.in-776- | while read f; do \
pcp-5.2.2/src/include/builddefs.in:777: bn=`basename $$f`; \
pcp-5.2.2/src/include/builddefs.in:778: dn=`dirname $$f`; \
pcp-5.2.2/src/include/builddefs.in-779- pydir="$(TOPDIR)/src/python"; \
pcp-5.2.2/src/include/builddefs.in-780- $(INSTALL) -d $$dn || exit 1; \
pcp-5.2.2/src/include/builddefs.in:781: src=`find $$pydir/build $$pydir/pcp.egg-info -name $$bn`; \
pcp-5.2.2/src/include/builddefs.in-782- $(INSTALL) $$src $$f || exit 1; \
##############################################
pcp-5.2.2/src/include/builddefs.in-793- | while read f; do \
pcp-5.2.2/src/include/builddefs.in:794: bn=`basename $$f`; \
pcp-5.2.2/src/include/builddefs.in:795: dn=`dirname $$f`; \
pcp-5.2.2/src/include/builddefs.in-796- $(INSTALL) -d $$dn || exit 1; \
pcp-5.2.2/src/include/builddefs.in:797: src=`find "$(DIST_ROOT)/usr/lib" -name $$bn`; \
pcp-5.2.2/src/include/builddefs.in-798- $(INSTALL) $$src $$f || exit 1; \
##############################################
pcp-5.2.2/src/include/builddefs.in-804- | while read f; do \
pcp-5.2.2/src/include/builddefs.in:805: bn=`basename $$f`; \
pcp-5.2.2/src/include/builddefs.in:806: dn=`dirname $$f`; \
pcp-5.2.2/src/include/builddefs.in-807- $(INSTALL) -d $$dn || exit 1; \
pcp-5.2.2/src/include/builddefs.in:808: src=`find "$(DIST_ROOT)/usr/lib" -name $$bn`; \
pcp-5.2.2/src/include/builddefs.in-809- $(INSTALL) $$src $$f || exit 1; \
##############################################
pcp-5.2.2/src/include/builddefs.in-855- d=$(1); while [ "$$d" != "$(2)" -a "$$d" != "/" -a "$$d" != "." ] ; do \
pcp-5.2.2/src/include/builddefs.in:856: echo $$d; d=`dirname $$d`; done | sort | while read id; do \
pcp-5.2.2/src/include/builddefs.in-857- $(INSTALL) -m 755 -d $$id || exit 1; done
##############################################
pcp-5.2.2/src/include/builddefs.in-865- find $$nib -type f | while read nibs; do \
pcp-5.2.2/src/include/builddefs.in:866: f=`basename $$nibs`; \
pcp-5.2.2/src/include/builddefs.in-867- $(INSTALL) -m 644 $$nibs $(1)/qt_menu.nib/$$f || exit 1; \
##############################################
pcp-5.2.2/src/include/builddefs.in-881- egrep 'Qt.*\.framework' | while read qt; do \
pcp-5.2.2/src/include/builddefs.in:882: tdir=`dirname $$qt`; \
pcp-5.2.2/src/include/builddefs.in-883- install_name_tool -change $$qt $(MAC_FRAMEWORKS_DIR)/$$qt $(1);\
##############################################
pcp-5.2.2/src/include/builddefs.in-896- while read rf; do \
pcp-5.2.2/src/include/builddefs.in:897: rfpath="$$tdir/$$rf"; rfd=`dirname $$rfpath`; \
pcp-5.2.2/src/include/builddefs.in:898: fwpath="frameworks/$$rfpath"; brfd=`basename $$rfd`; \
pcp-5.2.2/src/include/builddefs.in-899- mkdir -p frameworks/$$rfd || exit 1; \
##############################################
pcp-5.2.2/src/include/buildrules-110-%.tab.h : %.y
pcp-5.2.2/src/include/buildrules:111: $(YACC) -d -b `basename $< .y` $<
pcp-5.2.2/src/include/buildrules-112-
pcp-5.2.2/src/include/buildrules-113-%.tab.c : %.y
pcp-5.2.2/src/include/buildrules:114: $(YACC) -d -b `basename $< .y` $<
pcp-5.2.2/src/include/buildrules-115-
##############################################
pcp-5.2.2/src/include/pcp.env-159- fi
pcp-5.2.2/src/include/pcp.env:160: __which="`which "$1" 2>/dev/null`"
pcp-5.2.2/src/include/pcp.env-161- if [ -n "$__which" ]
##############################################
pcp-5.2.2/src/include/pcp/libpcp.h-468-PCP_CALL extern char * __pmGetNameInfo(__pmSockAddr *);
pcp-5.2.2/src/include/pcp/libpcp.h:469:PCP_CALL extern __pmSockAddr *__pmStringToSockAddr(const char *);
pcp-5.2.2/src/include/pcp/libpcp.h-470-PCP_CALL extern __pmSockAddr *__pmLoopBackAddress(int);
pcp-5.2.2/src/include/pcp/libpcp.h:471:PCP_CALL extern __pmSockAddr *__pmHostEntGetSockAddr(const __pmHostEnt *, void **);
pcp-5.2.2/src/include/pcp/libpcp.h-472-PCP_CALL extern __pmHostEnt * __pmGetAddrInfo(const char *);
##############################################
pcp-5.2.2/src/include/pcp/pmda.h-784-PMDA_CALL extern int pmdaEventAddParam(int, pmID, int, pmAtomValue *);
pcp-5.2.2/src/include/pcp/pmda.h:785:PMDA_CALL extern pmEventArray *pmdaEventGetAddr(int);
pcp-5.2.2/src/include/pcp/pmda.h-786-
##############################################
pcp-5.2.2/src/include/pcp/pmda.h-795-PMDA_CALL extern int pmdaEventHighResAddParam(int, pmID, int, pmAtomValue *);
pcp-5.2.2/src/include/pcp/pmda.h:796:PMDA_CALL extern pmHighResEventArray *pmdaEventHighResGetAddr(int);
pcp-5.2.2/src/include/pcp/pmda.h-797-
##############################################
pcp-5.2.2/src/libpcp/doc/find-unsafe-66-done
pcp-5.2.2/src/libpcp/doc/find-unsafe:67:shift `expr $OPTIND - 1`
pcp-5.2.2/src/libpcp/doc/find-unsafe-68-
##############################################
pcp-5.2.2/src/libpcp/doc/mk.cgraph-85- # list of functions to stop recursion
pcp-5.2.2/src/libpcp/doc/mk.cgraph:86: for f in `echo "$OPTARG" | sed -e 's/,/ /g'`
pcp-5.2.2/src/libpcp/doc/mk.cgraph-87- do
##############################################
pcp-5.2.2/src/libpcp/doc/mk.cgraph-104-done
pcp-5.2.2/src/libpcp/doc/mk.cgraph:105:shift `expr $OPTIND - 1`
pcp-5.2.2/src/libpcp/doc/mk.cgraph-106-
##############################################
pcp-5.2.2/src/libpcp/doc/mk.cgraph-338- then
pcp-5.2.2/src/libpcp/doc/mk.cgraph:339: echo " $func [label=\"$func\\\\n`sort <$tmp.locks | uniq | tr '\012' '@' | sed -e 's/@/\\\\\\\\n/g' -e 's/\\\\\\\\n\$//'`\",shape=box,fontcolor=red,color=red];"
pcp-5.2.2/src/libpcp/doc/mk.cgraph-340- fi
##############################################
pcp-5.2.2/src/libpcp/doc/mk.cgraph-365- fi
pcp-5.2.2/src/libpcp/doc/mk.cgraph:366: echo "digraph `echo $file | sed -e 's@.*/@@' -e 's/\.[cy]$//'` {"
pcp-5.2.2/src/libpcp/doc/mk.cgraph-367- echo
##############################################
pcp-5.2.2/src/libpcp/doc/mk.cgraph-373-do
pcp-5.2.2/src/libpcp/doc/mk.cgraph:374: func=`head -1 $tmp.todo`
pcp-5.2.2/src/libpcp/doc/mk.cgraph-375- _dofunc $func | sed -f $tmp.nolock
##############################################
pcp-5.2.2/src/libpcp/doc/mk.cgraph-383- # some routines called from here
pcp-5.2.2/src/libpcp/doc/mk.cgraph:384: for calls in `cat $tmp.calls`
pcp-5.2.2/src/libpcp/doc/mk.cgraph-385- do
##############################################
pcp-5.2.2/src/libpcp/doc/prune.cgraph-42-done
pcp-5.2.2/src/libpcp/doc/prune.cgraph:43:shift `expr $OPTIND - 1`
pcp-5.2.2/src/libpcp/doc/prune.cgraph-44-
##############################################
pcp-5.2.2/src/libpcp/doc/prune.cgraph-90- then
pcp-5.2.2/src/libpcp/doc/prune.cgraph:91: for func in `cat $tmp.tmp`
pcp-5.2.2/src/libpcp/doc/prune.cgraph-92- do
##############################################
pcp-5.2.2/src/libpcp/src/GNUmakefile-110-getdate.h getdate.tab.c: getdate.y
pcp-5.2.2/src/libpcp/src/GNUmakefile:111: $(YACC) -d -b `basename $< .y` $< && cp `basename $@ .h`.tab.h $@
pcp-5.2.2/src/libpcp/src/GNUmakefile-112-
##############################################
pcp-5.2.2/src/libpcp/src/GNUmakefile-114-derive_parser.tab.h derive_parser.tab.c: derive_parser.y derive.h
pcp-5.2.2/src/libpcp/src/GNUmakefile:115: $(YACC) -d -b `basename $< .y` $<
pcp-5.2.2/src/libpcp/src/GNUmakefile-116-
##############################################
pcp-5.2.2/src/libpcp/src/access.c-594- /* Now create socket addresses for the address and mask. */
pcp-5.2.2/src/libpcp/src/access.c:595: spec->hostid = __pmStringToSockAddr(addr);
pcp-5.2.2/src/libpcp/src/access.c-596- if (spec->hostid == NULL) {
##############################################
pcp-5.2.2/src/libpcp/src/access.c-599- }
pcp-5.2.2/src/libpcp/src/access.c:600: spec->hostmask = __pmStringToSockAddr(mask);
pcp-5.2.2/src/libpcp/src/access.c-601- if (spec->hostmask == NULL) {
##############################################
pcp-5.2.2/src/libpcp/src/access.c-814- enumIx = NULL;
pcp-5.2.2/src/libpcp/src/access.c:815: for (myAddr = __pmHostEntGetSockAddr(servInfo, &enumIx);
pcp-5.2.2/src/libpcp/src/access.c-816- /**/;
pcp-5.2.2/src/libpcp/src/access.c:817: myAddr = __pmHostEntGetSockAddr(servInfo, &enumIx)) {
pcp-5.2.2/src/libpcp/src/access.c-818- if (specIx == specSize) {
##############################################
pcp-5.2.2/src/libpcp/src/access.c-844- if (family == AF_INET) {
pcp-5.2.2/src/libpcp/src/access.c:845: specs[specIx].hostmask = __pmStringToSockAddr("255.255.255.255");
pcp-5.2.2/src/libpcp/src/access.c-846- specs[specIx].level = 0;
##############################################
pcp-5.2.2/src/libpcp/src/access.c-848- else if (family == AF_INET6) {
pcp-5.2.2/src/libpcp/src/access.c:849: specs[specIx].hostmask = __pmStringToSockAddr("ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff");
pcp-5.2.2/src/libpcp/src/access.c-850- specs[specIx].level = 0;
##############################################
pcp-5.2.2/src/libpcp/src/access.c-1303- enumIx = NULL;
pcp-5.2.2/src/libpcp/src/access.c:1304: for (myAddr = __pmHostEntGetSockAddr(myhostid, &enumIx);
pcp-5.2.2/src/libpcp/src/access.c-1305- /**/;
pcp-5.2.2/src/libpcp/src/access.c:1306: myAddr = __pmHostEntGetSockAddr(myhostid, &enumIx)) {
pcp-5.2.2/src/libpcp/src/access.c-1307- if (clientIx == clientSize) {
##############################################
pcp-5.2.2/src/libpcp/src/auxconnect.c-293-__pmSockAddr *
pcp-5.2.2/src/libpcp/src/auxconnect.c:294:__pmStringToSockAddr(const char *cp)
pcp-5.2.2/src/libpcp/src/auxconnect.c-295-{
##############################################
pcp-5.2.2/src/libpcp/src/auxconnect.c-397-__pmSockAddr *
pcp-5.2.2/src/libpcp/src/auxconnect.c:398:__pmSockAddrFirstSubnetAddr(const __pmSockAddr *netAddr, int maskBits)
pcp-5.2.2/src/libpcp/src/auxconnect.c-399-{
##############################################
pcp-5.2.2/src/libpcp/src/auxconnect.c-411- unsigned ip = ntohl(addr->sockaddr.inet.sin_addr.s_addr);
pcp-5.2.2/src/libpcp/src/auxconnect.c:412: ip = __pmFirstInetSubnetAddr (ip, maskBits);
pcp-5.2.2/src/libpcp/src/auxconnect.c-413- addr->sockaddr.inet.sin_addr.s_addr = htonl(ip);
##############################################
pcp-5.2.2/src/libpcp/src/auxconnect.c-415- else if (addr->sockaddr.raw.sa_family == AF_INET6) {
pcp-5.2.2/src/libpcp/src/auxconnect.c:416: __pmFirstIpv6SubnetAddr(addr->sockaddr.ipv6.sin6_addr.s6_addr, maskBits);
pcp-5.2.2/src/libpcp/src/auxconnect.c-417- }
##############################################
pcp-5.2.2/src/libpcp/src/auxconnect.c-431-__pmSockAddr *
pcp-5.2.2/src/libpcp/src/auxconnect.c:432:__pmSockAddrNextSubnetAddr(__pmSockAddr *addr, int maskBits)
pcp-5.2.2/src/libpcp/src/auxconnect.c-433-{
##############################################
pcp-5.2.2/src/libpcp/src/auxconnect.c-441- unsigned ip = ntohl(addr->sockaddr.inet.sin_addr.s_addr);
pcp-5.2.2/src/libpcp/src/auxconnect.c:442: unsigned newIp = __pmNextInetSubnetAddr(ip, maskBits);
pcp-5.2.2/src/libpcp/src/auxconnect.c-443-
##############################################
pcp-5.2.2/src/libpcp/src/auxconnect.c-452- unsigned char *newAddr =
pcp-5.2.2/src/libpcp/src/auxconnect.c:453: __pmNextIpv6SubnetAddr(addr->sockaddr.ipv6.sin6_addr.s6_addr, maskBits);
pcp-5.2.2/src/libpcp/src/auxconnect.c-454-
##############################################
pcp-5.2.2/src/libpcp/src/auxconnect.c-971- enumIx = NULL;
pcp-5.2.2/src/libpcp/src/auxconnect.c:972: for (myAddr = __pmHostEntGetSockAddr(servInfo, &enumIx);
pcp-5.2.2/src/libpcp/src/auxconnect.c-973- myAddr != NULL;
pcp-5.2.2/src/libpcp/src/auxconnect.c:974: myAddr = __pmHostEntGetSockAddr(servInfo, &enumIx)) {
pcp-5.2.2/src/libpcp/src/auxconnect.c-975-#if !defined(IS_SOLARIS) && !defined(IS_MINGW)
##############################################
pcp-5.2.2/src/libpcp/src/auxconnect.c-1215- enumIx = NULL;
pcp-5.2.2/src/libpcp/src/auxconnect.c:1216: for (addr = __pmHostEntGetSockAddr(he, &enumIx);
pcp-5.2.2/src/libpcp/src/auxconnect.c-1217- addr != NULL;
pcp-5.2.2/src/libpcp/src/auxconnect.c:1218: addr = __pmHostEntGetSockAddr(he, &enumIx)) {
pcp-5.2.2/src/libpcp/src/auxconnect.c-1219- he->name = __pmGetNameInfo(addr);
##############################################
pcp-5.2.2/src/libpcp/src/auxconnect.c-1238-__pmSockAddr *
pcp-5.2.2/src/libpcp/src/auxconnect.c:1239:__pmHostEntGetSockAddr(const __pmHostEnt *he, void **ei)
pcp-5.2.2/src/libpcp/src/auxconnect.c-1240-{
##############################################
pcp-5.2.2/src/libpcp/src/auxconnect.c-1353- fprintf(stderr, "%s:__pmGetAddrInfo(%s) -> ", __FILE__, hostName);
pcp-5.2.2/src/libpcp/src/auxconnect.c:1354: for (addr = __pmHostEntGetSockAddr(hostEntry, &enumIx);
pcp-5.2.2/src/libpcp/src/auxconnect.c-1355- addr != NULL;
pcp-5.2.2/src/libpcp/src/auxconnect.c:1356: addr = __pmHostEntGetSockAddr(hostEntry, &enumIx)) {
pcp-5.2.2/src/libpcp/src/auxconnect.c-1357- str = __pmSockAddrToString(addr);
##############################################
pcp-5.2.2/src/libpcp/src/auxconnect.c-1377-unsigned
pcp-5.2.2/src/libpcp/src/auxconnect.c:1378:__pmFirstInetSubnetAddr(unsigned ip, int maskBits)
pcp-5.2.2/src/libpcp/src/auxconnect.c-1379-{
##############################################
pcp-5.2.2/src/libpcp/src/auxconnect.c-1384-unsigned
pcp-5.2.2/src/libpcp/src/auxconnect.c:1385:__pmNextInetSubnetAddr(unsigned ip, int maskBits)
pcp-5.2.2/src/libpcp/src/auxconnect.c-1386-{
##############################################
pcp-5.2.2/src/libpcp/src/auxconnect.c-1397-unsigned char *
pcp-5.2.2/src/libpcp/src/auxconnect.c:1398:__pmFirstIpv6SubnetAddr(unsigned char *addr, int maskBits)
pcp-5.2.2/src/libpcp/src/auxconnect.c-1399-{
##############################################
pcp-5.2.2/src/libpcp/src/auxconnect.c-1420-unsigned char *
pcp-5.2.2/src/libpcp/src/auxconnect.c:1421:__pmNextIpv6SubnetAddr(unsigned char *addr, int maskBits)
pcp-5.2.2/src/libpcp/src/auxconnect.c-1422-{
##############################################
pcp-5.2.2/src/libpcp/src/auxserver.c-495- else {
pcp-5.2.2/src/libpcp/src/auxserver.c:496: if ((myAddr = __pmStringToSockAddr(address)) == NULL) {
pcp-5.2.2/src/libpcp/src/auxserver.c-497- pmNotifyErr(LOG_ERR, "OpenRequestSocket(%d, %s) invalid address\n",
##############################################
pcp-5.2.2/src/libpcp/src/avahi.c-562- avahi_address_snprint(addressString, sizeof(addressString), address);
pcp-5.2.2/src/libpcp/src/avahi.c:563: serviceInfo.address = __pmStringToSockAddr(addressString);
pcp-5.2.2/src/libpcp/src/avahi.c-564- if (serviceInfo.address == NULL) {
##############################################
pcp-5.2.2/src/libpcp/src/check-statics-60- then
pcp-5.2.2/src/libpcp/src/check-statics:61: NM=`cat $tmp/tmp`
pcp-5.2.2/src/libpcp/src/check-statics-62- else
##############################################
pcp-5.2.2/src/libpcp/src/check-statics-663- $skip_file && continue
pcp-5.2.2/src/libpcp/src/check-statics:664: opt=`echo $line | sed -n -e 's/?.*/?/p'`
pcp-5.2.2/src/libpcp/src/check-statics:665: name=`echo $line | sed -e 's/?//'`
pcp-5.2.2/src/libpcp/src/check-statics-666- #debug# echo "obj=$obj type=$line opt=$opt"
##############################################
pcp-5.2.2/src/libpcp/src/internal.h-229-
pcp-5.2.2/src/libpcp/src/internal.h:230:extern unsigned __pmFirstInetSubnetAddr(unsigned, int) _PCP_HIDDEN;
pcp-5.2.2/src/libpcp/src/internal.h:231:extern unsigned __pmNextInetSubnetAddr(unsigned, int) _PCP_HIDDEN;
pcp-5.2.2/src/libpcp/src/internal.h:232:extern unsigned char *__pmFirstIpv6SubnetAddr(unsigned char *, int maskBits) _PCP_HIDDEN;
pcp-5.2.2/src/libpcp/src/internal.h:233:extern unsigned char *__pmNextIpv6SubnetAddr(unsigned char *, int maskBits) _PCP_HIDDEN;
pcp-5.2.2/src/libpcp/src/internal.h-234-
##############################################
pcp-5.2.2/src/libpcp/src/internal.h-386-extern void __pmSockAddrSetScope(__pmSockAddr *, int) _PCP_HIDDEN;
pcp-5.2.2/src/libpcp/src/internal.h:387:extern __pmSockAddr *__pmSockAddrFirstSubnetAddr(const __pmSockAddr *, int) _PCP_HIDDEN;
pcp-5.2.2/src/libpcp/src/internal.h:388:extern __pmSockAddr *__pmSockAddrNextSubnetAddr(__pmSockAddr *, int) _PCP_HIDDEN;
pcp-5.2.2/src/libpcp/src/internal.h-389-
##############################################
pcp-5.2.2/src/libpcp/src/logconnect.c-340- enumIx = NULL;
pcp-5.2.2/src/libpcp/src/logconnect.c:341: for (myAddr = __pmHostEntGetSockAddr(servInfo, &enumIx);
pcp-5.2.2/src/libpcp/src/logconnect.c-342- myAddr != NULL;
pcp-5.2.2/src/libpcp/src/logconnect.c:343: myAddr = __pmHostEntGetSockAddr(servInfo, &enumIx)) {
pcp-5.2.2/src/libpcp/src/logconnect.c-344- /* Create a socket */
##############################################
pcp-5.2.2/src/libpcp/src/logportmap.c-334- enumIx1 = NULL;
pcp-5.2.2/src/libpcp/src/logportmap.c:335: for (addr1 = __pmHostEntGetSockAddr(servInfo1, &enumIx1);
pcp-5.2.2/src/libpcp/src/logportmap.c-336- addr1 != NULL;
pcp-5.2.2/src/libpcp/src/logportmap.c:337: addr1 = __pmHostEntGetSockAddr(servInfo1, &enumIx1)) {
pcp-5.2.2/src/libpcp/src/logportmap.c-338- enumIx2 = NULL;
pcp-5.2.2/src/libpcp/src/logportmap.c:339: for (addr2 = __pmHostEntGetSockAddr(servInfo2, &enumIx2);
pcp-5.2.2/src/libpcp/src/logportmap.c-340- addr2 != NULL;
pcp-5.2.2/src/libpcp/src/logportmap.c:341: addr2 = __pmHostEntGetSockAddr(servInfo2, &enumIx2)) {
pcp-5.2.2/src/libpcp/src/logportmap.c-342- if (__pmSockAddrCompare(addr1, addr2) == 0) {
##############################################
pcp-5.2.2/src/libpcp/src/mk.exports-15-
pcp-5.2.2/src/libpcp/src/mk.exports:16:tmp=`mktemp -d "$PCP_TMPFILE_DIR/pcp-build-mk.exports.XXXXXXXXX"` || exit 1
pcp-5.2.2/src/libpcp/src/mk.exports-17-sts=0
##############################################
pcp-5.2.2/src/libpcp/src/mk.pmdbg-47-
pcp-5.2.2/src/libpcp/src/mk.pmdbg:48:tmp=`mktemp -d "$PCP_TMPFILE_DIR/pcp-build-mk.pmdbg.XXXXXXXXX"` || exit 1
pcp-5.2.2/src/libpcp/src/mk.pmdbg-49-trap "rm -rf $tmp; exit 0" 0 1 2 3 15
##############################################
pcp-5.2.2/src/libpcp/src/mk.pmdbg-81-do
pcp-5.2.2/src/libpcp/src/mk.pmdbg:82: option=`echo "$OPTION" | tr '[A-Z]' '[a-z]'`
pcp-5.2.2/src/libpcp/src/mk.pmdbg-83- echo " { \"$option\", DBG_TRACE_$OPTION, &pmDebugOptions.$option, 0, \"TEXT\" }," >>$tmp/tmp
##############################################
pcp-5.2.2/src/libpcp/src/shellprobe.c-118- enumIx = NULL;
pcp-5.2.2/src/libpcp/src/shellprobe.c:119: for (addr = __pmHostEntGetSockAddr(target.servInfo, &enumIx);
pcp-5.2.2/src/libpcp/src/shellprobe.c-120- addr != NULL;
pcp-5.2.2/src/libpcp/src/shellprobe.c:121: addr = __pmHostEntGetSockAddr(target.servInfo, &enumIx)) {
pcp-5.2.2/src/libpcp/src/shellprobe.c-122- /*
##############################################
pcp-5.2.2/src/libpcp/src/subnetprobe.c-104- context->nextAddress =
pcp-5.2.2/src/libpcp/src/subnetprobe.c:105: __pmSockAddrNextSubnetAddr(context->nextAddress,
pcp-5.2.2/src/libpcp/src/subnetprobe.c-106- context->options->maskBits);
##############################################
pcp-5.2.2/src/libpcp/src/subnetprobe.c-229- * Initialize the first address of the subnet. This pointer will become
pcp-5.2.2/src/libpcp/src/subnetprobe.c:230: * NULL and the memory freed by __pmSockAddrNextSubnetAddr() when the
pcp-5.2.2/src/libpcp/src/subnetprobe.c-231- * final address+port has been probed.
##############################################
pcp-5.2.2/src/libpcp/src/subnetprobe.c-233- context.nextAddress =
pcp-5.2.2/src/libpcp/src/subnetprobe.c:234: __pmSockAddrFirstSubnetAddr(options->netAddress, options->maskBits);
pcp-5.2.2/src/libpcp/src/subnetprobe.c-235- if (context.nextAddress == NULL) {
##############################################
pcp-5.2.2/src/libpcp/src/subnetprobe.c-384- buf[len - 1] = '\0';
pcp-5.2.2/src/libpcp/src/subnetprobe.c:385: options->netAddress = __pmStringToSockAddr(buf);
pcp-5.2.2/src/libpcp/src/subnetprobe.c-386- if (options->netAddress == NULL) {
##############################################
pcp-5.2.2/src/libpcp/src/util.c-1876- char *servInfoName = NULL;
pcp-5.2.2/src/libpcp/src/util.c:1877: for (addr = __pmHostEntGetSockAddr(servInfo, &enumIx);
pcp-5.2.2/src/libpcp/src/util.c-1878- addr != NULL;
pcp-5.2.2/src/libpcp/src/util.c:1879: addr = __pmHostEntGetSockAddr(servInfo, &enumIx)) {
pcp-5.2.2/src/libpcp/src/util.c-1880- servInfoName = __pmGetNameInfo(addr);
##############################################
pcp-5.2.2/src/libpcp_fault/src/GNUmakefile-135-getdate.h getdate.tab.c: getdate.y
pcp-5.2.2/src/libpcp_fault/src/GNUmakefile:136: $(YACC) -d -b `basename $< .y` $< && cp `basename $@ .h`.tab.h $@
pcp-5.2.2/src/libpcp_fault/src/GNUmakefile-137-
##############################################
pcp-5.2.2/src/libpcp_fault/src/GNUmakefile-139-derive_parser.tab.h derive_parser.tab.c: derive_parser.y derive.h
pcp-5.2.2/src/libpcp_fault/src/GNUmakefile:140: $(YACC) -d -b `basename $< .y` $<
pcp-5.2.2/src/libpcp_fault/src/GNUmakefile-141-
##############################################
pcp-5.2.2/src/libpcp_pmda/src/events.c-374-pmEventArray *
pcp-5.2.2/src/libpcp_pmda/src/events.c:375:pmdaEventGetAddr(int idx)
pcp-5.2.2/src/libpcp_pmda/src/events.c-376-{
##############################################
pcp-5.2.2/src/libpcp_pmda/src/events.c-388-pmHighResEventArray *
pcp-5.2.2/src/libpcp_pmda/src/events.c:389:pmdaEventHighResGetAddr(int idx)
pcp-5.2.2/src/libpcp_pmda/src/events.c-390-{
##############################################
pcp-5.2.2/src/libpcp_pmda/src/queues.c-360-
pcp-5.2.2/src/libpcp_pmda/src/queues.c:361: atom->vbp = records ? (pmValueBlock *)pmdaEventGetAddr(key) : NULL;
pcp-5.2.2/src/libpcp_pmda/src/queues.c-362- return sts;
##############################################
pcp-5.2.2/src/libpcp_static/src/GNUmakefile-97-getdate.h getdate.tab.c: getdate.y
pcp-5.2.2/src/libpcp_static/src/GNUmakefile:98: $(YACC) -d -b `basename $< .y` $< && cp `basename $@ .h`.tab.h $@
pcp-5.2.2/src/libpcp_static/src/GNUmakefile-99-
##############################################
pcp-5.2.2/src/libpcp_trace/src/trace.c-750- enumIx = NULL;
pcp-5.2.2/src/libpcp_trace/src/trace.c:751: for (myaddr = __pmHostEntGetSockAddr(servinfo, &enumIx);
pcp-5.2.2/src/libpcp_trace/src/trace.c-752- myaddr != NULL;
pcp-5.2.2/src/libpcp_trace/src/trace.c:753: myaddr = __pmHostEntGetSockAddr(servinfo, &enumIx)) {
pcp-5.2.2/src/libpcp_trace/src/trace.c-754- /* Create a socket */
##############################################
pcp-5.2.2/src/libpcp_web/src/GNUmakefile-102-query_parser.tab.h query_parser.tab.c: query_parser.y query.h
pcp-5.2.2/src/libpcp_web/src/GNUmakefile:103: $(YACC) -d -b `basename $< .y` $<
pcp-5.2.2/src/libpcp_web/src/GNUmakefile-104-
##############################################
pcp-5.2.2/src/libpcp_web/src/http_client.c-133- enumIx = NULL;
pcp-5.2.2/src/libpcp_web/src/http_client.c:134: for (myAddr = __pmHostEntGetSockAddr(servInfo, &enumIx);
pcp-5.2.2/src/libpcp_web/src/http_client.c-135- myAddr != NULL;
pcp-5.2.2/src/libpcp_web/src/http_client.c:136: myAddr = __pmHostEntGetSockAddr(servInfo, &enumIx)) {
pcp-5.2.2/src/libpcp_web/src/http_client.c-137- /* Create a socket */
##############################################
pcp-5.2.2/src/libpcp_web/src/net.c-95-
pcp-5.2.2/src/libpcp_web/src/net.c:96:static int redisSetReuseAddr(redisContext *c) {
pcp-5.2.2/src/libpcp_web/src/net.c-97- int on = 1;
##############################################
pcp-5.2.2/src/libpcp_web/src/net.c-113- if (type == AF_INET) {
pcp-5.2.2/src/libpcp_web/src/net.c:114: if (redisSetReuseAddr(c) == REDIS_ERR) {
pcp-5.2.2/src/libpcp_web/src/net.c-115- return REDIS_ERR;
##############################################
pcp-5.2.2/src/pcp/pcp.sh-18-sts=2
pcp-5.2.2/src/pcp/pcp.sh:19:tmp=`mktemp -d "$PCP_TMPFILE_DIR/pcp.XXXXXXXXX"` || exit 1
pcp-5.2.2/src/pcp/pcp.sh-20-trap "rm -rf $tmp; exit \$sts" 0 1 2 3 15
pcp-5.2.2/src/pcp/pcp.sh-21-
pcp-5.2.2/src/pcp/pcp.sh:22:progname=`basename $0`
pcp-5.2.2/src/pcp/pcp.sh-23-for var in Aflag aflag Dflag gflag hflag Lflag nflag Oflag pflag Sflag sflag Tflag tflag Zflag zflag
##############################################
pcp-5.2.2/src/pcp/pcp.sh-128-opts=""
pcp-5.2.2/src/pcp/pcp.sh:129:ARGS=`$PCP_BINADM_DIR/pmgetopt --progname=$progname --config=$tmp/usage -- "$@"`
pcp-5.2.2/src/pcp/pcp.sh-130-[ $? != 0 ] && exit 1
##############################################
pcp-5.2.2/src/pcp/pcp.sh-246- then
pcp-5.2.2/src/pcp/pcp.sh:247: command=`realpath "$command"`
pcp-5.2.2/src/pcp/pcp.sh-248- else
pcp-5.2.2/src/pcp/pcp.sh:249: command=`_cheap_and_nasty_path "$command"`
pcp-5.2.2/src/pcp/pcp.sh-250- fi
##############################################
pcp-5.2.2/src/pcp/shping/pcp-shping.sh-20-sts=2
pcp-5.2.2/src/pcp/shping/pcp-shping.sh:21:progname=`basename $0`
pcp-5.2.2/src/pcp/shping/pcp-shping.sh:22:tmp=`mktemp -d "$PCP_TMPFILE_DIR/pcp-shping.XXXXXXXXX"` || exit 1
pcp-5.2.2/src/pcp/shping/pcp-shping.sh-23-trap "rm -rf $tmp; exit \$sts" 0 1 2 3 15
##############################################
pcp-5.2.2/src/pcp/shping/pcp-shping.sh-43-lflag=false
pcp-5.2.2/src/pcp/shping/pcp-shping.sh:44:ARGS=`pmgetopt --progname=$progname --config=$tmp/usage -- "$@"`
pcp-5.2.2/src/pcp/shping/pcp-shping.sh-45-[ $? != 0 ] && exit 1
##############################################
pcp-5.2.2/src/pcp/shping/pcp-shping.sh-81-
pcp-5.2.2/src/pcp/shping/pcp-shping.sh:82:set `cat $tmp/cmd`
pcp-5.2.2/src/pcp/shping/pcp-shping.sh-83-if [ "$2" -eq "-12357" ] # Unknown metric name
##############################################
pcp-5.2.2/src/pcp/shping/pcp-shping.sh-136- # build up a pmie configuration file
pcp-5.2.2/src/pcp/shping/pcp-shping.sh:137: cmd=`echo $1 | tr -d '"'`
pcp-5.2.2/src/pcp/shping/pcp-shping.sh-138- echo "'sts_$cmd' = shping.status #'$cmd';" >> $tmp/pmie
##############################################
pcp-5.2.2/src/pcp/summary/pcp-summary.sh-22-sts=2
pcp-5.2.2/src/pcp/summary/pcp-summary.sh:23:tmp=`mktemp -d "$PCP_TMPFILE_DIR/pcp-summary.XXXXXXXXX"` || exit 1
pcp-5.2.2/src/pcp/summary/pcp-summary.sh-24-trap "rm -rf $tmp; exit \$sts" 0 1 2 3 15
##############################################
pcp-5.2.2/src/pcp/summary/pcp-summary.sh-26-errors=0
pcp-5.2.2/src/pcp/summary/pcp-summary.sh:27:progname=`basename $0`
pcp-5.2.2/src/pcp/summary/pcp-summary.sh-28-for var in unknown version build numagents numclients ncpu ndisk nnode nrouter nxbow ncell mem cputype uname timezone hostname services status
##############################################
pcp-5.2.2/src/pcp/summary/pcp-summary.sh-96-BATCH=''
pcp-5.2.2/src/pcp/summary/pcp-summary.sh:97:ARGS=`pmgetopt --progname=$progname --config=$tmp/usage -- "$@"`
pcp-5.2.2/src/pcp/summary/pcp-summary.sh-98-[ $? != 0 ] && exit 1
##############################################
pcp-5.2.2/src/pcp/summary/pcp-summary.sh-244-
pcp-5.2.2/src/pcp/summary/pcp-summary.sh:245:numagents=`_plural $numagents agent`
pcp-5.2.2/src/pcp/summary/pcp-summary.sh:246:ndisk=`_plural $ndisk disk`
pcp-5.2.2/src/pcp/summary/pcp-summary.sh:247:nnode=`_plural $nnode node`
pcp-5.2.2/src/pcp/summary/pcp-summary.sh:248:nrouter=`_plural $nrouter router`
pcp-5.2.2/src/pcp/summary/pcp-summary.sh:249:nxbow=`_plural $nxbow xbow`
pcp-5.2.2/src/pcp/summary/pcp-summary.sh:250:ncell=`_plural $ncell cell`
pcp-5.2.2/src/pcp/summary/pcp-summary.sh-251-
##############################################
pcp-5.2.2/src/pcp/summary/pcp-summary.sh-262-else
pcp-5.2.2/src/pcp/summary/pcp-summary.sh:263: numclients=`expr $numclients - 1`
pcp-5.2.2/src/pcp/summary/pcp-summary.sh:264: numclients=`_plural $numclients client | tr -d ','`
pcp-5.2.2/src/pcp/summary/pcp-summary.sh:265: [ "$numclients" = "" ] && numagents=`echo "$numagents" | tr -d ','`
pcp-5.2.2/src/pcp/summary/pcp-summary.sh-266-fi
##############################################
pcp-5.2.2/src/pcp/summary/pcp-summary.sh-298-then
pcp-5.2.2/src/pcp/summary/pcp-summary.sh:299: cputype=`head -1 $tmp/cputype | sed -e 's/^.*"R/R/' -e 's/"$//g'`
pcp-5.2.2/src/pcp/summary/pcp-summary.sh-300-else
##############################################
pcp-5.2.2/src/pcp/summary/pcp-summary.sh-303-
pcp-5.2.2/src/pcp/summary/pcp-summary.sh:304:ncpu=`_plural $ncpu "$cputype cpu"`
pcp-5.2.2/src/pcp/summary/pcp-summary.sh-305-
##############################################
pcp-5.2.2/src/pcp/summary/pcp-summary.sh-406-echo " platform: ${uname}"
pcp-5.2.2/src/pcp/summary/pcp-summary.sh:407:echo " hardware: "`echo $hardware | _fmt`
pcp-5.2.2/src/pcp/summary/pcp-summary.sh-408-echo " timezone: $timezone"
##############################################
pcp-5.2.2/src/pcp/vmstat/pcp-vmstat.sh-20-sts=2
pcp-5.2.2/src/pcp/vmstat/pcp-vmstat.sh:21:progname=`basename $0`
pcp-5.2.2/src/pcp/vmstat/pcp-vmstat.sh:22:tmp=`mktemp -d "$PCP_TMPFILE_DIR/pcp-vmstat.XXXXXXXXX"` || exit 1
pcp-5.2.2/src/pcp/vmstat/pcp-vmstat.sh-23-trap "rm -rf $tmp; exit \$sts" 0 1 2 3 15
##############################################
pcp-5.2.2/src/pcp/vmstat/pcp-vmstat.sh-36-EOF
pcp-5.2.2/src/pcp/vmstat/pcp-vmstat.sh:37:ARGS=`pmgetopt --progname=$progname --config=$tmp/usage -- "$@"`
pcp-5.2.2/src/pcp/vmstat/pcp-vmstat.sh-38-[ $? != 0 ] && exit 1
##############################################
pcp-5.2.2/src/perl/GNUmakefile-33- if [ -n "$(DIST_MANIFEST)" ]; then \
pcp-5.2.2/src/perl/GNUmakefile:34: if [ "`echo $(TOPDIR)/perl-pcp-*.list`" != "$(TOPDIR)/perl-pcp-*.list" ]; then \
pcp-5.2.2/src/perl/GNUmakefile-35- cat $(TOPDIR)/perl-pcp-*.list | while read f; do \
pcp-5.2.2/src/perl/GNUmakefile:36: bn=`basename $$f .gz`; \
pcp-5.2.2/src/perl/GNUmakefile:37: dn=`dirname $$f`; \
pcp-5.2.2/src/perl/GNUmakefile-38- $(INSTALL) -d $$dn || exit 1; \
pcp-5.2.2/src/perl/GNUmakefile:39: src=`find */blib -name $$bn`; \
pcp-5.2.2/src/perl/GNUmakefile-40- if [ -x $$src ] ; then mode=0755; else mode=0644; fi; \
##############################################
pcp-5.2.2/src/perl/PMDA/local.c-176- enumIx = NULL;
pcp-5.2.2/src/perl/PMDA/local.c:177: for (myaddr = __pmHostEntGetSockAddr(servinfo, &enumIx);
pcp-5.2.2/src/perl/PMDA/local.c-178- myaddr != NULL;
pcp-5.2.2/src/perl/PMDA/local.c:179: myaddr = __pmHostEntGetSockAddr(servinfo, &enumIx)) {
pcp-5.2.2/src/perl/PMDA/local.c-180- if (__pmSockAddrIsInet(myaddr))
##############################################
pcp-5.2.2/src/perl/PMDA/local.c-315- enumIx = NULL;
pcp-5.2.2/src/perl/PMDA/local.c:316: for (myaddr = __pmHostEntGetSockAddr(servinfo, &enumIx);
pcp-5.2.2/src/perl/PMDA/local.c-317- myaddr != NULL;
pcp-5.2.2/src/perl/PMDA/local.c:318: myaddr = __pmHostEntGetSockAddr(servinfo, &enumIx)) {
pcp-5.2.2/src/perl/PMDA/local.c-319- if (__pmSockAddrIsInet(myaddr))
##############################################
pcp-5.2.2/src/pmafm/mkaf-50-
pcp-5.2.2/src/pmafm/mkaf:51:tmp=`mktemp -d "$PCP_TMPFILE_DIR/pm_mkaf.XXXXXXXXX"` || exit 1
pcp-5.2.2/src/pmafm/mkaf-52-status=0
##############################################
pcp-5.2.2/src/pmafm/mkaf-126-do
pcp-5.2.2/src/pmafm/mkaf:127: host=`pmdumplog -l $base 2>&1 | sed -n -e '/^Performance metrics/s/.* host //p'`
pcp-5.2.2/src/pmafm/mkaf-128- if [ -z "$host" ]
##############################################
pcp-5.2.2/src/pmafm/pmafm-75-
pcp-5.2.2/src/pmafm/pmafm:76:_FOLIOPATH=`dirname $1`
pcp-5.2.2/src/pmafm/pmafm-77-if [ "$_FOLIOPATH" = "." ]
##############################################
pcp-5.2.2/src/pmafm/pmafm-87-_FOLIO="$1"
pcp-5.2.2/src/pmafm/pmafm:88:_FOLIONAME=`basename $_FOLIO`
pcp-5.2.2/src/pmafm/pmafm-89-
##############################################
pcp-5.2.2/src/pmafm/pmafm-100-_HOSTS=""
pcp-5.2.2/src/pmafm/pmafm:101:_ALL_HOSTS=`$PCP_AWK_PROG <$_FOLIO '$1 == "Archive:" { printf " %s",$2 }'; echo | sort -u`
pcp-5.2.2/src/pmafm/pmafm-102-_ARCHIVES=""
pcp-5.2.2/src/pmafm/pmafm:103:_ALL_ARCHIVES=`$PCP_AWK_PROG <$_FOLIO '$1 == "Archive:" { printf " %s",$3 }'; echo`
pcp-5.2.2/src/pmafm/pmafm-104-_DEBUG=false
##############################################
pcp-5.2.2/src/pmafm/pmafm-135-
pcp-5.2.2/src/pmafm/pmafm:136:tmp=`mktemp -d "$PCP_TMPFILE_DIR/pmafm.XXXXXXXXX"` || exit 1
pcp-5.2.2/src/pmafm/pmafm-137-trap "rm -rf $tmp; exit" 0 1 2 3 15
##############################################
pcp-5.2.2/src/pmafm/pmafm-142- pmconfig="$PCP_BINADM_DIR/pmconfig"
pcp-5.2.2/src/pmafm/pmafm:143: compress_suffixes=`$pmconfig -L compress_suffixes | sed -e 's/^.*=//g'`
pcp-5.2.2/src/pmafm/pmafm-144- for compression in "" $compress_suffixes
##############################################
pcp-5.2.2/src/pmafm/pmafm-161- do
pcp-5.2.2/src/pmafm/pmafm:162: path=`_fix_arch_path "" $arch`
pcp-5.2.2/src/pmafm/pmafm-163- $PCP_ECHO_PROG $PCP_ECHO_N "Archive: $path ... ""$PCP_ECHO_C"
##############################################
pcp-5.2.2/src/pmafm/pmafm-166- do
pcp-5.2.2/src/pmafm/pmafm:167: arch=`_archive2filename $path.$part`
pcp-5.2.2/src/pmafm/pmafm-168- _is_archive $arch || echo "No such file: $path.$part" >>$tmp/base
##############################################
pcp-5.2.2/src/pmafm/pmafm-171- then
pcp-5.2.2/src/pmafm/pmafm:172: realhost=`pmdumplog -l $path | sed -n -e '/^Performance metrics/s/.* host //p'`
pcp-5.2.2/src/pmafm/pmafm-173- [ "X$host" != "X$realhost" ] && \
##############################################
pcp-5.2.2/src/pmafm/pmafm-200- printf " [%3s] %-20s %s\n" $i $host $archive
pcp-5.2.2/src/pmafm/pmafm:201: [ "X$1" = "Xverbose" ] && pmdumplog -l `_fix_arch_path "" $archive` | sed -e 's/^/ /'
pcp-5.2.2/src/pmafm/pmafm:202: i=`expr $i + 1`
pcp-5.2.2/src/pmafm/pmafm-203- done
##############################################
pcp-5.2.2/src/pmafm/pmafm-250- do
pcp-5.2.2/src/pmafm/pmafm:251: host=`$PCP_AWK_PROG <$_FOLIO '$3 == "'$arch'" { print $2; exit }'`
pcp-5.2.2/src/pmafm/pmafm-252- if echo "$_HOSTS " | grep " $host " >/dev/null
##############################################
pcp-5.2.2/src/pmafm/pmafm-279- then
pcp-5.2.2/src/pmafm/pmafm:280: _REPLAY_CONFIG=`_fix_arch_path "" "$_REPLAY_CONFIG"`
pcp-5.2.2/src/pmafm/pmafm-281- echo "Configuration File: $_REPLAY_CONFIG"
##############################################
pcp-5.2.2/src/pmafm/pmafm-317- tool=$1
pcp-5.2.2/src/pmafm/pmafm:318: tool_basename=`basename $tool`
pcp-5.2.2/src/pmafm/pmafm-319- shift
##############################################
pcp-5.2.2/src/pmafm/pmafm-328- then
pcp-5.2.2/src/pmafm/pmafm:329: n_arch=`echo $archlist | wc -w | sed -e 's/ *//g'`
pcp-5.2.2/src/pmafm/pmafm-330- [ "$n_arch" -gt 1 ] && echo "Note: running $tool serially, once per archive"
##############################################
pcp-5.2.2/src/pmafm/pmafm-333- $PCP_AWK_PROG <$_FOLIO '$3 == "'$arch'" { printf "Host: %s",$2; exit }'
pcp-5.2.2/src/pmafm/pmafm:334: path=`_fix_arch_path "" "$arch"`
pcp-5.2.2/src/pmafm/pmafm-335- echo " Archive: $path"
##############################################
pcp-5.2.2/src/pmafm/pmafm-361- then
pcp-5.2.2/src/pmafm/pmafm:362: $tool -a `_fix_arch_path " -a " $archlist` $*
pcp-5.2.2/src/pmafm/pmafm-363- elif [ "X$tool" = "X_show_me_" ]
##############################################
pcp-5.2.2/src/pmafm/pmafm-366- do
pcp-5.2.2/src/pmafm/pmafm:367: path=`_fix_arch_path "" "$arch"`
pcp-5.2.2/src/pmafm/pmafm-368- echo "Archive: $path"
##############################################
pcp-5.2.2/src/pmafm/pmafm-414- _ARCHIVES=""
pcp-5.2.2/src/pmafm/pmafm:415: for arch in `echo $args | sed -e 's/,/ /g'`
pcp-5.2.2/src/pmafm/pmafm-416- do
##############################################
pcp-5.2.2/src/pmafm/pmafm-465- _HOSTS=""
pcp-5.2.2/src/pmafm/pmafm:466: for host in `echo $args | sed -e 's/,/ /g'`
pcp-5.2.2/src/pmafm/pmafm-467- do
##############################################
pcp-5.2.2/src/pmafm/pmafm-507- esac
pcp-5.2.2/src/pmafm/pmafm:508: tool=`echo "$args" | sed -e 's/ .*//'`
pcp-5.2.2/src/pmafm/pmafm:509: tool_basename=`basename $tool`
pcp-5.2.2/src/pmafm/pmafm-510- if [ -z "$tool" ]
##############################################
pcp-5.2.2/src/pmafm/pmafm-533- do
pcp-5.2.2/src/pmafm/pmafm:534: archfiles=`_archive2filename "$archfiles"`
pcp-5.2.2/src/pmafm/pmafm-535- $PCP_ECHO_PROG $PCP_ECHO_N " $archfiles""$PCP_ECHO_C"
pcp-5.2.2/src/pmafm/pmafm-536- done
pcp-5.2.2/src/pmafm/pmafm:537: path=`_fix_arch_path "" $arch`
pcp-5.2.2/src/pmafm/pmafm-538- pmdumplog -t $path 2>/dev/null \
##############################################
pcp-5.2.2/src/pmafm/pmafm-542- do
pcp-5.2.2/src/pmafm/pmafm:543: archfile=`_archive2filename "$arch.$vol"`
pcp-5.2.2/src/pmafm/pmafm-544- $PCP_ECHO_PROG $PCP_ECHO_N " $archfile""$PCP_ECHO_C"
##############################################
pcp-5.2.2/src/pmcd/GNUmakefile-26- $(SUBDIRS_MAKERULE)
pcp-5.2.2/src/pmcd/GNUmakefile:27: $(INSTALL) -m 755 -d `dirname $(PCP_PMCDOPTIONS_PATH)`
pcp-5.2.2/src/pmcd/GNUmakefile-28- $(INSTALL) -m 644 pmcd.options $(PCP_PMCDOPTIONS_PATH)
pcp-5.2.2/src/pmcd/GNUmakefile:29: $(INSTALL) -m 755 -d `dirname $(PCP_PMCDRCLOCAL_PATH)`
pcp-5.2.2/src/pmcd/GNUmakefile-30- $(INSTALL) -m 755 rc_local $(PCP_PMCDRCLOCAL_PATH)
##############################################
pcp-5.2.2/src/pmcd/pmdaproc.sh-20-
pcp-5.2.2/src/pmcd/pmdaproc.sh:21:tmp=`mktemp -d $PCP_TMPFILE_DIR/pmdaproc.XXXXXXXXX` || exit 1
pcp-5.2.2/src/pmcd/pmdaproc.sh-22-__tmp=$tmp # (preserve backward compatibility)
##############################################
pcp-5.2.2/src/pmcd/pmdaproc.sh-24-trap "rm -rf $tmp $tmp.*; exit \$status" 0 1 2 3 15
pcp-5.2.2/src/pmcd/pmdaproc.sh:25:prog=`basename $0`
pcp-5.2.2/src/pmcd/pmdaproc.sh-26-
##############################################
pcp-5.2.2/src/pmcd/pmdaproc.sh-86- #
pcp-5.2.2/src/pmcd/pmdaproc.sh:87: __opt=`echo "$__opt" | sed -e 's/1/3/'`
pcp-5.2.2/src/pmcd/pmdaproc.sh-88- if ping $__opt >/dev/null 2>&1
##############################################
pcp-5.2.2/src/pmcd/pmdaproc.sh-256- do
pcp-5.2.2/src/pmcd/pmdaproc.sh:257: __pids=`_get_pids_by_name -a pmda$1`
pcp-5.2.2/src/pmcd/pmdaproc.sh-258- if [ ! -z "$__pids" ]
##############################################
pcp-5.2.2/src/pmcd/pmdaproc.sh-361-
pcp-5.2.2/src/pmcd/pmdaproc.sh:362: myname=`echo $1 | $PCP_AWK_PROG '{print $1}'`
pcp-5.2.2/src/pmcd/pmdaproc.sh:363: mydomain=`echo $1 | $PCP_AWK_PROG '{print $2}'`
pcp-5.2.2/src/pmcd/pmdaproc.sh-364- # add entry to $PCP_PMCDCONF_PATH
##############################################
pcp-5.2.2/src/pmcd/pmdaproc.sh-518- then
pcp-5.2.2/src/pmcd/pmdaproc.sh:519: __i=`expr $__i + 1`
pcp-5.2.2/src/pmcd/pmdaproc.sh-520- __choice1=$__i
##############################################
pcp-5.2.2/src/pmcd/pmdaproc.sh-531- else
pcp-5.2.2/src/pmcd/pmdaproc.sh:532: __i=`expr $__i + 1`
pcp-5.2.2/src/pmcd/pmdaproc.sh-533- __choice2=$__i
##############################################
pcp-5.2.2/src/pmcd/pmdaproc.sh-544- else
pcp-5.2.2/src/pmcd/pmdaproc.sh:545: __i=`expr $__i + 1`
pcp-5.2.2/src/pmcd/pmdaproc.sh-546- __choice3=$__i
##############################################
pcp-5.2.2/src/pmcd/pmdaproc.sh-551-
pcp-5.2.2/src/pmcd/pmdaproc.sh:552: __i=`expr $__i + 1`
pcp-5.2.2/src/pmcd/pmdaproc.sh-553- __own_choice=$__i
##############################################
pcp-5.2.2/src/pmcd/pmdaproc.sh-555-
pcp-5.2.2/src/pmcd/pmdaproc.sh:556: __i=`expr $__i + 1`
pcp-5.2.2/src/pmcd/pmdaproc.sh-557- __abort_choice=$__i
##############################################
pcp-5.2.2/src/pmcd/pmdaproc.sh-590- # extract nth field as the file
pcp-5.2.2/src/pmcd/pmdaproc.sh:591: __choice=`echo $__filelist | $PCP_AWK_PROG -v n=$__reply '{ print $n }'`
pcp-5.2.2/src/pmcd/pmdaproc.sh-592- else
##############################################
pcp-5.2.2/src/pmcd/pmdaproc.sh-925-
pcp-5.2.2/src/pmcd/pmdaproc.sh:926: [ "`echo *.$viewer`" != "*.$viewer" ] && have_views=true
pcp-5.2.2/src/pmcd/pmdaproc.sh-927- if [ -d $PCP_VAR_DIR/config/$viewer ]
##############################################
pcp-5.2.2/src/pmcd/pmdaproc.sh-933- then
pcp-5.2.2/src/pmcd/pmdaproc.sh:934: __dest=$PCP_VAR_DIR/config/$viewer/`basename $__i .$viewer`
pcp-5.2.2/src/pmcd/pmdaproc.sh-935- rm -f $__dest
##############################################
pcp-5.2.2/src/pmcd/pmdaproc.sh-1104- #
pcp-5.2.2/src/pmcd/pmdaproc.sh:1105: if [ ! -f "`echo $PCP_MAKE_PROG | sed -e 's/ .*//'`" -o ! -f "$PCP_INC_DIR/pmda.h" ]
pcp-5.2.2/src/pmcd/pmdaproc.sh-1106- then
##############################################
pcp-5.2.2/src/pmcd/pmdaproc.sh-1319- then
pcp-5.2.2/src/pmcd/pmdaproc.sh:1320: __delay_int=`echo $check_delay | sed -e 's/\..*//g'`
pcp-5.2.2/src/pmcd/pmdaproc.sh-1321- [ "$__delay_int" -gt 5 ] && echo "Wait $check_delay seconds for the $iam agent to initialize ..."
##############################################
pcp-5.2.2/src/pmcd/pmdaproc.sh-1386- then
pcp-5.2.2/src/pmcd/pmdaproc.sh:1387: __dest=$PCP_VAR_DIR/config/pmchart/`basename $__i .pmchart`
pcp-5.2.2/src/pmcd/pmdaproc.sh-1388- rm -f $__dest
##############################################
pcp-5.2.2/src/pmcd/pmdaproc.sh-1394- then
pcp-5.2.2/src/pmcd/pmdaproc.sh:1395: __dest=$PCP_VAR_DIR/config/kmchart/`basename $__i .kmchart`
pcp-5.2.2/src/pmcd/pmdaproc.sh-1396- rm -f $__dest
##############################################
pcp-5.2.2/src/pmcd/pmdaproc.sh-1501-NAMESPACE=${PMNS_DEFAULT-$PMNSDIR/root}
pcp-5.2.2/src/pmcd/pmdaproc.sh:1502:PMNSROOT=`basename $NAMESPACE`
pcp-5.2.2/src/pmcd/pmdaproc.sh-1503-
##############################################
pcp-5.2.2/src/pmcd/pmdaproc.sh-1553- #
pcp-5.2.2/src/pmcd/pmdaproc.sh:1554: pmda_dir_1=`echo $pmda_dir | sed -e 's@^/\([^/][^/]*\)/.*@\1@'`
pcp-5.2.2/src/pmcd/pmdaproc.sh:1555: PCP_DIR_N=`echo $PCP_DIR | sed -e 's@\\\\@/@g' -e 's@.*/\([^/][^/]*\)/*$@\1@'`
pcp-5.2.2/src/pmcd/pmdaproc.sh-1556- if [ "$pmda_dir_1" = "$PCP_DIR_N" ]
pcp-5.2.2/src/pmcd/pmdaproc.sh-1557- then
pcp-5.2.2/src/pmcd/pmdaproc.sh:1558: pmda_dir=`echo $pmda_dir | sed -e 's@^/[^/][^/]*\(/.*\)@\1@'`
pcp-5.2.2/src/pmcd/pmdaproc.sh:1559: pmda_dir="`echo $PCP_DIR | sed -e 's@\\\\@/@g'`$pmda_dir"
pcp-5.2.2/src/pmcd/pmdaproc.sh-1560- fi
##############################################
pcp-5.2.2/src/pmcd/pmdaproc.sh-1592- NAMESPACE=$2
pcp-5.2.2/src/pmcd/pmdaproc.sh:1593: PMNSROOT=`basename $NAMESPACE`
pcp-5.2.2/src/pmcd/pmdaproc.sh:1594: PMNSDIR=`dirname $NAMESPACE`
pcp-5.2.2/src/pmcd/pmdaproc.sh-1595- __ns_opt="-n $2"
##############################################
pcp-5.2.2/src/pmcd/rc-proc.sh-128- _cmds_exist $_flag
pcp-5.2.2/src/pmcd/rc-proc.sh:129: $_have_runlevel && _rl=`runlevel | $PCP_AWK_PROG '{print $2}'`
pcp-5.2.2/src/pmcd/rc-proc.sh-130-
##############################################
pcp-5.2.2/src/pmcd/rc-proc.sh-140- in
pcp-5.2.2/src/pmcd/rc-proc.sh:141: pmcd) [ "`. /etc/hostconfig; echo $PMCD`" = "-YES-" ] && _ret=0 ;;
pcp-5.2.2/src/pmcd/rc-proc.sh:142: pmlogger) [ "`. /etc/hostconfig; echo $PMLOGGER`" = "-YES-" ] && _ret=0 ;;
pcp-5.2.2/src/pmcd/rc-proc.sh:143: pmie) [ "`. /etc/hostconfig; echo $PMIE`" = "-YES-" ] && _ret=0 ;;
pcp-5.2.2/src/pmcd/rc-proc.sh:144: pmproxy) [ "`. /etc/hostconfig; echo $PMPROXY`" = "-YES-" ] && _ret=0 ;;
pcp-5.2.2/src/pmcd/rc-proc.sh-145- esac
##############################################
pcp-5.2.2/src/pmcd/rc-proc.sh-188- if [ -f /etc/debian_version ]; then
pcp-5.2.2/src/pmcd/rc-proc.sh:189: $VERBOSE_CONFIG && echo "is_chkconfig_on: using /etc/rc$_rl.d/S[0-9]*$_flag"
pcp-5.2.2/src/pmcd/rc-proc.sh-190- ls /etc/rc$_rl.d/S[0-9]*$_flag >/dev/null 2>&1 && _ret=0
pcp-5.2.2/src/pmcd/rc-proc.sh-191- else
pcp-5.2.2/src/pmcd/rc-proc.sh:192: $VERBOSE_CONFIG && echo "is_chkconfig_on: using /etc/rc.d/rc$_rl.d/S[0-9]*$_flag"
pcp-5.2.2/src/pmcd/rc-proc.sh-193- ls /etc/rc.d/rc$_rl.d/S[0-9]*$_flag >/dev/null 2>&1 && _ret=0
##############################################
pcp-5.2.2/src/pmcd/rc-proc.sh-244- else
pcp-5.2.2/src/pmcd/rc-proc.sh:245: _start=`_runlevel_start $_flag`
pcp-5.2.2/src/pmcd/rc-proc.sh:246: _stop=`_runlevel_stop $_flag`
pcp-5.2.2/src/pmcd/rc-proc.sh-247- if [ -f /etc/debian_version ]
##############################################
pcp-5.2.2/src/pmcd/rc-proc.sh-250- else
pcp-5.2.2/src/pmcd/rc-proc.sh:251: for _r in `_runlevels $_flag`
pcp-5.2.2/src/pmcd/rc-proc.sh-252- do
##############################################
pcp-5.2.2/src/pmcd/rc-proc.sh-327- then
pcp-5.2.2/src/pmcd/rc-proc.sh:328: _cmd=`$PCP_WHICH_PROG systemctl`
pcp-5.2.2/src/pmcd/rc-proc.sh-329- echo " # $_cmd enable $_flag.service"
##############################################
pcp-5.2.2/src/pmcd/rc-proc.sh-331- then
pcp-5.2.2/src/pmcd/rc-proc.sh:332: _cmd=`$PCP_WHICH_PROG chkconfig`
pcp-5.2.2/src/pmcd/rc-proc.sh-333- echo " # $_cmd $_flag on"
##############################################
pcp-5.2.2/src/pmcd/rc-proc.sh-335- then
pcp-5.2.2/src/pmcd/rc-proc.sh:336: _cmd=`$PCP_WHICH_PROG sysvrcconf`
pcp-5.2.2/src/pmcd/rc-proc.sh-337- echo " # $_cmd $_flag on"
##############################################
pcp-5.2.2/src/pmcd/rc-proc.sh-339- then
pcp-5.2.2/src/pmcd/rc-proc.sh:340: _cmd=`$PCP_WHICH_PROG rc-update`
pcp-5.2.2/src/pmcd/rc-proc.sh-341- echo " # $_cmd add $_flag"
##############################################
pcp-5.2.2/src/pmcd/rc-proc.sh-343- then
pcp-5.2.2/src/pmcd/rc-proc.sh:344: _cmd=`$PCP_WHICH_PROG svcadm`
pcp-5.2.2/src/pmcd/rc-proc.sh-345- echo " # $_cmd enable pcp/$_flag"
pcp-5.2.2/src/pmcd/rc-proc.sh-346- else
pcp-5.2.2/src/pmcd/rc-proc.sh:347: _start=`_runlevel_start $_flag`
pcp-5.2.2/src/pmcd/rc-proc.sh:348: _stop=`_runlevel_stop $_flag`
pcp-5.2.2/src/pmcd/rc-proc.sh-349- if [ -f /etc/debian_version ]
##############################################
pcp-5.2.2/src/pmcd/rc-proc.sh-353- else
pcp-5.2.2/src/pmcd/rc-proc.sh:354: for _r in `_runlevels $_flag`
pcp-5.2.2/src/pmcd/rc-proc.sh-355- do
##############################################
pcp-5.2.2/src/pmcd/rc-proc.sh-414- # running
pcp-5.2.2/src/pmcd/rc-proc.sh:415: _b=`basename "$1"`
pcp-5.2.2/src/pmcd/rc-proc.sh:416: _n=`_get_pids_by_name -a $_b | wc -l`
pcp-5.2.2/src/pmcd/rc-proc.sh-417- [ $_n -ge 1 ] && return 0
##############################################
pcp-5.2.2/src/pmcd/rc-proc.sh-445- echo $__i $__path
pcp-5.2.2/src/pmcd/rc-proc.sh:446: __path=`dirname "$__path"`
pcp-5.2.2/src/pmcd/rc-proc.sh:447: __i=`expr $__i + 1`
pcp-5.2.2/src/pmcd/rc-proc.sh-448- done \
##############################################
pcp-5.2.2/src/pmcd/rc_local-47-done
pcp-5.2.2/src/pmcd/rc_local:48:shift `expr $OPTIND - 1`
pcp-5.2.2/src/pmcd/rc_local-49-
##############################################
pcp-5.2.2/src/pmcd/rc_pcp-50-
pcp-5.2.2/src/pmcd/rc_pcp:51:tmp=`mktemp -d "$PCP_TMPFILE_DIR/pcp_rc.XXXXXXXXX"` || exit 1
pcp-5.2.2/src/pmcd/rc_pcp-52-status=0
##############################################
pcp-5.2.2/src/pmcd/rc_pmcd-56-RUNDIR=$PCP_LOG_DIR/pmcd
pcp-5.2.2/src/pmcd/rc_pmcd:57:prog=$PCP_RC_DIR/`basename $0`
pcp-5.2.2/src/pmcd/rc_pmcd-58-
pcp-5.2.2/src/pmcd/rc_pmcd:59:tmp=`mktemp -d "$PCP_TMPFILE_DIR/pmcd_rc.XXXXXXXXX"` || exit 1
pcp-5.2.2/src/pmcd/rc_pmcd-60-status=1
##############################################
pcp-5.2.2/src/pmcd/rc_pmcd-74- ID=id
pcp-5.2.2/src/pmcd/rc_pmcd:75: IAM=`$ID -u 2>/dev/null`
pcp-5.2.2/src/pmcd/rc_pmcd-76- if [ -z "$IAM" ]
##############################################
pcp-5.2.2/src/pmcd/rc_pmcd-79- #
pcp-5.2.2/src/pmcd/rc_pmcd:80: IAM=`$ID | sed -e 's/.*uid=//' -e 's/(.*//'`
pcp-5.2.2/src/pmcd/rc_pmcd-81- fi
##############################################
pcp-5.2.2/src/pmcd/rc_pmcd-137- #
pcp-5.2.2/src/pmcd/rc_pmcd:138: rm -f `comm -23 $tmp/ent $tmp/pid`
pcp-5.2.2/src/pmcd/rc_pmcd-139- rm -f $tmp/ent $tmp/pid
##############################################
pcp-5.2.2/src/pmcd/rc_pmcd-154- else
pcp-5.2.2/src/pmcd/rc_pmcd:155: num=`find $PMNSDIR -newer $PMNSDIR/root -iname 'root_*' 2>/dev/null | wc -l`
pcp-5.2.2/src/pmcd/rc_pmcd-156- [ "$num" -gt 0 ] && rebuild=true
##############################################
pcp-5.2.2/src/pmcd/rc_pmcd-205- [ "$file" = "*/.Need$action" ] && break
pcp-5.2.2/src/pmcd/rc_pmcd:206: pmda=`dirname $file`
pcp-5.2.2/src/pmcd/rc_pmcd-207- if [ -d "$pmda" -a -f "$pmda/.Need$action" ]
##############################################
pcp-5.2.2/src/pmcd/rc_pmcd-241- [ "$file" = "*/$action" ] && break
pcp-5.2.2/src/pmcd/rc_pmcd:242: pmda=`dirname $file`
pcp-5.2.2/src/pmcd/rc_pmcd-243- if [ -d "$pmda" -a -f "$pmda/$action" ]
##############################################
pcp-5.2.2/src/pmcd/rc_pmcd-315- [ -s $tmp/tmp ] || continue
pcp-5.2.2/src/pmcd/rc_pmcd:316: pmsignal -s TERM `cat $tmp/tmp` > /dev/null 2>&1 &
pcp-5.2.2/src/pmcd/rc_pmcd-317- done
##############################################
pcp-5.2.2/src/pmcd/rc_pmcd-326- [ -s $tmp/tmp ] || continue
pcp-5.2.2/src/pmcd/rc_pmcd:327: pmsignal -s KILL `cat $tmp/tmp` > /dev/null 2>&1 &
pcp-5.2.2/src/pmcd/rc_pmcd-328- done
##############################################
pcp-5.2.2/src/pmcd/rc_pmcd-342- fi
pcp-5.2.2/src/pmcd/rc_pmcd:343: pidlist="`cat $tmp/tmp`"
pcp-5.2.2/src/pmcd/rc_pmcd-344- suffix=''
pcp-5.2.2/src/pmcd/rc_pmcd:345: if [ "`wc -l <$tmp/tmp | sed -e 's/ //g'`" -ne 1 ]
pcp-5.2.2/src/pmcd/rc_pmcd-346- then
##############################################
pcp-5.2.2/src/pmcd/rc_pmcd-367- then
pcp-5.2.2/src/pmcd/rc_pmcd:368: runpid=`cat $PCP_RUN_DIR/pmcd.pid`
pcp-5.2.2/src/pmcd/rc_pmcd-369- for pid in $pidlist
##############################################
pcp-5.2.2/src/pmcd/rc_pmcd-408- pmsleep 0.1
pcp-5.2.2/src/pmcd/rc_pmcd:409: delay=`expr $delay - 1`
pcp-5.2.2/src/pmcd/rc_pmcd:410: [ "$SIG" = "TERM" ] && [ `expr $delay % 10` -eq 0 ] \
pcp-5.2.2/src/pmcd/rc_pmcd-411- && $ECHO $PCP_ECHO_N ".""$PCP_ECHO_C"
##############################################
pcp-5.2.2/src/pmcd/rc_pmcd-418- sed 1q $tmp/ps
pcp-5.2.2/src/pmcd/rc_pmcd:419: for pid in `cat $tmp/tmp`
pcp-5.2.2/src/pmcd/rc_pmcd-420- do
##############################################
pcp-5.2.2/src/pmcd/rc_pmcd-461-done
pcp-5.2.2/src/pmcd/rc_pmcd:462:shift `expr $OPTIND - 1`
pcp-5.2.2/src/pmcd/rc_pmcd-463-
##############################################
pcp-5.2.2/src/pmcd/rc_pmcd-541- #
pcp-5.2.2/src/pmcd/rc_pmcd:542: for log in pmcd `sed -e '/^#/d' -e '/\[access\]/q' -e 's/[ ].*//' <$PCP_PMCDCONF_PATH`
pcp-5.2.2/src/pmcd/rc_pmcd-543- do
##############################################
pcp-5.2.2/src/pmcd/rc_pmcd-554- # only consider variables which start with PMCD or PCP
pcp-5.2.2/src/pmcd/rc_pmcd:555: `$PCP_AWK_PROG '/^PMCD/||/^PCP/ {print("export", $0)}' < $PMCDENVS 2>/dev/null`
pcp-5.2.2/src/pmcd/rc_pmcd-556-
##############################################
pcp-5.2.2/src/pmcd/src/config.c-1579- enumIx = NULL;
pcp-5.2.2/src/pmcd/src/config.c:1580: for (addr = __pmHostEntGetSockAddr(host, &enumIx);
pcp-5.2.2/src/pmcd/src/config.c-1581- addr != NULL;
pcp-5.2.2/src/pmcd/src/config.c:1582: addr = __pmHostEntGetSockAddr(host, &enumIx)) {
pcp-5.2.2/src/pmcd/src/config.c-1583- if (__pmSockAddrIsInet(addr)) {
##############################################
pcp-5.2.2/src/pmchart/views/BusyCPU-12-
pcp-5.2.2/src/pmchart/views/BusyCPU:13:tmp=`mktemp -d "$PCP_TMPFILE_DIR/pmchart-BusyCPU.XXXXXXXXX"` || exit 1
pcp-5.2.2/src/pmchart/views/BusyCPU-14-trap "rm -rf $tmp; exit" 0 1 2 3 15
##############################################
pcp-5.2.2/src/pmchart/views/BusyCPU-91- fi
pcp-5.2.2/src/pmchart/views/BusyCPU:92: i=`expr $i + 1`
pcp-5.2.2/src/pmchart/views/BusyCPU-93-done
##############################################
pcp-5.2.2/src/pmdas/GNUmakefile-69-install_pcp :: default_pcp
pcp-5.2.2/src/pmdas/GNUmakefile:70: $(INSTALL) -m 755 -d `dirname $(PCP_PMCDCONF_PATH)`
pcp-5.2.2/src/pmdas/GNUmakefile-71- $(INSTALL) -m 644 pmcd.conf $(PCP_PMCDCONF_PATH)
##############################################
pcp-5.2.2/src/pmdas/activemq/pmdaactivemq.pl-49-for my $file (pmda_config('PCP_PMDAS_DIR') . '/activemq/activemq.conf', 'activemq.conf') {
pcp-5.2.2/src/pmdas/activemq/pmdaactivemq.pl:50: eval `cat $file` unless ! -f $file;
pcp-5.2.2/src/pmdas/activemq/pmdaactivemq.pl-51-}
##############################################
pcp-5.2.2/src/pmdas/aix/GNUmakefile-37- @if [ -f ../pmcd.conf ]; then \
pcp-5.2.2/src/pmdas/aix/GNUmakefile:38: if [ `grep -c $(CONF_LINE) ../pmcd.conf` -eq 0 ]; then \
pcp-5.2.2/src/pmdas/aix/GNUmakefile-39- echo $(CONF_LINE) >> ../pmcd.conf ; \
##############################################
pcp-5.2.2/src/pmdas/apache/Install-33- :
pcp-5.2.2/src/pmdas/apache/Install:34:elif [ "X`expr 0 + $value 2>/dev/null`" != "X$value" ]
pcp-5.2.2/src/pmdas/apache/Install-35-then
##############################################
pcp-5.2.2/src/pmdas/bcc/README.md-72-
pcp-5.2.2/src/pmdas/bcc/README.md:73:On most systems `$PCP_PMDAS_DIR` is `/var/lib/pcp/pmdas`.
pcp-5.2.2/src/pmdas/bcc/README.md-74-
##############################################
pcp-5.2.2/src/pmdas/bcc/README.md-105-
pcp-5.2.2/src/pmdas/bcc/README.md:106:* Check logfile for errors: `$PCP_LOG_DIR/pmcd/bcc.log`
pcp-5.2.2/src/pmdas/bcc/README.md-107-* Check if the bcc Python module is installed: `/usr/bin/pcp python -c 'import bcc'`
##############################################
pcp-5.2.2/src/pmdas/bcc/modules/fs/ext4dist.python-63-
pcp-5.2.2/src/pmdas/bcc/modules/fs/ext4dist.python:64: def read_ext4_file_operations_addr():
pcp-5.2.2/src/pmdas/bcc/modules/fs/ext4dist.python-65- """ Read address of ext4_file_operations symbol """
##############################################
pcp-5.2.2/src/pmdas/bcc/modules/fs/ext4dist.python-73-
pcp-5.2.2/src/pmdas/bcc/modules/fs/ext4dist.python:74: self.ops_addr = read_ext4_file_operations_addr()
pcp-5.2.2/src/pmdas/bcc/modules/fs/ext4dist.python-75- if not self.ops_addr:
##############################################
pcp-5.2.2/src/pmdas/cisco/Install-71- do
pcp-5.2.2/src/pmdas/cisco/Install:72: intf=`eval ./probe $userarg $passarg $promptarg $host 2>$__tmp.err`
pcp-5.2.2/src/pmdas/cisco/Install-73- [ ! -z "$intf" ] && break
##############################################
pcp-5.2.2/src/pmdas/cisco/Install-119-
pcp-5.2.2/src/pmdas/cisco/Install:120: first=`echo "$intf" | sed -e 's/ .*//'`
pcp-5.2.2/src/pmdas/cisco/Install-121- [ -z "$first" ] && first=quit
##############################################
pcp-5.2.2/src/pmdas/cisco/Install-127- # do them all
pcp-5.2.2/src/pmdas/cisco/Install:128: for ans in `echo "$intf"`
pcp-5.2.2/src/pmdas/cisco/Install-129- do
##############################################
pcp-5.2.2/src/pmdas/cisco/Install-137- then
pcp-5.2.2/src/pmdas/cisco/Install:138: sed_ans=`echo $ans | sed -e 's;/;\\\\/;g'`
pcp-5.2.2/src/pmdas/cisco/Install:139: intf=`echo " $intf" | sed -e "s/ $sed_ans//" -e 's/^ //'`
pcp-5.2.2/src/pmdas/cisco/Install-140- else
##############################################
pcp-5.2.2/src/pmdas/cisco/telnet.c-43- enumIx = NULL;
pcp-5.2.2/src/pmdas/cisco/telnet.c:44: for (myaddr = __pmHostEntGetSockAddr(cp->hostinfo, &enumIx);
pcp-5.2.2/src/pmdas/cisco/telnet.c-45- myaddr != NULL;
pcp-5.2.2/src/pmdas/cisco/telnet.c:46: myaddr = __pmHostEntGetSockAddr(cp->hostinfo, &enumIx)) {
pcp-5.2.2/src/pmdas/cisco/telnet.c-47- /* Create a socket */
##############################################
pcp-5.2.2/src/pmdas/darwin/GNUmakefile-43- @if [ -f ../pmcd.conf ]; then \
pcp-5.2.2/src/pmdas/darwin/GNUmakefile:44: if [ `grep -c $(CONF_LINE) ../pmcd.conf` -eq 0 ]; then \
pcp-5.2.2/src/pmdas/darwin/GNUmakefile-45- echo $(CONF_LINE) >> ../pmcd.conf ; \
##############################################
pcp-5.2.2/src/pmdas/dbping/dbprobe.pl-32- './dbprobe.conf' ) { # current directory (high priority)
pcp-5.2.2/src/pmdas/dbping/dbprobe.pl:33: eval `cat $file` unless ! -f $file;
pcp-5.2.2/src/pmdas/dbping/dbprobe.pl-34-}
##############################################
pcp-5.2.2/src/pmdas/ds389/pmdads389.pl-38-for my $file (pmda_config('PCP_PMDAS_DIR') . '/ds389/ds389.conf', './ds389.conf') {
pcp-5.2.2/src/pmdas/ds389/pmdads389.pl:39: eval `cat $file` unless ! -f $file;
pcp-5.2.2/src/pmdas/ds389/pmdads389.pl-40-}
##############################################
pcp-5.2.2/src/pmdas/ds389log/pmdads389log.pl-31-for my $file (pmda_config('PCP_PMDAS_DIR') . '/ds389log/ds389log.conf', './ds389log.conf') {
pcp-5.2.2/src/pmdas/ds389log/pmdads389log.pl:32: eval `cat $file` unless ! -f $file;
pcp-5.2.2/src/pmdas/ds389log/pmdads389log.pl-33-}
##############################################
pcp-5.2.2/src/pmdas/ds389log/pmdads389log.pl-64-sub ds389log_set_ds_access_log {
pcp-5.2.2/src/pmdas/ds389log/pmdads389log.pl:65: $ds_alog = `ls -1 $ds_logd/slapd-*/access 2>/dev/null | tail -n 1`;
pcp-5.2.2/src/pmdas/ds389log/pmdads389log.pl-66- my $un = `id -un`;
##############################################
pcp-5.2.2/src/pmdas/ds389log/pmdads389log.pl-88- # Include the previous rotated log only if needed
pcp-5.2.2/src/pmdas/ds389log/pmdads389log.pl:89: my $prev_log = `ls -1rt $ds_alog.2* 2>/dev/null | tail -n 1`;
pcp-5.2.2/src/pmdas/ds389log/pmdads389log.pl-90- if ($prev_log ne '') {
pcp-5.2.2/src/pmdas/ds389log/pmdads389log.pl:91: my $lastline = `tail -n 1 $prev_log`;
pcp-5.2.2/src/pmdas/ds389log/pmdads389log.pl-92- $lastline =~ s/\[//;
##############################################
pcp-5.2.2/src/pmdas/etw/GNUmakefile-43- @if [ -f ../pmcd.conf ]; then \
pcp-5.2.2/src/pmdas/etw/GNUmakefile:44: if [ `grep -c $(CONF_LINE) ../pmcd.conf` -eq 0 ]; then \
pcp-5.2.2/src/pmdas/etw/GNUmakefile-45- echo $(CONF_LINE) >> ../pmcd.conf ; \
##############################################
pcp-5.2.2/src/pmdas/freebsd/GNUmakefile-47- @if [ -f ../pmcd.conf ]; then \
pcp-5.2.2/src/pmdas/freebsd/GNUmakefile:48: if [ `grep -c $(CONF_LINE) ../pmcd.conf` -eq 0 ]; then \
pcp-5.2.2/src/pmdas/freebsd/GNUmakefile-49- echo $(CONF_LINE) >> ../pmcd.conf ; \
##############################################
pcp-5.2.2/src/pmdas/gpfs/pmdagpfs.pl-29-for my $file (pmda_config('PCP_PMDAS_DIR') . '/gpfs/gpfs.conf', 'gpfs.conf') {
pcp-5.2.2/src/pmdas/gpfs/pmdagpfs.pl:30: eval `cat $file` unless ! -f $file;
pcp-5.2.2/src/pmdas/gpfs/pmdagpfs.pl-31-}
##############################################
pcp-5.2.2/src/pmdas/haproxy/Install-26-# Get user and connection definitions
pcp-5.2.2/src/pmdas/haproxy/Install:27:eval `$PCP_PYTHON_PROG $PCP_PMDAS_DIR/haproxy/connect --config`
pcp-5.2.2/src/pmdas/haproxy/Install-28-
##############################################
pcp-5.2.2/src/pmdas/jbd2/GNUmakefile-51- @if [ -f ../pmcd.conf ]; then \
pcp-5.2.2/src/pmdas/jbd2/GNUmakefile:52: if [ `grep -c $(CONF_LINE) ../pmcd.conf` -eq 0 ]; then \
pcp-5.2.2/src/pmdas/jbd2/GNUmakefile-53- echo $(CONF_LINE) >> ../pmcd.conf ; \
##############################################
pcp-5.2.2/src/pmdas/kvm/GNUmakefile-49- @if [ -f ../pmcd.conf ]; then \
pcp-5.2.2/src/pmdas/kvm/GNUmakefile:50: if [ `grep -c $(CONF_LINE) ../pmcd.conf` -eq 0 ]; then \
pcp-5.2.2/src/pmdas/kvm/GNUmakefile-51- echo $(CONF_LINE) >> ../pmcd.conf ; \
##############################################
pcp-5.2.2/src/pmdas/libvirt/Install-35-# Get user and uri definitions
pcp-5.2.2/src/pmdas/libvirt/Install:36:eval `$PCP_PYTHON_PROG $PCP_PMDAS_DIR/libvirt/connect --config`
pcp-5.2.2/src/pmdas/libvirt/Install-37-
##############################################
pcp-5.2.2/src/pmdas/linux/GNUmakefile-81- @if [ -f ../pmcd.conf ]; then \
pcp-5.2.2/src/pmdas/linux/GNUmakefile:82: if [ `grep -c $(CONF_LINE) ../pmcd.conf` -eq 0 ]; then \
pcp-5.2.2/src/pmdas/linux/GNUmakefile-83- echo $(CONF_LINE) >> ../pmcd.conf ; \
##############################################
pcp-5.2.2/src/pmdas/linux/proc_net_dev.c-121-static void
pcp-5.2.2/src/pmdas/linux/proc_net_dev.c:122:refresh_net_ipv4_addr(char *name, net_addr_t *addr, linux_container_t *cp)
pcp-5.2.2/src/pmdas/linux/proc_net_dev.c-123-{
##############################################
pcp-5.2.2/src/pmdas/linux/proc_net_dev.c-231-static void
pcp-5.2.2/src/pmdas/linux/proc_net_dev.c:232:refresh_net_hw_addr(char *name, net_addr_t *netip)
pcp-5.2.2/src/pmdas/linux/proc_net_dev.c-233-{
##############################################
pcp-5.2.2/src/pmdas/linux/proc_net_dev.c-362-static int
pcp-5.2.2/src/pmdas/linux/proc_net_dev.c:363:refresh_net_dev_ipv4_addr(pmInDom indom, linux_container_t *container)
pcp-5.2.2/src/pmdas/linux/proc_net_dev.c-364-{
##############################################
pcp-5.2.2/src/pmdas/linux/proc_net_dev.c-416-
pcp-5.2.2/src/pmdas/linux/proc_net_dev.c:417: refresh_net_ipv4_addr(ifr->ifr_name, netip, container);
pcp-5.2.2/src/pmdas/linux/proc_net_dev.c-418- }
##############################################
pcp-5.2.2/src/pmdas/linux/proc_net_dev.c-423-static int
pcp-5.2.2/src/pmdas/linux/proc_net_dev.c:424:refresh_net_dev_hw_addr(pmInDom indom)
pcp-5.2.2/src/pmdas/linux/proc_net_dev.c-425-{
##############################################
pcp-5.2.2/src/pmdas/linux/proc_net_dev.c-463-
pcp-5.2.2/src/pmdas/linux/proc_net_dev.c:464: refresh_net_hw_addr(devname, netip);
pcp-5.2.2/src/pmdas/linux/proc_net_dev.c-465- }
##############################################
pcp-5.2.2/src/pmdas/linux/proc_net_dev.c-471-static int
pcp-5.2.2/src/pmdas/linux/proc_net_dev.c:472:refresh_net_dev_ipv6_addr(pmInDom indom)
pcp-5.2.2/src/pmdas/linux/proc_net_dev.c-473-{
##############################################
pcp-5.2.2/src/pmdas/linux/proc_net_dev.c-568- if (need_refresh[REFRESH_NETADDR_HW])
pcp-5.2.2/src/pmdas/linux/proc_net_dev.c:569: refresh_net_dev_hw_addr(indom);
pcp-5.2.2/src/pmdas/linux/proc_net_dev.c-570-}
##############################################
pcp-5.2.2/src/pmdas/linux/proc_net_dev.c-575- if (need_refresh[REFRESH_NETADDR_INET])
pcp-5.2.2/src/pmdas/linux/proc_net_dev.c:576: refresh_net_dev_ipv4_addr(indom, cp);
pcp-5.2.2/src/pmdas/linux/proc_net_dev.c-577- if (need_refresh[REFRESH_NETADDR_IPV6])
pcp-5.2.2/src/pmdas/linux/proc_net_dev.c:578: refresh_net_dev_ipv6_addr(indom);
pcp-5.2.2/src/pmdas/linux/proc_net_dev.c-579-}
##############################################
pcp-5.2.2/src/pmdas/linux_proc/GNUmakefile-67- @if [ -f ../pmcd.conf ]; then \
pcp-5.2.2/src/pmdas/linux_proc/GNUmakefile:68: if [ `grep -c $(CONF_LINE) ../pmcd.conf` -eq 0 ]; then \
pcp-5.2.2/src/pmdas/linux_proc/GNUmakefile-69- echo $(CONF_LINE) >> ../pmcd.conf ; \
##############################################
pcp-5.2.2/src/pmdas/linux_xfs/GNUmakefile-51- @if [ -f ../pmcd.conf ]; then \
pcp-5.2.2/src/pmdas/linux_xfs/GNUmakefile:52: if [ `grep -c $(CONF_LINE) ../pmcd.conf` -eq 0 ]; then \
pcp-5.2.2/src/pmdas/linux_xfs/GNUmakefile-53- echo $(CONF_LINE) >> ../pmcd.conf ; \
##############################################
pcp-5.2.2/src/pmdas/lustre/pmdalustre.pl-37-for my $file (pmda_config('PCP_PMDAS_DIR') . '/lustre/lustre.conf', 'luster.conf') {
pcp-5.2.2/src/pmdas/lustre/pmdalustre.pl:38: eval `cat $file` unless ! -f $file;
pcp-5.2.2/src/pmdas/lustre/pmdalustre.pl-39-}
##############################################
pcp-5.2.2/src/pmdas/mailq/Install-88- #
pcp-5.2.2/src/pmdas/mailq/Install:89: ans=`echo "$ans" | sed -e 's/ //g'`
pcp-5.2.2/src/pmdas/mailq/Install-90- if [ -z "$bucketlist" ]
##############################################
pcp-5.2.2/src/pmdas/memcache/pmdamemcache.pl-34- './memcache.conf' ) {
pcp-5.2.2/src/pmdas/memcache/pmdamemcache.pl:35: eval `cat $file` unless ! -f $file;
pcp-5.2.2/src/pmdas/memcache/pmdamemcache.pl-36-}
##############################################
pcp-5.2.2/src/pmdas/mmv/GNUmakefile-46- @if [ -f ../pmcd.conf ]; then \
pcp-5.2.2/src/pmdas/mmv/GNUmakefile:47: if [ `grep -c $(CONF_LINE_PMPROXY) ../pmcd.conf` -eq 0 ]; then \
pcp-5.2.2/src/pmdas/mmv/GNUmakefile-48- echo $(CONF_LINE_PMPROXY) >> ../pmcd.conf ; \
pcp-5.2.2/src/pmdas/mmv/GNUmakefile-49- fi; \
pcp-5.2.2/src/pmdas/mmv/GNUmakefile:50: if [ `grep -c $(CONF_LINE_MMV) ../pmcd.conf` -eq 0 ]; then \
pcp-5.2.2/src/pmdas/mmv/GNUmakefile-51- echo $(CONF_LINE_MMV) >> ../pmcd.conf ; \
##############################################
pcp-5.2.2/src/pmdas/mssql/Upgrade-24-
pcp-5.2.2/src/pmdas/mssql/Upgrade:25:perlpath=`which $PCP_PERL_PROG`
pcp-5.2.2/src/pmdas/mssql/Upgrade-26-original="$PCP_PMDAS_DIR/mssql/mssql.conf"
##############################################
pcp-5.2.2/src/pmdas/mssql/Upgrade-40-
pcp-5.2.2/src/pmdas/mssql/Upgrade:41:eval \`cat $PCP_PMDAS_DIR/mssql/mssql.conf\`;
pcp-5.2.2/src/pmdas/mssql/Upgrade-42-
##############################################
pcp-5.2.2/src/pmdas/mysql/pmdamysql.pl-30- './mysql.conf' ) { # current directory (high priority)
pcp-5.2.2/src/pmdas/mysql/pmdamysql.pl:31: eval `cat $file` unless ! -f $file;
pcp-5.2.2/src/pmdas/mysql/pmdamysql.pl-32-}
##############################################
pcp-5.2.2/src/pmdas/netbsd/GNUmakefile-45- @if [ -f ../pmcd.conf ]; then \
pcp-5.2.2/src/pmdas/netbsd/GNUmakefile:46: if [ `grep -c $(CONF_LINE) ../pmcd.conf` -eq 0 ]; then \
pcp-5.2.2/src/pmdas/netbsd/GNUmakefile-47- echo $(CONF_LINE) >> ../pmcd.conf ; \
##############################################
pcp-5.2.2/src/pmdas/netcheck/modules/dns_reverse.python-65- try:
pcp-5.2.2/src/pmdas/netcheck/modules/dns_reverse.python:66: socket.gethostbyaddr("127.0.0.1")
pcp-5.2.2/src/pmdas/netcheck/modules/dns_reverse.python-67- except Exception: # pylint: disable=broad-except
##############################################
pcp-5.2.2/src/pmdas/netcheck/modules/dns_reverse.python-85- start_time = time()
pcp-5.2.2/src/pmdas/netcheck/modules/dns_reverse.python:86: res = socket.gethostbyaddr(host)
pcp-5.2.2/src/pmdas/netcheck/modules/dns_reverse.python-87- end_time = time()
##############################################
pcp-5.2.2/src/pmdas/nginx/pmdanginx.pl-28-for my $file (pmda_config('PCP_PMDAS_DIR') . '/nginx/nginx.conf', 'nginx.conf') {
pcp-5.2.2/src/pmdas/nginx/pmdanginx.pl:29: eval `cat $file` unless ! -f $file;
pcp-5.2.2/src/pmdas/nginx/pmdanginx.pl-30-}
##############################################
pcp-5.2.2/src/pmdas/openbsd/GNUmakefile-45- @if [ -f ../pmcd.conf ]; then \
pcp-5.2.2/src/pmdas/openbsd/GNUmakefile:46: if [ `grep -c $(CONF_LINE) ../pmcd.conf` -eq 0 ]; then \
pcp-5.2.2/src/pmdas/openbsd/GNUmakefile-47- echo $(CONF_LINE) >> ../pmcd.conf ; \
##############################################
pcp-5.2.2/src/pmdas/oracle/Install-34-# Get os_user definition
pcp-5.2.2/src/pmdas/oracle/Install:35:eval `perl $PCP_PMDAS_DIR/oracle/connect.pl --config`
pcp-5.2.2/src/pmdas/oracle/Install-36-
##############################################
pcp-5.2.2/src/pmdas/oracle/connect.pl-36- # print("Loading $file\n");
pcp-5.2.2/src/pmdas/oracle/connect.pl:37: eval `cat $file`;
pcp-5.2.2/src/pmdas/oracle/connect.pl-38- }
##############################################
pcp-5.2.2/src/pmdas/oracle/pmdaoracle.pl-37- './oracle.conf' ) { # current directory (high priority)
pcp-5.2.2/src/pmdas/oracle/pmdaoracle.pl:38: eval `cat $file` unless ! -f $file;
pcp-5.2.2/src/pmdas/oracle/pmdaoracle.pl-39-}
##############################################
pcp-5.2.2/src/pmdas/pmcd/GNUmakefile-36- @if [ -f ../pmcd.conf ]; then \
pcp-5.2.2/src/pmdas/pmcd/GNUmakefile:37: if [ `grep -c $(CONF_LINE) ../pmcd.conf` -eq 0 ]; then \
pcp-5.2.2/src/pmdas/pmcd/GNUmakefile-38- echo $(CONF_LINE) >> ../pmcd.conf ; \
##############################################
pcp-5.2.2/src/pmdas/pmcd/src/objstyle-38- # found a file, check it contains some definitions ...
pcp-5.2.2/src/pmdas/pmcd/src/objstyle:39: nl=`sed -e '/^#/d' -e '/^[ ]*$/d' <"$file" | wc -l | sed -e 's/ //g'`
pcp-5.2.2/src/pmdas/pmcd/src/objstyle-40- if [ "$nl" -gt 0 ]
##############################################
pcp-5.2.2/src/pmdas/postgresql/Install-33-
pcp-5.2.2/src/pmdas/postgresql/Install:34:eval `grep "^osuser=" $conf`
pcp-5.2.2/src/pmdas/postgresql/Install-35-if [ -n "$osuser" ]; then
##############################################
pcp-5.2.2/src/pmdas/postgresql/Install-42-
pcp-5.2.2/src/pmdas/postgresql/Install:43: gid=`id $osuser | sed -e 's/^.*gid=//' -e 's/(.*$//'`
pcp-5.2.2/src/pmdas/postgresql/Install-44- echo "group id for user \"$osuser\" is \"$gid\""
##############################################
pcp-5.2.2/src/pmdas/postgresql/Upgrade-24-
pcp-5.2.2/src/pmdas/postgresql/Upgrade:25:perlpath=`which $PCP_PERL_PROG`
pcp-5.2.2/src/pmdas/postgresql/Upgrade-26-original="$PCP_PMDAS_DIR/postgresql/postgresql.conf"
##############################################
pcp-5.2.2/src/pmdas/postgresql/Upgrade-40-
pcp-5.2.2/src/pmdas/postgresql/Upgrade:41:eval \`cat $PCP_PMDAS_DIR/postgresql/postgresql.conf\`;
pcp-5.2.2/src/pmdas/postgresql/Upgrade-42-
##############################################
pcp-5.2.2/src/pmdas/root/GNUmakefile-40- @if [ -f ../pmcd.conf ]; then \
pcp-5.2.2/src/pmdas/root/GNUmakefile:41: if [ `grep -c $(CONF_LINE) ../pmcd.conf` -eq 0 ]; then \
pcp-5.2.2/src/pmdas/root/GNUmakefile-42- echo $(CONF_LINE) >> ../pmcd.conf ; \
##############################################
pcp-5.2.2/src/pmdas/rsyslog/Install-26-statsfile="$PCP_LOG_DIR/rsyslog/stats"
pcp-5.2.2/src/pmdas/rsyslog/Install:27:statsdir=`dirname "$statsfile"`
pcp-5.2.2/src/pmdas/rsyslog/Install-28-
##############################################
pcp-5.2.2/src/pmdas/sample/src/events.c-274-
pcp-5.2.2/src/pmdas/sample/src/events.c:275: *vbpp = (pmValueBlock *)pmdaEventGetAddr(myarray[inst]);
pcp-5.2.2/src/pmdas/sample/src/events.c-276-
##############################################
pcp-5.2.2/src/pmdas/sample/src/events.c-473-
pcp-5.2.2/src/pmdas/sample/src/events.c:474: *vbpp = (pmValueBlock *)pmdaEventHighResGetAddr(hrarray[inst]);
pcp-5.2.2/src/pmdas/sample/src/events.c-475-
##############################################
pcp-5.2.2/src/pmdas/shping/Install-101- then
pcp-5.2.2/src/pmdas/shping/Install:102: my_dns_server=`$PCP_AWK_PROG </etc/resolv.conf '$1 == "nameserver" { print $2; exit }'`
pcp-5.2.2/src/pmdas/shping/Install-103- else
##############################################
pcp-5.2.2/src/pmdas/solaris/GNUmakefile-48- @if [ -f ../pmcd.conf ]; then \
pcp-5.2.2/src/pmdas/solaris/GNUmakefile:49: if [ `grep -c $(CONF_LINE) ../pmcd.conf` -eq 0 ]; then \
pcp-5.2.2/src/pmdas/solaris/GNUmakefile-50- echo $(CONF_LINE) >> ../pmcd.conf ; \
##############################################
pcp-5.2.2/src/pmdas/summary/Install-38- [ -z "$delta" ] && delta=10
pcp-5.2.2/src/pmdas/summary/Install:39: [ -z "`echo $delta | tr -d '[0-9]'`" ] && break
pcp-5.2.2/src/pmdas/summary/Install-40- echo "Error: interval \"$delta\" must be an integer, please try again"
##############################################
pcp-5.2.2/src/pmdas/systemd/Install-32-whoami=`which whoami 2>/dev/null`
pcp-5.2.2/src/pmdas/systemd/Install:33:haveadm="`su adm -s $whoami 2>/dev/null`"
pcp-5.2.2/src/pmdas/systemd/Install-34-if [ "x$haveadm" != "xadm" ]; then
##############################################
pcp-5.2.2/src/pmdas/trace/Install-29- numeric=0
pcp-5.2.2/src/pmdas/trace/Install:30: elif [ "X`expr 0 + $2 2>/dev/null`" != "X$2" ]
pcp-5.2.2/src/pmdas/trace/Install-31- then
##############################################
pcp-5.2.2/src/pmdas/trace/Install-223- read access
pcp-5.2.2/src/pmdas/trace/Install:224: access=`echo $access | tr -d ' '`
pcp-5.2.2/src/pmdas/trace/Install-225- [ "X$access" = "X" ] && break
##############################################
pcp-5.2.2/src/pmdas/trace/Install-230- read access
pcp-5.2.2/src/pmdas/trace/Install:231: access=`echo $access | tr -d ' '`
pcp-5.2.2/src/pmdas/trace/Install-232- if [ "X$access" != "X" ]
##############################################
pcp-5.2.2/src/pmdas/trace/Install-237- read maxconns
pcp-5.2.2/src/pmdas/trace/Install:238: maxconns=`echo $maxconns | tr -d ' '`
pcp-5.2.2/src/pmdas/trace/Install-239- [ "X$maxconns" = "X" ] && maxconns=0
##############################################
pcp-5.2.2/src/pmdas/trace/Install-245- read access
pcp-5.2.2/src/pmdas/trace/Install:246: access=`echo $access | tr -d ' '`
pcp-5.2.2/src/pmdas/trace/Install-247- [ "X$access" != "X" ] && args="$args"" -A ""disallow:$access";;
##############################################
pcp-5.2.2/src/pmdas/txmon/genload-36-done
pcp-5.2.2/src/pmdas/txmon/genload:37:shift `expr $OPTIND - 1`
pcp-5.2.2/src/pmdas/txmon/genload-38-
##############################################
pcp-5.2.2/src/pmdas/vmware/pmdavmware.pl-27- './vmware.conf' ) {
pcp-5.2.2/src/pmdas/vmware/pmdavmware.pl:28: eval `cat $file` unless ! -f $file;
pcp-5.2.2/src/pmdas/vmware/pmdavmware.pl-29-}
##############################################
pcp-5.2.2/src/pmdas/weblog/Install-68- done
pcp-5.2.2/src/pmdas/weblog/Install:69: shift `expr $OPTIND - 1`
pcp-5.2.2/src/pmdas/weblog/Install-70- if [ $# -eq 1 ]
##############################################
pcp-5.2.2/src/pmdas/weblog/Web.Allservers.pmchart-4-
pcp-5.2.2/src/pmdas/weblog/Web.Allservers.pmchart:5:tmp=`mktemp -d "$PCP_TMPFILE_DIR/pmchart_web_all.XXXXXXXXX"` || exit 1
pcp-5.2.2/src/pmdas/weblog/Web.Allservers.pmchart-6-trap "rm -rf $tmp; exit" 0 1 2 3 15
##############################################
pcp-5.2.2/src/pmdas/weblog/Web.Allservers.pmchart-10-pmprobe -I $* web.perserver.bytes.cached.total web.perserver.bytes.total > $tmp/pmprobe
pcp-5.2.2/src/pmdas/weblog/Web.Allservers.pmchart:11:l1=`head -n 1 $tmp/pmprobe`
pcp-5.2.2/src/pmdas/weblog/Web.Allservers.pmchart:12:l2=`tail -n 1 $tmp/pmprobe`
pcp-5.2.2/src/pmdas/weblog/Web.Allservers.pmchart-13-
pcp-5.2.2/src/pmdas/weblog/Web.Allservers.pmchart:14:num_caches=`echo $l1 | cut -f2 -d\ `
pcp-5.2.2/src/pmdas/weblog/Web.Allservers.pmchart:15:num_servers=`echo $l2 | cut -f2 -d\ `
pcp-5.2.2/src/pmdas/weblog/Web.Allservers.pmchart-16-if [ $num_servers -gt 0 ]
pcp-5.2.2/src/pmdas/weblog/Web.Allservers.pmchart-17-then
pcp-5.2.2/src/pmdas/weblog/Web.Allservers.pmchart:18: caches=`echo $l1 | cut -f3- -d\ `
pcp-5.2.2/src/pmdas/weblog/Web.Allservers.pmchart:19: servers=`echo $l2 | cut -f3- -d\ `
pcp-5.2.2/src/pmdas/weblog/Web.Allservers.pmchart:20:# hostname=`echo $servers | cut -f1 -d: | sed -f $tmp/sed`
pcp-5.2.2/src/pmdas/weblog/Web.Allservers.pmchart-21-
##############################################
pcp-5.2.2/src/pmdas/weblog/Web.Allservers.pmchart-34-else
pcp-5.2.2/src/pmdas/weblog/Web.Allservers.pmchart:35: message=`pmerr $num_servers | cut -f5- -d\ `
pcp-5.2.2/src/pmdas/weblog/Web.Allservers.pmchart-36- $PCP_XCONFIRM_PROG -c -B OK -header "Fatal error - cannot continue" \
##############################################
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Bytes.pmchart-4-
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Bytes.pmchart:5:tmp=`mktemp -d "$PCP_TMPFILE_DIR/pmchart_web_per_byte.XXXXXXXXX"` || exit 1
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Bytes.pmchart-6-trap "rm -rf $tmp; exit" 0 1 2 3 15
##############################################
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Bytes.pmchart-10-pmprobe -I $* web.perserver.bytes.cached.total web.perserver.bytes.total > $tmp/pmprobe
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Bytes.pmchart:11:l1=`head -n 1 $tmp/pmprobe`
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Bytes.pmchart:12:l2=`tail -n 1 $tmp/pmprobe`
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Bytes.pmchart-13-
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Bytes.pmchart:14:num_caches=`echo $l1 | cut -f2 -d\ `
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Bytes.pmchart:15:num_servers=`echo $l2 | cut -f2 -d\ `
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Bytes.pmchart-16-if [ $num_servers -gt 0 ]
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Bytes.pmchart-17-then
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Bytes.pmchart:18: caches=`echo $l1 | cut -f3- -d\ `
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Bytes.pmchart:19: servers=`echo $l2 | cut -f3- -d\ `
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Bytes.pmchart-20-
##############################################
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Bytes.pmchart-33-else
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Bytes.pmchart:34: message=`pmerr $num_servers | cut -f5- -d\ `
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Bytes.pmchart-35- $PCP_XCONFIRM_PROG -c -B OK -header "Fatal error - cannot continue" \
##############################################
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Bytes.pmchart-72-do
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Bytes.pmchart:73:server=`echo $servers | cut -f$i -d\ `
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Bytes.pmchart-74-echo $caches | grep $server >/dev/null
##############################################
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Bytes.pmchart-76-then
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Bytes.pmchart:77: j=`echo $server | sed -f $tmp/sed`
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Bytes.pmchart-78- echo Chart Title \"Bytes sent by $j\" Style stacking Legend $legendp >> $tmp/base
##############################################
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Bytes.pmchart-81-else
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Bytes.pmchart:82: j=`echo $server | sed -f $tmp/sed`
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Bytes.pmchart-83- echo Chart Title \"Total Bytes sent by $j\" Style bars Legend off>> $tmp/base
##############################################
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Bytes.pmchart-85-fi
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Bytes.pmchart:86:i=`expr $i + 1`
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Bytes.pmchart-87-done
##############################################
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Requests.pmchart-4-
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Requests.pmchart:5:tmp=`mktemp -d "$PCP_TMPFILE_DIR/pmchart_web_per_req.XXXXXXXXX"` || exit 1
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Requests.pmchart-6-trap "rm -rf $tmp; exit" 0 1 2 3 15
##############################################
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Requests.pmchart-10-pmprobe -I $* web.perserver.bytes.cached.total web.perserver.bytes.total > $tmp/pmprobe
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Requests.pmchart:11:l1=`head -n 1 $tmp/pmprobe`
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Requests.pmchart:12:l2=`tail -n 1 $tmp/pmprobe`
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Requests.pmchart-13-
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Requests.pmchart:14:num_caches=`echo $l1 | cut -f2 -d\ `
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Requests.pmchart:15:num_servers=`echo $l2 | cut -f2 -d\ `
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Requests.pmchart-16-if [ $num_servers -gt 0 ]
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Requests.pmchart-17-then
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Requests.pmchart:18: caches=`echo $l1 | cut -f3- -d\ `
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Requests.pmchart:19: servers=`echo $l2 | cut -f3- -d\ `
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Requests.pmchart-20-
##############################################
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Requests.pmchart-33-else
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Requests.pmchart:34: message=`pmerr $num_servers | cut -f5- -d\ `
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Requests.pmchart-35- $PCP_XCONFIRM_PROG -c -B OK -header "Fatal error - cannot continue" \
##############################################
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Requests.pmchart-72-do
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Requests.pmchart:73:server=`echo $servers | cut -f$i -d\ `
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Requests.pmchart-74-echo $caches | grep $server >/dev/null
##############################################
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Requests.pmchart-76-then
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Requests.pmchart:77: j=`echo $server | sed -f $tmp/sed`
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Requests.pmchart-78- echo Chart Title \"Requests satisfied by $j\" Style stacking Legend $legendp >> $tmp/base
##############################################
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Requests.pmchart-82-else
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Requests.pmchart:83: j=`echo $server | sed -f $tmp/sed`
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Requests.pmchart-84- echo Chart Title \"Total Requests satisfied by $j\" Style bars Legend off>> $tmp/base
##############################################
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Requests.pmchart-86-fi
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Requests.pmchart:87:i=`expr $i + 1`
pcp-5.2.2/src/pmdas/weblog/Web.Perserver.Requests.pmchart-88-done
##############################################
pcp-5.2.2/src/pmdas/weblog/server.sh-62-skipping="${pfx}skipping..."
pcp-5.2.2/src/pmdas/weblog/server.sh:63:tmp=`mktemp -d "$PCP_TMPFILE_DIR/pmda_weblog.XXXXXXXXX"` || exit 1
pcp-5.2.2/src/pmdas/weblog/server.sh-64-trap "rm -rf $tmp; exit" 0 1 2 3 15
##############################################
pcp-5.2.2/src/pmdas/weblog/server.sh-424- echo >$tmp/ns
pcp-5.2.2/src/pmdas/weblog/server.sh:425: for root in `echo "$NSROOTPATH" | sed -e 's/:/ /g'`
pcp-5.2.2/src/pmdas/weblog/server.sh-426- do
##############################################
pcp-5.2.2/src/pmdas/weblog/server.sh-436- cd $here
pcp-5.2.2/src/pmdas/weblog/server.sh:437: match=`grep "^$check " $tmp/ns`
pcp-5.2.2/src/pmdas/weblog/server.sh-438- if [ ! -z "$match" ]
##############################################
pcp-5.2.2/src/pmdas/weblog/server.sh-483- # fix server name as Netscape often adds a trailing '.'
pcp-5.2.2/src/pmdas/weblog/server.sh:484: serverName=`echo $serverName | sed -e 's/\.$//'`
pcp-5.2.2/src/pmdas/weblog/server.sh-485-
##############################################
pcp-5.2.2/src/pmdas/weblog/server.sh-518- then
pcp-5.2.2/src/pmdas/weblog/server.sh:519: num_lines=`wc -l $access | $PCP_AWK_PROG '{print $1}'`
pcp-5.2.2/src/pmdas/weblog/server.sh-520- if [ $num_lines -gt 1 ]
pcp-5.2.2/src/pmdas/weblog/server.sh-521- then
pcp-5.2.2/src/pmdas/weblog/server.sh:522: num_fields=`tail -n 1 $access | cut -f3 -d\" | wc -w`
pcp-5.2.2/src/pmdas/weblog/server.sh-523- if [ $num_fields -eq 11 ]
##############################################
pcp-5.2.2/src/pmdas/weblog/server.sh-610- files="link"
pcp-5.2.2/src/pmdas/weblog/server.sh:611: lines=`wc -l $tmp/zeus | $PCP_AWK_PROG '{ print $1 }'`
pcp-5.2.2/src/pmdas/weblog/server.sh-612- count=1
##############################################
pcp-5.2.2/src/pmdas/weblog/server.sh-647- _switchAction
pcp-5.2.2/src/pmdas/weblog/server.sh:648: count=`expr $count + 1`
pcp-5.2.2/src/pmdas/weblog/server.sh-649- done
##############################################
pcp-5.2.2/src/pmdas/weblog/server.sh-752-{
pcp-5.2.2/src/pmdas/weblog/server.sh:753: for apchroot in `echo "$APACHEPATH" | sed -e 's/:/ /g'`
pcp-5.2.2/src/pmdas/weblog/server.sh-754- do
##############################################
pcp-5.2.2/src/pmdas/weblog/server.sh-771-
pcp-5.2.2/src/pmdas/weblog/server.sh:772: for config in `echo ${config}*`
pcp-5.2.2/src/pmdas/weblog/server.sh-773- do
##############################################
pcp-5.2.2/src/pmdas/weblog/server.sh-1084- serverPath=$ORACLE_HOME/ows
pcp-5.2.2/src/pmdas/weblog/server.sh:1085: for i in `ls $serverPath/log/sv*.log*`
pcp-5.2.2/src/pmdas/weblog/server.sh-1086- do
pcp-5.2.2/src/pmdas/weblog/server.sh:1087: serverPort=`basename $i | sed 's/sv//' | sed 's/\.log//'`
pcp-5.2.2/src/pmdas/weblog/server.sh-1088- access=$i
##############################################
pcp-5.2.2/src/pmdas/weblog/server.sh-1201- docs=""
pcp-5.2.2/src/pmdas/weblog/server.sh:1202: docs=`$PCP_AWK_PROG -F: '$1 == "ftp" { print $6 "/pub"; exit }' < ${PASSWDPATH}`
pcp-5.2.2/src/pmdas/weblog/server.sh-1203- if [ -z "$docs" ]
##############################################
pcp-5.2.2/src/pmdas/windows/GNUmakefile-50- @if [ -f ../pmcd.conf ]; then \
pcp-5.2.2/src/pmdas/windows/GNUmakefile:51: if [ `grep -c $(CONF_LINE) ../pmcd.conf` -eq 0 ]; then \
pcp-5.2.2/src/pmdas/windows/GNUmakefile-52- echo $(CONF_LINE) >> ../pmcd.conf ; \
##############################################
pcp-5.2.2/src/pmfind/GNUmakefile-52-else
pcp-5.2.2/src/pmfind/GNUmakefile:53: $(INSTALL) -m 755 -d `dirname $(CRONTAB_PATH)`
pcp-5.2.2/src/pmfind/GNUmakefile-54- $(INSTALL) -m 644 crontab $(CRONTAB_PATH)
##############################################
pcp-5.2.2/src/pmfind/pmfind_check.sh-31-
pcp-5.2.2/src/pmfind/pmfind_check.sh:32:tmp=`mktemp -d "$PCP_TMPFILE_DIR/pmfind_check.XXXXXXXXX"` || exit 1
pcp-5.2.2/src/pmfind/pmfind_check.sh-33-status=0
pcp-5.2.2/src/pmfind/pmfind_check.sh:34:prog=`basename $0`
pcp-5.2.2/src/pmfind/pmfind_check.sh-35-PROGLOG=$PCP_LOG_DIR/pmfind/$prog.log
##############################################
pcp-5.2.2/src/pmfind/pmfind_check.sh-67-
pcp-5.2.2/src/pmfind/pmfind_check.sh:68:ARGS=`pmgetopt --progname=$prog --config=$tmp/usage -- "$@"`
pcp-5.2.2/src/pmfind/pmfind_check.sh-69-[ $? != 0 ] && exit 1
##############################################
pcp-5.2.2/src/pmfind/pmfind_check.sh-116-#
pcp-5.2.2/src/pmfind/pmfind_check.sh:117:PROGLOGDIR=`dirname "$PROGLOG"`
pcp-5.2.2/src/pmfind/pmfind_check.sh-118-[ -d "$PROGLOGDIR" ] || mkdir_and_chown "$PROGLOGDIR" 755 $PCP_USER:$PCP_GROUP 2>/dev/null
##############################################
pcp-5.2.2/src/pmgadgets/pmgadgets-args.sh-25-
pcp-5.2.2/src/pmgadgets/pmgadgets-args.sh:26:prog=`basename $0`
pcp-5.2.2/src/pmgadgets/pmgadgets-args.sh-27-
##############################################
pcp-5.2.2/src/pmgadgets/pmgadgets-args.sh-236- DISPLAY)
pcp-5.2.2/src/pmgadgets/pmgadgets-args.sh:237: ans=`$PCP_XCONFIRM_PROG -icon $icon -file $2 -useslider -header "$tag $prog" $button 2>&1`
pcp-5.2.2/src/pmgadgets/pmgadgets-args.sh-238- ;;
##############################################
pcp-5.2.2/src/pmgadgets/pmgadgets-args.sh-253- DISPLAY)
pcp-5.2.2/src/pmgadgets/pmgadgets-args.sh:254: ans=`$PCP_XCONFIRM_PROG -icon $icon -t "$*" -noframe -header "$tag $prog" $button 2>&1`
pcp-5.2.2/src/pmgadgets/pmgadgets-args.sh-255- ;;
##############################################
pcp-5.2.2/src/pmgadgets/pmgadgets-args.sh-297-
pcp-5.2.2/src/pmgadgets/pmgadgets-args.sh:298: number=`sed -n -e 2p < $tmp/pmgadgets_output`
pcp-5.2.2/src/pmgadgets/pmgadgets-args.sh-299- [ $number -le 0 ] && return 1
##############################################
pcp-5.2.2/src/pmgadgets/pmgadgets-args.sh-375-{
pcp-5.2.2/src/pmgadgets/pmgadgets-args.sh:376: if [ "X-$OPTARG" != "X`expr 0 + -$OPTARG 2>/dev/null`" ]
pcp-5.2.2/src/pmgadgets/pmgadgets-args.sh-377- then
##############################################
pcp-5.2.2/src/pmgadgets/pmgcisco.sh-19-status=1
pcp-5.2.2/src/pmgadgets/pmgcisco.sh:20:tmp=`mktemp -d "$PCP_TMPFILE_DIR/pmgcisco.XXXXXXXXX"` || exit 1
pcp-5.2.2/src/pmgadgets/pmgcisco.sh-21-trap "rm -fr $tmp; exit \$status" 0 1 2 3 15
##############################################
pcp-5.2.2/src/pmgadgets/pmgcisco.sh-88- set -- $otherArgs
pcp-5.2.2/src/pmgadgets/pmgcisco.sh:89: shift `expr $OPTIND - 1`
pcp-5.2.2/src/pmgadgets/pmgcisco.sh-90-
##############################################
pcp-5.2.2/src/pmgadgets/pmgcisco.sh-147- [ -f $tmp/done ] && break
pcp-5.2.2/src/pmgadgets/pmgcisco.sh:148: trim=`expr $trim + 1`
pcp-5.2.2/src/pmgadgets/pmgcisco.sh-149-done
##############################################
pcp-5.2.2/src/pmgadgets/pmgcisco.sh-200- }
pcp-5.2.2/src/pmgadgets/pmgcisco.sh:201:END { value='"`echo $interval | sed -e 's/[^0-9.].*/; scale=\"&\"/' | tr A-Z a-z`"'
pcp-5.2.2/src/pmgadgets/pmgcisco.sh-202- # tt is total time for plot in seconds, each bar is 1 pixel wide
##############################################
pcp-5.2.2/src/pmgadgets/pmgcluster.sh-24-status=1
pcp-5.2.2/src/pmgadgets/pmgcluster.sh:25:tmp=`mktemp -d "$PCP_TMPFILE_DIR/pmgcluster.XXXXXXXXX"` || exit 1
pcp-5.2.2/src/pmgadgets/pmgcluster.sh-26-trap "rm -fr $tmp; exit \$status" 0 1 2 3 15
pcp-5.2.2/src/pmgadgets/pmgcluster.sh-27-verbose="false"
pcp-5.2.2/src/pmgadgets/pmgcluster.sh:28:prog=`basename $0`
pcp-5.2.2/src/pmgadgets/pmgcluster.sh-29-nhosts=0
##############################################
pcp-5.2.2/src/pmgadgets/pmgcluster.sh-134- set -- $otherArgs
pcp-5.2.2/src/pmgadgets/pmgcluster.sh:135: shift `expr $OPTIND - 1`
pcp-5.2.2/src/pmgadgets/pmgcluster.sh-136-else
##############################################
pcp-5.2.2/src/pmgadgets/pmgcluster.sh-163- then
pcp-5.2.2/src/pmgadgets/pmgcluster.sh:164: hosts=`sed -e 's/[# ].*$//' $nodesfile`
pcp-5.2.2/src/pmgadgets/pmgcluster.sh:165: nhosts=`echo $hosts | wc -w`
pcp-5.2.2/src/pmgadgets/pmgcluster.sh-166- fi
##############################################
pcp-5.2.2/src/pmgadgets/pmgcluster.sh-191-then
pcp-5.2.2/src/pmgadgets/pmgcluster.sh:192: rows=`echo "sqrt($nhosts)" | bc`
pcp-5.2.2/src/pmgadgets/pmgcluster.sh-193-fi
pcp-5.2.2/src/pmgadgets/pmgcluster.sh-194-
pcp-5.2.2/src/pmgadgets/pmgcluster.sh:195:cols=`expr $nhosts / $rows`
pcp-5.2.2/src/pmgadgets/pmgcluster.sh-196-
##############################################
pcp-5.2.2/src/pmgadgets/pmgcluster.sh-248-
pcp-5.2.2/src/pmgadgets/pmgcluster.sh:249: row=`expr $row + 1`
pcp-5.2.2/src/pmgadgets/pmgcluster.sh-250- if [ $row -eq $rows ]
##############################################
pcp-5.2.2/src/pmgadgets/pmgcluster.sh-253- oy=$ytitle
pcp-5.2.2/src/pmgadgets/pmgcluster.sh:254: ox=`expr $xmax + $xgap`
pcp-5.2.2/src/pmgadgets/pmgcluster.sh:255: col=`expr $col + 1`
pcp-5.2.2/src/pmgadgets/pmgcluster.sh-256- else
pcp-5.2.2/src/pmgadgets/pmgcluster.sh:257: oy=`expr $ymax + $ygap`
pcp-5.2.2/src/pmgadgets/pmgcluster.sh-258- fi
##############################################
pcp-5.2.2/src/pmgadgets/pmgcluster.sh-260- rm -f $tmp/$host
pcp-5.2.2/src/pmgadgets/pmgcluster.sh:261: hostnum=`expr $hostnum + 1`
pcp-5.2.2/src/pmgadgets/pmgcluster.sh-262-done
##############################################
pcp-5.2.2/src/pmgadgets/pmgshping.sh-20-status=1
pcp-5.2.2/src/pmgadgets/pmgshping.sh:21:tmp=`mktemp -d "$PCP_TMPFILE_DIR/pmgshping.XXXXXXXXX"` || exit 1
pcp-5.2.2/src/pmgadgets/pmgshping.sh-22-trap "rm -fr $tmp; exit \$status" 0 1 2 3 15
##############################################
pcp-5.2.2/src/pmgadgets/pmgshping.sh-85- set -- $otherArgs
pcp-5.2.2/src/pmgadgets/pmgshping.sh:86: shift `expr $OPTIND - 1`
pcp-5.2.2/src/pmgadgets/pmgshping.sh-87-
##############################################
pcp-5.2.2/src/pmgadgets/pmgshping.sh-132-
pcp-5.2.2/src/pmgadgets/pmgshping.sh:133: interval=`cat $tmp/pmgadgets_result`
pcp-5.2.2/src/pmgadgets/pmgshping.sh-134- if [ -z "$interval" ]
##############################################
pcp-5.2.2/src/pmgadgets/pmgshping.sh-194-#
pcp-5.2.2/src/pmgadgets/pmgshping.sh:195:for tag in `cat $tmp/info`
pcp-5.2.2/src/pmgadgets/pmgshping.sh-196-do
##############################################
pcp-5.2.2/src/pmgenmap/pmgenmap.sh-24-
pcp-5.2.2/src/pmgenmap/pmgenmap.sh:25:prog=`basename $0`
pcp-5.2.2/src/pmgenmap/pmgenmap.sh-26-if [ $# -gt 1 -o "X$1" = "X-?" ]
##############################################
pcp-5.2.2/src/pmhostname/pmhostname.c-73- /* just report the first IP addresss */
pcp-5.2.2/src/pmhostname/pmhostname.c:74: for (addr = __pmHostEntGetSockAddr(hep, &enumIx);
pcp-5.2.2/src/pmhostname/pmhostname.c-75- addr != NULL;
pcp-5.2.2/src/pmhostname/pmhostname.c:76: addr = __pmHostEntGetSockAddr(hep, &enumIx)) {
pcp-5.2.2/src/pmhostname/pmhostname.c-77- char *dot = __pmSockAddrToString(addr);
##############################################
pcp-5.2.2/src/pmie/GNUmakefile-58-else
pcp-5.2.2/src/pmie/GNUmakefile:59: $(INSTALL) -m 755 -d `dirname $(CRONTAB_PATH)`
pcp-5.2.2/src/pmie/GNUmakefile-60- $(INSTALL) -m 644 crontab $(CRONTAB_PATH)
##############################################
pcp-5.2.2/src/pmie/pmie2col.sh-24-
pcp-5.2.2/src/pmie/pmie2col.sh:25:tmp=`mktemp -d "$PCP_TMPFILE_DIR/pmie2col.XXXXXXXXX"` || exit 1
pcp-5.2.2/src/pmie/pmie2col.sh-26-status=1
pcp-5.2.2/src/pmie/pmie2col.sh-27-trap "rm -rf $tmp; exit \$status" 0 1 2 3 15
pcp-5.2.2/src/pmie/pmie2col.sh:28:prog=`basename $0`
pcp-5.2.2/src/pmie/pmie2col.sh-29-
##############################################
pcp-5.2.2/src/pmie/pmie2col.sh-64-
pcp-5.2.2/src/pmie/pmie2col.sh:65:ARGS=`pmgetopt --progname=$prog --config=$tmp/usage -- "$@"`
pcp-5.2.2/src/pmie/pmie2col.sh-66-[ $? != 0 ] && exit 1
##############################################
pcp-5.2.2/src/pmie/pmie_check.sh-37- [ -z "$1" ] && return
pcp-5.2.2/src/pmie/pmie_check.sh:38: __d=`dirname $1`
pcp-5.2.2/src/pmie/pmie_check.sh:39: __real_d=`cd $__d 2>/dev/null && $PWDCMND`
pcp-5.2.2/src/pmie/pmie_check.sh-40- if [ -z "$__real_d" ]
##############################################
pcp-5.2.2/src/pmie/pmie_check.sh-43- else
pcp-5.2.2/src/pmie/pmie_check.sh:44: echo $__real_d/`basename $1`
pcp-5.2.2/src/pmie/pmie_check.sh-45- fi
##############################################
pcp-5.2.2/src/pmie/pmie_check.sh-49-#
pcp-5.2.2/src/pmie/pmie_check.sh:50:tmp=`mktemp -d "$PCP_TMPFILE_DIR/pmie_check.XXXXXXXXX"` || exit 1
pcp-5.2.2/src/pmie/pmie_check.sh-51-status=0
pcp-5.2.2/src/pmie/pmie_check.sh-52-echo >$tmp/lock
pcp-5.2.2/src/pmie/pmie_check.sh:53:prog=`basename $0`
pcp-5.2.2/src/pmie/pmie_check.sh-54-PROGLOG=$PCP_LOG_DIR/pmie/$prog.log
##############################################
pcp-5.2.2/src/pmie/pmie_check.sh-68- $PCP_SYSLOG_PROG -p daemon.error "$prog failed - see $PROGLOG"
pcp-5.2.2/src/pmie/pmie_check.sh:69: lockfile=`cat $tmp/lock 2>/dev/null`
pcp-5.2.2/src/pmie/pmie_check.sh-70- [ -n "$lockfile" ] && rm -f "$lockfile"
##############################################
pcp-5.2.2/src/pmie/pmie_check.sh-92-[ $? -eq 0 ] && PWDCMND="$PWDCMND -P"
pcp-5.2.2/src/pmie/pmie_check.sh:93:here=`$PWDCMND`
pcp-5.2.2/src/pmie/pmie_check.sh-94-
##############################################
pcp-5.2.2/src/pmie/pmie_check.sh-121-
pcp-5.2.2/src/pmie/pmie_check.sh:122:ARGS=`pmgetopt --progname=$prog --config=$tmp/usage -- "$@"`
pcp-5.2.2/src/pmie/pmie_check.sh-123-[ $? != 0 ] && exit 1
##############################################
pcp-5.2.2/src/pmie/pmie_check.sh-181-#
pcp-5.2.2/src/pmie/pmie_check.sh:182:PROGLOGDIR=`dirname "$PROGLOG"`
pcp-5.2.2/src/pmie/pmie_check.sh-183-[ -d "$PROGLOGDIR" ] || mkdir_and_chown "$PROGLOGDIR" 755 $PCP_USER:$PCP_GROUP 2>/dev/null
##############################################
pcp-5.2.2/src/pmie/pmie_check.sh-256- fi
pcp-5.2.2/src/pmie/pmie_check.sh:257: if [ -n "`find $logfile.lock ! -newer $tmp/stamp -print 2>/dev/null`" ]
pcp-5.2.2/src/pmie/pmie_check.sh-258- then
##############################################
pcp-5.2.2/src/pmie/pmie_check.sh-264- pmsleep 0.1
pcp-5.2.2/src/pmie/pmie_check.sh:265: delay=`expr $delay - 1`
pcp-5.2.2/src/pmie/pmie_check.sh-266- done
##############################################
pcp-5.2.2/src/pmie/pmie_check.sh-276- else
pcp-5.2.2/src/pmie/pmie_check.sh:277: echo "$prog: `cat $tmp/out`"
pcp-5.2.2/src/pmie/pmie_check.sh-278- fi
##############################################
pcp-5.2.2/src/pmie/pmie_check.sh-300- else
pcp-5.2.2/src/pmie/pmie_check.sh:301: logdir=`dirname $logfile`
pcp-5.2.2/src/pmie/pmie_check.sh:302: echo "Directory (`cd $logdir; $PWDCMND`) contents:"
pcp-5.2.2/src/pmie/pmie_check.sh-303- LC_TIME=POSIX ls -la $logdir
##############################################
pcp-5.2.2/src/pmie/pmie_check.sh-323- #
pcp-5.2.2/src/pmie/pmie_check.sh:324: delay=`expr \( $delay + 20 \* $x \) \* 10` # tenths of a second
pcp-5.2.2/src/pmie/pmie_check.sh-325- while [ $delay -ne 0 ]
##############################################
pcp-5.2.2/src/pmie/pmie_check.sh-344- _found=false
pcp-5.2.2/src/pmie/pmie_check.sh:345: for _p in `echo $_plist`
pcp-5.2.2/src/pmie/pmie_check.sh-346- do
##############################################
pcp-5.2.2/src/pmie/pmie_check.sh-364- $PCP_PS_PROG $PCP_PS_ALL_FLAGS | tee $tmp/tmp | sed -n -e 1p
pcp-5.2.2/src/pmie/pmie_check.sh:365: for _p in `echo $_plist`
pcp-5.2.2/src/pmie/pmie_check.sh-366- do
##############################################
pcp-5.2.2/src/pmie/pmie_check.sh-375- pmsleep 0.1
pcp-5.2.2/src/pmie/pmie_check.sh:376: delay=`expr $delay - 1`
pcp-5.2.2/src/pmie/pmie_check.sh:377: $VERBOSE && [ `expr $delay % 10` -eq 0 ] && \
pcp-5.2.2/src/pmie/pmie_check.sh-378- $PCP_ECHO_PROG $PCP_ECHO_N ".""$PCP_ECHO_C"
##############################################
pcp-5.2.2/src/pmie/pmie_check.sh-528- cd "$here"
pcp-5.2.2/src/pmie/pmie_check.sh:529: line=`expr $line + 1`
pcp-5.2.2/src/pmie/pmie_check.sh-530-
##############################################
pcp-5.2.2/src/pmie/pmie_check.sh-646- logfilehost=`hostname || echo localhost`
pcp-5.2.2/src/pmie/pmie_check.sh:647: logfile=`echo $logfile | sed -e "s;LOCALHOSTNAME;$logfilehost;"`
pcp-5.2.2/src/pmie/pmie_check.sh:648: logfile=`_unsymlink_path $logfile`
pcp-5.2.2/src/pmie/pmie_check.sh-649- [ $primary = y -o "x$host" = xLOCALHOSTNAME ] && host=local:
pcp-5.2.2/src/pmie/pmie_check.sh-650-
pcp-5.2.2/src/pmie/pmie_check.sh:651: dir=`dirname $logfile`
pcp-5.2.2/src/pmie/pmie_check.sh-652- $VERY_VERBOSE && echo "Check pmie -h $host -l $logfile ..."
##############################################
pcp-5.2.2/src/pmie/pmie_check.sh-681- fi
pcp-5.2.2/src/pmie/pmie_check.sh:682: dir=`$PWDCMND`
pcp-5.2.2/src/pmie/pmie_check.sh-683- $SHOWME && echo "+ cd $dir"
##############################################
pcp-5.2.2/src/pmie/pmie_check.sh-699-
pcp-5.2.2/src/pmie/pmie_check.sh:700: p_id=`echo $pidfile | sed -e 's,.*/,,'`
pcp-5.2.2/src/pmie/pmie_check.sh-701- p_logfile=""
##############################################
pcp-5.2.2/src/pmie/pmie_check.sh-709-
pcp-5.2.2/src/pmie/pmie_check.sh:710: p_logfile=`_unsymlink_path $p_logfile`
pcp-5.2.2/src/pmie/pmie_check.sh-711- if [ "$p_logfile" != $logfile ]
##############################################
pcp-5.2.2/src/pmie/pmie_check.sh-739- then
pcp-5.2.2/src/pmie/pmie_check.sh:740: configfile=`_get_configfile $args`
pcp-5.2.2/src/pmie/pmie_check.sh-741- if [ ! -z "$configfile" ]
##############################################
pcp-5.2.2/src/pmie/pmie_check.sh-745- #
pcp-5.2.2/src/pmie/pmie_check.sh:746: if [ ! -f "$configfile" -a "`basename $configfile`" = "$configfile" ]
pcp-5.2.2/src/pmie/pmie_check.sh-747- then
##############################################
pcp-5.2.2/src/pmie/pmie_check.sh-800- $PCP_BINADM_DIR/pmpost "start pmie from $prog for host $host"
pcp-5.2.2/src/pmie/pmie_check.sh:801: pid=`${sock_me} $PMIE -b $args >/dev/null 2>&1 & echo $!`
pcp-5.2.2/src/pmie/pmie_check.sh-802- fi
##############################################
pcp-5.2.2/src/pmie/pmie_check.sh-821-_parse_control $CONTROL
pcp-5.2.2/src/pmie/pmie_check.sh:822:append=`ls $CONTROLDIR 2>/dev/null | LC_COLLATE=POSIX sort`
pcp-5.2.2/src/pmie/pmie_check.sh-823-for controlfile in $append
##############################################
pcp-5.2.2/src/pmie/pmie_check.sh-834-then
pcp-5.2.2/src/pmie/pmie_check.sh:835: pmielist=`cat $tmp/pmies`
pcp-5.2.2/src/pmie/pmie_check.sh-836- if $PCP_PS_PROG -p "$pmielist" >/dev/null 2>&1
pcp-5.2.2/src/pmie/pmie_check.sh-837- then
pcp-5.2.2/src/pmie/pmie_check.sh:838: $VERY_VERBOSE && ( echo; $PCP_ECHO_PROG $PCP_ECHO_N "+ $KILL -KILL `cat $tmp/pmies` ...""$PCP_ECHO_C" )
pcp-5.2.2/src/pmie/pmie_check.sh-839- eval $KILL -s KILL $pmielist >/dev/null 2>&1
##############################################
pcp-5.2.2/src/pmie/pmie_check.sh-845- pmsleep 0.1
pcp-5.2.2/src/pmie/pmie_check.sh:846: delay=`expr $delay - 1`
pcp-5.2.2/src/pmie/pmie_check.sh-847- continue
##############################################
pcp-5.2.2/src/pmie/pmie_daily.sh-29- [ -z "$1" ] && return
pcp-5.2.2/src/pmie/pmie_daily.sh:30: __d=`dirname $1`
pcp-5.2.2/src/pmie/pmie_daily.sh:31: __real_d=`cd $__d 2>/dev/null && $PWDCMND`
pcp-5.2.2/src/pmie/pmie_daily.sh-32- if [ -z "$__real_d" ]
##############################################
pcp-5.2.2/src/pmie/pmie_daily.sh-35- else
pcp-5.2.2/src/pmie/pmie_daily.sh:36: echo $__real_d/`basename $1`
pcp-5.2.2/src/pmie/pmie_daily.sh-37- fi
##############################################
pcp-5.2.2/src/pmie/pmie_daily.sh-45-#
pcp-5.2.2/src/pmie/pmie_daily.sh:46:tmp=`mktemp -d "$PCP_TMPFILE_DIR/pmie_daily.XXXXXXXXX"` || exit 1
pcp-5.2.2/src/pmie/pmie_daily.sh-47-status=0
pcp-5.2.2/src/pmie/pmie_daily.sh-48-echo >$tmp/lock
pcp-5.2.2/src/pmie/pmie_daily.sh:49:prog=`basename $0`
pcp-5.2.2/src/pmie/pmie_daily.sh-50-PROGLOG=$PCP_LOG_DIR/pmie/$prog.log
##############################################
pcp-5.2.2/src/pmie/pmie_daily.sh-57- [ -s "$PROGLOG" ] || rm -f "$PROGLOG"
pcp-5.2.2/src/pmie/pmie_daily.sh:58: lockfile=`cat $tmp/lock 2>/dev/null`
pcp-5.2.2/src/pmie/pmie_daily.sh-59- [ -n "$lockfile" ] && rm -f "$lockfile"
##############################################
pcp-5.2.2/src/pmie/pmie_daily.sh-112-[ $? -eq 0 ] && PWDCMND="$PWDCMND -P"
pcp-5.2.2/src/pmie/pmie_daily.sh:113:here=`$PWDCMND`
pcp-5.2.2/src/pmie/pmie_daily.sh-114-
##############################################
pcp-5.2.2/src/pmie/pmie_daily.sh-145-
pcp-5.2.2/src/pmie/pmie_daily.sh:146:ARGS=`pmgetopt --progname=$prog --config=$tmp/usage -- "$@"`
pcp-5.2.2/src/pmie/pmie_daily.sh-147-[ $? != 0 ] && exit 1
##############################################
pcp-5.2.2/src/pmie/pmie_daily.sh-159- shift
pcp-5.2.2/src/pmie/pmie_daily.sh:160: check=`echo "$CULLAFTER" | sed -e 's/[0-9]//g'`
pcp-5.2.2/src/pmie/pmie_daily.sh-161- if [ ! -z "$check" -a X"$check" != Xforever ]
##############################################
pcp-5.2.2/src/pmie/pmie_daily.sh-190- shift
pcp-5.2.2/src/pmie/pmie_daily.sh:191: check=`echo "$COMPRESSAFTER" | sed -e 's/[0-9]//g'`
pcp-5.2.2/src/pmie/pmie_daily.sh-192- if [ ! -z "$check" ]
##############################################
pcp-5.2.2/src/pmie/pmie_daily.sh-283- do
pcp-5.2.2/src/pmie/pmie_daily.sh:284: dmax=`expr $i + 200`
pcp-5.2.2/src/pmie/pmie_daily.sh-285- [ $dmax -gt $1 ] && dmax=$1
##############################################
pcp-5.2.2/src/pmie/pmie_daily.sh-288- do
pcp-5.2.2/src/pmie/pmie_daily.sh:289: x=`pmdate -${i}d %Y%m%d`
pcp-5.2.2/src/pmie/pmie_daily.sh-290- echo "/[-.]$x/d" >>$tmp/sed1
pcp-5.2.2/src/pmie/pmie_daily.sh:291: i=`expr $i + 1`
pcp-5.2.2/src/pmie/pmie_daily.sh-292- done
##############################################
pcp-5.2.2/src/pmie/pmie_daily.sh-334- cd "$here"
pcp-5.2.2/src/pmie/pmie_daily.sh:335: line=`expr $line + 1`
pcp-5.2.2/src/pmie/pmie_daily.sh-336-
##############################################
pcp-5.2.2/src/pmie/pmie_daily.sh-401- logfilehost=`hostname || echo localhost`
pcp-5.2.2/src/pmie/pmie_daily.sh:402: logfile=`echo $logfile | sed -e "s;LOCALHOSTNAME;$logfilehost;"`
pcp-5.2.2/src/pmie/pmie_daily.sh:403: logfile=`_unsymlink_path $logfile`
pcp-5.2.2/src/pmie/pmie_daily.sh-404- [ $primary = y -o "x$host" = xLOCALHOSTNAME ] && host=local:
pcp-5.2.2/src/pmie/pmie_daily.sh-405-
pcp-5.2.2/src/pmie/pmie_daily.sh:406: dir=`dirname $logfile`
pcp-5.2.2/src/pmie/pmie_daily.sh-407- $VERY_VERBOSE && echo "Check pmie -h $host ... in $dir ..."
##############################################
pcp-5.2.2/src/pmie/pmie_daily.sh-422- fi
pcp-5.2.2/src/pmie/pmie_daily.sh:423: dir=`$PWDCMND`
pcp-5.2.2/src/pmie/pmie_daily.sh-424- $SHOWME && echo "+ cd $dir"
##############################################
pcp-5.2.2/src/pmie/pmie_daily.sh-452- fi
pcp-5.2.2/src/pmie/pmie_daily.sh:453: if [ ! -z "`find lock -newer $tmp/stamp -print 2>/dev/null`" ]
pcp-5.2.2/src/pmie/pmie_daily.sh-454- then
##############################################
pcp-5.2.2/src/pmie/pmie_daily.sh-473- else
pcp-5.2.2/src/pmie/pmie_daily.sh:474: echo "$prog: `cat $tmp/out`"
pcp-5.2.2/src/pmie/pmie_daily.sh-475- fi
##############################################
pcp-5.2.2/src/pmie/pmie_daily.sh-483- $VERY_VERBOSE && echo "Looking for logfile=$logfile"
pcp-5.2.2/src/pmie/pmie_daily.sh:484: for pidfile in `ls "$PCP_TMP_DIR/pmie"`
pcp-5.2.2/src/pmie/pmie_daily.sh-485- do
##############################################
pcp-5.2.2/src/pmie/pmie_daily.sh-498- $VERY_VERBOSE && $PCP_ECHO_PROG $PCP_ECHO_N "p_pmcd_host=$p_pmcd_host p_logfile=$p_logfile""$PCP_ECHO_C"
pcp-5.2.2/src/pmie/pmie_daily.sh:499: p_logfile=`_unsymlink_path $p_logfile`
pcp-5.2.2/src/pmie/pmie_daily.sh-500- $VERY_VERBOSE && $PCP_ECHO_PROG $PCP_ECHO_N "->$p_logfile ... ""$PCP_ECHO_C"
##############################################
pcp-5.2.2/src/pmie/pmie_daily.sh-584-_parse_control $CONTROL
pcp-5.2.2/src/pmie/pmie_daily.sh:585:append=`ls $CONTROLDIR 2>/dev/null | LC_COLLATE=POSIX sort`
pcp-5.2.2/src/pmie/pmie_daily.sh-586-for controlfile in $append
##############################################
pcp-5.2.2/src/pmie/pmie_daily.sh-593- logs=""
pcp-5.2.2/src/pmie/pmie_daily.sh:594: for logfile in `cat $tmp/mail`
pcp-5.2.2/src/pmie/pmie_daily.sh-595- do
##############################################
pcp-5.2.2/src/pmie/rc_pmie-52-pmprog=$PCP_RC_DIR/pmie
pcp-5.2.2/src/pmie/rc_pmie:53:prog=$PCP_RC_DIR/`basename $0`
pcp-5.2.2/src/pmie/rc_pmie-54-
pcp-5.2.2/src/pmie/rc_pmie:55:tmp=`mktemp -d "$PCP_TMPFILE_DIR/pmie_rc.XXXXXXXXX"` || exit 1
pcp-5.2.2/src/pmie/rc_pmie-56-status=1
##############################################
pcp-5.2.2/src/pmie/rc_pmie-103- # remove entries without a pmie process
pcp-5.2.2/src/pmie/rc_pmie:104: rm -f `comm -23 $tmp/ent $tmp/pid`
pcp-5.2.2/src/pmie/rc_pmie-105- rm -f $tmp/ent $tmp/pid
##############################################
pcp-5.2.2/src/pmie/rc_pmie-118- bgstatus=0
pcp-5.2.2/src/pmie/rc_pmie:119: bgtmp=`mktemp -d "$PCP_TMPFILE_DIR/pmie_rc_start.XXXXXXXXX"` || exit 1
pcp-5.2.2/src/pmie/rc_pmie-120- trap "rm -rf $tmp $bgtmp; exit \$bgstatus" 0 1 2 3 15
##############################################
pcp-5.2.2/src/pmie/rc_pmie-233-done
pcp-5.2.2/src/pmie/rc_pmie:234:shift `expr $OPTIND - 1`
pcp-5.2.2/src/pmie/rc_pmie-235-
##############################################
pcp-5.2.2/src/pmie/src/GNUmakefile-43-grammar.h grammar.tab.c: grammar.y
pcp-5.2.2/src/pmie/src/GNUmakefile:44: $(YACC) -d -b `basename $< .y` $< && cp `basename $@ .h`.tab.h $@
pcp-5.2.2/src/pmie/src/GNUmakefile-45-
##############################################
pcp-5.2.2/src/pmie/src/stomp.c-52- enumIx = NULL;
pcp-5.2.2/src/pmie/src/stomp.c:53: for (myaddr = __pmHostEntGetSockAddr(servinfo, &enumIx);
pcp-5.2.2/src/pmie/src/stomp.c-54- myaddr != NULL;
pcp-5.2.2/src/pmie/src/stomp.c:55: myaddr = __pmHostEntGetSockAddr(servinfo, &enumIx)) {
pcp-5.2.2/src/pmie/src/stomp.c-56- /* Create a socket */
##############################################
pcp-5.2.2/src/pmieconf/check-rules-42-done
pcp-5.2.2/src/pmieconf/check-rules:43:shift `expr $OPTIND - 1`
pcp-5.2.2/src/pmieconf/check-rules-44-if [ $# -ne 0 ]
##############################################
pcp-5.2.2/src/pmieconf/check-rules-64-
pcp-5.2.2/src/pmieconf/check-rules:65: probe=`pmprobe $source $metric`
pcp-5.2.2/src/pmieconf/check-rules:66: numval=`echo $probe | awk '{print $2}'`
pcp-5.2.2/src/pmieconf/check-rules-67- if [ $numval -lt 0 ]
##############################################
pcp-5.2.2/src/pmieconf/check-rules-75- echo "#"
pcp-5.2.2/src/pmieconf/check-rules:76: echo "# rule: `basename $rule`"
pcp-5.2.2/src/pmieconf/check-rules-77- badrule=true
##############################################
pcp-5.2.2/src/pmieconf/pmie_email-30-
pcp-5.2.2/src/pmieconf/pmie_email:31:prog=`basename $0`
pcp-5.2.2/src/pmieconf/pmie_email-32-
##############################################
pcp-5.2.2/src/pmieconf/pmie_email-42- then
pcp-5.2.2/src/pmieconf/pmie_email:43: PCP_MUA=`which $mua`
pcp-5.2.2/src/pmieconf/pmie_email-44- break
##############################################
pcp-5.2.2/src/pmieconf/xtractnames-31-
pcp-5.2.2/src/pmieconf/xtractnames:32:tmp=`mktemp -d "$PCP_TMPFILE_DIR/pmieconf-xtract.XXXXXXXXX"` || exit 1
pcp-5.2.2/src/pmieconf/xtractnames-33-trap "rm -rf $tmp; exit" 0 1 2 3 15
##############################################
pcp-5.2.2/src/pmieconf/xtractnames-49-done
pcp-5.2.2/src/pmieconf/xtractnames:50:shift `expr $OPTIND - 1`
pcp-5.2.2/src/pmieconf/xtractnames-51-
##############################################
pcp-5.2.2/src/pmlc/GNUmakefile-36-gram.tab.h gram.tab.c: gram.y
pcp-5.2.2/src/pmlc/GNUmakefile:37: $(YACC) -d -b `basename $< .y` $<
pcp-5.2.2/src/pmlc/GNUmakefile-38-
##############################################
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-31-
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:32:prog=`basename "$0"`
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-33-case "$prog"
##############################################
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-46-
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:47:tmp=`mktemp -d "$PCP_TMPFILE_DIR/$prog.XXXXXXXXX"` || exit 1
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-48-status=0
##############################################
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-107- then
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:108: _warning "removing lock file older than 30 minutes (PID `cat $__dir/lock`)"
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-109- LC_TIME=POSIX ls -l "$__dir/lock"
##############################################
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-120- pmsleep 0.1
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:121: __delay=`expr $__delay - 1`
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-122- done
##############################################
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-132- else
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:133: _error "`cat $tmp/out`"
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-134- fi
##############################################
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-139- then
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:140: echo "Lock acquired `cat $__dir/lock` `ls -l $__dir/lock`"
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-141- fi
##############################################
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-260- #
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:261: ctl_host="`echo "$ctl_line" | sed -e 's/[ ].*//'`"
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-262- if echo "$host" | grep '^[a-zA-Z0-9][a-zA-Z0-9.-]*$' >/dev/null
##############################################
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-310- fi
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:311: ctl_line=`echo "$ctl_line" | _expand_control | sed -e 's/^#!#//'`
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:312: check=`echo "$ctl_line" | wc -w | sed -e 's/ //g'`
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-313- if [ "$check" -lt 4 ]
##############################################
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-317- #
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:318: _warning "$ctl_file: insufficient fields in control line for host `echo "$ctl_line" | sed -e 's/ .*//'`"
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-319- continue
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-320- fi
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:321: primary=`echo "$ctl_line" | $PCP_AWK_PROG '{ print $2 }'`
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-322- if [ "$primary" = y ]
##############################################
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-355- else
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:356: class=`_get_class "$control" "$host" "$dir"`
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-357- fi
##############################################
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-386- fi
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:387: ninst=`wc -l <$tmp/tmp | sed -e 's/ //g'`
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-388- if [ "$ninst" -eq 0 ]
##############################################
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-429- then
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:430: dups=`$PCP_AWK_PROG <$tmp/tmp2 '{ print $2 }' | tr '\012' ' ' | sed -e 's/ *$//'`
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-431- if $EXPLICIT_CLASS
##############################################
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-466- # need space at end so hostname looks like it does in a control line
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:467: host="`echo "$2 " | _unexpand_control | sed -e 's/ $//'`"
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:468: dir="`echo "$3" | _unexpand_control`"
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-469- class=`$PCP_AWK_PROG <"$control" '
##############################################
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-587- _get_pids_by_name ${IAM} | sed -e 's/.*/^&$/' >$tmp/pids
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:588: pid=`_get_pid "$dir"`
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-589- [ -n "$pid" ] && break
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:590: i=`expr $i + 1`
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-591- pmsleep 0.1
##############################################
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-621- _get_pids_by_name ${IAM} | sed -e 's/.*/^&$/' >$tmp/pids
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:622: pid=`_get_pid "$dir"`
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-623- [ -z "$pid" ] && break
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:624: i=`expr $i + 1`
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-625- pmsleep 0.1
##############################################
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-671- #
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:672: if [ "`systemctl is-enabled ${IAM}.service`" = enabled ]
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-673- then
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:674: if [ "`systemctl is-active ${IAM}.service`" = inactive ]
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-675- then
##############################################
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-733- in
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:734: \$class=*) class=`echo "$host" | sed -e 's/.*=//'`
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-735- continue
##############################################
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-738- ;;
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:739: \#!\#*) host=`echo "$host" | sed -e 's/^#!#//'`
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-740- state="stopped by $prog"
##############################################
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-773- | sed -e 's;.*/;;'`
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:774: check=`echo "$archive" | wc -l | sed -e 's/ //g'`
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-775- if [ "$check" -gt 1 ]
##############################################
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-789- evals=''
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:790: eval `$PCP_AWK_PROG -F':' <$tmp/pmiestats '$2 == "'"$dir"'" { print "pid=" $1 " rules=" $3 " evals=" $4 }'`
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-791- [ -z "$pid" ] && pid='?'
##############################################
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-857- do
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:858: dir=`echo "$state" | sed -e 's/.*|//'`
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:859: state=`echo "$state" | sed -e 's/|.*//'`
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-860- if [ ${IAM} = pmlogger ]
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-861- then
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:862: ident=`echo "$dir" | sed -e 's;.*/;;'`
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-863- else
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:864: ident=`echo "$dir" | sed -e 's;/pmie.log;;' -e 's;.*/;;'`
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-865- fi
##############################################
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-875- do
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:876: dir=`echo "$state" | sed -e 's/.*|//'`
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:877: state=`echo "$state" | sed -e 's/|.*//'`
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:878: ident=`echo "$dir" | sed -e 's;/[^/]*$;;' -e 's;.*/;;'`
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-879- printf "$fmt" "$host" "$rules" "$evals" "$class" "$pid" "$state" "$ident"
##############################################
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-1074- then
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:1075: if [ "`cat $tmp/condition-true`" -gt 0 ]
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-1076- then
##############################################
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-1129- PCP_DERIVED_CONFIG=$tmp/derived pmprobe -v -h "$host" pm_ctl.check >$tmp/tmp
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:1130: numval=`cut -d ' ' -f 2 <$tmp/tmp`
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:1131: val=`cut -d ' ' -f 3 <$tmp/tmp`
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-1132- if [ "$numval" -gt 1 ]
##############################################
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-1171- #
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:1172: n=`cat $tmp/condition-true`
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:1173: n=`expr $n + 1`
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-1174- mv $tmp/control $tmp/control.$n
##############################################
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-1184- done
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:1185: n=`cat $tmp/condition-true`
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-1186- if [ "$n" -eq 0 ]
##############################################
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-1194- mv $tmp/control.$n $tmp/control
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:1195: POLICY="`cat $tmp/policy.1`"
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-1196- else
##############################################
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-1252- then
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:1253: ident=`sed -e "s;%h;$host;g" <$tmp/tmp`
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-1254- else
##############################################
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-1269- $CHECK -c "$CONTROLDIR/$ident"
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:1270: dir_args="`echo "$dir" | _expand_control`"
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-1271- _check_started "$dir_args" || sts=1
##############################################
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-1298- then
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:1299: check=`wc -w <$tmp/tmp | sed -e 's/ //g'`
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-1300- [ "$check" -ne 1 ] &&
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-1301- _error "[ident] section is invalid in $POLICY policy file (expect a single word, not $check words)"
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:1302: ident=`sed -e "s;%h;$host;g" <$tmp/tmp`
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-1303- else
##############################################
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-1316- #
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:1317: CLASS=`_get_policy_section "$POLICY" class`
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:1318: [ -z "$CLASS" ] && CLASS=`echo "$POLICY" | sed -e 's;.*/;;'`
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-1319- fi
##############################################
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-1365- pat_host="($host|LOCALHOSTNAME)"
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:1366: pat_dir="($dir|`echo "$dir" | sed -e "s;$host;LOCALHOSTNAME;"`)"
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-1367- else
##############################################
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-1371- _egrep -rl "^($pat_host|#!#$pat_host)[ ].*[ ]$pat_dir([ ]|$)" $CONTROLFILE $CONTROLDIR >$tmp/out
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:1372: [ -s $tmp/out ] && _error "host $host and directory $dir already defined in `cat $tmp/out`"
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-1373- if $FROM_COND_CREATE
##############################################
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-1386- $CHECK -c "$CONTROLDIR/$ident"
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:1387: dir_args="`echo "$dir" | _expand_control`"
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-1388- _check_started "$dir_args" || sts=1
##############################################
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-1409- fi
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:1410: dir=`echo "$args_dir" | _unexpand_control`
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:1411: host=`echo "$args_host " | _unexpand_control | sed -e 's/ $//'`
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-1412- # need to match either expanded or unexpanded host name, with
##############################################
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-1460- $VERBOSE && echo "Looking for ${IAM} using directory $args_dir ..."
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:1461: pid=`_get_pid "$args_dir"`
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-1462- if [ -n "$pid" ]
##############################################
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-1482- fi
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:1483: dir=`echo "$args_dir" | _unexpand_control`
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:1484: host=`echo "$args_host " | _unexpand_control | sed -e 's/ $//'`
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-1485- $PCP_AWK_PROG <"$control" >$tmp/control '
##############################################
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-1525- do
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:1526: host=`echo "$args_host " | _unexpand_control | sed -e 's/ $//'`
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-1527- if grep "^#!#$host[ ]" $control >/dev/null
##############################################
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-1532- $VERBOSE && echo "Looking for ${IAM} using directory $args_dir ..."
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:1533: pid=`_get_pid "$args_dir"`
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-1534- if [ -z "$pid" ]
##############################################
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-1556- fi
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:1557: dir=`echo "$args_dir" | _unexpand_control`
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-1558- $PCP_AWK_PROG <"$control" >$tmp/control '
##############################################
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-1576-
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:1577: [ -f $tmp/sts ] && sts="`cat $tmp/sts`"
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-1578-
##############################################
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-1609-
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:1610:ARGS=`pmgetopt --progname=$prog --config=$tmp/usage -- "$@"`
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-1611-[ $? != 0 ] && exit 1
##############################################
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-1796- #
pcp-5.2.2/src/pmlogctl/pmlogctl.sh:1797: eval "_do_`echo "$ACTION" | sed -e 's/-/_/g'`" $*
pcp-5.2.2/src/pmlogctl/pmlogctl.sh-1798- cmd_sts=$?
##############################################
pcp-5.2.2/src/pmlogger/GNUmakefile-73-else
pcp-5.2.2/src/pmlogger/GNUmakefile:74: $(INSTALL) -m 755 -d `dirname $(CRONTAB_PATH)`
pcp-5.2.2/src/pmlogger/GNUmakefile-75- $(INSTALL) -m 644 crontab $(CRONTAB_PATH)
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-33-#
pcp-5.2.2/src/pmlogger/pmlogger_check.sh:34:tmp=`mktemp -d "$PCP_TMPFILE_DIR/pmlogger_check.XXXXXXXXX"` || exit 1
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-35-status=0
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-36-echo >$tmp/lock
pcp-5.2.2/src/pmlogger/pmlogger_check.sh:37:prog=`basename $0`
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-38-PROGLOG=$PCP_LOG_DIR/pmlogger/$prog.log
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-52- $PCP_SYSLOG_PROG -p daemon.error "$prog failed - see $PROGLOG"
pcp-5.2.2/src/pmlogger/pmlogger_check.sh:53: lockfile=`cat $tmp/lock 2>/dev/null`
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-54- [ -n "$lockfile" ] && rm -f "$lockfile"
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-76-[ $? -eq 0 ] && PWDCMND="$PWDCMND -P"
pcp-5.2.2/src/pmlogger/pmlogger_check.sh:77:here=`$PWDCMND`
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-78-
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-114-
pcp-5.2.2/src/pmlogger/pmlogger_check.sh:115:ARGS=`pmgetopt --progname=$prog --config=$tmp/usage -- "$@"`
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-116-[ $? != 0 ] && exit 1
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-196-#
pcp-5.2.2/src/pmlogger/pmlogger_check.sh:197:PROGLOGDIR=`dirname "$PROGLOG"`
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-198-[ -d "$PROGLOGDIR" ] || mkdir_and_chown "$PROGLOGDIR" 755 $PCP_USER:$PCP_GROUP 2>/dev/null
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-242- now="`date '+%Y%m%d.%H.%M.%S'`"
pcp-5.2.2/src/pmlogger/pmlogger_check.sh:243: link=`echo $MYPROGLOG | sed -e "s/$prog/SaveLogs\/$prog.$now/"`
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-244- if [ ! -f "$link" ]
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-426- -l*)
pcp-5.2.2/src/pmlogger/pmlogger_check.sh:427: logfile=`echo "$a" | sed -e 's/-l//'`
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-428- break
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-435-{
pcp-5.2.2/src/pmlogger/pmlogger_check.sh:436: pid=`cat "$PCP_RUN_DIR/pmlogger.pid" 2>/dev/null`
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-437- if [ -z "$pid" ]
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-441- #
pcp-5.2.2/src/pmlogger/pmlogger_check.sh:442: pid=`ls -l $PCP_TMP_DIR/pmlogger/primary 2>/dev/null | sed -e 's;.*/\([0-9][0-9]*\)$;\1;'`
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-443- fi
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-455- _can_wait=${1-5}
pcp-5.2.2/src/pmlogger/pmlogger_check.sh:456: _limit=`expr $_can_wait \* 10`
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-457- _i=0
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-460- do
pcp-5.2.2/src/pmlogger/pmlogger_check.sh:461: _sts=`pmprobe pmcd.numclients 2>/dev/null | $PCP_AWK_PROG '{print $2}'`
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-462- if [ "${_sts:-0}" -gt 0 ]
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-469- pmsleep 0.1
pcp-5.2.2/src/pmlogger/pmlogger_check.sh:470: _i=`expr $_i + 1`
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-471- done
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-490- else
pcp-5.2.2/src/pmlogger/pmlogger_check.sh:491: logdir=`dirname "$logfile"`
pcp-5.2.2/src/pmlogger/pmlogger_check.sh:492: echo "Directory (`cd "$logdir"; $PWDCMND`) contents:"
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-493- LC_TIME=POSIX ls -la "$logdir"
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-516- #
pcp-5.2.2/src/pmlogger/pmlogger_check.sh:517: delay=`expr \( $delay + 20 \* $x \) \* 10` # tenths of a second
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-518- while [ $delay -gt 0 ]
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-535- _found=false
pcp-5.2.2/src/pmlogger/pmlogger_check.sh:536: for _p in `echo $_plist`
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-537- do
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-555- $PCP_PS_PROG $PCP_PS_ALL_FLAGS | tee $tmp/tmp | sed -n -e 1p
pcp-5.2.2/src/pmlogger/pmlogger_check.sh:556: for _p in `echo $_plist`
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-557- do
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-566- pmsleep 0.1
pcp-5.2.2/src/pmlogger/pmlogger_check.sh:567: delay=`expr $delay - 1`
pcp-5.2.2/src/pmlogger/pmlogger_check.sh:568: $VERBOSE && [ `expr $delay % 10` -eq 0 ] && \
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-569- $PCP_ECHO_PROG $PCP_ECHO_N ".""$PCP_ECHO_C"
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-617- cd "$here"
pcp-5.2.2/src/pmlogger/pmlogger_check.sh:618: line=`expr $line + 1`
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-619-
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-710- dirhostname=`hostname || echo localhost`
pcp-5.2.2/src/pmlogger/pmlogger_check.sh:711: dir=`echo $dir | sed -e "s;LOCALHOSTNAME;$dirhostname;"`
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-712- [ $primary = y -o "x$host" = xLOCALHOSTNAME ] && host=local:
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-722- #
pcp-5.2.2/src/pmlogger/pmlogger_check.sh:723: if [ "`grep $dir $tmp/dir`" = "$dir" ]
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-724- then
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-757- fi
pcp-5.2.2/src/pmlogger/pmlogger_check.sh:758: dir=`$PWDCMND`
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-759- $SHOWME && echo "+ cd $dir"
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-800- pmsleep 0.1
pcp-5.2.2/src/pmlogger/pmlogger_check.sh:801: delay=`expr $delay - 1`
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-802- done
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-818- #
pcp-5.2.2/src/pmlogger/pmlogger_check.sh:819: pid=`cat "$PCP_RUN_DIR"/pmlogger_daily.pid`
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-820- if _get_pids_by_name sh | grep "^$pid\$" >/dev/null
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-832- else
pcp-5.2.2/src/pmlogger/pmlogger_check.sh:833: echo "$prog: `cat $tmp/out`"
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-834- fi
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-846- then
pcp-5.2.2/src/pmlogger/pmlogger_check.sh:847: _host=`sed -n 2p <"$PCP_TMP_DIR/pmlogger/primary"`
pcp-5.2.2/src/pmlogger/pmlogger_check.sh:848: _arch=`sed -n 3p <"$PCP_TMP_DIR/pmlogger/primary"`
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-849- echo "... try $PCP_TMP_DIR/pmlogger/primary: host=$_host arch=$_arch"
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-881- then
pcp-5.2.2/src/pmlogger/pmlogger_check.sh:882: _host=`sed -n 2p <$log`
pcp-5.2.2/src/pmlogger/pmlogger_check.sh:883: _arch=`sed -n 3p <$log`
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-884- $PCP_ECHO_PROG $PCP_ECHO_N "... try $log host=$_host arch=$_arch: ""$PCP_ECHO_C"
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-894- then
pcp-5.2.2/src/pmlogger/pmlogger_check.sh:895: pid=`echo $log | sed -e 's,.*/,,'`
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-896- if _get_pids_by_name pmlogger | grep "^$pid\$" >/dev/null
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-912- then
pcp-5.2.2/src/pmlogger/pmlogger_check.sh:913: envs=`grep ^PMLOGGER "$PMLOGGERENVS" 2>/dev/null`
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-914- args="-P $args"
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-946-
pcp-5.2.2/src/pmlogger/pmlogger_check.sh:947: configfile=`_get_configfile $args`
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-948- if [ ! -z "$configfile" ]
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-952- #
pcp-5.2.2/src/pmlogger/pmlogger_check.sh:953: if [ ! -f "$configfile" -a "`basename $configfile`" = "$configfile" ]
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-954- then
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-1007- # The pmlogger child will be re-parented to init (aka systemd)
pcp-5.2.2/src/pmlogger/pmlogger_check.sh:1008: pid=`eval $envs '${sock_me}$PMLOGGER $args $LOGNAME >$tmp/out 2>&1 & echo $!'`
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-1009- fi
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-1051-# parse and process the control file(s)
pcp-5.2.2/src/pmlogger/pmlogger_check.sh:1052:append=`ls $CONTROLDIR 2>/dev/null | LC_COLLATE=POSIX sort | sed -e "s;^;$CONTROLDIR/;g"`
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-1053-for c in $CONTROL $append
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-1064-then
pcp-5.2.2/src/pmlogger/pmlogger_check.sh:1065: pmloggerlist=`cat $tmp/pmloggers`
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-1066- if $PCP_PS_PROG -p "$pmloggerlist" >/dev/null 2>&1
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-1075- pmsleep 0.1
pcp-5.2.2/src/pmlogger/pmlogger_check.sh:1076: delay=`expr $delay - 1`
pcp-5.2.2/src/pmlogger/pmlogger_check.sh-1077- continue
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-28-#
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh:29:tmp=`mktemp -d "$PCP_TMPFILE_DIR/pmlogger_daily.XXXXXXXXX"` || exit 1
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-30-status=0
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-31-echo >$tmp/lock
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh:32:prog=`basename $0`
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-33-PROGLOG=$PCP_LOG_DIR/pmlogger/$prog.log
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-53- fi
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh:54: lockfile=`cat $tmp/lock 2>/dev/null`
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-55- [ -n "$lockfile" ] && rm -f "$lockfile"
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-241-[ $? -eq 0 ] && PWDCMND="$PWDCMND -P"
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh:242:here=`$PWDCMND`
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-243-
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-292-
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh:293:ARGS=`pmgetopt --progname=$prog --config=$tmp/usage -- "$@"`
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-294-[ $? != 0 ] && exit 1
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-377- shift
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh:378: check=`echo "$ROLLNOTICES" | sed -e 's/[0-9]//g'`
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-379- if [ ! -z "$check" ]
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-454- then
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh:455: last_stamp=`sed -e '/^#/d' <$PCP_LOG_DIR/pmlogger/pmlogger_daily.stamp`
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-456- if [ -n "$last_stamp" ]
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-462- now_stamp=`pmdate %s`
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh:463: check=`expr $now_stamp - \( 23 \* 3600 \) - 1800`
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-464- if [ "$last_stamp" -ge "$check" ]
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-565- now="`date '+%Y%m%d.%H.%M.%S'`"
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh:566: link=`echo $MYPROGLOG | sed -e "s/$prog/SaveLogs\/$prog.$now/"`
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-567- if [ ! -f "$link" ]
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-642- pmsleep 0.1
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh:643: delay=`expr $delay - 1`
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-644- done
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-654- else
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh:655: echo "$prog: `cat $tmp/out`"
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-656- fi
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-693- then
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh:694: pri=`readlink $pidfile`
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh:695: pid=`basename "$pri"`
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-696- else
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh:697: pri=`ls -l "$pidfile" | sed -e 's/.*-> //'`
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh:698: pid=`basename "$pri"`
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-699- fi
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-751- fi
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh:752: [ -w `dirname "$NOTICES"` ] && mv -f $tmp/pcp "$MAILFILE"
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-753- fi
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-759-#
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh:760:if [ -s "$NOTICES" -a -w `dirname "$NOTICES"` ]
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-761-then
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh:762: if [ "`wc -c <"$NOTICES"`" -ge $ROLLNOTICES ]
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-763- then
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-846- then
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh:847: _host=`sed -n 2p <$log`
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh:848: _arch=`sed -n 3p <$log`
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-849- $PCP_ECHO_PROG >&2 $PCP_ECHO_N "... try $log host=$_host arch=$_arch: ""$PCP_ECHO_C"
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-859- then
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh:860: pid=`echo $log | sed -e 's,.*/,,'`
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-861- if _get_pids_by_name pmlogger | grep "^$pid\$" >/dev/null
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-881- #
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh:882: dirname=`dirname $PCP_PMLOGGERCONTROL_PATH`
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh:883: filename=`echo "$controlfile" | sed -e "s@$dirname/@@"`
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-884-
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-898- cd "$here"
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh:899: line=`expr $line + 1`
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-900-
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-918- \#!#*) # stopped by pmlogctl ... need to check this one
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh:919: host=`echo "$host" | sed -e 's/^#!#//'`
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-920- ;;
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-968- old_value="$PCP_COMPRESSAFTER"
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh:969: check=`echo "$cmd" | sed -e 's/.*=//' -e 's/ *$//'`
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-970- $PCP_BINADM_DIR/find-filter </dev/null >/dev/null 2>&1 mtime "+$check"
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-1046- dirhostname=`hostname || echo localhost`
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh:1047: dir=`echo $dir | sed -e "s;LOCALHOSTNAME;$dirhostname;"`
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-1048- [ $primary = y -o "x$host" = xLOCALHOSTNAME ] && host=local:
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-1085- cd $dir
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh:1086: dir=`$PWDCMND`
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-1087- $SHOWME && echo "+ cd $dir"
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-1149- then
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh:1150: _host=`sed -n 2p <"$PCP_TMP_DIR/pmlogger/primary"`
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh:1151: _arch=`sed -n 3p <"$PCP_TMP_DIR/pmlogger/primary"`
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-1152- $VERY_VERBOSE && echo >&2 "... try $PCP_TMP_DIR/pmlogger/primary: host=$_host arch=$_arch"
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-1228- #
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh:1229: CULLDAYS=`echo $CULLAFTER | sed -e 's/:.*//'`
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-1230- if [ "$PCP_PLATFORM" = freebsd -o "$PCP_PLATFORM" = netbsd -o "$PCP_PLATFORM" = openbsd ]
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-1235- #
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh:1236: [ "$CULLDAYS" -gt 0 ] && CULLDAYS=`expr "$CULLDAYS" - 1`
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-1237- fi
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-1253- then
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh:1254: current_base=`sed -n -e '3s;.*/;;p' <"$PCP_TMP_DIR/pmlogger/$pid"`
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-1255- if [ -n "$current_base" ]
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-1266- then
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh:1267: echo "Archive files older than `_timespec $CULLAFTER` being removed ..."
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-1268- fmt <$tmp/list | sed -e 's/^/ /'
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-1331- now_hr=`pmdate %H`
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh:1332: hr=`expr 12 + $now_hr`
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh:1333: grep "^[0-9]*`pmdate -${hr}H %y%m%d` " $tmp/list >$tmp/tmp
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-1334- mv $tmp/tmp $tmp/list
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-1399- fi
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh:1400: narch=`echo $inlist | wc -w | sed -e 's/ //g'`
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-1401- if [ "$narch" = 1 ]
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-1457- #
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh:1458: COMPRESS_PROG=`echo "$COMPRESS" | sed -e 's/[ ].*//'`
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-1459- if [ -n "$COMPRESS_PROG" ] && which "$COMPRESS_PROG" >/dev/null 2>&1
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-1478- [ $i -eq 20 ] && break
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh:1479: i=`expr $i + 1`
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-1480- sleep 1
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-1484- done
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh:1485: current_vol=`sed -n <$tmp/out -e '/^log volume/s/.*[^0-9]\([0-9][0-9]*\)$/\1/p'`
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-1486- if [ -z "$current_vol" ]
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-1522- #
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh:1523: mtime=`expr $COMPRESSAFTER - 1`
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-1524- else
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-1615- #
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh:1616: mtime=`expr $TRACE - 1`
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-1617- else
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-1656-_parse_control $CONTROL
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh:1657:append=`ls $CONTROLDIR 2>/dev/null | LC_COLLATE=POSIX sort`
pcp-5.2.2/src/pmlogger/pmlogger_daily.sh-1658-for extra in $append
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_daily_report.sh-33-status=0
pcp-5.2.2/src/pmlogger/pmlogger_daily_report.sh:34:prog=`basename $0`
pcp-5.2.2/src/pmlogger/pmlogger_daily_report.sh-35-
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_daily_report.sh-41-USE_SYSLOG=true
pcp-5.2.2/src/pmlogger/pmlogger_daily_report.sh:42:tmp=`mktemp -d "$PCP_TMPFILE_DIR/pmlogger_daily_report.XXXXXXXXX"` || exit 1
pcp-5.2.2/src/pmlogger/pmlogger_daily_report.sh-43-
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_daily_report.sh-82-
pcp-5.2.2/src/pmlogger/pmlogger_daily_report.sh:83:ARGS=`pmgetopt --progname=$prog --config=$tmp/usage -- "$@"`
pcp-5.2.2/src/pmlogger/pmlogger_daily_report.sh-84-[ $? != 0 ] && exit 1
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_daily_report.sh-134- then
pcp-5.2.2/src/pmlogger/pmlogger_daily_report.sh:135: last_stamp=`sed -e '/^#/d' <$PCP_LOG_DIR/pmlogger/pmlogger_daily_report.stamp`
pcp-5.2.2/src/pmlogger/pmlogger_daily_report.sh-136- if [ -n "$last_stamp" ]
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_daily_report.sh-142- now_stamp=`pmdate %s`
pcp-5.2.2/src/pmlogger/pmlogger_daily_report.sh:143: check=`expr $now_stamp - \( 23 \* 3600 \) - 1800`
pcp-5.2.2/src/pmlogger/pmlogger_daily_report.sh-144- if [ "$last_stamp" -ge "$check" ]
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_merge.sh-26-
pcp-5.2.2/src/pmlogger/pmlogger_merge.sh:27:prog=`basename $0`
pcp-5.2.2/src/pmlogger/pmlogger_merge.sh:28:tmp=`mktemp -d "$PCP_TMPFILE_DIR/pmlogger_merge.XXXXXXXXX"` || exit 1
pcp-5.2.2/src/pmlogger/pmlogger_merge.sh:29:tmpmerge=`mktemp -d $PCP_TMPFILE_DIR/pmlogger_merge.XXXXXXXXX` || exit 1
pcp-5.2.2/src/pmlogger/pmlogger_merge.sh-30-status=0
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_merge.sh-70-# option parsing
pcp-5.2.2/src/pmlogger/pmlogger_merge.sh:71:ARGS=`pmgetopt --progname=$prog --config=$tmp/usage -- "$@"`
pcp-5.2.2/src/pmlogger/pmlogger_merge.sh-72-[ $? != 0 ] && exit 1
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_merge.sh-136- [ "$xxx" = "$try.meta*" ] && continue
pcp-5.2.2/src/pmlogger/pmlogger_merge.sh:137: base=`echo "$xxx" | sed -e 's/\(.*\)\.meta.*/\1/'`
pcp-5.2.2/src/pmlogger/pmlogger_merge.sh-138- grep "^$base\$" $tmp/input >/dev/null || echo "$base" >>$tmp/input
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_merge.sh-144- [ "$xxx" = "$try-*.meta*" ] && continue
pcp-5.2.2/src/pmlogger/pmlogger_merge.sh:145: base=`echo "$xxx" | sed -e 's/\(.\)\.meta.*/\1/'`
pcp-5.2.2/src/pmlogger/pmlogger_merge.sh-146- grep "^$base\$" $tmp/input >/dev/null || echo "$base" >>$tmp/input
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_merge.sh-156-#
pcp-5.2.2/src/pmlogger/pmlogger_merge.sh:157:for input in `cat $tmp/input`
pcp-5.2.2/src/pmlogger/pmlogger_merge.sh-158-do
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_merge.sh-169- then
pcp-5.2.2/src/pmlogger/pmlogger_merge.sh:170: empty=`expr $empty + 1`
pcp-5.2.2/src/pmlogger/pmlogger_merge.sh-171- fi
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_merge.sh-180- echo "$prog: Warning: \"index\" file missing for archive \"$input\""
pcp-5.2.2/src/pmlogger/pmlogger_merge.sh:181: empty=`expr $empty + 1`
pcp-5.2.2/src/pmlogger/pmlogger_merge.sh-182- ;;
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_merge.sh-253- list=$tmpmerge/$part
pcp-5.2.2/src/pmlogger/pmlogger_merge.sh:254: part=`expr $part + 1`
pcp-5.2.2/src/pmlogger/pmlogger_merge.sh-255- i=0
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_merge.sh-258- $VERBOSE && $PCP_ECHO_PROG $PCP_ECHO_N " $input""$PCP_ECHO_C"
pcp-5.2.2/src/pmlogger/pmlogger_merge.sh:259: numarch=`echo $input.[0-9]* | wc -w | sed -e 's/ *//g'`
pcp-5.2.2/src/pmlogger/pmlogger_merge.sh-260- if [ $numarch -gt 1 ]
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_merge.sh-265- fi
pcp-5.2.2/src/pmlogger/pmlogger_merge.sh:266: i=`expr $i + 1`
pcp-5.2.2/src/pmlogger/pmlogger_merge.sh-267- done
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_merge.sh-298- $VERBOSE && $PCP_ECHO_PROG $PCP_ECHO_N "Removing input archive files ""$PCP_ECHO_C"
pcp-5.2.2/src/pmlogger/pmlogger_merge.sh:299: for input in `cat $tmp/input`
pcp-5.2.2/src/pmlogger/pmlogger_merge.sh-300- do
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_rewrite.sh-30-
pcp-5.2.2/src/pmlogger/pmlogger_rewrite.sh:31:prog=`basename $0`
pcp-5.2.2/src/pmlogger/pmlogger_rewrite.sh:32:tmp=`mktemp -d "$PCP_TMPFILE_DIR/pmlogger_rewrite.XXXXXXXXX"` || exit 1
pcp-5.2.2/src/pmlogger/pmlogger_rewrite.sh-33-status=0
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_rewrite.sh-50-# option parsing
pcp-5.2.2/src/pmlogger/pmlogger_rewrite.sh:51:ARGS=`pmgetopt --progname=$prog --config=$tmp/usage -- "$@"`
pcp-5.2.2/src/pmlogger/pmlogger_rewrite.sh-52-if [ $? != 0 ]
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_rewrite.sh-141-touch $tmp/archives
pcp-5.2.2/src/pmlogger/pmlogger_rewrite.sh:142:for try in `cat $tmp/args`
pcp-5.2.2/src/pmlogger/pmlogger_rewrite.sh-143-do
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_rewrite.sh-148- then
pcp-5.2.2/src/pmlogger/pmlogger_rewrite.sh:149: base=`echo "$try" | sed -e "s/$suff\$//"`
pcp-5.2.2/src/pmlogger/pmlogger_rewrite.sh-150- break
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_rewrite.sh-157- *.index)
pcp-5.2.2/src/pmlogger/pmlogger_rewrite.sh:158: base=`echo "$base" | sed -e 's/\.index$//'`
pcp-5.2.2/src/pmlogger/pmlogger_rewrite.sh-159- ;;
pcp-5.2.2/src/pmlogger/pmlogger_rewrite.sh-160- *.meta)
pcp-5.2.2/src/pmlogger/pmlogger_rewrite.sh:161: base=`echo "$base" | sed -e 's/\.meta$//'`
pcp-5.2.2/src/pmlogger/pmlogger_rewrite.sh-162- ;;
pcp-5.2.2/src/pmlogger/pmlogger_rewrite.sh-163- *.[0-9]|*.[0-9][0-9]|*.[0-9]*[0-9])
pcp-5.2.2/src/pmlogger/pmlogger_rewrite.sh:164: base=`echo "$base" | sed -e 's/\.[0-9]*[0-9]$//'`
pcp-5.2.2/src/pmlogger/pmlogger_rewrite.sh-165- ;;
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_rewrite.sh-199- else
pcp-5.2.2/src/pmlogger/pmlogger_rewrite.sh:200: check=`echo $base.meta*`
pcp-5.2.2/src/pmlogger/pmlogger_rewrite.sh-201- if $showme || _is_archive "$check"
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_rewrite.sh-217-#
pcp-5.2.2/src/pmlogger/pmlogger_rewrite.sh:218:for archive in `cat $tmp/archives`
pcp-5.2.2/src/pmlogger/pmlogger_rewrite.sh-219-do
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_rewrite.sh-225- fi
pcp-5.2.2/src/pmlogger/pmlogger_rewrite.sh:226: pid=`pmdumplog -L $archive | sed -n -e '/^PID for pmlogger: /s///p' 2>/dev/null`
pcp-5.2.2/src/pmlogger/pmlogger_rewrite.sh-227- if [ -z "$pid" ]
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_rewrite.sh-269- do
pcp-5.2.2/src/pmlogger/pmlogger_rewrite.sh:270: echo "$file `$SUM "$file" | sed -e 's/[ ][ ]*/ /g'`" >>$tmp/sum.before
pcp-5.2.2/src/pmlogger/pmlogger_rewrite.sh-271- done
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_rewrite.sh-277- do
pcp-5.2.2/src/pmlogger/pmlogger_rewrite.sh:278: echo "$file `$SUM "$file" | sed -e 's/[ ][ ]*/ /g'`" >>$tmp/sum.after
pcp-5.2.2/src/pmlogger/pmlogger_rewrite.sh-279- done
##############################################
pcp-5.2.2/src/pmlogger/pmlogger_rewrite.sh-286- do
pcp-5.2.2/src/pmlogger/pmlogger_rewrite.sh:287: old_file=`grep "^$file" $tmp/sum.before | sed -e 's/[ ].*//'`
pcp-5.2.2/src/pmlogger/pmlogger_rewrite.sh-288- if [ "$file" != "$old_file" ]
##############################################
pcp-5.2.2/src/pmlogger/rc_pmlogger-55-pmprog=$PCP_RC_DIR/pmlogger
pcp-5.2.2/src/pmlogger/rc_pmlogger:56:prog=$PCP_RC_DIR/`basename $0`
pcp-5.2.2/src/pmlogger/rc_pmlogger-57-
pcp-5.2.2/src/pmlogger/rc_pmlogger:58:tmp=`mktemp -d "$PCP_TMPFILE_DIR/pmlogger_rc.XXXXXXXXX"` || exit 1
pcp-5.2.2/src/pmlogger/rc_pmlogger-59-status=1
##############################################
pcp-5.2.2/src/pmlogger/rc_pmlogger-80- ID=id
pcp-5.2.2/src/pmlogger/rc_pmlogger:81: IAM=`$ID -u 2>/dev/null`
pcp-5.2.2/src/pmlogger/rc_pmlogger-82- if [ -z "$IAM" ]
##############################################
pcp-5.2.2/src/pmlogger/rc_pmlogger-85- #
pcp-5.2.2/src/pmlogger/rc_pmlogger:86: IAM=`$ID | sed -e 's/.*uid=//' -e 's/(.*//'`
pcp-5.2.2/src/pmlogger/rc_pmlogger-87- fi
##############################################
pcp-5.2.2/src/pmlogger/rc_pmlogger-95- bgstatus=0
pcp-5.2.2/src/pmlogger/rc_pmlogger:96: bgtmp=`mktemp -d "$PCP_TMPFILE_DIR/pmlogger_rc_start.XXXXXXXXX"` || exit 1
pcp-5.2.2/src/pmlogger/rc_pmlogger-97- trap "rm -rf $tmp $bgtmp; exit \$bgstatus" 0 1 2 3 15
##############################################
pcp-5.2.2/src/pmlogger/rc_pmlogger-174- #
pcp-5.2.2/src/pmlogger/rc_pmlogger:175: for pid in `cat $tmp/tmp`
pcp-5.2.2/src/pmlogger/rc_pmlogger-176- do
##############################################
pcp-5.2.2/src/pmlogger/rc_pmlogger-178- then
pcp-5.2.2/src/pmlogger/rc_pmlogger:179: note=`sed -n -e 4p <"$PCP_TMP_DIR/pmlogger/$pid"`
pcp-5.2.2/src/pmlogger/rc_pmlogger-180- if [ "$note" = pmlogger_check -o "$note" = pmlogger_daily -o "$note" = reexec ]
##############################################
pcp-5.2.2/src/pmlogger/rc_pmlogger-214-done
pcp-5.2.2/src/pmlogger/rc_pmlogger:215:shift `expr $OPTIND - 1`
pcp-5.2.2/src/pmlogger/rc_pmlogger-216-
##############################################
pcp-5.2.2/src/pmlogger/src/GNUmakefile-43-gram.tab.h gram.tab.c: gram.y
pcp-5.2.2/src/pmlogger/src/GNUmakefile:44: $(YACC) -d -b `basename $< .y` $<
pcp-5.2.2/src/pmlogger/src/GNUmakefile-45-
##############################################
pcp-5.2.2/src/pmlogger/utilproc.sh-80- fi
pcp-5.2.2/src/pmlogger/utilproc.sh:81: $do_shell && dir="`eval echo $dir`"
pcp-5.2.2/src/pmlogger/utilproc.sh-82-}
##############################################
pcp-5.2.2/src/pmlogmv/pmlogmv.sh-28-status=1
pcp-5.2.2/src/pmlogmv/pmlogmv.sh:29:tmp=`mktemp -d "$PCP_TMPFILE_DIR/pmlogmv.XXXXXXXXX"` || exit 1
pcp-5.2.2/src/pmlogmv/pmlogmv.sh-30-trap "rm -rf $tmp; exit \$status" 0
pcp-5.2.2/src/pmlogmv/pmlogmv.sh-31-trap "_cleanup; rm -rf $tmp; exit \$status" 1 2 3 15
pcp-5.2.2/src/pmlogmv/pmlogmv.sh:32:prog=`basename $0`
pcp-5.2.2/src/pmlogmv/pmlogmv.sh-33-
##############################################
pcp-5.2.2/src/pmlogmv/pmlogmv.sh-55-
pcp-5.2.2/src/pmlogmv/pmlogmv.sh:56:ARGS=`pmgetopt --progname=$prog --config=$tmp/usage -- "$@"`
pcp-5.2.2/src/pmlogmv/pmlogmv.sh-57-[ $? != 0 ] && exit 1
##############################################
pcp-5.2.2/src/pmlogmv/pmlogmv.sh-100-then
pcp-5.2.2/src/pmlogmv/pmlogmv.sh:101: pat=`echo $compress_suffixes | sed -e 's/\.//g' -e 's/ /|/g' -e 's/^/(/' -e 's/$/)/'`
pcp-5.2.2/src/pmlogmv/pmlogmv.sh-102-else
##############################################
pcp-5.2.2/src/pmlogmv/pmlogmv.sh-114- then
pcp-5.2.2/src/pmlogmv/pmlogmv.sh:115: base=`echo "$1" | sed -e 's/\.[a-zA-Z][a-zA-Z0-9]*$//'`
pcp-5.2.2/src/pmlogmv/pmlogmv.sh-116- else
##############################################
pcp-5.2.2/src/pmlogmv/pmlogmv.sh-121- *[0-9])
pcp-5.2.2/src/pmlogmv/pmlogmv.sh:122: old=`echo "$base" | sed -e 's/\.[0-9][0-9]*$//'`
pcp-5.2.2/src/pmlogmv/pmlogmv.sh-123- ;;
pcp-5.2.2/src/pmlogmv/pmlogmv.sh-124- *.index|*.meta)
pcp-5.2.2/src/pmlogmv/pmlogmv.sh:125: old=`echo "$base" | sed -e 's/\.[a-z][a-z]*$//'`
pcp-5.2.2/src/pmlogmv/pmlogmv.sh-126- ;;
##############################################
pcp-5.2.2/src/pmlogmv/pmlogmv.sh-146-#
pcp-5.2.2/src/pmlogmv/pmlogmv.sh:147:new=`echo "$2" | sed -e 's/\([?*[]\)/\\\\\1/g'`
pcp-5.2.2/src/pmlogmv/pmlogmv.sh-148-
##############################################
pcp-5.2.2/src/pmlogmv/pmlogmv.sh-152- xtra=''
pcp-5.2.2/src/pmlogmv/pmlogmv.sh:153: for suffix in `echo "$pat" | sed -e 's/^(//' -e 's/)$//' -e 's/|/ /g'`
pcp-5.2.2/src/pmlogmv/pmlogmv.sh-154- do
##############################################
pcp-5.2.2/src/pmlogmv/pmlogmv.sh-157- xtra=".$suffix"
pcp-5.2.2/src/pmlogmv/pmlogmv.sh:158: fname=`echo "$fname" | sed -e "s/\.$suffix\$//"`
pcp-5.2.2/src/pmlogmv/pmlogmv.sh-159- break
##############################################
pcp-5.2.2/src/pmlogmv/pmlogmv.sh-161- done
pcp-5.2.2/src/pmlogmv/pmlogmv.sh:162: part=`echo "$fname" | sed -e 's/.*\.\([^.][^.]*\)$/\1/'`$xtra
pcp-5.2.2/src/pmlogmv/pmlogmv.sh-163- $very_verbose && echo "fname=$fname -> part=$part"
##############################################
pcp-5.2.2/src/pmlogmv/pmlogmv.sh-169- then
pcp-5.2.2/src/pmlogmv/pmlogmv.sh:170: for f in `cat $tmp/old`
pcp-5.2.2/src/pmlogmv/pmlogmv.sh-171- do
##############################################
pcp-5.2.2/src/pmlogmv/pmlogmv.sh-196- then
pcp-5.2.2/src/pmlogmv/pmlogmv.sh:197: for f in `cat $tmp/new`
pcp-5.2.2/src/pmlogmv/pmlogmv.sh-198- do
##############################################
pcp-5.2.2/src/pmlogmv/pmlogmv.sh-234-#
pcp-5.2.2/src/pmlogmv/pmlogmv.sh:235:old_noregex=`echo "$old" | sed -e 's/\([?+*{\.^$|([]\)/\\\\\1/g'`
pcp-5.2.2/src/pmlogmv/pmlogmv.sh-236-$very_verbose && echo "old_noregex=$old_noregex"
pcp-5.2.2/src/pmlogmv/pmlogmv.sh:237:old_noglob=`echo "$old" | sed -e 's/\([?*[]\)/\\\\\1/g'`
pcp-5.2.2/src/pmlogmv/pmlogmv.sh-238-$very_verbose && echo "old_noglob=$old_noglob"
##############################################
pcp-5.2.2/src/pmlogmv/pmlogmv.sh-313-then
pcp-5.2.2/src/pmlogmv/pmlogmv.sh:314: echo "source files: `tr '[\012]' ' ' <$tmp/old`"
pcp-5.2.2/src/pmlogmv/pmlogmv.sh-315-fi
##############################################
pcp-5.2.2/src/pmlogmv/pmlogmv.sh-318-#
pcp-5.2.2/src/pmlogmv/pmlogmv.sh:319:for f in `cat $tmp/old`
pcp-5.2.2/src/pmlogmv/pmlogmv.sh-320-do
##############################################
pcp-5.2.2/src/pmlogmv/pmlogmv.sh-350-#
pcp-5.2.2/src/pmlogmv/pmlogmv.sh:351:for f in `cat $tmp/old`
pcp-5.2.2/src/pmlogmv/pmlogmv.sh-352-do
##############################################
pcp-5.2.2/src/pmlogmv/pmlogmv.sh-359- fi
pcp-5.2.2/src/pmlogmv/pmlogmv.sh:360: links=`eval _count_links $f`
pcp-5.2.2/src/pmlogmv/pmlogmv.sh-361- xpect=2
##############################################
pcp-5.2.2/src/pmlogsize/indom_check-47- # 2NSTSPTRblue#
pcp-5.2.2/src/pmlogsize/indom_check:48: nrec=`grep "^InDoTIME" <$tmp.indom | wc -l | sed -e 's/ //g'`
pcp-5.2.2/src/pmlogsize/indom_check:49: ninst=`grep "^[0-9]" <$tmp.indom | wc -l | sed -e 's/ //g'`
pcp-5.2.2/src/pmlogsize/indom_check:50: bytes=`grep "^[0-9]" <$tmp.indom | wc -c | sed -e 's/ //g'`
pcp-5.2.2/src/pmlogsize/indom_check:51: nuniqinst=`grep "^[0-9]" <$tmp.indom | sort | uniq | wc -l | sed -e 's/ //g'`
pcp-5.2.2/src/pmlogsize/indom_check-52- if [ $ninst -ne $nuniqinst ]
pcp-5.2.2/src/pmlogsize/indom_check-53- then
pcp-5.2.2/src/pmlogsize/indom_check:54: uniqbytes=`grep "^[0-9]" <$tmp.indom | sort | uniq | wc -c | sed -e 's/ //g'`
pcp-5.2.2/src/pmlogsize/indom_check:55: ndupinst=`expr $ninst - $nuniqinst`
pcp-5.2.2/src/pmlogsize/indom_check:56: dupbytes=`expr $bytes - $uniqbytes`
pcp-5.2.2/src/pmlogsize/indom_check:57: bytes=`expr $bytes + $nrec \* 20`
pcp-5.2.2/src/pmlogsize/indom_check-58- echo "$indom: $bytes bytes [$nrec records, $ninst instances ($dupbytes bytes for $ndupinst dups]"
pcp-5.2.2/src/pmlogsize/indom_check-59- else
pcp-5.2.2/src/pmlogsize/indom_check:60: bytes=`expr $bytes + $nrec \* 20`
pcp-5.2.2/src/pmlogsize/indom_check-61- echo "$indom: $bytes bytes [$nrec records, $ninst instances]"
##############################################
pcp-5.2.2/src/pmlogsummary/pmdiff.sh-21-
pcp-5.2.2/src/pmlogsummary/pmdiff.sh:22:tmp=`mktemp -d "$PCP_TMPFILE_DIR/pmlogsummary.XXXXXXXXX"` || exit 1
pcp-5.2.2/src/pmlogsummary/pmdiff.sh-23-status=1
pcp-5.2.2/src/pmlogsummary/pmdiff.sh-24-trap "rm -rf $tmp; exit \$status" 0 1 2 3 15
pcp-5.2.2/src/pmlogsummary/pmdiff.sh:25:prog=`basename $0`
pcp-5.2.2/src/pmlogsummary/pmdiff.sh-26-
##############################################
pcp-5.2.2/src/pmlogsummary/pmdiff.sh-89-
pcp-5.2.2/src/pmlogsummary/pmdiff.sh:90:ARGS=`pmgetopt --progname=$prog --config=$tmp/usage -- "$@"`
pcp-5.2.2/src/pmlogsummary/pmdiff.sh-91-[ $? != 0 ] && exit 1
##############################################
pcp-5.2.2/src/pmlogsummary/pmdiff.sh-169-[ $precision -lt 3 -o $precision -gt 15 ] && precision=3
pcp-5.2.2/src/pmlogsummary/pmdiff.sh:170:colwidth=`expr 12 + $precision`
pcp-5.2.2/src/pmlogsummary/pmdiff.sh-171-
##############################################
pcp-5.2.2/src/pmlogsummary/pmdiff.sh-275-
pcp-5.2.2/src/pmlogsummary/pmdiff.sh:276:a1=`basename "$arch1"`
pcp-5.2.2/src/pmlogsummary/pmdiff.sh:277:a2=`basename "$arch2"`
pcp-5.2.2/src/pmlogsummary/pmdiff.sh-278-echo "$thres" | awk '
##############################################
pcp-5.2.2/src/pmns/Make.stdpmid-20-then
pcp-5.2.2/src/pmns/Make.stdpmid:21: tmp=`mktemp -d "$PCP_TMPFILE_DIR/pmns_stdpmid.XXXXXXXXX"` || exit 1
pcp-5.2.2/src/pmns/Make.stdpmid-22-else
##############################################
pcp-5.2.2/src/pmns/Make.stdpmid-25- #
pcp-5.2.2/src/pmns/Make.stdpmid:26: tmp=`mktemp -d "$PCP_TMPFILE_DIR/pmns_stdpmid.XXXXXXXXX"` || exit 1
pcp-5.2.2/src/pmns/Make.stdpmid-27-fi
##############################################
pcp-5.2.2/src/pmns/Make.stdpmid-30-
pcp-5.2.2/src/pmns/Make.stdpmid:31:prog=`basename $0`
pcp-5.2.2/src/pmns/Make.stdpmid-32-OLD=stdpmid
##############################################
pcp-5.2.2/src/pmns/Rebuild-77-
pcp-5.2.2/src/pmns/Rebuild:78:prog=`basename $0`
pcp-5.2.2/src/pmns/Rebuild-79-debug=false
##############################################
pcp-5.2.2/src/pmns/Rebuild-152- _trace "Exclude these top-level names ..."
pcp-5.2.2/src/pmns/Rebuild:153: _trace "`echo $EXCLUDE | fmt | sed -e 's/^/ /'`"
pcp-5.2.2/src/pmns/Rebuild-154- fi
##############################################
pcp-5.2.2/src/pmns/Rebuild-212-done
pcp-5.2.2/src/pmns/Rebuild:213:shift `expr $OPTIND - 1`
pcp-5.2.2/src/pmns/Rebuild-214-
##############################################
pcp-5.2.2/src/pmns/Rebuild-339- done
pcp-5.2.2/src/pmns/Rebuild:340: mergelist="`cat $tmp/mergelist`"
pcp-5.2.2/src/pmns/Rebuild-341-fi
##############################################
pcp-5.2.2/src/pmns/ReplacePmnsSubtree-37-
pcp-5.2.2/src/pmns/ReplacePmnsSubtree:38:prog=`basename $0`
pcp-5.2.2/src/pmns/ReplacePmnsSubtree-39-while getopts n:\? c
##############################################
pcp-5.2.2/src/pmns/ReplacePmnsSubtree-66-newSubtreeFile=$2
pcp-5.2.2/src/pmns/ReplacePmnsSubtree:67:namespaceDir=`dirname $namespace`
pcp-5.2.2/src/pmns/ReplacePmnsSubtree-68-
##############################################
pcp-5.2.2/src/pmns/lockpmns-32- #
pcp-5.2.2/src/pmns/lockpmns:33: #DEBUG# echo "pmnslock: `date; ls -li $lock`"
pcp-5.2.2/src/pmns/lockpmns-34- break
##############################################
pcp-5.2.2/src/pmns/lockpmns-42- sleep 5
pcp-5.2.2/src/pmns/lockpmns:43: i=`expr $i + 1`
pcp-5.2.2/src/pmns/lockpmns-44-done
##############################################
pcp-5.2.2/src/pmns/pmnsadd-22-exitsts=1
pcp-5.2.2/src/pmns/pmnsadd:23:tmp=`mktemp -d $PCP_TMPFILE_DIR/pmnsadd.XXXXXXXXX` || exit 1
pcp-5.2.2/src/pmns/pmnsadd:24:prog=`basename $0`
pcp-5.2.2/src/pmns/pmnsadd-25-trap "rm -rf $tmp; exit \$exitsts" 0 1 2 3 15
##############################################
pcp-5.2.2/src/pmns/pmnsadd-47-done
pcp-5.2.2/src/pmns/pmnsadd:48:shift `expr $OPTIND - 1`
pcp-5.2.2/src/pmns/pmnsadd-49-
##############################################
pcp-5.2.2/src/pmns/pmnsadd-86- #
pcp-5.2.2/src/pmns/pmnsadd:87: subroot=`$PCP_AWK_PROG <"$1" 'NF >= 2 && $2 == "{" { print $1 ; exit }'`
pcp-5.2.2/src/pmns/pmnsadd-88- echo 'root {' >$tmp/tmp
pcp-5.2.2/src/pmns/pmnsadd-89- path=""
pcp-5.2.2/src/pmns/pmnsadd:90: for name in `echo "$subroot" | tr '.' ' '`
pcp-5.2.2/src/pmns/pmnsadd-91- do
##############################################
pcp-5.2.2/src/pmns/unlockpmns-25-
pcp-5.2.2/src/pmns/unlockpmns:26:#DEBUG# echo "pmnsunlock: `date; ls -li $lock`"
pcp-5.2.2/src/pmns/unlockpmns-27-
##############################################
pcp-5.2.2/src/pmproxy/rc_pmproxy-56-pmprog=$PCP_RC_DIR/pmproxy
pcp-5.2.2/src/pmproxy/rc_pmproxy:57:prog=$PCP_RC_DIR/`basename $0`
pcp-5.2.2/src/pmproxy/rc_pmproxy-58-
pcp-5.2.2/src/pmproxy/rc_pmproxy:59:tmp=`mktemp -d "$PCP_TMPFILE_DIR/pmproxy_rc.XXXXXXXXX"` || exit 1
pcp-5.2.2/src/pmproxy/rc_pmproxy-60-status=1
##############################################
pcp-5.2.2/src/pmproxy/rc_pmproxy-82-
pcp-5.2.2/src/pmproxy/rc_pmproxy:83: IAM=`$ID -u 2>/dev/null`
pcp-5.2.2/src/pmproxy/rc_pmproxy-84- if [ -z "$IAM" ]
##############################################
pcp-5.2.2/src/pmproxy/rc_pmproxy-87- #
pcp-5.2.2/src/pmproxy/rc_pmproxy:88: IAM=`$ID | sed -e 's/.*uid=//' -e 's/(.*//'`
pcp-5.2.2/src/pmproxy/rc_pmproxy-89- fi
##############################################
pcp-5.2.2/src/pmproxy/rc_pmproxy-134- sed 1q $tmp/ps
pcp-5.2.2/src/pmproxy/rc_pmproxy:135: for pid in `cat $tmp/tmp`
pcp-5.2.2/src/pmproxy/rc_pmproxy-136- do
##############################################
pcp-5.2.2/src/pmproxy/rc_pmproxy-180-done
pcp-5.2.2/src/pmproxy/rc_pmproxy:181:shift `expr $OPTIND - 1`
pcp-5.2.2/src/pmproxy/rc_pmproxy-182-
##############################################
pcp-5.2.2/src/pmproxy/rc_pmproxy-270- # only consider variables which start with PMPROXY
pcp-5.2.2/src/pmproxy/rc_pmproxy:271: `sed -n 's/^PMPROXY/export PMPROXY/p' < $PMPROXYENVS 2>/dev/null`
pcp-5.2.2/src/pmproxy/rc_pmproxy-272-
##############################################
pcp-5.2.2/src/pmproxy/src/pcp.c-154- uv_tcp_init(proxy->events, &client->u.pcp.socket);
pcp-5.2.2/src/pmproxy/src/pcp.c:155: uv_ip4_addr(client->u.pcp.hostname, client->u.pcp.port, &pmcd);
pcp-5.2.2/src/pmproxy/src/pcp.c-156- uv_tcp_connect(&client->u.pcp.pmcd, &client->u.pcp.socket,
##############################################
pcp-5.2.2/src/pmproxy/src/server.c-648- strcmp(address, "INADDR_LOOPBACK") != 0) {
pcp-5.2.2/src/pmproxy/src/server.c:649: addr = __pmStringToSockAddr(address);
pcp-5.2.2/src/pmproxy/src/server.c-650- if (__pmSockAddrGetFamily(addr) == AF_UNSPEC)
##############################################
pcp-5.2.2/src/pmsignal/pmsignal.sh-22-status=1
pcp-5.2.2/src/pmsignal/pmsignal.sh:23:tmp=`mktemp -d "$PCP_TMPFILE_DIR/pmsignal.XXXXXXXXX"` || exit 1
pcp-5.2.2/src/pmsignal/pmsignal.sh-24-trap "rm -rf $tmp; exit \$status" 0 1 2 3 15
pcp-5.2.2/src/pmsignal/pmsignal.sh:25:prog=`basename $0`
pcp-5.2.2/src/pmsignal/pmsignal.sh-26-sigs="HUP USR1 USR2 TERM KILL"
##############################################
pcp-5.2.2/src/pmsignal/pmsignal.sh-62-
pcp-5.2.2/src/pmsignal/pmsignal.sh:63:ARGS=`pmgetopt --progname=$prog --config=$tmp/usage -- "$@"`
pcp-5.2.2/src/pmsignal/pmsignal.sh-64-[ $? != 0 ] && exit 1
##############################################
pcp-5.2.2/src/pmsignal/pmsignal.sh-74- -p) pflag=true ;;
pcp-5.2.2/src/pmsignal/pmsignal.sh:75: -s) signal=`check "$2"`
pcp-5.2.2/src/pmsignal/pmsignal.sh-76- shift
##############################################
pcp-5.2.2/src/pmsignal/pmsignal.sh-96- for name in "$@"; do
pcp-5.2.2/src/pmsignal/pmsignal.sh:97: program=`basename "$name"`
pcp-5.2.2/src/pmsignal/pmsignal.sh:98: pidlist=`_get_pids_by_name -a "$program"`
pcp-5.2.2/src/pmsignal/pmsignal.sh-99- pids="$pids $pidlist"
##############################################
pcp-5.2.2/src/pmsignal/pmsignal.sh-104- for name in "$@"; do
pcp-5.2.2/src/pmsignal/pmsignal.sh:105: program=`basename "$name"`
pcp-5.2.2/src/pmsignal/pmsignal.sh:106: pidlist=`cat "$PCP_RUN_DIR/${program}.pid" 2>/dev/null`
pcp-5.2.2/src/pmsignal/pmsignal.sh-107- pids="$pids $pidlist"
##############################################
pcp-5.2.2/src/pmsnap/GNUmakefile-25- $(INSTALL) -m 644 -t $(CONFIGVAR) Snap crontab summary.html $(CONFIGETC)
pcp-5.2.2/src/pmsnap/GNUmakefile:26: $(INSTALL) -m 755 -d `dirname $(PCP_PMSNAPCONTROL_PATH)`
pcp-5.2.2/src/pmsnap/GNUmakefile-27- $(INSTALL) -m 644 control $(PCP_PMSNAPCONTROL_PATH)
##############################################
pcp-5.2.2/src/pmsnap/pmsnap.sh-22-
pcp-5.2.2/src/pmsnap/pmsnap.sh:23:tmp=`mktemp -d "$PCP_TMPFILE_DIR/pmsnap.XXXXXXXXX"` || exit 1
pcp-5.2.2/src/pmsnap/pmsnap.sh-24-trap "rm -rf $tmp; exit 0" 0 1 2 3 15
pcp-5.2.2/src/pmsnap/pmsnap.sh:25:prog=`basename $0`
pcp-5.2.2/src/pmsnap/pmsnap.sh-26-
##############################################
pcp-5.2.2/src/pmsnap/pmsnap.sh-103- while [ -f /tmp/.X$id-lock ]; do
pcp-5.2.2/src/pmsnap/pmsnap.sh:104: id=`expr $id + 1`
pcp-5.2.2/src/pmsnap/pmsnap.sh-105- done
##############################################
pcp-5.2.2/src/pmsnap/pmsnap.sh-176-then
pcp-5.2.2/src/pmsnap/pmsnap.sh:177: shift `expr $OPTIND - 1`
pcp-5.2.2/src/pmsnap/pmsnap.sh-178- [ $# -ne 0 ] && _usage
##############################################
pcp-5.2.2/src/pmsnap/pmsnap.sh-201-#
pcp-5.2.2/src/pmsnap/pmsnap.sh:202:names=`echo "$names" | sed -e 's;/;\\\\/;g'`
pcp-5.2.2/src/pmsnap/pmsnap.sh:203:configs=`echo "$configs" | sed -e 's;/;\\\\/;g'`
pcp-5.2.2/src/pmsnap/pmsnap.sh-204-
##############################################
pcp-5.2.2/src/pmsnap/pmsnap.sh-220-do
pcp-5.2.2/src/pmsnap/pmsnap.sh:221: line=`expr $line + 1`
pcp-5.2.2/src/pmsnap/pmsnap.sh-222- case "$aname"
##############################################
pcp-5.2.2/src/pmsnap/pmsnap.sh-269- #
pcp-5.2.2/src/pmsnap/pmsnap.sh:270: args=`echo $args | sed -e "s/^'//" -e "s/'$//"`
pcp-5.2.2/src/pmsnap/pmsnap.sh-271-
pcp-5.2.2/src/pmsnap/pmsnap.sh:272: name=`_fixpath $dir $aname`
pcp-5.2.2/src/pmsnap/pmsnap.sh-273- if [ -d $PCP_LOG_DIR/pmlogger ]; then
pcp-5.2.2/src/pmsnap/pmsnap.sh:274: folio=`_fixpath $PCP_LOG_DIR/pmlogger $afolio`
pcp-5.2.2/src/pmsnap/pmsnap.sh-275- fi
pcp-5.2.2/src/pmsnap/pmsnap.sh:276: view=`_fixpath $dir $aview`
pcp-5.2.2/src/pmsnap/pmsnap.sh-277-
##############################################
pcp-5.2.2/src/pmsnap/pmsnap.sh-279- #
pcp-5.2.2/src/pmsnap/pmsnap.sh:280: outdir=`dirname $name`
pcp-5.2.2/src/pmsnap/pmsnap.sh-281- if [ ! -d $outdir ]
##############################################
pcp-5.2.2/src/pmsnap/pmsnap.sh-361- else
pcp-5.2.2/src/pmsnap/pmsnap.sh:362: contents=`sed -n -e '/Archive:/s///gp' <$tmp/out`
pcp-5.2.2/src/pmsnap/pmsnap.sh-363- if [ -z "$contents" ]
##############################################
pcp-5.2.2/src/pmsocks/pmsocks.sh-19-
pcp-5.2.2/src/pmsocks/pmsocks.sh:20:PROG=`basename $0`
pcp-5.2.2/src/pmsocks/pmsocks.sh-21-if [ $# -eq 0 -o "X$1" = "X-?" ]
##############################################
pcp-5.2.2/src/pmview/GNUmakefile-48-gram.c gram.h: gram.y
pcp-5.2.2/src/pmview/GNUmakefile:49: $(YACC) -d -o `basename $< .y`.c $<
pcp-5.2.2/src/pmview/GNUmakefile-50-
##############################################
pcp-5.2.2/src/pmview/front-ends/clustervis-30-# maximum req rate (default: 5% of packet rate)
pcp-5.2.2/src/pmview/front-ends/clustervis:31:maxreq=`expr $max / 20`
pcp-5.2.2/src/pmview/front-ends/clustervis-32-
##############################################
pcp-5.2.2/src/pmview/front-ends/clustervis-129- max=$OPTARG
pcp-5.2.2/src/pmview/front-ends/clustervis:130: if [ "X-$max" != "X`expr 0 + -$max 2>/dev/null`" ]
pcp-5.2.2/src/pmview/front-ends/clustervis-131- then
##############################################
pcp-5.2.2/src/pmview/front-ends/clustervis-134- fi
pcp-5.2.2/src/pmview/front-ends/clustervis:135: maxreq=`expr $max / 20`
pcp-5.2.2/src/pmview/front-ends/clustervis-136- ;;
##############################################
pcp-5.2.2/src/pmview/front-ends/clustervis-154- livemode=true
pcp-5.2.2/src/pmview/front-ends/clustervis:155: sourcelist=`sed -e '/^#/d' $nodesfile`
pcp-5.2.2/src/pmview/front-ends/clustervis:156: numsource=`echo $sourcelist | wc -w`
pcp-5.2.2/src/pmview/front-ends/clustervis-157- else
##############################################
pcp-5.2.2/src/pmview/front-ends/clustervis-162-$debug && echo DEBUG sourcelist=\"$sourcelist\"
pcp-5.2.2/src/pmview/front-ends/clustervis:163:hostcols=`echo "sqrt($numsource)" | bc`
pcp-5.2.2/src/pmview/front-ends/clustervis-164-$debug && echo hostcols=$hostcols
##############################################
pcp-5.2.2/src/pmview/front-ends/clustervis-205- else
pcp-5.2.2/src/pmview/front-ends/clustervis:206: host=`pmdumplog -l $source | $PCP_AWK_PROG '/^Performance/ {print $NF}'`
pcp-5.2.2/src/pmview/front-ends/clustervis-207- msource="-a $source"
##############################################
pcp-5.2.2/src/pmview/front-ends/clustervis-209-
pcp-5.2.2/src/pmview/front-ends/clustervis:210: nice=`pmprobe $msource -i kernel.all.cpu.nice | $PCP_AWK_PROG '{print $2; exit}'`
pcp-5.2.2/src/pmview/front-ends/clustervis-211- if [ "$nice" = 1 ]
##############################################
pcp-5.2.2/src/pmview/front-ends/clustervis-226- then
pcp-5.2.2/src/pmview/front-ends/clustervis:227: ncpu=`wc -l <$tmp.pmview_result`
pcp-5.2.2/src/pmview/front-ends/clustervis-228- else
##############################################
pcp-5.2.2/src/pmview/front-ends/clustervis-237- then
pcp-5.2.2/src/pmview/front-ends/clustervis:238: nnet=`grep -v '^lo' $tmp.pmview_result | wc -l`
pcp-5.2.2/src/pmview/front-ends/clustervis-239- else
##############################################
pcp-5.2.2/src/pmview/front-ends/clustervis-242-
pcp-5.2.2/src/pmview/front-ends/clustervis:243: rows=`echo "sqrt($ncpu + $ncpu + $nnet + $nnet)" | bc`
pcp-5.2.2/src/pmview/front-ends/clustervis-244- [ $rows -lt 4 ] && rows=4
##############################################
pcp-5.2.2/src/pmview/front-ends/clustervis-256- _pmview_fetch -I kernel.percpu.cpu.user
pcp-5.2.2/src/pmview/front-ends/clustervis:257: for cpu in `cat $tmp.pmview_result`
pcp-5.2.2/src/pmview/front-ends/clustervis-258- do
pcp-5.2.2/src/pmview/front-ends/clustervis-259- echo " _label $row $col _west \"$cpu\"" >>$tmp.pmview
pcp-5.2.2/src/pmview/front-ends/clustervis:260: echo " _stack `expr $row + 1` $col _hide (" >>$tmp.pmview
pcp-5.2.2/src/pmview/front-ends/clustervis-261- echo " _metrics (" >>$tmp.pmview
##############################################
pcp-5.2.2/src/pmview/front-ends/clustervis-271-
pcp-5.2.2/src/pmview/front-ends/clustervis:272: $debug && echo stack at row=`expr $row + 1` col=$col \"$cpu\"
pcp-5.2.2/src/pmview/front-ends/clustervis-273- $debug && echo label at row=$row col=$col
pcp-5.2.2/src/pmview/front-ends/clustervis-274-
pcp-5.2.2/src/pmview/front-ends/clustervis:275: col=`expr $col + 1`
pcp-5.2.2/src/pmview/front-ends/clustervis-276- if [ $col -ge $rows ]
##############################################
pcp-5.2.2/src/pmview/front-ends/clustervis-278- col=0
pcp-5.2.2/src/pmview/front-ends/clustervis:279: row=`expr $row + 2`
pcp-5.2.2/src/pmview/front-ends/clustervis-280- fi
##############################################
pcp-5.2.2/src/pmview/front-ends/clustervis-284- grep -v '^lo' $tmp.pmview_result >$tmp.net
pcp-5.2.2/src/pmview/front-ends/clustervis:285: for net in `cat $tmp.net`
pcp-5.2.2/src/pmview/front-ends/clustervis-286- do
pcp-5.2.2/src/pmview/front-ends/clustervis-287- echo " _label $row $col _west \"$net\"" >>$tmp.pmview
pcp-5.2.2/src/pmview/front-ends/clustervis:288: echo " _stack `expr $row + 1` $col _hide (" >>$tmp.pmview
pcp-5.2.2/src/pmview/front-ends/clustervis-289- echo " _metrics (" >>$tmp.pmview
##############################################
pcp-5.2.2/src/pmview/front-ends/clustervis-296-
pcp-5.2.2/src/pmview/front-ends/clustervis:297: $debug && echo stack at row=`expr $row + 1` col=$col \"$net\"
pcp-5.2.2/src/pmview/front-ends/clustervis-298- $debug && echo label at row=$row col=$col
pcp-5.2.2/src/pmview/front-ends/clustervis-299-
pcp-5.2.2/src/pmview/front-ends/clustervis:300: col=`expr $col + 1`
pcp-5.2.2/src/pmview/front-ends/clustervis-301- if [ $col -ge $rows ]
##############################################
pcp-5.2.2/src/pmview/front-ends/clustervis-303- col=0
pcp-5.2.2/src/pmview/front-ends/clustervis:304: row=`expr $row + 2`
pcp-5.2.2/src/pmview/front-ends/clustervis-305- fi
##############################################
pcp-5.2.2/src/pmview/front-ends/clustervis-308- echo " )" >>$tmp.pmview
pcp-5.2.2/src/pmview/front-ends/clustervis:309: row=`expr $row + 1`
pcp-5.2.2/src/pmview/front-ends/clustervis-310- echo "# end of host grid" >>$tmp.pmview
##############################################
pcp-5.2.2/src/pmview/front-ends/clustervis-312-
pcp-5.2.2/src/pmview/front-ends/clustervis:313: hostcol=`expr $hostcol + 1`
pcp-5.2.2/src/pmview/front-ends/clustervis-314- if [ $hostcol -ge $hostcols ]
##############################################
pcp-5.2.2/src/pmview/front-ends/clustervis-316- hostcol=0
pcp-5.2.2/src/pmview/front-ends/clustervis:317: hostrow=`expr $hostrow + 1`
pcp-5.2.2/src/pmview/front-ends/clustervis-318- fi
##############################################
pcp-5.2.2/src/pmview/front-ends/dkvis-135- set -- $otherArgs
pcp-5.2.2/src/pmview/front-ends/dkvis:136: shift `expr $OPTIND - 1`
pcp-5.2.2/src/pmview/front-ends/dkvis-137-
##############################################
pcp-5.2.2/src/pmview/front-ends/dkvis-229-
pcp-5.2.2/src/pmview/front-ends/dkvis:230:ndisk=`wc -l <$tmp.disks | sed -e 's/ //g'`
pcp-5.2.2/src/pmview/front-ends/dkvis-231-
##############################################
pcp-5.2.2/src/pmview/front-ends/dkvis-367-
pcp-5.2.2/src/pmview/front-ends/dkvis:368:nctl=`wc -l <$tmp.ctl | sed -e 's/ //g'`
pcp-5.2.2/src/pmview/front-ends/dkvis-369-i=1
##############################################
pcp-5.2.2/src/pmview/front-ends/dkvis-398- | sed -f $tmp.sed-key >$tmp.key
pcp-5.2.2/src/pmview/front-ends/dkvis:399: sort `cat $tmp.sort-arg` $tmp.key \
pcp-5.2.2/src/pmview/front-ends/dkvis-400- | $PCP_AWK_PROG >>$tmp.order '
##############################################
pcp-5.2.2/src/pmview/front-ends/dkvis-418-
pcp-5.2.2/src/pmview/front-ends/dkvis:419: i=`expr $i + 1`
pcp-5.2.2/src/pmview/front-ends/dkvis-420-done
##############################################
pcp-5.2.2/src/pmview/front-ends/dkvis-432-
pcp-5.2.2/src/pmview/front-ends/dkvis:433:nctl=`wc -l <$tmp.order | sed -e 's/ //g'`
pcp-5.2.2/src/pmview/front-ends/dkvis-434-
##############################################
pcp-5.2.2/src/pmview/front-ends/mpvis-147- set -- $otherArgs
pcp-5.2.2/src/pmview/front-ends/mpvis:148: shift `expr $OPTIND - 1`
pcp-5.2.2/src/pmview/front-ends/mpvis-149-
##############################################
pcp-5.2.2/src/pmview/front-ends/mpvis-211- sort $tmp.tmp | uniq > $tmp.pmview_result
pcp-5.2.2/src/pmview/front-ends/mpvis:212: ncpu=`wc -l $tmp.pmview_result | $PCP_AWK_PROG '{print $1}'`
pcp-5.2.2/src/pmview/front-ends/mpvis-213-else
##############################################
pcp-5.2.2/src/pmview/front-ends/mpvis-245- have_idle=true
pcp-5.2.2/src/pmview/front-ends/mpvis:246: [ -z "$scale" ] && scale=`pminfo $namespace $msource -d kernel.percpu.cpu.idle| sed -n '/Semantics:/s/.*Units: //p'`
pcp-5.2.2/src/pmview/front-ends/mpvis-247-fi
##############################################
pcp-5.2.2/src/pmview/front-ends/mpvis-252- have_wait=true
pcp-5.2.2/src/pmview/front-ends/mpvis:253: [ -z "$scale" ] && scale=`pminfo $namespace $msource -d kernel.percpu.cpu.wait.total | sed -n '/Semantics:/s/.*Units: //p'`
pcp-5.2.2/src/pmview/front-ends/mpvis-254-fi
##############################################
pcp-5.2.2/src/pmview/front-ends/mpvis-263- have_wait=$have_intr
pcp-5.2.2/src/pmview/front-ends/mpvis:264: [ -z "$scale" ] && scale=`pminfo $namespace $msource -d kernel.percpu.cpu.intr | sed -n '/Semantics:/s/.*Units: //p'`
pcp-5.2.2/src/pmview/front-ends/mpvis-265-fi
##############################################
pcp-5.2.2/src/pmview/front-ends/mpvis-270- have_nice=true
pcp-5.2.2/src/pmview/front-ends/mpvis:271: [ -z "$scale" ] && scale=`pminfo $namespace $msource -d kernel.percpu.cpu.nice | sed -n '/Semantics:/s/.*Units: //p'`
pcp-5.2.2/src/pmview/front-ends/mpvis-272-fi
##############################################
pcp-5.2.2/src/pmview/front-ends/mpvis-277- have_sys=true
pcp-5.2.2/src/pmview/front-ends/mpvis:278: [ -z "$scale" ] && scale=`pminfo $namespace $msource -d kernel.percpu.cpu.sys | sed -n '/Semantics:/s/.*Units: //p'`
pcp-5.2.2/src/pmview/front-ends/mpvis-279-fi
##############################################
pcp-5.2.2/src/pmview/front-ends/mpvis-284- have_user=true
pcp-5.2.2/src/pmview/front-ends/mpvis:285: [ -z "$scale" ] && scale=`pminfo $namespace $msource -d kernel.percpu.cpu.user | sed -n '/Semantics:/s/.*Units: //p'`
pcp-5.2.2/src/pmview/front-ends/mpvis-286-fi
##############################################
pcp-5.2.2/src/pmview/front-ends/mpvis-322- do
pcp-5.2.2/src/pmview/front-ends/mpvis:323: nrows=`expr $nrows \* 2`
pcp-5.2.2/src/pmview/front-ends/mpvis:324: ncols=`expr $ncpu / $nrows`
pcp-5.2.2/src/pmview/front-ends/mpvis:325: bound=`expr $ncols / 2`
pcp-5.2.2/src/pmview/front-ends/mpvis:326: num=`expr $nrows \* 4`
pcp-5.2.2/src/pmview/front-ends/mpvis-327- done
##############################################
pcp-5.2.2/src/pmview/front-ends/mpvis-335- y = int (x); if (y < x) ++y; print y }'`
pcp-5.2.2/src/pmview/front-ends/mpvis:336: ncols=`expr $ncpu + $nrows - 1`
pcp-5.2.2/src/pmview/front-ends/mpvis:337: ncols=`expr $ncols / $nrows`
pcp-5.2.2/src/pmview/front-ends/mpvis-338- ;;
pcp-5.2.2/src/pmview/front-ends/mpvis-339- k)
pcp-5.2.2/src/pmview/front-ends/mpvis:340: nrows=`expr $ncpu + $maxrowlen - 1`
pcp-5.2.2/src/pmview/front-ends/mpvis:341: nrows=`expr $nrows / $maxrowlen`
pcp-5.2.2/src/pmview/front-ends/mpvis:342: ncols=`expr $ncpu + $nrows - 1`
pcp-5.2.2/src/pmview/front-ends/mpvis:343: ncols=`expr $ncols / $nrows`
pcp-5.2.2/src/pmview/front-ends/mpvis-344- esac
##############################################
pcp-5.2.2/src/pmview/front-ends/mpvis-375- fi
pcp-5.2.2/src/pmview/front-ends/mpvis:376: col=`expr $col + 1`
pcp-5.2.2/src/pmview/front-ends/mpvis-377- if [ "$col" -eq $ncols ]
pcp-5.2.2/src/pmview/front-ends/mpvis-378- then
pcp-5.2.2/src/pmview/front-ends/mpvis:379: echo "# "`cat $tmp.rowlist` >>$tmp.conf
pcp-5.2.2/src/pmview/front-ends/mpvis-380- col=0
##############################################
pcp-5.2.2/src/pmview/front-ends/mpvis-384-
pcp-5.2.2/src/pmview/front-ends/mpvis:385:[ -s $tmp.rowlist ] && echo "# "`cat $tmp.rowlist` >>$tmp.conf
pcp-5.2.2/src/pmview/front-ends/mpvis-386-
##############################################
pcp-5.2.2/src/pmview/front-ends/mpvis-404-#
pcp-5.2.2/src/pmview/front-ends/mpvis:405:y=`expr $nrows \* 2 - 2`
pcp-5.2.2/src/pmview/front-ends/mpvis-406-col=0
##############################################
pcp-5.2.2/src/pmview/front-ends/mpvis-417- fi
pcp-5.2.2/src/pmview/front-ends/mpvis:418: $showinst && labels="$labels \"`echo $cpu | sed -e 's/cpu:*//'`\""
pcp-5.2.2/src/pmview/front-ends/mpvis:419: col=`expr $col + 1`
pcp-5.2.2/src/pmview/front-ends/mpvis-420- echo "$start $cpu $y $rowlist $labels" > $tmp.rowlist
##############################################
pcp-5.2.2/src/pmview/front-ends/mpvis-426- labels=""
pcp-5.2.2/src/pmview/front-ends/mpvis:427: y=`expr $y - 2`
pcp-5.2.2/src/pmview/front-ends/mpvis-428- fi
##############################################
pcp-5.2.2/src/pmview/front-ends/nfsvis-107- set - $otherArgs
pcp-5.2.2/src/pmview/front-ends/nfsvis:108: shift `expr $OPTIND - 1`
pcp-5.2.2/src/pmview/front-ends/nfsvis-109- if [ $# -gt 0 ]
##############################################
pcp-5.2.2/src/pmview/front-ends/osvis-29-# maximum error packets per second
pcp-5.2.2/src/pmview/front-ends/osvis:30:maxerr=`expr $maxpack / 100`
pcp-5.2.2/src/pmview/front-ends/osvis-31-
##############################################
pcp-5.2.2/src/pmview/front-ends/osvis-122- set -- $otherArgs
pcp-5.2.2/src/pmview/front-ends/osvis:123: shift `expr $OPTIND - 1`
pcp-5.2.2/src/pmview/front-ends/osvis-124- if [ $# -gt 0 ]
##############################################
pcp-5.2.2/src/pmview/front-ends/osvis-137-# maximum req error rate (default: 1% of packet rate)
pcp-5.2.2/src/pmview/front-ends/osvis:138:maxerr=`expr $maxpack / 100`
pcp-5.2.2/src/pmview/front-ends/osvis-139-[ "$maxerr" -eq 0 ] && maxerr=1
##############################################
pcp-5.2.2/src/pmview/front-ends/osvis-157-then
pcp-5.2.2/src/pmview/front-ends/osvis:158: ncpu=`cat $tmp.pmview_result`
pcp-5.2.2/src/pmview/front-ends/osvis:159: maxcpu=`expr $maxcpu \* $ncpu`
pcp-5.2.2/src/pmview/front-ends/osvis:160: maxload=`expr $ncpu \* 2`
pcp-5.2.2/src/pmview/front-ends/osvis-161-else
##############################################
pcp-5.2.2/src/pmview/front-ends/osvis-187-then
pcp-5.2.2/src/pmview/front-ends/osvis:188: echo "# Available Network Interfaces: "`cat $tmp.list | tr '\012' ' '` >> $tmp.conf
pcp-5.2.2/src/pmview/front-ends/osvis-189-fi
##############################################
pcp-5.2.2/src/pmview/front-ends/osvis-203-
pcp-5.2.2/src/pmview/front-ends/osvis:204: interfaces_sp=`cat $tmp.chosen | sort | uniq`
pcp-5.2.2/src/pmview/front-ends/osvis:205: interfaces=`echo $interfaces_sp | sed -e 's/ /,/g'`
pcp-5.2.2/src/pmview/front-ends/osvis:206: ninterfaces=`echo $interfaces | wc -w`
pcp-5.2.2/src/pmview/front-ends/osvis-207-
##############################################
pcp-5.2.2/src/pmview/front-ends/osvis-224-then
pcp-5.2.2/src/pmview/front-ends/osvis:225: ndisk=`cat $tmp.pmview_result`
pcp-5.2.2/src/pmview/front-ends/osvis:226: maxdiskscale=`expr $maxdisk \* 10`
pcp-5.2.2/src/pmview/front-ends/osvis-227-else
##############################################
pcp-5.2.2/src/pmview/front-ends/osvis-268-
pcp-5.2.2/src/pmview/front-ends/osvis:269: collen=`expr $ninterfaces + 3`
pcp-5.2.2/src/pmview/front-ends/osvis:270: collensq=`expr $collen \* $collen`
pcp-5.2.2/src/pmview/front-ends/osvis-271-
##############################################
pcp-5.2.2/src/pmview/front-ends/osvis-285- then
pcp-5.2.2/src/pmview/front-ends/osvis:286: echo "# $ctrldesc detected: "`tr < $tmp.ctrls ' ' '\012'` >> $tmp.conf
pcp-5.2.2/src/pmview/front-ends/osvis-287- echo "#" >> $tmp.conf
##############################################
pcp-5.2.2/src/pmview/front-ends/osvis-324-then
pcp-5.2.2/src/pmview/front-ends/osvis:325: realmem=`cat $tmp.pmview_result`
pcp-5.2.2/src/pmview/front-ends/osvis-326-elif _pmview_fetch_values hinv.physmem
pcp-5.2.2/src/pmview/front-ends/osvis-327-then
pcp-5.2.2/src/pmview/front-ends/osvis:328: realmem=`cat $tmp.pmview_result`
pcp-5.2.2/src/pmview/front-ends/osvis:329: realmem=`expr $realmem \* 1024`
pcp-5.2.2/src/pmview/front-ends/osvis-330-else
##############################################
pcp-5.2.2/src/pmview/front-ends/osvis-533- _colorlist memory_colors
pcp-5.2.2/src/pmview/front-ends/osvis:534: _baseLabel "Physical Memory Utilization\nNormalized to `expr $realmem / 1024` Kbytes"
pcp-5.2.2/src/pmview/front-ends/osvis-535- )
##############################################
pcp-5.2.2/src/pmview/front-ends/pmview-args-18-
pcp-5.2.2/src/pmview/front-ends/pmview-args:19:prog=`basename $0`
pcp-5.2.2/src/pmview/front-ends/pmview-args-20-
##############################################
pcp-5.2.2/src/pmview/front-ends/pmview-args-190- fi
pcp-5.2.2/src/pmview/front-ends/pmview-args:191: for _archbase in `echo "$2" | sed -e 's/,/ /g'`
pcp-5.2.2/src/pmview/front-ends/pmview-args-192- do
##############################################
pcp-5.2.2/src/pmview/front-ends/pmview-args-199- then
pcp-5.2.2/src/pmview/front-ends/pmview-args:200: _archbase=`echo $_archbase | sed -e 's/\.[^.]*$//'`
pcp-5.2.2/src/pmview/front-ends/pmview-args-201- fi
##############################################
pcp-5.2.2/src/pmview/front-ends/pmview-args-238- fi
pcp-5.2.2/src/pmview/front-ends/pmview-args:239: numsource=`expr $numsource + 1`
pcp-5.2.2/src/pmview/front-ends/pmview-args-240- done
##############################################
pcp-5.2.2/src/pmview/front-ends/pmview-args-255- fi
pcp-5.2.2/src/pmview/front-ends/pmview-args:256: for _host in `echo "$2" | sed -e 's/,/ /g'`
pcp-5.2.2/src/pmview/front-ends/pmview-args-257- do
##############################################
pcp-5.2.2/src/pmview/front-ends/pmview-args-283- fi
pcp-5.2.2/src/pmview/front-ends/pmview-args:284: numsource=`expr $numsource + 1`
pcp-5.2.2/src/pmview/front-ends/pmview-args-285- done
##############################################
pcp-5.2.2/src/pmview/front-ends/pmview-args-361- DISPLAY)
pcp-5.2.2/src/pmview/front-ends/pmview-args:362: ans=`$CONFIRM -icon $icon -file $2 -useslider -header "$tag $prog" $button 2>&1`
pcp-5.2.2/src/pmview/front-ends/pmview-args-363- ;;
##############################################
pcp-5.2.2/src/pmview/front-ends/pmview-args-378- DISPLAY)
pcp-5.2.2/src/pmview/front-ends/pmview-args:379: ans=`$CONFIRM -icon $icon -t "$*" -noframe -header "$tag $prog" $button 2>&1`
pcp-5.2.2/src/pmview/front-ends/pmview-args-380- ;;
##############################################
pcp-5.2.2/src/pmview/front-ends/pmview-args-490- then
pcp-5.2.2/src/pmview/front-ends/pmview-args:491: number=`wc -l <$tmp.pmview_result | sed -e 's/ //g'`
pcp-5.2.2/src/pmview/front-ends/pmview-args-492- else
##############################################
pcp-5.2.2/src/pmview/front-ends/pmview-args-494- then
pcp-5.2.2/src/pmview/front-ends/pmview-args:495: check=`cut -d ' ' -f 2 $tmp.pmview_fetch`
pcp-5.2.2/src/pmview/front-ends/pmview-args-496- if [ "$check" = "$metric" ]
##############################################
pcp-5.2.2/src/pmview/front-ends/pmview-args-499- #
pcp-5.2.2/src/pmview/front-ends/pmview-args:500: number=`cut -d ' ' -f 2 $tmp.pmview_fetch`
pcp-5.2.2/src/pmview/front-ends/pmview-args-501- else
##############################################
pcp-5.2.2/src/pmview/front-ends/pmview-args-595-{
pcp-5.2.2/src/pmview/front-ends/pmview-args:596: if [ "X-$OPTARG" != "X`expr 0 + -$OPTARG 2>/dev/null`" ]
pcp-5.2.2/src/pmview/front-ends/pmview-args-597- then
##############################################
pcp-5.2.2/src/pmview/front-ends/weblogvis-89- # ...note the creative use of unary - to prevent leading signs
pcp-5.2.2/src/pmview/front-ends/weblogvis:90: if [ "X-$idle" != "X`expr 0 + -$idle 2>/dev/null`" ]
pcp-5.2.2/src/pmview/front-ends/weblogvis-91- then
##############################################
pcp-5.2.2/src/pmview/front-ends/weblogvis-99- # ...note the creative use of unary - to prevent leading signs
pcp-5.2.2/src/pmview/front-ends/weblogvis:100: if [ "X-$max" != "X`expr 0 + -$max 2>/dev/null`" ]
pcp-5.2.2/src/pmview/front-ends/weblogvis-101- then
##############################################
pcp-5.2.2/src/pmview/front-ends/weblogvis-126- set - $otherArgs
pcp-5.2.2/src/pmview/front-ends/weblogvis:127: shift `expr $OPTIND - 1`
pcp-5.2.2/src/pmview/front-ends/weblogvis:128: [ $# -gt 0 ] && serverList_sp=$* && serverList=`echo $* | sed -e 's/ /,/g'`
pcp-5.2.2/src/pmview/front-ends/weblogvis-129-fi
##############################################
pcp-5.2.2/src/pmview/front-ends/weblogvis-147-#
pcp-5.2.2/src/pmview/front-ends/weblogvis:148:maxerr=`expr $max / 20`
pcp-5.2.2/src/pmview/front-ends/weblogvis-149-
##############################################
pcp-5.2.2/src/pmview/front-ends/weblogvis-213-
pcp-5.2.2/src/pmview/front-ends/weblogvis:214:servers_sp=`cat $tmp.chosen | sort | uniq`
pcp-5.2.2/src/pmview/front-ends/weblogvis:215:servers=`echo $servers_sp | sed -e 's/ /,/g'`
pcp-5.2.2/src/pmview/front-ends/weblogvis:216:nservers=`echo $servers | wc -w`
pcp-5.2.2/src/pmview/front-ends/weblogvis-217-
##############################################
pcp-5.2.2/src/pmview/front-ends/weblogvis-222- echo "Error: $prog: no matching web servers"
pcp-5.2.2/src/pmview/front-ends/weblogvis:223: echo " Available web servers are: " `cat $tmp.list`
pcp-5.2.2/src/pmview/front-ends/weblogvis-224- exit 1
##############################################
pcp-5.2.2/src/pmview/front-ends/weblogvis.load-32-webping -c $tmp.$i -I0 -q &
pcp-5.2.2/src/pmview/front-ends/weblogvis.load:33:i=`expr $i + 1`
pcp-5.2.2/src/pmview/front-ends/weblogvis.load-34-
##############################################
pcp-5.2.2/src/pmview/front-ends/weblogvis.load-38-webping -c $tmp.$i -I0 -q &
pcp-5.2.2/src/pmview/front-ends/weblogvis.load:39:i=`expr $i + 1`
pcp-5.2.2/src/pmview/front-ends/weblogvis.load-40-
##############################################
pcp-5.2.2/src/pmview/front-ends/weblogvis.load-46-webping -c $tmp.$i -I0 -q &
pcp-5.2.2/src/pmview/front-ends/weblogvis.load:47:i=`expr $i + 1`
pcp-5.2.2/src/pmview/front-ends/weblogvis.load-48-
##############################################
pcp-5.2.2/src/pmview/front-ends/weblogvis.load-53-webping -c $tmp.$i -I0 -q &
pcp-5.2.2/src/pmview/front-ends/weblogvis.load:54:i=`expr $i + 1`
pcp-5.2.2/src/pmview/front-ends/weblogvis.load-55-
##############################################
pcp-5.2.2/src/pmview/front-ends/weblogvis.load-59-webping -c $tmp.$i -I0 -q &
pcp-5.2.2/src/pmview/front-ends/weblogvis.load:60:i=`expr $i + 1`
pcp-5.2.2/src/pmview/front-ends/weblogvis.load-61-
##############################################
pcp-5.2.2/src/pmview/front-ends/weblogvis.load-67-webping -c $tmp.$i -I0 -q -P specular:8080 &
pcp-5.2.2/src/pmview/front-ends/weblogvis.load:68:i=`expr $i + 1`
pcp-5.2.2/src/pmview/front-ends/weblogvis.load-69-
##############################################
pcp-5.2.2/src/pmview/front-ends/weblogvis.load-75-webping -c $tmp.$i -I0 -q -P specular:8080 &
pcp-5.2.2/src/pmview/front-ends/weblogvis.load:76:i=`expr $i + 1`
pcp-5.2.2/src/pmview/front-ends/weblogvis.load-77-
##############################################
pcp-5.2.2/src/pmview/front-ends/weblogvis.load-84-webping -c $tmp.$i -I0 -q -S specular:8080 &
pcp-5.2.2/src/pmview/front-ends/weblogvis.load:85:i=`expr $i + 1`
pcp-5.2.2/src/pmview/front-ends/weblogvis.load-86-
##############################################
pcp-5.2.2/src/pmview/front-ends/weblogvis.load-92-webping -c $tmp.$i -I0 -q -S specular:8080 &
pcp-5.2.2/src/pmview/front-ends/weblogvis.load:93:i=`expr $i + 1`
pcp-5.2.2/src/pmview/front-ends/weblogvis.load-94-
##############################################
pcp-5.2.2/src/pmview/front-ends/weblogvis.load-100-webping -c $tmp.$i -I0 -q &
pcp-5.2.2/src/pmview/front-ends/weblogvis.load:101:i=`expr $i + 1`
pcp-5.2.2/src/pmview/front-ends/weblogvis.load-102-
##############################################
pcp-5.2.2/src/pmview/front-ends/webpingvis-155- # ...note the creative use of unary - to prevent leading signs
pcp-5.2.2/src/pmview/front-ends/webpingvis:156: if [ "X-$max" != "X`expr 0 + -$max 2>/dev/null`" ]
pcp-5.2.2/src/pmview/front-ends/webpingvis-157- then
##############################################
pcp-5.2.2/src/pmview/front-ends/webpingvis-217- _sort_arch_indom $tmp.int
pcp-5.2.2/src/pmview/front-ends/webpingvis:218: host=`pmdumplog -l $arch | $PCP_AWK_PROG '/^Performance/ {print $5}' | sed -e 's/,//g'`
pcp-5.2.2/src/pmview/front-ends/webpingvis-219- [ "X$host" = X ] && host="unknown host"
##############################################
pcp-5.2.2/src/pmview/front-ends/webpingvis-226-
pcp-5.2.2/src/pmview/front-ends/webpingvis:227:urlcount=`wc -l <$tmp.int | sed -e 's/ *//g'`
pcp-5.2.2/src/pmview/front-ends/webpingvis:228:bytesmax=`tail -1 $tmp.int | $PCP_AWK_PROG '{print $2}'`
pcp-5.2.2/src/pmview/front-ends/webpingvis-229-
##############################################
pcp-5.2.2/src/pmview/front-ends/webpingvis-346-then
pcp-5.2.2/src/pmview/front-ends/webpingvis:347: totoff=`expr $urlcount + 1`
pcp-5.2.2/src/pmview/front-ends/webpingvis-348- cat <<end-of-file >> $tmp.pmview
##############################################
pcp-5.2.2/src/pmview/front-ends/webvis-28-# maximum req rate (default: 5% of packet rate)
pcp-5.2.2/src/pmview/front-ends/webvis:29:maxreq=`expr $max / 20`
pcp-5.2.2/src/pmview/front-ends/webvis-30-
##############################################
pcp-5.2.2/src/pmview/front-ends/webvis-99- maxbusy=$OPTARG
pcp-5.2.2/src/pmview/front-ends/webvis:100: if [ "X-$maxbusy" != "X`expr 0 + -$maxbusy 2>/dev/null`" ]
pcp-5.2.2/src/pmview/front-ends/webvis-101- then
##############################################
pcp-5.2.2/src/pmview/front-ends/webvis-108- maxio=$OPTARG
pcp-5.2.2/src/pmview/front-ends/webvis:109: if [ "X-$maxio" != "X`expr 0 + -$maxio 2>/dev/null`" ]
pcp-5.2.2/src/pmview/front-ends/webvis-110- then
##############################################
pcp-5.2.2/src/pmview/front-ends/webvis-117- max=$OPTARG
pcp-5.2.2/src/pmview/front-ends/webvis:118: if [ "X-$max" != "X`expr 0 + -$max 2>/dev/null`" ]
pcp-5.2.2/src/pmview/front-ends/webvis-119- then
##############################################
pcp-5.2.2/src/pmview/front-ends/webvis-122- fi
pcp-5.2.2/src/pmview/front-ends/webvis:123: maxreq=`expr $max / 20`
pcp-5.2.2/src/pmview/front-ends/webvis-124- ;;
##############################################
pcp-5.2.2/src/pmview/front-ends/webvis-127- maxreq=$OPTARG
pcp-5.2.2/src/pmview/front-ends/webvis:128: if [ "X-$maxreq" != "X`expr 0 + -$maxreq 2>/dev/null`" ]
pcp-5.2.2/src/pmview/front-ends/webvis-129- then
##############################################
pcp-5.2.2/src/pmview/front-ends/webvis-157- set - $otherArgs
pcp-5.2.2/src/pmview/front-ends/webvis:158: shift `expr $OPTIND - 1`
pcp-5.2.2/src/pmview/front-ends/webvis-159- [ $# -gt 0 ] && argInterfaces="$*"
##############################################
pcp-5.2.2/src/pmview/front-ends/webvis-162-# maximum average active for disks, percent -> msec/sec
pcp-5.2.2/src/pmview/front-ends/webvis:163:maxactive=`expr $maxbusy \* 1000 / 100`
pcp-5.2.2/src/pmview/front-ends/webvis-164-
##############################################
pcp-5.2.2/src/pmview/front-ends/webvis-166-# maximum req error rate (default: 20% of packet rate)
pcp-5.2.2/src/pmview/front-ends/webvis:167:maxerr=`expr $maxreq / 5`
pcp-5.2.2/src/pmview/front-ends/webvis-168-[ "$maxerr" -eq 0 ] && maxerr=1
##############################################
pcp-5.2.2/src/pmview/front-ends/webvis-185-then
pcp-5.2.2/src/pmview/front-ends/webvis:186: host=`pmdumplog -l $arch | $PCP_AWK_PROG '/^Performance/ {print $5}' | sed -e 's/,//g'`
pcp-5.2.2/src/pmview/front-ends/webvis-187- [ "X$host" = X ] && host="unknown host"
##############################################
pcp-5.2.2/src/pmview/front-ends/webvis-220-then
pcp-5.2.2/src/pmview/front-ends/webvis:221: echo "# Available Network Interfaces: " `cat $tmp.list` >> $tmp.pmview
pcp-5.2.2/src/pmview/front-ends/webvis-222-fi
##############################################
pcp-5.2.2/src/pmview/front-ends/webvis-234-
pcp-5.2.2/src/pmview/front-ends/webvis:235:interfaces_sp=`cat $tmp.chosen | sort | uniq`
pcp-5.2.2/src/pmview/front-ends/webvis-236-loflag=false
##############################################
pcp-5.2.2/src/pmview/front-ends/webvis-246-$loflag && interfaces="$interfaces lo0"
pcp-5.2.2/src/pmview/front-ends/webvis:247:ninterfaces=`echo $interfaces | wc -w`
pcp-5.2.2/src/pmview/front-ends/webvis-248-
##############################################
pcp-5.2.2/src/pmview/front-ends/webvis-256- echo "$prog: no matching network interfaces"
pcp-5.2.2/src/pmview/front-ends/webvis:257: echo "Available interfaces on host \"$host\" are: " `cat $tmp.list`
pcp-5.2.2/src/pmview/front-ends/webvis-258- echo ""
##############################################
pcp-5.2.2/src/pmview/front-ends/webvis-262-
pcp-5.2.2/src/pmview/front-ends/webvis:263:net_grid1=`expr $ninterfaces + 2`
pcp-5.2.2/src/pmview/front-ends/webvis-264-
##############################################
pcp-5.2.2/src/pmview/front-ends/webvis-281-
pcp-5.2.2/src/pmview/front-ends/webvis:282:maxcpu=`expr $maxcpu \* $numcpu`
pcp-5.2.2/src/pmview/front-ends/webvis-283-
##############################################
pcp-5.2.2/src/pmview/front-ends/webvis-300-then
pcp-5.2.2/src/pmview/front-ends/webvis:301: realmem=`pminfo -f $msource $namespace hinv.physmem | $PCP_AWK_PROG '/value/ { print $2 }'`
pcp-5.2.2/src/pmview/front-ends/webvis-302- if [ -z "$realmem" ]
##############################################
pcp-5.2.2/src/pmview/front-ends/webvis-305- else
pcp-5.2.2/src/pmview/front-ends/webvis:306: realmem=`expr $realmem \* 1024`
pcp-5.2.2/src/pmview/front-ends/webvis-307- fi
##############################################
pcp-5.2.2/src/pmview/front-ends/webvis-354-
pcp-5.2.2/src/pmview/front-ends/webvis:355:basestr_mem="Physical Memory Utilization\nNormalized to `pminfo -f $msource mem.physmem | grep value | sed -e 's/ *value //'` Kbytes"
pcp-5.2.2/src/pmview/front-ends/webvis-356-
##############################################
pcp-5.2.2/src/pmview/front-ends/webvis-580-end-of-file
pcp-5.2.2/src/pmview/front-ends/webvis:581: xcoord=`expr $xcoord + 1`
pcp-5.2.2/src/pmview/front-ends/webvis-582- fi
##############################################
pcp-5.2.2/src/pmview/front-ends/webvis-604-end-of-file
pcp-5.2.2/src/pmview/front-ends/webvis:605: xcoord=`expr $xcoord + 1`
pcp-5.2.2/src/pmview/front-ends/webvis-606- fi
##############################################
pcp-5.2.2/src/pmview/front-ends/webvis-669-end-of-file
pcp-5.2.2/src/pmview/front-ends/webvis:670: xcoord=`expr $xcoord + 1`
pcp-5.2.2/src/pmview/front-ends/webvis-671- done
##############################################
pcp-5.2.2/src/pmview/front-ends/webvis-691-end-of-file
pcp-5.2.2/src/pmview/front-ends/webvis:692: xcoord=`expr $xcoord + 1`
pcp-5.2.2/src/pmview/front-ends/webvis-693- done
##############################################
pcp-5.2.2/src/selinux/next-xxx-yyy-21- fi
pcp-5.2.2/src/selinux/next-xxx-yyy:22: last=`expr $last + 1`
pcp-5.2.2/src/selinux/next-xxx-yyy-23- echo "$tag.$last"
##############################################
pcp-5.2.2/src/selinux/selinux-setup.sh-19-trap "exit 0" 0 1 2 3 15
pcp-5.2.2/src/selinux/selinux-setup.sh:20:prog=`basename $0`
pcp-5.2.2/src/selinux/selinux-setup.sh-21-
##############################################
pcp-5.2.2/src/sheet2pcp/sheet2pcp-220- for (my $i = 0; $i < 6; $i++) {
pcp-5.2.2/src/sheet2pcp/sheet2pcp:221: $_ = eval($args[$i]);
pcp-5.2.2/src/sheet2pcp/sheet2pcp-222- if (!defined($_)) {
##############################################
pcp-5.2.2/src/sheet2pcp/sheet2pcp-237- my $value = $token->attr->{type};
pcp-5.2.2/src/sheet2pcp/sheet2pcp:238: $_ = eval($value);
pcp-5.2.2/src/sheet2pcp/sheet2pcp-239- if (!defined($_)) {
##############################################
pcp-5.2.2/src/sheet2pcp/sheet2pcp-248- my $value = $token->attr->{sem};
pcp-5.2.2/src/sheet2pcp/sheet2pcp:249: $_ = eval($value);
pcp-5.2.2/src/sheet2pcp/sheet2pcp-250- if (!defined($_)) {
##############################################
pcp-5.2.2/src/telnet-probe/telnet-probe.c-78- enumIx = NULL;
pcp-5.2.2/src/telnet-probe/telnet-probe.c:79: for (myAddr = __pmHostEntGetSockAddr(servInfo, &enumIx);
pcp-5.2.2/src/telnet-probe/telnet-probe.c-80- myAddr != NULL;
pcp-5.2.2/src/telnet-probe/telnet-probe.c:81: myAddr = __pmHostEntGetSockAddr(servInfo, &enumIx)) {
pcp-5.2.2/src/telnet-probe/telnet-probe.c-82- /* Create a socket */