===========================================================
.___ __ __
_________________ __ __ __| _/|__|/ |_
/ ___\_` __ \__ \ | | \/ __ | | \\_ __\
/ /_/ > | \// __ \| | / /_/ | | || |
\___ /|__| (____ /____/\____ | |__||__|
/_____/ \/ \/
grep rough audit - static analysis tool
v2.8 written by @Wireghoul
=================================[justanotherhacker.com]===
r-cran-polyclip-1.10-0/configure.ac-2-dnl Determine version of R
r-cran-polyclip-1.10-0/configure.ac:3:CXX11FUN=`"${R_HOME}/bin/Rscript" -e 'if(getRversion() < "3.4") cat("CXX1X", fill=TRUE) else cat("CXX11", fill=TRUE)'`
r-cran-polyclip-1.10-0/configure.ac-4-dnl Check for presence of C++11
r-cran-polyclip-1.10-0/configure.ac:5:CXX1X=`"${R_HOME}/bin/R" CMD config "${CXX11FUN}"`
r-cran-polyclip-1.10-0/configure.ac-6-if test "${CXX1X}" != ""; then
r-cran-polyclip-1.10-0/configure.ac-7- echo "compiling under C++11"
r-cran-polyclip-1.10-0/configure.ac:8: CXX1XSTD=`"${R_HOME}/bin/R" CMD config "${CXX11FUN}STD"`
r-cran-polyclip-1.10-0/configure.ac-9- CXX="${CXX1X} ${CXX1XSTD}"
r-cran-polyclip-1.10-0/configure.ac-10- POLYCLIP_CXX_DECLAR="CXX_STD = CXX11"
r-cran-polyclip-1.10-0/configure.ac:11: CXXFLAGS=`"${R_HOME}/bin/R" CMD config "${CXX11FUN}FLAGS"`
r-cran-polyclip-1.10-0/configure.ac-12-else
r-cran-polyclip-1.10-0/configure.ac-13- echo "C++11 is not supported; compiling under vanilla C++"
r-cran-polyclip-1.10-0/configure.ac:14: CXX=`"${R_HOME}/bin/R" CMD config CXX`
r-cran-polyclip-1.10-0/configure.ac-15- POLYCLIP_CXX_DECLAR=""
r-cran-polyclip-1.10-0/configure.ac:16: CXXFLAGS=`"${R_HOME}/bin/R" CMD config CXXFLAGS`
r-cran-polyclip-1.10-0/configure.ac-17-fi
r-cran-polyclip-1.10-0/configure.ac:18:CPPFLAGS=`"${R_HOME}/bin/R" CMD config CPPFLAGS`
r-cran-polyclip-1.10-0/configure.ac-19-AC_PROG_CXX
##############################################
r-cran-polyclip-1.10-0/configure.ac-34- echo Compiling against system copy of polyclipping library.
r-cran-polyclip-1.10-0/configure.ac:35: POLYCLIP_LIBS=`$PKG_CONFIG --libs polyclipping`
r-cran-polyclip-1.10-0/configure.ac:36: POLYCLIP_CPPFLAGS=`$PKG_CONFIG --cflags polyclipping`
r-cran-polyclip-1.10-0/configure.ac-37- dnl The polyclip type declarations are needed to compile the R interface
##############################################
r-cran-polyclip-1.10-0/configure-43-if test -z "$BASH_VERSION$ZSH_VERSION" \
r-cran-polyclip-1.10-0/configure:44: && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
r-cran-polyclip-1.10-0/configure-45- as_echo='print -r --'
r-cran-polyclip-1.10-0/configure-46- as_echo_n='print -rn --'
r-cran-polyclip-1.10-0/configure:47:elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
r-cran-polyclip-1.10-0/configure-48- as_echo='printf %s\n'
##############################################
r-cran-polyclip-1.10-0/configure-50-else
r-cran-polyclip-1.10-0/configure:51: if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
r-cran-polyclip-1.10-0/configure-52- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
##############################################
r-cran-polyclip-1.10-0/configure-60- expr "X$arg" : "X\\(.*\\)$as_nl";
r-cran-polyclip-1.10-0/configure:61: arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
r-cran-polyclip-1.10-0/configure-62- esac;
##############################################
r-cran-polyclip-1.10-0/configure-197- eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
r-cran-polyclip-1.10-0/configure:198: test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
r-cran-polyclip-1.10-0/configure-199-test \$(( 1 + 1 )) = 2 || exit 1"
##############################################
r-cran-polyclip-1.10-0/configure-324- case $as_dir in #(
r-cran-polyclip-1.10-0/configure:325: *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
r-cran-polyclip-1.10-0/configure-326- *) as_qdir=$as_dir;;
##############################################
r-cran-polyclip-1.10-0/configure-397- {
r-cran-polyclip-1.10-0/configure:398: as_val=`expr "$@" || test $? -eq 1`
r-cran-polyclip-1.10-0/configure-399- }
##############################################
r-cran-polyclip-1.10-0/configure-404-# ----------------------------------------
r-cran-polyclip-1.10-0/configure:405:# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
r-cran-polyclip-1.10-0/configure-406-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
##############################################
r-cran-polyclip-1.10-0/configure-467- eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
r-cran-polyclip-1.10-0/configure:468: test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
r-cran-polyclip-1.10-0/configure-469- # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
##############################################
r-cran-polyclip-1.10-0/configure-751- case $ac_option in
r-cran-polyclip-1.10-0/configure:752: *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
r-cran-polyclip-1.10-0/configure-753- *=) ac_optarg= ;;
##############################################
r-cran-polyclip-1.10-0/configure-795- -disable-* | --disable-*)
r-cran-polyclip-1.10-0/configure:796: ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
r-cran-polyclip-1.10-0/configure-797- # Reject names that are not valid shell variable names.
##############################################
r-cran-polyclip-1.10-0/configure-800- ac_useropt_orig=$ac_useropt
r-cran-polyclip-1.10-0/configure:801: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
r-cran-polyclip-1.10-0/configure-802- case $ac_user_opts in
##############################################
r-cran-polyclip-1.10-0/configure-821- -enable-* | --enable-*)
r-cran-polyclip-1.10-0/configure:822: ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
r-cran-polyclip-1.10-0/configure-823- # Reject names that are not valid shell variable names.
##############################################
r-cran-polyclip-1.10-0/configure-826- ac_useropt_orig=$ac_useropt
r-cran-polyclip-1.10-0/configure:827: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
r-cran-polyclip-1.10-0/configure-828- case $ac_user_opts in
##############################################
r-cran-polyclip-1.10-0/configure-1025- -with-* | --with-*)
r-cran-polyclip-1.10-0/configure:1026: ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
r-cran-polyclip-1.10-0/configure-1027- # Reject names that are not valid shell variable names.
##############################################
r-cran-polyclip-1.10-0/configure-1030- ac_useropt_orig=$ac_useropt
r-cran-polyclip-1.10-0/configure:1031: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
r-cran-polyclip-1.10-0/configure-1032- case $ac_user_opts in
##############################################
r-cran-polyclip-1.10-0/configure-1041- -without-* | --without-*)
r-cran-polyclip-1.10-0/configure:1042: ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
r-cran-polyclip-1.10-0/configure-1043- # Reject names that are not valid shell variable names.
##############################################
r-cran-polyclip-1.10-0/configure-1046- ac_useropt_orig=$ac_useropt
r-cran-polyclip-1.10-0/configure:1047: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
r-cran-polyclip-1.10-0/configure-1048- case $ac_user_opts in
##############################################
r-cran-polyclip-1.10-0/configure-1079- *=*)
r-cran-polyclip-1.10-0/configure:1080: ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
r-cran-polyclip-1.10-0/configure-1081- # Reject names that are not valid shell variable names.
##############################################
r-cran-polyclip-1.10-0/configure-1100-if test -n "$ac_prev"; then
r-cran-polyclip-1.10-0/configure:1101: ac_option=--`echo $ac_prev | sed 's/_/-/g'`
r-cran-polyclip-1.10-0/configure-1102- as_fn_error $? "missing argument to $ac_option"
##############################################
r-cran-polyclip-1.10-0/configure-1122- */ )
r-cran-polyclip-1.10-0/configure:1123: ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
r-cran-polyclip-1.10-0/configure-1124- eval $ac_var=\$ac_val;;
##############################################
r-cran-polyclip-1.10-0/configure-1157-ac_ls_di=`ls -di .` &&
r-cran-polyclip-1.10-0/configure:1158:ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
r-cran-polyclip-1.10-0/configure-1159- as_fn_error $? "working directory cannot be determined"
##############################################
r-cran-polyclip-1.10-0/configure-1213-case $srcdir in
r-cran-polyclip-1.10-0/configure:1214:*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
r-cran-polyclip-1.10-0/configure-1215-esac
##############################################
r-cran-polyclip-1.10-0/configure-1256-By default, \`make install' will install all the files in
r-cran-polyclip-1.10-0/configure:1257:\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
r-cran-polyclip-1.10-0/configure:1258:an installation prefix other than \`$ac_default_prefix' using \`--prefix',
r-cran-polyclip-1.10-0/configure-1259-for instance \`--prefix=\$HOME'.
##############################################
r-cran-polyclip-1.10-0/configure-1323-*)
r-cran-polyclip-1.10-0/configure:1324: ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
r-cran-polyclip-1.10-0/configure-1325- # A ".." for each directory in $ac_dir_suffix.
r-cran-polyclip-1.10-0/configure:1326: ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
r-cran-polyclip-1.10-0/configure-1327- case $ac_top_builddir_sub in
##############################################
r-cran-polyclip-1.10-0/configure-1661- *\'*)
r-cran-polyclip-1.10-0/configure:1662: ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
r-cran-polyclip-1.10-0/configure-1663- esac
##############################################
r-cran-polyclip-1.10-0/configure-1744- case $ac_val in
r-cran-polyclip-1.10-0/configure:1745: *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
r-cran-polyclip-1.10-0/configure-1746- esac
##############################################
r-cran-polyclip-1.10-0/configure-1759- case $ac_val in
r-cran-polyclip-1.10-0/configure:1760: *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
r-cran-polyclip-1.10-0/configure-1761- esac
##############################################
r-cran-polyclip-1.10-0/configure-1879- set,)
r-cran-polyclip-1.10-0/configure:1880: { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
r-cran-polyclip-1.10-0/configure:1881:$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
r-cran-polyclip-1.10-0/configure-1882- ac_cache_corrupted=: ;;
##############################################
r-cran-polyclip-1.10-0/configure-1890- # differences in whitespace do not lead to failure.
r-cran-polyclip-1.10-0/configure:1891: ac_old_val_w=`echo x $ac_old_val`
r-cran-polyclip-1.10-0/configure:1892: ac_new_val_w=`echo x $ac_new_val`
r-cran-polyclip-1.10-0/configure-1893- if test "$ac_old_val_w" != "$ac_new_val_w"; then
##############################################
r-cran-polyclip-1.10-0/configure-1910- case $ac_new_val in
r-cran-polyclip-1.10-0/configure:1911: *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
r-cran-polyclip-1.10-0/configure-1912- *) ac_arg=$ac_var=$ac_new_val ;;
##############################################
r-cran-polyclip-1.10-0/configure-1937-
r-cran-polyclip-1.10-0/configure:1938:CXX11FUN=`"${R_HOME}/bin/Rscript" -e 'if(getRversion() < "3.4") cat("CXX1X", fill=TRUE) else cat("CXX11", fill=TRUE)'`
r-cran-polyclip-1.10-0/configure:1939:CXX1X=`"${R_HOME}/bin/R" CMD config "${CXX11FUN}"`
r-cran-polyclip-1.10-0/configure-1940-if test "${CXX1X}" != ""; then
r-cran-polyclip-1.10-0/configure-1941- echo "compiling under C++11"
r-cran-polyclip-1.10-0/configure:1942: CXX1XSTD=`"${R_HOME}/bin/R" CMD config "${CXX11FUN}STD"`
r-cran-polyclip-1.10-0/configure-1943- CXX="${CXX1X} ${CXX1XSTD}"
r-cran-polyclip-1.10-0/configure-1944- POLYCLIP_CXX_DECLAR="CXX_STD = CXX11"
r-cran-polyclip-1.10-0/configure:1945: CXXFLAGS=`"${R_HOME}/bin/R" CMD config "${CXX11FUN}FLAGS"`
r-cran-polyclip-1.10-0/configure-1946-else
r-cran-polyclip-1.10-0/configure-1947- echo "C++11 is not supported; compiling under vanilla C++"
r-cran-polyclip-1.10-0/configure:1948: CXX=`"${R_HOME}/bin/R" CMD config CXX`
r-cran-polyclip-1.10-0/configure-1949- POLYCLIP_CXX_DECLAR=""
r-cran-polyclip-1.10-0/configure:1950: CXXFLAGS=`"${R_HOME}/bin/R" CMD config CXXFLAGS`
r-cran-polyclip-1.10-0/configure-1951-fi
r-cran-polyclip-1.10-0/configure:1952:CPPFLAGS=`"${R_HOME}/bin/R" CMD config CPPFLAGS`
r-cran-polyclip-1.10-0/configure-1953-ac_ext=cpp
##############################################
r-cran-polyclip-1.10-0/configure-2106-$as_echo_n "checking whether the C++ compiler works... " >&6; }
r-cran-polyclip-1.10-0/configure:2107:ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
r-cran-polyclip-1.10-0/configure-2108-
##############################################
r-cran-polyclip-1.10-0/configure-2150- then :; else
r-cran-polyclip-1.10-0/configure:2151: ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
r-cran-polyclip-1.10-0/configure-2152- fi
##############################################
r-cran-polyclip-1.10-0/configure-2210- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
r-cran-polyclip-1.10-0/configure:2211: *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
r-cran-polyclip-1.10-0/configure-2212- break;;
##############################################
r-cran-polyclip-1.10-0/configure-2319- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
r-cran-polyclip-1.10-0/configure:2320: *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
r-cran-polyclip-1.10-0/configure-2321- break;;
##############################################
r-cran-polyclip-1.10-0/configure-2477- echo Compiling against system copy of polyclipping library.
r-cran-polyclip-1.10-0/configure:2478: POLYCLIP_LIBS=`$PKG_CONFIG --libs polyclipping`
r-cran-polyclip-1.10-0/configure:2479: POLYCLIP_CPPFLAGS=`$PKG_CONFIG --cflags polyclipping`
r-cran-polyclip-1.10-0/configure-2480- LLTYPES="-DPOLYCLIP_LONG64=\"signed long long\" -DPOLYCLIP_ULONG64=\"unsigned long long\""
##############################################
r-cran-polyclip-1.10-0/configure-2685- # Check for GNU $ac_path_GREP
r-cran-polyclip-1.10-0/configure:2686:case `"$ac_path_GREP" --version 2>&1` in
r-cran-polyclip-1.10-0/configure-2687-*GNU*)
##############################################
r-cran-polyclip-1.10-0/configure-2751- # Check for GNU $ac_path_EGREP
r-cran-polyclip-1.10-0/configure:2752:case `"$ac_path_EGREP" --version 2>&1` in
r-cran-polyclip-1.10-0/configure-2753-*GNU*)
##############################################
r-cran-polyclip-1.10-0/configure-2912-do :
r-cran-polyclip-1.10-0/configure:2913: as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
r-cran-polyclip-1.10-0/configure-2914-ac_fn_cxx_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
##############################################
r-cran-polyclip-1.10-0/configure-2917- cat >>confdefs.h <<_ACEOF
r-cran-polyclip-1.10-0/configure:2918:#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
r-cran-polyclip-1.10-0/configure-2919-_ACEOF
##############################################
r-cran-polyclip-1.10-0/configure-3153-'
r-cran-polyclip-1.10-0/configure:3154:DEFS=`sed -n "$ac_script" confdefs.h`
r-cran-polyclip-1.10-0/configure-3155-
##############################################
r-cran-polyclip-1.10-0/configure-3162- ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
r-cran-polyclip-1.10-0/configure:3163: ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
r-cran-polyclip-1.10-0/configure-3164- # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
##############################################
r-cran-polyclip-1.10-0/configure-3229-if test -z "$BASH_VERSION$ZSH_VERSION" \
r-cran-polyclip-1.10-0/configure:3230: && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
r-cran-polyclip-1.10-0/configure-3231- as_echo='print -r --'
r-cran-polyclip-1.10-0/configure-3232- as_echo_n='print -rn --'
r-cran-polyclip-1.10-0/configure:3233:elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
r-cran-polyclip-1.10-0/configure-3234- as_echo='printf %s\n'
##############################################
r-cran-polyclip-1.10-0/configure-3236-else
r-cran-polyclip-1.10-0/configure:3237: if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
r-cran-polyclip-1.10-0/configure-3238- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
##############################################
r-cran-polyclip-1.10-0/configure-3246- expr "X$arg" : "X\\(.*\\)$as_nl";
r-cran-polyclip-1.10-0/configure:3247: arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
r-cran-polyclip-1.10-0/configure-3248- esac;
##############################################
r-cran-polyclip-1.10-0/configure-3323-# ----------------------------------------
r-cran-polyclip-1.10-0/configure:3324:# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
r-cran-polyclip-1.10-0/configure-3325-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
##############################################
r-cran-polyclip-1.10-0/configure-3395- {
r-cran-polyclip-1.10-0/configure:3396: as_val=`expr "$@" || test $? -eq 1`
r-cran-polyclip-1.10-0/configure-3397- }
##############################################
r-cran-polyclip-1.10-0/configure-3499- case $as_dir in #(
r-cran-polyclip-1.10-0/configure:3500: *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
r-cran-polyclip-1.10-0/configure-3501- *) as_qdir=$as_dir;;
##############################################
r-cran-polyclip-1.10-0/configure-3621-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
r-cran-polyclip-1.10-0/configure:3622:ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
r-cran-polyclip-1.10-0/configure-3623-ac_cs_version="\\
##############################################
r-cran-polyclip-1.10-0/configure-3643- --*=?*)
r-cran-polyclip-1.10-0/configure:3644: ac_option=`expr "X$1" : 'X\([^=]*\)='`
r-cran-polyclip-1.10-0/configure:3645: ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
r-cran-polyclip-1.10-0/configure-3646- ac_shift=:
##############################################
r-cran-polyclip-1.10-0/configure-3648- --*=)
r-cran-polyclip-1.10-0/configure:3649: ac_option=`expr "X$1" : 'X\([^=]*\)='`
r-cran-polyclip-1.10-0/configure-3650- ac_optarg=
##############################################
r-cran-polyclip-1.10-0/configure-3672- case $ac_optarg in
r-cran-polyclip-1.10-0/configure:3673: *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
r-cran-polyclip-1.10-0/configure-3674- '') as_fn_error $? "missing file argument" ;;
##############################################
r-cran-polyclip-1.10-0/configure-3788-fi
r-cran-polyclip-1.10-0/configure:3789:ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
r-cran-polyclip-1.10-0/configure-3790-if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
##############################################
r-cran-polyclip-1.10-0/configure-3805- as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
r-cran-polyclip-1.10-0/configure:3806:ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
r-cran-polyclip-1.10-0/configure-3807-ac_delim='%!_!# '
##############################################
r-cran-polyclip-1.10-0/configure-3811-
r-cran-polyclip-1.10-0/configure:3812: ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
r-cran-polyclip-1.10-0/configure-3813- if test $ac_delim_n = $ac_delim_num; then
##############################################
r-cran-polyclip-1.10-0/configure-3973- esac
r-cran-polyclip-1.10-0/configure:3974: case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
r-cran-polyclip-1.10-0/configure-3975- as_fn_append ac_file_inputs " '$ac_f'"
##############################################
r-cran-polyclip-1.10-0/configure-4032-*)
r-cran-polyclip-1.10-0/configure:4033: ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
r-cran-polyclip-1.10-0/configure-4034- # A ".." for each directory in $ac_dir_suffix.
r-cran-polyclip-1.10-0/configure:4035: ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
r-cran-polyclip-1.10-0/configure-4036- case $ac_top_builddir_sub in
##############################################
r-cran-polyclip-1.10-0/configure-4084-/@mandir@/p'
r-cran-polyclip-1.10-0/configure:4085:case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
r-cran-polyclip-1.10-0/configure-4086-*datarootdir*) ac_datarootdir_seen=yes;;
##############################################
r-cran-polyclip-1.10-0/configure-4101-
r-cran-polyclip-1.10-0/configure:4102:# Neutralize VPATH when `$srcdir' = `.'.
r-cran-polyclip-1.10-0/configure-4103-# Shell code in configure.ac might set extrasub.
##############################################
r-cran-polyclip-1.10-0/configure-4127-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
r-cran-polyclip-1.10-0/configure:4128: { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
r-cran-polyclip-1.10-0/configure-4129- { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \