=========================================================== .___ __ __ _________________ __ __ __| _/|__|/ |_ / ___\_` __ \__ \ | | \/ __ | | \\_ __\ / /_/ > | \// __ \| | / /_/ | | || | \___ /|__| (____ /____/\____ | |__||__| /_____/ \/ \/ grep rough audit - static analysis tool v2.8 written by @Wireghoul =================================[justanotherhacker.com]=== spew-1.0.8/etc/Makefile.in-46-DIST_SOURCES = spew-1.0.8/etc/Makefile.in:47:am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; spew-1.0.8/etc/Makefile.in-48-am__vpath_adj = case $$p in \ spew-1.0.8/etc/Makefile.in:49: $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ spew-1.0.8/etc/Makefile.in-50- *) f=$$p;; \ spew-1.0.8/etc/Makefile.in-51- esac; spew-1.0.8/etc/Makefile.in:52:am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; spew-1.0.8/etc/Makefile.in-53-am__install_max = 40 spew-1.0.8/etc/Makefile.in-54-am__nobase_strip_setup = \ spew-1.0.8/etc/Makefile.in:55: srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` spew-1.0.8/etc/Makefile.in-56-am__nobase_strip = \ ############################################## spew-1.0.8/etc/Makefile.in-217- @list='$(sysconf_DATA)'; test -n "$(sysconfdir)" || list=; \ spew-1.0.8/etc/Makefile.in:218: files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ spew-1.0.8/etc/Makefile.in-219- test -n "$$files" || exit 0; \ ############################################## spew-1.0.8/etc/Makefile.in-229-distdir: $(DISTFILES) spew-1.0.8/etc/Makefile.in:230: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ spew-1.0.8/etc/Makefile.in:231: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ spew-1.0.8/etc/Makefile.in-232- list='$(DISTFILES)'; \ ############################################## spew-1.0.8/etc/Makefile.in-243- if test -d $$d/$$file; then \ spew-1.0.8/etc/Makefile.in:244: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ spew-1.0.8/etc/Makefile.in-245- if test -d "$(distdir)/$$file"; then \ ############################################## spew-1.0.8/config/missing-92- from any GNU archive site." spew-1.0.8/config/missing:93: files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' $configure_ac` spew-1.0.8/config/missing-94- test -z "$files" && files="config.h" ############################################## spew-1.0.8/config/missing-127- *.y) spew-1.0.8/config/missing:128: SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` spew-1.0.8/config/missing-129- if [ -f "$SRCFILE" ]; then ############################################## spew-1.0.8/config/missing-131- fi spew-1.0.8/config/missing:132: SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` spew-1.0.8/config/missing-133- if [ -f "$SRCFILE" ]; then ############################################## spew-1.0.8/config/missing-157- *.l) spew-1.0.8/config/missing:158: SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` spew-1.0.8/config/missing-159- if [ -f "$SRCFILE" ]; then ############################################## spew-1.0.8/config/missing-177- the \`GNU make' package. Grab either from any GNU archive site." spew-1.0.8/config/missing:178: file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` spew-1.0.8/config/missing-179- if test -z "$file"; then spew-1.0.8/config/missing:180: file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` spew-1.0.8/config/missing:181: file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file` spew-1.0.8/config/missing-182- fi ############################################## spew-1.0.8/config/depcomp-67- sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} spew-1.0.8/config/depcomp:68:tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} spew-1.0.8/config/depcomp-69- ############################################## spew-1.0.8/config/depcomp-224- # Version 6 uses the directory in both cases. spew-1.0.8/config/depcomp:225: dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` spew-1.0.8/config/depcomp-226- test "x$dir" = "x$object" && dir= spew-1.0.8/config/depcomp:227: base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` spew-1.0.8/config/depcomp-228- if test "$libtool" = yes; then ############################################## spew-1.0.8/config/depcomp-253- # Do two passes, one to just change these to spew-1.0.8/config/depcomp:254: # `$object: dependent.h' and one to simply `dependent.h:'. spew-1.0.8/config/depcomp-255- sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" ############################################## spew-1.0.8/config/depcomp-295- # Do two passes, one to just change these to spew-1.0.8/config/depcomp:296: # `$object: dependent.h' and one to simply `dependent.h:'. spew-1.0.8/config/depcomp-297- sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" ############################################## spew-1.0.8/config/depcomp-311- # Much of this is similar to the tru64 case; see comments there. spew-1.0.8/config/depcomp:312: dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` spew-1.0.8/config/depcomp-313- test "x$dir" = "x$object" && dir= spew-1.0.8/config/depcomp:314: base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` spew-1.0.8/config/depcomp-315- if test "$libtool" = yes; then ############################################## spew-1.0.8/config/depcomp-355- # Subdirectories are respected. spew-1.0.8/config/depcomp:356: dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` spew-1.0.8/config/depcomp-357- test "x$dir" = "x$object" && dir= spew-1.0.8/config/depcomp:358: base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` spew-1.0.8/config/depcomp-359- ############################################## spew-1.0.8/config/depcomp-501- done spew-1.0.8/config/depcomp:502: obj_suffix=`echo "$object" | sed 's/^.*\././'` spew-1.0.8/config/depcomp-503- touch "$tmpdepfile" ############################################## spew-1.0.8/config/mkinstalldirs-12-do spew-1.0.8/config/mkinstalldirs:13: set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'` spew-1.0.8/config/mkinstalldirs-14- shift ############################################## spew-1.0.8/config/install-sh-103- spew-1.0.8/config/install-sh:104: -t=*) transformarg=`echo $1 | sed 's/-t=//'` spew-1.0.8/config/install-sh-105- shift ############################################## spew-1.0.8/config/install-sh-107- spew-1.0.8/config/install-sh:108: -b=*) transformbasename=`echo $1 | sed 's/-b=//'` spew-1.0.8/config/install-sh-109- shift ############################################## spew-1.0.8/config/install-sh-169- then spew-1.0.8/config/install-sh:170: dst="$dst"/`basename $src` spew-1.0.8/config/install-sh-171- else ############################################## spew-1.0.8/config/install-sh-176-## this sed command emulates the dirname command spew-1.0.8/config/install-sh:177:dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` spew-1.0.8/config/install-sh-178- ############################################## spew-1.0.8/config/install-sh-190-IFS='%' spew-1.0.8/config/install-sh:191:set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` spew-1.0.8/config/install-sh-192-IFS="${oIFS}" ############################################## spew-1.0.8/config/install-sh-224- then spew-1.0.8/config/install-sh:225: dstfile=`basename $dst` spew-1.0.8/config/install-sh-226- else ############################################## spew-1.0.8/config/install-sh-234- then spew-1.0.8/config/install-sh:235: dstfile=`basename $dst` spew-1.0.8/config/install-sh-236- else ############################################## spew-1.0.8/config/config.sub-59- spew-1.0.8/config/config.sub:60:me=`echo "$0" | sed -e 's,.*/,,'` spew-1.0.8/config/config.sub-61- ############################################## spew-1.0.8/config/config.sub-124-# Here we must recognize all the valid KERNEL-OS combinations. spew-1.0.8/config/config.sub:125:maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` spew-1.0.8/config/config.sub-126-case $maybe_os in ############################################## spew-1.0.8/config/config.sub-131- os=-$maybe_os spew-1.0.8/config/config.sub:132: basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` spew-1.0.8/config/config.sub-133- ;; spew-1.0.8/config/config.sub-134- *) spew-1.0.8/config/config.sub:135: basic_machine=`echo $1 | sed 's/-[^-]*$//'` spew-1.0.8/config/config.sub-136- if [ $basic_machine != $1 ] spew-1.0.8/config/config.sub:137: then os=`echo $1 | sed 's/.*-/-/'` spew-1.0.8/config/config.sub-138- else os=; fi ############################################## spew-1.0.8/config/config.sub-185- os=-sco5v6 spew-1.0.8/config/config.sub:186: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` spew-1.0.8/config/config.sub-187- ;; ############################################## spew-1.0.8/config/config.sub-189- os=-sco3.2v5 spew-1.0.8/config/config.sub:190: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` spew-1.0.8/config/config.sub-191- ;; ############################################## spew-1.0.8/config/config.sub-193- os=-sco3.2v4 spew-1.0.8/config/config.sub:194: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` spew-1.0.8/config/config.sub-195- ;; spew-1.0.8/config/config.sub-196- -sco3.2.[4-9]*) spew-1.0.8/config/config.sub:197: os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` spew-1.0.8/config/config.sub:198: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` spew-1.0.8/config/config.sub-199- ;; ############################################## spew-1.0.8/config/config.sub-201- # Don't forget version if it is 3.2v4 or newer. spew-1.0.8/config/config.sub:202: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` spew-1.0.8/config/config.sub-203- ;; ############################################## spew-1.0.8/config/config.sub-205- # Don't forget version if it is 3.2v4 or newer. spew-1.0.8/config/config.sub:206: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` spew-1.0.8/config/config.sub-207- ;; ############################################## spew-1.0.8/config/config.sub-209- os=-sco3.2v2 spew-1.0.8/config/config.sub:210: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` spew-1.0.8/config/config.sub-211- ;; spew-1.0.8/config/config.sub-212- -udk*) spew-1.0.8/config/config.sub:213: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` spew-1.0.8/config/config.sub-214- ;; ############################################## spew-1.0.8/config/config.sub-216- os=-isc2.2 spew-1.0.8/config/config.sub:217: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` spew-1.0.8/config/config.sub-218- ;; ############################################## spew-1.0.8/config/config.sub-222- -isc*) spew-1.0.8/config/config.sub:223: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` spew-1.0.8/config/config.sub-224- ;; ############################################## spew-1.0.8/config/config.sub-228- -ptx*) spew-1.0.8/config/config.sub:229: basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` spew-1.0.8/config/config.sub-230- ;; spew-1.0.8/config/config.sub-231- -windowsnt*) spew-1.0.8/config/config.sub:232: os=`echo $os | sed -e 's/windowsnt/winnt/'` spew-1.0.8/config/config.sub-233- ;; ############################################## spew-1.0.8/config/config.sub-324- *-*-*) spew-1.0.8/config/config.sub:325: echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 spew-1.0.8/config/config.sub-326- exit 1 ############################################## spew-1.0.8/config/config.sub-435- amd64-*) spew-1.0.8/config/config.sub:436: basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` spew-1.0.8/config/config.sub-437- ;; ############################################## spew-1.0.8/config/config.sub-477- blackfin-*) spew-1.0.8/config/config.sub:478: basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'` spew-1.0.8/config/config.sub-479- os=-linux ############################################## spew-1.0.8/config/config.sub-680- i*86v32) spew-1.0.8/config/config.sub:681: basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` spew-1.0.8/config/config.sub-682- os=-sysv32 ############################################## spew-1.0.8/config/config.sub-684- i*86v4*) spew-1.0.8/config/config.sub:685: basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` spew-1.0.8/config/config.sub-686- os=-sysv4 ############################################## spew-1.0.8/config/config.sub-688- i*86v) spew-1.0.8/config/config.sub:689: basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` spew-1.0.8/config/config.sub-690- os=-sysv ############################################## spew-1.0.8/config/config.sub-692- i*86sol2) spew-1.0.8/config/config.sub:693: basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` spew-1.0.8/config/config.sub-694- os=-solaris2 ############################################## spew-1.0.8/config/config.sub-722- m68knommu-*) spew-1.0.8/config/config.sub:723: basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'` spew-1.0.8/config/config.sub-724- os=-linux ############################################## spew-1.0.8/config/config.sub-755- mips3*-*) spew-1.0.8/config/config.sub:756: basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` spew-1.0.8/config/config.sub-757- ;; spew-1.0.8/config/config.sub-758- mips3*) spew-1.0.8/config/config.sub:759: basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown spew-1.0.8/config/config.sub-760- ;; ############################################## spew-1.0.8/config/config.sub-773- ms1-*) spew-1.0.8/config/config.sub:774: basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` spew-1.0.8/config/config.sub-775- ;; ############################################## spew-1.0.8/config/config.sub-878- parisc-*) spew-1.0.8/config/config.sub:879: basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'` spew-1.0.8/config/config.sub-880- os=-linux ############################################## spew-1.0.8/config/config.sub-894- pc98-*) spew-1.0.8/config/config.sub:895: basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` spew-1.0.8/config/config.sub-896- ;; ############################################## spew-1.0.8/config/config.sub-909- pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) spew-1.0.8/config/config.sub:910: basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` spew-1.0.8/config/config.sub-911- ;; spew-1.0.8/config/config.sub-912- pentiumpro-* | p6-* | 6x86-* | athlon-*) spew-1.0.8/config/config.sub:913: basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` spew-1.0.8/config/config.sub-914- ;; spew-1.0.8/config/config.sub-915- pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) spew-1.0.8/config/config.sub:916: basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` spew-1.0.8/config/config.sub-917- ;; spew-1.0.8/config/config.sub-918- pentium4-*) spew-1.0.8/config/config.sub:919: basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` spew-1.0.8/config/config.sub-920- ;; ############################################## spew-1.0.8/config/config.sub-927- ;; spew-1.0.8/config/config.sub:928: ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` spew-1.0.8/config/config.sub-929- ;; ############################################## spew-1.0.8/config/config.sub-933- ppcle-* | powerpclittle-*) spew-1.0.8/config/config.sub:934: basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` spew-1.0.8/config/config.sub-935- ;; ############################################## spew-1.0.8/config/config.sub-937- ;; spew-1.0.8/config/config.sub:938: ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` spew-1.0.8/config/config.sub-939- ;; ############################################## spew-1.0.8/config/config.sub-943- ppc64le-* | powerpc64little-*) spew-1.0.8/config/config.sub:944: basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` spew-1.0.8/config/config.sub-945- ;; ############################################## spew-1.0.8/config/config.sub-1240- *) spew-1.0.8/config/config.sub:1241: echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 spew-1.0.8/config/config.sub-1242- exit 1 ############################################## spew-1.0.8/config/config.sub-1248- *-digital*) spew-1.0.8/config/config.sub:1249: basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` spew-1.0.8/config/config.sub-1250- ;; spew-1.0.8/config/config.sub-1251- *-commodore*) spew-1.0.8/config/config.sub:1252: basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` spew-1.0.8/config/config.sub-1253- ;; ############################################## spew-1.0.8/config/config.sub-1269- -solaris1 | -solaris1.*) spew-1.0.8/config/config.sub:1270: os=`echo $os | sed -e 's|solaris1|sunos4|'` spew-1.0.8/config/config.sub-1271- ;; ############################################## spew-1.0.8/config/config.sub-1281- -gnu/linux*) spew-1.0.8/config/config.sub:1282: os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` spew-1.0.8/config/config.sub-1283- ;; ############################################## spew-1.0.8/config/config.sub-1326- -nto*) spew-1.0.8/config/config.sub:1327: os=`echo $os | sed -e 's|nto|nto-qnx|'` spew-1.0.8/config/config.sub-1328- ;; ############################################## spew-1.0.8/config/config.sub-1333- -mac*) spew-1.0.8/config/config.sub:1334: os=`echo $os | sed -e 's|mac|macos|'` spew-1.0.8/config/config.sub-1335- ;; ############################################## spew-1.0.8/config/config.sub-1339- -linux*) spew-1.0.8/config/config.sub:1340: os=`echo $os | sed -e 's|linux|linux-gnu|'` spew-1.0.8/config/config.sub-1341- ;; spew-1.0.8/config/config.sub-1342- -sunos5*) spew-1.0.8/config/config.sub:1343: os=`echo $os | sed -e 's|sunos5|solaris2|'` spew-1.0.8/config/config.sub-1344- ;; spew-1.0.8/config/config.sub-1345- -sunos6*) spew-1.0.8/config/config.sub:1346: os=`echo $os | sed -e 's|sunos6|solaris3|'` spew-1.0.8/config/config.sub-1347- ;; ############################################## spew-1.0.8/config/config.sub-1394- -sinix5.*) spew-1.0.8/config/config.sub:1395: os=`echo $os | sed -e 's|sinix|sysv|'` spew-1.0.8/config/config.sub-1396- ;; ############################################## spew-1.0.8/config/config.sub-1450- # Get rid of the `-' at the beginning of $os. spew-1.0.8/config/config.sub:1451: os=`echo $os | sed 's/[^-]*-//'` spew-1.0.8/config/config.sub:1452: echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 spew-1.0.8/config/config.sub-1453- exit 1 ############################################## spew-1.0.8/config/config.sub-1701- esac spew-1.0.8/config/config.sub:1702: basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` spew-1.0.8/config/config.sub-1703- ;; ############################################## spew-1.0.8/config/config.guess-40- spew-1.0.8/config/config.guess:41:me=`echo "$0" | sed -e 's,.*/,,'` spew-1.0.8/config/config.guess-42- ############################################## spew-1.0.8/config/config.guess-110-: ${TMPDIR=/tmp} ; spew-1.0.8/config/config.guess:111: { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || spew-1.0.8/config/config.guess-112- { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || ############################################## spew-1.0.8/config/config.guess-196- *) spew-1.0.8/config/config.guess:197: release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` spew-1.0.8/config/config.guess-198- ;; ############################################## spew-1.0.8/config/config.guess-223- *4.0) spew-1.0.8/config/config.guess:224: UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` spew-1.0.8/config/config.guess-225- ;; spew-1.0.8/config/config.guess-226- *5.*) spew-1.0.8/config/config.guess:227: UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` spew-1.0.8/config/config.guess-228- ;; ############################################## spew-1.0.8/config/config.guess-233- # types through head -n 1, so we only detect the type of CPU 0. spew-1.0.8/config/config.guess:234: ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` spew-1.0.8/config/config.guess-235- case "$ALPHA_CPU_TYPE" in ############################################## spew-1.0.8/config/config.guess-271- # 1.2 uses "1.2" for uname -r. spew-1.0.8/config/config.guess:272: echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` spew-1.0.8/config/config.guess-273- exit ;; ############################################## spew-1.0.8/config/config.guess-328- s390x:SunOS:*:*) spew-1.0.8/config/config.guess:329: echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` spew-1.0.8/config/config.guess-330- exit ;; spew-1.0.8/config/config.guess-331- sun4H:SunOS:5.*:*) spew-1.0.8/config/config.guess:332: echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` spew-1.0.8/config/config.guess-333- exit ;; spew-1.0.8/config/config.guess-334- sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) spew-1.0.8/config/config.guess:335: echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` spew-1.0.8/config/config.guess-336- exit ;; ############################################## spew-1.0.8/config/config.guess-353- fi spew-1.0.8/config/config.guess:354: echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` spew-1.0.8/config/config.guess-355- exit ;; ############################################## spew-1.0.8/config/config.guess-359- # it's likely to be more like Solaris than SunOS4. spew-1.0.8/config/config.guess:360: echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` spew-1.0.8/config/config.guess-361- exit ;; ############################################## spew-1.0.8/config/config.guess-368- # Japanese Language versions have a version number like `4.1.3-JL'. spew-1.0.8/config/config.guess:369: echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` spew-1.0.8/config/config.guess-370- exit ;; ############################################## spew-1.0.8/config/config.guess-374- sun*:*:4.2BSD:*) spew-1.0.8/config/config.guess:375: UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` spew-1.0.8/config/config.guess-376- test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 ############################################## spew-1.0.8/config/config.guess-456- $CC_FOR_BUILD -o $dummy $dummy.c && spew-1.0.8/config/config.guess:457: dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && spew-1.0.8/config/config.guess:458: SYSTEM_NAME=`$dummy $dummyarg` && spew-1.0.8/config/config.guess-459- { echo "$SYSTEM_NAME"; exit; } ############################################## spew-1.0.8/config/config.guess-512- *:IRIX*:*:*) spew-1.0.8/config/config.guess:513: echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` spew-1.0.8/config/config.guess-514- exit ;; ############################################## spew-1.0.8/config/config.guess-542-EOF spew-1.0.8/config/config.guess:543: if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` spew-1.0.8/config/config.guess-544- then ############################################## spew-1.0.8/config/config.guess-555- *:AIX:*:[456]) spew-1.0.8/config/config.guess:556: IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` spew-1.0.8/config/config.guess-557- if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then ############################################## spew-1.0.8/config/config.guess-590- 9000/[34678]??:HP-UX:*:*) spew-1.0.8/config/config.guess:591: HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` spew-1.0.8/config/config.guess-592- case "${UNAME_MACHINE}" in ############################################## spew-1.0.8/config/config.guess-644-EOF spew-1.0.8/config/config.guess:645: (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` spew-1.0.8/config/config.guess-646- test -z "$HP_ARCH" && HP_ARCH=hppa ############################################## spew-1.0.8/config/config.guess-672- ia64:HP-UX:*:*) spew-1.0.8/config/config.guess:673: HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` spew-1.0.8/config/config.guess-674- echo ia64-hp-hpux${HPUX_REV} ############################################## spew-1.0.8/config/config.guess-702-EOF spew-1.0.8/config/config.guess:703: $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && spew-1.0.8/config/config.guess-704- { echo "$SYSTEM_NAME"; exit; } ############################################## spew-1.0.8/config/config.guess-773- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` spew-1.0.8/config/config.guess:774: FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` spew-1.0.8/config/config.guess-775- echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" ############################################## spew-1.0.8/config/config.guess-778- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` spew-1.0.8/config/config.guess:779: FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` spew-1.0.8/config/config.guess-780- echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" ############################################## spew-1.0.8/config/config.guess-793- pc98) spew-1.0.8/config/config.guess:794: echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; spew-1.0.8/config/config.guess-795- amd64) spew-1.0.8/config/config.guess:796: echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; spew-1.0.8/config/config.guess-797- *) spew-1.0.8/config/config.guess:798: echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; spew-1.0.8/config/config.guess-799- esac ############################################## spew-1.0.8/config/config.guess-847- prep*:SunOS:5.*:*) spew-1.0.8/config/config.guess:848: echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` spew-1.0.8/config/config.guess-849- exit ;; ############################################## spew-1.0.8/config/config.guess-851- # the GNU system spew-1.0.8/config/config.guess:852: echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` spew-1.0.8/config/config.guess-853- exit ;; ############################################## spew-1.0.8/config/config.guess-855- # other systems with GNU libc and userland spew-1.0.8/config/config.guess:856: echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu spew-1.0.8/config/config.guess-857- exit ;; ############################################## spew-1.0.8/config/config.guess-904-EOF spew-1.0.8/config/config.guess:905: eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'` spew-1.0.8/config/config.guess-906- echo "${UNAME_MACHINE}-pc-linux-${LIBC}" ############################################## spew-1.0.8/config/config.guess-932-EOF spew-1.0.8/config/config.guess:933: eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'` spew-1.0.8/config/config.guess-934- test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } ############################################## spew-1.0.8/config/config.guess-1014- i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) spew-1.0.8/config/config.guess:1015: UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` spew-1.0.8/config/config.guess-1016- if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then ############################################## spew-1.0.8/config/config.guess-1281- *:DragonFly:*:*) spew-1.0.8/config/config.guess:1282: echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` spew-1.0.8/config/config.guess-1283- exit ;; ############################################## spew-1.0.8/config/config.guess-1294- i*86:skyos:*:*) spew-1.0.8/config/config.guess:1295: echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' spew-1.0.8/config/config.guess-1296- exit ;; ############################################## spew-1.0.8/config/config.guess-1422- spew-1.0.8/config/config.guess:1423:$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && spew-1.0.8/config/config.guess-1424- { echo "$SYSTEM_NAME"; exit; } ############################################## spew-1.0.8/man/Makefile.in-45-DIST_SOURCES = spew-1.0.8/man/Makefile.in:46:am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; spew-1.0.8/man/Makefile.in-47-am__vpath_adj = case $$p in \ spew-1.0.8/man/Makefile.in:48: $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ spew-1.0.8/man/Makefile.in-49- *) f=$$p;; \ spew-1.0.8/man/Makefile.in-50- esac; spew-1.0.8/man/Makefile.in:51:am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; spew-1.0.8/man/Makefile.in-52-am__install_max = 40 spew-1.0.8/man/Makefile.in-53-am__nobase_strip_setup = \ spew-1.0.8/man/Makefile.in:54: srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` spew-1.0.8/man/Makefile.in-55-am__nobase_strip = \ ############################################## spew-1.0.8/man/Makefile.in-265- else :; fi spew-1.0.8/man/Makefile.in:266: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ spew-1.0.8/man/Makefile.in:267: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ spew-1.0.8/man/Makefile.in-268- list='$(DISTFILES)'; \ ############################################## spew-1.0.8/man/Makefile.in-279- if test -d $$d/$$file; then \ spew-1.0.8/man/Makefile.in:280: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ spew-1.0.8/man/Makefile.in-281- if test -d "$(distdir)/$$file"; then \ ############################################## spew-1.0.8/configure-43-if test -z "$BASH_VERSION$ZSH_VERSION" \ spew-1.0.8/configure:44: && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then spew-1.0.8/configure-45- as_echo='print -r --' spew-1.0.8/configure-46- as_echo_n='print -rn --' spew-1.0.8/configure:47:elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then spew-1.0.8/configure-48- as_echo='printf %s\n' ############################################## spew-1.0.8/configure-50-else spew-1.0.8/configure:51: if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then spew-1.0.8/configure-52- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' ############################################## spew-1.0.8/configure-60- expr "X$arg" : "X\\(.*\\)$as_nl"; spew-1.0.8/configure:61: arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; spew-1.0.8/configure-62- esac; ############################################## spew-1.0.8/configure-170- eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && spew-1.0.8/configure:171: test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 spew-1.0.8/configure-172-test \$(( 1 + 1 )) = 2 || exit 1" ############################################## spew-1.0.8/configure-286- case $as_dir in #( spew-1.0.8/configure:287: *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( spew-1.0.8/configure-288- *) as_qdir=$as_dir;; ############################################## spew-1.0.8/configure-351- { spew-1.0.8/configure:352: as_val=`expr "$@" || test $? -eq 1` spew-1.0.8/configure-353- } ############################################## spew-1.0.8/configure-358-# --------------------------------- spew-1.0.8/configure:359:# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are spew-1.0.8/configure-360-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the ############################################## spew-1.0.8/configure-421- eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && spew-1.0.8/configure:422: test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { spew-1.0.8/configure-423- # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) ############################################## spew-1.0.8/configure-512- esac; spew-1.0.8/configure:513: case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( spew-1.0.8/configure-514- ???[sx]*):;;*)false;;esac;fi ############################################## spew-1.0.8/configure-771- case $ac_option in spew-1.0.8/configure:772: *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; spew-1.0.8/configure-773- *) ac_optarg=yes ;; ############################################## spew-1.0.8/configure-814- -disable-* | --disable-*) spew-1.0.8/configure:815: ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` spew-1.0.8/configure-816- # Reject names that are not valid shell variable names. ############################################## spew-1.0.8/configure-819- ac_useropt_orig=$ac_useropt spew-1.0.8/configure:820: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` spew-1.0.8/configure-821- case $ac_user_opts in ############################################## spew-1.0.8/configure-840- -enable-* | --enable-*) spew-1.0.8/configure:841: ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` spew-1.0.8/configure-842- # Reject names that are not valid shell variable names. ############################################## spew-1.0.8/configure-845- ac_useropt_orig=$ac_useropt spew-1.0.8/configure:846: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` spew-1.0.8/configure-847- case $ac_user_opts in ############################################## spew-1.0.8/configure-1044- -with-* | --with-*) spew-1.0.8/configure:1045: ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` spew-1.0.8/configure-1046- # Reject names that are not valid shell variable names. ############################################## spew-1.0.8/configure-1049- ac_useropt_orig=$ac_useropt spew-1.0.8/configure:1050: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` spew-1.0.8/configure-1051- case $ac_user_opts in ############################################## spew-1.0.8/configure-1060- -without-* | --without-*) spew-1.0.8/configure:1061: ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` spew-1.0.8/configure-1062- # Reject names that are not valid shell variable names. ############################################## spew-1.0.8/configure-1065- ac_useropt_orig=$ac_useropt spew-1.0.8/configure:1066: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` spew-1.0.8/configure-1067- case $ac_user_opts in ############################################## spew-1.0.8/configure-1098- *=*) spew-1.0.8/configure:1099: ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` spew-1.0.8/configure-1100- # Reject names that are not valid shell variable names. ############################################## spew-1.0.8/configure-1119-if test -n "$ac_prev"; then spew-1.0.8/configure:1120: ac_option=--`echo $ac_prev | sed 's/_/-/g'` spew-1.0.8/configure-1121- as_fn_error "missing argument to $ac_option" ############################################## spew-1.0.8/configure-1141- */ ) spew-1.0.8/configure:1142: ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` spew-1.0.8/configure-1143- eval $ac_var=\$ac_val;; ############################################## spew-1.0.8/configure-1178-ac_ls_di=`ls -di .` && spew-1.0.8/configure:1179:ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || spew-1.0.8/configure-1180- as_fn_error "working directory cannot be determined" ############################################## spew-1.0.8/configure-1234-case $srcdir in spew-1.0.8/configure:1235:*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; spew-1.0.8/configure-1236-esac ############################################## spew-1.0.8/configure-1277-By default, \`make install' will install all the files in spew-1.0.8/configure:1278:\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify spew-1.0.8/configure:1279:an installation prefix other than \`$ac_default_prefix' using \`--prefix', spew-1.0.8/configure-1280-for instance \`--prefix=\$HOME'. ############################################## spew-1.0.8/configure-1360-*) spew-1.0.8/configure:1361: ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` spew-1.0.8/configure-1362- # A ".." for each directory in $ac_dir_suffix. spew-1.0.8/configure:1363: ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` spew-1.0.8/configure-1364- case $ac_top_builddir_sub in ############################################## spew-1.0.8/configure-2153- *\'*) spew-1.0.8/configure:2154: ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; spew-1.0.8/configure-2155- esac ############################################## spew-1.0.8/configure-2240- case $ac_val in spew-1.0.8/configure:2241: *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; spew-1.0.8/configure-2242- esac ############################################## spew-1.0.8/configure-2257- case $ac_val in spew-1.0.8/configure:2258: *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; spew-1.0.8/configure-2259- esac ############################################## spew-1.0.8/configure-2370- set,) spew-1.0.8/configure:2371: { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 spew-1.0.8/configure:2372:$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} spew-1.0.8/configure-2373- ac_cache_corrupted=: ;; ############################################## spew-1.0.8/configure-2381- # differences in whitespace do not lead to failure. spew-1.0.8/configure:2382: ac_old_val_w=`echo x $ac_old_val` spew-1.0.8/configure:2383: ac_new_val_w=`echo x $ac_new_val` spew-1.0.8/configure-2384- if test "$ac_old_val_w" != "$ac_new_val_w"; then ############################################## spew-1.0.8/configure-2401- case $ac_new_val in spew-1.0.8/configure:2402: *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; spew-1.0.8/configure-2403- *) ac_arg=$ac_var=$ac_new_val ;; ############################################## spew-1.0.8/configure-2604-if ( spew-1.0.8/configure:2605: set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` spew-1.0.8/configure-2606- if test "$*" = "X"; then spew-1.0.8/configure-2607- # -L didn't work. spew-1.0.8/configure:2608: set X `ls -t "$srcdir/configure" conftest.file` spew-1.0.8/configure-2609- fi ############################################## spew-1.0.8/configure-2640-ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' spew-1.0.8/configure:2641:program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` spew-1.0.8/configure-2642- spew-1.0.8/configure-2643-# expand $ac_aux_dir to an absolute path spew-1.0.8/configure:2644:am_aux_dir=`cd $ac_aux_dir && pwd` spew-1.0.8/configure-2645- ############################################## spew-1.0.8/configure-2785- { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue spew-1.0.8/configure:2786: case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( spew-1.0.8/configure-2787- 'mkdir (GNU coreutils) '* | \ ############################################## spew-1.0.8/configure-2864-set x ${MAKE-make} spew-1.0.8/configure:2865:ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` spew-1.0.8/configure-2866-if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then : ############################################## spew-1.0.8/configure-2874-# GNU make sometimes prints "make[1]: Entering...", which would confuse us. spew-1.0.8/configure:2875:case `${MAKE-make} -f conftest.make 2>/dev/null` in spew-1.0.8/configure-2876- *@@@%%%=?*=@@@%%%*) ############################################## spew-1.0.8/configure-2901- spew-1.0.8/configure:2902:if test "`cd $srcdir && pwd`" != "`pwd`"; then spew-1.0.8/configure-2903- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output ############################################## spew-1.0.8/configure-3121-$as_echo_n "checking for C++ compiler default output file name... " >&6; } spew-1.0.8/configure:3122:ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` spew-1.0.8/configure-3123- ############################################## spew-1.0.8/configure-3165- then :; else spew-1.0.8/configure:3166: ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` spew-1.0.8/configure-3167- fi ############################################## spew-1.0.8/configure-3259- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; spew-1.0.8/configure:3260: *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` spew-1.0.8/configure-3261- break;; ############################################## spew-1.0.8/configure-3309- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; spew-1.0.8/configure:3310: *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` spew-1.0.8/configure-3311- break;; ############################################## spew-1.0.8/configure-3468-# Ignore all kinds of additional output from `make'. spew-1.0.8/configure:3469:case `$am_make -s -f confmf 2> /dev/null` in #( spew-1.0.8/configure-3470-*the\ am__doit\ target*) ############################################## spew-1.0.8/configure-3478- echo '.include "confinc"' > confmf spew-1.0.8/configure:3479: case `$am_make -s -f confmf 2> /dev/null` in #( spew-1.0.8/configure-3480- *the\ am__doit\ target*) ############################################## spew-1.0.8/configure-3539- if test "$am_compiler_list" = ""; then spew-1.0.8/configure:3540: am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` spew-1.0.8/configure-3541- fi ############################################## spew-1.0.8/configure-4206- if test "$am_compiler_list" = ""; then spew-1.0.8/configure:4207: am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` spew-1.0.8/configure-4208- fi ############################################## spew-1.0.8/configure-4309-set x ${MAKE-make} spew-1.0.8/configure:4310:ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` spew-1.0.8/configure-4311-if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then : ############################################## spew-1.0.8/configure-4319-# GNU make sometimes prints "make[1]: Entering...", which would confuse us. spew-1.0.8/configure:4320:case `${MAKE-make} -f conftest.make 2>/dev/null` in spew-1.0.8/configure-4321- *@@@%%%=?*=@@@%%%*) ############################################## spew-1.0.8/configure-4696- # Check for GNU $ac_path_GREP spew-1.0.8/configure:4697:case `"$ac_path_GREP" --version 2>&1` in spew-1.0.8/configure-4698-*GNU*) ############################################## spew-1.0.8/configure-4762- # Check for GNU $ac_path_EGREP spew-1.0.8/configure:4763:case `"$ac_path_EGREP" --version 2>&1` in spew-1.0.8/configure-4764-*GNU*) ############################################## spew-1.0.8/configure-4923-do : spew-1.0.8/configure:4924: as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` spew-1.0.8/configure-4925-ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default ############################################## spew-1.0.8/configure-4929- cat >>confdefs.h <<_ACEOF spew-1.0.8/configure:4930:#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 spew-1.0.8/configure-4931-_ACEOF ############################################## spew-1.0.8/configure-4939-do : spew-1.0.8/configure:4940: as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` spew-1.0.8/configure-4941-ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" ############################################## spew-1.0.8/configure-4944- cat >>confdefs.h <<_ACEOF spew-1.0.8/configure:4945:#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 spew-1.0.8/configure-4946-_ACEOF ############################################## spew-1.0.8/configure-5721-do : spew-1.0.8/configure:5722: as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` spew-1.0.8/configure-5723-ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" ############################################## spew-1.0.8/configure-5726- cat >>confdefs.h <<_ACEOF spew-1.0.8/configure:5727:#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 spew-1.0.8/configure-5728-_ACEOF ############################################## spew-1.0.8/configure-5848- ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' spew-1.0.8/configure:5849: ac_i=`$as_echo "$ac_i" | sed "$ac_script"` spew-1.0.8/configure-5850- # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR ############################################## spew-1.0.8/configure-5939-if test -z "$BASH_VERSION$ZSH_VERSION" \ spew-1.0.8/configure:5940: && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then spew-1.0.8/configure-5941- as_echo='print -r --' spew-1.0.8/configure-5942- as_echo_n='print -rn --' spew-1.0.8/configure:5943:elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then spew-1.0.8/configure-5944- as_echo='printf %s\n' ############################################## spew-1.0.8/configure-5946-else spew-1.0.8/configure:5947: if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then spew-1.0.8/configure-5948- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' ############################################## spew-1.0.8/configure-5956- expr "X$arg" : "X\\(.*\\)$as_nl"; spew-1.0.8/configure:5957: arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; spew-1.0.8/configure-5958- esac; ############################################## spew-1.0.8/configure-6032-# --------------------------------- spew-1.0.8/configure:6033:# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are spew-1.0.8/configure-6034-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the ############################################## spew-1.0.8/configure-6104- { spew-1.0.8/configure:6105: as_val=`expr "$@" || test $? -eq 1` spew-1.0.8/configure-6106- } ############################################## spew-1.0.8/configure-6208- case $as_dir in #( spew-1.0.8/configure:6209: *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( spew-1.0.8/configure-6210- *) as_qdir=$as_dir;; ############################################## spew-1.0.8/configure-6265- esac; spew-1.0.8/configure:6266: case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( spew-1.0.8/configure-6267- ???[sx]*):;;*)false;;esac;fi ############################################## spew-1.0.8/configure-6357-configured by $0, generated by GNU Autoconf 2.64, spew-1.0.8/configure:6358: with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" spew-1.0.8/configure-6359- ############################################## spew-1.0.8/configure-6378- --*=*) spew-1.0.8/configure:6379: ac_option=`expr "X$1" : 'X\([^=]*\)='` spew-1.0.8/configure:6380: ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` spew-1.0.8/configure-6381- ac_shift=: ############################################## spew-1.0.8/configure-6400- case $ac_optarg in spew-1.0.8/configure:6401: *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; spew-1.0.8/configure-6402- esac ############################################## spew-1.0.8/configure-6407- case $ac_optarg in spew-1.0.8/configure:6408: *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; spew-1.0.8/configure-6409- esac ############################################## spew-1.0.8/configure-6536-fi spew-1.0.8/configure:6537:ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null` spew-1.0.8/configure-6538-if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then ############################################## spew-1.0.8/configure-6553- as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5 spew-1.0.8/configure:6554:ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'` spew-1.0.8/configure-6555-ac_delim='%!_!# ' ############################################## spew-1.0.8/configure-6559- spew-1.0.8/configure:6560: ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` spew-1.0.8/configure-6561- if test $ac_delim_n = $ac_delim_num; then ############################################## spew-1.0.8/configure-6689-for ac_last_try in false false :; do spew-1.0.8/configure:6690: ac_t=`sed -n "/$ac_delim/p" confdefs.h` spew-1.0.8/configure-6691- if test -z "$ac_t"; then ############################################## spew-1.0.8/configure-6821- esac spew-1.0.8/configure:6822: case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac spew-1.0.8/configure-6823- as_fn_append ac_file_inputs " '$ac_f'" ############################################## spew-1.0.8/configure-6880-*) spew-1.0.8/configure:6881: ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` spew-1.0.8/configure-6882- # A ".." for each directory in $ac_dir_suffix. spew-1.0.8/configure:6883: ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` spew-1.0.8/configure-6884- case $ac_top_builddir_sub in ############################################## spew-1.0.8/configure-6941-/@mandir@/p' spew-1.0.8/configure:6942:case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in spew-1.0.8/configure-6943-*datarootdir*) ac_datarootdir_seen=yes;; ############################################## spew-1.0.8/configure-6958- spew-1.0.8/configure:6959:# Neutralize VPATH when `$srcdir' = `.'. spew-1.0.8/configure-6960-# Shell code in configure.ac might set extrasub. ############################################## spew-1.0.8/configure-6986-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && spew-1.0.8/configure:6987: { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && spew-1.0.8/configure:6988: { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && spew-1.0.8/configure-6989- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' ############################################## spew-1.0.8/configure-7031- * ) spew-1.0.8/configure:7032: _am_stamp_count=`expr $_am_stamp_count + 1` ;; spew-1.0.8/configure-7033- esac ############################################## spew-1.0.8/configure-7078- # Strip MF so we end up with the name of the file. spew-1.0.8/configure:7079: mf=`echo "$mf" | sed -e 's/:.*$//'` spew-1.0.8/configure-7080- # Check whether this is an Automake generated Makefile or not. ############################################## spew-1.0.8/configure-7115- # from the Makefile without running `make'. spew-1.0.8/configure:7116: DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` spew-1.0.8/configure-7117- test -z "$DEPDIR" && continue spew-1.0.8/configure:7118: am__include=`sed -n 's/^am__include = //p' < "$mf"` spew-1.0.8/configure-7119- test -z "am__include" && continue spew-1.0.8/configure:7120: am__quote=`sed -n 's/^am__quote = //p' < "$mf"` spew-1.0.8/configure-7121- # When using ansi2knr, U may be empty or an underscore; expand it spew-1.0.8/configure:7122: U=`sed -n 's/^U = //p' < "$mf"` spew-1.0.8/configure-7123- # Find all dependency output files, they are included files with ############################################## spew-1.0.8/aclocal.m4-67-# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to spew-1.0.8/aclocal.m4:68:# `$srcdir', `$srcdir/..', or `$srcdir/../..'. spew-1.0.8/aclocal.m4-69-# ############################################## spew-1.0.8/aclocal.m4-91-# iff we strip the leading $srcdir from $ac_aux_dir. That would be: spew-1.0.8/aclocal.m4:92:# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` spew-1.0.8/aclocal.m4-93-# and then we would define $MISSING as ############################################## spew-1.0.8/aclocal.m4-107-# expand $ac_aux_dir to an absolute path spew-1.0.8/aclocal.m4:108:am_aux_dir=`cd $ac_aux_dir && pwd` spew-1.0.8/aclocal.m4-109-]) ############################################## spew-1.0.8/aclocal.m4-208- if test "$am_compiler_list" = ""; then spew-1.0.8/aclocal.m4:209: am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` spew-1.0.8/aclocal.m4-210- fi ############################################## spew-1.0.8/aclocal.m4-354- # Strip MF so we end up with the name of the file. spew-1.0.8/aclocal.m4:355: mf=`echo "$mf" | sed -e 's/:.*$//'` spew-1.0.8/aclocal.m4-356- # Check whether this is an Automake generated Makefile or not. ############################################## spew-1.0.8/aclocal.m4-363- if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then spew-1.0.8/aclocal.m4:364: dirpart=`AS_DIRNAME("$mf")` spew-1.0.8/aclocal.m4-365- else ############################################## spew-1.0.8/aclocal.m4-369- # from the Makefile without running `make'. spew-1.0.8/aclocal.m4:370: DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` spew-1.0.8/aclocal.m4-371- test -z "$DEPDIR" && continue spew-1.0.8/aclocal.m4:372: am__include=`sed -n 's/^am__include = //p' < "$mf"` spew-1.0.8/aclocal.m4-373- test -z "am__include" && continue spew-1.0.8/aclocal.m4:374: am__quote=`sed -n 's/^am__quote = //p' < "$mf"` spew-1.0.8/aclocal.m4-375- # When using ansi2knr, U may be empty or an underscore; expand it spew-1.0.8/aclocal.m4:376: U=`sed -n 's/^U = //p' < "$mf"` spew-1.0.8/aclocal.m4-377- # Find all dependency output files, they are included files with ############################################## spew-1.0.8/aclocal.m4-385- test -f "$dirpart/$file" && continue spew-1.0.8/aclocal.m4:386: fdir=`AS_DIRNAME(["$file"])` spew-1.0.8/aclocal.m4-387- AS_MKDIR_P([$dirpart/$fdir]) ############################################## spew-1.0.8/aclocal.m4-452-AC_REQUIRE([AC_PROG_INSTALL])dnl spew-1.0.8/aclocal.m4:453:if test "`cd $srcdir && pwd`" != "`pwd`"; then spew-1.0.8/aclocal.m4-454- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output ############################################## spew-1.0.8/aclocal.m4-554- * ) spew-1.0.8/aclocal.m4:555: _am_stamp_count=`expr $_am_stamp_count + 1` ;; spew-1.0.8/aclocal.m4-556- esac spew-1.0.8/aclocal.m4-557-done spew-1.0.8/aclocal.m4:558:echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) spew-1.0.8/aclocal.m4-559- ############################################## spew-1.0.8/aclocal.m4-669-# Ignore all kinds of additional output from `make'. spew-1.0.8/aclocal.m4:670:case `$am_make -s -f confmf 2> /dev/null` in #( spew-1.0.8/aclocal.m4-671-*the\ am__doit\ target*) ############################################## spew-1.0.8/aclocal.m4-679- echo '.include "confinc"' > confmf spew-1.0.8/aclocal.m4:680: case `$am_make -s -f confmf 2> /dev/null` in #( spew-1.0.8/aclocal.m4-681- *the\ am__doit\ target*) ############################################## spew-1.0.8/aclocal.m4-832-if ( spew-1.0.8/aclocal.m4:833: set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` spew-1.0.8/aclocal.m4-834- if test "$[*]" = "X"; then spew-1.0.8/aclocal.m4-835- # -L didn't work. spew-1.0.8/aclocal.m4:836: set X `ls -t "$srcdir/configure" conftest.file` spew-1.0.8/aclocal.m4-837- fi ############################################## spew-1.0.8/Makefile.in-80- while test -n "$$dir1"; do \ spew-1.0.8/Makefile.in:81: first=`echo "$$dir1" | sed -e "$$sed_first"`; \ spew-1.0.8/Makefile.in-82- if test "$$first" != "."; then \ spew-1.0.8/Makefile.in-83- if test "$$first" = ".."; then \ spew-1.0.8/Makefile.in:84: dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ spew-1.0.8/Makefile.in:85: dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ spew-1.0.8/Makefile.in-86- else \ spew-1.0.8/Makefile.in:87: first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ spew-1.0.8/Makefile.in-88- if test "$$first2" = "$$first"; then \ spew-1.0.8/Makefile.in:89: dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ spew-1.0.8/Makefile.in-90- else \ ############################################## spew-1.0.8/Makefile.in-95- fi; \ spew-1.0.8/Makefile.in:96: dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ spew-1.0.8/Makefile.in-97- done; \ ############################################## spew-1.0.8/Makefile.in-280- dot_seen=no; \ spew-1.0.8/Makefile.in:281: target=`echo $@ | sed s/-recursive//`; \ spew-1.0.8/Makefile.in-282- list='$(SUBDIRS)'; for subdir in $$list; do \ ############################################## spew-1.0.8/Makefile.in-315- rev="$$rev ."; \ spew-1.0.8/Makefile.in:316: target=`echo $@ | sed s/-recursive//`; \ spew-1.0.8/Makefile.in-317- for subdir in $$rev; do \ ############################################## spew-1.0.8/Makefile.in-393-GTAGS: spew-1.0.8/Makefile.in:394: here=`$(am__cd) $(top_builddir) && pwd` \ spew-1.0.8/Makefile.in-395- && $(am__cd) $(top_srcdir) \ ############################################## spew-1.0.8/Makefile.in-403- test -d "$(distdir)" || mkdir "$(distdir)" spew-1.0.8/Makefile.in:404: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ spew-1.0.8/Makefile.in:405: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ spew-1.0.8/Makefile.in-406- list='$(DISTFILES)'; \ ############################################## spew-1.0.8/Makefile.in-417- if test -d $$d/$$file; then \ spew-1.0.8/Makefile.in:418: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ spew-1.0.8/Makefile.in-419- if test -d "$(distdir)/$$file"; then \ ############################################## spew-1.0.8/Makefile.in-524- test -d $(distdir)/_build || exit 0; \ spew-1.0.8/Makefile.in:525: dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ spew-1.0.8/Makefile.in-526- && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ ############################################## spew-1.0.8/Makefile.in-558- @$(am__cd) '$(distuninstallcheck_dir)' \ spew-1.0.8/Makefile.in:559: && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ spew-1.0.8/Makefile.in-560- || { echo "ERROR: files left after uninstall:" ; \ ############################################## spew-1.0.8/Makefile.in-570- fi spew-1.0.8/Makefile.in:571: @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ spew-1.0.8/Makefile.in-572- || { echo "ERROR: files left in build directory after distclean:" ; \ ############################################## spew-1.0.8/src/Makefile.in-359-.cpp.obj: spew-1.0.8/src/Makefile.in:360:@am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` spew-1.0.8/src/Makefile.in-361-@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ############################################## spew-1.0.8/src/Makefile.in-363-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ spew-1.0.8/src/Makefile.in:364:@am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` spew-1.0.8/src/Makefile.in-365- ############################################## spew-1.0.8/src/Makefile.in-410-GTAGS: spew-1.0.8/src/Makefile.in:411: here=`$(am__cd) $(top_builddir) && pwd` \ spew-1.0.8/src/Makefile.in-412- && $(am__cd) $(top_srcdir) \ ############################################## spew-1.0.8/src/Makefile.in-418-distdir: $(DISTFILES) spew-1.0.8/src/Makefile.in:419: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ spew-1.0.8/src/Makefile.in:420: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ spew-1.0.8/src/Makefile.in-421- list='$(DISTFILES)'; \ ############################################## spew-1.0.8/src/Makefile.in-432- if test -d $$d/$$file; then \ spew-1.0.8/src/Makefile.in:433: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ spew-1.0.8/src/Makefile.in-434- if test -d "$(distdir)/$$file"; then \