===========================================================
.___ __ __
_________________ __ __ __| _/|__|/ |_
/ ___\_` __ \__ \ | | \/ __ | | \\_ __\
/ /_/ > | \// __ \| | / /_/ | | || |
\___ /|__| (____ /____/\____ | |__||__|
/_____/ \/ \/
grep rough audit - static analysis tool
v2.8 written by @Wireghoul
=================================[justanotherhacker.com]===
urlview-0.9/install-sh-85-
urlview-0.9/install-sh:86: -t=*) transformarg=`echo $1 | sed 's/-t=//'`
urlview-0.9/install-sh-87- shift
##############################################
urlview-0.9/install-sh-89-
urlview-0.9/install-sh:90: -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
urlview-0.9/install-sh-91- shift
##############################################
urlview-0.9/install-sh-150- then
urlview-0.9/install-sh:151: dst="$dst"/`basename $src`
urlview-0.9/install-sh-152- else
##############################################
urlview-0.9/install-sh-157-## this sed command emulates the dirname command
urlview-0.9/install-sh:158:dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
urlview-0.9/install-sh-159-
##############################################
urlview-0.9/install-sh-171-IFS='%'
urlview-0.9/install-sh:172:set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
urlview-0.9/install-sh-173-IFS="${oIFS}"
##############################################
urlview-0.9/install-sh-205- then
urlview-0.9/install-sh:206: dstfile=`basename $dst`
urlview-0.9/install-sh-207- else
##############################################
urlview-0.9/install-sh-215- then
urlview-0.9/install-sh:216: dstfile=`basename $dst`
urlview-0.9/install-sh-217- else
##############################################
urlview-0.9/missing-113- the \`GNU make' package. Grab either from any GNU archive site."
urlview-0.9/missing:114: file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
urlview-0.9/missing-115- if test -z "$file"; then
urlview-0.9/missing:116: file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
urlview-0.9/missing:117: file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
urlview-0.9/missing-118- fi
##############################################
urlview-0.9/mkinstalldirs-12-do
urlview-0.9/mkinstalldirs:13: set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
urlview-0.9/mkinstalldirs-14- shift
##############################################
urlview-0.9/url_handler.sh-86-https)
urlview-0.9/url_handler.sh:87: prg=`getprg $https_prgs`
urlview-0.9/url_handler.sh-88- ;;
urlview-0.9/url_handler.sh-89-http)
urlview-0.9/url_handler.sh:90: prg=`getprg $http_prgs`
urlview-0.9/url_handler.sh-91- ;;
urlview-0.9/url_handler.sh-92-ftp)
urlview-0.9/url_handler.sh:93: prg=`getprg $ftp_prgs`
urlview-0.9/url_handler.sh-94- ;;
urlview-0.9/url_handler.sh-95-mailto)
urlview-0.9/url_handler.sh:96: prg=`getprg $mailto_prgs`
urlview-0.9/url_handler.sh-97- url="${url#mailto:}"
##############################################
urlview-0.9/url_handler.sh-99-gopher)
urlview-0.9/url_handler.sh:100: prg=`getprg $gopher_prgs`
urlview-0.9/url_handler.sh-101- ;;
##############################################
urlview-0.9/debian/url_handler.sh-107-https)
urlview-0.9/debian/url_handler.sh:108: prg=`getprg $https_prgs`
urlview-0.9/debian/url_handler.sh-109- ;;
urlview-0.9/debian/url_handler.sh-110-http)
urlview-0.9/debian/url_handler.sh:111: prg=`getprg $http_prgs`
urlview-0.9/debian/url_handler.sh-112- ;;
urlview-0.9/debian/url_handler.sh-113-ftp)
urlview-0.9/debian/url_handler.sh:114: prg=`getprg $ftp_prgs`
urlview-0.9/debian/url_handler.sh-115- ;;
urlview-0.9/debian/url_handler.sh-116-mailto)
urlview-0.9/debian/url_handler.sh:117: prg=`getprg $mailto_prgs`
urlview-0.9/debian/url_handler.sh-118- ;;
urlview-0.9/debian/url_handler.sh-119-gopher)
urlview-0.9/debian/url_handler.sh:120: prg=`getprg $gopher_prgs`
urlview-0.9/debian/url_handler.sh-121- ;;
urlview-0.9/debian/url_handler.sh-122-file)
urlview-0.9/debian/url_handler.sh:123: prg=`getprg $file_prgs`
urlview-0.9/debian/url_handler.sh-124- ;;
##############################################
urlview-0.9/Makefile.in-258-.c.obj:
urlview-0.9/Makefile.in:259: $(COMPILE) -c `$(CYGPATH_W) '$<'`
urlview-0.9/Makefile.in-260-
##############################################
urlview-0.9/Makefile.in-305-GTAGS:
urlview-0.9/Makefile.in:306: here=`$(am__cd) $(top_builddir) && pwd` \
urlview-0.9/Makefile.in-307- && $(am__cd) $(top_srcdir) \
##############################################
urlview-0.9/Makefile.in-315- test -d "$(distdir)" || mkdir "$(distdir)"
urlview-0.9/Makefile.in:316: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
urlview-0.9/Makefile.in:317: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
urlview-0.9/Makefile.in-318- list='$(DISTFILES)'; \
##############################################
urlview-0.9/Makefile.in-329- if test -d $$d/$$file; then \
urlview-0.9/Makefile.in:330: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
urlview-0.9/Makefile.in-331- if test -d "$(distdir)/$$file"; then \
##############################################
urlview-0.9/Makefile.in-409- test -d $(distdir)/_build || exit 0; \
urlview-0.9/Makefile.in:410: dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
urlview-0.9/Makefile.in-411- && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
##############################################
urlview-0.9/Makefile.in-443- @$(am__cd) '$(distuninstallcheck_dir)' \
urlview-0.9/Makefile.in:444: && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
urlview-0.9/Makefile.in-445- || { echo "ERROR: files left after uninstall:" ; \
##############################################
urlview-0.9/Makefile.in-455- fi
urlview-0.9/Makefile.in:456: @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
urlview-0.9/Makefile.in-457- || { echo "ERROR: files left in build directory after distclean:" ; \
##############################################
urlview-0.9/aclocal.m4-67-# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
urlview-0.9/aclocal.m4:68:# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
urlview-0.9/aclocal.m4-69-#
##############################################
urlview-0.9/aclocal.m4-91-# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
urlview-0.9/aclocal.m4:92:# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
urlview-0.9/aclocal.m4-93-# and then we would define $MISSING as
##############################################
urlview-0.9/aclocal.m4-107-# expand $ac_aux_dir to an absolute path
urlview-0.9/aclocal.m4:108:am_aux_dir=`cd $ac_aux_dir && pwd`
urlview-0.9/aclocal.m4-109-])
##############################################
urlview-0.9/aclocal.m4-231- if test "$am_compiler_list" = ""; then
urlview-0.9/aclocal.m4:232: am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
urlview-0.9/aclocal.m4-233- fi
##############################################
urlview-0.9/aclocal.m4-377- # Strip MF so we end up with the name of the file.
urlview-0.9/aclocal.m4:378: mf=`echo "$mf" | sed -e 's/:.*$//'`
urlview-0.9/aclocal.m4-379- # Check whether this is an Automake generated Makefile or not.
##############################################
urlview-0.9/aclocal.m4-386- if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
urlview-0.9/aclocal.m4:387: dirpart=`AS_DIRNAME("$mf")`
urlview-0.9/aclocal.m4-388- else
##############################################
urlview-0.9/aclocal.m4-392- # from the Makefile without running `make'.
urlview-0.9/aclocal.m4:393: DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
urlview-0.9/aclocal.m4-394- test -z "$DEPDIR" && continue
urlview-0.9/aclocal.m4:395: am__include=`sed -n 's/^am__include = //p' < "$mf"`
urlview-0.9/aclocal.m4-396- test -z "am__include" && continue
urlview-0.9/aclocal.m4:397: am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
urlview-0.9/aclocal.m4-398- # When using ansi2knr, U may be empty or an underscore; expand it
urlview-0.9/aclocal.m4:399: U=`sed -n 's/^U = //p' < "$mf"`
urlview-0.9/aclocal.m4-400- # Find all dependency output files, they are included files with
##############################################
urlview-0.9/aclocal.m4-408- test -f "$dirpart/$file" && continue
urlview-0.9/aclocal.m4:409: fdir=`AS_DIRNAME(["$file"])`
urlview-0.9/aclocal.m4-410- AS_MKDIR_P([$dirpart/$fdir])
##############################################
urlview-0.9/aclocal.m4-463-AC_REQUIRE([AC_PROG_INSTALL])dnl
urlview-0.9/aclocal.m4:464:if test "`cd $srcdir && pwd`" != "`pwd`"; then
urlview-0.9/aclocal.m4-465- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
##############################################
urlview-0.9/aclocal.m4-565- * )
urlview-0.9/aclocal.m4:566: _am_stamp_count=`expr $_am_stamp_count + 1` ;;
urlview-0.9/aclocal.m4-567- esac
urlview-0.9/aclocal.m4-568-done
urlview-0.9/aclocal.m4:569:echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
urlview-0.9/aclocal.m4-570-
##############################################
urlview-0.9/aclocal.m4-640-# Ignore all kinds of additional output from `make'.
urlview-0.9/aclocal.m4:641:case `$am_make -s -f confmf 2> /dev/null` in #(
urlview-0.9/aclocal.m4-642-*the\ am__doit\ target*)
##############################################
urlview-0.9/aclocal.m4-650- echo '.include "confinc"' > confmf
urlview-0.9/aclocal.m4:651: case `$am_make -s -f confmf 2> /dev/null` in #(
urlview-0.9/aclocal.m4-652- *the\ am__doit\ target*)
##############################################
urlview-0.9/aclocal.m4-803-if (
urlview-0.9/aclocal.m4:804: set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
urlview-0.9/aclocal.m4-805- if test "$[*]" = "X"; then
urlview-0.9/aclocal.m4-806- # -L didn't work.
urlview-0.9/aclocal.m4:807: set X `ls -t "$srcdir/configure" conftest.file`
urlview-0.9/aclocal.m4-808- fi
##############################################
urlview-0.9/config.guess-39-
urlview-0.9/config.guess:40:me=`echo "$0" | sed -e 's,.*/,,'`
urlview-0.9/config.guess-41-
##############################################
urlview-0.9/config.guess-108-: ${TMPDIR=/tmp} ;
urlview-0.9/config.guess:109: { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
urlview-0.9/config.guess-110- { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
##############################################
urlview-0.9/config.guess-193- *)
urlview-0.9/config.guess:194: release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
urlview-0.9/config.guess-195- ;;
##############################################
urlview-0.9/config.guess-217- *4.0)
urlview-0.9/config.guess:218: UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
urlview-0.9/config.guess-219- ;;
urlview-0.9/config.guess-220- *5.*)
urlview-0.9/config.guess:221: UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
urlview-0.9/config.guess-222- ;;
##############################################
urlview-0.9/config.guess-227- # types through head -n 1, so we only detect the type of CPU 0.
urlview-0.9/config.guess:228: ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
urlview-0.9/config.guess-229- case "$ALPHA_CPU_TYPE" in
##############################################
urlview-0.9/config.guess-265- # 1.2 uses "1.2" for uname -r.
urlview-0.9/config.guess:266: echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
urlview-0.9/config.guess-267- exit ;;
##############################################
urlview-0.9/config.guess-322- sun4H:SunOS:5.*:*)
urlview-0.9/config.guess:323: echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
urlview-0.9/config.guess-324- exit ;;
urlview-0.9/config.guess-325- sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
urlview-0.9/config.guess:326: echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
urlview-0.9/config.guess-327- exit ;;
urlview-0.9/config.guess-328- i86pc:SunOS:5.*:*)
urlview-0.9/config.guess:329: echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
urlview-0.9/config.guess-330- exit ;;
##############################################
urlview-0.9/config.guess-334- # it's likely to be more like Solaris than SunOS4.
urlview-0.9/config.guess:335: echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
urlview-0.9/config.guess-336- exit ;;
##############################################
urlview-0.9/config.guess-343- # Japanese Language versions have a version number like `4.1.3-JL'.
urlview-0.9/config.guess:344: echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
urlview-0.9/config.guess-345- exit ;;
##############################################
urlview-0.9/config.guess-349- sun*:*:4.2BSD:*)
urlview-0.9/config.guess:350: UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
urlview-0.9/config.guess-351- test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
##############################################
urlview-0.9/config.guess-431- $CC_FOR_BUILD -o $dummy $dummy.c &&
urlview-0.9/config.guess:432: dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
urlview-0.9/config.guess:433: SYSTEM_NAME=`$dummy $dummyarg` &&
urlview-0.9/config.guess-434- { echo "$SYSTEM_NAME"; exit; }
##############################################
urlview-0.9/config.guess-487- *:IRIX*:*:*)
urlview-0.9/config.guess:488: echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
urlview-0.9/config.guess-489- exit ;;
##############################################
urlview-0.9/config.guess-517-EOF
urlview-0.9/config.guess:518: if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
urlview-0.9/config.guess-519- then
##############################################
urlview-0.9/config.guess-530- *:AIX:*:[45])
urlview-0.9/config.guess:531: IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
urlview-0.9/config.guess-532- if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
##############################################
urlview-0.9/config.guess-565- 9000/[34678]??:HP-UX:*:*)
urlview-0.9/config.guess:566: HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
urlview-0.9/config.guess-567- case "${UNAME_MACHINE}" in
##############################################
urlview-0.9/config.guess-619-EOF
urlview-0.9/config.guess:620: (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
urlview-0.9/config.guess-621- test -z "$HP_ARCH" && HP_ARCH=hppa
##############################################
urlview-0.9/config.guess-647- ia64:HP-UX:*:*)
urlview-0.9/config.guess:648: HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
urlview-0.9/config.guess-649- echo ia64-hp-hpux${HPUX_REV}
##############################################
urlview-0.9/config.guess-677-EOF
urlview-0.9/config.guess:678: $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
urlview-0.9/config.guess-679- { echo "$SYSTEM_NAME"; exit; }
##############################################
urlview-0.9/config.guess-748- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
urlview-0.9/config.guess:749: FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
urlview-0.9/config.guess-750- echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
##############################################
urlview-0.9/config.guess-753- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
urlview-0.9/config.guess:754: FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
urlview-0.9/config.guess-755- echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
##############################################
urlview-0.9/config.guess-766- *:FreeBSD:*:*)
urlview-0.9/config.guess:767: echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
urlview-0.9/config.guess-768- exit ;;
##############################################
urlview-0.9/config.guess-803- prep*:SunOS:5.*:*)
urlview-0.9/config.guess:804: echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
urlview-0.9/config.guess-805- exit ;;
##############################################
urlview-0.9/config.guess-807- # the GNU system
urlview-0.9/config.guess:808: echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
urlview-0.9/config.guess-809- exit ;;
##############################################
urlview-0.9/config.guess-811- # other systems with GNU libc and userland
urlview-0.9/config.guess:812: echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
urlview-0.9/config.guess-813- exit ;;
##############################################
urlview-0.9/config.guess-853-EOF
urlview-0.9/config.guess:854: eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
urlview-0.9/config.guess-855- test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
##############################################
urlview-0.9/config.guess-872-EOF
urlview-0.9/config.guess:873: eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
urlview-0.9/config.guess-874- test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
##############################################
urlview-0.9/config.guess-976-EOF
urlview-0.9/config.guess:977: eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
urlview-0.9/config.guess-978- test x"${LIBC}" != x && {
##############################################
urlview-0.9/config.guess-1018- i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
urlview-0.9/config.guess:1019: UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
urlview-0.9/config.guess-1020- if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
##############################################
urlview-0.9/config.guess-1251- *:DragonFly:*:*)
urlview-0.9/config.guess:1252: echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
urlview-0.9/config.guess-1253- exit ;;
##############################################
urlview-0.9/config.guess-1264- i*86:skyos:*:*)
urlview-0.9/config.guess:1265: echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
urlview-0.9/config.guess-1266- exit ;;
##############################################
urlview-0.9/config.guess-1386-
urlview-0.9/config.guess:1387:$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
urlview-0.9/config.guess-1388- { echo "$SYSTEM_NAME"; exit; }
##############################################
urlview-0.9/config.sub-55-
urlview-0.9/config.sub:56:me=`echo "$0" | sed -e 's,.*/,,'`
urlview-0.9/config.sub-57-
##############################################
urlview-0.9/config.sub-119-# Here we must recognize all the valid KERNEL-OS combinations.
urlview-0.9/config.sub:120:maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
urlview-0.9/config.sub-121-case $maybe_os in
##############################################
urlview-0.9/config.sub-124- os=-$maybe_os
urlview-0.9/config.sub:125: basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
urlview-0.9/config.sub-126- ;;
urlview-0.9/config.sub-127- *)
urlview-0.9/config.sub:128: basic_machine=`echo $1 | sed 's/-[^-]*$//'`
urlview-0.9/config.sub-129- if [ $basic_machine != $1 ]
urlview-0.9/config.sub:130: then os=`echo $1 | sed 's/.*-/-/'`
urlview-0.9/config.sub-131- else os=; fi
##############################################
urlview-0.9/config.sub-175- os=-sco3.2v5
urlview-0.9/config.sub:176: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
urlview-0.9/config.sub-177- ;;
##############################################
urlview-0.9/config.sub-179- os=-sco3.2v4
urlview-0.9/config.sub:180: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
urlview-0.9/config.sub-181- ;;
urlview-0.9/config.sub-182- -sco3.2.[4-9]*)
urlview-0.9/config.sub:183: os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
urlview-0.9/config.sub:184: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
urlview-0.9/config.sub-185- ;;
##############################################
urlview-0.9/config.sub-187- # Don't forget version if it is 3.2v4 or newer.
urlview-0.9/config.sub:188: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
urlview-0.9/config.sub-189- ;;
##############################################
urlview-0.9/config.sub-191- os=-sco3.2v2
urlview-0.9/config.sub:192: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
urlview-0.9/config.sub-193- ;;
urlview-0.9/config.sub-194- -udk*)
urlview-0.9/config.sub:195: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
urlview-0.9/config.sub-196- ;;
##############################################
urlview-0.9/config.sub-198- os=-isc2.2
urlview-0.9/config.sub:199: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
urlview-0.9/config.sub-200- ;;
##############################################
urlview-0.9/config.sub-204- -isc*)
urlview-0.9/config.sub:205: basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
urlview-0.9/config.sub-206- ;;
##############################################
urlview-0.9/config.sub-210- -ptx*)
urlview-0.9/config.sub:211: basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
urlview-0.9/config.sub-212- ;;
urlview-0.9/config.sub-213- -windowsnt*)
urlview-0.9/config.sub:214: os=`echo $os | sed -e 's/windowsnt/winnt/'`
urlview-0.9/config.sub-215- ;;
##############################################
urlview-0.9/config.sub-297- *-*-*)
urlview-0.9/config.sub:298: echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
urlview-0.9/config.sub-299- exit 1
##############################################
urlview-0.9/config.sub-400- amd64-*)
urlview-0.9/config.sub:401: basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
urlview-0.9/config.sub-402- ;;
##############################################
urlview-0.9/config.sub-621- i*86v32)
urlview-0.9/config.sub:622: basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
urlview-0.9/config.sub-623- os=-sysv32
##############################################
urlview-0.9/config.sub-625- i*86v4*)
urlview-0.9/config.sub:626: basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
urlview-0.9/config.sub-627- os=-sysv4
##############################################
urlview-0.9/config.sub-629- i*86v)
urlview-0.9/config.sub:630: basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
urlview-0.9/config.sub-631- os=-sysv
##############################################
urlview-0.9/config.sub-633- i*86sol2)
urlview-0.9/config.sub:634: basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
urlview-0.9/config.sub-635- os=-solaris2
##############################################
urlview-0.9/config.sub-681- mips3*-*)
urlview-0.9/config.sub:682: basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
urlview-0.9/config.sub-683- ;;
urlview-0.9/config.sub-684- mips3*)
urlview-0.9/config.sub:685: basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
urlview-0.9/config.sub-686- ;;
##############################################
urlview-0.9/config.sub-818- pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
urlview-0.9/config.sub:819: basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
urlview-0.9/config.sub-820- ;;
urlview-0.9/config.sub-821- pentiumpro-* | p6-* | 6x86-* | athlon-*)
urlview-0.9/config.sub:822: basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
urlview-0.9/config.sub-823- ;;
urlview-0.9/config.sub-824- pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
urlview-0.9/config.sub:825: basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
urlview-0.9/config.sub-826- ;;
urlview-0.9/config.sub-827- pentium4-*)
urlview-0.9/config.sub:828: basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
urlview-0.9/config.sub-829- ;;
##############################################
urlview-0.9/config.sub-836- ;;
urlview-0.9/config.sub:837: ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
urlview-0.9/config.sub-838- ;;
##############################################
urlview-0.9/config.sub-842- ppcle-* | powerpclittle-*)
urlview-0.9/config.sub:843: basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
urlview-0.9/config.sub-844- ;;
##############################################
urlview-0.9/config.sub-846- ;;
urlview-0.9/config.sub:847: ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
urlview-0.9/config.sub-848- ;;
##############################################
urlview-0.9/config.sub-852- ppc64le-* | powerpc64little-*)
urlview-0.9/config.sub:853: basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
urlview-0.9/config.sub-854- ;;
##############################################
urlview-0.9/config.sub-1125- *)
urlview-0.9/config.sub:1126: echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
urlview-0.9/config.sub-1127- exit 1
##############################################
urlview-0.9/config.sub-1133- *-digital*)
urlview-0.9/config.sub:1134: basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
urlview-0.9/config.sub-1135- ;;
urlview-0.9/config.sub-1136- *-commodore*)
urlview-0.9/config.sub:1137: basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
urlview-0.9/config.sub-1138- ;;
##############################################
urlview-0.9/config.sub-1151- -solaris1 | -solaris1.*)
urlview-0.9/config.sub:1152: os=`echo $os | sed -e 's|solaris1|sunos4|'`
urlview-0.9/config.sub-1153- ;;
##############################################
urlview-0.9/config.sub-1163- -gnu/linux*)
urlview-0.9/config.sub:1164: os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
urlview-0.9/config.sub-1165- ;;
##############################################
urlview-0.9/config.sub-1205- -nto*)
urlview-0.9/config.sub:1206: os=`echo $os | sed -e 's|nto|nto-qnx|'`
urlview-0.9/config.sub-1207- ;;
##############################################
urlview-0.9/config.sub-1212- -mac*)
urlview-0.9/config.sub:1213: os=`echo $os | sed -e 's|mac|macos|'`
urlview-0.9/config.sub-1214- ;;
##############################################
urlview-0.9/config.sub-1218- -linux*)
urlview-0.9/config.sub:1219: os=`echo $os | sed -e 's|linux|linux-gnu|'`
urlview-0.9/config.sub-1220- ;;
urlview-0.9/config.sub-1221- -sunos5*)
urlview-0.9/config.sub:1222: os=`echo $os | sed -e 's|sunos5|solaris2|'`
urlview-0.9/config.sub-1223- ;;
urlview-0.9/config.sub-1224- -sunos6*)
urlview-0.9/config.sub:1225: os=`echo $os | sed -e 's|sunos6|solaris3|'`
urlview-0.9/config.sub-1226- ;;
##############################################
urlview-0.9/config.sub-1273- -sinix5.*)
urlview-0.9/config.sub:1274: os=`echo $os | sed -e 's|sinix|sysv|'`
urlview-0.9/config.sub-1275- ;;
##############################################
urlview-0.9/config.sub-1324- # Get rid of the `-' at the beginning of $os.
urlview-0.9/config.sub:1325: os=`echo $os | sed 's/[^-]*-//'`
urlview-0.9/config.sub:1326: echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
urlview-0.9/config.sub-1327- exit 1
##############################################
urlview-0.9/config.sub-1566- esac
urlview-0.9/config.sub:1567: basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
urlview-0.9/config.sub-1568- ;;
##############################################
urlview-0.9/configure-45-if test -z "$BASH_VERSION$ZSH_VERSION" \
urlview-0.9/configure:46: && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
urlview-0.9/configure-47- as_echo='print -r --'
urlview-0.9/configure-48- as_echo_n='print -rn --'
urlview-0.9/configure:49:elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
urlview-0.9/configure-50- as_echo='printf %s\n'
##############################################
urlview-0.9/configure-52-else
urlview-0.9/configure:53: if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
urlview-0.9/configure-54- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
##############################################
urlview-0.9/configure-62- expr "X$arg" : "X\\(.*\\)$as_nl";
urlview-0.9/configure:63: arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
urlview-0.9/configure-64- esac;
##############################################
urlview-0.9/configure-172- eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
urlview-0.9/configure:173: test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
urlview-0.9/configure-174-test \$(( 1 + 1 )) = 2 || exit 1"
##############################################
urlview-0.9/configure-288- case $as_dir in #(
urlview-0.9/configure:289: *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
urlview-0.9/configure-290- *) as_qdir=$as_dir;;
##############################################
urlview-0.9/configure-353- {
urlview-0.9/configure:354: as_val=`expr "$@" || test $? -eq 1`
urlview-0.9/configure-355- }
##############################################
urlview-0.9/configure-360-# ----------------------------------------
urlview-0.9/configure:361:# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
urlview-0.9/configure-362-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
##############################################
urlview-0.9/configure-423- eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
urlview-0.9/configure:424: test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
urlview-0.9/configure-425- # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
##############################################
urlview-0.9/configure-514- esac;
urlview-0.9/configure:515: case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
urlview-0.9/configure-516- ???[sx]*):;;*)false;;esac;fi
##############################################
urlview-0.9/configure-756- case $ac_option in
urlview-0.9/configure:757: *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
urlview-0.9/configure-758- *=) ac_optarg= ;;
##############################################
urlview-0.9/configure-800- -disable-* | --disable-*)
urlview-0.9/configure:801: ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
urlview-0.9/configure-802- # Reject names that are not valid shell variable names.
##############################################
urlview-0.9/configure-805- ac_useropt_orig=$ac_useropt
urlview-0.9/configure:806: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
urlview-0.9/configure-807- case $ac_user_opts in
##############################################
urlview-0.9/configure-826- -enable-* | --enable-*)
urlview-0.9/configure:827: ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
urlview-0.9/configure-828- # Reject names that are not valid shell variable names.
##############################################
urlview-0.9/configure-831- ac_useropt_orig=$ac_useropt
urlview-0.9/configure:832: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
urlview-0.9/configure-833- case $ac_user_opts in
##############################################
urlview-0.9/configure-1030- -with-* | --with-*)
urlview-0.9/configure:1031: ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
urlview-0.9/configure-1032- # Reject names that are not valid shell variable names.
##############################################
urlview-0.9/configure-1035- ac_useropt_orig=$ac_useropt
urlview-0.9/configure:1036: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
urlview-0.9/configure-1037- case $ac_user_opts in
##############################################
urlview-0.9/configure-1046- -without-* | --without-*)
urlview-0.9/configure:1047: ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
urlview-0.9/configure-1048- # Reject names that are not valid shell variable names.
##############################################
urlview-0.9/configure-1051- ac_useropt_orig=$ac_useropt
urlview-0.9/configure:1052: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
urlview-0.9/configure-1053- case $ac_user_opts in
##############################################
urlview-0.9/configure-1084- *=*)
urlview-0.9/configure:1085: ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
urlview-0.9/configure-1086- # Reject names that are not valid shell variable names.
##############################################
urlview-0.9/configure-1105-if test -n "$ac_prev"; then
urlview-0.9/configure:1106: ac_option=--`echo $ac_prev | sed 's/_/-/g'`
urlview-0.9/configure-1107- as_fn_error $? "missing argument to $ac_option"
##############################################
urlview-0.9/configure-1127- */ )
urlview-0.9/configure:1128: ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
urlview-0.9/configure-1129- eval $ac_var=\$ac_val;;
##############################################
urlview-0.9/configure-1164-ac_ls_di=`ls -di .` &&
urlview-0.9/configure:1165:ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
urlview-0.9/configure-1166- as_fn_error $? "working directory cannot be determined"
##############################################
urlview-0.9/configure-1220-case $srcdir in
urlview-0.9/configure:1221:*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
urlview-0.9/configure-1222-esac
##############################################
urlview-0.9/configure-1263-By default, \`make install' will install all the files in
urlview-0.9/configure:1264:\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
urlview-0.9/configure:1265:an installation prefix other than \`$ac_default_prefix' using \`--prefix',
urlview-0.9/configure-1266-for instance \`--prefix=\$HOME'.
##############################################
urlview-0.9/configure-1347-*)
urlview-0.9/configure:1348: ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
urlview-0.9/configure-1349- # A ".." for each directory in $ac_dir_suffix.
urlview-0.9/configure:1350: ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
urlview-0.9/configure-1351- case $ac_top_builddir_sub in
##############################################
urlview-0.9/configure-1831- *\'*)
urlview-0.9/configure:1832: ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
urlview-0.9/configure-1833- esac
##############################################
urlview-0.9/configure-1914- case $ac_val in
urlview-0.9/configure:1915: *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
urlview-0.9/configure-1916- esac
##############################################
urlview-0.9/configure-1929- case $ac_val in
urlview-0.9/configure:1930: *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
urlview-0.9/configure-1931- esac
##############################################
urlview-0.9/configure-2049- set,)
urlview-0.9/configure:2050: { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
urlview-0.9/configure:2051:$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
urlview-0.9/configure-2052- ac_cache_corrupted=: ;;
##############################################
urlview-0.9/configure-2060- # differences in whitespace do not lead to failure.
urlview-0.9/configure:2061: ac_old_val_w=`echo x $ac_old_val`
urlview-0.9/configure:2062: ac_new_val_w=`echo x $ac_new_val`
urlview-0.9/configure-2063- if test "$ac_old_val_w" != "$ac_new_val_w"; then
##############################################
urlview-0.9/configure-2080- case $ac_new_val in
urlview-0.9/configure:2081: *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
urlview-0.9/configure-2082- *) ac_arg=$ac_var=$ac_new_val ;;
##############################################
urlview-0.9/configure-2255-if (
urlview-0.9/configure:2256: set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
urlview-0.9/configure-2257- if test "$*" = "X"; then
urlview-0.9/configure-2258- # -L didn't work.
urlview-0.9/configure:2259: set X `ls -t "$srcdir/configure" conftest.file`
urlview-0.9/configure-2260- fi
##############################################
urlview-0.9/configure-2291-ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
urlview-0.9/configure:2292:program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
urlview-0.9/configure-2293-
urlview-0.9/configure-2294-# expand $ac_aux_dir to an absolute path
urlview-0.9/configure:2295:am_aux_dir=`cd $ac_aux_dir && pwd`
urlview-0.9/configure-2296-
##############################################
urlview-0.9/configure-2436- { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
urlview-0.9/configure:2437: case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
urlview-0.9/configure-2438- 'mkdir (GNU coreutils) '* | \
##############################################
urlview-0.9/configure-2515-set x ${MAKE-make}
urlview-0.9/configure:2516:ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
urlview-0.9/configure-2517-if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\"" = set; then :
##############################################
urlview-0.9/configure-2525-# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
urlview-0.9/configure:2526:case `${MAKE-make} -f conftest.make 2>/dev/null` in
urlview-0.9/configure-2527- *@@@%%%=?*=@@@%%%*)
##############################################
urlview-0.9/configure-2552-
urlview-0.9/configure:2553:if test "`cd $srcdir && pwd`" != "`pwd`"; then
urlview-0.9/configure-2554- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
##############################################
urlview-0.9/configure-2634-# Ignore all kinds of additional output from `make'.
urlview-0.9/configure:2635:case `$am_make -s -f confmf 2> /dev/null` in #(
urlview-0.9/configure-2636-*the\ am__doit\ target*)
##############################################
urlview-0.9/configure-2644- echo '.include "confinc"' > confmf
urlview-0.9/configure:2645: case `$am_make -s -f confmf 2> /dev/null` in #(
urlview-0.9/configure-2646- *the\ am__doit\ target*)
##############################################
urlview-0.9/configure-3022-$as_echo_n "checking whether the C compiler works... " >&6; }
urlview-0.9/configure:3023:ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
urlview-0.9/configure-3024-
##############################################
urlview-0.9/configure-3066- then :; else
urlview-0.9/configure:3067: ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
urlview-0.9/configure-3068- fi
##############################################
urlview-0.9/configure-3126- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
urlview-0.9/configure:3127: *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
urlview-0.9/configure-3128- break;;
##############################################
urlview-0.9/configure-3235- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
urlview-0.9/configure:3236: *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
urlview-0.9/configure-3237- break;;
##############################################
urlview-0.9/configure-3494- if test "$am_compiler_list" = ""; then
urlview-0.9/configure:3495: am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
urlview-0.9/configure-3496- fi
##############################################
urlview-0.9/configure-3755- # Check for GNU $ac_path_GREP
urlview-0.9/configure:3756:case `"$ac_path_GREP" --version 2>&1` in
urlview-0.9/configure-3757-*GNU*)
##############################################
urlview-0.9/configure-3821- # Check for GNU $ac_path_EGREP
urlview-0.9/configure:3822:case `"$ac_path_EGREP" --version 2>&1` in
urlview-0.9/configure-3823-*GNU*)
##############################################
urlview-0.9/configure-3982-do :
urlview-0.9/configure:3983: as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
urlview-0.9/configure-3984-ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
##############################################
urlview-0.9/configure-3987- cat >>confdefs.h <<_ACEOF
urlview-0.9/configure:3988:#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
urlview-0.9/configure-3989-_ACEOF
##############################################
urlview-0.9/configure-4336-'
urlview-0.9/configure:4337:DEFS=`sed -n "$ac_script" confdefs.h`
urlview-0.9/configure-4338-
##############################################
urlview-0.9/configure-4345- ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
urlview-0.9/configure:4346: ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
urlview-0.9/configure-4347- # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
##############################################
urlview-0.9/configure-4428-if test -z "$BASH_VERSION$ZSH_VERSION" \
urlview-0.9/configure:4429: && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
urlview-0.9/configure-4430- as_echo='print -r --'
urlview-0.9/configure-4431- as_echo_n='print -rn --'
urlview-0.9/configure:4432:elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
urlview-0.9/configure-4433- as_echo='printf %s\n'
##############################################
urlview-0.9/configure-4435-else
urlview-0.9/configure:4436: if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
urlview-0.9/configure-4437- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
##############################################
urlview-0.9/configure-4445- expr "X$arg" : "X\\(.*\\)$as_nl";
urlview-0.9/configure:4446: arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
urlview-0.9/configure-4447- esac;
##############################################
urlview-0.9/configure-4521-# ----------------------------------------
urlview-0.9/configure:4522:# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
urlview-0.9/configure-4523-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
##############################################
urlview-0.9/configure-4593- {
urlview-0.9/configure:4594: as_val=`expr "$@" || test $? -eq 1`
urlview-0.9/configure-4595- }
##############################################
urlview-0.9/configure-4697- case $as_dir in #(
urlview-0.9/configure:4698: *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
urlview-0.9/configure-4699- *) as_qdir=$as_dir;;
##############################################
urlview-0.9/configure-4754- esac;
urlview-0.9/configure:4755: case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
urlview-0.9/configure-4756- ???[sx]*):;;*)false;;esac;fi
##############################################
urlview-0.9/configure-4835-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
urlview-0.9/configure:4836:ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
urlview-0.9/configure-4837-ac_cs_version="\\
##############################################
urlview-0.9/configure-4860- --*=?*)
urlview-0.9/configure:4861: ac_option=`expr "X$1" : 'X\([^=]*\)='`
urlview-0.9/configure:4862: ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
urlview-0.9/configure-4863- ac_shift=:
##############################################
urlview-0.9/configure-4865- --*=)
urlview-0.9/configure:4866: ac_option=`expr "X$1" : 'X\([^=]*\)='`
urlview-0.9/configure-4867- ac_optarg=
##############################################
urlview-0.9/configure-4889- case $ac_optarg in
urlview-0.9/configure:4890: *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
urlview-0.9/configure-4891- '') as_fn_error $? "missing file argument" ;;
##############################################
urlview-0.9/configure-5010-fi
urlview-0.9/configure:5011:ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
urlview-0.9/configure-5012-if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
##############################################
urlview-0.9/configure-5027- as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
urlview-0.9/configure:5028:ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
urlview-0.9/configure-5029-ac_delim='%!_!# '
##############################################
urlview-0.9/configure-5033-
urlview-0.9/configure:5034: ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
urlview-0.9/configure-5035- if test $ac_delim_n = $ac_delim_num; then
##############################################
urlview-0.9/configure-5195- esac
urlview-0.9/configure:5196: case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
urlview-0.9/configure-5197- as_fn_append ac_file_inputs " '$ac_f'"
##############################################
urlview-0.9/configure-5254-*)
urlview-0.9/configure:5255: ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
urlview-0.9/configure-5256- # A ".." for each directory in $ac_dir_suffix.
urlview-0.9/configure:5257: ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
urlview-0.9/configure-5258- case $ac_top_builddir_sub in
##############################################
urlview-0.9/configure-5315-/@mandir@/p'
urlview-0.9/configure:5316:case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
urlview-0.9/configure-5317-*datarootdir*) ac_datarootdir_seen=yes;;
##############################################
urlview-0.9/configure-5332-
urlview-0.9/configure:5333:# Neutralize VPATH when `$srcdir' = `.'.
urlview-0.9/configure-5334-# Shell code in configure.ac might set extrasub.
##############################################
urlview-0.9/configure-5360-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
urlview-0.9/configure:5361: { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
urlview-0.9/configure:5362: { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
urlview-0.9/configure-5363- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
##############################################
urlview-0.9/configure-5395- # Strip MF so we end up with the name of the file.
urlview-0.9/configure:5396: mf=`echo "$mf" | sed -e 's/:.*$//'`
urlview-0.9/configure-5397- # Check whether this is an Automake generated Makefile or not.
##############################################
urlview-0.9/configure-5432- # from the Makefile without running `make'.
urlview-0.9/configure:5433: DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
urlview-0.9/configure-5434- test -z "$DEPDIR" && continue
urlview-0.9/configure:5435: am__include=`sed -n 's/^am__include = //p' < "$mf"`
urlview-0.9/configure-5436- test -z "am__include" && continue
urlview-0.9/configure:5437: am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
urlview-0.9/configure-5438- # When using ansi2knr, U may be empty or an underscore; expand it
urlview-0.9/configure:5439: U=`sed -n 's/^U = //p' < "$mf"`
urlview-0.9/configure-5440- # Find all dependency output files, they are included files with
##############################################
urlview-0.9/ltmain.sh-161- # Extract subdirectory from the argument.
urlview-0.9/ltmain.sh:162: func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
urlview-0.9/ltmain.sh-163- if test "X$func_dirname_result" = "X${1}"; then
##############################################
urlview-0.9/ltmain.sh-167- fi
urlview-0.9/ltmain.sh:168: func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
urlview-0.9/ltmain.sh-169-}
##############################################
urlview-0.9/ltmain.sh-193- progdir=$func_dirname_result
urlview-0.9/ltmain.sh:194: progdir=`cd "$progdir" && pwd`
urlview-0.9/ltmain.sh-195- progpath="$progdir/$progname"
##############################################
urlview-0.9/ltmain.sh-221-# Since each input `\' is now two `\'s, look for any number of runs of
urlview-0.9/ltmain.sh:222:# four `\'s followed by two `\'s and then a '$'. `\' that '$'.
urlview-0.9/ltmain.sh-223-bs='\\'
##############################################
urlview-0.9/ltmain.sh-328- # ...otherwise throw away the child directory and loop
urlview-0.9/ltmain.sh:329: my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"`
urlview-0.9/ltmain.sh-330- done
urlview-0.9/ltmain.sh:331: my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'`
urlview-0.9/ltmain.sh-332-
##############################################
urlview-0.9/ltmain.sh-363- # If mktemp works, use that first and foremost
urlview-0.9/ltmain.sh:364: my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
urlview-0.9/ltmain.sh-365-
##############################################
urlview-0.9/ltmain.sh-394- *[\\\`\"\$]*)
urlview-0.9/ltmain.sh:395: func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;;
urlview-0.9/ltmain.sh-396- *)
##############################################
urlview-0.9/ltmain.sh-536- s/\$with_gnu_ld/'"$with_gnu_ld"'/
urlview-0.9/ltmain.sh:537: s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/
urlview-0.9/ltmain.sh:538: s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
urlview-0.9/ltmain.sh-539- p
##############################################
urlview-0.9/ltmain.sh-565- :
urlview-0.9/ltmain.sh:566:elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
urlview-0.9/ltmain.sh-567- # Yippee, $ECHO works!
##############################################
urlview-0.9/ltmain.sh-685- # quotes we have to do it in 2 steps:
urlview-0.9/ltmain.sh:686: extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
urlview-0.9/ltmain.sh-687- eval "$extractedcf"
##############################################
urlview-0.9/ltmain.sh-1021- # but not from the CC environment variable when configure was run.
urlview-0.9/ltmain.sh:1022: " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;;
urlview-0.9/ltmain.sh-1023- # Blanks at the start of $base_compile will cause this to fail
##############################################
urlview-0.9/ltmain.sh-1028- # Evaluate the configuration.
urlview-0.9/ltmain.sh:1029: eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
urlview-0.9/ltmain.sh-1030- CC_quoted=
##############################################
urlview-0.9/ltmain.sh-1036- case "$@ " in
urlview-0.9/ltmain.sh:1037: " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*)
urlview-0.9/ltmain.sh-1038- # The compiler in the base compile command matches
##############################################
urlview-0.9/ltmain.sh-1213- *.[cCFSifmso] | \
urlview-0.9/ltmain.sh:1214: *.ada | *.adb | *.ads | *.asm | \
urlview-0.9/ltmain.sh-1215- *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
##############################################
urlview-0.9/ltmain.sh-1290- if test "$compiler_c_o" = no; then
urlview-0.9/ltmain.sh:1291: output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
urlview-0.9/ltmain.sh-1292- lockfile="$output_obj.lock"
##############################################
urlview-0.9/ltmain.sh-1309-*** ERROR, $lockfile exists and contains:
urlview-0.9/ltmain.sh:1310:`cat $lockfile 2>/dev/null`
urlview-0.9/ltmain.sh-1311-
##############################################
urlview-0.9/ltmain.sh-1358- if test "$need_locks" = warn &&
urlview-0.9/ltmain.sh:1359: test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
urlview-0.9/ltmain.sh-1360- $ECHO "\
urlview-0.9/ltmain.sh-1361-*** ERROR, $lockfile contains:
urlview-0.9/ltmain.sh:1362:`cat $lockfile 2>/dev/null`
urlview-0.9/ltmain.sh-1363-
##############################################
urlview-0.9/ltmain.sh-1407- if test "$need_locks" = warn &&
urlview-0.9/ltmain.sh:1408: test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
urlview-0.9/ltmain.sh-1409- $ECHO "\
urlview-0.9/ltmain.sh-1410-*** ERROR, $lockfile contains:
urlview-0.9/ltmain.sh:1411:`cat $lockfile 2>/dev/null`
urlview-0.9/ltmain.sh-1412-
##############################################
urlview-0.9/ltmain.sh-1665- test -n "$library_names" && \
urlview-0.9/ltmain.sh:1666: func_warning "\`$file' was not linked with \`-export-dynamic'"
urlview-0.9/ltmain.sh-1667- continue
##############################################
urlview-0.9/ltmain.sh-1676- if test ! -f "$dir/$dlname"; then
urlview-0.9/ltmain.sh:1677: func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
urlview-0.9/ltmain.sh-1678- fi
##############################################
urlview-0.9/ltmain.sh-1694- # Get the absolute pathname.
urlview-0.9/ltmain.sh:1695: absdir=`cd "$dir" && pwd`
urlview-0.9/ltmain.sh-1696- test -n "$absdir" && dir="$absdir"
##############################################
urlview-0.9/ltmain.sh-2012- # Determine the prefix the user has applied to our future dir.
urlview-0.9/ltmain.sh:2013: inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"`
urlview-0.9/ltmain.sh-2014-
##############################################
urlview-0.9/ltmain.sh-2025- # Stick the inst_prefix_dir data into the link command.
urlview-0.9/ltmain.sh:2026: relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
urlview-0.9/ltmain.sh-2027- else
urlview-0.9/ltmain.sh:2028: relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"`
urlview-0.9/ltmain.sh-2029- fi
##############################################
urlview-0.9/ltmain.sh-2185- fi
urlview-0.9/ltmain.sh:2186: libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
urlview-0.9/ltmain.sh-2187- if test -n "$libdir" && test ! -f "$libfile"; then
urlview-0.9/ltmain.sh:2188: func_warning "\`$lib' has not been installed in \`$libdir'"
urlview-0.9/ltmain.sh-2189- finalize=no
##############################################
urlview-0.9/ltmain.sh-2204- # Replace the output file specification.
urlview-0.9/ltmain.sh:2205: relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
urlview-0.9/ltmain.sh-2206-
##############################################
urlview-0.9/ltmain.sh-2223- # Install the binary that we compiled earlier.
urlview-0.9/ltmain.sh:2224: file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
urlview-0.9/ltmain.sh-2225- fi
##############################################
urlview-0.9/ltmain.sh-2294- my_pic_p="${3-no}"
urlview-0.9/ltmain.sh:2295: my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
urlview-0.9/ltmain.sh-2296- my_dlsyms=
##############################################
urlview-0.9/ltmain.sh-2334- # Add our own program objects to the symbol list.
urlview-0.9/ltmain.sh:2335: progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
urlview-0.9/ltmain.sh-2336- for progfile in $progfiles; do
##############################################
urlview-0.9/ltmain.sh-2517- if test -f "$output_objdir/$my_outputname.def"; then
urlview-0.9/ltmain.sh:2518: compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
urlview-0.9/ltmain.sh:2519: finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
urlview-0.9/ltmain.sh-2520- else
urlview-0.9/ltmain.sh:2521: compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
urlview-0.9/ltmain.sh:2522: finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
urlview-0.9/ltmain.sh-2523- fi
##############################################
urlview-0.9/ltmain.sh-2525- *)
urlview-0.9/ltmain.sh:2526: compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
urlview-0.9/ltmain.sh:2527: finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
urlview-0.9/ltmain.sh-2528- ;;
##############################################
urlview-0.9/ltmain.sh-2540- # Nullify the symbol file.
urlview-0.9/ltmain.sh:2541: compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
urlview-0.9/ltmain.sh:2542: finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
urlview-0.9/ltmain.sh-2543- fi
##############################################
urlview-0.9/ltmain.sh-2555- win32_libid_type="unknown"
urlview-0.9/ltmain.sh:2556: win32_fileres=`file -L $1 2>/dev/null`
urlview-0.9/ltmain.sh-2557- case $win32_fileres in
##############################################
urlview-0.9/ltmain.sh-2652- darwin_curdir=`pwd`
urlview-0.9/ltmain.sh:2653: darwin_base_archive=`basename "$darwin_archive"`
urlview-0.9/ltmain.sh:2654: darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
urlview-0.9/ltmain.sh-2655- if test -n "$darwin_arches"; then
urlview-0.9/ltmain.sh:2656: darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
urlview-0.9/ltmain.sh-2657- darwin_arch=
##############################################
urlview-0.9/ltmain.sh-2667- ## Okay now we've a bunch of thin objects, gotta fatten them up :)
urlview-0.9/ltmain.sh:2668: darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
urlview-0.9/ltmain.sh-2669- darwin_file=
##############################################
urlview-0.9/ltmain.sh-2671- for darwin_file in $darwin_filelist; do
urlview-0.9/ltmain.sh:2672: darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
urlview-0.9/ltmain.sh-2673- $LIPO -create -output "$darwin_file" $darwin_files
##############################################
urlview-0.9/ltmain.sh-2686- esac
urlview-0.9/ltmain.sh:2687: my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
urlview-0.9/ltmain.sh-2688- done
##############################################
urlview-0.9/ltmain.sh-2757- shift
urlview-0.9/ltmain.sh:2758: elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then
urlview-0.9/ltmain.sh-2759- # Yippee, \$ECHO works!
##############################################
urlview-0.9/ltmain.sh-2769- # Find the directory that this script lives in.
urlview-0.9/ltmain.sh:2770: thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
urlview-0.9/ltmain.sh-2771- test \"x\$thisdir\" = \"x\$file\" && thisdir=.
##############################################
urlview-0.9/ltmain.sh-2773- # Follow symbolic links until we get to the real thisdir.
urlview-0.9/ltmain.sh:2774: file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
urlview-0.9/ltmain.sh-2775- while test -n \"\$file\"; do
urlview-0.9/ltmain.sh:2776: destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
urlview-0.9/ltmain.sh-2777-
##############################################
urlview-0.9/ltmain.sh-2785-
urlview-0.9/ltmain.sh:2786: file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
urlview-0.9/ltmain.sh:2787: file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
urlview-0.9/ltmain.sh-2788- done
##############################################
urlview-0.9/ltmain.sh-2816- case \"\$thisdir\" in
urlview-0.9/ltmain.sh:2817: *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;;
urlview-0.9/ltmain.sh-2818- $objdir ) thisdir=. ;;
##############################################
urlview-0.9/ltmain.sh-2822- # Try to get the absolute directory name.
urlview-0.9/ltmain.sh:2823: absdir=\`cd \"\$thisdir\" && pwd\`
urlview-0.9/ltmain.sh-2824- test -n \"\$absdir\" && thisdir=\"\$absdir\"
##############################################
urlview-0.9/ltmain.sh-2832- if test ! -f \"\$progdir/\$program\" ||
urlview-0.9/ltmain.sh:2833: { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
urlview-0.9/ltmain.sh-2834- test \"X\$file\" != \"X\$progdir/\$program\"; }; then
##############################################
urlview-0.9/ltmain.sh-2847- if test -n \"\$relink_command\"; then
urlview-0.9/ltmain.sh:2848: if relink_command_output=\`eval \$relink_command 2>&1\`; then :
urlview-0.9/ltmain.sh-2849- else
##############################################
urlview-0.9/ltmain.sh-2879- # The second colon is a workaround for a bug in BeOS R4 sed
urlview-0.9/ltmain.sh:2880: $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
urlview-0.9/ltmain.sh-2881-
##############################################
urlview-0.9/ltmain.sh-2994- *cygwin* )
urlview-0.9/ltmain.sh:2995: func_to_host_path_tmp1=`cygpath -w "$1"`
urlview-0.9/ltmain.sh-2996- func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
##############################################
urlview-0.9/ltmain.sh-3006- # the odd construction:
urlview-0.9/ltmain.sh:3007: func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null`
urlview-0.9/ltmain.sh-3008- if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then
##############################################
urlview-0.9/ltmain.sh-3073- *cygwin* )
urlview-0.9/ltmain.sh:3074: func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"`
urlview-0.9/ltmain.sh-3075- func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
##############################################
urlview-0.9/ltmain.sh-4240- moreargs=
urlview-0.9/ltmain.sh:4241: for fil in `cat "$save_arg"`
urlview-0.9/ltmain.sh-4242- do
##############################################
urlview-0.9/ltmain.sh-4490- *)
urlview-0.9/ltmain.sh:4491: absdir=`cd "$dir" && pwd`
urlview-0.9/ltmain.sh-4492- test -z "$absdir" && \
##############################################
urlview-0.9/ltmain.sh-4505- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
urlview-0.9/ltmain.sh:4506: testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'`
urlview-0.9/ltmain.sh-4507- case :$dllsearchpath: in
##############################################
urlview-0.9/ltmain.sh-4927- # get the directories listed in $shlibpath_var
urlview-0.9/ltmain.sh:4928: eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
urlview-0.9/ltmain.sh-4929- else
##############################################
urlview-0.9/ltmain.sh-5053- for deplib in $dependency_libs; do
urlview-0.9/ltmain.sh:5054: deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"`
urlview-0.9/ltmain.sh-5055- case " $weak_libs " in
##############################################
urlview-0.9/ltmain.sh-5231- set dummy $deplibs_check_method; shift
urlview-0.9/ltmain.sh:5232: match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
urlview-0.9/ltmain.sh-5233- if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \
##############################################
urlview-0.9/ltmain.sh-5294- else
urlview-0.9/ltmain.sh:5295: func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
urlview-0.9/ltmain.sh-5296- fi
##############################################
urlview-0.9/ltmain.sh-5323- if test -n "$inherited_linker_flags"; then
urlview-0.9/ltmain.sh:5324: tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'`
urlview-0.9/ltmain.sh-5325- for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
##############################################
urlview-0.9/ltmain.sh-5331- fi
urlview-0.9/ltmain.sh:5332: dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
urlview-0.9/ltmain.sh-5333- if test "$linkmode,$pass" = "lib,link" ||
##############################################
urlview-0.9/ltmain.sh-5398- *)
urlview-0.9/ltmain.sh:5399: abs_ladir=`cd "$ladir" && pwd`
urlview-0.9/ltmain.sh-5400- if test -z "$abs_ladir"; then
##############################################
urlview-0.9/ltmain.sh-5624- shift
urlview-0.9/ltmain.sh:5625: libname=`eval "\\$ECHO \"$libname_spec\""`
urlview-0.9/ltmain.sh-5626- # use dlname if we got it. it's perfectly good, no?
##############################################
urlview-0.9/ltmain.sh-5908- *)
urlview-0.9/ltmain.sh:5909: absdir=`cd "$dir" && pwd`
urlview-0.9/ltmain.sh-5910- if test -z "$absdir"; then
##############################################
urlview-0.9/ltmain.sh-5919- depdepl=
urlview-0.9/ltmain.sh:5920: eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
urlview-0.9/ltmain.sh-5921- if test -n "$deplibrary_names" ; then
##############################################
urlview-0.9/ltmain.sh-5926- depdepl="$absdir/$objdir/$depdepl"
urlview-0.9/ltmain.sh:5927: darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
urlview-0.9/ltmain.sh-5928- if test -z "$darwin_install_name"; then
urlview-0.9/ltmain.sh:5929: darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
urlview-0.9/ltmain.sh-5930- fi
##############################################
urlview-0.9/ltmain.sh-5941- else
urlview-0.9/ltmain.sh:5942: eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
urlview-0.9/ltmain.sh-5943- test -z "$libdir" && \
##############################################
urlview-0.9/ltmain.sh-5964- else
urlview-0.9/ltmain.sh:5965: compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
urlview-0.9/ltmain.sh-5966- fi
##############################################
urlview-0.9/ltmain.sh-6113- test "$module" = no && \
urlview-0.9/ltmain.sh:6114: func_fatal_help "libtool library \`$output' must begin with \`lib'"
urlview-0.9/ltmain.sh-6115-
##############################################
urlview-0.9/ltmain.sh-6250- if test "$age" -gt "$current"; then
urlview-0.9/ltmain.sh:6251: func_error "AGE \`$age' is greater than the current interface number \`$current'"
urlview-0.9/ltmain.sh-6252- func_fatal_error "\`$vinfo' is not valid version information"
##############################################
urlview-0.9/ltmain.sh-6411- removelist=
urlview-0.9/ltmain.sh:6412: tempremovelist=`$ECHO "$output_objdir/*"`
urlview-0.9/ltmain.sh-6413- for p in $tempremovelist; do
##############################################
urlview-0.9/ltmain.sh-6437- # Transform .lo files to .o files.
urlview-0.9/ltmain.sh:6438: oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
urlview-0.9/ltmain.sh-6439- fi
##############################################
urlview-0.9/ltmain.sh-6442- #for path in $notinst_path; do
urlview-0.9/ltmain.sh:6443: # lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"`
urlview-0.9/ltmain.sh:6444: # deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"`
urlview-0.9/ltmain.sh:6445: # dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"`
urlview-0.9/ltmain.sh-6446- #done
##############################################
urlview-0.9/ltmain.sh-6562- if test -n "$i" ; then
urlview-0.9/ltmain.sh:6563: libname=`eval "\\$ECHO \"$libname_spec\""`
urlview-0.9/ltmain.sh:6564: deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
urlview-0.9/ltmain.sh-6565- set dummy $deplib_matches; shift
urlview-0.9/ltmain.sh-6566- deplib_match=$1
urlview-0.9/ltmain.sh:6567: if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
urlview-0.9/ltmain.sh-6568- newdeplibs="$newdeplibs $i"
##############################################
urlview-0.9/ltmain.sh-6605- if test -n "$i" ; then
urlview-0.9/ltmain.sh:6606: libname=`eval "\\$ECHO \"$libname_spec\""`
urlview-0.9/ltmain.sh:6607: deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
urlview-0.9/ltmain.sh-6608- set dummy $deplib_matches; shift
urlview-0.9/ltmain.sh-6609- deplib_match=$1
urlview-0.9/ltmain.sh:6610: if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
urlview-0.9/ltmain.sh-6611- newdeplibs="$newdeplibs $i"
##############################################
urlview-0.9/ltmain.sh-6640- set dummy $deplibs_check_method; shift
urlview-0.9/ltmain.sh:6641: file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
urlview-0.9/ltmain.sh-6642- for a_deplib in $deplibs; do
##############################################
urlview-0.9/ltmain.sh-6655- if test -n "$a_deplib" ; then
urlview-0.9/ltmain.sh:6656: libname=`eval "\\$ECHO \"$libname_spec\""`
urlview-0.9/ltmain.sh-6657- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
urlview-0.9/ltmain.sh:6658: potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
urlview-0.9/ltmain.sh-6659- for potent_lib in $potential_libs; do
##############################################
urlview-0.9/ltmain.sh-6671- while test -h "$potlib" 2>/dev/null; do
urlview-0.9/ltmain.sh:6672: potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
urlview-0.9/ltmain.sh-6673- case $potliblink in
urlview-0.9/ltmain.sh-6674- [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
urlview-0.9/ltmain.sh:6675: *) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
urlview-0.9/ltmain.sh-6676- esac
##############################################
urlview-0.9/ltmain.sh-6712- set dummy $deplibs_check_method; shift
urlview-0.9/ltmain.sh:6713: match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
urlview-0.9/ltmain.sh-6714- for a_deplib in $deplibs; do
##############################################
urlview-0.9/ltmain.sh-6727- if test -n "$a_deplib" ; then
urlview-0.9/ltmain.sh:6728: libname=`eval "\\$ECHO \"$libname_spec\""`
urlview-0.9/ltmain.sh-6729- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
urlview-0.9/ltmain.sh:6730: potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
urlview-0.9/ltmain.sh-6731- for potent_lib in $potential_libs; do
##############################################
urlview-0.9/ltmain.sh-6771- # can't use Xsed below, because $i might contain '/'
urlview-0.9/ltmain.sh:6772: tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"`
urlview-0.9/ltmain.sh-6773- done
##############################################
urlview-0.9/ltmain.sh-6796- # On Rhapsody replace the C library with the System framework
urlview-0.9/ltmain.sh:6797: newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
urlview-0.9/ltmain.sh-6798- ;;
##############################################
urlview-0.9/ltmain.sh-6848- *-*-darwin*)
urlview-0.9/ltmain.sh:6849: newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
urlview-0.9/ltmain.sh:6850: new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
urlview-0.9/ltmain.sh:6851: deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
urlview-0.9/ltmain.sh-6852- ;;
##############################################
urlview-0.9/ltmain.sh-6972- # Use standard objects if they are pic
urlview-0.9/ltmain.sh:6973: test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
urlview-0.9/ltmain.sh-6974- test "X$libobjs" = "X " && libobjs=
##############################################
urlview-0.9/ltmain.sh-6987- # exporting using user supplied symfile
urlview-0.9/ltmain.sh:6988: if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
urlview-0.9/ltmain.sh-6989- # and it's NOT already a .def file. Must figure out
##############################################
urlview-0.9/ltmain.sh-7139- save_output=$output
urlview-0.9/ltmain.sh:7140: output_la=`$ECHO "X$output" | $Xsed -e "$basename"`
urlview-0.9/ltmain.sh-7141-
##############################################
urlview-0.9/ltmain.sh-7443- eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
urlview-0.9/ltmain.sh:7444: reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
urlview-0.9/ltmain.sh-7445- else
##############################################
urlview-0.9/ltmain.sh-7454- # Create the old-style object.
urlview-0.9/ltmain.sh:7455: reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
urlview-0.9/ltmain.sh-7456-
##############################################
urlview-0.9/ltmain.sh-7514- # On Rhapsody replace the C library is the System framework
urlview-0.9/ltmain.sh:7515: compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
urlview-0.9/ltmain.sh:7516: finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
urlview-0.9/ltmain.sh-7517- ;;
##############################################
urlview-0.9/ltmain.sh-7532- # Time to change all our "foo.ltframework" stuff back to "-framework foo"
urlview-0.9/ltmain.sh:7533: compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
urlview-0.9/ltmain.sh:7534: finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
urlview-0.9/ltmain.sh-7535- ;;
##############################################
urlview-0.9/ltmain.sh-7610- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
urlview-0.9/ltmain.sh:7611: testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
urlview-0.9/ltmain.sh-7612- case :$dllsearchpath: in
##############################################
urlview-0.9/ltmain.sh-7670- # Transform all the library objects into standard objects.
urlview-0.9/ltmain.sh:7671: compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
urlview-0.9/ltmain.sh:7672: finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
urlview-0.9/ltmain.sh-7673- fi
##############################################
urlview-0.9/ltmain.sh-7700- # Replace the output file specification.
urlview-0.9/ltmain.sh:7701: compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
urlview-0.9/ltmain.sh-7702- link_command="$compile_command$compile_rpath"
##############################################
urlview-0.9/ltmain.sh-7747- # Replace the output file specification.
urlview-0.9/ltmain.sh:7748: link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
urlview-0.9/ltmain.sh-7749- # Delete the old output file.
##############################################
urlview-0.9/ltmain.sh-7766- if test "$fast_install" = yes; then
urlview-0.9/ltmain.sh:7767: relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
urlview-0.9/ltmain.sh-7768- else
##############################################
urlview-0.9/ltmain.sh-7778- # Replace the output file specification.
urlview-0.9/ltmain.sh:7779: link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
urlview-0.9/ltmain.sh-7780-
##############################################
urlview-0.9/ltmain.sh-7802- relink_command="(cd `pwd`; $relink_command)"
urlview-0.9/ltmain.sh:7803: relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
urlview-0.9/ltmain.sh-7804- fi
##############################################
urlview-0.9/ltmain.sh-7811- esac
urlview-0.9/ltmain.sh:7812: qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"`
urlview-0.9/ltmain.sh-7813- else
urlview-0.9/ltmain.sh:7814: qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"`
urlview-0.9/ltmain.sh-7815- fi
##############################################
urlview-0.9/ltmain.sh-8045- relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
urlview-0.9/ltmain.sh:8046: relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
urlview-0.9/ltmain.sh-8047- if test "$hardcode_automatic" = yes ; then
##############################################
urlview-0.9/ltmain.sh-8065- name="$func_basename_result"
urlview-0.9/ltmain.sh:8066: eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
urlview-0.9/ltmain.sh-8067- test -z "$libdir" && \
##############################################
urlview-0.9/ltmain.sh-8081- name="$func_basename_result"
urlview-0.9/ltmain.sh:8082: eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
urlview-0.9/ltmain.sh-8083- test -z "$libdir" && \
##############################################
urlview-0.9/ltmain.sh-8100- name="$func_basename_result"
urlview-0.9/ltmain.sh:8101: eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
urlview-0.9/ltmain.sh-8102- test -z "$libdir" && \
##############################################
urlview-0.9/ltmain.sh-8404-# ### BEGIN LIBTOOL TAG CONFIG: disable-static
urlview-0.9/ltmain.sh:8405:build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
urlview-0.9/ltmain.sh-8406-# ### END LIBTOOL TAG CONFIG: disable-static