=========================================================== .___ __ __ _________________ __ __ __| _/|__|/ |_ / ___\_` __ \__ \ | | \/ __ | | \\_ __\ / /_/ > | \// __ \| | / /_/ | | || | \___ /|__| (____ /____/\____ | |__||__| /_____/ \/ \/ grep rough audit - static analysis tool v2.8 written by @Wireghoul =================================[justanotherhacker.com]=== zomg-0.8.1/configure-43-if test -z "$BASH_VERSION$ZSH_VERSION" \ zomg-0.8.1/configure:44: && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then zomg-0.8.1/configure-45- as_echo='print -r --' zomg-0.8.1/configure-46- as_echo_n='print -rn --' zomg-0.8.1/configure:47:elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then zomg-0.8.1/configure-48- as_echo='printf %s\n' ############################################## zomg-0.8.1/configure-50-else zomg-0.8.1/configure:51: if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then zomg-0.8.1/configure-52- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' ############################################## zomg-0.8.1/configure-60- expr "X$arg" : "X\\(.*\\)$as_nl"; zomg-0.8.1/configure:61: arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; zomg-0.8.1/configure-62- esac; ############################################## zomg-0.8.1/configure-197- eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && zomg-0.8.1/configure:198: test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1" zomg-0.8.1/configure-199- if (eval "$as_required") 2>/dev/null; then : ############################################## zomg-0.8.1/configure-323- case $as_dir in #( zomg-0.8.1/configure:324: *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( zomg-0.8.1/configure-325- *) as_qdir=$as_dir;; ############################################## zomg-0.8.1/configure-396- { zomg-0.8.1/configure:397: as_val=`expr "$@" || test $? -eq 1` zomg-0.8.1/configure-398- } ############################################## zomg-0.8.1/configure-403-# ---------------------------------------- zomg-0.8.1/configure:404:# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are zomg-0.8.1/configure-405-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the ############################################## zomg-0.8.1/configure-466- eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && zomg-0.8.1/configure:467: test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { zomg-0.8.1/configure-468- # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) ############################################## zomg-0.8.1/configure-766- case $ac_option in zomg-0.8.1/configure:767: *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; zomg-0.8.1/configure-768- *=) ac_optarg= ;; ############################################## zomg-0.8.1/configure-810- -disable-* | --disable-*) zomg-0.8.1/configure:811: ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` zomg-0.8.1/configure-812- # Reject names that are not valid shell variable names. ############################################## zomg-0.8.1/configure-815- ac_useropt_orig=$ac_useropt zomg-0.8.1/configure:816: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` zomg-0.8.1/configure-817- case $ac_user_opts in ############################################## zomg-0.8.1/configure-836- -enable-* | --enable-*) zomg-0.8.1/configure:837: ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` zomg-0.8.1/configure-838- # Reject names that are not valid shell variable names. ############################################## zomg-0.8.1/configure-841- ac_useropt_orig=$ac_useropt zomg-0.8.1/configure:842: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` zomg-0.8.1/configure-843- case $ac_user_opts in ############################################## zomg-0.8.1/configure-1049- -with-* | --with-*) zomg-0.8.1/configure:1050: ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` zomg-0.8.1/configure-1051- # Reject names that are not valid shell variable names. ############################################## zomg-0.8.1/configure-1054- ac_useropt_orig=$ac_useropt zomg-0.8.1/configure:1055: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` zomg-0.8.1/configure-1056- case $ac_user_opts in ############################################## zomg-0.8.1/configure-1065- -without-* | --without-*) zomg-0.8.1/configure:1066: ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` zomg-0.8.1/configure-1067- # Reject names that are not valid shell variable names. ############################################## zomg-0.8.1/configure-1070- ac_useropt_orig=$ac_useropt zomg-0.8.1/configure:1071: ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` zomg-0.8.1/configure-1072- case $ac_user_opts in ############################################## zomg-0.8.1/configure-1103- *=*) zomg-0.8.1/configure:1104: ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` zomg-0.8.1/configure-1105- # Reject names that are not valid shell variable names. ############################################## zomg-0.8.1/configure-1124-if test -n "$ac_prev"; then zomg-0.8.1/configure:1125: ac_option=--`echo $ac_prev | sed 's/_/-/g'` zomg-0.8.1/configure-1126- as_fn_error $? "missing argument to $ac_option" ############################################## zomg-0.8.1/configure-1146- */ ) zomg-0.8.1/configure:1147: ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` zomg-0.8.1/configure-1148- eval $ac_var=\$ac_val;; ############################################## zomg-0.8.1/configure-1181-ac_ls_di=`ls -di .` && zomg-0.8.1/configure:1182:ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || zomg-0.8.1/configure-1183- as_fn_error $? "working directory cannot be determined" ############################################## zomg-0.8.1/configure-1237-case $srcdir in zomg-0.8.1/configure:1238:*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; zomg-0.8.1/configure-1239-esac ############################################## zomg-0.8.1/configure-1280-By default, \`make install' will install all the files in zomg-0.8.1/configure:1281:\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify zomg-0.8.1/configure:1282:an installation prefix other than \`$ac_default_prefix' using \`--prefix', zomg-0.8.1/configure-1283-for instance \`--prefix=\$HOME'. ############################################## zomg-0.8.1/configure-1379-*) zomg-0.8.1/configure:1380: ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` zomg-0.8.1/configure-1381- # A ".." for each directory in $ac_dir_suffix. zomg-0.8.1/configure:1382: ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` zomg-0.8.1/configure-1383- case $ac_top_builddir_sub in ############################################## zomg-0.8.1/configure-1599- *\'*) zomg-0.8.1/configure:1600: ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; zomg-0.8.1/configure-1601- esac ############################################## zomg-0.8.1/configure-1682- case $ac_val in zomg-0.8.1/configure:1683: *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; zomg-0.8.1/configure-1684- esac ############################################## zomg-0.8.1/configure-1697- case $ac_val in zomg-0.8.1/configure:1698: *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; zomg-0.8.1/configure-1699- esac ############################################## zomg-0.8.1/configure-1817- set,) zomg-0.8.1/configure:1818: { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 zomg-0.8.1/configure:1819:$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} zomg-0.8.1/configure-1820- ac_cache_corrupted=: ;; ############################################## zomg-0.8.1/configure-1828- # differences in whitespace do not lead to failure. zomg-0.8.1/configure:1829: ac_old_val_w=`echo x $ac_old_val` zomg-0.8.1/configure:1830: ac_new_val_w=`echo x $ac_new_val` zomg-0.8.1/configure-1831- if test "$ac_old_val_w" != "$ac_new_val_w"; then ############################################## zomg-0.8.1/configure-1848- case $ac_new_val in zomg-0.8.1/configure:1849: *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; zomg-0.8.1/configure-1850- *) ac_arg=$ac_var=$ac_new_val ;; ############################################## zomg-0.8.1/configure-2023- echo "timestamp, slept: $am_has_slept" > conftest.file zomg-0.8.1/configure:2024: set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` zomg-0.8.1/configure-2025- if test "$*" = "X"; then zomg-0.8.1/configure-2026- # -L didn't work. zomg-0.8.1/configure:2027: set X `ls -t "$srcdir/configure" conftest.file` zomg-0.8.1/configure-2028- fi ############################################## zomg-0.8.1/configure-2074-ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' zomg-0.8.1/configure:2075:program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` zomg-0.8.1/configure-2076- zomg-0.8.1/configure-2077-# Expand $ac_aux_dir to an absolute path. zomg-0.8.1/configure:2078:am_aux_dir=`cd "$ac_aux_dir" && pwd` zomg-0.8.1/configure-2079- ############################################## zomg-0.8.1/configure-2219- as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue zomg-0.8.1/configure:2220: case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( zomg-0.8.1/configure-2221- 'mkdir (GNU coreutils) '* | \ ############################################## zomg-0.8.1/configure-2292-set x ${MAKE-make} zomg-0.8.1/configure:2293:ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` zomg-0.8.1/configure-2294-if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : ############################################## zomg-0.8.1/configure-2302-# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. zomg-0.8.1/configure:2303:case `${MAKE-make} -f conftest.make 2>/dev/null` in zomg-0.8.1/configure-2304- *@@@%%%=?*=@@@%%%*) ############################################## zomg-0.8.1/configure-2368- zomg-0.8.1/configure:2369:if test "`cd $srcdir && pwd`" != "`pwd`"; then zomg-0.8.1/configure-2370- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output ############################################## zomg-0.8.1/configure-2830-$as_echo_n "checking whether the C compiler works... " >&6; } zomg-0.8.1/configure:2831:ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` zomg-0.8.1/configure-2832- ############################################## zomg-0.8.1/configure-2874- then :; else zomg-0.8.1/configure:2875: ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` zomg-0.8.1/configure-2876- fi ############################################## zomg-0.8.1/configure-2934- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; zomg-0.8.1/configure:2935: *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` zomg-0.8.1/configure-2936- break;; ############################################## zomg-0.8.1/configure-3043- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; zomg-0.8.1/configure:3044: *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` zomg-0.8.1/configure-3045- break;; ############################################## zomg-0.8.1/configure-3424- if test "$am_compiler_list" = ""; then zomg-0.8.1/configure:3425: am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` zomg-0.8.1/configure-3426- fi ############################################## zomg-0.8.1/configure-3747- test $ac_status = 0; }; then zomg-0.8.1/configure:3748: pkg_cv_libxml_CFLAGS=`$PKG_CONFIG --cflags "libxml-2.0" 2>/dev/null` zomg-0.8.1/configure-3749- test "x$?" != "x0" && pkg_failed=yes ############################################## zomg-0.8.1/configure-3764- test $ac_status = 0; }; then zomg-0.8.1/configure:3765: pkg_cv_libxml_LIBS=`$PKG_CONFIG --libs "libxml-2.0" 2>/dev/null` zomg-0.8.1/configure-3766- test "x$?" != "x0" && pkg_failed=yes ############################################## zomg-0.8.1/configure-3785- if test $_pkg_short_errors_supported = yes; then zomg-0.8.1/configure:3786: libxml_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libxml-2.0" 2>&1` zomg-0.8.1/configure-3787- else zomg-0.8.1/configure:3788: libxml_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libxml-2.0" 2>&1` zomg-0.8.1/configure-3789- fi ############################################## zomg-0.8.1/configure-3838- test $ac_status = 0; }; then zomg-0.8.1/configure:3839: pkg_cv_opusfile_CFLAGS=`$PKG_CONFIG --cflags "opusfile" 2>/dev/null` zomg-0.8.1/configure-3840- test "x$?" != "x0" && pkg_failed=yes ############################################## zomg-0.8.1/configure-3855- test $ac_status = 0; }; then zomg-0.8.1/configure:3856: pkg_cv_opusfile_LIBS=`$PKG_CONFIG --libs "opusfile" 2>/dev/null` zomg-0.8.1/configure-3857- test "x$?" != "x0" && pkg_failed=yes ############################################## zomg-0.8.1/configure-3876- if test $_pkg_short_errors_supported = yes; then zomg-0.8.1/configure:3877: opusfile_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "opusfile" 2>&1` zomg-0.8.1/configure-3878- else zomg-0.8.1/configure:3879: opusfile_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "opusfile" 2>&1` zomg-0.8.1/configure-3880- fi ############################################## zomg-0.8.1/configure-3929- test $ac_status = 0; }; then zomg-0.8.1/configure:3930: pkg_cv_vorbisfile_CFLAGS=`$PKG_CONFIG --cflags "vorbisfile" 2>/dev/null` zomg-0.8.1/configure-3931- test "x$?" != "x0" && pkg_failed=yes ############################################## zomg-0.8.1/configure-3946- test $ac_status = 0; }; then zomg-0.8.1/configure:3947: pkg_cv_vorbisfile_LIBS=`$PKG_CONFIG --libs "vorbisfile" 2>/dev/null` zomg-0.8.1/configure-3948- test "x$?" != "x0" && pkg_failed=yes ############################################## zomg-0.8.1/configure-3967- if test $_pkg_short_errors_supported = yes; then zomg-0.8.1/configure:3968: vorbisfile_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "vorbisfile" 2>&1` zomg-0.8.1/configure-3969- else zomg-0.8.1/configure:3970: vorbisfile_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "vorbisfile" 2>&1` zomg-0.8.1/configure-3971- fi ############################################## zomg-0.8.1/configure-4134-' zomg-0.8.1/configure:4135:DEFS=`sed -n "$ac_script" confdefs.h` zomg-0.8.1/configure-4136- ############################################## zomg-0.8.1/configure-4143- ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' zomg-0.8.1/configure:4144: ac_i=`$as_echo "$ac_i" | sed "$ac_script"` zomg-0.8.1/configure-4145- # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR ############################################## zomg-0.8.1/configure-4234-if test -z "$BASH_VERSION$ZSH_VERSION" \ zomg-0.8.1/configure:4235: && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then zomg-0.8.1/configure-4236- as_echo='print -r --' zomg-0.8.1/configure-4237- as_echo_n='print -rn --' zomg-0.8.1/configure:4238:elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then zomg-0.8.1/configure-4239- as_echo='printf %s\n' ############################################## zomg-0.8.1/configure-4241-else zomg-0.8.1/configure:4242: if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then zomg-0.8.1/configure-4243- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' ############################################## zomg-0.8.1/configure-4251- expr "X$arg" : "X\\(.*\\)$as_nl"; zomg-0.8.1/configure:4252: arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; zomg-0.8.1/configure-4253- esac; ############################################## zomg-0.8.1/configure-4328-# ---------------------------------------- zomg-0.8.1/configure:4329:# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are zomg-0.8.1/configure-4330-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the ############################################## zomg-0.8.1/configure-4400- { zomg-0.8.1/configure:4401: as_val=`expr "$@" || test $? -eq 1` zomg-0.8.1/configure-4402- } ############################################## zomg-0.8.1/configure-4504- case $as_dir in #( zomg-0.8.1/configure:4505: *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( zomg-0.8.1/configure-4506- *) as_qdir=$as_dir;; ############################################## zomg-0.8.1/configure-4630-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 zomg-0.8.1/configure:4631:ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" zomg-0.8.1/configure-4632-ac_cs_version="\\ ############################################## zomg-0.8.1/configure-4655- --*=?*) zomg-0.8.1/configure:4656: ac_option=`expr "X$1" : 'X\([^=]*\)='` zomg-0.8.1/configure:4657: ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` zomg-0.8.1/configure-4658- ac_shift=: ############################################## zomg-0.8.1/configure-4660- --*=) zomg-0.8.1/configure:4661: ac_option=`expr "X$1" : 'X\([^=]*\)='` zomg-0.8.1/configure-4662- ac_optarg= ############################################## zomg-0.8.1/configure-4684- case $ac_optarg in zomg-0.8.1/configure:4685: *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; zomg-0.8.1/configure-4686- '') as_fn_error $? "missing file argument" ;; ############################################## zomg-0.8.1/configure-4807-fi zomg-0.8.1/configure:4808:ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null` zomg-0.8.1/configure-4809-if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then ############################################## zomg-0.8.1/configure-4824- as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 zomg-0.8.1/configure:4825:ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` zomg-0.8.1/configure-4826-ac_delim='%!_!# ' ############################################## zomg-0.8.1/configure-4830- zomg-0.8.1/configure:4831: ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` zomg-0.8.1/configure-4832- if test $ac_delim_n = $ac_delim_num; then ############################################## zomg-0.8.1/configure-4992- esac zomg-0.8.1/configure:4993: case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac zomg-0.8.1/configure-4994- as_fn_append ac_file_inputs " '$ac_f'" ############################################## zomg-0.8.1/configure-5051-*) zomg-0.8.1/configure:5052: ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` zomg-0.8.1/configure-5053- # A ".." for each directory in $ac_dir_suffix. zomg-0.8.1/configure:5054: ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` zomg-0.8.1/configure-5055- case $ac_top_builddir_sub in ############################################## zomg-0.8.1/configure-5112-/@mandir@/p' zomg-0.8.1/configure:5113:case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in zomg-0.8.1/configure-5114-*datarootdir*) ac_datarootdir_seen=yes;; ############################################## zomg-0.8.1/configure-5129- zomg-0.8.1/configure:5130:# Neutralize VPATH when `$srcdir' = `.'. zomg-0.8.1/configure-5131-# Shell code in configure.ac might set extrasub. ############################################## zomg-0.8.1/configure-5157-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && zomg-0.8.1/configure:5158: { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && zomg-0.8.1/configure-5159- { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ ############################################## zomg-0.8.1/configure-5201- # Strip MF so we end up with the name of the file. zomg-0.8.1/configure:5202: am_mf=`$as_echo "$am_mf" | sed -e 's/:.*$//'` zomg-0.8.1/configure-5203- # Check whether this is an Automake generated Makefile which includes ############################################## zomg-0.8.1/compile-67- mingw/*) zomg-0.8.1/compile:68: file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'` zomg-0.8.1/compile-69- ;; zomg-0.8.1/compile-70- cygwin/*) zomg-0.8.1/compile:71: file=`cygpath -m "$file" || echo "$file"` zomg-0.8.1/compile-72- ;; zomg-0.8.1/compile-73- wine/*) zomg-0.8.1/compile:74: file=`winepath -w "$file" || echo "$file"` zomg-0.8.1/compile-75- ;; ############################################## zomg-0.8.1/compile-310-# Name of file we expect compiler to create. zomg-0.8.1/compile:311:cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'` zomg-0.8.1/compile-312- ############################################## zomg-0.8.1/compile-316-# object file name, since that is what matters with a parallel build. zomg-0.8.1/compile:317:lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d zomg-0.8.1/compile-318-while true; do ############################################## zomg-0.8.1/zomg.m4-18- zomg-0.8.1/zomg.m4:19:ifdef(`ZOMG_MONOLITHIC', define(`zomgm4grab', `include(`$1')'), zomg-0.8.1/zomg.m4-20-`define(`zomgm4grab', `source @pkgdatadir@/$1')')dnl ############################################## zomg-0.8.1/aclocal.m4-131- PKG_CHECK_EXISTS([$3], zomg-0.8.1/aclocal.m4:132: [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null` zomg-0.8.1/aclocal.m4-133- test "x$?" != "x0" && pkg_failed=yes ], ############################################## zomg-0.8.1/aclocal.m4-179- if test $_pkg_short_errors_supported = yes; then zomg-0.8.1/aclocal.m4:180: $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1` zomg-0.8.1/aclocal.m4-181- else zomg-0.8.1/aclocal.m4:182: $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1` zomg-0.8.1/aclocal.m4-183- fi ############################################## zomg-0.8.1/aclocal.m4-368-# iff we strip the leading $srcdir from $ac_aux_dir. That would be: zomg-0.8.1/aclocal.m4:369:# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` zomg-0.8.1/aclocal.m4-370-# and then we would define $MISSING as ############################################## zomg-0.8.1/aclocal.m4-383-# Expand $ac_aux_dir to an absolute path. zomg-0.8.1/aclocal.m4:384:am_aux_dir=`cd "$ac_aux_dir" && pwd` zomg-0.8.1/aclocal.m4-385-]) ############################################## zomg-0.8.1/aclocal.m4-481- if test "$am_compiler_list" = ""; then zomg-0.8.1/aclocal.m4:482: am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` zomg-0.8.1/aclocal.m4-483- fi ############################################## zomg-0.8.1/aclocal.m4-634- # Strip MF so we end up with the name of the file. zomg-0.8.1/aclocal.m4:635: am_mf=`AS_ECHO(["$am_mf"]) | sed -e 's/:.*$//'` zomg-0.8.1/aclocal.m4-636- # Check whether this is an Automake generated Makefile which includes ############################################## zomg-0.8.1/aclocal.m4-641- || continue zomg-0.8.1/aclocal.m4:642: am_dirpart=`AS_DIRNAME(["$am_mf"])` zomg-0.8.1/aclocal.m4:643: am_filepart=`AS_BASENAME(["$am_mf"])` zomg-0.8.1/aclocal.m4-644- AM_RUN_LOG([cd "$am_dirpart" \ ############################################## zomg-0.8.1/aclocal.m4-709-AC_REQUIRE([AC_PROG_INSTALL])dnl zomg-0.8.1/aclocal.m4:710:if test "`cd $srcdir && pwd`" != "`pwd`"; then zomg-0.8.1/aclocal.m4-711- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output ############################################## zomg-0.8.1/aclocal.m4-868- * ) zomg-0.8.1/aclocal.m4:869: _am_stamp_count=`expr $_am_stamp_count + 1` ;; zomg-0.8.1/aclocal.m4-870- esac zomg-0.8.1/aclocal.m4-871-done zomg-0.8.1/aclocal.m4:872:echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) zomg-0.8.1/aclocal.m4-873- ############################################## zomg-0.8.1/aclocal.m4-1124- echo "timestamp, slept: $am_has_slept" > conftest.file zomg-0.8.1/aclocal.m4:1125: set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` zomg-0.8.1/aclocal.m4-1126- if test "$[*]" = "X"; then zomg-0.8.1/aclocal.m4-1127- # -L didn't work. zomg-0.8.1/aclocal.m4:1128: set X `ls -t "$srcdir/configure" conftest.file` zomg-0.8.1/aclocal.m4-1129- fi ############################################## zomg-0.8.1/Makefile.in-52- { \ zomg-0.8.1/Makefile.in:53: flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ zomg-0.8.1/Makefile.in-54- }; \ ############################################## zomg-0.8.1/Makefile.in-120- $(AM_LDFLAGS) $(LDFLAGS) -o $@ zomg-0.8.1/Makefile.in:121:am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; zomg-0.8.1/Makefile.in-122-am__vpath_adj = case $$p in \ zomg-0.8.1/Makefile.in:123: $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ zomg-0.8.1/Makefile.in-124- *) f=$$p;; \ zomg-0.8.1/Makefile.in-125- esac; zomg-0.8.1/Makefile.in:126:am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; zomg-0.8.1/Makefile.in-127-am__install_max = 40 zomg-0.8.1/Makefile.in-128-am__nobase_strip_setup = \ zomg-0.8.1/Makefile.in:129: srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` zomg-0.8.1/Makefile.in-130-am__nobase_strip = \ ############################################## zomg-0.8.1/Makefile.in-533-.c.obj: zomg-0.8.1/Makefile.in:534:@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` zomg-0.8.1/Makefile.in-535-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po ############################################## zomg-0.8.1/Makefile.in-537-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ zomg-0.8.1/Makefile.in:538:@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` zomg-0.8.1/Makefile.in-539- zomg-0.8.1/Makefile.in-540-zomghelper-zomghelper.o: zomghelper.c zomg-0.8.1/Makefile.in:541:@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(zomghelper_CFLAGS) $(CFLAGS) -MT zomghelper-zomghelper.o -MD -MP -MF $(DEPDIR)/zomghelper-zomghelper.Tpo -c -o zomghelper-zomghelper.o `test -f 'zomghelper.c' || echo '$(srcdir)/'`zomghelper.c zomg-0.8.1/Makefile.in-542-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/zomghelper-zomghelper.Tpo $(DEPDIR)/zomghelper-zomghelper.Po ############################################## zomg-0.8.1/Makefile.in-544-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ zomg-0.8.1/Makefile.in:545:@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(zomghelper_CFLAGS) $(CFLAGS) -c -o zomghelper-zomghelper.o `test -f 'zomghelper.c' || echo '$(srcdir)/'`zomghelper.c zomg-0.8.1/Makefile.in-546- zomg-0.8.1/Makefile.in-547-zomghelper-zomghelper.obj: zomghelper.c zomg-0.8.1/Makefile.in:548:@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(zomghelper_CFLAGS) $(CFLAGS) -MT zomghelper-zomghelper.obj -MD -MP -MF $(DEPDIR)/zomghelper-zomghelper.Tpo -c -o zomghelper-zomghelper.obj `if test -f 'zomghelper.c'; then $(CYGPATH_W) 'zomghelper.c'; else $(CYGPATH_W) '$(srcdir)/zomghelper.c'; fi` zomg-0.8.1/Makefile.in-549-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/zomghelper-zomghelper.Tpo $(DEPDIR)/zomghelper-zomghelper.Po ############################################## zomg-0.8.1/Makefile.in-551-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ zomg-0.8.1/Makefile.in:552:@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(zomghelper_CFLAGS) $(CFLAGS) -c -o zomghelper-zomghelper.obj `if test -f 'zomghelper.c'; then $(CYGPATH_W) 'zomghelper.c'; else $(CYGPATH_W) '$(srcdir)/zomghelper.c'; fi` zomg-0.8.1/Makefile.in-553- zomg-0.8.1/Makefile.in-554-zomghelper_xspf-zomghelper-xspf.o: zomghelper-xspf.c zomg-0.8.1/Makefile.in:555:@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(zomghelper_xspf_CFLAGS) $(CFLAGS) -MT zomghelper_xspf-zomghelper-xspf.o -MD -MP -MF $(DEPDIR)/zomghelper_xspf-zomghelper-xspf.Tpo -c -o zomghelper_xspf-zomghelper-xspf.o `test -f 'zomghelper-xspf.c' || echo '$(srcdir)/'`zomghelper-xspf.c zomg-0.8.1/Makefile.in-556-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/zomghelper_xspf-zomghelper-xspf.Tpo $(DEPDIR)/zomghelper_xspf-zomghelper-xspf.Po ############################################## zomg-0.8.1/Makefile.in-558-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ zomg-0.8.1/Makefile.in:559:@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(zomghelper_xspf_CFLAGS) $(CFLAGS) -c -o zomghelper_xspf-zomghelper-xspf.o `test -f 'zomghelper-xspf.c' || echo '$(srcdir)/'`zomghelper-xspf.c zomg-0.8.1/Makefile.in-560- zomg-0.8.1/Makefile.in-561-zomghelper_xspf-zomghelper-xspf.obj: zomghelper-xspf.c zomg-0.8.1/Makefile.in:562:@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(zomghelper_xspf_CFLAGS) $(CFLAGS) -MT zomghelper_xspf-zomghelper-xspf.obj -MD -MP -MF $(DEPDIR)/zomghelper_xspf-zomghelper-xspf.Tpo -c -o zomghelper_xspf-zomghelper-xspf.obj `if test -f 'zomghelper-xspf.c'; then $(CYGPATH_W) 'zomghelper-xspf.c'; else $(CYGPATH_W) '$(srcdir)/zomghelper-xspf.c'; fi` zomg-0.8.1/Makefile.in-563-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/zomghelper_xspf-zomghelper-xspf.Tpo $(DEPDIR)/zomghelper_xspf-zomghelper-xspf.Po ############################################## zomg-0.8.1/Makefile.in-565-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ zomg-0.8.1/Makefile.in:566:@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(zomghelper_xspf_CFLAGS) $(CFLAGS) -c -o zomghelper_xspf-zomghelper-xspf.obj `if test -f 'zomghelper-xspf.c'; then $(CYGPATH_W) 'zomghelper-xspf.c'; else $(CYGPATH_W) '$(srcdir)/zomghelper-xspf.c'; fi` zomg-0.8.1/Makefile.in-567-install-man1: $(dist_man_MANS) ############################################## zomg-0.8.1/Makefile.in-571- test -n "$(man1dir)" \ zomg-0.8.1/Makefile.in:572: && test -n "`echo $$list1$$list2`" \ zomg-0.8.1/Makefile.in-573- || exit 0; \ ############################################## zomg-0.8.1/Makefile.in-628- @list='$(pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \ zomg-0.8.1/Makefile.in:629: files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ zomg-0.8.1/Makefile.in-630- dir='$(DESTDIR)$(pkgdatadir)'; $(am__uninstall_files_from_dir) ############################################## zomg-0.8.1/Makefile.in-661-GTAGS: zomg-0.8.1/Makefile.in:662: here=`$(am__cd) $(top_builddir) && pwd` \ zomg-0.8.1/Makefile.in-663- && $(am__cd) $(top_srcdir) \ ############################################## zomg-0.8.1/Makefile.in-696- test -d "$(distdir)" || mkdir "$(distdir)" zomg-0.8.1/Makefile.in:697: @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ zomg-0.8.1/Makefile.in:698: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ zomg-0.8.1/Makefile.in-699- list='$(DISTFILES)'; \ ############################################## zomg-0.8.1/Makefile.in-710- if test -d $$d/$$file; then \ zomg-0.8.1/Makefile.in:711: dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ zomg-0.8.1/Makefile.in-712- if test -d "$(distdir)/$$file"; then \ ############################################## zomg-0.8.1/Makefile.in-796- test -d $(distdir)/_build || exit 0; \ zomg-0.8.1/Makefile.in:797: dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ zomg-0.8.1/Makefile.in-798- && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ ############################################## zomg-0.8.1/Makefile.in-840- }; \ zomg-0.8.1/Makefile.in:841: test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ zomg-0.8.1/Makefile.in-842- || { echo "ERROR: files left after uninstall:" ; \ ############################################## zomg-0.8.1/Makefile.in-852- fi zomg-0.8.1/Makefile.in:853: @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ zomg-0.8.1/Makefile.in-854- || { echo "ERROR: files left in build directory after distclean:" ; \ ############################################## zomg-0.8.1/depcomp-64- case $1 in zomg-0.8.1/depcomp:65: */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;; zomg-0.8.1/depcomp-66- *) dir=;; ############################################## zomg-0.8.1/depcomp-73-{ zomg-0.8.1/depcomp:74: base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'` zomg-0.8.1/depcomp-75-} ############################################## zomg-0.8.1/depcomp-126- sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} zomg-0.8.1/depcomp:127:tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} zomg-0.8.1/depcomp-128- ############################################## zomg-0.8.1/depcomp-405- sleep 1 zomg-0.8.1/depcomp:406: i=`expr $i - 1` zomg-0.8.1/depcomp-407- done zomg-0.8.1/depcomp-408- fi zomg-0.8.1/depcomp:409: i=`expr $i - 1` zomg-0.8.1/depcomp-410- done ############################################## zomg-0.8.1/depcomp-425- # Do two passes, one to just change these to zomg-0.8.1/depcomp:426: # `$object: dependent.h' and one to simply `dependent.h:'. zomg-0.8.1/depcomp-427- sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" ############################################## zomg-0.8.1/depcomp-659- done zomg-0.8.1/depcomp:660: obj_suffix=`echo "$object" | sed 's/^.*\././'` zomg-0.8.1/depcomp-661- touch "$tmpdepfile" ############################################## zomg-0.8.1/install-sh-234- fi zomg-0.8.1/install-sh:235: cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; zomg-0.8.1/install-sh-236- *) ############################################## zomg-0.8.1/install-sh-280- dstdir=$dst zomg-0.8.1/install-sh:281: dstbase=`basename "$src"` zomg-0.8.1/install-sh-282- case $dst in ############################################## zomg-0.8.1/install-sh-287- else zomg-0.8.1/install-sh:288: dstdir=`dirname "$dst"` zomg-0.8.1/install-sh-289- test -d "$dstdir" ############################################## zomg-0.8.1/install-sh-354- test_tmpdir="$tmpdir/a" zomg-0.8.1/install-sh:355: ls_ld_tmpdir=`ls -ld "$test_tmpdir"` zomg-0.8.1/install-sh-356- case $ls_ld_tmpdir in ############################################## zomg-0.8.1/install-sh-361- $mkdirprog -m$different_mode -p -- "$test_tmpdir" && { zomg-0.8.1/install-sh:362: ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"` zomg-0.8.1/install-sh-363- test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" ############################################## zomg-0.8.1/install-sh-419- case $prefix in zomg-0.8.1/install-sh:420: *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; zomg-0.8.1/install-sh-421- *) qprefix=$prefix;; ############################################## zomg-0.8.1/install-sh-468- if $copy_on_change && zomg-0.8.1/install-sh:469: old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && zomg-0.8.1/install-sh:470: new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && zomg-0.8.1/install-sh-471- set -f &&