ST STM8¶

Configuration: platform = ststm8

The STM8 is an 8-bit microcontroller family by STMicroelectronics an extended variant of the ST7 microcontroller architecture. STM8 microcontrollers are particularly low cost for a full-featured 8-bit microcontroller.

For more detailed information please visit vendor site.

Contents

Examples
Debugging
Stable and upstream versions
Packages
Frameworks
Boards

Examples ¶

Examples are listed from ST STM8 development platform repository:

Debugging ¶

PIO Unified Debugger - “1-click” solution for debugging with a zero configuration.

Tools & Debug Probes
- On-Board Debug Tools

Tools & Debug Probes ¶

Supported debugging tools are listed in “Debug” column. For more detailed information, please scroll table by horizontal. You can switch between debugging Tools & Debug Probes using debug_tool option in “platformio.ini” (Project Configuration File).

Warning

You will need to install debug tool drivers depending on your system. Please click on compatible debug tool below for the further instructions.

On-Board Debug Tools ¶

Boards listed below have on-board debug probe and ARE READY for debugging! You do not need to use/buy external debug probe.

Name	MCU	Frequency	Flash	RAM
ST STM8S-DISCOVERY	STM8S105C6T6	16MHz	32KB	2KB

Stable and upstream versions ¶

You can switch between stable releases of ST STM8 development platform and the latest upstream version using platform option in “platformio.ini” (Project Configuration File) as described below.

Stable¶

; Latest stable version
[env:latest_stable]
platform = ststm8
board = ...

; Custom stable version
[env:custom_stable]
platform = ststm8@x.y.z
board = ...

Upstream¶

[env:upstream_develop]
platform = https://github.com/platformio/platform-ststm8.git
board = ...

Packages ¶

Name	Description
framework-arduinoststm8	Arduino Wiring-based Framework (STM8 Core)
framework-ststm8spl	STM8S/A Standard peripheral library
tool-openocd	OpenOCD
tool-stm8binutils	STM8 GNU binutils
tool-stm8tools	STM8 upload tools
toolchain-sdcc	Small Device C Compiler

Warning

Linux Users:

Install “udev” rules 99-platformio-udev.rules

Raspberry Pi users, please read this article Enable serial port on Raspberry Pi.

Windows Users:

Please check that you have a correctly installed USB driver from board manufacturer

Frameworks ¶

Name	Description
Arduino	Arduino Wiring-based Framework allows writing cross-platform software to control devices attached to a wide range of Arduino boards to create all kinds of creative coding, interactive objects, spaces or physical experiences.
SPL	The ST Standard Peripheral Library provides a set of functions for handling the peripherals on the STM32 Cortex-M3 family. The idea is to save the user (the new user, in particular) having to deal directly with the registers.

Boards ¶

Note

You can list pre-configured boards by platformio boards command or PlatformIO Boards Explorer
For more detailed board information please scroll the tables below by horizontally.

ST¶

Name	Debug	MCU	Frequency	Flash	RAM
ST STM8S-DISCOVERY	On-board	STM8S105C6T6	16MHz	32KB	2KB
ST STM8S103F3 Breakout Board	No	STM8S103F3P6	16MHz	8KB	1KB
ST STM8S105K4T6 Breakout Board	No	STM8S105K4T6	16MHz	16KB	2KB

sduino¶

Name	Debug	MCU	Frequency	Flash	RAM
sduino MB (STM8S208MBT6B)	No	STM8S208MBT6	16MHz	128KB	6KB
sduino UNO (STM8S105K6)	No	STM8S105K6T6	16MHz	32KB	2KB